Tech Problem Aggregator

Lenovo G580 20157 bios 62cn97ww update problem

Q: Lenovo G580 20157 bios 62cn97ww update problem

Hi, I have lenovo G580 20157 laptop with windows 8 pro, i found a bios update 62cn97ww on support site but when i restarted my laptop and run the 62cn97ww update it just hangs and does not respond. kept ideal for long time to restart but no response. Any help on this?

A: Lenovo G580 20157 bios 62cn97ww update problem

hi adarsh_savant,

I think you may have concern in this thread,
http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/G580-Bios-update-problem/m-p/1199186/highlight...

Here the suggested solution from neokenchi that helped.

1. Boot into the BIOS by repeatedly tapping F2 on startup

2. In the BIOS, navigate to the Boot Tab and set UEFI to Disabled or Legacy then press F10 to save and exit. When
the computer reboots, check if you still get the errors and/or if you're able to boot into Windows.

3. If same problem, leave the changes that you made on Step 2 and attempt to re-install Windows via a Windows 8 recovery drive or OneKey Recovery button (note that this will wipe the computer to factory settings)

Hope this helps,
Cheers!



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 94.2%

A friend had a malware attack, a beeping error on Chrome about a Windows Defender error running Win 10. She managed to shut down Chrome and then shut off her computer. She tried turn back on, but it would not. I managed to start the computer by removing battery , AC power and the bios battery. The only way to turn on is to remove all of the above and then reinsert bios battery and connect AC power. The keyboard does not work properly, types mostly 6s and a few other characters (ie the shift key types an 's'). No wifi, no CD, no mouse touchpad. I can get into Windows 8, which I restored from factory partiton. Did not affect the operation. I assumed that the bios must have been over written, so I downloaded an update, but it will not install. Program goes through the motions, but the old bios is still there. I am using an external USB KB and mouse. I still can not get into the bios. Is there a way to "force" a bios update?

More replies
Answer Match 84.3%

I own a lenovo g580 20157 model laptop. I am facing issues like its heating up a lot while playing games.i started facing all this problems after i updated the bios to 62cn40ww. Now i face fps drops. the games i used to play on my laptop with old bios, now started lagging. I also can't find the old bios file on support page. kindly advice.

A:Lenovo G580 20157 Performance.

Hi Puneet,
 
Welcome to Lenovo Forums.
 
We are really sorry to hear about the issue you are facing.
 
Firstly, Check BIOS? Sometimes a BIOS has fan speed controls.
 
This is normal as the game is running and full GPU is utilized, if the temp increases more than normal.  I suggest you to use the Laptop by placing it on a flat surface for good ventilation.
 
Please go through the below link to understand about Safe Temperature range for CPU?
 

Click Here
Click Here

 
You can refer the below thread for BIOS downgrade
 
Click here
 
Hope this helps.
 
Regards,
Shashi Kumar
 
-------------------------------------------------------------------------------------------------------------------------------------------
Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

8 more replies
Answer Match 84.42%

Hello I have problem with bios update i have Windows 10 Pro 64bit (Installed yesterday) and i cant update bios because TDK error 255, i try run program on W7 64bit, W8 64bit and W10 Pro 64bit, but program doesnt run properly, so do you have any tips ? I was trying to run in Diagnostic mode, Safe boot etc..., but nothing happens.Another solution is Flash bios, but i am not Proffesional in bios, so i am worrying about crash my laptop, if i do it wrong my laptop will doesnt run, so i if you have any good guide how to do it right please help me.Thank for comment. Picture of error: http://imgur.com/AMZcV85 Specs from CPU-Z:CPU: http://imgur.com/a/3O3unMainboard: http://imgur.com/a/0I4m8 

More replies
Answer Match 83.58%

hi, i just updated my windows 7 to windows 10. should i update my bios?i see no update for windows 10, the latest is only for windows 8.1.this is the current bios i am usingSMBIOSBIOSVersion5ECN39WW(V3.05)thanks

A:lenovo g580 20150 latest bios.

My rule of thumb with BIOS updates is "if it is not broke, do not try to fix it" because there is always an inherent risk that a BIOS update can fail, and if so, leave  the system bricked (dead) requirnig a new motherboard, and there does not appear to be anything in the latest updates readme.txt other than specific fixes for Windows 8.1... So I would hold off. Summary of changes
==================
General Information:
Fixed:
1. Modified small number keys (such as the key U, I, O) matrix for win8. Cheers, 

1 more replies
Answer Match 83.58%

Hello, The Problem:Recently I installed Ubuntu 14.04.1 LTS  to my HDD in UEFI mode. Soon I found out that I could not access the BIOS using F2, but F12 allowed selection of boot device. Reinstalling Windows, I found out that the boot menu still had the Ubuntu entry and I still could not access the BIOS. I searched on the web for a solution and before I could manage to find a proper one, I managed to delete both the ubuntu and windows boot manager boot entries, still locked out of bios. This time I could not boot into any OS, could not access bios using f2 nor access boot menu using f12.  The Solution:There was one last hope, during boot I noticed that PXE (Boot via ethernet option was still showing).Note: This solution requires you to update the BIOS. This is a very risky procedure, so proceed with caution. This will also probably void your warranty. If you can access boot menu (F12) and want to regain access to the BIOS (F2), boot into Windows 7. Install a bios update for your laptop (specifically for your laptop) available at The Lenovo Support Site. The oldest BIOS (probably for Windows 7) is preffered. If you donot have access to windows 7, perform step 2 and boot into the created ISO by creating a bootable CD or pendrive. Then goto step 11.If you can't access F12 and F2, cannot boot into OS, but can boot via Ethernet (there should be a message about trying Atheros Ethernet PXE Boot during startup), start from step 1. Perform the following steps on a s... Read more

A:Lenovo G580 cannot access BIOS after installing Ub...

Update: Even in the newest BIOS Update 62cn97ww (for Lenovo G580), Ubuntu causes the same problem. I came across a solution on the internet, that works without having to update the BIOS if Ubuntu can be accessed. To fix it, boot into Ubuntu (should be installed on the system), start Terminal and type in the following commands:sudo grub-install
sudo efibootmgr -b 0 -BReboot and F2 should work. BIOS should be accessible through F12>Tab>Setup also. Ubuntu will boot no more but can probably be fixed.

8 more replies
Answer Match 82.74%

Hi

I got a new Lenovo G580 laptop which did not come with any pre-installed OS. I installed Ubuntu in UEFI mode (I had not disabled UEFI/Secure Boot). Later I installed Windows 7. During installation it asked me to format the entire format as it did not recognize the GPT partition. Accordingly without thinking twice I erased the entire HDD and installed Windows 7. Now I am unable to enter into BIOS

Things I have tried:
Tried with F2, F1 and Delete keys while booting
Tried removing the battery and booting while pressing the above keys individually
Tried removing the battery and adapter, held the power button for 1 minute
Tried removing the battery and held the power button for 1 minute while the adapter was plugged in
Tried pressing F12 and going to the APP MENU but I can only see "Diagnostic Splash" Nothing else and in that diagnostic splash screen I see that the System BIOS is "shadowed"
How can i gain access to BIOS so I can disable UEFI and install Win 7 and Ubuntu side by side
 

More replies
Answer Match 82.74%

Please assist as I did the following steps to access the BIOS, it hangs:1. Shut down the computer2. Press the "Recovery Button" NOT THE POWER BUTTON (A small round button with curve arrow sign which is located on the left side of the Power Button just next to the dust removal opening on the left side of the laptop)3. Selected the BIOS Setup and nothing happens. I cannot even choose the boot option. If I put a pendrive with ubuntu, It picks it up, but not the Windows pendrive.My original HDD has bad sectors and cannot clone it. Any Ideas on how to help me?

More replies
Answer Match 80.64%

Hi,
My daughters laptop has me baffled. It started with a blank screen issue, which I solved with a system restore. (theres was nothing of importance on the hard drive) I did try taking the battery out and after replacing holding the start button for 30 seconds first.
All appeared fine untill I shut it down. There was a massive 186 windows updates to do, which was expected after rolling back so far...
The issue now is a I get this message on the screen "failure to configure updates, reverting changes. do not turn off you computer. I get stuck with this screen with no change, I even left it over night.
I haven't managed to find the safe boot option with this Win 8 machine, I tried the F8 key on start up but no joy.
Has anyone solved this problem before?
Thanks in advance
Marty

A:Lenovo G580 Win 8 laptop update issues

Did you revert back from windows 10?

