Tech Problem Aggregator

Too much disk space consumed for "System Volume Information"

Q: Too much disk space consumed for "System Volume Information"

Using XP SP-1, 40GB HDD
A folder named "System Volume Information" has been created in each drive (C:,D:,E:,F: )
and consuming significant disk space day by day. Whether deleting these folders will create any problem. Any other technique to stop increasing the size of these folders ? Please suggest.
Presently consuming more than 3 GB in total.
Sometimes I need system restore to speed up the PC (besides other registry tools ) ..therefore this function is enabled in the system.

A: Too much disk space consumed for "System Volume Information"

9 more replies
Answer Match 84.9%

All of the sudden my "System Volume Information" folders (the system restore folders) on all of my hard drives are shown even when viewing hidden files is off. Tried to mark them hidden, but it won't let me. Anyone have a clue as to why they would suddenly unhide themselves and not allow me to hide them again? This is on XP Pro with no service pack1 installed. Just bugs me they did that all of the sudden. Haven't installed anything recently except Paint Shop Pro 7 and Easy CD Creator 5.2 plus the update patch to 5.3.

Thanks,

Smith
 

A:"System Volume Information" folder won't go "hidden"

11 more replies
Answer Match 82.8%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Answer Match 82.8%

Here's the story. I bought this new Samsung 840 250GB SSD.
I first did a clean install of windows 7 on it and it worked fine. Windows installed without much problem and everything. Then something didn't look right about the partitions. It looked like because I had all my HDDs connected while installing windows on the SSD the windows created the system reserve on the old HDD rather than the SSD. So I went back and decided to start from scratch with all the HDDs except for the SSD disconnected. I tried reinstalling windows on it but this time it didn't work. I tried formatting the SSD and it just gave me an error saying windows couldn't install on a GPT disk. I went into bios, made sure the PC was booting from the UEFI DVD drive and it still kept giving me the same error.

So I then booted up my old HDD. I tried formatting my SSD and now I can't delete the partition!
This is what my disk set up looks like:


If I click "extend volume" on the "New Volume (G" disk, it says "there is not enough space on the disk(s) to complete this operation".
If I try to create a "new simple volume" on the "unallocated" partition, it says the same...

Have I destroyed my new SSD now?! I just want it to work like a new clean disk...

A:If I try to "extend volume" it gives "not enough space on the disk(s)"

Hiyya Tracing try doing it with Partition Wizard mate Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.
Brilliant tool if you can't do anything with the partition them just wipe the disk mate and start over with this SSD Alignment

1 more replies
Answer Match 79.5%

I'm using Windows XP SP2 Home Edition and am trying to access the C:\System Volume Information folder, but I keep getting an "Access is denied" message, even after following the below directions.

1. Click Start, click Run, type cmd, and then click OK.

2. Make sure that you are in the root folder of the partition for which you want to gain access to the System Volume Information folder. For example, to gain access the C:\System Volume Information folder, make sure that you are in the root folder of drive C (at a "C:\" prompt).

3. Type the following line, and then press ENTER:
cacls "driveletter:\System Volume Information" /E /G username:F
Make sure to type the quotation marks as indicated. This command adds the specified user to the folder with Full Control permissions.

4. Double-click the System Volume Information folder in the root folder to open it.

5. If you need to remove the permissions after troubleshooting, type the following line at a command prompt:
cacls "driveletter:\System Volume Information" /E /R username
This command removes all permissions for the specified user.

My problem may be with step #2, as I'm not sure what to do what it says in the last sentence. How do I get to a C:\ prompt?

Here is a screenshot of what the command prompt window looks like when I first open it.
 

A:Trouble Accessing The "C:\System Volume Information" Folder

16 more replies
Answer Match 79.5%

Windows 7 is installed on C: . I want to take D: out of the system, and have it completely empty.

I have two directories on D:, System Volume Information and $Recycle Bin.

I understand I can get rid of the $Recycle Bin, but I don't know about System Volume Information.

Can I simply delete it, or is it part of the Windows Installation, or just info about the D: drive that is disposable?

Thanks!

A:D: drive has "System Volume Information", can I delete or move?

If you're referring to the 100 MB + of space on the C: drive, that contains vital OS boot information and should never be removed.

For clarification, could you post a screen shot of your Disk Management window.

2 more replies
Answer Match 79.5%

When I attempt to open the C:\System Volume Information folder so I can view the contents of the _restore folder, I receive the message seen in this screenshot.

If I do a "search" for the _restore folder, nothing appears.

What gives?

I don't recall having this problem before the hard drive was replaced and Windows XP SP2 was reinstalled from scratch.

I know that System Restore is working because I've created several restore points before installing new or updated hardware drivers.

----------------------------------------------------------------
 

A:Problem Opening "System Volume Information" Folder

9 more replies
Answer Match 79.5%

My virus scanner detected a virus in the System Volume Information directory, the problem is this folder is unaccessable for some reason. It is a hidden folder but i cant find it and in safe mode i still cant access it. My virus cant get rid of it for this reason as well I am guessing. Please help me someone.

When i start my PC an error with a message such as this pops up: AVG has detected the virus worm/agobot in C:/System Volume Information/ etc. etc, the rest is a bunch of numbers then an exe. file.
 

A:How do i access "System Volume Information folder"? Virus in it.

Right click "My Computer" > select Properties > System Restore tab > tag the box to disable System Restore. Affirm the action and close the screen. Reboot for good measure.

You may then reenable System Restore if you like, the virus it had in its memory will be long gone now.

Regards.
 

3 more replies
Answer Match 79.5%

Hi all.

So i upgraded from xp to 7.So i am now on windows 7.The first thing i did is download and install Avira,I updated it and did a full system scan.It found around 20-30 viruses,trojans,malware,irc bots in "C:\System Volume Information\_restore{5E03FC9B-BBC4-4FA8-96F7-D40CC10DBA4A}\RP7"

So i let avira delete all the detected files in RP7 folder.I went to the folder and found like icons,.dll files,etc from xp..So i deleted every file in the RP7 folder..


Is it safe to delete the folder "System Volume Information" located in my C:\ driver?

Thank You.

A:Is it safe to delete the" System Volume Information" folder.

You are not addressing the root problem. The System Volume Information folder stores the restore points created by System Restore on enabled drives. These points let you take your system back to an earlier point of time, should it start misbehaving and you cannot rectify the problem directly. If the system is infected at the time a restore point is created there's a good chance it will exist within the restore point.

System Restore is an excellent tool and I would not suggest disabling it or deleting the SIV folder. What you can do is delete all existing restore points to avoid reinfection on running restore, then clean your system thoroughly, then create fresh restore points.

The best course of action is to prevent infection/malware in the first place. In combination with a good backup strategy System Restore is an excellent tool.

4 more replies
Answer Match 79.5%

I copied the "system volume information" folder from my C: drive to my external hard drive in order to back up the restore points. Now I want to delete the folder, but no matter what I do, I cannot delete it. I always get an error "an error occurred while applying security information to"..... usually F:\MediaID.bin.

I click 'continue', and then try to delete the folder or some files within it, and nothing happens.
I am an administrator
I am the owner
I have full access

A:No matter WHAT I DO I can't delete a "system volume information" folde

  
Quote: Originally Posted by peanutaxis


I am an administrator
I am the owner
I have full access




I am an administrator -- But you're not System
I am the owner -- No, System is
I have full access -- Apparently not



That's one of the folders with pretty much exclusive access only by the system for security and other reasons.

You could try taking ownership. Or is that what you did?

Why are you trying to do this?

If you want to keep using System Restore, it's best to leave it alone.

How would you intend to ever use the restore files you copied?

6 more replies
Answer Match 79.5%

Hello,

I just bought myself new HW and a new SSD for my computer, and I also installed a fresh Windows 7 on the new SSD. I put my old HDD with Vista on D: and copied a couple of documents over to "my documents" folder to my C: drive + a couple of other files.

I am now cleaning up my D: drive to get rid of all the Vista files which I don't need any more, and I have stumbled over "System volume information" folder. This folder was last modified at the date I installed Windows 7 (5 days ago). Can I just remove this folder without any repercussion?

A:"System volume information" folder on my old Vista installation

It's actually a part of System Restore; the tool that allows you to set points in time to roll back your computer. The System Volume Information folder is where OS stores these points and associated information that makes them accessible.
If you're not using System Restore feature, you can delete it. I recommend you to keep it untouched.
Fore more information, refer here:
Tips Fixes & FAQs
Take Care

6 more replies
Answer Match 79.5%

I have a SIMPLE and easy way to remove viruses from system restore without losing all your restore points.

In command prompt type:

cacls "c:\system volume information" /e /g "username":F

(username = your user name eg. Administrator)

it will say 'processed dir.....'

run the virus scanner again to remove the virus.

I do this in safe mode, in the administrator account so that my standard account can't access the system restore and screw something up.

Shaelesand.
 

A:Remove Viruses from XP Pro "System Volume Information" folder

That's a good suggestion for users running Windows XP Pro. Basically that command is granting authority to the "System Volume Information" folder to the user you specify on the command to get around the "Access Denied ...." error.

The other way to accomplish it is to disable "Simple File Sharing" under the Folder Options. Then right click on the "System Volume Information .." folder and select Properties. Then click on the "Security" which appears since you disabled "Simple File Sharing". At that point you can grant the user authority to the folder.

Anyway, thanks for the shortcut. It will come in handy in the future.
 

1 more replies
Answer Match 79.5%

I have a C: drive which I want to increase in size. Under disk management there is 20GB of "Free space" - (right next to the C: partition). But neither disk management or EASUES partition manager will allow the partition to use this space. How to I change "free space" to "unallocated" so that it can be used ?

