Tech Problem Aggregator

xp media center "disk is full" message

Q: xp media center "disk is full" message

Help! I keep getting the message "Disk is full. TV can't play because the hard disk you chose in Settings is full. Clear space on this drive or choose another drive." The problem is I have lots & lots of free space left on my drive( like 120GBs) I use a HP Media center pc, & have contacted their support several times, it always boils down to " do a non-destructive recovery" & then "do a destructive recovery" These both work for a little while & then it all starts over again. I haven't been able to identify any new software, etc. that might be causing the problem. Any ideas out there??

A: xp media center "disk is full" message

Hi, and welcome to tsg - please add a reply to your post if you still have a problem with your PC include any updated info.

2 more replies
Answer Match 89.1%

When I go to the Winows XP Media Center I get the error message "There is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR3.".

When I first set up Media Player about 8 months ago I got this error message and doing a search I was able to find a fix. Then I had a problem about a month ago and reformatted my hard drive and did the same thing and found a fix.

Well, just had to reformat again and now I can't remember where I found the fix. Can someone help me?

Thanks! Oh - and BTW can someone tell me how I can find where the programs that I recored are stored.

GarysMom
 

More replies
Answer Match 102.48%

I reformatted my computer recently, with all the same hardware and software I usually do, but this time I noticed something different.

On my E: partition (non-system), there is a folder called "9ca233a934811ecf86022b48e5" which contains two folders: "AMD64" and "i386".

I researched a little bit, and found out those folders pertain to a windows 64-bit edition, but I don't have anything to do with a 64-bit edition, mine's a 32-bit.

Here's my system specs:WinXP Media Center Edition Version 2002 SP3
Intel Core 2 Duo Processor E6300
3GB RAM
NVidia GeForce 7600 GS 512MB
ST3300831AS 300GB HD
I have my HD partitioned to 3 drives:14GB System Drive (C:)
40GB Document Drive (D:)
190GB Storage Drive (E:)
I also have 40GB partitioned as an Acronis True Image Home Secure Zone, for storing Disk Images.

I was wondering why those two folders are on my E: drive, when I'm running a 32-bit version of Windows. Also, (sorry if this should be in another thread) my computer has been restarting unexpectedly while I've just been doing random things on it. Nothing graphics-intensive, or anything like that, so I don't know why it's doing that either.

Thanks for your help and time,
Nic

A:"AMD64" and "i386" folders on WinXP Media Center 32-bit edition

It sounds like those are temporary files from a driver installation. A lot of companies seem to package every possible driver in the zip or executable, extract them all to the hard drive, find the one the system needs and copy it to the system32 directory, then leave the rest behind.

In that case they should be safe to delete. It would take a bit more research on your part to make sure. Maybe a readme or help file somewhere in the directory?

3 more replies
Answer Match 91.98%

Hello,

First of all sorry for my bad english. But i'm from belgium, i do my best.
I have a windows vista and a few days ago he started to say "C" disk full. I've looked with a few programs what the real size is and it is 19 Gb but the vista shows 74,9Gb of the 75Gb in use.I've ran Ccleaner, Cleanup... etc and he deleted every temp file. But still without any succes. Even if i try to copy a file of 1Gb into the "C" folder he says there isn't any room any more. Does anybody has an idea what there is hapening ?

Kind regard Peter

A:Vista shows "C" disk full but he isn't full

Hey, Welcome.
Is it a Toshiba laptop? I know that some Toshiba laptops have a backup utility that is on by default that basically backs up all your information into a temp directory. Your computer might be doing the same thing. You can change the settings for this from the Toshiba recovery console, or something like that. It was located under the start menu/accessories area. Of coarse it might be a different in your case.

6 more replies
Answer Match 91.14%

I am trying to set up media center to display the "my programs" tab but have been unsuccessful for the last few days. I dont know if its a problem for Vista X64 or what.

I have a snes emulator and mce browser that i want to see in media center. Has anyone using Vista Home premium x64 had any luck? I know you can add items in the task bar setting but there isnt a catagory for "programs"

Please advise

More replies
Answer Match 90.72%

Ok, I built a PC a month ago and everything seemed find no problems of any sort. The other night I defragmented my hard drive and shut it down and turned it on today to a memory test and the message "Disk Boot Failure, Insert system Disk and press enter"

The computer has access to the XP pro w/ sp2 disk only as a boot device but it will not recognize it now.

I have set Cd-rom as 1st for boot sequence then hard drive I have no floppy drive and the bios has been configured to know that.

I am not sure if this means anything but in the bios the IDE Channel 0 Master says none and when I try to turn on auto detection it wont detect a hard drive.

The HDD is fully connected and has not been touched since I installed it a month ago.

I have this awful feeling that I fried the HDD when I defragmented it last night.

Any help would be very much appreciated. But please be simple this is my first build and my knowledge at this sort of thing is very very sketchy at best.
 

A:Error message "Disk Boot Failure, Insert system Disk and press enter" on first build

The first thing to do would be to get a new data cable for the herd drive and see if that fixes it, they are nice and cheap nowadays.
 

4 more replies
Answer Match 89.88%

"Media center extender service" gets disabled when adding extender. Help?

Title says it all. I'm trying to connect my 360 to my Win8 PC, but I keep getting "cannot connect to the extender" because of this service shutting down. Everything works fine on my Win7 laptop.

More replies
Answer Match 89.88%

Hi all,
I recently reformatted my hand-me-down HP Media Center PC (m7640)
OS is Win XP Media Center Version 2002 Service Pack 2

(see above image for serial #, etc)
Using the recovery/reformat boot sector. HP seems to have used this drive sector (since HDD's never go bad...) in lieu of offering an OEM OS disk, but the perk is it install all of the drivers and pre-runs the windows setup steps for you. Problem is, it didn't get the graphics driver right. Every time you reboot it prompts you to install the drivers for your "video controller"

and if you do "search the computer/windows update" it finds nothing. The tower bears an NVIDIA sticker on the front, and if you go to the HP support page it tell you the download you need is for "NVIDIA GeForce 6150 LE Graphics Drivers" which is a file called "sp26796.exe"
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=3245032#N1064
When you run the downloaded file from HP it opens the standard NVIDIA install screen and runs through a quick step before aborting, notifying you that these drivers are not applicable to your hardware.

Did I wrongly the driver/video card? Is there a way to get just the .inf's (or cab's or whatever) so I can just tell the windows driver install that I "have disk" and can skip the issues with the NVIDIA GUI installer?
 

A:Solved: "Video Controller" drivers for HP Media Center m7640

Download and install the chipset driver (sp26802.exe), reboot then try to install the graphics driver.
 

3 more replies
Answer Match 89.88%

I was looking for a solution to this, but found none. Not even close.
Im getting "TUNER NOT FOUND" message due to ehrecvr.exe service not being able to load. Why this happened I have no clue.

I am seeking an experienced person who might shed some light on the matter.

I have a problem like MANY, many others with Vista Media Center not recognizing our TV tuners after some time. (Yeh it was working perfect at clean install,...)

We know it is related to the fact the Windows Media Center Receiver Service cannot start.

Ive combed the net for any info regarding a fix for this, but failed to find any (found a gazzillion solutions for MCE 2005 tho).

After 5 Vista instalations it happens over and over again after a while. Doesnt matter what software we install, what codecs packages we use, there is no pattern I could dettect. VMC is soo darn sensitive. And help for this issue is not forthcomming from any source.

Needless to say im tired of repeated install after install of Vista, to watch TV in the Media center just to do it all over again after the service "crashes?!?".

Im begging for help for this pesky problem, please?

Soo far what I found/ruled out:
? Its not a driver issue, cause we used different TV tuners and they all had Vista MCE suppoort, and TV was working at clean install, even after codecs were applied.

? It could be 3rd party applications but we failed to pinpoint which one, cause people reporting this pro... Read more

A:Vista Media Center - "Tuner not found" HELL

And here is the error of the service itself.

5 more replies
Answer Match 89.88%

Hello,

I'm a new poster here and I discovered the forum while searching for a solution to a problem that I am having with my Windows Security Center being turned off.

This is the last symptom of a problem that I noticed about a week ago. At that time my Google searches in Firefox were being hijacked to other sites on a pretty consistent, but not 100% basis. Google searches in other browsers, IE9 and Chrome still worked. Also my System Restore functions had been monkeyed with so they looked like that was not working (wouldn't open) but I could tell that it was actually working and the error message was spurious.

I was able to restore the Google search functionality in Firefox AND get system restore back by installing and running SUPERAntiSpyware. That program found several bits of malware and apparently fixed most/some of them. (Yes, I purchased a copy immediate--out of gratitude, if nothing else!). I also own a copy of Anti-MalwareBytes and ran that, but it found nothing.

I thought I was good to go, but today I noticed the little flag icon in the system tray was red X'd and I discovered the error message about the Security Center is turned off. I tried going to the service center and turn it on, but same error. I tried opening the list of services and there is none for Windows Security....so I'm assuming some malware has either removed or disabled the files in there.

As I mentioned I came here via Google search and read a long thread about a similar probl... Read more

A:Error message: "The Windows Security Center is Turned Off"

After posting my message above, I continued to Google around and found a page with directions about restarting the security service. I guess I'm not SUCH a "savvy PC user" after all, as I had missed the exact name of the service and I reported it missing above.

I re-enabled and then restarted it and it seems to be functioning again.

