Tech Problem Aggregator

Different removable disks assigning different paths

Q: Different removable disks assigning different paths

I'm trying to set up Symantec Backup Exec 12 on Windows Server 2003. I want to be able to backup week 1 to X:\, week 2 to Y:\ and week 3 to Z:\ as Backup Exec requires each drive to maintain its own drive letter.

I have 3 Seagate Free Agent hard disks. When I try to assign each one its own drive letter, it won't maintain it. For example if I set drive 1 to X:\, the swap it out for drive 2 and assign that one to Y:\, when I plug in drive 1 it will mount as Y:\ rather than X:\ which I originally assigned it to.

Does anyone know how to get Windows to recognize that these are three separate drives and allow them to maintain their own drive letters?

Thanks.

A: Different removable disks assigning different paths

can you not go into diskmgmt.msc and assign the drive path you require?

2 more replies
Answer Match 74.34%

So I have had Windows XP Pro 64bit on a seperate hard drive for a while that I have installed first. I just decided today to partition my second hard drive and put Vista on it. The installation went fine.. but sometimes i get corrupted errors and the Main partition for Vista is listed as C when its listed as E in XP. This is causing problems. How can I make it so it stays E? This has been baffling me. Any help would be appreciated. thanks!

A:Dual booting XP and Vista is assigning wrong hard drive paths!! please help!

bumpededededed

1 more replies
Answer Match 63.84%

Need help !!!!

when i open my computer i see 4 icons of removable disks, and i don`t have any connected.

A:removable disks

Do you have built in flash card readers that you can use to read digital camera chips in? If so, they occupy drive letters.

5 more replies
Answer Match 63.84%

When I navigate to Start > Computer an explorer window pops up showing two icons of my factory partioned HDD (C - main & D - Factory Image). Below these is a section titled 'Devices with removable storage'. Here my DVD RW drive (E) is displayed. Also displayed are 4 more icons labled Removable Disk (G, H, I and K - where's F?) As far as I know these are phantoms of some sort as I have no other devices connected, e.g. external drives, flash, sim cards, etc.) What are these and can they be removed? They cause me confusion.

thnx.

A:Whence Removable Disks?

Go to Organize->Folder and Search Options and in the dialogue check the box shown.

They are probably things like card readers.

9 more replies
Answer Match 63.42%

I am not sure how or why but 'my computer' no longer shows any of the removable disks i connect to the PC. This is somewhat annoying as it prevents me from transferring data from my PC to my PSP, Ipod or Phone and vice versa.

Any help with restoring these drives would be greatly appreciated.

By the way, my PC is registering the drives as they appear in the Safely Remove Hardware window.

A:Deleted Removable Disks F,E,H,I,J...

just go into disk management and assign letters to them if they appear there.

right click my computer, click on manage, click on disk management under storage.

2 more replies
Answer Match 62.58%

My computer won't recognize my thumb drive or camera cards.

When I open Device Manager, I have something called 'Other devices' with a yellow ? I'm not sure if this has anything to do with my problem, but wanted to let you know in case it might be relevant.

Lower in my Device Manager, I find 'Storage volumes' with 6 'Generic volumes' under it, all with yellow ! on them. When I plug my thumb drive into the front USB port, the 2nd of the 6 has the yellow ! removed and double clicking on the item brings up a window saying "This device is working properly" However, I dont' find my thumb drive in MyComputer. If I plug a USB card reader into the same USB port, the 3rd Generic volume loses its yellow!. but again it doesn't show up in MyComputer and won't open. When I plug the camera card into the card reader slot on the front of the computer, it also doesn't show up.

Both of these devices show up in MyComputer on another computer.

What I have tried:

Uninstalling all of them and rebooting, but they just came back with the yellow ! on them.

Installing them from my Recovery CD but no driver was found.

Letting it go online to search

Using a driver backup CD I had created with DriverMax

I'm not even sure it is a driver problem.

Any suggestions would be much appreciated.
 

A:Can't see Removable Disks or Thumb Drive

6 more replies
Answer Match 62.58%

Hi.

I've been having two problems that have been bugging me for awhile now, and i don't seem to find a fix for them.

1. When i connect an USB Memory Card Reader, the Windows checks for disks inserted into the drives (the memory card reader has multiple card slots and all appear in My Computer whether empty or not) and displays an error: "Windows - No Disk. There is no disk in the drive. Please insert a disk into drive \Device\Harddisk4\DR8"

If i click cancel, try again or continue, Windows keeps popping up error messages for each drive of the Card Reader, and when i cancel the last error message i get a BSOD.

If i boot with the Card Reader attached, i get no error messages, and later if i perform operations with it or insert an USB memory stick, Windows figures out i have the Card Reader inserted and prompts me the same errors. I guess there's something wrong with the autoplay/ removable disks system.
2. Every time i boot Windows and log on, explorer.exe crashes, with the following error message:

The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be "read". Click OK to terminate the program.

From time to time "0x000" gets replaced by a random address.

I don't remember when this started to occur, or what i did to cause it, and it always prompts at user logon, but only on a fresh boot, if i log off and then back on it doesn't pop up again.

Unfortunately r... Read more

A:XP SP3 Removable disks/explorer.exe problems

12 more replies
Answer Match 61.74%

When I start my computer, it detects 4 removable disks (f,h,e,g) but there aren't any. my hard drive failed so i replaced it and installed a new windows. At boot up, it detects removable disks as if they were connected, but nothing is...

A:computer detecting removable disks at start up

Do you have a storage card reader installed?

7 more replies
Answer Match 61.32%

I have been a user of NAV for a number of years and have liked what they offered until now. I am running XP Pro SP 2. I installed NAV 2005 only to find that I can no longer access my CD drives, floppy or compact flash reader. After uninstalling it all worked great. I reinstalled but the same problem came up. Anyone else have this problem? Does anyone have a fix?
 

A:Norton Antivirus 2005 loss of removable disks

try Norton Support
 

2 more replies
Answer Match 61.32%

Do you know why windows XP reinstall created extra removable disks?
My original hard drive crashed and I bought a new one. I reinstall windows xp pro and it created 4 extra removable disks on the installation. Removable disk c, d, e and f. the two dvd drives are g and h. Then I have logical drive i. Why and can I remove the removable drives?
 

A:Why windows XP reinstall created extra removable disks?

11 more replies
Answer Match 61.32%

I have autoplay completely disabled.
I realize that Windows Explorer (WE) will open if a new dvd, usb drive, etc is connected/inserted.

But 'I open' all of the WE windows I use but "Win7 64 will close that WE window if the thing is removed, even when it did NOT create/open it" !!

Anyone know how to disable this 'automatic' CLOSING of WE by Win 7??

Thanks for any help!! , this is a pain (and infinitely stupid on Win7's part) !!

A:How to stop Windows Explorer closing for removable Disks!

Unfortunately there is no feature built into windows 7 that can stop this from happening, there could be a 3rd party application somewhere. I personally think there was a-lot of stupidity on Microsoft side when they built windows explorer

Also Welcome to 7 Forums!!

9 more replies
Answer Match 61.32%

Hi,

suddenly I do no more get a menu windows asking what to do when I insert a removable media !

I get a pop-up window asking whether to check / test the media / drive or continue without analysis, but no more the other pop-up window asking what to execute

Earlier ( wednesday...) I got a window asking for example for my photo compactflash cards if I wanted to Import using Nikontransfer, open in explorer, and other options. That window does no more appear

I have checked autoplay options in Config Panel -> Autoplay: autoplay is on for all drives
I have checked in registry HKLM / HKCU NoDrivesAutoplay is set on hex 91

Any idea what I could do ?

Nothing changed intentionnally. Antivirus is ZoneAlarm

A:Autorun on removable disks/cards no more shows what to do menu !

<==== Download Link


<==== Download Link

Click on one of the links above that goes with your Windows 7 bit versions

Save to the Desktop.

Close all windows and browsers

Right click on and choose

Press: SCAN

provide the RKreport.txt (Mode: Scan) in your reply.

2 more replies
Answer Match 61.32%

I've had a new computer with win7 64bit for 4 months.

A couple of days ago 4 removable discs (f,g,h & i) appeared on the page that shows details of my computer (start->computer)

Using device manager under Portable devices I see 4 units coded f,g,h & i.

I can remove them from the device manager, but when I restart the computer they reappear.

