Tech Problem Aggregator

Software/drivers incompatibility

Q: Software/drivers incompatibility

HELP, HELP,

I recently purchased a new ASpire (ACER) computer with VISTA already loaded. I am not able to use my printer (Lexmark) drivers are not yet available to run with VISTA and there is another software I use for personalized books, which is not compatible and they say it will not be for about six months.

What are my options; I'm told VISTA is the os of the future as far as Windows is concerned.

I feel like I should take it back and find a system with XP OR I was told I could load XP on my current system - I am not sure about this.

What are the pros and cons to the above?

PLEASE HELP.

Myday

A: Software/drivers incompatibility

11 more replies
Answer Match 58.8%

Dear Bleeping computers

I have just trid to install Picture Motion Browser from a CD that came with my Sony camcorder. It was all going well until it came to restarting the computer, at which point an "end program now" box came up. I pressed cancel, hoping to sort it out before it restarted, but it restarted immediately and then a BSOD appeared saying:

A problem has ben detected and windows has been shut down to prevent damage to your computer.

If this is the first time you have seen this Stop error mesage screen, restart your computer. If this screen appears again, follow these steps:

CHeck to be sure you have adequate disk space. If a driver is identified in the Stop essage, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.

Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe mode to disable components, restart your computer, press F8 to select Advance Startup options, and then select Safe Mode.

Technical information:

*** STOP: 0x0000007E (0xc0000005, 0x8932F2C0, 0xA5644BE8, 0xA56448E4)

Beginning dump of physical memory
Physical dump complete.
Contct your system administrator or technical support group for further assistance.

From a bit of research it seems that Picture Motion Browser is incompatible with Roxio, which was already on the computer.

By going in to safe mode I have uninstalled Picture Motion Browser, but th... Read more

A:BSOD software incompatibility

Following article is from microsoft knowledge base describing this type of stop error...Could be a third party driver issue...http://support.microsoft.com/kb/330182

2 more replies
Answer Match 57.54%

Solved: After installing Intel RAID Rapid Storage drivers on both my computers, which have SATA hard drives and burners, then Nero 7, 8, 10 and 11 all ran flawlessly on Vista and Windows 7.

RAID Rapid Storage provides improved performanace and reliability for systems equipped with SATA discs for desktop, mobile and server platforms.

I had been running Nero 8 on Windows 7 Ultimate 64bit on my old PC without any problems. After building a new PC with Intel i7 960 CPU, Intel DX58SO2 Extreme mobo, Corsair SSD SATA 3 Hard Drive ... suddenly Nero 8 would not work.

I thought I had solved the problem by running it in compatibility mode WinXP (SP2), and also switching off Windows burning software. However this was a temporary respite, with intermittent success ... and a lot of destroyed blank data discs.

I next tried Nero 10 Burning ROM Trial version with the latest updates. And this was a disaster. Problems included inability to load the program, (eventually solved); inability to run properly with burn failures causing unuseable discs, and BSODs. After 15 or more email exchanges with Nero tech support, including log reports, etc, I finally gave up on it. Nero said it was the wrong media, but I had tried several different brands and +/- R and RW.

The irony of it was that on the same: PC, mobo, burners, (same driver versions in burners), media, 3rd party software ... etc, etc ... Nero 10 Burning ROM ran flawlessly on Win XP Pro. So the conflict lay in Windows 10 Ultimate.

I... Read more

A:Nero 10 incompatibility. Suggestions for equivalent software?

Here's a list of alternatives Nero Burning Rom Alternatives and Similar Software - AlternativeTo.net

9 more replies
Answer Match 40.74%

I can not find drivers for windows10my computer is HP G62-b54SE Notebook PCplz help

A:drivers&software

@Opada You will need to find the hardware ID for each one and search for the driver. http://www.wikihow.com/Find-Hardware-ID You can also post the ID here and we could help to find them. REO

1 more replies
Answer Match 40.74%

Hi,

I've got a HP 3330 printer/scanner/faxer
I have a cd with the 32 bit drivers for it along with the software
I just upgraded to a 64 bit OS.
I downloaded the 64 drivers from the hp website but the damn thing dont come with the software.
So i tried to use the cd to install the software but if it installs the software it HAS to install the drivers too! (32 bit, incompatable)

I just need the software to use the printer to scan something.
Is there a free software or something i can do to scan from the laserjet?
 

A:HP Drivers do not come with software.

You may be out of luck.
I believe the 32 bit software and drivers will work just fine.
 

3 more replies
Answer Match 40.74%

I am trying ot run game software and language software. It says No drivers. Where Could i get Drivers and DLLs?

Thanks

A:Software drivers

Hello teak and welcome to the forums

Could you please specify what programs you are trying to install? Does it mention any drivers in particular? Or give you an error code?

Tom

6 more replies
Answer Match 40.74%

is there any software app that can find all updates for drivers? without me having to search the net?

A:software for drivers

There's a few knocking about, but never actually used one, apart from a beta one uploaded here a while ago, which was registering Intel systems as AMD and vice versa, so have chose to stay well clear of them altogether.

9 more replies
Answer Match 40.74%

Hi everyone!! How can i get the updates for my Laptop with Windows 10?  And will it be available for my model. Thank you !

More replies
Answer Match 40.32%

Hi,
I am using a notebook which has windows 7 professional operating system on it. I use Windows XPMode to operate software applications that cannot run on a 64bit system. In general my system works fine in both Windows7 and XPMode, however, if I have to install
new software or drivers and if I get any updates for my computer it appears to cause problems whenever I next log on.
The computer boots up to the log on page, but my mouse and keyboard do not work, so I cannot access my log on profile or enter my password. Each time this happens I have to restore my computer to and earlier restore point just to access my device, but this
is not a good situation because I currently have to add new software for a particular application. I think that there is a conflict between the Windows7 and WindowsXP that might be causing this and am not sure how to go about resolving this issue. Any help
would be greatly appreciated.
Regards,
KFin.

More replies
Answer Match 40.32%

When I try to download drivers , I get the following error message We were unable to retrieve the list of drivers for your product.  Please select the desired operating system and select ?Update? to try again.

A:software and drivers update

@Sounakroni? Your drivers are here. http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7771404/model/8326104 REO

1 more replies
Answer Match 40.32%

hi
is there any software that update and remove old drivers for hardware like chipset ,videocard ,audio drivers ???
i dont want mess up my pc ,by removing or deleting something that doesnt need to be deleted .
free softwares welcome and to pay for one : its ok if its less than 30 bucks
thanx for any response , i searched in google ,but i couldnt find something good .
 

A:any software that update drivers ???

anyone heard of this kind of software ???i guess no one
 

2 more replies
Answer Match 40.32%

hi!

I want to update my drivers.Is there any software which can tell me which drivers need to be updated.Basically it should scan my hardware and tell me to update the drivers.

A:software to update my drivers!

You're better off going to the manufacturers websites, a lot of those programs aren't always accurate.

5 more replies
Answer Match 40.32%

I'm back on an HP laptop after having spent the last few years using a Dell Precision M4600 (which I miss already). I was hoping that HP would have improved their Driver and Software download site to provide more and better information to help users identify applicable drivers, but sadly it doesn't appear that much as changed. The website still leaves it to the user to determine which drivers and software apply to a particular computer. There are a number of cases where if you look at the revision history for a driver, for example, the Intel I217LM/V and I218LM Gigabit Ethernet Driver, there are versions of the driver available that are newer than the "recommended driver". Here is what's on the website: Version:1.00 S (13 Feb 2015)Version:12.12.80.19 A (8 Dec 2014)Enhancements- Provides improved support for Connected Standby.- Provided improved messaging when the system resumes from standby mode.- Provides improved ultra-low power (ULP) performance while the system is connected to or disconnected from an external audio cable.Version:12.12.50.7205 A (26 Aug 2014)Enhancements It's not obvious why the revision history would show newer versions of drivers if they are not applicable, but if they are applicable, why does the website not recommend the newest version, instead of the version from 26 August 2014? Both Intel and Nvidia have newer drivers available for the network adapters and display adapters, respectively. Does anyone get drivers for these... Read more

A:Drivers & Software Questions

To answer your question, yes you may absolutely download newer drivers direct from the manufacturer (Nvidia or Intel etc) website if you wish. The drivers that are on the HP website are the most recent ones that have been tested to work specifically with HP hardware, which is why sometimes you might see a difference in the versions.  I would definitely recommend running either HP Service Assistant or Softpaq download manager to help keep your drivers up to date. This will take a lot of the guess work out of whats needed and will save you time from having to keep checking the website for updates to drivers. You can even set the downloads to occur automatically if you wish! I hope that this helps to clear some things up and point you in the right direction. Please don't ever hesitate to give us a call if you need help with your Zbook at 866-625-1175. 

