Tech Problem Aggregator

Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

Q: Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?

A: Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Answer Match 178.2%

For some time now, double clicking on a folder no longer opens it as usual. Instead, double clicking on a folder causes a separate Explorer Search window to open, with that folder's name under the "search in" tab. In fact, when i right click on a folder, the first and bold-faced option is "search", as opposed to "open". So to open any folder I have to right click it and hit open, which is slow and annoying. I cleaned out my registry, spyware, viruses, everything, and still this problem persists. I also checked the Mouse control panel, nothing there.

Anyone know what's going on with my computer?

A:Help! Double-clicking on folders prompts "search", not "open"

Hi

Open "My Documents", go into Tools>Folder Options and under General>Browse Folders choose Open each folder in the same window. Save that and then goto View>Explorer Bar> and click Folders.

See if its better now.

10 more replies
Answer Match 177%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 172.5%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Answer Match 171.9%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Answer Match 170.1%

When I right click on my C & D drive in My Computer the Open and Explore words in in odd characters and clicking on them does nothing. This happened after I used a USB key on another computer that had these characters. How do I fix this?
 

A:Solved: Right Click C Drive "Open" & "Explore" in odd characters

8 more replies
Answer Match 169.5%

Dear Analyst, when I tried to open my E (Local Hard Disk) drive, it will list down all programs and required me to choose which program to open it.

Thanks for helping!



Deckard's System Scanner v20070905.67
Run by westley on 2007-09-22 22:26:02
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.


-- Last 5 Restore Point(s) --
63: 2007-09-22 14:26:11 UTC - RP214 - Deckard's System Scanner Restore Point
62: 2007-09-22 1331 UTC - RP213 - Restore Operation
61: 2007-09-22 13:01:21 UTC - RP212 - Restore Operation
60: 2007-09-22 12:58:48 UTC - RP211 - Restore Operation
59: 2007-09-22 12:43:12 UTC - RP210 - Printer Driver Microsoft Office Document Image Writer Installed


-- First Restore Point --
1: 2007-06-25 11:29:40 UTC - RP152 - System Checkpoint


Backed up registry hives.
Performed disk cleanup.



-- HijackThis (run as westley.exe) ---------------------------------------------

Logfile of HijackThis v1.99.1
Scan saved at 10:27:52 PM, on 9/22/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\sy... Read more

A:Double left click E: Select "Open with", not "Open"

Bump...

19 more replies
Answer Match 168.9%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Answer Match 168.9%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

A:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

1 more replies
Answer Match 168.9%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

A:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Answer Match 166.2%

here a stumper for me. . . maybe one of you knows how to fix it...

when in my computer, if i double click on any of the drives, it opens up a search window instead of opening the folder! its sooo annoying. I have to right click and select 'open' every time.

if i right click, the menu opens there and 'search' is on the top in bold instead of 'open'.

i dont know how i messed it up, but if you know how to change the default action.
PLEASE HELP!!!

thanks in advance for any help

-kio

SOLVED THANK YOU THANK YOU!
 

A:default action "search" instead of "open"?! (in my computer)

8 more replies
Answer Match 165%

Every time I try to open a folder, it opens into a search box, with no files in it. How do I change it so that it just opens the folder?
 

A:My folders open with "Search Box" when I double click

Click start > run > type regsvr32 /i shell32.dll and click ok.
 

1 more replies
Answer Match 165%

Hi ... When I double click the hard drive in "My Computer" it shows the search feature instead of the contents of hard drive with the folders. I can right click the drive and select open which at that point it will show all the content in the drive but when I double click the drive the serach feature open , Can someone help in getting this back to normal ? Thanks
 

A:Double click C drive open the "search"

Have a look at this thread. http://forums.techguy.org/t407035.html
 

3 more replies
Answer Match 165%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Answer Match 162.9%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Answer Match 161.4%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Answer Match 160.8%

Here's a strange one. All of my DVD-RW drives are appearing as Local Disks when I view them in "My Computer". Moist of the drives in question are external (firewire and USB) however my integrated DRD-RW is also effected. Oddly, all of the drives are fully functional when used for burning/playing media, and they all appear properly in the Windows Disk Management console and applications that would require optical media (burning software and the like). That being the case, I guess this is more in the "annoyance" category as functionality is not the problem. In any case, I have tried all the quick fixes I can think of, i.e.; change drive letters and reboot, uninstall and search for new hardware, disable/enable. In all of the above operations, the drives briefly re-appear in "My Computer", all listed simply as " CD Drive". However, once I've accessed any of the drives they revert to "Local Disk".

This is a rather new W7 x64 PC. Didn't notice anything strange with the drives initially. The problem just sort of appeared after a reboot. Any explanations/suggestions appreciated

Thanks!
 

A:DVD-RW Drives Listed As "Local Disks" In "My Computer"

6 more replies
Answer Match 160.5%

XP Home SP3

I am trying to help a friend.

History
The computer booted only to wallpaper.
Before the wallpaper appeared, a notice with a title bar of userinit.exe - corrupt
C:\windows\explorer.exe is corrupt or unreadable

The only way I could interact, in a very limited way, with Windows was to bring up the task manager using ctrl alt del keystroke combination.

I ran sfc /scannow. No success.

I booted to the recovery console & ran chkdsk /r [ implies p & f ].

Then BSOD, problem c000021a with

Ran chkdsk /r , problem with c000021a, at which point I copied explorer.exe and winlogon.exe from my XP Home SP3 computer to flash drive, removed the HDD from my friend's computer, copied explorer.exe to C:\windows & copied winlogon.exe to C:\windows\system32.

NOW, the desktop [ wallpaper, icons & taskbar appear ]. Hurrah.
But when I try to open the desktop folder "My Documents" Windows' search utility appears.
When I right click on a desktop icon, instead of seeing "open" or "explorer", I see "search".

When I try to open "My Computer" from the start menu, Windows' search utility appears.

start > run
type: explorer.exe brings up Windows Explorer, so I can explore / view files that way.

I am looking forward to your assistance.
RF123
 

A:Solved: "open" replace by "search"

15 more replies
Answer Match 160.2%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Answer Match 160.2%

I have searched to see if this was asked before without any success. Maybe someone has run into this problem before.
When I open "my computer" or "control panel" after I close it...it automatically goes into Internet Explorer as a blank page. Most of the time, when I close the IE blank page...it stops responding and I have the control-alt-delete to "end the program"
Thanks in advance for any help.
 

A:closing "my computer" or "Control Panel" open internet explorer window

Possibly malware - anything openning ie on its own raises an alarm in my books. Post a HJT log to the malware removal section of the forum and let the experts take a look at it
 

3 more replies
Answer Match 158.7%

Hi TechGuy,

I'm having some recent problems on my laptop. When I log-in and start using it, the performance starts slowing down. When I look at the Task Manager, I notice that the task called Explorer.exe takes up a lot of my CPU. In a couple of minutes, I also start getting Internet Explorer windows to pop-up on my screen (I normally use Firefox) with advertisements suggesting that my computer is infected and some software downloads that could help. I recently installed McAfee Total Works, or whatever they call their 10-in-1 software which is supposed to do it all. I ran several scans, and on some of them, if did find and disable the Generic.dx trojan. Even though it claims it is doing something, I don't notice any changes - Explorer.exe continues to bog me down, and the IE windows keep popping up to the point that I cannot use my computer effectively anymore.

