Tech Problem Aggregator

BIOS Admin password recovery.

Q: BIOS Admin password recovery.

Hello All, I would like to know how can i remove my BIOS Administrator password, as far as i know i have never saved a password for BIOS ADMIN, but whenever i try to go to bios admin it asks for password that i do not know now. I need to make some changes, so how do i access bios setup now. when i enter 3 wrong passwords, it gives error system disabled and a number written below 66276313(somthing like that) Can anyone please guide me? have tried ho bios flash as well. Thanks in advance experts. Regards,Yousaf











Solved!
View Solution.

A: BIOS Admin password recovery.

Hi Try : 79640917

10 more replies
Answer Match 71.82%

I have a Dell Latitude D630. It has an admin password for the bios. Nothing is locked except for the settings. I can't change any of the settings in the bios. It lets me boot to windows just fine though. My question is, since I don't know that admin password for the bios, if I upgrade the bios firmware, will the admin password be deleted? Since I'm flashing the bios, I would think that all the settings will be lost. Is that the case?
 

A:Will upgrading the bios firmware on a Latitude D630 delete the bios admin password?

What?

Didn't you reply here, and say it worked (after the unusual 9th try ) http://www.techspot.com/vb/topic109612-109.html#post747024

Awfully strange!

A bios update can't remove passwords. As You Must Know

Oh and thanks for the extended long Title. I'm thinking this Topic of yours would be best removed? What do you think?
 

1 more replies
Answer Match 71.4%

How remove password BIOS(Admin password & canfigure setup),
 

A:Admin password & canfigure setup password in BIOS remouver

Turn off computer. Find the battery on the motherboard. Take it out for a couple minutes. Put it back in and restart computer. This should reset cmos and solve your problem.
 

1 more replies
Answer Match 71.4%

Right before this problem happened, I had suddenly experienced a weird screen glitch and knew to restart my computer. Now, it asks for a BIOS admin or power on password which I did not set. What the heck is going on, and what could I do to fix this??  --WHAT-I-HAVE-TRIED--I have tried "12345"I have tried a blank fieldI have tried "biosPower"-------------------------- --COMPUTER-INFO--Product: HP Stream Notebook 11 (no touchscreen)Product version: 8.1 (x64 architecture)---------------------- If I need to put any more info, just ask.











Solved!
View Solution.

A:BIOS "Admin Password or Power On Password" needed for startu...

@GlitchMasta47? At the password screen, hit enter 3 times and you should receive a halt code - enter this on the site below. https://bios-pw.org/ Regards, DP-K

9 more replies
Answer Match 70.98%

Call me a dunce....but I have a problem. I locked myself out of my administrator account and I can't go into safe mode because I also forgot my BIOS password. I really don't want to have to open up my computer and remove the BIOS, is there any other solutions that don't involve turning off my computer?

Im running Windows XP Home Edition Service Pack 3

A:Forgot Admin Password, as well as BIOS boot up password

Hi and welcome to TSF

I am sorry but forum rules prohibits us from helping with forgotten passwords.

A link to our rules can be found at the top of every page.

This post is closed.

BG

1 more replies
Answer Match 69.3%

System disabled: 83725401Product: E3S20UA#ABAthanks for any help. I forgot the password and it gives me 3 try's and disables. I cand do anything else on startup











Solved!
View Solution.

A:Forgot my admin password/bios password

@Diesel_lineman? Enter  32683427 Regards, DP-K

4 more replies
Answer Match 68.04%

Hi folks,

I have a problem that i can't log in my computer because i don't remember the password. What kind of software can recovery my password ? i have try some bootable software but it seem can't find MS SAM database, i believe since last update from MS i have installed syskey in to it( i may wrong), but anyway, how do i log in to my computer without format the C drive ? thanks.
 

A:How do i recovery my admin password from XP ?

13 more replies
Answer Match 68.04%

I have XP Pro with all updates lately it has problems starting and often it has the Title bar at the bottom blacked out so I have to try to start by pressing reset but it's still a problem.

Tried;

(1) Using the SFC /scannow program to check files and locations - Hasn't improved situation.

(2) Have tried booting from Windows XP Pro CD - Press any key > F2 > Windows Set-up > Loads files > Start Windows.

(3) Repair Windows > Press R > Tries to Log-on and asks for Admin Password.

I don't recall ever using/designating an Admin Password...Is it likely to be a generic Password?? - I've tried 'Admin' and a couple of other Passwords that I regularly use but NO-GO.

So now I'm here asking...Begging if you like for some help:-(

Thanks in advance for any suggestions.
 

A:Win XP pro recovery admin password??

6 more replies
Answer Match 68.04%

System Disabled 76998828











Solved!
View Solution.

A:bios admin password

HI Try : 69690208

4 more replies
Answer Match 68.04%

I've recently puchased this machine 2nd-hand, however, the BIOS admin password didn't come with it. As a result, I'm unable to bring the BIOS up-to-date. Would you please advise how HP can assist me reset the BIOS admin password. Thank you. Kind regards. rayB

More replies
Answer Match 68.04%

I have a HP laptop that a friend set a bios admin/power on password that he no longer can remember. After 3 failed attempts I receive a system disabled 93381416 code. Can you please advise me as to how I can remove this password as my laptop is now worthless.

A:bios admin password

Hi, Enter   22089438 Regards, DP-K

3 more replies
Answer Match 68.04%

i forgot my bios password please help ..i have hp 6560b .i can boot the system normaly but the problem is the bios admin password . ater 3 time fault there is a keybord opened and after that it system locked restar the system ;\

More replies
Answer Match 68.04%

I need the bios password (THAT SHOULDN'T EVEN BE SET!) system disabled after 3 attempts, 51499148. Absolute disgrace that HP have resorted to these tactics to get people to register their product and bump page hit statistics!

