Tech Problem Aggregator

"Failed to open empty document" & "Parser" error messages

Q: "Failed to open empty document" & "Parser" error messages

I just resolved an issue I had with the wireless connectivity of my Acer notebook computer and now I am getting strange error messages. When I try (not every instance) to open device manager I will get the message "Failed to open empty document." From there I will occasionally get "Parser" messages that say "Value creation failed at line 843" or "line 422." I read what I could find about these messages and it points to MMC as the cause. How do I go about fixing this annoying problem if anyone knows?

More replies
Answer Match 131.1%

I use Windows XP. I installed and ran the Avast grime fighter and then found two of my programs - one for tax preparation and one for backing up to an external hard drive - won't "open". Instead, I get the error message "failed to create empty document". I uninstalled the programs then reinstalled them, but no change - I still get the message. I saw, by googling the message, that it may have something to do with a windows registry file, but I really don't understand what that is or how to get to it or how to fix it. I contacted the Avast folks and they said they could put me in touch with their microsoft folks for $180! I am at a loss as to what I should do. Please can anyone help me figure out what to do to get these programs to run? I really need the tax program especially. Thank you.

This is the text from running the TSG SysInfo utility:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz, x86 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3036 Mb
Graphics Card: Intel(R) G45/G43 Express Chipset, 1024 Mb
Hard Drives: C: Total - 476899 MB, Free - 426176 MB;
Motherboard: Dell Inc., 0P301D
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled
 

A:Solved: "failed to create empty document" error message

7 more replies
Answer Match 122.1%

I have a home network of five computers where one acts as a common computer ("server") where most data from the other four computers is stored (music, pictures, word processing, movies, etc). All five are running XP Pro SP2.

The "server" had two 80GB hard drives, but SMART was indicating that one was failing, so I replaced it with a 200GB drive. Now, every computer in the house can access the 80GB drive and all of its files but none of the computers in the house (except the "server") can access the new hard drive. I have the file sharing set to full access, and I can view the file folders that are on the drive from the networked computers, they are all listed. But when I click on a folder, I get "Access is Denied." When I mouse over a folder, it reads, "Folder is Empty"

But the folder isn't empty though when accessed from the local computer, only when trying to access it over the network.

I have turned off the Windows Firewall, turned it on again, off again, etc, no change. I have Zone Alarm on all the computers, turned it off, still no change.

Any ideas??? I have over 500 CDs on that harddrive, and I want to listen to music from my other comuters! I'm going nuts here.
 

A:"Access Denied", "Folder Empty" messages

There are two ways that might work.

1. From a computer other than the server right-click "My Computer" and choose "Map Network Drive". Where is says "Folder" type "\\<ip address>\C$" if you want to share the C partition of that drive (don't type the quotes).
2.
Go to My Computer and and click on the Tools Menu and then Folder Options.

Click the view tab.
Scroll all the way down until you see "Use simple file sharing (Recommended)" and uncheck it.
Click OK.

Now right-click the drive you want to share and choose "Sharing and Security".
Click the security tab.
Click "add" and add "Everyone".
Give "Everyone" the rights you want them to have "Read only" or whatever you want.
 

2 more replies
Answer Match 122.1%

Every time I open wordpad, or an RTF file (associated with WordPad), an error message comes up saying "Failed to Create Empty Document".

I'm running on XP, and I don't have my XP disk anymore, if that's needed or not..
 

A:Wordpad "Failed to Create Empty Document"

16 more replies
Answer Match 121.5%

I am receiving these 2 error messages (see below). Message #1 pops up first and then is followed by Message #2

Message #1:

"hpqthb08.exe-strong name Validation Failed which says, (Strong name validation failed for assembly C:\Program Files\HP\digital imaging\bin\hpqthb08.exe The file may have been tampered with or it was partially signed but not fully signed with correct private key )"

Followed by Message #2:

hpqth08.exe Common Language runtime Debugging Services. Click OK to Terminate or Cancel to Debug

HELP!
 

A:ERROR MESSAGES: ""hpqthb08.exe-strong name Validation Failed..."

Closing duplicate to: http://forums.techguy.org/windows-nt-2000-xp/545998-error-messages-hpqthb08-exe-strong.html
 

1 more replies
Answer Match 121.5%

I am receiving these 2 error messages (see below). Message #1 pops up first and then is followed by Message #2

Message #1:

"hpqthb08.exe-strong name Validation Failed which says, (Strong name validation failed for assembly C:\Program Files\HP\digital imaging\bin\hpqthb08.exe The file may have been tampered with or it was partially signed but not fully signed with correct private key )"

Followed by Message #2:

hpqth08.exe Common Language runtime Debugging Services. Click OK to Terminate or Cancel to Debug

HELP!
 

More replies
Answer Match 120%

Using Word 2007, I am unable to pin the "New" and "Open" Word Document to the Start Menu. I was able to do this in XP and Vista. I go to "All Programs" and can load Word but cannot find the options new/open. In Word I go to "Word Options" and it is not listed there either. Thanks.

A:Pinning "New" and "Open" Word document to start menu

  
Quote: Originally Posted by ADKR


Using Word 2007, I am unable to pin the "New" and "Open" Word Document to the Start Menu. I was able to do this in XP and Vista. I go to "All Programs" and can load Word but cannot find the options new/open. In Word I go to "Word Options" and it is not listed there either. Thanks.


ADKR,
I note that you have posted this question in Microsoft's Discussion Groups - Windows 7 - Word 2007 in Word General Questions.
Some reasonable replies were given to you that you didn't respond to. Did you actually try them?


This Tutorial written by our Brink would seem to be a reasonable alternative for you to use.
Quick Launch - Enable or Disable

1 more replies
Answer Match 118.2%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Answer Match 117.3%

Wanted to resurrect an older thread, but its closed :
http://forums.techguy.org/windows-xp/652638-error-moving-file-folder-directory.html

Please read completely before responding.
I am a 30 year IT pro, most of it as a programmer. I am the geek in charge of a tech non profit org in Hawaii. www.HawaiianHope.org
so yea.. i have at least half a clue.

Here is the deal.
In doing drive copies, data recoveries, etc... when we are moving a mass amount of data from one drive to another we run into this problem a lot.
"Error moving file or folder" -- "directory is not empty"
If you restart the move, it will continue on and keep going, restart enough times and eventually it will move all directories.

I think its a programming issue with windows and wonder if anyone has a work around ?

I have a suspicion that the copy process is getting out of sequence. That it is trying to move a folder before it actually emptied it. Possibilities are :
1) windows forgot its place in moving through and navigating numerous sub directories and it is having a problem with “recursive calls.”
2) Computers with hyper threading or dual core processors are spawning the movement of files across multiple processes, and some are getting ahead of the other.
3) It did actually move the file, but the cache or something in memory has not updated, or the full data write has not completed yet before it tried to move the directory. (delayed write)
Yes, you can copy and then delete the old... Read more

A:"Error moving file or folder" -- "directory is not empty"

This is a known issue. It is by design.

As you may know, moving is in its essence an unsafe process. It would be better to use the actual sequence of copy and then delete.
 

3 more replies
Answer Match 116.7%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Answer Match 115.8%

Hope this query is in the right section -tried to use my LDS 1881 England Census CDs last night - but having problems with the Viewer.

I have V4 which up to now has worked perfectly - tried to re-install it
and I keep getting "Failed to extract file "Dll_ini" from binary table"
error message.

BUT no problems on my laptap which has the Viewer installed from the
same CD.

