Tech Problem Aggregator

Solved: Black bars on the sides of my display

Q: Solved: Black bars on the sides of my display

EDIT: Never mind, I messed around with the controls on the monitor and it's ok now.

More replies
Answer Match 99.12%

Hello,
For months now i have 2 black bars on the sides of my laptop. I have a Hp laptop. I have searched on the internet, but none of the answers worked, my resolution is at its maximum.
I do have a Hp application and driver recovery dvd, but i dont want to try things out because i dont want to lose my files.

I hope someone can help me!!
 

A:Black bars on sides of screen. HELP!

13 more replies
Answer Match 99.12%

Got a computer im working on and Im stumped...

Its a Dell Inspirion B120, and when in windows... their are to 1 inch thick black bars on both sides of the screen horizontally.

It is a windows issue, because it doesnt appear when in bios, and executing diagnostic tools outside of windows.

Any ideas?
thanks.

A:Black bars on both sides of screen

Try uninstalling, then reinstalling the video drivers.

If it continues, I'd say that the video chip/card is dying.

Louis

2 more replies
Answer Match 99.12%

This should be an easy fix, I just do not know where to get the CCC for my computer. I have an Intel i3 Processor and an ATI Radeon HD 5670 Graphics card. Last time I tried to download the CCC it said I did not have any AMD software to be detected. I just want to get rid of these stupid black bars.

Note: I am running windows 7 professional off a bootcamp partition on a mid 2010 iMac. Windows 7 runs fine though.

More replies
Answer Match 76.44%

Three or four times now (and all in the past week) my second-user Compaq Armada (had it for 8 months ish, but it's fairly old - P2 233mhz) has booted up with inch-thick vertical black bars covering part of the screen (through the Compaq logo thing, the Windows loading screens, the AVG boot-up scanner and it's still there on the desktop) tilting the screen forward slightly fixes it straight away. It then looks perfectly fine - colours etc are correct and sharp all over the display.

There's a rattle and the feeling that something's falling inside the lid every time it's opened and that's been happing for about 2 months now and I haven't worried about it too much until now and I don't know if it's connected, and everything apart from the dodgy display on start-up (not *every* time and not always coming in *exactly* the same places, and not always from the beginning or lasting right until the desktop) the system is running fine.

The laptop has never been dropped or anything (while I've owned it anyway) and is always stored lid-up, with nothing stacked on it, on a flat surface in a laptop carry bag when not in use.

So... anybody got any idea what's happening? My screen isn't about to die any second is it?

Thanks in advance,

Kat
 

A:Black bars on laptop display

Laptop screens are connected to the motherboard vis a ribbon cable. It's possible that this is loose, or cracked, as tilting the screen fixes the problem.

If you are handy enough around taking apart a laptop, then it is an easy enough operation to open it up and check for yourself, however it is very easy to do damage to the case, and componenets if you are unsure of yourself.

Take it to a repair shop, or if you are willing to muck around with it, provide Exact specifications of the laptop, and a serial number if it is still there. That will make is easier to find technical docs that can help.

Where can I find the serial number on my Compaq Computer?
 

3 more replies
Answer Match 76.44%

Hi, i have a LCD monitor (NEC AccuSync LCD 71VM), i have noticed that the bars around the viewing monitor display are not the same size from one corner to another..is it a problem or thats the way it is?
 

A:Black bars around monitor display..

simple solution: screen not fixed in the middle. feel free to fiddle around with the options on your monitor...if that doesnt work, consider more complicated solutions that could include anything from installing newer drivers to replacing the card
 

1 more replies
Answer Match 74.76%

Hello guys!
I have a Dell Optiplex 3010 and I have recently installed Windows 7 on it.
I have also installed the drivers and everything works fine, except the video driver, and I cannot get rid of the black bars around my monitor. I know it is a scaling problem and I've read on some forums that this could be fixed easily using  catalyst, but I cannot install it.

Please help.

A:Dell optiplex 3010- cannot get rid of black bars around my display

I am not familiar with this particular system, but in the white box world one often has to set HDMI connections to overscan to use the full screen.

2 more replies
Answer Match 66.36%

So usually I have these black bars on the side of the screen when I play games, no big deal. But all of a sudden, I quit the game I was playing because I did not want to play anymore and the black bars stayed on the sides of my screen.

Now what ever I do I have these annoying black bars on the sides and I cannot get rid of them, even as I type this to you now I have them. They are looking at me, they want to kill me, they talk to me at night! Well, maybe not but they are annoying! I like the black bars when I play games but I do not want them for everything, my desktop is like squished because of them, help please!
 

More replies
Answer Match 65.52%

Have a 21.5 " Acer monitor with an old AMD Radeon 3450 HD

There are black borders on the display.
Icons oval,also pic distorted
On display settings the max. res. seen is 1280 although the monitor is full HD

More replies
Answer Match 64.68%

I have connected my laptop to my tv using a3M Premium VGA SVGA 15pin Monitor Cable Lead Male to Male PC TV it displayes ok on the TV but the screen on my laptop goes black on both sides of the screen & the icons  shift around on the screen, I can still use the laptop but it is to hard to see & comes to full size when I remove the cable from my lap top. can you tell me what I need to do to get it to full screen on my  lap top. thank you

More replies
Answer Match 64.68%

I have tried searching everywhere and trying everything that I have found and nothing works.

I am running windows xp on an older packard bell monitor. I'm not even sure what size it is maybe a 14" or 13"? On packard bells website they don't have a driver for this monitor. I tried to install a generic driver for 640x480 and that doesn't work. The screen resolution is set on 800x600 and if you put it on anything higher the screen gets all fuzzy. So two question. How do I fix this and how do I figure out what size my monitor is?
 

A:Black 1" gap on both sides of my screen

6 more replies
Answer Match 63.84%

Help I just turned on my computer this morning and when the screen came up it has a black line on both sides of the screen how do I get my full screen back?
 

More replies
Answer Match 63.84%

I've had my Compaq Presario SR1250NX for 1 1/2 years. It's a Pentium 4 using Windows XP. My monitor is a 17" flat screen (not panel).

About 2 weeks ago the monitor screen display started jumping in and out on both sides.

I set the refresh rate to its highest setting (85) and that helped but did not stop it, it just made it less frequent from happening every minute to every several minutes.

Nothing has changed in my home office electronically. My phone and cell phones are the same they've always been sitting in the same places. I haven't added any programs to my computer, just normal updates as they occur.

What could this be? What should I do next?

Thanks,
Blake
 

A:Monitor Screen Display Jumps In & Out on Sides

Hello and welcome to Techspot.

Sounds like a monitor problem to me.

You need to try another monitor to confirm this.

Regards Howard :wave: :wave:
 

1 more replies
Answer Match 63.42%

How do I get rid of the two black rectangular boxes on the sides of the computer screen when playing Flight Simulator X

A:Flight Simulator X have black rectangular boxes on sides

Try increasing the screen resolution on the game to the maximum. This can be done through the game settings. If this works/doesn't work please reply

1 more replies
Answer Match 63.42%

Hi guys, i am using win7 ultimate with lg 32' tv as monitor, but since yesterday it has started showing black handles on the the sides.

I have tried changing the resolution but its not helping.

i use win7 ultimate.

Thnx for looking

A:LG 32" monitor showing black handles on sides

Try using the 'Auto-Adjust' button on the front of the LCD monitor

2 more replies
Answer Match 62.58%

Hi guys, I have a quick question regarding some games I am trying to play. I just got a new laptop, it's a cheapo - Asus K200MA, 11.6" screen, running Windows 8.1. No graphics card or anything, but it's powerful enough to play older games. I am trying to play Half Life and Elderscrolls 3 Morrowind but I have the same problem with each game. When I start the game I have black margins, approx. 1 inch on both sides of the screen, so it's not displaying in full screen mode. I have tried some fixes like going to screen resolution/advanced/IntelHD Graphics Control Panel/Maintain Display Scaling but it doesn't work. I am not sure if this is a problem with my monitor or with windows 8.1. It's a generic monitor so it doesn't have a lot of options. I've searched for a while but can't find any solutions online. Can anyone help? Thanks so much.