I and not aware of activating these four removable disks / portable devices.

I cannot find a way of removing or hiding these unwelcome listings

I've tried restoring my computer to a previous level, but the 4 devices/disks reappear

Any and all help welcome.

regards

A:hiding/removing removable disks - portable devices

The first thing that I suggest when there are changes to the computer is to run a through anti virus scan. In addition download and run malwarebytes. This will elimiante the most serious of causes, we can move on from there.
http://www.malwarebytes.org/mbam.php

Once your computer is known to be clean, in lieu of anything else, you can use system restore from before the problem. Before taking such action be sure that you did not install any new programs etc.

5 more replies
Answer Match 54.6%

I guess this may be a tiny bit off the subject here, but I am attempting this in windows 7.

I have a program file manager tool called 'Directory Opus' that is capable of calling windows external programs and passing them the current directory the file manager is sitting on.

So far so good.

Now I want to call a cygwin (linux/unix emulator for windows) terminal with that file manager.

Checking properties on the cygwin Icon I got the path: C:\cygwin\bin\mintty.exe -i /Cygwin-Terminal.ico -

So it is a path to a command and an argument to that command.

Actually I guess it is 2 arguments to a command since I think '-' in that position means to feed anything on STDIN to the command. At least that would be true in unix shell programming.

So using the Directory opus setup I pass this call:
[email protected]:C:\cygwin\bin\mintty.exe -i /Cygwin-Terminal.ico - <and here add {s}>'

So the call ends up:
[email protected]:C:\cygwin\bin\mintty.exe -i /Cygwin-Terminal.ico - {s}'

That call does just what it is supposed to. It passed the current file absolute address however cygwin terminal does not understand the windows path notation. If I were passing it: C:\subdir\blah\ It would just say 'No such file' Cygwin terminal wants to see /cygdrive/c/subdir/blah Or at least I think that is what is happing.

So to cut to the chase.... I'd like to put a little wrapper to Cygwin terminal in there with the code necessary to convert 'C:\subdir\blah\' to '/cygdrive/c/subdir/blah/'

But, I do not know how ... Read more

A:Dos paths and unix paths conversion

I would ask on DonationCoder.com specifically this forum:
General Software Discussion - DonationCoder.com

The reason is I know there are a bunch of DO aficionados, who also use Linux, on that forum. I've never tried DO myself. I have played around with CygWin. But it's been a few years.

If the site wants a donation to sign up just explain to Mouser why you want to post etc.. I think he'll be sympathetic.

3 more replies
Answer Match 47.88%

I have a new PCMCIA HD that shows up as a removable drive, with serious delays in reading and writing. My other PCMCIA HD, and my USB drives all show up as LOCAL DRIVES rather than as REMOVABLE drives. How can I reset the new drive so that it will register as a LOCAL DRIVE and not as a removable drive? Reformatting didn't help. And I couldn't change things with Computer Management...
Suggestions?

It looks as if the new drive, unlike the others, does NOT have an MBR partition. Could this be the problem? How can I change the partition? Will fdisk do the trick?
 

A:resetting removable drive as basic rather than removable

MBR is not the problem, thats Master Boot Record, you have absolutely no reason for that on a hard drive that isn't booting an OS.

Make sure the drive is in DMA mode rather than PIO.
 

1 more replies
Answer Match 40.74%

Can any kind person explain the difference between a

Boot disk and Restore disk?

The reason I am asking is my Hard disk appears to be on its last legs and when it finally goes I will have to buy and install a new one.

I have a Restore CD (actually 2 that came with my computer) and I have read a little about Boot disks.

so .... When I start my computer with the new Hard disk what do I use? (as it will be blank)

a Boot disk?
or a Restore disk?
or both?


many thanks
 

A:Boot disks and Restore disks?

A boot disk is a disk that your computer can use to boot. A restore disk is a disk that contains some sort of restore information.

A boot disk may contain restore information and a recovery disk may be bootable.

In your case, you should just boot from the restore CD and follow the pretty on-screen instructions.
 

1 more replies
Answer Match 40.74%

I have just purchased Partition Magic 8 and installed it on my comp. without any problem,my new120GB HDD. was formatted and partitioned into three using my Windows XP Pro.instalation disk,now when I try to use PM.to change the size of the partitions nothing happens ie:- when I click on PM. in programs my comp.just hangs and I have to switch it off at the mains.I have read in the PM.Quick Start Guide "Quote" Windows XP uses Basic Disks and Dynamic Disks you CANNOT Perform PM Operations on Dynamic Disks "Unquote"Does anyone know if this is the problem I am having,and if so is there any way to resolve it? Any help on the above subject appreciated.
regards CallMac

Since I posted this Query I have gone into disk management and it has the partitions as TYPE Basic so I dont think that this is the problem,I also tried to open PM. again but the computer just keeps hanging with the little hour glass showing as if it is trying to do something but eventualy I have to switch it off at the mains.Can PM.be uninstalled?
 

A:Dynamic Disks/Basic Disks (help please)

11 more replies
Answer Match 40.74%
Q: Paths

Quote:




Sounds like your PATHS are wrong ?



This is always fun.



You need to ?locate? the nmake.exe and ensure that the path to this file eg, c:\myfiles\nmake.exe is listed in PATH




This is something someone told me i needed to do to finish compiling a program (anope IRC services)

Frankly I'm rather new to all of this and have no clue exactlly what to do

Any help would be greatly appreciated

A:Paths

This page has the full instructions for building Anope for Windows

4 more replies
Answer Match 40.32%

I'm writing a batch file which calls a 32 bit .exe program. I want it to be compatible with the different Windows operating systems. The problem is that the path to "Program Files" is different depending which OS is being used. For instance:

I know the paths for these OS' since I use them:
- WinXP 32 bit: C:\Program Files\
- Vista 64 bit: C:\Program Files (x86)\

Could some kind souls please tell me what the 32bit paths are for:
- WinXP 64 bit:
- Vista 32 bit:

And for Windows 7 also would be nice:
- Win7 32 bit:
- Win7 64 bit:

Thanks!
Sky

A:Need help with paths in XP and Vista.

Environment variable - Wikipedia, the free encyclopedia

Look down in the section called "system path variable" for %ProgramFiles%.

Some other good stuff on that page as well.


Gil

6 more replies
Answer Match 40.32%

Hi,

I recently had to get rid of of my slave harddrive, and therefore had to reinstall a few programs:

A problem occurs when i try to setup software using setup files that worked perfectly before:

---- 1607:Unable to install InstallShield Scripting Runtime.

I check this out on net. Download the required isscript.msi, which should automatically install the required installshield again. But then i get it automatically pointing towards my old hd

---- Error 1327. Invalid Drive: G:\

Can someone please help me understand whats wrong and how to find a solution?

Cheers,

Xav

More replies
Answer Match 40.32%

http://www.mediafire.com/?hlnmttzzyrg

I am using Parallels running Windows XP.
I try opening the run.bat file from there but it appears and disappears in a second. I managed to click it like crazy and see what it says. "UNC paths are not supported." I also opened CMD and dragged the run.bat file over into it. This is that I got...

Any help would be much appreciated.
 

A:UNC paths are not supported

7 more replies
Answer Match 40.32%

Im new to windows 10, i upgraded from windows 7. I am beyong annoyed with the File looking for is here, there, in that folder and dont forget the folder under it lol. I sync my phone to pc for Dropbox, Files starts to sync and im seeing the same file syncing over and over like 4 times, along with the annoying windows sounds each time. I look to see where they are going and one goes to a folder
Same file here
This PC-Windows C-users Branscum-dropbox

same file went here
Network-THEBRANSCUMS201-Users-Branscum-Dropbox
and here
C-users-craig and lisa-Dropbox

i could go on but im confusing my self even more...Please i dont need all them access points for the same file ...Could some one explain this to me
 

More replies
Answer Match 40.32%

All,

Looking for a way to add a single file to an existing .ZIP file, but need to specify the path within the existing file structure.

Example - I ZIP a directory and it's subs with all of their files. It has about 6 different subs and each of them have up to 10 subs of their own.
C:\WEBSHARE\WWWROOT\PE\SUB1\file1.asp

I need to add 1 single file and tell it that the path I want it to go to is:
C:\WEBSHARE\WWWROOT\PE\SUB1\file2.asp

BUT - the file is not coming from the same directory on the system being used to create the ZIP.

