Tech Problem Aggregator

Problem with my cmputer, just dont work/turn on....help....

Q: Problem with my cmputer, just dont work/turn on....help....

ok, pretty much, the computers on everyday, my brother goes onto it and found everything freeze, so he turned it off and then turned it on. The power button lights up when u turn it on, well it doesnt, but u here the fans go, the harddrive run, cdrom drive etc. But the monitor doesnt come on, it just says no signal. So now the computer doesnt turn on or work.

I left it off, and i turned it on witht he harddrive disconnected, and it did turn on to the black startup screen, turned it off, turned it on with the harddrive connected, no signal again, nothing working, just fans moving etc. Been like that still.


My question is this, is this heat related problems or a powersupply problem? Also is this a motherboard or a cpu problem?

A: Problem with my cmputer, just dont work/turn on....help....

6 more replies
Answer Match 64.26%

HI, my friend who has Vista Basic 32 Bit on her Dell Desktop downloaded an old Roxio software now her computer wont boot up. Instead it go's straight into the bio. It wont set up or nothing even when it asks you to push F2 or f12 for Bio.

Can anyone help me fix this!?

Thanks so much

A:My friend downoaded an old Roxio and now cmputer wont work help!

Welcome
Press F8 on boot, which gets you to safe mode. In safe mode go to system restore and go back to a time prior to the install.
System Restore - How to

7 more replies
Answer Match 64.26%

HI, my friend who has Vista Basic 32 Bit on her Dell Desktop downloaded an old Roxio software now her computer, now her computer wont boot up. Instead it go's straight into the bio. It wont set up or nothing even when it asks you to push F2 or f12 for Bio.

Can anyone help me fix this!?

Thanks so much
 

A:HJT (My friend downoaded an old Roxio and now cmputer wont work, help!)

16 more replies
Answer Match 64.26%

help.

when i logged on to my windows account:
vista reverted to classic theme;
i cant access my documents, My computer, the control panel. i cant go on windows explorer or access any files whatsoever;
there was an error message that said: 'catalyst control center: host application has stopped working.' ;
also there was an error message that 'C:\Windows\System32\config\systemprofile\Desktop refers to a location that is unavailable' (or similar);
google chrome doesnt work: google chrome cannot read or write in its data directory.;
opera doesnt work:" Startup Error:Opera has failed to access or upgrade your profile. This may have occurred because your computer has insufficient resources available or because some files are locked by other applications. You may have to restart your computer before Opera will start again.";
the same thing happens with many other programs.;
i cant seem to do anything that requires admin privileges (i am on an admin account but not the root admin): for example when i click show processes for all users(in the task manager) it doesnt do anything.;
the computer is about slower than usual(logging on took a long time, start menu freezes up a bit, search doesn't work);
to me it seems like a number of files and folders where moved or deleted (like in program files or something).
could this be a virus, or just a buggy or incompatible software(I just installed Miro)?
please help.

thanks

A:classic theme; programs dont work; ccc & desktop dont work; slower than usual; etc.

Can you boot your computer in safe mode and access your documents, computer, and control panel?

1 more replies
Answer Match 59.64%

when i try to turn off my computer or reboot , my computer do nothing , what i do its i turn off with the Windows Task Manager some programe in the one by one and each time i ask to turn off my windows xp. and when i turn off the one called xpwin.exe . the windows turn off corectly. now i try to find whats is this programe do it . now Riskyone101 ask mee to do some programe and i give you the result.

thanks for your help. and have a nice week end.




DDS (Ver_09-05-14.01) - NTFSx86
Run by marc at 9:27:00,61 on 2009-06-20
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professionnel 5.1.2600.3.1252.33.1036.18.1023.281 [GMT -4:00]

AV: Symantec AntiVirus Corporate Edition *On-access scanning enabled* (Updated) {FB06448E-52B8-493A-90F3-E43226D3305C}

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\WINDOWS\system32\svchost.exe -k WudfServiceGroup
svchost.exe
svchost.exe
C:\Program Files\Fichiers communs\Symantec Shared\ccSetMgr.exe
C:\Program Files\Fichiers communs\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
svchost.exe
C:\Program Files\Fichiers communs\ArcSoft\Connection Service\Bin\ACService.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Fichiers communs\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\Pho... Read more

A:the computer dont turn off or dont reboot

j'ai fais un scan avec BitDefender Online Scanner - Rapport virus en temps réel



Généré à: Mon, Jun 22, 2009 - 11:39:21


--------------------------------------------------------------------------------





Info d'analyse



Fichiers scannés
88522

Infectés Fichiers
28








Virus Détectés



Adware.Webhancer.A
2

Application.Webhancer.AE
2

Application.Adware.NewDotNet.B.Dropper
2

Adware.Webhancer.C
2

Adware.Whenu.BSR
3

MemScan:Trojan.Generic.967157
4

Spyware.Webhancer.U
2

Trojan.Generic.1142005
1

Spyware.Webhancer.F
2

MemScan:Trojan.Generic.1427433
1

Trojan.Generic.1747387
2

Gen:Trojan.Heur.GM.006040E022
1

Adware.Generic.66017
2

Adware.Generic.60122
2

3 more replies
Answer Match 59.64%

Hi I have samsung galaxy s6 edge been using viber for nearly 2 years and now i dont get the txt and missed call when my fones screen gets off.can anyone help pliiiiiz

A:I have problem with viber network.i dont get txt and missed call when fone screen turn off

Hi and welcome to WindowsCentral.
The Samsung Galaxy S6 is an Android device, and we're about Windows devices here.
However, we have a sister site AndroidCentral with many friendly and helpful Android users. Please check out AndroidCentral and ask them. http://forums.androidcentral.com/ask-question/
You'll find more help at AndroidCentral.

1 more replies
Answer Match 57.96%

I get the following error when starting some programs - the instruction at "0x008c19ff" referenced memory at "0x00000000". The memory could not be "read". I got this for adobe acrobat Pro 8. i tried to reinstall it. That caused more problems (given below) but this problem for adobe acrobat was solved. I have this for problem for Spiderman 3 game, though.While installing Adobe acrobat i got the following errors. giving one as example. (i have attached the other errors messages from the installation logs separately).Error 1406.Could not write value ThreadingModel to key \Software\Classes\CLSID\{06849E9F-C8D7-4D59-B87D-784B7D6BE0B3}\InprocServer32. System error . Verify that you have sufficient access to that key, or contact your support personnel.i had to ignore them and complete the install. I checked google and i got the information that i should go to registry editor and then change the properties so that my user id is added to the list of users who have access to the registry keys. Though i have admin rights to my computer, I am not able to do this for all the entries. Example - 5F226421-415D-408D-9A09-0DCD94E25B48 I am not able to change the properties. I do not know the reason.Pls help.2. My system is also slow. I am posting my Hijackthis log followed by Autoruns log.3. Cannot see any USB devices unless i go and explicitly map them again using DISKPART everytime.Logfile of HijackThis v1.99.1Scan saved at 7:44:54 AM... Read more

A:Memory Culd Nt Be Read Problem And Slw Cmputer

Hello Beautyspot and welcome to BleepingComputer!My name is Johannes and I will be dealing with your log today.Please note that comments are made in green, links are in red and important things are outlined by using the blue color.Please also take note of the following:I will start working on your Malware issues, this may or may not, solve other issues you have with your machine.The fixes are specific to your problem and should only be used for this issue on this machineThe process is not instant. Please continue to review my answers until I tell you your machine is clear. Absence of symptoms does not mean that everything is clear.If you don't know, stop and ask! Don't keep going on.Please reply to this thread. Do not start a new topic.Please give me some time to look over your log and I will get back to you as soon as possible.Thanks,Johannes

8 more replies
Answer Match 57.96%

i dont know what do to and how to update the drivers i dont have a cd player on laptop so how would i fix this problem
 

A:My dell latitude speakers or head phone jack dont work help(i dont have cd player)

i searched for drivers on dell and it says there is 1 crystal something audio driver thats avalible for my laptop can i download it as my current thing is a sigmatel driver should update it
 

2 more replies
Answer Match 57.96%

some websites don't work in my browsers, them websites are the ones that I visit everyday. I have tried everything but it still doesn't work, help me please!
 

A:i have the same problem, some websites dont work in my browser!

Hello ilkturk, we're going to need a bit more information than that.

What websites are you trying to visit?

When did this first start?

Did you make any hardware or software changes before this began?
 

1 more replies
Answer Match 57.96%

Antivírus dont enable...
 
