Tech Problem Aggregator

"View Tab" in "Folder Options" missing

Q: "View Tab" in "Folder Options" missing

When I click on "tools" on the menu bar in any folder that I am exploring and subsequently click on "folder options" I notice that the "view" tab is completely missing. The only tab I have access to is "file types"

This creates a serious problem when dealing with hidden folders that were hidden prior to me having knowledge of this "view" feature being absent.

What are my options to restore this "view" tab so that I can view the hidden files that I need access to?

TIA

A: "View Tab" in "Folder Options" missing

Other than a system restore, I don't know how to restore the view tab. I can tell you how to enable the hidden files and folders from the registry.
Start> Run> type: regedit and hit OK. Navigate to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\
Advanced
Click on Advanced folder in the left pane and look for Hidden in the right panel. Set the value to 1 to show and 2 to hide.
If not there, create DWORD value with Value name: Hidden and set the value as above.

Edit: Forgot to add, you need to restart computer for settings to be changed.

1 more replies
Answer Match 119.1%

when i right click on my DVD writer i do not get the options "OPEN",EXPLORE & AUTOPLAY"..How do i bring them back?
 

More replies
Answer Match 117.6%

I have had the Ad Watch bug and get the "create an association in the Folder Options" error message when trying to open a program. Nothing will open and all exe.and lnk. files are missing from Folder Options. When I try to create new exe. files and new lnk files, the "apply" button is not highlighted so it will not save. I can make other changes and the button is there but it still won't save the exe changes. I am at my wits end. I have been on most forums looking for the answer. Please help.
 

A:"Apply" button not working in "Folder Options"

16 more replies
Answer Match 114%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 113.7%

XP
Im looking for a way to re-create two folders, 1 my pictures, 2 my video. ive tried TweakUI, but that can only move a path. I tried repair (not Repair console) with XP SP2 CD, and ended up with a chose OS screen (which i found out can be avoided with msconfig.) but still regedit has a big whole where my pictues and my video should be. Ive both a SATA and an IDE drive, IDE is used as storage and SATA is partitioned and computer management say Extended partition, with boot on it and system is on the IDE one.
Before it got messed up i had my documents on the ohter partition, which is how i want it.
I would greatfull of some help and a detailed fix, i will fomat but even that is hard as that is part of how it all become so mixed up.
Vince
 

A:Missing Shell Folder for "My Pictures" + "My Video"

Vince, Tweak UI has that ability under the Repair section. Just use the drop down arrow button and choose My Videos and My Pictures one at a time, click the Repair Now button, click Apply/OK.

Tufenuf
 

2 more replies
Answer Match 113.1%

Hi - I've trawled all over the Web looking for an answer to this with no luck so hoping you guys can help.

When I open "Folder Options" on the "Tools" menu, then select the "View" tab, the "Advanced Settings" box is empty -

I haven't got a clue how this happened and haven't had / got any viruses (I ran a couple of scanners).

Any help or thoughts would be much appreciated. Thanks.
O/S - Vista SP1
 

A:Solved: Missing "Advanced Settings" in Folder Options

11 more replies
Answer Match 112.8%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Answer Match 111%

One feature I really liked in XP was the ability to look in a folder through My Computer and sort the files by extension. For example if I wanted to get all .jpg files to one side of the folder as I looked for a file, I could click View, Arrange Icons By, Type and make that happen. I don't see that feature in Windows 7. I'm using W7Pro and can't find that or a similar feature anywhere. Is it here and I just haven't found it? TIA

A:Where is "VIEW", "ARRANGE ICONS BY", "TYPE"

open a window ,click organise/layout /menubar.
then when you click view in the menu bar group by is in the list

3 more replies
Answer Match 109.5%

I have accidentally set the folder of my program file to music folder, when I wanted to change it back there wasn't a "Customize this Folder" option available. No I am very annoyed by this. Please teach me how to change it back to default.

A:"Customize folder" option missing from folder view

Yea, I've had this problem too when making folders. For seemingly no reason at all they just lose their customize tab.

If you really want it back, just make another folder named "Program Files" in another directory, then move all the files into it (Make sure you get hidden ones too) and then delete the old program files folder and move the new one into the old directory on the C drive or wherever you had it before.

Make sure the old folder is empty though and that you don't miss anything!

8 more replies
Answer Match 108.9%

Entering the bios limits me to certain options. Is there anyway to access the other options? sorry, newbie here.

A:No "usb legacy support" "qfan" options on my asus laptop bios.

If your BIOS doesn't include such options, then they simply are not there.

I don't know about hacking BIOS's, and I wouldn't suggest it at all. You could brick your motherboard.

However, you should check with your manufacturer's website and see if there is an update available for the BIOS that may increase available options.

3 more replies
Answer Match 108.6%

When I am building a query in Access 2007, the "Sort:" and "Criteria:" selctions don't work when I switch from 'Design View' to 'Datasheet View'.
If I change the query type from 'Select' to 'Make Table' and run the query, the data in the new table mathces the "Sort:" and "Criteria:" selctions correctly.
What is wrong with my Select Query - Datasheet View? This is very annoying.
 

A:Access 2007 "Sort:" and "Criteria:" not working in Datasheet View

10 more replies
Answer Match 108.6%

2010 06 05

This is a question for information about why my networking problem finally was resolved.
I have four PC?s on my network; one Windows 7 and three Windows XP. The Windows 7 PC always sees all three of the other computers. However the Windows XP computers sometimes don?t see the other XP computers when I press ?My Network Places.? Quite by accident I discovered that if I press ?View Workgroup Computers? then ALL the other PC?s in the network DO show up. Furthermore, if I click through "View Workgroup Computers" and access/edit a file on one of the other computers, then this computer will ALSO show up in ?My Network Places.? This behavior seems to be quite consistent and works every time I have tried it. Apparently, this is a workaround to the long vexing problem of why my networked PC?s sometimes don?t show up under ?My Network Places.?

My question: why does ?View Workgroup Computers? apparently always show all the networked PC?s, when ?My Network Places? does so only intermittently or sometimes not at all?

Thanks for any response.

More replies
Answer Match 107.7%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Answer Match 107.4%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Answer Match 107.4%

When I try to "View workgroup computers" I get"workgroup is not accessible. You might not have permission to use ........"
I can ping the PC I am sitting on and the laptop on the network ok.
I can \\angelika-LT ok
I can \\192.168.0.20 ok

My PC is the administrator. Why can't I even not see the PC I am sitting on in.
No firewall is set.

Thank you for any ideas
 

More replies
Answer Match 107.4%

For some reason, my "Recycle Bin" will not display the files within it with the correct filters while in the "Details" view.

For example, I have the "View" set to "Details", and the two columns I have showing are "Name" and "Type", with "Name" selected as the preferred sort order.

With those settings in place, the "Recycle Bin" is not displaying the files in the correct order.I am not sure of the order that it is displaying them, as I can't pick-up on any pattern.

For example, it is displaying:

"File0002.jpg"
"File0003.jpg"
"File0004.jpg"
"File0001.mp3"
"File0001.jpg"

When I adjust it again so it displays them in the correct order, the next time I open the "Recycle Bin", the order has returned to the incorrect display.

Any ideas on how to correct this?
 

A:Solved: "Recycle Bin", "Details" View Does Not Correctly Sort

12 more replies
Answer Match 107.4%

When I press "open file" in the program "Business Intelligence" of an Office
program like Excel, I would like the window columns to be in "detail" view
instead of "list" view.
How can I do this?
Is this a registry default that can be changed?
Thanks,
Josh
 

A:Get "detailed" view on "open file" dialog window.