A:bios admin password

@annoyedasfu? Enter   44591188

2 more replies
Answer Match 68.04%

i can't get into my BIOS mbecause i need a admin password and i don't have one i tried t3 times and i got the error code 80670314 please help i need to reset y pc cause the system got corrupted











Solved!
View Solution.

A:BIOS admin password help

When prompted for password try 35758930

3 more replies
Answer Match 68.04%

hey I am having trouble loging into the bios the error code is 54635512. please help me!!!

A:bios admin password

@tylerrivera334? Enter   41793534

1 more replies
Answer Match 68.04%

Hi! I forgot the administration password for bios on my Probook 6560b Can you help me?

More replies
Answer Match 68.04%

Hi,  I have a second hand HP EliteBook 8470p . i have installed Windows 10 64 bits Enterprise. I need the Bios Admin password to enable virtual machine to be configured such a s vmwares workstation . Please help me

A:Bios Admin password

@KonanNestor? For that model you will need to contact HP and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password.  http://welcome.hp.com/country/w1/en/contact_us.html When talking to the HP rep ask them to escalate your service request. REO

2 more replies
Answer Match 68.04%

I have forgotten Admin password in bios ,pls tell me how can I reset my bios admin password.My laptop is dell n5110 15r.

A:Admin password in bios

You need to call Dell support.  Have your ownership details handy along with a credit card -- the call won't be free of charge.

1 more replies
Answer Match 68.04%

I can't remember the bios administrator password I used on my laptop. After three wrong attempts this code was given: 84836352

A:bios admin. password

@jda4614? Enter   31794994

2 more replies
Answer Match 68.04%

Hi, forgot the BIOS password of my CQ58. Halt number is 64134360. Does someone know how to get into the BIOS? THX in advanceSponsje











Solved!
View Solution.

A:Admin BIOS password

Hi, Enter  71892966 Regards, DP-K

4 more replies
Answer Match 68.04%

I have a new puter in has an admin password as it was a corp. castoff.
I have entered the password and get OK.

And then I am in bios, Hp nx6110, f10 to get to enter password.

I have the win 7 installation disc in the dvd drive, and now for the big question. Now that I'm in how to I tell this beast to install?

This was an ebay buy, I hope I have not been burned...
Thanks for your assist.

A:Bios admin password I have, OS not.

If you are able to get past the BIOS password you should be able to boot from the DVD and begin the install process. In the BIOS you may need to set the boot order to boot from CD/DVD first.

6 more replies
Answer Match 68.04%

Hello,i need some help here i got code system disable 37748747whats that mean ?Thx be4

A:Bios Admin Password

@Red_One? Please enter:    28620389 Regards.

1 more replies
Answer Match 68.04%

I need the bios password for lockout error 59495365.I enter the password incorrect three times and it disables the system .All help is greatly appreciated thanks!

A:Need bios admin password

@Cohencohengone? Enter    46593961 Regards, DP-K

1 more replies
Answer Match 68.04%

HI,I can't remember current BIOS Admin password.Used BIOS Configuration Utility to change it- didn't help.How can I reset it? 

More replies
Answer Match 68.04%

Hello, can you please help me, i don't know what Bios Password i have. When i try to enter a password than i get this Code: 84773176. (System Disabled) Thanks in advance   











Solved!
View Solution.

A:Bios admin password

Hi, Enter  31651178 Regards, DP-K

4 more replies
Answer Match 68.04%

Hi,  I just bought this laptop but can not get to the BIOS to change the boot options due to an admin password. Can someone help please.The code I get after three invalid tries is System Disable  69403154  Thank you for your help.

More replies
Answer Match 67.62%

I got a new computer and made an admin account and a standard one.
I forgot the password to the admin account and need a way to reset or recover it.
The standard account is still accessible and it's limited features are still functional.
If you have any idea how to rectify this, please tell me how.
Thank you

A:Admin Password reset/recovery

Sorry but the Terms of Service at BC do not allow discussion of such topics.

3 more replies
Answer Match 67.62%

i need some assistance on how to get into the only admin account cause the password has been forgotten. I'm using windows vista home premium and its an Acer laptop

A:lost admin password recovery

Welcome Sinnerboy,

Sorry, but the news is not good. Here is a summary of what you can try.

If security were not good, the password would be meaningless. This is what I found.

Forgot Password - I Forgot My Windows Vista Password - Is There A Way To Find My Lost Password

We have this possible remedy from our tutorial selection. Try method 3
Reset User Account Password

12 more replies
Answer Match 67.62%

I did a clean install of XP pro and am the sole user with a user account password. Upon installing the recovery console it asks me for the administrator's password. When I enter my user account password it, it says it is the wrong password. I'm I to assume that the password that I'm entering on boot up is not the same as the 'administrator password for the recovery console? What am I doing wrong? How do I put a administrator password in so I can get into the recovery console?? Any help is appreciated. Please reply to:
[email protected]
 

A:XP's recovery console admin password help

it is not the same
even if u are the only user and u have admin rights, there is still an ccount called 'administrator' and this is hidden unless u restart into safe mode or manually type in user: 'administrator'
the password is therefore different then your username password (unless during the setup u entered the same password as u did for your username)

if u didnt put any 'administrator' password, try just pressing 'enter' when asked in recovery console but remember dont put your username there but 'administrator' in the 'user' field
 

2 more replies
Answer Match 67.62%

I am trying to do a windows xp repair installation and it is asking for an administrator password. The person who owns the computer and who set it up said she never had a password.

Is there a way around this?

I can not get to a dos prompt. If I try to boot off the hard drive I get NTLDR missing. If I boot from the OS cd I get sent to the installation & setup routine.

