Tech Problem Aggregator

Dump File: Monitor.sys

Q: Dump File: Monitor.sys

The computer would randomly go to a black screen when working. After using software at my disposal, I found there to be a monitor.sys dump file that is causing the problem. What would be the root cause of this and could I fix it?

Or could this be the actual hardware that is throwing the dump file? Any help would be greatly appreciated!

Thanks!

A: Dump File: Monitor.sys

Any ideas how to go about fixing dump files in general?

1 more replies
Answer Match 58.38%
A:BSOD, and no dump file was found even though dump file anabled.

That is this driver,

Killer Networking - Standard Drivers (no Killer Features)

You still need to follow the posting instructions if you want help.

1 more replies
Answer Match 55.86%

I've been having BSoD's for well over a year now, once or twice almost every day. I've tried multiple times to figure out whats wrong but... I dont have ANY dump files.

I've followed instructions on how to enable them but it still doesn't create a file. Im really hoping you all can help me out here.

The current settings are:
Page files on both hard drives enabled.
Set custom page size to 17000MB-20000MB
System managed size and no paging file boxes are unchecked
Write an event to system log box checked
Automatically restart unchecked
Debug information set to small memory dump/kernal. Both settings dont work
Overwrite existing file box is greyed out when debug is set to small memory. Checked when set to kernal
Small and kernal memory dump location set to C:\Windows\Minidump and C:\Windows\Memory.DMP I created these folders as they were not present

I got a SSD awhile back and use it for my windows. However i didnt reformat my other hard drive and windows is still installed on the old one however i boot from the SSD (maybe this is some how the problem)

Im using WhoCrashed from Resplendence Software - Advanced System Tools and Developer Components to force a BSoD when trying to creat a dump file.

There are NO files in either folder. Both on the SSD or old hard drive.

I've searched many forums now and found others with what seems to be the same problem but with no solutions. I would VERY much appreciate the help!
The BSoD's seem to mostly happen when play... Read more

A:No dump file after BSoD. Dump files ARE enabled

Wrote stuff that was wrong. Ignore this reply

9 more replies
Answer Match 46.2%

My laptop will boot and run but after a few minutes the monitor starts acting funny, with white lines all over it, until the computer freezes. I ran windbg on a crash dump that was listed under "video hardware error" and got the following bug report:

Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
VIDEO_TDR_TIMEOUT_DETECTED (117)
The display driver failed to respond in timely fashion.
(This code can never be used for real bugcheck).
Arguments:
Arg1: 83f13008, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: 8a406fb0, The pointer into responsible device driver module (e.g owner tag).
Arg3: 00000000, The secondary driver specific bucketing key.
Arg4: 00000000, Optional internal context dependent data.
Debugging Details:
------------------
AUTOBUG_USER_LCID_STR: ENU
AUTOBUG_OS_SKU: 3
FAULTING_IP:
nvlddmkm+3fb0
8a406fb0 ?? ???
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_TIMEOUT
TAG_NOT_DEFINED_202b: *** Unknown TAG in analysis list 202b
BUGCHECK_STR: 0x117
PROCESS_NAME: System
CURRENT_IRQL: 0
STACK_TEXT:
WARNING: Stack unwind information not ava... Read more

A:HP Pavilion dv9201ca monitor failure, crash dump included

There may be Known issue with that model, check to see if that particular model is listed.

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=ca&docname=c01087277
 

3 more replies
Answer Match 45.78%

Hi all, everything was running ok recently until i installed dragon age : origins now i am getting another crash situation...everything just freezes and nothing..no BSOD just a buzzing noise from my speakers and a black screen..if someone could look at my Dump file i would appreciate it..thanks in advance.

A:Can someone look at this Dump file please?

  
Quote: Originally Posted by Rayzor


Hi all, everything was running ok recently until i installed dragon age : origins now i am getting another crash situation...everything just freezes and nothing..no BSOD just a buzzing noise from my speakers and a black screen..if someone could look at my Dump file i would appreciate it..thanks in advance.


Hello Rayzor, Welcome to SF,

The Bug Check Code is referring to 0x00000124 please go through this
http://www.sevenforums.com/crash-loc...-what-try.html

Bugcheck Analysis


Code:


Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\020410-16598-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

WARNING: Whitespace at end of path element
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02865000 PsLoadedModuleList = 0xfffff800`02aa2e50
Debug session time: Fri Feb 5 04:46:44.682 2010 (GMT+5)
System Uptime: 0 days 0:00:04.477
Loading Kernel Symbols
.................................................
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
****************************************... Read more

2 more replies
Answer Match 45.78%

I hope this dump file would identify the problem.

A:At last I have a dump file!

  
Quote: Originally Posted by IMAyNeed


I hope this dump file would identify the problem.


This one was blamed on mdfsysnt.SYS driver the Mac HD driver. http://www.mediafour.com/products/macdrive
Best guess is to re-install it and run a system file check to verify and repair your system files

Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

Read here for more information SFC /SCANNOW Command - System File Checker

Let us know the results from the report at the end.

Old driver needing update

Code:
MarvinBus64.sys 9/23/2005 05:17:03 PM fffff880`04f85000 fffff880`04fc9000 0x00044000 0x433470cf
speedfan.sys 9/24/2006 09:26:48 AM fffff880`01b46000 fffff880`01b4d000 0x00007000 0x45168798
ASMMAP64.sys 2/4/2007 03:52:56 PM fffff880`036b6000 fffff880`036bd000 0x00007000 0x45c63998
sncduvc.SYS 12/29/2008 05:14:26 AM fffff880`02bd8000 fffff880`02be0a80 0x00008a80 0x495894f2
AsDsm.sys 2/13/2009 02:14:26 AM fffff880`011ed000 fffff880`011fa000 0x0000d000 0x49950fc2
mcdbus.sys 2/24/2009 06:34:07 AM fffff880`04ed4000 fffff880`04f10880 0x0003c880 0x49a3cd1f
spldr.sys 5/11/2009 12:5... Read more

3 more replies
Answer Match 45.78%

Hello,
I have this dump file that i am having a hard time finding out what is going on. I have recently rebuilt this server it a hp dl360. not much running on it. i would be greatful of someone can take a look at it
thanks
*** WARNING: Unable to verify timestamp for tcpip.sys
*** ERROR: Module load completed but symbols could not be loaded for tcpip.sys
Probably caused by : tcpip.sys ( tcpip+20f9 )

Followup: MachineOwner
---------
Loading Dump File [Z:\Mini043008-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: set_NT_SYMBOL_PATH=srv*C:\Program Files\Debugging Tools for Windows\sym*http://msdl.microsoft.com/download/symbols

Executable search path is:
Windows Server 2003 Kernel Version 3790 MP (4 procs) Free x86 compatible
Product: Server, suite: Enterprise TerminalServer SingleUserTS
Built by: 3790.srv03_gdr.070301-2306
Kernel base = 0x804de000 PsLoadedModuleList = 0x8056e6a8
Debug session time: Wed Apr 30 02:13:32.951 2008 (GMT-4)
System Uptime: 0 days 6:32:17.609
Loading Kernel Symbols
........................................................................................................
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {207efeee, 2,... Read more

More replies
Answer Match 45.78%

hello my question is that no one can figure out
why my computer keeps crashing when i play games anything else its fine
but using shockwave or just playing games in general reboots my system
with a blue screen of death so i changed out a few video cards went from
asus 9550 128mb to pny 6200 256mb but still have the same problem so i
put in a cheap pci video card and it still does it I have a dump file
here for you to examine

i have windows xp pro sp2 with abit kw7 mobo with corsair 512mb dual channel 3200 mem and a
sata 80 gig harddrive
a AMD xp 2700 cpu ohh and here is the dump file please help because i
have no where else to go I will pay if neccessary

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

NOTE: This is a hardware error. This error was reported by the CPU
via Interrupt 18. This analysis will provide more information about
the specific error. Please contact the manufacturer for additional
information about this error and troubleshooting assistance.