7 more replies
Answer Match 40.32%

I wanted to hear your opinions on what software you think is more reliable for updating the drivers. The reason I ask is because I am currently running two driver update programs but each of them are showing different updates for the hardwares. I read somewhere that drivers for 64 bit processors are difficult to find and those companies usually update the 32 bit.
 

A:Software for updating the drivers

Let`s stop using such a programs.Best drivers are from Manufacturer`s website.

13 more replies
Answer Match 40.32%

Hello all, just tried to re-install my printer/scanner and after re-booting my computer the new found hardware wizard could not locate the software.

I once had a CD that came with it but since lost it. I have no Ideal where to start. Any help would be arreciated Thankyou.
 

A:Software/Drivers for LexmarksZ82

http://downloads.lexmark.com/static/229-1-0-294.html
 

4 more replies
Answer Match 40.32%

I'm running Vista Business 32 bit. Do I need any other software installed to get games working properly? Additional codecs or Java or Quicktime? Or will the Business version runs games as good as Vista Home Premium?

More replies
Answer Match 40.32%

Is there a program out there that can help me uninstall/remove "drivers detective software". I am running Vista. I am running out of patience with this dang program. I hate it and cannot uninstall no matter what way I go - am hoping someone can help me.
 

A:drivers detective software

and welcome to the Forum

Try the Revo Unisntaller . . http://www.revouninstaller.com/revo_uninstaller_free_download.html
 

1 more replies
Answer Match 40.32%

I can't anylonger install my HP 6500 E709 series printer on my ASUS laptop. I have Windows 7 professional loaded and still gives me an error. Operating sytem on the computer not supported. Current OS. 601.00

support: Vista 64 bit, Vista, Windows XP

A:installing drivers and software

  
Quote: Originally Posted by johodun


I can't anylonger install my HP 6500 E709 series printer on my ASUS laptop. I have Windows 7 professional loaded and still gives me an error. Operating sytem on the computer not supported. Current OS. 601.00

support: Vista 64 bit, Vista, Windows XP



You can install the viswta driver in compatibility mode.

right click the installer>properties>compatibility>choose OS
Ken

3 more replies
Answer Match 40.32%

Hi!

So I just got a mp4 player from a friend, he also gave all the original stuff except for the box...
In the "Pocket Guide" it doesn't say anything about any web pages or bran or anything
useful and the original cd is so badly scratched that the cd drive don't even recognize it as
a cd and when i google i can only find some random forums but nothing useful and no
downloads...

So plz hlp me, I can't even get music to the player without software :/

on the back it says "zero3" and on the fron "M.series"

thx in advance!
 

A:Need drivers and software for mp4 player

Did you even try searching Google? Here is a link I found by putting in the search box "zero3 M series mp4" It nneded to be translated from Estonia to English. I'm not sure how far you can go with the link but its a start.

Link: http://translate.google.com/transla...&prev=/search?q=zero3+M+series+mp4&hl=en&sa=G
 

3 more replies
Answer Match 39.9%

Hi, I have a PC with the following specification:

Manufacturer: Hewlett-Packard Company (Model Compaq Presario)
Mainboard: Asus NODUS M (I think the model is A8M2N-LA)
Chipset: nVidia nForce 410
Processor: AMD Athlon 64 3500+ @ 2200 MHz
Physical Memory: 512 MB (1 x 512 DDR2-SDRAM )
Video Card: Nvidia Corp GeForce 6150 LE
Hard Disk: ST3802110A (80 GB)
DVD-Rom Drive: HL-DT-ST DVDRRW GCA-4164B
Monitor Type: LG Electronics L1718S - 17 inches
Operating System: Microsoft Windows XP Home Edition 5.01.2600 Service Pack 2
DirectX: Version 9.0c

I have just bought an AMD Athlon 64 X2 2.3GHz Dual-Core CPU, however when I fitted it to the motherboard, it gives continuous long beeps with about 4-5 seconds in between them and the computer doesn't boot up.

I have got no idea what could be causing this so any help would be appreciated.

Thanks.
Gareth.
 

A:CPU incompatibility

Have you already looked up your motherboards' manual? Normally the beep codes are explained there Also check out the compatibility list of the Asus Board to be sure the cpu works fine with your board.
 

2 more replies
Answer Match 39.9%

Can anyone pint me in the direction for the Canon software for a Canon Pixma IP5200. I want to be able to once again print onto DVDs but cannot. I have aprint driver installed that works, but the Easy print toolbox and CD label print software from Canon won't install
Thanks

A:Canon Pixma software and drivers

I used Vista Canon drivers for mine... Running them in Vista Sp1 compatibility mode and installed as administrator... Worked for me.

3 more replies
Answer Match 39.9%

Back in the XP days I used to integrate all the drivers and other machine specific software onto the CD I used for installation however things have changed a lot since then so I was wondering how to do the same things with a Windows 10 USB drive?

If it makes any difference here is a list of that needs drivers/software post-install

Intel Rapid Storage
Samsung Magician
Intel Management Engine
Card Reader (RICOH)
Audio drivers/software (Conexant)

The card reader and management engine are just a bunch of drivers and some inf files for install but things like the Rapid Storage and Samsung Magician will need automatic calling with command line switches for a silent install.

It isn't a huge deal to me but this is a test system (ThinkPad T420s) that I wipe every couple of weeks to play around and it would save me 10 minutes or so each time if it can be done.

A:How to integrate drivers/software to a Windows 10 USB?

You would have to roll your own custom install.

3 more replies
Answer Match 39.9%

I have a OneTouch meter and when I upgraded from Windows 7 to Windows 8 I waited a long time for a new cable, usb to serial comm, along with the drivers. I installed everything and it worked fine. Now I upgraded to Windows 8.1 and when I plug in this cable the device manager reports this device cannot start code 10. A device which does not exist was specified.

The question I have, is this a Windows 8.1 problem or a problem with the driver? I would think that a driver written for Windows 8 should work with 8.1?

Al

More replies
Answer Match 39.9%

Is there software that can run and download all the drivers currently being used on your laptop/pc so you can store them on usb etc.

This possible?
 

A:Software to download all your drivers from current PC

have a look at driver max
only use the export function - to save your current drivers - dont use the update driver section
http://www.drivermax.com/
it is free
http://download.cnet.com/DriverMax/3000-18513_4-10572602.html

see here
http://forums.techguy.org/all-other-software/1012171-drivermax-downloaded-drivers-stored-pc.html
 

2 more replies
Answer Match 39.9%

I'm soon going to be assembling a new rig, with an AMD Phenom II x6 1090T CPU, verses the Athlon II x2 4400+ that I now have. Obviously, the chipset driver is different and will have to be upgraded also, but is there anything more that isn't automatically installed by the OS installation or Windows Updates?

A:Required Software/Drivers Upgrade?

Win7 installer is mostly driver-complete with newer arriving quickly via optional Windows Updates when you enable hardware auto-updating: Automatically get recommended drivers and updates for your hardware

Afterwards any drivers missing in Device Manager can be imported from the Support Downloads webpage for your model device.

I would not change out any drivers issued by the installer and updated by optional Updates unless performance problems point to that driver.

9 more replies
Answer Match 39.9%

This is the list I found:http://support.hp.com/us-en/drivers/selfservice/hp-envy-15-k000-notebook-pc/6936206/model/7146286#Z7... Some of those drivers have not been listed by HP Support Assistant, so it'd be great if you could tell me what I simply HAVE TO install. Also, are there any that I better avoid installing because they're known to be buggy on my Envy model? Any at all? Thanks  #### Windows 10 Home 64-bitIntel Core i7-4510U @2.00GhzBIOS: F.34228D 77.35NVIDIA Geforce GTX 850M (10.18.13.5362)

More replies
Answer Match 39.9%

I need replacement software and drivers for and IBM 30 bit flatbed color scanner. IBM 0275-001 part number 01K1226. My computer crashed and I misplaced all my folder with all the scanner information and drives software and scanner software. I need to reload everything on my reformatted hard drive. Any hints on how to get my scanner up and running again would be appreciated.