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64 
Internet Explorer: 10.0.9200.16537
Run by Anderson at 23:30:53 on 2013-05-12
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.55.1046.18.3998.2384 [GMT -3:00]
.
AV: F-Secure Client Security 9.01 *Disabled/Updated* {15414183-282E-D62C-CA37-EF24860A2F17}
SP: F-Secure Client Security 9.01 *Disabled/Updated* {AE20A067-0E14-D9A2-F087-D456FD8D65AA}
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
FW: F-Secure Client Security 9.01 *Disabled* {2D7AC0A6-6241-D774-E168-461178D9686C}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\PROGRA~2\GbPlugin\GbpSv.exe
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\system32\WLANExt.exe
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Windows\system32\taskeng.exe
C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\armsvc.exe
C:\Program Files (x86)\Bluetooth Suite\adminservice.exe
C:\ProgramData\BrowserProtect\2.5.1005.80\{c16c1ccb-7046-4e5c-a2f3-533ad2fec8e8}\BrowserProtect.exe
C:\Program Files (x86)\F-Secure\Anti-Virus\fsgk32st.exe
C:\W... Read more

A:Rootkit problem, antivÝrus dont work

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===Third party programs if not up to date can be the cause of infiltration an infection.Please run this security check for my review.Download Security Check by screen317 from here.Save it to your Desktop.Double click SecurityCheck.exe and follow the onscreen instructions inside of the black box.A Notepad document should open automatically called checkup.txt; please post the contents of that document.===Search and delete the AdWare, PUP (Potentially Unwanted Program) installed on your computer.Please download AdwCleaner by Xplode onto your Desktop.Close all open programs and internet browsers.Double click on AdwCleaner.exe to run the tool.Click on Delete tab follow the prompts.A log file will automatically open after the scan has finished.Please post the content of that log file with your next answer.You can find the log file at C:\AdwCleaner[Rn].txt (n is a number).=== Please downloadJunkware Removal Tool to your Desktop.Please close your security software to avoid potential conflicts.Run the tool by double-clicking it. If you are using Windows Vista or 7, right-mouse click it and select Run as administrator.The tool will open and start scanning your system.Please be patient as this can take a while to complete, depending on your system's specifications.On completion, a log (J... Read more

3 more replies
Answer Match 57.54%

ComboFix 11-07-22.02 - escritorio 22/07/2011 16:45:36.2.1 - x86
Microsoft Windows XP Professional 5.1.2600.3.1252.55.1046.18.3319.2810 [GMT -3:00]
Executando de: c:\documents and settings\escritorio\Desktop\download\ComboFix.exe
.
ATEN?AO - ESTA MAQUINA NAO TEM O CONSOLE DE RECUPERA??O INSTALADO !!
.
.
(((((((((((((((( Arquivos/Ficheiros criados de 2011-06-22 to 2011-07-22 ))))))))))))))))))))))))))))
.
.
2011-07-22 13:17 . 2011-07-22 13:17 -------- d-sh--w- c:\documents and settings\LocalService\IETldCache
2011-07-22 12:20 . 2011-07-22 12:20 -------- d-sh--w- c:\documents and settings\NetworkService\IETldCache
2011-07-22 12:14 . 2011-07-22 12:15 -------- dc-h--w- c:\windows\ie8
2011-07-21 20:41 . 2009-07-23 03:13 306 ----a-w- c:\windows\myClean.bat
2011-07-21 20:22 . 2011-07-21 20:22 -------- d-----w- c:\documents and settings\escritorio\Dados de aplicativos\ElevatedDiagnostics
2011-07-21 19:56 . 2011-07-21 19:56 -------- d-----w- c:\arquivos de programas\Microsoft Silverlight
2011-07-21 13:04 . 2010-09-18 06:53 953856 -c----w- c:\windows\system32\dllcache\mfc40u.dll
2011-07-21 12:59 . 2011-07-21 12:59 -------- d-----w- c:\windows\system32\NtmsData
2011-07-21 12:54 . 2010-10-18 11:10 7680 -c----w- c:\windows\system32\dllcache\iecompat.dll
2011-07-21 12:49 . 2011-07-21 12:49 472808 ----a-w- c:\windows... Read more

A:iexplorer dont work with javascript and mcafee dont install

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:***************************************************First, I need to know if you still need help! To tell me this, please click on http://www.bleepingcomputer.com/logreply/410725 and follow the instructions there. If you no longer need help, this is all you need to do. If you do need help please continue below.***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of this page). In that reply, please include the following information:If you have not done so already, include a clear description of the problems you're having, along with any steps you may have performed so far.A new DDS and GMER log. For your convenience, you will find the instructions for generating these logs repeated at the bottom of this post.
Please do this even if you have prev... Read more

2 more replies
Answer Match 56.7%

hello, i was searching and saw timbits post on this i tried all that and it didnt work for me *not any links work with java* his problem solved but my links still dont work i registered all those things and got same errors and everything. it isnt just the pop ups but just normal links. the java it self works fine like the message box's. what could i do to fix it
 

More replies
Answer Match 56.7%

Evening Gang, wow havent had to post here for a LONG time.
I searched and while I found a few instances of very similar nature, none of them were ever solved.
The problem is this, my PC's sound was all working fine for me, the other night I watched a movie online,due to bad sound, I had to use the headphones to hear it decently, so I did, enjoyed the movie, but now my Laptop speakers no longer work.
Did all the usual stuff, Hardware manager, checked all the levels, no mutes turned on, nothing. This is strange as hell, I cannot see the jack going, the PC is very mildly used, an ACER TravelMate 7720 BTW, running XP Pro.
Does anyone have any ideas, anything I might try, I mean aside form the regular things I would normally do, checking all the properties, I did update the Realtek HD driver today, no help !
Totally Befuddled !
Thanks for your time,
-Mike.
PS I joined in 04, this site taught me so much about PC maintenance, how to solve problems, install XP, keep XP clean and running fast, and on and on.
Thanks for all the support all you Tech Guys always give,it is much appreciated.
 

A:Realtek Audio HD problem, Heaphones work, Speakers dont ?

Okay not getting any play on this, can anyone suggest where a might get help, is this just the black hole of computer problems, or should I post it in another section. Seemed most likely an OS problem, but perhaps another sectioon might get some results.
Not trying to be pushy, just really enjoyed hearing sound come from my PC.
Thanks,
-G.
 

2 more replies
Answer Match 52.92%

Here i am again, complaining about my system..
As my previous topics, this one i think is more serious as i cant boot nor open up advance boot options(f8 dont work). As soon the manufacturers logo show off, an error: "Disk read error. Press ctr+alt+del to resatrt." It remains unless i press shutdown. Power on and it still shows the same.
 
I havent finished the download of the iso(to be used as a recovery method) thats why i opt for another way which is to recover a backup copy of my registry(which iv done by manually exporting it).  However, i have encrypted it before with my administrative user account. Now, im not able to decrypt it via cipher or keys as if i run: "cipher /c thatfilename.reg" it informs me that only the user(my account) and certificate thumbprint can decrypt it. No found backup certificate or keys. Bad for me i dont know how to recover it via the certificate thumprint....
 
My last option that i try is use EaseUs Data Recovery Wizard, which i have googled about tools that can decrypt files...
Glad it runs even im only using the recovery console. I installed it on my memory card(as my pc can still detect it). Im new to this tool and still dont know what should i click on for a spedific purpose. But i have tried the partition recovery, since im thinking that maybe it could still detect missing/lost files on the drive by which windows is installed..  It search then rebuild directories for more than 4 hours. remaining time is already at 00:... Read more

A:win 7 dont boot, f8 dont work,got error: "Disk read error. Press ctr+alt+del...

Since the drive still works you might want to give SpinRite a try.  This isn't free and will probably run for days before it fixes your problems.  I do not see you getting your data back any other way since it is encrypted.  Encryption is great for keeping information private, but I've see a whole lot of data lost due to encryption.  In the end only you can say how much your data is worth.

3 more replies
Answer Match 52.5%

I have recently built a new website, i tried all links and they worked fine before making it live on Filezilla.

I was wondering if anyone knows the reason for it or even better the fix for the solution.

The files are DWG. which is a version of CAD. PDF's, Jpegs, ect. all work except DWG's.

Thanks,

Cxswxrth

A:Downloads Work Offline But Once Website Is Live they Dont Work

Yours is not Windows 7 related issues.

2 more replies
Answer Match 52.08%

i have windows xp , in a storm it was on, power went out and after that computer dont want to turn on, just making a sound as fan working, i went to a technician and he said "motherboard", but i bought one an still doing the same thing,I went to another technician and said "motherboard". how do i know what does my computer has? please help me

A:dont turn on

Lightning fried something or many things. Unless you have good hardware testing abilities, this is one time I'd say take it to a shop and get an estimate. Set a limit $100, $200, $300, or whatever you think. If it's beyond that, time for a new machine.

2 more replies
Answer Match 52.08%

ok so i have strange issue that has carried over to windows 7 from Vista on my DV6500 laptop. basicly what happens is i will be using the laptop or playing a game and the mouse will just all the sudden not allow me to click or select anything. i dont know how it happens and there is nothing different that i do from time to time.

the only way to fix it is just to control alt delete and bring up the task manager. once it goes back to the windows screen it works again.

sometimes only for like 30 seconds and it will start doing it again.

i have upgrade my bios as well as changed the OS 3x and it still has the same issue.

Can anyone please help mE???????

A:please help i dont know where to turn

  
Quote: Originally Posted by mob4life


ok so i have strange issue that has carried over to windows 7 from Vista on my DV6500 laptop. basicly what happens is i will be using the laptop or playing a game and the mouse will just all the sudden not allow me to click or select anything. i dont know how it happens and there is nothing different that i do from time to time.

the only way to fix it is just to control alt delete and bring up the task manager. once it goes back to the windows screen it works again.

sometimes only for like 30 seconds and it will start doing it again.

i have upgrade my bios as well as changed the OS 3x and it still has the same issue.