This error is documented in the following publication:

- Bios and Kernel Developers Guid for AMD Athlon(r) 64 and AMD
Opteron(r) Processors
Bit Mask:

MA Model Specific MCA
O ID Other Information Error Code Error Code
VV SDP ___________|____________ _______|_______ _______|______
AEUECRC| | | |
LRCNVVC| | | |
^^^^^^^| | | |
6 5 4 3 2 1
3210987654321098765432109876543210987654321098765432109876543210
----------------------------------------------------------------
1100010000001000010000000000000000... Read more

More replies
Answer Match 45.78%

I don't seem to have a dump file. Is it necessary? Can someone help me try and locate it or install a new one? Thanks

A:Where's my Dump File

Hi,

Do you mean a .dmp file, created after a system has crashed? Have a look in C:\Windows\Minidump

Read this: Dump File - Change Default Location

Regards,
Golden

4 more replies
Answer Match 45.78%

Here is the .dmp file that I get. Looks like a driver issue. What do you guys think.

POOL_ADDRESS: e1145798

FREED_POOL_TAG: FSim

BUGCHECK_STR: 0xc2_7_FSim

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: DRIVER_FAULT

LAST_CONTROL_TRANSFER: from 8053a50d to 804f573b

STACK_TEXT:

a9b9ab8c 8053a50d 000000c2 00000007 00000cd4 nt!PsChargeProcessNonPagedPoolQuota+0x44

a9b9ab8c e32f28d0 000000c2 00000007 00000cd4 nt!KiTrap04+0x97

WARNING: Frame IP not in any known module. Following frames may be wrong.

e1145794 00000000 00000000 00000001 816f62d8 0xe32f28d0



FOLLOWUP_IP:

nt!PsChargeProcessNonPagedPoolQuota+44

804f573b 5d pop ebp

SYMBOL_STACK_INDEX: 0

FOLLOWUP_NAME: MachineOwner

SYMBOL_NAME: nt!PsChargeProcessNonPagedPoolQuota+44

MODULE_NAME: nt

IMAGE_NAME: ntoskrnl.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 42250a91

STACK_COMMAND: kb

FAILURE_BUCKET_ID: 0xc2_7_FSim_nt!PsChargeProcessNonPagedPoolQuota+44

BUCKET_ID: 0xc2_7_FSim_nt!PsChargeProcessNonPagedPoolQuota+44

Followup: MachineOwner
 

More replies
Answer Match 45.78%

My PC has crashed several times. Attached is the Windows_NT6_BSOD_jcgriff2 zip file as requested for BSOD analysis.

This is a custom built PC running W7 Professional 64-bit built about 7-8 months ago.

Can someone help me figure out why it's crashing?

Thanks!

A:Help with Dump File

  
Quote: Originally Posted by pongolo


My PC has crashed several times. Attached is the Windows_NT6_BSOD_jcgriff2 zip file as requested for BSOD analysis.

This is a custom built PC running W7 Professional 64-bit built about 7-8 months ago.

Can someone help me figure out why it's crashing?

Thanks!


ASACPI.sys Sun Mar 27 22:30:36 2005





Quote:
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).

2 more replies
Answer Match 45.78%

I'd like to be able to read the .dmp file crreated and sent to Microsoft when an application has a problem. How can I go about doing that?

THX - FK

A:Dump file

This may help you

2 more replies
Answer Match 45.78%

Could someone please help me to read the dmp files? I've been getting multiple BSOD's lately.

I tried several times last night on my W7 PC and it wasn't working. I tried the debugger and that said to I don't have the proper symbols, so I installed that and directed debugger to it, but it didn't help.

I'm not too sure how the dumpfiles work, but I am at work now, so I don't think I can do anything with the files here (on XP).

I'll attach the recent dumps.
Quick History:
Built the PC a little more than a month ago, installed XP. Had BSOD's but figured it was XP related, so let it be (knowing I was going to install W7 in a few weeks). Once W7 was out I installed it and have run into far less BSOD's. Only having one until yesterday when I had 5 in like an hour or so.
Thanks.

A:Dump file help

Run memtest for as long as you can. 5 hours at least. I think there is something wrong with you RAM module(s). Especially because you said XP and here on 7.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [E:\Temp\Rar$DI12.937\110309-25412-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a09000 PsLoadedModuleList = 0xfffff800`02c46e50
Debug session time: Tue Nov 3 19:45:34.850 2009 (GMT-5)
System Uptime: 0 days 0:44:15.927
Loading Kernel Symbols
...............................................................
................................................................
...............
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analy... Read more

9 more replies
Answer Match 45.78%

A friend has a Dell latitude E6410 that has been crashing every so often. It is also getting some wierd video, almost like a really bad 8-bit video game. I am attaching the SF Diagnostics Tool reports. If someone could take a look at them and help me in figuring out what is wrong with the machine, that would be great.

A:Dump file help

Hi and Welcome to SF,

This is pretty straight forward,The error appears to be caused by e1k6232.sys. Looking on the net, it appears that this is a network card driver, please download and install fresh copy of it.
you can get more info from the Software Environment\System Drivers node of the msinfo32.exe utility and then look at the drivers in use under the Components node.

BUGCHECK SUMMARY:

Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\TUANTR~1\AppData\Local\Temp\Rar$DI00.009\072110-36254-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*e:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0x82c43000 PsLoadedModuleList = 0x82d8b810
Debug session time: Wed Jul 21 22:25:30.879 2010 (UTC + 7:00)
System Uptime: 0 days 1:15:11.065
Loading Kernel Symbols
...............................................................
................................................................
..........................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* ... Read more

1 more replies
Answer Match 45.78%

Hi, I am having issue reading the dumpfile after installing the dbugging tool.

"Symbol search path is: %windir%\symbols
Executable search path is:
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16695.x86fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0x82c42000 PsLoadedModuleList = 0x82d8a810
Debug session time: Wed Jan 2 09:07:58.289 2002 (UTC + 0:00)
System Uptime: 0 days 0:00:35.178
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2"

The sysmbols are installed.

Can someone look at the dump and tell be what it is pointing to? I supect a system file is corrupt but startup repair wont work.

Thnk you

A:Dump file help

Corrupt system files aren't very likely - as Windows System File Checker does a good job of ensuring that they don't get corrupted.

Quite often this type of error is due to a virus infection, so I'd suggest trying a couple of these free, online scans (in case your antivirus has become corrupted): Free Online AntiMalware Scanners

If that doesn't fix things up, then please post this info: http://www.sevenforums.com/crashes-d...tructions.html

Then please uninstall Daemon Tools/Alcohol 120% (a known cause of BSOD's).
Then use this free tool to remove the offending sptd.sys driver: DuplexSecure - FAQ - Remove 32 bit sptd.sys

Then do this:
OLDER DRIVERS PRESENT IN THE DUMP FILES
- Please update these drivers from the device manufacturer's website - or uninstall/remove them from your system. Reference links included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers:





Quote:

Code:

sptd.sys Sun Oct 11 16:54:02 2009 (4AD245EA)
nvstor32.sys Wed Apr 29 21:52:55 2009 (49F90477)
amdxata.sys Tue May 19 13:57:35 2009 (4A12F30F)
Rt86win7.sys Thu Feb 26 04:04:22 2009 (49A65B16)
lmimirr.sys Tue Apr 10 18:32:11 2007 (461C106B)
AsIO.sys Mon Dec 17 04:10:20 2007 (47663CFC)
ASACPI.sys Wed May 13 07:11:32 2009 (4A0AAAE4)
nvsmu.sys Fri Apr 24 23:07:19 20... Read more

1 more replies
Answer Match 45.78%

Here is the dump file

A:Dump file

Thanks for the help

6 more replies
Answer Match 45.78%

Hello, im very new to this so if i make some mistakes , sorry for that.
Sinds a short time i noticed a system problem and for the first time i saw a blue screen. it robooted and thats it... At some moments i notice that the processor suddenly goes from 10 to 40%. usually after that and when i reboot it shows the message i can see the dump file, i could never see that untill i installed the driverkit.. How to open DMP files in Windows 7? | Windows 7 Themes

My system is a i5, 64 bit, 8GB memory, 650 @320ghz
maybe 1 year old.

Below is the dump, who can tell me whats wrong ?