Cheers,
 

A:Games won't play in full screen...black margins on both sides

The only thying I can think of is that your gaming res isnt set to your native desktop res. I know that you said you have looked at this, bu tI suggest checking, see what your desktop res is, and make sure that games have the same setting. I play HL and dont get black margins, so I know that it will run properly.
 

1 more replies
Answer Match 56.7%

Could someone please tell me how to turn these 2.35:1 mpeg4s into a 16:9 without any squishing?

A:Need help with black bars =(

This is a very common question on video forums.

You have to either trim off of the ends in your editor or squish the video Or live with the black bars.

Since I want to see all of the movie I live with the black bars.
This is because 16:9( like a HDTV is 1.77:1, so to fill the screen you have to lose the difference between that and 2.35:1.
do the black bars on the sides of 4:3 video bother you?

Bottom line you can put it through a editor and trim it, losing some quality in the process as well as part of the video. or if you TV set has a Zoom function you can try that.

Found this one: http://en.wikipedia.org/wiki/16:9
There is a image partway down on the right side that shows the various aspect ratios as compared to a HDTV.

Good Luck
Roger

5 more replies
Answer Match 56.7%

When ever i hover over something a black bar similar to the thing stays for a bit and then if i close the page or refresh it its gone please help!

More replies
Answer Match 56.28%

I was messing with my desktop visual features and all of asudden almost everything turned black. I cnt see what im typing right now because of it. My start bar and the top of my IE window is black plus every other defualty windows window. What do i do?
 

A:Various bars and windows black

Please Help!
 

2 more replies
Answer Match 56.28%

Hello,

I need a little help and direction. I have embedded a YouTube video onto our home page. There are black bars above and below it, as well as grey bars to the left and right. How do I remove those? I'm sure there was a setting I screwed up along the way....

What I have done is use Camtasia to record an Articulate presentation. The sound is REAL low as well.

Any ideas would greatly be appreciated.

Thank you!

Dave
 

A:Black Bars around You Tube Vid

The problem seems to be with the video itself rather than the embedded object, to fix it you would have to crop the video yourself. Make sure the video uses either 4:3 or 16:9 aspect ratio such as 480x360 or 640x360, respectively.
 

1 more replies
Answer Match 56.28%

Hi in WMP 12 when watching a video I get a small black bonder (bars) of about4 mm around all sides.
It happens in fullscreen on both 16:9 and 4:3 videos.

I have the video resolution on Windows set to 1080p @60hz and In Windows Media Center it's set to 1080p @50hz.
It does the same for 60 50 30 or 25hz videos. I play a lot of 50/25 hz videos as in Australia.

In other players (iTunes for example) they play with no border (bars).
I would use other players only but want to use Windows Media Center and that uses Windows Media Player features to play videos so I get the same border(bars).

Hopefully someone here can help.

Thanks Kevin

A:WMP 12 Black Border (Bars)

An update: I am going to use Media Center (which is just an interface for Media Player anyway) as I found a way to get videos to fill the screen properly.
I found if I play certain videos twice or 2 different ones (only works on some combinations) then the will go to there correct size.

Like I have a 1080p video of Led Zeppelin which has to be played a second time to go to the right size but my 4:3 videos of The Flintstones will not resize I play them first without using other videos to fix it first.

But I have to do it each time Media Center is closed and reopened.

I hope someone might have a clue what's going on.
I have even repair installed Windows and reset Media center back to defaults.
I have a I7 3770 8gb of ram a 128 ssd and 500gb hdd and a 7700 Series Radeon graphics

Kevin

1 more replies
Answer Match 56.28%

Searching through past postings on the forum I noticed much about black bars, whether side or top, related to gaming. My issue with the bars is not about games but more for example in making 1024x768 fill the screen area. I recently got a new monitor, Acer widescreen, 1366x768, and of course anything less than that shows black sidebars.

So, how can I expand 1024 proportionately (or for that matter 800x600) to fit the screen? Btw, the basic suggestion I've read elsewhere is go to CP-Display and slide to native resolution but that's not what I'm addressing here. What I want - and I know this won't sound the most technical - is the "look" of 1024 (or lower) to fill the screen area. On the old CRT I could switch to any size and there were no black bars.

Thanks for any suggestions.

Dan

A:Black Bars Begone!

What you want to will not work as you'd like to.

Apparently your old CRT display had 4:3 aspect ratio; you could switch to any other 4:3 resolution without distorting the image.

Now your new display has the aspect ratio 16:9. Hopefully this will explain it for you:

Let's take a 1024*768 image:
Showing it full screen on a 16:9 1366*768 display, you have three options. First, change its resolution to 1366*768:
The height remained the same, the width was increased, causing distortion.

Second possibility, to keep image's original size, which leaves the black area either on the left or right:
This is of course only natural as the height of the image remains the same (768 pixels) and the width of the image (1024 pixels) is not enough to cover an area of 1366 pixels.

The last option is to resize the image to 1366*1024 (= same 4:3 aspect ratio than 1024*768) then fill the 16:9 aspect ratio 1366*768 area with this 1366*1024 image, which of course crops the image showing it only partially:
Check the resolution options using Screen Resolution tool (right click on desktop, select Screen Resolution), and select a 16:9 aspect ratio resolution that suits you.

Tutorial: Screen Resolution - Display Settings

Kari

3 more replies
Answer Match 56.28%

Apologies if this topic is discussed elsewhere but I could not locate if so. After installing Windows 10 from 8.1 my Realplayer began showing my videos with a purple blackish border underneath the video and to its right. Irregardless of the setting it remains and previously it showed the videos in its full screen. Currently it is set on Normal mode which is my typical setting but I've tried all the others with no success. I use two 24 inch Dell monitors (S2440L) with a GEForce 210 video card. But the problem came with the new operating system and it changing a setting. Help will be so appreciated.

More replies
Answer Match 56.28%

When rebooting my pc(windows xp pro service pack three) my command bars came back black,some stuff shows thru but way unacceptable,tried rebooting,shuting down all to no avail...HELP
 

More replies
Answer Match 55.86%

a horizontal black bar appears at the bottom of the screen and a white bar at the top

More replies
Answer Match 55.44%

Hi there, i have got a dell 630m laptop but when i switch it on, it shows the windows vista green bars moving then it changes to a black screen. After that i can't do nothing, waiting 1 hour but still stays on black screen. Also i think my hard drive is gone so i wont be able to reinstall or install a new operating system. Please correct me if im wrong. Please help. Thanks
 

A:Black Screen After Loading Bars

rooney222

Hi,

Not sure if it is applicable in your case but I had the exact same problem last week on a Dell XPS Lappy.

Vista loading progress bar ... then nothing.

I was able to start in safe mode with networking, and surf - but never got the desktop to boot in normal mode.

If you wish then check back through all my posts by clicking this link, to take you to the thread I started on 20 Oct.

http://forums.techguy.org/search.php?do=finduser&u=41448

I thought it was a hardware fault, I was given guidance on things to try - but the only thing that got me up and running was a factory restore.
 

2 more replies
Answer Match 55.44%

I've recently re-installed Vista on a friends laptop. Now it has wide black bars on both sides of the screen. How can I resolve this please.

Thank you for any help.
 

A:Black bars at side of screen

6 more replies
Answer Match 55.44%

I am running Compaq Presario CQ61 using AMD M880G with ati Mobility Radeon HD 4200.

I am trying to run certain games on full screen and I get these two black bars on the side of the screens. One emulator I used was "Project 64" and I set some options to make it exactly full screen and it worked.

But as for most PC games like Sims won't really work. Is there something wrong with my graphics card?

A:Black bars on side screens

it's probably the games' settings.
Some games only run in full screen 4:3 mode.