7 more replies
Answer Match 106.8%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Answer Match 106.2%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Answer Match 106.2%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Answer Match 106.2%

Good day all.

I recently restarted my computer only to be met with an empty desktop.

Also, My Start Menu is empty. I can't locate any of programs or documents.a Right clicking and going to windows explorer, I could only view : "My Computer", "Windows (C); and when I click on them, they contain few irrelevant files.

In other words I can't find my personal saved documents, "my document" folder , recycle bin and all other programs.

My wifi still works so the only thing I can do on my system is browse on the internet.

However, I can open a microsoft office file, PDF files, if I download it directly from my email or from an external drive.

I can save files on my new blank desktop.

I presume this is a virus attack.

Can anyone be kind enough to advise me on what to do?

Thanking you in advance.
 

A:Desktop erased. Can't Locate "My Documents" folder and "Start Menu" folders

closing thread, please do not create more than one thread for the same issue. Please respond at http://forums.techguy.org/windows-7/1003509-desktop-erased-cant-locate-my.html .

thanks,

v
 

1 more replies
Answer Match 106.2%

Outlook 2003:I'm a massive fan of outlooks Search folders, I receive in excess of 400 emails per day, of which approximately 250 need my attention, even if to reply back and give someone an answer.

A problem I find is that I am so busy with my emails, I often need to clean out my inbox. I do this by setting up basic search folders such as "all emails from my team which are in my inbox only" or "any email sent to me which was part of a distribution list in my inbox only" etc...

This is great for filtering my mail and I would like to create a rule as such:

"All mail within my inbox which has been either replied to forwarded by myself".

I can't seem to find any options and I'm hoping an Outlook guru can help

If you don't know the answer, can you try googling it for me to see if you can find anything, loads of heads are better one...

Thanks in advance
 

A:Outlook 2003 - Search Folder: viewing "replyed to" & "Forwarded" mail

52 views and no replys? - come on guys I thought this stuff was easy for you lot
 

1 more replies
Answer Match 106.2%

Good day all.

I recently restarted my computer only to be met with an empty desktop.

Also, My Start Menu is empty. I can't locate any of programs or documents.a Right clicking and going to windows explorer, I could only view : "My Computer", "Windows (C); and when I click on them, they contain few irrelevant files.

In other words I can't find my personal saved documents, "my document" folder , recycle bin and all other programs.

My wifi still works so the only thing I can do on my system is browse on the internet.

However, I can open a microsoft office file, PDF files, if I download it directly from my email or from an external drive.

I can save files on my new blank desktop.

I presume this is a virus attack.

Can anyone be kind enough to advise me on what to do?

Thanking you in advance.
 

A:Desktop erased. Can't Locate "My Documents" folder and "Start Menu" folders

Your files and folders may have been hidden by the virus, go to folder options and 'show hidden files and folder' to see if they actually are hidden. If they are, you can use Grindler's UnHide tool to 'unhide' all of your files and folders. As for the virus, move this thread to the virus and other malware removal forum in order for it to be noticed by an authorised malware removal member.
Good luck!
 

1 more replies
Answer Match 106.2%

Good day all.

I recently restarted my computer only to be met with an empty desktop.

Also, My Start Menu is empty. I can't locate any of programs or documents.a Right clicking and going to windows explorer, I could only view : "My Computer", "Windows (C); and when I click on them, they contain few irrelevant files.

In other words I can't find my personal saved documents, "my document" folder , recycle bin and all other programs.

My wifi still works so the only thing I can do on my system is browse on the internet.

However, I can open a microsoft office file, PDF files, if I download it directly from my email or from an external drive.

I can save files on my new blank desktop.

I presume this is a virus attack.

Can anyone be kind enough to advise me on what to do?

AFTER FOLLOWING SOME ADVICE I AM BEGINNING TO GET SOME OF MY FILES BACK BUT MY START PROGRAM FOLDERS ARE ALL EMPTY. For example; when i click the microsoft office folder, it is empty.

HOW CAN I GET RID OF THIS VIRUS PLEASE?

Thanking you in advance.
 

A:Desktop erased. Can't Locate "My Documents" folder and "Start Menu" folders

closing duplicate, please respond at http://forums.techguy.org/windows-7/1003509-desktop-erased-cant-locate-my.html . Please do not create duplicate threads for the same issue.

thanks,

v
 

1 more replies
Answer Match 106.2%

I added a slave drive to my Windows XP Pro computer, and it appears to work properly.

However, when I open the "Documents and Settings" folder (on the slave drive E:\, which is Windows XP Home Edition -- not XP Pro), I do not see any of my documents, sub-folders, etc. There should be MANY sub-folders (inside the "My Documents" folder which isn't even visible), with hundreds of documents, jpgs, etc. within it.

When that drive is installed as the Primary drive in my other computer, the User "Larry" (which is me) has all Administrative privileges. On the computer that I'm running now (with the slave drive in it), I also have Administrator privileges. I own both computers.

My User Name "Larry" is password-protected when I login to Windows (when the drive is Primary and installed into my main computer (not this computer with XP Pro).

I've tried clicking on all the users; Administrator, Default User, Larry, Guest, etc. (Note: I get an "Access Denied" error when clicking on the Guest "Documents and Settings" folder).

So, the questions are:

1. Why can't I see any files or subdirectories in the "Documents and Settings" folder on the slave drive?

2. There's supposed to be a folder named "My Documents," but I can't find it. Normally, that path is "C:\Documents and Settings\My Documents".
--- Where is that folder? It contains all the files I'm looking for.
... Read more

A:Solved: Slave drive "Access Denied" on "Documents and Settings" Folder

Follow the directions here to take ownership of a file or folder.

http://support.microsoft.com/kb/308421
 

2 more replies
Answer Match 105.9%

Please help us to troubleshoot the following problem in our Compaq NX 9000 Machine with Windows XP Professional Operating System:-

- An error shows with two options "Switch to" & "Retry" after booting the machine, which forces to press "Retry" button in the error window repeatedly and as you press this "Retry" button, "Start Menu" automatically opens and it then again asks to press "Retry" Button.
________________________________

Thanks to all helping members.

Regards,
 

More replies
Answer Match 105.9%

Hi all,

I'm puzzling this one. In the folder options when I choose 'view' the radio button to show the hidden files is missing. I've already checked the registry at the HKLM/Software/Microsoft/Windows/CurrentVersion/Explorer/Advanced/Hidden

and everything seems ok (value for 'Type' is 'group' etc.). Using the XP tweak (Kelly's corner #155) shows the hidden files, but the button still missing.

Another thing that I encountered with was that from the start menu the "Help and Support" not working. Again, the registry seems fine, and the process is activated (started). This came up when I tried to use system restore option - with no success.

Virus scan didn't find alerts of any kind

To make a long story short- below is the log file of HiJackThis. Please review it and reply if you see something to be concerned with for repairing my computer.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:36:54, on 21-Dec-08
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16762)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\McAf... Read more

A:missing "show hidden files" button + "Help and Support" not working from start menu

Ok I found the answer (after quite a lot searching), as follows:

1. for the 'Hidden files' radio button - I used methods 1 and 2 from here-
http://www.technize.com/2007/05/13/s...s-not-working/

2. for the helpcenter I just reinstalled it as described here -
http://windowsxp.mvps.org/rebuildhelp.htm
note that the file 'dataspec.xml' is needed to be available for this, and it can't be done directly from the XP CD. The thing that worked for me was to insert the XP CD, and use the file that in my computer (C:\) and afterwards another file on the CD.

