Tech Problem Aggregator

G580 touchpad driver is not installing

Q: G580 touchpad driver is not installing

Hi, My touchpad scrolling was not working . So i installed given driver for touchpad on the lenovo site which was Synaptics,Elan . But when i am installing this there is an error poping up -"driver is not compatible". So, please provide solution if you have one.

More replies
Answer Match 76.02%

I noticed that new drivers were released for G580. The drivers (Lenovo Enegry Management Driver) canot install because when the installer starts up, it immediatelly closes. Do I have an issue somewhere? Windows 10 (1511, Build 10568.17)Lenovo G580 (20157)

A:Lenovo G580 Windows 10 ACPI Driver not installing?

hi acemod13,
 
I looked at the Lenovo Energy Management driver for Windows 10 and upon observing the installer behavior, it extract the ACPI driver files (58KB) to C:\ProgramData\Lenovo\ACPIDriver (this may explain why the installer closes right after extracting).
 
If you're seing an Unknown Device in the Device Manager with an ACPI hardware ID (see image below) then try to update the driver manually and point it to the C:\ProgramData\Lenovo\ACPIDriver folder
 - Sample image
 
If you're unable to see the driver files, I've uploaded them here.
 
 
Let me know how it goes.
 
Regards

2 more replies
Answer Match 67.62%

when my leptop battery insert in my leptop then my touchpad not working... and again without battery on my leptop then my touchpad working.. so help plz this problm... my touchpad not working with leptop battery.. thanking you

A:G580 - Touchpad not working

Hi nikunjm022 , 
 
Welcome to the Community Forums. 
 
When did it started happening ? If this would be a power management settings then a system restore to go back to a previous working date may help.
 
Try to reset BIOS settings by turning on the pc using the Novo key (item5 page 2) and choose BIOS settings , F9 to reset F10 to save and exit .
 
You can also try updating the touchpad driver from the support site. 
 
We are not eliminating probable affectation of a grounded battery , but would it also happen with an inserted battery while plugged with the adapter?
 
Update us how things go. 
 
Regards
 

1 more replies
Answer Match 65.1%

So I was updating my drivers, and had wanted to update my Synaptics driver. I had removed the older version of Synaptics driver (because I was required to) and wanted to restart. My computer restarts, and I try to install the latest version of the Synaptics driver, it doesn't work. It says "install failed." I have tried multiple times.

Any help would be appreciated!

A:Synaptics (touchpad) driver not installing

Bump.

5 more replies
Answer Match 58.8%

Hello, The Problem:Recently I installed Ubuntu 14.04.1 LTS  to my HDD in UEFI mode. Soon I found out that I could not access the BIOS using F2, but F12 allowed selection of boot device. Reinstalling Windows, I found out that the boot menu still had the Ubuntu entry and I still could not access the BIOS. I searched on the web for a solution and before I could manage to find a proper one, I managed to delete both the ubuntu and windows boot manager boot entries, still locked out of bios. This time I could not boot into any OS, could not access bios using f2 nor access boot menu using f12.  The Solution:There was one last hope, during boot I noticed that PXE (Boot via ethernet option was still showing).Note: This solution requires you to update the BIOS. This is a very risky procedure, so proceed with caution. This will also probably void your warranty. If you can access boot menu (F12) and want to regain access to the BIOS (F2), boot into Windows 7. Install a bios update for your laptop (specifically for your laptop) available at The Lenovo Support Site. The oldest BIOS (probably for Windows 7) is preffered. If you donot have access to windows 7, perform step 2 and boot into the created ISO by creating a bootable CD or pendrive. Then goto step 11.If you can't access F12 and F2, cannot boot into OS, but can boot via Ethernet (there should be a message about trying Atheros Ethernet PXE Boot during startup), start from step 1. Perform the following steps on a s... Read more

A:Lenovo G580 cannot access BIOS after installing Ub...

Update: Even in the newest BIOS Update 62cn97ww (for Lenovo G580), Ubuntu causes the same problem. I came across a solution on the internet, that works without having to update the BIOS if Ubuntu can be accessed. To fix it, boot into Ubuntu (should be installed on the system), start Terminal and type in the following commands:sudo grub-install
sudo efibootmgr -b 0 -BReboot and F2 should work. BIOS should be accessible through F12>Tab>Setup also. Ubuntu will boot no more but can probably be fixed.

8 more replies
Answer Match 57.96%

In my attempt to reinstall my Lenovo G580 audio drivers I deleted one and I can't find it. I think it might be a Dolby Advanced Audio driver because I'm pretty sure thats what my computer has. When I looked at device manager there were orignally 2 drivers under "Sound, Video, and Game Controllers". After I deleted one, the driver that was left is Intel(R) Display Audio. I hope that helps identify the missing driver. Also I would like a download link to the Intel(R) Display Audio driver because i will need to reinstall that one as well.
 
Im almost definently monitering this post constantly so if you reply expect a response very soon
Thanks for the help
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

A:G580 - Missing Audio Driver

Hi LA314 , 
 
Welcome to the Community Forums.
 
You may visit the support website for your particular model , choose your appropriate OS and under the Audio category you can try to install offered drivers for your particular system.
 
Check all other sub category as chipset update is helpful. 
 
Update us how it goes.
 
Regards

1 more replies
Answer Match 56.7%

Hi,   I had upgraded my Lenovo G580 to windows 10. Everything working fine except dolby audio and touchpad scroll. Volume is too low when it is 100 and also touch pad scroll is not working. In previous version i have problem in wifi now it is working fine in windows 10. Kindly update the audio and touchpad drivers for windows 10 or give any suggestion to fix this problems.

A:Lenovo G580 windows 10 dolby driver and touch pad ...

Dear kathir26,
 
Thank You For Contacting Lenovo.
 
Kindly be informed that the Windows 10 Drivers For your machine model G580 arent released yet so you can follow up on our Website to find the driver needed once they are available.
 
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g580-no...
 
 



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 56.28%

Haven't updated your laptop's trackpad driver lately? Then you may well want to consider doing so, at least if your laptop is equipped with a Synaptics trackpad. As a user on the Hardware Zone forums discovered, the latest Synaptics driver seems to enable multitouch gestures on older laptops that didn't previously support them, including two-finger scrolling, and three-finger click. What's more, while the drivers themselves come from HP, they should work just fine on other laptops with a Synaptics trackpad. Hit up the link below to try it out for yourself.
Source: Synaptics driver enables multitouch gestures on older trackpads -- Engadget

p.s. working on my P7805u perfectly.

Download directly from HP: ftp://ftp.hp.com/pub/softpaq/sp47501-48000/sp47815.exe

More replies
Answer Match 55.86%

My Lenovo g580 webcam is not opening as in device manager its showing yellow Exclamation on driver which says that: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)Please help as i had many things but its not helping.Do suggest.

More replies
Answer Match 47.04%

Heya

Was looking for solution for my problem everywhere but couldn't find a solution for my problem. So i hope someone here could help me.

So let me describe what is the problem.
Touchpad on my laptop is acting up. It is working, it is turned on and enabled and its drivers have been updated.
Problem is whenever I unplug my laptop from charging as in switching it to battery mode touchpad stops working. When laptop is plugged in and charging touchpad is working perfectly.

If any questions about the problem please do ask I'll let you know as much as i can

~K

A:Problems with touchpad since installing win10 ~

If you can find it in Device Manager check to see that it is not allowed to disable itself to save power. It's possible that you could find this setting in the current power plan also. Not sure if this will help but this might be a good starting point.

0 more replies
Answer Match 47.04%

I have a Dell Vostro 1400 laptop. After upgrading to Windows 7, I no longer have touchpad control settings. (I usually disable my touchpad when using a mouse). I no longer have this option.
 

A:Touchpad not working after installing Windows 7

11 more replies
Answer Match 46.2%

synaptics driver.

Before I installed the synaptics driver software, right touchpad button was working. Now after I installed the synaptics driver, right touchpad button does not work anymore.

More replies
Answer Match 46.2%

My touchpad stopped working after I had installed a usb mouse (and an IR remote).