Have had a few problems with computer of late - it was in the workshop
3 weeks ago because of some corrupt Windows files - could that be the
problem?

Grateful for any advice, suggestions as to what to do!
 

More replies
Answer Match 114.6%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Answer Match 114%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 113.4%

"401 Authorization" and "Protected Object" Error Messages
Could some please explain the correct sequence or syntax of the http entries in the Internet Explorer’s browser address line to invoke the name and password entry box for a D-Link Camera, when accessing it remotely?

I have a dynamic host, which has an address that is entered in the browser's open box, in the following format:
http://servername.dynamichostnameortnumber. The port numbers are the ports assigned to the two cameras. The server name is the same server name that is assigned to the router and the DYNdns host. The dynamic host name is set up with DYNdns.org and has been tested using their tools and is reported as working.

I have tried the remote (internet) access on computers running both Windows XP home and professional, service pack 3.

The cameras are DCS-6620G 802g Wireless cams. Have configured cameras. If I am on my wireless intranet, I can access the cameras by either typing in their local IPs into the open box on the File Menu of Windows Internet Explorer or by using the IP Surveillance Software, no problem, so far. Each camera has an internal static IP, and each has been assigned its own HTTP port number which has been forwarded to the respective static IP in the Linksys WRT54G router.

Each Camera has an administrator name and password that has been saved. When accessing on my intranet, either through IE or the Surveillance Software, there is a drop down box that opens to... Read more

A:"401 Unauthorized" and "Protected Object" Error Messages

Please don't post duplicate threads. If your thread is in an inappropriate forum, please report it and a moderator will move it.

Continue the problem resolution here: http://forums.techguy.org/networking/865180-401-authorization-protected-object-error.html
 

1 more replies
Answer Match 113.4%

Could some please explain the correct sequence or syntax of the http entries in the Internet Explorer’s browser address line to invoke the name and password entry box for a D-Link Camera, when accessing it remotely?

I have a dynamic host, which has an address that is entered in the browser's open box, in the following format:
http://servername.dynamichostnameortnumber. The port numbers are the ports assigned to the two cameras. The server name is the same server name that is assigned to the router and the DYNdns host. The dynamic host name is set up with DYNdns.org and has been tested using their tools and is reported as working.

I have tried the remote (internet) access on computers running both Windows XP home and professional, service pack 3.

The cameras are DCS-6620G 802g Wireless cams. Have configured cameras. If I am on my wireless intranet, I can access the cameras by either typing in their local IPs into the open box on the File Menu of Windows Internet Explorer or by using the IP Surveillance Software, no problem, so far. Each camera has an internal static IP, and each has been assigned its own HTTP port number which has been forwarded to the respective static IP in the Linksys WRT54G router.

Each Camera has an administrator name and password that has been saved. When accessing on my intranet, either through IE or the Surveillance Software, there is a drop down box that opens to input the name and password. This works fine on the intranet.

The problem is ... Read more

More replies
Answer Match 113.4%

Could some please explain the correct sequence or syntax of the http entries in the Internet Explorer’s browser address line to invoke the name and password entry box for a D-Link Camera, when accessing it remotely?

I have a dynamic host, which has an address that is entered in the browser's open box, in the following format:
http://servername.dynamichostnameortnumber. The port numbers are the ports assigned to the two cameras. The server name is the same server name that is assigned to the router and the DYNdns host. The dynamic host name is set up with DYNdns.org and has been tested using their tools and is reported as working.

I have tried the remote (internet) access on computers running both Windows XP home and professional, service pack 3.

The cameras are DCS-6620G 802g Wireless cams. Have configured cameras. If I am on my wireless intranet, I can access the cameras by either typing in their local IPs into the open box on the File Menu of Windows Internet Explorer or by using the IP Surveillance Software, no problem, so far. Each camera has an internal static IP, and each has been assigned its own HTTP port number which has been forwarded to the respective static IP in the Linksys WRT54G router.

Each Camera has an administrator name and password that has been saved. When accessing on my intranet, either through IE or the Surveillance Software, there is a drop down box that opens to input the name and password. This works fine on the intranet.

The problem is ... Read more

A:"401 Unauthorized" and "Protected Object" Error Messages

Please don't post duplicate threads. If your thread is in an inappropriate forum, please report it and a moderator will move it.

Continue the problem resolution here: http://forums.techguy.org/networking/865180-401-authorization-protected-object-error.html
 

1 more replies
Answer Match 112.8%

I cannot open User Accounts in Control Panel, I keep getting ...

Microsoft (R) HTML Application host has encountered a problem and needs to close.

Anyone with a fix? . My appreciations in advance!
 

A:"User Accounts" in Control panel wont Open-Error is "Html application Host Error"

Do you have a recovery restore install disc or partition?
You can try doing a repair or system file check...
Scan For Missing/Corrupt System Files...

Windows XP comes with a wonderful tool called System File Checker (SFC)
Itscans and verifies the versions of all protected system files after you restart your computer...
To Do This:
Click Start menu, and then click the Run icon.
In the small box that Opens, type the three letters: cmd then click the OK button.
In the command prompt window that just opened (a black background and white text), type the following command:
SFC /scannow
And then click OK
You must be logged on as a member of the Administrators group to run SFC..
You will need your Windows XP CD during this procedure if SFC needs to get an original file. Please remember that Windows XP can have multiple instances of a .DLL file and remember which version is for which program.
Notes....
I have been asked if it is possible to have a "progress meter" show when SFC runs... This is the registry hack you need. PLEASE do not go messing with your registry if you do NOT know what you are doing!
System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
Value Name: SFCShowProgress
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = disabled, 1 = enabled)
 

1 more replies
Answer Match 112.8%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Answer Match 112.5%

Windows XP SP2

Ok, I tried some things in other threads but to no avail. But some threads are having my same problems. First this about:blank crap is always my home page even if I change it, as well as these porn links in my favorites list. I've run scans with 5 different virus/ adware scan programs but it doesn't fix it. However, it got even worse-- I can no longer open things like My Computer, My Documents or even Control Panel to try and uninstall software. When I try to open any folder my computer freezes temp. and I get the following message: "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience."

PLEASE Somebody help me. I have hijack this, if that helps. AHHHHHHHHHHH!!!!!!
 

A:Solved: I can't open anything "Dr. wtsn error" & I can't remove "blank: about" adware.

14 more replies
Answer Match 111.3%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

A:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

1 more replies
Answer Match 111.3%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

A:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Answer Match 110.7%

Hello,

I'm hoping someone can help me. I'm using Outlook 2003. I'm designing a new Contacts screen, which better suits the needs of my business.

I have been able to figure out how to everything except for this:

How to I design the "date" and "dollar amount" field values to default to blank/empty instead of defaulting to the word "None" in the case of the "date" field and "$0.00" in the case of the "dollar amount" field?

Any help or direction would be greatly appreciated!
 

More replies
Answer Match 110.4%

Hello,
I am getting the following error when moving files on the same drive or from one to another:

"Error Moving File or Folder
Cannot remove folder (insert folder name here): The directory is not empty."

This is fairly common (once or twice a month) and it occurs usually with folders containing many subfolders when being moved by explorer gui "Move the selected items", or ctrl-x, ctrl-v . Repeated attempts through the same process seems to move the folders, but the errors increase as the concentration of stubborn folders increases.

There are no event viewer logs corresponding to these errors. (eventvwr.msc: system, or application)

I would have thought this would be a common problem, but extensive searches came up with nothing... so either it is rare, untroubling to others, extremely easy to fix, or my search queries suck. =)
I am going to run Checkdisk to make sure all is well there, and I will repost the likely failure.
 