Thanks for anyone who read the entire message and my apologies for wasting your time if you did.

Stephen Porter

3 more replies
Answer Match 89.88%

Hi all, just saw this in the bottom right tray a red windows security alert, when I click it on it says Malware protection, windows did not find any anti-virus software. Although I do have super anti spyware loaded on this machine. I have attached a screen shot.

Any help would be appreciated.
 

A:Solved: Windows security center message "Malware protection not found"

16 more replies
Answer Match 89.46%

[third attempt to post]
I recently bought a brand new Hewlett Packard computer. It prompts you to back up your files and gives you the option of selecting the backup drive 'd' or writing to dvd. I selected writing to the backup drive.

The system tried to backup my files but sent an error message 'recovery drive full' It continues to prompt me to backup my files.

I solved this problem by going to the HP website, clicking on 'troubleshooting' and entering the details of my computer. I then found an FAQ somehow.

The page explained that I had been wrong to select the d drive to back up my files (how foolish of me to choose one of two options offered.) It said that the D drive was only small. I must delete the file already created there and then change the settings to create a backup onto a dvd drive instead.

You delete the backed up copy of the file by going to start/computer/HP recovery d/ where the first folder you will find will be one with the name of your computer eg. in my case Anna-PC. You then delete this file.

You then go to start and type 'backup' in the search box. Select 'backup and restore center' then 'change settings' then 'change backup settings' then give your permission to continue, then select 'DVD rw drive e' which describes itself as 'on a hard disc, cd or dvd' .

I wondered if there had been some sort of design error. Why did they give me that option i... Read more

A:"recovery drive full." error message Hewlett Packard Pavillion Hp dv2500

Actually what concerns me more is, I wonder if you have deleted files in your recovery partition.
It's usually hidden from inside Windows, so I expect no. But by chance did you receive a Windows CD or just a recovery partition (because the recovery files may now be gone)

As for the location, think of it this way, it will show all areas that you can backup to. I think even the floppy drive (if you have one) this is to give you the full choice, instead of putting restrictions on your own computer (which most don't like)

That's why.
 

2 more replies
Answer Match 89.46%

I keep getting on random programs where it says "a program is trying to enter full screen. Do you want to switch the program to full screen?" and if I say yes (especially on a program that shouldn't be full screen) the computer will ALWAYS freeze up! I Googled that message but it didn't come up, and Googling it in quotes results in "no results for" "searching without quotes"!!!

A:"a program is trying to enter full screen" message

This says it's for older versions of Windows but the instructions are still the same. Just reverse the instructions and make sure the programs are set to Normal and not Maximized. http://www.answersthatwork.com/Downl..._maximized.pdf

1 more replies
Answer Match 89.46%

I keep getting a full screen "Compaq Reminder" to make recvoery disks, which has already been done. This message originates in a HP file, HPTCS. Before I delete this file I would like to know if I will screw up anything else. Other PC's are afflicted with this, so I hope that I can get some help here. TIA, Dick Mahar.
This began to happen recently. Although the PC has been in use for about 3 years.All upgrades are complete.
Win 7 , 64bit, otherwise no problems.

A:"Compaq Reminder" full screen message

Try turning off the reminder.

HP and Compaq Desktop PCs - Preventing Reminder Messages from Opening in Windows 7 - c02029676 - HP Business Support Center

2 more replies
Answer Match 89.46%

Hello,

Does Windows Media Player (not Windows Media Center) play DVDs with "Windows 8 Media Center Pack" installed on Windows 8.1 Pro update 1?

Many thanks

A:Does WMP (not WMC) play DVDs with "Media Center Pack"?

WMC will play DVD's

8 more replies
Answer Match 89.46%

Hi all, Every few days I keep getting this message in the Notification area of my Desktop :-"Insert Removable Media (Important)Windows backup needs a CD\DVD or USB drive to continue"I insert a CD, Windows backs everything up, and the message disappears.Three days later same things happens again. I have a whole pile of CDs with Windows backup on it.Question: How can I stop this message from reappearing and annoying me ?I already have a System Restore point etc. do I really need the Backup CDs ?Thanks.

More replies
Answer Match 89.46%

I'm attempting to set up Media Center for the first time on this PC (and the first time ever for me, too). As soon as I start Media Center for its setup, I get an error message that Media Center is unable to open Messenger and tells me to be sure Windows Messenger is installed on my system.

I checked Task Manager and it shows MSMSGS is running. So I downloaded Windows Messenger 5.1 and installed it again.

I still get the same message.

And, yes, I did restart the system.

Any suggestions?
 

A:Media Center says "Unable to open messenger"

Microsoft broke it with one of the Security updates (KB946648)
There is an entire thread on this issue at the Green Button: http://thegreenbutton.com/forums/1/287767/ShowThread.aspx

This post has the easiest solution.

Which is basically to add this to the registry:

Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\ehshell.exe]
"AllowMessengerExecHandleFailure"=dword:00000001
HTH

Jerry
 

1 more replies
Answer Match 89.46%

My Vista PC keeps forgetting settings upon shutdown. I have 2 HDs and I wanted to put all the recorded tv shows on the second hard drive. I told media center to record to that drive and moved all of the previously recorded shows over to the second drive. I told VMCE to watch the new location instead of the old one. This worked at first, but when I restart it just says "No Recorded Shows" in Recorded TV. If I go to Add Recording or View Scheduled, and then go back, they 'magically' reappear...

------

I've also had problems with random freezing... I just added the second hard drive. I just installed it and then found it in disk manager and formatted it. I couldn't find a "master"/"slave" switch, but I have no problems with booting or accessing either hard drive. However, if I boot to the Vista CD and try to do a repair, it can't find the OS... It could before though... Aside from that, I installed two programs: DVD Shrink 3.2 and DVD Fab 5.

----

If I need to make a second thread for the second problem, that is understandable, but I think they may be related because they began at the same time...

More replies
Answer Match 89.46%

Fortunately (or unfortunately) for me I have an MSDN account and had early access to SP1 for Vista. I installed it a few weeks ago and noticed one problem. In media center, everytime I go to "internet tv", media center crashes. It worked great before and I used to watch "Arrested Developement" on it all the time. The day I installed SP1 it stopped working and hasn't since. Any one else had this issue? Or anyone know how to fix it?

Thanks
 

A:SP1 breaks "Internet TV" in Vista Media Center

Might I suggest removing SP1. There is a reason it's not available to the public yet.

http://www.theregister.co.uk/2008/03/17/microsoft_vista_sp1_delay/
 

1 more replies
Answer Match 89.46%

hello, i'm running windows 7 ultimate 64 bit and i'm trying to setup my tv signal on the windows media center. i have a hauppauge pvr150mce card who comes bundled with a microsoft ir transceiver including the ir blaster. when i run the tv signal setup wizard, after selecting the source, i get an error saying "ir hardware not detected". that is weird because the ir devices is installed and listed in the device manager ("consumer ir devices" under system devices and "mircosoft ehome infrared transceiver" under human interface devices). more than that, i can even use the remote within the media center application and it is fully responsive and working) but every time when i try to setup the tv signal i get the same weird error. because of that i can't even skip this stage and i can't setup tv signal on media center. i've already read any threa on the internet and tryed everything. uninstalled the devices and reinstalled them. connected the device in different usb ports, installed latest win7 updates from the hauppauge website. the hardware is listed in both the hauppauge website and microsofts as fully comaptible with win7. it also worked fine with vista. what can i do ???...

A:windows media center - "ir hardware not detected"

Ok after millions of attempts trying all sorts of things i finally ended up shoving two headphones into the jack of the usb hub for the MCE remote and vaalla it worked got past the ir hardware detection although it doesn't control my set top box like it used to before in vista I'm satisfied for now till i get around to buying some IR bugs. i hope this helped because it sure drove me nuts

14 more replies
Answer Match 89.46%

Hi

I am trying to copy files onto a drive which is 279 GB free of 2.99 TB.

I am getting the error "Disk is full" when doing this.

I am not sure why as there is plenty of space available.

This happens with large and small files.

Here is a screenshot of the storage the drive has.

Any help will be much appreciated.

Thanks

More replies
Answer Match 89.46%

Hi

I am trying to copy files onto a drive which is 279 GB free of 2.99 TB.

I am getting the error "Disk is full" when doing this.

I am not sure why as there is plenty of space available.

This happens with large and small files.

Here is a screenshot of the storage the drive has.

Any help will be much appreciated.

Thanks

More replies
Answer Match 89.04%

My wife has a two month old Lenovo ideapad with Windows 7. We are now getting alerts that the D partition is near full. Is this system taking multipul backups of the harddrive C and storing them all? What are my best options to have a safe backup, but not overloading the D partition? I do see in; Computer>System>Device Manager>Disk Drives>D Drive General tab that there are two options at the bottom.
option one, (not checked in my case) "Compress this drive to save disk space".
Option two, (checked) "Allow files on this drive to have contents indexed in addition to file properties"
Would selecting option one solve my problem? If this system is saving a snapshot of D over and over, it will only be a matter of time when option one will be overcome.
SO, I would think that there has to be a setting that will let partition D delete older backups...right?

Would it be a combination of selecting option one and changing a setting that would enable older backups to be automaticaly removed?

A:Action Center "Check backup disk space" alert

Welcome to the forum
If your D drive is made for backup's only, you can delete all files exept the newest one.
But it's advised to make backup's on an external USB drive and change the frequency of backup's to your files and olso for images to your OS.

