Tech Problem Aggregator

configuration error

Q: configuration error

using windows xp on my presario sr1103wm i ran the recovery in the pc repair program and after it restarted all i get is this error message has detected a configuration error (code purple) and the computer is non-responsive help

More replies
Answer Match 43.68%

The rest fo the error message says- "Failed to read configuration file. Please contact system administrator"
I have just R and R'd Firefox and I'm still getting this error message. It won't run now and now I see just how horrible IE is in XP,since I'm forced to use it now....sob
Please Help!!

A:Firefox won't startup-Error message says "Configuration error"

Only an idea!!!!  Not sure but it may be the newer FF may not run well on XP, you could experiment by down loading and older version.
 
Just checked I may be right check the link below!
 
https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp

7 more replies
Answer Match 41.58%

when i try to start a game it says it cannot
open the configuration
 

More replies
Answer Match 41.58%

Hi

I just re-installed windows XP pro on my dell pc,and when i come to switch on the machine ,i get a message before startup saying invalid configuration information.
I have to wait and then it starts up. It has also reset the time and date.

The battery inside was fine before i wiped it-could it be the BIOS ?

Any help would be very welcome
Thank You
 

More replies
Answer Match 41.58%

Hello,

This is the first time here for me, have searched the forum and could not find an answer to solve my problem, maybe I have overlooked it.

Here is the problem, when I turn my computer on I get this error message.

CPU = Intel (R) Pentium (R) 4 CPU 2.00GHz
639K System Ram Passed
638M Extended RAM Passed
512k Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowed
ATAPI CD-ROM: Sony DVD RW DRU-720A
ATAPI CD-ROM: HL-DT-STDVD-ROM GDR8160B
Mouse initialized
ERROR
0162: Configuration Error - Default configuration used

Press F1 for Setup
If someone could give me some guidance it would be greatly appreciated, the operating system is Windows XP Pro.

Thank you
wicewater
 

A:Configuration Error

7 more replies
Answer Match 41.58%

I have an HP pavilion A6303w,every I tried to booted it.It always come with a message stated configuration error code purple...It's a windows vista desktop..I even try to change the windows vista to windows xp..As soon as I insert the cd in the drive,it started downloading just fine.As soon as it started to set up the windows it stop..And come back with that message configuration error..Please help thanks.
 

A:Configuration error.

I have never seen something give an error message "code purple". Maybe it is a BIOS error message? Do you see that "code purple" as you boot the machine or would Windows start running and give you that error ?
 

2 more replies
Answer Match 41.58%

When I try to run SPSS which I recently installed it receive an error message stating that the application can't run because of a configuration error. Can any one help with this? My professor was telling me what that meant and honestly really freaked me out.

A:Configuration Error

It simply means that it didn't install properly/completely...for whatever reason. It's not set up properly for use.Program settings are configured (usually) after install...or using the default settings.Google LinksLouis

1 more replies
Answer Match 41.16%

I'm having this issue

TCServer.ext - Configuration Error

Unable to load Jit Compiler (MSCORJIT.DLL)
File may be missing or corrupt
Please check your setup or rerun setup!

Basically when I did a google search I came up with this patch for what everyone says is a memory leak.

http://www.microsoft.com/downloads/d...displaylang=en

This didn't solve my issue.
The actual issue is that this error comes up as soon as I log into windows and either freezes me straight away or resterts.


- Version of the OS. XP Tablet Edition
- Security Patches - Unknown. I can't use the tablet long enough to check
- If the OS produces an error, either upload a screenshot of the error message (ALT+PrtScrn), or literally quote See above
- Were there recent crashes that could have caused this problem?Unknown
- Did you install new software recently? If this is the case: Which software? (Brand, version, build)Unknown
- Did you do any of the following:
- Run a scan with an updated anti-virus program?No, can't
- Run a scan with an updated anti-Trojan program?No, can't
- Run a scan with an updated root kit detection program? (This only for Windows NT, W2K and newer!)No, can't
- Run anti-spyware scans with at least two freshly updated anti-spyware programs? No, can't
If any of these program found something, provide us with the information on what it/they found. N/A

More replies
Answer Match 41.16%

Friend has and HP a535w that is producing an error, machine boots up until the XP media center splash screen and then an error box appears:System Configuration ErrorThe system has detected a configuration error. Please report this error to customer care using the phone number found in the Warranty and support guide that came with your PC. Unless corrected this error will prevent your PC form operating properly.Turn off your PC by pressing and holding the power button. After a few seconds your PC will automatically turn off. (Code Purple).'i searched google and the only thing i could find http://www.resellerratings.com/forum/tech-...ode-purple.htmlwas that this had something to do with "tattooing" the recover to the motherboard, and a workaround was to attach the HDD to a usable system andopen up C:\hp\bin\ConfigCheck\cfgchk.bat with notepad and modify the section that checks to see if the hard drive is tattoo'd to have it not bother checking at all. (although the hard drive will be running as slave so replace the C:\ with whatever drive letter Windows assigns it) The line to remove is: "python c:\hp\bin\ConfigCheck\run.py". This worked great for me and I hope it helps anyone else who comes along this thread as an alternative to dealing with tattoo'ing the motherboard or hard drive. i did this and cannot find the .bat file, that path does not exist.this machine is out of warranty and we do not want... Read more

A:HP system configuration error

http://www.techimo.com/forum/applications-...ode-purple.htmla couple of pages into this thread seem to have several fixes.

4 more replies
Answer Match 41.16%

I have Windows Me and when i try to boot up i get this error.


Cannot find System.ini.

Boot with emergency boot disc and type scanreg/restore

WHAT Do i do?? I dont have the boot disc. I have another computer with xp and if i need to download a file i can. Any help?
 

A:Registry Configuration error

Take your system to someone who can test your hard drive and reload Windows Me for you
 

2 more replies
Answer Match 41.16%

Recently I've been getting a popup message at boot: Error detected retrieving default

configuration DEFAULT.ALC. I close the window and everything seems to run fine.
Anyone know what that's about or how to fix it??

Machine: Esystems
OS: WindowsXP Home
RAM: 1.5GB
Drive: 120GB
 

More replies
Answer Match 41.16%

I have tried everything but everytime I boot up my computer I get this hardware configuration error any suggestions on what I should or can do?
 

A:Hardware configuration error

What operating system do you use, and what is the brand and model, or configuration of your computer. What tasks are you running when you get the hardware configuration error... or does it even boot.
Tell us as much as you can, so we can imagine what you are up against.
 

3 more replies
Answer Match 41.16%

I'm on ADSL Zoom X3 modem connected to my PC with No other Router connected

when I used a bittorrent for the 1st time (Azureus), I got NAT error problems, this happened to everything I tried.
It tells me I have no remote access & icons stay on yellow?
I checked all the wizard configurations & whatnot, they all told me I have a NAT error

I just want to know if theres anything I can do? because when I switched to my AOL 56k connection, the NAT error was not present there
SO is my NAT messed up or not set up correctly???

I don't have a router so I can't open any ports only on it,
I'm only with my DSL modem, so I went to my DSL setup page

I went to the NAT CONFIGURATION OPTIONS
the screen had this info:

NAT : Enable
Mode: Dynamic

Session: blank (no other options listed but can be typed on)
User IP: blank (no other options listed but can be typed on)
Action: add (& another option for delete)

Number | Session | Name | User IP
# of NAT configurations: 0
I tried switching to disable NAT!
the description makes it seem like hackers can get to my IP & whatnot without it, but I tried anyways, BUT I could not connect to the net anymore after that, I had to re-enable it.