*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8007eba028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000800400, Low order 32-bits of the MCi_STATUS value.
Debugging Details:
------------------

BUGCHECK_STR: 0x124_GenuineIntel
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: f
STACK_TEXT:
fffff880`009efa58 fffff800`03219a3b... Read more

A:My dump file

Looks like a hardware defect in your CPU

Stop 0x124 - what it means and what to try

Please stop any overclocking

Run Prime 95 to test your CPU. Carefully the instructions in this tutorial: CPU - Stress Test with Prime95. Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs). Post back with your results.

Code:
FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE
BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_MAE

4 more replies
Answer Match 45.78%

I've heard the term memory dump file or dump file being used? I was wondering what it means?

I've gathered that it may be something to do with error messages or errors.

A:What is a dump file?

Stuff in RAM automatically gets wiped when you shut down or reboot. The dump file saves that info to your hard drive when the system crashes so you can analyze it after rebooting and are up and running again.

For a once-in-a-blue-moon BSOD a person might not care. When BSODs get to be a frequent event it makes it worth analyzing the problem so you can put an end to it.

5 more replies
Answer Match 45.78%

Hello,

I have a HP EliteBook 8540p running Windows 7 64bit. I had posted on here a few weeks back about a similar system crashing, and through the help I got I was able to come up with a fix that has helped 99% of the people using this laptop on my network. There is still one that is having problems, and I am hoping someone can take a look at the attached dmp file and see if it is clear which drivers are causing problems.

Thanks in advance!

Scott

A:Help with a dump file

  
Quote: Originally Posted by sford422


Hello,

I have a HP EliteBook 8540p running Windows 7 64bit. I had posted on here a few weeks back about a similar system crashing, and through the help I got I was able to come up with a fix that has helped 99% of the people using this laptop on my network. There is still one that is having problems, and I am hoping someone can take a look at the attached dmp file and see if it is clear which drivers are causing problems.

Thanks in advance!

Scott


Hi scott and welcome
A couple of problems.
1- your video driver is the probable cause of this crash.

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.

2-Old drivers (from as far back as 2005) need to be updated. Obviously not a clean install of win 7 as recommended, Yhese are important drivers like your storage (raid) networking, etc.


Code:
iirsp.sys 12/13/2005 16:47:54 0x439f418a fffff880`010bb000 fffff880`010cc000 0x00011000
nfrd960.sys 6/6/2006 16:11:48 0x4485ef94 fffff880`01702000 fffff880`01712000 0x00010000
adpu320.sys 2/27/2007 19:04:15 0x45e4c6ff fffff880`0115a000 fffff880`01189000 0x0002f000
adpahci.sys 5/1/2007 12:30:09 0x46377921 fffff88... Read more

1 more replies
Answer Match 45.78%

I am thinking this is RAM by looking at the debug details, but the CPU part has me wondering. Can some check out this dump for me?
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\MEMORY.DMP]
Kernel Complete Dump File: Full address space is available

************************************************************
WARNING: Dump file has been truncated. Data may be missing.
************************************************************
Symbol search path is: C:\Windows\Symbols
Executable search path is:
*** WARNING: symbols timestamp is wrong 0x4b7a1beb 0x3ee650b3 for ntkrnlmp.exe
Windows 2000 Kernel Version 2195 (Service Pack 4) MP (2 procs) Free x86 compatible
Product: Server, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0x80400000 PsLoadedModuleList = 0x80485bc0
Debug session time: Wed Jul 28 08:53:36.857 2010 (GMT-4)
System Uptime: 46 days 7:42:50.421
*** WARNING: symbols timestamp is wrong 0x4b7a1beb 0x3ee650b3 for ntkrnlmp.exe
Loading Kernel Symbols
...............................................................
...................................................
Loading User Symbols

Loading unloaded module list
..................................................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v ... Read more

A:Help with dump file

Bump.
 

1 more replies
Answer Match 45.78%

hi,
sometimes when i use WinAvi AiO Converter my PC is crashing.

if anyone could help me with the dump file ill be greatfull dead to him.
Dump File: https://www.firedrive.com/file/1703FE3C21D1337B

Thank You:

p.s.
after restart i get a Blue Screen message :


Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800D64A028
BCP3: 00000000BF800000
BCP4: 0000000000000124
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\091214-7300-01.dmp
C:\Users\ODED\AppData\Local\Temp\WER-15958-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:Help With Dump File Please.

Hello and welcome oded mate I cannot open that file list you sent as it needs athird party app to do it take a look at this and then post back
Blue Screen of Death (BSOD) Posting Instructions

6 more replies
Answer Match 44.94%

Hi guys,
I found everything about how to read out the Dumpfiles but now I have a problem to interpret it . Maybe someone of you is able to give me the information, where the problem in my system occures. Here is my Dump file:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, The subtype of the bugcheck.
Arg2: fffffa800036cc90
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------
BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002ef7f9e to fffff80002e84740

STACK_TEXT:
fffff880`07a12968 fffff800`02ef7f9e : 00000000`0000001a 00000000`00041790 fffffa80`0036cc90 00000000`0000ffff : nt!KeBugCheckEx
fffff880`07a12970 fffff800`02ec60da : 00000000`00000000 00000000`2850ffff fffffa80`00000000 fffffa80`0549cb30 : nt! ?? ::FNODOBFM::`string'+0x33906
fffff880`07a12b30 fffff800`02e83993 : ffffffff`ffffffff 00000000`039ff6f8 00000000`039ff6f0 00000000`00008000 ... Read more

A:Cannot interpret Dump file

Simply put, that dump doesn't give us the info we want.

It blames ntkrnlmp.exe, which is the main Windows NT Kernel driver. That means whatever offending driver gave up control to the kernel before it crashed.

Or, it means hardware is the cause.

We do know it has the bugcheck 1A. You can read about it here: http://www.carrona.org/bsodindx.html#0x0000001A

You can try enabling driver verifier, to try to get a third-party driver to crash, and leave evidence in dump.

http://www.techsupportforum.com/f217...ed-473665.html

If driver verifier doesn't give conclusive evidence, we can start testing hardware.

If you want to try to debug the dumps yourself, we will be happy to assist you. We are also happy to do it ourselves. If you would like us to take a look, please follow these directions: http://www.techsupportforum.com/f217...ns-452654.html

1 more replies
Answer Match 44.94%

Does anything below mean anything thing to anyone? I used the nirsoft link and I just copied and pasted the info here:
061813-19609-01.dmp 6/18/2013 9:51:10 PM 0x00000116 fffffa80`06638010 fffff880`049ce010 ffffffff`c00000b5 00000000`0000000a dxgkrnl.sys dxgkrnl.sys+5d054 DirectX Graphics Kernel Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.18126 (win7sp1_gdr.130409-1534) x64 ntoskrnl.exe+75c00 C:\Windows\Minidump\061813-19609-01.dmp 8 15 7601 304,048 6/18/2013 9:52:46 PM

dxgkrnl.sys dxgkrnl.sys+5d054 fffff880`03e32000 fffff880`03f26000 0x000f4000 0x5164dc49 4/9/2013 10:28:09 PM Microsoft® Windows® Operating System DirectX Graphics Kernel 6.1.7601.18126 (win7sp1_gdr.130409-1534) Microsoft Corporation C:\Windows\system32\drivers\dxgkrnl.sys
dxgmms1.sys dxgmms1.sys+ff13 fffff880`03f26000 fffff880`03f6c000 0x00046000 0x5164dc13 4/9/2013 10:27:15 PM Microsoft® Windows® Operating System DirectX Graphics MMS 6.1.7601.18126 (win7sp1_gdr.130409-1534) Microsoft Corporation C:\Windows\system32\drivers\dxgmms1.sys
nvlddmkm.sys nvlddmkm.sys+13b010 fffff880`04893000 fffff880`05374000 0x00ae1000 0x518fe8f9 5/12/2013 2:09:45 PM NVIDIA Windows Kernel Mode Driver, Version 320.49 NVIDIA Windows Kernel Mode Driver, Version 320.49 9.18.13.2049 NVIDIA Corporation C:\Windows\system32\drivers\nvlddmkm.sys
ntoskrnl.exe fffff800`02e67000 fffff800`0344d000 0x005e6000 0x5147d9c6 3/18/2013 10:21:42 PM Microsoft® Windows® Operating System NT Kernel & System 6.1.7601.1... Read more

More replies
Answer Match 44.94%

received BSOD and need help figuring out issue. Attached .DMP file. Renamed file .old because it wouldnt allow me to upload the .dmp

A:BSOD need help with dump file

Please follow these instructions
http://www.sevenforums.com/crashes-d...tructions.html

1 more replies
Answer Match 44.94%

I have setup DebugDiag to create a full user dump on a specific exception (System.NullReferenceException)  for .NET 4.0. I am not getting any dump files. Rather I see following in the DebugDiag log file. What I need to do to fix this error?