Can anyone please help mE???????


Hi and welcome to sevenforums.
Since your mouse issue has carried over from vista to win 7 it can only be a couple of things. But before I can realy be of much help I need to know everthing about your computer.
Who makes it, what model, how much ram, what kind of mouse, What OS, what mouse driver.

We can start from there

Ken

9 more replies
Answer Match 52.08%

Alright well....I have been referred to both the hardware and now the virus remove board. You can view the full thread here:

http://www.techsupportforum.com/f217...od-405619.html

But what I have pretty much been going through are BSOD, and slow startups. On little side notes Explorer.exe will sometimes restart itself when I click on the Windows Key (Start) and my network icon sometimes shows the red X over it but I am obviously connected to the internet as this post proves it....Sad part is this is a fresh install maybe 2 weeks old now. My cd/dvd drive is burned out so I dont have access to that. I am running windows vista sp2. I also have Vipre installed and running all the time. *shrug* hopefully you guys can tell me something haha.

Its now 3am and I am going to bed.

Thanks in advance I really do appreciate the help.

Eli



DDS (Ver_09-07-30.01) - NTFSx86
Run by Eli at 2:41:57.45 on Sun 08/30/2009
Internet Explorer: 8.0.6001.18813
Microsoft? Windows Vista? Home Premium 6.0.6002.2.1252.1.1033.18.3070.1990 [GMT -4:00]

AV: Sunbelt VIPRE *On-access scanning enabled* (Updated) {964FCE60-0B18-4D30-ADD6-EB178909041C}
SP: Spybot - Search and Destroy *disabled* (Updated) {ED588FAF-1B8F-43B4-ACA8-8E3C85DADBE9}
SP: Windows Defender *disabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}
SP: Sunbelt VIPRE *enabled* (Updated) {9817B764-AE4E-4B29-AEE7-725B7A50BD48}

============== Running Processes ===============

C:\Windows\system32\wininit.e... Read more

A:Dont know what else to turn to...

Hello dragonleader33,

You've been through the mill, haven't you.

I'm sorry to say that I do not see any malware here. I spent the past hour going over your other 4 page thread, and these logs. Here are the highlights of your Vista thread:


Quote:




It has been going on for sometime now and I thought I just caught a nasty bug...after doing several virus scans it kept coming up clean...so I decided to just clear the HD and reinstall the OS. To my surprise the same stuff occurs. I have ran an HD test and a memory test and both passed.





Quote:




It does appear that it's your USB drivers - either the drivers for the USB on the mobo, or the drivers for the device. It's also possible that the device is malfunctioning, or that there's a problem with the connection between the device and the USB hub (on the mobo).





Quote:




Do you have any other USB devices connected to the system? If so, please disconnect them while we're troubleshooting this problem.

You have numerous outdated drivers on your system. This is known to cause issues with Vista SP2 systems - and some of the drivers (athr.sys in particular) are known to cause BSOD's. Finally, there's a presence of a HAL dll in the drivers - which tends to indicate an incompatibility issue (which supports the supposition that SP2 and older drivers are causing this).





Quote:




After ... Read more

4 more replies
Answer Match 52.08%

Keyboard and USB dont work in windows but work in BIOS, i have also tried a ps/2 keybaord also not working in windows, i have tried safe mode, disabling driver sig enforcement, using different mice/keyboards, restored bios to default settings, ran sfc /scannow no errors detected, and still no luck any input would be amazing. I wanted to do a upgrade repair install of windows but you can only do that inside windows , basically trying everything before i have to wipe the HD and reinstall windows, i ran memcheck as well and no errors also as a sidenote it says my gpu is not found, when i have my monitor plugged into it, i am still receiving internet from ethernet.

I have windows ultimate x64
2.66 gHz processor 8gb of ram
1 TB harddrive 760 GTX GFX card

All devices work on other computers.

A:Keyboard and USB dont work in windows but work in BIOS

What were you doing on your computer when all this happened.
It's very unusual that not even a ps2 keyboard doesn't work.

Does you system boot at all into Windows 7 Normal mode of Safe Mode?
Your post is not clear to me.

If you can't boot Window 7 here is a tutorial with lot of test to do.

Troubleshooting Windows 7 Failure to Boot

What power supply is in your system?

8 more replies
Answer Match 52.08%

Attempted a restore in Safe Mode. System came back up with all icons as normal. Issue start button doesn't work, icons open file but there is not text or data...there is what appears to be wire frames where the information should be. All files still on drive but cannot access.

Safe mode does no good because everything is blank and there is no text

A:Win 7 Ult x64 Start doesnt work Icons dont work

Welcome to our forum.

Read this tutorial I think it might help you.

By Brink:
Safe Mode

Using Last known good configuration.

Another tutorial that that can be very helpful

By Brink:
System Recovery Options

2 more replies
Answer Match 51.66%

Hello.I have a hp pavilion book dv6 windows vista by default 2gb ram core 2 duo.....I have upgraded it to windows 10 for quite a while now...Today,when I was playing Minecraft of my laptop...my laptop suddenly turn completely off(it was on charging)I tried restarting it and after some luck it dud start up and at the windows 10 loading screen it turned off...now it wont turn on...my laptop charging indicator doesn't even glow when the laptop is charging...plz help

A:laptop dont turn on

After some tries with some Luck it did start up*3rd line

3 more replies
Answer Match 50.82%

My hp laptop wont turn on only charging light is shown on... Its seems to be totaly dead plz help what can i do?? I hibernate the system last time before this problem.. Now its not turn on only charhing light shows on no other light or sound.??My laptop model is : g6-2136TXPRODUCT CODE: B9K65PA#ACJSERIAL : 5CD2280PDY

More replies
Answer Match 50.82%

Hi to all

Today i try to turn on my notebook, and i click power button and it dont happens nothing

I mean, black screen, fans dont move, nothing..............

The led of power turns on, i can open dvd-rom driver, but nothing more...

When i say black screen i mean that not even bios

I had think in the problem and i just can imagine is motherboard, processor or power suply, but i dont know how to see what is the problem

I hope someone help me..... PLS.....
 

A:Compaq Evo N1000V dont turn on

you could try access the BIOS by pressing F10 at boot and then load setup defaults or something like that, be careful because the defaults might not correctly specfy how much graphics RAM the notebook should use, also power settings might be wrong, ACP should be enabled, OS type should be plug-and-play .. don't know if your notebook actually has any of these settings, hope it helps ..

more info at compaq:
http://h20000.www2.hp.com/bizsuppor...skId=115&prodSeriesId=96306&prodTypeId=321957
 

5 more replies
Answer Match 50.82%

Hi, Im facing some problem when i turn ON my Lenovo G510 Laptop, it doenst show off anything but its turned on. LED is black neither shows any power goes into it. I turn if off and close the LID and open it again and turn it on , LCD shows power and turns on. How to solve this issue , i dont think LCD has any problem.

More replies
Answer Match 50.82%

my windows dont turn off or reboot when i ask to do it. and i find why ,i have a program or something else its on . its call xpwin.exe if i turn off this one and i ask windows to turn off or rebbot he do it. i try to find on the internet whats is this program and i find nothing about this xpwin.exe. somebody could try to help mee to find whats its this xpwin.exe concern .

thanks you verry much.

A:windows xp pro dont turn off or reboot

you are infected with a virus

winxp.exe is a process which is registered as [email protected]\r "This virus is distributed via the Internet through e-mail and comes in the form of an e-mail message, in the hopes that you open its hostile attachment.\r" The worm has its own SMTP engine which means it gathers E-mails from your local computer and re-distributes itself.\r "In worst cases this worm can allow attackers to access your computer, stealing passwords and personal data.\r" This process is a security risk and should be removed from your system.

fix it with this

Code:
http://www.liutilities.com/products/campaigns/plib/rb/?s=winxp.exe

10 more replies
Answer Match 50.82%

Hello, after a year of use we Yoga 2 13 "does not want to turn on.Does not start, you can not hear the fan, the keyboard does not light up, nothing.Only on the power button light indicating power is on when is power charger. Tips what i can do with it? Best RegardsPawe?

A:Yoga 2 13" - dont wont to turn on

Did you try pressing the NOVO button to see if you can get into recovery?  Page 11,, button 3.
 
https://download.lenovo.com/consumer/mobiles_pub/lenovo_yoga_2_13_ug_english.pdf
 
Regards.
Dave

1 more replies
Answer Match 50.82%

Hi!
I have this issue that when I turn on my computer, the power LED does not turn on but you can hear the fans working properly. I don't the issue and I'm not much of an expert with computers. Please help me solve this issue because I'm completely clueless.
 

A:Try to turn on my computer but only the fans work and the power led does not turn on

How old is the computer, what was the last change you made to the computer and when you last shut it down did it shut down correctly?
 