4 more replies
Answer Match 89.04%

NOTE: Her laptop is running Word 2000, not 2003. Sorry about that!

My wife is running into an error with Word 2000 whenever she attempts to save a certain type of document.

She is created data graphs in Excel and then copying and pasting them into a word document along with text, analysis, etc.

When she goes to save the file to the C: drive, she gets an error saying the disk is full. Meanwhile there are many GBs of space available on the C: drive still. Also, this does not happen when attempting to save a regular Word doc or the Excel doc the graphs have been generated in. Only when trying to save the Word doc with the Excel graphs pasted into it.

Any tips on what may be causing this and how I might be able to fix it? She's working on applying for an important grant and this is obviously hindering her progress,

Many thanks in advance.

Mike
 

More replies
Answer Match 88.62%

LG Television Model LG65LM6200 With built in WI-Fi gives error when downloading from internet:
"Browser memory full,closing browser"
Computer is Toshiba P505 ,wireless router is 802.11n D link

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Turion(tm) II Dual-Core Mobile M520, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 3838 Mb
Graphics Card: AMD M880G with ATI Mobility Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 465231 MB, Free - 392847 MB;
Motherboard: TOSHIBA, Satellite P505D
Antivirus: avast! Antivirus, Updated and Enabled
 

More replies
Answer Match 88.62%

Can anyone help me? I'm trying to use either my Palm PDA or my mobile phone as an mp3 player. I'm trying to load all the birdcalls of Britain & Europe (don't ask) - a total of 1008 tiny tracks adding up to 93 MB. I've tried various cards but when try to I load them via a card reader I get a message saying "disc full" after about 10% - 30%, depending on the card size. I've tried everything up to 512MB so far. What's going wrong here? I'm using Mac OS10.3.9, Kingston and Integral cards. I haven't done a post like this before so I have no idea what help to expect, but any thoughts welcome.
 

A:SD/MMC Cards - "card full message"

card full can occur two ways;
1) all the space is taken or
2) the maximum number of files have been loaded.​It's hard to believe that #2 occurs with only 1008 files --


load the MMC into a card-reader,
attach the card-reader to XP,
find the drive letter by opening My Computer, and
then run->cmd /k chkdsk the-dl-letter:

you will get some messanges and near the bottom, you will see
some rows and one will declare the max files allowed
 

5 more replies
Answer Match 88.62%

After installing Windows 8.1, Media Center would not recognize the tuner. Download and install the WinTV v7 drivers dated 6/10/2013 from the Hauppauge web site Hauppauge: Support for WinTV v7

More replies
Answer Match 88.62%

Media Center has worked fine. While moving my computer, I disconnected the tuner and reattached it, ran the set up, and now I get the above message.  I've rebooted and still get the message.  Please help!

More replies
Answer Match 88.62%

First time here and posting, but this site often comes up near the in Googling for help, and I (and MS support) would appreciate your knowledge here.

On my PC there is no "play with" or "Send to" menu for the optical drive in my PC under W/8.1, though it recognizes the DVD in it, and both VLC player and Jet Audio have added themselves to the right click menu.

I can play the DVD using Windows Media Center (C:\Windows\ehome\ehshell.exe) if i launch it first, but would like to add it to a play with menu, or even have a send to menu for that drive.

Believe it or not, MS tech support ( 1-800-642-7676) has spent hours (free so far) in 3 different remote sessions trying to do this, the first of other issues i called about, and is due to call again (then they go to remote) at 5.30, but as this should not be the hard, i thought you all would know how to do it. (You can then send them the bill!)

I have search regedit for "Play with," "media center," "ehshell.exe," and can see that VLC player added a Open key to play with VLC player and a command subkey pointing to the app, but have found nothing that i could figure out how to do the same for "media center," "ehshell.exe."

Note that this is not a big deal as i can play the DVD by launching the Media Center first (which i put a shortcut to in My Computer by using RightClick Extender), but apparently MS forgot to add a "play wit"h menu to the opti... Read more

A:How to add "play with Media Center" to DVD drive in W. exp

I'm not quite sure I understand what your looking for. However, you can set AutoPlay in Windows 8 to launch Media Center when a cd or dvd is detected.

14 more replies
Answer Match 88.62%

I just got a really nice "emachines" (I know how that sounds) Computer. And I just installed the operating system buts it got all sorts of crap that I don't need or want. But when i delete them some of these programs don't fully leave the computer, such as AOL browser and things like that. Is there anyway to really remove these from my hard drive?
 

A:"Bugged" Version of Media Center

You are going to have to be a little more specific.
Are you running XP Media center edition or Vista (which comes with media center)?
When you say that the programs don't fully leave your computer, what do you mean?
Can you still run them?
 

1 more replies
Answer Match 88.62%

Hi all

I am running windows xp up to date
Windows xp media center edition 2005 version 5.1.2715.2773
update rollup 2

I have a HDHomerun Dual tuner that is working with the software that is installed in the Homerun set up (quicktv).

When I go to use the set up in windows media center it says "tuner not available, please restart the computer".

I have goggled potential fixes and can't seem to find anything that will work.

Any help would be appreciated,

Thanks

A:Media Center "no tuner available error"

Quote:




MCE 2005 requires an Analog/NTSC TV tuner adapter to be present before it will allow a digital tuner to be detected. Check that a Analog/NTSC TV tuner is installed and working.
The ?MCE Rollup 2? update is required:
Microsoft Download Center
bc51-81cf2b56fe6e&displaylang=en




According to their Setup Guide Quickstart Guide ? HDHomeRun DUAL MCE required that there is a analog TV tuner installed on the computer before it will recognize the Digital Tuner. Try updating the MCE Rollup and see if that helps. Or post in Siliconsdust's Forum

2 more replies
Answer Match 88.62%

After installing Muvee Autoproducer and restarting my computer, I get continuous error messages that Media Center has encountered a problem and must shut down. When I uninstall (or if I install and do not restart) Muvee, the error goes away, but I bought and want to use this software without the annoying messages. Please help. I bought the extended service warranty from HP and they were no help and microsoft won't help for less than $79...no customer service for Muvee. I am running windows XP on a HP pavillion Media center pc. Very appreciative for any help to make error messages go away.
 

More replies
Answer Match 88.62%

In an emergency we recently purchased a computer at a local dealer. The system came with XP Media Center 2002 pre-installed and was put to use immediately instead of first installing our corporate version of XP Pro SP2. Since Media Center is not able to join a domain, we have tried to upgrade it to XP Pro SP2. However, none of our licensed CD keys work for an upgrade and we seem to be stuck with performing a clean installation . Since this machine is used for data acquisition on an instrument, we would like to avoid the downtime involved in re-installing and re-configuring all of the required software. Does anyone know of a way to perform this upgrade?

Thanks in advance...

More replies
Answer Match 88.2%

My desktop computers disk space has been pretty full for quite sometime, I have been deleting unused files and running diskcleanup, but I can't make any headway! I don't even have enough space for the disk defragmenter to work.

I thought if I bought an external hard drive and moved all my kids photos and music files to it, the problem would be solved.

So I got a "My Passport", I don't think it is what I expected! It is "synchronizing" my computer.

After it's done will I be able to delete the photo and music files from my PC, and then when I want them just access them through "My Passport"?

A:Disk is 98% Full, Bought "My Passport", Now what do I do?

Did you install any special software on the computer to do this "synchronization"? All you have to do when you buy a hard drive is attach it to the computer, wait for the computer to recognize it as an external mass storage device, then go to explorer and start dragging and dropping files and folders on it. Uninstall any software you installed on the computer that came with this hard drive and just try it the easy way.

1 more replies
Answer Match 86.94%

I have windows 8 pro installed for a month or two now and just upgraded to 8.1 today. I said I'd go with the pro version since it had the media center...

I thought it was a downloadable app or add-on but when I went looking to install it today it seems that..
correct me if I am wrong, but even after buying the pro edition of Windows 8 I still have to pay to download the Windows media center?

Is that correct or is there something I'm missing?

A:Windows 8 "pro" media center?

If you want WMC you have to have Windows 8 pro you cannot upgrade Windows 8 to WMC. WMC is a $10.00 upgrade.

5 more replies
Answer Match 86.52%

Ok where do I begin?! I have been dealing with viruses, spyware/malware for the past week. It all started with Norton advising me that I had been infected with Trojan. Vundo and Trojan.Zonebac. After that I started receiving many different pop ups warning me about critical system alerts. I also had an annoying yellow triangle at the bottom of my screen warning me about different trojans and worms. More evil friends included 2 new icons that had made their home on my desktop one named "Live Safety Center" and the other "Online Security Guide", also installed was a new toolbar named "Security Toolbar 7.1". I have scanned my computer with many different programs and have somehow finally managed to get rid of the pop ups and toolbar, although I know I'm probably still infected somewhere. I'm sorry this is so long but, I wanted to explain EVERYTHING! I'm running Windows XP SP2, and have followed all steps to post. I downloaded DSS, but after many attempts to run, it just wouldn't let me. I do have a fresh hijackthis log and my Panda report, I hope this is good enough.
Many thanks in advance to whomever helps me, I am desperate!
Monica

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:58:35 PM, on 11/15/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe... Read more

A:2 evil friends on desktop "Live Safety Center" and "Online Security Guide" Help?