1 more replies
Answer Match 76.02%

Hi
I have a Lenovo g580 with windows 7 home premium 64 bit, whenever it goes to sleep, in whatever way, I get a black screen telling me that windows did not shutdown successfully.

I have completed a system restore to factory settings and downloaded and installed all updates. I have also run all Lenovo diagnostics to no avail.

I have changed the settings in power options, the bios has no power option.

I would appreciate any help

Many thanks
 

A:Lenovo G580 Sleep Problem

6 more replies
Answer Match 76.02%

Hi
I have a Lenovo g580 with windows 7 home premium 64 bit, whenever it goes to sleep, in whatever way, I get a black screen telling me that windows did not shutdown successfully.
I have completed a system restore to factory settings and downloaded and installed all updates. I have also run all Lenovo diagnostics to no avail.
I have changed the settings in power options, the bios has no power option.
I would appreciate any help
Many thanks

More replies
Answer Match 76.02%

Hello.

I have a Lenovo G580 with Windows 8. I have a weird problem with audio. If the default audio is set as internal speakers and I plug in my headphones the sound just keeps coming from the internal speakers. But if I set the headphones as default, I can switch between the speakers and headphones as I want and there is no problem if only I play music from my computer.

If I try to play something from my browser, however, the sound only comes from the internal speakers and connecting the headphones does nothing. Except (and this is where it gets weird) if I play something from my computer first using the headphones. Then I can play anything from the browser and hear it through the headphones as long as I don't plug them out. If I plug them out, the sound switches back to the internal speakers and trying to plug in the headphones again doesn't do anything. So I have to play something from my computer again with the headphones plugged in and then switch to my browser to again play everything through my headphones.

What's wrong with it? Any way to make it work as it should work?

A:Lenovo G580 audio problem

Hi lenny111, first question would be what make of audio chip and have you downloaded the latest 8.1 drivers?

10 more replies
Answer Match 75.18%

Hello,Recently I have reinstalled Windows 10 updated from 8.1 (where everything was OK) to clean Windows 10 installation (changed HDD to SSD).Everything is fine, except one single issue - integrated camera is not working.- Camera indicator is always on (white LED is always turned on)- There are NO imaging devices in Device Manager- In Device Manager is one warning - Unknown USB Device (Device Descriptor Request Failed), Location: Port_#0006.Hub_#0005, with status with error code 43. Is there any way to solve this problem? If you need any additional info, I am here to provide Thank you in advance!

More replies
Answer Match 71.82%

Dear Lenovo Staff,I'm experiencing multiple issues running Ubuntu on Lenovo Y700-17ISK laptop:https://forums.lenovo.com/t5/Linux-Discussion/Problems-running-Ubuntu-on-Lenovo-Y700-17ISK/td-p/3278... At the end, I installed Windows 10 alongside with Ubuntu 16.04 only because of BIOS updating.During the last month or two, it was impossible to find any BIOS file on 'Y700-17ISK Laptop - Lenovo Support' web page.Today I finally found a new BIOS update file: Released 7/18/2016, Version CDCN35WW. But when - hoping to solve problems running Ubuntu on Lenovo Y700 - I attempted to install this latest BIOS update file through Windows 10, I got the following error message: "the version of ROM file is the same as that of BIOS". And then I found this forum post (05-18-2016):"Please be advised that Lenovo is in the process of removing the BIOS CDCN35WW for ideapad Y700-15ISK, Y700 Touch-15ISK, and Y700-17ISK laptops in response to customer reports that the software does not execute as expected. Once the issue has been corrected, CDCN35WW or a newer version of the BIOS will be made available". Once the issue has been corrected, CDCN35WW version of the BIOS will be made available again????????So I downgraded my BIOS CDCN35WW to BIOS CDCN30WW, and after that I installed again BIOS CDCN35WW - everything went well, but now my BIOS shows it is CDCN30WW version??? I would be very grateful for any help, thanks in advance.

A:PROBLEM: BIOS UPDATE FOR LENOVO Y700-17ISK Laptop

My Bios is CDCN34WW so I did upgrade to version CDCN35WW (latest from 18.07.2016) installation went very good,no errors or problems diuring instalation proces but after rebot my computer shows that I'am still on CDCN34WW version.What's i should do now...?

3 more replies
Answer Match 70.14%

My g580 ran out of battery while using it, and now it gets stuck on the lenovo logo. I tried a different hard drive which changed nothing, I've tested both hard drives on a different computer and they both work. However when I boot the laptop with no harddrive it will get past the logo go to a screen saying something about an unplugged cable then reset and get stuck on a blank screen.   If I plug in my windows recovery usb drive( and no harddrive) the the machine will boot normally and go to the windows installation screen. So any ideas on why a working harddrive would stop the system from booting? Also I've tried the whole taking out the battery unplugging it holding down the power key and then plugging it back in thing, did nothing. 

More replies
Answer Match 67.62%

Hello everyone! I ama new user and i am coming up with this post as I couldn`t find any kind of solution for my problem.Recently I decided to do a reinstallation of my operating system, which also previously was Windows 7 Ultimate (x64). The installation went as usual, and after finishing it I went on to install all the latest drivers from the Lenovo site, for my product. When getting close to installing almost all the drivers i`ve needed, i stumbled upon a new version of the BIOS amnd the drivers and sfotware recommended for my laptop, by the producer. So i proceeded to install the upgrade, restarted the computer when it prompted me to do so, but after the so-called restart the laptop did not boot up as usual. At first it was telling me to not do anything as the BIOS is being flashed and then it was telling me something about some sort of image processing, things that i did not understand at the time (i have never encountered anything like that). After that my screen turned black. I have not done anything for a few couple of minutes as i thought it was supposed to be like that, but then i just force shut it down and unplugged the AC adapter. When trying to boot it all up again, the only thing i got was a black screen and nothing else.After doing a little bit of research it appears that, somehowm i`ve managed to corrupt the bios on my laptop or something, and nothing else would work at this point. I tried to remove the BIOS battery and the ram and then put them all back, trye... Read more

More replies
Answer Match 64.68%

I had G580 with Win10 updated from Win8. After disk replace to Samsung EVO 850 computer do not boot. Only LCD was turn on and it has silver color (background light only). When I put on it stock disk everythink run ok, but I can not access bios. Then I was remove BIOS battery to check if it will possible to access BIOS. From that moment is G580 black-screen, does not boot with stock HDD, do not install WIN10 from recovery DVD, restore button does not work, battery remove and turning on for resset does not working.. Nothig. Laptop turn ON but screen is black. Never happend this before with any laptop. I google and try almost every hint.

More replies
Answer Match 64.68%

Hello, I have an Lenovo G580 Celeron Dual core 1,8 Ghz, 2Gb DDR3, the pocessor is B830 I think.My question is what kind of processor should I upgrade from i3 series or i5 series?I have a list with a lot of models with socket G2 but I'm not sure if all are suitable.This is the list: http://www.cpu-upgrade.com/CPUs/Intel/Mobile_Celeron_Dual-Core/B830.html Can anybody help me? Thanks,

More replies
Answer Match 64.68%

Can i put this "Ultrabay Graphics Card GT750M or GT755M" in my g580 lenovo?

A:Lenovo g580 question

Hi Shadowraze , 
 
Welcome to the Community Forums.
 
Ultrabay swappable drive bay in the ThinkPad range of laptop computers and some of IdeaPad Y Series laptops. Graphics cards would not be recognized by the BIOS unlike y410p/y510p . 
 
Regards
 
 

1 more replies
Answer Match 64.68%

Hello, ive bought G580 2 years ago, but now is this type little low-end, so i need upgrade RAM and CPU for better, but i dont know which can i put in, my parameters from AIDA64:CPU: http://imgur.com/a/d5qiNCPUID:http://imgur.com/a/6cKA2MOTHERBOARD:http://imgur.com/a/L8dQLBIOS:http://imgur.com/a/WcaPQ North Bridge:CHIPSET1:http://imgur.com/a/eubRPCHIPSET2:http://imgur.com/a/aiEsk South Bridge: CHIPSET:http://imgur.com/a/CewhQ SPD:http://imgur.com/a/WT8fP If you need more i will send, just write me what.

More replies
Answer Match 64.68%
Answer Match 64.68%

I have a g580 with win 10 and ubuntu14. Problem started a day ago, i am unable to turn on the wifi in windows. The option is not even highlighted. Diagnostics told me that wireless connections are turned of so i tried FN +F5 but still no change . Drivers are uptodate. Everything is working fine on linux. Any solution.