IBM T-40 laptop (about three and a half years old)
Microsoft XP-Professional

Any pointers would be truly appreciated!!

Thanks,
Sandjosh
 

A:Solved: "Explorer.exe" process keeps running, IE Windows intermittently open, "Generic.dx"

16 more replies
Answer Match 158.4%

Hi there I have noticed that my drive letters shown in disk management are different from those being shown in "list volume" in the windows recovery console command prompt. Below are some pictures, number one showing my current partition setup with the drive letters and number two-four showing what is shown in "list volume" in the windows recovery console command prompt.

SEE PIC #1 ; SEE PIC #2, SEE PIC #3, SEE PIC #4

NOTE: If I do a "list volume" in a non recovery console command prompt the drive letters are shown as they are shown in disk management.

A:Drive letter in "list volume" WRE is different from "My Computer" Fix?

I believe that is normal since the recovery console assigns letters based on which partition it sees first. It is not aware of the fact that the System Reserved partition doesn't get a drive letter assigned as does Windows.

2 more replies
Answer Match 158.1%

I have some irritating hijackers/adwares on my computer! There are the Home Search Assistent/Search Extender/Shopping Wizard programs that I cannot delete. There is also the about:blank hijacker that keeps taking over my home page. Then, I also see this fake warning about "your computer might be at risk" and that wants me to download a searchclick.cc file or something.

I would appreciate any help.

Here is my HJT log:

Logfile of HijackThis v1.99.0
Scan saved at 1:19:49 PM, on 3/7/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\System32\acs.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINNT\system32\spoolsv.exe
C:\WINNT\system32\javaot.exe
C:\WINNT\System32\Ati2evxx.exe
C:\WINNT\system32\CTsvcCDA.EXE
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\Program Files\Symantec AntiVirus\SavRoam.exe
C:\WINNT\System32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\WINNT\Explorer.EXE
C:\Program Files\Synaptics\SynTP\SynTPLpr.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\PROGRA~1\SYMANT~1\V... Read more

A:"Home Search Assistent" and "about:blank" hijackers have taken over my computer!

Hi there and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem a.s.a.p

Please be patient with me during this time.


We also suggest that you Subscribe to this thread to be notified of fixes as soon as they are posted by our Team. You can do this simply by clicking the "Thread Tools" button located in the original thread line and selecting "Subscribe to this Thread".

regards
alba

4 more replies
Answer Match 157.8%

Windows XP SP2

Ok, I tried some things in other threads but to no avail. But some threads are having my same problems. First this about:blank crap is always my home page even if I change it, as well as these porn links in my favorites list. I've run scans with 5 different virus/ adware scan programs but it doesn't fix it. However, it got even worse-- I can no longer open things like My Computer, My Documents or even Control Panel to try and uninstall software. When I try to open any folder my computer freezes temp. and I get the following message: "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience."

PLEASE Somebody help me. I have hijack this, if that helps. AHHHHHHHHHHH!!!!!!
 

A:Solved: I can't open anything "Dr. wtsn error" & I can't remove "blank: about" adware.

14 more replies
Answer Match 157.2%

My Windows XP, SP2 system has recently developed some problem behaviour:

For example, if I download an executable (say ppp.exe); open the containing folder using Explorer and "right-click" "open" on the file ppp.exe, the executable does not execute. Instead the Explorer window shows an "hour glass" cursor and the Explorer window shows the (not Responding) message in its title.

The only way to recover has been to power off the machine - the Windows shut-down sequence appears to be broken.

Similar behaviour occurs if I "double-click" on the executable.

If I boot Windows XP in safe mode, I find that I can execute the ppp.exe file with success, but this is cumbersome and recently I have been experiencing problems getting into safe mode.

Also, the "Add or Remove" program has stopped working - I get the "hour glass" hang during what should be a normal uninstall sequence.

I would appreciate help in getting my XP system back to working condition.

Thanks.

A:XP hangs on "right-click" "open" of .exe files

Hi,

First try a system restore to before this became an issue. Use this as a guide:
http://www.microsoft.com/windowsxp/u...w_03may19.mspx

Restore the computer to a day or two before this became an issue.

2 more replies
Answer Match 156.3%

I have looked around for help on this issue and havn't been able to find a resolution that works. I think because I havn't been able to find any imformation on my specific issue.

I am one of the most computer literate people I know, so when a co-worker mentioned to me that he was having problems with his computer, I agreed to look at it. His problem was simple, he had a lot of viruses. I have cleared most (however I assume not all) viruses and instinces of spyware. The computer worked fine for a little while while I did some final checks on his computer, then the problems started.
He has a Dell Inspiron 710m Laptop, running Windows XP Pro. (Service tag 8sk8091)
As far as I can tell, he has not added or upgraded it in any way. He only has some basic programs.

I know that the issues might have something to do with his wireless.
He is running the Intel® PRO/Wireless 2200BG.
The computer is getting stop errors (BSOD)

The first one was called DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop: 0x000000D1 amd listed the file w29n51.sys (which upon further study, turned out to be a file related to his wireless.)

I have already updated the drivers and reinstalled the program with the latest versions on the Intel website.

I also noticed (though with not frequent) the stop error with the same name and stop code, but which listed the NDIS.sys file (which upon further study turned out to be a system utility).
and now, I have gotten a stop error of 0x0000000A, (IRQL_NOT_LESS_OR_EQU... Read more

A:Solved: Windows "logs off" after "open with" repair (userinit.exe)

16 more replies
Answer Match 155.4%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Answer Match 155.4%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Answer Match 155.4%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Answer Match 155.4%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Answer Match 155.4%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Answer Match 155.4%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Answer Match 154.8%

Hi, I'm a new-commer and have been following this thread avidly and taking everyone's advice as I too have identicle problem to Chaz and other bloke i.e my PC (XP) is very slow, shows torch when you open "My Computer" for 15 secs, and when I use Explorer takes ages to find a web address so I'm using Firefox which is fine. Been bothering me for months, tried RWnewson's registry and didn't work. i don't have. Created shortcut direct to C drive to bypass "My Computer" delay however while this works, PC is becoming worse as when I move any files from one folder to another within the C drive the PC can;t cope and stops responding. HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanc ed]
"NoNetCrawling"=dword:00000001 anyway.
My computer is not part of a home network nor does it say searching when I open My computer. This did all start when I installed software for new digital camera and webcam. Uninstalled cameras but still runs slow. Bugger.. Help. Tried registry cleaner and various virus killers. There is nothing threatening.
Interestingly when I end process for sychost.exe everything works fine but then Windows closes down in 30 seconds. PLEASE HELP!!!!
You all seem interested in Hyjack this report so here is mine
Logfile of HijackThis v1.98.2
Scan saved at 00:00:20, on 26/10/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2900.2180)

Running processes:
C:\... Read more

A:XP "My Computer" and "Explorer" taking ages to open

assuming you ran spyware and adaware cleanups, i would suggest reinstalling windows..... Windows (every version) will eventually slow down and not respond, act very unstable, not cooperate, and eventually it will commit suicide and give you major blue screens. then the computer has problems booting... a reinstall (a fresh reinstall preferebly) would probably fix it.....

could you post your system specs? that may help a little bit...
 

3 more replies
Answer Match 154.8%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did a SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps... Read more

A:Cannot open "my computer", "control panel" recycle bin, etc

Hello and welcome to TSF

Apologises for the delay getting to your log. The helpers here are all volunteers and we have been very busy lately. If you are still having malware problems, follow instructions below.