3 more replies
Answer Match 50.4%

I try to turn on my services in services.msc "Window Audio" its wont turn on and its appear this errror "Error 1068: The dependecny sercice or group failed to start." pls help me Thank You

And here is a screenshot:
 

A:Audio Services won't turn on (Dont Ignore me :[ ) Pls help

14 more replies
Answer Match 50.4%

i have recently recieved my friends pc to try and help remove a fake AV virus from his pc. it was not one that popped up a GUI but it did block alot of legit AV programs and internet.
I was able to boot into Safe Mode and run Avira and SuperAntiSpyware to what i thought was removing malware and trojans.
after restart it would come up with Bad Image warnings of missing or invalid DLL files Ie. C:\WINDOWS\system32\vizfxs.dll which is one of the warnings.
it will pop up different warnings for different program but the same or one other DLL will appear to be missing after using SAS and Avira.
After that i installed the Compaq HDD in my XP SP2 machine as a slave and ran Avira and SAS again with SAS saying clean and Avira having i think 31 or 32 warnings of files not able to be opened for scan. so now im here at a loss as to what to do and what to run. i have SAS, Avira, MBAM, Spybot S&D, and HJT on a backup disk if needed to run but i dont know where to begin or what to do with this PC now.
any help will be greatly appreciated and if i didnt explain something well enough please let me know.
Thank you in advance
Dennis

Compaq Presario
AMD Athlon XP 1800+
1.53 GHz 352 MB RAM

More replies
Answer Match 50.4%

ok my volume slider is ridiculous. i dont know what to do with it. it goes down for no reason and when i put it back up, it goes down again. this has happened for atleast 1-2 years. sometimes i scroll my keyboard volume nob up a little and he volume slider goes all the way up and stays there no matter how much i make it go down. same thing when i turn the nob down. i dont know if its the keyboard volume nob or its something with my sound card cause i tried updating it but it says that its up to date. i dont know what to do cause i've been dealing with this problem for a while now. i've tried everything and nothing works. can someone help me?

A:Im really startin to lose hope and i dont know who to turn to

"keyboard volume nob"


Leave it alone - use the software volume control.


Does the volume then do the same thing?

5 more replies
Answer Match 49.98%

So yesterday my laptop said it was installing updates, and got stuck on a purple screen 'We couldn't complete the updates, undoing changes, don't turn off your computer'
24 hours later and about 10 hard resets and it's not changing or rectifying

HELP

More replies
Answer Match 49.98%

I brough this laptop, install windows 8.1 and update, install all devices (except ge force experiance becouse it made my computer blue screens even wile pressing FN+X to open managment devices r computer folder, even while writing password to log in to computer) resolution is ONLY 1920-1000 and ge force gtx 960m after instaling devices show in managment devices but it DOSNT turn on while turning on games like Tomb raider from 2013, l4d2, witcher 2 (well it does turn on witcher 2 only in but games fps are like 200+). Everything turn on Intel HD gra[hics 4600. I had laptop without windows ardy in. There is NO option when i right click on game to turn on by geforce gtx960m (even with nvidia experiance i manage to open it didnt show me option to support those games, while on website it write it does (expect witcher 2) I buy this laptop 3 weeks ago and still cant play anything -.-

A:Geforce gtx 960m on laptop lenovo y50 dont turn on...

Huh. Surprised this hasn't been answered. I'll take a crack at it, though I'm still using a Lenovo y50 with a gtx 860m.You state that you've attempted to use the gtx 960m by right-clicking on the game (icon?) and that you've looked for the option in nvidia experience.Have you tried navigating the NVidia Control Panel? Google that, and good luck. I'm surprised and disappointed no one on these boards answered your questions. I hope you went direct to Lenovo support after you left this post, and that they helped you resolve your problem, they've been helpful for me in the past.

1 more replies
Answer Match 47.88%

I have a compaq presario 5000, the mouse curor keeps hanging and its driving me nuts!! I can be moving the mouse around and all the sudden the cursor just hangs for 3 seconds. also, if im typing, it will hang, i can be typing and all the sudden the lrs will stop showing up on the monitor for about 3 seconds, then they will pop up. The operating system is ME and it is maintained well and running fine, i think its some sort of hardware problem, any help here guys? thanks!
 

A:compaq cmputer help please...

The problem might be that you are running low on Ram Memory. How many programs/processes do you have running it the background? Windows ME isn't very good with managing memory. It will hang if it gets overloaded. Plus it would be a good idea to check and make sure that you don't have any viruses or spyware infecting your computer. Spybot S&D with Ad Aware SE are good programs to have handy for spyware. Avg Free is good enough for viruses to keep you clean if you don't want to buy Norton or McAfee. Double check all that and get back to us...
 

2 more replies
Answer Match 47.88%

I recently bought Watch_Dogs and tried to play it on my computer. It worked fine at first, but my computer soon got very loud and hot. It does not run well at all whenever i play it now. This also applies to other games. I find this odd, because my system is easily good enough to run all my games, yet they have terrible performance. I checked the temperature of my gpu, and it maxed out at about 80 Celsius. I am worried that i have caused permanent damage. Could it be a lack of fans? Or perhaps my power supply is too small? How would i fix this issue? Thanks!
Specs:
ASRock Z77 Extreme3 ATX LGA1155 Motherboard
14 Gigs of Ram
Gigabyte Radeon R9 290 4GB WINDFORCE Video Card
i7 2600k
Microsoft Windows 8.1 (OEM) (64-bit)
NZXT Source 210 Elite (White) ATX Mid Tower Case (For fan info)
550 watt power supply (which i think may be the problem)
 

A:Is my cmputer overheating?

13 more replies
Answer Match 47.88%

I have run spybot spysweeper, adware 6.0 and cw shredder i am still getting locked up and i also have a very slow connection here is my hijack this log

Logfile of HijackThis v1.97.7
Scan saved at 9:26:17 PM, on 3/19/04
Platform: Windows 98 SE (Win9x 4.10.2222A)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\SYSTEM\KERNEL32.DLL
C:\WINDOWS\SYSTEM\MSGSRV32.EXE
C:\WINDOWS\SYSTEM\SPOOL32.EXE
C:\WINDOWS\SYSTEM\MPREXE.EXE
C:\WINDOWS\SYSTEM\MSTASK.EXE
C:\WINDOWS\SYSTEM\MDM.EXE
C:\PROGRAM FILES\GRISOFT\AVG6\AVGSERV9.EXE
C:\WINDOWS\SYSTEM\mmtask.tsk
C:\WINDOWS\EXPLORER.EXE
C:\WINDOWS\TASKMON.EXE
C:\WINDOWS\SYSTEM\SYSTRAY.EXE
C:\PROGRAM FILES\LOGITECH\ITOUCH\ITOUCH.EXE
C:\PROGRAM FILES\MUSICMATCH\MUSICMATCH JUKEBOX\MM_TRAY.EXE
C:\WINDOWS\SYSTEM\HPZTSB07.EXE
C:\PROGRAM FILES\GRISOFT\AVG6\AVGCC32.EXE
C:\PROGRAM FILES\YAHOO!\MESSENGER\YPAGER.EXE
C:\PROGRAM FILES\WEBROOT\SPY SWEEPER\SPYSWEEPER.EXE
C:\WINDOWS\SYSTEM\WMIEXE.EXE
C:\WINDOWS\SYSTEM\DDHELP.EXE
C:\PROGRAM FILES\INTERNET EXPLORER\IEXPLORE.EXE
C:\WINDOWS\SYSTEM\PSTORES.EXE
C:\WINDOWS\DESKTOP\HIJACKTHIS.EXE

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = about:blank
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = about:blank
O1 - Hosts: 217.116.231.7 aimtoday.aol.com
O2 - BHO: (no name) - {02478D38-C3F9-4efb-9B51-7695ECA05670} - C:\PROGRAM FILES\YAHOO!\COMMON\YCOMP5_3_12_0.DLL
O2 - BHO: (no name) - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\PROGRAM FILE... Read more

A:Help Please My Cmputer Keeps Locking Up!!!

Closing duplicate; please just continue in this thread and remove the programs indicated.

http://forums.techguy.org/t211072/s.html
 

1 more replies
Answer Match 47.88%

when i try to switch my computer can,t make log off until i diconnect the power.
what can i do plz?
 

A:my cmputer can,t make log off

6 more replies
Answer Match 47.88%

Been having problems with computer, it has gotten real slow and sometimes when click on an icon to run something nothing happens like it freezes up for a bit. I have tried to do system restore to earlier dates but no help. Listed below are two messages I get several time a day. Is this a virus or what? Any help would be greatly appreciated.

Host Process for Windows Services stopped working and was closed.

An intrusion attempt by 194.28.112.21was blocked. Application path\DEVICE\HARDDISKVOLUME1\WINDOWS\STSTEM32\SVCHOST.EXE

I have attached the Attach and ARK txt files per your request and pasted the DDS file results.

DDS (Ver_10-10-10.03) - NTFSx86
Run by conwayjs at 20:49:57.73 on Tue 10/19/2010
Internet Explorer: 8.0.6001.18943
Microsoft? Windows Vista? Home Premium 6.0.6002.2.1252.1.1033.18.2045.953 [GMT -4:00]
SP: Windows Defender *disabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}
============== Running Processes ===============
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k secsvcs
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\SLsvc.exe
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svch... Read more

A:Cmputer problems Please help

Hi -

I'd like a look with a different rootkit scanner.