A:Cannot extend volume (disk management) although "free space" exists

Can you post a snip showing what you have? An image makes it easier for us to help you. For example, you said that there was 20GB of free space next to your C: partition. What you didn't say was whether it was to the left or right of it.

7 more replies
Answer Match 79.2%

Hello,

Let start off saying I know what this folder is for (System Restore) and know how to typically get rid of the space it takes up (merely disable system restore). However, in this particular case, it's not working and need to figure out how to make Win 7 delete it.

In this particular situation this is an external hard drive that I hook up to other PCs quite often in transferring data and imaging PCs (I'm a PC tech). As such, the hard drive has accumulated quite a few restore points on it from these various systems. Disabling system restore from mine does not remove these other restore points.

Windows XP I remember would let me remove it if I took ownership of the files, Win 7 will not (although it does not kick back any error messages). So... how do I get rid of it? Or at the very least, the multiple restore points within?

Thank you.

Solved: See Schmik and alan10's posts on page 3, posts 22 and 24, respectively. Thank you both.

A:How to delete "System Volume Information" folder on Win 7

  
Quote: Originally Posted by FuryoftheStars


Hello,

Let start off saying I know what this folder is for (System Restore) and know how to typically get rid of the space it takes up (merely disable system restore). However, in this particular case, it's not working and need to figure out how to make Win 7 delete it.

In this particular situation this is an external hard drive that I hook up to other PCs quite often in transferring data and imaging PCs (I'm a PC tech). As such, the hard drive has accumulated quite a few restore points on it from these various systems. Disabling system restore from mine does not remove these other restore points.

Windows XP I remember would let me remove it if I took ownership of the files, Win 7 will not (although it does not kick back any error messages). So... how do I get rid of it? Or at the very least, the multiple restore points within?

Thank you.


You need to disable system restore on the external hard drive. To do this, go to start, then right click on computer, then click properties. In the top left, there will be an option that says system protection. Click on that.nAfter that it will show all of the drives amd you will see a "yes" or a "no." Find the external hard drive, and if it says yes, click on configure. You can now turn off system resotre for that drive.

9 more replies
Answer Match 79.2%

Hello,

I have windows 2003 server hosting many domains with HELM control panel.

My system is compromised and someone is uploading data without authorization in the following folder:

C:\System Volume Information\_restore

Hacker has created APPZ-iNDiSP & _ARCHIVE folders as under:
C:\System Volume Information\_restore\APPZ-iNDiSP
C:\System Volume Information\_restore \_ARCHIVE

Hacker is uploading cracked version of softwares in these folders. I wish to plug the compromise.

Please HELP!
Thanks a Million
Kash
 

More replies
Answer Match 79.2%

Hi. I'm trying to get rid of files and this one is the main one that I have found so far that is getting stuck and not being deleted. It says that "change.log" is being used by other users.

Occasionally as well a chinese website pops up for some reason.

Thanks

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 18:33:25, on 17/10/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16876)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Common Files\Symantec Shared\AppCore\AppSvc32.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Norton PC Checkup\executables\mrHealthy\MrHealthy.exe
C:\Program Files\NDAS\System\ndassvc.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\wanmpsvc.exe
C:\Program Files\HP\Digital Imaging\bin\hpqnrs08.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Real\RealPlayer\RealPlay.exe
C:\Program Files\Common Files\S... Read more

More replies
Answer Match 79.2%

hi guys,

Today I would like to do a dual boot on my laptop. Windows and ubuntu .. my laptop is a lenovo. I have a problem on my partition. I have 4 partitions on my hdd, C:, D:, E:, F:. and I want to move or maybe remove the system volume information folder on the "D:" and will also remove the "D:" and finally I have 3 partitions namely c, e, and f. so I can have a free space for ubuntu. it seems my laptop can not have more than 4 partitions.

BUT, i don't know how to do that?

it is screenshot






Thanks advance,
Wilman

A:how to move/delete "System Volume Information" [PLEASE]

Was the D partition on this Lenovo when you bought it new?

Or did you add the D partition yourself?

It is not flagged as active or boot or system, so I'm wondering about its purpose? It's not quite empty.

I notice you have an external drive marked as "active" and am wondering how that has happened. Is Ubuntu already on this drive?

Are you locked into the idea of Pixar and Dream Works being on their own partitions?

5 more replies
Answer Match 78.3%

I used to have a second "test" install of windows XP on my slave hard drive. I needed the space, and wasn't sure how to go about removing it without formatting and losing the other data I had stored on the drive so I just deleted the windows directory, and removed the OS listing from the boot file.

However I can find no way to remove the "system volume information" folder, as it won't let me have access. I have tried booting into a safe mode command prompt, and such, but so far no luck.

Is there any way to get rid of this folder or is a format the only solution?

Thanks!
 

A:Need to delete "system volume information"

8 more replies
Answer Match 78.3%

Hi all !

Yesterday i got like 15 messages from my anti-virus/spyware program that, in the messages is said that is was in my system files and it could't delete it. I have tried to get into the map that is named "system volume information" but i got "accses denied" ... And i downloaded a new anti virus thing that said it would take it away but when it was going to, the whole computer crashed because it tried to delete the files.

Please help me ! What should i do ?
P.S The program i downloaded was "spyware doctor"
 

A:Virus in "system volume information"

Hello and welcome.
This forum is for introductions only. A moderator will move this thread to the correct area. Please come back and tell us about yourself! Hope you get helped!
 

2 more replies
Answer Match 103.32%

I have a toshiba with a windows 7 64bit, and it's been acting really slow recently and freezing up on me so I thought there might be viruses that I needed to get rid of, so I restarted my computer so I could go in safe mode with networking to check if there really were. When I restarted my computer I momentarily forgot to press the f8 key and the windows starting screen with the logo showed up. Without thinking I turned off my computer since I didn't want to restart again (it took forever for the computer to do). Once I turned the laptop on again I ended up going to system repair. For some reason this did nothing to my computer. I left it on for hours and hours until I finally decided I wasn't going to get any results. I once again restarted the laptop but this time when I went to system repair I cancelled it and when into more options and tried doing a system restore which also didn't work and said a bunch of my files couldn't be read. When I looked back at the system repair log it said "system volume on disk is corrupt." I googled it trying to find something to help me, and every place said to run sfc scan, which I did on command prompt, which always gave me the reply "there's a system repair pending which requires reboot to complete" and since my computer can't reboot properly no matter what this is what it'll say. Is there some way to run this scan or another way to fix my computer without having to lose all my data? I have some really important files ... Read more

A:"system volume on disk is corrupt" and sfc scan not working

I suggest first before doing anymore repairs you need to make a backup of all your important data so as not to lose it.

A linux live cd choosing to run off the cd not install go to the windows installation and backup all your data to an ext hdd.

Then using startup repair option at F8 option choose choose the windows installation by highlightlng and choose next go to cmd prompt and type: chkdsk /r press enter

2 more replies
Answer Match 103.32%

Hello I am in a bit of jiffy here.

Today when I tried to start up my computer everything started out well, Bios started, checked to see what I have plugged in for CD and Hard-drive(so just normal stuff), but when It started up windows it automatically took me Startup Repair. This was unusual though as this has happened before I though it would run it's course and start up after not actually detecting any problems.

I checked back after 3 hours later to see it still trying to "Attempting Repairs"

So i restarted the computer and when the repair started again I clicked cancel and went into a few more options (open command, start from a different point in time, Windows memory Diagnostics, etc.) and ran the Windows memory diagnostics tool. After a few minutes it was done but didn't give me any information.

Computer restarted so I cancelled the scan again. This time I went to diagnostic and repair details. Every test says the same thing completed successfully. Error code = 0x0, and t the end it comes up with this Root cause found: System volume on disk is corrupt.


After It told me the root cause I did what most people do and went to see if I could find a fix
Trying sfc /scannow came up with "There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again.
trying chkdsk c: /f /r gave me a different error "Failed to transfer local logged messages to the event log status 50."

It also states "Wi... Read more

A:Root Cause Found "System volume on disk is corrupt"

Hi, and welcome to the forums.

Well, before anything else, you might boot your repair disk and copy/backup all your files to an external drive.

There are several posts in the forums that sound similar to yours, searching for "corrupt windows system". If you rebooted, not waiting for it to complete the repair process, I would restart that and give it all night as windows is not the speediest at checking obvious stuff (Repair Install).

9 more replies
Answer Match 102.48%

Hello, my system disk is an Intel X25-M G2 80Gb (74.4Gb) and I recently discovered that there is a rather huge discrepancy in used disk space.

According to disk properties I have used up ~73.7 of the 74.4Gb, but the actual files on the disk are only 51.7Gb if I show all hidden/system files, mark everything and check size and WinDirStat report the EXACT same thing.

I have no pagefile on my system disk, no hibernation file and no system restores (it's actually disabled).

So any ideas whatsoever what this could be? It's starting to become rather annoying to "lose" 25% of my system disk. I've run diagnostics and haven't been able to find anything, I've googled it extensively and found others with similar problems, but the only solutions I've found are pagefile, hibernation file, system restores and of course disk cleaning - all of which I have checked already.

A:Approx. 20Gb of system disk space "missing" - Intel X25-M G2

Hello Zeilon, and welcome to Seven Forums.

The tutorial below may be able to help you ID what may be using the SSD's space. Option 1 with WinDirStat is a good starting point.

Hard Disk Space - Free Up and Recover

Hope this helps,
Shawn

3 more replies
Answer Match 102.48%

Hello everyone,

I am currently a new registered user and was wondering if this was the correct place to post my problem. I have a issue with my Local Disk (C:/ Drive) and was wondering what was taking up so much space. I have a 1TB hardrive, currently on my Local Disk I have 136GB free of 454 GB. However, when I add up what I can find when opening the drive, it doesn't add up anywhere near the 317GB that it says has been used.

