Tech Problem Aggregator

Lenovo Battery Firmware Update Utility 1.16 no dow...

Q: Lenovo Battery Firmware Update Utility 1.16 no dow...

The download page for this update is up since a few days but there is no download available: http://support.lenovo.com/fr/en/products/laptops-and-netbooks/thinkpad-edge-laptops/thinkpad-e555/do... And when you switch to another language like German or French the older version 1.14 is offered as downlaod. These bugs in your driver download section happen a lot, please fix them!

More replies
Answer Match 97.86%

After doing a Lenovo update for battery firmware, now my battery will not charge. I have to be plugged into direct current at all times.  

More replies
Answer Match 78.12%

First off, why is there no forum for server/network related topics? Anyway... Does anyone know where I can download the firmware and the update utility for HP VC FlexFabric 10Gb/24-Port Module. All documentation I can find, including documents sent to me by HP themselves in the last week, say I should go to http://www.hp.com/support/vcHowever that page no longer exists.Where should I be going now? Thanks in advance.

More replies
Answer Match 77.28%

When I press continue so the update restarts like it suppose to when it updates then after a few seconds later my computers gets missing file /grldr.mbr error and then a status 0XC0000098 then my computer reloads and ask me if I want to run m4 ssd and from the look of it it looks like the update went though. But that leaves me with the error and missing files or maybe corrupted files?

A:m4 SSD firmware update utility 0309 error 0XC0000098

I just read a bit about this because I bought an M4, with v0309. Latest is v000F.
Some people had problems. Google how to see what version you have from within Windows.
It's basically click on computer, right click the M4 drive, properties, hardware, select the M4 drive, properties, details, then select hardware id from the fropdown list. You'll see your version repeated 3 times there.
I decided not to update because I don't see benefits in the update. I'll look closer later.
People who had similar issue as you seemed to have a good update.
Look at the Crucial site for more details.

8 more replies
Answer Match 77.28%

Hello,
the new firmware update does not work.
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=PWD5K&fileId=3505631210&osCode=WT64A&productCode=xps-13-9350-laptop&languageCode=EN&categoryId=AP

I have a XPS 13 9350 with a QHD+ display and get the message
What is the reason ?

Best regards, 
espe

A:'Firmware update utility for DBC Disabled & Enabled' does not work

Hi , 
The update i think is only for Panel FHD , not for QHD or any other panel model .

1 more replies
Answer Match 76.02%

Hi,
I am trying to install this firmware to disable the automatic brightness but it keeps saying device is not supported.
www.dell.com/.../DriversDetails
My specs are:
Dell XPS 13 9350
OS: Windows 10 Home 64-bit
Processor: Intel(R) Core(TM) i7-6560U CPU @ 2.20GHz
Memory: 8 GB RAM
BIOS Version/Date: Dell Inc. 1.4.4, 14/06/2016

I would greatly appreciate if anyone could help me out!

More replies
Answer Match 73.92%

I have an E420 Thinkpad; NO problems ever with the laptop...a great machine.  I ran some updates and the Lenovo update wanted to update the battery firmware; there have never been any problems with my battery (I have an extended battery), but wanted to update as recommended. - When I ran the update, I got a "the tool was unable to update the battery firmware due to an internal error"...and then it automatically rebooted. - Once it rebooted, I now get a DOS warning (on initial boot) "this system does not support batteries that are not genuine Lenovo....." and I have to hit escape to continue.- When it boots up, I get a battery icon that shows either "plugged in and charging" with a RED X imbedded in the icon.- The laptop does not recognize the battery.  Even though it was in good condition and had a 95% charge when I first ran the firmware update....the laptop will not operate without hte power plug attached.- When I go to the power manager and the battery tab, I get a "battery was completely discharged and needs to be recharged verbiage- I have tried to re-run the firmware update from the update tool, but to no success. - I have tried to run the firmware update by downloading the install .exe file and running from my desktop....to no success.- I have tried to do a system restore, but it did not work.- I have screen shots of the screens mentioned as needed. Help!  I now have a small desktop that has a closeable lid.  It will not run if t... Read more

A:Battery Firmware update - failed and now will not ...

I have the same issue.Waiting for the software update or workaround

1 more replies
Answer Match 73.08%

I tried to install a battery  update on my Lenovo T520.  The update fails with an "internal error" message being reported.  The battery does not fully charge and now lasts only a few minutes once the charger is unplugged.  The battery is a Lenovo replacement less then a year old.

More replies
Answer Match 72.66%

Has anyone had any weird probelms when charging after doing new firmware update?
It went from 47% to 100% charged in .10 of a second, believe me im not complaining, just very weird.
Check out pictures and Log
 

A:Weird problems after doing firmware update for Lenovo laptops

Firmware for what component?
 

2 more replies
Answer Match 72.24%

Hi all,
 
After installing of Battery Firmware Update my brand new battery not recognized by notebook anymore.
It is completely dead.  I am fully upsert.
 
So, people, do not use this app if everything is fine. Application is not stable.
 
Facts:
Laptop: ThinkPad E420
BIOS: 8HET44WW(1.26) - Latest
Operating System: Windows 10.
Power Management Driver: 1.67.11.8 -Latest
Battery Firmware Update Utility: 1.15 -Latest
Battery Model: FRU 42T4799  - (9cell, 55++, T410,  E520, E420, T510...) - Original, Fully compatible. 
 
Proofs:
Screen1: http://imageshack.com/a/img923/8763/cBax7G.png
Screen2: http://imageshack.com/a/img923/165/9Rg71E.png
 
 
Seems like internal battery memory was corrupted due to flashing interruption.
I assumed the root cause is internal software error.
 
I've tried the same on Windows 7/8/XP with all LnvBFU revisions (from v1.2 till v1.15) without any success.
 
But LnvBFU.exe still recognizes the battery, it still able to start flashing.  
And I still have hope to install battery software correctly.
 
Dear Lenovo experts:
1. Please provide steps to correct this error.
2. Please advise how can I get logs of LnvBFU to figure out what's wrong.
3. Please fix this issue in the next LnvBFU revision.
 
Thanks in advance.
 
 
Moderator comment: Please don't post the same message(s) in multiple places as it splinters the discussion. Duplicate(s) removed.

A:Battery Firmware Update has killed Brand New E420 ...

Hi, I have a comparable problem over here. Got a brand new Lenovo Yoga 260 three weeks ago, worked completely fine until last wednesday. Processed some lenovo updates including Lenovo Solution Centre and Power Management and now my battery is dead. Everytime i turn on my Yoga 260 i get a battery error message after a few minutes that says the battery is not charging and it should be replaced due to a bad condition. When i open up Lenovo Settings and search for energymanagement it displays the same message telling me the battery is defect due to normal wear and it should be replaced. My problem is that the battery worked completely fine until the moment i installed some Lenovo software updates. I hope lenovo support can provide steps to correct this error instead of forcing me to return it and wait 2 -3 weeks. Thanks in advance. 

1 more replies
Answer Match 61.74%

Ok noooby question.

How do i get into recovery console? lol

Im having a similar problem.

Thanks
 

A:Anyone know a good HDD firmware flashing utility?

Mikirus said:

Ok noooby question.

How do i get into recovery console? lol

Im having a similar problem.

ThanksClick to expand...

It is better to start your own thread rather than replying to another with question. To get into the RC, boot with your win2k or xp cd. At the first menu choose repair not install. You are now in the RC. You need the admin password for the system you are trying to repair. If there is no os loaded, you will not need the admin password.
 