A:"Error moving file or folder" "directory is not empty" one file left

Occasionally when I am deleting a file, it is difficult, I have to go through process explorer, search for the thread that is strangely(?) associated with that file in explorer (no reasonable dependencies could be linked, nor is the file being viewed), and kill the thread before deletion.

any thoughts?

Thanks =)
-J
 

3 more replies
Answer Match 108%

I'm getting this error message on 90% of programs I try to open. But if I keep trying it will eventually open. It doesn't happen on chrome/firefox, thankfully.

Another problem that I believe is connected to it is that I can't open a browse window. On photobucket for example I'll click "browse" and it won't open. But if I restart the browser a few times it will eventually work, just like the problem above. I had some sort of worm on my computer earlier this month. I removed it and since then ran multiple more scans (malware anti-bytes) and nothing new comes up.

Any help will be appreciated. I know this will be hard to diagnosis, but maybe the problem with the browse window might help narrow it down? It's the first time I've ever heard of that problem occurring.

Thanks.

A:"encountered a problem and needs to close" error messages, Can't open programs

Please avoid using IE as it only works if you purchase it and that too if its under warranty, else it might throw some or the other errors. Instead, you can try Google Chrome which never give you this sort of problem.

Moderator Edit: Ignore this post. It's completely untrue.

3 more replies
Answer Match 108%

I posted this in the XP forum and was directed here, so I'll just paste my post from there. I will also include all logs the sticky reccomends.

I'm getting this error message on 90% of programs I try to open. But if I keep trying it will eventually open. It doesn't happen on chrome/firefox, thankfully.

Another problem that I believe is connected to it is that I can't open a browse window. On photobucket for example I'll click "browse" and it won't open. But if I restart the browser a few times it will eventually work, just like the problem above. I had some sort of worm on my computer earlier this month. I removed it and since then ran multiple more scans (malware anti-bytes) and nothing new comes up.

Any help will be appreciated. I know this will be hard to diagnosis, but maybe the problem with the browse window might help narrow it down? It's the first time I've ever heard of that problem occurring.

Thanks.



DDS (Ver_10-03-17.01) - NTFSx86
Run by Owner at 7:27:26.90 on Wed 05/26/2010
Internet Explorer: 6.0.2900.5512 BrowserJavaVersion: 1.6.0_20
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.1527.784 [GMT -6:00]

AV: AVG 7.5.552 *On-access scanning enabled* (Outdated) {41564737-3200-1071-989B-0000E87B4FB1}
AV: avast! antivirus 4.8.1296 [VPS 100526-0] *On-access scanning disabled* (Updated) {7591DB91-41F0-48A3-B128-1A293FD8233D}

============== Running Processes ===============

C:\WINDOWS2\system32\svchost -k DcomL... Read more

A:"encountered a problem and needs to close" error messages, Can't open programs

Just going to bump this.

3 more replies
Answer Match 107.7%

I know that the processor uses more electricity the more cycles it performs, and I leave mine underclocked unless I'm playing a game or something.

But what about RAM? Does full/addressed RAM use more electricity than empty/unused RAM?

Or to put it more practically, if I leave my 500MB of Firefox tabs loaded but untouched for 7 hours while I sleep will it use more power than if I had closed and then reopened them?
 

A:Solved: Does RAM consume more power "full" than "empty"?

8 more replies
Answer Match 107.7%

I am getting an "Access is Denied" error message on a hard drive that I am trying to recover files from that is from my HP Pavilion with Windows XP that fried. My hard drive is still good, and I am trying to rescue the files in the "Documents and Settings/Owner" folder. I have connected the hard drive to my laptop, which also has XP; but when I try to open the "Owner" folder in "My Documents", it tells me that "Access is Denied." And when I hover over the folder, it says "Folder is Empty." But it is not empty. I can also access everything else on the drive fine -- just not this folder. I suspect that this is a networking type of issue, but I am not sure how to resolve it. Can someone please help me?

Thank you,
 

A:Solved: "Access Denied", "Folder Empty"

9 more replies
Answer Match 107.7%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Answer Match 107.4%

Mods, if you feel that this thread is more of a "Windows" issue, please feel free to move this thread.

Here last year I did my second build because I was having "boot" issues. Wasn't certain what exactly the problem was at the time. But something some how screwed up the boot sequence in my system, and where everything was pretty much "outdated." I just went ahead and did another build.

Though, since then I've been pondering around with the thought of using a SATA to IDE adapter so that I can retrieve what ever salvageable data I can from one of the two HDD's that was in my last build. So I finally broke down and ordered a couple different one's earlier this week.

Unfortunately, I've been running in to some problem(s) when I try to launch with the IDE in place.

Upon initial launching, the boot sequence seem to take some time longer than it normally does with out the IDE HDD in place. Though after a 15-20sec lapse I'll get an error screen displaying an windows error code of "0xc000000e" with a prompt message below stating "The boot selection failed because a required device is inaccessible"

I searched all over online to see what that error code represents, only to get "pages after pages" of sites with each site telling me something different.

I have no intentions of using this as a third HDD in my system. I just want to retrieve select data from it.
 

A:Error code "0xc000000e" "The boot selection failed because a required device.........

16 more replies
Answer Match 107.4%

MS thinks that one of my PCs is running W7 that's not genuine. It is genuine - at least I bought it from Amazon and paid ?141 for it so that - to me - means it's genuine. It may not be but neither Amazon nor MS will take any responsibility for it not being genuine so I've given up with them both. I think that the issue arises because of hardware changes I've made. Oh - yes, I've lost the box with the key on it too.

Long story short. I use this PC very little and when I first first got the black screen and messages after I installed a larger hard drive and reinstated the drive image from an Acronis backup. I stupidly forgot to reinstate the drive signature. Then it happened again when I changed the ITX motherboard.

Now here's the real question. Every now and then it gives me the "black screen" treatment. I fix it by restoring a drive image and turning off W7 updates.
If the damned thing is told not to call home then it shouldn't should it? What's going on? It seems to give me a month or two and then goes psycho on me like HAL9000!

A:How do I stop W7 "calling home" and displaying "not genuine" messages?

If this is an OEM version then I can understand why it's doing this after you changed motherboards, since it is forever tied to the first one it is installed on.

If you can follow these instructions for activation issues,

Windows Genuine and Activation Issue Posting Instructions

The results of that can help resolve your issue.

Filling in your system specs will help as well,

System Info - See Your System Specs

If your installation is valid then there's no reason to turn off updates or try to keep it from calling home.

6 more replies
Answer Match 107.4%

Hi, I'm using Windows 8.1 x64 and I'd like to add to the MAIN menu of context menu (just right-clicking) the options to create a New Folder and a New Text Document. Right now I have to go to the "New" option and then select Folder or Text Document.

Thanks!

A:Add "New Folder" and "New Text Document" in context menu

This may help:

How to Add Any Application Shortcut to Windows Explorer?s Context Menu

10 more replies
Answer Match 107.4%

There appears to be no open thread on this issue...disappearing context menu "new/textdocument" option.

After trying several alternate text editor demos I found that my registry .txt entry was empty except for the (default) line item...I replaced the entry with an expanded entry found elsewhere on this forum which called for notepad.exe and included ItemName and NullFile etc.

After rebooting and checking my program associations to verify that my new editor, EditPlus, was the default, I found that the "new/text document" option appears and works in all the usual places including the desktop...

But there must be more to the story... Notepad still appears in the ItemName entry. Is this just a default reg entry, with the actual default program assignments appearing elsewhere?