She has not backed up her data so I don't want to risk losing it. Suggestions?

A tech replaced her motherboard recently, she was able to use it for a few days before it started powering down again. Dell sent a replacement fan and I replaced it. She had been getting the NTLDR message before bringing the machine to me, so it's not something I caused. It also isn't likely the other repair tech didn't connect something because it worked for her for a few days after he was in there. (It's a laptop so I'm not eager to rip it apart if I don't have to).

Thanks for suggestions.
 

A:XP Recovery Admin Password Help Needed

8 more replies
Answer Match 67.62%

i have a friend using win2000 pro who can't access the default admin account, and there are no other admin accounts on the comp.
another friend she was told the following to delete the default password, i'm just checking this info is accurate, thanks.

"Did you keep your root partition/drive as a FAT32/16 area? If you did the solution is easy. Get any Windows9x boot disk and boot up to it, then CD to X:\WINNT\system32\config and delete SAM (no extension), SAM.SAV, and SAM.LOG. The SAM without an extension is actually an exe file. Those three files control the usernames and passwords. Delete them, reboot, and there will be NO admin password to worry about. Recreate users as before and this time keep the admin password"
 

A:default admin password recovery

Try just pressing Enter when prompted for the password. If no password has been set you will (or should) be set to go.
 

1 more replies
Answer Match 67.2%

My error code is 65104384 pls help

A:Cannot reset Admin BIOS password

@k6rl? Enter   70862900 Regards, DP-K

1 more replies
Answer Match 67.2%

Hello, I gave my notebook to a friend of mine a year ago and they set a bios password that they can't remember.I called HP Kenya and they told me to contact their agent whom advised me to buy a new motherboard.Is there something that can be done other than disposing what I have? I only need to enable the virtualisation in the bios and have to access it first.

A:Forgot BIOS Admin Password

Dear Customer, Welcome to HP Support Forum and we are glad to assist you. This is to inform you that all HP Business Notebooks such as Probooks  or Elitebooks have more stringent security than consumer models infact they don't produce 'halt codes', the password cannot be derived from the Serial Number and thecode is stored in non-volatile memory so removing the RTC cell will not reset the password in this case. Please have a look at this link. http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility Replace the BIOS chiphttp://www.ebay.com/itm/HP-Elitebook-8470p-8470w-8570p-8570w-8770w-Programmed-Bios-Chip-No-Password-... Please Contact HP Business Notebook support they should be able to send you a customized SMC.bin file which you can use at boot to reset the password. Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

1 more replies
Answer Match 67.2%

My boyfriend locked my computer so I couldn't access the bios menu because I wouldn't give him my Windows login password. Now he can't remember the password. The system disabledcode it gives is 70239445Model HP f272wm

A:Forgot Bios Admin Password

@Katsmeow Enter   65191481

1 more replies
Answer Match 67.2%

Hello, I need to reset password BIOS of my notebook Hp Elitebook 8470p.I 've read all about post ,I tried the step by step: Press [F10] Bios Setup | [Enter] x 3 |  On-screen keyboard displays | [Enter] | "System Locked press the power to restart the system" displays.  Can you help me to reset password ? Thanks and regards,

A:Reset admin BIOS password

@nguyenzung? Contact HP and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password.  http://welcome.hp.com/country/w1/en/contact_us.html When talking to the HP rep ask them to escalate your service request. REO

1 more replies
Answer Match 67.2%

I've been ,trying to get in to bios to reload to  factory specs, as a result of an error message saying the enviroment cant be found contantly.My  when performing automatic repair adminastor account was not found so unable to use all restore options stuck on automatic system repair.The error code when attemping to get to bios is 53866293 please help me 

More replies
Answer Match 67.2%

I am in sales. I have a new Dell d610 Latitude Laptop. I need to reset some of the stuff in the BIOS for wireless, etc and the IT guys at my company seem to have mislogged or fogotten the admin pw for BIOS. Anyway they have given me five alrady and non of them work. They say I will have to ship the unit in to Chicago and they will fix it. That will take a WEEK that I do not have. How can I reset the password? The settings in the BIOS I need to change are locked and the message says the setup is locked-enter the admin pw into SECURITY UNLOCK SETUP to enable changes. Any advice is welcomed!
 

A:How to reset the BIOS admin password

This subject was briefly mentioned HERE
 

6 more replies
Answer Match 67.2%

Hello, I'm needing a BIOS reset password.  The current halt code is 5C533F4A. I have tried https://bios-pw.org/ and the results do not work. Thank you.-Timothy













Solved!

View Solution.

A:BIOS Admin Password Reset

Hi, Your notebook is producing a hexadecimal halt code which is stored in ram as a 'one off' and will be re-calculated after a reboot.  This indicates you have one of the later AMI bios's and unfortunately none of the current code generators will work for this - surprisingly, you can still remove a power on password from the machine by removing the rtc cell ( leave the power board connected ) then hold down the power button for 60 seconds before re-inserting the rtc. The bad news is that the rtc is on the 'wrong' side of the system board so will require quite a lot of disassembly - see Page 115 of your Maintenance & Service Guide. Regards, DP-K

7 more replies
Answer Match 67.2%

Code is 81847902.Thanks.











Solved!
View Solution.

A:Another bios admin password request

Try >>  34725324

3 more replies
Answer Match 67.2%

Hi there, I'm wanting to set-up the BIOS on a group of machines with the same admin password by setting the BIOS on one machine, and then replicating that one on the other, but I can't seem to do it with these new models (I have to set the password separatety on each machine - takes ages!). In short, can the Security Settings be saved as well, or do they have to be set individually? Any advice on how I can do this? Many thanks.