[20/09/2016 10:26:53 AM]
  Thread exited. Exiting thread - System ID: 11020. Exit code - 0x00000000
[20/09/2016 10:27:01 AM]
  Thread created. New thread - System ID: 11240
Skipping exception event during detach/reload
Request to reload script recieved. Loading control script C:\Program Files\DebugDiag\scripts\CrashRule_WebAppPool_DefaultAppPool.vbs
Loading control script C:\Program Files\DebugDiag\scripts\CrashRule_WebAppPool_DefaultAppPool.vbs
DumpPath set to C:\Program Files\DebugDiag\Logs\Crash rule for IIS web application pool - DefaultAppPool
[20/09/2016 10:28:51 AM]
  Initializing control script
  Clearing any existing breakpoints
  
  Current Breakpoint List(BL)
Script Error
Error Code - 0x800A000D
Error Source [Microsoft VBScript runtime error]
Error Description [Type mismatch: 'g_LikelyClrExceptionKbArg']
Line 678, Column 4

Script Error
Error Code - 0x800A000D
Error Source [Microsoft VBScript runtime error]
Error Description [Type mismatch: 'g_LikelyClrExceptionKbArg']
Line 678, Column 4

More replies
Answer Match 44.94%

I tried using WinDbg. I entered the code (SRV*c:\symbols*http://msdl.microsoft.com/download/symbols) to symbol file path. Then I clicked open crash dump. Then I searched for the file in minidump but when I clicked it said that I am not allowed to access it. So could someone analyse the file? Thanks
Also I was not able to attach the perfmon file for some reason...

X64
Windows 7 Home Premium
2 days

A:BSOD with dump file need help

  
Quote: Originally Posted by FluffyIsKewl


I tried using WinDbg. I entered the code (SRV*c:\symbols*http://msdl.microsoft.com/download/symbols) to symbol file path. Then I clicked open crash dump. Then I searched for the file in minidump but when I clicked it said that I am not allowed to access it. So could someone analyse the file? Thanks
Also I was not able to attach the perfmon file for some reason...

X64
Windows 7 Home Premium
2 days


No DMP included in upload. Try this method.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

5 more replies
Answer Match 44.94%

Have a XP machine that keeps freezing up and/or BSOD'ing. Here is the dump file, any deas?

==================================================
Dump File : Mini101112-01.dmp
Crash Time : 10/11/2012 4:44:24 PM
Bug Check String : KERNEL_MODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x1000008e
Parameter 1 : 0xc0000005
Parameter 2 : 0xb9eff71d
Parameter 3 : 0xb18e2744
Parameter 4 : 0x00000000
Caused By Driver : atapi.sys
Caused By Address : atapi.sys+a71d
File Description : IDE/ATAPI Port Driver
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 5.1.2600.5512 (xpsp.080413-2108)
Processor : 32-bit
Crash Address : atapi.sys+a71d
Stack Address 1 : ntoskrnl.exe+181a9
Stack Address 2 : MpFilter.sys+d4a2
Stack Address 3 : MpFilter.sys+d061
Computer Name :
Full Path : C:\WINDOWS\Minidump\Mini101112-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 2600
Dump File Size : 94,208
==================================================
 

A:XP BSOD'ing - here is dump file

6 more replies
Answer Match 44.94%

===================
System: Win7-Pro
MOBO: ASUS H97-Plus
Memory: 8 GB
===================

Trying to install and execute program that worked fine under XP.
Install appears to work.
When executed get Error 50003.

Any help appreciated"
NOTE: File created in 7-zip. Changed extention to "zip" to unload this post.

More replies
Answer Match 44.94%

Please help to interpret this dump file. I suspect my HD is dying but I have no idea what the dump file might indicate.

Can anyone read it and see?

thanks

More replies
Answer Match 44.94%

Hello There,

I used windbp to analyze the dump file, but I am not a developer so I am having a hard time reading the below code.. Is there an easy way to indentify which drivers is causing the blue screen and make the machine reboot. ?

Any Help Apreciated. thanks


KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 804e73a0, The address that the exception occurred at
Arg3: b49c083c, Trap Frame
Arg4: 00000000

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced
memory at "0x%08lx". The memory could not be "%s".

FAULTING_IP:
nt!PsReturnPoolQuota+17
804e73a0 8b8840010000 mov ecx,[eax+0x140]

TRAP_FRAME: b49c083c -- (.trap ffffffffb49c083c)
ErrCode = 00000000
ea... Read more

A:DUMP FILE, can you help me cpc2004 ?

Hi,

One minidump is insufficient to determine the culrit. Attach 5 to 6 minidumps here.
 

1 more replies
Answer Match 44.94%

This DMP file set will show a BSOD that happened just minutes before. I have used every OS that Microsoft has ever published and I have had more trouble with Windows 10 then any GUI MS OS to date. Oh one more thing the installation of Windows 10 was a clean install from DVD, The free online update was not working out.

DESKTOP-C1SOBOL-Sat_06_18_2016__82203_27.zip

Thanks in advance.

More replies
Answer Match 44.94%

The system has recovered from a serious error, then it goes to microsoft online crash analysis and says I have submitted a bad dump file. Help?? Thanks, Sheree
 

A:Bad dump file submitted

Can you clarify what the precise question is please? And post more details about the problem if possible. Thanks.
 

2 more replies
Answer Match 44.94%

Had a BSOD today just before the login screen.
The system is 14 months old, and my build.
Changes I made yesterday:
Downloaded speccy and google chrome.
No over clocking done.
About a week ago had a side by side error that wouldn't let me open IE9 and CCleaner but when restarting the problem didn't persist.

Other info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88004BC5D69
BCP3: FFFFF88003577488
BCP4: FFFFF88003576CE0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\073111-19359-01.dmp
C:\Users\GZ\AppData\Local\Temp\WER-40685-0.sysdata.xml

Dump file is attached.

Any help would be appreciated.

A:BSOD With Dump File

Not much info from the memory dump that you cited. But the memory dump from 17 Jul points to a network driver
The perfmon report also points to network issues.

Please go to Device Manager and see if there are any problems with the devices in the Network Adapter category. If there are, right click on those devices and select "Uninstall" - then reboot the system. Then re-check Device Manager and see if any of those devices still remain a problem. Let us know what you find out.

Go to this link: GIGABYTE - Motherboard - Socket 1156 - GA-P55-USB3 (rev. 2.0)
Enter the OS specifics in the "Choose your OS" dropdown box.
Download the Realtek LAN driver and install it on your system.
Monitor for further BSOD's

Your USB 3.0 drivers are also older - and that version is also known to cause BSOD's w/some Win7 systems.
So please download the latest version of the USB 3.0 drivers from the above link and install them also.

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\073111-19359-01.dmp]
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Sun Jul 31 10:46:35.210 2011 (UTC - 4:00)
System Uptime: 0 days 0:00:16.021
Probably caused by : ks.sys ( ks!QueryDeviceRelations+1b9 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_ks!QueryDeviceRelations+1b9
Bugcheck code 1000007E
Arguments ffffffff`c0000005 fffff880`04bc5d69 fffff880`0357748... Read more

3 more replies
Answer Match 44.94%

Please help me parse this dump log file. Our windows server 2003 has crashed recently 4 times.

Thanks,
Solomon
 

A:Please help read dump file

Your error is 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

This means requested data was not in memory and an invalid system memory address was referenced. This error can be caused by:

1. Defective memory (including main memory, L2 RAM cache, video RAM).

2. Incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).

This is what I suggest at this time:

A. Run memtest on your RAM for a minimum of 7 Passes. www.memtest.org

B. One processor of note is Sptd.sys which is a driver used by the CD Rom emulation program, Daemon Tools Version 4. There have been reports of problems with this driver. Google it and you'll see what I mean.