All I know on on Azureus is that in options it states 6881 as the incoming TCP listing port.
there is no Session or User IP info there to find & typing 6881 on User IP just tells me it's an inncorrect IP
can anyone help?
anyone with any knowledge of this??
is it poss... Read more

A:can ANYONE help me with a NAT error/configuration problem??

the other options on my dsl setup page other then NAT are:

WAN settings
LAN settings
NAT
Virtual Server
DMZ
DNS
ADSL Configuration
Route Table
Misc Configurations
Bridge Filtering
RlP Configuration

are any of those helpful to open the 6881 port?
 

1 more replies
Answer Match 41.16%

Hey there,

I'm on windows XP

when it comes to installing many new applications (not pirated or anything) I get this error

"C:\filelocation\program.exe

This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem."

It has happened both for the new MSN (Im stuck using windows messenger) and Ableton Live 8.03

I've obviously tried reinstalling a whole bunch of times, but no luck. Is my only option here reformat, could it be something viral? Or something more simple (i hope!)

Cheers and thanks a lot
 

A:Application Configuration error (XP)

8 more replies
Answer Match 41.16%

I'm using Win 7 ultimate 32 bit. I've a problem when configure DNS. I enter Local Area Connection Properties then click on Internet Protocol Version 4 but it show a window and disappear.

It like this video:

Who can help me, please?

A:Error! can not set up TCP/IP configuration on Win 7 ultimate

Can you access it in safe mode?

9 more replies
Answer Match 41.16%

I have Windows Me and when i try to boot up i get this error.


Cannot find System.ini.

Boot with emergency boot disc and type scanreg/restore

WHAT Do i do?? I dont have the boot disc. I have another computer with xp and if i need to download a file i can. Any help?
Edit/Delete Message
 

A:Registry Configuration error

Yes this was copied from another thread. I posted it in the wrong place
 

2 more replies
Answer Match 41.16%

Immediately after upgrading to IE8, a Wireless Configuration error message began appearing and will not close even when I reboot my Acer Aspire 5600. It reads as follows:

Incorrect MFC Dll version installed on system, minimum requirement is MFC SP4 dll.

I located an answer from Dell for their computers in these Forums, but can't find anything here for Acer. Any help would be appreciated.

Laurie

A:Wireless Configuration Error

do you have a service running called Broadcom Wireless LAN Tray Service
control panel> admin tools> servive

3 more replies
Answer Match 41.16%

Hi, I am actually trying to configure a router, with a serial and fast ethernet interface..
now i have a network address of 192.168.50.1 and i have used 192.168.50.2 for the fast ethernet interface and 192.168.50.3 for the serial interface, but it giving me an error, saying its overlapping the fast ethernet address of 192.168.50.0, is there anything i'm doing wrong there? can anyone help me please...
 

A:Hi everyone i have router configuration error...

6 more replies
Answer Match 41.16%

Hi there guys.

One of my applications, Microsoft Flight Simulator X was working normally for awhile until I encountered a problem where it says the application could not start because its side by side configuration is incorrect. I cleaned everything up by doing "sfc /scannow" in Command Prompt and it solved the problem.

However, when I tried to open up Microsoft Flight Simulator for the second time, the error occurred again. Can I please help some advice on how to stop this re-occurring problem?

Thanks,
Jozef

A:Sidebyside Configuration Error- NEED HELP!

Welcome
It will take a little while, but I will refer this to our forum specialist in this area.

9 more replies
Answer Match 41.16%

Hello there. I hope I have posted this message in the right area. This morning I fired up my pc to find an error greeting me. It was that windows was missing a configuration file. I rebooted a couple of times then it came back up.

Once it did tho, it went through reloading all my hardware. Everything was fine so I thought. I then realized there was no sound. Xp is showing the Realtek onboard sound card there, indicating under Audio Devices, Properties that "This device is working properly" and "Driver is enabled but has not been started". However, under the main Volume tab it shows "No Audio Device".

I have verified under Services that Windows Audio is started and running (set to 'Automatic'). I have attempted to remove and resintall the device, tried alternate drivers, all to no avail. Any suggestions or recommendations on how to proceed would be so greatly appreciated!
 

A:Configuration error...now no sound.

7 more replies
Answer Match 41.16%

ok heres the prob...
today my nephew was playing sims 2 and while he was playing he hit the shelf the tower was on..it fell less than 2 feet and not very hard since the cords slowed its fall...
now when i go to restart it i get this errors:

0162 configuration error
no dhcp or proxydhcp offers were recieved
1962 : no operating system found

im not sure what has happened or what I need to do now.
I was reading online and it said run setup but not sure what that meant.
 

A:0162 configuration error

Run setup probably means run Windows setup. But i think i may know what is wrong. Can you check the hard disk IDE cable, make sure both connections at either end of the cable are securely fixed into their sockets
 

2 more replies
Answer Match 41.16%

System details;
OS Windows 7HP 64bit
CPU AMD Phenom II Quad
Motherboard ASUS M4A79-T Deluxe 790FX
Memory 12BG Corsair XMS3
Video card Sapphire ATI Radeon HD 4890
Boot disk C:\ Samsung Spinpoint 1TB 7200 SATA II 32MB
Problem;
Tried to update Snagit 11 (build 207) to version 12.2.2 (build 2107) but when trying to install the update I get snagitup.exe-Configureation paser error, error parsing C:Windows|Microsoft.Net\Framework\v4.0.30319\config\machine.config Paser returned error 0xC00CE508
 
Would greatly appreciate any help 

A:Configuration Parser Error

Worth a look, Configuration Parser Error .
 
Louis

5 more replies
Answer Match 41.16%

i had the sbc yahoo utilities on my comp with the browser and chat and little things like that and then i uninstalled it and tried to reinstall it and now i get an error half way through saying can not configure to my comp??? howcan i fix this???
Thanks
 

More replies
Answer Match 41.16%

I got this error after I did a Compaq System Recovery.
Your system has detected a configuration error. Please report this error to Customer Care using the phone number found in the Warranty and Support Guide that came with your PC. Unless corrected, this error will prevent your PC from operating properly. Turn off your PC by pressing and holding the Power button. After a few seconds your PC will automatically turn off. (Code Purple)
Help!
 

More replies
Answer Match 40.74%

I can not get past the disk config
the error I get is: Windows could not set a partition to active on disk 0
error0x80300024
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>en-us</UILanguage>
            </SetupUILanguage>
            <InputLocale>en-us</InputLocale>
            <SystemLocale>en-us</SystemLocale>
            <UILanguage>en-us</UILanguage>
            <UILanguageFallback>en-us</UILanguageFallback>
            <UserLocale>en-us</UserLocale>
        </component>
        <component name=&quo... Read more

More replies
Answer Match 40.74%

Hi Guys,
I have recently installed windows developer preview, since installation I'm facing a problem while Outlook configuration.

after done all things when i test account setting it shows "log onto incoming mail server ERRR X fail"
Please guys help me regarding this

More replies
Answer Match 40.74%

Hello! I installed HP BCU because i want to do stuff with my computer. You know... Anyways, every time i start it, it stays open for like half a second then closes. I recorded it, and at the end it shows the message: "<Warning> msg="BCU return value" real="17" translated="17" />" That is what it says right before it closes. Please help me. Thank you for your time, and have a great day!

More replies
Answer Match 40.74%

I was trying to repair a software installation (Iomegatools) by removing and reinstalling this software. My system froze after the installation and I shut down the computer and tried to restart Windows XP. On restart, I get a black screen with white type indicating I have an invalid system configuration. It suggests I run Setup to input the correct date and time. When I get past that it starts to load windows XP but freezes on a blue screen with the Windows XP logo but no User logon information. Any suggestions?