Now, I have currently installed...CCleaner, Eusing Regcleaner, AVG Free 8.0, and TreeSize, all of which I have run various times (still learning about TreeSize).

BEFORE I was getting scared because I had even less memory free (approx. 74.9GB of 454GB). But after running a Disk Cleanup...it knocked it down to it's current state. It still doesn't explain how I have so much memory used.

My only thought now is that there are extra copies of my folders and files. Or most likely this has something to do with Vista's "System Restore". I am not very adept at using this PC. Whatever advice you guys can give...try to dumb it down for me and tell me where to go (e.g. Control Panel>Systems>etc..)

And my System Specs are incomplete because I don't even know where to go to get all that information! So if you need to know something about my PC tell me where I might find it or just look at what I have for my System Spec.

Thank you very much, I'll be checking my post at least once a day so I'll try to respond quick if any of you pros have an idea... Read more

A:Local Disk/System Restore/"eating" up space

Hello Mike, and welcome to Vista Forums.

This tutorial will help you see how much disk space is being used by System Restore and how to adjust the MAX size it can use. With a 1TB drive, it will have a high MAX by default.

System Restore - disk space

Hope this helps,
Shawn

3 more replies
Answer Match 102.48%

Hi there,

I am facing a problem with the backup program of Windows 8. My computer (Asus with 250SSD) disk is new and I just installed my programs. Now I want to create a System Image using Windows. The image should be around 50go. Everything works fine until I get a message error saying my external disk does not have enough space, which is impossible since it is completely empty (500go).
Did anyone have ever meet that problem and/or have advices to help me? I would like to solve that and not be forced to used another way to backup.

Thank you,

Vari

A:Create system image failed - "not enough space on disk"

Is your second disc formatted NTFS?

7 more replies
Answer Match 102.06%

Upon starting my laptop today (my old computer died, and I bought a new laptop), I went to go somewhere for 20 minutes. When I came back, I found that my computer was not functioning properly; it was running a MS-DOS-esque program that was apparently scanning my files. In a few minutes, it was back to normal... or so I thought. I found that I received a stop error when I entered my account after the computer restarted. I rebooted my system and the computer ran Chkdisk, which concluded that the "system volume on disk is corrupt". All scans were successful, and I believed that the problem had been remedied. I was wrong; my system was still dysfunctional. I then ran Windows in Safe Mode, which is where I am right now.

How would I go about solving this problem and bringing my computer back to where it was before? Also, is there a possible way to reformat my hard drive without using an operating system installation CD?

A:"System volume on disk is corrupt"

Hi, while in safe mode open a command prompt and at the prompt type chkdsk /r press enter you will receive a message about the volume being in use and to schedule chkdsk to run at next boot select "Y" and type exit press enter. Reboot and let the full chkdsk run. This will repair and is at this stage the best option, post back to let us know how you get on.

13 more replies
Answer Match 101.64%

hi every body
My PC has lots of files called "Thumbs.db" & "System volume information" in all its drives.I cant delete these files and I think the cause of shutting my pc down automatically and showing blue screen is these files.the operating system is win xp/sp2.
I don't know what to do with these and what anti virus will delete them.please help me.
thanks
 

More replies
Answer Match 98.28%

Dear Experts,

I have created windows image on Drive F: but delete it after some time manually due to some space prob.
But while backup shows about 40 GB only few GB space got free after deletion. When i try to again take the the backup using windows 7 backup & restore option, its still shows 35 Gb of System Image in drive F: when i brows the Manage Disc Space option but i cant find it on the same drive. (Plz see attached pic)
Plz help me to locate this and delete the same.

Thanks

A:Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"

Hello sattyaji, and welcome to Seven Forums.

It may still be showing if the system image was created as part of a Windows backup. Using the tutorial below to reset Windows Backup should clear it for you, but you will need to set up your backup again afterwards.

Backup User and System Files - Reset to Default Configuration

Hope this helps,
Shawn

5 more replies
Answer Match 95.34%

When trying to view my disks in Computer Management>Disk Management, I get "Connecting to Virtual Disk Service" for several minutes, then "Loading disk configuration information" nearly forever. After about 20 minutes, some information appears, but I can't scroll the window to see all the data.

Also - I'm now having trouble creating and re-naming new folders in Win Explorer. It "feels" like it's related. Has something else got control of my drives? Any suggestions welcome.

A:Disk Management hangs at "Loading disk configuration information"

Same issue except no problem with renaming folders.

Following services are running:

Virtual Disk set to Manual
Remote Procedure Call (RPC)
Plug and Play

Logged in as administrator account. Drives check out OK with manufacturers diagnostic tools.

Running MMC and adding the Snap-in for Disk Management(Local) does not fix the issue. I'm guessing there's a problematic registry setting for a drive that use to exist or is now having an issue. Anyone have any other suggestions?

1 more replies
Answer Match 94.08%

I deleted a partition I had added previously for a Linux OS. After deleting it turned green as in "Free Space" I want that available space given back to C. I have included a screen shot of where I am. I don't know what to do next. The "Extend Volume" Option in C is not activated.

System info included below

Thank you.


OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name LOGOS-PC
System Manufacturer Hewlett-Packard
System Model HP G60 Notebook PC
System Type x64-based PC
Processor Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz, 2200 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Hewlett-Packard F.65, 12/15/2010
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name Logos-PC\Logos1
Time Zone Mountain Daylight Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.91 GB
Available Physical Memory 1.27 GB
Total Virtual Memory 7.81 GB
Available Virtual Memory 5.20 GB
Page File Space 3.91 GB
Page File C:\pagefile.sys

A:"Extend Volume" option on C greyed out. Free space available but how?

I`m fairly certain the entire space has to be deleted down to unallocated space, then you can extend C

I recommend making and using a Partition Wizard Boot CD to do all your partition management.

https://www.partitionwizard.com/part...otable-cd.html

1 more replies
Answer Match 90.72%

This is really bothering me. I disabled the System Restore function, but my SVI folder still contains over 10GB of data! And I find it hard to believe that the indexing service uses up this much space... so, what can I do to free up all this space?
 

A:System Volume Information folder taking up over 10GB of space

7 more replies
Answer Match 90.72%

I have a 232GB Hard Drive which is 97% full, I wanted to clear some stuff up so I downloaded a programme called WizTree, it told me that System Volume Information was taking up 74.4% of my hard drive space, I didn't want to start endlessly deleting files because they look pretty important, but they're taking up 168.1GB of space! Is there anyway I can decrease this number? What are these files even for?

A:System Volume Information - Taking up so much hard drive space?

Not sure what's implied here with ' System Volume Information '. It could be the shadowstorage where the restore points are stored. That could be easily fixed. Run the command below and post the result.

vssadmin list shadowstorage

8 more replies
Answer Match 89.88%

Hello all,
I am running vista home premium on my Dell XPS M1330 laptop.

Recently i restored vista as i had some problem. From then onwards my hard disk is enormously consuming. I performed disk cleanup several times. Only first time it will show lot of free space but after few hours i will show only a little hard disk space.
Any suggestions please......

Regards

A:Hard disk space consumed!!!!!!!

Hi -

The space consumption may very well be linked to system restore. Let's get a look at the restore points. Download the zip file and extract the batch script file -- SAVE to Desktop.

http://www.techsupportforum.com/atta..._jcgriff2_.zip

RIGHT-click on the desktop BAT file icon, select "Run as Administrator". A notepad will open with the results. Save it as a text file; zip it up and attach to your next post.

Was there any particular reason for re-installing Vista? What problems existed?

Regards. . .

jcgriff2

.

2 more replies
Answer Match 89.46%

Hi everyone,

Weird double whammy here: I ran Disk Defragmenter on my Windows XP Fujitsu N Series Laptop and it only runs for about a minute before it goes into "Paused for Shadow Volume Copy" and just sits there. Strike one. After scouring the Microsoft tech support site, it says I can disable Shadow Volumes through the Backup utility, but I can not find "Backup" anywhere on my Start>All Programs and couldn't find it by doing a full search of my C drive (though many things came up with "backup" in its name and I may just not know what I'm looking for). Strike 2.

Any solutions and recommendations out there? Thank you very much if so!

Sincerely,
Scott
 

A:Disk Defragmenter "Paused for Shadow Volume Copy"

its in ...start...all programs...accessories...system tools...back up...
have you tried defragging in safe mode...
 

3 more replies
Answer Match 89.46%

Hello,

I was just checking my new disk in Disk Management, and I was about to extend the volume I already had, when I miss clicked and deleted the whole volume. After some research it seems that I can recover it, because the data isn't lost yet, but I didn't find any solutions for win7 yet.
Source: How To Recover an Accidentally Deleted NTFS or FAT32 Dynamic Volume

I looked for Dskprobe.exe but it seems to not work in win7.

In the attachment you can see that I have three disks made into C: and X: I have already gotten that far in my reconstruction (as I read in the link)

But I don't know what to do know, can someone please help me? I kinda lost gigs of work and almost a TB of media

If you need more information, I'll be here updating this thread every minute

Maybe this one should have gone in the Software forum, please move it if so.
Looking forward for any support.

Kind Regards
Stig

A:So I just miss-clicked "Delete Volume" in Disk Management

I am now using EASEUS Recovery Wizard Pro to get my files back, and transfer them to another disk. It takes ten hours to recover the files, plus the time it takes to copy the files. It does not look like there's an easier way to do this. If nobody has any solutions?

