Tech Problem Aggregator

"services" tab in "system configuration utility"

Q: "services" tab in "system configuration utility"

In my "services" tab in my "system configuration utility" (accessed via 'msconfig', I count about 75 entrees......all of them checked. Now, I know there a some of them that I need......for example: "AVG Update Service". But there are many (most, in fact) that I haven't a clue about what they do or if I really need them. For example: "Cryptographic Services". What in hell is that? What I'd like to do is disable all the stuff that I don't really need, so that I'm not wasting resources. Thanks for any help anybody can give. If you really come through, another donation will be on the way. But don't get the idea that this is a bribe.

pjblevin

A: "services" tab in "system configuration utility"

6 more replies
Answer Match 117.3%

Hi guys !!

The other day I opened my msconfig and in the Startup Items I saw a "Turok Registration"
This item was unchecked... but... The thing here is that I don't have anymore that game installed in my computer !!

That's why I called (ghost) "startup item"

I asked to the boyfriend of my roommate to uninstall that Game
So then later, I checked and it was uninstalled... but I still see that "Turok Registration" is in my Startup Items

I try to search in the path of "Command" so i can delete that entry, but i don't find any of those files it says in there,following that path...so how can I delete that entry form my Start up .

Notice that I want to "Delete" for complete that entry no just disable it , because I don't have that game in my computer.

Thansk very much for help and pls. forgive my ignorance at this and my English, not my first language.

Toti
 

A:Solved: System Configuration Utility (ghost) "startup Item"

8 more replies
Answer Match 115.5%

Over the years, I've always used the "System Configuration Utility-> Start"
tab in Windows 98 to remove installed stuff I dont want to run at
start up etc.

I've noticed all these postings around here listing various info and
programs that start in Win XP, but I dont know how to go about it
myself. Anyone any hints/tip/websites for this XP newbie?
 

A:Win XP alternative to "System Configuration Utility?"

One of my favorites is X-Setup from www.xteq.com.
 

3 more replies
Answer Match 114%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 112.8%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Answer Match 111%

Made a HUGE mistake, messed with the settings under "My Computer" > "Manage" > "Services> and also the "Local Users". Now having trouble, can not see my "Start and Task Bar", the "windows"+ ''e" is no longer working.

How can I restore the Services & the Local Users account without having to reinstall my whole computer? I am afraid I will loose lots of files... I do not remember what exactly I changed, but some of the "Services" I changed to "disable" now when I try to open properties and change them back, I am unable. The right click to get to properties is not working.

Your help is highly appreciated.

A:How to restore the defaults for "services" under "My Computer" > "Manage>

I am not sure about the "quick" way of restoring, but what you can do is go back to services, "RIGHT-CLICK" the white area select "HELP" then the third option is "Default settings for services"

you can see what the default was and manually restore it. I have tried to copy and paste it below

==========================================================

Service Startup Type Log On As Additional information
Alerter Manual Local Service
Application Layer Gateway Manual Local Service
Application Management Manual Local System
Automatic Updates Automatic Local System
ClipBook Manual Local System
COM+ Event System Manual Local System
COM+ System Application Manual Local System
Computer Browser Automatic Local System
Cryptographic Services Automatic Local System
DHCP Client Automatic Local System
Distributed Link Tracking Client Automatic Local System
Error Reporting Automatic Local System
Event Log Automatic Local System
Help and Support Automatic Local System
IMAPI CD-Burning COM Manual Local System
Internet Connection Sharing Manual Local System
IPSec Services Automatic Local System
Logical Disk Manager Automatic Local System
Logical Disk Manager Administrative Service Manual Local System
MS Software Shadow Copy Provider Manual Local System
Net Logon Automatic Local System
NetMeeting Remote Desktop Sharing Manual Local System
Network Connections Manual Local System
... Read more

3 more replies
Answer Match 109.8%

Hi everyone, this morning I turned on the PC to do the usual stuff but I could not connect to my internet with the error "Unidentified Network - Limited". After trying to troubleshoot my ethernet I get the error "Ethernet doesn't have a valid IP configuration". After troubleshooting didn't work I took to the web. I literally tried every solution I found... to no avail. This brings me to extra frustration since I only built my PC last thursday.

System Specs: CPU; AMD A6-6400K
MOBO: Gigabyte GA-F2A75M
RAM: Kingston 8GB
Storage: 2x 1tb WD Blue
GPU; Gigabyte GTX 650
PSU: Corsair 600w
Optical Drive: LG GH24NS95
Case: Corsair 200r
Operating system: Windows 8

IPConfig /all: (Will get when I find something to transfer over the info)
 

A:"Unidentified Network - Limited" and "Ethernet doesn't have a valid IP configuration"

16 more replies
Answer Match 108.6%

Hi.

I accidentally pulled the plug out of my computer when it was in the middle of shutting down. Now that I've tried to reboot it, I get a screen saying:

Safe Mode
Safe Mode With Networking
Safe Mode With Command Prompt
Last Known Good Configuration
Start Windows Normally

Whenever I click on any of the options above, I always ends up back at the same screen, suggest the above options again. I've tried rebooting I again a few times but nothing works?

Any ideas?
Thanks.
 

A:Stuck on "Safe Mode"/"Last Known Good Configuration" Screen

6 more replies
Answer Match 108%

I used this "hide a folder" program called "folder lock," and I guess it's buggy because it won't let me unhide the files. It unhides the folder containing the files, but the files are still hidden. They're still there, because when I copy and paste the folder, it shows that the files are being copied, but in the new folder they will be hidden again. Checking the "property" of the folder shows the correct size as well. How can I get windows to reveal them?

The hidden files are listed in this folder called "n|+|-n" or something like that I think, but when I type that in dos or windows it won't let me access them.

PS I contacted the company, but I don't expect a response back any time soon and those files are kind of important.

Thanks!
 

A:How to "unhide" a folder hidden by a "hidefolder" utility?

Welcome to TSG....

And of course you did not or don't have any backups of these files on any other media?

Actually the only way to gain access to these files is by contacting the manufacturer of the security program ir you would have to learn how to program good enough to bew able to get into the secure area. To the best of my knowledge since this is a security thing and we have no way of knowing whether or not you actually have the rights to get into these files I doubt if you will get much direction toward solving your problem.

Go with contacting the manufacturer of the software.
 

1 more replies
Answer Match 107.7%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Answer Match 107.7%

Windows 7 Pro, 64-bit, boots up and runs fine as long as "Windows Search" is NOT checked in "Services".

When I run msconfig in the Services Tab, that is the Windows Search checkbox that I'm talking about.

If the box is checked, computer will start up, allow me to click on my user icon and load everything as if it's ready to go. The cursor moves with the mouse but does not respond to mouse clicks, also the computer does not response to the keyboard. If I click the start button, I get the spinning round wait icon (or whatever that is called). It also runs fine in Safe Mode.
I tried sfc.exe /scannow I have all the latest windows updates. I have run several different anti-virus, anti-malware programs. I ran chkdsk. Do I need Windows Search checked in Services? What does Window Search do? Is that where you can search from the Start Button area?

A:boots up then freezes when "Windows Search" is checked in "Services"

Which flag did you use with chkdsk - /F ?? My first guess is that Search is trying to index and snagging on something - either a file system problem or bad disk sectors. The /F flag deals with the filesystem. If you haven't tried /R, for sectors, do so, but only after backing up important data, and perhaps taking a system image if the system's current state is valuable to you. I prefer to run chkdsk from a WinPE/RE boot disk so I can study its output at leisure.

9 more replies
Answer Match 107.4%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Answer Match 106.8%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Answer Match 106.2%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Answer Match 106.2%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Answer Match 105.9%

Hi All,


I was just tweaking some services just then and notice that since i have installed SP3 v.5512 that the "Server" service has dissappeared from the services list. Has anyone else noted that?? or is my XP bugged

Looking forward to your replies,



Aaron

A:"Server" Service deleted from "Services.msc" with the release of SP3???