More replies
Answer Match 67.2%

I keep getting "system disabled" with the code 90344953   please help

A:how to bypass bios admin password

Hi, Enter  25022365 Regards, DP-K

4 more replies
Answer Match 67.2%

Error message 532563391 on admin bios

A:Bios Admin Password Error

Hi, Check the halt code you've posted as it should contain 8 digits. Regards, DP-K

1 more replies
Answer Match 67.2%

BIOS password was set on a Vostro 3560 and it doesn't appear to be the same as what I remember setting it as
I understand that you could reset the password or change it to a master password...

The machine is a month old so its in warranty and its details are as follows:
SYS DISABLE 3298F8F22F47D21F
SERVICE TAG <Admin Note: removed per privacy policy~RK>

Can you let me know if you need any further details, and I can message you these?
Thanks

A:BIOS Admin Password unknown

I have the same problem .
someone else you can help me .
Thanks

2 more replies
Answer Match 67.2%

In the process of installing windows 7 Professional I discovered that I could not get into the BIOS or setup because it was password protected. I?ve tried a number of things including installing HP ProtectTools Security stuff and it seems that all that has done is to create more login passwords. I can now get into setup but as a user but not as an administrator and so I cannot change password. There is also another screen that shows up where I must enter a password and I?m not sure if that?s happening because of the HP Protect Tools that I installed and then removed or because of something in the BIOS. I?ve uninstalled HP Protect Tools and reinstall windows 7 and I still see both password screens. I attempted to update the BIOS using a file downloaded from the HP support website but cannot because I don?t know the admin password for access the BIOS.

A:BIOS/CMOS admin password

@brublag? Contact HP and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password.  http://welcome.hp.com/country/w1/en/contact_us.html When talking to the HP rep ask them to escalate your service request. Or download these files. https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?dl=0 Insert clean USB flash drive. Then run USB Image tool. Choose the flash drive then click on RESTORE. After restore remove flash drive. Insert flash drive into locked laptop and boot. ?If HDD is installed remove before booting.? At C:\OUTPUT   type CD..  ?Then hit enter? Type HPBR   ?Then hit enter? First thing is to save your settings. Select #3 re-program. Press ?S? to save system information. Type HPBR and hit enter. Select   ?FIRST RUN? Then select model. After reboot repeat same as above but this time SELECT ?SECOND RUN? Some instructions here. ?If you cannot boot from USB there are instructions to make a bootable HDD.? http://mazzifsoftware.blogspot.com/2014/01/hp-bios??-unlock-for-dos.html More here. http://forums.mydigitallife.info/threads/49497-HP-??Probook-Elitebook-BIOS-Password-Reset-Utility REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to... Read more

1 more replies
Answer Match 67.2%

my dell  inspiron  N1440 bios admin password forget, please help me to reset my password

A:to reset bios admin password

Hi,
Thank you for writing to us!
Are you talking about the BIOS password or the Operating system password.
If its BIOS password we would suggest you contact Delltechcenter on facebook or @Dellcarespro on twitter or you can call tech support .Also have the proof of purchase for the system .
If it is the Operating system password you can reinstall operating system .
Kindly private message the service tag and email address.
Thanks
Robin

1 more replies
Answer Match 67.2%

I forgot my password and now I have a system disabled message with a code 66620306. HELP!

A:Forgot admin/bios password

Hi: Enter this unlock code... 79788928

1 more replies
Answer Match 67.2%

I have an HP G71-340US and I can't remember the BIOS pwd. The disable code is: 62891546. Any help is much appreciated. Thanks











Solved!
View Solution.

A:Reset BIOS Admin Password

Hi: Enter this unlock passcode... 73799588

4 more replies
Answer Match 67.2%

I have forgotten my passwords. Disabled code is 88698938 Please help. Thank you

More replies
Answer Match 67.2%

I recently purchased a Pavilion Notebook 17-g192dx and set the BIOS Admin password incorrectly and cannot unlock it.  After the third attempt, I get this message: System Disabled[i 51052544] What should I do?  Any help would be greatly apprecipated!  I'm trying to get this laptop ready for my wife as a gift.

A:BIOS Admin Password Lost

Hi: Restart the PC and enter this unlock passcode... 44930580

1 more replies
Answer Match 66.78%

Howdy guys and gals! Looking to recieve your help once again. My problem is I want to do a Recovery Counsal for my girlfriends computer but it asks for an administrator password when there was never one in the first place. Is there a symbol i need to use to represent no password as a command? I tried to just press enter without putting anything in it and it keeps bringing up C:\>

Thanks a bunch!

A:Recovery Consul..asks for Admin Password but never had one

Hello,

After pressing <ENTER> you should get to the C:\ (type command here)

What command are you trying to run? What problems are you having?

8 more replies
Answer Match 66.78%

Hello, I am running WinXP(SP2)
I have accidentally locked my admind password using "net user" commands in command prompt. problem is I'm not sure what i changed it to.

I only have Guest Priveleges on my PC.
I deleted my other admin account, so my only admin account is locked.

I read somewhere about burning a boot disk (to reset the admin account password), but I'm looking for a different alternative. Does anyone got any help?

That might be my only option, but I hope not.
 

A:Admin Account Locked\Password Recovery

Welcome to TSG....
Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed.
Tech Support Guy Site Rules
http://www.techguy.org/rules.html
 

2 more replies
Answer Match 66.78%

I got the "disk boot failure' message upon trying to log onto windows xp. I tried using the original xp installation disk to run the recovery consule however it is asking for an admin password. Well there is no password...... I tried to simply hit 'enter' but it tells me that is the wrong password. I've tried 'default' as well. Well I know there is no password because during the original installation i never set one. I obviuosly can't log into windows and deactivate the security option in the registry so how else am i suppose to rebuild the bootmgr in order to get windows to load again?
 