5 more replies
Answer Match 55.44%

Okay, this problem has been irritating me for quite some time now. My issue is this: I open a game called Ultima Online and click full screen with the highest resolution available. My result: a blown up play screen with two bars on each side of my screen about two inches thick cutting off my gameplay. I had this exact same issue with Call of Duty: Black Ops, and changing the resolution to 1080p quickly solved this. I also have a flickering problem with Ultima Online when I enter full screen, which many people have had issues with and few found solutions. A big thing with them is that they use Razor and that causes the flickering, but I do not use Razor... My question is, does anyone know how to fix this or have any suggestions I can try? My operating system is windows 7 64 bit, laptop toshiba qosmio x505-Q880, i7 processor, 18.4 inch HD display with a Nvidia GTS 360M graphics card, so my GPU is not the issue here. My uncle plays Ultima Online as well with the same operating system on a desktop with a 22 inch widescreen 1080p monitor and has no issues at all. the game looks great and works fine. He does use an AMD graphics card, so if there are any Nvidia Control Panel options I could change that would be an easy fix.

Things I have tried:
Reinstalling the game with a fresh download of the client
updating graphics driver (it's up to date)
playing with some of the graphics options in the Nvidia Control Panel, but alot of them I don't know what the do
tried turning ... Read more

A:Black bars on either side of screen

no responses?

8 more replies
Answer Match 55.44%

Can somebody tell me why this is happening from time to time? I have no idea about what the problem may be and I couldn't find it on Google.

I assume that it is something with Windows 7, maybe a corrupted system file or something, please help me out here!!

A:Weird black bars on screen.. help please

Update or reinstall your Display driver from the Support Downloads webpage for the Device maker.

If this fails, check your logs and system resources for clues to OS corruption or hardware problems: troubleshooting steps

Have you done a lot of tweaking or used registry cleaner crapware which almost always corrupts Win7?
If so, clean reinstall adapting these steps to get a perfect reinstall, then refrain from tweaking: Reinstalling Windows 7

8 more replies
Answer Match 55.44%

I've recently re-installed Vista on a friends PC. Now it has wide black bars on both sides of the screen. How can I resolve this please.

Thank you for any help.

A:Black bars full screen

Have you installed the graphics driver for the system.

If so please provide the system specs.

3 more replies
Answer Match 55.44%

Hi all,

When I go to watch a non-widescreen DVD and have my DVD program in fullscreen mode I get black bars down the sides of the screen that are obviously keeping the fullscreen video in 4:3 aspect ratio. Thing is, I have my video card configged to display in full screen. (Catalyst Control Center --> Notebook Panel Properties --> Scaling Options --> Full Screen)....

I don't know if it has to do with the fact that I don't have Dell Media Experience installed on my PC, because as of current I don't have the install disks for that program.... I installed a DVD player off of sourceforge.net which provides me with the decoder, and I use RealPlayer to watch the DVD... If I reinstall Dell Media Experience will that fix the problem, or is there any way to force full screen?

Specs:

Dell Inspiron 6400 Laptop
ATI Radeon Mobility X1300, 256 MB Memory

If you need any other specs, let me know.

Thanks for the help,

-'Mage
 

A:Black bars when watching fullscreen DVD

You need a DVD player, the DELLs laptop usually come with WinDVD or something like that. Don't you have that installed? Or use Windows Media Player 10. I rather use Windows Media Classic you get that off http://www.free-codecs.com/ and it has a lot of free stuff, free... You should contact tell DELL if that laptop is still under protection. Get free access to update your machine you might still be able too?
 

18 more replies
Answer Match 55.02%

Hi, when I play call of duty 1 on my laptop the whole view is crushed leaving 2 black bars on the left and right hand side of the screen. It never used to do this and I am not sure what the problem is. I know it is not an in game problem because the settings are on full screen and the correct video mode. This never used to happen on this laptop so I must off accidently changed a setting. This only happens in game so it is not a screen resolution problem I think. Please can you help me solve this problem??

A:Call of Duty (Black bars ingame)

I don't know what your problem could be, although uninstalling and reinstalling could fix the problem. There is also another possibility. When you right click the shortcut, click properties and find the section through the tabs that lets you run an app as if it were on Win 7 or XP. That sometimes fixes things.

1 more replies
Answer Match 55.02%

Hi there, I have ordered a couple of dvd's that were shot in High Definition * Widescreen *
format, and I am on a 19" inch Monitor. When I play the DVD there is a 1 inch wide black bar on the top and bottom of the screen when I go to fullscreen.

Are there any add-ons or configurations I can do in Windows Media Player 11 to remove these black bars, like a zoom in feature, anything at all. I am using Sonic Cinemax DVD Pack.

Thanks
 

A:Way to remove Black Bars watching a DVD? Any help would be appreciated

ALT+3 is 200%, though that may not be a good idea.

That's the problem with Widescreen, 16x9 will give you those bars.
 

1 more replies
Answer Match 55.02%

I'm not sure if this is a RAM, or video card issue. I've just started seeing this today. Seen it happen in an active and inactive application window like FF. Poppeeper. When I move the bar of the app around (disappearing below the start menu bar) then bring it up again, the problem is gone.

Any ideas which hardware/software is starting to fail?

A:Getting weird vertical black bars in window

Oooooh. This looks like either a driver issue or a bad display card. Is this a laptop or a desktop? If it's an HP laptop, does it have the ATI or the nVidia display chipset? My wife has a recent HP Laptop with the ATI display system and it had been notoriously hard to get working correctly. If you can post that information I'll see what I can do.

Andacar.

3 more replies
Answer Match 55.02%

Every so often, menu text in Adobe Reader becomes blacked out. Restarting the computer temporarily solves the problem.I've linked to a screenshot of this problem. What's the issue?Screenshot: http://imageshack.us/photo/my-images/263/readerblackbars.png/

A:Mysterious Adobe Reader Black Bars

Is it just adobe that this happens to?

4 more replies
Answer Match 55.02%

Hey guys. Lately I've been having this problem with my monitor (or Graphics card, not quite sure at this point) in which there are flashing black bars going across the screen, and I could really use some help. The problem persists usually about every other day, but it has never been quite as bad as this before. Attached and at the bottom of this post is a screenshot of the monitor with the black bars.

I've noticed that this happens more frequently when I play games such as Team Fortress 2 on Steam. The black bars would actually usually start at that point, and I would even find blue pixels laying in spots across the screen at some times. After playing for about an hour the game/screen would either start flickering or a message will pop-up stating, "Input Signal out of range".

I have a second monitor that doesn't have this problem at all, and this all started after I had returned from vacation in Mexico.

Steps I've taken
-Reinstalled and Reverted to old NVIDIA drivers
-Checked for new monitor drivers
-Checked monitor resolution and attempted using the monitor at a refresh rate of 59Hz/s
-Checked and unplugged/replugged monitor cables.

Also, a note: While in some programs (such as Firefox, Office, or Chrome) the black bars seem to have stopped. But going back to the desktop and they're still flashing.

Thanks in advance for any help.

Specs
HP 2709m LCD Monitor
BFG 275 GTX
Core i7 920, @2.66Ghz (Not OCd atm)
PSU is a Thermaltake ToughPower... Read more

A:Flashing black bars across monitor? (W/Screenshot)

How is your graphics card connected to your monitor?

VGA, HDMI, DVI?

You may have a faulty video cable.
 

3 more replies
Answer Match 55.02%

Well I have been having issues with my monitor. I'll give you a bit of what is going on. I had a Toshiba laptop I had hooked up to my monitor, everything worked great. It then crashed, I got a new Dell with Windows 8 64bit and Intel graphics. I have an HDMI to VGA adapter cause my laptop doesn't have a VGA port and monitor doesn't have HDMI. So I hook it up and get it to work but "Input Not Supported" was floating around the screen. So I changed the resolution. The only resolution that makes the "Input Not Supported" to go away is 1600X200. Well its clear picture but I have the annoying black bars on the side of my screen. I have looked around and everyone says to go to the CCC but I can't find it on here and from what I understand that is for AMD only(if I'm mistaken please explain to me how to make it work cause I have attempted it). So is there an Intel version or how do I fix it?

A:Monitor with Black Bars HDMI Problem......

Does anyone have a suggestion or some advice on this?

7 more replies
Answer Match 55.02%

It would be nice if someone would've helped me to remove those black bars under my desktop icons. Here's a screenshot.