BTW, as an old poster suggested elsewhere X-Setup has been de-commissioned but is still available on MajorGeeks. It has some editing capability but wouldn't add a new TXT item because "it already existed" (already registered).



W7 x64 SP1

More replies
Answer Match 106.2%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Answer Match 106.2%

I've researched this but it's confusing....I get that message and then "please reinstall Microsoft XML core services 4.0 v.2 or higher"

Can someone tell me EXACTLY the process for installing that stuff? I downloaded the stuff I was told to, but it's a lot of different files, not sure where to put them, or how to install them, etc.

It would be appreciated- thanks!
 

A:Solved: Nero 9 giving error message: "unable to create XML parser instance"

You need not worry about "where to put them" as any installation routine will automatically put the files in the right place.
You were directed to the wrong place so delete what you downloaded from there.

Now you just need to know where to get what your PC says it needs:

For Microsoft XML Core Services 4.0 SP3 go here: http://www.microsoft.com/download/en/details.aspx?id=15697

Just click the download button to the right of msxml.msi (the first of the three download options).
You'll end up with just one file to deal with.
Double click that file to install.

That should fix the nero error, hopefully.
 

3 more replies
Answer Match 105.9%

Hello -

Using Windows XP Pro with all the available patches and SRs fyi.

I've had this sending phantom messages problem for several months and finally decided to do something about it today I'm posting my case here in the hopes that it might help you fix this issue with Outlook 2003 (and/or possibly other versions of Outlook as well).

In addition to the phantom message issue, I was having an issue where messages would hang around in the Outbox and not be sent even after restarting Outlook 2003, and sometimes even after rebooting. That was causing some real problems, particularly when I wouldn't notice messages were hanging until several hours later lol.

So I started researching both problems at the same time, and just for kicks decided to change the port for outgoing mail (SMTP) to see if it helped with the stuck/hanging messages in the outbox. I set my main email account to use port 465 with SSL. I then sent a test message to myself and watched to see if it got hung up, but it did not. Cool, I thought, that might be one problem solved.

Then, before I received the test message back, I saw two read receipts arrive in the inbox - they were from January of this year! Having read that the "Sending 1 of X messages - when the outbox is empty" issue in Outlook can be related to read receipts I was curious if that problem would go away as well.

Sure enough I sent another test message, and for the first time in months Outlook said "Sending 1 of 1 ... Read more

More replies
Answer Match 105.6%

Can you please tell me the steps for removing the following messages-
they appear when the computer starts.
"c/windows/inf/other.exe" "c/windows/system32/config/win.exe"

Note: I have followed some steps to check if there is virus, this is ok, no problem with virus.
I just don't want to see this message appearing! It irritates me! Help!!!

Thanks a lot!

More replies
Answer Match 105.6%

every time i try to open one of this folders a window apears with this content
cant have acces to C:\Documents and Settings\Mike\Local Configuration\{one of these folders} acces denied
this affects my IE i cant download nothing thru IE all my files on that locations i cant set dispaly pictures on WINDOWS LIVE messenger and all thinks that has anything to do with those folders
any suggsestions or idea
hope you can help me
pd ive scanned my computer and its all clean also i cant install windows XP serivce pack 2 im kinda stucked :/
 

A:cant open "temprorary files" "aplication data" "program data"

11 more replies
Answer Match 105.3%

I have searched to see if this was asked before without any success. Maybe someone has run into this problem before.
When I open "my computer" or "control panel" after I close it...it automatically goes into Internet Explorer as a blank page. Most of the time, when I close the IE blank page...it stops responding and I have the control-alt-delete to "end the program"
Thanks in advance for any help.
 

A:closing "my computer" or "Control Panel" open internet explorer window

Possibly malware - anything openning ie on its own raises an alarm in my books. Post a HJT log to the malware removal section of the forum and let the experts take a look at it
 

3 more replies
Answer Match 105.3%

Hi TechGuy,

I'm having some recent problems on my laptop. When I log-in and start using it, the performance starts slowing down. When I look at the Task Manager, I notice that the task called Explorer.exe takes up a lot of my CPU. In a couple of minutes, I also start getting Internet Explorer windows to pop-up on my screen (I normally use Firefox) with advertisements suggesting that my computer is infected and some software downloads that could help. I recently installed McAfee Total Works, or whatever they call their 10-in-1 software which is supposed to do it all. I ran several scans, and on some of them, if did find and disable the Generic.dx trojan. Even though it claims it is doing something, I don't notice any changes - Explorer.exe continues to bog me down, and the IE windows keep popping up to the point that I cannot use my computer effectively anymore.

IBM T-40 laptop (about three and a half years old)
Microsoft XP-Professional

Any pointers would be truly appreciated!!

Thanks,
Sandjosh
 

A:Solved: "Explorer.exe" process keeps running, IE Windows intermittently open, "Generic.dx"

16 more replies
Answer Match 105.3%

Hi every one,
I have Intel "DG31" and "core 2 do"
Program hangs, when i try to open or save as a file In "excel-2003" and "corel draw9" and "WILCOM Es9"
and in task manager it shows ?not responding?
But when i try to open it by clicking on the file using windows explorer it works quite well.
Earlier i used same programes on the "865glc" and "2.4" there was no problem,
I have also tried many Intel computers to trace the problem
i found the problem on every computer that was build on the motherboard later then Intel 865
Now what to do?
Mohammad Imran

More replies
Answer Match 105%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Answer Match 104.7%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Answer Match 104.7%

infected with "vbs", used "Flash_Disinfector" & folders on hard drive unable to open
________________________________________
HI,
i got infected with "vbs" through someone's usb, i ran "Flash_Disinfector", then installed "kaspersky 7", scaned the whole computer, it also deleted vbs trojan. However, after that when i tried to open my computer by clicking on its icon, it did not open, i tried to open it fron strat up, but the result was same. all others like my documents etc were all right, i open my computer through my documents, opened my c drive, when i tried to open further any folder present present in the C drive it gave me the error, that is,this item "1002931234.vbs" that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. Do you want to delete this shortcut? Howerever all my folders were not having any shortcut sign & it was same with all folders present in all my drives, but when i wrote the name of the folder in the address bar, it opened normaly, so now i cannot open my computer through its icon plus all the folders present in my hard drive. please help me to sort this thing out.

dds


DDS (Ver_09-12-01.01) - NTFSx86
Run by Nadeem_Ahmad at 14:54:49.54 on Sat 03/13/2010
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professional 5.1.2600.2.1252.1.1033.18.1975.1542 [GMT 8:00]

AV: Kaspersky Anti-Virus *On-access scanning disable... Read more

A:infected with "vbs", afte "Flash_Disinfector" all folders on hard drive don't open

Hello buct,

It will require more than 1 round to clean the system. Please stay with me until given the 'all clear' even if symptoms seem to abate.

Download ComboFix from one of these locations:

Link 1
Link 2


* IMPORTANT- Save ComboFix.exe to your Desktop

====================================================


Disable your AntiVirus and AntiSpyware applications as they will interfere with our tools and the removal.


====================================================


Double click on combofix.exe & follow the prompts.

As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this pre-installed on your machine before doing any malware removal. It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.

Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.

**Please note: If the Microsoft Windows Recovery Console is already installed, ComboFix will continue it's malware removal procedures.