I searched numerous forums and tried everything out there with no success, including the following:
tried the function key to turn touchpad on/off (the most obvious source of the problem)
tried reinstalling driver for touchpad from the manufacturer web site
removed the usb mouse and rebooted
went to Control Panel/Hardware and Sound/Mouse to enable touchpad - touchpad was no longer even listed
There were no problems showing up in the Device Manager

This all became a bit frustrating because I would have to reconnect the usb mouse to do any maneuvering around the system (since the touchpad was not working) to try something else.

I then tried the following: removed the usb mouse, turned off computer (used ctrl/alt/del, then tabbed to the shut down button), turned computer back on. The touchpad still did not work. Without doing anything else, and with the usb mouse still not connected, I then turned the computer back off, then on a second time - and the touchpad became functional. I plugged the usb mouse back in and both worked again at the same time. In the Control Panel/Hardware and Sound/Mouse - both the touchpad and mouse were now recognized.

Hope this helps out others with the same problem (this seems to be a fairly common problem based on the number of postings around the web)

A:Touchpad not working after installing a usb mouse - one solution

With MSI, try turning it on with Fn + F3

3 more replies
Answer Match 46.2%

Hello, I have an Advent Monza S200 laptop. I've recently upgraded to Windows 10. Before I upgraded my touch pad was working fine, but after the upgrade my touch pad stopped working.
Once my laptop is turned on, the cursor is not visable on the screen, the touch pad is unresponsive too. If I plug in an external mouse, the cursor re-appears and I can control my computer that way, although as soon as I un-connect my external mouse the cursor stays on the screen but I can't control it with the touch pad.
I can un-install the touch pad drivers, then re-install them from the Advent webpage and the touch pad will work perfectly until I turn my laptop off, then when I switch my laptop back on, I'm back to square one again and can't do anything unless I plug in my external mouse.
I've tried asking on the Advent forums but they don't seem to have had any traffic since early 2013.
Any help would be great.
Cheers
Mark

A:Laptop touchpad not working since installing Windows 10

Hello ObiDad. Welcome to the Forum

You don't say how old this laptop is or what operating system it came with, but that would be helpful to know.

The first thing I would try is to uninstall (remove) the touchpad from Device Manager. If the option is available remove the driver also. Then restart.
The important thing is that you try and remove all instances of any old drivers that may interfere with the generic driver installation.
Windows comes with a generic touchpad driver and that will be installed automatically and it may work right off, particularly if there is a driver conflict going on here.

If it works, then you could try and install the Advent driver. Only this time run the installer program (app) in Compatibility Mode. Use the compatibility mode for the operating system that the Advent driver is made for.
Compatibility Mode Settings for Apps - Change in Windows 10 - Windows 10 Forums

See if either or both of those things help.

more replies
Answer Match 46.2%

my  Synaptics touch pad some time becomes more sensitive  automatically.  I don't know how.In setting i have make it in medium sensitive but it automatically after some time becomes more sensitive due to which i can't select anything properly.     I recently updated my laptop to windows 10 from 8.1 by hp service centre 2 days ago,from that such problem continues.   MY LAPTOP PRODUCT=HP NOTEBOOK 15AC122TU. 6 MONTH OLD.PLEASE HELP ME ???.

More replies
Answer Match 46.2%

On my inspiron 1545 laptop is seems finger tracking on the touchpad stops responding sometimes. I'm using Windows 7 default drivers. Do you think it is a driver problem? Can I use a Vista driver?

Also on a side note is there a way I can disable the tap for mouse click on the touchpad?

A:Touchpad driver

Install the touchpad manufacture's driver. It should provide control over its functionalities.

2 more replies
Answer Match 46.2%

I just received a new P50 and noticed that the left button below the touchpad was registering a double-click whenever I pressed it. I rolled back the driver from the most recent (July 2016) to the previous one from 2015 and the issue seems to be resolved. Anyone else experience this? BTW, I'm using Windows 10. 

More replies
Answer Match 46.2%

Sir,
Am Using Hp 630 Notebook Pc. I Can't Install Touchpad Driver.

More replies
Answer Match 46.2%

Hey everyone,
 
I have several ThinkPad T60 Type 6371's at work as test machines. They have all been upgraded to Windows 7 and they all have this ridiculous touchpad driver problem.
 
The problem is simply that the driver fails to load every other restart or so. This happens both in regular and safe mode. I have uninstalled the driver from Device Manager many, many, many times to let Win7 reload it but the same problem keeps happening.
 
Any thoughts?

A:Touchpad Driver

Hi
Are You talking about the Lenovo Touchpad driver?
If So try uninstalling it and see how well the Windows driver works. As I remember the one that comes in Windows should work OK.
 
Good Luck
Roger

4 more replies
Answer Match 45.78%

I have an Inspiron 6000. The old hard drive crashed and I got a new one with Vista Business edition. Now I can't use the touchpad to scroll, and dragging things has become harder as well. I couldn't find any drivers for Vista. Any ideas? thx
 

A:Solved: Touchpad problems after installing new hard drive

Load the Vista drivers for the Synaptics TouchPad would be my first step.
 

3 more replies
Answer Match 45.78%

Dell Studio 1535

I've successfully installed Windows 7 on a clients laptop, the thing is the touchpad won't scroll anymore after having installed W7.

I have all the drivers and everything, even the driver for the touchpad.

I just can't figure out to set/configure the touchpad to scroll again.

Note: The touchpad itself does work, but it just won't scroll.

Any help is appreciated.

A:Dell Studio 1535 touchpad won't scroll after installing W7

Do you have x86 or x64 Windows 7? You say you have the drivers, confirm that it is these (pick for your correct version)

32 Bit

64 Bit

A Guy

1 more replies
Answer Match 45.78%

Hello all,
I'm new to windows 7. I installed it on my Dell Inspiron e1505 32-bit. I have a question about my touchpad. I can't seem to scroll using it as I use to like I have before. I tried downloading the driver from Dell but I need to install microsoft framework 3.5 sp1. in order to get drivers from that website. Can anyone tell me how I can get the touchpad driver... Thanks!

A:Need Touchpad driver...can't download it.

If you will provide me with the link,or service tag # and I will try and download it for you then upload it to a file sharing site. Have you been able to dowload any other files? If not something is wrong with your copy of 7. Fabe http://support.dell.com/support/topi...7&l=en&s=gen#3

5 more replies
Answer Match 45.78%

I have a lenovo 4446 (or G530)



The operating system is win7 64 bit.

I need the touchpad driver. Thanks

A:64 bit touchpad driver needed

Welcome
Since you had to guess on the exact model, this is the best that I can do
Lenovo Support - Drivers and software - Lenovo G530 (MT 4446 only), N500

3 more replies
Answer Match 45.78%

Hi,
My touch-pad does not work anymore, so i have tried several drivers from synaptics and so on. It gave me some results, but after some time, the touch-pad just went on and off completely random. After this, the touch-pad died, and has not worked since. I have tried drivers, drivers and more drivers. Nothing seems to be working. I'm able to go into "Dell touchpad" then when i try to push the "touchpad settings button" nothing happens - does not react at all. Hopefully someone can help me

Computer is Dell Xps 16
OS vista 32bit

A:Dell touchpad driver

The only thing I'd tell you is look in the BIOS for touchpad options. Run Dell diagnostics by pressing F12 and booting with diagnostic partition. It may be able to test the touchpad so you can rule out windows problem or PC problem.

If not, it's dead and they'll need to replace your palmrest. If you have still under warranty you may have next day onsite or return to depot warranty. The former is better.

2 more replies
Answer Match 45.78%

Does anybody know if there is a touchpad driver for this Toshiba model and when can it be find? If there is not, is there a chance that it will be provided?

A:Tecra A11-19E - touchpad driver for Win 10

A11 is not supported in Win10.
Windows Update might find a compatible driver.

1 more replies
Answer Match 45.78%

I've upgraded to windows 10 only recently, and now  i cant use my touchpad, and when i go to the device manager it has no mouse driver for the touchpad, i have to use a mouse...

A:Windows 10 no touchpad driver for e5-411

Hello, Have you tried to install one of the touchpad drivers (Elantech or Synaptics)?