5 more replies
Answer Match 89.46%

I've scoured the net to try to solve this. It's a very simple inquiry with a very definitive answer (i.e. this is solved when I can make extended/logical partitions in disk management).

When I select unallocated space in disk maagement All I get is "New Simple Volume" option.

how do I create an extended partition and then logicals on it? I can do this ever so easily in gparted and may resort to that but a bit infuriated at how clunky this seems in disk management.

A:Logical Partitioning in Disk Management Only "Simple Volume"???

Windows disk management is very basic in that you have to create three primary partitions first before creating the fourth, which will be an extended partition that will then let you create logical partitions within it.

You may want to create a Partition Wizard bootable disc, which is far more flexible than Windows 7's disk management utility.

Partition Wizard : Use the Bootable CD

1 more replies
Answer Match 89.46%

Newbie here. I have searched around for a while but have not found a post with my exact situation.

I just installed a new Seagate Momentus 500gb (7200rpm) SATA drive in my Lenovo X61 laptop and have been working on a installation of Windows7 Ultimate.

Not realizing this was an upgrade install disk, I tried to install Win7. I didn't know about the clean install method, so I started over with an installation of WinXP (slipstreamed to deal with the SATA drive).

Next, I ran the Custom Installation upgrade to Win7.

So far, it seems to be working ok.

However, the Local Drive is D: instead of C:. The System Reserved drive in labeled C:. Should I be concerned? Should/Can I change this?

Attached are screenshots of Disk Management and explorer window.

Thank you for any info.
-Nate

A:"System Reserved (C:)" and "Local Disk (D:)" ??

Try removing the System Reserved drive letter in Disk Management to see if Win7 claims C instead. It sometimes works.

There is no reason you can't operate with Win7 as D even though it is meant to always assume the C letter unless it's installer is run from another OS.

But if you do I would not allow a drive letter for SysReserved as programs can write to and corrupt it, especially the ability to make Win7 backup images.

Now that you know you can clean install Win7 without needing XP on the HD, I would strongly consider booting the installer to do a Custom install, choose Drive Options to Delete all partitions, Create new as you wish, then Format before installing to first partition after SysReserved it will create for you. The installer will see an OS at boot to allow use of Upgrade version key upfront during install.

Here are tips to get a perfect reinstall - use the ones which apply: Clean Reinstall steps

2 more replies
Answer Match 89.46%

When I start System Information (msinfo32.msc) it gives me, in the info panel, the following message:
Can't collect information
Cannot access the Windows Management Information software. Windows Mangement files might be moved or missing.

I checked if the WMI service is not disabled (it is automatically started, the default).

In Microsoft Mangement Console, under Services and Application, I have WMI Control. R-click, properties, and:
Failed to connect to <local computer>
because "Interface: class not registered"

What can i do?
 

A:System Information "can't collect information"

16 more replies
Answer Match 89.04%

Hello,I got 3 equal disks which were a dynamic Raid-5 before. I want to create a Dynamic Raid-5 again in Windows 7 but it's greyed out in the context menu. I can create a mirror, stripped or spanned volume. But no Raid-5 volume.All disks are dynamic disks already and unallocated.Anyone able to help?

A: "New RAID-5 Volume..." greyed out in Disk Management

Hi,
 
Sorry for late reply.
 
After confirming with our product team, it says that RAID-5 is only supported on computers running Windows 2000 Server, Windows 2000 Advanced Server, Windows 2000 Datacenter Server,  Windows Server 2003 or Windows Server 2008 Operating Systems. In Windows 7, only hardware-based RAID is supported.  Thus I recommend that you check your computer to see if it meets this requirement and visit the motherboard?s support web site to download the RAID drive controller drivers.
 
References:
 
http://technet.microsoft.com/en-us/library/cc786912(WS.10).aspx#BKMK_WINUI
 
Best Regards
Dale Qiao

17 more replies
Answer Match 89.04%

hey

ok so about 2 weeks ago ive been noticing that any cd i burn, half of the cd would be un readable . so for example: if i were to try burning a 21 sond cd i would only be able to listen to songs up to song 7 or so and the rest of the songs were showing up on my cd player screen but no sounds would follow...

so ive tried the usuall stuff here...first did a scan with adaware se and spybot and then i un installed then re installed my cd burners drivers and tested the burnign out on nero once more...no success at all......

so heres my nero log maybe u guys can find something. thanks.

Drive Information
-----------------
Drive : LITE-ON LTR-52327S
Type : CD-RW Recorder
Firmware Version : QS0C
Buffer Size : 2 MB
Date : ?
Serial Number : ?
Drive Letter : F:\
Location : 1:0
Mechanism : Tray
Read Speed : 12, 8, 4 X
Write Speed : 52, 48, 40, 32, 24, 16, 12, 8, 4 X

Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : No
Read DVD-RAM : No
Read DVD-R : No
Read DVD-RW : No
Read DVD+R : No
Read DVD+RW : No
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes

Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : No
Write DVD-RW : No
Write DVD+R : No
Write DVD+RW : No
Write DVD-RAM : No
Buffer Underrun Protection : No
Mount Rainier : Yes
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96
Disc Information (F:\)
-------------------
Type : - no disc inserted -
Capacity : 00:00.01 (0 MB)
Tracks : 0
Sessions : ... Read more

A:"D:\ access denied" and "no additional sense information (000000)" Burner Probs

11 more replies
Answer Match 89.04%

I bought a small SSD disk (25 GB) just for booting Windows 7.

Now I realize, after updating Windows constantly, the disk is almost full with the Windows folder beeing 20 GB big.

Is this size normal and is there a way out of it?

thanx

A:Windows updates have consumed my disk space

Hello Skylos,

I'm afraid that's going to be to small of a drive to run Windows 7 from. Personally, I wouldn't go with anything less than a 60 GB drive if you don't plan on installing to many programs.

You might see if using the tutorial below may be able to help free up some hard drive space for now. Hard Disk Space - Free Up and Recover

Hope this helps,
Shawn

3 more replies
Answer Match 89.04%

Hi,
I took a performance index from a 32-bit windows 7 Enterprise installed on a desktop PC. When I click the "View and print detailed performance and system information" link just below the performance index, it says "Could not display details page". I am running
as an administrator.
what the problem may be?
thanx

A:Could not display "View and print detailed performance and system information"

Hi,
try to update your drivers and Re-run the assessment again , also take  a look at this link it will help you:
http://www.sevenforums.com/performance-maintenance/145345-cannot-view-print-wei-need-some-help.htmlOussama Oueslati | System Engineer | vNext Consulting

7 more replies
Answer Match 89.04%

I am trying to remember the name of this program I used in tech school that would analyze a computer and then give you a detailed summery of all the hardware in the computer, all the way down to the kind of RAM you had in the machine. Any ideas?
 

A:Solved: Looking for a "system information" type utility to tell me about all my hardw

6 more replies
Answer Match 88.62%

I'm hoping this is a simple fix. I'm trying to fix my elderly uncle's Asus laptop. System Repair pops up and fails. I booted to command prompt and found out it may be hard disk space. 400+ GB Hard drive (only one drive) and there's only 1024kb Free. I'm thinking that could be the issue. Hardware was checked out at the computer store and is fine. But they were going to charge him $200 to fix this failure to boot up issue. I told him to let me try first.

Can I possible "compact" this drive from the command prompt screen?


Note: I have no other Win 7 systems, so can't create a disk, and I have no original disks.
Also, no restore point has ever been set, and there are no partitions on the drive.

A:"Startup repair" failing - hard disk space issue?

Normally, I'd tell you to download a program or two to examine what's using the space or to clean up unnecessary files.

But with only 1024 kb of space, you probably can't install anything.

So--try this:

Start button, search box, type in "disk cleanup" and then poke the disk cleanup listing that shows up.

Let it clean up the drive and report back with how much space you then have.

You'll see an option in disc cleanup where it asks if you want to clean up system files as well. Say yes.

It should calculate how much space it will recover.

Let it run to completion. Might take a few minutes.

Then check your recycle bin to see if it's empty.

Report back with available space.

9 more replies
Answer Match 88.62%

Big Kudos to anybody who can solve this one! Very little/nothing on Google or microsoft support site.
Here's the problem:

I'm helping a family member who has a new Dell PC with Windows XP Home, Outlook Express 6.
Every time they close Outlook Express, the following Warning pops up:
To free up disk space OE can compact messages. This may take a few minutes. There are 2 options - OK and Cancel.

Here is the rub: We've closed the warning, or we've clicked OK, or we've clicked cancel, we've checked the box that says don't ask me again....these warnings continue to come up next time (EVERY time) Outlook Express is closed.

This is a senior citizen who has, maybe, 20 email messages and no shortage of memory or disk space. I want to prevent this warning from coming up ever again. How do I do it? Is there some default I can change somewhere?
 

A:Solved: "Free Up Disk Space" OE warning ?? Stop the Madness!

6 more replies
Answer Match 88.62%

Hi everybody, I've made a lot of progress with this external drive, but I seem to be stuck now.

-------------------------------------------------

Unidentified problem with 3TB external drive (USB 3.0 enclosure) that the computer suddenly started treating as RAW. Spent the last two weeks running CHKDSK /r repeatedly. Slowly got through many hundreds of indexing errors. Now I get as far as "verifying security descriptors (stage 3 of 5)," but I seem to have hit a wall here...

CHKDSK won?t go any further because there is "Insufficient disk space to fix the security descriptors data stream."

Microsoft?s advice (Error Message:) is of no help to me. They say to ?delete some unneeded files from the disk and try again,? which doesn?t help me since I can?t get the drive to mount or stay mounted long enough to copy the files onto a different drive.