------------------
George
 

A:IBM flatbed scanner software & drivers

http://www.pc.ibm.com/qtechinfo/YAST-3PB2XM.html?lang=en_US&page=brand&brand=IBM+Options%7CScanners%7CColor+Flatbed%7C0275001&family=IBM+Options%7CScanners&machineType=IBM+Opt ions%7CScanners%7CColor+Flatbed&model=IBM+Options%7CScanners%7CColor+Flatbed%7C0275001&doctype=Downloadable+files&subtype=All

--edit -- trying to fix link

[This message has been edited by LarryCore (edited 01-30-2001).]

--edit - I give up! Copy and paste, like he said. It works that way.
[This message has been edited by LarryCore (edited 01-30-2001).]
 

3 more replies
Answer Match 39.9%

So I am going to be reformatting my PC. It's an Asus computer that I bought used from Craigslist and it didn't come with a driver backup CD. Also it doesn't have a recovery partition on it either. So I am wondering if there is any free software that will allow me to backup, and then restore all my drivers after I have reformatted the computer. I searched some of the other threads and a few people suggested Driver Max. Driver Max used to be great, it used to be the best program because it was free and fully functional. But now it's complete garbage unless you actually buy the software, which I cannot do. So are there any other methods/programs any of you know of that can backup drivers?

A:Any software to backup and restore all my drivers?

Windows 7 has a Backup and Restore feature built right in.

Backup and Restore - Windows 7 features - Microsoft Windows

2 more replies
Answer Match 39.9%

please show me to make a set of drivers software discs as a backup in case computer needs to be reformated. thanks

A:how to make a set of drivers software discs

Hi -

Please provide system information - the manufacturer and model number of your system. Look on the bottom of laptop for exact model number, please.

Regards. . .

jcgriff2

`

3 more replies
Answer Match 39.9%

My daughter has a HP Envy 15-u011dx x360 64 bit system 8 was on it when she bought it I believe (about 2 years old) and it came with the beats audio software. She had to do a clean install of Windoes 10 but when she went to the HP support site it came up and said there were no drivers or software available for her machine. How is she supposed ot reinstall beats, her toouch pad software and any other software that came with her machine originally came with?  Are these drivers and software available somewhere and if so why, unlike most hardware manufacturers, are they not available on the HP site to HP owner?   

A:Beats Audio software and drivers

Hi: The HP consumer PC support site crashed sometime last night or very early this morning. All the drivers and some other info such as specs, manuals, etc are gone from every model's support page. HP is aware of the problem, and is working to resolve it. Since I do not work for or represent HP, I can't tell you when they will have it working again, But once it comes back up, your daugher will be able to install the drivers she needs for her notebook.

1 more replies
Answer Match 39.9%

Any driver backup software that I can use for free on XP? I got my Computer downgraded from Vista (computer was shipped with it installed) to XP by a person and he had installed all the drivers already.

I'm trying to find a software that can automatically back up drivers on this computer just in case I have to do a clean install of XP.

And please no trial or any other of those "crapware" products.

Thanks

A:[SOLVED] Any backing up drivers software for XP?

you can give drivermax a try

http://download.cnet.com/DriverMax/3...html?tag=mncol

personally I just backup my windows/system32/drivers folder.

5 more replies
Answer Match 39.9%

When my computer starts up, it right away has the phrase "CD Recording software" cannot load. I've removed the software and this keeps coming up. What do I do?
 

A:CD Recording Software not able to load drivers

9 more replies
Answer Match 39.9%

HI. Three years ago i bought this PC with an OEM key for windows 8.1. Yesterday i did a clean re-install of windows and now i want to download the HP software and drivers. I downloaded it from this site finding my device but some of the softwares give me the error: "can't install, the pc hasn't the requisites". These softwares are cyberlink, intel graphics driver and hitachi driver. Before reinstalling windows these softwares were installed. How can i do? Thank you for the answers.

A:Can't install Hp software and drivers: the pc hasn't the req...

#HPExpertDayTry installing HP Support Assistant which will automatically download and install drivers/updates:HPSA Link: http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html

2 more replies
Answer Match 39.9%

Just want to check with you ppl whether is there any softwares that can help to detect and check whether our pc has the latest drivers installed...

thanks ppl!

A:Software that detect the latest drivers

Hey undergrd,

HP, MSI and NVidia are the only manufactures offering software capable of checking for the latest drivers that I know, do you use any of there hardware?

dmex

8 more replies
Answer Match 39.9%

 Dear Technical Team, May I kindly request for a software drivers for my HP notebook laptop 14-af002au model, running for windows 7 32 bit.   Thank You and Looking forward for your favorable reply.

A:Software Drivers for HP notebook 14-af002au

Hi: All of the W7 64 bit drivers and software from your notebook's support page should also contain the 32 bit drivers, except for the audio and graphics.  For the smbus and usb controllers, you need to install the amd chipset drivers and restart the PC. You want the first file listed on the webpage. http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2032 Graphics:  You want the 1st file listed on the webpage.  Install and restart the PC. http://support.amd.com/en-us/download/apu?os=Windows%207%20-%2032 Audio:  Accept the agreement.  Download and install the 1st driver on the list and restart the PC. http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT... Definition Audio Codecs

1 more replies
Answer Match 39.9%

I believe that there are many programmes that will check drivers free, and that one can then manually, one by one, find and replace out of date drivers by new ones.
However, I am wondering if there is any free software that will find the required drivers and then install them
If not, I would appreciate knowing about the experience of readers with any ofthe software that will do it for a fee.
 

A:software to check/install drivers

If you are NOT having any issues with any hardware, I would NOT go looking for updates to all of your device drivers.

"If it ain't broke, don't fix it"
 

2 more replies
Answer Match 39.9%

I have not had a single BSOD on my system running Windows XP Home since 2008...literally.
 
Today, I uninstalled some software.  I uninstalled a PC web camera driver and software and also uninstalled some VIA motherboard update software.  I haven't used this software some time and it is not even set to auto-run when Windows starts up.
 
I also ran the registry cleaner in Piriform's CCleaner before restarting.
 
Upon restarting, I was greeted with a BSOD Stop error 0x0000007B (0xF789E528, 0xC0000034, 0x00000000, 0x00000000)
 
No other information.
 
Using the recovery console, I have attempted chkdsk /r and fixboot.  No fix.  (I have not tried fixmbr)
 
I also attempted to use system restore through the recovery console.  I only have one recent restore date to try, which was made when I uninstalled the VIA update software.  I followed the steps provided here () and they did not help me.  I still get the BSOD when restarting.  Last known good figuration and safe mode also result in the same BSOD.
 
Specs:
 
Asus K8VSE Deluxe Motherboard
AMD 3400+ Processor
Seagate 320mb SATA harddrive
ATI X800 Pro Video
Creative Audigy 2 ZS Audio
 
She's an older system but that really isn't to blame....there is no hardware issue here...it must be a result of the programs and drivers I uninstalled via add/remove programs, or the registry cleaning process.  I have used the registry cleaning process... Read more

A:XP BSOD After Uninstalling Software + Drivers

1) Registry Cleaners CAUSE problems, they do not cure them. I suggest you run the UNDO function in the registry cleaner and then never use it again.
 
2) What VIA mother board software did you uninstall? Look in Device Manager. Are there any yellow or red symbols?
 
3) Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

73 more replies
Answer Match 39.9%

I am trying to update drivers for NVIDIA software. NVIDIA website is NO help at all.

#1 - While trying to update my
"NVIDIA nForce 590/570/550 Serial ATA Controller"
I got an Error Message: "C:NVIDIA\nForceWin2k\15.23\IS\Thumbs.db - Access denied"

AND Error Message: "NVIDIA Setup Error - Previous NVIDIA Windows
software have been detected. To ensure proper installation of the new
drivers, it is necessary to uninstall the current drivers."
#2 - While trying to update my "NVIDIA Network Bus Enumerator"
I got an Error Message: " Access denied"

AND Error Message: "NVIDIA Setup Error - Previous NVIDIA Windows software have been detected. To ensure proper installation of the new drivers, it is necessary to uninstall the current drivers."
I Currently have in my system the following NVIDIA programs:

under “C:\NVIDIA”-
“nForceWin 2k”
“nForceWin 2KXP”
“nForceWin XP”
“Win 2k”

Under Program Files:
“NetworkAccessManager”
“9.16_nforce_winxp_international_whql.exe”
“175.16_geforce_winxp_32bit_englich_whql.exe”
“nforce_winxp32_15.17_international.exe”
“nforce_winxp32_15.17_international.exe.xml”

What am I supposed to UNinstall?????????
 