9 more replies
Answer Match 45.78%

PLEASE HELP ME !
I've deleted the my toshiba nb200's touchpad driver.
I can't use my touchpad please help me .

A:Need touchpad driver for NB200

Please visit Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
Choose option notebook > Toshiba > NB200 and you should be able to find it.

Post please exact model name and OS that you use and we can give you link for direct download.

1 more replies
Answer Match 45.78%

Hi,
I recently uninstalled the driver software for my touchpad in order to fix other problems, and now I can't figure out how to reinstall the driver. I tried updating the driver, which did nothing, and it won't let me "roll back" the driver. Any tips?

Thanks,
- slizz

A:Touchpad Driver Reinstall

I would recommend going to Dell's support page and download the proper drivers for your computer.
Drivers and Downloads | Dell [United States]
Jerry

1 more replies
Answer Match 45.78%

My laptop's touchpad works better when the generic windows driver is installed, rather than the Synaptics driver. Except the generic driver doesn't have scrolling capabilites. Is there an alternate driver for Vista laptops besides Synaptics??

The specific problem is the touchpad click. It takes 3-4 touches to get a click. I modified the settings to the most sensitive, yet this doesn't solve the problem. It clicks every time on the first point without the Synaptics driver.

A:Alternative Touchpad Driver

Try the Hotfix for Vista touchpad-
support.microsoft.com/kb/932653/en-us


link to hotfixes are here:
Windows6.0_KB932653_x86

Windows6.0_KB932653_x64

1 more replies
Answer Match 45.78%

Hi all

I recently performed a full format and reinstall of vanilla Windows 7 Ultimate on an Acer 6920G. It has a scroll line beside the touchpad so I installed the appropriate Synaptic driver (SynTPEnh.exe) which works successfully. The problem is that ewvery time I reboot the driver automatically asks to be reinstalled. If I run it the touchpad works as expected but if I cancel it then it's as if the driver was never installed. Strangely, Programs and Features shows a listing for 'Synaptics Pointing Device Driver' before I run/cancel the install request. I've tried the obvious things - uninstalling, re-downloading, reinstalling, etc - to no avail and I have no idea why the driver would get stuck in such a weird loop. Any suggestions as to why it happens or how to fix it would be much appreciated.

Thanks

More replies
Answer Match 45.78%

I have a 2 week old Inspiron 2 in 1 15 7558 i5 8G 500GHD. Running Windows 8.1 from factory.
The problem is I cannot control the touchpad. The biggest issue is tap to click. The entire pad including  the  buttons move the mouse and reacts to tap to click. This is very frustrating because when I touch the pad all kinds of crazy mouse clicks register or when I try to click a button the mouse cursor moves because the button is part of the touch pad.
All I want to do is disable tap to click. When I open control panel/mouse there is no touchpad tab nor controls for the touchpad. In device manager the driver for the touchpad/mouse shows up as a MS Mouse driver from 2008 which seems very wrong, especially since it came this way from the factory. I have checked the Dell driver site for a different driver both by model number and service tag, no touchpad driver or app. I have found synaptics, alps, ealn and Cyprus drivers on the web but none of them work.
Any fix for this? Seems like disabling touch to click should be a no brainer.
Thanks
Don

A:7558 touchpad app/driver

>>BTW your link goes to the 7568 and I have the 7558oh,sorry...I'm not a native speaker of English, and then apologize when there is a mistake.Methods that are introduced in this page(www.ryukent.com/.../fixed-install-synaptics-touchpad-driver-windows-8-1), I think it's probably the same way as you did.and, there is a description that I think it important. My System do not Display Synaptics Tab in Control Panel :( But Run Program Files \ Synaptics \ SynTP \ SynTPEnh.exein this case, I think that even if there is no tab of synaptics to control panel,the installation has been successful.Thus, if registry information on synaptics is recorded and customize it, I think it is possible to invalid tap to click.The registry entry of my laptop with synaptics is in HKEY_CURRENT_USER \ Software \ Synapticsis there records of registry on synaptics in your pc?
At the same, either, but this is not a solution, is it possible to use the function of this software?forum.tabletpcreview.com/.../twofingerscroll-v1-0-7-update-two-finger-scrolling-done-right-more.38405I usually use the one of the functions that are provided by this software, -  when you are touching with one finger, will click when you tap on the other one finger -by this function , I make it easier to click after moving mouse cursor with trackpad.this software is for trackpad of synaptics ,so I hope this app help to use trackpad of your laptop.

9 more replies
Answer Match 45.78%

Hi,
I have installed Windows 8.1 x32 on my computer. I have:
DELL Inspiron 15 3542
Service tag: G42K312
DELL doesn't support x32 Windows 8.1, so please guide me on how can I use my touchpad. I need only touchpad.
P.S. I don't want to change to x64.
Thanks!

More replies
Answer Match 45.78%

Hi:

As many other people after upgrading to W7 I lost the scroll function on my touchpad. I've tried with the several Synaptics drivers (including the last version of the generic driver) but nothing seems to work. Of course my old XP drivers are not working under W7.

Any suggestion???

Toshiba Satellite M40X-115.

A:Touchpad Driver - Toshiba

have you tried toshiba direct? whats the short model number on that laptop? (should be on the bottom somewhere) makes it easier to find the driver

6 more replies
Answer Match 45.78%

I've upgraded to windows 10 only recently, and now  i cant use my touchpad, and when i go to the device manager it has no mouse driver for the touchpad, i have to use a mouse...

A:Windows 10 no touchpad driver for e5-411

Hello, Have you tried to install one of the touchpad drivers (Elantech or Synaptics)?

1 more replies
Answer Match 45.78%

i recently purchased dell vostro 3558.
i installed windows 8
when i downloaded and installed the touchpad driver from dell support, the driver wast installed tbut it did not asked to restart. the next dialogue box showed that the driver is installed but it wasn't installed at all.
i didn't find any synaptics in "show hidden icons" and the aditional features like multitouch scroll etc are also not working. please help

More replies
Answer Match 45.78%

Hello

I've just got a new Samsung Laptop, and it has a precision touchpad (from Synaptics) in it. I'm trying to find a way to disable the "Precision" bit of it, so I can use synaptics own drivers, which have more options (specifically, the palm control on it is awful, and the cursor jumps all over the screen when typing, and selects different input areas, etc. and I want to enable one finger scrolling, which isn't possible with Windows/precision). However, I'm really struggling to do this. I've downloaded the drivers from Synaptics site, but when I disable the device, install this driver (by manually selecting it using have disk), and restart, the touchpad doesn't work at all. If I install the driver by running setup, it appears to install fine, but makes no difference. If I let Windows choose the driver, it reverts back to the precision settings that I don't want!

Been searching all day trying to find something, but no joy - any suggestions?

Thanks

Charlie

More replies
Answer Match 45.78%

Recently i have changed my OS (win 7 64 bit). I collected all the driver from hp website for my model.everything is working well without synaptics touchpad driver.I need very much two finger scrolling option but i cant use it for the bsent of working touchpad driver.what shouldd i do now? 

A:Touchpad Driver problem

Hi: See if the driver directly from Synaptics works for you if the one on your notebook's support page didn't. 3rd one on the list... http://www.synaptics.com/resources

1 more replies
Answer Match 45.78%

So I have an HP Elite Book 8730w and when I started using the system I couldn't access any controls for my touchpad(I wanted them disabled. So I went to this site and tried to get help.... Where do I locate the ToushPad settings? .........It was reccomended that I download a new driver to get the options, so I did this and even though I now had options, they would not take and whenever I clicked on the mouse button it would say I had two touchpad drivers neither of which I could operate. So I tried uninstalling both of them and now the options are gone from the mouse menu, but I still have full use of the touchpad with no options........

So is there a way to uninstall all ability to use the touchpads? Is there a way to locate exactly how this touchpad is functioning, how does a touchpad operate without a touchpad, I want to disable all ability to use my touchpad.

A:My touchpad Driver, and issues.....