Please help.

Thanks,
Shaun
 

A:WinZip paths

6 more replies
Answer Match 40.32%

Hello, I know (am pretty sure >.<) that there is a way to do this.

I am trying to set a file path for a folder, but I need the folder to go to the current username, instead of my username. For example..

C:\Users\Matt\Documents\ - Is my current path

I want it to be C:\Users\*THEIR USER NAME*\Documents\

A:Help With File Paths

Hello Anyok,

You can use the path below for a universal profile path instead.

%USERPROFILE%\My Documents

Hope this helps,
Shawn

3 more replies
Answer Match 40.32%

I am trying to show a friend how to use a used computer he purchased recently. I have done some exploring in his files and folders. My experience is limited to XP only; so some things look different to me. I found this path: C:\Users\username\AppData\Local\Temp\services.exe which seems odd. Is a temp folder where Vista would place services.exe, or does this indicate a problem?

Thanks for your replies,
welf
 

A:vista paths

6 more replies
Answer Match 40.32%

Applications won't run because the paths can't be found but the files and folders all exist

More replies
Answer Match 40.32%

I did not know which forum to post in for my problem. Sorry if this is the wrong one.


I recently tried to relocate my data folders and something went wrong. When I was done I had dble folders. This is a picture of the results.
Attachment 171583

I moved them back to it's original place. I want to be able to move them a separate partician. I know that the problem has something to do with paths being incorrect.

When I click on the start menu and on my username icon it opens up my real user folders and not Libraries. I wonder if this is a clue. I have returned the start menu customizations to default and it still opens my user folders. Can someone help me figure this out?

Thanks.

A:Need to fix folder Paths.

Hi ariel5345

Have a look at this - Start Menu User Folder Buttons - Open to Users Instead of Libraries The second set of .reg files will reset your start menu open locations.

This should help put your user folders back to their default location - User Folders - Restore Default Location

Follow this excellent tutorial to help move your user folders successfully - User Folders - Change Default Location

Post back with any questions

Danny

6 more replies
Answer Match 40.32%

I was just wondering if there were a way to change the default cookie path in XP to another location; for example, my RamDrive...Thanks for any help! peace,
ian
 

A:XP Cookies and Paths

6 more replies
Answer Match 40.32%

Hey:

I'm trying to enter a registry value. However, the place to enter it is dimmed:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\

When I right click App Paths "New" appears and should allow me to left click on "Key". However, "Key" is dimmed so I cannot select it.

I am the admin and logged in as such. I have XP Pro SP3 installed.

How do I make "Key" available?

Thx

A:How to make xp app paths key available

Sounds like a permissions issue of some kind.

Right click App Paths then click Permissions
Administrators and System should have Full Control and Read access, Power Users should have Read and Special, and Users should have Read access. Creator Owner should have Special. These should all be greyed out, meaning they are inherited.

4 more replies
Answer Match 40.32%

http://www.mediafire.com/?hlnmttzzyrg

I am using Parallels running Windows XP.
I try opening the run.bat file from there but it appears and disappears in a second. I managed to click it like crazy and see what it says. "UNC paths are not supported." I also opened CMD and dragged the run.bat file over into it. This is that I got...

Any help would be much appreciated.
 

A:UNC paths are not supported

I've posted this on 10 sites and all I got are witty remarks. People are just dumb these days....
 

2 more replies
Answer Match 40.32%

there two windows xp professionals installe dmy pc .
How can I delete the second?

A:Boot Paths

Go to Start/Run and type msconfig go to the Boot.ini tab click Check All Boot Paths

2 more replies
Answer Match 40.32%

Is it possib to delete the shared document and libraries from my Seven ? Or will windows keep generating new ones at each boot ? Can I stop windows from doing this ? or have i have to live with this ?


PC-specs

Packard Bell Imedia
q8400
4 gb ram

etc


VV

A:Paths , Librabries ?

You need to remember that library's only point to the actual file somewhere on the network or on your own machine in the "user" files. If you need to delate something from the library you should delate the file from the actual source "my pictures" My documents" "my music".

But there is a way to make it work like you want.

Just go into Windows Media Player, choose the "organize" tab then "options" then choose the Library tab and set it to "delate files from the computer when delated from the Library. Although I believe that only works if you are delating files from Library of the machine that contains the source files.

That should allow for delating from the Library, but only from the machine that the files reside on, I don't believe it will work accross the network. It think it still works best if you delate from the file source instead of the Library.

1 more replies
Answer Match 39.9%

Would anyone happen to mind sharing how to assign an IP address to a computer via the command prompt? I know how to do it through the network connections in the control panel but it would just be a nice time saver to be able to do it right from the DOS prompt.
 

A:Assigning an IP

this syntax might help using the Arp command from the prompt

arp -s ip_address MAC_address
 

2 more replies
Answer Match 39.9%

My sound card and vid card are sharing the same IRQ (9)
and I think its causing some strange problems. I want
to assign another IRQ to the vid card but I don't know how.
Ive tried changing them in bios and nothing happens, I was told I can't change them because I have ACPI installed, how do i get around this or remove this?
 

A:IRQ Assigning

Check your bios settings for a way to disable ACPI.

Or reinstall w2k and when it starts press the F7 key when asking for drivers shows at the bottom of the screen.

Cheers,
Scully
 

1 more replies
Answer Match 39.9%

Dear All,

One of my user is facing copy paths issue in window 7 enterprise . User get the following error.




Thanks & Regards,
Kashiram Sawant

More replies
Answer Match 39.9%

Will the Windows Vista Upgrade path allow me to upgrade from 64 bit Home Premium to 32 bit Ultimate? I need to do this to use my legacy software without re-installing everything.
 

A:Vista upgrade paths

The last that I read, going from 32 to 64 required a CLEAN install. Based on that I would think that it would be the same for 64 to 32.
 

1 more replies
Answer Match 39.9%

Hi guys.
I've just tried to use WinMX and found that it is showing the full paths as to where files are stored on the users' HDs.

Can I turn this off? It makes it really difficult to see the file you're looking for, with all this C:\My Documents\My Music\..... crap at the front.

Thanks.

Gram
 

A:[SOLVED] WinMX paths??

Hiya

Go to the Search page. Then, look for a button that says:

Show Full Paths. Press that, and the paths should dissapear

Regards

eddie
 

3 more replies
Answer Match 39.9%

I have Windows XP Pro, sp 2.

I've encountered paths like: C:\DOCUME~1\ROYON~1\LOCALS~1\Temp. Except the tilde is higher. I don't know how to follow paths when there like this. Can someone please tell me how to interpret this path?

Thanks,

royeo
 

A:How do you interpret paths like C:\DOCUME~1\...

Hi.

This kind of path is contraction of the real folder or file names so that they are compatible with the old 8.3 DOS filename format. I don't know why it is necessary, but in (my) theory it works this way:
Long names are stripped of all spaces, even between words.
If the resulting string, without extension, is longer than 8 characters, the 6 leftmost characters are taken and an index appended, to distinguish between similar names.
So "ASDFGHJKLQWE" becomes "ASDFGH~1" while ASDFGHJKLRTZ" becomes "ASDFGH~2"

So the one you submitted translates to something like

C:\Documents and Settings\Username\Local Settings\Temp
Where username is different for each user of the computer.
 

2 more replies
Answer Match 39.9%

I use WinAso Registry Optimizer; when I run it my computer crashes when it gets to Invalid File Paths, but when I remove the invalid file paths flag, it completes the process just fine. I would like some advice on correcting invalid file paths...thanks.
 

A:Invalid File Paths

Don't use registry cleaners. If you continue to use them, chances are that crashes will be among the least of your problems. Those things are junk, do only harm, and you should be thankful you were even able to reboot. Performance is not improved by using them, they remove needed entries, and they create their own "errors" so that they can "fix" them, making worse errors in the process.
 

3 more replies
Answer Match 39.9%

after i run winaso registry cleaner/optimizer i get a messeage that i need to delte invalid files path

how do i do that ??????????

A:invalid file paths ???

Do yourself a favor, and if a registry cleaner offers to do something you don't understand, decline. It's far easier to clean the system to death than to actually fix something with a registry cleaner.