Thanks,

Jon B

A:Invalid System Configuration Error

Have you tried to start the machine in safe mode and use XP system restore yet?

7 more replies
Answer Match 40.74%

I would like to say hello to everybody here. I have a problem. My problem is the nasty dredful Code Purple Configuration Error for HP. I have been working on a HP Pavilian mini tower, and I ended up having to destructive restore it. I then restart the tower, and I get this Config Error code Purple. I don't mess with HP very much (I compac/HP) I have also did my research on the problem, and I know its got a tatoo on the mother board(haven't added any hardware, and the reason for the restore everytime I tried to logon, it would say saving settings and restart) Of course this computer hasn't came with a restore disk, its on a partition of its own. I know their was a lawsuit over HP sending restore disk, and I also know I need to put the hardrive in a different tower and delete a bin file. Here's the problem. I have been fighting with hp over this restore disk and wanting me to pay for tech support. I feel I shouldn't pay for tech support because this problem was caused by them. My question is there away to fix this easier than the other ways shown on this forum. I never have hook up a hp hard drive to a different tower(which I don't think will post any problems, but then when deleting bin files or even locating these file. I am not too comfortable with doing. Will someone either let me know a easy way to fix this or instruct me in which is the best way and the step to fix it. Sorry for acting like a dumby, but i am not trying to mess up this HP comp... Read more

A:Code Purple Configuration Error HP

I'm guessing nobody wants to touch this with a 10ft. pole. I still have the same problem with this HP, and I really don't know what will work to fix this, and if there is a way to do it easier. I have read alot about this subject, but really can't find the correct way to get this up and running. If someone could help that would be great.
 

1 more replies
Answer Match 40.74%

I keep getting this error message at start up. It gives me the option of F1 to resume or F2 to enter set up. When I hit F1 it starts fine enough but I'm concerned about this. Follows is a start up list report and then a hijack this log.

start up list log

StartupList report, 4/15/2006, 8:49:48 PM
StartupList version: 1.52
Started from : C:\Program Files\StartUpList\StartupList.EXE
Detected: Windows XP SP2 (WinNT 5.01.2600)
Detected: Internet Explorer v6.00 SP2 (6.00.2900.2180)
* Using default options
==================================================

Running processes:

C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\GWHotKey.exe
C:\Program Files\MusicMatch\MusicMatch Jukebox\mmtask.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\Program Files\Logitech\MouseWare\system\em_exec.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\WINDOWS\system32\ctfmon.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\PROGRA~1\Symantec\NORTON~1\GHOSTS~2.EXE
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\system32\utilman.exe
C:\Program Files\StartUpList\Startu... Read more

More replies
Answer Match 40.74%

I recently tried to turn on my pc and the boot manager screen is up and no matter what i do for several days now i cant get past this screen someone please help ive tried everything

A:Boot Configuration Error 0xc000000d

See Troubleshooting Windows 7 Failure to Boot

3 more replies
Answer Match 40.74%

couple of times faced with the Illustrator crash and failure to start. Configuration error "Error 3". While trying to fix, found that somewhere lost file "c:\Program Files\Common Files\Adobe\Adobe PCD\pcd.db" (I am talking about Win XP). Tried to clean a temp folder, but this did not help. Scanned for viruses, all clean, as said antivirus. Reinstalling did not help in the matter too. I know i lose sight of something important and i need an advice.
 

A:how to fix Adobe Illustrator configuration error?

howdy and welcome.

I do NOT use Adobe Illustrator, but there are tons of people here who do. One thing I dug up in my digging was https://forums.adobe.com/thread/988381; have you taken a look there yet?
 

1 more replies
Answer Match 40.74%

I have previously been able to print an email in Windows Live Mail. I can print Internet pages and saved documents. Brother Printer support suggested I have a configuration error.

Any suggestions?

Thanks!

A:I have a configuration error that is preventing me from printing.

If you can still print from other applications but not Live Mail then it sounds like something's wrong with Live Mail accessing the printer. Maybe a re-installation of Live Mail is necessary.
My guess is if you provide more info on what exactly it is that keeps you from printing you'll get more feedback here.
Is there an error message? Or any other info to go by?
A print option dialog screen with a number of installed printers etc?

3 more replies
Answer Match 40.74%

I recently booted up my Gateway notebook only to find the "blue screen of death"

I rebooted and it came up to a windows boot manager screen which says windows failed to start..insert installation disc and click repair to fix...blah blah...i'm sure you know the story...

My question is, I booted the Vista disc and when I click repair it doesn't even find the C: drive...when I try and run the BCD fix from the command prompt screen, it says it found 0 Windows installations...would this indicate a faulty hard drive?? If so, I dont mind replacing the drive, I just wanna make sure this is the issue before I spend the money to replace it...

Much thanks for any help anyone can offer!

A:Boot Configuration Data Error

I'm not sure what BCD fix you tried, but see if it is this one and if not, try this one.

To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps: (you need a Vista Installation Disk to do this)

1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. Click Repair your computer.
5. Click the operating system that you want to repair, and then click Next.
6. In the System Recovery Options dialog box, click Command Prompt.
7. Type Bootrec.exe, and then press ENTER.

Note If rebuilding the BCD does not resolve the startup issue, you can export and delete the BCD, and then run this option again. By doing this, you make sure that the BCD is completely rebuilt. To do this, type the following commands at the Windows RE command prompt:
 bcdedit /export C:\BCD_Backup
 c:
 cd boot
 attrib bcd -s -h -r
 ren c:\boot\bcd bcd.old
bootrec /RebuildBcd

See if that works.

If you don't have the disk (or that didn't work), try EasyBCD http://neosmart.net/dl.php?id=1 and see if that helps resolve the problem.

If that doesn't work, you probably have some type of hardware problem - but it's hard to tell. It may be as simple as the hard drive cable got disconnected a... Read more

3 more replies
Answer Match 40.74%

I am running windows XP on a laptop but it stops loading when it gets to the microsoft logo (HDD stops working rather than computer hanging - scrolling bar still scrolling but HDD light stops)

I have started up in safe mode and it says that there is a problem with the configuration of the network hardware. I have tried restoring the computer to a previous setting but this stops working when it restarts at the same period it stopped working before

Please can you provide indepth info as my computer is running in Spanish (long story) and i dont speak a whole lot of spanish!
 

A:Network Hardware configuration error

Delete the network hardware from device manager while in safe mode and reboot.
 

2 more replies
Answer Match 40.74%

Get this message when I go to START,RUN ,WINIPCFG. PLEASE ADVISE SOLUTION TO AVOID THIS MESSAGE.TRYING TO RUN HOME NETWORK BETWEEN TWO COMPUTER 3FT APART.
 

A:fatal error; can not read IP configuration

You need to adnvise which version of Windows you are running, but have a look here anyway:
http://support.microsoft.com/default.aspx?scid=KB;en-us;286748&
 

1 more replies
Answer Match 40.74%

I istalled a new printer/copier/scanner recently and all seems to have gone smoothly. But now whenever I boot the system, load a cd, launch my dsl connection, etc, I get the message "please wait while Windows configures the printer" and/or ""searching for installed components" or something similar. Can anybody help? Thanks!
 

A:printer configuration error message

7 more replies
Answer Match 40.74%

Hi i bought a COMPAQ pc, windows XP desktop in 2003 at a local Best Buy. I was creating a second user account for the system when it froze and shut down. Upon restart, the loading Windows XP black load screen that shows up right after power returns froze and a window came up saying system configuration error. I am currently 20 miles from my house ,and on a different computer obviously, but the i can remember that the error tells me that if problem is not fixed please call the number in my computer manual. I would LOVE to avoid waiting on the phone please help !~~!! please..My only solution i could think of was using the system restore disk but i do not even know if the boot up goes far enough for the PC to read the disk. Please help and thank you for your time.
 