Therefore, either uninstall and then re-install or update this program.
 

2 more replies
Answer Match 44.94%

Hi,

I have a laptop that periodically gets a BSOD (I do not have a screenshot of the error message). I have a minidump folder in the Windows directory, but no dump file appears after a BSOD. Is there any kind of tool that I can run to see if any drivers are outdated or corrupted? Any thoughts/suggestions is greatly apprecaited.

Thanks

A:not getting dump file for BSOD

Try this - Dump Files - Configure Windows to Create on BSOD

2 more replies
Answer Match 44.94%

Hey guys, it's been a while since I needed some help, but here goes. I have a windows 7 64 machine, i7 processor, 9 gigs ram, etc. Well, I've done a re install of windows since I bought the machine two months ago.

I noticed, a couple times, that when I woke up, my computer was on the blue screen physical dump page. This has happened twice, and is the reason why I reinstalled windows the first time. I suspect it's because I update my computer automatically during the night.

Nothing has been installed on this save a couple computer games. This computer has NEVER been to any malicious sites, and generally, java is turned off for safer surfing with this. I consider this my productivity machine for video editing, etc. so I really would love to know what's going on here. Thanks in advance, I love what goes on here.

BTW, I hope this is the right dump file, I've never dealt with these.

A:Win7 7 dump file help

Run --> DRIVER VERIFIER - Windows 7 & Vista

Complete system info needed --> BSOD Posting Instructions


jcgriff2

.

7 more replies
Answer Match 44.94%

Hello
Can someone tell me why i receive BSOD when i run Everest?
http://www.mediafire.com/?bcdoekvbdam5tc5
Cheers
 

A:Need help reading a dump file

8 more replies
Answer Match 44.94%

Hi Everyone,

Please find attached a dump file from c:windows\minidump

I recently had a blue screen of death with the following information
BAD_POOL_CALLER

Tech Info:

**** STOP: 0X000000C2 (0X 000000007,0X00001097,0X0000000,0X89ACD008)

the dump file is below any assistance as to the cause would be much appreciated.

A:BSOD Dump File

Hello,

Start out by running Memtest86 and Prime95; run both the Blend and Small FFTs tests for Prime95.

RAM - Test with Memtest86+

http://www.sevenforums.com/tutorials...t-prime95.html

Install updated drivers for the following:
Code:
b57nd60x.sys Sun Apr 26 07:15:34 2009 (49F44256) - Broadcom Ethernet - Broadcom.com - Ethernet NIC NetLink Driver Downloads
igdkmd32.sys Wed May 06 14:13:40 2009 (4A01D354) - Intel Graphics - http://downloadcenter.intel.com/defa...me_downloadctr
netw5v32.sys Thu Mar 26 12:10:37 2009 (49CBA8FD) - Intel WiFi - http://downloadcenter.intel.com/defa...me_downloadctr
If the BSODs persist, upload a full BSOD report:

http://www.sevenforums.com/crashes-d...tructions.html

...Summary of the dumps:

Code:

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Wed Dec 29 03:56:09.897 2010 (UTC - 5:00)
System Uptime: 0 days 0:00:16.770
*** WARNING: Unable to verify timestamp for drmk.sys
*** ERROR: Module load completed but symbols could not be loaded for drmk.sys
*** WARNING: Unable to verify timestamp for VSTAZL3.SYS
*** ERROR: Module load completed but symbols could not be loaded for VSTAZL3.SYS
*** WARNING: Unable to verify timestamp for VSTDPV3.SYS
*** ERROR: Module load completed but symbols could not be loaded for VSTDPV3.SYS
*** WARNING: Unable to verify timestamp for VSTCNXT3.SYS
*** ERROR: Module load completed but symbols could not be loaded for VSTCNXT3.SYS
*** WARNING: Unable to verify timestamp for amdxata.sys
***... Read more

9 more replies
Answer Match 44.94%

I'm on a 32 bit Windows 7 Home premium System and my pc has been rebooting once a day on it's own showing a BSOD then says windows has recovered from a serious error when logged in (see below).

I have attached a DUMP file in rar format can someone analyze it and please help?




Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: a
BCP1: 00000028
BCP2: 00000002
BCP3: 00000001
BCP4: 82E430E9
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\120110-35583-01.dmp
C:\Users\MasterMTG\AppData\Local\Temp\WER-52104-0.sysdata.xml
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BSOD & Dump File please help

Hi, mastermtg, and welcome to the the forum. Sorry you are having a problem. Please read this thread, follow the instructions and post back. We will be glad to help you. We need system information that dumps do not give us.

http://www.sevenforums.com/crashes-d...tructions.html

9 more replies
Answer Match 44.94%

Hi, I am introduce myself on this forum.

I would like to know what cause the crash of my windows 7 system with a "lovely" blue screen.

Attached dump file.

Thanks in advance!

A:Windows 7 dump file

  
Quote: Originally Posted by salterpower


Hi, I am introduce myself on this forum.

I would like to know what cause the crash of my windows 7 system with a "lovely" blue screen.

Attached dump file.

Thanks in advance!


hi and welcome

this crash was probably caused by Gigabyte's Dynamic Energy Saver Advanced program. ... gdrv.sys

I would update the bios.
run a system file check to verify and repair system files to do that
type cmd in search>right click and run as admin>sfc /scannow

If you overclocking stop

Hope this helps
Ken

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\010210-17160-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c1d000 PsLoadedModuleList = 0xfffff800`02e5ae50
Debug session time: Sat Jan 2 03:22:18.523 2010 (GMT-5)
System Uptime: 0 days 16:52:19.256
Loading Kernel Symbols
...............................................................
................................................................
........................................
Loa... Read more

2 more replies
Answer Match 44.94%

My computer crashed overnight and I have a dmp file. I cannot read it -- and I am not PC savvy enough to work it out with the SDK program, although I did try. The file is attached, zipped. Thank you for any insights!

A:Help reading dump file

Dump file blames Broadcom NetLink Gigabit Ethernet device
Update the driver
Broadcom.com - Ethernet NIC Driver Downloads


Code:
ugCheck 9F, {3, fffffa8006193060, fffff80000b9c518, fffffa8008d66be0}

*** WARNING: Unable to verify timestamp for k57nd60a.sys
*** ERROR: Module load completed but symbols could not be loaded for k57nd60a.sys
Probably caused by : k57nd60a.sys

2 more replies
Answer Match 44.94%

Why can't I open these files: Memory Dump file and Minidump?

Any easy way to open them?

A:Memory Dump file

Hi
You need special software, It is calles windbg.
Download and Install Debugging Tools for Windows But
All you have to do is give us your BSOD files and we help solve your problem

5 more replies
Answer Match 44.94%

Hi,

here is my dump file analysis report. Please tell me what is the problem.


*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8007d4b028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b625a000, High order 32-bits of the MCi_STATUS value.
Arg4: 00000000ad000135, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_AuthenticAMD

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: plugin-contain

CURRENT_IRQL: f

STACK_TEXT:
fffff880`02fddb08 fffff800`02c12a3b : 00000000`00000124 00000000`00000000 fffffa80`07d4b028 00000000`b625a000 : nt!KeBugCheckEx
fffff880`02fddb10 fffff800`02dd6513 : 00000000`00000001 fffffa80`080e7290 00000000`00000000 fffffa80`080e72e0 : hal!HalBugCheckSystem+0x1e3
fffff880`02fddb50 fffff800`02c12... Read more

A:Please analyze my dump file.

Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

4 more replies
Answer Match 44.94%

A friend has a new DELL laptop [sorry don't know which one] with "Vista" OS. Frontiernet.net recently installed DSL in her area. She signed up and is now online with DSL. Problem is: Every time she shuts the computer down, it dumps her DSL and she has to re-install it . Frontier has came back a couple of times and did a checkup and re-install, but it doesn't appear to be their problem. I checked her router [ Siemens ] and it loads up quickly and correctly. I haven't had time to go into her DSL files. If someone knows the answer it will save me a lot of time.
Thanks, caseybru

A:DSL file dump on shutdown

Be careful with the word "dump" especially followed by on shutdown, lol. There are many memory "dumps" on windows computers. You are saying the software for dsl just deletes itself, right?

If you are using ethernet than you likely don't even need software. Plug in and go!