Quote:





Originally Posted by harrisball


Hi All,


I was just tweaking some services just then and notice that since i have installed SP3 v.5512 that the "Server" service has dissappeared from the services list. Has anyone else noted that?? or is my XP bugged

Looking forward to your replies,



Aaron




I have "SERVER", alive and well, even after installing SP3.
I really don't use it though and have it set to "Manual".

I just checked and I was able to 'Start' and 'Stop' Server.

Big Mystery!

Shadow

2 more replies
Answer Match 105%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Answer Match 104.7%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Answer Match 103.8%

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\i... Read more

More replies
Answer Match 103.8%

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\sy... Read more

A:"Your System Is Infected" Background + "Internet Security 2010" virus/malware problem

Hi and welcome to TSF.

I'm afraid HijackThis no longer provides the information we require.

We want all our members to perform the steps outlined in the link given below, as far as they possibly can, before posting for assistance.

http://www.techsupportforum.com/f50/...lp-305963.html

If you have problems with any of the steps, simply move on to the next one and make a note of the problem in your reply.

Please note that the Security Forum is always busy, so I would ask for your patience while waiting for a reply - it may take a few days.

This thread will now be closed.

1 more replies
Answer Match 103.8%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Answer Match 103.8%

Hello all, I found your site searching for info on a service named IPRIP. Symantec's site says it's a backdoor trojan, but my virus program doesn't detect it. In the services configuration it's named iprip, no description & start up is auto. Under properties-general-path to executable C:\WINDOWS\System32\svchost.exe -k netsvcs.
dependencies-none
I searched my files & found file NETIPRIP.INX-Route Listening Service.
I found several conflicting answers on this & I would like to know the correct one.
Any help would be greatly appreciated.
 

A:Solved: "iprip" in services configuration-XP Pro

12 more replies
Answer Match 103.5%

Good Morning,

I would like to introduce myself. I am new to the forum. Should I address an issue inappropriately, kindly alert me.

Most recently, I have experienced multiple PC issues. Recently, I performed a System Recovery and encountered the following ?

1. Cannot perform a SYSTEM RESTORE. The message is: ?Restoration Incomplete. Your computer cannot be restored."

2. When I booted up this morning, and DID NOT HAVE A DESKTOP.
The screen was blank ? no Icons.

3. The items below are APPEARING IN MY TEMP FOLDER, and are located at: C:\DOCUME~1\COMPAQ~1\LOCALS~1\Temp:

........a. 415303181927525125.tmp
......... plus similar numbers.

........b. IswTmp
........c. msohtmlclip1
........d. msohtmlclip

I delete the above items through safe mode but they re-appear.
** I am MOST CONCERNED ABOUT Items 1 & 2.

SYSTEM SPECIFICATION:

? (DESKTOP PC) Windows XP
? (SP3) HP Compaq Presario 061 - Media Center Edition,
? AMD Athlon (m) 64 Processor / (X 86-Based PC - 32-bit package)
? MOTHERBOARD Chipset - ATI RADEON XPRESS 200 CHIPSET
? Version 5.1 / 2600 Build Processor

** If someone would give me some feedback, I would appreciate it tremendously.
** THANKS IN ADVANCE.

Kind regards,
AJ

A:NO DESKTOP after booting up & SYSTEM RESTORE "Incomplete" & "Strange" Temp Files

Usually when the machine has a "blank" desktop, the boot/startup process has been interupted or is frozen to before Explorer is launched.

You can launch Explorer manually be navigating C:\Windows and double-clicking "Explorer".

If successful, do the following:

Start>Run>(type) "msconfig" and turn off all non-MS services and all startups.

Then, Start>Run>(type) "cmd", and at the command prompt type "chkdsk /f" and schedule a chkdsk to run on next reboot.

Reboot system and report results.

3 more replies
Answer Match 103.5%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Answer Match 103.5%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Answer Match 103.5%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Answer Match 103.5%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Answer Match 103.5%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Answer Match 103.5%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Answer Match 102.9%

Dear Experts,

I have created windows image on Drive F: but delete it after some time manually due to some space prob.
But while backup shows about 40 GB only few GB space got free after deletion. When i try to again take the the backup using windows 7 backup & restore option, its still shows 35 Gb of System Image in drive F: when i brows the Manage Disc Space option but i cant find it on the same drive. (Plz see attached pic)
Plz help me to locate this and delete the same.

Thanks

A:Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"

Hello sattyaji, and welcome to Seven Forums.

It may still be showing if the system image was created as part of a Windows backup. Using the tutorial below to reset Windows Backup should clear it for you, but you will need to set up your backup again afterwards.

Backup User and System Files - Reset to Default Configuration

Hope this helps,
Shawn

5 more replies
Answer Match 102.9%

First off, thank you for any assistance in advance.

Problem: "System Alert" balloon in tray icon that will not go away and redirects me in IE 7 to hxxp://www.virprotect.com/?aff=1012.

Using SpyBot Search & Destroy and Ad-Aware SE, I seem to have gotten rid of the problem of the redirection of my home page as well as removed the trojan that caused all of this in the first place (I think). The pesky balloon, however, remains. All pre-steps your forum recommeded have been completed. Below are the logs your forum requests in advance (please note that my DSS "extra" log file is attached):

PANDA ACTIVESCAN
===============

Incident Status Location

Potentially unwanted tool:application/myglobalsearch Not disinfected c:\program files\MyGlobalSearch
Spyware:Cookie/Atlas DMT Not disinfected... Read more

A:[SOLVED] Trying To Remove "System Alert" Balloon That Directs To "virprotect.com"

Download SDFix from here and save it to your desktop.


Please then reboot your computer in Safe Mode by doing the following :
Restart your computer

After hearing your computer beep once during startup, but before the Windows icon appears, tap the F8 key continually;
Instead of Windows loading as normal, a menu with options should appear;
Select the first option, to run Windows in Safe Mode, then press "Enter".
Choose your usual account.

In Safe Mode, right click the SDFix.zip folder and choose Extract All,
Open the extracted folder and double click RunThis.bat to start the script.
Type Y to begin the script.

It will remove the Trojan Services then make some repairs to the registry and prompt you to press any key to Reboot.
Press any Key and it will restart the PC.

Your system will take longer that normal to restart as the fixtool will be running and removing files.
When the desktop loads the Fixtool will complete the removal and display Finished, then press any key to end the script and load your desktop icons.

Once the desktop icons load the SDFix report will open on screen and also save into the SDFix folder as Report.txt
(Report.txt will also be copied to Clipboard ready for posting back on the forum).

Finally paste the contents of the Report.txt back on the forum.


=========================================

This will help to identify malware on your system.
Please download Combofix from any of these locations:
... Read more

9 more replies
Answer Match 102.9%

I have been getting these "Bad Pool Header" and "System Service Exception" BSODs for about a day now (the "Bad Pool Header" one tends to pop up more often then the other btw). I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. The BSODs tend to occur more often when I am playing a game or running some program that uses a bit more memory but it also happens when I am just on the internet. On the other hand, last night I did nothing but surf YouTube for 3 hours and didn't get a BSOD at all. However, since then I haven't been able to do anything for more than 10 minutes (without being in safe mode) without it crashing, and this morning it completely froze until I turned it off. My OS is Windows 7 Home Premium 64bit. It came preinstalled from the manufacturer and unfortunately I do not have the install disc. The entire laptop is less than 2 years old and there have been no major hardware changes and I have never reinstalled the OS.

A:Random "Bad Pool Header" and "System Service Exception" BSODs

UPDATE: Another BSOD just happened after I left the computer idle for a couple of hours except this one said something about Asdsm.sys.