1 more replies
Answer Match 39.9%

When I open 3ds max I get a number of error messages for example:
The fonts path D:\Program Files\W2KPrograms\Fonts does not exist. Use configure paths to set the locatioin to a path that does exist.
[These messages also include The Import Path D:\Program Files\W2KPrograms\Meshes, The export path D:\Program Files\W2KPrograms\Meshes, The Expressions Path D:\Program Files\W2KPrograms\Express, Previews Path D:\Program Files\W2KPrograms\Previews and Video Path D:\Program Files\W2KPrograms\Videos does not exist. Use configure paths to set the locatioin to a path that does exist.]
I would dearly love to do that but I don't know how???
Can anyone help me to find out how to 'configure a path?'
Many thanks.
J. Nabney
 

A:(Solved) How to configure paths?

7 more replies
Answer Match 39.9%

Hello,
 
I can´t find a solution to this problem anywhere in the Net, so maybe you guys can help me. I just did a reinstall of windows 8.1 on my desktop using the option to keep all data AND program files. The process went on very well....BUT when I restarted some programs' exe files are not found by Windows when I try to open them (Ccleaner and Office 2010 are examples) Ccleaner I uninstalled and reinstalled but the message is the same " Windows cannot find [path], make sure you typed the name correctly and then try again...." Office 2010 I ran the repair option but the message came on again, so I reinstalled it and couldn´t open it because the message came on again. I think paths got messed up somehow because those files are certainly in my hard drive. Please can you help me out?

More replies
Answer Match 39.9%

How do you get to see the full path rather than have part of it cut off?
 

A:Seeing full drive paths

Take a look here:
http://www.ehow.com/how_2073275_display-files-complete-path-windows.html
 

3 more replies
Answer Match 39.9%

I am using Oplisker program.

Oplisker (Open Source Play List Maker) | SourceForge.net

How to create m3u file from mp3s in different folders on your computer ?


It seems to only create mp3 playlist only from mp3s in the same folder.

I was interested to create playlist from different folders with different paths
to save to one m3u file, not m3u file in each folder from the mp3s within that folder.


I know I can edit the file so it goes to different paths using notepad, but that would defeat the purpose of this program making it easier to save playlst from diferent mp3s in diffrent folders.

Thanks

More replies
Answer Match 39.9%

Hi,
We are stuck for the time being using Window Media Player to Rip/Burn/Sync music with. I've set the paths for the ripped music and library to go to a separate partition/drive, but each time the system is reset, WMP resets the paths back to c:\documents\ etc........
Should this be the way things work?
Thanks for your time,
patmac
 

A:WMP Rip and Library Paths Don't Stick

6 more replies
Answer Match 39.9%

Cant run any virus scanners I get "Windows cannot access specified device, file, or path." error.... getting horrid redirects and as you can see from THIS thread in the "Am I Infected" section we have tried a lot of things. DDS (Ver_09-07-30.01) - NTFSx86 Run by Vitamin SB at 17:41:55.32 on Wed 08/12/2009Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_13Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.958.614 [GMT -5:00]FW: Norton Internet Worm Protection *disabled* {990F9400-4CEE-43EA-A83A-D013ADD8EA6E}============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\System32\svchost.exe -k netsvcsC:\WINDOWS\system32\svchost.exe -k WudfServiceGroupsvchost.exesvchost.exeC:\WINDOWS\system32\spoolsv.exesvchost.exeC:\Program Files\Java\jre6\bin\jqs.exeC:\WINDOWS\system32\nvsvc32.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Java\jre6\bin\jusched.exeC:\WINDOWS\stsystra.exeC:\Program Files\Common Files\InstallShield\UpdateService\issch.exeC:\Program Files\Dell\Media Experience\DMXLauncher.exeC:\WINDOWS\System32\DLA\DLACTRLW.EXEC:\Program Files\Dell Support\DSAgnt.exeC:\WINDOWS\system32\ctfmon.exeC:\Program Files\UnHackMe\hackmon.exeC:\Documents and Settings\Vitamin SB\Desktop\dds.exe============== Pseudo HJT Report ===============BHO: Adobe PDF Reader Link Helper: {06849e9f-c8d7-4d59-b87d-784b7d6be0b3} - c:\program files\adobe\acrobat 7.0\activex\AcroIEHelper.dllBHO: AVG Safe Search: {3ca2f312-6f6e-4b53-a66e-4e65... Read more

A:Windows cannot access paths?

Hello YouMayLose,You appear to be infected by a new very nasty Rootkit infection associated with a Rogue antivirus program. See here for more info.==========Let's begin.....Download and run Win32kDiag: Download Win32kDiag from any of the following locations and save it to your Desktop. Download Win32kDiag (Win32kDiag.exe) - #1 Download Win32kDiag (Win32kDiag.exe) - #2 Download Win32kDiag (Win32kDiag.exe) - #3 Double-click Win32kDiag.exe to run Win32kDiag and let it finish. When it states "Finished! Press any key to exit...", press any key on your keyboard to close the program. Double-click on the Win32kDiag.txt file that is located on your Desktop and post the entire contents of that log as a reply to this topic.Next......Download and run a batch file (peek.bat): Download peek.bat from the download link below and save it to your Desktop.Download peek.bat Double-click peek.bat to run it.A black Command Prompt window will appear shortly: the program is running. Once it is finished, copy and paste the entire contents of the Log.txt file it creates as a reply to this post.==========With your next post please provide:* Win32kDiag.txt* Log.txt

57 more replies
Answer Match 39.9%

Since a picture is worth 1000 words....



I can't figure out how to edit booloader paths.

I had the triple boot working- 7, vista, WUBI ubuntu. Then I installed Snow Leopard and tried to add it in via easyBCD.....and all hades broke loose.

Anybody know how to fix? And how to actually set OSX to boot from windows, since there's no drive letter?

A:Edit Bootloader Paths

Open an elevated command prompt in Windows 7

IMPORTANT: make a backup of your bcd file first. To do that, type:


Quote:




bcdedit /export C:\SAVEDBCD




For Vista:

Quote:




bcdedit /set {*insert here*} device partition=F:




* insert the Windows vista BCD ID, too small for me to read (take out the *'s)

ok, Vista should be working now, please test it to make sure

For Ubuntu: - optional; this will rename "nst Linux Loader" to "Wubi Ubuntu"


Quote:




bcdedit /set {*insert here*} description "Wubi Ubuntu"




* insert the "nst Linux Loader" BCD ID, too small for me to read (take out the *'s)

It is getting late, so try those, which should get Vista back on its feet, also go to the elevated cmd and type "bcdedit" please post back the results right-click the cmd prompt and select "mark" then highlight every thing, then post the results. Please copy the results, so i will be able to copy and paste

Also, what is the "EFI snow leopard" partition for???

19 more replies
Answer Match 39.9%

Hello! I recently upgraded my computer with an SSD for boot and main programs and use my 1TB HDD for general programs and media storage. The thing is I want it to by default install to my D:\ drive.

Now the only solution I see is editing the registry ProgramFilesDir - Which has some serious flaws. It will attempt to launch every program off of the D:\ drive even when it is stored on C:\ and about 9 out of 10 times, it still default installs to C:\.

Does anyone have a fix for this?

More replies
Answer Match 39.9%

There are still doubts about what the possible and legal upgrade paths are for Windows 7.

Below I tried to compile some information in a way which I hope will be helpful.

Thanks to my friend Kari for his valuable contribution
Any other additions or comments are much welcome

Definitions:
1) Upgrade: to move from Windows XP or Windows Vista to Windows 7
2) Custom or Clean Install: wipes the previous installation and install Windows 7 anew. Does not preserve user files
3) In-Place Upgrade: upgrades from specific versions of Vista to specific versions of Windows 7, preserving user files and programs.
4) Upgrade version: Windows 7 license for those who own a valid license of XP or Vista
5) Full retail version: Windows 7 license to install on any PC, independent of previous installations or ownership. Can be reinstalled on other computers (when activated the previous installation is no longer valid)
6) Full OEM version :Windows 7 license to install on one PC, independent of previous installations. Can only be re-installed on same computer and hardware setup

Upgrade paths
The chart below shows in what situations one can perform an in-place upgrade (e.g. from Vista Business to Windows 7 Professional) without the need to migrate files or programs, and the situations when one needs to do a Custom (Clean) Install and replace the data in the target disc. This is the case for all Windows XP owners or Windows Vista Starter. In this case you will need to migrate your personal files ... Read more

A:Windows 7 Upgrade Paths - FAQ

Excellent!