A:update drivers for NVIDIA software

Hi there,

Go to Add/Remove Programs, and remove anything nVidia. Then go to C:\ and right click on the NVIDIA folder. Tick the box next to read-only and click Apply. Then untick the box and click OK. This will reset the folder permissions. Now restart and try again to update the drivers. Also, make sure you are not using a "Limited Account".

Hope this helps.
 

1 more replies
Answer Match 39.9%

Hi!

I remember when I first lost my Motorolas original CD, I couldn't find the software anywhere to be downloaded and no one that i knew had a motorola rzr mobile phone...

I found my old cd here a few days ago so I made an .iso file of it and uploaded it (as 13 .rar files, the file max size is 50Mb).

Here it is

Tel me if the link doesn't work or something.

http://cid-e198cc24bf261f09.office.live.com/browse.aspx/Motorola Razr?permissionsChanged=1&1
 

A:Motorola Razr v3 drivers and software

Yep that works for me.
 

10 more replies
Answer Match 39.9%

i just reinstalled xp and everything got formated,so i have no sound card,softwares,lan,e.t.c all the softwares and some hp softwares/drivers i downloaded wont install they each give me closely related error (i think its my drive D that has problem)

some of the errors i get when trying to install softwares and drivers are related to the images



please i need help seriously, i cant install anything or hear anything all i can do is view images transfered from my phone, wireless isn't installing because of this.. meaning no browsing, i'm browsing with my moms laptop
 

A:software/drivers installation arror

15 more replies
Answer Match 39.9%

HI. Three years ago i bought this PC with an OEM key for windows 8.1. Yesterday i did a clean re-install of windows and now i want to download the HP software and drivers. I downloaded it from this site finding my device but some of the softwares give me the error: "can't install, the pc hasn't the requisites". These softwares are cyberlink, intel graphics driver and hitachi driver. Before reinstalling windows these softwares were installed. How can i do? Thank you for the answers.

A:Can't Hp software and drivers: the pc hasn't the requisites

#HPExpertDayTry installing HP Support Assistant which will automatically download and install drivers/updates:HPSA Link: http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html

1 more replies
Answer Match 39.9%

Hey guys, I have multiple PCs here with me, some are straight Dell standard computers, other are custom build. I was wondering if you guys happen to know a software that can update all there drivers instead of me wasting alot of time looking for them? Thank you for your time?

A:Are there any software that can update all the drivers in my computer?

Well ........ theres multiple programs to do this but I hesitate to recommend one. I personally think its better to download them yourself when needed. If you use Avast A/V theres a software updater included but mines turned off.

A quick Google search will show you many many pieces of software that fit your needs, be sure to investigate anything before you install!

3 more replies
Answer Match 39.9%

I recently refurbished an old HP MediaCenter m7350 computer by reformatting the hard drive and installing more memory and Windows 7 Pro.  Everything seems to work except the sound.  Unfortunately, I did not get the original software recovery disks and this product is no longer supported by HP. How can I get a copy of the original drivers, especially for the sound card?

A:Need original software (especially audio drivers) for HP Med...

Hi: Below is the link to the specs for your PC. http://support.hp.com/us-en/document/c00585745 According to the specs, you would need this audio driver. Accept the agreement.  Download and install the 1st driver on the list and restart the PC. http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT... Definition Audio Codecs

1 more replies
Answer Match 39.9%

If you Know any Software Please Give me a link to download Them
I Will be very Grateful if you can find Advanced Driver Update from this site Advanced Driver Updater - Keep device drivers up-to-date
HACKED because the free version don't let me download the drivers

A:Any software to download my PC lastet drivers

Why use a driver update program rather than going to the hardware manufacturer's web site?

Do you always update drivers even if current drivers are working OK?

3 more replies
Answer Match 39.9%

Hi, i just bought Yoga 3 pro and i'm going to install new win 10 x64. I need to decide what drivers and lenovo software to install from original Lenovo site:http://support.lenovo.com/products/laptops-and-netbooks/yoga-series/yoga-3-pro-1370-laptop-lenovohere is 25 items to install, some of them i doubt they are essential or usefull. I need just maximum speed and battery life, dont want some special features, just basic w10 system.I would like to ask experienced Yoga 3 pro users for advice. what to install and what to avoid. thank you.

More replies
Answer Match 39.9%

I have just installed Driver Agent Plus and it shows 13 out of date drivers. Should I rely on Windows 10 to update necessary drivers or should I use a 3rd party program? If the latter is Driver Agent Plus a good choice.?
My set-up is as I want it and I am a bit concerned new drivers will cause problems. I know for example that my old printer does not work properly with latest driver but is fine with older version.

A:Update Drivers using 3rd party software?

I do not recommend these updater services. If you're happy with the performance of your PC as it is, I would leave it.

I prefer to periodically go to the manufacturer's website manually to check for updates, then you're sure you're getting the right driver.

2 more replies
Answer Match 39.9%

Hello all,

I am looking for a program that will automatically update my drivers and software for me like itunes etc. Thanks.

A:automatically update drivers and software

Here's the link to the program I use. Free Driver Update, Driver Download Software - Device Doctor

4 more replies
Answer Match 39.48%

I have a new computer with windows 7 home premium, 64 bit. I have an existing HP Officejet 6210. It's supposed to be plug and play, but the operating system is recognizing the printer as an unidentified device, hence I'm unable to print. I've tried installing the drivers for Vista 64 but I can't get the installation to work. A big X comes up when trying to connect with the printer.

Could the two just be incompatible? (HP and Microsoft says they're compatible but nothing HP is suggesting I do is working)
 

A:printer incompatibility

10 more replies
Answer Match 39.48%

I’m running a Home office, I have 4 pc two of which im running win98 OS and other two latest one is Win 2003 server and another one Win vista. When I try to make a Network connection its showing error. I just want to know should I upgrade my two pc to win xp or win2003 the error is incompatibility. Is that the only solution for this, any suggestions! Plz help.
Thanks in advance
 

A:Error is incompatibility...

You need to provide some information about how your network is set up. Is it wired, wireless? What kind of equipment are you using ... router, switch? Maybe you should post some IP configuation for some of the nics.
start-run-cmd then ipconfig/all.
copy and post the result in hear
 

3 more replies
Answer Match 39.48%

Hello, my setup:

Vista32

HP dvd1040i 20X Multiformat DVD Writer - Disk drive - DVD?RW (?R DL) / DVD-RAM - 20x/20x/12x - IDE - internal - 5.25" - black - LightScribe

NZXT Hush Series 11-Bay Black ATX Mid Tower Computer Case

DiabloTek PHD650 650-Watt Power Supply - ATX, SATA Ready, PCIe Ready, 20+4 Pin

Intel Core 2 Extreme QX9770 Quad-Core Processor, 3.2 GHz, 12M L2 Cache, 1600MHz FSB, LGA775

Corsair XMS3 DHX - Memory - 4 GB ( 2 x 2 GB ) - DIMM 240-pin - DDR3 - 1600 MHz / PC3-12800 - CL7 - unbuffered

Asus P5E3 Deluxe WIFI AP N CH1-11 C2D LGA775 Intel X38 ICH9R FSB 1600 5 Motherboard

XFX GeForce 9800 GTX + 512MB PCIe w/Dual Link DVI

Noctua NH-U12P High Performance Cooler.

1920 x 1200 lenovo hd monitor.
Since building this comp I have had consistent random lockups and have tried every concievable thing to remedy this. Flashed the bios with latest version, updated all the MB drivers, still nogo.
Tried another psu and video card, even tried swaping ram sticks and one at a time in different slots. The comp booted fine but the lockups remained.
Due to the erroneous vendor info supplied online to make a sale, I was unfortunately caught as I only after much trouble trying to resolve the lockup problem, found that my MB couldnt handle more than 1333Mhz ddr3 ram.
My question is this. Could the lockups be caused by trying to run 1600Mhz ddr3 ram on this board?
Thanks in advance

zman
 

A:Hardware incompatibility?

10 more replies
Answer Match 39.48%

Our file server is Windows 7. My workstation computer is still XP. Since 7 was installed on the file server, I am continually getting kicked off. Is there an easy way to get my computer back on the file server without having to get everyone else off so I can do a restart? I'm at wits end and it's not a pretty place.
 

A:Solved: XP & 7 incompatibility?