4 more replies
Answer Match 102.9%

Which one should I do? I originally wanted to just do "Return computer to factory condition" but Theog just suggested "Use A System Image Created Earlier." I have no idea what to do. So confusing!

A:"Return computer to factory condition" or "Use A System Image Crea..."

Hello M4TE and welcome to Seven Forums. Sorry for the delay in responding but I just came across your question.

Most newer manufactured computers have a hidden recovery partition on the hard drive. The manufacturer provides specific instructions on how to access that partition in case you want to restore your machine to the exact condition it was in when it left the factory. That means you'd have to go through the time consuming process of cleaning out factory bloatware (like free trials of programs you'll never need), installing programs you do need, updating everything, creating your personal settings, etc. Here is a general idea of how to access the hidden recovery partition.

HP Recovery From Partition

Let's say it took you a day or two to set up your machine to your liking using the hidden recovery partition. A System Image is like a snapshot of your entire hard drive. It will include everything from the operating system to all your programs, files, photos, music, all updates ... everything. Most folks keep it on a separate external hard drive. Let's say a week later you get a virus or your machine crashes for some reason. You can use that System Image to return your machine to the exact condition it was in when you made the image. Usually takes about 30 minutes or so and you're back in business. It's a lot faster and more convenient to only worry about a week of updates compared to probably months with the hidden recovery partition. The newer a System Image is the... Read more

1 more replies
Answer Match 102.9%

I have been getting these "Bad Pool Header" and "System Service Exception" BSODs for about a day now (the "Bad Pool Header" one tends to pop up more often then the other btw). I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. The BSODs tend to occur more often when I am playing a game or running some program that uses a bit more memory but it also happens when I am just on the internet. On the other hand, last night I did nothing but surf YouTube for 3 hours and didn't get a BSOD at all. However, since then I haven't been able to do anything for more than 10 minutes (without being in safe mode) without it crashing, and this morning it completely froze until I turned it off. My OS is Windows 7 Home Premium 64bit. It came preinstalled from the manufacturer and unfortunately I do not have the install disc. The entire laptop is less than 2 years old and there have been no major hardware changes and I have never reinstalled the OS.

A:Random "Bad Pool Header" and "System Service Exception" BSODs

UPDATE: Another BSOD just happened after I left the computer idle for a couple of hours except this one said something about Asdsm.sys.

1 more replies
Answer Match 102.9%

hi every body
My PC has lots of files called "Thumbs.db" & "System volume information" in all its drives.I cant delete these files and I think the cause of shutting my pc down automatically and showing blue screen is these files.the operating system is win xp/sp2.
I don't know what to do with these and what anti virus will delete them.please help me.
thanks
 

More replies
Answer Match 102.9%

Using "System Performance" DCS reports some events are lost. To fix it, I need to increase buffer size but I can't do it because all parameters are disabled. 
When I create custom DCS with same trace (based on "Windows Kernel Trace" provider) I increase num of buffers and everything works fine.
How can I change it for "System Performance"?

More replies
Answer Match 102.9%

I'm looking for an application that would let you automatically set which "services" start with windows. For example, one guy maintains a list of the various services that autostart with windows and whether they're needed and he specifies several sample configurations ranging from "safe" to "super tweak" based on how many unnecessary services you disable.

http://www.blackviper.com/WIN2K/servicecfg.htm

What I was thinking would be extremely useful would be a utility that would automate this process. You could select, for example, "super tweak" and hit apply and it would configure windows service options for you. That would be an awesome utility for the pctech to have available as it would enable quickly improving the users resources, particularly good for users who's systems have low RAM and who are experiencing bottlenecks. I'm sure someone with some programming knowledge could make such a utility. If anyone knows where I could get something like that please let me know! : )

Thanks!

Hmmm...just thinking about this. Could I record a Macro of some sort? You know, manually edit the "Services" settings while "recording" the macro and call it "supertweak" and then do it again with a different configuration and a different name, etc, etc...then play those back on each machine I wish to configure. Would that work? Which program could I use?
 

A:Windows "Services" Utility???

Please don't duplicate post:

http://forums.techguy.org/showthread.php?postid=596324#post596324
 

1 more replies
Answer Match 102.9%

I'm looking for an application that would let you automatically set which "services" start with windows. For example, one guy maintains a list of the various services that autostart with windows and whether they're needed and he specifies several sample configurations ranging from "safe" to "super tweak" based on how many unnecessary services you disable.

http://www.blackviper.com/WIN2K/servicecfg.htm

What I was thinking would be extremely useful would be a utility that would automate this process. You could select, for example, "super tweak" and hit apply and it would configure windows service options for you. That would be an awesome utility for the pctech to have available as it would enable quickly improving the users resources, particularly good for users who's systems have low RAM and who are experiencing bottlenecks. I'm sure someone with some programming knowledge could make such a utility. If anyone knows where I could get something like that please let me know! : )

Thanks!

Hmmm...just thinking about this. Could I record a Macro of some sort? You know, manually edit the "Services" settings while "recording" the macro and call it "supertweak" and then do it again with a different configuration and a different name, etc, etc...then play those back on each machine I wish to configure. Would that work? Which program could I use?
 

More replies
Answer Match 102.6%

Hello,
First let me tell you about my system.   This is an Inspiron
E1705/9400 laptop with the T7400 Core 2 Duo processor running at 2.16
GHZ.   It has 2 GB of RAM and a brand new 500GB Hitachi Travelstar hard
drive (7200 RPM).   It also has the GeForce Go 7900 GS video card.   
It previously had Windows XP Professional (32 bit) and worked fine.  
But, I have three computers in my home and home office and would like
them all to work better together on my wired home network, so I am
upgrading all three to Windows 7.   My two desktops (one is Dimension
XPS 420 and the other is Dimension XPS 430) seem like they will be no
problem to upgrade to Windows 7.   But, this laptop was not listed on
Dell's Windows 7 Compatibility List.   However, the Windows 7 Upgrade
Advisor that I downloaded and ran seemed to say that it was OK to do a
clean install of 32 bit Windows 7 and it only had a few minor concerns,
where it said to check for updated drivers from the manufacturer.   The
laptop originally came with a 100GB hard drive.   For my use, that is
getting very small, so I decided to get the same exact 7200 RPM drive
in the 500 GB size.   This will allow me to do a clean install of the
32 bit Windows 7 OS on the new hard drive and not have to wipe the old
drive to do it.   I can just hold onto the old HD and stick it back in
whenever I might ... Read more

A:Minor Problem with New Windows 7 Installation on my Inspiron E1705/9400 - two entries for "Base System Device" under "Other Devices" with yellow exclamation point

BTW, I just downloaded and installed the driver pack from that ftp location and it worked, even for Windows 8.1 - 64 bit.
Thanks Steve!

Roger

9 more replies
Answer Match 102%

Hi

New installation of windows 7 ultimate 32bit and on trying to copy a 38gb folder from c drive to d drive, pc gives bsod.
Lately playing world of tanks is resulting in system lock ups,please can anyone help

Frosty

A:bsod copying files from "c" to "d" drive and system lock ups

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

2 more replies
Answer Match 102%

Hello All,

I started a few weeks ago on the PowerShell programing and I got my answer from here only. So am putting up the error that I am getting now to get some help again.

Scenario : I wrote a script that checks a Folder on a server and counts the number of files in it.Then when it finds the resulting number to be more then a specific value(threshold) it sends up a mail to the required alias. To break it all along the portion to send a mail is generated through DBmail using another .PS1 file.

In the PS1 file containing the main checking of number of files I am trying to pass 2 parameters :

1. Folder path on the server
2. the Threshold value of number of files

Now when I created a job to run this powershell script as :

& "C:\PowerShell\Power.PS1" \\XXXX\\c$\Documents and Settings\ABC\Local Settings\Temp 10


IT fails with the error :

A job step received an error at line 1 in a PowerShell script. The corresponding line is '& "C:\PowerShell\Power.ps1" \\XXXX\\c$\Documents and Settings\ABC\Local Settings\Temp 10'. Correct the script and reschedule the job. The error information returned by PowerShell is: 'Cannot convert value "and" to type "System.Int32". Error: "Input string was not in a correct format." '. Process Exit Code -1. The step failed.