A:System Configuration Error and no Boot up :(

Hi and welcome. See if you can start in safe mode. For a system this old, I doubt you'll get anywhere calling the number in the computer manual anyway.
 

1 more replies
Answer Match 40.74%

Hi everyone. I am getting a Configuration Error on some sites. What does this mean?

Here's the text of the error:

Server Error in '/' Application.
--------------------------------------------------------------------------------

Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Failed to decrypt using provider 'RsaProtectedConfigurationProvider'. Error message from the provider: The RSA key container could not be opened.

Source Error:
Line 12: </configSections>
Line 13: <connectionStrings configProtectionProvider="RsaProtectedConfigurationProvider">
Line 14: <EncryptedData Type="http://www.w3.org/2001/04/xmlenc#Element"
Line 15: xmlns="http://www.w3.org/2001/04/xmlenc#">
Line 16: <EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#tripledes-cbc" />
Source File: C:\www.songtouch.com\web.config Line: 14
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
 

A:Configuration Error While Visiting Certain Sites?

*bump*
 

1 more replies
Answer Match 40.74%

My Father-in-Law brought over the computer we gave him for Christmas and said it was not working. I started it up and got this message "your system has detected a configuration error. Please report this error to customer care...blah blah" I tried a system recovery but it had no effect. I tried clearing the cmos and that had no effect either. I tried using the recovery cd's that I made for it and got a message saying the cd's were not for the correct model?!?!?! What is going on here?

PC Info:
HP Pavilion a430n
XP sp1

Any help would be appreciated, Thanks in advance

-Nate
 

A:Solved: Help with System Configuration Error

12 more replies
Answer Match 40.74%

Hey. Not sure where to post this problem so I just decided to put it in with games. I use a program called DAEMON to use virtual disk drives. Wierd thing is that the first two drives do not have a letter assoicated with them (E:, F and it won't save any changes I make on the main configuration options screen that sets a letter. They've worked before, but I just noticed now that they were gone. Any solution to this baffling mystery?
 

A:DAEMON Wierd Configuration Error

Have you tried setting the number of drives to zero and then back to two?
 

2 more replies
Answer Match 40.74%

I have a laptop that on my wireless school network would connect fine and automatically. The network is a guest network so it is unsecured. I recently had to reinstall the operating system on my laptop to fix several access rights errors and others (reinstalled Vista). After the reinstall I am having a lot of trouble accessing the internet on the school network. The network and sharing chart will occasionally show that I'm connected to the public network and it will also go all the way through to internet access but my pages wont load and I don't have connection (I use google chrome as my browser but thats not the issue).

I've tried:

-Pinging common websites, it comes back and tells me that I have entered the name wrong which is odd.
-Restarting my computer
-Restarting my laptops wireless adapter
-Checked wireless connections at my house and at other network in my computer engineering class, all of which give me full access to the internet.
-Check DNS information I get a DNS error from doing a diagnosis(this I may not have done right so more information would be great). The diagnosis says I can't connect to www.microsoft.com common dns server
-When it says I have internet and I go to a page I get a error about not being able to resolve the server
-Disabling DNS prefetching
-My own IP is pingable which is normal.
Hopefully I can get this fixed soon because several of my classes are online classes at school which will end up forcing me to do a bunch of ... Read more

A:Solved: A sort of DNS Configuration Error?

11 more replies
Answer Match 40.74%

M52 ( IBM Desktop)

Windows XP OS

When i start my computer... it is giving 2 beeps... n then getting
0662 configuration change error...

later cheching mac address...

how to get rid of this error...


i tried to enter in BIOS... selected restore default settings... saved n exit... but still problem is there...

any help appreciated...

Regards,

A:0662 Configuration Change Error

I work on several of these. Really bad design. Very crowded, no air circulation (heat) and underpowered (poor voltage=hard drive errors, system file corruption, etc...)
I assume you've tried this procedure:
http://www-307.ibm.com/pc/support/si...F06-D0212.html

If the settings do not "stick" I would do the following:

Reseat the RAM.
Remove CMOS battery, clear CMOS (test battery while it's out. If it's low, replace it.)
Try disconnecting all peripherals (hard drive and optical drive) and see if the problem changes or stays the same.
If you can't get the symptom to change at all, I'd try reflashing the BIOS as a last resort. The motherboard might be bad. Might be power supply. Those power supplies cost more than the whole box is worth. Is this your machine?

2 more replies
Answer Match 40.74%

Hi
Having problems with connecting to my xbox 360

main problem is when media center is configuring extender and computor it ticks the first two boxes but on the configuring extender settings it take a long while before it comes up with

CONFIGURATION ERROR

An error was encountered while configuring your computter for use with this Extender.

Have tried the deleting of Certifiacate in mmc - still does not work
any clues please

Jeff

A:xbox 360 extender configuration error

I too am having the same problem but i don't even get the first tick.
Its not my Anti virus Firewall issue.
It is a modem/router port firewall issue.
What modem are you running?

3 more replies
Answer Match 40.74%

Received error message:
Windows Boot Manager
An error ocurred while attempting to read the boot configuration date.

The instructions are to insert the Windows disk and restart the PC, however I can't get past this screen. When I restart I end up on the same screen.

How can I get past this error screen?

Thanks.

A:Boot Configuration Error Screen

Try following these steps. an error occurred while attempting to read the boot configuration data (Vista)

5 more replies
Answer Match 40.74%

hi,

also, each time i start the computer, there is the following message - error failed to load branding configuration -. couldn't find anything on the web. What could it be ?

THANK YOU

A:error message branding configuration

You really shouldn't duplicate post, if not for the integrity of the forum, then so that everyone knows what you are being told and you will not be pulled down two or more pathways to a fix, yano. but no foul, no harm, just acting on your behalf (and SF's)

Mike

1 more replies
Answer Match 40.74%

The last time i played sims 3 was last night. I fell asleep with it on and when i realized what happened i tried to save it and shut down. No actions could be done it was froze, so i restarted and tried to play again and got error

Error Parsing
C:\Windows\Microsoft.NET\Framework\v2.0.50727\config\machine.config

Parser returned error 0xc00ce556.

I dont know ANYTHING about computers please help!!!
 

More replies
Answer Match 40.74%

I have a COMPAQ laptop,Windows XP Home Edition
Each time I start up my computer, the following message shows up:

"You have used the System Configuration Utility to make changes to the way Windows starts. The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the utility to run every time Windows starts. Choose the Normal Startup mode on the general tab to start Windows normally and undo the changes you made using the System Configuration Utility."

I have already checked the "Normal Startup" box but after restarting, the message pops up again.
I can't even connect to the internet, and my anti-virus doesn't detect anything bad. HELP PLEASE!!
 

A:System Configuration Utility error

9 more replies
Answer Match 40.32%

I posted this in "Hardware", which might be the wrong place, so here it is:

I resurrected a Dell 8200 and it was working fine until I tried to connect a ViewSonic 23" monitor. Suddenly I got the "plug and play configuration error, strike f1 or f2, etc." Can't make heads or tails out of it so I powered off then back on then hit f12 when the Dell logo came up. I am now at the DOS prompt as I'm sure something can be done from here. Anybody have a recipe I can follow to get this thing booted up? I really need this old machine to work as it is the only computer I have that will talk to my Konica Minolta color laser printer, but that's the subject for another thread.

I cannot download TSG SysInfo on a computer that won't boot.
 