3 more replies
Answer Match 44.94%

Getting the Watchdog violation (that is the .dmp file)

https://www.dropbox.com/sh/0qi6gaehqgyalv4/kYc0mVf5AH

A:Can someone interpret this dump file

Originally Posted by regnaston


Getting the Watchdog violation (that is the .dmp file)

https://www.dropbox.com/sh/0qi6gaehqgyalv4/kYc0mVf5AH



All the dump files mention hal.dll as the culprit which seems to be involved with the windows boot process , it could be a hardware problem with the boot drive (possible but unlikely), issues with the boot order of your hard drives in the BIOS, did you add a new drive recently?.

Tried booting from cd and trying automatic repair?

Check from the command prompt using

chkdsk c: /r /f
sfc scannow

If none of the above apply then hal.dll has become corrupted, if this is the case then you will probably need to restore/refresh/reset your windows 8 install from the original installation disk.

3 more replies
Answer Match 44.94%

will somebody please take a look at this dump file ive had 2 the same. ive had a look with windbg but im a noob , only thing i can make out is memory_corruption so i ran memtest offline all night last night and have no errors , im assuming it means something else.

I know there are some clever types around who can give me a shove in the right direction , i have an overclocked Vista 64 install and in the years ive had it this is my very first bluescreen incident so im keen to see whats up

Thank you in advance for any help , i very much appreciate your time

A:memory dump file

Originally Posted by archie123


will somebody please take a look at this dump file ive had 2 the same. ive had a look with windbg but im a noob , only thing i can make out is memory_corruption so i ran memtest offline all night last night and have no errors , im assuming it means something else.

I know there are some clever types around who can give me a shove in the right direction , i have an overclocked Vista 64 install and in the years ive had it this is my very first bluescreen incident so im keen to see whats up

Thank you in advance for any help , i very much appreciate your time



Low-level memory structures have been corrupted, either by an errant driver or by misbehaving hardware (overclocking, under-cooling, outright damage...). If it's a driver, it'll be one of these:

start end module name
fffffa60`007e8000 fffffa60`007fc000 LMouFilt Fri Dec 19 18:38:09 2008 (494B4F61)
fffffa60`009dd000 fffffa60`00a00000 ehdrv Thu Apr 09 23:01:35 2009 (49DDF1AF)
fffffa60`00b87000 fffffa60`00b95000 ATITool64 Thu Aug 09 02:42:26 2007 (46B9F272)
fffffa60`0240a000 fffffa60`02d79500 nvlddmkm Sat Mar 28 05:35:54 2009 (49CD1C8A)
fffffa60`02d7a000 fffffa60`02d7b400 nvBridge Sat Mar 28 04:51:20 2009 (49CD1218)
fffffa60`02d7c000 fffffa60`02de3000 netr6164 Thu Nov 27 00:51:16 2008 (492D5454)
fffffa60`02f84000 fffffa60`02f95000 Rtlh64 Tue Sep 26 21:20:23 2006 (45190CF7)
fffffa60`04004000 fffffa60`0416df80 RTKVHD64 Thu Jul 24 20:05:39 2008 (488853F3)
fffffa60`... Read more

more replies
Answer Match 44.94%

C:\Program Files\Support Tools>dumpchk c:\mini052110-03.dmp
Loading dump file c:\mini052110-03.dmp
----- 32 bit Kernel Mini Dump Analysis

DUMP_HEADER32:
MajorVersion 0000000f
MinorVersion 00000a28
DirectoryTableBase 00707000
PfnDataBase 81c46000
PsLoadedModuleList 8055d720
PsActiveProcessHead 805638b8
MachineImageType 0000014c
NumberProcessors 00000002
BugCheckCode 100000d1
BugCheckParameter1 00000006
BugCheckParameter2 00000002
BugCheckParameter3 00000000
BugCheckParameter4 b9e367d4
PaeEnabled 00000001
KdDebuggerDataBlock 8054d2e0
MiniDumpFields 00000dff

TRIAGE_DUMP32:
ServicePackBuild 00000300
SizeOfDump 00010000
ValidOffset 0000fffc
ContextOffset 00000320
ExceptionOffset 000007d0
MmOffset 00001068
UnloadedDriversOffset 000010a0
PrcbOffset 00001878
ProcessOffset 000024c8
ThreadOffset 00002728
CallStackOffset 00002980
SizeOfCallStack 00000534
DriverListOffset 00003148
DriverCount 0000007b
StringPoolOffset 000055d0
StringPoolSize 00001110
BrokenDriverOffset 00000000
TriageOptions 00000041
TopOfStack 805511cc
DebuggerDataOffset 00002eb8
DebuggerDataSize 00000290
DataBlocksOffset 000066e0
DataBlocksCount 00000004


Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible

Kernel base = 0x... Read more

A:Who can read a dump file?

Hello Bry, not really up on this kind of thing but I have access to a beginners guide so would like to have a go but I think you need to zip the dump in its original ( .dmp ) format and then post it.

9 more replies
Answer Match 44.94%

Hi,

Got windows 7 pro 64 bit PC which has been crashing and getting BSOD regularly. Have come to a bit of a brick wall with what to try next. Replaced HDD, graphics card and PSU. Unplugged CD-Rom. Replaced ATI drivers, chipset drivers, all MB drivers. Bios is up to date with nothing overclocked. Run Memtest. All this and still the same problem.

When it Blue screens i get the 0x0124 so not much help there. If someone could look at these dump files and shed any light or what to try next much appreciated.

Example 1:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80079d3028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000f2000000, High order 32-bits of the MCi_STATUS value.
Arg4: 000000000020008f, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------


BUGC... Read more

A:Help with Dump file 0x0124

Hi B3njamin91,

These 'Mini-dumps' may not give conclusive information; need to have a look at 'System Logs' for more information on any possible 'Hardware failure / software corruption / bad or outdated drivers. Please download and run the 'SF_Diagnostic_Tool.exe file' as suggested in the tutorial link for better 'BSOD analysis': Blue Screen of Death (BSOD) Posting Instructions

After download, click 'Grab all' to capture the Mini-Dump, Event Logs, Update Logs, Driver List, System Information and MGDiag reports. Apart from the 'Mini dump' the information in these files is vital for investigation.

In the mean while, try to uninstall 'Sophos Anti-Virus' from the system; you may use 'Microsoft Security Essentials' to see if that helps. Also restore 'BIOS' to 'default settings' and check results.

Do reply with the information; would be glad to assist.

3 more replies
Answer Match 44.94%

Hey everyone so I've been having some issues lately with my pc bluescreening randomly. I'm running Windows 7 Ultimate Sp1 x32 and can't seem to figure out what exactly is the issue with my computer. I've run chkdsk and have found no bad sectors

So I attached dump file and was wondering if someone could read it for me and possibly point me in the right direction? thanks in advance

A:Can someone please read my Dump file?

You've got an hardware issue here.. You should try
-MEMTEST
-PRIME95
-SEAGATE TOOLS

Hope this gets you going.

6 more replies
Answer Match 44.94%

guys, i get a BSOD intermittently, sometimes it's at idle, sometimes when i'm gaming.

Running Win & home edition, i ran the windows memory test but no errors were detected.

? OS - Windows 7
? x86 x64
? What was original installed OS on system?
? Is the OS an OEM version : came installed
? Age of system 1 year
? Age of OS installation - no reinstall of os
? CPU Intel Bloomfield
? Video Card ATI 5870HD
? MotherBoard Foxconn Dell mobo
? Power Supply Dell 650Watt psu
Dump file in text format:




Code:


Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\~Documents\061911-13478-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: srv*DownstreamStore*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`0205a000 PsLoadedModuleList = 0xfffff800`0229f650
Debug session time: Sun Jun 19 18:57:14.572 2011 (UTC + 8:00... Read more

A:124 BSOD with dump file

The info suggests a PCIe card error.

0x124 = WHEA = Machine Check Exception; hardware failure

Info on 0x124 - http://www.sevenforums.com/crash-loc...-what-try.html

Regards. . .

jcgriff2

`

3 more replies
Answer Match 44.94%

System is one year old and OS was installed then.
BSOD was before login and after login, sometimes when mouse is over favorites I get them also.
Didn't have any for awhile and this is the first time in a long time a dmp file was produced.
For weeks I have nice performance, no troubles and it seems fixed.
Really started months ago, I think at the time I changed from IDE to AHCI but it could be a coincidence.