Again, all this happened with no virus detection, so I believe that there is no infection. However, if someone has remarks on the HiJackThis log I've put, feel free to add them.

Have a nice day,

Fitch.

1 more replies
Answer Match 105.6%

Am using OUtlook 2003 and wondered whether there is a way to simultaneously view the Calendar and Contacts folders on one screen. Thanks.
 

A:Outlook: Simultaneous View of "Calendar" & "Contacts"

Maybe someone else has a better idea, but you could open two instances of Outlook and size the screens so that you could view both windows next to each other.
 

1 more replies
Answer Match 105.6%

Not a major issue, of course, purely cosmetic, but still a minor annoyance none-the-less:

I have a number of card reader drives that I never use (haven't even removed that plastic cover tape from them to help keep the dust out) that show when viewing the "Computer" window that displays drives. Is there any way to hide specific unused drivers from this view? Not remove drive entirely, of course, I may need to use one in the future, but just to hide them so they aren't visible, until I may chose to make them visible again?

Thanks as always,

Russell

A:Hiding unused "removable storage" devices from "Computer" folder

Hello Russell,

You could check Hide empty drives in the Computer folder in Folder Options to have them stay hidden until you insert a card. When a card is inserted, the drive will display in Computer.

Drives - Hide or Show Empty Drives in Computer Folder

Hope this helps,
Shawn

3 more replies
Answer Match 105%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Answer Match 105%

I have to set up a Broadband connection. But Local Area connection icon is missing. Someone told "drivers" could be missing... I installed few. But the problem is as it was.. please guide me in this regards.. Thank you

Screen shots Attached

A:"Local Area Connection" missing in "Change adapter Settings".. Plz hlp

Hi and welcome to the Forum
Is the Broadband connection working OK?
Where are you looking for the icon? Can you post a screenshot of the location where you expect to see the LAN icon?

9 more replies
Answer Match 104.7%

Hello. I am missing the option that while right clicking on the desktop for add a New folder. I have found the fix but have tried to fix it myself, without any success. Is there a way that I could get a TECH to access my PC and fix this issue?
Thanks
carmanhere

A:Missing the right click on desktop to "Add a "NEW" folder

Hi,
 
Before going any further, you might try to perform a

system restore and restore the system to a point where the issue does not appear.
Hope it helps.Tracy Cai
TechNet Community Support

6 more replies
Answer Match 104.7%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Answer Match 104.4%

i've been relying on going to "internet options","general" and "delete" then ticking all the boxes on that page..i found out that by doing this,my temporary internet file swere NOT being deleted.is this a vista problem? my pc came to a complete sludge of a slow down today and i found that my internet files folder had files going back a year that hadn't been deleted as i've been relying on ticking those boxes..i had tons and tons of and tons of files.i'm wondering if this is the norm and also is it possible that other files are not being deleted when using that method? if so,then i probably have folders that are totally loaded with trash.
 

A:Solved: Had to delete temp internet files by "view files" ,"select all" ,"delete"

Have you ever unticked Preserve Favorites website data?
 

1 more replies
Answer Match 104.4%

HI, first of all, I found out that my home computer was infected by the lovelorn worm. Plan to clean that tonight.

Secondly, I found copies of 2 files named "folder" and "desktop" in almost all folders. The files where identical so I suspect that there is a virus that's propagating this. Is my hunch correct? Is this related to the lovelorn virus or is it another kind? What should I do?

Thanks!!!
 

A:files named "folder" & "desktop" in all directories.. is this a virus???

Symantec site you may want to review. I don't see anything about the file replication you are experiencing but the site may be helpful to you.
 

1 more replies
Answer Match 104.4%

Wanted to resurrect an older thread, but its closed :
http://forums.techguy.org/windows-xp/652638-error-moving-file-folder-directory.html

Please read completely before responding.
I am a 30 year IT pro, most of it as a programmer. I am the geek in charge of a tech non profit org in Hawaii. www.HawaiianHope.org
so yea.. i have at least half a clue.

Here is the deal.
In doing drive copies, data recoveries, etc... when we are moving a mass amount of data from one drive to another we run into this problem a lot.
"Error moving file or folder" -- "directory is not empty"
If you restart the move, it will continue on and keep going, restart enough times and eventually it will move all directories.

I think its a programming issue with windows and wonder if anyone has a work around ?

I have a suspicion that the copy process is getting out of sequence. That it is trying to move a folder before it actually emptied it. Possibilities are :
1) windows forgot its place in moving through and navigating numerous sub directories and it is having a problem with “recursive calls.”
2) Computers with hyper threading or dual core processors are spawning the movement of files across multiple processes, and some are getting ahead of the other.
3) It did actually move the file, but the cache or something in memory has not updated, or the full data write has not completed yet before it tried to move the directory. (delayed write)
Yes, you can copy and then delete the old... Read more

A:"Error moving file or folder" -- "directory is not empty"

This is a known issue. It is by design.

As you may know, moving is in its essence an unsafe process. It would be better to use the actual sequence of copy and then delete.
 

3 more replies
Answer Match 104.4%

I use XP Pro....
I keep my audio files in folders. And I don't know why every now and then when I open these folders all the files show in "Tile mode". I hate that and always convert them all to "List mode". But in a few days they go back to all showing in "Tile mode" again.

Is there a way to make all the contents of folders Always show in "List mode"?
 

A:Make folder contents always show as "List" not "Tiles"?

6 more replies
Answer Match 104.4%

Hi All, Happy New Year!

First time posting... On 1/3/08 i ended up with a bunch of viruses on my computer. From what I can gather they are bad news. I down loaded PC Tools to do a search and found a bunch of Trojans and other nasties...

I have uploaded a screen shot of the PC Tools scan...

In the "C:\Program Files\Video Add On" folder the following can't be deleted:
icmtr.dll
icthis
isfmdl.dll
isfmm
isfmntr

In the "C:\Program Files\Helper" folder the following was found:
turbosearchsite.dll e404 Module

What is this? Do I need the file in Helper?

Please help!

PS: I am not a techno savvy guy. I kinda know what is going on but only enough to get myself into trouble and not be able to get out! I tried a few things to get rid of them but was unsuccessful.

From what I have seen I will be here for a bit. Thanks in advance.

bassndude (that's Bass as in the fish not the musical instrument ;-)
 

A:Infected: "Video Add On" and "Helper" folder that contain Trojan viruses...HELP

16 more replies
Answer Match 104.1%

Can anyone help me with this ? i got a picture ... i cant sendto desktop as shortcut the icon is missing .. help !!

A:"Desktop As Shortcut" Command Is Missing from the "Send To" Menu

Maybe this info will help:
Send To Context Menu - Remove or Restore Default Items

3 more replies
Answer Match 104.1%

http://tinyurl.com/k3vyb

I tried copying a fresh version of the file to \Windows\System32. No dice. I tried renaming it all uppercase and then all lowercase. Nothing. I put a copy in the root directory. No effect. I tried everything I could think of, but nothing worked.

Then--doh!--I stopped thrashing and did what I should have done initially: I dug into the Microsoft Knowledge Base and learned about XP's built-in Rebuild command. It can often easily fix "Missing HAL" and similar problems in just a minute or two. If you know about this command and how to use it, you can potentially save yourself hours and hours of manually reinstalling or rebuilding a failed operating system.
 