9 more replies
Answer Match 39.9%

So I've been trying to use system file checker, and encountered a problem where it can't repair a file. I found this page detailing how to manually fix the problem:

Use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

I was fine until step 2, where it says

"For example, type takeown /f E:\windows\system32\extremely_simplified_example.dll"

The problem is, my CBS.log file says stuff like:

Cannot repair member file [l:24{12}]"FWPKCLNT.SYS"
Unable to repair \SystemRoot\WinSXS\Manifests\\[l:24{12}]"FWPKCLNT.SYS"

and I don't know how to translate that into a path to use with the takeown command. I searched for that file using explorer and found a dozen different copies, so I'm not sure which one to replace.

Semi-related questions: Can I just replace them all? I'm planning on using a copy of the file from a similar system that works, is that ok?

Thanks!

A:Help understanding CBS.log file paths

Hello Southbound, and welcome to Seven Forums.

Those instructions there are fine, but just a bit vague. OPTION THREE in the tutorial below can help give you only the SFC results to help make it easier to go through.SFC /SCANNOW Command - System File Checker
Next, the tutorial below can show you how to extract files from your installation disc to replace any listed files that SFC cannot repair.Extract Files from Windows 7 Installation DVD
Before doing anything, please post back and upload your sfcdetails.txt file to see what all may be wrong, and if it any file that cannot be repaired is worth worrying about.Screenshots and Files - Upload and Post in Seven Forums
To help interrupt what it says to know the path:Cannot repair member file [l:24{12}]"FWPKCLNT.SYS"
Unable to repair \SystemRoot\WinSXS\Manifests\\[l:24{12}]"FWPKCLNT.SYS"
The first line says that SFC cannot repair the FWPKCLNT.SYS file.

The second line is the path of the file. "SystemRoot" is a variable "%SystemRoot%" that is actually just a shortcut for "C:\Windows". This leaves you with the file path as:C:\Windows\WinSXS\Manifests\FWPKCLNT.SYS
Doing a search on the C: drive for the listed FWPKCLNT.SYS file would help give you all of it's locations if needed as well.

Hope this helps for now,
Shawn

3 more replies
Answer Match 39.9%

On my main PC i am running Windows 7 Homepremium 64bit. My Pc is connected via ethernet cable to BT Homehub3.

I have another PC running Windows XP SP3 connected via WiFi and a laptop also Wndows XP and connected vis WiFi.

I have a Kodak C110 AiO printer connected to the home pc via USB cable.

I have tried to set up printing on the other PC and laptop and the Printer is shown in the network map, but cannot and all my efforts have now disrupted the network; viz I cannot access shared files on the Network.

On the Home PC the network is called Network 2.

I want it to be the Homegroup or Work Group but cannot seem to make this happen.

Any suggestions please?

A:How do I reset my network paths

If I take it you want to print on the main PC from the other two ? I have a similar situation and set it up giving the main PC a fixed IP and then when adding the printer to the other two I used the local port method i.e \\fixed IP address\printer share name, having initially shared the main printer - you will need to install the printer driver on the remote systems. My main PC is ethernet and all the others are wireless.

Hope this is of help.

3 more replies
Answer Match 39.9%

From this download link: http://www.microsoft.com/downloads/d...displaylang=en
Unsupported Upgrade Scenarios


? Upgrades to Windows 7 from the following operating systems are not supported:
? Windows 95, Windows 98, Windows Millennium Edition, Windows XP, Windows Vista? RTM, Windows Vista Starter, Windows 7 M3, Windows 7 Beta, Windows 7 RC, or Windows 7 IDS
? Windows NT? Server 4.0, Windows 2000 Server, Windows Server? 2003, Windows Server 2008, or Windows Server 2008 R2
? Cross-architecture in-place upgrades (for example, x86 to x64) are not supported.
? Cross-language in-place upgrades (for example, en-us to de-de) are not supported.
? Cross-SKU upgrades (for example, Windows 7 N to Windows 7 K) are not supported.
? Upgrades from Windows Vista to Windows N, Windows K, Windows KN, or Windows E are not supported.
? Cross-build type in-place upgrades (for example, fre to chk) are not supported.
? Pre-release in-place upgrades across milestones (for example, Windows 7 RC to Windows 7 RTM) are not supported.

Supported Upgrade Scenarios



From Windows Vista (SP1, SP2)
Upgrade to Windows 7
Business
Professional, Enterprise, Ultimate
Enterprise
Enterprise
Home Basic
Home Basic, Home Premium, Ultimate
Home Premium
Home Premium, Ultimate
Ultimate
Ultimate
... Read more

A:Win7 Upgrade paths

These are "in place" upgrades.
To upgrade from XP is also possible doing a clean install.

1 more replies
Answer Match 39.9%

My documents are located in D:\Dropbox\MyOwnDocuments

I no longer use Dropbox; so I would like to move them all to D:\MyOwnDocuments

Problem is that I have many portable programs there, and also program files and program data for programs running from my C drive. Not to mention various other shortcuts to documents or folders in D:\Dropbox\MyOwnDocuments

Is there a quick way to check which programs / shortcuts need to be changed? Or (better) is there a way to change these paths automatically?

Thanks for any input.

A:How to change paths seamlessly?

Use subst cmd to fool things they are still in the same location Subst

1 more replies
Answer Match 39.9%

Hello,

A little background first.

I have a shortwave radio that is of a new type where a lot of the functions such as filters, etc. is done via software that resides on the PC.

The radio is mfg. by the WINRADIO company.
The model of the radio is a G31 DDC

After playing with the radio, it automatically Saves the frequencies that you have listened to, and puts them into Memory to be able to recall them later.
The file that it creates is called "User Memory"..

I seem to have the User Memory File in the right place, I think, but the "path" to get there seems to be different.

I have one path of:
Libraries/ Documents/ WINRADIO/ G31 DDC/ User Memory

And another path of:
C:/ Users/ Bob/ My Documents/ WINRADIO/ G31 DDC/ User Memory

They both seem to lead to the correct file of User Memory.

a. My main question: Is there really only one file of User Memory, but two different ways or paths to get to it ?

b. What's with Libraries; I've never set that up ? What are they ?


c. Notice that one path has My "Documents", and the other just "Documents".

If anyone could explain this for me, I would be most appreciative.

Much thanks,
Bob

A:Two Paths To The Same File Question ?

A Library doesn’t contain files, but provides a single aggregated view of multiple folders and their contents.

These links may help:

Libraries - Personal and Public User Folders

http://msdn.microsoft.com/en-us/magazine/dd861346.aspx

Windows 7 Libraries: Frequently Asked Questions

http://technet.microsoft.com/en-gb/l...33(WS.10).aspx

2 more replies
Answer Match 39.9%

How would I set up Windows 8 so that I can edit the `path` environment variable in a fixed pitch font such as `Console` or `Lucida Console`? I don't want to change the font for other parts of Windows - only where paths are displayed. It seems I've been doing this in a terribly inappropriate font for many years and my tired eyes aren't great for semicolons.

A:change the font for paths

Hi Broiyan,
In windows 7 it was so easy by going to control panel, but now is much harder(you`ll see what i mean):
As Far As i know go to regedit>>>>HKEY_LOCAL_MACHINE>>>>SOFTWARE>>>>Microsoft>>>>Windows NT>>>>Current Vision>>>>FontSubstitues>>>> thats all what i know now i need an MVP like brink to hep you with here.

9 more replies
Answer Match 39.9%

I can ping by name or IP address, but trying to connect via
\\name or \\ipaddress fails. IP v6 has been disabled on the adapter.  The error message is: 
\\share is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  A specified logon session does not exist. 
It may have already been terminated.

Thanks for helping!