2 more replies
Answer Match 61.74%

I have a Maxtor drive slightly out of warrantee. The drive bios got corrupted somehow-reprogrammed by a RAID card. It is a 30 gig ata133 drive but the bios on it is now for a 40 gig drive, I suppose from the memory of a previous drive that was used on the card. I have some other identical 30 gig drives; I would like to reflash the bios of the faulty 30 gig drive back to normal so it will start working again. I could copy the bios from one of the other drives and reflash the corrupted drive if I had a utility to do so. I did not see any bioses on Maxtor. Does anyone know of such a utility?
 

A:Anyone know a good HDD firmware flashing utility?

16 more replies
Answer Match 61.32%

Hello, I lost to prgrams from my IdeaPad Y5070. Lenovo Energy Manger & Lenovo Utility/Settings. Could you please give me the link to download them ? Thanks.Khalid Mostafa  ???

More replies
Answer Match 60.48%

Since I upgraded to XP Home Edition I always have running a box that reads "The firmware of the card is not suitable or too old for running on your environment. The utility is going to update the firmware of your card." If you hit OK up comes this error message "Error - This image will not work on the selected card. Current platform is 801b. Current card is platform 801b. Image built for : 800a,800b, 8012, 8016, 801a.

I have a lynksys Instant Wireless Network PC card WPC11 V 3.0

Every thing works but the pop up is annoying
 

More replies
Answer Match 60.48%

Since I upgraded to XP Home Edition I always have running a box that reads "The firmware of the card is not suitable or too old for running on your environment. The utility is going to update the firmware of your card." If you hit OK up comes this error message "Error - This image will not work on the selected card. Current platform is 801b. Current card is platform 801b. Image built for : 800a,800b, 8012, 8016, 801a.

I have a lynksys Instant Wireless Network PC card WPC11 V 3.0

Every thing works but the pop up is annoying.
 

A:Firmware Upgrade Utility Wireless PC Card WPC11 v3

Closing duplicate, please reply here:

http://forums.techguy.org/showthread.php?t=301044
 

1 more replies
Answer Match 60.06%

I was prompted to update my Battery firmware I have a genuine battery in my Thinkpad edge E520 that is out of warrenty The firmware failed and disabled the battery so it is no longer operating How do i reverse this firmware or disable the battery bios check?

A:Battery firmware has just killed my battery. How d...

Hi, welcome to the forums.
 
Here it is the support site link for your model just in case.
 
I'm guessing that the computer is booting but the battery does not provide any charge, right?
 
I did not have that issue, but I'm just guessing, What will happen if you apply the battery firmware update again? You can download it manually from the support site: "Lenovo Battery Firmware Update Utility for Windows 10 (32-bit, 64-bit), 8.1 (32-bit, 64-bit), 8 (32-..."
 
This is what it cames to my mind right now, I hope it helps.
 
Regards

2 more replies
Answer Match 60.06%

Hello,
 
I lost to prgrams from my IdeaPad Y5070. 
Lenovo Energy Manger & Lenovo Utility/Settings.
 
Could you please give me the link to download them ?
 
Thanks.
Khalid Mostafa
 
 ?
 
?
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

A:Y50-70 - Lenovo Energy Manger & Lenovo Utility/Set...

Oh wow, I haven't seen those before, What operating system were you running with that? Its certainly different with Windows 10




T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Windows 7 Home Prem - 64bit w/8GBZ70-80 I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bit FHD 17.3 inch Display, Nvidia G840 w/2GB memory

5 more replies
Answer Match 57.12%

Battery Issue - Lenovo V570 (Laptop) - Battery Model L09S6Y02

First off I for the most part do not use the battery. It is normally detached from the laptop. I only attach it to periodically charge it and test prior existing charges' performance.

O.K. here is the problem. I attach battery attachment, computer does not make it to the window screen more often than not. When it does, it freezes at the please wait loading screen.

I rarely use the battery at all, but I want all my equipment up and functional. It's life should still be good for I periodically recharge it. I think since I've had the laptop I've only recharged it a total of 6 or 7 times and that's been a year or so.
 

A:Battery Issue - Lenovo V570 (Laptop) - Battery Model L09S6Y02

jonasdatum said:


Battery Issue - Lenovo V570 (Laptop) - Battery Model L09S6Y02

O.K. here is the problem. I attach battery attachment, computer does not make it to the window screen more often than not. When it does, it freezes at the please wait loading screen.

I rarely use the battery at all, but I want all my equipment up and functional. It's life should still be good for I periodically recharge it. I think since I've had the laptop I've only recharged it a total of 6 or 7 times and that's been a year or so.Click to expand...

I, for the moment at least have the battery working power adapter attached. What did I do? I uninstalled Avast (freeware version) ?

I learned from prior experience that running two of any system utility software can cause problems, but it normally restricts itself to what it is protecting. Then I remembered: "If you remove the possible whatever is left however in probable must be the truth."

Next phase of testing is test the battery on it's own.
 

2 more replies
Answer Match 56.7%

HelloIn a couple of weeks I want to install fedora 24 on my Lenovo y50-70, but I don't want to have problems again with secureboot. The problem I had when I installed fedora 23 (or any other Linux) is that I can't put off secureboot, every time I disable secureboot in BIOS it automatically sets it back to enable (I save of course) so I installed fedora 23 with secureboot, the problems were slow start-ups and a lot of problems with virtualization (the problem is secureboot, I have enabled virtualization in BIOS). I know now how to fix virtualization with secureboot, so that's not my question.My question is could I flash the firmware to something different where secureboot is off or not there? Or anyone has a solution how I can put off secureboot completely?A second question is do I lose performance when I don't install my OS in UEFI? So in BIOS mode. I have read some articles some say not, some say it depends.Thank you for reading my postGreetingsGraham  

More replies
Answer Match 56.7%

I am having a message that says "Genuine Lenovo Battery Not Attached" message that appears after Windows 8.1 starts up. A similar sort of message appears before even Windows boots up, and I need to press the 'Esc' key in order for Windows to boot. This seems to have happened after a recent Windows update. I have uninstalled an reinstalled the Lenovo Power Management Driver but it does not appear to have fixed the issue. My BIOS is the latest version. This issue is on my Lenovo ThinkPad Yoga S1. Any assistance is appreciated.











Solved!
Go to Solution.

A:Genuine Lenovo Battery Not Attached, Lenovo ThinkP...

Hi,
 
Welcome to Lenovo Community Forums!
 
I?m sorry to hear that your Lenovo ThinkPad Yoga is displaying a message stating ?Genuine Lenovo Battery Not Attached?.
 
I would suggest you to perform Flee Power ? remove the battery and any other peripheral device connected to the computer. Hold the power button for 10-15 seconds and then connect the battery and AC adapter to turn ON the computer.
Get into BIOS and load defaults, save and exit.
 
Open Device Manager and under Battery Look for Microsoft ACPI Compliant Control method Battery, right Click on it and uninstall it, Restart after uninstallation.
 
Please let me know the happenings!
 
Best regards,
Mithun.