Once the Microsoft Windows Recovery Console is installed using ComboFix, you should see the following message:





Click on Yes,... Read more

10 more replies
Answer Match 104.7%

HI,
i got infected with "vbs" through someone's usb, i ran "Flash_Disinfector", then installed "kaspersky 7", scaned the whole computer, it also deleted vbs trojan. However, after that when i tried to open my computer by clicking on its icon, it did not open, i tried to open it fron strat up, but the result was same. all others like my documents etc were all right, i open my computer through my documents, opened my c drive, when i tried to open further any folder present present in the C drive it gave me the error ( i am including the error meggage in attachment), howerever all my folders were not having any shortcut sign & it was same with all folders present in all my drives, but when i wrote the name of the folder in the address bar, it opened normaly, so now i cannot open my computer through its icon plus all the folders present in my hard drive. please help me to sort this thing out.

A:infected with "vbs", used "Flash_Disinfector" & folders on hard drive unable to open

Hello and Welcome.

We want all our members to perform the steps outlined in the link I'll give you below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

---------------------------------------------------------------------------------------------

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

1 more replies
Answer Match 104.7%

I installed some software to assist me in converting .pdf docs. I didn't keep the name of the software but did uninstall it via control panel.

I now have mulitiple "File" menu entries: 29 entries between "open" and "save". The entires are all idenical, "Open PDF"

Nothing happens when I click on them. How can I remove them from my "File" menu?
 

More replies
Answer Match 103.5%

when i right click on my DVD writer i do not get the options "OPEN",EXPLORE & AUTOPLAY"..How do i bring them back?
 

More replies
Answer Match 103.5%

safe to assume its impossible to remove the "open" and the "merge" entries from the context menu? I figure if i want to open or merge them i would simply double click. Clutter and redundency in this vein dont suit me :P

A:remove the "open" and "merge" entries from context menu?

Open I don't think so, Merge sounds like it is added by a 3rd party program, and likely can be removed. Have a look at ShellMenuvVew and ShellExView from NirSoft. You can remove entries with both. But Open will not be listed, and I have seen no way to remove it. A Guy

2 more replies
Answer Match 103.5%

When I right click on my C & D drive in My Computer the Open and Explore words in in odd characters and clicking on them does nothing. This happened after I used a USB key on another computer that had these characters. How do I fix this?
 

A:Solved: Right Click C Drive "Open" &amp; "Explore" in odd characters

8 more replies
Answer Match 103.5%

I have looked around for help on this issue and havn't been able to find a resolution that works. I think because I havn't been able to find any imformation on my specific issue.

I am one of the most computer literate people I know, so when a co-worker mentioned to me that he was having problems with his computer, I agreed to look at it. His problem was simple, he had a lot of viruses. I have cleared most (however I assume not all) viruses and instinces of spyware. The computer worked fine for a little while while I did some final checks on his computer, then the problems started.
He has a Dell Inspiron 710m Laptop, running Windows XP Pro. (Service tag 8sk8091)
As far as I can tell, he has not added or upgraded it in any way. He only has some basic programs.

I know that the issues might have something to do with his wireless.
He is running the Intel® PRO/Wireless 2200BG.
The computer is getting stop errors (BSOD)

The first one was called DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop: 0x000000D1 amd listed the file w29n51.sys (which upon further study, turned out to be a file related to his wireless.)

I have already updated the drivers and reinstalled the program with the latest versions on the Intel website.

I also noticed (though with not frequent) the stop error with the same name and stop code, but which listed the NDIS.sys file (which upon further study turned out to be a system utility).
and now, I have gotten a stop error of 0x0000000A, (IRQL_NOT_LESS_OR_EQU... Read more

A:Solved: Windows "logs off" after "open with" repair (userinit.exe)

16 more replies
Answer Match 103.5%

When I press "open file" in the program "Business Intelligence" of an Office
program like Excel, I would like the window columns to be in "detail" view
instead of "list" view.
How can I do this?
Is this a registry default that can be changed?
Thanks,
Josh
 

A:Get "detailed" view on "open file" dialog window.

7 more replies
Answer Match 103.5%

For some time now, double clicking on a folder no longer opens it as usual. Instead, double clicking on a folder causes a separate Explorer Search window to open, with that folder's name under the "search in" tab. In fact, when i right click on a folder, the first and bold-faced option is "search", as opposed to "open". So to open any folder I have to right click it and hit open, which is slow and annoying. I cleaned out my registry, spyware, viruses, everything, and still this problem persists. I also checked the Mouse control panel, nothing there.

Anyone know what's going on with my computer?

A:Help! Double-clicking on folders prompts "search", not "open"

Hi

Open "My Documents", go into Tools>Folder Options and under General>Browse Folders choose Open each folder in the same window. Save that and then goto View>Explorer Bar> and click Folders.

See if its better now.

10 more replies
Answer Match 103.5%

Hello guys,

I don't know what I did, but nothing happens when I click on those two things in the search bar:

View image: wtf

I reinstalled Windows a few hours ago, and IIRC pressing those with the mouse lead somewhere. Now when I click on them, it does nothing. I have to type in "Settings", so I can click on the actual Windows App. Then I can navigate to those settings. IIRC those results were "clickable".

Can somebody help?

Thanks in advance!

A:Can't open "Windows Update Settings" or "Check for Updates"

Hello iamnewhere,

If you like, here's a Windows Update shortcut to use for now until hopefully an update will sort it for you.

Windows Update Shortcut - Create in Windows 10

3 more replies
Answer Match 103.5%

OK guys, im kinda new to this forum, so... hello.
My computer has a not so serious problem-When I try to open Local Disk C by double clicking it says:
"
Windows cannot find install.exe.
This program is needed for opening filed of type 'File'.

Type in the executable file to be used instead:
_______________________________________
"

This problem isnt very serious, I just dont want my computer to remain "corrupt" if you know what I mean.

Help my and I will be grateful!

A:Cant open C:/:"Install.exe is needed for opening type of "file""

Hello and Welcome to TSF

Have you scanned your system for viruses lately? What antivirus program is installed on your system?

4 more replies
Answer Match 103.5%

In any application under Win XP, when I use a Save As or Open dialog box, and click the down arrow next to the location box to search for the folder I want, the application never responds. Usually, I have to click the arrow a couple of times and then it sort of wakes up and responds, or the application crashes (the title bar of the dialog box will say "Not Responding".

Often, in the case of the Save As dialog, it won't say Save As in the upper left corner, only an "S" will appear there.

Seems like a memory issue or else something corrupt in the system. Before I shell out $35 to MS to have them fix something that shouldn't be broken, can anyone help???
 

A:Sluggish/nonresponsive "Save-As" and "Open" dialog boxes

15 more replies
Answer Match 103.5%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Answer Match 103.5%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Answer Match 103.5%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Answer Match 103.5%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Answer Match 103.5%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Answer Match 103.5%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Answer Match 102.9%

These illegal operation messages just started popping up:
"ATTNENGN" caused an invalid page fault in module MSVCRT.DLL at 0167:780018ee.
"WEB" caused a general protection fault in model WEB.EXE at 0001:0000bb4c.
I haven't installed anything or downloaded and everything seems to be operating OK. But these messages are appearing for a reason and I would like to fix the problem. Thanks.
 

More replies
Answer Match 102.6%

I am trying to uninstall Yahoo Messenger using Add/Remove Programs. It won't let me and this error message comes up.

Can someone help?

Thanks...and have a great day! Note: Just registered and first time poster.
 

A:Solved: Error: "Could not open "INSTALL.LOG file"

You have most likely run a Cleaning program that has the option to delete LOG files.
Some LOG files are just that. Files that "log" activity.

But some, like the one you reference, contain information about how to UNinstall that application.