=======

You are using an outdated version of Hijackthis. Please uninstall from Add/Remove programs, and delete your current version.

Next, download HijackThis to your desktop

Alternate link

Double-click on the file you just downloaded.
Click on the "Unzip" button to install. It will by default install to the directory - C:\Program Files\Trend Micro\HijackThis

Upon install, HijackThis should open for you.

Should it not open, navigate to C:\Program Files\Trend Micro\HijackThis and double click on HijackThis.exe

1. If it gives you an intro screen, just choose 'Do a system scan and save a logfile'.
2. If you don't get the intro screen, just hit Scan and then click on Save log.
3. Do not post that log, instead, do this next:

=====================================================

Download Deckard's System Scanner (DSS) to your Desktop. Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - main.txt <- this one will be maximized and extra.txt <-this one will be minimized
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt here... Read more

1 more replies
Answer Match 154.8%

Hello everyone,

I've run into an issue that I can't seem to find answer to on the net.

When I open My Computer, Control Panel or any folder no files or directories display, after first there is a green loading bar on the address bar and little magnifying glasses (searching icon) on the left side directories but never displays anything.

The files I can see in other folders are unable to be opened and have white blank page icons next to them.

I can still run application so I'm not sure what the issue is. I ran a scan for virus with nothing found and I have also ran a windows update but have not restarted my PC yet.

Any help would be greatly appreciated, thank you.


PC/Desktop Custom Build

OS Windows 7 Ultimate x64 C

PU Intel Core i7-2600k @ 3.40GHz

Motherboard Asus p8z68-v pro

Memory 12gb

Graphics Card(s)NVIDIA GeForce GTX 560 Ti

Hard Drives
P1: M4-CT128M4SSD2 ATA
P2: WDC WD20EARX-00PASB0 ATA

A:When I open "My Computer" or "Control Panel" nothing displays.

Please run this and tell me the results following option 2 in this tutorial:

SFC /SCANNOW Command - System File Checker

1 more replies
Answer Match 154.8%

So I have this weird thing happening in my relatively fresh install of Windows 10.
Whenever I search for "Check for Updates" or "Windows Update settings" on the search box of the start menu, I get the results that I want but if I press enter or try to click on those results nothing happens.. As far as I know I can click all others search results but those, and maybe others related to windows update.

I can still get updates by going to Settings>Update & Security though.

In my other computers this works fine, and as far as I can tell all the updates are done.
From what I've searched around other people seemed to have a similar issue where they couldn't acess the settings at all which isn't my case. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results.

A:Can't click on "Check for Updates" "Windows Update settings" on Start

Spanker,
.............. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results. .....................

Please clarify what did you mean by "no results".

When sfc /scannow is completed, it will give you one of the following 3 reports....................(paraphrasing)

1. No integrity violation.
2. Found corrupted files and repair is successful.
3. Found corrupted files but unable to repair some of them.

Which one of the above is applicable to you ?

3 more replies
Answer Match 154.8%

Greetings.
So, I would like to remove "Paste shortcut" and "Undo delete" from the right-click desktop menu.
Wasn't able to locate either in the registry.

More replies
Answer Match 154.2%

This afternoon, all of a sudden, I couldn't log into Outlook, Gmail, enter an address in IE or use Google. Whenever I entered a "r" the "Run" box would appear and whenever I entered an "e" the search box would appear. Most of the letters worked OK but a lot of them brought up something else. This has never happened before. I tried using "System Restore" all the way back to 12/31 but that did not help. I have been running ESET NOD32 (it's 97% finished and although it hasn't found any virus infections, it has located numerous errors opening files.)

Then, all of sudden, the situation corrected itself and I was able to log into Outlook and Gmail and use Google.

Has anyone heard of this? l thought I would post this problem to see if there is anything I can do to correct the situation rather that hope that it corrects itself.

Thanks in advance for all suggestions/comments.
 

A:Solved: Keyboard bringing up "Run" and "Search." Can't log into e-mail or use IE

8 more replies
Answer Match 153.6%

I use XP Pro....
I keep my audio files in folders. And I don't know why every now and then when I open these folders all the files show in "Tile mode". I hate that and always convert them all to "List mode". But in a few days they go back to all showing in "Tile mode" again.

Is there a way to make all the contents of folders Always show in "List mode"?
 

A:Make folder contents always show as "List" not "Tiles"?

6 more replies
Answer Match 153.6%

every time i try to open one of this folders a window apears with this content
cant have acces to C:\Documents and Settings\Mike\Local Configuration\{one of these folders} acces denied
this affects my IE i cant download nothing thru IE all my files on that locations i cant set dispaly pictures on WINDOWS LIVE messenger and all thinks that has anything to do with those folders
any suggsestions or idea
hope you can help me
pd ive scanned my computer and its all clean also i cant install windows XP serivce pack 2 im kinda stucked :/
 

A:cant open "temprorary files" "aplication data" "program data"

11 more replies
Answer Match 153.3%

Hello

I have these 2 unwanted icons on my desktop, "Click to find & Fix errors" and " Sportsbook Football". I don't what type of programs they are but they downloaded themselves without my authorisation and I can't get rid of it.

I have run Ad-Aware, Spybot, The Cleaner (trial version), AVG anti spyware, Webroot (trial version),Windows Defender.

I think it was Webroot Spy Sweeper or The Cleaner that removed "Click to find & Fix errors" but it kept coming back.



Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:28:08 PM, on 5/22/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16640)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\Program Files\Java\jre1.6.0_06\bin\jusched.exe
C:\Program Files\Apoint\Apoint.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Apoint\HidFind.exe
C:\Program Files\Apoint\Apntex.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Grisoft\AVG Anti-Spyware ... Read more

A:Help remove "Click to find & fix errors" and "Sportsbook Football"

Hello
Can anyone help please?

Thanks

19 more replies
Answer Match 153.3%

Do you or anyone else willing to help me, know which registry key I would have to manually delete in order to remove the "Move To" and "Copy To" options from my context-menu?

Please help me solve the problems with my registry. I'm using Windows XP Pro (64-bit Edition). The problems started when I tried opening windows by clicking on folders & files, which are listed on my Start Menu:

Whenever I double-click (or right-click on any folders listed on my Start Menu, and then select "Open" or "Explore") to open files listed on the menu, the "Move To" & "Copy To" windows pop-up.

The "Move To" & "Copy To" windows won't go away, unless I click on "OK" or "Cancel". And now that I have the lastest stable-release of WinRAR installed on my XP, the "Move To" and "Copy To" options aren't listed on my context-menu, anymore. However, I can't open any of the folders I want to access via my Start Menu because my registry is still setup to make the "Move To" and "Copy To" windows appear. And now when I click on "OK" or "Cancel" on each of those windows: none of the folders I wanted to open appear.

The previous owner of my PC configured the registry to make the start-menu & context-menu include the "Move To" & "Copy To" options. So whenever I click on an option in the start m... Read more

A:Why do the "Move To" & "Copy To" windows appear when I click on Start Menu?

Sorry, I have no idea how to fix your particular issue. But, the way to avoid this kind of problem is to immediately format the disk and install the operating system fresh when taking possession of a previously owned computer.
 