A:Solved: Recovery Consule Admin Password

6 more replies
Answer Match 66.78%

I _need_ to format my WinXP machine, so I boot from the XP CD, and go to the recovery console-- but it asks for an administrator password. I'm the admin my on XP install, but I never set a password for anything, at all.

How can I reset it? Get around it? Anything?
 

A:Admin password when booting to recovery console.

7 more replies
Answer Match 66.78%

I was trying to get into the recovery console on the XP install CD and it asked me for the admin password. I don't recall setting a password while installing XP but if I did I know for certain what I used. But that one does not work.

I then booted normally and made sure that my administrator logon password was the same as the one I would have used while installing XP.

Then I tried again to get into the recovery console and again it does not recognize my password.

Is there a default password for XP home that is used if one does not set a password?

A:[SOLVED] admin password for recovery console

if you never did set up an administrative password, then just press enter. If that does not work, then unfortunately according to the rules we cannot help you bypass a password since it would seem there was one installed at one time.

6 more replies
Answer Match 66.78%

hi, i am the only user on my Laptop (administrator) i have run Recovery console, when it says 'type the administrator password' i type in the password i use every day. it says 'The password is not valid'?

does anyone know why this is?

ps. i have no system password (before windows login screen)
 

A:Recovery Console Admin Password 'Not Valid'?

Have you tried hitting enter without using a password ?
 

2 more replies
Answer Match 66.78%

Hi i need a help to recover my password for admin account could you please help me

A:I forgot my admin password for system recovery

Hi, Thank you for posting in the HP Support forum. Please, read this topic to find the answer of your question >> http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/I-forgot-my-password-can-HP-help...

1 more replies
Answer Match 66.78%

I recently ran a System Repair on my XP Console and it booted up to an lsass.exe error sO i went straight to the Reocvery Console;. but now it asks for an Adminstrator Password, which i never set. I can't get into regedit and i've tried all the obvious passwords. Any help? I had this situation earlier but when the lsass.exe error popped up, I could hit F10 for cmd to start regedit during the system repair. Now it freezes on a black screen at high res beFORE the system repair blue screen.
 

A:Windows Recovery Console Admin Password?

7 more replies
Answer Match 66.78%

When trying to boot into safe mode, the machine stops while trying to load agp440.sys

I want to disable the loading of this file in the recovery console, following these instructions:
http://support.microsoft.com/default...b;en-us;324764

Now I am asked for an administrator password. As far as I know, there is no admin password on this machine, but just hitting ENTER does not do the trick.

How do I bypass the password?

A:Login Recovery console without Admin password

Check your PM.

5 more replies
Answer Match 66.36%

pls i use a probook 6560b and i forgot my bios password. and now i want to to format my system but cant access my bios to boot from cd, pls how do i access it. thanks

More replies
Answer Match 66.36%

Hello all hardware wizards, sorry to take your precious time .

I just purchased HP NC8230 laptop from eBay. It's really great laptop. The laptop not require boot password and so it reaches to windows XP, but unfortunately I discovered that its bios is admin protected, therefore I can't access bios and make any modification. I know that these business laptops have extra bios protection and therefore it's not so easy task to reset their password.

Can someone, that have experience with this kind of laptops, help me? It would be very appreciated.
Ozmaia
 

A:HP NC8230 laptop Bios Admin Password

read the faqs AND post in the laptop forum. Your answer is already there.
 

1 more replies
Answer Match 66.36%

Hi all i want to set BIOS admin password in deployment from SCCM2012.I find some clue I don't set password from windows when it is clear (from factory).We have 5000PC M700/900 don't tell me we need manualy set password on all PC ... thnx for help

More replies
Answer Match 66.36%

We have two XPS12 9Q33 units that have the BIOS Admin password set, but no one left in the department knows the password. We've tried all the normal variants to no avail.
Yesterday I spoke with out of warranty support, and the gentleman was unable to help as from his documentation this computer has a Phoenix BIOS, while in reality all the units we have are AMI BIOS. We have 12 of these units, but only these two have the admin password set.
Does anyone know of a way to reset the BIOS ADMIN password? Not the system password, we have that, it's specifically the ADMIN password. Support yesterday was very frustrating in trying to get them to simply listen to what our problem was so I gave up on that and came here.

More replies
Answer Match 66.36%

Hi, everyone
I have an serious problem, ive buy an hp 6730B on ebay but when i want to upgrade the bios, my computer wants an administrator password for the flash.
The seller told me he have maybe do an error of typing, beacause his password don't work.
this computer is an compaq 6730B
S/n : CNU8466GNS
P/n : GB987ET#ABF
Service tag : C6730bUP8400W5X16GIBNNF20Qa

Thank you
 

A:HP 6730B bios admin password problem

hi,
I asked for the same problem in this forum but my threat was deleted with the suggestion to read the Forum FAQs.
I read them but I didn't find why they did it. So I want repeat the question adding it to the yours one:

HP CompaQ nx9005
hash code [ 15656]
I need the system password

I wrote and I just wrote again at the hp forum about it whitout any help, and the hp chat doesn't start because of a bag (I'm not the only one having this problem).

I read all messages of the reference topic about the same problem (as suggested) but I didn't find my needs.
I think I will have to ask about it a lot of time. Hope to find someone who can help me.
thanks
 

6 more replies
Answer Match 66.36%

Hi!I'm working on my cousin's HP Mini 110-3500 laptop and I need to get into the Bios. She doesn't have any of the paperwork that came with the computer.  How should I approach trying to figure out what the BIos Admin Password is?  Is this the best place for that or do I need to email HP directly?Any help will be appreciated.  Thank you











Solved!
View Solution.