A few weeks ago I ran memtest86+ and got errors, ran each stick and no errors, changed slots and no errors. Ran both sticks again and no errors(about 4 passes).

Ran sfc scannow and had errors, but ran it again and had no more errors.

Seems only to happen when running IE9(32bit) but it's almost always open.
Got one when the computer was doing nothing, I wasn't there.

Files are attached, if you need anything else let me know.

A:BSOD With Dump file.

  
Quote: Originally Posted by George1


System is one year old and OS was installed then.
BSOD was before login and after login, sometimes when mouse is over favorites I get them also.
Didn't have any for awhile and this is the first time in a long time a dmp file was produced.
For weeks I have nice performance, no troubles and it seems fixed.
Really started months ago, I think at the time I changed from IDE to AHCI but it could be a coincidence.

A few weeks ago I ran memtest86+ and got errors, ran each stick and no errors, changed slots and no errors. Ran both sticks again and no errors(about 4 passes).

Ran sfc scannow and had errors, but ran it again and had no more errors.

Seems only to happen when running IE9(32bit) but it's almost always open.
Got one when the computer was doing nothing, I wasn't there.

Files are attached, if you need anything else let me know.


Hi George1 welcome to SF

Please update your Realtek Ethernet NIC software/driver http://www.realtek.com.tw/downloads/...&GetDown=false

----------
Post back with any results.

6 more replies
Answer Match 44.94%

afternoon.. i've desperate to solve my problem.. i got this problem just 2 days ago after i played dota 2 and open the facebook.. firstly i got BSOD and message like this "Kernel_data_inpage_error" then i check using CHKDSK.. but can't solved at all... after a few times i operated my laptop.. suddenly i got new BSOD message, it's about something called dump, memory dump, minidump ... i've tried to scan using some tools but can't help it... i post this thread hope can someone help my problem... this is the dump file i mention about.. thanks for the attention

A:BSOD and got dump file

Please follow these instructions: Using Driver Verifier to identify issues with Drivers - Windows 7 Help Forums

4 more replies
Answer Match 44.94%

I recently put together a machine and for about the first 4-5 days I had 0 problems. Everything was running flawlessly.

However the last 3 days my machine is giving me fits when I try and play Warhammer Online. I went as far as to reformat thinking I had patched something I didn't want too. But that hasn't fixed my problem. I am at a loss here...

After about 10 minutes playing Warhammer Online my system completely locks up. I have to power it off and back on. However, only one of the many times this happened have I received anything to help me debug this.

I have run Prime95, FurMark, Memtest86 with absolutely no problems. Also I have taken out my sound card, unplugged my 2nd monitor, and reduced my RAM to 4GB, but nothing seems to resolve my issue. :(

Anyway here is what I am getting from the WinDbg


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.402 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Johnny Jones\AppData\Local\Temp\WERC6F6.tmp\Mini022509-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Invalid directory table base value 0x0
Mini Kernel Dump does not have process information
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6001.18145... Read more

A:Help me understand this dump file?

SOFTWARE:

- Mythic Warhammer Online: http://www.warhammeronline.com/
- See first post for error details

DRIVERS PROBLEMS:

- Not sure if it's a driver problem, hoping we can figure it out!

OPERATING SYSTEM (OS):

- Windows Vista x64 w/ SP1
- See first post for error details
- This is a new system build, worked fine for a few days then just started crashing like mad..
- Attached screenshot for list of programs installed.

HARDWARE:

- Custom Build
- Not sure which hardware piece is giving me the problem.
- Components:

Asus Rampage Extreme II Motherboard
Intel i7 920 Processor
OCZ Triple Buffer Memory: OCZ3P1600LB6GK (Only have 4GB installed the 3rd appears to be bad.)
eVGA GTX 285 1GB Graphics Card
On Board Sound
Samsung 1TB 7200RPM Sata Hard Drive
Liquid Cooled w/ CoolerMaster Aquagate Max
Corsair HX1000W PSU

6 more replies
Answer Match 44.94%

After installing the .net Framework 3.5 sp1, I ended up with a long list of loose files in my appdata-> local folder.

They appear to be logs - I was wondering if it's okay to delete these? They all start with "dd_".

More replies
Answer Match 44.94%

Hi Guys/Gals,

Hoping someone can help me out. I've been experiencing a number of BSODs and was looking for someone to have a look at the dump files to determine what is causing the problem.

Running Windows 7

Any help would be gretly appreciated.

Cheers
 

More replies
Answer Match 44.94%

ANd also explain how to read this ( what program is needed ) . I just see random stuff in the dmp file ..

Thanks a million ..

A:Can you please analyze this dump file .

It's a stop 0x116. More info on that type of crash:

http://www.sevenforums.com/crashes-d...tml#post280172

As far as "reading" the dump files is concerned:

http://www.sevenforums.com/crash-loc...ing-tools.html

2 more replies
Answer Match 44.94%

My computer just blacked out a bit before recovering and seeing a "Display Driver Nvidia 3##.## has stopped responding and successfully recovered" message.

It has been a year ever since a big wave of black screen errors plaguing my computer and now it has happened again, I am a little worried about its return.

A:Need help with analysing this dump file

Hi Sethmetal Kukri,

It is the 0x117(VIDEO_TDR_TIMEOUT_DETECTED), a graphical BSOD.

This means that the drivers of the graphics card have failed to respond between a certain time amount.
This could be caused by the drivers, a damaged GPU, dust and not properly seated.
At the moment I suspect this is a driver issue as the date of the flagged driver is from last year.

Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Nvidia


Code:
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
2: kd> lmvm nvlddmkm
start end module name
fffff880`0f2fc000 fffff880`0ff8a000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Wed Jul 02 19:42:02 2014 (53B4446A)
CheckSum: 00C4C7C9
ImageSize: 00C8E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

1 more replies
Answer Match 44.94%

Ok people, I need your help once more!

I'm trying to pull some information regarding a startup stop error (blue screen). Since I haven't written down the actual stop error I was hoping that this info can be found at the dump file. The problem is that I cannot locate this file (I'm using debugging tools for windows x86 November version). It simply doesn't exists although my system is set up to create a small memory dump at the root directory.

-What shall I do in order to ensure that a dump file is created?

-Are there any other ways to pull out BSOD information without actually writing down this info myself?
 

A:Need some help understanding the XP dump file

7 more replies
Answer Match 44.94%

Whenever I play a game on my PC it restarts randomly, without any warning. I've attached the .dmp file from the last incident. Any help would be appreciated. Thank you.

A:Crash Dump file.

Hi.

Scroll to the top of the page and see the notice?

1 more replies
Answer Match 44.94%

can anyone translate this for me?


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Michae\Desktop\030910-26609-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.09... Read more

A:Reading a dump file

zip the file up first then attach it to your next post

5 more replies
Answer Match 44.94%

I zipped my dump file from 500 mb down to 130 mb but it still wont let me upload it? Any tricks for me sf? Thank you!

A:Help uploading a dump file

  
Quote: Originally Posted by suprattalljdm


I zipped my dump file from 500 mb down to 130 mb but it still wont let me upload it? Any tricks for me sf? Thank you!



The limit for upload is 8 Mb. You could upload it to a service like rapidshare and give us the link. If there are more than 1 dmp in there just send us the 3 most recent
Ken

9 more replies
Answer Match 44.94%

If someone could please read the dump file as I am having a hard time doing so. It started recently after a new mouse install but I have uninstalled that and it still is doing it. If you could read the dump and get back to me that would be greatly appreciated.

thanks,
Jay bob
[email protected]
 

A:Bluescreen and dump file

Hi jaybob275,


The culprit is faulty memory. You can run memtest to stress the ram. If memtest reports the ram is faulty, ram is bad. However Memtest is not a perfect tool to test the memory as some faulty ram can pass memtest.