16 more replies
Answer Match 39.48%

Why is there such a plethora of incompatibility errors in linux? i thought linux worked with everything? So far it doesn't work on my AMD Athlon XP 1900+, my old PIII 450mhz, and now i tried it on a Compaq Presario 5034ES and yet again there is an error message. This time it says 'Kernel Panic: No init found. Try passing init= option to kernel.' I have only one more computer to try it on, and if it fails, then i will not be able to run linux. It is a Compaq Presario 7470.
 

A:Linux Incompatibility

That leads to the Dark Side...

That's the difference between a commercially produced operating system like Windows and something that, essentially, you are getting for nothing. There is little encouragement currently for hardware vendors to develope drivers for Linux, because they know that Windows rules the desktop currently.

A lot of the work done to make your hardware work in Linux is often done by hardware manufacturers on a "lets be kind" basis, or drivers are written by Linux enthusiasts who want to make their own hardware work with Linux and then share what they have created.

But this MAY change in the future.

How on Earth you got the idea that "Linux works with everthing" I have no idea.

Another point is that, just because you haven't been able to get something to work, doesn't mean that it can't. You are more than likely doing something wrong, partially due to deficiencies in yours and our own knowledge, and also because doing some things in Linux is a lot harder than in Windows.

My best advice is to pick well known, "uncontrovertial" hardware to run your Linux on, and to keep up to date on the net with updates in the Linux hardware support world. Things are changing but remember that Linux doesn't have the multi-billion dollar corporate machine behind it that Windows does.
 

1 more replies
Answer Match 39.48%

I have been using Ccleaner for years & for 6 months on this PC & it will not let me install the latest version, 504. It is saying it is incompatible. Anyone any ideas.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-3340 CPU @ 3.10GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 12230 Mb
Graphics Card: NVIDIA GeForce GT 730, -2048 Mb
Hard Drives: C: Total - 114243 MB, Free - 52491 MB; E: Total - 1907727 MB, Free - 802132 MB;
Motherboard: ASRock, B75M-DGS R2.0
Antivirus: AVG Internet Security 2015, Updated and Enabled
 

A:Ccleaner incompatibility

According to the Piriform CCleaner site, version 5.04 works with 32-bit and 64-bit versions of Windows XP, Vista, 7, 8, and 8.1.

---------------------------------------------------------
 

3 more replies
Answer Match 39.48%

I am having a compatibility problem between a toolbar and windows explorer. and yes I know the easiest thing would be to disable the toolbar, but it is a rather important one to me. Also it is a new development since I have had this toolbar for almost a year now with no problems.

The toolbar is the Freecorder one. It records mp3s or wavs from streaming audio. As I said no problems for a year. Now when I try to record this is the sequence:

A DEP (Data Executable Program) window opens saying it has closed windows explorer. My desktop goes blank, taskbar disappears.
When I close that message box another opens, asking to send error report to Microsquish, if I hit the debug button instead, the recording window appears and the desktop and taskbar reappear and I am able to record.

If any other programs are open, they also are closed, (DEP), individually. The only programs that remain open are the IE and if I have Windows Media player open.

I did have some Yahoo widgets on my desktop that also were incompatible. So I have disabled them but I am curious how this developed and if I can fix it.

I will provide any info I can.
 

A:New Incompatibility Problem - Oy!

7 more replies
Answer Match 39.48%

So my friend just gave me a Q6600 2.0 Core2Quad to use. Upgrading from an E4400 2.0 Core2Duo.

The processor should be fine, as he was using it less than a month ago.

Current system specs:

4GB DDR3 1333
Gigabyte GA-G41M Combo MB
geForce 250 GT
Windows 7 Premium 64Bit
Thermaltake 600W Power Supply

When I install the new CPU, system boots, goes to Windows, then fails after a few minutes as if the CPU were too hot. I reapplied thermal paste, ensuring a thin, even coat across the back of the CPU as well as the Heatsink.

EDIT: Oh also, when I was able to get the system to boot to Windows, I ran speedfan to try to get readings there and it was showing all cores at roughly -20C which I know isn't really possible... Current readings on C2D are at 50c each core.

The old CPU still works fine, so I am unsure of what may be causing the issue. Came here because I have received great help with other issues in the past.

Let me know if there is anything else that you need from me as far as information.
Thanks for reading!
 

A:Solved: Possible CPU Incompatibility?

12 more replies
Answer Match 39.48%

Thanks to anyone who provides help on this frustrating issue. Sorry for the long post!

So, I'm not the most tech-saavy, but I can usually figure things out with a combination of determination and Google, but this time I'm stumped.

Here's the scenario. Out of desperation, I replaced my CPU fan a couple of months ago, essentially putting a band aid on an issue that I'd have to address later - namely that I'd need a better cooling option. Recently I purchased a nice fan from Microcenter:

Zalman CNPS7500-CU LED with FanMate 2 vairable speed fan controller in addition to some Coolermaster Thermal Compound

I installed the fan, which was difficult, and when I turned the fan on I got a BIOS/Motherboard warning (one short beep, one long). The system stayed on but would not boot up and the fan would continue spinning at a low speed. The fan was also unresponsive to the FanMate dial, whether I tried to speed it up or down; the fan also ran on its own when I plugged its 3-pin directly into the motherboard but with the same warning beeps. The thermal paste was well adhered, I didn't crush my processor because I'm typing from this computer now (using old fan).

What I've found (from the Compaq website) is that the beeps indicate that my motherboard does not recognize that my fan is spinning, likely because its set up for the FanMate, although removing the fanmate option doesn't take care of the issue.

In BIOS, there is no option to disab... Read more

A:CPU incompatibility problem!

7 more replies
Answer Match 39.48%

So one of the applications I frequently use stopped working and said it's because it no longer supports the version of Internet Explorer that I have(IE 7). So I go to update to IE 9 and when I do IE says that IE 9 is not compatible with my OS (Vista Home Basic 32 bit). And so I'm at an in-pass. Every time I try to look for what I need to update to IE 9 It just takes my back to the screen where you download IE 9. What exactly do I have to do?

A:Incompatibility Chain

it should be compatabile with vista home basic sp2, what service pack is your machine?

5 more replies
Answer Match 39.48%

I have a Dell PC with a fresh install of Windows 7 Home Premium (Svc Pk 1), Intel Celeron 2.20 GHz, and 64 Bit OS. The current RAM card is hynix 2GB 2Rx8 PC3 - 10600U. I want to replace the ram card. I bought from newegg a crucial 4GB DDR3 1Rx8 PC3 - 12800U. When I replace the cards the computer just beeps at me and won't start. What am I doing wrong? I'm assuming the crucial card is incompatible. What card do I need to get that would be compatible?
 

A:Solved: RAM incompatibility

go here ............ and d/l the scanner, scan system............ then purchase http://www.crucial.com/usa/en/systemscanner
 

2 more replies
Answer Match 39.48%

Hello,

I recently purchased the computer monitor MAG AI937W. It is an LCD 19'' Widescreen.
The recommended resolution is 1440 x 900. The problem is that in Display Properties - Settings, that resolution is not available. My adapter is S3 Graphics ProSavageDDR.
Using other resolutions makes the image stretched width, so that a circle becomes an ellipse.

I understand that I can solve the problem by changing the adapter. But my question is, is there any way I can solve the problem without buying anything?

Thanks a lot for your help.
 

A:Widescreen incompatibility

9 more replies
Answer Match 39.48%

Hey, I work for a company and am installing the Itunes (for Win XP) on users computers, and it installs perfectly and recognizes Audio CD's perfectly (using the Admin account ofcourse). However, when I get the user to log back in to his/her account, they open Itunes just fine, but the Audio CD won't recognize. We tried changing the file type to where all Audio CD's would open automatically using Itunes to no avail. This problem is becoming irritating, and am wondering how I would go about setting up Itunes so that it will recognize the Audio CD's.

Check the image, this is what the error gives when you try to update the file types.

Also, this is what show's up when I run a CD Diagnostic test from the Itunes help menu:

Microsoft Windows XP Professional Service Pack 2 (Build 2600)
iTunes 4.8.0.32
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.1
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON X300 Series

IDE\DiskST3160023AS_____________________________8.05____
Could not open CD handler, 5. Problem with installation of drive in Windows.
IDE\CdRomSAMSUNG_CD-ROM_SC-148A__________________B403____
Could not open CD handler, 5. Problem with installation of drive in Windows.
IDE\CdRomTEAC_DVD+RW_DV-W58E_____________________D.0C____
Could not open CD handler, 5. Problem with installation of drive in Windows.