Scan With RootKitUnHooker
Please Download Rootkit Unhooker Save it to your desktop.
Now double-click on RKUnhookerLE.exe to run it.
Click the Report tab, then click Scan.
Check (Tick) Drivers, Stealth. Uncheck the rest. then Click OK.
When prompted to Select Disks for Scan, make sure C:\ is checked and click OK
Wait till the scanner has finished and then click File, Save Report.
Save the report somewhere where you can find it. Click Close.
Copy the entire contents of the report and paste it in a reply here.

Note** you may get the following warning, just click OK and continue.

"Rootkit Unhooker has detected a parasite inside itself!
It is recommended to remove parasite, okay?"

19 more replies
Answer Match 47.46%

When i first bought my comp which was 1 month ago, i realsied the mic didint work. I previously thought it was just my microphone was broken but now i found out it wasnt. I tested 4 mics now and they r all broken? they all work on other comps. So ther must be somthing to do with the comp.

I tried to go to record etc or even trying to talk on msn etc but it wont work. Is it some setting or somthing is broken?

i tested the mic on lots if programs eg , games, voice recorders, msn etc and all dont work

Comp detials:

AMD Athlonx2 3600+
512 ram, ASUS m2v motherboard
Geforce 7300GT\

Can anyone help, ty

A:Mic Dont Work

If you can see the speaker icon on your taskbar, right-click on it, and select Open Volume Control, then while you're there, check to see if under your mic there is a checkmark on the Mute. If it is, clear it out.If you don't see the speaker icon there, then you'll have to click on Start,,,, Control Panel,,,,, Sounds and Audio Devices. Then click on the Audio tab, and then click on Volume under the section Sound Recording, then check to see if the mic is on mute. If it is, then clear out the checkmark.Do that and post back.

2 more replies
Answer Match 47.46%

Dear,
 
in my new notebook 13-u004nl <> keys don't work
but they have the CTRL function
I already run the HP Support Assistant and I made all the drive update without result
 
The notebook is in guaranty 3 months old.
Could you please help me to solve the problem?
 
[personal information removed]
Serial number: 8CG62301JD 
Product Number: X0M02EA#ABZ
 
Thanks in advance
Ciao

More replies
Answer Match 47.46%

Ive got a keyboard and mouse which didnt come with the computer, Esc seems to work and does does Print Screen. But when i press F1-F12, the dont appear to do anything, is there anyway to change settings so that they work?
 

A:F1 - F12 Dont appear to work

Depends on the keyboard. Without knowing the make/model # we can't give any specific answers.

But in general look on the keyboard for an 'F-lock".
 

2 more replies
Answer Match 47.46%

Internet Explorer 7
Vista Home Basic

Whenever I try to use IE it wont connect to the internet (I can use Firefox with no problems) - I have attached a screenshot of the error window.

I have tried the following to cure the problem but all to no avail:-
- ensured that I have applied all current Windows updates
- ran Registry Mechanic to fix any registry problems
- upgraded to IE 8 to see if that would work but same problems

Any suggestions would be gratefully received...

A:IE dont work !

Are getting this error whle opening any of the specific website , or its common for all the websites .

7 more replies
Answer Match 47.46%

http://www.good-tutorials.com/track/8868
on part of this tutorial it asks you to select the top of the rounded rectangle by pressing alt and clicking the top but when i do this it does not select the top part, so what do i press to make it select the top part?
 

A:this dont work right

Hi will182

Did you get this resolved?

Pick the Rectangular Marquee Tool, hold Alt, and select the upper part of the shape.Click to expand...

I interpret this to mean while holding down the Alt key, using the Rectangular Marquee Tool, you would then select the area.
The Alt key will not select it for you.

Did you Rasterize the Layer first then Ctrl+click to select the entire layer?
It sounds like the Alt key is used to prevent the entire layer from being deselected while you select the upper portion of the document.

But hey, I could be wrong...
 

1 more replies
Answer Match 47.46%

When I put a disc, any disc, into the dvd rom drive it will spin the disc around for about 30-45 seconds and make noise like it wants to start reading it but then it just stops and does nothing and does not read it.

When I go into 'My Computer' and right-click on the drive it recogonizes it and says it is working properly. Also on the self diagnostics it says it is working properly too. It just will not read a disc though, of any format.
pleas help

A:cd/dvd rom dont work

After you put a disc in, can you access the disc through My Computer?

If you can, it may simply be that autorun has been turned off. To turn it on (from http://autorun.moonvalley.com/enable.htm):


Quote:




1. Open Windows Explorer by pressing the Windows + "e" key.
2. Right-click the desired CD-ROM and select Properties from the menu.
3. Select the AutoPlay tab.
4. Select each item from the pulldown list and for the Action to perform, select "Take no action" to disable autorun, or pick the apporpriate action to take if enabling autorun.
5. Select OK.




If that doesn't work, maybe this Microsoft kb article might help: http://support.microsoft.com/kb/330135 - a word of warning though, one of those solutions involves editing the registry, which isn't advisable unless you know what you're doing.

8 more replies
Answer Match 47.46%

I have add-ons installed, and they are all "This add on will be installed when Firefox restarts" and they never do! They worked fine, and then all of a sudden....kaput. Nothing done to provoke it, i already uninstalled Firefox and reinstalled it.

More replies
Answer Match 47.46%

Gmm i have gforce2 mx400 video card and i think i got the right driver but when i try to play warcraft 3 everythink become red graphic became #@^#$%&\\\\zzzzz\\\\%&* crazy i almost cant see anything its very strange!!!!

when i go start/run/dxdiag and display settings there is an error:
The file nvdisp.drv is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs. You may be able to get a signed driver from the manufacturer of the hardware device.

im using windows ME... i had windows Xp(ntfs) for few days ago,and when i tryed to play wc3 in winXp everythink was working properly except my amd 500mhz isnt enought for that game... i format my hard in fat32 and put windows ME... i thought Me is more better because he uses less memory and maybe game would work faster...

Game does work a bit faster less lag, but this bug or what should i call it with graphic....... Im playing online and suddenly BAH everything reeeed((((

well if somebody has a problem like that mb u can help me thx anyway for reading all this.....
 

A:Plz help me wc3 dont work!

What version Detonators are you running? Most people recommend 28.xx for GF2. How much RAM do you have? Also 500MHz is cutting it pretty close.
 

5 more replies
Answer Match 47.46%

No usb devices work what should i do

A:USb dont work

http://img825.imageshack.us/f/devicec.png/

this is what it shows..in exclamation marks

9 more replies
Answer Match 47.46%

<a href="http://img176.imageshack.us/my.php?image=picturezs0th1yy3.jp" target="_blank"><img src="http://img176.imageshack.us/img176/1325/picturezs0th1yy3.jpg" border="0" alt="Image Uploaded by ImageShack Toolbar"/></a>

If this comes out as two links if you click on the first there should be a picture if their is'ent just ignore I'll go back to the drawing board.
 

A:dont know if this will work

11 more replies
Answer Match 47.46%

hi, i dont know why, but my IE, aim, and wmp started not working..

please help me fix this problem..

here is my HJT log


Logfile of HijackThis v1.99.1
Scan saved at 4:27:44 PM, on 1/30/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.5730.0011)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\CTsvcCDA.exe
c:\program files\mcafee.com\agent\mcdetect.exe
c:\PROGRA~1\mcafee.com\vso\mcshield.exe
c:\PROGRA~1\mcafee.com\agent\mctskshd.exe
C:\PROGRA~1\McAfee\SPAMKI~1\MSKSrvr.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\MsPMSPSv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\PC-Clean\PC-Clean.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\PROGRA~1\McAfee\SPAMKI~1\MskAgent.exe
C:\Program Files\AIM6\aolsoftware.exe
C:\WINDOWS\system32\dwwin.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\WINDOWS\system32\dwwin.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\HJT\HijackThis.exe

O2 - BHO: BitComet ClickCapture - {39F7E362-828A-4B5A-BCAF-5B79BFDFEA60} - C:\Program Files\BitComet\tools\BitCometBHO.dll
O4 - HKLM\..\Run: [NvCplDaemon] RUNDLL32.EXE C:\WINDOWS\system32\NvCpl.dll,NvStartup
O4 - HKLM\..\Run: [UserFaultCheck] %... Read more

A:HELP!!! IE, aim, WMP dont work!!

can anyone help me?

2 more replies
Answer Match 47.46%

Well you know my new laptop. Tried to read the new Windows xp cd that went with it on my old laptop to copy old files and configurations (it says so in the manual). NO go!
It just wont take it, says the cd-drive is not ready... cant open the cd any way I try. Tried Run and D:\setup, but still the new cd cant be read.
Other cd┤s work ok though on my old laptop so it cant be anything wrong with the drive.
Have dusted the cd but its new and never used and besides I put it in the new laptop and it works there.
 

A:Some cd┬┤s work, some dont!

You can try cleaning the cd player but most likely you will need to call it in for warranty work.
 