2 more replies
Answer Match 153.3%

Hiya, I could use a little help resolving what should be a simple problem. It's really a long story, but to skip to the important part, I'll just recount this little tale:

I wanted to delete some files off of an old external hard drive to make space for some new stuff. It didn't matter, since the files I was deleting had been long since copied to a new drive. However, Vista, in its infinite wisdom, told me I couldn't delete the files, and it was for my own good. I politely said, "okay, Vista! Thanks for keeping me honest!"

But then I muttered, "I already have a mother" under my breath, and proceeded to go behind Vista's back and turn off User Account Control so I could delete the files anyway. Well, I knew that wasn't the best idea, so I immediately turned UAC back on afterwards, but it was too late. Vista caught me, and after the second restart, smote me with a problem I'd seen once before: nearly every program on my computer was said to have been closed after it "encountered a problem" or some nonsense, and when restarted again, the disk checker was run, found numerous problems, and did whatever it had to do to go about fixing them all.

Now I'm not sure what all that was about, because everything seems to be running okay now, save for one minor thing. That little "click" sound you get when navigating windows explorer was nowhere to be heard. I tried another restart and another disk check, b... Read more

More replies
Answer Match 153.3%

This will be my most problem as i manage current user account in a call center industry.. any one who ca help me..

Thank you!

More replies
Answer Match 153.3%

Hey,

Recently my explorer changed the way i click on folders from double click to open to single to open (same as internet links), i tried to change it back, but unsucessfuly by using the folder option:
1. Change option
2. Change option, back to single click and back to double click
3. Reset defaults
4. Reset defaults in all tabs in Folder Options.

This is driving me nuts, I've been double clicking forever.
Any suggestions?

Thanks
Tricolor

A:Folder option "Double click to open" not resetting

Is this what you did?

Or try Option Two here: Single-Click or Double-Click to Open an Item

1 more replies
Answer Match 153%

Outlook 2003:I'm a massive fan of outlooks Search folders, I receive in excess of 400 emails per day, of which approximately 250 need my attention, even if to reply back and give someone an answer.

A problem I find is that I am so busy with my emails, I often need to clean out my inbox. I do this by setting up basic search folders such as "all emails from my team which are in my inbox only" or "any email sent to me which was part of a distribution list in my inbox only" etc...

This is great for filtering my mail and I would like to create a rule as such:

"All mail within my inbox which has been either replied to forwarded by myself".

I can't seem to find any options and I'm hoping an Outlook guru can help

If you don't know the answer, can you try googling it for me to see if you can find anything, loads of heads are better one...

Thanks in advance
 

A:Outlook 2003 - Search Folder: viewing "replyed to" & "Forwarded" mail

52 views and no replys? - come on guys I thought this stuff was easy for you lot
 

1 more replies
Answer Match 152.4%

Hi every one,
I have Intel "DG31" and "core 2 do"
Program hangs, when i try to open or save as a file In "excel-2003" and "corel draw9" and "WILCOM Es9"
and in task manager it shows ?not responding?
But when i try to open it by clicking on the file using windows explorer it works quite well.
Earlier i used same programes on the "865glc" and "2.4" there was no problem,
I have also tried many Intel computers to trace the problem
i found the problem on every computer that was build on the motherboard later then Intel 865
Now what to do?
Mohammad Imran

More replies
Answer Match 152.4%

Made a HUGE mistake, messed with the settings under "My Computer" > "Manage" > "Services> and also the "Local Users". Now having trouble, can not see my "Start and Task Bar", the "windows"+ ''e" is no longer working.

How can I restore the Services & the Local Users account without having to reinstall my whole computer? I am afraid I will loose lots of files... I do not remember what exactly I changed, but some of the "Services" I changed to "disable" now when I try to open properties and change them back, I am unable. The right click to get to properties is not working.

Your help is highly appreciated.

A:How to restore the defaults for "services" under "My Computer" > "Manage>

I am not sure about the "quick" way of restoring, but what you can do is go back to services, "RIGHT-CLICK" the white area select "HELP" then the third option is "Default settings for services"

you can see what the default was and manually restore it. I have tried to copy and paste it below

==========================================================

Service Startup Type Log On As Additional information
Alerter Manual Local Service
Application Layer Gateway Manual Local Service
Application Management Manual Local System
Automatic Updates Automatic Local System
ClipBook Manual Local System
COM+ Event System Manual Local System
COM+ System Application Manual Local System
Computer Browser Automatic Local System
Cryptographic Services Automatic Local System
DHCP Client Automatic Local System
Distributed Link Tracking Client Automatic Local System
Error Reporting Automatic Local System
Event Log Automatic Local System
Help and Support Automatic Local System
IMAPI CD-Burning COM Manual Local System
Internet Connection Sharing Manual Local System
IPSec Services Automatic Local System
Logical Disk Manager Automatic Local System
Logical Disk Manager Administrative Service Manual Local System
MS Software Shadow Copy Provider Manual Local System
Net Logon Automatic Local System
NetMeeting Remote Desktop Sharing Manual Local System
Network Connections Manual Local System
... Read more

3 more replies
Answer Match 152.1%

RE:
Installing "Search Engine" and "Visitors' Counter" on my MSN Forum board.

A typical MSN Group Forum looks like this,(below) where in da left column, are all the
"activity menus" commands available.

Example:

http://groups.msn.com/greatgujarat/messages.msnw

Some people can add "search" command ( Only for the posts inside that forum ) and also visitors indicators ( how many ppl visited da forum) on their forum Boards, and I always wonder...
How do they do that?

I also monitor one MSN group and I need to do those.

Pl. Advise me step by step, as I am novice and I will highly appreciate it.

Thanks all.

A:Installing "Search Engine" and "Visitors Counter" on my MSN Forum board.

bravenet.com is good for people who dont know any computer languages i used it once upon a time its free you can get your post counters small search bars and what not there

1 more replies
Answer Match 152.1%

This is a resurection of an old unresolved Vista Post, and it also happens in Windows 7.
====================================
Original subject - Start Menu - program search issue
I use Windows Mail for my daily email tasks, and would like to be able to
open the program by using the vista search bar built into the start menu. The
problem is, when i search for "mai" it brings up Windows Mail, and I can hit
enter and load the program. However, when I search for "mail", it returns:
"No items match your search." I have it set to index both the start menu and
my programs directory, and have even tried to rebuild the index.

It seems kind of strange that Vista would recognize that when I type "mai" I
want my mail programs, but when I actually type "mail", it gets confused...
and this in turn has -me- confused.
====================================
and
====================================
Oh thank goodness, I've finally found someone else with the same problem.
The word I have issues with is "photo" ("phot" works great, but no results
for "photo"). Not a show-stopper, but WHY!?
====================================

I've noticed the same thing with Windows Desktop Search in Windows 7. After some experimenting I think I have the reason why, but not a fix.