Hi, thanks for trying to perform all the steps.


Quote:




I downloaded DSS, but after many attempts to run, it just wouldn't let me.




At what stage does DSS stop working?

7 more replies
Answer Match 86.52%

I'm trying to save an image in Photo Deluxe and a message pops up saying my "scratch disk" is full. I don't have a clue as to what this means. Can anybody help?
 

A:My "scratch disk" is full (whatever that is!)

13 more replies
Answer Match 86.52%

When trying to download a larger file from another user on ICQ, I get a box saying my Disk is Full. I have around 65GB of free space. Anyone have any Ideas why this should be. Thank you.
 

A:ICQ tells me "Disk Full"

6 more replies
Answer Match 86.52%

Why has my local disk "d" nearly full,?? is my computer backing up files,all the time,?


 

A:Local Disk "d" Nearly Full,??

Hy my friend , is there an win old folder in your system ?

http://www.sevenforums.com/tutorials/19151-windows-old-folder-delete.html

Recycle bin is empty ? You could read this

http://www.howtogeek.com/125923/7-ways-to-free-up-hard-disk-space-on-windows/
 

1 more replies
Answer Match 86.52%

I'm trying to burn a DVD+R in my DVD burner. I bought a new pack of blank Maxwell DVDs and everytime I try and burn I get an error saying that the disk is full. I've tried using multiple programs including: ISOBurn, Ashampoo, ConvertXToDVD, DVDShrink, and DVDSanta. All give the same error.

I had a package of Verbatim DVDs and got the same error, I thought it was the disks...so I exchanged for these and get the same thing...

The drive I am using is a Toshiba SD-R5272, more information on it can be found here.

So any idea how to fix this? I really need to burn some of this stuff to DVD for work...so any and all help is appreciated.
 

A:DVD+R Burning - "Disk is Full"?

6 more replies
Answer Match 86.52%

This began after dumbly going to some non-commercial website. NAV auto-protect did initially detect an infection, but indicated it could not quarantine or delete.

Now when launching IE6, it attempts to redirect to a fake virus software website. When I choose the "not recommended" link, IE crashes shortly afterward. Also, I get a fake "Security Center Alert" popup every few minutes. I stupidly clicked on the link to update the security center.

With System Restore deactivated, I have run (all updated, full scans in safe mode) NAV, Ad-aware, Spybot, SpySweeper, Avira and CCleaner. (Then I found this website and learned I should have waited to do this.) Spybot found a couple of registry entries, but that was the only detection made by any of the programs, other than NAV's initial auto-protect message. File gmer.txt is attached.

dds.txt:

DDS (Version 1.0) - NTFSx86
Run by Mike at 13:22:43.09 on Sat 12/06/2008
Microsoft Windows XP Professional 5.1.2600.2.1252.1.1033.18.2038.1399 [GMT -6:00]

============== Running Processes ===============

C:\Program Files\Webroot\WebrootSecurity\WRConsumerService.exe
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
svchost.exe
svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\Symantec Shared\... Read more

A:IE crash after "Insecure Internet activity", "Security Center Alert" popup

Before any work can be done on this machine, there is something that requires your immediate intervention.

This machine is messed up pretty badly because you have several anti-virus programs on your machine. That's not a good idea!!

Alike firewalls, anti-virus programs have conflicts co-existing with each other & produces undesirable results. Please uninstall ALL leaving only one of them.

ALL the antivirus programs must be removed via add/remove program.
For any program that doesn't have an add/remove entry, you will have to do this:re-install the program -> reboot -> uninstallPost a fresh logs when you have completed the above task.

11 more replies
Answer Match 86.1%

I have tryed to play audio and video files on my computer and I get the following message, "This program has performed an illegal operation and will be shut down." If the problem persists, contact the program vendor."

I then close the message and the media player shuts down.

Help.

P.S. I am using Windows 95 and Media Player version 6.4.
 

A:[Resolved] Windows Media Player: "Illegal Operation Message"

15 more replies
Answer Match 86.1%

I am getting this error message when I try to download windows media player 10.

"Error creating process <C:\DOCUME~1\JASON1\LOCALS~1\TEMP\IXP000.TMP\setup_wm.exe /P:C:\Documents and Settings\jason #2\Desktop\mp10setup.exe>. Reason: The system cannot find the path specified."

I am running windows XP, and I already have media player 9. I have already downloaded the file onto my desktop. The error message pops up when I try to open the setup file. Any adivice would be greatly appreciated!!
 

A:Windows Media Player error message "Cannot find path specified"

12 more replies
Answer Match 85.68%

I can put a new movie in the dvd r/w in my laptop and it plays fine. I have an external dvd d/w that is older but works fine. It show up on my "device manager" and when I look at the properties check for updated drivers it says it is working and has the latest drivers. I can see content on cd's and dvd's that arn't new movies. What's up.

A:DVD won't play "Windows Media" update driver message

Go to external DVD manufacturer's support site for driver updates.

2 more replies
Answer Match 85.68%

Good morning to all those who are reading my post,

I am trying to help a friend with their computer problem. This laptop has only been used about 4 times in the last year. It is only used for a church youth presentation.

What I have is a Compaq Presario R4000, AMD Athlon 64, ATI Radeon Express, running Windows XP.

After pressing the power button to boot the computer the Compaq logo appears for a few seconds with the option at bottom F10 to enter setup. Then the following appears on screen and continually loops or repeats:

"Intel UNPI, PXE-2.0 (Build 082)
Copyright (c) 1997-2000 Intel Corp.

For Realtek RTL8139(x)/8130/810x PCI Fast Ethernet Controller V2.13(020326)
PXE-E61:Media Test Failure, Check Cable
PXE-MOF:Exiting PXE ROM"

Any help would be greatly appreciated,

Elizbeth
 

A:Compaq laptop not booting up, "media test failure" error message, I need help PLEASE.

16 more replies
Answer Match 85.68%

Please forgive my computer ignorance, i'm on my last leg here. I have a laptop (Compaq Armada M700) Microsoft XP Professional is the OS and it just wont boot AT ALL..

When I start I get the COMPAQ screen and it looks as if it's going to boot, but then I get this:

PXE-E61: Media Test Failure, Check Cable

I have tried Boot Disk, Restore Disk, the system just doesn't seem to want to read from the disk drive either... When I do that it gives me the "Non-System disk or disk error replace and strike any key when ready" message...

After I do that, it just flashes the laptop screen repeatedly and pops back up the SAME MESSAGE

Keep in mind, there are no disk installed at this time, and the only thing connected to the laptop is the AC Power Cord...

What can I do to get it to boot??

I'll even WIPE the HardDrive and reload the XP Software if need be, I just need to get around this "PXE-E61: Media Test Failure, Check Cable" message..

Any help would be GREATLY appreciated..
 

A:[SOLVED] "PXE-E61 Media Test Failure, Check Cable" Error Message

16 more replies
Answer Match 85.68%

I don't have a clue where to begin trying to fix this problem. Spybot doesn't seem to fix the problem. I keep getting random icons on my desktop and start menu called "online security guide" and "live saftey center". There are also many fake balloon warnings appearing and a window titled "Critical System Warning!" that wants me to download stuff. What process can I go through to clean my system. Any help would be great...thank you!

A:i need help - "online security guide" & "live safety center" icons!!

Please follow MicroBell's 5 Step process outlined here:

http://www.techsupportforum.com/secu...tml#post342651

After running through all the steps, please post the requested logs.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

1 more replies
Answer Match 85.68%

I'm having the same problem that a lot of people are having. These icons have showed up on my desktop and i keep getting pop ups telling me to download them because i have a virus. i would really applicate the help.
thanks!
John

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.


-- Last 5 Restore Point(s) --
91: 2007-11-17 16:39:03 UTC - RP554 - Deckard's System Scanner Restore Point
90: 2007-11-17 15:47:18 UTC - RP553 - System Checkpoint
89: 2007-11-16 15:05:33 UTC - RP552 - System Checkpoint
88: 2007-11-15 01:17:54 UTC - RP551 - Software Distribution Service 3.0
87: 2007-11-13 22:39:57 UTC - RP550 - Removed Banctec Service Agreement


-- First Restore Point --
1: 2007-11-12 23:17:11 UTC - RP464 - System Checkpoint


Backed up registry hives.
Performed disk cleanup.

Percentage of Memory in Use: 81% (more than 75%).
Total Physical Memory: 510 MiB (512 MiB recommended).
System Drive C: has 2.78 GiB (less than 15%) free.


-- HijackThis Clone ------------------------------------------------------------


Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2007-11-17 11:42:27
Platform: Windows XP Service Pack 2 (5.01.2600)
MSIE: Internet Explorer (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\SYSTEM32\SMSS.EXE
C:\WINDOWS\SYSTEM32\WINLOGON.EXE
C:\WINDOWS\SYSTEM32\SERVICES.EXE
C:\WINDOWS\SYSTEM32\LSASS.EXE
C:\... Read more

A:"online security guide" and "live safety center" deckard log here

Hello and Welcome. Please subscribe to this thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Subscribe.

Before beginning the fix, read this post completely. If there's anything that you do not understand, kindly ask your questions before proceeding. Ensure that there aren't any opened browsers when you are carrying out the procedures below. Save the following instructions in Notepad as this webpage would not be available when you're carrying out the fix.

It is IMPORTANT that you don't miss a step & perform everything in the correct order/sequence.