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 56.7%

I recently purchased an x230 and everything is perfect but the battery fit.  It moves up and down slightly.  I know there are many posts in the lenovo forums for all different models that the battery fits lose in "x" model and solutions of putting paper / foam / tape to make the battery fit tighter.   What I'm wondering is if anyone has actually had the problem fixed by lenovo.  I've read a few posts where a user has had the base piece of the case replaced (where the battery fit's into) and that has solved the problem.  I'm still within my return period on my x230 and am awaiting a call back from tech support to see if there is anything they will do but I don't think I will keep it if they can't fix it.   I'm just curious has anyone actually had luck by replacing the base piece.  From what i've read a replacement battery hasn't worked for anyone.  Also, I know everyone says its by design for thermal purposes but I haven't actually seen any official confirmation of this from lenovo.   Thanks.  

A:Battery Loose / Battery wiggle in x230 and LENOVO ...

As a follow up, I'm just curious if this is a widespread issue?  Anyone have loose battery in their x230 / x220?  I'm not talking about it falling out...but just a few millimeters of wiggle room.  Basically when i pick mine up or place it down, I can feel / hear the battery move.  I'm just trying to get an idea if this is a real problem or thats just how every thinkpad is.  I called support and they are sending someone to replace the base panel and we'll see if that fixes it.  I'll update this post when it get's replaced.   Edit* I also asked the lenovo support rep if they had heard of this issue and they said no, never.  I don't see how this is possible as if you do a google search for thinkpad loose battery there are many results.  

9 more replies
Answer Match 56.28%

Could you put available firmware images on support.lenovo.com Download page for Beacon Storage product.So that I could be used to recover/upgrade it from USB Flash disk. As decribed at "Recovery and Firmware Tools" section of following manual http://download.lenovo.com/lts/RSPW1000/CourseFiles/player.html 










Solved!
Go to Solution.

A:Lenovo Beacon firmware recovery image

Hey, does anyone has a workng link or firmware?  edit:found it here is correct pasted onehttp://download.lenovo.com/lts/RSPW1000/CourseFiles/player.html

9 more replies
Answer Match 55.86%

I have an Ideapad Z510. I have been facing the same issues with the battery that are listed in the new battery firmware upgrade. However, when i try installing the upgrade, it shows me that there's no such battery which needs an upgrade. What do I do? Also, I tried the battery calibration in OKO. Nothing happened for 12 hours. No battery discharge, no nothing.Looking for a solution.....please help!

More replies
Answer Match 55.44%

Hello, In august I bought new Lenovo B50-80 notebook. One month ago, I was checking HWmonitor and I saw that the battery wear level is 11%. PowerShell battery test in Windows 10 says the same ? at one of a charge battery wear. Which I think 11% is to much. I use my notebook as a secondary PC. In two months of usage, I charged max 15 times (and before always depleted to 15%).I tried RMA the battery, but I did not have any success. They say that the battery is OK, if notebook does not automatically shut down.I would like to know if this is normal wear for battery and the answer from RMA guys.If it is not, how can I contact directly Lenovo?Please advise.Best regards.B.

More replies
Answer Match 55.44%

Hopefully I get a solution to this question but my Lenovo Y50 has not been charging even after I thought it was my laptop charger was broken I bought a new one of the same exact type and It still didn't work and did the exact same thing as it did with my old charger. (i had this laptop for a year) What did the laptop exactly do? Well my laptop when I plugged it in it didn't work unless I set it up in a certain way to where I wiggled the charger tip around untill it finally said It was charging and I had to hold it into that position like a statue or else it would unplug if it moved an inch. That's not even the worst part! My chargers also heat at the tip. By heat I mean it literally gets so hot I burn myself on touching the plastic part and the metal part was very hot, when this happened on my new charger I made sure to unplug it right away to avoid doing any damage to it. Solutions I have already tried:Went into my control panel -> device manager -> Uninstalled both of the battery things like the ac adapter and the other thing I don't remember what it was called -> reinstalled -> Worked for a bit but not 100% gauranteed and after a while it didn't work Can't do a battery gauge reset because charger always unplugs Already tried BIOS does nothing. Don't even tell me to restart my laptop lol. Summary:Y50 won't charge, Have to have charger at certain angle to chargeTip over heatsdid everything in device manager to fix itno driver up... Read more

A:Lenovo Y50 Battery port, Or battery itself proble...

Hi Seal,
 
Welcome to Lenovo Forums.
 
Kindly perform Power Drain and set BIOS default:
Try turning off and removing the battery first. With adapter charger unplug, press Power button for 15seconds to drain power inside.  Plug in adapter charger and press Novo button instead of the power key to turn it on for the Novo Menu  Choose BIOS setting  On Exit tab , load optimal default then Y then place battery back before save changes and exit.
Check if charging.
 
Let us know how you get on.
Regards,
Shashi
 
Tap that Kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

3 more replies
Answer Match 55.44%

Hi All, I foolishly ran the Lenovo software update tool and one of the updates that installed was battery firmware v1.13. The update failed part way through and ever since my battery is having an existential crisis - I know it's plugged in and 100% charged but it reads 0% (or sometimes a red X) and the machine shuts down when AC power is removed. Being out of warranty the phone line people just keep trying to sell me a new battery and have no ideas on how to fix the existing one. I've tried the firmware update multiple times but with no joy. Also tried sourcing previous versions of the firmware which doesn't work. My battery was not one of those listed for recall. Latest and best suggestion was that it may be a motherboard issue and I could confirm by plugging in a different battery to see if it works - with absolutely no suggestion who would let me borrow their battery and plug it into my possibly killer machine. Has anyone else had a similar problem and found a fix? Is anyone based in Perth, Western Australia and want to let me experiment with their battery? {you crazy fool!} Does anyone know how to contact an actual Lenovo person rather than the useless call centre (1800 041 267 from Australia, seemingly connecting to Malaysia or Thailand judging by the accents)? Consumer law in Australia would suggest these guys owe me a new battery regardless of warranty status but I don't know how I can force the issue if I can't even speak to them???&... Read more

A:Thinkpad Edge E420 Battery dead after firmware upd...

This happened to me today. The solution is to restart the computer and enter the BIOS.  Then use the arrow keys to move to the config tab, then down to the power option, hit enter, scroll down to the disable built-in battery, hit enter, then follow dirctions on the right.  You will unplug the power cord to shut down the computer and when you plug it back in and turn it back on the battery will be recognized.  if not , try the process again as it took me two tries.  hope this helps.

4 more replies
Answer Match 54.18%

Hi, I have a few basic questions.1) What does the Lenovo Utility for Windows 10 do?2) I see that there is a new version of this utility, version 3.0.0.4 of 25 Dec. 2015, but    there is no information about what the new version does and what is different from    previous versions.3) Why do all the Lenovo drivers and utiltities have so little basic information of their    purpose or usefulness and why do none of them have any version history? I find that the lack of openness and transparency makes the life of then end-uservery hard and difficult. Is there any hope that Lenovo will change this policy. Best reagrds,Frode

A:Lenovo Utility for Windows 10

Few of the files have a readme to know what their purpose is. Some are obvious but still details on purpose and changes should be made clear.




T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Win 10 64bitZ70-80 I7 - 5500U 16GB GB - 1TB HD Win 10 64bit FHD 17.3", G840 w/2GB

4 more replies
Answer Match 54.18%

After windows' anniversary update  my pc didn't work good so i had to make a clean install. After i made a clean install i couldn't install lenovo utility. I tried different versions of it still can't use it. Is there anything else i can do ? 

More replies
Answer Match 54.18%

I downloaded the Lenovo Utility from the Yoga 910 drivers page, but it doesn't do anything after install. I've navigated to the Program Files/Lenovo/Lenovo Utility folder and clicked on LenovoUtility.exe but nothing happens. I was under the impression this app controlled the hotkeys. What am I missing? Also, is there an app that I can install that will keep the Lenovo drivers updated?