It seems to em that mail and photo are probably used as "kind =" prefixes in Windows search, and even if you enter photo with out ... Read more

More replies
Answer Match 152.1%

Here is my hijack log file ::

++++++++++++++++++++++++++++++++++++++++++++++

Logfile of HijackThis v1.98.2
Scan saved at 20:53:27, on 16-9-2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\Grisoft\AVG6\avgserv.exe
C:\WINDOWS\System32\DRIVERS\CDANTSRV.EXE
C:\WINDOWS\System32\inetsrv\inetinfo.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\System32\snmp.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\mqsvc.exe
C:\WINDOWS\System32\mqtgsvc.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\SOUNDMAN.EXE
C:\Program Files\Logitech\iTouch\iTouch.exe
C:\PROGRA~1\Logitech\MOUSEW~1\SYSTEM\EM_EXEC.EXE
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb04.exe
C:\Program Files\Winamp\Winampa.exe
C:\PROGRA~1\GUITAR~1.18\uninstall.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\PROGRA~1\Grisoft\AVG6\avgcc32.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\Microsoft ActiveSync\WCESCOMM.EXE
C:\WINDOWS\System32\ctfmon.exe
C:\Program Files\Plextor\PlexTool.exe
C:\Program Files\Microsoft SQL Server\80\Tools\Binn\sqlmangr.exe
C:\Program Fil... Read more

More replies
Answer Match 152.1%

Hello all,

I have a problem with my Windows XP, and the problem is like the title says, Why when I Open(double clicking) My Computer icon on desktop, it displays searching "Flashlight" icon rather than browsing or showing my folders and drives?

Do you guys know how to fix it?

Thanks.
 

A:Solved: Open(double clicking) My Computer Opens Searching "Flashlight" Icon

Just googling and found the solution. It's because a Windows service called Windows Image Acquisition (WIA), the solution is by stop and then disable this service from control panel --> administrative tools --> services.
 

1 more replies
Answer Match 151.8%

hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane

A:Remaking "My Music", "My Pictures", "My Videos" folders

  
Quote: Originally Posted by Legume


hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane


You have a backup from before the problem started? a win 7 dvd to do a repair install?
ken

4 more replies
Answer Match 151.8%

Hi:

Looking for insight/advice re: KB3054476.

According to Infoworld, it was "Optional" in May, but I was not offered it then.
This week, it was offered as "Important" and "Recommended" (!), but only for one of my 2 Win7/64 boxes.

I have read the MS KB article, as well as THIS FORUM THREAD, the latter of which includes a report of a BSOD due to this particular update.

However, there isn't much out on the web about it.
And most of the discussion about it is overly technical for me.
And I am confused as to why it was previously offered as "Optional", but now is "Important" or "Recommended".

I don't *think* I "need" it (as I have no webcam on this box). And I don't like to tempt fate by fixing things that are not broken.

So, 3 questions:
Is it safe to install?
Is it really necessary/important?
Or would I be OK to hide it?
Thanks very much in advance!

A:KB3054476 offered as "Important"/"Recommended"/"Optional"

The status of updates changes with circumstances.
If an update isn't relevant, it won't be offered at all.
If however it's relevant but the related software is not apparently in use, it may be 'optional' - and gravitate to 'Recommended' or 'Important' if the related software is in use.
It can also be promoted through the hierarchy by MS depending on feedback through WU and error-trapped feedback.


If you have (and use) a webcam, then it's probably best to install the update.

4 more replies
Answer Match 151.8%

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

A:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

3 more replies
Answer Match 151.8%

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

A:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

1 more replies
Answer Match 151.5%

HI,
i got infected with "vbs" through someone's usb, i ran "Flash_Disinfector", then installed "kaspersky 7", scaned the whole computer, it also deleted vbs trojan. However, after that when i tried to open my computer by clicking on its icon, it did not open, i tried to open it fron strat up, but the result was same. all others like my documents etc were all right, i open my computer through my documents, opened my c drive, when i tried to open further any folder present present in the C drive it gave me the error ( i am including the error meggage in attachment), howerever all my folders were not having any shortcut sign & it was same with all folders present in all my drives, but when i wrote the name of the folder in the address bar, it opened normaly, so now i cannot open my computer through its icon plus all the folders present in my hard drive. please help me to sort this thing out.

A:infected with "vbs", used "Flash_Disinfector" & folders on hard drive unable to open

Hello and Welcome.

We want all our members to perform the steps outlined in the link I'll give you below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

---------------------------------------------------------------------------------------------

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

1 more replies
Answer Match 151.5%

I just resolved an issue I had with the wireless connectivity of my Acer notebook computer and now I am getting strange error messages. When I try (not every instance) to open device manager I will get the message "Failed to open empty document." From there I will occasionally get "Parser" messages that say "Value creation failed at line 843" or "line 422." I read what I could find about these messages and it points to MMC as the cause. How do I go about fixing this annoying problem if anyone knows?
 

More replies
Answer Match 151.5%

infected with "vbs", used "Flash_Disinfector" & folders on hard drive unable to open
________________________________________
HI,
i got infected with "vbs" through someone's usb, i ran "Flash_Disinfector", then installed "kaspersky 7", scaned the whole computer, it also deleted vbs trojan. However, after that when i tried to open my computer by clicking on its icon, it did not open, i tried to open it fron strat up, but the result was same. all others like my documents etc were all right, i open my computer through my documents, opened my c drive, when i tried to open further any folder present present in the C drive it gave me the error, that is,this item "1002931234.vbs" that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. Do you want to delete this shortcut? Howerever all my folders were not having any shortcut sign & it was same with all folders present in all my drives, but when i wrote the name of the folder in the address bar, it opened normaly, so now i cannot open my computer through its icon plus all the folders present in my hard drive. please help me to sort this thing out.

dds


DDS (Ver_09-12-01.01) - NTFSx86
Run by Nadeem_Ahmad at 14:54:49.54 on Sat 03/13/2010
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professional 5.1.2600.2.1252.1.1033.18.1975.1542 [GMT 8:00]

AV: Kaspersky Anti-Virus *On-access scanning disable... Read more

A:infected with "vbs", afte "Flash_Disinfector" all folders on hard drive don't open

Hello buct,

It will require more than 1 round to clean the system. Please stay with me until given the 'all clear' even if symptoms seem to abate.

Download ComboFix from one of these locations:

Link 1
Link 2


* IMPORTANT- Save ComboFix.exe to your Desktop

====================================================


Disable your AntiVirus and AntiSpyware applications as they will interfere with our tools and the removal.


====================================================


Double click on combofix.exe & follow the prompts.

As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this pre-installed on your machine before doing any malware removal. It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.

Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.

**Please note: If the Microsoft Windows Recovery Console is already installed, ComboFix will continue it's malware removal procedures.




Once the Microsoft Windows Recovery Console is installed using ComboFix, you should see the following message:





Click on Yes,... Read more

10 more replies
Answer Match 151.5%

I installed some software to assist me in converting .pdf docs. I didn't keep the name of the software but did uninstall it via control panel.

I now have mulitiple "File" menu entries: 29 entries between "open" and "save". The entires are all idenical, "Open PDF"

Nothing happens when I click on them. How can I remove them from my "File" menu?
 

More replies
Answer Match 151.5%

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

More replies
Answer Match 151.2%

I have a Sony Vaio Notebook running a Windows XP (Pro) operating system.
The Notebook cotains 2 drives. A "C" drive and a "D" drive.
I would like to add the "D" drive letter to the drop down menu of the "Send To" button.
Can anyone help me with this?

Thank you very much.
 

A:add a "drive letter" to the "send to" drop down list

Place a shortcut to the drive (or folder) you want to be the target in c:\Documents and Settings\"Your User Name"\SendTo folder. That is the directory from which the Send To menu is loaded. I'm looking at a win2000 system and the XP location may be slightly different but it's somewhere in there. If you put the shortcut in the "Default User" folder then whenever you create a new user, that user will have the same option.

Welcome to TSG -- stay a while.
 