In this case, I would reinstall Yahoo Messenger, and THEN uninstall it.
 

3 more replies
Answer Match 102.6%

Recently took my office notebook and accessed wireless internet from hotel last week. Since I logged in at this location the "to box" in every incoming mail message is blank. The box is there, but no content.

I have checked the properties of these mail messages - the bottom line states
"X Watch Guard -IPS: headers checked".

Please help!
 

More replies
Answer Match 102.3%

Hello,

I need help with this Diskette issue please. "Diskette Drive 0 Seek Failure"
I've had this problem a few times in a couple of years and I have been able to fix the error by pressing F2 and going to the SETUP. And I've done this with no issues. But this time I thought I fixed it but now I get this new error: "A disk read error occurred Press Ctrl+Alt+Del to restart". After I press Ctrl+Alt+Del it takes me back to the same error massage "A disk read error occurred Press Ctrl+Alt+Del to restart". Need help please. This is a Dell Desktop, Windows XP.
Thank you.

Sue
 

A:"Diskette Drive 0 Seek Failure" Error Then "A disk read error occurred Press Ctrl..."

9 more replies
Answer Match 102.3%

I've been having some problems with my computer and I've always somehow managed to work my way around the issues spyware/malware etc. have created but lately it's been getting out of hand.. Some time ago I got a virus or something that made the entire tab under "Processes" dissapear. So I could not see process-names in the task-manager. I have re-installed XP but this problem persists. I have been using a different application to monitor and handle processes.

The problem now is the constant pop-ups generated from this fake anti-virus program calling itself "Anti Virus Pro 2007" or something.. It pops up with fake commercials, and even attach itself into other explorer-windows while I view other pages.

As popups and messageboxes keep popping up, I close them, but after a while windows will open a messagebox telling me "Buffer overrun detected in e:\Windows\system32\explorer.exe" (or \\windows\explorer.exe I don't remember really but you get the idea) and explorer.exe will be terminated, sometimes taking some internet explorer windows along with it, other times explorer.exe just starts up again and all my windows remain.

I used to have Norton but was forced to remove it as it was sucking up all my CPU. It rendered my computer useless, as I mainly use it for gaming.

I've also experienced having the connection between me and my modem broken while beeing on the internet, and I don't know if my computer actually is offline or if -I'm- just... Read more

A:Infected - "Win Anti Spyware" "Buffer overrun error" and a fake dialer or something++

Hello and welcome to TSF

Please download ComboFix

Note: It is important that it is saved directly to your desktop.

Close all browsers. Double click combofix.exe & follow the prompts.
When finished, it will produce a log for you. Post that log in your next reply.
Note: Do not mouseclick combofix's window while it's running. That may cause it to stall.

You are using an older version of HijackThis. Please do the following to download and install the latest version of HijackThis v2.0.2:

CLICK HERE to download the HijackThis Installer:Save HJTInstall.exe to your desktop.
Double-click on HJTInstall.exe to run the program.
By default it will install to C:\Program Files\Trend Micro\HijackThis.
Accept the license agreement by clicking the "I Accept" button.
Click on the "Do a system scan and save a log file" button. It will scan and then ask you to save the log.
Click "Save log" to save the log file and then the log will open in Notepad.
Click on "Edit -> Select All" then click on "Edit -> Copy" to copy the entire contents of the log.
Come back here to this thread and paste the log in your next reply.
Do NOT have HijackThis fix anything yet! Most of what it finds will be harmless or even required.

You may delete the older version once you have successfully downloaded and installed the latest version of HijackThis v2.0.2.

Expected logs:

Combofix.txt
HijackThis log

19 more replies
Answer Match 102.3%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

A:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Answer Match 102%

This has been happening the majority of the time for the last week or so. I've scanned for viruses, spyware, etc., but that isn't the problem. Whenever I try to save as, nothing happens. The hour glass comes up for about a half a second and then nothing happens. The same when I try to click browse or when I try to open a file, like pictures. This has never happened before except the last few days. I had a problem with spyware, but I've since installed zone alarm and firefox instead of IE explorer, which I had to do because I was getting an error on IE and it wouldn't open. I hope someone can help. Thank you.
 

A:cannot "save as," "browse," or "open."

Welcome to the forum.

1. Which version of Windows, to include SP?

2. Did the problem begin after installing / removing hardware / software, to include updates to AV & Windows?
2a. When was Windows last updated?
2b. Is your computer set to obtain Windows updates automatically?

3. Which tools did you use to scan for malware?

4. Can't save as, browse or open. Please explain. For example, what can't you open? Can you open notepad, type a few words, then save the file?

5. What kind of problems were you having with IE?

You're welcomed.

RF123
 

1 more replies
Answer Match 102%

Hello everyone,

I've run into an issue that I can't seem to find answer to on the net.

When I open My Computer, Control Panel or any folder no files or directories display, after first there is a green loading bar on the address bar and little magnifying glasses (searching icon) on the left side directories but never displays anything.

The files I can see in other folders are unable to be opened and have white blank page icons next to them.

I can still run application so I'm not sure what the issue is. I ran a scan for virus with nothing found and I have also ran a windows update but have not restarted my PC yet.

Any help would be greatly appreciated, thank you.


PC/Desktop Custom Build

OS Windows 7 Ultimate x64 C

PU Intel Core i7-2600k @ 3.40GHz

Motherboard Asus p8z68-v pro

Memory 12gb

Graphics Card(s)NVIDIA GeForce GTX 560 Ti

Hard Drives
P1: M4-CT128M4SSD2 ATA
P2: WDC WD20EARX-00PASB0 ATA

A:When I open "My Computer" or "Control Panel" nothing displays.

Please run this and tell me the results following option 2 in this tutorial:

SFC /SCANNOW Command - System File Checker

1 more replies
Answer Match 102%

Hi, I'm a new-commer and have been following this thread avidly and taking everyone's advice as I too have identicle problem to Chaz and other bloke i.e my PC (XP) is very slow, shows torch when you open "My Computer" for 15 secs, and when I use Explorer takes ages to find a web address so I'm using Firefox which is fine. Been bothering me for months, tried RWnewson's registry and didn't work. i don't have. Created shortcut direct to C drive to bypass "My Computer" delay however while this works, PC is becoming worse as when I move any files from one folder to another within the C drive the PC can;t cope and stops responding. HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanc ed]
"NoNetCrawling"=dword:00000001 anyway.
My computer is not part of a home network nor does it say searching when I open My computer. This did all start when I installed software for new digital camera and webcam. Uninstalled cameras but still runs slow. Bugger.. Help. Tried registry cleaner and various virus killers. There is nothing threatening.
Interestingly when I end process for sychost.exe everything works fine but then Windows closes down in 30 seconds. PLEASE HELP!!!!
You all seem interested in Hyjack this report so here is mine
Logfile of HijackThis v1.98.2
Scan saved at 00:00:20, on 26/10/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2900.2180)

Running processes:
C:\... Read more

A:XP "My Computer" and "Explorer" taking ages to open

assuming you ran spyware and adaware cleanups, i would suggest reinstalling windows..... Windows (every version) will eventually slow down and not respond, act very unstable, not cooperate, and eventually it will commit suicide and give you major blue screens. then the computer has problems booting... a reinstall (a fresh reinstall preferebly) would probably fix it.....

could you post your system specs? that may help a little bit...
 

3 more replies
Answer Match 102%

Hello there, when the desktop loads up, I get this strange message:

"Open With:

Choose the program you want to use to open this file:

File: Media"



Does anyone have any ideas why?