I really can not move forward on this.

Please help.

A:PowerShell issue ('Cannot convert value "and" to type "System.Int32")

Just to add for reference Below is the code for the Power.Ps1 file that I have used :


param
(

[string] $directory_string,
[int] $benchmark

)

$date=get-date
[int]$directory_file_count = 0

# check that the directory exists.
$does_directory_exist = (Test-Path $directory_string)


# if it does, then continue
if ($does_directory_exist)
{


# Check for the number of files on the directory
$directory_file_count = (get-childitem $directory_string -name -recurse).count

# If number of files exceeds the limit, send mail to notify

if($directory_file_count -gt $benchmark)
{
& "C:\Powershell\DB_mail.ps1"
$subject= "XXXX"
$body= "XXXX"

}

else

{
& "C:\Powershell\DB_mail.ps1"
$subject= "XXXX"
$body= "XXXX "
}

}
else
{
& "C:\Powershell\DB_mail.ps1"
$subject = "XXXX"
$body = " XXXX"
}

5 more replies
Answer Match 102%

I've run SuperAntiSpyware, Ad-Aware, SpyBot and Norton which removed some trojan files and registry items but I'm still getting pop-ups ("Security System Warning" and "System Integrity Scan Wizard"). Below is my HiJackThis log. Thanks in advance!
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:00:21 PM, on 4/2/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Common Files\Symantec Shared\AppCore\AppSvc32.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\system32\cisvc.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Microsoft SQL Server\MSSQL$VAIO_VEDB\Binn\sqlservr.exe
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\WINDOWS\system32\cryptainersrv.exe
C:\WIND... Read more

A:"Sys Integrity Scan Wizard" & "Security System Warning" Pop-ups

Hi Welcome to TSG!!
Please visit this webpage for instructions for downloading and running ComboFix.

Post the log from ComboFix when you've accomplished that, along with a new HijackThis log.
 

1 more replies
Answer Match 102%

With EaseUS Backup Tool, I've cloned these two partitions ("System Reserved" and "C") to same-sized partitions on a external HDD ("X" and "Y"). Picture tells it concisely:
How to make drives "X" and "Y" boot-able?

In "Disk Management", I've noticed these partition labels missing:"X" (or "System Reserved") is missing System label,
"Y" (or "OS") is missing Boot, Page File and Crash Dump labels

Thank you!

A:Both "System reserved" and "C" partition cloned to external HDD: boot?

You cannot boot Win7 on external HD, unless it is connected via eSATA.

9 more replies
Answer Match 102%

There are 2 devices in the "Device Manager" that do not have drivers installed.

I just did a clean install of Window 7 SP1 32-bit to a Dell Latitude E6500. I have uploaded all the Windows updates and all seems to be performing well. However, there are two devices in the "device manager" that do not have drivers installed, and I can't determine what the devices are nor how/where to find the drivers for them online or elsewhere. The driverless devices are "Base System Device" and "Broadcom USH". When I look at the properties page of both devices, it says that the Base System Devices location is "PCI bus 3, device 1, function 3", and the Boradcom USH's location as "0000.001a.0002.001.000.000.000.000.000".

The laptop did NOT come with a drivers installation disk.

QUESTION: How can I identify what these devices actually are and, more importantly, how can I obtain the driver for them?

A:Can't ID driverless devices "Base System Device" and "Broadcom USH"

Well, as for the second part of your question......... have you tried using windows own driver update utility? Right click on the yellow exclamation point in Device Manager, choose update.

I'm thinking your "boradcom ush" is this, drivers for it are here too, :Broadcom USH - USB\VID_0A5C&PID_5800 - awdit - The driver, software, & hardware database

4 more replies
Answer Match 101.4%

As the above title describes ""Local Area Connection" doesn't have a valid IP configuration"

I've tried every possible fix. CMD -> ipconfig /release - ipconfig /renew - reboot computer, nothing happens.

On the Network Sharing Center - I get my Network shown as "Unidentified Network."

I tried Uninstalling and Re-Installing the NIC, no luck. Updating the Driver didn't help either as it says it's up-to-date.

I've tried manually assigning the IP address, but I don't think I did it correctly, as I am quite new with Networking problems and especially with all the IP addresses', DNS, DHCP. etc. So I need support with that and try it out whether that fix will work, although I doubt at this point since I tried everything.

I tried disabling the IPv6 as well that did nothing too.

I also RESET my router, which also had no affect. I am using the VIRGINMEDIA SUPER HUB ROUTER. It's a Fibre Optic Connection.

I also called my ISP, they suggested the Internet is all stable and has no connection problems. The Technician I spoke to over the phone said that there is something at fault with my computer itself and not the Router or Internet connection. In other words, my NIC.

My wireless connection works without any issues, but when I plug-in my Ethernet Cable on the back of my Computer (Motherboard) it does not detect any Internet Access and I get the " Unidentified Network." When I troubleshoot it gives me that error whic... Read more

A:"Local Area Connection" doesn't have a valid IP configuration" Error.

Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Then: check your browser's settings, remove any proxy settings if found here's how.

Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type type the following command: IPCONFIG /ALL

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

Right click in the command window and choose Select All, then hit Enter. Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

19 more replies
Answer Match 101.1%

Hi:

Looking for insight/advice re: KB3054476.

According to Infoworld, it was "Optional" in May, but I was not offered it then.
This week, it was offered as "Important" and "Recommended" (!), but only for one of my 2 Win7/64 boxes.

I have read the MS KB article, as well as THIS FORUM THREAD, the latter of which includes a report of a BSOD due to this particular update.

However, there isn't much out on the web about it.
And most of the discussion about it is overly technical for me.
And I am confused as to why it was previously offered as "Optional", but now is "Important" or "Recommended".

I don't *think* I "need" it (as I have no webcam on this box). And I don't like to tempt fate by fixing things that are not broken.

So, 3 questions:
Is it safe to install?
Is it really necessary/important?
Or would I be OK to hide it?
Thanks very much in advance!

A:KB3054476 offered as "Important"/"Recommended"/"Optional"

The status of updates changes with circumstances.
If an update isn't relevant, it won't be offered at all.
If however it's relevant but the related software is not apparently in use, it may be 'optional' - and gravitate to 'Recommended' or 'Important' if the related software is in use.
It can also be promoted through the hierarchy by MS depending on feedback through WU and error-trapped feedback.


If you have (and use) a webcam, then it's probably best to install the update.

4 more replies
Answer Match 101.1%

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

A:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

3 more replies
Answer Match 101.1%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

A:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

1 more replies
Answer Match 101.1%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

A:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Answer Match 101.1%

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

A:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

1 more replies
Answer Match 101.1%

hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane

A:Remaking "My Music", "My Pictures", "My Videos" folders

  
Quote: Originally Posted by Legume


hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane


You have a backup from before the problem started? a win 7 dvd to do a repair install?
ken

4 more replies
Answer Match 100.8%

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

More replies
Answer Match 100.2%

Hi All,

Is there an easy to "split" a 40 Gb user file area into ten 4 Gb "chunks", for the purpose of backing up onto ten DVDs? In other words, is there an easy way to copy a 40 Gb file area onto ten DVDs?

Operating System is Windows 7 Enterprise (64 bit).

Thank you for your time and help,
Best regards,
James

A:"Splitting" 40 Gb user file system into ten 4 Gb "chunks"

Perhaps if you save to a FAT32 formatted partition.
This is automatically done by image backup software such as Macrium and Acronis.