Not sure about your model of lappy, but on my wife's Compaq it is in Control Panel > Hardware and Sound > Then under Devices and Printers there is a Mouse option (link). It maybe running on a microsoft driver. I would check there first if you haven't already

Geeve

6 more replies
Answer Match 45.78%

Just Installed (clean install) Windows 7 64 bit on my laptop today, what a pain, tried an update first on my 32 bit but had problems so I decided to go ahead with installin 64 bit as my computer was compatible.

Anyway, got it installed and I'm re-installing my software.

Main problem is I can't seem to get a driver for my touchpad on my laptop which is a Fujitsu Siemens just over a year old. Fujitsu do not have 64 bit drivers but I got one from Synaptics.com which is supposed to be compatible and signed but when I try to run it I get the error message that it is not a Win32 app.

Anyone got an answer for me.

A:Synaptics Touchpad Driver

OK. Managed to find a driver which seems to work.

3 more replies
Answer Match 45.78%

Hello,
I just bought a Samsung np300e5z-s04 and i installed the ELAN touch pad driver on the CD included. The problem is that every time i start the notebook i have to go to Control Panel-> Mouse-> ELAN-> Options->OK to activate Scrolling, Zooming and all that. I'd be forever grateful if someone would give me some advice- some settings, or should i reinstall the driver and how to do all that.
I apologize if this thread is not in the right category :D
Thank you in advance!!
xoxo
Maria

A:touchpad driver not working

Hi and Welcome to TSF!

Pressing Fn + F5 will make sure your touchpad is enabled. Besure that it is enabled then restart. Does the problem still happen?

If yes then you can redownload the correct driver at samsung.com.

3 more replies
Answer Match 45.78%

I have recently installed 7 on my Dell Inspiron 1525 laptop, which was originally running Vista. Now that I have 7, I cannot find a way to change my touchpad sensitivity or enable scrolling on the touchpad.

I downloaded the Synaptics touchpad driver, and a Synaptics 'Device Settings' tab becomes available when I go to mouse properties in control panel. However, when I click on 'Settings' in this tab, the window that opens only has two menu items: Overview, and Buttons. There are no options to change sensitivity or enable scrolling.

Does anyone know what I can do to enable scrolling and adjust the sensitivity? It's very important, as I can't even type without the cursor jumping around due to sensitivity.

A:Touchpad driver problem

  
Quote: Originally Posted by stormyx


I have recently installed 7 on my Dell Inspiron 1525 laptop, which was originally running Vista. Now that I have 7, I cannot find a way to change my touchpad sensitivity or enable scrolling on the touchpad.

I downloaded the Synaptics touchpad driver, and a Synaptics 'Device Settings' tab becomes available when I go to mouse properties in control panel. However, when I click on 'Settings' in this tab, the window that opens only has two menu items: Overview, and Buttons. There are no options to change sensitivity or enable scrolling.

Does anyone know what I can do to enable scrolling and adjust the sensitivity? It's very important, as I can't even type without the cursor jumping around due to sensitivity.


Has to be the wrong driver I have the same computer and there are more tabs. You can use the vista driver if you install it in "compatibility mode"

1 more replies
Answer Match 45.36%

Been reading here and using win 10 from the outset. On latest build, updated this morning.

This Elan touchpad driver keeps coming in through windows update and it just screws up my touchpad more than anything. When it loads up I can no longer use right or left click functions on the touchpad. I can find no way to stop the update.

Is there any method for stopping a particular windows update from loading? I keep uninstalling it but it comes back all the time.

I am on an Asus G750J laptop.

Thanks for any help. Hopefully there is a simple fix that just eludes me.

A:elan touchpad driver update

Welcome to the forums doorules. At this stage you can not stop updates. Hopefully that will be available as an option soon.

26 more replies
Answer Match 45.36%

I currently have two issues with my drivers.

My touchpad has completely stopped working, which is a minor inconvenience at this point given that I can still use a mouse. However, I would still appreciate a solution as to how to fix this.
Teredo Tunneling Pseudo-Interface will not start. I have tried uninstalling it and installing it again, but there is no change.
If anyone could help with these issues, I would be most appreciative.
 

A:Driver Issues - Touchpad Won't Work

16 more replies
Answer Match 45.36%

Hi 2 days ago I bought a acer notebook.The touchpad is working but not the gestures.If i go to the "mouse settings", there are no specific settings for my touchpad.Just the normal mouse settings like pointer speed...I already downloaded the 2 driver which are on the acer support site:TouchPad_Synaptics_18.1.2.1_W81x64_A and TouchPad_ELANTECH_13.6.1.1_W81x64_A.I have installed boot of them sucesfully (there was the green pick). So what to do now?Does anyone have ideas? Also for ur info there are no warning signes for unknown devices in the device manager. Thanks Sorry for my bad english, I'm not a native speaker.

A:Aspire E5-511 Touchpad Driver not working

quaycom,
 
I am sorry that you having problems with the touchpad its gestures. I can assure you that the touchpad is working, however your touchpad is not a ELAN or Synaptics. It looks like we are shipping Precision touchpads with a lot of our newer Windows 8.1 products.
 
What this means is that the gestures you are use to are no longer the same and you have to go to a different location to manage your touchpads settings. For a better idea and explanation of Microsofts Precision touchpad and gestures, please visit http://windows.microsoft.com/en-us/windows-8/touchpad.




Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.

9 more replies
Answer Match 45.36%

   This is now the third forum I have posted to regarding this issue.I've been to Sevenforums and to the HP forums.I don't know how/when this happened (because I rarely restart my pc) but,I recently had to restart after some updates and after restarts now it seems that I have to physically load the Synaptics touchpad driver in order for things like (in particular) two finger scrolling) to work.
  
    I uninstalled the Synaptics driver (because Synaptics site has a newer version.HP,so far,isn't supporting the new one). I was instructed to restart the pc after uninstalling the old driver and before installing the new one.That's when the problems started.After booting to the Windows login screen,the keyboard became disabled and I was unable to use the pc.
  
    I've done a system restore and all is back to normal.But,I'm still left with the original problem (having to physically load the Synaptics software because it's not loading itself). Have any of you ever experienced this problem and if so,how did you remedy this situation ?
                                                  
               ... Read more

A:Synaptics Touchpad Driver Not Loading

Honestly...if you have an HP system...you should get your drivers for basic functions from the HP website.  Theoretically, all drivers for a specific item SHOULD be useable...but "should" is a word that often does not apply to OEM systems, IMO.
 
Louis

3 more replies
Answer Match 45.36%

hi all, recently i just bought acer laptop. it is "ASPIRE E 14 E5-473G-36WZ" for spesific.I use windows 10 64 bit.Now the problem is i cant right click using 2 taps or scroll using two fingers scroll. I tried to check my touchpad manufacturer via device manager but all i get just like this(it is not synaptic or elantech)so i decide to try to install both driver but none of that works. i also tried using twotapsclick from github but some class are missing, which is because synaptic driver doesnt installed properly. the "regedit" trick doesnt works too.. any advice??

More replies
Answer Match 45.36%

For the Dell moderators monitoring this forum...please discuss providing non-Microsoft touchpad drivers.  My primary complaint for my machine is the touchpad.  After reading several other forums with similar complaints, there seems to be a lot of people that insist that the Dell XPS touchpad issues stem from using Microsofts circa 2006 generic "precision touchpad" driver.  There isn't much ability to adjust settings with it, and the 2-finger scroll function is terrible.  I have tried some other suggested solutions, like installing generic Synaptics drivers, and they fix some things, but introduce other issues as well.  Can Dell please consider releasing some better drivers to improve the performance of the touchpad?  

More replies
Answer Match 45.36%

Hi all,
I'm new to this forum. I recently purchased a new Dell Laptop (Vostro 15 3559). It is a Brand New one. But I am facing one problem since the beginning. It is with dell touch pad driver. With the touch pad driver installed, whenever I using touchpad system process show high cpu usage(20%-30%). This is so annoying, and it eats battery. When touch pad driver is uninstaller, the problem disappears and system process become normal. But without driver touchpad is not smooth and no gestures. I tried with different drivers and uninstall and installing newest drivers, clean install of windows, but no luck.
My system is,
i5 6200U
8Gb ram
Windows 10 pro 64 Bit
Please give me a solution guys.