More replies
Answer Match 39.9%

Firstly, context: My student edition of Autodesk Maya was not working (something about the license being invalid or 'not found', and so when I searched for the error message online, a solution was to go into Environments and Paths, and replace/edit or add one for C:/Autodesk. It didn't work, and I ended up just uninstalling and reinstalling the program manually for it to work.
However, apparently I screwed around really badly in there, because now important things won't open, such as my MalwareBytes program. When I try, a window will popup and say this:
"C:\Program Files (x86)\Malwarebytes Anti-Malware\mbam.exe
The system could not find the environment option that was entered."
So, naturally, I try to find/open the Environments and Paths thing again, right? Nope. I can't open that either:
"Windows cannot find '%windir%\system32\SystemPropertiesAdvanced.exe'. Make sure you typed the name correctly, and then try again."
Even though I typed 'Environment' in my search bar to find it.
Then recently, Origin tried to install an update on my laptop, but it couldn't find the ProgramFiles, and so there was an error in installation. As a result of this, Chrome is not opening up immediately when I click it. It waits about five-six minutes after I've clicked it. I think it's what caused it, because it didn't do it before yesterday, when I tried to install the update.
So basically: how can I fix this despite knowing little to nothing about computers? How can I go into the Environments with... Read more

More replies
Answer Match 39.9%

I was wondering what would be a good career path to follow or combine with a mcse certification. Would it be better to go the cisco way and get the ccnp or with red hat and do the rhce? I am currently in South-Africa and been around to our local job sites but it seems that demand for both are low at the moment.
 

More replies
Answer Match 39.9%

ok this might sound stupid but, i have a wi-fi router that also has ports for wired connections.
my laptop is usually connected to the router through the wireless medium but if i connect the wire too then what path would the packets take?
the wired or
the wireless?
 

A:priority of routing paths

10 more replies
Answer Match 39.48%

Hey guys, I'm a pretty novice wireless network user, as I have a Dell laptop with an Intel PRO/Wireless 2200BG Network Connection.

Anyways, I'm running a network at my apartment with a D-Link cable modem and a D-Link WBR 1310 wireless G router. This combo is in my roommates room, connecting his computer through an ethernet cord coming from the router. I had planned on using this wireless router to pick up a signal throughout the apartment, setting up a secure wireless network from it.

Over the first few months, this worked fine. One day, however, I started up the computer and got the "limited or no connectivity" message when I tried to connect to the network. Whenever I go to the status screen of the wireless connection I get a message saying the the network could not assign a network address to the computer. When I click "repair" I just get the same problem over again. I have tried several things including the CMD screen/ipconfig/release then ipconfig/renew - which didn't work. I tried logging on to the IP address of the wireless router through my roommates computer and renewing the IP...still didn't work.

What's weird about this is that this is the only location I can't pick up a signal. Everywhere else I go that has a wireless network connection I have no problems connecting whatsoever. It's only in my apartment.

Any suggestions?
 

A:Problem Assigning IP

9 more replies
Answer Match 39.48%

Hi there

I'm looking for some help if it is possible. I have a Fujitsu Siemens laptop running Windows XP Professional. No problems with the laptop itself until I connect a projector to it. What then happens is the laptop's screen becomes the second monitor and the projector becomes the first. Not a huge problem again as I've worked round it. The problem lies that it wont allow me to mirror the screens, it only allows an extended desktop. When I switch this off it then doesn't output to the projector.

Any thoughts on how to sort this as an extended desktop isn't ideal for everything it's being used for.

Cheers

Colin
 

A:Monitor Assigning

so u have the right hook ups and mabe its cuz ur running XP off of siemens well im confuesd here can u explan it better to me?
Mabe i can can help u here!

I have alot of experence wiht computers!
 

3 more replies
Answer Match 39.48%

Hello,
I am a sys admin and am having problems with a USB key. XP keeps loading a USB 2.0 Cyclone gig-stick to drive letters assigned (mapped) from the network. I would move the mapped drive however that is not an option. Where can I assign a drive letter to "every" USB stick no matter what or who puts it in? I have moved mapped drives and even assigned a specific drive letter to the gig-stick, unfortunately when another one is put in it does not keep the properties.
Thanks!!
 

A:USB drive assigning in XP

8 more replies
Answer Match 39.48%

I have a Acer Aspire One that crashed and blew smoke out the power plug hole a few weeks ago. I had Windows 7 installed on it. Sent it to the factory. They replaced the motherboard, keyboard, LCD cable and HARD DRIVE........ S'ok didn't loose any data. Knew I'd just re-install all of the programs I had before. When I turned it on, found that they had installed VISTA with an "User owner" of ACER. After reading found out that it was better to upgrade to Windows 7 than do a clean install, so that's what I did. Works good, except it still has an "user owner" (don't know what else to call it) of ACER. I'm the administrator, but when I install some software it says it's registered to ACER. Is there someway to change that over to me or do I have to do a clean install?
Thanks

A:Is assigning a different user possible?

I'll let someone else answer the changing of the registered owner, but where did you read that an upgrade is a better option than a clean install?

Clean installs are always the better option. Acer should have all the drivers and utilities you would need on their website. Then, with a clean install, you add to the system only what you want.

4 more replies
Answer Match 39.48%

How can I assign my Headphones (front jack) to play from a certain program, and the main speakers another.

What I'm trying to do is assign my Head phones to play everything from Xfire, and to play my game sounds from my speakers. This is possible right?

Thanks in advanced - MUZZIES

A:Assigning speakers

No, I've never seen it before. I've heard it asked for many times, but never seen it before.

1 more replies
Answer Match 39.48%

OK, my problem is simple yet, I do not use virtual xp at all so I am kinda lost here. I have a customer that wants to run his IP based printer from this VM using a software that is not win7 supported. The software loaded perfectly. I just need to get a NIC to work so I can ping the printer at a static IP. I see a (Generic) Intel NIC in the Network Connections window on the VM, I can even ping the card when I set it up as static. But I cannot ping the IP printer from the VM. They are connected with a crossover cable and all works perfectly from 7 (i.e. pinging the printer) but on the VM I get timeouts. There are 2 NIC's on the physical 7 OS and both are functioning perfectly.

My question is 1st- Why do I not see a physical card on the VM?

2nd- What do I have to do to get one of the two cards to talk to my IP printer from the VM?

I am very appreciative for any help!
Thanks

A:Assigning NIC in Virtual XP

Make sure you are using bridged mode rather than host only networking within the setup of the virtual machine.

1 more replies
Answer Match 39.48%

Hey guys,
You know the SysRq command that's on the same button as PrintScreen? Is there a way to assign that button to do something? I've heard of it being used on Ubuntu, but so far it seems useless on Windows.
Julian

A:Assigning the SysRq key

wow, it's been a while since I posted this topic. anyone have an idea?

1 more replies
Answer Match 39.48%

Hello geeks and gurus allover this planet and beyond. This is not a problem per se, it is only something I would like to do if it is possible.

I get TV from my home country here where I live over the net. I subscribe a Finnish IPTV service, receiving signal with a Motorola VIP1920-9T IPTV box. The box had no HD; if I want to save tv programs, I use a web-PVR where I can choose any show from any channel I'm subscribing from the last two weeks. Service provider saves all channels for me for 14 days. Using this web-PVR I can also stream the shows to my computer, which is practical to somebody like me who has to travel quite a lot.

I have a 50 Mbps VDSL line, router is Belkin N1 Vision. It is normally really fast, working fine and enough for me. The problem is, when I use web-PVR to download a show to my HD, it uses all bandwith it can get. This means a stuttering TV-signal and slow surfing as long as the download takes.

Web-PVR has a nice and easy interface where I can choose bandwith (image after the text). I think it is only for streaming, having no effect to download speed.

So here comes the question: how can I assign a certain minimum bandwith for IPTV box, and set a certain max bandwith for web-PVR. The goal is to give IPTV a minimum 15 Mbps, web-PVR maximum 15 Mbps and leave the rest free so surf speed is not affected even when wathing IPTV and downloading shows.

Any help appreciated.

Kari



Edit: I've asked IPTV servicer provider, they say there's nothing t... Read more

A:Assigning bandwidth

  
Quote: Originally Posted by Kari


So here comes the question: how can I assign a certain minimum bandwith for IPTV box, and set a certain max bandwith for web-PVR. The goal is to give IPTV a minimum 15 Mbps, web-PVR maximum 15 Mbps and leave the rest free so surf speed is not affected even when wathing IPTV and downloading shows.

Edit: I've asked IPTV servicer provider, they say there's nothing they can do.


Kari; After reading your post, I am wondering if a "Download Manager" would do what you want. This is "FreeDownloadManager", although there are many others.

It is designed to reduce the time it takes to complete a download by downloading several parts of the file simultaneously. However, it can be set to download only one stream and allow for other network activity.

Just a thought?