6 more replies
Answer Match 100.2%

Hi TSG

My comp was messed up so I decided to clean reinstall xp pro, my hard drive was split into 3 partition, C, E backup and L photos and bits, at the point of the install were you decide,delete our make partitions, I decided to delete L as it was not needed and clean install onto C, leaving E with my docs and data, the install went fine, when I looked at my drives in admin tools the C is marked boot and E system, I was going to delete E and make new partitions, but because it marked as system, can not delete it. How did I do this and is there away to put it all back onto C, without reformatting.
 

A:Solved: partitions "boot" and "system" after xp install.

6 more replies
Answer Match 100.2%

Hello all i need your help when i play world of warcraft and watch videos my computer will crash and go to a blue screen and say Bluescreen "hardware malfunction" "the system has halted" anyone kno what i can do?

 

A:Bluescreen "hardware malfunction" "the system has halted"

8 more replies
Answer Match 100.2%

When installing SP2 on my computer, there was a box that recommended "Backing up my system" before proceeding. So I created a restore point. I will install it on my daughter's computer next, and would like to know if I was supposed to do anything fancier than creating a restore point before installing SP2?
 

A:Does "Back up your system" mean "Create a Restore Point"?

16 more replies
Answer Match 100.2%

After last night i have re-turn on my computer about five minutes ago............ i see on "My Computer" i have a new "strange" system drive named F: (C and D it's my HD... E it's dvd burner) whit label "SYSTEM" and i have tryed to access and result inaccessible.
The size it's about 100MB and 47,2 it's be filled but i can see what's inside and i don't have idea what's is that............. i thinks it's possible there's sometighs like a "hidden" partition but i don't even idea because now it's appears on "My Computer".
Yesterday and last night (before i go to sleep and turn off this same pc) there's no listed here................
If it's necessary i can post some pics.... or info about it... apparently there's a FAT32 partition.........

*EDIT*
I can add this info about this:
i have opened the diskmgmt.msc and here i can't see nothings about this newest drive F:.... look at here:
And here the the disk manager.. no F: appears:

A:Strange "SYSTEM" drive has been appears on "My Computer". What's it's?

See:

what is F System directory that suddenly appears in Windows 10

1 more replies
Answer Match 100.2%

All of the sudden my "System Volume Information" folders (the system restore folders) on all of my hard drives are shown even when viewing hidden files is off. Tried to mark them hidden, but it won't let me. Anyone have a clue as to why they would suddenly unhide themselves and not allow me to hide them again? This is on XP Pro with no service pack1 installed. Just bugs me they did that all of the sudden. Haven't installed anything recently except Paint Shop Pro 7 and Easy CD Creator 5.2 plus the update patch to 5.3.

Thanks,

Smith
 

A:"System Volume Information" folder won't go "hidden"

11 more replies
Answer Match 100.2%

I am trying to remember the name of this program I used in tech school that would analyze a computer and then give you a detailed summery of all the hardware in the computer, all the way down to the kind of RAM you had in the machine. Any ideas?
 

A:Solved: Looking for a "system information" type utility to tell me about all my hardw

6 more replies
Answer Match 98.7%

Hello everyone
I have this problem for more than 3 months for now...

The INSTRUCTION AT "0x00a96ce0"referenced memory at "000000000" couldn't be written".

That's always what i get when i restart my computer,just before screen goes dark.
I believe that it has to do something with Microsoft updates.The reason i believe this, is that i once reinstalled my PC and didn't have any problem until i didn't update my PC.
And i posted here that thinking my problem was solved but unfortunately i was wrong.

Please if you have any tips on this one let me know it would be greatly appreciated.

Thank you!
 

More replies
Answer Match 98.7%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Answer Match 98.7%

On boot up the laptop beeps twice and the message "system configuration data read error" appears with F1 to resume or F2 to setup. If I hit F! it boots up as normal. When I switch off and reboot the same ting happens every time...help its driving me crazy !!

More replies
Answer Match 98.4%

In the "SYSTEMS CONFIGURATION" window, under the "Startup" tab I have a few entries of unwanted software items that need removing.

e.g. Radiorage, Conime, Logitech (no Logitech devices attached now)

and some Unidentified software that looks a little suspicious

How and where can I delete these items safely (Registry using REGEDIT) ??

Thanks
JDB007

A:How to change entries in the "System Configuration" window?

Welcome to the Seven Forums.

Start with Control Panel > Programs and Features.

Uninstall anything that you don't need, then let us know if things still show up on that Startup tab that you don't want.

For suspicious stuff, look at this post:
Process Explorer 16

9 more replies
Answer Match 98.1%

The title is the very short version of my dilemma.... Also, I used to be a tech for a small business and got pretty intimate with repairing tweaked OS's. I'm really opposed to doing a clean install, since I have the machine working other than this infernal issue....

Anyway, I had a power loss a few months ago, and ever since I'd had issues with corrupted permissions on files. Apparently permissions also got corrupted on my services. I ran a repair install (went fine), but still have access denied to EVERY windows service. I've tried this from a new account and from my account (an administrator account). I tried creating a new account, but it couldn't even log on.
I can't even open the properties tab in computer management.... but there are some nifty commandline tools that I've used.

I used accesschk to check permissions on my system services - the result confirms that I'm somehow being denied access to every system service. I tried using the "secedit" command to load a default security descriptor ............
SWEET! I just re-ran the secedit command with different parameters, and it WORKED! All my security descriptors have been reset, and I just went from getting "access denied" to the RPC service starting. Let's see if this survives a reboot....

What I typed was:

secedit /configure /overwrite /db "c:\windows\security\database\service pack 3.sdb" /log C:\sdbLog.txt

This worked ^^.

Typing seced... Read more

More replies
Answer Match 98.1%

Hello all, I am encountering the following issue when trying to install XTU, "verify that you have sufficient privileges to install system services".

I am trying to install on a newly purchased Asus ROG G751JT running Win 8.1. I have been trying to sort this out for days and its driving me crazy!!
I have tried everything I know over the past 24 hours but to no avail and your help would be much appreciated.
 

A:Installing XTU, "verify that you have sufficient privileges to install system services"

XTU? What is this?
 

1 more replies
Answer Match 97.8%

Hi - I have a thinkpad x61t. When it's in the docking station, whenever I press "shift" "alt" or "ctrl" a little pop up window tells me that key is being pressed. The laptop does not do this when it's out of the docking station. I've looked all over the control panel in vista and can't find any setting.

Any ideas how to switch it off? Driving me nuts! Thanks.
 

A:"shift", "alt", "ctrl" appear onscreen when pressed (see pic)

You mentioned that you have looked in the Control Panel so this may be something you tried already:

Control Panel - Ease of Access Center - Make the keyboard eaiser use - uncheck 'Turn on sticky keys'.
 

2 more replies
Answer Match 97.8%

OK...
I'm looking for some help getting rid of theses creeps!
I have tried several programs including Spybot, Spyblaster, Lavasoft, Mcafee, etc. etc. with no luck.
I'm new to HijackThis but here we go..... ]

Logfile of HijackThis v1.97.7
Scan saved at 11:59:09 AM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)SIZE=5]

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
G:\HijackThis.exe
G:\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Mi... Read more

A:(I'm new here) help w/ "xads", "xlime", "Context3.kanoodle"

hi pdx

please download the new hijackthis from here
http://www.majorgeeks.com/download3155.html


and install it in it s own folder like this :

C:\hjtantivirus\hijackthis.exe

scan again with the new hjt and post a new log .

1 more replies
Answer Match 97.8%

How do I change the font of "Welcome", "Logging Off" and "Shutting down"? Is it hard coded in a uifile? Which file are the words in? Is the file written in XML?? John

A:Change font of "Welcome", "Logging Off" and "Shutting down"?