More replies
Answer Match 45.36%

I have no scrolling no gestures. I have deleted and reinstalled the driver many times with no success. Help please

More replies
Answer Match 45.36%

ok the main story is ive had my Hi-Grade laptop for a few months now and suddenly i find myself clickin 5 or 6 times to do anything

the built in touchpad has never given me hassle till now and thts alot of hassle

even now i have to use the touch sensor to click because the buttons are annoying me soo much

if anyone has any idea what i can do

More replies
Answer Match 45.36%

My laptop is Acer E5 573G-37Y5. I have windows 8.1 installed on it and I find lot of issues with my laptop. The major issue is the touchpad driver. There are two drivers for touchpad are given by Acer, but neither works for me. I tried the installation several times and ended up having no luck at all. This is driver information..  You can see that the driver for the touchpad has not been installed. please let me know how to solve this annoying issue? I am fed up with Acer now. Spoiler (Highlight to read)  

A:Touchpad driver not getting installed on E5 573G-3...

You may not have neither Elan nor Synaptics Touchpad and may have Precision Touchpad. Have a look at this link. http://windows.microsoft.com/en-us/windows-8/touchpad

6 more replies
Answer Match 45.36%

Hi, I've just upgraded from Windows XP Home SP2 to Windows Vista Ultimate on my Toshiba Satellite a100. I was wondering where I could download a driver for Synaptics touchpad that works? I tried the generic drivers from Synaptics' website, but they do not install completely (the second component always fails to install). Then I tried the ones from Toshiba's website, but The Vista-compatible ones display an error that says error code "#5B4 @10". Then I tried The Windows XP-compatible drivers, and they work perfectly, except the fact that I cannot configure enhanced features such as virtual scrolling and tap zones.
I click on the icon in the tray, click on The Device Settings tab, and whenever I click on The Settings button nothing happens. Any help?

A:Synaptics touchpad driver for Vista 32 bit?

What model toshia A100 what?

17 more replies
Answer Match 45.36%

NEED touchpad driver (VGN-FW 250J Laptop)

* Greetings,
I had to rebuild my Sony Vaio (VGN-FW 250J Laptop) Operating system,
from win7/64 UPGRADE disc (originally used for vista to win7) .
All went well, except that now I can no longer DISABLE TAP
on the mouse/touchpad. (Driver = mouclass.sys)

Can someone PLEASE aim me at the correct driver, the exact name, and where I
can download it. I don't mind paying for it. But I do need to get the correct one.

Thank you very much...Vernon

A:NEED touchpad driver (VGN-FW 250J Laptop)

Hi,
You can go to manufacturer website and download the drivers for touch-pad ( it would be under pointing devices) also providing the link for reference: please select which version of windows 7 you have on the computer ( 32-bit or 64 bit)
Sony eSupport - VGN-FW250J - Drivers & Software

4 more replies
Answer Match 45.36%

hello guys I am trying to change settings for the synaptics touchpad driver, and I when I go to my mouse settings and click device settings and settings after this all it does is give me an overview and information about it and I can't change anything and this is frustrating me because I want to set my touchpad to where I am comfortable using it any information on what I can do is helpful thank you very much

A:Need help with Synaptics touchpad driver version 16

Hi there ... Download the Driver from the Lenovo website and Re-install it ... That should Restore your Settings ...

7 more replies
Answer Match 45.36%

Touchpad just stopped working while I was using it. Here's what's going on:

Fn + F7 does nothing
Synaptics ps/2 Port Touchpad shows in Device manager, however it is hidden and has a yellow exclamation point. Error code: This device is not present, is not working properly, or does not have all its drivers installed. (Code 24).

I have updated the drivers from the Gateway website by first uninstalling the drivers that were present. No go. I then updated the drivers from the synaptics website via the same method, nothing. I've tried searching for a driver via device manager....nothing.

As I mentioned, I tried Fn+F7 and nothing happened. Also I notice that the driver software is not loading in the tray like it used to and I can't even make it run by trying to open the .exe file.

Any ideas? I've been searching for an answer for this for a while with no luck.
 

A:Synaptics Touchpad Driver Problem?

16 more replies
Answer Match 45.36%

 I can't seem to update my touchpad driver. I downloaded  and ran this version. 19_0_17_57_WHQL4/21/2016 But when I check to see if it installed, the driver installed is still the driver from 19_0_17_57 from Jan 6,2016 Help... Thanks,   

More replies
Answer Match 45.36%

As topic reads.I installed my Thinkpad Edge 320 today and it works like a charm with Windows 10 (64-bit) except that I can't find a touchpad driver that works with this OS.At the moment I have connected a USB mouse but that is not a sollution I am pleased with for the future.The keyboard runs just fine, I'm writing this text on it.Please help me out if you can =)

More replies
Answer Match 45.36%

Inherited a TOSHIBA SATELLITE laptop computer (2008 vintage) from my daughter. It had VISTA on it and an old version of IE. Would not update IE saying it was 'not computable with OS'. So I installed w-7 allowing the 'C' system partition to be overwritten; then installed SP-1 update. Works fine now, except I need to update the touchpad driver. Synaptics was original driver but was erased on the w-7 install. Tried to see if the available download for VISTA from Synaptics might work but it will not install.
The touchpad as it functions from the W-7/SP-1 is pretty sad in my way of thinking. Is there a program or driver I might install to improve it to something similar to as-it-was or maybe better?
Thanks

A:Toshiba Satellite touchpad driver?

Have you tried here?

Synaptics Drivers

5 more replies
Answer Match 45.36%

As topic reads.I installed my Thinkpad Edge 320 today and it works like a charm with Windows 10 (64-bit) except that I can't find a touchpad driver that works with this OS.At the moment I have connected a USB mouse but that is not a sollution I am pleased with for the future.The keyboard runs just fine, I'm writing this text on it.Please help me out if you can =)

More replies
Answer Match 45.36%

I have a Lenovo Ideapad Y510P with Windows 8.1. For months or longer, I have been having an issue with the touchpad software. After days of use it will stop responding to advanced commands like two finger scrolling unless I restart the computer. If I try to access the icon in the right corner on the taskbar, the application will not open. It cannot be right clicked. If I try too much the taskbar freezes. I tried to access Mouse in control pad - no response, I couldn't access it. I tried to look for updates for the driver and it would always say it is totally updated or when I manually download one it would say that it is already installed or something.

So today I decided I would fix this problem. I uninstalled the application, and removed the driver in the Drivers section in control panel. I downloaded the program again from the Synaptics site for my computer and tried to install.

The message: "A previous version of the Synaptics TouchPad Driver is installed. If you continue installation, the driver may not install properly. To avoid this problem, press 'No' to exit setup...

I never pressed no the multiple times I tried to install and install would always fail after about 15 seconds. I then looked for traces of Synaptics on my computer in Program Files and Driver folder. Deleted all Synaptics folders and emptied recycling bin.

Problem still persists. Need help. I rebooted my computer a couple times along the way, but not after I deleted those folder... Read more

A:Cannot Re-install Synaptics TouchPad Driver

It could be a physically bad touchpad...

Does the installer have an option for "clean install"?
 

2 more replies
Answer Match 45.36%

I have good news for laptop users with built in ALPS Touchpads. Acer/Gateway (same company) have been generous to create a new driver for Windows 8 32/64-bit users.

To make sure that your ALPS Touchpad may be compatible with this new driver for Windows 8, make sure that before upgrading to Windows 8, in Windows 7 open Device Manager, check the "Mice and other pointing devices" category and your Touchpad should be listed as "ALPS Pointing-device".

If it is, then you are a candidate to install the newly released drivers. Click the link for a direct download from Gateway.

The link below is for driver verison 8.100.2020.112 (Windows 8 32/64-bit)

http://global-download.gateway.com/G...TEWAY&SC=PA_6G

The link below is for driver verison 8.100.2020.116 (Windows 8 32/64-bit)

http://global-download.acer.com/GDFi...31503054303608

Instructions:

1. Unzip the file.
2. Double-click on setup icon and install.
3. Reboot.

After installation, this new driver adds Windows 8 gestures that are found on Microsoft Surface and other tablets for the TouchPad. There are other features there, but those are up to you to experiment with.