---------------------------------------------------------------------------------------------

Please download VundoFix.exe to your desktop. We'll use this later.

Download SDFix and save it to your Desktop.

Please download & install - ERUNT (This is a utility that'll replicate a copy of your Registry)
Start ERUNT, confirm the Welcome message.

Next, select the backup options:

System registry
Current User Registry
Other open user registry

Click "OK" and wait until the backup process is complete. (Note that depending on your system configuration this may take some time, and that the first bar is NOT a progress bar, just an indicator that the program is still running.)
# Note: To ensure proper operation of ERUNT, you should be logged in a... Read more

13 more replies
Answer Match 85.68%

Hello,

I'm running Windows XP SP 3. I have fake "Security Center Alert" popups and "Security Center" popups. A program called "Malware Defense" has also seemed to installed itself onto my computer. And I've just noticed porn icons appearing on my desktop. It's also disabled my Avira software.

GMER doesn't seem to run. I've clicked on it a couple of times but it doesn't seem to do anything. The DDS logs are attached/follows.

Thanks in advance!

DDS (Ver_09-12-01.01) - NTFSx86
Run by zili at 23:28:31.96 on Wed 01/06/2010
Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_15
Microsoft Windows XP Professional 5.1.2600.3.1252.61.1033.18.1022.493 [GMT 11:00]

AV: AntiVir Desktop *On-access scanning disabled* (Updated) {AD166499-45F9-482A-A743-FDD3350758C7}

============== Running Processes ===============

C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\WINDOWS\system32\svchost.exe -k WudfServiceGroup
svchost.exe
svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\stsystra.exe
C:\Program Files\CyberLink\PowerDVD DX\PDVDDXSrv.exe
C:\Program Files\Google\Gmail Notifier\gnotify.exe
C:\WINDOWS\system32\rundll32.exe
C:\Program Files\ATI Technologies\ATI.ACE\Core-Static\MOM.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WI... Read more

A:"Security Center Alert" popups, "Malware Defense" self install

Let's try this version of gmer.


Download GMER Rootkit Scanner from here to your desktop. Double click the exe file.
If it gives you a warning about rootkit activity and asks if you want to run scan...click on NO, then use the following settings for a more complete scan.



Click the image to enlarge it


In the right panel, you will see several boxes that have been checked. Ensure the following are unchecked Sections
IAT/EAT
Drives/Partition other than Systemdrive (typically C:\)
Show All (don't miss this one)

Then click the Scan button & wait for it to finish.
Once done click on the [Save..] button, and in the File name area, type in "Gmer.txt" or it will save as a .log file which cannot be uploaded to your post.
Save it where you can easily find it, such as your desktop, and attach it in reply.

**Caution**
Rootkit scans often produce false positives. Do NOT take any action on any "<--- ROOKIT" entries

4 more replies
Answer Match 85.26%

Powerdvd won’t play DVD
Windows Media player says there is no disc in Drive E.

I wondered if it was a hardware conflict and tried to use windows help hardware conflict troubleshooter but it did not seem to be working
Any ideas would be appreciated.

Pete
 

More replies
Answer Match 85.26%

I just began getting this error yesterday. What is the likelihood that another issue besides a failing hard drive is causing error? Secondly, I've already purchased a new hard drive as a precaution. What is the fastest/easiest way to backup/clone this drive?

A:"Windows detected a hard disk problem" error message

Hello,

Please open an elevated command prompt.
When you have the command promt open please enter the following command:
sfc /scannow and press enter.
After the scan is 100% and the scan did repair files please restart your computer.

Please re-open an elevated command prompt and enter the following command:
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt

The cbs.log file will be posted on the Desktop as the current user, named sfcdetails.txt. Please attach this file in your next post.

Note: You can also copy/paste the commands to make it easier.

1 more replies
Answer Match 85.26%

Hi,

Recently, an error message "Windows detected a hard disk problem" always pop ups in my monitor.

I have done "Error Checking" also " Defragmentation"...but that error message doesn't disappear.

What should I do?

Thanks a Lot.

A:Error message " Widows detected a hard disk problem"

That is not a most welcome message.

I would immediately backup the most important personal data and run the DOS version of Manufacturer's Diagnostic Utility. If it passes without any event reported, fine. But if it finds bad sectors and even if it repairs it, be wary. Not to be taken aback by any catastrophic failure that may occur unannounced, always backup all your personal data and also image your system regularly.

6 more replies
Answer Match 85.26%

Hi,

I've been having this problem for a few days now. Every time I start up I get this error message Windows - no disk Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9. Also when I open up task manager the window looks funny i.e. all the tabs disappear and I cannot close it. This thing seems to be slowing down my system.

Please advise. Thanks!

Raphael
 

A:Solved: "Windows - No Disk" error message [moved from XP; further malware help may be

8 more replies
Answer Match 84.84%

Hi there!
First of all thanks for the great toturial and the forum.

I tried to do the in-place upgrade from Windows 10 (build 1607) in order to "repair" my system (there are some quirks I want to get rid off) using a freshly created USB (as per description), but it fails with the message "make sure that there is enough disk space available in your PC" (rough translation from german; see attached screenshot) without any further information.

It then automatically cycles back to the question on how to install (i.e. with keeping data and apps or without) and then back into the above mentioned error message.


This is what I already tried or made sure of prerequisites needed:
I have made sure that there is definitely enough disk space available.My C: partition (where windows resides on) is 106 GB large and has currently over 58 GB of free space available.The system partition that is supposed to be 350 MB is still 350 MB (I read something about this potentially being reduced to 100 MB by other tools ...).I have deinstalled the Kaspersky anti virus tool (reinstalled it now after several tries with no success).I have disabled (i.e. fully decrypted) the disk encryption bitlocker on all disks.

My partitions (as seen from "Mini Tool Partition Wizard" and "Disk Manager"):
Do you have any ideas on what else could be wrong?
What intrigues me most is the fact that there is no further information in the error message on what or where is missing... Read more

A:In-Place Upgrade fails with message "not enough disk space"

Hi, Mark and welcome to Ten Forums.
Have you tried to mount the ISO in File Explore, instead if using an USB stick?
I just download the current ISO here: Windows 10 ISO , mount it in File Explorer and run the setup.exe.

22 more replies
Answer Match 84.84%

I installed a hard drive into my pc to access stored movies. The drive appears in explorer but when trying to open drive I get the message please insert disk media into storage device. Any tricks on how to get to the files.
Thanks
 

A:Can't access harddrive "insert disk message appears"

wostone said:





I installed a hard drive into my pc to access stored movies. The drive appears in explorer but when trying to open drive I get the message please insert disk media into storage device. Any tricks on how to get to the files.
ThanksClick to expand...

You might have auto-run worm on the system. Does it appear on C also? When last you scan your system for malware/spyware/adware/worms/viruses/trojans?
 

3 more replies
Answer Match 84.84%

I'm a computer lab assistant at Missouri State, and I always work on one of the two computers behind the desk. Both of the lab assistant computers have the same problem, but none of the others in the lab do.

I am on a computer running Windows XP Professional Version 2002 with SP3 installed. I only get the "no disk" Error Processing message when I start Firefox. Any suggestions?

(note: I have also attached a copy of this error message, if it will help)
 

A:"no disk" Error Processing Message upon starting Firefox

9 more replies
Answer Match 84.84%

I know this question has been asked before as I've read about it all over the Internet. In order to get rid of the 'Low Disk Space' message it says to go to the registry and locate HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer, type a new value, etc. The only problem is I don't have an Explorer key. It ends at Policies.

I've tried everything. I've tried creating the key myself, and I've tried inserting the value into the policies folder. Nothing has worked. Can anyone help?
Thank you
Brad
 

A:Solved: Can't get rid of "Low Disk Space" message on my recovery drive

I guess no one else is having this problem. Do you think this is a problem with HP?
Brad
 

3 more replies
Answer Match 84.84%

My laptop is getting really slow and i cant use browser as it gets slower and hangs a lot. What do i do ?
 

A:windows error message says " your hard disk is at risk"

16 more replies
Answer Match 84.84%

Been receiving the following error all the time. I am using Windows XP Home SP3. "Windows - No Disk 'Exception Processing Message c0000013Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c'"

I have viewed multiple forum histories and there seem to as many "fixes" as google ads.

I trust this group most. Any ideas how to get rid of this problem?

Thank you!

A:Windows - No Disk "Exception processing message c0000013"

Try this: http://www.techsupportforum.com/f10/...rs-160996.html

1 more replies
Answer Match 84.84%

I don't have a clue where to begin trying to fix this problem. I keep getting random icons on my desktop called "online security guide" and "live safety center". There are also many fake balloon warnings appearing and a window titled "Critical System Warning!" that wants me to download stuff. What process can I go through to clean my system. I didn't have this problem until I upgraded to Norton 2008. I am currently running IP tool antivirus and spyware, I also have ran Smitfraudfix, still getting pop ups like crazy. Also my IP tools is finding Trojan.Virtumonde. I use Quicken and it seems to have attacked it because I am no longer able to use it. Any help would be great...thank you!

A:"online security guide" and "live safety center"

Hi and welcome to TSF.

Apologies for any delay in replying, but we have been rather busy lately, and, of course, all our helpers are volunteers.

Since it has been a few days since you first posted, please follow these instructions if you still need assistance.