A:Remove black bars under desktop icons

http://www.mvps.org/marksxp/WindowsXP/boarders.php

6 more replies
Answer Match 55.02%

I got a Sharp TV, 32" LC32GP3U-B (1080p full). I connected an hdmi cable from my laptop (1080p certified) to the TV.

BLACK BAR TV OUTPUT PROBLEM

I do not get the full screen output on my TV when connected via HDMI. The TV itself works fine in full screen (1080p). I DO get full screen output on any Linux o/s I test it with, via hdmi such as Ubuntu. However, I prefer to use Vista instead in order to use MCE and the plug-ins I have (Netflix, Joost, etc plus MCE remote). I duplicated this before and after upgrading to Vista SP1. I've duplicated this with many WHQL certified NVidia drivers as well. Literally about 10 different driver versions for my 8400M GT card. I cannot figure out why it is not showing full screen output, but I can confirm this happens in Vista only, not Linux (did not and will not test in XP). My index score in Vista is 5.3.

Nvidia panel shows proper 1920x1080 resolution.

Some drivers I've tried and duplicated the same problem:

174.93
175.12
167.43
163.75

Also, my TV settings are certainly proper since I do get full screen output in Linux and general TV viewing. I did try several new HDMI cables too, but thats irrelevant since it works fine in Linux.

Summary of settings / methods to fix the problem:
- 1920x1080p resolution (59 and 60Hz, same black bar problem)
- various Nvidia drivers
- Nvidia nTune overclocked (but keeps resetting back to factory on reboot)
- disabled aero interface in Vista

Hardware / Software:
Sharp TV 32" LC32... Read more

A:1080p hdmi > tv out shows black bars

6 more replies
Answer Match 55.02%

When I open up Internet explorer the menu, favourites & command bars are blacked out. What causes this and how do I correct it?
 

More replies
Answer Match 55.02%

Hellp, my screen will not properly display the 800x600 resolution without stretching the screen and making it blurry. This started after i used an hdmi to connect to my tv. Normally there are black borders that keep the quality the same but now the screen stretches it to a 1366x768 resolution, which makes things blurry.

A:Black bars disappeared on 800x600 resolution

hello again, the problem was solved by right clicking on the desktop and pressing graphics properties, then basic mode, then putting scaling on "center". hopefully this will help other people in the future

1 more replies
Answer Match 55.02%

I am trying to watch video on my 22" widescreen lcd. For some reason the video won't stretch and cover the entire screen.

The video used to do that; now it won't. I don't know wtf happened. There are annoying black bars on the left and right of the video now. I've tried uninstalling + reinstalling ffdshow, and fooling around with aspect ratio, but I can't get it right. Is there something in WMP11 settings that I may have reset somehow?

I'm watching xvids using Ffdshow and wmp11.

Any ideas?

To summarize: I have black bars on the left and right of the video now. I would like it to stretch.

Thanks
 

More replies
Answer Match 55.02%

Hello,

I run ZoneAlarm and today I started getting popups regarding SUSPICIOUS BEHAVIOR "dabanu is trying to launch C:\Windows\SysWOW64\mshta.exe". I click deny, which is actually just a black square but know the position of the deny button, but it continues to pop up ever 15-20 seconds or so. MS Security Essentials is currently in the process of running...somehow its the only program that I can see the interface and is not completely black...although the title bar is. I can get to my task manger but it is essentially a black box.
Any help would be greatly appreciated!

Thank you in advance.

A:mshta.exe All menu bars, buttons...etc are black and I can see what they say.

I left off the end of the message:
"dabanu is trying to launch C:\Windows\SysWOW64\mshta.exe, or use another program to gain access to privileged resources"
Thanks again.

3 more replies
Answer Match 55.02%

Can somebody PLEASE tell me how the hell to get rid of them? I've already tried stretching the screen horizontally but the desktop icons go inside the black bars and the black bars still stay there
 

A:Those black bars on left and right side of your screen!

By using the monitor adjustments. If it's a 14 or 15" older monitor you are probably stuck with it.
 

1 more replies
Answer Match 55.02%

I got a Sharp TV, 32" LC32GP3U-B (1080p full). I connected an hdmi cable from my laptop (1080p certified) to the TV.

BLACK BAR TV OUTPUT PROBLEM

I do not get the full screen output on my TV when connected via HDMI. The TV itself works fine in full screen (1080p). I DO get full screen output on any Linux o/s I test it with, via hdmi such as Ubuntu. However, I prefer to use Vista instead in order to use MCE and the plug-ins I have (Netflix, Joost, etc plus MCE remote). I duplicated this before and after upgrading to Vista SP1. I've duplicated this with many WHQL certified NVidia drivers as well. Literally about 10 different driver versions for my 8400M GT card. I cannot figure out why it is not showing full screen output, but I can confirm this happens in Vista only, not Linux (did not and will not test in XP). My index score in Vista is 5.3.

Nvidia panel shows proper 1920x1080 resolution.

Some drivers I've tried and duplicated the same problem:

174.93
175.12
167.43
163.75

Also, my TV settings are certainly proper since I do get full screen output in Linux and general TV viewing. I did try several new HDMI cables too, but thats irrelevant since it works fine in Linux.

Summary of settings / methods to fix the problem:
- 1920x1080p resolution (59 and 60Hz, same black bar problem)
- various Nvidia drivers
- Nvidia nTune overclocked (but keeps resetting back to factory on reboot)
- disabled aero interface in Vista

Hardware / Sof... Read more

A:1080p hdmi > tv out shows black bars

Hey, Chad, have you obtained the official drivers for your laptop video card *from your laptop manufacturer*? Some laptop manufacturers have limited their machines to only use their own drivers....

2 more replies
Answer Match 55.02%

The HP 4500 Envy all-in-one printer is new, replacing a defunct Canon Pixma. I received an electronic 1099 form, and printed it from my Foxit Reader program. To my dismay, the printed form was obscured by black bars in 4 places. These do not show in the print preview, and after experimenting for some time, I can find no setting that accounts for the problem. I went online and tried reprinting the 1009 form from last year. The same problem occurred, but my hard copy in last year's records ? printed from Foxit but using the old Canon ? did not have the offending black bars. So far this is the only pdf with which I have a printing problem, but the fact that it occurs with the same form for two different years is puzzling and annoying. Any thoughts or help would be appreciated!

A:Black bars on printed pdf witih HP 4500e

Considerable time online with HP support which included remote access to my computer was unable to resolve this issue. The tech seemed to believe that it was related to the site hosting the 1099, even though the same form had printed without problem from my previous printer. If the problem develops on any other form/pdf, I will have to explore this further. For now, however, printing the screen capture of the pdf will suffice.

1 more replies
Answer Match 55.02%

I saw a similar posting on this site in January describing the exact problem I am having. The posting has since closed. No solution was given other then to use another printer. I only have one printer. I am having a problem printing a large pdf document using my Win 8 computer. Black rectangles appear randomly on the printed pages. The printer cartridge is relatively new. The print preview does not show any black rectangled areas, and the document prints perfectly fine on my Vista machine. Please advise.
 

More replies
Answer Match 55.02%

This has never happened before. I went on vacation last week and figured i would turn my computer off to save power. So i did. When i came back and turned on my computer after a week, i saw these slanted black bars with little stripes of screen through them, they were slide up and up and up, over and over, very fast. I got to the setup screen where all the information for the computer is at (Bios, Ram, CPU speed, etc.) and it stopped. I go back into windows and it started again right when i get to the windows loading screen with the blue bar and windows icon. After about 5 to 10 minutes it wears off for some reason but every time i turn my monitor off, or it goes to power save mode and i turn it back on, they are there again for another 5 minutes. What is this and how can i fix it?
 

A:Monitor giving black bars at top of screen.

Make sure all connections are tight from the monitor to the computer. Try another monitor to eliminate either the computer or the monitor as the cause of the problem
 

1 more replies
Answer Match 55.02%

Like I mentioned before in my last post I acquired another Tower, but Im using an old RELISYS 16' monitor with this system, ok anyway, I was wondering why I have black bars on both sides of the monitor the picture is not filling the whole screen I have looked behind the monitor for an adjustment and in front of it also, and cannot find an adjustment for it, and i have removed the monitor from the device manager and rebooted and let windows install the best one, do I need to search from Drivers for this?, the Resolution is set at 640x480 and I'm not sure what the Refresh rate is set at, could this be a problem also.thanks for the help.