A:Plug and Play configuration error Windows XP

the other forum is fine, and we dont like duplicates here - so closing this post
 

1 more replies
Answer Match 40.32%

Supermario, my name is cher and im in trouble. Im disabled and i cant find my disc. I have an hp pavillion all in one desktop hp pavillion 23 all in one. My screen pulls up the startup menu. Can u help me? My email is [Personal Information Removed] and i can give you my phone number. I REALLY need help. Thank u so much

A:Re: Your system has detected a configuration error. Code pu...

 Code Purple is a hardware failure.  You need to contact HP direct.

1 more replies
Answer Match 40.32%

Hello all,

I was wondering if there was any way to solve the Dell Plug & Play Configuration Error on startup. I've read that it has to do with the IRQ, the CMOS battery or maybe even a bad motherboard.

I've got a monitor/color problem. It's tinted green and it's dull. Could this be a symptom?

I'm pretty tech savvy but I don't know much about editing the BIOS.

Does anyone know if this can be fixed? I'm going to reformat the HD anyways. Do you think that will help?

Thanks in advance for any help you can offer.
~Mz
 

A:Solved: Plug & Play Configuration Error

Bump
 

1 more replies
Answer Match 40.32%

I recently ran out of ink on my Cannon MP830, I used my HP office jet G85 to complete a few printing operations, then I switched back to the Cannon MP830. I tried sending printing jobs to it but I get an error warning to check printer configuration. Everything looks to be correct but says 3 jobs pending. Printer status shows nothing in que. Any suggestions?

A:when I try to print error, check printer configuration comes up

Go to Devices and Printers Right click your Canon MP830 printer and make it the Default Printer

3 more replies
Answer Match 40.32%

This a.m. I was greeted by this System Configuration Utility message popup:

You have used the System Configuration Utility to make changes to the way Windows starts.

The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the Utility to run every time Windows starts.

Choose the Normal Startup mode on the General tab to start Windows normally and undo the changes you made using the system Configuration Utility.
-----------------------------------------------------------

Yesterday I used the system configuration utility to untick a program in the Startup menu. Is that why I am getting this message now?

If I follow the directions and select the Normal Startup option, will all the services that I have painstakingly turned off over time start running on startup again? Or will it just load the one application it changed?

Could I restore the registry from a few days ago instead? And, if I do that, will the tracking cookies I finally got rid of by setting them to be deleted at start-up reappear?

Another question I have is, what is the utility used for, if not to make changes? Is it just to look at? What good is it then?

HP Pavilion - Pentium(R) 4CPU
160GB HDD 512 MB RAM
Windows XP SP2 Home
 

A:System Configuration Utility Error Message

12 more replies
Answer Match 40.32%

I'm getting these two error messages towards the end of the installation of Impulse:
1: Error Parsing
RegASM.exe Configuration Parser error
C:\Windows\Microsoft.NET\Framework|v2.0.50727\config\machine.config
Parser returned error 0xC00CE556

2: Error Parsing
Impulse.exe Configuration Parser error
C:\Windows\Microsoft.NET\Framework|v2.0.50727\config\machine.config
Parser returned error 0xC00CE556

I've already tried a clean install and a reinstall of .NET Framework. Please help, this program is essential. Already tried compatibility mode, too, with no effect.

A:[SOLVED] Configuration parser Error during and after install

Addendum: Stardock support says this is not a problem with Impulse itself, and the Microsoft support system hasn't been helpful. Need third-party support; namely, this tech forum.

3 more replies
Answer Match 40.32%

Several times, and only from a cold boot, I get a pop-up stating "Boot Configuration Editor Has Stopped Working" However everything loads okay and functions. What might be causing this and what does it mean. IE: What function does this editor serve?

SYSTEM SPECS

INTEL I7-920 PROCESSOR
WINDOWS 7 HOME PREMIUM 64 BIT
12 GB TRI CHANNEL DDR3 SDRAM AT 1333 MHZ
ATI RADEON HD5670 1GB GDDR5
1 TB 7200 SATA 3.9 GBS 16 MB CACHE
CREATIVE SOUNDBLASTER X-FI
DELL WIRELESS KEYBOARD AND MOUS


Dave K.

A:Boot configuration data editor error win 7

Run Startup Repair on a cold boot.

More info on BCD here: http://technet.microsoft.com/en-us/l...8WS.10%29.aspx

5 more replies
Answer Match 40.32%

I apologize if this post appears disjointed, I can't seem to get the browser to properly show spacing.So I was browsing the internet normally, then all of the sudden, I'm disconnected. When I reconnected, I was able to access the network, but unable to connect to the internet. After attempting to diagnose the issue, I got the "There may be a problem with your Domain Name Server Configuration." ... can't connect to well known host microsoft.com.

I know the server isn't down, since I can use another computer to access the internet. I've tried flushing the DNS cache, I've tried inputting the DNS IP manually, I've tried uninstalling and reinstalling the driver, nothing worked.

I don't have access to the router, as I'm using a Motel network. I’m using Vista SP2, I am using a Netgear Wireless Adapter: WNDA 3100. Shown below are the results of Ipconfig, and NBTSTAT -N.

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Lilliana>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Lilliana-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E ... Read more

A:Vista: Domain Name Server Configuration Error

11 more replies
Answer Match 40.32%

Hi!
I'm working on a HP computer running XP Pro. When the computer would try to boot up to Windows an error message would appear stating that there was a configuration error and to contact the manufacturer. Then in paranthesis (Code Purple).

I did a search for Code Purple on the internet and got a number of hits, but only one seemed to have any suggestions for a solution.

This is what I found out and this is what I did (Some of these I copied and pasted from this blog - but just changed them to indicate specifically what I did I don't want to take credit for their great suggestions - the blog is at: http://www.billoblog.com/billoblog/?p=152#comments )

Code Purple indicates that there was a booby trap placed in HP and Compaq computers in which a “tattoo” or numerical signature of the motherboard and hardware configuration is created at the factory and encoded into the restore disks on a particular computer. When you re-install your system, it checks to make sure the system h I removed the hard drive from my Pavilion and put it in the other system. I then looked for the file that was doing the anti-piracy check. I found it at:

I removed the hard drive from their Pavilion and put it in the other system. The writer of the blog had found the file that was doing the anti-piracy check at:

C:\hp\bin\ConfigCheck\cfgchk.bat

The cfgchk.bat file contains the following:

c:\hp\bin\hpdmi r > dmiout.txt
python c:\hp\bin\ConfigCheck\run.py
del dmiout.txt
cd ..
rd /s /q c... Read more

A:Code Purple Configuration Error HP/Compaq

16 more replies
Answer Match 40.32%

running winxp

tried tweaking some startup stuff to cut down on what was running to help speed up my comp and deleted some unused programs,which i think must have had the dll file in it....

dunno what i did wrong as i thought i turned everything back to the way it was but im still getting this stupid error,again i am thinking the notification dll files were possibly in one of the old programs i deleted

"Notification dll
has not been registered program will not work correctly"

immediate upon bootup and starting to access my desktop i get that error

network connections is empty

i cannot drag and drop now either

i cannot access any wireless connection to get online with that laptop and download any fixes or anything

tried a few other fixes i found elsewhere,none worked and gave me this message when i tried

ethernet adapter wireless network connection 2:
media state........:media disconnected

ethernet adapter local area connection:
media state........:media disconnected

and if its relevant and helps solve it, as soon as i hit enter, i can get around on y desktop minus the toolbar,yet immediately it pops up not one but two of the same folders system32

and in the services section,it will not let me start alot of the various services that seem like they need to be running to access my wireless stuff

any help is appreciated,thanks
 

A:wireless configuration notification dll registry error

15 more replies
Answer Match 40.32%

I resurrected a Dell 8200 and it was working fine until I tried to connect a ViewSonic 23" monitor. Suddenly I got the "plug and play configuration error, strike f1 or f2, etc." Can't make heads or tails out of it so I powered off then back on then hit f12 when the Dell logo came up. I am now at the DOS prompt as I'm sure something can be done from here. Anybody have a recipe I can follow to get this thing booted up? I really need this old machine to work as it is the only computer I have that will talk to my Konica Minolta color laser printer, but that's the subject for another thread.