More replies
Answer Match 53.76%

Can a Firmware Update and/or drivers on printers be reversed?I am new to BleepingComputer, so I do not know which Forum to post this to, as this issue involves multiple forums: Hardware (HP Printers), Software (Firmware & Drivers), Operating Systems running Windows 2000 and Windows XP.At my workplace, we have many HP Printers on the network. HP sent me a link promoting HP Easy Printer Care. I figured I would try it (big mistake) because I take care of all of the printers in our building. So this Easy Printer Care tells me that there is updated Firmware for my printers. So I get the firmware and install it. Of course, HP didn?t really explain how to install it. I had to look it up to actually do the install. After installing it, HP tells me that the Firmware Updates still need to be updated!?!Now the end users are having problems when they print. Multiple users are having the same and or different problems. The problem that has the most reports to me are: When someone is printing a document and they want to change it from portrait to landscape, they click on properties and receive an error message that reads:Function address 0x2e2a5aa caused a protection fault. (exception code 0xc0000005) Some or all property page(s) may not be displayed. Click OK.Then another windows pops up saying: Operation could not be completed. Click OK.The function address is always different (for different users or systems) The exception code is always the same. The User c... Read more

A:Can A Printer Firmware Update And/or Driver Update Be Reversed?

You can go to Device Manager and find the printer and in properties it gives you the option to "roll back" the driver to a previous version. A firmware update and driver update mean 2 different things, to me anyways. My understanding is a firmware update offers "improved" instructions to the onboard chip of the device. What does HP say about the problem?
Mark
'

3 more replies
Answer Match 53.34%

To make a long story short my Model 700-151SK had to have Win 10 reloaded. When Win 10 was reloaded I lost all the Lenovo Utility s/w that shows s/n, warranty into., checks h/w and enables you to max. out battery charge at 60% when plugged in to improve battery life. I have tried to find this s/w on Lenovo.com but all I can find is Advanced Configuration and Power Masnagement Interface (wwet020e.exe) and Lenovo Utility for Windows (wwlb090e.exe). I have installed these but can't see how to use them. How can I obtain the Lenovo s/w that originally came with my Ideapad 700?

More replies
Answer Match 53.34%

Hi all, I have the lenovo y510p SLI 750m version and recently (2-3 days ago) my cpu fan on the left side of the laptop stopped working with the dust removal tool. I removed the lid and I can see both fans spinning just fine, however only the right one actually performs the dust removal when prompted. The other one stays queit and I don't feel any air pushed out of the left side. I can feel it on the right like normal though. Any ideas on how to fix this? 

A:Lenovo y510p Dust Utility

Hi sifuraga , 
 
Greetings. 
 
You can initially power drain the system , turning it off removing the ac adapter and battery then pressing down the power button for 12 seconds . Start the machine using the Novo button (page 82) to launch the Novo menu for BIOS set up and set BIOS defaults f9 save and exit F10. Check the BIOS version.
 
Check how it goes else proceed with uninstalling and fresh installing the Lenovo power mangement tool . Restart and recheck . 
 
Update us how things go. 
 
Regards

1 more replies
Answer Match 52.92%

Just curious if one exists. I'm buying a new battery and want to test it out.
 

A:Utility to test Laptop Battery Life?

Hi Akito!

I am not sure with these, BUT if you mean software utility...

What! The coolest Laptop Battery Monitor
http://homepages.ihug.co.nz/~ashok/akwhat.html

WHAT! displays the amount of battery life in minutes and as a percentage. Also displayed is the current time and icons of a battery (showing charge level) and a power plug if the battery is being charged. Visual clues are provided if the battery is low - characters change colour and the battery icon has a cross on it. Right-click will present a menu allowing you to turn on Clock Chiming, Laptop Suspend and lots of other functions.

SlimBatteryMonitor: free battery monitoring utility
http://macnn.com/rd.php?id=16220
is a free replacement power gauge that monitors both laptop batteries and many UPS batteries

BatteryTest
http://www.sonic.net/~ezzell/BatteryTest/Battery_Test_Download.html
The BatteryTest program is most useful with modern laptops which incorporate ‘smart’ batteries – i.e., batteries which are capable of fully reporting their state of charge.
 

1 more replies
Answer Match 52.08%

Hello everybody.

I face a really strange issue. The eco utility used to work ok with win 10 on my satellite S50-B-12Z and i was using the eco charging for the battery as I mainly run my laptop plugged.

At some point, I need to do a system restore. I re-installed the win 10 and also the latest version of the eco utility, downloaded from the Toshiba site. The problem is that when I open the eco utility, the "battery lifecycle" choice, where you could select the eco charging or not, does not appear anymore! So I am left with the battery on 80% plugged but not charging.

I have already tried to uninstall and install the utility again, or install a previous version of it.

Is there anything I could do in order the "battery lifecycle" choice to re-appear or to cancel the eco charge state and let my battery charge 100% again?

Thank you

A:Satellite S50-B-12Z: Battery lifecycle option doesn't appear in Eco Utility

I have the same problem with my Satelitte P50-A. Battery-Lifecycle doesn't appear in the new installed Win 10 eco utility. Version is: 3.0.0.0006. Older versions don't work, i've tried that too.

Still only 80% maximum charge, no 100% .

I hope anyone has a suggestion. Battery Life with 80% is too short

1 more replies
Answer Match 51.66%

So i upgraded to an ssd today and did a clean install of windows 10 with the intent of downloading drivers from the site. But i cannot get the utility software to work, it had some nice functions that i really liked. I have tried installing it and reinstalling it and double checked if it's the right one. I tried running the .exe from the directory and task manager says it's running but there is no task tray icon or any way of interacting with it? Please help

More replies
Answer Match 51.66%

I have a strange issue. I have a Lenovo T60 laptop and I am experiencing problems with the power management/power guage.

It will often show the battery not installed (power gauge is a greyish-white color with dashed lines) or it shows a red X. It does not matter if I am on AC power or on Battery power, it will show the full range of power, battery level, not installed, or an error.

I have searched Lenovo's site and I seem to remember seeing an FAQ about this, but now that I need it, I cannot find it.

What can I check or do to stop this? While it is annoying, I am not sure if I am having a battery problem or not. I did check my battery on Lenovo's site to see if it was recalled and it is not.

I do appreciate any help that any one can give me.

Thanks!
 

More replies
Answer Match 51.66%

My ladyfriend is having battery problems with her HP ze4610 laptop running XP Home.
She keeps it plugged into the A/C wall outlet about 99% of the time, so shouldn't her battery be charged all the way when she uses it the other short 1% times that it is unplugged and running on battery? The computer is not that old, a year, maybe.

She said the other night while unplugged and doing some important work on it for a few short hours(2 or 3, maybe), a pop-up message came up saying it was shutting down from lack of power and to save her data, or it would be lost(which she LUCKILY was able to do before it shut down very quickly).

My question is....is there an utility on her HP that can tell her how well her on-board charger is functioning while the laptop is plugged in? (It must not be charging too well, and we'd like to know how well)
And tell her how much the battery is charged at times it is unplugged?

thanks,
jA
(I'm a real dummy about laptops)
 

A:Is there a utility on HP laptops to monitor battery charging and power level?

6 more replies
Answer Match 51.24%

Windows Update is not telling me I need or can update my Wireless networking, but Intel's Update Driver Utility says I should and is offering the update. How would you recommend I proceed?