------------------
ICQ# 51865388
AOL IM daveandrew v1

 

A:Monitor Problem....Black bars on each side

7 more replies
Answer Match 54.18%

hey all, i recently updated a vista 64 machine to 7 64. Its win preminum. and i have a ATI HD3200 onboard memory, but it is dedicated, and i am running all the up to date drivers for EVERYTHING. my problem is this, if i change the resolution, i get black bars instead of like it would used to strech the screen to fit, now its black bars like your watching a wide screen DVD on a regular tv. so because of that, in Games its like that too, and for somereason now Left for Dead 2 wont even run, when everything was working with vista. Help please.

Thanks

A:Black bars on screen when changing resolution / gaming

You may have to adjust the overscan/underscan setting in the ATI Catalyst Control Center. This thread may be of help to you:http://forums.amd.com/game/messageview.cfm...threadid=121065

1 more replies
Answer Match 54.18%

Black bars appear on text, resulting in me not able to see text. If I restart my laptop, it won't appear for a while but return at some point. I've scanned for virus' countless times, malware scans, etc. I do not have a system restore point to go back to. Wireless connection. Problems started occuring after Windows 10 anniversary 1607 update., but unsure whether its to do with the update. However I do think that the update has caused servere fps drops in games. For example, CS:GO used to run at 70-100fps, but now it runs at 30-40 fps. This has crippled my gaming experiance and I've also tried many things to resolve that issue, with no resultions.

More replies
Answer Match 54.18%

I am having the exact same issue.  I have two identical laptops, purchased on the same day, that are both having this issue. A soft boot (restart) seems to clear it up.  Many times it seems as though a hard boot will NOT fix it.  Tool Tips in the notification area are affected.  Drop down menus look ok until you point to something, then that item is illegible.  I pressed Ctrl + Alt + S to get the information below, and I could not read any of it.  I was able to copy and paste it though.
 
Seems to be happening more frequently in the last couple of weeks, has been going on for a few months now.  Maybe since the Anniversary Update, but I can't be sure.
 
Don't have an external monitor to try. 
 
Product name:HP Pavilion Notebook
Product number:T0D95UA#ABA
Serial numberremoved content)
Software build ID:15WW3CGT601#SABA#DABA
Motherboard ID:80A1
Feature byte:3Q6b7K7M7WaBapaqasauawbhbpbzcbdUdXdpdq.Aq
OS version:ML
Service ID:20160214
BIOS:F.82-08/18/2016
Keyboard revision:91.1E
Total memory:8.00 GB
Processor name:Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz

A:Re: Weird Black Bars and lines on text/font

Is it ok piggy-backing on this thread, or do I need to start my own?  I'm not getting any responses...

2 more replies
Answer Match 54.18%

Recently media player stopped playing avi's (other movies ok). After a day of tinkering I decided to do a fresh Windows 7 install using my fairly new 2nd HDD (previously used to test Windows 8). I used the USB install method from this forum. Bizarrely media player didn't work at all on the new install (media player has stopped working message). With repeat installs, everything else seems ok except media player. The best I've managed is to get media player working, but adding black letterbox bars top and bottom (see attached jpg). Updates usually make this half working wmp stop all together.

Things I have tried -

disable overclock
different USB pen drives
different iso (from links in this forum)
using onboard graphics instead of Radeon HD card
with/without gfx drivers
with/without MS updates
brand new HDD
sfc /scannow

also -

media center plays tv ok, as does media player classic

the system, a pre-overclocked bundle from Aria in UK, has a huge cooler and good psu and has been running @ 100% (rendering C4D) since new. I've has a couple of BSODs in total that I put down to overclocking (ok on restart), but I'm wondering if I have a motherboard fault - although I can't think why this would only affect media player.

One more thing - when I first built this box I had trouble installing Windows 7 BSOD etc. I turned the overclock off and install went ok. Turn o/c back on and worked fine. Maybe I've had a mobo fault all along?

I was thinking of a BIOS update, but although I can ... Read more

A:Media Player adding black bars + other probs

Have you tried the fixit center? : Microsoft Fix it Solution Center: troubleshooting software issues

Just a quick thought, might help.

5 more replies
Answer Match 54.18%

New here. I have a Windows 7 machine that upgraded to WLM 2011 not too long ago. However, since that upgrade, after using WLM for just a few minutes, top and side navigation bars disappear and just become black (see attached). Launching a new e-mail also shows black top and bottom borders. Shutting down and restarting WLM restores everything until you start moving around in WLM again.

Has anyone seen this behavior before and have an idea what might correct it? It never occurred before the upgrade to WLM 2011 and it doesn't occur anywhere else. The machine and installation is a vanilla Dell PC with OEM Win7 Home Premium, nothing fancy.

Thanks.

A:Losing Navigation Bars (black borders) WLM 2011

You could try a repair install via Programs and Features>>Windows Live Essentials. If you choose "repair" it will repair all downloaded components of Essentials, including Mail. I believe the repair should be done anyway since the Junk Mail Filtering won't work properly until the repair is run.

4 more replies
Answer Match 54.18%

I bought a replacement LCD for my neice's Compaq Presario CQ50-139WM. I installed it carefully. (I even reinstalled it two more times!) Now, the Windows desktop only uses most of the display, with a 3" bar on the right side and a 1/2" bar on the bottom.

It appears that the desktop is nearly square. I have a Mobile Intel® 4 Series Express Chipset Family. The only two resolution options are 1024x768 and 800x600. Both options fill up the same space. It's like it gave me a smaller monitor than what I actually have.

Further, the bottom black bar stretches out the mouse curser and start button. THe start button bottom streaks over the 1/2" black bar, and when I get the cursor at the bottom of the desktop, it streaks over the 1/2" black bar also.

These black bars are occurring BEFORE Windows boots up. The black screen on startup has a Compaq logo, and it's clear that everything is shifted to the left.

I've made sure that I've updated everything that is possible, but I suspect it's not a software issue. Any ideas?
 

A:Replaced LCD on laptop, now I have black bars and square screen!

Have you updated the BIOS? You may need a new screen. You can RMA it and they will take it back. It may be a common thing and will get an answer faster if you call HP. Hope this helps.
 

1 more replies
Answer Match 54.18%

Hey after i reboot computer yesterday i got these black bars interlace. So i decided to format my pc. And i did that but after the clean install i still got these anoying black lines. its Only comes when i switch from windows basic to some aero themes. I never had that problem before. Hmm anyone who knows the problem ?

They are kinda annoying so please help

//



Blackbars interlace Aero ?

Video with my anooying Interlace problems



PC Specs

Amd phenom Quad core 3.20ghz

4GB Ram Corsair

150gbs Harddisk

120Gbs SSD Corsair

A:Anoying black bars interlace Windows aero ?

  
Quote: Originally Posted by willworrior


Hey after i reboot computer yesterday i got these black bars interlace. So i decided to format my pc. And i did that but after the clean install i still got these anoying black lines. its Only comes when i switch from windows basic to some aero themes. I never had that problem before. Hmm anyone who knows the problem ?

They are kinda annoying so please help

//



Blackbars interlace Aero ?

Video with my anooying Interlace problems



PC Specs

Amd phenom Quad core 3.20ghz

4GB Ram Corsair

150gbs Harddisk

120Gbs SSD Corsair


From the video, it appears you are referring to the empty space in the action bar (blank space on the right). What are you using for your video; on board or separate graphics card? Reply back with info.