-------------------------------------------------

The drive behaves differently each times I power up its enclosure, but it is usually one of these things:

Drive doesn't mount.
Drive mounts after a few minutes. I see a generic "Local Disk L:" in Windows Explorer but, when I try to explore its folders, the computer takes about 15 minutes trying to read it (I can see the progress bar moving slowly across the top of the screen), and then says that "The parameter is incorrect." Drive disappears from Windows Explorer.
Drive mounts after a few minutes. I see the full Volume name that I originall... Read more

A:"Insufficient disk space to fix the security descriptors data stream."

Someone? Anyone?

8 more replies
Answer Match 88.62%

My wife has a two month old Lenovo ideapad with Windows 7. We are now getting alerts that the D partition is near full. Is this system taking multipul backups of the harddrive C and storing them all? What are my best options to have a safe backup, but not overloading the D partition? I do see in; Computer>System>Device Manager>Disk Drives>D Drive General tab that there are two options at the bottom.
option one, (not checked in my case) "Compress this drive to save disk space".
Option two, (checked) "Allow files on this drive to have contents indexed in addition to file properties"
Would selecting option one solve my problem? If this system is saving a snapshot of D over and over, it will only be a matter of time when option one will be overcome.
SO, I would think that there has to be a setting that will let partition D delete older backups...right?

Would it be a combination of selecting option one and changing a setting that would enable older backups to be automaticaly removed?

A:Action Center "Check backup disk space" alert

Welcome to the forum
If your D drive is made for backup's only, you can delete all files exept the newest one.
But it's advised to make backup's on an external USB drive and change the frequency of backup's to your files and olso for images to your OS.

4 more replies
Answer Match 88.62%

Hi - I keep getting the message that a backup failed due to less than 400 MB on the Windows disk. I have about 350 GB available on the disk!

Other backups have worked OK. I have seen a long thread on the Microsoft site with lots of people saying they have the same intermittent problem, but no solution. Anyone know what causes this?

I'm working Home Premium, and backup up to another hard disk on the same machine which also has lots of free space.

Thanks guys

Frances
 

A:Vista backup fails "not enough space on Windows disk"

Just a couple of simple questions, which you may have already covered.
How much space is on the C drive.(where Vista is installed)
On the 'Where do you want to save your backup' page, you are sure it is your second drive and not the 'Recovery' partition.
moper
 

2 more replies
Answer Match 88.62%

Hello. I am having trouble with a message in Action Center in Windows 8.1. It is saying "Check Backup Disk Space" and I cannot hide the message. I had Windows 7 File Recovery setup with Windows 8.1, but now after the upgrade, the message is "stuck." Can this be fixed? These two links explain it perfectly:

Windows 8.1 Update - Check backup disk space - Microsoft Community

Windows 8.1, can't remove "Check backup disk space" error in action center - Ars Technica OpenForum

Please help. Thanks.

A:"Check Backup Disk Space" Error Windows 8.1

See picture:

2 more replies
Answer Match 88.62%

I am attempting to transfer all of the files form an NTSF 250 GB external drive to an empty FAT32 250 GB internal drive via USB.

I keep getting an error message that says "Cannot copy (filename): There is not enough free disk space. Delete one or more files to free disk space, and then try again. To free space on the drive by deleting old or unnecessary files, click Disk Cleanup".

This is not true though, as the destination drive has more than enough space for the transfer.
 

A:False error - "not enough disk space" durring transfer

You cannot transfer all the files because many will be in use...

You will ned to make a drive image with a program like Ghost, or you can even use its drive copy feature.

It will be cake to copy an entire drive.
 

3 more replies
Answer Match 88.62%

I know it reduces the overall file size of the folder or file in question, but what method does it use to do this?

If you are not familiar with this phrase, it appear if you right-click on a file/folder in windows explorer and select "advanced". When selected the file/folder name will turn blue.

I need to know for some work, I have to compress some work and I could merely show myself using this feature, but explaining how it works would be better.

Thank you

A:[SOLVED] What does &quot;Compress Contents To Save Disk Space&quot; do?

This compression method does not reduce the "size" of a folder, it reduced the "size on disk". am I right in thinking that this compression method does not alter the code of any files, it merely stores the folder in a way which saves space on the disk?

6 more replies
Answer Match 88.62%

Hi there!
First of all thanks for the great toturial and the forum.

I tried to do the in-place upgrade from Windows 10 (build 1607) in order to "repair" my system (there are some quirks I want to get rid off) using a freshly created USB (as per description), but it fails with the message "make sure that there is enough disk space available in your PC" (rough translation from german; see attached screenshot) without any further information.

It then automatically cycles back to the question on how to install (i.e. with keeping data and apps or without) and then back into the above mentioned error message.


This is what I already tried or made sure of prerequisites needed:
I have made sure that there is definitely enough disk space available.My C: partition (where windows resides on) is 106 GB large and has currently over 58 GB of free space available.The system partition that is supposed to be 350 MB is still 350 MB (I read something about this potentially being reduced to 100 MB by other tools ...).I have deinstalled the Kaspersky anti virus tool (reinstalled it now after several tries with no success).I have disabled (i.e. fully decrypted) the disk encryption bitlocker on all disks.

My partitions (as seen from "Mini Tool Partition Wizard" and "Disk Manager"):
Do you have any ideas on what else could be wrong?
What intrigues me most is the fact that there is no further information in the error message on what or where is missing... Read more

A:In-Place Upgrade fails with message "not enough disk space"

Hi, Mark and welcome to Ten Forums.
Have you tried to mount the ISO in File Explore, instead if using an USB stick?
I just download the current ISO here: Windows 10 ISO , mount it in File Explorer and run the setup.exe.

22 more replies
Answer Match 88.62%

I got the warning msg that my drive "E" (system restore) was almost full. I did a disk cleanup, and a delete all restore points (including system...). After deleting approx 25 restore points and I've deleted down to 2 currently (new ones) and the only way I could get them to go was with CCleaner, My disk now shows only 4.2 free of the setting of 10.6GB. I cannot find what it taking up over 6GB on my recovery disk. What has it gone for....? I searched the internet several hours but can't find the answer. Any help appreciated...TJ

A:Unable to increase free space on Recovery Disk "E"

System Restore points take up space on C, rather than in E or a recovery partition in my experience. A recovery partition is normally put there by the manufacturer to allow you to restore to factory specifications if needed. I wouldn't ever deliberately put anything else on a recovery partition.

Who made this PC?

Can you post a picture of Windows Disk Management so we can see a visual display of your partitions?

3 more replies
Answer Match 88.62%

i heard this is way to much. what should i set it to?> or what else should i do?

thanks alot,

dustin

A:in my internet options, my "amount of disk space to use" is 8591 MB..?

It's down to preference really but you don't really need it to be set more than 200 mb's.

Hope that helps :)

1 more replies
Answer Match 88.62%

I know this question has been asked before as I've read about it all over the Internet. In order to get rid of the 'Low Disk Space' message it says to go to the registry and locate HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer, type a new value, etc. The only problem is I don't have an Explorer key. It ends at Policies.

I've tried everything. I've tried creating the key myself, and I've tried inserting the value into the policies folder. Nothing has worked. Can anyone help?
Thank you
Brad
 

A:Solved: Can't get rid of "Low Disk Space" message on my recovery drive

I guess no one else is having this problem. Do you think this is a problem with HP?
Brad
 

3 more replies
Answer Match 88.62%

When I couldn't delete the student office trial (which came installed with my HP laptop purchase) from "add/remove" due to having deleted first, a different but associated program (can't recall the name), I followed these tedious instructions found on this link - http://support.microsoft.com/kb/928218

The problem is...I noticed that instead of freeing up disk space, it took up more. How can I remove this trial completely to free up space?
 

A:Office Trial Removed From "Add/Remove" YET Ate Up Disk Space

ellaphant5 said:


due to having deleted first, a different but associated program (can't recall the nameClick to expand...

This can be a problem.

Also, I would say that fix from MS applies only to when the proper procedure for the uninstall of Office is followed but the end result is not what we expected so basically that didn't wasn't any help.

We need to know what other mystery "associated" program is.
 

1 more replies
Answer Match 88.62%

I use microsoft office 2007 My computer is dual core 2.53 Ghz 3 GB memory and I have 91.4 GB free disk space.
I am using Windows XP Professional Version 2002 Service Pack 2
I work a lot with word and did not have any problem. Now i have a problem with one particular file that I can not open and I always get the error "There is not enough memory or disk space to complete the operation. " When I try to open the file File size is not so big 652 KB Any ideas what I can do.

Thanks
Ofer
 

A:Solved: "There is not enough memory or disk space to complete the operation."

What type of file? Where did it come from?

If you do not have file endings showing, you should. Be sure that there is not a hidden "exe" or "com" at the end of that file.
 

3 more replies
Answer Match 88.62%

when i try to run word 2007 i get the following error message:
There is not enough memory or disk space to run word 12

I have 1Gb RAM with 550Mb free and 2Ghz Turion with 7Gb free space on the system partition and 15Gb free space in the other partition

can any tell me why its doing this?

thanks
 

A:OFFICE 2007 - "Not enough Memory or Disk Space to run word 12"..?

7 more replies
Answer Match 88.62%

Is it possible this can do any harm to my computer?