D: SAMSUNG CD-ROM SC-148A, Rev B403
Failed trying to read table of content... Read more

A:Itunes incompatibility

7 more replies
Answer Match 39.48%

today, I downloaded the windows 7 upgrade advisor, and the thing that it said was that my NVIDIA nForce System Management Controller was incompatible and that it needed to be upgraded. I checked for upgrades, and mine was current. I did some googling, and no luck. does anybody know if my computer will still work properly, even if this driver is incompatible with windows 7? and does anybody know of any upgrades? I really want windows 7!

A:Driver incompatibility

  
Quote: Originally Posted by Wii Master 64


today, I downloaded the windows 7 upgrade advisor, and the thing that it said was that my NVIDIA nForce System Management Controller was incompatible and that it needed to be upgraded. I checked for upgrades, and mine was current. I did some googling, and no luck. does anybody know if my computer will still work properly, even if this driver is incompatible with windows 7? and does anybody know of any upgrades? I really want windows 7!


Is it working in vista?
If so you can make it work in win 7, usually

Hope this helps

Ken

9 more replies
Answer Match 39.48%

playsforsure MY ***!! ive got a rio nitrus (on the media player "playsforsure" list) that works fine on my laptop, (A samsung P30) but seems to have problems with my PC. its all installed and works with Rio Music manager but Musicmatch Jukebox and Media Player dont recognise it at all. ive got all the latest updates for both and still nothing.
ive got a 2.8 P4 with 512 RAM on a ASUS P4S800 MoBo, running XP pro SP2. I need media player so i can resample my music to fit. any ideas as to why this might be happening.
 

More replies
Answer Match 39.48%

Hello everyone,

I have two types of events in my sys log which cause me concern :

Event 7000, Service Control Manager
The Aspi32 service failed to start due to the following error:
This driver has been blocked from loading

Event 1060, Application Popup
\SystemRoot\SysWow64\drivers\aspi32.sys has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.

Not knowing exactly what i'm doing i downloaded a ASPI checker which i screenshoted and attached to this thread for you to see.

Any idea on how to fix this would make me very happy

A:aspi32.sys incompatibility

MS info (response)
ASPI is not supported by Microsoft for all versions of Windows
To remove this error, you need to locate the program that tried to install the ASPI drivers (namely 32bit - not working with your 64 Bit)
Or, you could do a System Restore, back to when all was OK
Updating the ASPI drivers is the last option

3 more replies
Answer Match 39.48%

We are requireing to install a LTE modem module into several HP Probook 650 G2 (V3F37PA) notebooks.  The problem we are facing is LTE is a must, the LT4120 Modem will not run / connect to the mobile broadband netowrk with the required configuration to allow access to a corporate network and the LT4112 Gobi Module we know works with the required configuration is "incompatible" with this model laptop and is disabled by BIOS on start up. Is there are way to force the BIOS or a new BIOS available to allow the use of the LT4112 Gobi LTE Modem module in this model notebook.

More replies
Answer Match 39.48%

complete story,
i had brought a 40gb seagate drive(earlier i had a samsung 4.3 GBHDD) few months back but it was when i installed the drive that i came to know my bios didn't support it.
cpu: PII 333Mhz
mobo manufaturercpartner
MODEL:VIB862D
CHIPSET:VIA APOLLO pro
CHIPSET PART NUMBER:
SOUTH BRIDGE:VT82C586B
NORTH BRIDGE:VT82C691
PLATFORM:SLOT 1 BABY AT
FLASH IC SIZE: 1 Mbit
reply from my mobo manufaturer was "the mobo with 1Mb flash BIOS can only recognise drives upto 32 Gb."
since i didn't have much money that time i used the seagate Dynamic Drive Overlay S/W to somehow make the HDD work but it caused me lot of reliability problems.

i just want to make the 40GB HDD work perfectly .
i know my sys is obsolete but apart from the bios problem i have no othe problems with my sys.

which of these update options u think will ******cost me less*** but will still address my problem?

1.buying the promise ultra 100 card(non raid version) (manufacturer claims that onboard bios can overcome any bios limitation and boost the transfer speed of HDD.)
2.buy a new P2 slot 1 motherboard (are they available ?) with bios support for larger HDD.
(if any brands are available can u just name a few good ones)
any better options ??? please suggest me..
 

A:bios and HDD incompatibility!!!

Promise card should work, less expensive than a new motherboard.
 

1 more replies
Answer Match 39.48%

Hi-
I use Photoshop CS5.5 at work and created this 1920x1080 document with about 15 Layer-comps and ~350 layers in it.
I went home and opened the file on CS4 and the message I got was:
"could not complete your request because the resulting document would be too big"
I even ruined the backup I had cause I tried to open it as well not knowing what causing the problem.
Did anyone saw that before and managed to recover the file?
Thanks, Ido

A:Photoshop CS4 incompatibility

Firstly, Welcome to the Forums!
The problem is that CS5.5 is not compatibility with CS4 since it is a earlier version. It will only be compatible with CS5.5 and 6. Sorry.

2 more replies
Answer Match 39.48%

My kid plugged in her friend's ipod sans software. The comp. crashed and it says I need to uninstall a driver. How do I find the specific driver to uninstall? The computer said it will have an explanation point, but I have not seen anything with an explanation point. I have already tried System Restore and it did not work. I keep getting the dreaded blue screen.

A:Ipod Incompatibility?

You can try to re-load the software for the Ipod and also the blue screen there is a message on it for error and if you could please post that error message it would be helpful.

1 more replies
Answer Match 39.48%

I have been unable to print from my Studio 17 laptop since buying it two weeks ago. I tried installing the original disks to two HP all in one printers .... one 2570 and the other HP 2700. Neither are accepted or recognized by Windows 7. Of course Dell refuses to help me resolve this issue unless I pay them $49.95 which was a "special rate" just for me. My frustration is that I have several software programs that were on my old laptop that are probably incompatible with 7 and as I begin to use my computer more I will be paying Dell each time a program is incompatible. They say the problem is an HP problem not Dell. Well both my printers are out of warranty. They work fine and I refuse to go out and buy a Dell printer just so it works with Windows 7. I have the feeling that I made a big mistake purchasing the 7 until some of the problems got worked out.
Can anyone offer me some guidance please?? You should probably know that I am borderline literate when it comes to computers. Thanks in advance.
meajha

A:HP Photosmart2570 incompatibility

Hello meajha, welcome to the Seven Forums.

Try this:
Disconnect the printer / printers
Uninstall all printer software and HP drivers you have installed
Click , type devices to the search field and press enter to open Devices and Printers
Click Add a printer

Click Add a local printer

Choose Use an existing port and choose LPT1: (Printer Port) from the drop down list. Click Next

Click Windows Update button. Please notice it takes a long time, several minutes, to load the printer list. Just wait

Choose HP from Manufacturer list and HP Photosmart 2570 series from Printers list

Click Next, follow the instructions given. Only connect your printer when asked to do so.
Your printer should work now.

Repeat this procedure to add your Photosmart 2700. Even if you are using your printer as a network printer, connected directly to your router, you should first install it as a local printer. After installation you can then disconnect the printer from computer, connect it to router using LAN cable and follow this procedure to step 5 where you can choose Add a network printer.

Kari

3 more replies
Answer Match 39.48%

HI, I get this warning everytime I log on, its says"driver of this software may damage windows,windows has shut it down" How do I uninsatall this driver,so this message does not appear any more?The software(HP CD-now for OS XP) was a upgrade for my cd burner ,but it did not work, I was getting a USB connection failure , I only have two USB ports on my board. Thank you From Pete this forum looks great
 

A:warning message from XP about Cd drivers from roxio software

8 more replies
Answer Match 39.48%

I had been having blue screen problems with my old Dell XP. The programs WhoCrashed and BlueScreenView implicated a few drivers of non-essential software as the culprits. I examined the drivers module in AutoRuns (by Sysinternals) and carefully selected non-essential software drivers for disabling of their autostart status by unchecking the box in AutoRuns. (I avoided hardware drivers, Microsoft drivers, and drivers for actual autostart programs.) Three times when I restarted after this limited driver-autostart disabling I got the STOP: 0X0000007B blue screen. I was in effect forced to use Last Known Good Configuration on the subsequent startups, and this restored all the autostarts I had disabled. To test what was going on, I shut down my system without disabling any driver autostarts, and the system started normally.