More replies
Answer Match 64.68%

Can i put this "Ultrabay Graphics Card GT750M or GT755M" in my g580 lenovo?

More replies
Answer Match 64.68%

Hello guys, i just bought a lenovo g580, and i am not happy with the fps I am getting. I want to play Counter Strike Global offensive.I want to ask what parts can i change on my laptop so i can get a bit better fps?So my parts are: i7 2620m witch is dual core with 4 threads on 2.7 ghz turbo boostIt also has 1x2gb ram and 1x4gb ram.Video is GForce 630m and 1 tb hard drive.CPU Socket is 988B rPGAI know I can upgrade ram and get an SSD . But can I change the processor and the video card? And also is it worth getting anymore than the 6 gb of RAM.Thank you. 

More replies
Answer Match 64.68%

HiI have Lenovo G580(59337073) with Celeron B820.is it possible to upgrade the CPU to Intel core i3(i5) 3rd generation(Ivy Bridge)? thx 

A:Lenovo G580 CPU upgrade

Hi
 
Welcome to the community.
 
Please find below the supported Processor of your system, you can use any one of them.
 
3rd generation Intel Core i5-3210M 2nd generation Intel Core i3-2370M Intel Celeron B820 (1.60GHz, 2MB) 
 
Regards,
Sameer



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 63.84%

While charging my lenovo g580, for first couple of minutes it gets charged but after that it stars to toggle bw charging and not charging msg continuously.https://m.youtube.com/watch?v=MmYNPzxg0xoAbove link shows the problem

More replies
Answer Match 63.84%

Hi,
I would like to know if my laptop is compatible with Windows Vista SP1 x64.I tried to install it,but when i rebooted the first time,it gave me a blue screen.I can't even boot into Safe Mode,or Last Known Good Configuration.I know Vista SP1 is compatible with UEFI,right?

A:Lenovo G580 20150 compatibility

Do not worry about compatibility. You must meet the minimum requirements.
What is windows vista?
Scroll a bit down the page
Then click on Vista Premium
https://www.thomas-krenn.com/en/wiki...s_in_UEFI-mode

27 more replies
Answer Match 63.84%

HelloI have a Lenovo G580 laptop with windows 7.I used it for about 2 years and 1 month ago my laptop diesthe laptop does not work and does not have any sign of electric. it does not work with the AC adaptor or with the battery, so the issue was in the motherboard, i bought a new motherboard and replaced the old one with the new (used), then the laptop back to  life againbut the problem is the laptop does not function with the battery, when I plugging the AC adaptor the charging lamp Lighting up and when I run the windows the battery indicator show (92% in charge) for hours and when i unplug the ac adaptor computer shuts down instantly.Please advise .Thank you !

More replies
Answer Match 63.84%

 ?  ?  ? My Lenovo G580 says "Lenovo" and didnt want to startup. I had try really many tutorials, i ude this pc for my school and i really need it to works please help me guys???? 

More replies
Answer Match 63.84%

Hi.I have a G580 laptop, and its gets my gray hair :-) The keyboard is working very strange, the number keys dont work 1-2-3-4-5-6-7-8-9-0, the numlock is not working eighter, i have to enable capslock the write smalle letters, i cant log into windows because my password is with numbers, i have tried to clean my laptop twice, every time it come up with a windows default account wich i don know the password for, i cant boot up in safe mode because i dont have the right paasword. As you can see i am pretty stocked her.. Please Help....

More replies
Answer Match 63.84%

Recently bought a new Lenovo G580 to replace my old decrepit Toshiba. It worked fine for a couple of days, but suddenly started BSOD-ing as I began to use the laptop more and more.

I have noticed it is more susceptible to BSOD-ing when I am running Bit Torrent. Although it seems to wait until it strikes, luring me into a false sense of security and then crippling me.

I ran BlueScreenView, as I have seen many people mention it on various forums, including this one, and the such and it gave me these results. Sorry if this is not the accepted way of throwing out these results, but I am unsure what I am doing.

093012-22042-01.dmp
30/09/2012 13:57:08
DRIVER_IRQL_NOT_LESS_OR_EQUAL
0x000000d1
00000000`00000028
00000000`00000002
00000000`00000000
fffff880`019ad6fd
NETIO.SYS
NETIO.SYS+106fd
x64
ntoskrnl.exe+7f1c0 C:\Windows\Minidump\093012-22042-01.dmp
2 15
7601
280,808

I have put it on here in its entirety but I dont really know what this is either. Download Dump file.txt from Sendspace.com - send big files the easy way

Posted on Reddit as well, but I have yet to receive any help there. :( Laptop keeps BSOD-ing. Think it may be torrent related. : techsupport

Pretty brain dead computer wise, so sorry if this is unreadable/invokes facepalms all round.

Any advice or help would be very much appreciated as I have no idea what I am doing. If all else fails I suppose I can send it back.

Thanks in advance.

A:Lenovo G580 repeated BSOD-ing

Hello,

Take a look at the following link and perform the requested steps.

This will give us more information to help diagnose your issue.

http://www.techsupportforum.com/foru...ta-452654.html

4 more replies
Answer Match 63.84%

Hello every one today i was working normaly with my laptop g580 and the laptop turned off like when you unpluging the charger. I try to turn it with the charger/battery/both without any luck. No sign or light work . I make some solution like hard resset, pressing the button for 30s .... without any luck. Any sugesstion to fixing it even opening the laptop?

More replies
Answer Match 63.84%

Hey, I'm currently using a G580 Lenovo laptop.One day I played my laptop and supricely it just turned off, so I turned it on again and once I typed my password to access the PC it turned off again, so I got the battery out the PC and waited five minutes, after I got the battery back I pressed the power button and nothing happened, no lights, no noice, nothing, just not turning on. I tried to find my problem on the internet and I found a youtube video how to fix that: get your battery off with your charger, press the power button 1 minute, get back the charger into the pc and press the power button and ta-dam! It's working. Well no, I did everything and it didn't solve my problem. Any ideas?

More replies
Answer Match 63.84%

The error: Intel UNDI, PXE-2.1 (build 083)Copyright (C) 1997-2000 Intel Corporation For Atheros PCIE Ethernet Controller v2.1.0.9(08/12/11) Check cable connection..!PXE-M0F: Exiting Intel PXE ROM. Can anybody help me with this?

A:Lenovo G580 PXE-M0F: Exiting Intel PXE ROM.

Hi and welcome to the communityIf any removable disk such as flash pen drive is inserted, then please remove it. Then try the procedure below.If you are trying to boot from the hard disk, Then please press F12 at lenovo screen after pressing power on and select the hard disk as the temporary boot device. This is temporary. For permanent go to bios setup utility by pressing F2 or F1 and place hdd in the first place




Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

9 more replies
Answer Match 63.84%

I purchased a new lenovo G580 laptop last month(i5 -3210m and Windows 7 x64 home premium) and have had around 6-8 crashes.Havent installed any new software except Skype. The crashes initially mentioned only 'damageguardx64.sys' of Lenovo. However I am unable to find any fix for it. Can you pls help.

A:New Lenovo G580 BSOD error

Welcome aboard.

► First of all, uninstall McAfee. That's bad.

Code:
fffff880`09dbd268 fffff880`0106c97cUnable to load image \SystemRoot\system32\drivers\mfehidk.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
mfehidk+0x6c97c
It is McAfee Host Intrusion Detection Link Driver. Use Microsoft Security Essentials - Free Antivirus for Windows.

► A lot of Lenovo Bloatware are there, causing problems.
Damage Guard: Causing some damages here

Code:
BugCheck 19, {22, 0, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\DamageGuardX64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for DamageGuardX64.sys
*** ERROR: Module load completed but symbols could not be loaded for DamageGuardX64.sys
Probably caused by : DamageGuardX64.sys ( DamageGuardX64+32b4a )

Followup: MachineOwner
Lenovo EE Boot Optimizer driver now:

Code:
fffff880`09dbd888 fffff880`0183d30fUnable to load image \SystemRoot\system32\drivers\fbfmon.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for fbfmon.sys
*** ERROR: Module load completed but symbols could not be loaded for fbfmon.sys
fbfmon+0x330f
Get rid of all those things. Follow the guide: http://www.sevenforums.com/tutorials/219576-clean-up-factory-bloatware.html

► Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. I... Read more

1 more replies
Answer Match 63.84%

Hi  Please tell me the maximum Size supported by Lenovo  G580 20150?. Thanks .