I cannot download TSG SysInfo on a computer that won't boot.
 

A:Plug and Play configuration error Windows XP

I'm hoping that I just misunderstood what you typed and you weren't connecting the monitor while the PC was powered ON. If not, lesson learned. Aside from Plug and Play hardware, don't connect/disconnect anything while the PC is powered ON.

With that said, try manually clearing the CMOS. If you need step by step instructions, they should be available on the Dell website.
 

1 more replies
Answer Match 40.32%

i've had a heck of a time getting my PC to work properly since i accidently loosened my PCI tray when trying to install a new video card. because of that, my original modem quit working. i've since finally got the video card working and my other modem working by juggling PCI slots and re-installing drivers.

but now every time i start my PC, i get a nagging "plug and play configuration error" that won't let me get into windows until i push f1 or f2. i tried f2 once, but couldn't make heads or tails of the technobabble.

today i tried removing the onboard video card from my system, but now my PC is trying to reinstall it! no means no! aside from that, i'm still getting the erros.

where and how do i fix these errors, and make my PC quit trying to reinstall hardware i don't want it to use? as far as i'm concerned, when i shut something off, my PC should OBEY and not argue with me.

i searched all over to find where i could turn that darned card off as win 98 won't let me remove it in control panel>display (which should LOOK like a control panel and not a toolbox which is why i can never remember what it's called) which also has a second driver for my new video card as i made the mistake of installing the driver before the card the 1st time. maybe THAT is the error, but i can't find anyplace to remove video drivers like i could for modems.

by the way, why won't win 98 let me send a shortcut for my control panel... Read more

A:plug and play configuration error win98

16 more replies
Answer Match 40.32%

I have a Dell 8250 running XP. I haven't installed anything on my computer lately; however, when I started the computer this morning, I got 3 plug & play configuration error lines followed by the f1 or F12 option.

When I go into my device manager, both the NVIDIA Geforce 4 MX420 display adaptor and the VIA OHCI Compliant IEEE 1394 Host Controller say they cant find enough resources and are giving a code 12 error. Can anyone help me get this straightened out? Liike I said, this started out of the blue, without me installing anything new.

Thanks!
 

More replies
Answer Match 40.32%

Yes im trying to resolve a systems configuration error code purple. computer is a compaq desktop windows xp 3 thats quite old .no new hardware has been installed but on startup i get that message.read a lot of post on this but cant resolve this.lost my copy of the OS.when i run safemode recovery no luck there ,then i did a destrutive recovery,that i dont think i should have done.would that complicate things with out haveing the orignal os cd. i would appreciat any updated input or ideas on the systems configuration error code purple
 

A:systems configuration error code purple

When exactly do you get the message? Is it before Windows starts to boot? How does the message appear? Is it white lettering on a black background?

Does the machine boot? If so, how (What do you have to do after you see the message to get it to boot)?
 

2 more replies
Answer Match 40.32%

I am at a loss...PC Cillin worked fine and today I get "Error reading Configuration Files". I can get a quick spash screen by clicking the icon in the task bar, but cannot get to the program to check or change anything....suggestions????
 

A:PC Cillin Error reading configuration files

BUMP!!

Here (attach) is the error message:
 

2 more replies
Answer Match 40.32%

Hi,
I have been looking all over the net to find out what this problem is, but alas, nobody has been able to identify it. Basically, my computer had a blue screen that flashes with the message HP Invent, that goes by rather quickly, followed by a black screen with safe mode options et al. When attempting a recovery I got the code purple error. I have read several people mention a motherboard issue that is not 'tatooed' correctly. But this motherboard is the original that came with my PC in 2003! There have been no upgrades in at least four years. The only new addition has been a Sony monitor recently. Please can someone tell me what this Code Purple error is, and how to resolve it. Time and assistance will be gratefully received.

Regards,
 

A:Windows XP: Configuration Error - Code Purple

If its the motherboard going bad all you can do is replace it if you so choose.Motherboards can be expensive to replace and they dont last forever.
 

3 more replies
Answer Match 40.32%

Have a HP compaq 6300 pro running windows 7 pro. today computer would not boot,
 
black screen came up it asks me to insert installation disc
 
scrolling down it lists the following
 
file \boot\BCD
 
Status: 0xc000000f
 
info: an error occurred while attempting to read the boot configuration data.
 
 
 
unfortunately since windows came preinstalled there was no installation disc
 
when I went to the windows support site to download one https://www.microsoft.com/en-us/software-download/home
it said since it was preinstalled to contact manufacturer.
 
my support/ waranty with HP for this computer has ended
 
Thanks in advance for any assistance in this matter
 
Bob J
 

A:error reading boot configuration data

If you have access to another Windows 7 computer create a System Repair Disk. Boot it and do a Startup Repair. It may take up to three attempts to fully do the repair. If you have 64bit then you would need to find a Windows 7 64bit computer.
 

2 more replies
Answer Match 40.32%

I get an error message when I open Itunes. It says "Itunes has detected a problem with audio/video configuration..." and that the audio video may not play correctly.

I have uploaded some cd's to Itunes and I have noticed the sound has skips in it.

Also, my daughter wanted to open some pictures from a disc but the disc wouldn't work. I took the disc to work and opened the pictures fine.

I have a Dell Dimension 8200 running XP. I do not have any other problems with the machine.

Are there diagnostic programs that I might try to correct this problem, or do I need to replace the cd drive?

McChuck
 

More replies
Answer Match 40.32%

Ok so, first of all I hate subnetting. Secondly, please find the attached picture. Now, the configuration error in this diagram is 'the subnet mask is improperly connecteed for the network'.
Click to expand...

Please someone put me wrong, but so far I think this network will still operate, It just wont make use of having 2 different subnetworks. With the mask of /27, all client computers fall into one IP range, which is 192.168.2.160 - 192.168.2.191. The answer also states that a subnet mask of /28 should be used. If /28 is used, then Client A & B will be in their own IP range, and clients C & D will fall into their own IP range aswell.

As it stands, without rectifying the mask this network should still operate correct?

Thanks in advance guys!
 

A:Subnetting diagram - find the configuration error!

6 more replies
Answer Match 40.32%

Hi,

I have Vista 32 bit Home Prem and am trying to change the settings on the Backup program. It was working fine up until 3 weeks ago, when my external h/d was accidentally dropped, then the backups failed from then on. I now have a brand new external h/d.

The program detects the location of the h/d just fine, however when I get to the screen asking which disks to backup, the program is not detecting the C & D Disks. It says Unknown (C) Missing, total size 0 bytes; same for the D Drive.

The program allows me to continue with the setting changes and I get all the way to the end and I get this error message:

Back up Configuration is not valid - error 0x81000029.

I've attached images of the screens with the error message.

I'm growing very frustrated by all of this as I REALLY need to back up my data!

Thanks,

Colleen

More replies
Answer Match 40.32%

Does anyone no how to fix this? Yesterday I got a UAC Zero Access Virus and tried using windows repair disc to go back to a restore point. That just made everything worse and now I can't boot into windows at all. I have a multiboot PC (its set to just windows 8 and windows 7 right now, windows 7 being the biggest partition on the drive).
 