Robert

3 more replies
Answer Match 39.48%

I have been doing some CD burning speed tests and have come across something interesting.

On my Win98se machine, I have a 24x burner. The new Roxio update now shows actual speed while burning. I noticed when I selected 24x, the speed varied anywhere from 6x to 14x during the burn. I tried again by killing all processes I had like McAffee and firewall and the speed increased slightly to a range of 8x to 18x.

However, when I went to CD properties in Device Manager and checked DMA, the speed is now consistently over 20x for most burns, even with background processes running.

Now to my Win2K question. My friend has a 40x burner on Win2K Pro. However, I cannot find any way to assign a DMA channel to it (assuming he would get the same success I did). His 40x is now slower than my 24x.

Anybody know how to assign a DMA channel in Win2K Pro?
 

A:Assigning DMA channel to CD-RW

Assigning the DMA is a two part process in W2K.

First, you have to have UDMA enabled in your BIOS setup.

You then go to Device Manager (right click My Computer, Properties, Hardware, and Device Manager. Open the "IDE ATA/ATAPI controllers" entry, and right click to select the properties of the primary or secondary IDE, depending on where the CD-RW drive is connected. Under Advanced Settings, select "DMA if Available".

Reboot.
 

2 more replies
Answer Match 39.48%

Hi, im running RoadRunner with a wireless G broadband linksys router for my wireless network, and i want to assign a specific Ip adress. My ultimate goal is change my 3rd number to anything divisable by 8, and the last number to be 0(the first and second don't matter to me). I've already tried going into the router setup, and changing my MAC address, but when i save the settings, i loose internet connection, and i have to reset it back to the original to even get connection again.

Also, i am using a router, if that matters.

Any help would be much appreciated!
Thanks
 

A:Assigning an IP Address

11 more replies
Answer Match 39.48%

Good Afternoon ! I am working on a school assignment and I need help in assigning IP addresses in this topology. I really want to nail how it is I can learn how to come up with IP addresses that will work. Please help!

LAN A is a 10.10.0.0 network.
LAN B is is 192.168.10.0 network.
The interconnection between router 2 and router 3 is a 172.16.0.0

Thanks,
Masey
 

A:Help assigning IP addresses

this is the URL of the topology : https://plus.google.com/11211124648...6283542276871074930&oid=112111246488562066985
 

2 more replies
Answer Match 39.48%

I just installed a US Robotics PCI modem in an older Compaq running Win98. The device is installed and is reported working properly but to set up the internet connection, the computer is looking for a modem in COM 1. The modem is shown in COM 3. There isn't much in the way of BIOS setting to look for on this machine. How can I reassign the COM port so the computer will find the modem?
 

A:Assigning com ports

6 more replies
Answer Match 39.48%

I just got a PC Internet Card from AT&T, It is a Sierra Wireless AirCard 875U.

I keep getting this error every hour or so from Windows:

Windows has detected an IP address conflict

Another computer on this network has the same IP address as this computer. This computer may have network connectivity issues if this problem is not resolved. If the IP address on this computer was assigned manually, assign this computer a different IP address.
It will cause my connection to pause, and I have to disconnect and reconnect to get it back up and running.

What's causing this and how do I fix it?
 

A:Assigning IP Addresses?

Did you talk to AT&T?
 

3 more replies
Answer Match 39.48%

Can someone tell me how to assign a Static IP address. We cannot get my hubby's computer to connect to the internet...which is weird because in a year we have never had this problem before...
 

A:Assigning an IP address

Are you on a network and trying to assign a network IP?

If not, you will need to pay your ISP for a static IP.
 

3 more replies
Answer Match 39.48%

Hello,
I want to know how to assign IRQ to VGA(Enable)?. Where i can find it? Is that located in BIOS? if yes then where because i have searched everywhere in BIOS but din't find it
I have contacted manufacturer of my graphic card he suggested me to do so to get rid of graphics problem like screen black out. So please help.

MY PC config:-
i5-2500k processor(intel)..DH67Cl motherboard(intel)...4gb ddr3 ram (gskill)...gt240 ddr5 1024mb graphic card(palit)...600watts power supply(corsair).

Thanks in advance
-Regards

A:assigning IRQ to VGA(Enable)

Do you actually have an IRQ conflict in the first place? I'd be surprised if you did.

You would change the IRQ in Device Manager. However I think you can't do that if there is no conflict. I seriously doubt your issue has anything to do with an IRQ.

But to answer your question, if you were to change an IRQ you'd click Start -> Search, type "Device Manager" minus the quotes in the box, expand your video adapter in Device Manager, right click it, select Properties, select the Resources tab, scroll down the box till you see where it says IRQ and highlight it. From here, I think if there is no conflict, you can't do anything. If there is a conflict you would select Change Setting and select an IRQ not in use.

19 more replies
Answer Match 39.48%

I basically want to install another nic in my machine.

Here's the problem. When i installed the new nic, it starting messing with other hardware. (mouse wouldnt respond)

So Im thinking its an irq conflict. and sure enough, it was being shared with my video card. I dont know why my mouse was affected.

Anyways, i see that irq#9 is free.

Is there any way i can manually assign irq 9 to the new nic?

Im running windows 98se, with 256 ram.

I also have a geforce 256, soundblaster live, and a d-link nic presently installed.

Any help would be greatly appreciated,

Jolt
 

A:Manually assigning an irq

This article should answer your IRQ questions http://www.pcnineoneone.com/howto/irq1.html
Have fun Steve
 

2 more replies
Answer Match 39.48%

Hi there,

I have a small guest house with about 14 rooms. We have 1 fritzbox adsl router system(1024 kBit/s) connected to 2 dlink dap-1360 access points which repeat the bandwidth to 2 dlink dap-1360 repeaters. In other words there is internet access throughout the premises. What I need to know is how can I disperse an even amount (lets say 10kb each) of bandwidth to each guest who logs onto the wireless system. reason...sometimes there is a guest who abuses the system (usually torrentz or youtube) and it eats up all the bandwidth. All the other guests complain that the internet is slow. How can I resolve this?
 

More replies
Answer Match 39.48%

I am fixing to add a second hard drive to a computer. Currently the HD is assigned as the C drive, with the CD and DVD being D and E.

If I add a slave drive will it show up as the F drive? Is that the best, or is there a way to assign it as the D drive and bump the CD and DVD down to E and F drives?

If so will it mess up programs, etc. Am running XP Pro.
 

A:Assigning letter to new HD

6 more replies
Answer Match 39.48%

Hello i currently have three computers on my network two wireless one wired......

i want to give my Wired pc a ip that never changes behind the router for example i want it to allways be 192.168.1.103 i need it to be that for port fowarding i use a Lynksys WRT54G any ideas?
 

A:Solved: assigning ips...

16 more replies
Answer Match 39.48%

Hello everyone
How you're all doing?
I have a computer with a windows 2000 Professional as O/S.
but the person who installed it assigned the letter D to the Hard disk and E to the CDROM. Now I just bought a CDRW (CD burner) that I want to install.

Is that a problem to install it, or should I reassign C to the Hard disk and D to the CDROM so that I can assign E to the CD burner?

How do I reassign C to the Hard disk and D to the CDROM?

thanks for helping me!!
 

A:assigning drive name ?

Well...

I am not completely understanding your question, do you mean that the OS is on D: and not C: ??

If so can you double click on "My Computer" and tell us what drives are present ??

It sounds like that whoever installed the OS had it Boot from C: and the OS is loaded from D:...
 

3 more replies
Answer Match 39.48%

i installed vista on a spare dock drive to test it out i decided i liked it so i ordered another drive for vista to run on then i backed up my storage drive and then formated the drive from a XpPro x64 OS and reinstalled vista on its own dedicated hdd the prob is when the installer reboots and it gets back to vistas boot screen it shows 1 xp boot path and 2 vista boot paths one works and the other doesn't but in the one that dose i get all kinds of missing file and corrupt file errors any ideas?
oh and is there anyway to speed up the vista install its kinda sluggish (normal?)
thanks in advance.

AMD BE X2 5000+ 3Ghz 200x15
Asus Formula Crosshair II
8Gb Corsair Dominator 1066 running at 800 (4x2gb)
2 WD raptor 74Gb in raid 0 (XpProx64 &Games)
2 WD caviar 250Gb dock drives
WD raptor 300Gb (for vista)
2 EVGA 9800 GTX SLI
Enermax Galaxy 1Kw PSU

More replies
Answer Match 39.48%

Hi all,

I was hoping someone knowledgeable could clear up some confusion I have on the upgrade process. I've googled my questions and it seems there is no definitive answer and that Microsoft themselves seem to not be consistent on their treatment of upgrades.