A:Should I trust Intel's Driver Update utility or Windows Update?

G'day Rolo,

The difference between the two drivers is that the Windows one is digital signed/tested by Microsoft. I would say that unless the Intel one delivers more benefit than the Windows one, and everything works as expected, then there is no need to update.

You often see this with graphics card drivers too, for example.

Regards,
Golden

9 more replies
Answer Match 51.24%

Dear Users,
Netgear WGR614 v7
Please advise on why I can't update the firmware. Every time I get the message that the upgrade has failed.

Arturo
 

A:Firmware update

13 more replies
Answer Match 51.24%

Hello, I have recently purchased an "Onyx Portable Media Player" by "Mach Speed Technologies". I installed the included drivers and software and am currently upgrading the firmware. The update window says "SigmaTel MSCN Firmware", so I'm assuming it's licensed by SigmaTel. It's updating from version 000.000.000 to 880.282.433. The window's progress bar seems to be stuck at "Initializing", with no advances made in the main progress bar but the smaller one constantly filling and then refilling. Is this just going to take a long time or is there something wrong?

I can provide a screenshot if needed.
 

A:Firmware update

Is this the media player firmware or motherboard?
Why did you feel the need to upgrade the firmware?
 

3 more replies
Answer Match 51.24%

Could someone please tell me the manufacturing web site for MATSHITA CD-ROM CR-586 and OPTORITE CD-RW CW4802 so that I could do a firmware update??????????????????????????????????????????
 

A:Firmware Update

16 more replies
Answer Match 51.24%

I periodically check the website for my router to see if there are any new firmware updates. I checked it today and every time i try it says :
A New Version is Found. Do You Want to Upgrade to the New Version Now?

Firmware Version:
Current VersionV1.2.0.8 New VersionV1.2.3.7

I click Yes.
It then tells me that the update failed.
Any suggestions?

I am running an XP machine.
I have Verizon DSL.
I have a Westell model 2200 modem and a netgear wnr2000 router.

Any other information you need i will try my best to provide. Just ask.
Thanks
 

A:Can't Update Firmware

9 more replies
Answer Match 51.24%

I have installed Open Wrt Bin file on my WR703N Mini portable wifi device. After that it doesn't broadcast WiFi Signals. But Through the LAN cable and using ftp i can connect the Flash memory. Please anyone can help me to Update to my Old Firmware version using FTP. I have my old firmware version's bin file. Pls help to me.
 

More replies
Answer Match 51.24%

Hey guys I have a Samsung SH-S222L. Should I upgrade the firmware to SB02?
 

A:Should I update the firmware?

Are you having a problem the firmware upgrade corrects? If not, leave it alone.
 

2 more replies
Answer Match 51.24%

ok ive checked a bunch of sites and i wanna get my routers firmware to 3.43 so that it'll be primed for halo 3 tommorow. the problem is when i try to download i end up with a 505 error message saying: failed to change directory

Can anyone help?
 

A:DI-614+ firmware update

7 more replies
Answer Match 51.24%

I don't know much about firmware updates as I never had to do it but my DRW-2014L1Tburners are giving me some coasters in vista x64. Not 1 coaster under Nero 6 in xp pro.

I got the driver update listing in the sticky, went to the asus site to check on a firmware update for my burner's for x64 vista and there are 3 hopefully that will eliminate the coasters.

My question is: If I get the updates for the 64-bit vista will that interfere with those drives when I use xp pro ?

thanks,
kevin

PS: I use swappable drives; switching between vista x64 and xp pro.
only keeping xp for gaming and Nero 6

A:cd/dvd firmware update ?

Originally Posted by kem


I don't know much about firmware updates as I never had to do it but my DRW-2014L1Tburners are giving me some coasters in vista x64. Not 1 coaster under Nero 6 in xp pro.

I got the driver update listing in the sticky, went to the asus site to check on a firmware update for my burner's for x64 vista and there are 3 hopefully that will eliminate the coasters.

My question is: If I get the updates for the 64-bit vista will that interfere with those drives when I use xp pro ?

thanks,
kevin

PS: I use swappable drives; switching between vista x64 and xp pro.
only keeping xp for gaming and Nero 6



no the firmware should be backwards compatible

5 more replies
Answer Match 51.24%

Okay I want to update my DVD-rom Driver due to it having a difficulty playing LOTR-FOTR Special Edition.
Here's a link to LG's site http://ca.lgservice.com/index_b2c.jsp Link doesn't work.Got to www.lgservice.com than to Canada,than to device driver,dvd-rom,scroll down to LOTR-FOTR Special edition.Will tell you there.
Now I know that I have to download the files from www.bootdisk.com for Dos. 6.0.After I do this do I double click on the files,from Bootdisk.com and send them to a floppy disk?Than after that the 2 files from LG's site I put on this Bootable Disk?
Restart the computer type in the command and let it go?
If I do this wrong is there anyway of screwing up my Bios,I have a Dell computer and don't want to screw anything.
The Lg Dvd-rom I bought seperatly and installed myself.
Someone help me on this or was the above correct??
 

A:Firmware update....

6 more replies
Answer Match 51.24%

Im not sure how to update my firmware. Im having trouble burning CD-Rs with nero 7.0 because it keeps coming up with this calibration error. I posted that thread in this same forum ( http://forums.techguy.org/multimedia/453562-nero-issues-data-disks.html)
but it just leads to this new question about updating my firmware because it might be a possibility. Im also running SP1.

I went to this page called "the firmware page" link- (http://forum.rpc1.org/dl_all.php) and searched for my Disk Drive but had no luck in finding it. Even if I were to find it, how would I go about updating it, and how can I tell if its up to date?

Im running win XP and it is a Toshiba Qosimo laptop e15-av101
I looked in my computer/cd drive/ properties to see the name of my drive and hopfully I have the right one, it is a

MATSHITA dvd-ram UJ-830s.
 

A:How do I update my firmware?

16 more replies
Answer Match 51.24%

For those with any of the following, OCZ has issued a series of firmware updates for the OCZ Vertex 3, Vertex 3 Max IOPS, Agility 3, Solid 3 and RevoDrive 3 bringing the firmware towards version 2.22,

OCZ Technology

For those with Windows installed on it the USB stick method works very well (and easy to set up),

NEW! - Bootable tools for OCZ SSD's

List of resolved issues (as well as a direct download link) can be found here),

OCZ Vertex 3, Vertex 3 Max IOPS, Agility 3, Solid 3, RevoDrive 3 2.22

A:OCZ SSD Firmware update for...

Thanks! My Agility 3 will appreciate this.

1 more replies
Answer Match 51.24%

O.K. when originally wanting to do an Upgrade to Windows 8 i used VM to check it out.When i decided after alot of research to do the upgrade i used Windows 8 upgrade assistant.The message i receved on compatibilty was only one problem.Your PC Firmware doesn't support secure boot so you won't be able to use it in Windows 8.Secure boot requires firmware that supports UEFI v2.3.1 Errata B and has the Microsoft Windows Certification Authority in the UEFI signature database.Sure anyone who has UEFI like me received this message using this upgrade assistant.Through many hour and days of research on internet and other forums nobody seems to know how i can update my firmware,neither ASUS could advise me or Microsoft.To me i figured it should be a BIOS update,but no new ones are available for my system.So since i had no answers i decided just to do an install of Windows 8 Pro 64 bit (clean install) works well,faster then Windows 7.So far i like it.Only clue i have at this point was a site i found.Knowing my BIOS is a American Megatrend http://www.ami.com/Products/BIOSandEFIFirmware/AptioV/  Not sure if this is an answer to be able to do a UEFI install of Windows 8 Pro again to get full use of secure boot,GPT Partitions,but this is closest clue i got.BIOS stuff and flashing it can always be risky,rendering the motherboard inoperable,causing major issues,that i do not want to do.If anyone knows anything on this and can help with it would be very much appreciated i am stumped on thi... Read more

More replies
Answer Match 51.24%

Trying to update firmware on blu-ray but frm file will not write in Vista says I need supported writing software. What exactly do I need to do this?