A:HP Mini 110-3500 Bios Admin Password

Hi,          You can use the below link to generate the BIOS password reset key. Enter the System Halt code or the Serial Number of the unit to generate one.   You can: 1. Use the unlock code you generated to enter the BIOS2. Disable all passwords that are enabled in the BIOS's security menu.3. If asked for current password - type the unlock code4. For new password, just press ENTER key5. Repeat the same for verify password column.

4 more replies
Answer Match 66.36%

Hi all
 
i want to set BIOS admin password in deployment from SCCM2012.
I find some clue I don't set password from windows when it is clear (from factory).
We have 5000PC M700/900 don't tell me we need manualy set password on all PC ...
 
thnx for help
 
 
Mod:  edited title to add system type

More replies
Answer Match 66.36%

have error code 60337771

A:lost admin password in bios screen

 Hi, Enter: 75095377

1 more replies
Answer Match 65.94%
A:hp 2000 notebook admin or power on password recovery [ New ]

@cris-sdive Enter   75784238 Regards, DP-K

1 more replies
Answer Match 65.94%

my halt code is 92524127.  i was wondering if anyone could help with this 











Solved!
View Solution.

A:hp 2000 notebook admin or power on password recovery

@dparks06? Enter   23482109

2 more replies
Answer Match 65.94%

If you know much about recovery disc, I think you will know recovery disc is the best choice for Windows 7 admin password reset besides another administrator. The recovery disc includes password reset disk and system recovery disc. Password reset disk is easy to create before Windows 7 locked. While if you want to create password reset disk after you couldn?t log on to Windows 7, you have to ask for help from third-party software. For example, Windows Password Genius is conceivable option. System recovery disc can be instead of installation disc, if you have back up your Windows 7 Home Premium. But if you have not done that, it doesn?t matter. System recovery disc also could be created after you are unable to boot your Windows 7, as long as you find a computer with same Windows operational system. You have to create system recovery disc on it. For example, 64-bit System Repair Disc can only be created on a 64-bit Windows 7. You can check the properties about computer through Control Panel ? System and Security ? System, or right click the Computer and choose Properties. Now let?s see how recovery disc reset Windows 7 Home Premium admin password.1. Password reset disk reset Windows 7 admin password2. System recovery disc reset Windows 7 admin password 1. Password Reset Disk Reset Windows 7 Admin Password There are two cases you should consider, because password reset disk comes from two ways and is created in two periods. So when you use pass... Read more

A:How to Recover Windows 7 Admin Password with Recovery Disc

Thanks for this article, it is informative and I also find out the other ways to recover Windows 7 admin password with recovery disc instantly. It is to make use of the sade mofe, admin account,  password prompt and so on.  In that topic we can know the SmartKey Windows Password Recovery is also a good tool for us. It is really another smart Windows 7 password key and it also supports Windows 8.1, 8,XP and Vista. You can't miss it.

3 more replies
Answer Match 65.94%

After enter 3 times I received the following code: 62859715

A:hp 2000 notebook admin or power on password recovery

@Zane1? Enter    73731331 Regards, DP-K

1 more replies
Answer Match 65.52%

Says " an operating system wasn't found. Try disconnecting any drives that don't contain an operating system. Press Ctrl + alt + delete to restart" black screen. "Admin" password does nothing. 

More replies
Answer Match 65.52%

Bought a second hand Hp Elitebook 2560p  just two weeks ago only to find out that there is a bois password. Any one with the idea od how to clear the bios admin password?











Solved!
View Solution.

A:How to clear BIOS admin password HP Elite 2560p?

Contact HP.   http://welcome.hp.com/country/w1/en/contact_us.htm?l Or download these files.  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-k?fX4AVH8oTCbsOM4X9a?dl=0 Insert clean USB flash drive. Then run USB Image tool. Choose the flash drive then click on RESTORE. After restore remove flash drive. Insert  flash drive into locked laptop and boot.?If HDD is installed remove before booting.? At C:\OUTPUT   type CD..   ?Then hit enter? Then type HPBR    ?Then hit enter? Select   ?FIRST RUN? Then select model. After reboot repeat same above but this  time  SELECT ?SECOND RUN? Some instructions here. http://mazzifsoftware.blogspot.com/2014/01/hp-bios???-unlock-for-dos.html More here. http://forums.mydigitallife.info/threads/49497-HP-???Probook-Elitebook-BIOS-Password-Reset-Utility REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

3 more replies
Answer Match 65.52%

If your trying to change a bios setting or Reformat any of the newer Dell Laptop's you may run into this issue! There is an Administrator password you will be prompted for. I believe this is created at the factory and unplugging the bios battery no longer does the trick! I tried many different passwords combos and found that:

<dell> all lowercase and minus the brackets works for a few of the newer Dell Laptops

Good Luck,

Frajile-

A:Dell Bios Admin Password/Inspiron 1720

That makes no sense at all. If it were true then Dell would have to provide the password as part of the information it provides to customers when they buy the laptop. Anything else would subject them to being sued.

1 more replies
Answer Match 65.52%

Hi,    Two of my laptops have issue in the BIOS mode.There is a password to enter the BIOS mode,I tried a few times . I have got this message System Disabled 51762773For other one System Disabled 74290261   Regards











Solved!
View Solution.

A:BIOS Admin Password Lock, System Disabled

@Tan54321? Second one. Enter   61198867

5 more replies
Answer Match 65.52%

Hi,
Could someone help me? I have a Dell Latitude D510 laptop and I put an BIOS admin passwoed an year ago. Now I need to remeve it but I don't remember. I tried the latitude.exe program but did not worked. Service tag nr. is 6TXB42J-595B . Thanks a lot in advance.
 