I originally wasn't going to upgrade but at $39.99 for a Pro version, I can't resist. I am aware that you need a current install to upgrade. I was hoping that during the upgrade process I would be given an option to chose the key I wished to invalidate for the upgrade. Now, I am quite fond of my Windows 7 license and am going to keep it around in case I don't like Windows 8 and just because it is a great OS.

So my dilemma is as follows:
I have a couple full licenses for XP and Vista. I also have the OEM license of Vista Business that is on a sticker on my computer. I am resigned to the fact that I'll have to uninstall my current OS and install an old one for the upgrade and I can live with that.

I would, however, like to get rid of my most worthless license for the upgrade, which in my opinion is the one OEM one on a sticker on my laptop. So I guess the question is would the limitations of the OEM license, which is that it is only valid for that specific machine be attached to the upgraded version. As the Pro upgrade is for a limited time only, I imagine any future computer I will buy will have the Home version with it and I would like to preserve my access to the Pro version as well as to have the option to have a... Read more

A:Upgrade paths and future limitations

Hello jaebberwock. Welcome to the Eight Forums.

You mentioned "in case I don't like Windows 8" so I guess you haven't used it yet.
Based on that assumption, I would suggest downloading Windows 8 Enterprise Evaluation for free. (good for 90 days) Burn it to a dvd. Do you know anything about imaging? Do you have any external drives? I would consider learning a little about external drives so that you could make some images? Are you on a budget? Can you afford to spend a few bucks on imaging software? Search online for imaging software. You could image your XP system without affecting it by an upgrade. Same with Vista or Windows 7. Image what you want to save so that they could be returned to the condition they were in. I cannot help you with your questions about upgrading licenses and keys so maybe someone else will chime in. Personally, I am not a fan of dual booting, many problems could happen. Opinions vary.

Download Windows 8 Enterprise Evaluation

From my point of view, I would image backup XP, Vista, Windows 7 using the software of your choice (perhaps something like Acronis). Then, install Windows 8 on unallocated space. Do you know what unallocated space is? I apologize. I know nothing about what you know. Anyway, good luck. There are tutorials here:

Installation & Setup - Windows 8 Forums

Suggested Steps To Take Installing And Setting Up Windows 8

2 more replies
Answer Match 39.48%

Hi friends!

I'm experiencing a very strange bug with a custom library. On the odd occasion when I open an explorer pane and navigate to my library on the left-hand side, two of my included folders - which are both located in 'C:\Program Files\...' will change to a non-existent 'C:\Program Files (x86)\...' version of the same folder. If I click on that folder in the library pane it will tell me the folder doesn't exist.

It happens infrequently but often enough to be annoying. It's not immediately clear what causes it or why it stops. When it happened just now I closed all open explorer panes and opened a new one, and the library displayed the correct 'non x86' folder structure.

Any idea what causes this and how it can be avoided?

Thanks!

Adam

More replies
Answer Match 39.48%

Where are the Office programs' exe files found? I cannot find them in 2010?
I check the Office program shortcuts and they look like this:

"C:\Program Files (x86)\Common Files\microsoft shared\Virtualization Handler\CVH.EXE" "Microsoft Excel 2010 9014006204090000"

Which doesn't work when I insert that in "add" to the programs in Setpoint (Logitech's software for VX Revolution mouse)

A:Office 2010 Program Paths?

Have a look in C\Program files\Microsoft Office

9 more replies
Answer Match 39.48%

I just ran a customized install of Office Ultimate 2007. I open Powerpoint, and tried to access the clipart library to insert a clipart image. It gives me an error saying it can't display the clipart, and tells me I have to run Setup again, and choose "Add & Remove Programs" to install the feature; but it doesn't say WHAT feature. I've done customized installs 100 times, and never had this issue. I've also got the Office12/Clipart folder on another partition from a past install. So, I was going to try and go to the Options/Paths like Office USED to have, but NOO can't go there. So, how the #$&& do I fix this issue?

GPL

A:How Do I Find & Determine Paths for Office

Go to Control Panel, Programs and Features
In the list of installed software, select Microsoft Office.
Click Change.
In the Setup box, click Add/Remove Features.
Click the Plus sign next to Office Shared Features
Click the Down arrow next to Clip Art and click Install All
Click Continue
If prompted by Setup, insert the appropriate disk

4 more replies
Answer Match 39.48%

Hi, I was doing a clean-up and accidentally deleted all the environment variable paths. Can someone please give me a step-by-step instruction on how I can fix this issue without having to restore or enter them 1-by-1. thankyou

A:deleted Enviroment variable paths, please help.

You could try the previous restore point prior to the deletion.
Win+R->rstrui.exe

1 more replies
Answer Match 39.48%

Quote:
So, how can I get an Absolute path into my Test Volume's G:\boot\BCD store ??


Using Visual BCD Editor or bcdedit.

VBCDE can edit every single element of BCD - it's a general and professional tool like bcdedit - give it a try.

More replies
Answer Match 39.48%

If I've mapped a drive through the network, I know i can disconnect it, but after that, I need to delete the path from the drop-down list. how do i do that?
 

More replies
Answer Match 39.48%

Having moved a bunch of shared printers from one server to another, I need to change the local printer paths on all workstations - is this something that can be done at a command line, and therefore scripted and placed into a batch file/login script?

I rather think it's going to have to be done with something like VBScript or WSH (about which I know nothing!) but if anyone has any ideas, I'd be pleased to hear them.

Thanks.
 

A:Lots of changed printer paths....

7 more replies
Answer Match 39.48%

I changed the user name from "user001" to "user888". That changed the name on the login/logout screens. But the user folders and paths all stayed with the old name "user001". As a result some things, like the name installed programs will grab and use, are still called "user001".

Is there a way, short of re-installing Windows, to change all the appropriate folders, paths and registry entries to read "user888" and get rid of the old user name completely?

A:Changing the User Folders (and paths)

You may want to create a new account and move the user files over to that new account. Then delete the old account.

A good explanation can be found from Brink below:
Creating a New User Account Similar to an Existing User Account

6 more replies
Answer Match 39.48%

Hello everyone! New here with this problem, hope I'm entering it under the right category (if not, sorry)

I have a local and a network folder embeded in a tiddlywiki page in iframes.
They both contain folders, .doc and .xls files with both greek and english names.
I've set up the open office plugin to show the aforementioned files within browser, so the frames work as
a sort of view area (http://ubuntuforums.org/showthread.php?t=94384&page=2 ).

At the same time I need to be able to open the folders / files in their native windows environment.
The above configuration doesn't allow that as .doc and .xls links open in the open office environment by default.

A number of firefox add-ons (Open With 4.0 / https://addons.mozilla.org/en-US/firefox/addon/11097/,
IE Tab 2 / https://addons.mozilla.org/en-US/firefox/addon/92382/) provide the functionality to open firefox links in different browsers and/or programs.

I've set up explorer, winword.exe and excel.exe as manual entries in the Open With add-on which allows you to right click on firefox links and select to open them with these applications. Other add-ons allow you to do the same thing with internet explorer or a chosen application.

They all present the following problem:

The plugin works perfectly when opening the folder file:///C:/a with explorer
and the files file:///C:/a/a.doc with winword and file:///C:/a/a.xls with excel.exe.

But I get a path does not exist or is not a directory error when... Read more

More replies
Answer Match 39.48%

Hi there,
I have been looking for a simple way to begin to understand the command line in windows. I'm trying to import python code from a folder, and at the moment I can only get my code to run if I save my folder in the default c:\Users\Jamie\<full path>. My question is in two parts
1. How can I run simple scripts from anywhere else (say, my documents)
2. Can I edit paths somehow such that typing % python <script name> will run my script, from the default C:\Users\Jamie, or otherwise?
Sorry if the questions themselves contain errors in understanding, i haven't used the Windows command before

A:Using PATHS in the command line in Windows 7

so you want to do this in command prompt?

python c:\whatever\subfolder\somescript.py


Where is python.exe located?

You want it to work for your account only I assume (?)

9 more replies