Download Deckard's System Scanner (DSS) to your Desktop . Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - minimised > extra.txt and maximised > main.txt.
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt back in this thread (do not attach it).
Please attach extra.txt to your post.


To attach a file to a new post, simplyClick the[Manage Attachments] button under Additional Options > Attach Files on the post composition page, and
copy and paste the following into the "Upload File from your Computer" box:C:\Deckard\System Scanner\extra.txt

Click Upload.

I will monitor this thread for your reply.

Thank you for your patience.

1 more replies
Answer Match 84.84%

Srry i know this post is a bit old but i recently just got this problem i can access the internet fine but i cant access my network settings, user settings, or see the the properties of my pc. i tried running your solution Brink but the scannow showed

"Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sfc /scannow
Windows Resource Protection could not start the repair service.
C:\Windows\system32>"

i then ran sfc /verifyonly but got the same answer.

i then ran findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >%userprofile%\Desktop\sfcdetails.txt. and the txt file came up blank.

idk wat to do rite now i am at my witts end.

A:Can't access "Network and Sharing Center" nor "User Accounts"

Hello Jayrrus, and welcome to Vista Forums.

I would recommend that you use Microsoft Standalone System Sweeper to scan your system with at boot to help make sure that your system is malware free first.

Afterwards, you might see if you may be able to do a system restore at boot using a restore point dated before you had these issues to see if that may be able to fix them.

Hope this helps,
Shawn

7 more replies
Answer Match 84.84%

The control panel opens fine. I can access all items in the control panel
except "Network and sharing center" and the "User accounts" (I can't access this sections via the taskbar either).

What happens when I open one of the two items is I get a popup saying the
following; WINDOWS EXPLORER HAS STOPPED WORKING.

I used to be able to access these items. And one day, I just coulodn't anymore...

Anyone knows how to solve this? Thanks.

I'm using Vista Ultimate x64

A:Can't access "Network and Sharing Center" nor "User Accounts"

Hello Newbie,

See if running a sfc /scannow can find and fix bad system files that may be responsible for this.

Hope this helps,
Shawn

16 more replies
Answer Match 84.84%

My son uses his computer on the net a lot and of course there is a virus out there waiting to serve its twisted master.

He got the wellknown "Live Safety Center" and "Online Security Guide" and it keeps comming back and hijacks his internet browser to redirect to the same page that promises peace and wellbeing for money ... of course.

Here is the DDS log:
"
Deckard's System Scanner v20071014.68
Run by Emil on 2007-11-10 20:43:53
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- HijackThis (run as Emil.exe) ------------------------------------------------

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 20:44:39, on 10-11-2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16544)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Programmer\Alwil Software\Avast4\aswUpdSv.exe
C:\Programmer\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Programmer\F?lles filer\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINDOWS\system32\agsdyely.exe
C:\Programmer\F?lles filer\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\Progra... Read more

A:Need to get rid of "Live Safety Center" and "Online Security Guide"

I did follow MicroBell's 5 Step process and the Panda scan said that no virus could be found. However, my Avast anti-virus warned me 5-6 times about files while I was running the Panda virus scanning. One of them was named "win.exe" and was in C:\temp\ but has now been deleted. Every time Avast issued a virus alert I chose the option to delete the file in question.

19 more replies
Answer Match 84.84%

Hi

I have Both Window XP (C:/) and Vista Premium (E:/) on my system.

Sometimes when I run vista i get a message say something like this: "Disk E:/ is corrupt, run chkdsk on the drive to resolve issues" After a reboot the chkdsk utily runs before it opens vista and fixes any issues, but i get the same problem a few days later.

Any Ideas?
Thanks
 

A:constant message "Disk E:/ is corrupt, run chkdsk on the drive to resolve issues"

I'd be testing both the RAM and the hard drive. Vista is really good at stressing out a system and may show issues when XP was fine, as was the case with XP versus 98.

To test the memory I'd use: http://www.memtest.org/

Then find out what brand of hard drive you have, probably will show you in Device Manager, and use the manufacturer's diagnostics to test it.

Another cause could be the drivers for the motherboard. Have you installed any chipset drivers? What motherboard do you have?
 

1 more replies
Answer Match 84.84%

Hi,

We are having a problem on a Windows XP Pro SP2 machine running Windows media player 10. It says "this version of media player is incompatible" when you try and open it. We have tried removing version 10, and putting on 9 but you get the same problem. This happens if you download the install file from the website or install WMP from the WindowsUpdate site. Has anyone come across this before, or got any ideas on how to get WMP to work?

Thanks a lot,
Daniel Murfitt
 

More replies
Answer Match 84.84%

Yesterday when I switch on my computer, it automatic diskcheck on my E disk. I have 3 HDD, which is C: (My main partition, installed Windows on this HDD), D: is for all my game files (Installed games) and E: is for all my music, movies, game installer, software etc.

So back to the point, when I switch on my computer, and get to the "Windows is Starting", and it stuck right there for about 5-10 minutes. Firstly, I have no patient so I restated the computer, and second or third time also have the same problem. So I choose to wait patiently, after 5-10 minutes, it have a black screen for about 1 to a few minutes, then it started the disk check on my E drive.

Once the process started ( I have total 234240 file record as shown on the disk check ) and continue to file record 800, it started to give me message stated "File record segment 800 is unreadable, File record segment 801 is unreadable" and so on, and sometimes it continue to go smoothly without the message, but not long or sooner it will appear again. Almost the whole process I get these message which worried me, and I wonder if my hard disk is failing badly and unable to recover.
It continues to finish the process and attempt to fix the bad sector. And after that it successfully log onto Windows, so I can use it normally again.

But I notice my E: HDD cannot access and the "My Computer" screen is loading very slow, and sometimes goes unrespond. One thing very weird is that after I few hours ... Read more

A:Hard disk is failing? Error message"File record segment is unreadable"

The "File record segment xxx is unreadable" error is an indication of failing hard drive. You should backup the data from this drive before it's too late.

Next, run some diagnostic testing on the failing hard drive; most HDD manufacturers have the diagnostic software available from their website. Software from Seagate will work with most brand.

If this drive would be mine, I'd just get a new one, the drive certainly will not get better...

9 more replies
Answer Match 84.84%

Hi, i've came here before to know how to do a clean install of windows 7 but now i have an issue, when i booted my computer up and logged on i got a message saying "Disk faliure back up immadiatley" why is this? I dont know if i posted this on the right thread but someone please help me. Thanks

A:Reinstalled windows 7, now i've gotten a "disk faliure" message.

why did you do the same post twice but in different sections o_O???? This isn't going to get your problem resolved any faster......

4 more replies
Answer Match 84.84%

I recently burned a couple of CDS (filled with videos and mp3s) and MADE SURE that they worked properly and were burned correctly BEFORE I deleted the videos and mp3s from my computer. Well, I burned about 5 cds. I was checking over some of the CDs and 2 of the burned CDs dont want to work. I get the following error:

"Windows cannot read from this disk. The disk might be corrupted, or it could be using a format that is not compatible with Windows"
Why am I gettin this? Im POSITIVE that the disk was burned correctly but now all of a sudden Im gettin this error. I got Windows XP SP2, Gateway Computer.
 

A:Error Message: "Windows Cannot Read From This Disk."

Are they in perfect condition?
 

2 more replies
Answer Match 84.84%

Hello,
I'm trying to install Windows 7 64bit to HP dc7800 Ultra slim desktop PC from USB flash drive (since PC hasn't got CD/DVD drive). At the partition selection step I get message "Windows cannot copy files to this disk".
I've already googled a lot and read this forum topics, but still can't overcome this issue.

I've tried the following:
format HDD and create partition table with DISKPART via win7 disk command promt,
format HDD and create partition table with GParted (creating to primary patition: ~50 GB NTFS '"WIN7" and ~100 GB NTFS "DATA",
wipe all data from HDD writing random data,
create bootable USB flash with different tools (Windows 7 USB/DVD Download tool, Novicorp WinToFlash),
memtest86+ both operating memory modules (2 x 2GB) for 6 passes,
leave only one module connected to motherboard (with each),
reset CMOS setting in 3 ways (via BIOS, removing power cable and CMOS battery, pushing CLR_CMOS button on motherboard),
set HDD as the first boot device
but nothing helped.

I've searched in BIOS for different HDD emulation modes (AHCI, IDE), but the only present setting present:
Storage -> Device Configuration -> Hard Disk (SATA0):
Emulation type: Hard Disk, None,
Multisector Transfers: 8, 16, Disabled,
Translation Mode: Off, Automatic, Bit Shift, LBA Assisted, User.

What can I do? Your help is appreciated.

UPD:
Tried removing USB flash key and refresh the partition list in partition selection menu. Didn't help.
... Read more

A:Yet another "Windows cannot copy files to this disk" message

Work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums

9 more replies
Answer Match 84.84%

I get this error message whenever I try to run iTunes or load a music CD. I cannot get it to disappear, and end up having to reboot. I have run A-Spyware & A-V software, and have cleaned my register.

I saw a solution to this in forum threads, which referred to using "Hijack This". But the solution required someone else to look at my log file, and then suggest specific actions.

Can anyone help me through this please?

Many thanks.
 