More replies
Answer Match 63.84%

Hi, A small amount of water was spilt over the keyboard. It was promptly soaked up and computer worked fine for two hours. Some of the keys are no longer working (space, b, n and arrows). The computer is working fine and external keyboard is fine.Any ideas of how to get them working again? They have been removed and all looks dry. Thanks

More replies
Answer Match 63.84%

Hi I've lost my antivirus on my laptop, any suggestions on what should I do?

A:lost protection on my G580 Lenovo

What do you mean by "lost" exactly? Did your license expire?

10 more replies
Answer Match 63.42%

Hi all,is there a way to order new original sticker for Lenovo G580 (like this one on picture)?I have new, very good G580 laptop (model 20150) and I am very satisfied. I replaced the CPU and put the new i7 3610QM in it, 8GB of RAM and SSD. The only thing that tore and which bothers me is sticker. xDIf anyone from Lenovo can help me with this, I would be grateful.  

A:Lenovo G580 - where to order original sticker?

Hi Wind,
 
Welcome to Lenovo Forums.
 
It really feels something amazing when people are concerned about stickers more than issue. I can honestly say that i haven't tried it. However if you asked me to guess I would suggest you to contact the nearest service center for futher assistance.
 
Hope this helps. Let us know how you get on.
 
Regards,
Shashi Kumar
 
------------------------------------------------------------------------------------------------------------------------------------------------------
Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

2 more replies
Answer Match 63.42%

Hi All,
I am facing problem please help me out. Actually I forgot my Administrator password and I was using my system using Guest Account. But unfortunately today when I turn on my laptop to try recover the password, display turned into Blank and I hardly can see folders, Icon etc. I tried some with my own but does work thats why I need some expert advise. I have tried the following but didn't work

1. Reboot the system.
2. Opened in safe mode.
3. remove the battery and adapter after some time reboot. etc.

My laptop's configuration is given below :
Lenovo G580,Ci5 3RD/4GB/500GB/Windows 7 ultimate 64 bit.

Please let me know If you required any specific information.

Thanks in Advance
Shubh

A:Lenovo G580/i5/4GB blank screen on bootup

For password see option 4 or 5 - User Account - Reset Password in Windows 7

Can you be more specific about how it turned blank? A photograph will help tremendously. Screenshots and Files - Upload and Post in Seven Forums

5 more replies
Answer Match 63.42%

Hi Team, I just bought Lenovo G580 laptop on 26 April 2013. It worked for few days well, but yesternight it suddenly trip to white screen. I made on/off several times, in/out the batteries but the white screen remains same after turn on the laptop. When i turn it on the screen goes white and it reamins constant.... Anybody have idea what problem it relates too ? What to do ? Please help guyz ?












Solved!

Go to Solution.

A:Lenovo G580 screen goes white display

hi sameerjha28,
Welcome to Lenovo Forums!
 
?
You can try doing this:
-Turn off the computer.
-Unplug AC Adapter and remove the battery.
- Hold the Power button Down for at least 10-15 seconds, Then try reconnecting the AC adapter only and leave the battery out, turn it ON and see if it will make any difference.
- If it powered on Try it with the battery and check if it would still turn on properly.
?
If the above steps did not work Try an external monitor and check if it works there.
 
I would suggest Contact Lenovo Technical Support for service if the steps above did not help.
 
?
Hope this helps,




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Answer Match 63.42%

i have worked with this laptop for over two and half years without any difficulties but now for over 5 months, when it shuts down or restarts, it powers up the system with power lights on but shows black screen. when i try to open it, the hard disk is always hot but still nothing. when i remove the CMOS battery and put it back, it takes like 5 minutes and it displays. i dont i understand the sickness need your help thank you.

A:Lenovo G580 laptop powersup the system but does no...

You need a tech to assess it. Impossible to troubleshoot without doing tests and observing.Eg. Fan - starts up, continues after boot up runningPower adapter voltage etc or other power issues. Air flow and likely more.




T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Windows 7 Home Prem - 64bit w/8GBZ70-80 I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bit FHD 17.3 inch Display, Nvidia G840 w/2GB memory

4 more replies
Answer Match 63.42%

Just started happening this week.   It's stuck at the boot screen "lenovo".   I tried many different methods like removing battery, holding power button to reset, etc.  The *only* way to get it to boot is the remove memory card, and put it back.  Then it will boot up fine.     It might then boot fine for the rest of the day.  But then the next day (or after being shutdown for a while), it happens again so i have to remove memory card, put it back, etc.  What could be the problem here ?  I tried both memory slots.  So i don't think it's particular to one slot.  

More replies
Answer Match 63.42%

Hello. Can someone help me please. My lenovo G580 laptop is stuck on the lenovo splash screen and I do not know how to fix it.

More replies
Answer Match 63.42%

i have worked with this laptop for over two and half years without any difficulties but now for over 5 months, when it shuts down or restarts, it powers up the system with power lights on but shows black screen. when i try to open it, the hard disk is always hot but still nothing. when i remove the CMOS battery and put it back, it takes like 5 minutes and it displays. i dont i understand the sickness need your help thank you.

A:Lenovo G580 laptop powersup the system but does no...

You need a tech to assess it. Impossible to troubleshoot without doing tests and observing.Eg. Fan - starts up, continues after boot up runningPower adapter voltage etc or other power issues. Air flow and likely more.




T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Windows 7 Home Prem - 64bit w/8GBZ70-80 I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bit FHD 17.3 inch Display, Nvidia G840 w/2GB memory

1 more replies
Answer Match 63.42%

Model: 20157/2689Lenovo G580Windows 7 and Ubuntu 14No wifi card detected in device manager and intel proset gives error driver not installed.?

More replies
Answer Match 63.42%

Hi there all, Recently I got a Lenovo G580 (2189).Because I need WiDi (wireless display) options I bought a Intel Centrino Advanced-N6230 wireless card. After installing this hardware an error showed up at the startup: error 1802 ... unauthorized etc etc. I did not know about Lenovo - Bios and whitelisting hardware. Anyway this simple question remains. Which Intel Wirelesscard can I use with this laptop in order to work properly.Cause I don't want to hack the bios Cheers,Marlon

A:Lenovo G580 replacing wirelesscard not succesful -...

Hello and welcome,
 
I'm more familiar with ThinkPads, so please double-check anything you read in this post...
 
The problem with the white list is that a wireless card has to have a Lenovo FRU number.  It isn't sufficient to be an Intel XYZ board, it has to be an XYZ with the firmware ( the PCI subsystem ID) modified for Lenovo.  Reputable vendors will list the FRU if the board will play nice with the white list.
 
Take a look at the hardware maintenance manual for the G580, page 102l.  It lists an Intel 6150NX with an FRU # of 20002543.
 
Lenovo G480, G485, G580, G585, G780 Hardware Maintenance Manual (English)
 
As I said, this isn't my field of expertise (if there is one...) but maybe this will at least get you started.
 
Z.
 
 

9 more replies
Answer Match 63.42%

Hi all, I've run into an issue with my laptop  Lenovo G580 that has Windows 10 Enterprise 64. I am not able to read CDs and DVDs. When a DVD is inserted, "Choose what to do with removal devices" comes up. When I click that, the error message "E:\ is invalid drive" shows up. Please help. Thanks and regards,John

More replies
Answer Match 63%

bought this recently, and must say that i am pretty pissed. i did installation of windows 7 on it and it worked fine for some 10 days till it got BSOD cause of bad system info and couldnt even load into windows. only solution was to reinstall. i did fresh install and i got BSOD with fresh install after only few days. checked internet for solution and saw that you could select windows 7 os in bios for optimized settings that should prevent BSOD. but no option for windows 7 in bios. only for win 8 and other OS. i thought ok, i will just download latest bios and flash it. but what happened when i downloaded bios (a2cn38ww) from support page?i got this message "your machine does not match with this bios". so does anyone know where i can actually  download correct bios, or how to contact lenovo support so they can tell me where to download bios?

More replies
Answer Match 62.58%

Im not native english speaker, sry if u cant understand some parts. Ill try my best to make my message clear so eventual will come easier.

This problem occurs for quite some time, its rather calm since few weeks when I downloaded shitload of new drivers and some other lenovo stuff but might be just coincedence. Since this issue doesnt want to go away itself I have to do something about it. I can send it to Lenovo for free service anymore so Id like to ask some experts if theres something I can do to fix this issue.

Some info:
- occurs usually while typing or other stuff, but few times my laptop literally went nuts and flashed black screens few times a sec, no matter if i touched it or not

- its not overheating, i bought cooling pad and it didnt help much

- can happen just after turning laptop on and not happen during 10h+ session

Thank you in advance.