2 more replies
Answer Match 47.46%

IBM 8086-W1D mini case desk top - OS winXP home
Ok here is what happened. the electricity went out the other night. It came back on about 10 min later and I was not at the computer but when I looked at it all seemed good because it was at the regular desktop screen. I have surge protector that it is plugged into.
Everything works fine on it except!!! none of the USB ports show the drives that are plugged into them. I have a WD passport 500gig a thumb drive that if I put them into any of the 6 USB ports windows usually shows a pop-up like do you want to copy files and so on that I cancel out of. they also dont show up as drives in My Computer. I have looked at the Device Manager and the USB controllers section... none have anything showing errors or conflicts. I have even deleted them out and had Windows restart, and Windows re-installed them all, and still nothing is recognized. The USB ports also power the devices because the WD Passport light comes on and I can feel it spinning. I also plugged in a USB CD burner I have, the lights come on but it does not show up in My Computer.

Any Ideas on what I need to do to fix this?
Thanks,

A:USB's dont work right

Have you tried any of these devices on any other machine? Also have you tried any device you know for sure is working on your own machine?

Also, have you tried uninstalling the USB devices on the Device manager and rebooting?

2 more replies
Answer Match 47.46%

brand new computer, brand new keyboard, brand new clean install of windows 7 (it did it before this and after this). here's the issue:

f1-f8 work fine for everything in every program, f9-f12 dont do anything anywhere as far as i can tell. f9 has the play/pause function, f10 stop, f11 rewind, f12 fast forward.

these may very well work if im playing a dvd, i havent tried. but honestly i could care less if they work with a dvd but dont work anywhere else. i tried looking around the keyboards drivers and whatnot but i dont see anywhere i can set shortcuts or erase bindings that have been put on a key. is there another program or place i need to look into to unbind or reassign these?

pS: the keys themselves actually work as i can hit them during "press any key to continue"...

thanks in advance.

A:f9-f12 dont work

have you got a Fn key on your keyboard? try holding that then pressing them, alot of keys have 2 functions tied to them especially on laptops

3 more replies
Answer Match 47.46%

Hi dont know if any one can help notebook dv2418nr pavilion vista. I hook up a zen mp3 mp4 worked just fine then for some stupid reason computer asked to make port faster so device can perform better cant remember its been over a year my usbs power up device;s but wont recognize. hp wont help says send computer I am not cant afford it.I told them they need to fix my computer. Cant afford a new one.Creative tech say its the computer and wont help.I have tried reinstalling,removed vista and installed xp hp wont give bios password.
 

A:usb's dont work

10 more replies
Answer Match 47.46%

Home network of 2 pc, cross cable, windows XP on both

Lan dont work and dont know why. Ping are ok. I think it will be easier to delete all network configuration and make a new one.

Show me how or lead me on a web site

thanks
 

A:LAN dont work

What doesn't work? If you are able to ping each form the other, are you unable to get to shared folders? For that, each PC must have the same workgroup, and the user account with the same password should be on each one. If you can't see each other in Network Neighbohood, then you need to set one to be the "DomainMasterBrowser". If the key is the same as in 2k, then use regedit and go to HKey_Local_Machine\System\CurrentControlSet\Services\Browser\parameters and set the value "IsDomainMaster" to True on one PC only.

Hope this helps.
 

1 more replies
Answer Match 47.46%

My monitor working with HDMI but not with VGA. Notebook recognize my monitor, but monitor says no signal. I tried another monitor with same problem. And another HP notebook works fine with this monitor through VGA. I updated video card driver. What can else be a problem? (VGA never work on this notebook, it isn't new but it happened when i firs time use it)

More replies
Answer Match 47.46%

i tryed doing what cheeseball 81 told me to do.going to start,thenrun,typing in regsvr32 softpub.dll but all i got was a box saying loadlibrary("regsvr softpub.dll")failed.get lasterror returns 0x00000485.
dont understand why. please help me.
from wickedwench.
 

A:dont work

It looks like you are referring to another thread. People reading this one have no idea what you are referring to. Please go and post in the original thread.
 

1 more replies
Answer Match 47.46%

Any program that is freeware and i install ir or a cracked program or game or whatever just dont work... i mean when i try to turn it on by clicking the exe icon the mouse pointer becomes the loading kind (hourglass is beside it) and it stays that way for like 3 seconds and nothing happens the mouse pointer just returns to normal

please help i am begging you
 

A:Just dont work (pls help)

6 more replies
Answer Match 47.46%

Hi
Can somebody plaese help with Wupdater removal. I have checked most of the sites for wupdater removal tool...& finally scanned my computer by using > hijackThis < tool.

But I still can figure out what to fix/delete. CAN SOMEBODY PLEASE HELP!!!
Here is what I got after running this utility

Logfile of HijackThis v1.97.7
Scan saved at 10:47:22 PM, on 12/29/2003
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\NavNT\defwatch.exe
C:\Program Files\NavNT\rtvscan.exe
C:\WINDOWS\System32\RegSrvc.exe
C:\WINDOWS\System32\RoamMgr.exe
C:\Program Files\Intel\Switching\User\RoamSvc.exe
C:\WINDOWS\System32\MsgSys.EXE
C:\WINDOWS\system32\ZCfgSvc.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\pctspk.exe
C:\Program Files\Apoint\Apoint.exe
C:\Program Files\Intel\NCS\PROSet\PRONoMgr.exe
C:\WINDOWS\System32\hkcmd.exe
C:\Program Files\Roxio\Easy CD Creator 5\DirectCD\DirectCD.exe
C:\PROGRA~1\NavNT\vptray.exe
C:\Program Files\Dell\QuickSet\quickset.exe
C:\WINDOWS\System32\P2P Networking\P2P Networking.exe
C:\Program Files\Altnet\Points Manager\Points Manager.exe
C:\WINDOWS\System32\DSentry.exe
C:\Program Files\Messenger\msmsgs.exe
C:\PROGRA~1\PANICW~1\P... Read more

A:Wupdater is still showing on my cmputer; PLEASE HELP

Hi technyc

Welcome to TSG!

This entry indicates that you have Kazaa or you had it at one time:

O4 - HKLM\..\Run: [P2P Networking] C:\WINDOWS\System32\P2P Networking\P2P Networking.exe /AUTOSTART

I highly recommend you get rid of Kazaa. It is full of spyware and the source of many problems.
Go here and get KazaaBegone and run it to get rid of Kazaa:

http://www.majorgeeks.com/download.php?det=3446
Run Hijack This again and put a check by these. Close all windows except HijackThis and click "Fix checked"

R3 - URLSearchHook: PerfectNavBHO Class - {A045DC85-FC44-45be-8A50-E4F9C62C9A84} - C:\PROGRA~1\PERFEC~1\BHO\PERFEC~1.DLL

O2 - BHO: myBar BHO - {0494D0D1-F8E0-41ad-92A3-14154ECE70AC} - C:\Program Files\MyWay\myBar\1.bin\MYBAR.DLL

O2 - BHO: NavErrRedir Class - {A045DC85-FC44-45be-8A50-E4F9C62C9A84} - C:\PROGRA~1\PERFEC~1\BHO\PERFEC~1.DLL

O3 - Toolbar: &SearchBar - {0494D0D9-F8E0-41ad-92A3-14154ECE70AC} - C:\Program Files\MyWay\myBar\1.bin\MYBAR.DLL

O4 - HKLM\..\Run: [P2P Networking] C:\WINDOWS\System32\P2P Networking\P2P Networking.exe /AUTOSTART

O4 - HKLM\..\Run: [Trickler] "c:\windows\temp\adware\fsg_4104.exe"

O4 - HKLM\..\Run: [AltnetPointsManager] C:\Program Files\Altnet\Points Manager\Points Manager.exe -s

O4 - HKLM\..\Run: [updater] C:\Program Files\Common files\updater\wupdater.exe

O16 - DPF: {1D6711C8-7154-40BB-8380-3DEA45B69CBF} (Web P2P Installer) -

Restart to safe mode and delete:

The C:\Program Files\Common files\updater fo... Read more

1 more replies
Answer Match 47.46%

Hello,

i was having one problem with the bsod when i shutdown the computer.Here is the dump report:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF8000328B1A4
BCP3: 0000000000000000
BCP4: 0000000000000028
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
can anyone explain this error?It would be nice if anyone can explain this error.

A:BSOD during cmputer shutdown

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

4 more replies
Answer Match 47.46%

Hi friends

I have xp window in my computer.when i want to start my computer in the morning.I need to restart 20/25 time.
In first 7/8 attempts i reach to that mode where it gives options you can start your computer in safe mode or in other 3 options for 30 seconds.
when i reach to internet explorer computer again get frozen again i need to restart 3/4 times.Even if i dont touch mouse or keyboard for 10/15 minutes i need to repeat it again.

I already reinstal the window so many times there is no change getting worser day by day.