 

A:Quick question about the option "compress drive to save disk space"

I have never knwon it to, it doesn't delete any of your wanted files, only temporary junk!
David
 

3 more replies
Answer Match 88.62%

I first notice my notebook begins to have this issue when I tried to update my Windows. It returned me with error code "80070008", which says that my computer might have run out of memory, however, there are 200GB space available
in my C: drive, and I am only using 27~30% of my RAM out of 8GB.
I tried to perform DISM 'ScanHealth' and it returned me "Error: 8 - Not enough storage is available to process this command".
At first, I tried to ignore this issue as I thought it did not cause me any major trouble. But I was wrong. Several USB devices become unresponsive (yellow exclamation icon at Device Manager).
When I tried to manually install drivers, that's when I found out it was this STORAGE insufficiency again that cause me trouble:

"Windows found driver software for your device but encountered error while attempting to install it.  - Not enough storage is available to process this command".
Some of my programs also become incredibly laggy ever since this issue arises, yet I don't know where the problem lies. 
At Event Viewer... I noticed several error messages regarding
"Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights. - DETAIL: Not enough storage is available to process this command".
I also caught a glimpse of one error that I think stated more clearly:
"Application popup: Windows - Low On Registry Space: The system has reac... Read more

More replies
Answer Match 88.2%

I used Creative Lab's Wave Studio for years with a single problem.

I loaded it onto my sister's computor and the first time I tried to save a file, I got an error message saying:

"There is insufficient disk space to save (file name)."

She had several gigs of open space so I just chalked it up to something funky of her PC.

A few weeks later, my HD crashed, so I installed a new one and re-loaded my software. When I fired up my Wave Studio (version 4.02), I got the same message. Now I had roughly 75 GIGS of free space.

I'm not a newcomer to the world of software troubleshooting, but this one has me stumped.

Any help would go a long way to restoring my sanity.

Rich
 

More replies
Answer Match 88.2%

I had the same trouble. I had never backed up my hard drive before i had kind of run into it so i figure what the hay i'll try it. It told me to back it up on the D drive or disk. (since i didn't have a disk setting there i figured i would back it up on D drive) Well after a few min. it said i didn't have enough space. So i figured Oh well. I didn't need to back it up. Well EVERY TIME I Reboot the computer now it tells me I'm low on disk space on drive D.
Now everyone know D drive doesn't have alot of space it has your system on it. But why now is it checking it all the time. When it tells me to clean it , it shows me where and there isn't anything to clean. THIS IS ANNOYING! HOW DO I MAKE IT STOP?

There is no screen to give a shot of. It's a little icon on the task bar that pops up. Than when you click on it it says delete unused files. When you click on it it gives you the list of files you can delete. BUT there is only two things on it and both are all ready empty. One is recycle bin.

A:[SOLVED] How to stop "low disk space" messages

Hi Rachel3790 and welcome to TSF !

It's better to start your own thread so that we keep one thread for one user. Here's a link to the related thread you first posted into :
http://www.techsupportforum.com/f10/...ve-182725.html

Which program did you use to backup your system drive ?

If this is an HP computer have a look at the link advised by Mon in the other thread :
http://h10025.www1.hp.com/ewfrf/wc/g...reg_R1002_USEN

Else, when disk space is running low, Windows may advise you to run the disk cleanup utility which allows you to delete temporary files and empty the recycle bin, among other things. Since this doesn't help it means that your hard drive is simply filled with your own data and the data from the programs you installed on it. The backup you just created is probably also taking some space and if you don't need it you should just delete it.

What you need to do is copy some files on CD's or DVD's, on an external drive or to another computer. You should uninstall the programs you're not using anymore using add/remove programs and you can also delete some old documents of yours in your "my document" folder if you don't need them anymore.

Be careful not to delete any system file or folder. Files that are safe to move away are video and music files. These media files usually take plenty of space and you can free that space if you burn them on CD's or DVD's and delete them from your hard drive.

If you have no idea what's using up space o... Read more

4 more replies
Answer Match 88.2%

I receive daily a "Low Disk Space" error message which is incorrect and in my estimation fradulent. It goes on to give an alternative to rectify this situation by offering to "Speed up your computer and remove all viruses that are on your computer." Of course all of this is for a price. If you opt in and then change your mind before you totally commit they offer the same package for half price. I refuse to be "sucked in" by this fraudulent company.

I have gone to the internet to try and find out how I may get rid of this enemy. I have used Malwarebytes, Microsoft Security Essentials and Microsofts Security fix program all to no avail. I am at my 'wits end' trying to rid my computer of this plague. This is the url that the message comes through as. I cannot find out any source that will identify its origin: http://static.salesresourcepartners.com/g/?z=1&ilmernzkvtaztu=002618B38EDC0810&pu=cGlja3VwaG9ja2V5LmNvbQ==&s=iexplore&nm=ilmernzkvtaztu&t=aHR0cDovL3d3dy5waWNrdXBob2NrZXkuY29tL2ZvcnVtL3RvcGljLmFzcD9UT1BJQ19JRD0yODIzNw==&r=1

I need help.

Thanks,

Doug. Bell
 

A:Fake "Low Disk Space" error message

16 more replies
Answer Match 88.2%

Windows Update trying to install KB2976627, continually receiving error that I do not have enough disk space remaining to install the update. My OS Drive has 75 GB Remaining. Does anybody have any idea what causes this problem and how to remedy it?

A:Windows Update error, "not enough disk space..."

Time to do a Cleanup of your system:
Windows Update Cleanup in Windows 8

4 more replies
Answer Match 88.2%

There's not enough disk space on drive C where Nero 7.57 is installed; but, there is on drive E. I set Nero's cache folder to E:\NeroTemp and and Windows temp and tmp environment variable to E:\Temp where there is over 100 Gigs of free space and restarted the computer; but, there is no change with Nero's insufficien-disk-space error.

And, yes, I did create those folders for drive E.

What to do?
 

A:Nero aborts with "not enough disk space" error.

9 more replies
Answer Match 88.2%

Doing some maintainence on my computer, i am considering doing this option: "Compress drive to save disk space". There is also a "compress old files" to save space

are these both the same things? (same drive)
can i undo this options? im a big fan of reformatting to undo problems in the event its challenging to undo compress a file.

thanks
 

A:"Compress drive to save disk space"

6 more replies
Answer Match 88.2%

so. if I select everything on C:\ in windows explorer and hit properties, I am told the selected files consume 40.1 gigabytes of space. but if I hit properties on the drive itself I am informed that 97.3 gigabytes of space is in use, as of the last time I turned the machine off; the night before I watched the used space slowly increasing. while I'm moving to do what I can, I don't get internet access with it untill sometime monday(2/7/11), and MBAM (albeit with outdated definitions that came with the download) didn't find anything. the machine is running vista home premium (32bit) right now... gonna do what I can when I leave 'net access for the night updating defs/adding AVAST, but...

suggestions please. T_T

A:a virus, or...? disk space being consumed but not by files I can find.

don't really like to bump, but...

avast, with the most recent update package they offer, came up clean. when I installed AVAST, the HDD space used dropped to 86.4GB or so, but then moved up to 88, then down to 87.8... if directed to, I'll post pre- and post- AVAST scan HJT logs in the appropriate forum. I'd really like to let my mother's laptop rest seeing as it's doing the slowdeath thing.

2 more replies
Answer Match 87.36%

Hello people, I have an external 500 gigs drive with over 100 gigs free and a partition on a RAID 0 with 500 gigs free. I was trying to copy a folder with 25 gigs of data from my external hard drive to my 500 gigs partition, until at about copying 2.5 gigs, Windows shows up a warning saying that there is not enough disk space and that the file (was 500 Kb...) could not be copied. I skipped it and kept doing the same thing for every subsequent file... whats my computer's problem? I have WIndows Vista Home.
Thanks!
 

A:Solved: "There is not enough disk space" warning

16 more replies
Answer Match 87.36%

In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?

A:Changing the Disk Space Bar "Low Level"

  
Quote: Originally Posted by muzicman82


In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?


15Gb out of 1Tb would be considered low to me.

2 more replies
Answer Match 87.36%

I frequently get a notice that the disk space on my D drive is low and asking me if I want to clear up some space by using the cleaning utility that came with Windows XP Home Edition. This disk is my secondary drive and I know the space is low. Is there a way that I can get rid of this annoying notice that appears on my screen every so often? Thanks.
 

A:Solved: Notice of "Low Disk Space"

Hi referee07,

The "clean up unnecessary files" is safe to use. You can also add
choices in the list of what's to be deleted. You can also safely
remove all temporary files... Search for "*.tmp" (without quotes)
and delete those.

Also the trash bin standard setting is 10% of your drive. I would
adjust that downward to 2 % on all drives.

And, of course, you can delete some things that you really don't
need, or put them on a CD if you have a burner. Hope that helps.
 

2 more replies
Answer Match 87.36%

I have to harddrives, drive :C/ and drive D :/ drive c has the basic miniums and came with 16 gbs of space which is completely full with windows , then drive d has 136gbs and is 103gb of free space left
ANYTHING i try to download i try to make it go to Drive D but none the less i keep getting the error "not enough disk space"

this is a brand new system, that a friend whos good with computers built for me for my gaming needs, i have a

intel r core tom 2 quad cpu 6600 @ 2.40GHz 4 gb ram 64 bit operating system..

if you can help or need any info please let me know where i can find the info for you on the computer im pretty crappy with computers so i need all the help ican get

A:keep getting "not enough disk space" with 2 hard drives

anyone have any ideas? this is getting really frustrating....

2 more replies
Answer Match 87.36%

Hi

I have recurring problem, which I have noticed on PCs other than my own. The used space on my hard disk drive is approximately 5GB higher than the total of all the files on it. (It's always been around 5GB, every time I've seen it). The only thing I can do is to reformat the disk, and it will be fine for a few months, and then the same amount will "disappear" again. Disk cleanup, ccleaner, etc don't help, and it's not the recycle bin or temporary files.

It happens on my primary (Windows XP) partition, but not on the secondary partition, and last week it happened on my external hard disk after I deleted a large quantity of data.