Additionally, you may check the following website for some suggestions;

http://windows.microsoft.com/en-us/windows7/Diagnosing-basic-problems-with-DirectX

9 more replies
Answer Match 54.18%

This has never happened before. I went on vacation last week and figured i would turn my computer off to save power. So i did. When i came back and turned on my computer after a week, i saw these slanted black bars with little stripes of the screen through them, they were flickering very fast. I got to the setup screen where all the information for the computer is at (Bios, Ram, CPU speed, etc.) and it stopped. I go back into windows and it started again right when i get to the windows loading screen with the blue bar and windows icon. After about 5 to 10 minutes it wears off for some reason but every time i turn my monitor off, or it goes to power save mode and i turn it back on, they are there again for another 5 minutes. What is this and how can i fix it?

by the way, these stripes re appear when i go into certain games or a website with a dark backround, they dont show up with Call of Duty 4 but they do with Overlord. In Overlord they will go away when i look up at a bright sky but re appear when i go into a dark area... its so annoying, i cant play with them there...
 

A:Monitor giving flickering black bars at top of screen.

What do you have LCD ? If so, turn off pc, turn off monitor for 30 minutes. Then give her another try.. GL,,
 

2 more replies
Answer Match 54.18%

ive had my comp for about 2 years now (with the same monitor) and recently i noticed my screen.. shrink.. lol... i just went to my monitors settings and streched it out.. no problem.. maybe 2 days later.. it shrank again.. this time leaving 2 black bars on the left and right side of my screen as what its receiving (i can make it so i can shrink what windows is displaying and i can still see to lighter black bars to the left and right side then what is completely black from what the monitor is blanking out) so i figure its a video card problem (radeon 9200 pci), my windows xp is messing up, or my monitors messed up.. help
 

A:black bars on left and right hand side of monitor

6 more replies
Answer Match 54.18%

I have the exact same problem. Just bought a new HP laptop like a week ago and the problem is exactly the same. Has a fix been found for this? I read this topic and searched for updates, only update was a Windows 10 update and I installed it. The problem seemed to be fixed but after a couple of hours it appeared again. 

A:Re: Weird Black Bars and lines on text/font

1 more replies
Answer Match 54.18%

I purchased a new HP Notebook 1 week ago and have experienced recurring obscuring black bars and odd defacing of lines of texts.  This occurs in Internet Explorer, my email program (AOL) and also in Microsoft WORD.  I performed a system restore that this eradicated the problem for a few days.  Then, Windows 10 forces upgrades, and the problem reappeared.  Then, I altered Windows 10 to the default program build, and that also eradicated the problem.  Then, 2 days later, the problem appeared again.  I have difficulty believing that HP, a reputable company, and the builder of my last 3 computers, would release a product with pre-loaded software that would do this.  I would appreciate knowing how this display "bug" can be permanently corrected.  Otherwise, will I be facing restoring the windows operating system twice a week throughout the next 3 years of ownership?

More replies
Answer Match 54.18%

Hello,
recently after a windows update that did not install successfully every time i turn on my computer it would go completely black after the green loading bars and stay that way the whole time.

Ive tried safe mode but it still goes to the black screen and tried start up repair but i left it on for 10 hours and no progress. Also tried recovery to a earlier point but could not due to an error of corrupted files.
Tried bootrec /fixboot , bootrec /buildbcd but that did not work either
Using System restore, it goes to a blue screen and freezes
thx in advance for any help

A:Vista Screen goes black after green loading bars

Diagnose your hard disk any good tool Bootable Hard Drive Diagnostics - Vox

1 more replies
Answer Match 54.18%

Hi,

Just upgraded to Win7 from XP.

I've got an HP Deskjet D4360. I downloaded the latest print drivers from HP and installed all that.

However, printing anything without margins set (EG Emails from Outlook, or Web pages) the text on all four sides of the document will be cut off. See below - the first couple of letters are missing from the left of all paragraphs. And the "1" is missing form the "Page 1 of 1" on the right.

So it looks like Windows just need to scale down the whole page a bit....

Any suggestions???

A:[SOLVED] Printing - text gets cut off at sides

If you go into the printer main panel there should be an option to align or to realign. sometimes it's just two dots that move and you stop it when they're right over each other. Is this a new printer?

4 more replies
Answer Match 54.18%

I recently purchased a new CPU AMD Athlon 1.6G processor. It has 256MB RAM and a Nvidia 16meg TNT2 Vanta Card graphics card. The monitor I am using is a Samsung Synmaster 753DF.

After installing Win 98 SE and the supporting drivers, I noticed horizontal bars appearing in the video. It is most notable when there is a white background with black letters.
I have done the following:

---- Updated the video driver with the latest available from Nvidia, without success.

---- Replaced the Nvidia 16meg TNT2 Vanta Card, with another Nvidia 16meg TNT2 Vanta Card, without success.

---- Run all the Win 98 diagnostics with no problems being detected.

---- Installed an updated driver for the monitor.

My research indicates that Data Digital Channel (DDC) automatically setups the display frequency without
loading video driver. The solution was to turn it off, or change settings of monitor type in your system.
I have not found away to turn it off.

I have run out of ideas. Any help solving this problems would be greatly appreciated.
 

A:Windows 98 SE Video Display Problem (Horizonal Bars)

10 more replies
Answer Match 53.76%

Dear fellow LENOVO users,I have recently encountered problems or rather peculiarities with my relatively new Lenovo laptop (LENOVO 500S-14ISK);whenever I'm working on it and switch to another tab, there is a chance of random black stripes and dots occuring in the screen. Not (yet) to the extend that I cannot work on it and when I switch tabs again they are gone from the previous tab.Screenshots of the problem attached.I am just wondering what might be the cause and if I should be worrying myself about future defects. (especially since my warranty is till february 2017)Thank you all for your time!Yours,Kevin




CPU i5-6200URAM 8GSSD 256GOS Win 10 HomeLenovo Ideapad 500S-14ISK






















Lenovo laptop screen problem2.png ?270 KB

A:Randomly occuring black dots/bars in screen - LENO...

Added a 2nd screenshot.




CPU i5-6200URAM 8GSSD 256GOS Win 10 HomeLenovo Ideapad 500S-14ISK






















Lenovo black stripes in screen.png ?109 KB

1 more replies
Answer Match 53.76%

I recently purchased the Acer Aspire E 15 E5-575G-53VG 15.6-inch Full HD Notebook. Shortly after buying it, these black marks seemingly randomly started to show up on the screen. I can't seem to identify a pattern of when it happens, but it's pretty constant at this point. Does anyone know what's going on with my computer? Is it something i can fix or should I try to return it? 

More replies
Answer Match 53.76%

As the title I just can't seem to get rid of them and they move from side to side ever so slightly. I don't have the problem on my Windows 7 machine. I've a AMD R7 video card if that is any help.

More replies
Answer Match 53.76%

I have written the same thing in 10 colums in word 2007 but they
do not come out straight or inline with each other.

Example : As you can see they are not inline...Ignore the dot its the only way how to show you

It Looks Like
It Looks Like
.It Looks Like
It Looks Like
.It Looks Like
 

A:Solved: How do i set my paragraphs to be a straight and even line on both sides of th

16 more replies
Answer Match 53.34%

Dear Tenforums users,

I have recently encountered problems or rather peculiarities with my relatively new Lenovo laptop;
whenever I'm working on it and switch to another tab, there is a chance of random black stripes and dots occuring in the screen. Not (yet) to the extend that I cannot work on it and when I switch tabs again they are gone from the previous tab.

Screenshots of the problem:

I am just wondering what might be the cause and if I should be worrying myself about future defects. (especially since my warranty is till february 2017)

Thank you all for your time!

Yours,

esmorax

More replies
Answer Match 53.34%

In the picture i have included you can see an orange color side edging on my home page. Is this normal or can it be made to fill further? http://img442.imageshack.us/my.php?i...eensizeol3.jpg

More replies
Answer Match 52.5%

Recently installed Win8. Had trouble in the beginning and had to refresh. Did so and lost a lot of programs but the internal files were still there. Got back up and running and reloaded programs. Recently, my display would flicker to black and then come back on. Message would appear saying that the display had crashed and fixed itself. Did this three or four times. Today I was exiting from a game and the screen went black. Now it just stays black. I've turned the laptop off/on, but no display. Sort of at a loss now. Power lights, etc., all come on, just no display.

I realize this may not be a Win8 problem and may be hardware issue. Any ideas?
 