Please help me

Thank you in advance

A:Need to reStart my cmputer 20/25 times

Right click on the C drive in Explorer and go Properties > Tools > Check Now (under Error Checking). Check both boxes then click "Start Now". A message will pop up saying that Error Checking will run after you restart the computer. Restart the computer and Error Checking will run automatically after the restart. After it?s finished it will restart into Windows automatically.Go Start > Run and type "eventvwr.msc" (without the quotes). Click on Application and select the most recent winlogon entry. It should give the chkdsk log. Post the log back here.

16 more replies
Answer Match 47.46%

Currently i have a modem, my other computer is not able to access internet. Event viewer shows DHCP something like IP is occupied by someone.

I already tried ipconfig renew and release and tried restarting my modem, it still grabs the same ip not allowing my computer to access internet due to this conflict.

Is there way to fix this issue?

A:Cmputer Not Able to Access Internet

Verify that the IP on one computer is not setup as a static IP.

You can do that by checking out the connection properties via Networking in the Control Panel.

12 more replies
Answer Match 47.46%

hi ive just got a berklin wireless adapter pluged it into my computer and it does not find any connections yet when i plug in my laptop(windows 2000) it finds many connections in the same place my comuter is a packard bell with 512mb ram windows xp im wondering if the usb ports hve not got enough juice can anyone help?
 

A:cmputer help wireless adapter

9 more replies
Answer Match 47.04%

how do you get emails from my desk top to my laptop
 

A:emails dont work

How is your email client configured on your desktop?
 

3 more replies
Answer Match 47.04%

hello all sevenforums.com friends i have a problem with my microphone the problem is that my microphone is plugged in and stereo mix is working fine but microphone is not recording and recording devices showing me that my microphone is not plugged in but exactly my microphone is plugged in i try all microphones i have but it just did not work please help me

P.S sorry for bad english language

A:microphone just dont want to work

Looks like it is probably muted

Look here

Look at the adding microphone section

9 more replies
Answer Match 47.04%

my problem is also the sound but wat i wanna ask is like i have a dell pc and the audio wont work. i phoned dell people and they said it is a software issue and that they are going to charge me and i dont wanna pay. but can u help me with this one thing. i wanna format my pc with a another xp cd not the one dell gave me, do u think that will resolve the audio software issue.

thanks.

A:audio dont work

Here is what i would recommend that you do. Go to your device manager. Control Panel > system > device manager. Look for any places with a yellow "?". This is a device that has a problem or isn't working. Then either google the name of the manufacturer and the device model number, or you can post them up on here and we can help you find the drivers.

As for reformatting with a new xp cd. You are going to have to do a lot of updating and find of drivers reguardless. I would recommend that you hold off on that unless you absolutely have to and then do it.

Cheers!

2 more replies
Answer Match 47.04%

Hello all, i have a problem with my usb root hub after i installed Win 8 from Win7. Only my USB 3.0 dont work anymore... I installed new driver, it detect my WD passport then 2 sec after, nothing anymore and error 19, uninstall then reinstall nothing happen.

Tx for help me, i used my usb 2.0, all work great!
P.S. sorry for my bad English, i speak french... MOBO info : Asus P8Z68 deluxe!

A:USB 3.0 dont work anymore...

Look at this thread:
USB3 - still missing a new Intel USB3 driver

In #10 is a solution. It worked for me

2 more replies
Answer Match 47.04%

Dont know if this is the right section for it, but oh well.

My problem is that some keys on my keyboard doesnt work, which is a little bit annoying. Mainly the Apostrophe (which i use alot) and the squigly thing next to the *1* key.

I tried another keyboard but i got the same result.

A:Some keys dont work.

Go to Control Panel/Region and Language. Go to Keyboards and Languages tab and click Change Keyboards. Make sure you have the Keyboard for your Region (ex) Keyboard US, or wherever you are from. Also do the same in the Advanced Key Settings tab.

1 more replies
Answer Match 47.04%

I have had this acer x3910 for 5 years and have never been able to get sound out of the headphones and turn off the external speakers. Its realtek audio and I have tried EVERYTHING

THX
 

A:headphones dont work

What is the brand and model of the headphones?
 

1 more replies
Answer Match 47.04%

All of this started a few days ago. Suddenly, some of my keys stopped working.
They work sometimes and they go out.
It's like on and off.
Here are the keys
(q,u,t,p,j,1,3,left arrow and maybe a few others.)

I'm new here btw.
Thanks for the help in advance.

A:Certain keys dont work

Hi:

Sounds like a bad keyboard.

A bit of computer info, perhaps (e.g. fill in the "specs" in your profile), might help.

Cheers,

4 more replies
Answer Match 47.04%

My 32 bit IE has not worked for a long time I have tried everything and finally tried turning off my add ons and it worked so I went back and tried turning them off one by one and counld not find the one that is causing the problem. Im not even sure what these add ons do im not very advanced in pcs I can just follow instructions. Can someone please tell me step by step how to delet all these addons and tell me if these addons will hurt the way my PC works! Thanks in advance from a mom ready to pull her hair out LOL.

A:IE 32bit dont work NEED HELP PLEASE!!

The only one you really need is Flash player. Your browser should notify you if any others are needed. Safe ones are generally Java, WMP or Quicktime plugin, a reader plugin, Silverlight, Shockwave. But any one of those could have a corrupt install, so I'd uninstall each in Control Panel and then reinstall them after googling for their download - or wait til you are prompted to install any other than Flash and any you know you use regularly.

1 more replies
Answer Match 47.04%

hey im a new member here..some background info.
built this machine not too long ago. using xp64. AM2 3800 cpu. 1gig ddr800 ram. onboard video and sound.

anyway..
just out of no where my sound stopped working, but not entirely. i can listen to stuff on itunes and certain webpages. but stuff like youtube sound and AIM sounds dont work! i dont get any startup sounds or anything either.

i tried reinstalling my realtek drivers but no dice.

any help is greatly appreciated!
 

More replies
Answer Match 47.04%

Hi...

I have a bunch of fonts that have been with me since the advent of Windows (it seems). Recently I upgraded the machines on my network to Windows 7 and oddly, when I loaded the fonts back on board, some worked, some did not, without any real rhyme or reason.

Now, I find that opening some documents (in MS Word, and Publisher) present that substitute font dialog thats well, a bit of a pain in the backside.

Anybody know anything about this? Why do some come across just fine, others dont? I am happy to send samples if it helps - but I just dont know if this can be fixed or not, and would love to hear some kind of expertise though I know fonts are kind of "no worries, until they dont" type things.

Thanks!

A:Fonts - why do some work, others dont - anybody know?

Did you install the fonts or simply copy them to the Fonts folder?
In W7 you have to manually install fonts.

9 more replies
Answer Match 47.04%

ASUS P4800S SE mboard have the latest drivers but it doesnt seem to work

or is it me

S/PDIF Out from m/board yellow (one) jack to amplifier 2 rca jacks

soundmax drivers

do you have to install special driver for this to work

sound card speakers work fine s/pdif dont

Plz Help me
 

More replies
Answer Match 47.04%

Hi all, 
 
A few days ago I was updating my drivers on my windows 7 PC (Specs: http://pcpartpicker.com/p/WWxRXL).
 
After updating the USB drivers, my wireless USB mouse and keyboard stopped working in windows altogether. They work fine in bios.
I used a USB to PS/2 adapter but neither mouse nor keyboard would work there either.
 
Anyone have any idea how I can get into my pc? 
 
Thanks in advance, 
 
Thibauld

A:Peripherals dont work

Are they recognised in Device Manager? Is Plug And Play enabled in services.msc?
 
Do you have a wired keyboard to check that?

12 more replies
Answer Match 47.04%

Hi all!!

I have a problem with my connection in my home. In the even log said:

19 July> The IP address lease 192.168.2.101 for the Network Card with network
address 00167611C633 has been denied by the DHCP server 0.0.0.0

I reset my Lynksis and install again my wireless, but dont work yet. the message is:

Your computer has automatically configured the IP address for the
Network Card with network address 00167611C633.
The IP address being used is 169.254.7.81.

Can you help me please? I appreciate a lot all your help

thank you very much,

best regards,

Leo
Costa Rica
 

More replies
Answer Match 47.04%

on my computer i had 3 internets (IE 8, firefox and Safari).
a month ago firefox stopped working so i uninstall it and reinstalled it but it still didn't work.
then last week IE 8 stopped working so i reinstalled it, still nothing.
I need to find out what is wrong with my computer before Safari stops working.

P.S. i have another computer and all Internets work on that.

More replies
Answer Match 47.04%

Hi all!!

I have a problem with my connection in my home. In the even log said:

19 July> The IP address lease 192.168.2.101 for the Network Card with network
address 00167611C633 has been denied by the DHCP server 0.0.0.0

I reset my Lynksis and install again my wireless, but dont work yet. the message is:

Your computer has automatically configured the IP address for the
Network Card with network address 00167611C633.
The IP address being used is 169.254.7.81.

Can you help me please? I appreciate a lot all your help

thank you very much,

best regards,

Leo
Costa Rica
 

A:dont work my wireless

If your network is encrypted, disable encryption on the router and try to connect. If successful, re-enable the encryption and reconnect.
 