More replies
Answer Match 104.1%

Okay, I have an ATI Radeon 8500 on my Windows XP system, and one day, after my dad had used the computer, the 3D video driver stoppeed working. He can't recall doing anything. So it goes. I think "whatever", downloaded the latest Catalyst drivers, and try to install it, only to get the message "INF Error, Video Driver Not Found" and then "Try to set up your adapter with a standard VGA driver before running setup". I tried googling for info (apparently it's a common-ish issue), but I never found anything that worked. I tried uninstalling anything ATI and then installing, to no avail. I tried uninstalling the error-listed VGA adapter from the Device Manager and then running install which didn't work. Rebooting after that also didn't work (it popped up with "New hardware found" after the reboot, but it couldn't find the proper drivers).

After an unedifying series of adventures I got to http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=45&kind=1 which has several drivers for my mobo. I first downloaded (obviously) the VGA driver, and tried to run setup. Unfortunately, after preparing the install, an Error message pops up saying "The system cannot detect the device, please confirm that the device is configured properly and restart the setup program." I then tried downloading the AGP upgrade, installed it, but nothing changed. I also downloaded the BIOS update, since it mention... Read more

A:"INF Error", VGA Driver "Missing" Installing ATI Catalyst Drivers

the radeon is not integrated with your motherboard, and the onboard video has probably been disabled in the BIOS. to install the appropriate drivers for an ATI radeon 8500 card you need to download and install the drivers from ati's website. from there you can download the latest version of catalyst and install that.
 

13 more replies
Answer Match 104.1%

Computer Specs:
CPU: I5-2400
MB: Asus Pz868
Ram: Corsair 8GB Vengeance LP
Using on board VIdeo For now
Maxtor HD Sata
WD Raptor Sata
HP Lightscribe DVD-r Drive Sata

Problem I was having once I completed my new build with old system parts was as listed in title. It started out as select proper boot device, and now it states ntldr is missing. From what I have been reading it seems as if my partition with my windows 7 install is not set active. I do not have my windows 7 DVD only my old vista DVD. I tried to boot into it to make use of CMD and attempt to make my partition active but I was unsuccessful to even get into CMD. I went into bios and forced booted from the drive with the OS and still same error, also I attempted to disable the other sata and run the computer again with no success also. Look forward to hearing from someone soon. I will be sitting by my laptop all night until this computer gets running.

A:"Select Proper Boot Device" now "NTLDR is missing"

Finally Got to command prompt but it shows my current drive listed as x: dunno if this will be relevant and helpful to anyone.

5 more replies
Answer Match 104.1%

My friend's computer seemingly got a virus, since it sent an email to somebody in her email list, on its own. She asked me to take a look.

She had a virus checker, but it had never been updated. So I installed "AVGfree" and ran that. It found a "trojan horse" virus as well as some other stuff that it said should be removed, so I did. I then ran "ccleaner" and it suggested to remove a TON of crap, like 500mb worth of files (she installs dumb stuff on her computer all the time). I removed these files. Then I ran "spybot" and it removed some stuff. I then defragged, which it needed.

So here I am, feeling like a hero, but then I reboot and there's a message saying that "lsass.exe" cannot be found. I cancel this message, and then there's another message saying that "ipwins.dll" cannot be found.

I tell her to just ignore these messages until I figure it out, but then she informs me today that she cannot access her email account on her computer. So I've gotta figure out how to fix this.

Any advice?? Thanks.

A:After virus checking and cleaning, "lsass.exe" and "ipwins.dll" missing

She could try the system file checker : tell her to prepare her XP CD (she'll need it if it asks to replace the missing files), then she will have to go to start => run, and type "sfc /scannow".

If that fails, she can perform a repair install if she has an OEM, retail or upgrade XP CD (recovery CD's cant' do that). She will have to boot on the cd, thus she needs first to change the boot order in the bios to CD-rom first. Then, when XP setup loads, choose the option "To setup Windows XP now" (not the one about recovery console). On the next screen (after the licence agreement) she should be given the option to repair her current xp installation by typing R.

Once that's done, if the CD wasn't a SP2 version, first thing is to go to windows update to reinstall XP SP2 and all updates she could have done since. Don't surf on the internet before any antivirus and firewall (either windows or another) is enabled.

2 more replies
Answer Match 103.8%

Hi,

I have several icons/files from my "User" folder showing up in the "Computer" folder (several in duplicate), PLUS numerous blank icons...



This seems to have occurred after the Common Files folder became corrupted, after I somewhat riskily decided to power off while Vista was attempting to come out of Sleep mode - it had already taken about 3 mins and I was in a hurry - bad move, I know. That delay appears to have been due to an old version of Online Armor, and has now been fixed (by an update). Chkdsk scanned and (apparently) corrected some errors, and I also ran SFC which said it had corrected some errors but had also found some that it couldn't correct. Any help much appreciated.

Thanks.

A:Icons/Files from "User" folder showing up in "Computer" folder

Hello Aster, and welcome to Vista Forums.

You might see if doing a system restore using a restore point dated before this happened may be able to fix it.

Hope this helps,
Shawn

5 more replies
Answer Match 103.5%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Answer Match 103.5%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Answer Match 103.5%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Answer Match 103.5%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Answer Match 103.5%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Answer Match 103.5%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Answer Match 102.9%

I have XP home.

It seems that every time I go to view images, the "view" defaults to "filmstrip"- can I change this setting so that I ALWAYS get "thumbnail" view? It's really annoying to have to keep changing it all the time.
 

A:How do I set "view" so that it doesn't keep defaulting to "filmstrip"?

This reg edit should fix it.

http://www.kellys-korner-xp.com/xp_tweaks.htm

#2 Increase folder view size limit to 8000

To use the Regedits: Save the REG File to your hard disk. Double click it and answer yes to the import prompt. REG files can be viewed in Notepad by right clicking on the file and selecting Edit.
 

2 more replies
Answer Match 102.9%

Hi From Turkey

I have a problem.
I bought a new computer with windows seven Pro
Here is a company and we have a domain controller.
So my old computer (With windows XP Pro) was in domain.
I joined in my new computer to domain.
I removed the Harddisk of my old computer. and then i put it into my new computer case. second drive.
I restarted the computer. When i look the Second drive i can see "Document and Setting" directory. iam logging in to "Desktop" directory to copy my old files to my new desktop. but it was EMPTY.

When i remove the harddrive and put it into my old computer i can see all the files.
Has anybody have any idea?

P.S. Sorry for my bad English.

A:I cannot view the XP files "Desktop" "My documents"

Set the Win 7 PC to show ALL Files and Show Hidden and System files.

When that old hard drive is in the new computer Take Ownership of that folder. Set permissions to allow Full Control of that folder for your username.

1 more replies
Answer Match 102.6%

All of the sudden my "System Volume Information" folders (the system restore folders) on all of my hard drives are shown even when viewing hidden files is off. Tried to mark them hidden, but it won't let me. Anyone have a clue as to why they would suddenly unhide themselves and not allow me to hide them again? This is on XP Pro with no service pack1 installed. Just bugs me they did that all of the sudden. Haven't installed anything recently except Paint Shop Pro 7 and Easy CD Creator 5.2 plus the update patch to 5.3.

Thanks,

Smith
 

A:"System Volume Information" folder won't go "hidden"

11 more replies
Answer Match 102.6%

When a download is complete, the dialog box opens, announcing "Download Complete" and when I Click the "Open Folder" button the "Download Complete" dialog box closes but the Target Folder doesn’t not open. First noticed this after SP3 in this XP Home environment.