A:Solved: Error Message "Windows - No Disk"

13 more replies
Answer Match 84.84%

After formatting I keep getting error message "Invalid system disk
Replace the disk, and then press any key"

I use this drive for an old PC that was running Xubuntu but now want to reinstall Win 7 after I went complete Linux on my main machine. I know it works. Every article online says the drive is either dead, infected, or whatever. I'm also booting from a flash drive, another thing I read is it's trying to boot from CD instead of USB and change boot order to fix, obviously that's what I'm already doing.

It's formatted fat32 with MBR. Any ideas what to do?

Thank you.
 

More replies
Answer Match 84.84%

I keep getting the "Windows - No disk" message when running Spybot or Adaware. I went to HijackThis and did a system scan and got a log file but I need someone knowledgeable to look at it and tell me what to check and fix after I run a "system scan only". I ran Spybot in Safe Mode and didn't get the pop-up. Any help will be much appreciated. Here is the logfile:

Logfile of HijackThis v1.99.1
Scan saved at 2:53:26 AM, on 3/18/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
H:\WINDOWS\System32\smss.exe
H:\WINDOWS\system32\winlogon.exe
H:\WINDOWS\system32\services.exe
H:\WINDOWS\system32\lsass.exe
H:\WINDOWS\system32\svchost.exe
H:\WINDOWS\System32\svchost.exe
H:\WINDOWS\system32\spoolsv.exe
H:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
H:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
H:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
H:\WINDOWS\Explorer.EXE
H:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
H:\Program Files\Java\jre1.5.0_06\bin\jusched.exe
H:\Program Files\Common Files\Real\Update_OB\realsched.exe
H:\Program Files\iTunes\iTunesHelper.exe
H:\Program Files\QuickTime\qttask.exe
H:\WINDOWS\system32\RunDll32.exe
H:\Program Files\OpenOffice.org 2.0\program\soffice.exe
H:\Program Files\iPod\bin\iPodService.exe
H:\Program Files\OpenOffice.org 2.0\program\soffice.BIN
H:\Program Files\Mozilla Firefox\firefox.exe
H:\Documents and Settings\Charles Eldredge\Desktop\HijackThis.exe

R1 - HKCU\Software\Microsoft\In... Read more

More replies
Answer Match 84.84%

Hi, i've came here before to know how to do a clean install of windows 7 but now i have an issue, when i booted my computer up and logged on i got a message saying "Disk faliure back up immadiatley" why is this? I dont know if i posted this on the right thread but someone please help me. Thanks

A:Reinstalled windows 7, now i've gotten a "disk faliure" message.

  
Quote: Originally Posted by LaurenTrumpe


Hi, i've came here before to know how to do a clean install of windows 7 but now i have an issue, when i booted my computer up and logged on i got a message saying "Disk faliure back up immadiatley" why is this? I dont know if i posted this on the right thread but someone please help me. Thanks



You would do well to follow the instructions for it sounds like you have a HD on the verge of failing.

Probably just co-incidental that you just did a clean install.

After you back up run a chkdsk to check the HD status.

A- CHKDSK /R /F:





Quote:
Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.

Do this for each hard drive on your system.

When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.

Then reboot and let the test run.

It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.

See "CHKDSK LogFile" below in order to check the results of the test.



B- Elevated Command Prompt:





Quote:
Go to Start and type in "cmd.exe" (without the quotes)

At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"



C-CHKDSK LogFile:





Quote:
Go to Start and type in "eventvwr.msc" (without the quotes) and... Read more

9 more replies
Answer Match 84.84%

First of all, i just want to let everyone know that i am not very good with computers so, please bare with me.

Here is my problem, my wife was trying to download pics from her memory card of her camera (sd card) to my computer so that she could burn the pics to a cd. My computer (Gateway GT5016H) has a slot to insert the memory card into the tower of the computer. She inserted the card, retrieved the pics and proceeded to burn them to a cd. When she was done, she shut down the computer.
Now evertime i start the compuer i get an error message pop up "windows-no disk" "there is no disk in drive. Please insert disk into drive." I also must click cancel multiple time to get rid of the error message. Gateway tech's could not help resolve the problem and told me to contact the manufacture of the sd card because they believe there is a compatability issue. I have windows XP if you need to know.

Can anyone help me.
 

A:Solved: Error message "windows-no disk" Please help me!

16 more replies
Answer Match 84.84%

I receive daily a "Low Disk Space" error message which is incorrect and in my estimation fradulent. It goes on to give an alternative to rectify this situation by offering to "Speed up your computer and remove all viruses that are on your computer." Of course all of this is for a price. If you opt in and then change your mind before you totally commit they offer the same package for half price. I refuse to be "sucked in" by this fraudulent company.

I have gone to the internet to try and find out how I may get rid of this enemy. I have used Malwarebytes, Microsoft Security Essentials and Microsofts Security fix program all to no avail. I am at my 'wits end' trying to rid my computer of this plague. This is the url that the message comes through as. I cannot find out any source that will identify its origin: http://static.salesresourcepartners.com/g/?z=1&ilmernzkvtaztu=002618B38EDC0810&pu=cGlja3VwaG9ja2V5LmNvbQ==&s=iexplore&nm=ilmernzkvtaztu&t=aHR0cDovL3d3dy5waWNrdXBob2NrZXkuY29tL2ZvcnVtL3RvcGljLmFzcD9UT1BJQ19JRD0yODIzNw==&r=1

I need help.

Thanks,

Doug. Bell
 

A:Fake "Low Disk Space" error message

16 more replies
Answer Match 84.84%

Hi, I'm having some trouble in the GIMP, especially when opening or saving files. Going to the C: drive goes fine, but when I go to a following directory, I get the "No Disk" error message, telling me to insert a disk into "the" drive. Whichever that may be.

If that were all, it wouldn't have been a great deal. But whichever button I press in the error message, it just pops up again. And again, and again, and again... This is seriously bad for one's nerves. Of course, I tried to click very rapidly, and eventually it does stop, if you're lucky enough not to click once too many. Because chances are you click on the save or load dialog, then the message pops up, and you can start all over again! I tell you, it's only a matter of time before I have a mental breakdown.

I was actually uncertain as of in which forum to post, as I suspect this could be a Windows problem as well. You see, whenever I stick a USB stick into my computer, the drive letter assigned to it isn't the next one unused. Instead, it skips one. So perhaps my computer thinks there's one more drive - one without a disk in it - while there really isn't. That's just an idea though.

I'm using Windows XP SP2, GIMP 2.2.10 and GTK 2.8.9. Both are the latest version, and there is no mention of a "No Disk" message in GIMP's Bugzilla.

Any help would be greatly appreciated, of course!
 

A:Solved: "No Disk" error message in GIMP

bump..
 

3 more replies
Answer Match 84.84%

This message comes up on starting Windows XP and has to be clicked on 8 times to go away.

Using HijackThis 1.99 I did a scan and received this report:

Logfile of HijackThis v1.99.1
Scan saved at 7:42:27 AM, on 3/23/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\wltrysvc.exe
C:\Program Files\Common Files\Softwin\BitDefender Communicator\xcommsvr.exe
C:\Program Files\Common Files\Softwin\BitDefender Scan Server\bdss.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\AdwareDelete\adwaredelete.exe
C:\Program Files\Java\jre1.5.0_02\bin\jusched.exe
C:\Program Files\3B Software\Windows Registry Repair Pro\RegistryRepairPro.exe
C:\Program Files\Java\jre1.5.0_02\bin\jucheck.exe
C:\Program Files\AdwareDelete\adwaredelete.exe
C:\Program Files\Adobe\Acrobat 5.0\Distillr\AcroTray.exe
C:\Program Files\eFax Messenger 3.5\J2GDllCmd.exe
C:\Palm\HOTSYNC.EXE
C:\PROGRA~1\INCRED~1\bin\IMApp.exe
C:\Program Files\Softwin\BitDefender8\vsserv.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\System32\bcmwltry.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\DOCUME~1\Brad\LOCALS~1\Temp\Temporary Directory 1 for hijackthis[1].zip\HijackThis.exe
C:\Program Fil... Read more

More replies
Answer Match 84.42%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Answer Match 84%

ok, heres the deal, i have a very small homemade recovery partition, which is literally just big enough to hold the recovery files, unfortunately, windows keeps telling me every 3-4 minutes "HD Z:\ is nearly full please delete some files to make space" its not an issue as such, but its SUPPOSED to be nearly full and the messages are annoying, any way to turn them off?

A:HDD "nearly full" message

Type regedit in to the start menu search box. Hit enter.

Navigate to

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\

Create a new DWORD by typing NoLowDiskSpaceChecks

Set its value to 1.

Reboot and enjoy.

4 more replies
Answer Match 84%

I've tried frequently documented solution regarding FsDepends where
changing the start reg key from a value of 3 to 0.... doesn't work as this is a common symptom to a different problem.

When using partdisk or the disk management gui I get the error message: "A virtual disk support provider for the specified file was not found"
eg partdisk select vdisk file=c:\my.vdh
There are some statements that some Intel Management Control Software might be knobbing this feature... does anybody know what this installation is doing so that the process can be reversed?
Any other suggestions?
Cheers
Simon

More replies
Answer Match 84%

hello,

I have vista home premium 64 with media center. don't have any desire to hook up the computer to a tV or surround sound system, so is there really any reason to open up and install media center service?

I burn cds, do some computer studio recording, sometimes plug a phonograph (remember those?) or a cassette into the computer to record.

is there anything in media center that makes those experiences better?

when i record off of vinyl i have to set the recording level down to practically zero to record or otherwise the signal is too hot using my usb turntable. it's really almost zero plus a tick or nothing at all. will media center do anything for this?

thanks,

Msongs

A:do I "need" media center?