2 more replies
Answer Match 150.6%

Hi, I need to find a fix for this issue I have with a change in Windows 8. I am running Windows 8 Pro and normally (in windows 7 and older) when I Right click on a folder, the default option for properties is "r". Nice and quick and next to my
left hand which rests on the left side of the keyboard. Now it has changed to "o" and not only that, there are 2 options for "o". Open and Properties. Very frustrating and not very easy to get around. Any way of getting around this whether
it be alternative software or reg hack or something... anything. Itsvery annoying.
Cheers

A:Right Click on folder and select "R" for Properties has changed to "O"

Well it looks like the US version oif the upgrade iso/cd is the version that has the r has properties. UK version is O which really doesnt make sense as open is O aswell so you have to press it twice then enter. I like my keyboard shortcuts so US version
is. Problem solved. language to install must read US (English) on the install screen.
Prolem solved
cheers all for your assistance.

12 more replies
Answer Match 150.6%

Ok, now I get another problem... When I click "install now", I get a msg box that is saying 'no device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK'

What should I do now?

A:When I click "install now", it's saying "No device drivers were found"

Is the HD showing in BIOS?

Can you post your specs.
Filling out System Specs
Dont Know What Hardware You Have..??
VistaForums SysInfo Tool - Vista Forums

9 more replies
Answer Match 150.6%

Windows 7 Pro, 64-bit, boots up and runs fine as long as "Windows Search" is NOT checked in "Services".

When I run msconfig in the Services Tab, that is the Windows Search checkbox that I'm talking about.

If the box is checked, computer will start up, allow me to click on my user icon and load everything as if it's ready to go. The cursor moves with the mouse but does not respond to mouse clicks, also the computer does not response to the keyboard. If I click the start button, I get the spinning round wait icon (or whatever that is called). It also runs fine in Safe Mode.
I tried sfc.exe /scannow I have all the latest windows updates. I have run several different anti-virus, anti-malware programs. I ran chkdsk. Do I need Windows Search checked in Services? What does Window Search do? Is that where you can search from the Start Button area?

A:boots up then freezes when "Windows Search" is checked in "Services"

Which flag did you use with chkdsk - /F ?? My first guess is that Search is trying to index and snagging on something - either a file system problem or bad disk sectors. The /F flag deals with the filesystem. If you haven't tried /R, for sectors, do so, but only after backing up important data, and perhaps taking a system image if the system's current state is valuable to you. I prefer to run chkdsk from a WinPE/RE boot disk so I can study its output at leisure.

9 more replies
Answer Match 150.6%

I have some kind of malware on my system and I need help to remove it.

Symptoms: After performing a web search using google and click my desired site, my browser is usually redirected to one of the following sites: zapmeta, netster, romemaster, stopzilla, toseeka. It's different everytime.

What I've done thus far: I've run Spybot and Ad-Aware during a "safemode" session. These found a lot of "threats," which I removed. This did not fix the problem. I then tried to restore my computer to an earlier date, but that failed.

Any help would be greatly appreciated, thank you.
 

A:"Zapmeta" "Netster" search engine IE redirect problem

8 more replies
Answer Match 150.6%

Hi!
I use Yahoo search engine and everytime I try to search for anything lately, in the search results, in addition to the words I entered, "200" and "YST" are highlighted as if they were entered in the search perameters when they weren't, thus limiting and completely screwing up what I am looking for. Can anyone help? Thanks in advance!

Here's my HijackThis log:

Logfile of HijackThis v1.97.7
Scan saved at 10:24:55 PM, on 8/19/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\Program Files\Norton SystemWorks\Norton Utilities\NPROTECT.EXE
C:\WINDOWS\system32\pctspk.exe
C:\PROGRA~1\NORTON~1\SPEEDD~1\nopdb.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\wanmpsvc.exe
C:\WINDOWS\System32\WFXSVC.EXE
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\System32\wfxsnt40.exe
C:\Program Files\Microsoft Hardware\Keyboard\type32.exe
C:\Program Files\Microsoft Hardware\Mouse\point32.exe
C:\Program Files\Pop Up Stopper and Ad Killer\pusak.exe
C:\Program Files\Java\j2r... Read more

More replies
Answer Match 150.6%

Sometime over the last few weeks Google's "More" drop-down and its "Search Tools" menu items have quit working in IE10. The other buttons that let you select web, images, shopping, etc. still work properly.

The "More" and "Search Tools" buttons get focus when the mouse is over them and they animate when clicked but nothing happens. I have Google Chrome and Apple's Safari installed and the buttons work properly on these browsers.

I've googled it but most of the posts found are about a not-quite-the-same problem of the buttons just working momentarily. At any rate, I tried the fix [clearing cache and cookies] that some of the posters said worked but it didn't make any difference.

I've disabled all of the ad-ons and the problem is still there. I re-enabled each add-on one at a time and tried it but none of them had any effect.

I've disabled my Norton Security Suite and the problem still exists.

I've reset IE and, other than losing all of my saved passwords, it too made no difference.

I think this might be a useful clue.

I noticed that for all of the buttons that are working, when I pass the mouse pointer over them it displays a URL down in the status bar. However, for the two that are not working nothing is displayed. It appears that the controls associated with these buttons either don't exist or are being blocked.

Does anyone have the solution for this, or at least and idea of what the problem is?

Thanks in advance for ... Read more

A:Google "More" and "Search Tools" buttons no longer working...

Hello Howard,

you can observe one thing here. All the menu items are just links. But More and Search Tools menu items are different. More is drop down menu and Search Tools also kind of drop down but with sub menu items.

So it seems like there are some script errors with your IE 10 browser.

But i am sorry, re installing IE is the only option i can suggest.

4 more replies
Answer Match 150.3%

When attempting to browse folders using Explorer opened from Start Menu Or left click on start button, Explorer will allow click on "-" to close paths, but hangs with hour glass if any attempt is made to expand any path or open any file. Explorer remains in this state until closed, at which time Windows asks if I wish to report the problem to Microsoft.
If I use the "My Computer" icon on the desktop to browse, all actions including access to networked resources work perfectly.
Can anyone please explain the difference between the two file browsing utilities and offer an explanation of the above?
My system is: AMD 3000; 2GB Ram Xp Pro with all service packs and updates. I am on a wired network with fixed IP addresses. Other network components are: Old Dual P350 with 0.5GB Ram running Windows 2000 (Explorer on this machine has no problems including access to networked resources); Buffalo 1TB Link Station; 2Wire ADSL router and HP LaserJet 1100 printer.
 

A:Solved: "File Explorer" hangs, "My Computer" does not?

8 more replies
Answer Match 150%

OK guys, im kinda new to this forum, so... hello.
My computer has a not so serious problem-When I try to open Local Disk C by double clicking it says:
"
Windows cannot find install.exe.
This program is needed for opening filed of type 'File'.

Type in the executable file to be used instead:
_______________________________________
"

This problem isnt very serious, I just dont want my computer to remain "corrupt" if you know what I mean.

Help my and I will be grateful!

A:Cant open C:/:"Install.exe is needed for opening type of "file""

Hello and Welcome to TSF

Have you scanned your system for viruses lately? What antivirus program is installed on your system?

4 more replies
Answer Match 150%

safe to assume its impossible to remove the "open" and the "merge" entries from the context menu? I figure if i want to open or merge them i would simply double click. Clutter and redundency in this vein dont suit me :P

A:remove the "open" and "merge" entries from context menu?