I only have 60GB in total (30GB on the primary partition) in my laptop, and 40GB on the eternal drive, so its pretty annoying to lose 10GB. If it makes any difference, my external drive is a 2.5" laptop drive, a Hitachi Travelstar, NTFS formatted. Not sure what brand is in the laptop, but it's FAT32. But I've seen this happen on a friend's desktop too (again only on the primary partition).

Any ideas why this happens and if I can do anything about it that doesn't involve reformatting?

drawde
 

A:"Lost" hard disk space

Tell me if I'm teaching you to suck eggs, but what size blocks do you have on your drives, because without decent sub-block allocation, you'll often lose parts of blocks for files when they're smaller than the block size. Even with sub-block allocation, you'll still lose a bit because of the overheads, but 5GB seems a little steep for that size of disk.

If I compare my size of files, with size on disk, I'm losing ~1-2% of the disk. That's with the default block size of 4K. But it probably depends on the number of small file you have around the place.

After deleting a large number of files, it's probably worth-while running a disk cleaner to make all the blocks contiguous again, and that should give you back most of your space, but if they are really not getting re-allocated as free space, then I'll have to dig more.

Rich.
 

1 more replies
Answer Match 87.36%

I'm getting the Low Disk Space message in Windows XP. Well, DUH...I knew that I was running out of room, so I bought an external hard drive with more space than I'll ever fill. Like an idiot...when I got the external.....I just went to folders...sometimes programs and used "send to" the now G: drive. Yes, I know, that was STUPID! Many of the same files are duplicated, etc so that they were copied and sent....not actually MOVED. Some of my programs don't even work correctly anymore.

I know that I can do a system restore....but I'm almost afraid that it might crash my pc. What is the easiest way to fix this problem and put everything else, except my bare essentials, on the bigger drive?

Thanks!
 

A:The dreaded "Low Disk Space" message

bumping this hoping to get some help
 

3 more replies
Answer Match 87.36%

I am trying to copy a 9gig video file to my Seagate external USB 2 drive for back-up.
The drive has 140gig available, but I keep getting the "not enough free disk space" warning when I try to move it and it will not allow it to be copied.
What am I missing? is it a format thing?
 

A:Solved: "not enough free disk space"

6 more replies
Answer Match 87.36%

I am getting this window popping up every 2 or 3 minutes despite clicking on it and ticking the usual boxes to remove the unwanted files - 3 minutes later back pops the warning

its as if the pc doesnt know I'm actually doing it

I have followed this advice given to someone else on another site

"Insure the temp files in the hidden Local Settings folder are deleted.
Start>My Computer> Local Disk C> Computer user name> Then go to tools (at the top)> Folder Options>View and put a dot in show Hidden Files and Folders Click OK> Open the Local Setting Folder>Temp> Delete all the files you can in the temp folder.
3. Run Disk Clean from the Start>All Programs> Accessories> System Tools>Disk Clean Insure you remove all the compress old files.
4. Get Rid of the Restore points and Lesson the amount of disk space System Restore uses.
Right click on My Computer>Properties>System Restore and put a check in turn off system restore now click on the Settings Button Choose a setting of 1 - 5% click apply and OK
Go back and TURN ON system restore, insure the amount of disk space for system restore did not default to the Max amount."
but it hasn't made any difference whatsoever

could this be a virus? I ran malaware and then 'search and destroy' but that made no difference either

I have an Acer Aspire T1 2OE
 

A:incessant "low disk space" warnings

16 more replies
Answer Match 87.36%

Forgive me, but I?m new to the forum and relatively new to [rebuilding] computers (compared to some of you, I?m sure?) I do have a tech background.

Having said that, I had to do a re-install of XP (SP1) on a Dell Optiplex GX620 that I have. While at it, I upgraded the HD to 1.5TB (Seagate Barracuda)

The XP install went well. I did not have a restore disk for the drivers, so I went to Dell?s driver download website and downloaded the correct drivers for my model/service tag.

I put the drivers on a USB flash drive and moved them/loaded them onto the Dell. I installed the drivers in order and most installed fine. A few however, such as the Broadcom 57XX Gigabit Divers, are telling me that I am out of disk space. I get the error and a dialog box says that the volume on the C: drive is -650GB, and I have -655GB Available, with 2328KB Required and Differences of -650GB? I have no-idea what?s going on here, but I can?t seem to install the driver(s).

I did Disk Clean-up, defrag, chk disk, Ccleaner? blah, blah, blah? I am only using 1% of the available drive capacity.

Any ideas?

A:New O/S and driver install "Out of Disk Space"???

BUMP... Does anyone know whats going on with this? It's a simple re-install and driver install problem; not a virus or anything weird.

Someone has on this forum has HAD to have seen this before.

Please help.

Thanks.

5 more replies
Answer Match 87.36%

"Not enough memory to run microsoft excel. Please close other programs and try again"
So this morning I tried to open up excel, and this message comes up. Same happens for word.
Then I try and open it again and it wants to run in safe mode, and then the same problem happens.
Then I open it again and it says "Excel failed to launch in safe mode. Do you want to start Detect and Repair?"
So I run that and it says setup completed successfully. But I try and open it and I get the original "not enough memory" message, and it's just a big loop.

I have enough memory, 3GB and I'm using office 2007 on windows 7.
It's been running fine since this morning.
 

A:"There is not enough memory or disk space to run excel"

How about diskspace that's ' memory' too.
The environment settings voor %TEMP% could be invalid?
 

3 more replies
Answer Match 86.94%

Ok, I built a PC a month ago and everything seemed find no problems of any sort. The other night I defragmented my hard drive and shut it down and turned it on today to a memory test and the message "Disk Boot Failure, Insert system Disk and press enter"

The computer has access to the XP pro w/ sp2 disk only as a boot device but it will not recognize it now.

I have set Cd-rom as 1st for boot sequence then hard drive I have no floppy drive and the bios has been configured to know that.

I am not sure if this means anything but in the bios the IDE Channel 0 Master says none and when I try to turn on auto detection it wont detect a hard drive.

The HDD is fully connected and has not been touched since I installed it a month ago.

I have this awful feeling that I fried the HDD when I defragmented it last night.

Any help would be very much appreciated. But please be simple this is my first build and my knowledge at this sort of thing is very very sketchy at best.
 

A:Error message "Disk Boot Failure, Insert system Disk and press enter" on first build

The first thing to do would be to get a new data cable for the herd drive and see if that fixes it, they are nice and cheap nowadays.
 

4 more replies
Answer Match 86.94%

Ok first off I want to say I've searched and searched and searched to no avail in trying to find a solution to this I've come to the conclusion it's software and not hardware based. Let me start from the top.

I've had an older computer (HP Pavilion a408x) out of commission for a while due to a 'sploded psu. I finally get around to ordering one, install it and everything is good. I bring it back to my office and hook it up to the internet and as expected there's updates. So I up date it and after the updates are installed the computer restarts automatically (weird yes) and as it's coming back on it detects errors and runs CHKDSK. So I let it run and it gets to part 2 of 3. At this point in time my partner is really needing to print sometime and all computers print through this computer. So after about 45 minutes CHKDSK is still on part 2 at only 15%. So I'm like "screw it" and manually shut down and restart. It's at this point I get a "primary master hard disk failure" at the boot screen. Letting start up continue I get a "Stop : c000021 unknown hard error \systemroot \system 32 \ntdll.dll" At this point I realize something is delectably wrong.

Found this thread, which didn't help much. At some point the c000021 error stops and I start getting "disk boot failure insert system disk and press enter" and I found this thread, which didn't help much either. I have also been searching other sites as well.

Here's what I found ou... Read more

A:Hard Drive not found "disk boot failure insert system disk and press enter"

Anything would be super helpful, even if it's bad news. I just need to know if I can get this remedied or not.

Another thing I noticed is that the HDD activity light on the front of the computer does not blink or show any activity.

Thanks!

7 more replies
Answer Match 86.94%

Hello,
I just built this new computer (everything new) but when I start it up it gives me this message, and I cannot open my disc (probably not recognised?). Please help resolve this.
Btw. no operation system installed or so.

my computer:
CPU: intel i7 920
Motherboard: gigabyte GA-ex58-ud5
Sata-II hdd
+ cd writer is SATA as well

Could it be that I need to update my bios somehow? I highly doubt it's the hardware as it's all new
 

A:"disk boot failure, insert system disk and press enter" But CD-drive won't open

8 more replies
Answer Match 86.94%

I had a fresh install of 7 and everything was working fine.
All of a sudden it starts randomly freezing and programs start responding.
I got KERNAL_PAGING_ERROR BSODs etc. and got a new disk, thinking it was that.
After cloning the new disk which didn't work, and produced loads of errors on chkdsk, I decided to do a clean install of 7.

I still keep getting "Disk boot error, insert system disk and press enter", and when it does boot, it freezes all the time and every time I click the start button, it basically crashed and is messed up.

Tried new SATA cable and ports. Any ideas?
 

A:Windows 7 freezing, "Disk boot error, insert system disk and press enter"

BIOS settings or Motherboard issues?

Have you checked with the manufacturer website for the Motherboard that you have the Windows 7 drivers?