I tried disabling via AutoRuns only two files in the system32\drivers folders that were implicated in previous blue screens : wrkrn.sys (associated with Webroot, which after expiration had continued on my system as an on-demand scanner) and vvbackd5.sys (associated with a FarStone program which I had not yet chosen to utilize). I got the STOP: 0X0000007B blue screen again. After this in my frustration I shredded wrkrn.sys and vvbackd5.sys.

Really bad move. After this I continually get the STOP: 0X0000007B blue screen when I try to start the computer. On the next try I will get the menu that offers "Safe Mode" and "... Read more

A:May have killed my OS by shredding 2 software drivers, could use advice

Hi there,

Since you are having blue screen issues, you might wanna post a thread here: BSOD, App Crashes And Hangs

4 more replies
Answer Match 39.48%

Can any one provide links for the windows 7 drivers and software for my old 3000 lenovo G430 to keeps it alive..... Lenovo care doesnot recognise my notebook S/n number any more or dont provide any support ...even there is no more g430 in the product list

More replies
Answer Match 39.48%

I did a clean install of Windows 10 on my G6 and pretty much a lot of issues resolved itself. However, I wanted to check the Software and Driver page of the Win 7 64bit of my laptop and the website is not showing it at all! I also wanted to find out why HP Connection manager is not working after the upgrade.

More replies
Answer Match 39.48%

I had been having blue screen problems with my old Dell XP. The programs WhoCrashed and BlueScreenView implicated a few drivers of non-essential software as the culprits. I examined the drivers module in AutoRuns (by Sysinternals) and carefully selected non-essential software drivers for disabling of their autostart status by unchecking the box in AutoRuns. (I avoided hardware drivers, Microsoft drivers, and drivers for actual autostart programs.) Three times when I restarted after this limited driver-autostart disabling I got the STOP: 0X0000007B blue screen. I was in effect forced to use Last Known Good Configuration on the subsequent startups, and this restored all the autostarts I had disabled. To test what was going on, I shut down my system without disabling any driver autostarts, and the system started normally.
I tried disabling via AutoRuns only two files in the system32\drivers folders that were implicated in previous blue screens : wrkrn.sys (associated with Webroot, which after expiration had continued on my system as an on-demand scanner) and vvbackd5.sys (associated with a FarStone program which I had not yet chosen to utilize). I got the STOP: 0X0000007B blue screen again. After this in my frustration I shredded wrkrn.sys and vvbackd5.sys.
Really bad move. After this I continually get the STOP: 0X0000007B blue screen when I try to start the computer. On the next try I will get the menu that offers "Safe Mode" and "Last Known Good Configuration", etc., but tho... Read more

A:May have killed my OS by shredding 2 software drivers, could use advice

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

2 more replies
Answer Match 39.48%

i have a western digital one terabyte external hard drive (my book) that i need to reinstall drivers for can you help me get the appropriate drivers?
 

A:external hard drive software drivers

I don't think you should need any drivers.!!
 

2 more replies
Answer Match 39.48%

Hi all,
I have a Dell XPS13 9350 - only a month old. Everything is wonderful so far but Dell Update software sometimes does not pick up on new drivers. The other days, BIOS 1.4.4 and two new thunderbolt drivers and firmware were uploaded to the Dell website. I ran Dell Update but it did not download those and said my computer was up to date. Yes, I can go to the website and download them manually but the Dell Update software is very convenient. Any thoughts?
Thanks all,
AJ

More replies
Answer Match 39.48%

    I had been having blue screen problems with my old Dell XP. The programs WhoCrashed and BlueScreenView implicated a few drivers of non-essential software as the culprits. I examined the drivers module in AutoRuns (by Sysinternals) and carefully selected non-essential software drivers for disabling of their autostart status by unchecking the box in AutoRuns. (I avoided hardware drivers, Microsoft drivers, and drivers for actual autostart programs.) Three times when I restarted after this limited driver-autostart disabling I got the STOP: 0X0000007B blue screen. I was in effect forced to use Last Known Good Configuration on the subsequent startups, and this restored all the autostarts I had disabled. To test what was going on, I shut down my system without disabling any driver autostarts, and the system started normally.    I tried disabling via AutoRuns only two files in the system32\drivers folders that were implicated in previous blue screens : wrkrn.sys (associated with Webroot, which after expiration had continued on my system as an on-demand scanner) and vvbackd5.sys (associated with a FarStone program which I had not yet chosen to utilize). I got the STOP: 0X0000007B blue screen again. After this in my frustration I shredded wrkrn.sys and vvbackd5.sys.    Really bad move. After this I continually get the STOP: 0X0000007B blue screen when I try to start the computer. On the next try I will get the menu that offers "Safe Mode" an... Read more

A:May have killed my OS by shredding 2 software drivers, could use advice

An Option...

1 more replies
Answer Match 39.48%

I really want to use the fingerprint reader on the HP Probook 430 G2, which is a Validity VFS495.The default wat is to use HP's security software, which I don't want to use.Another option would be to use Windows 8.1's built in "Biometrics" feature, but it's not enabled for some reason.Some reading into the issue told me that I need to install a "Windows Biometric Framework" enabled driver, but I couldn't find a working driver for the VFS495.It was suggested on multiple forums to download and use the driver from "http://www.validityinc.com/software/hp/wbf.php", but that link seems to be dead.Is there any other solution that would allow me to use the fingerprint reader without HP's software, or perhaps does anyone have a mirror to Validity's WBF driver?Thank you,-Elad











Solved!
View Solution.

A:Validity Fingerprint Sensor WBF drivers (without HP software...

After much research, I finally found a solution.The Dell E5440 uses the same sensor, but a newer driver that's WBF compatible.I installed Dell's driver and everything works fine now - the fingerprint sensor is detected by the operating system's native security features without any HP software neccesary.The link to Dell's driver, to anyone interested, is here.

10 more replies
Answer Match 39.48%

Hello All

I have recently been given my brothers Toshiba Equium M70-173. It crashed soon after i got the laptop and would not turn on, a slightly more technical friend of mine managed to get it working but when it turns on the following message is displayed;

WARNING; immediately backup your data and replace your hard disk drive a failure may be iminent.
press F1 to contiune

after pressing F1 i am able to access the laptop, it is unable to staor information due to something being either corrupt or missing.

OK so after the waffle here comes the question,

I have bought a new hard drive, whilst in the shop i was told i would need the Toshiba product recovery cd/dvd & the drivers disc? now my brother has neither of these and i do not know how to go about fitting the harddrive if i need these discs once its been fitted.
doi need the discs? can i make back ups? if not where can i find them from/ are they downloadbale from the toshiba website?

just so its clear their is nothing on the laptop i need so it can be completley wiped.

thanks for any info or direction u can provide

Peter
 

A:a little unsure, recovery and drivers new software needed?

Duplicate of this thread that does have a reply:

http://forums.techguy.org/windows-nt-2000-xp/703935-iminent-failure-recovery-discs.html
 

1 more replies
Answer Match 39.48%

26 July 2016 there are no drivers or software listed on HP Support page for my product dv6-7014nr.  There is a message -We were unable to find any drivers for your product. Drivers may be in development so please check back at a later date or visit the product homepage. -end When will drivers and software be available? They were listed yesterday when I began the process of clean install of Windows 7 x64. Now they are not listed today and I'm left with a non working system due to no access to drivers. Thank you.

A:No Drivers or Software listed on HP Support for dv6-7014nr

@Oberkanone? Drivers, User Guides and Product Specs are down at the moment. Sorry for any inconvenience. REO

1 more replies
Answer Match 39.48%

I can't locate any softwear or drivers for My HP Pavilion notebook G6-2269 WM the website shows that there are none and to check back. I recently had troubles with my computer and decided to reset my computer. Since doing so it says there are no operastion systems found the product key from the bottom of the computer wont work since the windows 7 was preinstalled says to contact computer manufactuar. Manuafctor wont help since computer isnt under warranty. I then decided to just install windows 10 on to the computer since i cant get windows 7 well its telling me there are no drivers found. The back up disks i have made arent working maybe i didnt burn them correctly either way i am needing to download drivers to my computer . Any help would be very appreated this isn't something i deal with a lot. 

A:no drivers or software found for hp pavilion g6-2269wm

@Tarad3? Drivers, some User Guides and Product Information is down at the moment. HP has been notified and is working on it. Please check back later. Sorry for any inconvenience. REO

2 more replies
Answer Match 39.48%

Rather than ask a question for a change, I want to point out an issue with the HP support website. If you go to the software and driver page your PC, after you specify your model name you need to provide the operating system you are using. When you  choose an operating system and version, the page may still say "No software or drivers are available for this product with the selected operating system." To get the site to search for downloads for your model when this happens, you need to click on the button labeled "Change". It's confusing. I think the button should be labeled "Search" or "Go" or "OK". "Change" does not make sense if you have not previously selected an OS. It made me think that HP support had taken down the drivers for my computer. I hope this post helps at least one person.