A:Dell laptop reset bios admin password

U will have to do, a chip reset.
Coz i also keep trying those ideas with the latitude application but it failed, but when i did the chip reset, thing worked out exactly how i wanted them.
All the best

Cheers
Robin
 

16 more replies
Answer Match 65.52%

Forgot the bios password and cant get in to my hp Stream 11, can you please help to reset it so i can get in to the bios or operating system again.

A:hp stream admin or power on password bios lockout

@HpStreamPOS? When asked for the password just hit enter 3 times. Post any code. REO

3 more replies
Answer Match 65.52%

so, i have a 6530B that i got from a relative, and i must say, it is extremly difficult to work with... I want to do a factory restore, and to do so i need to get through the bios admin password. I cant even boot from a USB to do a fresh install... Would it be easier to have HP support help me with the bios password, or should i just put in a new HD and do a fresh install, using another pc as a surrogate for the install(cant get past bios on tis one)? from what ive read spending the day trying to find a way around the password, that there really is no workaround... Kind of obnoxious... but its a business machine so makes sense...

More replies
Answer Match 65.52%

HP PAVILION AB-063CL Locked with BIOS ADMINISTRATOR PASSWORD. Message after 3 attempts states: SYSTEM DISABLEDA [6087979E] How can I disable this? Thank you!











Solved!
View Solution.

A:HP Pavilion ab-063cl BIOS Admin Password Lockout

Hi, Your notebook is producing a hexadecimal halt code which is stored in ram as a 'one off' and will be re-calculated after a reboot.  This indicates you have one of the later AMI bios's and unfortunately none of the current code generators will work for this - surprisingly, you can still remove a power on password from the machine by removing the rtc cell ( leave the power board connected ) then hold down the power button for 60 seconds before re-inserting the rtc. The bad news is that the rtc can be on the 'wrong' side of the system board so will require quite a lot of disassembly. Regards, DP-K

4 more replies
Answer Match 65.52%

I purchased this pre-owned and would like to update the bios. It wont let me do so unless i give it the admin password. How to take the password off ?










Solved!
View Solution.

A:How to reset bios admin password HP Elitebook 8440p

SOLUTION: This is what I did and worked like a dream. Contacted HP, told them the problem. They "escalated the case," took my info. The next day I was emailed a file called SMC.bin. It is formatted specifically for my machine, has to match the UUID. Copied file to FAT 32 formatted jump drive, booted it as per the email instructions, reset bios password.I did this via chat on HP's website.Screwing with the bios battery will not work on Elitebook...

10 more replies
Answer Match 65.52%

Hi, Im trying to update the BIOS on my HP Probook 6555b, but get prompted for an admin password, which i do not know. I have removed the battery and the RTC battery, however when i start backup i get the below error and the default admin password gets restored.  Is there a way to reset the Admin BIOS password please? The CMOS checksum is invalid. The CMOS will be reset to the default configuration and will be rebooted. Please check your BIOS Setup options to see if they changed. CMOS Reset (502) ENTER - Reboot the system

A:HP Probook 6555b BIOS Admin Password Issue

@johnreid? Contact HP. http://welcome.hp.com/country/w1/en/contact_us.html Or download these files. https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?dl=0 Insert clean USB flash drive. Then run USB Image tool. Choose the flash drive then click on RESTORE. After restore remove flash drive. Insert flash drive into locked laptop and boot.?If HDD is installed remove before booting.? At C:\OUTPUT   type CD..   ?Then hit enter? Type HPBR   ?Then hit enter? First thing is to save your settings. Select #3 re-program. Press ?S? to save system information. Type HPBR and hit enter. Since your model is not listed select ?SHOTGUN.? After reboot repeat ?SHOTGUN? a second time. Let me know the result so I can update my list. Some instructions here. ?If you cannot boot from USB there are instructions to make a bootable HDD.? http://mazzifsoftware.blogspot.com/2014/01/hp-bios??-unlock-for-dos.html More help here.http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility?s=ad... REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

5 more replies
Answer Match 65.52%

For some reason, my BIOS is locked with an administrator password.  I end up with halt code 67174665.  I would appreciate any help on an unlock code for this.

A:Need BIOS admin password, met with halt code 67174665

Cyber. Enter   78852261 

1 more replies
Answer Match 65.52%

I have an older HP900 laptop which is a nice size to take in our motor home. However, it overheats after running for about 15 minutes. I understand there is a bios update that turns the cooling fan on sooner but I can't get into the bios because of password protection. Any ideas on how to crack the password or any pins to short to reset it?

The laptop will run fine if I rais it off the table and have a fan blowing on it from behind. Cooling fan in laptop runs, but it only comes on shortly before a shutdown if I am not running an additional fan blowing under it.

thanks for any ideas or help

Woodie
 

More replies
Answer Match 65.52%

I got a ProBook 6570b but the BIOS admin password is lost.  I need assistance to reset the BIOS Admin password.  The details extracted using the BIOS Configuration Utility is shown below: BIOSConfig 1.0;; Originally created by BIOS Configuration Utility; Version: 4.0.15.1; Date="2016/11/01" Time="16:42:31" UTC="11";; Found 226 settings;ManufacturerHewlett-PackardProduct NameHP ProBook 6570bSystem Board ID17ABUniversally Unique Identifier (UUID)8EE994AE64AAE111800788C872014066Processor TypeIntel(R) Core(TM) i7-3520M CPUSKU NumberB7C07PA#ABGWarranty Start Date06/01/2012Processor Speed2.90GHzSunday*DisableEnableMonday*DisableEnableTuesday*DisableEnableWednesday*DisableEnableThursday*DisableEnableFriday*DisableEnableSaturday*DisableEnableBIOS Power-On Time (hh:mm)00:00PCID VersionA1.00System Configuration IDA1009D11Define Custom URLTotal Memory Size16384 MBMemory Slot 1 InformationBottom-Slot 2(under) 029E 8192 MB @ 1333 MHzMemory Slot 2 InformationBottom-Slot 1(top) 029E 8192 MB @ 1333 MHzCustom Boot PathBIOS Date03/28/2013System BIOS Version68ICE Ver. F.41Serial Number5CB22201TWVideo BIOS RevisionATI 04/05/12Keyboard Controller Version42.34Ownership TagAsset Tracking NumberPrimary Battery Serial Number00871 5/24/2012Serial portDisable*EnableSecondary Battery Serial NumberNo Battery PresentParallel portDisable*EnableFlash media readerDisable*EnableUSB PortDisable*Enable1394 PortDisable*EnableExpress Card SlotDisable*EnableWWAN FCC IDNo Device PresentWLAN FCC IDPD9... Read more