Recovery
Your PC needs to be repaired
 
The boot configuration data for your pc is missing or contains errors.
 
File:\Boot\BCD
Error code: 0xc000000f
 

A:The Boot Configuration Data For Your PC Is Missing or Contains Error

Can you boot into either of the two operating systems?

15 more replies
Answer Match 40.32%

Hi,

Below, see XP virtual machine configuration Error Msg. indicating: "User does not have sufficient access rights".


Yet the next image: "Never notify me when", indicated I am at the lowest UAC level. Or are the lower levels represented by Easter Eggs?


Also, note the Windows XP mode is installed, but because of the XP virtual machine configuration msg above, I can't go further.


I have Googled this situation to no avail. Found a few vague postings but they have lead to dead ends.

Any help, suggestions will be much appreciated.

cheers,

klxdrt

More replies
Answer Match 40.32%

I am working to configure EMET within Group Policy before deployment but I now have an error at the bottom that states: "DEP/ASLR changes are unsafe and ineffective by default..." Current settings are: DEP=Always On, SEHOP=Application Opt Out,
ASLR=Application Opt In. Any recommendations on how to remove the error?

More replies
Answer Match 40.32%

hello....i have been using win8 for 2 weeks now and all has been great but this morn i try to go online and get the error of invalid ip config. been working on it for several hours to no avail. can anyone tell me whats going on please?

actually, i restarted the network and win8 fixed everything....all the win7 pc's were working while win8 did not......if someone can let me know how to remove this thread will be appreciated.

A:WiFi doesnt have valid IP configuration error

The thread doesn't have to be deleted, would be good for others to ad later on.

1 more replies
Answer Match 40.32%

OS: Windows 7 Home Premium -- Service Pack 1, 64-bit
Browser: IE 9
Computer: Dell Studio 1745

I am receiving an error message window titled "Wireless Configuration" with the following message:

"OLE initialization failed. Make sure that the OLE libraries are the correct version."

I cannot find anything about updating OLE libraries in Windows 7. I have not installed any new software, and my computer is barely 2 years old. I do not find it a coinicidence that my free Dell tech support expired last month, and now I'm having issues with the Dell wireless card.

Thanks for any help you could provide.
 

A:Solved: Wireless Configuration Error Message

8 more replies
Answer Match 40.32%

I have done everything i possibly can that i know of using the internet (F10, F5 F8 etc), i even called and got no help except more it will cost you $60 to get a number and i asked what is the number for where? No answer Last week, the computer no longer got past the microsoft logo (note no discs of any kind came with the computer, just it the mouse and the keyboardy from Best Buy) and no there isn't extra warranty on it. Ok i did system recovery, didn't work, system restor to last point it was working didn't work. Now it has obviosuly recognized i did a recovery so it goes to the logo screen and then the white box "Configuration Number Error)" comes up. Tells me to call HP to obtain it and the story goes on. Is there any backdoor tricks to obtain the config number, or of any fixes you know.I was wondering if it was a complete hard drive fail.  Any help is grealty appreciated! Thanks,Rosemary

More replies
Answer Match 40.32%

Hi Everyone,

I have System Restore enabled on my Windows 7 Computer however there are 0 bytes allocated to Restore Points -

When I attempt to allocate space I am met with the following -

I click OK and then...

I do have adequate space on my drive -

I have tried turning System Restore On & Off and this has not improved the situation.

Any advice will be greatly appreciated.

Kind Regards,

Davo
 

More replies
Answer Match 40.32%

I need to set up three user accounts on two computers the accounts on each computer is going to be monitored.
Each user will be assigned access for certain folder or files and certain applications, like internet explorer.
And all usb ports and dvd drive will be blocked. Only the admin will be allow to have full access.

So i need to do something that allow ( managers) to monitor employees activity on the system during working hours.

On one pc is windows xp pro on the other os windows 7 home premium.

Any idea how i can acomplish this task?

I.was thinking of group policy on both computers but on home premium there is not group policy.

Also the users will be using almost all the same programs and files just the with different information.

Thank you in advance.

A:group policy configuration and computer configuration question

Read this
But for Windows 7 Home Premium you will not have the
Local Security Policy so you may need to upgrade to Windows 7 Pro for that.

This is easier to control with a server like Windows Server 2003 or 2008.

2 more replies
Answer Match 39.9%

Hi, I was running Windows 7 on a Dell Vostro 3700 Laptop..After doing a spyware scan and finding and deleting all the entries I found, the next time I turned it on I get the error: oxc000000f "An error occured while attmepting to read the boot configuration data File: \Boot\BCD"

I have looked online for solutions and tried using the Windows 7 disc (a copy) and also tried using 3 recovery disks, these all fail because it just stays completely black with a cursor (left for hours even) or I get a error message something around the lines of "insert correct boot media into the correct boot device" and I have no idea what this means. I cannot do a repair because I can only get the Windows disc to load if I remove the hard drive?? this is the only way I have got it past the green loading bar, so I am stuck and have no idea what to do..it only seems to respond to cds if the hard drive is removed?.. this all happened very suddenly and now I have a very expensive ?800 paperweight.. Any help massively appreciated!

To add to this - I also tried the command prompt typing the bootrec.exe code that I found on the internet..selecting command prompt from the option when the Windows 7 disc was loaded, but basically it came up with an error of some sort and it had a drive letter of X:/ on the command prompt ?? ..Also to get to this the hard drive was removed because like I said I cannot get the discs working with it in.. I'm guessing this means the hard drive is screw... Read more

A:Error oxc000000f Need help repairing Boot Configuration Data??

Are selecting the optical drive as your boot device for the windows install disk? sounds like maybe with the hard drive removed its defaulting to the optical drive and booting correctly. Also, make sure you have a good copy of the windows disk.

8 more replies
Answer Match 39.9%

Greetings:
 
I am using Windows 7 professional.  I have Adobe Acrobat Professional XI, Photoshop CS6 and Lightroom 6 installed.  When I try to run them I get this message: 
 
      Configuration error:
      Please uninstall and reinstall the product.
      If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
     Error:16
     http://www.adobe.com/support/
 
I have uninstalled, reinstalled, google adobe support.  Nothing is helping.
 
Any ideas?
 
Thank you.
 
Smorton

A:Adobe products quit working-Configuration Error

I now notice that if I open these programs as administrator they work.
 
Anyway I can change them to work as I usually log in?
 
Thanks
 
Smorton

0 more replies
Answer Match 39.9%

Help I can't get past the booting error and there is no way for me to pass this? I've tried many things and can't get past it

File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data.

OS: Vista x64 Bit

A:Error while attempting to read boot configuration data?

Please see this article. It has some suggestions. https://neosmart.net/wiki/0xc000000f..._48120c000000f

1 more replies
Answer Match 39.9%

hi!

I got on Outlook this message:

One or more rules could not be uploaded to Exchange server and have
been deactiveated. This could be because some of the parameters are not supported
or there is insufficient space to store all of your rules.

any ideas?
thx!!

gicio
 

More replies
Answer Match 39.9%

Hi, thank you. glad to be the newest member here. I have an Aspire S3 laptop Windpows 8 to 8.1 - that now has a BCD error blue screen upon start up that is error OXCOOOO0D - boot configuration data Recovery

Blue screen reads:

Your PC needs to be repaired.
The BCD is missing some required info.
File:\BCD
you'll need to use recovery tools...