A:Screen randomly flashing black on Lenovo G580

Work through these Troubleshooting Steps for Windows 7 which will uncover most problems. Report back results as there may be other steps indicated.

Why did you install all of these other drivers? Did you already have performance problems or just create them?

Do you have a System Restore point still available before this problem began?

What else have you installed? Please post back as screenshot of Control Panel's Programs and Features after maximizing the page, using the Snipping Tool from Start Menu: Screenshots and Files - Upload and Post in Seven Forums - Windows 7 Forums

3 more replies
Answer Match 62.58%

I noticed that new drivers were released for G580. The drivers (Lenovo Enegry Management Driver) canot install because when the installer starts up, it immediatelly closes. Do I have an issue somewhere? Windows 10 (1511, Build 10568.17)Lenovo G580 (20157)

A:Lenovo G580 Windows 10 ACPI Driver not installing?

hi acemod13,
 
I looked at the Lenovo Energy Management driver for Windows 10 and upon observing the installer behavior, it extract the ACPI driver files (58KB) to C:\ProgramData\Lenovo\ACPIDriver (this may explain why the installer closes right after extracting).
 
If you're seing an Unknown Device in the Device Manager with an ACPI hardware ID (see image below) then try to update the driver manually and point it to the C:\ProgramData\Lenovo\ACPIDriver folder
 - Sample image
 
If you're unable to see the driver files, I've uploaded them here.
 
 
Let me know how it goes.
 
Regards

2 more replies
Answer Match 62.58%

Hello All,
 
My Lenovo Laptop, Lenovo G580 Model 2189, was upgraded from Windows 8.1 to Windows 10. Up until then I had been using Lenovo Solutions Center (LSC) and the Backup utility within it.
 
Now post the upgrade the Backup option has disappeared from the LSC. I am running LSC Version 2.8. 
 
I upgraded to LSC 3.x after reading somewhere that I should do this if I have upgradred to Windows 10. Then the only option I got was the periodic hardware scan for problems. So I downgraded again to LSC 2.8.
 
Will LSC Backup work under Windows 10 ?
Is there a Windows 10 version of LSC I can download that does have the backup option ?
 
Thanks All
John.
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
 

A:G580 - LSC Lenovo Solutions Center - Missing Backu...

Yes I have upgraded to LSC 3.3.002 and File Backup Utility has disappeared.

1 more replies
Answer Match 62.58%

hello
my problem is very confusing
every time i plug in a usb for android device it says it's not recognized by windows however the mobile or the tablet are charging via the USB but i cannot access the memory card
i tried installing intel USB driver , ADB driver but still no response
i use windows 8.1 last update was 3 days ago

A:android devices aren't recognized by my lenovo G580

Originally Posted by Zaref


hello
my problem is very confusing
every time i plug in a usb for android device it says it's not recognized by windows however the mobile or the tablet are charging via the USB but i cannot access the memory card
i tried installing intel USB driver , ADB driver but still no response
i use windows 8.1 last update was 3 days ago



Try Wondershare MobileGo free trial. After it installs the proper device drivers you should be good to go and under no obligation to buy.

[OFFICIAL] Wondershare MobileGo for Android: Android Manager

2 more replies
Answer Match 62.58%

I bought my Lenovo G580 more than 3 years ago, and it came with Windows 8.
For a certain reason, my coworker installed on it windows 7.
I tried to restore it to the original image by using the Novo OneKey Rescue button next to the power button... but unfortunately it didn't work... when i press the Novo button, four (4) choices appear on the screen:
- Normal Setup
- BIOS Setup
- Boot Menu
- System Recovery
When i press "System Recovery", windows 7 starts normally without recovering anything...
Is there any way to restore my Laptop to the original factory software???
Thank you in advance...
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 
 

























images.jpg ?12 KB

A:G580 - Lenovo OneKey Rescue button is not working ...

Your One Key Recovery (OKR) button is working, but most likely the recovery partition that contained the necessary files was removed or destroyed during the install of Windows 7.You have a couple of options:1. Contact Lenovo Support by phone, ask if the recovery DVD's are still available and purchase them, it is a reasonable price...2. Purchase the retail DVD of Windows (7, 8.1 or 10) and perform a fresh install.3. Pick a Linux version you like - download and burn to DVD, then install from media.I personally use Windows 10 Pro and Linux Mint (Dual Boot) on my G580 with no hardware issues in either OS... Really like some of the applications that Linux has, and the fact that it is completely free to use.Good luck.CB

3 more replies
Answer Match 62.58%

Hi,   I had upgraded my Lenovo G580 to windows 10. Everything working fine except dolby audio and touchpad scroll. Volume is too low when it is 100 and also touch pad scroll is not working. In previous version i have problem in wifi now it is working fine in windows 10. Kindly update the audio and touchpad drivers for windows 10 or give any suggestion to fix this problems.

A:Lenovo G580 windows 10 dolby driver and touch pad ...

Dear kathir26,
 
Thank You For Contacting Lenovo.
 
Kindly be informed that the Windows 10 Drivers For your machine model G580 arent released yet so you can follow up on our Website to find the driver needed once they are available.
 
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g580-no...
 
 



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 62.16%

Hi again, I've trying to update the bios using steps from instructions but I  receive the same error: :\Users\Marius\Desktop\d7cn30ww (1)\WIN\64bit>SET ERRORLEVEL=C:\Users\Marius\Desktop\d7cn30ww (1)\WIN\64bit>echo Delay 10sec...Delay 10sec...C:\Users\Marius\Desktop\d7cn30ww (1)\WIN\64bit>delay.exe 10000C:\Users\Marius\Desktop\d7cn30ww (1)\WIN\64bit>wRwECx64.exe 45 80===================================================================Compal Electronics, INC. 3.1.1.9Author : STD SID TEAM.Utility: [WinPE] wRwECx64.exeWARNING: THIS PROGRAM IS FOR INTERNAL USE ONLY.Copyright (C) 2015 Compal Electronics, INC. All rights reserved.===================================================================[DLLLB] ERROR : WTDMDRV : Unable to install driver!ERROR : Load driver fail.Error Code : 0x80000019, CplProject Initialize fail!Desktop\d7cn30ww (1)\WIN\64bit>IF "0" == "1" goto Tag2Desktop\d7cn30ww (1)\WIN\64bit>IF NOT "0" == "1" goto NG01Desktop\d7cn30ww (1)\WIN\64bit>echo 45 80 Fail 1>>log.txtDesktop\d7cn30ww (1)\WIN\64bit>goto TagDesktop\d7cn30ww (1)\WIN\64bit>echo Delay 10sec...Delay 10sec...Desktop\d7cn30ww (1)\WIN\64bit>delay.exe 10000Desktop\d7cn30ww (1)\WIN\64bit>wRwECx64.exe 45 80 How can it be fixed?

More replies
Answer Match 62.16%

Hi there!I recently bought a Lenovo B430 with a Celeron B830 inside and was thinking about upgrading to an Ivy Bridge CPU. My question is: do I have to do any BIOS update on it? My BIOS version is HOET36WW from 2012-08-20Thanks in advance and sorry for the bad english!

A:Lenovo B430 BIOS update

Hi Rodrigovhn,
 
Welcome to Lenovo Community Forums!
 
I?m sorry to inform that Lenovo B430 Laptop is only compatible with the Celeron processor range as Ivy Bridge new technology the Motherboard/System board will not be compatible with the normal working of the computer, this is the reason the BIOS update is only available for Celeron processors only.
 
Do post us back for further queries.
 
Best Regards

Shiva Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

3 more replies
Answer Match 62.16%

Hi all, Need help on my Lenovo G40-70 that I've just bought 6 months ago where I accidently bricked the laptop after BIOS update. It seems during the BIOS updating process it when well but after 2nd reboot there's some message on the screen that the BIOS failed to update factory setting and it freeze on the message for quiet sometimes. After a long wait I decided to long press Start button for hard reboot. Then the scary part comes in where it seems the laptop can't longer shows the Lenovo logo & cannot even boot to Windows, just black screen. Hope anyone can help me on this and give some advice on what I'm going to do. I would like to tried myself first before ending up with warranty claim since I'm worried I've brick the warranty due to wrong BIOS update procedure....











Solved!
Go to Solution.

A:Lenovo G40-70 Bricked by BIOS Update

hi mahdhir2005,
 
Im sorry to hear that.
 
  I would suggest you call the Lenovo Technical Team regarding the Issue. If it is the BIOS that's causing the issue then there maybe no source or option to have it fixed without they're help or service.
 