More replies
Answer Match 39.48%

Need ring central fax software/drivers for Compaq presario notebook with hp deskjet 970cse printer. Anyone have any ideas where I can locate this? thanks much.
 

More replies
Answer Match 39.48%

hello there win 7 forum
quick question i have got another laptop and well its a dell latitude e6430 well i have to put a new hdd in it and
well im just wondering as its win 7 which is no problem do i need any other drivers for it as love to get it going great and fast but no crap ware.the problem is i was on the dell website and well its difficult to find out what software and drivers i really need.could any of you real nice people please point me in the right direction and what i need to download.cheers

Product Support | Dell UK

A:Dell latitude e6430 drivers and software new hdd

Windows will install most of the drivers. In most cases you will need to download and install the correct sound driver as Windows will only install the generic, basic function High Definition Audio Driver. Any specific Dell hardware drivers may need to be installed.

If the Latitude came with Windows 7, access the Dell downloads using the service tag number and it will list all applicable drivers, as it was originally built.

8 more replies
Answer Match 39.48%

A friend passed along to me a Boston Acoustics Digital Media Theater Speaker set that was passed along to him. My pc will not recognize the speaker system. I'm guessing that's because I do not have the original software that goes with the speaker system to install. My friend never had the software so it didn't work for him either.

Is there a way to get the appropriate software so I can use the sound system. There is no model number on the speakers, just the BADMT title. It has two small speakers and a subwoofer. I looked at some driver sites and just had no idea where to begin.
 

A:Solved: boston acoustics software/drivers

7 more replies
Answer Match 39.48%

Have a very trusty HP 7410 All-In-One scanner/printer that has worked well since I bought it I think in 2005.

But...I can not get the current HP printer/scanner drivers to uninstall/unload and/or can not get the current HP drivers/program system install download to correctly install. This is the only issue and can not get any reply from the HP customer support forums ?

Can I use a 3rd party scanner driver with the 7410 ? The default Windows 7 Pro system driver runs/works fine for printing...but I have no scanner driver for the HP while I can't get the HP scanner driver to install.

As far as the other garbage/stuff in the HP main install files...I can work just fine without these programs with comparable apps on my system now. Just really need the scanning features for both work/personal stuff !

A:Are there good drivers/scan software for HP printers out there

Which drivers did you try?

HP claims to have a full-featured package for the 7410:

Software & Driver Downloads HP Officejet 7410 All-in-One Printer - HP Customer Care (United States - English)

(360MB download.)

The third-party application Vuescan claims to support the 7400:

Hewlett-Packard OfficeJet 7400 Scanner Driver and Software

but it requires that some HP drivers be installed as well.

Good luck.

1 more replies
Answer Match 39.48%

can i disable drivers software of inicialization of computer like realtek high defetion driver software?
 

A:can i disable drivers software of inicialization of computer?

why do you do that?
 

1 more replies
Answer Match 39.48%

Hello Everyone,

I have Gigabyte motherboard GA-790FXTA-UD5. The chipset as you can see is AMD 7 series - namely 790FX. Now my question is:
Can anyone tell me where I can download the drivers for the said chipset apart from Gigabyte website as I believe the ones on their website are not up to date (audio and LAN on their website are definitely not up to date)? I did try AMD website but the layout is so misleading and confusing, that after downloading something which I think is chipset driver, I decided that in the future I don't want to have anything to do with AMD and their chipsets..

The reason I'm looking for updated drivers is that I tried one of those glorious driver update softwares and it turned out that my drivers (the ones from gigabyte)were not up to date.

I did install the drivers from AMD website and now all driver update software checks confirm that my chipset drivers are up to date (although looking at the extracted folders these drivers seem to be AMD South Bridge 8xx - whereas mine is SB750). What's more, I did contact AMD for information in regard to my problem and they pointed me towards Gigabyte website and the drivers from their website (the "not up to date" ones). Well, isn't that confusing??

I would like to also get to know your opinion on the driver update software. Is it reliable and worth using? If so, which one would you recommend. I personally have purchased Driver Genius Professional and it seems it serves its purpose very wel... Read more

A:AMD chipset drivers & driver update software

This site would have the most up to date
AMD.com | Support & Downloads

8 more replies
Answer Match 39.48%

I've seen some software like this before but can't remember the name of the software itself. Can anyone tell me a good software that auto-update a computer's drivers? Freeware would be great.

A:Software that auto-updates drivers of a computer

Windows Update usually has a good crop of updated drivers. In the update settings, start, All Progams, Windows Update, change settings.
Tick the button that says "Give me recommended updates....."
There is SlimDrivers which will search your hard ware and tell you about updated drivers, bbut doesn't do it automatically. It may suggest driver for non-existent hardware though. You will need to take a good look at its findings.

9 more replies
Answer Match 39.48%

I had been having blue screen problems with my old Dell XP. The programs WhoCrashed and BlueScreenView implicated a few drivers of non-essential software as the culprits. I examined the drivers module in AutoRuns (by Sysinternals) and carefully selected non-essential software drivers for disabling of their autostart status by unchecking the box in AutoRuns. (I avoided hardware drivers, Microsoft drivers, and drivers for actual autostart programs.) Three times when I restarted after this limited driver-autostart disabling I got the STOP: 0X0000007B blue screen. I was in effect forced to use Last Known Good Configuration on the subsequent startups, and this restored all the autostarts I had disabled. To test what was going on, I shut down my system without disabling any driver autostarts, and the system started normally.

I tried disabling via AutoRuns only two files in the system32\drivers folders that were implicated in previous blue screens : wrkrn.sys (associated with Webroot, which after expiration had continued on my system as an on-demand scanner) and vvbackd5.sys (associated with a FarStone program which I had not yet chosen to utilize). I got the STOP: 0X0000007B blue screen again. After this in my frustration I shredded wrkrn.sys and vvbackd5.sys.

Really bad move. After this I continually get the STOP: 0X0000007B blue screen when I try to start the computer. On the next try I will get the menu that offers "Safe Mode" and "Last Known Good Configuration&... Read more

A:May have killed my OS by shredding 2 software drivers, could use advice

If the hard drive didn't crash, you can copy all your data off of it.

I can't tell from your post what's broken. It's a really old computer.
 

3 more replies
Answer Match 39.48%

Hi

I just got a new printer and i need to remove all the " stuff" drivers etc that comes from the old printer , any idea's how to make sure i get it all removed.

Thanks

Dan
 

A:Solved: Dell Printer drivers and software

First go to Add Or Remove Programs in the Control Panel and uninstall anything related to he old printer. Then also in the Control Panel go to Printers & Faxes and if the old printer is still listed then delete it.
 

2 more replies
Answer Match 39.48%

Hello,

I've owned a Logitech Quickcam Pro 9000 for a couple of years, and it has worked fine until fairly recently. I haven't used it in several months, but when I started using it again a few months ago, the video in the preview window and any video I record had an annoying flicker to it (about 3-4 flashes per second). It's also very jerky -- every few frames one of the previous frames pops up.

The only significant change I made to my computer during the time I wasn't using the webcam was upgrading my NVIDIA GeForce 5200 graphics card to an NVIDIA GeForce GT 430. I also tried installing the camera on a HP Pavillion dm4 laptop and an HP All-in-One 200 series (both running Windows 7 Home Premium 64-bit), and there was no problem with the video on either computer.

I've tried uninstalling and reinstalling the Logitech software, switching the camera between different USB ports, updating my graphics card's drivers and adjusting every setting on the webcam I could think of -- so far, nothing has helped. The lighting still flickers, and the video I record is irritatingly jerky. I've tried contacting Logitech multiple times, and they've been unable to help me -- every time I think they've fixed my problem, it comes back again when I restart the computer. I've also tried contacting NVIDIA, and they suggested completely uninstalling the Logitech software and doing a clean reinstall.

That's when I realized that I must not have u... Read more

A:Unable to uninstall Quickcam 11.9 software and drivers

Have you tried running the original installer program to see if it has an uninstall option?

Did you look through all the program names?

Have you used any "cleaning" programs that may have damaged your system?
 

3 more replies