You can access the TouchPad settings by either clicking the TouchPad icon in the taskbar or by going to Mouse Properties in Control Panel.

==================================================================================

For users that have tried this driver and the swipe gestures do not work, it might be that your ALPS TouchP... Read more

A:Windows 8 ALPS TouchPad Driver

Just upgraded my Dell laptop to Windows 8 and could not deactivate touchpad when using Bluetooth or USB mouse. I downloaded the ZIP file using the link above, unzipped it, and installed it. I works on my Dell Inspiron 1545. The ZIP file contains both 32 and 64 bit versions. Many thanks for guidance and explanation.

5 more replies
Answer Match 45.36%

Hi! I've been trying to solve a problem with my mother's netbook for some time now....Don't know what's causing the problem. Details are below:

Type of computer: Asus Eee PC, running Windows XP (purchased Fall 2009)
Background: no P2P, other file sharing, has McAffee protection installed

Symptoms:
1) upon startup, touchpad does not work--must use left click
Usually goes away after user resolves issue 2)
2) Any empty field (such as the Run command, or sign-in to Gmail) is autofilled with ;;;;;;;;;;;. Once user deletes the ;;;;;;;, issues 1) and 2) are resolved
3) repeated boink-boink-boink sounds, like a command was entered too many times

Attempted (and failed) solutions to date;
1) full McAffee system scan
2) CHKDSK C: /F /R run in safe mode
3) checked Task Manager for suspicious programs/activity levels
4) reinstalled touchpad and keyboard drivers, adjusted settings
Any suggestions on what else I can try?
Thank you!!!

A:Asus Eee PC: touchpad driver and ;;;;;;; autofill

Hi and welcome to TSF as a test can you uninstall mcaffe at least temporarily use microsoft security essentials as a alternate,use this to remove it How to uninstall or reinstall supported McAfee consumer products using the McAfee Consumer Products Removal tool (MCPR.exe) then see if the issue is still there
Microsoft Security Essentials - Free Antivirus for Windows

2 more replies
Answer Match 45.36%

I need a "good' Alps touch pad driver.
Something with similar options such as synaptics....preferably swipe and coast scrolling. All of the Alp drivers I have tried have jumpy scrolling ...jumping a few lines at a time rather than matching actual finger movement.
Since Alps touchpads seem to be gaining popularity with the manufacturers,I am hoping a good driver now exists.

I have found one that didnt jump a few lines{precision scrolling} at the dell site but it didnt have continued scrolling...meaning when your finger reached the bottom corner,scrolling stopped rather than continued until lifted or moved back up.
I would settle for continued scrolling without the jumping of lines{precision scrolling}....but opt for the coasting feature.....So in a nutshell I need precision scrolling..with continued and or coasting scroll options.

If anyone has a good alps driver on their laptop or knows of a good Alps touchpad driver..I need the model number for the unit or the version number of the driver
 

A:Solved: Alps touchpad driver

9 more replies
Answer Match 45.36%

I have a Lenovo G530 4446-25u. Recently my Windows XP partition became corrupted after a system recovery which forced me to initiate a recovery install. This wiped out the touchpad driver I had installed. So I re-downloaded the package from the Lenovo website which installs the Synaptics Pointing Device software and ALPs Touchpad Driver automatically. The thing is the ALPs Touchpad Driver always fails to install with no indication why. The reason this is annoying is because my touchpad is extremely sensitive and it is always clicking when typing. Without this driver in XP I cannot disable tapping. This has turning into a major issue believe it or not as I use my laptop generally to type papers and take notes during lecture. I've also tried installing the driver in safe mode but I get the same results.

Thanks in Advanced,
Dobster936
 

More replies
Answer Match 45.36%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8 Pro, 64 bit
Processor: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3032 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family (Microsoft Corporation - WDDM 1.1), 14 Mb
Hard Drives: C: Total - 223434 MB, Free - 163950 MB; F: Total - 476906 MB, Free - 464199 MB;
Motherboard: Dell Inc., 0G848F
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled

Inspiron 1545

For some reason my Alps touchpad was enabled I had disabled it awhile ago
Now trying to disable my Inspiron touchpad.
Touchpad button not shown in device manager for mouse
Tried to download following ALPS touchpad drivers but cant run them they say they have compatability issues and Microsoft has no soulition
R270497, R228446
I have disabled touchpad before by downloading a driver not sure what driver i used only know it was for Win 7 as
Win 8 had no driver at that time Think driver I used was R270497
Any help greatly appreciated.

Ellis
 

A:Solved: Alps touchpad driver

7 more replies
Answer Match 45.36%

Installed 32-bit Win 8.1 onto a Dell D610 (Pentium M 1.86GHz 2GB RAM) and it really works very well. Except for one nagging problem - the 4 left/right click buttons do not work! I have tried several drivers and all give full touch pad functionality (scroll and tap/click) and the keyboard stick works - but both sets of left and right buttons refuse to do anything. All worked with Win 7, so I assume it is a driver problem. I currently have a Logitech USB wireless mouse attached which works fine, but I would like to get the buttons on the laptop functioning.
Any ideas which driver may work?

A:Win 8.1 touchpad driver for Dell D610

Hello Procrastinus,

I'm surprised you were able to get Win 8.1 installed and working with that older hardware. Anyway, can you tell us the touchpad driver version you are currently using so we have a baseline for investigation?

3 more replies
Answer Match 45.36%

Hey All,
I have had this problem since installing windows 7 beta, and have not been able to find a fix, so here i go...

I have a Dell XPS m1330 and exactly 50% of the time my dell synaptics touchpad mouse driver does not work. What I mean by that is every other time i boot my computer device manager says "code 10: device cannot start". I have tried installing the lastest Dell Vista drivers for the touchpad, and I have even gone straight to synaptics website and downloaded their latest drivers as well. Neither fixed the problem.

If anyone has any idea's that could help me with this problem it would be appreciated.

A:Dell touchpad driver cannot start

hello madchills and welcome....

have you tried these drivers?
Drivers | Synaptics
while they might be generic we can at least check if the base drivers work...

9 more replies
Answer Match 45.36%

So I wanna install it for my Vista Ultimate, but none of the editions will install properly. The version for XP installs properly but I cannot configure its settings ... The Vista version doesn't install completely. I really like the virtual scrolling feature, so is there an alternative?
I installed an earlier version (for XP) and it works, but I can't change the settings. I click the icon in the tray, click Device Settings tab, and click Settings under Devices. Normally a box should pop up but for me nothing at all happens.
 

A:Synaptics touchpad driver for Vista

7 more replies
Answer Match 45.36%

So today i installed the drivers for my razer deathaddder mouse on my laptop. The installation went fine, but the problem is it seems to have taken over or just messed up the configuration for my touchpad. After installing, the touchpad moved really slowly even though i hadn't changed any settings, and the acceleration had turned off.

I decided to uninstall the drivers to reverse the problem, but it didn't change. I then uninstalled and reinstalled the touchpad drivers (latest synaptics drivers, same ones i had installed before), but this didn't solve anything either. I've tried fiddling around with the mouse settings but everything is configured the way it was before, it's just not the same.

I want my touchpad to go back to the way it was. Is there any way to get all the mouse settings back to the way they were when i installed windows or something like that?

Thanks.
 

A:mouse driver / touchpad problem

10 more replies
Answer Match 45.36%

Okay, on my laptop, the process SynTPEnh.exe governs the touchpad. For some reason, after my laptop has been on for a while, the process quits. If i restart the process, it usually closes again within 15 seconds of the process being restarted. Does anybody have any insight about what causes this and how it can be stopped?

Also, after i restart the computer, SynTPEnh.exe stays on for a while and the cycle i described previously continues.
 

A:Synaptics Touchpad Driver Closing

Go to the PC manufactures site..download the latest driver..often times a new driver comes out to fix bugs etc.

Uninstall the driver through "programs" in the control panel...do not use device mgr

Reboot..install the driver you downloaded and saved...install and reboot.
 