I don't have an install/repair cd/dvd, and I don't have my product key - since its on the BIOS and is unretrievable. I want to save ALL my files so, please, if someone can help, thak you! All I tried so far is to get into the BOOT by pressing F2 and switched it from UEFI to Legacy only it asks for BOOT disk...

A:windows 8.1 error 0xc00000d boot configuration data

Bump.........

9 more replies
Answer Match 39.9%

It is me again, Dudeofthed, asking for support with Windows XP .

I have a windows firewall error which doing so will not allow me to view the firewall settings to allow me to surf the internet as my connection cuts off after installation of SP2.

Here is my error message:
"Due to an unidentified problem, Windows cannot display Windows Firewall settings."

Need support fast,
Thanks.
 

A:Windows Firewall Error - Cannot display settings/configuration.

"Windows cannot display Windows Firewall settings" error while accessing Firewall settings in Windows XP Service Pack 2
http://windowsxp.mvps.org/sharedaccess.htm
 

2 more replies
Answer Match 39.9%

My Dell Insperion 15 now has this boot error. I tried using the recovery USB from my HP. It is smart enough to know that I'm not trying to reboot the HP computer so it doesn't work. This is so frustrating. What to do?

A:windows 8.1 error 0xc00000d boot configuration data

Check HDD with this: Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
Test your RAM: RAM - Test with Memtest86+ - Windows 7 Help Forums
one stick at a time eight passes per stick
Drive letters in WinPe will probably be different from what you see in windows - that is normal.

I would delete the bcd store and run the commands again. You should be pointing them at the reserved system partition .

Otherwise, at cmd prompt, type:

diskpart

lis vol

( Look to see the drive letter for your main windows partition - if it is D then type as below, otherwise replace D with the letter diskpart gives for the main windows partition)

sel vol d

act

exi

bcdboot d:\windows /s d:

bootsect /nt60 all /mbr

restart the pc - you're good.

7 more replies
Answer Match 39.9%

I had this error when I was trying to open a file in Microsoft Access. I believe this is the first time I have opened a access file and that's why it started to configure. Any solutions? Excel, Word, Power point and everything else opens just fine.

A:Microsoft Professional Plus 2010 Office Configuration Error

Something here could assist:
Error 1935 when you try to install Microsoft Office 2010 or 2007

1 more replies
Answer Match 39.9%

I have a RCN-PX30t-A-119 - Qosmio PX30t-A-119 23" Touchscreen All in One PC Core i3-3120M 8GB RAM 1TB HDD

Everytime I try and configure my external Microphone i'm getting the message 'Windows Shell Common DLL has stopped working' and the Microphone doesn't work. Can anyone help me fix this?

A:Qosmio PX30t-A-119 - external Microphone configuration error

Hi Howie

Just for better understanding can you please explain to us what are you doing exactly and which steps you do before this error message occurs?

3 more replies
Answer Match 39.9%

Hi Everyone,

I have System Restore enabled on my Windows 7 Computer however there are 0 bytes allocated to Restore Points -



When I attempt to allocate space I am met with the following -



I click OK and then...



I do have adequate space on my drive -



I have tried turning System Restore On & Off and this has not improved the situation.

Any advice will be greatly appreciated.

Kind Regards,

Davo

A:[SOLVED] Error with System Restore Configuration in Windows 7

You seem to be trying to keep restore points on a backup drive.
How the System Restore Utility Uses Drive Letters

4 more replies
Answer Match 39.9%

Hello,

Some History: I ran Secunia Online Software Inspector as part of another Topic related to clearing up some malware. I got a message that i needed to update Adobe Reader 7.X. When i hit the link, it gave me a Windows Installer error message: The upgrade patch cannot be installed because the program to be updated may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be updated exists on your computer and that you have the correct upgrade patch. I verified that Adobe Reader 7.X was in my program files. Tried to delete it there and also in Add/Change progams, but got an error message...Error 1327. Invalid drive: h:\. I was refered to another topic that discussed remapping registry/drive assignments, and I found that there were a few items that were mapped to drive H which i changed to drive C. This resolved my issue and i was able to download and update Adobe Reader 9.1, the latest version.

However, when i tried to use Adobe Reader 9.1, I get the following error message:

" This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem "

I've tried uninstalling, reinstalling v9.1 and also reinstalling v.8. I continue to get the same error message. I'm not sure if I created a problem when I redirected the drive mapping as mentioned above.

I've also noticed a lot of Error lines in my Event Viewer / Systems.

Any sugg... Read more

A:Adobe Reader - cannot launch, application configuration error

I'd say ditch Adobe altogether and try Foxit Readerhttp://www.foxitsoftware.com/pdf/reader/Much better and less bloated

8 more replies
Answer Match 39.9%

So today I went to use my computer when all of a sudden I got a message giving me the 3f0 error. I ran a diagnostics test and it said it could not detect the hard drive. I decided to open the pc ( p7-1234) and make all the wires were plugged in (which they were) then tried again. It didn't work so I did some research.I found a bunch of post on forums about people saying open up you secure boot configuration menu and enable legacy bios. The only problem is I don't have that option under the security tab or anywhere to be honest. Can any one tell me what to do now?

More replies
Answer Match 39.9%

I have a Dell and won't boot giving a black screen but will boot after about 10 turn on and offs. It is very annoying and have uploaded the latest drivers for the system. Since installing Windows 7 there seems to be this erratic problem with the Dell XP. Anyone have an idea about how to fix this problem?

A:[MOVED]Re: Boot configuration data editor error win 7

Moved from this topic: http://www.techsupportforum.com/f217...ml#post2898619

1 more replies
Answer Match 39.9%

HP Pavilion a522n.  I just did a full recovery using a DVD I created when I bought the computer.  The following message appears:Your system has detected a configuration error. Please report this error to Customer Care using the phone number found in the Warranty and Support Guide that came with your PC. Unless corrected, this error will prevent your PC from operating properly. Turn off your PC by pressing and holding the Power button. After a few seconds your PC will automatically turn off. (Code Purple)" I first did the HP PC System Recovery and got the above message, so then tried the DVD I created.  Both get the same results.what do I do now?

A:Your system has detected a configuration error. Code purple

Thses may be very helpful:http://h30434.www3.hp.com/t5/Desktop-Operating-systems-and/Code-Purple-Error-Help/td-p/359373 http://www.question-defense.com/2010/07/24/hpcompaq-system-configuration-error-code-purple-windows-v...

9 more replies
Answer Match 39.48%

Hello everyone, I hope this is the right subforum to ask this question, I googled alot, but none of the solutions I have found work. Perhaps someone might be able to help me here. I have a Sony Vaio with a built in microphone, which works perfectly. I'm running Win 7 Home Premium x64. Now when I first started Windows Speech Recognition it guided me trough the tutorial, everything worked perfect, the mic understood everything. But after the tutorial was finished and I acutally wanted to start using the program I get the following error, and it instantly closes:

********
Speech Recognition could not start because the language configuration is not supported

The recognizer language must match the language of the user interface. Please change the recognizer language in the Speech Recognition control panel under Advanced Options
********

One thing I saw in a thread and that I tried was

Control Panel > Clock, Language, and Region > Region and Language: Changed Format to English (US)
Changed Location to United States
Changed Keyboard layout to English (US)
Changed System Locale to English (US)

The Speech Recognition Language Control Panel > Ease of Access > Speech Recognition > Advanced speech options:
Changed Language to "Microsoft Speech Recognizer 8.0 for Windows (English - US)"

I tried all this for the UK version too, but it didn't work either. When I try the option "Train Profile" it works perfectly again. Others said that re-installing W... Read more

A:Windows Speech Recognition - Error: language configuration not support

you could try the Repair option, see here:

Repair Install[2]=General Tips

1 more replies