  If the BIOS software you downloaded was from a legit Lenovo Site and correct model, then I think It will be ok to Just report them what happened and ask for possible option.
 
Hope this helped
Thanks!
 
 




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Answer Match 62.16%

From the official site downloaded the updates for the BIOS version 2.04, and was 3.00, now downloaded version 3.00 when you install fixed it secure flash invalid firmware image error what to do ?

A:Lenovo G505 Bios update

Hi Tony,         
 
Welcome to Lenovo Forums.
 
We are really sorry to hear about the issue you are facing.
 
You can go to the bios and disable secure boot. Save and exit. Try to install the update again.
 
Hope this helps.
 
Regards,
Shashi Kumar
 
----------------------------------------------------------------------------------------------------------------
Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

5 more replies
Answer Match 62.16%

Hello everyone!I have really big issues with my Lenovo G505s laptop.(A8-4500M, 4GB ram, 7640G+8570M, windows 7 professional)I have around 20-25 FPS in every game when my charger is plugged in.When I plug it out, I get around 80-90 FPS boost.I did research in a lot of forum, and for some people helped that they updated the BIOS. I searched for BIOS update,I found it(v3.0), but for Windows 8 & 8.1.Is it compatible with Windows 7?Can I make any damage in my laptop if I install that? Please HELP!











Solved!
Go to Solution.

A:Lenovo G505s BIOS Update

the bios update will work fine i imagen 

8 more replies
Answer Match 62.16%

Does anyone know where I can download the BIOS for my lenovo K450 thinkcentre motherboard? Thanks in advance,Eric  

More replies
Answer Match 62.16%

My Lenovo g580 webcam is not opening as in device manager its showing yellow Exclamation on driver which says that: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)Please help as i had many things but its not helping.Do suggest.

More replies
Answer Match 62.16%

Hey All,
I have a LENOVO G580 2689 Laptop. It has:

Intel Core i3 2.40GHz (i3-3110M)
DDR3 (4GB)
No hard drive
Windows 8 sticker.
I would like to install a 1TG Hard drive. Which hard drive is compatiable with this laptop? Also it has a Windows 8 sticker underneath the laptop but the Windows 8 serial key is not present. Where can I find the licence key for this machine? Are they stored in the BIOS/motherboard?
 
Thank you in advance! :-)

A:Which hard drive to install on a LENOVO G580 2689 Laptop?

Try this for the HDD: http://www.amazon.com/Laptop-Hard-Drive-Lenovo-G580/dp/B00M4OGZQI. As for the windows 8 serial key, I don't know. My lenovo Y410p doesn't have the serial key on it, but I had no problems installing windows 8.1.

3 more replies
Answer Match 62.16%

I bought laptop 4 years before and it was good experience no maintannce cost or no issue till the date, but suddenly it stopped working. When I took the laptop to near by service centre they dismantled and tested the components and they are asked me to change a new mother board , really I could not understand what is the problem. How much will be costed , if I take my laptop to near by lenovo service centre ? May I know the maximum consuling charge , and I am just expecting everything should be fixed in front of me ?( place : India, chennai, sholinganallur ) 

More replies
Answer Match 61.74%

Hi all , I have a Lenovo V570 laptop. I had problems for some time now with the heating , in like 15 minutes it reached 85 C .
I decided to apply termo paste to the processor and the video card ! After doing this it still had a hight temperature . Then i tried tu update my bios seeing there is a new version, and then my laptop stoped working in the middle of this operation it just frooze up! The bios update has crashed (P.S the update was downloded from the official lenovo site ) . I restarted and the a black screen apeared and I can't do nothing. I hear the fan is running when i start the computer for like max 10 seconds. Also i hear the HDD and the DVD rom. I plugged in into the USB a telephone and it started charging it, the usb works. I tried to reset the bios but on this kind of motherboard there is no Pin to reset it. I tried to boot the bios from an USB flash but did not do nothing !
I pluged in an externam monitor but it is still black !

Please help me with this , what can I do ?
Is the motherboard dead becouse the bios updae failed ?
How can i test if the motherboard is dead to bee soure ?
 

A:Lenovo V570 bios update crash

I found this procedure on a lenovo forum. Give it a shot and see if it works for you. If not, it is not worth putting money into fixing this laptop.. New ones are pretty cheap and having a new mb installed in this one will cost more than a new laptop.

BTW the spelling errors are from the forum NOT mine.

Bios recovery procedure

How to Recover a bad or brick bios in lenovo laptops:

1.Download Phoenix Wincrisis then Click on the WINCRIS.exe and choose CREATE MINIDOS CRISIS DISK and press START to make: USB Flopy or usb flash memory.
When creating the boot Floppy or usb memory, select from Folder Options to view the hiden and system files and delete or rename the file config.sys if present.
2. Download your Bios file from lenovo.com if u dont have it, Rename your BIOS file to bios.wph and copy it to your: USB Floppy/usb memory.
3.Plug USB Floppy/usb memory into laptop and shotdown.
4. Hold down Fn+R keys and while holding press the power button.
5. Now you should hear the flopy drive working or usb blinking, hold the keys for a while.
6. Leave the computer for few min. and if the computer does not restart it self turn the power down.
7. if everything went OK the computer shold start normally.
Download Phoenix Wincrisis Links:
link to file
http://www.mediafire.com/?ztmilmmeymr
Note: This procedure is for Phoenix BIOS`es only and this metod works only for lenovo.
VERY IMPORTANT NOTICE ABOUTE RECOVERY LENOVO LAPTOPS: Do not take off your battery before flashing unlike the other... Read more

1 more replies
Answer Match 61.74%

I'm using lenovo g50-70 (20351) i have upgarded from windows8.1(preinstalled) to windows10, but however i didn't find the BIOS driver update for windows 10 in the lenovo support website there still didn't updated the bios driver for windows 10, so present there is driver for windows8.1 only, so when will we get the bios update for windows 10?










Solved!
Go to Solution.

A:LENOVO G50-70 (20351) BIOS update for WINDOWS 10 ?

KGKR1212 wrote:
I'm using lenovo g50-70 (20351) i have upgarded from windows8.1(preinstalled) to windows10, but however i didn't find the BIOS driver update for windows 10 in the lenovo support website there still didn't updated the bios driver for windows 10, so present there is driver for windows8.1 only, so when will we get the bios update for windows 10?

When I look up your system on the support page I see quite a few updates, drivers and such that support windows 8.1 and 10.  If you are looking for a BIOS update or patch, those are usually OS neutral and are applied with either a BIOS utility or patcher that works in DOS mode and some can use a windows based utility.
 
Are you trying to use a BIOS update to fix an issue or just get the "latest and greatest" for your computer?  Mostly I would not recommend updating your BIOS unless it is absolutely neccessary to fix a troublesome issue or problem with hardware.
 
CB

5 more replies
Answer Match 61.74%

Hi,I can't find an update file for my lenovo laptop, can someone give the latest update of my laptop bios?My laptop: Lenovo Y700-15ISKKind Regards.

More replies
Answer Match 61.74%

Hi! I updated my Lenovo T430u's BIOS from version 2.11 to 2.13 this morning and everything is slow since. I mean: sloooow. I had a functionnal dual boot Windows 10/Linux Mint but now Linux Mint takes around 3 minutes to boot. It took 25 seconds before. I figured it was related to the disk so I did the memory and disk diagnostics but everything seems ok. Even booting from USB/DVD is slow. I tried restoring default settings from BIOS, putting the battery in maintenance mode, removing the battery and even disconnecting the CMOS backup battery for an hour. I then tried to downgrade the BIOS but it does not seem like an option. This would probably fix my problem since everything was ok at version 2.11.I am really out of solution here! Please help, my computer is not usable in this state :/ Julien

A:Lenovo T430u BIOS update 2.13 slow

It looks a lot like this problem:https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/T500-takes-15-minutes-to-boot-after-bios... The only thing is that I don't have an "Intel AMT" option to disable in the BIOS :/ Help!