  
Quote: Originally Posted by RBCC


How do I change the font of "Welcome", "Logging Off" and "Shutting down"? Is it hard coded in a uifile? Which file are the words in? Is the file written in XML?? John


I am not sure you can change the fonts though if you wish you can change the text from "Shutting Down" to "Bye Bye" or so, by editing, winlogon.exe.mui.

3 more replies
Answer Match 97.8%

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.
please help!!!!!!

heres the hijack log
(thanks in advance. i don't know much about this computer virus stuff.)
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\SYSTEM32\qttask.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

A:"windows no disk" and "winsilly" "win956temp"

11 more replies
Answer Match 97.8%

Hey everyone,

Unfortunately, my computer has been infected with a particularly virulent, or relatively new, virus (for which I am currently awaiting help on the Malware removal sub-forum). I wanted to ask, though, if anyone else has had to deal with this particular Trojan before because, from what I have been able to find out, it (i.e. Trojan_Win32.Generic, or "TidyNetwork.com") doesn't seem to have a remedy as of yet. I've checked just about every virus database I could and have come up empty handed every time. What's more, I've downloaded and ran half a dozen different top-shelf Anti-virus' scans and removal programs, only to end up disappointed.

Does anyone know what the deal with this thing is?

Best,

John
 

A:"Trojan_Win32.Generic" a.k.a. "TidyNetwork.com" & "Strongvault"

Please do not start another thread for the same issue.

I'm sure someone will be along to help you in your other thread soon.

Closing duplicate.
 

1 more replies
Answer Match 97.8%

Hey guys. This morning I got a really strange error code. When I tryed to update Steam on my PC, this error message popped up;

"The instruction at "0x00172058" referenced memory at "0x00d1004". The memory could not be "read".

Click OK to terminate the program.

Lately, I have'nt been able to install WoW either, I install it all the way to 100% and then when I try to launch it, I obviously have to re-download all the patches but it prompts me that I have to install it again, even though it is all there.

Tryed downloading the full game digitally off of wow-europe.com too, I click run to get it started, nothing happens and then this message pops up.

"The instruction at "0x00182058" referenced memory at "0x0f070014". The memory could not be "read".

Click OK to terminate the program.

I don't know what's up with it. My freind told me to run a CHKDSK /R to see if there was anything wrong with my drive and it ran smoothly, although I must say it took about an hour or so.

So, that was complete, tryed to do it again and I still kept getting these error messages. But I saw something on my desktop that wasn't there previously. It is an error log. Here is the error log;
#
# An unexpected error has been detected by Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d5ecb6d, pid=1584, tid=1248
#
# Java VM: Java HotSpot(TM) Client VM (11.0-b16 mixed mode, sharing wi... Read more

More replies
Answer Match 97.8%

One feature I really liked in XP was the ability to look in a folder through My Computer and sort the files by extension. For example if I wanted to get all .jpg files to one side of the folder as I looked for a file, I could click View, Arrange Icons By, Type and make that happen. I don't see that feature in Windows 7. I'm using W7Pro and can't find that or a similar feature anywhere. Is it here and I just haven't found it? TIA

A:Where is "VIEW", "ARRANGE ICONS BY", "TYPE"

open a window ,click organise/layout /menubar.
then when you click view in the menu bar group by is in the list

3 more replies
Answer Match 97.8%

Hello everybody. Here's my story. I have 2 HDDs:
1) 1TB with 2 partitions: System (where Windows 7 is installed) and Hard Disk (with programs)
2) 500GB with 1 partition: Storage (with all the unnecessary files I don't want to delete)

My problem is that the last partition became Active and System. It happened like that. I had some troubles with SATA cable so I had to disconnect my main HDD and connect DVD-Drive with that same cable and my main HDD with the one I used for DVD-Drive. What I didn't notive at first was that the 500GB hard disk became the first one in the boot row. After some time I noticed that Storage became my Active and System partition. I tried making the partition with Windows Active and making that one Inactive but I couldn't load the system after that, I had BOOTMGR is missing error, so I had to swich back with Paragon software. Any ideas how can I make my original System partition to be active and system and that useless partition to become simple data storage once again?

A:Partition is "Active" and "System" though it shouldn't be

Plug 1tb into first SATA port, mark it Active using Diskpart from Win7 DVD Repair Conosle or Repair CD, or use free Partition Wizard bootable CD. Then mark Inactive 500gb plugged into Disk1.
DISKPART At PC Startup
Partition - Mark as Active (Method Two)

Set 1tb on DISK0 as first HD to boot in BIOS setup, after DVD/CD drive.

Boot the Win7 DVD Repair console or Repair CD to Startup Repair - Run 3 Separate Times until Win7 starts on its own and is correctly marked System Active. You may have to unplug the 500mb HD if it interferes.

2 more replies
Answer Match 97.8%

About a month ago Computer Associates' internet security suite (free through my ISP) told me it couldn't update. Tried a couple of things and gave up. Uninstalled CA and installed AVG Free. Same thing. AVG Free can't update. Today I got a message "attention...trojan spm/lx...etc." with a prompt for a web page, but instead I closed the window from the top right corner. Today I also got a background on my desktop that said "your system is infected, system has been stopped due to a serious malfunction".

I started through some of the threads on this site, and was looking at a promising thread (855938-trojan-spm-lx-infection..) that cybertech posted and instructing kramer8886 to run malwarebytes. I installed malwarebytes and it opens but self closes in a matter of seconds (regardless if I hit quick scan or not).

Some additional symptoms:
1. Can't open computer in Safe Mode
2. Can't use "run" from start menu
3. Can't use volume on computer
4. Malware is redirecting my url choice to its own choices

This is the first virus that I can't seem to deal with myself. Any help is appreciated
 

A:Malware indicates "trojan spm/lx" and "your system is infected"

Windows XP operating system
It has also disabled my Task Manager and is currently running something in the background
 

2 more replies
Answer Match 97.8%

or i should say they open for a split second and then disappear. so i go to run and type in msconfig and the box opens and closes immediately. i go to control panel and click system and again appear/disappear. what to do???
 

A:"msconfig" and "system" boxes... can't open

16 more replies
Answer Match 97.8%

Newbie here. I have searched around for a while but have not found a post with my exact situation.

I just installed a new Seagate Momentus 500gb (7200rpm) SATA drive in my Lenovo X61 laptop and have been working on a installation of Windows7 Ultimate.

Not realizing this was an upgrade install disk, I tried to install Win7. I didn't know about the clean install method, so I started over with an installation of WinXP (slipstreamed to deal with the SATA drive).

Next, I ran the Custom Installation upgrade to Win7.

So far, it seems to be working ok.

However, the Local Drive is D: instead of C:. The System Reserved drive in labeled C:. Should I be concerned? Should/Can I change this?

Attached are screenshots of Disk Management and explorer window.

Thank you for any info.
-Nate

A:"System Reserved (C:)" and "Local Disk (D:)" ??

Try removing the System Reserved drive letter in Disk Management to see if Win7 claims C instead. It sometimes works.

There is no reason you can't operate with Win7 as D even though it is meant to always assume the C letter unless it's installer is run from another OS.

But if you do I would not allow a drive letter for SysReserved as programs can write to and corrupt it, especially the ability to make Win7 backup images.

Now that you know you can clean install Win7 without needing XP on the HD, I would strongly consider booting the installer to do a Custom install, choose Drive Options to Delete all partitions, Create new as you wish, then Format before installing to first partition after SysReserved it will create for you. The installer will see an OS at boot to allow use of Upgrade version key upfront during install.

Here are tips to get a perfect reinstall - use the ones which apply: Clean Reinstall steps

2 more replies
Answer Match 97.8%

Well, its my first post here and my english is not good, Hi all!
I've installed win7 ultimate 64bit yesterday and Iam having a annoying problem when System locale is setting to Japanese:
The standard "\" character in shortcut dialog box, for example was replaced with yen symbol (?)