I have a screenshot of the programs which run at startup:



I have a HiJackThis log if it helps:


Code:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 08:28:24, on 29/05/2011
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskhost.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Logitech\SetPointP\SetPoint.exe
C:\Program Files\VIA\VIAudioi\VDeck\VDeck.exe
C:\Program Files\COMODO\COMODO Internet Security\cfp.exe
C:\Program Files\Acronis\OnlineBackupStandalone\TrueImageMonitor.exe
C:\Program Files\Acronis\TrueImageHome\TrueImageMonitor.exe
C:\Program Files\Common Files\Acronis\Schedule2\schedhlp.exe
C:\Program Files\Common Files\LogiShrd\KHAL3\KHALMNPR.EXE
C:\Program Files\HP\HP Software Update\hpwuschd2.exe
C:\Windows\system32\rundll32.exe
C:\Users\Media Centre\AppData\Local\Google\Update\1.3.21.57\GoogleCrashHandler.exe
C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Siber Systems\AI RoboForm\RoboTaskBarIcon.exe
C:\Program Files\Common Files\Microsoft Shared\Ink\InputPersonalization.exe
C:\Windows\system32\mspaint.exe
C:\Program Files\Mozilla Firefox\plugin-containe... Read more

A:Windows 7 32 bit, when loading "Open With: ?" "File: Media" comes up

There must be an error with one of the startup settings.
Please use Autoruns by Sysinternals/Microsoft to see more info about Programs loading with your system.
Pay attention to Logon tab.

Looks like for some reason it is trying to load a folder as a file. "Media" is a part of a folder path.
Try to uncheck all values,where Media is a part of the path.

Also, please check for viruses with Kaspersky Virus Removal Tool Download
or Malwarebytes : Malwarebytes Anti-Malware is a free download that removes viruses and malware from your computer

4 more replies
Answer Match 102%

here a stumper for me. . . maybe one of you knows how to fix it...

when in my computer, if i double click on any of the drives, it opens up a search window instead of opening the folder! its sooo annoying. I have to right click and select 'open' every time.

if i right click, the menu opens there and 'search' is on the top in bold instead of 'open'.

i dont know how i messed it up, but if you know how to change the default action.
PLEASE HELP!!!

thanks in advance for any help

-kio

SOLVED THANK YOU THANK YOU!
 

A:default action "search" instead of "open"?! (in my computer)

8 more replies
Answer Match 102%

I changed my outlook email .ost file to open with auto cad by mistake. Initially it was opening with an Unknown application. How can I enable it to open with an unknown application again? please help

A:changing an ".ost"file to open with "unknown" application

You can try this tutorial and see if it helps.

Default File Type Associations - Restore

1 more replies
Answer Match 102%

Hello everyone, I'm new on here so I apologize if someone has brought this up, but does Microsoft have any plans to update Edge to where it can "Save as" or simply "Open" a file rather than just downloading everything to the Downloads folder? I wonder why they left it out; seems like a basic function to input. Thanks!

A:Microsoft Edge: "Save as" or "Open" features

It'll come as many have requested this. Wait for updates.

3 more replies
Answer Match 102%

When a download is complete, the dialog box opens, announcing "Download Complete" and when I Click the "Open Folder" button the "Download Complete" dialog box closes but the Target Folder doesn’t not open. First noticed this after SP3 in this XP Home environment.

Where’s the “Honor the 'Open Folder' button” setting to get this functionality back?
 

A:The "Download Complete" "Open Folder" button ignored

7 more replies
Answer Match 102%

About one month ago, a new problem surfaced:

Most times when I try to "Save As" a document and the application calls Windows Explorer for me to Browse where to save the file, it hangs for upwards of 60 seconds. The Browse window appears, but then I get a "spinning circular cursor" for 45-60 seconds until I can do anything. This occurs in all applications from MSExcel through Internet Explorer.

The system never completely crashes, but there is always this 60 second lag now.

The lag also occurs when I try to open a document...and to a less extent, but sometimes, when I simply open Windows Explorer (Windows Explorer is inconsistent as to whether it will give me a lag...sometimes it does work fine).

I have previously tried posting in the malware forum. I had picked something up they found...and cleaned it out, but that seems to have been completely unrelated to this as it was a virus redirecting my Google searches.

Can anyone help?
 

More replies
Answer Match 102%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did a SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps... Read more

A:Cannot open "my computer", "control panel" recycle bin, etc

Hello and welcome to TSF

Apologises for the delay getting to your log. The helpers here are all volunteers and we have been very busy lately. If you are still having malware problems, follow instructions below.

=======

You are using an outdated version of Hijackthis. Please uninstall from Add/Remove programs, and delete your current version.

Next, download HijackThis to your desktop

Alternate link

Double-click on the file you just downloaded.
Click on the "Unzip" button to install. It will by default install to the directory - C:\Program Files\Trend Micro\HijackThis

Upon install, HijackThis should open for you.

Should it not open, navigate to C:\Program Files\Trend Micro\HijackThis and double click on HijackThis.exe

1. If it gives you an intro screen, just choose 'Do a system scan and save a logfile'.
2. If you don't get the intro screen, just hit Scan and then click on Save log.
3. Do not post that log, instead, do this next:

=====================================================

Download Deckard's System Scanner (DSS) to your Desktop. Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - main.txt <- this one will be maximized and extra.txt <-this one will be minimized
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt here... Read more

1 more replies
Answer Match 101.7%

Hi all,

I burned an MP3 disk with Nero about 10 days ago, and lately when I try to burn anything it's giving that message -- insert empty medium. Nothing I seem to do works, restarting, with and without an disk in the drive. Both my drives are doing this, both show in "properties" that the entire space is used on the disk it THINKS is in the drive even when there is no disk in the drive. Anyone know why it's doing this and how to correct it? I reinstalled Nero. Grrr....

Thanks very much!
Jen
 

A:"device not ready -- "insert empty medium" message

I had a similar

JEn,
I had a similar problem with Nero goosing my writers. THe only way I managed to get it fixed was to system restore to the last point before Nero was installed.

I checked the drives and got a newer version of Nero - No probs for the last 5 Months now.

Hope this helps.
 

2 more replies
Answer Match 101.7%

Hi there,
Can someone please help to shed some light on this, or possibly fix this issue?
I've been trying for ages to get my parents computer to download and install updates.
It's running 7 Home Premium 64 bit with SP1.
The Windows Update page shows that Windows could not search for updates, which resulted in the error 8007370B
The link on that page to get help for this error has no results.
The system update readiness tool failed to fix the issue
sfc /scannow in an elevated command prompt results in the error message
Windows resource protection could not perform the requested operation.
I also tried to force WSUS offline updates, but ended up having to remove the temp admin account and cancel the updates when that failed.

log files attached:
Attachment 362134

A:Failed updates "WindowsUpdate_8007370B" "WindowsUpdate_dt000"

Your first run of CheckSUR found a fair number of errors, and managed to fix them, mostly - but to remain until now...

Code:
Checking Component Store
(f) CSI Payload File Missing 0x00000000 _isdel.exe wow64_microsoft-windows-i..llshield-wow64-main_31bf3856ad364e35_6.1.7600.16385_none_ca61f601a4548b8e
(f) CSI Corrupt Identity 0xC0150017 c64c420f5864b56f41d74a09d3a4941a, Culture=neutral, Version=6.1.7601.18283, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versyo~Scope=NonSxS c64c420f586..a09d3a4941a_31bf3856ad364e35_6>1.7601.18283_b5294749e54eed83 Bad identity

I need to have a look at your COMPONENTS registry hive

Please copy the C:\Windows\System32\config\COMPONENTS file (no extension) to your desktop and then compress it - upload the compressed file to your favoured fileshare site (preferably Dropbox or OneDrive) and post a link.