Where’s the “Honor the 'Open Folder' button” setting to get this functionality back?
 

A:The "Download Complete" "Open Folder" button ignored

7 more replies
Answer Match 102.6%

Okay, so apparently my "Programmer" folder on C:\ changed to "Program Files". I live in Denmark, so the system is danish. The folder "Program Files" used to be named "Programmer", but somehow it changed to "Program files". It is weird, becuase that my other x86 folder is still named "Programmer (86)". It's kinda annoying, please help me somebody!!!
Can anybody give me some tips and tricks, on how to rename it back?

I would be really happy!

THANKS!!!

A:The folder "Programmer" changed to "Program Files" HELP!!!

When i click "Rename" and i rename the folder to "Programmer", the folder automaticly renmaes itself to "Program Files"!!!
HEEELP

12 more replies
Answer Match 102.6%

OK. This is complicated; please be patient. Some months ago my PC (Win7 Ultimate x64) suddenly came up with the dreaded "BOOTMGR missing...press CTRL+ALT+DEL to continue..." error message. No idea what caused this; the OS had been operating flawlessly for almost a year. Anyway, I tried using a "Windows 7 Recovery Disc" which I had burned from an .iso file downloaded ages ago. After several unsuccessful attempts to fix the problem with the Recovery Disc, I gave up in frustration and rebooted from the Win7 installation DVD. It of course told me there was an existing Win7 OS on the machine; did I wish to update/overwrite that or install a NEW copy of the OS? I chose "new copy" and installed it. This fixed the problem, of course. Once I was certain all was working (several days later), I used Win7's "BOOTMGR" utility to DELETE this second, unnecessary version of the OS. All still worked fine, but it "shrunk" drive D: and left an "UNUSED" area on the drive (according to the DISKMGR tool). I don't remember the drive letter the install routine created. Anyway, I could not "extend" D: or get back the wasted HD space no matter what I tried. Naturally, in the process I stupidly screwed up something and was back to the "BOOTMGR missing..." situation. Arrgghh!! I used another PC to search for help on the 'net, and found a lot of praise for a utility called "EasyBCD" (using "Ubunt... Read more

A:File "BOOTMGR" & folder "BOOT" appear on TWO partitions...why?

post screenshot of disk management with all fields visible

bootsqm.dat will be created if you do a "check disk". It can be deleted if want.
bootstat.dat see The Boot Status Data Log

5 more replies
Answer Match 102.6%

I am getting an "Access is Denied" error message on a hard drive that I am trying to recover files from that is from my HP Pavilion with Windows XP that fried. My hard drive is still good, and I am trying to rescue the files in the "Documents and Settings/Owner" folder. I have connected the hard drive to my laptop, which also has XP; but when I try to open the "Owner" folder in "My Documents", it tells me that "Access is Denied." And when I hover over the folder, it says "Folder is Empty." But it is not empty. I can also access everything else on the drive fine -- just not this folder. I suspect that this is a networking type of issue, but I am not sure how to resolve it. Can someone please help me?

Thank you,
 

A:Solved: "Access Denied", "Folder Empty"

9 more replies
Answer Match 102.6%

Hi, I'm using Windows 8.1 x64 and I'd like to add to the MAIN menu of context menu (just right-clicking) the options to create a New Folder and a New Text Document. Right now I have to go to the "New" option and then select Folder or Text Document.

Thanks!

A:Add "New Folder" and "New Text Document" in context menu

This may help:

How to Add Any Application Shortcut to Windows Explorer?s Context Menu

10 more replies
Answer Match 102.6%

Hi, I need to find a fix for this issue I have with a change in Windows 8. I am running Windows 8 Pro and normally (in windows 7 and older) when I Right click on a folder, the default option for properties is "r". Nice and quick and next to my
left hand which rests on the left side of the keyboard. Now it has changed to "o" and not only that, there are 2 options for "o". Open and Properties. Very frustrating and not very easy to get around. Any way of getting around this whether
it be alternative software or reg hack or something... anything. Itsvery annoying.
Cheers

A:Right Click on folder and select "R" for Properties has changed to "O"

Well it looks like the US version oif the upgrade iso/cd is the version that has the r has properties. UK version is O which really doesnt make sense as open is O aswell so you have to press it twice then enter. I like my keyboard shortcuts so US version
is. Problem solved. language to install must read US (English) on the install screen.
Prolem solved
cheers all for your assistance.

12 more replies
Answer Match 102.6%

I have a home network of five computers where one acts as a common computer ("server") where most data from the other four computers is stored (music, pictures, word processing, movies, etc). All five are running XP Pro SP2.

The "server" had two 80GB hard drives, but SMART was indicating that one was failing, so I replaced it with a 200GB drive. Now, every computer in the house can access the 80GB drive and all of its files but none of the computers in the house (except the "server") can access the new hard drive. I have the file sharing set to full access, and I can view the file folders that are on the drive from the networked computers, they are all listed. But when I click on a folder, I get "Access is Denied." When I mouse over a folder, it reads, "Folder is Empty"

But the folder isn't empty though when accessed from the local computer, only when trying to access it over the network.

I have turned off the Windows Firewall, turned it on again, off again, etc, no change. I have Zone Alarm on all the computers, turned it off, still no change.

Any ideas??? I have over 500 CDs on that harddrive, and I want to listen to music from my other comuters! I'm going nuts here.
 

A:"Access Denied", "Folder Empty" messages

There are two ways that might work.

1. From a computer other than the server right-click "My Computer" and choose "Map Network Drive". Where is says "Folder" type "\\<ip address>\C$" if you want to share the C partition of that drive (don't type the quotes).
2.
Go to My Computer and and click on the Tools Menu and then Folder Options.

Click the view tab.
Scroll all the way down until you see "Use simple file sharing (Recommended)" and uncheck it.
Click OK.

Now right-click the drive you want to share and choose "Sharing and Security".
Click the security tab.
Click "add" and add "Everyone".
Give "Everyone" the rights you want them to have "Read only" or whatever you want.
 

2 more replies
Answer Match 102.6%

I used this "hide a folder" program called "folder lock," and I guess it's buggy because it won't let me unhide the files. It unhides the folder containing the files, but the files are still hidden. They're still there, because when I copy and paste the folder, it shows that the files are being copied, but in the new folder they will be hidden again. Checking the "property" of the folder shows the correct size as well. How can I get windows to reveal them?

The hidden files are listed in this folder called "n|+|-n" or something like that I think, but when I type that in dos or windows it won't let me access them.

PS I contacted the company, but I don't expect a response back any time soon and those files are kind of important.

Thanks!
 

A:How to "unhide" a folder hidden by a "hidefolder" utility?

Welcome to TSG....

And of course you did not or don't have any backups of these files on any other media?

Actually the only way to gain access to these files is by contacting the manufacturer of the security program ir you would have to learn how to program good enough to bew able to get into the secure area. To the best of my knowledge since this is a security thing and we have no way of knowing whether or not you actually have the rights to get into these files I doubt if you will get much direction toward solving your problem.

Go with contacting the manufacturer of the software.
 