1 more replies
Answer Match 61.74%

First of all I want to say that I am extremely disappointed with the experience I had with my Lenovo. After I bought it I found out that Lenovo, for some reason, disabled the Turbo Boost option of the CPU. I tried to fix it by entering the BIOS but the options there were limited, so I decided to update the BIOS. I downloaded the BIOS update for 64-bit windows(i am running windows 8 which is compatible with the said update utillity). I ran the .exe and followed all the instructions (did not shut-down restart or anything my computer). After installing it automatically restarted and a Lenovo logo prompted on the screen followed by ">>Start PXE over IPv6, Press [ESC] to EXIT..." after that "EFI Network 0 for IPv6(numbers and letters) boot failed". Then ">>Start PXE over IPv4" which failed and a blue box poped saying "Default Boot Device Missing or Boot Failed. Insert Recovery Media and Hit any ket then select boot manager to choose a new boot device or to boot recovery media". Pressed ok and got me to Boot Manager screen. Boot option Menu had only EFI Network 0 for IPv6 and EFI Network 0 for IPv4". What should I do?Note that I tried to start up both with and without the ethernet cable in.

A:Lenovo G780 not working after BIOS update

You are the third victim here of this bios update...

9 more replies
Answer Match 61.74%

Finally gave into the Lenovo nagging and updated the BIOS on my E560 - big mistake. It went through and installed fine, no issues with failures, etc (well none that appeared on the screen). The laptop restarted fine, it went through and updated the BIOS, restarted one final time and ...... nothing. At present I have popped the battery and the power, reset the unit (press pwr button for 15sec etc), removed all peripherals, etc, etc, googled for similar happenings and so no matter what I have done, the laptop is as dead as a brick. I have the small red power light on but that's about it. Nothing appears on the screen (so can't see UEFI/BIOS), no fans start and about the only thing that does work is the DVD drive can be opened. It's a relatively new laptop (less than 12 months old so still under warranty) but as a word of caution to other E560 owners - DO NOT INSTALL THE LATEST BIOS UPDATE. Well no unless you want an expensive paper-weight for your desk.

More replies
Answer Match 61.74%

Finally gave into the Lenovo nagging and updated the BIOS on my E560 - big mistake. It went through and installed fine, no issues with failures, etc (well none that appeared on the screen). The laptop restarted fine, it went through and updated the BIOS, restarted one final time and ...... nothing. At present I have popped the battery and the power, reset the unit (press pwr button for 15sec etc), removed all peripherals, etc, etc, googled for similar happenings and so no matter what I have done, the laptop is as dead as a brick. I have the small red power light on but that's about it. Nothing appears on the screen (so can't see UEFI/BIOS), no fans start and about the only thing that does work is the DVD drive can be opened. It's a relatively new laptop (less than 12 months old so still under warranty) but as a word of caution to other E560 owners - DO NOT INSTALL THE LATEST BIOS UPDATE. Well no unless you want an expensive paper-weight for your desk.

More replies
Answer Match 61.74%

Hey guys, So I got two problema actually with my laptop. The first one is that after my bios update of may 10 2016 my laptop wont reboot anymore. No bios screen or anything, only the logo lights up and the fans stop working after few seconds. The reason for my update was because i bought a new Wifi card the wimax 6250 which is actually whitelisted, didnt work at the begin so I thought updating the bios would help. But now I screwed my laptop which im using for my study. Can someone pls help me with suggestions? Also removing the mobo battery didnt help, after its says that it has been reseted it boots again without anything happeninng.

More replies
Answer Match 60.9%

So I bought a new CPU for my old G580 laptop. I wanted to upgrade from the B960 it has right now (it's the 20150 model). The new CPU is a i5-3320M as it's listed as a compatible part on both the downloadable PDF and the PartsLookup website (I checked with my serial number as well). I changed the CPU, installed thermal paste, everything, but to no avail. Won't even enter BIOS. The "on" LED flashes for 10 seconds, then it shuts down. Installed the old CPU again - it boots without problems. New CPU again - no BIOS, nothing. I have updated my BIOS to the latest possible version (version 5ECN96WW (V9.01), as the newer version shows a "Error 255 - TDK Library Initialization Failed". I just don't know what to do anymore. Could be a faulty CPU, but I doubt it. The only difference is that the old CPU is Sandy Bridge, and the new is Ivy Bridge. But it's shown as "compatible" with the laptop everywhere. It's a shame really...

More replies
Answer Match 60.9%

HiAfter unsuccessful BIOS update I made a brick from my G780. Maybe notfully. SYmptoms are below. When I pressing power ON button I hear a fan, HDD and DVD and led frompower, battery lights on, and led from hdd blinks one time. After thatnumlock's led is on. On screen I see nothing. It is just black. Even indark room when I'm flashing directly on it still see nothing. In thisstate Laptop react for pressing capslock or numlock buttons andchanging their state ON/OFF. I tried to do emergency BIOS flashing by unplugging AC, holding Fn-Band then power button. FAN is spinning on highest speed, pendrive thatI used blinks one time and after about 10 seconds starting flashingwith led for 20 or more seconds. I seems like reading bios QIWG5.binfile, but after those 20 seconds nothing happens. I read that G780should make one short beep, and after a while should start beeping ininterval several times. Instead of this is only silence and after a fewminutes shutting down without success. Symptoms are still like insecond paragraph. I tried every USB port, with or without battery, original BIOS that wasbefore update, this new bios. Pendrive is formatted in FAT16.Any suggestions about what else can I do?Best regards, Peter*sorry for my English I didn't use it since school)

A:Lenovo G780 after BIOS update brick with black scr...

Try hooking up an external monitor and see if it works. If it still does not work contact Lenovo by phone to set up hardware service.CB

1 more replies
Answer Match 60.9%

bios update a2cn45ww lenovo g40-45 failed to install. after restarting, insydeh20 firmware update failed. os win 10 64bit uefi. thanks a lot

More replies
Answer Match 60.9%

Hi all,15 days ago I bought a lenovo W540 and during the upgrade bios and operation has failed ( Bios upgrade failure).after more than an hour, since the total system downtime, I removed the power to perform a reboot but nothing to do (black screen and beep beep ....).I contacted Lenovo Italy and they told me that ' update bios without their consent invalidate the warranty.This is Lenovo.......











Solved!
Go to Solution.

A:W540 Bios update failure and Lenovo warranty

Hi plorengo, welcome to the forums,
 
I would like to suggest that you contact support once more, and again request a fix under warranty, if on this occasion you also receive no satisfaction you should then simply state that you are not satisfied and wish to register a complaint, the CSR will be able to do this for you.
 
Please ensure that you note the name of the CSR you speak to and also request a call number, the call number will possibly be of help at a later date.
 
Please also see the following post from Mark_Lenovo;
 
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Bios-Update-Fail-Under-Warranty-but-No-Support...
 
Please give it another go yourself before contacting Mark and please let us know how you get on.
 

7 more replies
Answer Match 60.9%

Hi Lenovo Forum.I've bought this Notebook a month ago and I'm fairly satisfied with it.After I've done some tweaks such as removing the dust filter and downgrading the BIOS, the performance is great!But I ran into some problems after using it for a while now.I saw that there is a new BIOS update and I wanted to test it, but when I start the .exe it gives me: Runtime Error (at:1611):Out of String range. When I use CPU-Z to look up my Hardware, at BIOS it says Missing String or in the Lenovo Settings App BIOS: N/AI've read that others had this problem too, but no one has found a Solution. Does anybody know what I can do?

A:Lenovo Y700 15ACZ Bios Update Error

As its new you need to contact Tech Support so pickup the phone as what a warranty is for.




T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Win 10 64bitZ70-80 I7 - 5500U 16GB GB - 1TB HD Win 10 64bit FHD 17.3", G840 w/2GB

1 more replies
Answer Match 60.9%

hi.I 've downloaded bios update from this site and update but this update make problem for me .... my laptop Esc key not working anywhere. in game not working.. in bios setting not working .. in bot menu not working... please help for downgrade or new version of bios

More replies
Answer Match 60.9%

Hello, I recently bought a Lenovo z50-75. A few hours ago I wanted to update my bios. It was updating and suddenly the laptop restarted and there was just a black screen. I could hear the fans running, but the keyboard doesnt work because if I press Caps Lock the light won't turn on. I searched on google and there I found some solutions (with pressing keys, removing battery, etc.), but none seemed to work.I also found something about the CMOS battery. I opened my laptop but I couldn't seem to find it. What can I do now?  Best regards, Max

A:Lenovo Z50-75 bios update failed > black screen

Welcome to the Lenovo Community Max !
 
From viewing your model's Hardware Maintenance Manual there is a motherboard CMOS battery.  Unfortunately from the illustrations in the manual it would appear that the CMOS battery on the Z50-70 is soldered directly to the motherboard and can not be easily removed.  In that case try removing the main battery pack again and then press the power button for 60 seconds or longer.  Hopefully the CMOS battery will not be able to keep up with the power drain and will clear the CMOS.  Then reinstall the main battery pack and try powering it up. 
 