9 more replies
Answer Match 101.7%

I only get the BSOD when playing games, not any specific game, but any, sometime i can go a whole week of playing games and have no BSOD at all, and somedays 5 minutes after a game is running it will BSOD everytime, all day long. When I try to Run any game like GW2 Or Inquisition my pc turns into Bluescreen with an error CRITICAL_PROCESS_DIED or KERNEL_DATA_INPAGE_ERROR ..I've already Updated all my drivers and reinstalled all my games, also run chkdsk /f and memtest with no problems.


This is the screen:

Also this is my dump config:
(note that i have windows 8.1, not 7)

Still it doesn't create any File or Folder and when the BSOD happens the blue screen say that its collecting info but it doesn't get off 0% .
It's the same with the critical process died it just goes to the blue screen saying its collecting info but it also doesn't get off 0%.

I'm completely baffled with what to do as the blue screen view hasn't picked up anything and i cant find the dump files.
 

A:"Critical Process Died" & "Kernel Data Inpage Error"

Hi BTW, welcome to the TSG Forums....

You may find this from the MS Community helpful. If Greek is easier to understand than this article then come back to this Forum and someone will help you.

http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/windows-81-bsod-kernel-data-inpage-error-and/b67ae41a-9228-4462-9c53-d1f5d115f784

T.
 

1 more replies
Answer Match 101.7%

I have a big problem here,
I have used my hard disk for 9month,
Yesterday when I watched movie on the half way,
My hard disk suddenly disfuntion,
And I thought my laptop problem due to always lagging so I restart my computer.
But after that I can't read my hard disk (WD)in my computer.
It can read in computer management there.

Ways I try:
1)I try to uninstall and reinstalled again,BUT it doesn't work.
2)I try to unchecked the hide folder and device at view.
3)I try to update the software BUT it still disfunction.
4)I try to use disk management and initialized it BUT there appeared CANNOT INITIALIZED Due to I/O device error.

Any solution for me ?

A:Hard Disk can't read in "my computer ", "initialized",I/O device error

The most usual cause is that the Hard Drive is beginning to fail. Back up your stuff. Go to the website of the manufacturer and test the drive.

8 more replies
Answer Match 101.7%

Anyone tried deleting a registry key in Windows 7?  Got "access denied" or "Error while deleting key"?
The usual response is, "You need to run regedit as an administrator".  but I *AM* logged in as Administrator, and running regedit as administrator, trying to assign administrator full permissions on that registry key in order to delete it!!  
Am I mistaken, or isn't Administrator supposed to be able to administer and control all the settings on the computer, in order to set it up for the "Average Joe" user?
So, under the permissions menu of that key, go to advanced, change the owner from System to Administrator, and try again.  It's no longer saying "access denied", but "Cannot delete xxxxxx. Error while deleting key".

The scenario: Basically, the wireless has stopped working on a laptop. The device does not show up in Device Manager, but is in the registry, so the normal procedure is to delete the registry entry for the device in HKLM/System/CurrentControlSet (and /ControlSet001) /Enum/PCI    ,then attach the device or restart the computer, it finds the "new" hardware and reinstalls it. Easy!...

Not with permission restrictions on the administrator account it's not!  So I need to give myself permission, to give myself permission, to do a simple task like delete a single registry key!  Why, Microsoft, why???!!!  Please just make the Administrator accoun... Read more

More replies
Answer Match 101.7%

hi can u help me about instruction at "0x7c9100c8" referenced memory at "0x666f7260" it always appear every 4 hours and then my computer start counting for shutdown or restart. help please . . .

More replies
Answer Match 101.7%

Hi Everyone,

i am using CRichEditCtrl::GetLine() function to read the text from a dialog.
If my text contains any space character then it is throwing improper argument error and the application getting closed in vista only.....
What is the actual problem ????? why it is happening with vista only...?

Please suggest

More replies
Answer Match 101.4%

As I use Googlemail now how do I set up Open Office to use it to "send Documents as Email" please.
(I'm sure this is basic stuff but I'm at a loss with it)

A:Authorize Open Office to "Send document as email"

I pretty sure you may need third party software to do what you want if you are using gmail. Why not just send as an attachment.
Anyway look here and see if this will suit your needs. Affixa There is a free basic version for personal use.

3 more replies
Answer Match 101.1%

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

A:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

1 more replies
Answer Match 101.1%

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

A:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

3 more replies
Answer Match 101.1%

hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane

A:Remaking "My Music", "My Pictures", "My Videos" folders

  
Quote: Originally Posted by Legume


hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane


You have a backup from before the problem started? a win 7 dvd to do a repair install?
ken

4 more replies
Answer Match 101.1%

Hi:

Looking for insight/advice re: KB3054476.

According to Infoworld, it was "Optional" in May, but I was not offered it then.
This week, it was offered as "Important" and "Recommended" (!), but only for one of my 2 Win7/64 boxes.

I have read the MS KB article, as well as THIS FORUM THREAD, the latter of which includes a report of a BSOD due to this particular update.

However, there isn't much out on the web about it.
And most of the discussion about it is overly technical for me.
And I am confused as to why it was previously offered as "Optional", but now is "Important" or "Recommended".

I don't *think* I "need" it (as I have no webcam on this box). And I don't like to tempt fate by fixing things that are not broken.

So, 3 questions:
Is it safe to install?
Is it really necessary/important?
Or would I be OK to hide it?
Thanks very much in advance!

A:KB3054476 offered as "Important"/"Recommended"/"Optional"

The status of updates changes with circumstances.
If an update isn't relevant, it won't be offered at all.
If however it's relevant but the related software is not apparently in use, it may be 'optional' - and gravitate to 'Recommended' or 'Important' if the related software is in use.
It can also be promoted through the hierarchy by MS depending on feedback through WU and error-trapped feedback.


If you have (and use) a webcam, then it's probably best to install the update.

4 more replies
Answer Match 101.1%

I'm Running Windows 7 64 bit, Home Premium, fully updated.

On my laptop (64 bit Windows 7), "Recent Items" works properly, showing all docs I've opened only (no folders, as it should be). The taskbar Jumplists for each program also show recent docs opened in that program.

The "Recent Places" folder, however, is always empty, nor do recent folders show on the Jumplists for folders.

Searching has turned up nothing useful, but tells me I'm not the only one with this issue.

What I've tried already:sfc /scannow
making sure both the "Store and display" options in Taskbar and Start Menu Properties are checked.
making sure the reg key HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Recent points to the correct folder (%APPDATA%\Microsoft\Windows\Recent Items) and that the folder itself is actually named "Recent Items" and not just "Recent"
running a disk scan
Safe mode
Essentially, it seems that documents opened are recorded but not folders. I'm stumped at this point. Anyone know what's up with this?

More replies
Answer Match 101.1%

When I try to use Open Office Document to open an Excel file, I get the error message "The program associated with the selected template cannot be started, or the program cannot use the selected template." I tried the Microsoft artical http://support.microsoft.com/default.aspx?kbid=213890 but that was not the problem.
 

More replies
Answer Match 101.1%

Every time I open CREDENTIAL MANAGER I get: Error Code: 0x80070425 "The service cannot accept control messages at this time" this happens every time. Also, what is the point of CREDENTIAL MANAGER? I never remembers one password!

More replies