1 more replies
Answer Match 102.6%

Orion,

was burning data on a DVD-R
i used the "like flash disc" method formatting it
then went on deleting, moving & renaming image folders..
i think that was wrong to do..
anyway
when i started the burn process it stopped responding after several minutes..
i had to force restart the machine to eject disc..
then i discovered a specific folder i put in the image is very big in size..
checked it and found the windows has created system files and folders in it
AppData, Temp, Microsoft, ..etc
it couldnt be deleted the easy way
used Unlocker, could just delete few folders then the machine stops responding..
and this repeated useless several times..
used the Safe Mode With Command: RD /S.. it deleted the folder..
but after restart windows normally the folder is still there and keeps creating system stuff..
some programs started using this location to run, like Chrome..
i discovered i lost all my history and cookies and had to reinstall it and its still sticking to the Burn Folder's infected folder..
the folder is growing fast.. i have to to wipe it using command and reinstall Chrome again and again..
i need to burn discs too..

i apologize for being too long
please help

BLKND

A:"Burn Folder" Disaster (not the usual "can't del" thing)

did anybody read this?

7 more replies
Answer Match 102.6%

Without quotes, no extension. Anyone know what they are and if they're legit?

Thanks.

A:My c:\windows folder has a couple of strange files: "Dő„" and "@ů#"

They dont see legit to me. Try to do a virus search. Otherwise i recommend factory reset

9 more replies
Answer Match 102.3%

Hello,
I really need your help. I have exams coming up soon so need to get back on my computer as soon as possible. I have a notebook with windows XP. The model is Compaq mini CQ10-400.

When I switch the notebook on it displays the "BOOTMGR IS MISSING"... message. I cannot get on my computer passed that screen, apart from when I press escape after pressing Ctrl, Alt, Del. It gives me 4 options ... " F1 system information, F2 system diagnostics, F9 boot device options, F10 BIOS setup."

There is no disc drive so what should I do, and what is the easiest way to fix this issue.

Thanks in advance.
 

A:"BOOTMGR IS MISSING""PRESS Ctrl+Alt+Del to restart"

16 more replies
Answer Match 102.3%

Hello,
I really need your help. I have exams coming up soon so need to get back on my computer as soon as possible. I have a notebook with windows XP. The model is Compaq mini CQ10-400.

When I switch the notebook on it displays the "BOOTMGR IS MISSING"... message. I cannot get on my computer passed that screen, apart from when I press escape after pressing Ctrl, Alt, Del. It gives me 4 options ... " F1 system information, F2 system diagnostics, F9 boot device options, F10 BIOS setup."

There is no disc drive so what should I do, and what is the easiest way to fix this issue.

Thanks in advance.

A:"BOOTMGR IS MISSING""PRESS Ctrl+Alt+Del to restart"

Hi and Welcome to TSF!

The only way to fix this is to use startup repair from the Windows XP CD.

15 more replies
Answer Match 102.3%

Hello all.

First off, I am in no means acquainted with any troubleshooting or fancy thing outside of everyday computer usage, so please respond as if you are talking to a dummy. I do have fairly decent common sense and Google skill however, which has given me enough confidence to try and fix this issue on my own.

Basically, one day I start my computer (running Windows XP Professional SP3) up and get a black screen saying:

"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this

Start in safe mode.
Safe mode with networking.
Safe mode with command prompt.
Last known good configuration setting (most recent setting that worked).
Start Windows normally."

For a few times, I was able to get Windows working with the last two options, but before I could dedicate time to fix the issue, it became so that none of these options worked, and I got caught in a restart cycle with this screen. Last things that I can recall that may have caused this: Windows Update or CCleaner Registry Fix (just something I do sometimes to make sure everything is working, nothing was wrong prior).

I bought an external HDD enclosure with hopes of popping my internal into it, and saving my stuff onto my laptop before messing around. Oddly, in My Computer, the 2 drive icons (a System Recovery one, and my Main one) would flash for a few seconds, every few minutes, and when I'd quickly click them, it'd say the... Read more

A:"Windows did not start successfully" to "ntldr is missing"

BTW if it IS in fact possible to copy certain files from my laptop's OS, I just realized I can probably just copy those files into the desktop internal (when plugged in as an external) instead of going through the whole DOS thing? But keep in mind, that's the small 3GB partition, so I don't know if that would even work. Unless putting those boot files on that small partition, will help open up the rest of the drive. Not sure how that works.
EDIT: Apologies for the double post, just saw the "edit" button.
 

2 more replies
Answer Match 102.3%

There appears to be no open thread on this issue...disappearing context menu "new/textdocument" option.

After trying several alternate text editor demos I found that my registry .txt entry was empty except for the (default) line item...I replaced the entry with an expanded entry found elsewhere on this forum which called for notepad.exe and included ItemName and NullFile etc.

After rebooting and checking my program associations to verify that my new editor, EditPlus, was the default, I found that the "new/text document" option appears and works in all the usual places including the desktop...

But there must be more to the story... Notepad still appears in the ItemName entry. Is this just a default reg entry, with the actual default program assignments appearing elsewhere?

BTW, as an old poster suggested elsewhere X-Setup has been de-commissioned but is still available on MajorGeeks. It has some editing capability but wouldn't add a new TXT item because "it already existed" (already registered).



W7 x64 SP1

More replies
Answer Match 101.1%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

A:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Answer Match 101.1%

Hi:

Looking for insight/advice re: KB3054476.

According to Infoworld, it was "Optional" in May, but I was not offered it then.
This week, it was offered as "Important" and "Recommended" (!), but only for one of my 2 Win7/64 boxes.

I have read the MS KB article, as well as THIS FORUM THREAD, the latter of which includes a report of a BSOD due to this particular update.

However, there isn't much out on the web about it.
And most of the discussion about it is overly technical for me.
And I am confused as to why it was previously offered as "Optional", but now is "Important" or "Recommended".

I don't *think* I "need" it (as I have no webcam on this box). And I don't like to tempt fate by fixing things that are not broken.

So, 3 questions:
Is it safe to install?
Is it really necessary/important?
Or would I be OK to hide it?
Thanks very much in advance!

A:KB3054476 offered as "Important"/"Recommended"/"Optional"

The status of updates changes with circumstances.
If an update isn't relevant, it won't be offered at all.
If however it's relevant but the related software is not apparently in use, it may be 'optional' - and gravitate to 'Recommended' or 'Important' if the related software is in use.
It can also be promoted through the hierarchy by MS depending on feedback through WU and error-trapped feedback.


If you have (and use) a webcam, then it's probably best to install the update.

4 more replies
Answer Match 101.1%

hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane

A:Remaking "My Music", "My Pictures", "My Videos" folders

  
Quote: Originally Posted by Legume


hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane


You have a backup from before the problem started? a win 7 dvd to do a repair install?
ken

4 more replies
Answer Match 101.1%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

A:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

1 more replies
Answer Match 101.1%

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

A:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

3 more replies
Answer Match 101.1%

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

A:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

1 more replies
Answer Match 100.8%

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

More replies
Answer Match 100.8%

there is no "folder options" my my tools menu that if why i can't unhide folder.. i have already download registry fixer and antivirus and nothing happens.. plz i need help..

this is my logfile
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:50:47 AM, on 1/9/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\3CX PhoneSystem\Bin\Pgsql\bin\pg_ctl.exe
C:\Program Files\3CX PhoneSystem\Bin\3CXMediaServer.exe
C:\Program Files\3CX PhoneSystem\Bin\3CXFaxServer.exe
C:\Program Files\3CX PhoneSystem\Bin\Pgsql\bin\postmaster.exe
C:\Program Files\3CX PhoneSystem\Bin\3CXIVRServer.exe
C:\Program Files\3CX PhoneSystem\Bin\Apache\bin\Apache.exe
C:\Program Files\3CX PhoneSystem\Bin\Pgsql\bin\postgres.exe
C:\Program Files\3CX PhoneSystem\Bin\3CXVBMServer.exe
C:\Program Files\3CX PhoneSystem\Bin\Pgsql\bin\postgres.exe
C:\Program Files\3CX PhoneSystem\Bin\Pgsql\bin\postgres.exe
C:\PROGRA~1\Grisoft\AVG7\avgamsvr.exe
C:\Program Files\3CX PhoneSystem\Bin\Pgsql\bin\postgres.exe
C:\Program Files\3CX PhoneSystem\Bin\Apache\bin\Apache... Read more

A:pPLZ HELP ME about "no folder options on tools ". and how to remove recycler virus..