1 more replies
Answer Match 47.04%

So I have a NEC DVD Burner and a SONY regular CD drive. First thing is the NEC DVD Burner. I just built the computer and like before windows starts up this drive works and opens and everything. But when right now as im typing this, I press the button and it does nothing. And the regular Sony drive has been working the whole time untill recently when I put a CD in to install something, there was no D Drive. Please Help!
 

A:D Drives dont work!

Building a computer from scratch can be quite frustrating.

Have you checked the jumpers on the back of the drives? You could set the CD and DVD drives' jumpers to "CS" (for cable select). If that doesn't work, set jumper on the drive on the end of the cable to "Master" and the other drive jumper to "slave". First, you will have to power-down your computer and detach the drives from their mountings before you can access the jumpers. There should be a label on the top of each drive showing the various jumper settings.
 

3 more replies
Answer Match 47.04%

i downloaded one of these anonymuse proxy programs before but it dont seem to work! when I enable it & then try to log on to any chat site .....I CANT! Any tips ? or different proxy type programs to try?
missmouse
 

More replies
Answer Match 47.04%

my web cam does not work i have.dell latitude E5530. do i need a driver or how do i diagnose the problem.it worked once but after repaired it dont work

More replies
Answer Match 47.04%

Hey, so lately none of the microphones that i connect work on my computer, they work fine on other computers but not this one, before it all worked perfectly, im not sure how to fix or what even to do with this? any suggestions?
 

A:All microphones dont work?

Buuump, can anyone help?
 

2 more replies
Answer Match 47.04%

Hello,

I'm usually able to solve these types of issues with computers in about 10 minutes but this one has me stumped!

Basically, out of the blue, the computer has stopped internet access all together. Wireless and LAN do not work and come up as "unknown network." When doing ipconfig /release and ipconfig /renew i get the following error:

Unable to connect to your DHCP server. Request timed out.
No operation can be performed on wireless network connections while it has its media connected.

When i type ipconfig, the Autoconfiguration IPv4 is 169.254.136.194 and we use a linksys router with the 192.168.xxx.xxx configuration.

I've tried to use a tcp/ip resetter, reinstalled cipset (contains network driver), safemode with networking doesnt work, new user account, checked ipv4 settings and they are good, dns is set to automatic, and installed service pack 1.

I'm so lost with what to do now that im thinking reformatting is probably the only way to fix this.

More replies
Answer Match 47.04%

i recently built a computer with the biostar 6100-m9 mobo. I installed windows xp pro w/sp2. and i have installed all of the drivers.



my problem is this: only one of the the usb ports works (well mostly). there are a total of 8 available ports, 4 back, 4 front. right now i have 4 back, 2 in front (my case only supports 2). anyways when i plug a device into the front ports it says "unknown device" or "device not recognized". i thought maybe that i set the jumpers incorrectly, but then would it even see the device? when i plug a device in the back ports all but one do nothing. the one closest to the nic works, well it works in tbe way of plugging it in and it sees it and when i unplug it, its as if i never did it still thinks it connected. i even tryed safely removing the hardware... to no avail....

i uninstalled the usb "universal serial bus controllers" - everything inside of it. i restarted and windows reinstalled it and applied drivers to it...
it still does the same thing....

does anybody know why it does this, and/or how to fix it?
help would be greatly appreciated...

A:certain usb ports dont work

Hi

Firstly, depending on the device, go through Add hardware Wizard to detect it and see what happens then. If its not picked up by the OS and its drivers are not installed, it won't be recognized.

If they're onboard ports, they could also be naft by damage.

The device you're attaching can also be a USB 2.0 device whereas your ports are USB 1.0 and that way, it will not be recognized.

Anyway, can you check in Start>Run>type: devmgmt.msc and hit enter, under "USB Controller"> "General" and "Resources" tab to see what it says about if the device is working properly and if there are any conflicts please.

Let us know what you get.

3 more replies
Answer Match 47.04%

so basically my router had been turned on,and it worked fine until a few days ago when it just dropped out from connectivity,ll the lights were correct on the router,but none of them flashed,i tried to connet it to my laptop,but the network wasnt on there,what do i do? any helps is appreciated

Sam
 

A:net dont work without ethernet?

16 more replies
Answer Match 47.04%

Hi, i edited this message coz i figured a way to fix it. I would really like to thank you guys fo helping me out. If i hadnt surfed around, i wouldve just left the pc to the mutating bugs

Thank you so so much!!!! ))

sarah

A:Some programs dont work

Happy to hear you got it fixed.

1 more replies
Answer Match 47.04%

hi all

my problem is as follows

i wus playing "Rift" with a geforce gts 250... played it for couple of weeks when suddenly while i wus playing my screen goes BLACK
(i didnt do anything in particular)

the computer also kept on beeping.... so i shut it down with the power button...

when i restarted pc a bit later.. no more image .. only a black screen.
my 1st tought.... gfx card fried...

later on a friend of mine comes by with 3 other cards.. 2 new ones (also geforce gtx but dunno what model exactly) and an old ati eax 600xt...

now the point is we tested the three cards and only the 600xt works.. the 2 others give the same black screen.

they were all tested in the same pci slot...

any toughts?

thx in advance

A:old gfx cards work ... new ones dont...

  
Quote: Originally Posted by hostile


hi all

my problem is as follows

i wus playing "Rift" with a geforce gts 250... played it for couple of weeks when suddenly while i wus playing my screen goes BLACK
(i didnt do anything in particular)

the computer also kept on beeping.... so i shut it down with the power button...

when i restarted pc a bit later.. no more image .. only a black screen.
my 1st tought.... gfx card fried...

later on a friend of mine comes by with 3 other cards.. 2 new ones (also geforce gtx but dunno what model exactly) and an old ati eax 600xt...

now the point is we tested the three cards and only the 600xt works.. the 2 others give the same black screen.

they were all tested in the same pci slot...

any toughts?

thx in advance



Can you fill in your system specs please.

Regards
UKMedia

4 more replies
Answer Match 47.04%

um i have a question i heard that you can download drives like cd drives i have a dvd rom drive 16x and a CD-RW GRAY BULK 16x 10x and 32x. plz help i cant find the right driver to make these devices work when i put a cd it doesnt to anything!!!!!!!! i need a software at least any of those 2 please someone please help ok? thanks and another thing if i dont need a software you people can tell me how to fix the problem
 

A:Help Cd Drives Dont Work~!!!

16 more replies
Answer Match 47.04%

I was trying to lower my commit charge but I think I ended my sound thing cause I cant hear anything, my WMP wont play any songs becuase it says my sound device is uninstalled. The log on and off music i can hear though. Just games and WMP like i said.

More replies
Answer Match 47.04%

ok so one day i turned on my computer and my internet browsers didnt work(firefox and IE).
I downloaded opera from another computer and put it on mine and it didnt work either.
I know i have internet because my AIM works.
The only browser that has been working is the browser on Limewire.


I was going to do a system restore but all my dates were erased.

I dont know what to do.
I was going to do a whole system reboot but i dont have the disc that came with my computer anymore. i lost it.
Im running a sony vaio with windows vista.
when i click them to open they open and everything it just says unable to connect to server www.blahblahblah.com

any suggestions?
thank you!!!!

A:browsers dont work.. help!?

Hi, armorzaku. Welcome to TSF!

I'd recommend using Revo Uninstaller (check my signature for link) and then uninstalling Firefox and try reinstalling it. If that doesn't work, lemme know.

12 more replies
Answer Match 47.04%

this is really confusing nad hard to explain but im gonna try my best.

i have an asus pc thats probably 1-2 years old now. it runs windows 8 x64. there is no disc drive or microphone jack which i was super sad about. i purchased several headsets with microphones (but no jack, they were supposed to work without it) and the microphones never worked. even those little apple earphones with the mic on them didnt work.
recently, the absolutely awful quality mic on my pc has stopped working. it just has this weird staticy noise and doesnt pick up my voice. it does this often but fixes itself later on
it's really annoying. i might purchase a usb mic tomorrow and see if that works. it probably wont. but honestly i have no idea whats going on with my pc and the microphone problem.

does anyone know if a usb mic would work, or how to fix my headsets that already come with a microphone (but no jack for it, they plug into the actual headset.)

More replies
Answer Match 47.04%

I did a clean install of windows 7 but now my sd and memory stick pro readers doesn't work. It's a Sony VGN-NR310E. Windows 7 Home Premium 32 Bit.

A:SD Readers dont work

Hi tzman and welcome to SF!
Download and install Sony Setting Utility Series and see if it solves the issue.
If it didn't, right click on computer > manage. Scroll down to Device Manager ( left pane ) and click on it. Is there any item with an exclamation on it or any item named as "unknown device" or something like that?
Hope that helps.
Let us know the results.

3 more replies
Answer Match 47.04%

I love using the apps suddenly they've stopped working. When I click on one it automatically takes me to the regular desktop screen and gives me an error msg, I can only access websites using the regular desktop screen
 

A:Apps dont work

What "apps"? From where do you get taken to the "regular desktop screen"?

I can only access websites using the regular desktop screenClick to expand...

I don't understand. In general websites are accessed via a browser (e.g., Firefox, Safari, Internet Explorer). What is this "regular desktop screen"?
 

2 more replies