A:Solved: Black Display in Win8

6 more replies
Answer Match 52.5%

Hello!

Just bought a new Cisco e1200 router last week. When i first hooked it up, it was giving me extremely low (significantly lower than my old router) downloading speeds. After switching the networking mode from "mixed' to "Wireless-G only", the speeds went back to normal. I tried "Wireless-N only", but it didn't work after that. Seemingly, my computer does not work with Wirless-N?

It's been running okay now, but 2 things happen occasionally:

When playing a game, I experience lag for a period of 5 minutes, or sometimes 20 minutes. It goes away on its own. Never happened with my old router.
When surfing the internet, pages will refuse to load. The connection bars shown at the bottom right hand corner of my computer display a yellow triangle with an exclamation point. This goes away on its own after about 4-5 minutes.

These problems come randomly every 3-4 or days, maybe a bit longer. Is there any way I can fix these issues?

Thank You to anyone who answers!
 

A:Internet won't work. Connection bars display yellow triangle with exclamation point.

6 more replies
Answer Match 51.66%

Hello, I am not 100% sure where to post this. But as my computer is a Windows Vista, I'll try here.

When I attempt to edit videos using Cyberlink Powereditor, the videos appear black with working audio.
Same scenario happens if I compress videos with WMM, and then attempt to watch them. Black screen, clear audio.
I've had this problem for quite a while.
Attempts I've done to fix: Codecs, different media players, and updating graphic driver.

A:[SOLVED] Display Issue, Black screen with Audio

Problem solved. If anyone else is experiencing the same problem, my graphic card is "Nvidia geforce 9600 gt"
I simply "rolled" it back to an earlier version instead of "updating" it.
Then it didn't work, so I reinstalled it manually by using nvidia's download page.
Now it works perfectly, and I can edit anything in cyberlink powereditor.

2 more replies
Answer Match 50.82%

Hi guys. I've searched over the forums for a similar problem and I've found that people say to boot in safe mode. The problem with that, however, is that I only get a black screen when I start up and don't know how I would boot in safe mode. This started after I updated the display driver. Reformatting would not be an issue if someone could explain how to do it without being able to see. Thanks.


I'm using Windows XP Home Edition.

A:[SOLVED] Windows XP - Installed New Display Driver and now only get a black screen on

Booting into Safe Mode is done during the initial boot stage by pressing a key (as per your manual) - are you not seeing ANYTHING during boot (the Bios screen)?

9 more replies
Answer Match 50.82%

For whatever reason, my signal strength seems to consistently drop, but only when I'm in my basement. I have perfect signal strength when I'm upstairs. Strangely enough there never used to be a problem and it just started out of nowhere. I want my internet speed back, it's frustrating, can someone please help me!?

I have a Dell Inspiron 7377.

A:Signal Strength Drops Constantly From 5 Bars to 2 Bars

It depends on where the Wireless Access Point is located, and how many other A/P's are on the same channel(s) as the Access Point. Also if the power is dialed down on the Wifi, that can also cause issues.

4 more replies
Answer Match 50.82%

I was working tonight, and suddenly, while using powerpoint, after switching from google chrome the title bar and the tool bar all became very big. It also affected every desktop application I have. Please, please help me fix this.
This is how my powerpoint looks like right now.
here is my outlook.
I would really appreciate the help!

A:Can I get some help with my Windows 8.1 interface (All the title bars and tool bars became too big!)?

You need to change screen resolution I think same things happened to me a few times

4 more replies
Answer Match 49.98%

My daughter changed the display setting to option 2....now the screen is blank. How can I change back?
 

A:Display is black...daughter cahnged display in CNTRL Panel...how do I changeit back?

Boot to safe mode and:
Change the display settings, or
System Restore.
 

1 more replies
Answer Match 49.56%

I started having issues yesterday, the day after I installed teamviewer a program that is on my iPad also to remotely control the laptop. At first the screen started freezing when I was in the middle of a Java game. So I restarted the laptop only to have it freeze at the main screen (after login).

The screen would freeze the display would change to a very low resolution (I think). So I kept restarting it only to repeat. Until eventually once past the windows logo the screen would turn black and blank. Sometimes the display would turn on black and blank and other times it would do that after the logo.

A few times I managed to get it to go into safe mode and I restored to a few days ago but it made no difference, I also tried many other things like changing some settings but nothing worked.

So after like 2 or 3 hours I Rolled back and disabled "nvidia quadro nvs 135m" (since I read it might be causing the issue and I should uninstall it which I couldn't), once I disabled it I restarted the computer and made it to the main screen without issues, and I could even load my game. I enabled it again And restarted the computer only to have the same issues so I disabled it again after finally getting into safe mode.

I don't know if it works fine now, I left it on at most for 5-10 minutes without any issues and I never actually logged into the game to see if it works.




I figured out that in my display settings instead of showing my main monitor it only sho... Read more

A:Display screen black and blank- is mobile pc display the issue?

Hi ... Welcome to Seven Forums ... Does your Laptop have dual Graphics ... If that is the case go to Dell Website and Download the Driver there for your Graphics ...

I would also suggest you read the Link below ...
NVIDIA Drivers - Avoid Problems

1 more replies
Answer Match 49.56%

This happens as soon as the VGA adapter is plugged in. Unplugging it does not turn the laptop screen back on. Toggling with the function keys does nothing. Since I cannot see anything I cannot try to adjust/correct display settings (or do anything for that matter, other than turn the laptop off by holding power key down).

The second display works (tested with a different laptop).

History: The external display worked fine with this laptop. We had a power failure yesterday which turned it off. The screen toggled to the laptop successfully (or I did, with the function keys--I don't remember) and I continued working. When power returned I started running into this issue. I reinstalled the display drivers from the original manufacturer disc but the problem persists.

msi A4000, Celeron dual Core T3100, Windows 7 Ultimate x64
NVIDIA? MCP79MVL, GeForce? 8200M G, Shared
External display: Acer LCD, AL 1916C

A:Laptop black when external display plugged in, #2 display also dark.

To shut down properly hit the Winkey, then the right arrow, then Enter.

This may be as simple as capacitors overcharged. Shut down, unplug, remove battery. Hold power button down for 20 secs.
Do same for monitor.
Then try.

2 more replies
Answer Match 48.72%

Hello!

Just bought a new Cisco e1200 router about 1.5 months ago. When I first hooked it up, it was giving me EXTREMELY low download speeds (only on wireless, not while connected through ethernet). After switching the networking mode from "mixed' to "Wireless-G only", the speeds went back to normal. This is just info that might help you determine source of this problem:

My internet at times refuses to work, and the connection bars in the task bar display a yellow triangle with an exclamation point inside it. This goes away when I unplug the router from the power and replug it.

I took a screenshot of "ipconfig /all" during, and after the problem. Also, does the problem have anything to do with me setting the networking mode to Wirless-G only? What should I have it set to?

Ipconfig /all DURING problem(not working):
Ipconfig /all AFTER problem(working):
Any help would be appreciated! Thank You!
 

A:Internet not working, Connection bars in taskbar display yellow triangle with "!"

Just bought a new Cisco e1200 router about 1.5 months ago. When I first hooked it up, it was giving me EXTREMELY low download speeds (only on wireless, not while connected through ethernet). After switching the networking mode from "mixed' to "Wireless-G only", the speeds went back to normal.Click to expand...

sounds like a faulty unit - have you tried to get replaced under warranty ?