More replies
Answer Match 51.24%

I have an Olympus Evolt-500 that won't update the firmware. I'm running XP pro with a DSL internet connection. I've talked to every tech support person Olympus has and they don't have a clue what's wrong.

It will recognize the camera and lenses but it will download from 50% to 83% of the firmware update, then a message pops up and says no connection to server and everything shuts off. They had me try the download with no firewall on and using just the modem no router. I've used Olympus Viewer, Olympus Master and Olympus Studio Trial version and they all download about the same amount before they shut down.

I'm open to suggestions at this point.
 

A:Can't update firmware

14 more replies
Answer Match 51.24%

I have Aspire E 14. Last night, I saw I have 1 critical update for firmware v1.17. When I clicked the update button it just says "updating" It just goes on and is not stopping. I closed the portal and a window appears saying reflashing. I saw it did reflash up to 100%, but why won't the critical update notification disappear on Acer Care Center portal? I also checked update history and the firmware is not yet included. I tried it again the next morning, clicked the update button, but still, it just says updating and can go on until you close the portal.  Any solution? Did my Aspire really did reflash? It seemed nothing has changed. Thanks in advance!

More replies
Answer Match 51.24%

I have Aspire E 14. Last night, I saw I have 1 critical update for firmware v1.17. When I clicked the update button it just says "updating" It just goes on and is not stopping. I closed the portal and a window appears saying reflashing. I saw it did reflash up to 100%, but why won't the critical update notification disappear on Acer Care Center portal? I also checked update history and the firmware is not yet included. I tried it again the next morning, clicked the update button, but still, it just says updating and can go on until you close the portal.  Any solution? Did my Aspire really did reflash? It seemed nothing has changed. Thanks in advance!

More replies
Answer Match 51.24%

Laptop is a Dell Vostro 1000 with XP Home SP3. Just installed a Crucial SSD. Works great. Tried to install a firmware update; not so great. Following the instructions from the Crucial site, I downloaded the update (it's an ISO file) and burned it to a CD. In the BIOS, changed boot order to CD drive first. Restarted the laptop. No joy - Windows still boots to the desktop. What could be wrong? I know almost nothing about using ISO files. TIA.
 

A:SSD Firmware Update

CD-image ISO files have to be written to CD in a special way, if you just copied the ISO file to a CD like a normal file, that won't work. There's a free app for creating a CD from an ISO file, it's called IMGBurn: http://www.filehippo.com/download_imgburn/
 

2 more replies
Answer Match 51.24%

Hi,

I have a Gigabyte CD-RW. model GO-R5232B. I downloaded a zipped Firmware of the same model from the Gigabyte website. Is it safe to update my hardware with this firmware even it has not encountered any problems for the past two years?

Tony
 

A:When to update Firmware?

9 more replies
Answer Match 51.24%

hi everyone. I would like to know if i should update the firmware on my ssd. It is not brand new, maybe 3 yrs old. ocz technology. I have neve done this. So i need to know how to figure out exactyly what i have and if i even need to.

any help would be much appreciated

A:update firmware

I don't see any harm in updating firmware. But please identify the firmware that you would like to update and what exactly are your doubts about doing it.

9 more replies
Answer Match 50.82%

HP-Update FIRMWARE update problem?
I got some critical update for my Seagate 320 gb hard drive?s firmware. I went to download an process the update, later it asked me to insert a blank disk. Well I don?t have a blank disk but I hit bootable cd anyway thinking it would create some file on the hard drive. Well obviously that?s not what it had in mind because my disk drive opened, I shut the disk drive and it started saying writing data to disk. HOW could it do that with no disk. I couldn?t close it. It then said installation succesfull. What the heck. I restarted my computer to see if I had screwed up my system and it seams to be running fine. Have I screwed up my hard drive? Did the dang update install? Can I delete these firmware updte files lying around on my desktop? Please help me????

A:HP UPDATE FIRMWARE update problem?

Originally Posted by GreatNate


HP-Update FIRMWARE update problem?
I got some critical update for my Seagate 320 gb hard drive’s firmware. I went to download an process the update, later it asked me to insert a blank disk. Well I don’t have a blank disk but I hit bootable cd anyway thinking it would create some file on the hard drive. Well obviously that’s not what it had in mind because my disk drive opened, I shut the disk drive and it started saying writing data to disk. HOW could it do that with no disk. I couldn’t close it. It then said installation succesfull. What the heck. I restarted my computer to see if I had screwed up my system and it seams to be running fine. Have I screwed up my hard drive? Did the dang update install? Can I delete these firmware updte files lying around on my desktop? Please help me????



It is ok.

I dont know what happened, but You HAVE to burn the bootable disk, and then boot into it after a restart in order to update the firmware.

22 more replies
Answer Match 50.4%

Hello, I am trying to use a Thunderbolt 3 to Thunderbolt 2 adapter (StarTech brand) to connect my P50 to a Resident Audio T4 Thunderbolt audio interface. The device is briefly detected and then disappears. I have been doing some research to resolve this issue and a few users have said that updating thier Thunderbolt NVM to 18 add compatibility with the adapter.  Would it be possible to get an upgrade from the current NVM16 to NVM18? Current P50 firmware (NVM16) link here:http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-p-series-laptops/thinkpad-p50... I have already attempted to install the NVM18 firmware straight from Intel but it looks like the firmware is OEM specific. Thanks!

More replies
Answer Match 50.4%

please help me to find dvd ram uj8c2 firmware new version. Because l can't write any cd while i had upgraded to windows10.it's  shows power calibration error by nero softwear.my dvd ram current firmwear shows 1.00

A:dvd ram uj8c2 firmware update

I have the same problem. Does anyone know a solution?

1 more replies
Answer Match 50.4%

Helo,   I have issue for updating Me Frimware on my desktop Hp dc7800p small form factor whenever I want to update it an error occour in command prompt showing that'' Error: could not know the last update for Me Firmware '' tell me what can i do .. i have also upadated bios to V 1.5 ...                               waiting for reply                                          thanks.

More replies
Answer Match 50.4%

Ye hi i have downloaded from Zyxels home page the latest Firmware and now my question is how do i update it? Because when i open the containing folder i have three files bin, pdf and rom. In the pdf theres just some information about what is new in the update and so on, but how do i open the two other files, i mean they are too small to be burned on a disk!!
 

A:Zyxel Firmware Update

You perform the firmware update from within the router's web user interface. Log into the router and there should be a option under one of the menus to upload new firmware to the unit.
 

3 more replies
Answer Match 50.4%

Hello all I have problem that I couldn't start windows(Only in safe mode) I recently installed HDD firmware(Barracuda Green Firmware Update) My disk is st1500dl003-9vt16l AND i recently installed MYSQL "mysql-5.5.8-win32.msi" I think problem is with HDD update ? And I don't want to refresh PC because there is Imporant job on some programs left.