Hi, Welcome to TSG!!
Please close/disable all anti-virus and anti-malware programs so they do not interfere with the running of ComboFix and make sure you are disconnected from the Internet after downloading the program and before scanning.
Very Important! Temporarily disable your anti-virus, script blocking and any anti-malware real-time protection before performing a scan. They can interfere with ComboFix and remove some of its embedded files which may cause "unpredictable results".
Click on this link to see a list of programs that should be disabled. The list is not all inclusive. If yours is not listed and you don't know how to disable it, please ask.
Remember to re-enable the protection again afterwards before connecting to the Internet.

Download ComboFix and save it to your desktop.

**Note: In the event you already have ComboFix, this is a new version that I need you to download. It is important that it is saved directly to your desktop**

Close any open browsers and make sure you are disconnected from the net. Unplug the cable if need be before running ComboFix.

WARNING: IF you have not already done so ComboFix will disconnect your machine from the Internet when it starts.
Please do not re-connect your machine back to the Internet until ComboFix has completely finished.
If there is no Internet connection when Combofix has completely finished then restart your computer to restore the connection.

Double-click on combofix.exe and follow the promp... Read more

1 more replies
Answer Match 100.8%

We have upgraded our systems to Windows 7 (From XP). I have setup Indexing on our server and the employees use the Search Bar (upper right on a window) to search for a file they are looking for. However we have over 100,000 folders that we are looking though. Is there a way to set the Search to default type:Folder? Or have it search just folder names instead of showing files also?

If I type in "12345" it will take a minute to search everything and give me 20 files+1 folder.
If I type in "12345 type:folder" it will take 10 seconds and give me 1 folder.

When the employees are on the phone, quicker the better, and having them put "type:folder" after everything is time consuming for them.

I've looked around online and i'm not sure if i can do this.

The computers using this are running
Windows 7 Pro x64
Updated to Current

Server is Windows 2008 (Indexed folder the employees are searching in)
Updated to Current

A:Searching: Change Default Search options to set/add "Type:Folder"

You'll probably want to go with something like FileSearchEX to avoid retraining. There are a few others but this one closely matches your question.

1 more replies
Answer Match 100.8%

i am so sad (And pissed off)

for the past 4 1/2 hours i have been trying to fix my computer. i logged onto it this morning and all of a sudden, most were suddenly unrecognized by Windows. however, Internet Explorer worked, and when i clicked on a specific file or folder, it open in its respective program or in the case of a folder, it opened up successfully.

after a couple hours i got into the folder options and created the ".exe" and ".lnk" file extensions and the icons on my desktop went back to normal. however, i STILL cannot execute any of the actual PROGRAMS on their own. whenever i click on a PROGRAM, it says the same stupid thing about me needing to create an association in folder options. but personally i do not know how to do that. oh yes, keep in mind i have TRIED to do regedit, its not supported cuz its an exe, and oh yeah, sysem restore dont work either

could someone PLEASE help me?!?! thanks

A:Stupid "please create an association in Folder Options" crap

I'm not sure how much this will help but it leads in the right direction http://www.bgamug.org/understanding-...ociations.html. Maybe someone else has a better solution.

1 more replies
Answer Match 100.8%

Folder options > View > " Apply to folders " button is greyed out.


How to activate it ?

Thank you.

t-4-2

A:folder options...." apply to folders" button is greyed out

Hello t-4-2,

Normally that will only not be grayed out if you opened Folder Options from within the same Windows Explorer window through Tools (Menu bar) -> Folder Options.

Folder View - Apply to Folders

2 more replies
Answer Match 100.8%

Hi Everybody,

I'm trying to edit my hosts file, using Notepad ++

Oddly enough, the file-open function in Notepad ++ doesn't even "see" much less open/list the directory where hosts is.

windows\system32\drivers\etc\hosts.(no extender)

What the heck is it about that directory---I've hunted through the folder-options list without any success.

Thanks,
Paul

A:Some kind of "Folder Options" thing,about visible directories

Odd. Try running N++ as Administrator and see if that makes a difference

6 more replies
Answer Match 100.8%

Hi, guys.

After my pc has been infected by the "bagle prague" (hldrrr/wintems/flec006/srosa) i got cleaned by a software called Regrun. But the malwares have left some problems on my pc. The main problem is : In Control Panel / Folder option / View, i can´t find the options related to "show hidden files". In this forum there is a solution already posted,but it didn´t solve my problem.
The member says to go to [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\Folder\Hidden]
and change the value into "group" My problem is : I do not have this last folder in the registry line ("hidden").
I mean, there is [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\Folder] and in this folder ("folder") there´s no "hidden" folder. So I can´t change the value of "hidden" ´cause there´s no "hidden". Help me please, thanks.
 

A:Option "show hidden files" in controlpanel->folder options disappeared

Greetings pokemon2005, Welcome To TSG

Show hidden files and folders - option missing or does not work
http://www.winhelponline.com/blog/show-hidden-files-and-folders-option-missing-or-does-not-work/
 

1 more replies
Answer Match 100.5%

Hello,

I have created a library called "America" and put 4 folders into it: "East", "West", "North" and "South".

Each of these regional folders (real folders, not libraries) contains a separate folder for each state in that region. Thus, the "West" folder contains folders called "California","Oregon", etc..

Lastly each state folder contains all types of files pertaining to the specific state.

When I open the "America" library, I would like to see an integrated (and alphabetized) listing of ALL the state folders: "Alabama", "Alaska", "Arkansas",etc..

However, when I configure the library to sort by folder, it sorts the state folders by name, but only WITHIN their respective regions. That's not my vision: I'm looking for an integrated A-to-Z list of all the folders across all the regions.

Alternatively, if I select the "Sort by name" option, then all the state folders disappear, and they are replaced by a very long list of all the component files -- it's an integrated, alphabetized list (good), but of files (bad), not the state folders that contain them.

Can anyone suggest a clever tweak to move me closer to my vision?

Thanks!!

Jay

A:Library Question: Can I integrate the "Arrange by Folder" view?

possibly you could arrange them manually,
this tutorial here will allow you to move the folders around to suit you preference

9 more replies
Answer Match 100.5%

Hi,

I recently upgraded windows 7 onto both my laptop and desktop PC's. Initially, when I viewed the network tab in explorer, it used to bring up a list of my computers, of which I could then pick one, expand the list and see the corresponsing drives attached.

Today, I (stupidly) set up a homegroup. deciding i didn't really need it, i then deleted it! however, now when i expand the computers under the network tab, i cannot see the drives anymore. i can only see a folder labelled "Users".

Does anyone have any idea how i can get it to revert to what it used to show?

many thanks,

mike

A:Unable to view network drive, only "users" folder

You will need to make sure that you officially "leave" the Homegroup to fix that particular problem. After that you will want to set up a Workgroup type of network.