Also, does the problem have anything to do with me setting the networking mode to Wirless-G only?Click to expand...

should not make a difference - just means only devices with a wireless G or N adapter can connect and the speed will be set to 54mbps max

can we see the following three ping tests and xirrus screen shot - when its working and repeat when disconnects
------------------------------------------------------------------------
Ping Tests
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

Start> Run {search bar in Vista/W7}> type CMD to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

Type the following command
Ping 192.168.1.1.
Post back the results in a reply here
right click in the command ... Read more

2 more replies
Answer Match 47.04%

The picture i`ve included shows an orange edge on the sides. Is this normal or can it be changed?http://img378.imageshack.us/my.php?image=screensizeik0.jpg
 

A:Solved: Home page not filling page on sides

6 more replies
Answer Match 46.62%

I already have the issue that when I put my E5570 to sleep and wake it up again that the keyboard and touchpad do not work. So I have disable the sleep options in the BIOS.
Now I run into different issues.Yesterday I booted the laptop and it hang on the DELL logo, After a while it stated that my EFI file would not be correct. Force reboot and it booted straight to Windows.
What's more annoying is the fact that the laptop boot, the DELL logo is shown and then the screens go's black, as if it's not connected. SO it looks like it hangs.BUT an external monitor through HDMI does work and show the windows logon.The keyboard and touchpad also do not work.External mouse and keyboard do work.
So pretty much I got a brick when I do not have external display/keyboard and mouse available.
When I reboot the laptop it works fine again.Am I the only one with this?Loads of issues with the laptop and wondering if I just have a faulty laptop...
Clean Windows 10 Pro install is done 5 times.Used the  DELL Command Update to install all drivers and patches.Issues keep existing...

A:Latitude E5570 - Black display, no resons to keyboard/touchpad - External display/keyboard/mouse do work

I have been spending a lot of hours in troubleshooting this week.
Diagnostics are 100% ok.
Reinstalled Windows 10 about 15 times.Installing drivers by hands, installing drives trhough the dell update management application.The issues keeps existing.
To sum the them up:- Cold boot (laptop is off) to Windows. Keyboard/Touchpad do not work. (Reboot and they work again)- Resume from sleep. Keyboard/Touchpad do not work. (Reboot and the work again)
After I got the laptop I installed 32Gb of RAM and an 512Gb Samsung 950Pro PCIE M.2 NVME drive.The drive should be support as Dell states on the product page and in the manual that PCIE with NVME is supported.
"Advanced features, like industry-leading M.2 SATA and M.2 PCIe/NVME solid state drives, provide data transfer speeds up to 4x faster over traditional hard drivers. "
In order to get the drive visible and running on PCIe I had to disable the sata controller in the BIOS.This way the drive is detected in Windows as an PCIe NVME capable drive.
Just to verify if the issues I went back to default with the delivered 256Gb M.2 sata drive and 8Gb RAM.To install Windows I had to turn the Sata controller back on.
Installed the drivers manually updated WIndows and tested.The issues do NOT occur.
Retested by installing the drivers using the Dell Update Application.The issues do NOT occur.
So I figured out that the SATA controller somehow is the guilty part for all the issues.I mean when enabled to ACHI or RAID the sleep and non... Read more

9 more replies
Answer Match 46.2%

I cant figure out how to move my Menu Bar (File, Edit, View, etc.) to the top of IE7. I have unlocked the tool bar but cant figure out how to move anything. I would prefer to move the address bar to the bottom as well. Any ideas?
 

A:Solved: IE7 Bars at top...

I don't think you can
 

3 more replies
Answer Match 45.78%

I have an internet access problem on a grandson's Dell laptop. The wireless signal is strong, 5 bars and 54meg, but can't get to the internet unless I plug the CAT5 cable in directly in which case it work fine! Problem occurs on my Actiontec modem/router combo AND my grandson's Lynksys router in two different homes with different ISP's (ATT and Surewest).. Other PC's communicate wirelessly just fine on both routers. I re ran the Windows Network Setup wizard with no improvement. I'm using the Dell supplied wireless config. util to manage the wireless connection. This worked fine from the time the laptop was new till a month ago.

Suggestions?
 

A:Solved: 5 bars but no internet

What non-Windows firewall or security suite is, or was, on the machine?

For a wireless connection please show ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

2 more replies
Answer Match 45.78%

Hi guys, long time no see

My problem is that I bought and downloaded some NCH software. I did not untick the NCH toolbar. Now I can't get rid of it. I tried all the usual ways to uninstall, Add and remove program's etc, etc, I checked on the Net and a lot of ppl cannot remove this toolbar.
Can you 'wizzkids' come up with anything??

thanx in advance flasharry.

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Celeron(R) CPU 2.66GHz, x86 Family 15 Model 4 Stepping 1
Processor Count: 1
RAM: 2046 Mb
Graphics Card: ATI Radeon X1650 Pro, 512 Mb
Hard Drives: C: Total - 76308 MB, Free - 19762 MB; F: Total - 32253 MB, Free - 4757 MB;
Motherboard: , P4M800CE-8237, ,
Antivirus: Virgin Media.
 

A:Solved: tool bars

13 more replies
Answer Match 45.78%

I'm operating Vista home, switched on comp, and lost all my icons across tool bar, the only thing showing is File – edit – view – etc, how the hell do I get them bk, I have IE7 installed.
 

A:Solved: Where's My Tool Bars Gone?

Click on view>Toolbars then click navigation and bookmarks
 

2 more replies
Answer Match 45.36%

Unwanted tool bars. See from previous posts that HJT log is needed, so included below. Just ran spybot S&D this morning.

Also, can't seem to keep my kids away from sites that load spyware. Have just updated HOSTs file based on Komando recommendation. I suspect my kids will not be pleased, but this seems to be a good solution. Do you agree? Any suggestions for better/additional alternatives?
Logfile of HijackThis v1.99.1
Scan saved at 6:52:43 AM, on 8/7/2005
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Norton Internet Security\ISSVC.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\LEXBCES.EXE
C:\Program Files\Lexmark\Lexmark Photo Center\MemoryCardManager.exe
C:\PROGRA~1\Lexmark\PHOTOC~1\LXBLKsk.exe
C:\Program Files\QuickTime\qttask.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\... Read more

A:Solved: Help gettin rid of Tool bars...

15 more replies
Answer Match 45.36%

I am sure this is probably something really simple, a tick box in options somewhere perhaps, but I can't seem to find it.

Basically I don't get any scroll bars in MS Word 2003 SP3 regardless of how big the document is. Changing the view (normal, page layout etc) doesn't make any difference.

Can anyone tell me how to get the scroll bars back, they used to be there and I have no idea how / why they have gone.

Thanks
 

A:Solved: Scroll bars in MS Word

Go to Tools - Options and on the View Tab under Show put a check mark beside "Horizontal scroll bar" and "Vertical scroll bar".
 

3 more replies
Answer Match 45.36%

For some reason, all folders that I open up in My Computer have no toolbars at the top of the folder. No buttons or address bar at all. I'm not sure how to get them back.

Anyone?

Thanks
 

A:[Solved] Tool Bars gone inW2K

8 more replies
Answer Match 45.36%

I upgraded to IE7 and I lost my Goodsearch(Yahoo) and Google search bars. I go to "tools," select "toolbars" and all of the search bars are greyed out.
(OS is XPhome on a Celeron 200 GHz with 224 MB RAM)
 

A:Solved: I lost my Search Bars!

Try this:
Tools> Manage Add-ons> Enable/Disable Add-ons
 

2 more replies
Answer Match 44.52%

The wifi setup went pretty seamlessly on the new HP desktop computer, but now that it is connected to the main household network, the computer wifi/internet connection on the new computer is either at 4 bars (4 bars out of 5), or it goes off entirely. Pretty frustrating to be downloading something full blast and all the sudden the internet connection just drops. An older Laptop in the same room as the new computer does not have this issue. Laptop has 4 bars all the time with no droppage. Its just the new HP desktop. I have a "guest" user setting too that when used on this new HP computer has the same issue.....4 bars, then after about 10 minutes it drops off.
I am thinking it might be something to do with the settings on the new computer, but not sure where to change things?

Things I have tried:
1. The powersaving and screensaver settings - all are set to put all to sleep after 1 hour.
2. The home network was added using the right password.
3. The router is fairly new and the modem too.
4. It makes no difference if all other wifi connected items are being used at the same time or not.
5. At all times day or night, the same issues.

Can't think of anything else. Any ideas on what I should do next?
I don't want to use a wifi extender because I have heard it slows everything down a lot. And I hate to move the router to the new computer because the wifi works fine all over our house (except for this one bedroom).
 

A:Solved: New computer wifi problem......Either 4 bars or Off??

7 more replies