Open I don't think so, Merge sounds like it is added by a 3rd party program, and likely can be removed. Have a look at ShellMenuvVew and ShellExView from NirSoft. You can remove entries with both. But Open will not be listed, and I have seen no way to remove it. A Guy

2 more replies
Answer Match 150%

In any application under Win XP, when I use a Save As or Open dialog box, and click the down arrow next to the location box to search for the folder I want, the application never responds. Usually, I have to click the arrow a couple of times and then it sort of wakes up and responds, or the application crashes (the title bar of the dialog box will say "Not Responding".

Often, in the case of the Save As dialog, it won't say Save As in the upper left corner, only an "S" will appear there.

Seems like a memory issue or else something corrupt in the system. Before I shell out $35 to MS to have them fix something that shouldn't be broken, can anyone help???
 

A:Sluggish/nonresponsive "Save-As" and "Open" dialog boxes

15 more replies
Answer Match 150%

Using Word 2007, I am unable to pin the "New" and "Open" Word Document to the Start Menu. I was able to do this in XP and Vista. I go to "All Programs" and can load Word but cannot find the options new/open. In Word I go to "Word Options" and it is not listed there either. Thanks.

A:Pinning "New" and "Open" Word document to start menu

  
Quote: Originally Posted by ADKR


Using Word 2007, I am unable to pin the "New" and "Open" Word Document to the Start Menu. I was able to do this in XP and Vista. I go to "All Programs" and can load Word but cannot find the options new/open. In Word I go to "Word Options" and it is not listed there either. Thanks.


ADKR,
I note that you have posted this question in Microsoft's Discussion Groups - Windows 7 - Word 2007 in Word General Questions.
Some reasonable replies were given to you that you didn't respond to. Did you actually try them?


This Tutorial written by our Brink would seem to be a reasonable alternative for you to use.
Quick Launch - Enable or Disable

1 more replies
Answer Match 150%

When I press "open file" in the program "Business Intelligence" of an Office
program like Excel, I would like the window columns to be in "detail" view
instead of "list" view.
How can I do this?
Is this a registry default that can be changed?
Thanks,
Josh
 

A:Get "detailed" view on "open file" dialog window.

7 more replies
Answer Match 150%

when i right click on my DVD writer i do not get the options "OPEN",EXPLORE & AUTOPLAY"..How do i bring them back?
 

More replies
Answer Match 150%

Hello guys,

I don't know what I did, but nothing happens when I click on those two things in the search bar:

View image: wtf

I reinstalled Windows a few hours ago, and IIRC pressing those with the mouse lead somewhere. Now when I click on them, it does nothing. I have to type in "Settings", so I can click on the actual Windows App. Then I can navigate to those settings. IIRC those results were "clickable".

Can somebody help?

Thanks in advance!

A:Can't open "Windows Update Settings" or "Check for Updates"

Hello iamnewhere,

If you like, here's a Windows Update shortcut to use for now until hopefully an update will sort it for you.

Windows Update Shortcut - Create in Windows 10

3 more replies
Answer Match 149.1%

How can I make it such that in Search Results, when I open a folder in a new window (by right-clicking a file), I will be directed to a window with the "full path" displayed in the address bar, instead of Search Results\"Path" or Search Results>"Path"?
Edit: "Right-click -> open file location" will open the file location and have the full address displayed. But that doesn't solve the problem if I have more than one result that I need to go to and check.

A:Open a new window with "full path" instead of Search Results\"Path"

See if this works, from the control panel, click on Folder options > View tab > check the box that says "Display the full path in the title bar" (classic theme only)

9 more replies
Answer Match 149.1%

The hard drive is a Western Digital 320 GB that I've had plugged into this computer before (and worked). Then i got a virus and had to do a recovery of windows.

Ever since then I can't get windows to recognize/show it in my computer. I just "disabled" and "enabled" it in device manager to no effect. I have a C, D, and E drive which are: two partitions on the hard drive, and then the CD drive (respectively).

So i'm stuck, not sure where to proceed since it's obviously not the hard drive itself, I use it on my xbox all the time. What next?

A:External Hard Drive doesn't show up in "my computer" but does in "device manager"

Does it show in Disk Management ? ?
Right clik My Computer...select Manage...then Disk Management.
Find the drive...right clik it and select Properties.
Report back with your findings.

15 more replies
Answer Match 148.5%

This has been happening the majority of the time for the last week or so. I've scanned for viruses, spyware, etc., but that isn't the problem. Whenever I try to save as, nothing happens. The hour glass comes up for about a half a second and then nothing happens. The same when I try to click browse or when I try to open a file, like pictures. This has never happened before except the last few days. I had a problem with spyware, but I've since installed zone alarm and firefox instead of IE explorer, which I had to do because I was getting an error on IE and it wouldn't open. I hope someone can help. Thank you.
 

A:cannot "save as," "browse," or "open."

Welcome to the forum.

1. Which version of Windows, to include SP?

2. Did the problem begin after installing / removing hardware / software, to include updates to AV & Windows?
2a. When was Windows last updated?
2b. Is your computer set to obtain Windows updates automatically?

3. Which tools did you use to scan for malware?

4. Can't save as, browse or open. Please explain. For example, what can't you open? Can you open notepad, type a few words, then save the file?

5. What kind of problems were you having with IE?

You're welcomed.

RF123
 

1 more replies
Answer Match 148.2%

I am hoping that someone can help me with what may be a complex question.

I have a spreadsheet, similar to the demonstration file I have attached. In it, there are a range of columns. One set of columns (A - D), shows a list of numbers that are references to items in a store, and it also shows their location in the store, so it acts as a floor-plan. The next column (E) lists those items again to show the dollar amount that those items have produced in total sales (F).

So, what I'd like to do is to add a conditional formatting to show me the "cold" and "hot" spots on the floor-plan so I can see where sales are most concentrated. I would assume that this would be done with a colour scale (using the range of values in column F to work itself out)?

Either way, the figures in column F would change weekly, so the relevant cells in columns A - D would need to automatically change when they're matching cells in column E - F change.

I hope this makes sense, as it's difficult to explain, but any help that someone could provide would be greatly appreciated.
 

A:Solved: Creating Cell "Cold" And "Hot" Spots Based On Values In Microsoft Excel 2007

16 more replies
Answer Match 148.2%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Answer Match 148.2%

Hello everyone
I have this problem for more than 3 months for now...

The INSTRUCTION AT "0x00a96ce0"referenced memory at "000000000" couldn't be written".

That's always what i get when i restart my computer,just before screen goes dark.
I believe that it has to do something with Microsoft updates.The reason i believe this, is that i once reinstalled my PC and didn't have any problem until i didn't update my PC.
And i posted here that thinking my problem was solved but unfortunately i was wrong.

Please if you have any tips on this one let me know it would be greatly appreciated.

Thank you!
 

More replies
Answer Match 148.2%

I have a chart in an Excel spreadsheet, and it has several "series" in it. Some of the series are charted as "lines", and some are "areas" that fill in the entire background of anything from 0 to the value I have entered.

I have one particular series that is showing up as an "area" but I want it to be drawn as a "line" instead, so it DOESN'T fill in the area below it. I currently have the "background" as "none", but now I have a line from the last value down to "0", and that's what I want to avoid...

Thanks in advance!
 

A:Solved: Excel 2003 - how to change a chart data series from "area" to "line"??

8 more replies
Answer Match 148.2%

I recently built a call log database in Access 2007 for my team to use when calling agents on our top errors we see from a vendor's error report. My boss is requesting a report to see how many items have been resolved

I have a query started and I am trying to complete this task in a single query (if possible) instead of several queries (as I've done for a couple other things).