For your reference, here is a link to the Hardware Maintenance Manual......
 
https://download.lenovo.com/consumer/mobiles_pub/lenovo_g_z_50_series_hmm.pdf
 
If that doesn't resolve the problem then I recommend you contact Lenovo Support for additional warranty service.
 
Lenovo Support  -  Netherlands
 

Dutch 0900-654-654-0 or Email: (? 1 per gesprek)
9:00 - 18:00 Monday - Friday

2 more replies
Answer Match 60.9%

I'm here to request Lenovo to update the bios to enable the M.2 2242 42mm for SSDs? This is really bad since our office PCs have been upgraded from T450s but it seems we are downgrading as we cannot use our originally bought M.2 2242 for the old T450s. Can you please update the bios to enable this the 2242 for SSDs? We need more diskspace to do some graphics and photo make ups on the road. The single 2280 is not enough since when we got the machines, only 512GB was available.

A:T460s - Request Lenovo to update the bios to enabl...

I don't believe that the PCI-e circuitry is still present for the WWAN card slot on the T460s so it's not as simple as a BIOS change to enable the previous functionality which was present in the T450s. There is a 1TB option for the T460s which is the PM961 SSD which could be installed in place of your 512gb SSD, but that may not be an option in your case.

1 more replies
Answer Match 60.9%

Hello,I have flashed my laptop's BIOS with the tool from the support page, I can see that the new BIOS version is installed (0ZCN26WW), but the EC version is different (0ZEC25WW).I have even enabled the BIOS rollback feature so I could flash it twice as I've seen in a different post, but still no good luck. Is this a normal behaviour? Should let it be, or do I have to do anything else? Thanks,Alex

More replies
Answer Match 60.9%

Hi,  I would like to ask anyone here if you guys can help me with the Bios update 2014 5FCN95WW private/public installation.  Here's what I did: All was fine on my Z480 when I came from W7 Ultimate to W10. Then I notice after 3 months that some online games can't be played with W10 so I decided to go back to W7 Ultimate. So I did a clean installation of W7, My Bios version is 5FCN95WW 2012.. So I checked some updates on the web of Lenovo and found 2014 but with the same code of 5FCN95WW... I wonder why, so I download it and install, it restarted my pc and I thought all is okay, but when i checked the System Info it's still says 2012..  Now, my brightness adjustment using Fn+ up and down arrow keys is now having some issues. It wasn't there before.. Everytime I adjust the brightness, The Bar that shows on my screen is not calibrated or not accurate. It adjust by 4 rows each time i press it, so from high pressing the down button just once it drops to 4 bars and pressing it again shows no highlighted bars anymore but the brightness of my screen is still the same.  I uninstall Energy management and restart my pc and reinstall it again but still the same. My Fn+f4 and Fn+F1 are also not working anymore..  I tried to flash the Bios I downloaded from the web but I am getting an error saying "Error: 182 - BIOS Image is equal or older than ROM"..  I went on the bios settings to ENABLE the Bios Flash config... Read more

More replies
Answer Match 60.9%

A while ago I posted the possibility of upgrgrading my 6GB Lenovo V570 to 16GB.  It seemed as if it would be ok, although contrary to what Lenovo stated, but I chickened out.  Instead I've been living with my unit opearting very slowly and having the desktop manager and shockwave flash frequently fail.  It's not wonderful dealing with this and I have been looking for answers.  I thought about adding another couple of GB and along the way found suggestions on updating the drivers and bios.  Anyone savvy enough to advise on what drivers being updated would improve and how to accomplish this?  Also how is the bios updated wihtout screwing everything up?  I'm also thinking of doing a factory resore after backing up all the info on the unit.  Woudl a fresh start help or should I just  save my money and buy a new windows 10 computer?  Thanks!

More replies
Answer Match 60.9%

Hello there. I have a few questions regarding the recent release of BIOS update with version number CDCN37WW. Currently my BIOS is on version CDCN35WW. I was about to install it yesterday but did not because of several reasons. I read the instruction saying that I should put the BIOS settings at its default settings before installing the CDCN37WW update and there lies my problem. I bought the 15ISK version with 1TB HDD. A month ago I bought a 128GB SSD and did a clean install of Windows 10 on my new SSD. After booting into Windows 10 on my SSD in Legacy Mode, I format the partition in the 1TB HDD which houses my default installation of Windows 10 (the pre-installed Windows 10 by Lenovo). I did not completely wipe the HDD altogether and thus I still have the partitions created by Lenovo. The main issue that is stopping me from installing the update is my BIOS settiings. In BIOS boot submenu, I have it set to Legacy and then Legacy First so that it detects my SSD. UEFI does not detect my SSD. Default settings sets UEFI instead of Legacy. In conclusion, I cannot install the BIOS update even if I wanted to because I won't be able to boot into Windows 10 on my SSD once I change BIOS settings to default because UEFI (default settings is set to UEFI) does not detect my SSD. My questions are: -1. Does anyone have any solution or workaround to this problem ?2. Is it really compulsory to set the BIOS settings back default ? Or is it just a "... Read more

More replies
Answer Match 60.9%

Hello, Lenovo team Can you please, add to your next BIOS update for Lenovo Y50-70 a fix, that my laptop won't lose CPU speed after i return my laptop from sleep mode. Right now i'm using BIOS version (3.03) There is no other way to fix this issue, only you can do it with a BIOS update for that model of laptop. Thank you.

More replies
Answer Match 60.9%

Hello Guys. My name is Marius, and i have a question for you. I recently bought a Lenovo Thinkpad T440p online, and i noticed it has a supervisor password that i don't know, and neither the seller doesn't. My question is, can i update the Bios ( cause i have 2.24 version now ) without having this password? Or will it crash ? I need a 100% sure answer, as i don't want to brick my laptop. Thank you

More replies
Answer Match 60.06%

Laptop details:LENOVO Y700 Touch-15ISK Laptop (ideapad) 80NW000PUSOS: Windows 10 PRO 64 bitCurrent BIOS version: CDCN34WW Hi there (to Lenovo Support or anyone involved)I've encountered a problem with updating BIOS version CDCN35WW ?dated from 13?.?05?.?2016.My laptop is Y700 Touch-15ISK Laptop (ideapad) - Machine Type 80NW000PUSI followed instructions of installer, it did turned off my system 5 times as mentioned, and at the final, installer said that update was successful, but in real, there was an error flashing BIOS after a second reboot. Flashing bios rom just appeared on the screen mentioned flashing BIOS, but the system rebooted at once without waiting, so after this shutdown, laptop turned on and showed BIOS Error Message ("Invalid firmware image". Press any key to undo changes). After this it reboots system two more times , says that BIOS and AC succssfully updated, but when I check my BIOS, it has the same old version CDCN34WW. Before updating BIOS:1) I loaded optimezed BIOS defaults  - BIOS Update Failed with the same error "Invalid firmware image".2) Optimized defaults + I also tried to unplug all external devices, except AC cable -  BIOS Update Failed with the same error "Invalid firmware image".3) Optimized defaults + No external hardware (only AC) + downloaded BIOS update from Official Lenovo website to another PC and started from mine - BIOS Update Failed with the same error "Invalid fi... Read more

More replies
Answer Match 60.06%

Hey folks,

New user here. Just updated my laptop, a Lenovo ThinkPad Carbon, to 1.26/1.19 bioses, from the Lenovo website. After the BIOS updated, my PC rebooted and immediately BSODed with 0x0000009C (0x0000000000000006, 0xFFFFF880009EEB30, 0x00000000FE000000, 0x0000000000801136).

I am unable to do anything- system repair, safe mode, etc. I also do not have a CD drive on this machine so no OEM repair either! I am typing this from my phone.. Also got a new job where I need this baby and majorly worried now. If anyone can please help, I would be greatly appreciative.
Thanks in advance.

More replies
Answer Match 60.06%

Hi, I create this topic as it seems I need to update my bios (Y700 15isk). I have the same issues described in this topic:https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y50-70-Windows-regularly-freezes-when-1TB-SSHD-... Nothing new on this topic :https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/BIOS-UPDATE-FOR-LENOVO-Y700-Touch-15ISK-Laptop-... I have :- micro freeze while "windowsing" and gaming, HDD is spinning up and be heard- my Storage driver is up to date- version bios is actually CDCN27WW I find it hard to accept that my computer freezes around every 2 min and can not gaming with it. Hope the bios will fix it and I wonder how (is it even related to the HDD ?) When bios for Y700-15ISK will be avaible ? Ben

More replies