Homegroup - Leave

2 more replies
Answer Match 100.5%

I've set the default folder view to Details for all drive folders.

But the folder I am currently working from is accessed through the internet, i.e. the file path at the top of the window starts with "The Internet".

This defaults to icon view even though I applied the Details view to all other drive folders.

Is there a way to set the default view for internet folders?

A:Setting default folder view for "The Internet" path?

Are you able to take a screenshot of the folder in question, i'm not sure what you mean by the internet folder?

-Jamie

3 more replies
Answer Match 100.5%

I am wondering if anyone has this issue too after updating to window 8.1.
In the window explorer, I like to set my files sort by date modified, in every other window version even I browse to other folders or drives and return to the particular folder, it will be still sort by date modified. However in window 8.1, whenever i browse to other folder or drives, the particular folder will go back to sort by name which is annoying as I have to sort it to date modified every time. Anyone have a solution to this problem??

More replies
Answer Match 100.5%

Hello, I recently got Vista 32-bit (swedish version), and I'm having a bit of trouble with my pictures-folder.


Since I use swedish vista, I'm not sure on exactly what things are called in the english version, but anyway.

My sort-by options and the overall adjust-option of the folder (adjusting it as a picture-folder, or just a file-folder etc.) seems to be resetting, I want it to always sort my pictures by the date it was last changed, since I want to find the newer pictures easily. This seems to work fine with other folders, but not on this folder, since it keeps resetting, is it a useless "feature" because it's the picture folder? and can I change this somehow?

Please let me know if you need any more info to be able to answer the question correctly.

A:"Picture" folder sort-by options etc. keeps resetting.

No suggestions?

1 more replies
Answer Match 100.5%

I do not know what to do to "Create association in Folder Options control panel" in order to open a file.

The file was created with Microsoft Works 4.5. The extension "wdb" exists in the Folder Options list, with the association of "Microsoft Works 4.5 Database." The actual name of the file is: CGS' CD&Records Collection.

"New" in Folder Options apparently refers to a new extension, not a file.

This is the first time I have been unable to open this file.

Your help will be greatly appreciated.

{redoak}
 

A:Solved: How to "Create association in Folder Options"

10 more replies
Answer Match 100.5%

Hi there, this has been a problem on my computer for some time.

In tools -> folder options, instead of a "Show hidden files and options", I get a long string of question marks instead. "????????"

This commonly shows up in my malwarebytes scans, and everytime I click remove selected it just comes back. It does not seem to have negatively affected my PC so I have left it alone til now.

I have attached a screenshot to show what I mean. I also have a screenshot of the malwarebytes scan if required.

Recently I downloaded a free version of AVG 8.5 and did a scan on my computer. AVG identified it as worm/VB.BSP and sent it to the 'virus vault'. After this upon rebooting my PC I got an error on startup that said 'Windows cannot find syssetup.exe'

I was also unable to open my drive E with double click, but right-clicking and pressing explore worked fine.

I have since done a reformat and the PC is back to 'normal', however the hidden folders still show '??????' as usual.


DDS (Ver_09-09-24.01) - NTFSx86
Run by Owner at 23:03:54.10 on Fri 09/25/2009
Internet Explorer: 7.0.5730.13
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.3327.2857 [GMT 8:00]


============== Running Processes ===============

C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\spoolsv.ex... Read more

A:worm/VB.BSP - Hidden folder options shows as "??????"

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

------------------------------------------------------

Please note that these fixes are not instantaneous. Most infections require more than one round to properly eradicate.

Please stay with me until given the 'all clear' even if symptoms seemingly abate.

Kindly follow my instructions and please do no fixing on your own or running of scanners unless requested by a helper.

------------------------------------------------------

Please visit this webpage for download links, and instructions for running ComboFix:

http://www.bleepingcomputer.com/comb...o-use-combofix

* Ensure you have disabled all antivirus and antimalware programs so they do not interfere with the running of ComboFix.

Get help here

Please post the C:\ComboFix.txt in your next reply for further review.

------------------------------------------------------

15 more replies
Answer Match 100.5%

OK, this is my first post here, & I've never joined a Windows forum, or one for people who build their own computers, although I am somewhat familiar with forums, so let me try to give enough info to see if I can clarify my first question & add a few related ones.

I just upgrades a Dell Precision 690 desktop to Vista Ultimate 64, because for some of the work I do in Photoshop CS4, I felt I would benefit from having access to over 3gigs of Ram. The Dell has 2 Intel Xeon 3 gig processors & the compatibility in place to run a 64bit OS, so I bought Vista Ultimate 64, and upgraded to 8 gigs of Ram. That all works fine & I set up several 66 meg files for large format printing the other day, so I'm pleased with the upgrade from that standpoint.

I just need to get used to some pesky details that slow me down & haven't figured them out from searching. I did make my way to the "local group policy editor" and "enable folder options" so this is now giving me my preferred view (details) whenever I open Windows Explorer.

There are 2 related issues I want to ask about. When I open Windows explorer, it opens as a small window & I like to maximize it. It also opens with the folder named after my user name expanded, and the "Computer" folder collapsed. I never store anything in the folder named after my user name, & I store everything in a mapped network drive, that is mapped to show up below the "computer" folder.

QUESTI... Read more

A:are "Folder options" available in file>open windows?

Hello Islandsign, and welcome to Vista Forums.

You can use METHOD TWO in the tutorial below to customize and reset the folder view settings so Vista will remember your folder view settings afterwards. When you make a change, close the window. When you open that same window, it should be the same as when you last closed it.

Windows Explorer Folder View settings

Hope this helps,
Shawn

13 more replies
Answer Match 100.5%

For the past week wheneve I start my computer. The screen. Dims as soon as I move my mouse or press down a key on my keyboard. I thought maybe my power settings became changed somehow. But whenever I try to open "Power Options" it doesn't open up. I am also unable to get any network connectivity with this laptop. My network icon is not in the notification area, and when I ipen the Network and Sharing center my network is not wireless or wired. It says "Unknown" Operating System:  windows7Can anyone please help me?

More replies
Answer Match 100.5%

Hi everyone.

I have a question that I am sure would have been answered, but I could not find an answer while searching this great board, so I will ask.

I have set the "choose detail" view for a USB drive root folder that I would like to cascade down through all sub-folders only.
Note: Even though I have specified a USB drive here, I can't make it work on a fixed drive either.

I do not want my already previously set folder in other directories to change. I have looked through the folder view options but just can't seem to get it right. Can anyone help me out please.

Thanks
ASM

More replies
Answer Match 100.2%

Hey all,

Good with computers but not too technical. Recently I did "CTRL+ALT+DEL" to see what was causing spikes in CPU when nothing was running other than a couple FIREFOX windows.

Upon opening up, the window did not look like its usual box. It isn't the usual ful box. "File Options View Windows Help" is not visible.

"Windows Task Manager" is NOT present at the top.

The following tabs are NOT present:
"Applications" "Processes" "Services" Performance" "Networking" "Users"

Here's what is displayed in the pop-up box:
Buttons at bottom:
"End Task"
"Switch To"
"New Task"

I don't get it?

I have a Toshiba A305 laptop running on Vista x32, SP2. I'm TREND Micro Internet Security suite and the scans don't pick up anything out of the ordinary.

What is wrong with my laptop? Is this a registry error if so how do I fix?

Thank you.
Lai704

A:VISTA Problem w/ "CTRL+ALT+DEL" - missing tabs and options!!!

hello

open your task manager and double click your task manager where i put a red x on the attached picture..

good luck

9 more replies