I have 3 tables I'm using: Assignment, AgtInfo and CallLog
Joins as follows: Assignment.st=AgtInfo.agcy_st
AgtInfo.agt_id=CallLog.agt_id

Fields in the results: Assignment.assigned_analyst, CallLog.rpt_mnth, CallLog.resolved

Resolved is a yes/no field. I've done a query that converts the -1 to a 1, so that the sum is a positive number for the "Yes" values. I'm not sure how to enter the expression to subract the "Yes" values from the total number of values (yes/no) to get to my "No" count.

Essentially, I'd like the results to display as:

assigned_analyst, rpt_mnth, CountYes_resolved, CountNo_resolved

Somehow the connection is just not clicking in my brain with everything I've read though searches. Any help is appreciated! Thanks!
 

A:Solved: Access 2007 Query: Return count of "Yes" and "No" values for Analyst/Report M

It is easier to add another column to counf the Nos, use
0 or is null
as the IIf statement and use a 1 to count them
 

3 more replies
Answer Match 148.2%

Hello Guys and Girls,

My wireless internet connections are currently set to a manually configured status, but this means I am having problems connecting to other wireless connections with free (ie unsecured) connections. I have tried going to properties and ticking the "Let Windows configure my wireless network settings", but I get a dialogue box coming up telling me that not all of my changes have been made.

Any ideas? Thank you in advance.

Sukita
 

A:Solved: Changing wireless connection status from "Manually Configured" back to "Automatic"

Why don't we start with the make/model of the wireless router in use, as well as the wireless adapter or laptop brand. Also, what version and patch level of Windows do you use?

If you have XP-SP2, you can set the machine back to installation defaults using the following procedure.

TCP/IP stack repair options for use with Windows XP with SP2.

For these commands, Start, Run, CMD to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log
 

3 more replies
Answer Match 148.2%

If I open "My Computer" and then I double click on the C: drive icon (or any drive), it opens up a new window with the Search panel on the left. If I right click on a drive, the menu comes up and "Search" is the in bold, indicating it is the default. How can I change this so it is no longer the default, but opening it up with "Open" as the default?
 

A:Explorer Window defaults to "Search" instead of "Folders"

Start> Run> type: regsvr32 /i shell32.dll then hit OK.
If that doesn't work, try this script repair from Doug Knox.
folder_open.vbs
 

2 more replies
Answer Match 148.2%

Using the Windows Classic theme, can the 'All Programs' & 'Search' (which is useless) be completely removed from the Start Menu?
I'm talking about the entry All Programs bar and the Search entry, or can the useless MS Search be replaced with one of the many substitutes?

I do not mean the Search on the right pane.

I do use "all programs auto expander" to solve the annoyance of always clicking on the All programs to get the folders to show, but it would be superior to also get rid of that line all together. Or is this another futile request as it is to get rid of that equally useless Explorer bar??

A:Can the "All Programs/Back" & "Search" entries be removed?

The search bar is so very useful in 7, but to each his own. Try this:

Start> In search box (ironic, huh?) type Turn Windows Features On or Off> When the list loads, uncheck Windows Search> OK

For All Programs, this also applies to 7

Start Menu All Programs List - Enable or Disable

A Guy

P.S. Have you looked into Classic Shell ?

3 more replies
Answer Match 148.2%

Which one should I do? I originally wanted to just do "Return computer to factory condition" but Theog just suggested "Use A System Image Created Earlier." I have no idea what to do. So confusing!

A:"Return computer to factory condition" or "Use A System Image Crea..."

Hello M4TE and welcome to Seven Forums. Sorry for the delay in responding but I just came across your question.

Most newer manufactured computers have a hidden recovery partition on the hard drive. The manufacturer provides specific instructions on how to access that partition in case you want to restore your machine to the exact condition it was in when it left the factory. That means you'd have to go through the time consuming process of cleaning out factory bloatware (like free trials of programs you'll never need), installing programs you do need, updating everything, creating your personal settings, etc. Here is a general idea of how to access the hidden recovery partition.

HP Recovery From Partition

Let's say it took you a day or two to set up your machine to your liking using the hidden recovery partition. A System Image is like a snapshot of your entire hard drive. It will include everything from the operating system to all your programs, files, photos, music, all updates ... everything. Most folks keep it on a separate external hard drive. Let's say a week later you get a virus or your machine crashes for some reason. You can use that System Image to return your machine to the exact condition it was in when you made the image. Usually takes about 30 minutes or so and you're back in business. It's a lot faster and more convenient to only worry about a week of updates compared to probably months with the hidden recovery partition. The newer a System Image is the... Read more

1 more replies
Answer Match 148.2%

I have a big problem here,
I have used my hard disk for 9month,
Yesterday when I watched movie on the half way,
My hard disk suddenly disfuntion,
And I thought my laptop problem due to always lagging so I restart my computer.
But after that I can't read my hard disk (WD)in my computer.
It can read in computer management there.

Ways I try:
1)I try to uninstall and reinstalled again,BUT it doesn't work.
2)I try to unchecked the hide folder and device at view.
3)I try to update the software BUT it still disfunction.
4)I try to use disk management and initialized it BUT there appeared CANNOT INITIALIZED Due to I/O device error.

Any solution for me ?

A:Hard Disk can't read in "my computer ", "initialized",I/O device error

The most usual cause is that the Hard Drive is beginning to fail. Back up your stuff. Go to the website of the manufacturer and test the drive.

8 more replies
Answer Match 148.2%

I am trying to rebuild by search index because my computer won't let me arrange items using the "Arrange By" option... However, when I try and load my indexing options to rebuild the index it will sit there and say "Waiting to receive indexing status". If I click the "Advanced" button it will freeze... I also receive an icon and loading display problem SEE PIC#1. Also when I click on "My Computer" it sometimes will sit there searching and it won't load. SEE PIC#2

I have tried the following:
1. Restarting the "Windows Search" service multiple times at different boots.
2. Deleting the files contained in the folder "C:\Windows\System32\config\TxR\". http://support.microsoft.com/kb/2484025
3. Stopping the "Windows Search" service then I opened up "regedit". I went to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSearch, SetupCompletedSuccessfully" I changed the value from a 0 to a 1. Then I rebooted my PC. I then went back to the same key and changed it back to a 0 and rebooted my PC again.
4. Turning the "indexing service" on and off from the "Turn Windows Features on or off" menu.
5. Microsoft Fixit Indexing Troubleshooter
6. Sfc /scannow
7. Tried this hotfix http://support.microsoft.com/kb/977380
8. Tried another user account and creating a new user account
9. Tried resetting folder view to "defaults" http://www.sevenforums.com/tutorials/15692-... Read more

A:"My Computer" won't load, Disappearing Icons, & "Arrange By" option won't work. Help?

13 more replies
Answer Match 148.2%

Does anybody know how I can change these icons?

I changed the default icon for the network one in HKEY_CLASSES_ROOT\CLSID\{F02C1A0D-BE21-4350-88B0-7367FC96EF3C} but it didn't change.
Appreciate any help,

B

A:Changing "Computer" and "Network" icons in explorer navigation pane

Hello, and welcome to Seven Forums.

If you like, you could use the method in the tutorial below to change the icon of "Computer" and "Network" to what you like, and have it applied everywhere in Windows.

Desktop Icons - Change or Restore Default Icon

3 more replies