Windows help said that it dont affect the language in menus or dialog boxes for windows or other programs that do use Unicode (see image below), then i dont understand why its changing this character, and well, I know that its visual only but i preffer my windows without this yen symbol and yet, being able to show correct characters in japanese applications

A:"" instead "\" when System locale is setting to Japanese

Sorting it all Out : When is a backslash not a backslash?

2 more replies
Answer Match 97.8%

Would like to not have UAC pop-up for files & folders on non-C: drives, so expect they need to have "full control". Default is Special Permissions. Is there a way to default to "full control" when new folders are created, or do I need to mod permissions for each one? Note that I am NOT talking about anything on the o/s drive C:.

A:Permissions for non-system, "user" drives; not "c:"

How about right clicking the non C drive - clicking Properties - Security tab? Setting full control there for the entire drive? Does that work for you bro?

Thanks,
Robo

9 more replies
Answer Match 97.2%

Hi, I'm having BSODs on my new custom PC build running Windows 10. I am sure this is probably just a driver issue but I'm unaware of how to figure out which driver.

I've uploaded the debug report. Please let me know if you have any ideas or help.

AJ-DESKTOP-Sun_06_19_2016_200102_65.zip

Thank you!

More replies
Answer Match 97.2%

Newly purchased Laptop with windows 8.1 OS preinstalled. We have successfully added this system to domain. While accessing the application after logging into the domain with Domain Credential, we found below attached error where  user is having local
admin previledges and  the UAC disabled.

A:"This application can't open" --- There is a problem with " application name" . Contact your system administrator about reparing or reinstalling it

Hi,
Firstly, please enable UAC and restart your computer to test if this problem resolved.
If problem persists, try to use APP troubleshooter to check APP problem, if there is any reports, please feel free let us know.
Windows App troubleshooter:
http://go.microsoft.com/fwlink/p/?LinkId=268423

Roger Lu
TechNet Community Support

5 more replies
Answer Match 96%

every time i try to open one of this folders a window apears with this content
cant have acces to C:\Documents and Settings\Mike\Local Configuration\{one of these folders} acces denied
this affects my IE i cant download nothing thru IE all my files on that locations i cant set dispaly pictures on WINDOWS LIVE messenger and all thinks that has anything to do with those folders
any suggsestions or idea
hope you can help me
pd ive scanned my computer and its all clean also i cant install windows XP serivce pack 2 im kinda stucked :/
 

A:cant open "temprorary files" "aplication data" "program data"

11 more replies
Answer Match 96%

"no audio device" "no playback device" "No Sound Card was found"
ok.. I'm stuck.. puzzled...

I recently had a professional computer fix it company wipe my computer and now I do not have any sound. I do not have even the little icon on the bottom left hand corner to turn volume up or down. My keyboard does not allow me to turn the volume up or down, it seems unresponsive to volume but does light up on the screen showing VOLUME... but of course, there is no volume... I am computer illiterate and thirsty for answers...

Operating System
Microsoft Windows XP Professional (5.1, Build 2600)
Media Center Edition Version 2002 Service Pack 3

System Manufacturer: HP Pavilion 061

System Model
Enclosure Type: Desktop
RC663AA-ABA a1640n

BIOS: Phoenix - AwardBIOS v6.00PG

Processor
Intel(R) Core (TM)2 CPU
6300 @ 1.86GHz (2 CPUs)

Memory: 2046MB RAM

DirectX Version: DirectX 9.0c (4.09.0000.0904)

Control Panel>Sounds and Audio Devices>Volume
indicates "no sound" and Device Volume is all the way to LOW and everything is GREY and untouchable/unchangeable

Control Panel>Sounds and Audio Devices>Audio
indicates "no playback devices" on Sound Playback

Sound recording is working fine as I use skype many times but I can not hear the other party but they can hear me just fine.

Starting with the BIOS, I went into Audio and made sure this was enabled.. it was...

downloaded/installed Microsoft... Read more

A:"No audio device" -- "no playback device" -- "no sound card was found"

STLj said:





<snip>
after RUN>
typing in "dxdiag"
DIRECTXDIAGNOSTIC TOOL>Sound
it reads under notes,
"No sound card was found. If one is expected, you should install a sound driver provided bv the hardware manufacturer".

This is where I get fuzzy and lost. Do I need a new sound card installed? Is that the problem?Click to expand...

That dxdiag "no sound card" message is misleading as I've found it says that if no driver OR sound card. I think you're missing the right driver

Also, it would seem from your post you have High Definition (HD) audio. Which means you'll need to find the right High Definition audio driver. (AC97 pre-dates HD audio so the Realtek AC97 couldn't be right)

Try starting on the HP support website HERE and enter your model number or they have a button where they'll try to identify your product and drivers for your model. They should list an HD audio driver there
 

1 more replies
Answer Match 96%

The System Fix Virus & Privacy Protection Virus hijacked and infected my system: WinXP (64-bit). They've caused my default web browser to change frequently (each time I reboot my PC). So I've been having trouble getting rid of all of this malware/viruses from my system, since I use Windows XP x64.

ComboFix.exe and TDSSKiller.exe are not compatible with my Windows XP 64-bit system. So how do I get rid of the malware/viruses from this computer without those apps that were made to get rid of the following problems on other Windows OS's?:

The latest version(s) of ComboFix and TDSSKiller don't work on the 64-bit version of Windows XP, but they are compatible with other versions of Windows: 98, XP, VISTA, 2000, 2003, 2008 and Windows 7!

1. System Fix Virus (the first virus that affected my Windows system, 2 days ago.)
2. Privacy Protection Virus (behaves almost exactly like the aforementioned virus)
3. Google-Redirect Malware (redirects all my searches to this site: 63.209.69.107)

Thanks in advance to ANY users for helping me and others with this malware/virus problem: I understand and read the previous pinned-thread about the revelant malware/virus issue that Windows-users solved with the programs I've been unable to install on my system. The aforementioned malware/viruses began to infect my PC on December 14, 2011 (since that day, I haven't found a single anti-virus program that can detect the Google-redirect malware/virus on my system).
&nbs... Read more

More replies
Answer Match 94.8%

I just upgraded from Vista Home Premium to Win7 professional x64 hoping to fix the above mentioned problem. After a complete re-install Im getting the same errors.

Im not sure of the proper terminology here, but during startup the computer does a scan of all hardware and "Volume 0" has a "failed" message.

The odd thing is that sometimes after a few restarts and pointless boot menu visits the computer starts up fine.

I tried windows repair feature by booting from the disk, but when I get to the window where i select the operating system to repair, its empty. Drive C, where the operating system is, is not showing.

I have a feeling that the hard drive itself has gone bad and is very unstable. Please let me know if I'm missing something or we just need to get a new HD.

Thank you

A:Win7 pro startup error "Boot MGR missing"/"Operating System Not Found

What type of hdd do you have. For example if you have a Seagate drive, there is software you can run to do a diagonostic on the hdd before the operating system boots.
This would be a good idea, especially if you were having same issues when Vista Home Premium was installed first.

Do you have more than one hdd installed. If yes, make sure in BIOS settings, the proper drive is selected for First Boot. And better yet make sure its the only drive attached when booting.

9 more replies
Answer Match 94.8%

I am hoping that someone can help me with what may be a complex question.

I have a spreadsheet, similar to the demonstration file I have attached. In it, there are a range of columns. One set of columns (A - D), shows a list of numbers that are references to items in a store, and it also shows their location in the store, so it acts as a floor-plan. The next column (E) lists those items again to show the dollar amount that those items have produced in total sales (F).

So, what I'd like to do is to add a conditional formatting to show me the "cold" and "hot" spots on the floor-plan so I can see where sales are most concentrated. I would assume that this would be done with a colour scale (using the range of values in column F to work itself out)?

Either way, the figures in column F would change weekly, so the relevant cells in columns A - D would need to automatically change when they're matching cells in column E - F change.