Considering all the questions you have, my best advice is to open the program and play with it yourself. Sorry if this isn't what you were looking for but its the best answer I can give.

Good luck

4 more replies
Answer Match 84%

Hi,

I'm having problems with starting my pc.

Every time I try to boot it I keep getting the error "wuauctl.exe - No disk" that states:
"There Is No Disk in the Drive. Please Insert a Disk into Drive \Device\harddisk\Dr3"

And when I try to close the error message the computer reboots itself.

Any ideas?
 

A:"No Disk" Message on Windows XP [can't boot]

Does Windows start at all? Or is the message during the startup process and you can't get any further?
 

3 more replies
Answer Match 84%

I get a 'no disk' message from my cd players. Windows recognizes they are there, and I have changed cables, drivers and rebooted from install and uninstall but nothing seems to be getting windows to recognize that there is a disk in the cd player.
I've run out of ideas...
Thanks,
Walter
 

A:false "please insert disk" message

Try this
Left click My computer right click on the cd drive and left click properties, click autoplay and change to suit your needs
 

1 more replies
Answer Match 84%

im not completely sure if this has to do with windows but i keep having an error message pop up randomly and i have no idea what it is talking about it says:

"Exception Processing Message 0xc0000013 Parameters 0x75EF92A0 0x00000004 0x75EF92A0 0x75EF92A0"

and it only lets me cancel, try again, or continue, but whatever i do it usually pops up a few more times. can some1 please tell me what the hell it means or just how to fix it?

A:"Windows- No Disk" error message???

hi and welcome maybe this will be useful http://forums.techguy.org/business-a...essing-10.html a lot of options

1 more replies
Answer Match 84%

My computer persistantly displays this error message saying "Windows - No Disk: There is no disk in the drive. Please insert a disk into drive." When I look at the My Computer screen It shows my floppy drive, my C drive, the unknown Removable Disk Drive (D:), CD drives E and F, my other internal drive (G:), my external (H:), the second partition on my internal drive (I:), a DVD drive (J:), and then finally the second unknown Removable Disk Drive (K:). I have no idea what these Removable disk drives are or how they got here but I think they are causing the problem. Windows thinks there is a disk mounted but there isnt. If it helps the applications I was using at the time of when the incident first began was Azureus, my DVD drive, Divx Player, iTunes, and maybe some more random stuff. This error message pops up whenever I open multiple programs such as iTunes and Azureus. I could REALLY use some help with this as it is starting to become very annoying!

A:Keep getting error message saying "There is no disk in the drive"

right click on my computer then manage. click on disk management and see what it specifies K:\ as. you can right click and goto properties to get a list of drives attached and maybe it'll give you more specs on this removable drive.

is is possible you installed some software from a removable disk (like a usb key) and the software you are running is looking for the source media? it's possible this new drive has nothing to do with the windows error

6 more replies
Answer Match 84%

has anyone ever received this message??

"windows no disk"

how did you fix it??

A:"windows no disk" error message.

Hard drive error.,more than likely. Go to hdds makers website,
download the diagnostic utility and run it.

5 more replies
Answer Match 84%

At startup continually suffer from Windows-No Disk window. Takes 3 cancels to get past. How can I fix this? Read other posts on this and it looked like this may be helpful to see:

Logfile of HijackThis v1.99.1
Scan saved at 1:36:42 PM, on 1/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
F:\WINDOWS\System32\smss.exe
F:\WINDOWS\system32\winlogon.exe
F:\WINDOWS\system32\services.exe
F:\WINDOWS\system32\lsass.exe
F:\WINDOWS\System32\Ati2evxx.exe
F:\WINDOWS\system32\svchost.exe
F:\WINDOWS\System32\svchost.exe
F:\WINDOWS\system32\spoolsv.exe
F:\WINDOWS\system32\Ati2evxx.exe
F:\WINDOWS\Explorer.EXE
F:\Program Files\QuickTime\qttask.exe
F:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
F:\WINDOWS\system32\LVCOMSX.EXE
F:\Program Files\Common Files\Real\Update_OB\realsched.exe
F:\Program Files\Microsoft IntelliPoint\point32.exe
F:\Program Files\Microsoft AntiSpyware\gcasServ.exe
F:\Program Files\Viewpoint\Viewpoint Manager\ViewMgr.exe
F:\WINDOWS\system32\ctfmon.exe
F:\Program Files\Microsoft ActiveSync\WCESCOMM.EXE
F:\Program Files\Hewlett-Packard\AiO\hp officejet k series\Bin\hpoorn07.exe
F:\PROGRA~1\HEWLET~1\AiO\Shared\Bin\hpoevm07.exe
F:\WINDOWS\system32\hpoipm07.exe
F:\Program Files\Microsoft AntiSpyware\gcasDtServ.exe
F:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
F:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
F:\Program Files\Cisco Systems\VPN Client\cvpnd.exe
F:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
F:\... Read more

A:"Windows - No disk" message at startup

This doesn't look copacetic since no file is listed, I'd check and "fix" it:

O4 - HKLM\..\Run: [Subst] subst C: F:\

Other than that the scanlog is ok.

When did this problem begin? If recent, you might just want to try a System Restore.

The problem is occasionally due to the system trying to access some removable media which has no disk in the drive, such as a zip drive.

It can also be due to drive letters being assigned to drives that no longer exist. What exactly is on your "c:" drive?

http://support.microsoft.com/default.aspx?scid=kb;en-us;330137
 

3 more replies
Answer Match 84%

I can not open my photoshop prom in Windows XP professional, it says No Disk and the exact error message is Parameters 75b6bfc 4 75b6b7c 75b6b7c ? Anyone know how to fix this ? Thank you

A:Windows "No Disk " error message

No need to Post twice, we heard you.
In Photoshop go to File\Preferences\Memory & Image Cache, and set the value of used by Photoshop to 50%. Restart Photoshop. Or if you have another drive, set the Scratch Disk to be on another drive.

1 more replies
Answer Match 84%

This problem is making me crazy:

I am trying to copy some files to a CD Disk, so that I can open them on a different computer. I have put a disk in the drive, highlighted the file, clicked on "send to", and I get the message: "Please insert a disk into Drive E (or F, whichever I happen to try it with)".

The drives won't recognize that there is a blank CD. If I put in an audio CD or a DVD, it recognizes it, and plays it fine. It's just the blank ones that are giving me a problem. I have tried several different brands of CD . . . same result . . . "Please insert a disk into drive".

Does ANYONE have a remedy for this problem, or a suggestion? Any help will be appreciated.

FYI : My computer is a Dell 8300, running Windows XP. My drives are an NEC CD-RW and a Samsung DVD-ROM.
 

A:Can't Copy to CD . . "No Disk In Drive" Message

Hello.
Stupid question.
Are you putting the blank CD in the NEC device?

Open "my computer".
RIGHT click the NEC drive
Left click "properties"
Left click the "recording" tab.
Is the box "enable recording on this drive" checked?

When did the problem begin?
Can you associate the onset of the problem to the addition or removal of hardware or software, to include an update to Windows or your antivirus program? Have you run a registry cleaner recently? I am NOT suggesting that you run a reg cleaner.

Have you EVER been able to burn files on this computer, using this NEC drive.

Basically, to be successful, you need the correct combination of burner / device, optical disk, software.
Are you using CD - R disks? Which brand & model?

Which optical disk are you using?

Which disk burning software is on your computer? Which disk burning software has EVER been installed on your computer?

How to troubleshoot CD playing problems.
http://support.microsoft.com/kb/321641
I realize that your problem is burning, but many of the concepts are the same.

RF123
 

1 more replies
Answer Match 84%

Hi.

I am using Windows XP SP2. I just uninstalled Norton AntiVirus 2004. The uninstall would not complete, so I downloaded and ran the SymNRT program (from Symantec) to remove the program. All went well. The program advised that all Norton products had been successfully removed. Upon reboot, after I click my icon on the XP "Welcome" screen and type in my password, windows loads the desktop as normal. A few seconds later howeverm I get the following message:
"Windows - no disk Please insert disk in drive"
Clicking 'cancel' removes the message and everything appears to be fine. I did a bit of research and have already tried the following to no avail:

Clearing recent files list from QuickTime
Starting the PC in Safe Mode to see if the error comes up (it does).
Disabling SpySweeper from running at startup
Disabling ZoneAlarm from running at startup

I still get the error. I since have re-enabled ZoneAlarm and SpySweeper. I have also installed NOD32 AntiVirus. The error remains constant. It happens each time I reboot.

I notice that the log file below refers to L:\Adobe\Photoshop Elements in a couple of spots. I recently did something that caused drive letters to change. I used Drive Mapper in Partition Magic to help fix any problems and all appears to be well. My old "L:" is now "G:". I'm not sure if this is relevant, because this happened a few weeks ago and the error I'm posting about only started today. I did figure... Read more

A:"Windows - no disk" message at startup

9 more replies
Answer Match 84%

I can not open my photoshop program in Windows XP professional, it says No Disk and the exact error message is Parameters 75b6bfc 4 75b6b7c 75b6b7c ? Anyone know how to fix this ? Thank you

A:Windows "No Disk " error message

Hi do you have any p2p software on the machine,what av do you have

1 more replies