A:ProBook 6570b BIOS admin password reset

Hi, Unfortunately I'm not aware of any 3rd party utilities that work with this particular Model, however if you Contact HP Business support they should be able to send you a customised SMC.bin file which you can use at boot to reset the password. Regards, DP-K

2 more replies
Answer Match 65.52%

HiIs there a way to clear/reset bios admin password in HP Elite 2530p?I tried to remove cmos battery, and then unplug the laptop battery, but the admin password is still there Thanks

A:How to clear BIOS admin password HP Elite 2530p?

short the two metal that is holding the cmos battery for 20 seconds    say thanks by clicking the star click accept as solution if my reply solved your problem.

9 more replies
Answer Match 65.52%

I recently found myself locked out of my system's BIOS having never set an admin password myself. Since then I've had many problems including forced reboots/physical memory dumps while trying to perform scans requested in the malware detection directions for this site. I don't know specifically what is wrong, but have had software detect anonymous users logging on to my computer remotely without appearing as users in the control panel.I've reinstalled the operating system counteless times and always find the same problems within hours if not minutes of installation completion. Finally, and I'm not sure if it's relevant, but Windows only recognizes some 148 odd Gb storage space on my 160 Gb hard drive. Also, the computer will boot normally, but not in safe mode or any other diagnostic condition; when trying this a screen comes up listing all installed drivers and computer freezes.Any help would be much appreciated.Thanks,DDS (Ver_10-03-17.01) - NTFSx86 Run by Ted Cassel at 15:50:36.10 on Thu 03/25/2010Internet Explorer: 7.0.5730.13Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.3574.3139 [GMT -7:00]============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\System32\svchost.exe -k netsvcssvchost.exesvchost.exeC:\WINDOWS\system32\spoolsv.exesvchost.exeC:\WINDOWS\system32\wscntfy.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS&#... Read more

A:BIOS Admin Password set by anonymous person / unknown to me

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you let... Read more

8 more replies
Answer Match 65.52%

I took out my HP laptop that I hadn't used in a while. Turns out I didn't keep track of the BIOS password that I set. Now getting a System Disabled message with code 99540439. Is there any way to get this reset? Thanks!











Solved!
View Solution.

A:Forgot BIOS admin password; System Disable

@captkitteh? Enter   26428419

2 more replies
Answer Match 65.52%

Help!  I have a vintage IBM R51 laptop running XPSP3.  Yesterday I updated Mozilla Firefox to the latest version and things went to hell.  The update took a couple of hours, which was my first sign thing were going sideways. Normal boot process takes forever, with continuous disk accesses.  I can barely get the systme manager window open.I can safe boot, but cannot run AVG to see if there is a virus.  AVG reports an error and closes.  This is the paid for AVG, not the free version. If I try to start the XP Recovery Console, it asks if I want to start Windows on drve C:, but then prompts for an Administrator password.I NEVER set up an administrator password. I am not even sure this problem is a virus, but I am sure I need help (PLEASE!) I was able to run FRST (from BartPE) and here are the results: Scan result of Farbar Recovery Scan Tool (FRST) (x86) Version: 30-06-2013 03Ran by SYSTEM on 30-06-2013 18:54:31Running from D:\BleepingComuterMicrosoft Windows XP (X86) OS Language:Internet Explorer Version 8Boot Mode: RecoveryThe current controlset is ControlSet001ATTENTION!:=====> FRST is updated to run from normal or Safe mode to produce a full FRST.txt log and Addition.txt log.==================== Registry (Whitelisted) ==================HKLM\...\Run: [SynTPEnh] %ProgramFiles%\Synaptics\SynTP\SynTPEnh.exe [1323008 2008-07-04] (Synaptics, Inc.)HKLM\...\Run: [BluetoothAuthenticationAgent] rundll32.exe bthprops.cpl,,Bluetoo... Read more

A:excessive disk accesses, now recovery console wants admin password

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/499735 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

2 more replies
Answer Match 65.52%

So I boot up Windows (XP Pro SP2) and after the loading screen, I get a black screen. I've googled the problem and can't find a way to fix it without using the recovery console. The problem is, as far as I remember, my Admin password is blank. However, when I press enter at the prompt without typing anything, it says I have the wrong password, so it's probably something else that I don't remember.

What I need is either another way to fix the black screen without recovery console, or a way to find or change the admin password.

I have a separate hard drive I can use as an alternate Windows install, so I can get into the HD of my original install, but can't access the original Windows.

Any ideas? Thanks in advance.

A:Blank screen on boot, or recovery console without Admin password

Sorry but TSF rules will not let us help bypass security measures of any kind.

2 more replies
Answer Match 65.1%

Hi There,
I have locked myself out of the BIOS and wondering how I would get the password reset. Thank you,
Fuffs

More replies
Answer Match 65.1%

i forgot admin or bios password for compaq CQ58 notebookmy code are 94289323 please help











Solved!
View Solution.

A:forgot admin or bios password for compaq CQ58 notebook

@leonaedo? Enter   21181905

3 more replies