I hope this makes sense, as it's difficult to explain, but any help that someone could provide would be greatly appreciated.
 

A:Solved: Creating Cell "Cold" And "Hot" Spots Based On Values In Microsoft Excel 2007

16 more replies
Answer Match 94.8%

How to remove the "Authenticated Users" "Create Folders" permission from the root of the C Drive via command-line?
I know this question has been asked many times before, but nothing works for us!
We tried the following:
Take ownership: I cannot take ownership using the Administrator account (local and Domain Admin accounts) of the root C:. Error Access Denied
Cuurent root C: owner is TrustedInstaller and acnnot be changed.
We cannot change or remove the Create Folders permission of the Authenticated Users of the root C: . Error Access Denied.
Drive C: is hidden via GPO, but many users can enter it from the File-Explorer and create folders in the root C:.
We do not want -for many reasons- to Block/ Prevent Access to C: via GPO.
We also tried to run cacls and/or icacls under the system-account (PSEXEC -i -s -d CMD). Error Access Denied.
icacls C:\ /deny *S-1-5-11:(NP)(AD)
Error Access Denied.
icacls C:\ /remove:g *S-1-5-11
Error Access Denied.
cacls c:\ /e /c /R "Authenticated Users"
Error Access Denied.
Also using GPO "Computer Configuration\Security Settings\Restricted Groups ..." does not work!
Now we have this issue on over 450 pc's on our network. Nothing work. Please help! How to remove the "Authenticated Users" "Create Folders" permission from the root of the C: Drive on command-line?


win_builder

More replies
Answer Match 94.5%

Hi,

I'm using Windows 10 th2-10511 x64 and when I install EMET 5.5 final the EMET system service is installed with the "delayed start" flag and the service and never starts after a reboot. The same thing happened with the beta version, I didn't notice
it until the final was released. This issue doesn't occurs with EMET 5.2.
I switched the service back to the normal Automatic (not delayed) start, and everything seems to be working again. I was wondering if anyone else experienced this issue?


Also, can someone enlighten me about this warning message "DEP/ASLR Policy settings are ineffective by default; see user's guide on how to enable them". It appears when I enable the DEP/ASLR EMET GPO. I couldn't find any reference to this warning
message in the user guide. DEP seems to be enabled, I have no idea how to check for ALSR other than Process hacker that shows ASLR as N/A.
Thanks

More replies
Answer Match 94.5%

Hey folks,

My first post on here but I'm in serious trouble. I got a "new" (to me anyway) desktop running XP today and found the audio hardware wasn't working. So I pillaged an old machine for its sound card, and inserted that onto the motherboard. Also connected the Aux and CD lines to the top of the daughterboard.

Since then, to my horror, the machine has failed to boot. All plugged in, keyboard working, screen on and being used on another box for this very post. All I get now is the usual chirps from the internal soundcard followed by a few very low notes, definitely depressing so I guess they're suggesting something's failed. There's no further action from the CPU, the fan still works, but there is no screen output whatever.

Have I fried the motherboard without realising?!

Also, ironically, the last failure tone was delivered by my speakers through the originally non-responsive audio hardware!

I'd love a bit of help on this one, because my knowledge of computers' insidey bits is pretty poor.

Many thanks,

Joe.
 

A:Desktop boot problem after sound card "meddling"... just a "beep" failure tone.

6 more replies
Answer Match 94.5%

Ok where do I begin?! I have been dealing with viruses, spyware/malware for the past week. It all started with Norton advising me that I had been infected with Trojan. Vundo and Trojan.Zonebac. After that I started receiving many different pop ups warning me about critical system alerts. I also had an annoying yellow triangle at the bottom of my screen warning me about different trojans and worms. More evil friends included 2 new icons that had made their home on my desktop one named "Live Safety Center" and the other "Online Security Guide", also installed was a new toolbar named "Security Toolbar 7.1". I have scanned my computer with many different programs and have somehow finally managed to get rid of the pop ups and toolbar, although I know I'm probably still infected somewhere. I'm sorry this is so long but, I wanted to explain EVERYTHING! I'm running Windows XP SP2, and have followed all steps to post. I downloaded DSS, but after many attempts to run, it just wouldn't let me. I do have a fresh hijackthis log and my Panda report, I hope this is good enough.
Many thanks in advance to whomever helps me, I am desperate!
Monica

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:58:35 PM, on 11/15/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe... Read more

A:2 evil friends on desktop "Live Safety Center" and "Online Security Guide" Help?

Hi, thanks for trying to perform all the steps.


Quote:




I downloaded DSS, but after many attempts to run, it just wouldn't let me.




At what stage does DSS stop working?

7 more replies
Answer Match 94.5%

As this question was never answered I'll post it verbatim with my own comments below,
See original post here;
http://forums.techguy.org/windows-vista/756093-flash-drive-s-active-light.html

In all operating systems up to Vista, the flash drive's "active" light turns off when I go through the disconnect procedure; but, in Vista, it doesn't. I have traditionally used this as part of my explanation to others (and a convenience to myself) about when to not to remove the flash drive from its USB port.

This is a problem common to all Vista systems I've seen.

Why does the light not turn off in Vista?

And, is there an easy way to correct this?

Additional information: I have eliminated this problem being hardware-related. I have loaded Vista onto one of my systems here that previously had Windows 2000, then XP on it and it was only with the loading of Vista that the problem developed on this system. Just to be absolutely sure, I did a restore of a previous image of Windows 2000 and the problem went away again. I put Vista back on and the problem came back. So, this is strictly a Vista problem.Click to expand...

I have had the same problem with every Vista system I have used and every flash drive (note this means SSD NAND flash not HDD's or card adapters). AS the last discussion degraded into useless questions about hardware and other OS's let's get a confirmation that someone out there actually has a flash drive that turns its activ... Read more

A:Flash drive's "active" light doesn't turn off in Vista when "safely removed"

have done a litte research and testing in my lab on several machines and have confirmd the problem. What it seems to indicate to me is that, in Vista, the light simply indicates power, not data transfer. Whenever I am transferring data, the light blinks.

While I have never actually tested it, I do not belive that the "safely remove" feature actually kills all power to the USB port in XP. If that is the case, then there is really no danger as long as vista has acknowledged the disconnect and knows not to try to write data to the drive.
 

2 more replies
Answer Match 94.5%

Hi all,

I'm puzzling this one. In the folder options when I choose 'view' the radio button to show the hidden files is missing. I've already checked the registry at the HKLM/Software/Microsoft/Windows/CurrentVersion/Explorer/Advanced/Hidden

and everything seems ok (value for 'Type' is 'group' etc.). Using the XP tweak (Kelly's corner #155) shows the hidden files, but the button still missing.

Another thing that I encountered with was that from the start menu the "Help and Support" not working. Again, the registry seems fine, and the process is activated (started). This came up when I tried to use system restore option - with no success.

Virus scan didn't find alerts of any kind

To make a long story short- below is the log file of HiJackThis. Please review it and reply if you see something to be concerned with for repairing my computer.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:36:54, on 21-Dec-08
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16762)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\McAf... Read more

A:missing "show hidden files" button + "Help and Support" not working from start menu

Ok I found the answer (after quite a lot searching), as follows:

1. for the 'Hidden files' radio button - I used methods 1 and 2 from here-
http://www.technize.com/2007/05/13/s...s-not-working/

2. for the helpcenter I just reinstalled it as described here -
http://windowsxp.mvps.org/rebuildhelp.htm
note that the file 'dataspec.xml' is needed to be available for this, and it can't be done directly from the XP CD. The thing that worked for me was to insert the XP CD, and use the file that in my computer (C:\) and afterwards another file on the CD.

Again, all this happened with no virus detection, so I believe that there is no infection. However, if someone has remarks on the HiJackThis log I've put, feel free to add them.

Have a nice day,

Fitch.

1 more replies