A:PAGE_FAULT_IN_NONPAGED_AREA After HDD firmware update

Uninstall Mysql and see if that fixes your issue. if not, I suggest you contact Seagate support because they do warn that firmware upgrades can damage data on the hard drive if procedures are not properly followed. Good luck.

1 more replies
Answer Match 50.4%

Hi, Samsung tells me the SSD (a Samsung) firmware updates will come from Lenovo, but I didn't see them on the driver page. The model is MZMTE256HMHP-000L1 Any suggestions? Thanks,Bruce 

More replies
Answer Match 50.4%

Hi, I have a problem with OneLink+, where DP is not working. I believe a firmware update should fix this. The update.log which is returned from tp_onelinkplus_dock_fw.exe is: Version: 0.00.000Update result: 255Error description: Can't connect to Synaptics VMMxxxx DP hub IC The paradox is that I am trying to update the firmware to fix the DP and firmware won't update unless you have a DP already connected.  In my quest to fix this, I have downloaded many files some of those where for an incorrect model, pressumably the other OneLink. I am now wondering if I have overwritten the firmware of OneLink+ with that of OneLink. Is that possbile?  Is there any other way to fix this?

More replies
Answer Match 50.4%

Hi All: Just purchased a LG GSA-4167B using a USB 2.0 connection via an USB 2.0 External Enclosure. The firmware version that came with the drive is version DL10. There are later firmware versions available, DL11, DL12 and DL13. I would like to update to the latest version, DL13. Can I do it by downloading the DL13 zip file and just unzipping it or will I have a problem because it is using a USB external connection. There are no instructions on the LG download site for a USB connected firmware update. Any insight would be most appreciated.
Thanks,
Patrick
 

A:LG GSA-4167B USB 2.0 Firmware Update ?

7 more replies
Answer Match 50.4%

Hi, I have an issue with an E560 that is hooked up through a OneLink Pro to two external monitors (via Displayport and DVI). Both monitors randomly go black for 10-15 seconds and then come back (not at the same time). https://support.lenovo.com/ca/en/documents/ht101596 indicates that the firmware needs to be updated; however, after downloading the .exe for the latest firmware, I can't get the file to run! After I click on it, nothing happens. There is nothing in the task manager. I've tried running as Administrator and still nothing. Has anyone had any issues with the update tool or have any suggestions? Thanks, Andrew

More replies
Answer Match 50.4%

I see there's a firmware update out for the C50-30 with security updates noted in the changelog. Has anyone updated the firmware on a C50-30? Did it all go according to plan and the enclosed instructions? More importantly -- if it went wrong, how easy was it to recover?

More replies
Answer Match 50.4%

When I receive this drive will the Firmware have to be updated before use or, can that be done later on if needed? Thanks! SAMSUNG 840 Series MZ-7TD120BW 2.5" 120GB SATA III Internal Solid State Drive (SSD) - Newegg.com

A:Firmware update question on ssd

Hi,

You can update the firmware before or after, I would suggest it would be better doing it before

This version improves write performance, which is version 1.0,
click on firmware to view (you may be up-to-date):

http://www.samsung.com/uk/support/model/MZ-7TD120BW-downloads

Hope this helps

Cheers

Dave

1 more replies
Answer Match 50.4%

I did what it said to do in the instructions (I thought) and now my computer won't recognize the external backup. Here is the link to the enclosure.

http://www.startech.com/item/SAT352...ATA-External-Hard-Drive-Enclosure-w-RAID.aspx

How can I reflash the thing if I can't see it?
 

A:Firmware update problem

Try the external enclosure on another computer. Was the enclosure configured in a RAID configuration?
 

5 more replies
Answer Match 50.4%

Can't seem to find an answer to my question - Does the firmware update mean I have to reinstall windows? I have done firmware updates on other devices in the past, but not on a "boot" device, so just need an answer.

Edit: According to samsung it does not wipe HD, but just wanted people who have done an "inplace upgrade" to answer.

Edit: It worked fine through magician.

More replies
Answer Match 50.4%

I have a Toshiba Notebook with following internal DVD-RW drive: "TS L632D T004 Toshiba".

The problem is, this drive doesen't burn DVD+r DL without failures.
I made quite much attempts with 10 DL DVDs und five different burning suites, without success.
So I guess to fix this failure with a firmware update.

Can somebody tell me where I can get this update?

thanks :)

Best Regards,

A:Satellite X - Where to get firmware update?

Hi buddy,

Why should this issue related to the firmware?

In my opinion you should try removing the upper and lower filters in registry. Just follow this article:
http://support.microsoft.com/kb/314060

And firmware updates you can get from the Toshiba website.

1 more replies
Answer Match 50.4%

I know this might not be the place for this question but i have just downloaded a Firmware update for me modem but the files came in .rom and . bin and i am unfamiliar with these files how do i open them or with what do i open them with???

A:Firmware update for my modem

Your modem will open them. In the firmware update page, it will ask you to point to or upload the firmware file.

2 more replies
Answer Match 50.4%

I have a netgear wnr1000 v2. I have been in the router settings and had it check for the latest firmware. It tells me I have the latest and that version is 1.0.0.12NA. Now, when I go to the netgear website and look up my router here: http://downloadcenter.netgear.com/ it says the latest version is 1.1.2.54. So I download it and go to install it to my router and get the error "Firmware upgrade failed. Please check your file." I know it's the right file. Only 3 files are in the installation and they are .html, .img, and .txt, and the image file is the installation one.
 

A:Router Firmware Update

16 more replies
Answer Match 50.4%

I am trying to update but after some time it shows fail. firmware v 1.17 to improve touch pad

A:firmware v1.17 update failed plz help me

laptop model?which windows OS version is installed?

3 more replies
Answer Match 50.4%

Hi, i bought this network attached storage drive from Maplin Dual SATA Network Enclosure : Network Enclosures : Maplin

I tryed updating the firmware and got some message in German about how if i updated the firmware the network connection would be lost. i clicked ok and now after rebooting my drive cannot access it. i have reset it and cannot try to update the firmware again as there is not USB Port on the drive to access it directly from the computer.

Anybody have any ideas on what to do??

A:Firmware update gone wrong

Newer BIOS chips have what is called a boot block sector. When flashing the BIOS this part is not flashed. Basically all it does is run the floppy drive, and if you are lucky you will also get basic video. I have re-flashed a "dead" BIOS with this. The MB was manufactured in 1998. The first attempt at flashing failed-nothing but beeps on restart. I downloaded the correct Bios update, made a new floppy to flash the BIOS and reran the flash program. There was nothing on the monitor, just a black screen, but I could hear the floppy drive being accessed. Follow the flash utility instructions and let it do its' thing. It took several long minutes, but it worked.

I'm providing this link below. Do not hold me or vistax64 responsible.
Wim's BIOS Page: BIOS Upgrades, Motherboard identification and more...

Finally, you can approach your manufacturer of your PC or bios to purchase a replacement.

6 more replies
Answer Match 50.4%

Hey. I am wanting to update firmware for my dvd burner. I know it is a NEC DVD+-RW ND 3650, but after that i have no idea how (or even if I can) update its firmware. Any help would be great thanks!
 