3 more replies
Answer Match 45.36%

Keyboard and Touchpad Crashes with Windows Update KB 890830 -
Malicious Software Tool - March 2009.
After installing the above update on a Fujitsu Lifebook E 8410 Laptop
(Windows Vista Business) , I lost use of both my Keyboard and my Touch
Pad. The wired USB Mouse works OK. Used Windows Restore and the
system returned to normal.

When installing KB 890830, my Bit Defender 2009 Virus Scanner identifies a
Trojan.Generic.1487884 (file reference is US30Kbd2K.sys) in
C:\Windows\System32\Drivers and deletes same. Also, when running
Windows Defender on its own, Bit Defender again pops up and also deletes
file US30Kbd2K.sys.

My keyboard drivers are listed in Devise Manager as i8042prt.sys,
kbdclass.sys and US30Kbd2K.sys - the latter is possibly a trojan. However,
when US30Kbd2K.sys is removed (either manually or by Bit Defender) the
keyboard and touch pad will not work.

Can you suggest please how I might overcome this problem. I have curently
removed KB890830 (March 2009) from my system to keep it working.

Cheers

More replies
Answer Match 45.36%

The touchpad on my HP G62 laptop was less responsive than normal. I tried changing the properties with no improvement. So I went to HP help and noticed that there was a driver update for this device. So I ran the update. Then the touchpad barely worked at all and a notice box said the driver was incompatible with current system. The advice on the web included more than one remark advising to not bother with the Synaptics website as it is unreliable. I did it anyway. Synaptics recognised I had a legal copy of Windows 7 Home and I downloaded the suggested driver. Which actually was a new version entirely. Now the pad is back to life just like old times. The HP update was outdated. Every time I have used any HP updates I run into problems. I suggest HP users forget all about the "Support Assistant" and seek more credible update sources. Thnx, gnuguy.

More replies
Answer Match 45.36%

I'm using and Inspiron 15 7547 laptop and the touchpad is really annoying me. I want to disable touchpad tapping but I can't find the settings. There's also a delay when I try to scroll using the touchpad I don't think this touchpad has a driver for itself so I can't seem to configure it. Is there any driver out there that I can download or a different way that I can fix this?

A:Touchpad is very difficult to use; is there a driver I can download?

Anyone?

17 more replies
Answer Match 45.36%

Okay, so, when i rebooted my computer, the touchpad didnt work
i went into the mouse drivers
and i didnt see my touchpad installed?
Im thinking that a virus may have knocked out my touchpad driver
picture attatched

how do i fix this?

Comptuer model

Toshiba A105-s4054

PLEASE HELP, IM USING A USB MOUSE!!!
 

A:Solved: !!!urgent!!!!!! Touchpad Driver Not There?!?!

Try reinstalling your driver. You can download it from here.......
http://www.csd.toshiba.com/cgi-bin/...fjkimmcgfkceghdgngdgnj.0&ct=DL&all_docs=false
 

3 more replies
Answer Match 45.36%

Hi folks,
I've got an annoying problem on a Compaq Presario 1510 laptop with XP home. There's this touchpad with a seperate scroll button. It comes with a "Synaptics pointing device driver" that lets you configure the scroll button and the extra functions of the touchpad (like edge motion, edge scrolling, sensitivity, slow motion, ...). Very often (every other day but usually sooner) this scroll button is without functions. The up-down-left-right functions are gone. The other functions of the touchpad remain as they were.
The only solution so far is to uninstall and reinstall this driver (it's the latest from Compaq). I keep this driver permanently on the hard disk just for this purpose. This is driving me crazy since it sometimes happens twice a day. It does not happen during working on the laptop, but after rebooting the functions are gone.
Don't know what's causing this behaviour. Is it the driver or (more likely) maybe a program that's allergic to this driver?

If anybody out here has an idea, it would be much appreciated!

Thanks, WSE
 

A:touchpad driver drives me nuts

6 more replies
Answer Match 45.36%

Hi,

I have just purchased a Dell computer (vostro 1320), with Windows 7. Everything was working just fine, when I started to get those blue screens errors. I seeked help from Dell, which told me to install WinDbg, to find out the problem.
After analyzing what caused the error, this program pointed the error was in a driver from Dell touchpad.
I contacted Dell, which said the problem was in the software, which was conflicting with windows, and then they told me to format the pc.
I am very reluctant in doing so, mainly because the pc is brand new, and every time I formatted my old pc, it never was the same, and the old problems always returned.
So, my question is: is there another solution for my problem? Maybe an alternative driver, which can substitute the one from Dell and does not conflict with windows! Can anybody help me, please???
Tks!

A:Driver from touchpad conflits with Windows 7

have you tried looking on dells site for a synaptics driver for your board and installing in vista compatable mode?

5 more replies
Answer Match 45.36%

Hello Everybody,
I am using a HP Pavillion dv6-2123sf laptop with Windows 7 home premium 64bit OS. I have Synaptic touchpad v6.5 driver installed for the touchpad. It gives an option to convert the touchpad configuration into a left-handed one. When selected, the buttons on the touchpad change but not on the USB mouse. Please suggest solutions to convert my USB optical mouse from a right hand to left hand.
Thanks in advance.

A:Synaptic touchpad driver configuration

  
Quote: Originally Posted by Chethan


Hello Everybody,
I am using a HP Pavillion dv6-2123sf laptop with Windows 7 home premium 64bit OS. I have Synaptic touchpad v6.5 driver installed for the touchpad. It gives an option to convert the touchpad configuration into a left-handed one. When selected, the buttons on the touchpad change but not on the USB mouse. Please suggest solutions to convert my USB optical mouse from a right hand to left hand.
Thanks in advance.


Hi Chethan , go to contol panel> devices and printers>mouse from there you can change the order of the L/R buttons

3 more replies
Answer Match 45.36%

Hi folks -  We have an Aspire 5733Z.  Now Windows 10 (It was originally Windows 8, and a while back, Microsoft eventually didn't give us a choice to update to Windows 10) It has a Synaptic PS/2 TouchPad.  I recently tried to update the driver for this TouchPad - as I thought maybe this would activate a 2-finger scroll that I've seen in other (newer) Windows 10 laptops recently. I downloaded from Synaptic website what seems to be the latest drivers for Windows 10 - a large zip file.  I installed the driver - seamingly successfully.  The touchpad still works (can move mouse and select, etc.) - but now when I look at the associated driver in device manager - the "mice and other pointing devices" is no longer listed as "Synaptic PS/2 TouchPad" as before, but now just simply "PS/2 Compatible Mouse".  Further - the original driver was dated something from 2011, and the current driver is now from 2006.  AKA it's not the Synaptic driver I just installed. So what am I missing?  I'm not an expert but know just enough to be dangerous  Any advice much appreciated. Thanks - Brad

A:Synaptic Touchpad driver won't update

For what it's worth - the driver is now: 10.0.14393.0 and the driver I downloaded from Synaptics and attempted to install was Windows 10 PS/2 & SMBus Devices v19.0.19.1

1 more replies
Answer Match 45.36%

Hi There,

I have a synaptics touchpad driver installed on my laptop it is listed in my mouse options under devices settings as "Synaptics Pointing Device - v25.0.4" and under devices in the same tab the name is listed as "Synaptics touchpad v7.2".

The problem I am having is that in the devices settings tab I have checked the box that says "Disable internal pointing device when external USB pointing devices is attached" because frequently the mouse cursor will jump around the screen when typing and mess up what I am doing. Problem is that when I want to use the touchpad and unplug the mouse, the touchpad will work fine until I shut down the computer. On startup (whether clean boot or restoring from standby) the touchpad will no longer work (with or without a mouse connected). When this happens I have tried a fresh reboot of the laptop, but the problem remains. I have tried reconnecting my mouse before shutting down or closing the lid of my laptop but the problem persists. Some times when using the touchpad the power cord on my laptop unplugs and when I plug it back in the touchpad no longer works, yet when I unplug the cord it will work again. I don't get any error messages when any of these things happen, they just happen without warning.
When I go into my mouse settings and go to the device settings tab, the devices list is now empty and all other options are greyed out, including the check box to disable the touchpad when a mouse is connec... Read more

A:Synaptics touchpad driver keeps breaking

Quote:
because frequently the mouse cursor will jump around the screen when typing and mess up what I am doing


That's a fairly common issue and my wife and daughter solved it by getting Toshiba Notebooks that have a switch between the touchpad and the keyboard to turn the touchpad off, both use a external mouse. The problem stems from the sensitivity of the touchpad and where a person's thumbs want to rest while typing. Adding to the problem is the type of touchpad that has the vertical and horizontal scroll areas.