Is your Windows 7 DVD a retail copy...or the pre release BETA....or dodgy(in which case problems might lie there)
 

1 more replies
Answer Match 86.52%

just like the title says my HD crashed and i could not boot on the computer i put in a new HD and tried to boot it would not work. i would see the HP screen but then i would get the error. it is a 810a model and help would be extremely appreciated. and if you really know you can email me at <email removed>
 

A:Installed new HD now getting "disk boot error inset system disk & press enter"

14 more replies
Answer Match 86.52%

Hello everyone, been lurking for a while, but first time posting because I could use some help. I tried looking through other threads, but nothing seemed to help. I was downloading a game off of Steam, and my family computer just crashed. It apparently restarted itself, and presented that disk boot error message. Tried restarting again using ctrl+alt+del, and same situation occurs. I go into the BIOS screen, and try to use the auto detect to identify the drive, but it is not identified. All of the cables are working correctly, as I plugged a different drive into them and that drive booted fine. Btw, the hard drive is a western digital 5000AAKS.

I'm running an AMD Athlon 64 Processor 3800+, 2412 MHz, 2 gb of ram, Windows Vista Home Basic. Its a Compaq SR5110NX. I'm not overclocking it or anything, just downloading a game, and then this happened. Any help would be greatly appreciated.
 

A:Another "disk boot failure insert system disk and press enter" thread

7 more replies
Answer Match 86.52%

Hi there,

Well, the message I get it pronounced above in the title. I know a little bit about computers, but I don't know how to get into DOS, BIOS, etc when I don't have a start menu to do so. I read some other threads and they seemed to have useful information, but I would need further explanation. Also - I hooked my HD into another computer to see if it would work, it did, booted up, everything. Also, when I went into Boot Setup or something - blue screen and the only thing I could do when hooked into my computer - it doesn't show any options for booting - it says select from the list - but how do I do that when there's nothing in the list? Oh please do help me as this computer is my main source for writing.

Thanks,
Jimmy
 

A:Problem: "Disk Boot Failurs, Insert System Disk and Press Enter"

If you're running a HP what it's asking for is your System Restore Disk. Meaning the HP OS that came with your system. Finding Bios in HP are generally simultaneously with Start button on casing F1 or F11. If neither key works then try F2 and or the Delete button. Making sure each key is pushed as you boot up.
Once your in Bios use the arrow keys to scroll up and down your bios - the enter key once on the various listing in menu until you find your boot sequence listings. In general plus and minus are used to change the sequence. CDrom HD and floppy is the correct setting. But with your Restore Disk from HP it might not even require all that.
Pop it is and Boot up and see if it works. Then try the Bios sequence if you can get there, the F10 to save and enter making sure your CD with the OS is in your CDRom when you do.
Let us know as things go...Jazz
Sounds like you've either lost your OS or you've lost your HD.
 

2 more replies
Answer Match 86.52%

I am a new user of Vista Home Premium.  I just purchased an HP Pavilion m8200n desktop.
 
Periodically, upon startup, my disk drive gets beat to death.  When disk activity finally ceases, I find a large file in "C:\System Volume Information\".  The latest instance (just a few minutes ago) was 4GB in size.
 
From searching the internet, I have found others experience the same thing, but so far I haven't seen a cause identified.  Some have suggested turning of the indexing service: Windows Search.  I did.  I still experience the problem.
 
Any help would be appreciated, either an outright identification of the problem or suggestions on how to isolate what is causing it.
 
Thanks,
 
John

A:High disk activity (System Volume Information)

I have finally gotten around to doing some further research into this.  As PanThe1st states, the high disk activity (in my case) is related to the Restore Point creation.  Apparently there are a number of ways that Restore Points can be created. 
 
The most annoying one (the one beating my hard drive to death on a daily basis) is the System Checkpoint Restore Point.  Creation of the System Checkpoint Restore Point is controlled by a scheduled task: SystemRestore/SR.  Disabling the task resolved the problem for me.
 
Restore Points are still created automatically when certain activities like Windows Update are performed.  I don't mind those since I would create one manually anyway.
 
While I was in the Task Scheduler, I also disabled the Defrag/ScheduledDefrag task.

19 more replies
Answer Match 86.52%

I am running Windows 7 SP1 x64 (all latest updates auto apllied) and have recently moved to a EFI RAID0, RAID1, RAID5 system based, i.e All virtual volumes are initialised as GPT

On all volumes there is the standard 128MB partition (in the first sectors of volume) for the GPT header however; on the system volume, as the very last sectors, there is also a 105MB partition called "NO NAME" with a file system of "(OEM Service Volume)", what is this partition, how did it get there and can I delete it?

I used Intel Rapid STorage Technology to create the volume and Win7 Disk Manager to create the partitions and initialise the volumes

Any help for this reasonably computer literate amateur would be most apreciated

A:105MB partition "NO NAME" File System (OEM Service Volume) - whats it?

To give us a better look at the partition, search Disk Management in the Start Menu search and take a screenshot of what you see.

8 more replies
Answer Match 86.52%

I recently bought and installed Windows 7 Home Premium OEM onto my HP G42 (which is now 2.5 years old). I had Win 7 home Premium on it when I bought it, but the hard drive broke and I ended up getting a new drive (Seagate Momentus 7200 750 GB 7200RPM SATA 3Gb/s 16 MB Cache). I installed it onto there, and it seemed to be working fine for a few start ups. Then when I tried doing an update, I got blue screened the when rebooting, and it wouldn't let me back in.

From there, I decided to completely re-install Win 7 (I really had nothing of value on there), and that worked longer. It still had trouble doing an update, but after trying it again, it worked fine. It was a few days ago that it began giving me blue screens telling me a "critical system process has stopped working or terminated". Now, when I try booting to it, it will get to the start up screen with the animation, then it'll reboot after a minute and tell me it had trouble booting.

I ran start up repair, and it told me that the root cause was that the system volume was corrupt. I'm not really sure of what I can do now. Is there any way to fix this problem or to prevent it from happening in the future?

Side note: I don't know if any of you are proficient in the Ubuntu system (I dual-boot with ubuntu 13.04), but I tried accessing the Win 7 partition from there and it gave me this message (see attachment):

A:Windows 7 Start Up Repair Say's "System Volume Is Corrupt"

Okay, so I ran
Code:
chkdsk
via the repair disk, and it gave me this. Also, it said my system was in D:, which is odd because it should be in C:

9 more replies
Answer Match 86.1%

I think I've successfully installed truecrypt on my back up media HDD. I chose the option to make an Outer volume & also a Hidden volume.

Apparently both were created successfully, but I can't seem to locate the Hidden volume to add files to it? I've entered both passwords correctly & I can see the main Outer volume when the disk is mounted, but I don't see where the hidden volume is or how to create a new folder within the hidden volume?

A:TrueCrypt: I see the "Outer" volume, but where is the "Hidden" volume?

Don't mount the outer volume. Enter your password for the inner volume only.

-fm

3 more replies
Answer Match 86.1%

Disk Boot Failure. Insert System Disk And Press Enter

Hi i have a self built Quad Phenom 9850 XP Home ed PC that wont boot, i will say now i am very much a newbie to this so sorry in advance.

When i turn it on there is a very long wait at the set-up screen (an s-series gigabyte M750SLI-DS4 board ) and when it gets to boot screen it builds the DMI pool, tell me there is a data change and to update new data to DMI! and then goes to boot, only giving me this instead "DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER"

I have not yet managed to get the computer working, the thing that gets to me the most is that less than 12 hours ago i was sat on the computer with it working fine and no errors..

AMD Phenom 9850 2.5GHZ
Gigabyte S-series M750SLI-DS4 board
4 GB RAM
Seagate 1TB HARD DRIVE.

There is alot to loose on this computer so i am very much hoping this wont be the case, Thank you in advance.

James
 

A:Disk Boot Failure. "Insert System Disk And Press Enter"

6 more replies
Answer Match 86.1%

Pretty much what happened is that my powersupply got messed up one day and just turned off my computer and I couldn't boot it back up. I ordered a new PSU and I installed it but now when I boot my computer I'm getting "Disk boot failure, insert system disk and press enter". I've tried putting in the installation disc and using the recovery options but my OS isn't listed/found and if I click load drivers I can clearly see both of my hard drives. I have already checked boot options as well. I was also using GRUB before this all happened as well because I installed ubuntu as a dualboot. Any help would be greatly appreciated

A:"Disk boot failure, insert system disk and press enter"

Boot the free PW bootable disc - ( make sure NUM LOCK is on when it asks about screen resolution, then press 1, then Enter)

See what it says.

Free Download Partition Wizard

I assume both HD's are recognized by BIOS?

9 more replies
Answer Match 86.1%

New build computer, spec is as follows;

Biostar GF 7050-M2 Motherboard
AMD Athlon 64 4400 Processor
4 GB RAM
1 IDE 250GB Maxtor HD
1 IDE 200GB Maxtor HD
1 SATA Samsung 20x Dual Layer DVD-RW

Now I have assembled everything to the best of my knowledge correctly, I can boot the computer to BIOS without any problm whatsoever.

The problem is when I either try to load the motherboard driver disc, or my Windows XP disc I get this message;

"Disk boot failure, Insert system disk and press enter",
I have tried setting my disc drive to first boot device, I have even unplugged my two HDs as well, but to no avail.

My last hope is my USB flash drive, onto which I have copied the software from my motherboard driver disc.

Dores anyone have any suggestions as to how I fix this?, I will be very grateful to anyon that can give me some form of help,

thanks.
 

A:"Disk boot failure, Insert system disk and press enter"

Is there an OS already installed on the drive you are trying to boot from?
 

3 more replies
Answer Match 86.1%

System disk needed to access IBM 486 SLC2-V1/387;
66 mhz cpu clock; 640k base memory;7296k extended
memory; 5.25 & 3.5 disk system.
 

A:"Disk boot failure. Insert system disk and press enter."

Welcome to TSG

Which version of Windows are you using (win95)? Always make sure there is no floppy accidently left in the drive. Did this message just start one day or did it begin after some problem you had?
 

2 more replies