A:Solved: Update Firmware

8 more replies
Answer Match 50.4%

i have been trying to update the driver/firmware for my pioneer dvd writer, and im having a problem running the software. the drive is the Pioneer DVD-RW DVR-108 and im trying to install the firmware version 1.20 i think its called(filename: DVR108_FW120B.EXE). i follow the vague instructions from pioneeraus.com.au and run the .exe file. and it comes up with a command promp window and i get a dialogue box pop up in front of that titled "UPGDVD" and it says "available target is not found".

i also tried to update the driver through device manager but there is no .inf file that i can find on the net so im pretty sure thats a no go.

if anyone knows a way around this problem or if there is another way to update my driver i would be very greatful if you could help.

im running xp with a P4 3gig CPU with 1gig ram and a 80gig HDD.
cheers
 

A:DVD R/RW Drive Firmware update help

First of all a firmaware update is not a "driver". all optical drives use the windows native drivers and only MS updates that. I have never seen a firmware update as you describe open a command prompt window. if Pioneer actually uses this method then you will probably have to set the command prompt to the location of your drive. ie; type the locaion ( drive letter of the drive you are updating) if your pioneer is the D drive then you would type D:\ and then press enter
 

1 more replies
Answer Match 50.4%

I am trying to update but after some time it shows fail. firmware v 1.17 to improve touch pad

A:firmware v1.17 update failed plz help me

laptop model?which windows OS version is installed?

5 more replies
Answer Match 49.98%

Hello everyone. Just a small query. Is it fine if I update my ATI drivers via CCC update utility or should I manually download the latest drivers, uninstall the old drivers (driver sweeper and all) and then install the new ones?

My CCC downloaded and installed the new drivers last night. PC is working fine, but just out of curiosity, is it OK?

A:Is it safe to update ATI drivers via CCC update utility?

- can't see a problem, the AMD link will direct you to the latest and most stable compatible driver available for your card..

- I'm assuming that you aren't messing about with overclocking and the like..

7 more replies
Answer Match 49.98%

I tried to update my dvd rw, but this is what I get.
 

A:Unable to install the firmware update

Make sure that all other ATAPI devices are disconnected, if possible. If the drive is no longer under warranty, try the PS0B stock flash from CodeGuys. Using this patched version may invalidate any warranty.

But, what is the reason for the upgrade? They just as often as not lead to problems.
 

2 more replies
Answer Match 49.98%

I took a firmware update downloaded from Windows Update. The machine shutdown and began flashing the bios. It then restarted and now does not boot at all. It does not even get to the BIOS. It simply restarts and goes to a black screen with no messages or failures. Is there  a way to flash the BIOS and/or Firmware from a USB key or DVD? Regards,J.M. Wiley

A:C40-05 Firmware Update Failed and Machine won't bo...

Welcome to the Lenovo Community !
 
Sorry to hear of the problem you are having.  Are you sure you got a BIOS Update from Windows Update?  If you did, that is a scary thought.  Windows 10 is good for giving you OS and driver updates whether you want them or not. Giving a BIOS Update is kind of over stepping their bounds IMHO.
 
Have you tried this.....
1. Unplug the charger / adapter. 2. Press and hold the Power Button for 15 seconds. 3. Plug in and power up the system to see if the problem was resolved.
 
If that didn't correct the problem, can you access the BIOS Setup by repeatedly tapping the F1 key when you first power up the computer.  If you can access the BIOS Setup then your problem is most likely an operating system problem with a driver update Microsoft gave you. 

1 more replies
Answer Match 49.98%

Samsung has recently posted firmware update EXM03B6Q for the 850 Pro on the download site.
I was unable to update via Magician so downloaded the ISO and ran it from a USB drive.
I was one of the lucky ones who didn't update to EXM02B6Q in Feb of 2015 which was a total disaster.
The update worked without any problems and speeds have not changed at all.
There is also a PDF installation guide for those who like to read first.
Don't forget to image the SSD first just in case. I did not, however loose data but better safe than sorry.

Tool & Software | Download | Samsung V-NAND SSD

Cheers

More replies
Answer Match 49.98%

I have a 4-year-old D-Link DIR 601 (cheap) router. It used to put out a little better than 42% (~38Mbps) of the speed I get hard-wired (92Mbps). Last week, that was cut exactly in half (19Mbps) after I made a few changes to the configuration which should have had nothing to do with the speed it delivers.

Questions:
Is there anything I can check in the router's config that might account for the drop in speed?
The firmware is 1.01 and I understand 1.04 is available, but the site asks if I have model A or B. I can find nothing on the labels about A or B. Where would I find that?
I tried downloading the 1.04 update for version A. It's a zipped .bin file which is not executable. How does one apply the update to the router?
The router has a reset button that resets it to factory settings. Could that solve the speed problem, or is it not worth trying?

 

A:Solved: Update firmware D-Link DIR 601

6 more replies
Answer Match 49.98%

Touch pad is not working also the update firmware v1.17 keeps on failing. Please help. Btw, I'm using Aspire E 14 E5-473-304W.

More replies
Answer Match 49.98%

I flashed my Toshiba slim-drive SD-C2502 DVD-ROM with the latest firmware from Dell's website.

After it didn't work and it gives me the IDE #1 error before booting to Windows XP. I know I can eject before the error message but after that, it just doesn't eject at all nor detected.

I tried flashing it again but there is no drive it can detect to flash it. From the past, it seems like no way but I was hoping I can force flash it perhaps?

Any other suggestions would be grateful.
 

A:DVD-ROM not detected after firmware update...is there HOPE?!

Heh. I hate to say it, but I think you're dead in the water. Up the river with no paddle so to speak. It sounds like you're going to have to replace the drive.
 

3 more replies
Answer Match 49.98%

Hi!

It took me almost one hour to find this firmware update for my ADSL modem so that's why I uploaded it to Skydrive and make it hopefully a little bit easier for you.

My modem kicked me of the web a few times every day and then it also had a "broken internet connection" so that there was a little yellow notification triangle on the network adapters icon even if the "internet providers" signal was ok it couldn't connect...

Any how, I updated the firmware and I have been running it for a few days now and no connection problems.

Here is the link and there is also a manual included (and in the comments you can see a really short description on how to update the firmware).
 

More replies
Answer Match 49.98%

Hi - I was able to solve connect issues by updating firmware on my wireless router - wifi weirdness

But now my printer is not available (to this or any other laptop/macbook on the network.

How do I install/re-install my brother 9840CDW to my little network here?

Help! I need it! Thanks

A:(Re-) Installing a printer after firmware update

Have you disabled your network then re-enabled it & Also reset your router ??

8 more replies
Answer Match 49.98%

i was trying to update my SONY DVD Drive fireware yesterday,
but it failed, i mean can't complete process.

After i reboot, theres no Drive display in MY COMPUTER &SYSYTEM Properties(Device Manager) and the DVD Drive's power bottom is not working too(can't eject/close)
CAN ANY ONE TELL ME HOW TO FIX???????????
THANKS

My DVD Drive
Sony DDU-1621 DVD-ROM 16X/48X
 

A:DVD DRIVE Firmware update Fail???

7 more replies
Answer Match 49.98%

HI!

I put in my IP address, and get to the modem. I believe there is a way to take my modem out of the mix and update the firmware on my Linksys router, but I'll be darned if I can figure it out. I called Linksys, but they want me to sign up for 90 day tech support, and I need to spend the $$ on a new router if the firmware update doesn't solve my problems! :-/

Can anyone help me?

I have a Motorola SB6141 modem and a Linksys EA6500 router.

Thank you!!
 

A:Want to update Linsys Firmware, but modem in the way....

16 more replies