I'd go into Device Manager and uninstall both instances for the touchpad and reboot, should install the drivers again, handy when an installation gets corrupted.

5 more replies
Answer Match 45.36%

My touchpad was working just fine then I began using a wireless Microsoft mouse at my desk. Then today I thought of trying it out once more and I noticed that my touchpad had stopped working without me noticing when. I have searched online for solutions and all I saw was the fn+f7 solution. On my model, this fn+f7 solution doesn't work, instead that is a shourtcut key to dimming the backlight of my screen. My touchpad has a switch above it which is probably the replacement of that fn+f7 solution. I turned it on and the touchpad was still not responding to my input. I restarted and disconnected the mouse, still no benefit. I checked under device manager "Mice and other pointing devices" and I noticed that the touchpad icon was not there, i.e. the computer was only recognizng the external mouse, not the built in touchpad. I looked under the "uninstall a program" menu and I saw a program called touchpad in there but I don't know why it is not in the device manger. hOW CAN i FIX THIS without having to take my Laptop to HP????



Is this a sign that computers have feelings, because it's appears that when you leave the touchpad for about a month because you are using a mouse, the touchpad stops functioning; it feels that it is no longer needed

More replies
Answer Match 45.36%

I am currently running Windows 10 on an Aspire VN7-791 but I can't seem to install the touchpad driver. I use the driver I find on the Acer websites for my model, and the install finishes and at the end of the installation it says that install has been complete. But I can't find any icon on the toolbar, nor can I find the application in my Uninstall list. I also tried the 8.1 driver, run as admin etc etc.. Another weird thing is that in the Device Manager there are two default touchpad drivers. Look at the attached picture. The hardware IDs for these drivers are:1: HID\VID_046D&PID_C52F&REV_3000&MI_002: HID\VID_O9CB&PID_2970&REV_0008&Col01 Please provide me with a working driver or a solution for the problem. 

More replies
Answer Match 45.36%

I recently gave vista the boot installed windows 7 on my Toshiba satellite A200-FT3 laptop. Everything went great however the touchpad doesn't seem to be functioning.

I've already installed the latest synaptic driver. The device manager even says that the device is 'working properly' however i can't get the pointer to move using the touchpad.

The 'Fn' functions work:
Fn+F7 to brighten
Fn+F6 to darken.

EXCEPT the touchpad: Fn+F9.

Does anybody have any ideas? =[

A:Touchpad Mouse driver not working

That is honestly something I have not experienced.
Did it work before you up installed the touch pad driver?
Have you checked all the setting making sure something funky didn't get clicked, by the ghost of vistas past?

Have you ran windows updates, after installing the drivers?
Have you tried uninstalling the driver then running win updates?

Are you getting tired of my questions?
If yes, Im done
If no, I can make some more up for you :P

2 more replies
Answer Match 45.36%

Everytime I have restarted my computer since last night the driver for my touchpad has appeared in my taskbar. It's slightly annoying, and I can't get rid of it. I have reinstalled the driver from Sony's website, toyed with properties, and yet it still shows up each restart. If I close the application, my touchpad will not work properly (ie shortcuts non-functional). The driver is from ALPS.
I did try and install AcidWarp last night, and Julian Fractal Screen Saver. I have since uninstalled them. I have attempted several system restores, but each time the restore fails. Any ideas how to get this damned thing to not show up in my taskbar?
Thanks!
Gordon

Here is a link to a picture of my desktop:

http://i14.photobucket.com/albums/a332/gwmock/alps.jpg
 

More replies
Answer Match 45.36%

I am in the process of downgrading Yoga 3pro to Windows 7-64.Having trouble to make touchpad work at all (neither with Synaptics drivers, no without-). Tried a few Synaptics drivers from different Lenovo models as well as a generic Synaptics driver. They either fail to install at all or never show up in Windows Device Manager. Any ideas?

A:Yoga 3 touchpad driver for Windows 7

Any news with driver for touchpad for Win7?

1 more replies
Answer Match 45.36%

i just installed windows 8 pro 64 bit on my lenovo z580 and downloaded the synaptics touchpad driver for same operating system from the lenovo website. but when i install it in C:\drivers it says that-"you have to run the 64 bit version of DPinst.exe on this machine." PLEASE HELP, although my touchpad is working, the cursor is too slow and i cannot scroll with it.

A:windows 8 synaptics touchpad driver

You could try the "Vanilla" Synaptics drivers.

Drivers | Synaptics

1 more replies
Answer Match 45.36%

Hi!
About 2 months ago I bought this super gaming laptop by Toshiba(on sale 1 yr old and guarantee expired)(Store didn't tell me that part)and of course, I use it for gaming.
Last month I was into FPS and the touchpad kept getting in my way since the palm of my left hand kept swiping over it and I got killed easily.
therefore, to get rid of the problem, I disabled it from BIOS ( the updated 2.10 BIOS version ) and when I got out of the FPS spirit, I wanted to re-enable it again. but for my surprise it wasn't working!
I tried EVERYTHING I could think of.
-returning bios to original settings
-recovering my laptop to out-of-box state
but nothing.

does anyone here have ANY idea of how I can re-enable it again?

PS: Talked with a Toshiba representative and he didn't help me at all!

A:Toshiba laptop touchpad driver

Hi GKahn
Welcome

Try looking in control panel for mouse , see if it can be enabled from there.

You can also try hitting the fn key and f9 at the same time. On Toshiba that should lock and unlock the touchpad.

I have a Dell lap top, I am going by memory from what I have read in this Forum.

2 more replies
Answer Match 44.94%

Recently I have installed Motorola Phone Tools V.4 on my Aspire 8920G that I have had since August everything had worked fine untill I had shut down the laptop for updates then my touchpad, audio, and keyboard aren't working. I have tried using the system restore but it says "An unspecified error occurred during system restore". I NEED HELP!!!
 

More replies
Answer Match 44.94%

Hello,  After upgrading to Windows 10, a new version of the Synaptics Touchpad driver for my X220T was automatically installed. However, I soon found that 2-finger scrolling is extraordinarily slow, even after manipulating some of the Synaptics control panel settings such as "scroll speed", and that "inertia" pointing has been turned on by default, which is very annoying.  I have been able to hide the update for now (using the wushowhide.diagcab tool) even though hiding updates in Windows 10 is far more convoluted than in Windows 8.1 and have installed the Windows 8.1 driver from Lenovo Downloads instead.  My question is, when will a driver from Lenovo or with appropriate fixes from Synaptics be released? William

A:Terrible Windows 10 Synaptics Touchpad Driver

I need a new driver as well.  Because of the 'resizing mouse pointer' problem when pressing the middle trackpad button on my X1 Carbon 3.  (sucks to have to deal with this on a new ($$$) machine) here's some links...   BTW I had this problem on both win 8.1 and win 10.  https://forums.lenovo.com/t5/ThinkPad-W-Series-Laptops/Cursor-becomes-very-small-on-W550S-with-high-... And... https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-Mouse-Pointer-Size-Changes-Constant...    

2 more replies
Answer Match 44.94%

i have laptop product name: vaio sve14132cvb (model: sve141r11w) and i installed w7 professional 32bit.
But i don't use "Fn" function button to enable/disable touchpad and mute sound.
i downloaded and setup touchpad driver on "http://www.sony-mea.com/support/download/507914".
But it didn't use.
Can you help me?

A:Help me: driver touchpad vaio sve14132cvb for w7 32bit

Help me, pls!!!

5 more replies
Answer Match 44.94%