Suggestion
1. Check the temperature of the CPU and make sure that it is not overheat (ie temperature < 60C)
Make sure that the CPU fan works properly
2. Reseat the memory stick to another memory slot. Reseat video card as well.
3. Downclock the ram. Check to default setting if you video card is overclocked.
4. Clean the dust inside the computer case
5. Make sure that the ram is compatible to the motherboard
6. Check the bios setting about memory timing and make sure that it is on
For example : DIMM1 and DIMM2 do not have the same timing.
DIMM1: Corsair CMX512-3200C2 512 MB PC3200 DDR SDRAM (2.5-3-3-8 @ 200 MHz) (2.0-3-3-7 @ 166 MHz)
DIMM2: Corsair CMX512-3200C2 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz)
DIMM3: Corsair CMX512-3200C2 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz)
7. Make sure that your PSU have adequate power to drive all the hardware including USB devices
8. Upgrade BIOS and make sure that the motherboard has no leaking capacitor

If it still crashes, diagnostic which memory stick is faulty
1. Take out one memory stick. If windows does not crash, the removed memory stick is faulty.


Your debug report
Mini010106-01.dmp BugCheck 1000000A, {0, 1c, 1, 804e1bf8}
Owning Process 8... Read more

2 more replies
Answer Match 44.94%

My computer has developed a liking for BSoD.

I have tried to understand the dmp file but can't make any sense (probably because I'm thick and it doesn't say something like "your graphics card done it").

It consistantly crashes when using Photoshop and www.dell.co.uk

I can't remember when it started but I have had hardware problems (crashed out raid array, DVD failure & psu overload) and have added new items (third hard disk to raid array, DVD, psu, new processor (+1700 to +2100), one memory module (512mb pc133)). The BSoD did not occurr until after these items were added. I'm guessing that the 250W psu overheated once the new hard disk, processor & memory were added. The overheating psu damaged the DVD drive that was squeezed right on top of the psu. I can run system burn in tests for +70hours with out a fault occurring.

I have included the Dr watson log and the dump file can be found @ http://cid-85189d104fa01483.skydrive.live.com/self.aspx/Public/dump.zip

If anyone can help I would much appreciate it.
 

A:Understanding dump file

8 more replies
Answer Match 44.94%

Hello, my computer has been randomly crashing, I have tried everything to get a dump file, so that i could analyze it and then try to fix it, but Windows 7 will not leave one. Does anyone have any ideas what might be the problem? (I am running Windows 7 Professional)

A:Crashes with no dump file.

Have you checked in C:\Windows\Minidump for files?
Have you checked in C:\Windows for a file named MEMORY.DMP?
Have you checked to be sure that your pagefile is at least 400 mb larger than your installed RAM?
Have you checked to be sure that your pagefile is located on the same drive as your OS?
Have you checked to be sure that you have at least 15% free space on the drive that holds your OS and pagefile?

9 more replies
Answer Match 44.94%

Hey all,
I've been diagnosing this system I just built for over a week now, and have replaced/rebuilt everything I can think of. I ran diagnostics, i've tested memory, etc. Cannot find the problem. I've made it better, and the system started crashing every hour or so. Now it is crashing only every 5 hours or so. This makes testing extremely long and tedious. Completely new build. I've crashed while idle in desktop. Crashed while surfing the internet. Crashed while playing games. No dump file being created but i've gotten many errors. At one point my motherboard wouldn't save time. Motherboard detects ram default as 1333, and i've left it there and changed it to 1600. Whatever i've changed I have gotten it to stop happening as often, but it still happens. Nothing in event viewer I can see wrong. I've let driver verifier run, but get no errors and the same thing happens whether on or off. It happens about every 5-6 hours. What's extremely weird is the system can crash if I have played on it for about 3 hours. Shut it down. Turn it back on, and will still crash in about 1-3 hours. At this point I am just frustrated and annoyed with it. Mem test passes after about 10 hours with 6 passes. Single memory sticks still crash. No overclocking done. At this point if it is hardware, it's either PSU, CPU, or Motherboard, but I don't have any additional of those to test.

Errors:

*** Hardware malfunction
Call your hardware vendor for support
NMI: Channel Check / IOCHK
*** The syst... Read more

A:BSOD - No dump file

Bump - No one wants to take a go at it? :)

7 more replies
Answer Match 44.94%

Hi everybody and nice to join your Forum.
Question: How can I find (memory dump files) and delete them?
However, should I delete them?
Thanks...
 

A:Memory Dump File(s)

Welcome to the forum.

What OS are you using ? Memory dumps are just copies of what ever was in your RAM at the time of a crash. Unless you want to read them to see the cause of the crash, then yes it is fine to delete them

 

3 more replies
Answer Match 44.94%

I am trying to upload a dump file i made when spore crashed but i keep getting a timed out ? The connection to the server was reset while the page was loading.

any clue ?

Thanks

A:uploading a dump file win-zip

Hi Niklas,

Dump files aren't on the list of file types you can upload, so try right clicking on it and sending it to a compressed zipped file, then uploading the zip file.

9 more replies
Answer Match 44.94%

Hi,
 
Need someone's expertise in analyzing the attached dump files. Been encountering it for almost a year now and am already stumped in identifying the cause. Can get 1-5+ BSODs everyday and the bugstrings always changes. I thought the majority of the BSODs were storage/memory related but i've already replaced an ageing HDD and RAM passed MemTest86+.
 
Already stress tested CPU with Prime95 w/o issues. GPU tested with Furmark and other benchmarking utilities while monitoring temps but still am unable to identify culprit. I've also updated all hardware with latest drivers directly from their manufacturers. BIOS has the last update as well. I've recently been unable to view event viewer as well so I am unable to generate a perfmon report. SFC scans ok too. I'm also now on my 5th antivirus software in case it is causing problems.
 
If only someone could direct me on what to fix as I am all out of ideas now. Thanks in advance.
 
 
System:
 
Windows 10 Home
ASrock mobo | i7 2600 | 2x4 DDR3 | Radeon 6950 2GB

A:Dump File Analysis Help

Please understand that diagnostics are software responses to hardware problems.  As such, they may not be 100% correct.For example, I've seen dead/dying hard drives at work that passed the SMART analysis and passed the manufacturer's hard drive diagnostics.I've also seen memory pass MemTest86+, and then fail when testing with Prime95's Blend test.  It's not a great stretch to theorize that there may be other hardware conditions that neither of these programs can spot. So, first I'd suggest running these free hardware diagnostics:  http://www.carrona.org/hwdiag.htmlFeel free to skip the tests that you've already run (as long as you've met or exceeded my suggestions). The systeminfo.txt report is missing from the uploads.  Please do this:systeminfo:Please open an elevated (Run as administrator) Command Prompt and type (or copy/paste) "systeminfo.exe >%USERPROFILE%\Desktop\systeminfo.txt" (without the quotes) and press Enter.  Then navigate to Desktop to retrieve the syteminfo.txt file.  If you have difficulties with making this work, please post back.  Then zip up the .txt file and upload/attach the .zip file with your next post. Your UEFI/BIOS (version P2.50) dates from 2012.  Please check at the manufacturer's website to see if there are any UEFI/BIOS updates available for your system.  If you are able to install the update through Windows (without booting from an external drive), then go ahead and update it.... Read more

0 more replies
Answer Match 44.94%

can someone check this dump file and tell me what caused it
 

A:can someone check this dump file

The log shows:
BugCheck 10000050, {e37833a0, 0, 8055059a, 1} PAGE_FAULT_IN_NONPAGED_AREA
PROCESS_NAME: avp.exe, Probably caused by : klif.sys

Both files are related to Kaspersky Internet Security Suite.
 

2 more replies
Answer Match 44.94%

For some reason, I can't get Windbg to work for me and its driving me nuts! >_<

Much appreciated!

My error:


Code:
DBGHELP: c:\symbols\ntkrnlmp.pdb\47F5C3BF9E0A493C9F63BB8F6413358B2\ntkrnlmp.pdb - file system or network error reading pdb
DBGHELP: ntkrnlmp.pdb - file not found
*** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlmp.exe -

A:Can someone please analyze this dump file?

volsnap.sys Volume Shadow Copy Driver.

HTML Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\x\Desktop\Dump\092111-44273-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`04e49000 PsLoadedModuleList = 0xfffff800`0508e670
Debug session time: Wed Sep 21 07:15:02.214 2011 (UTC + 3:00)
System Uptime: 1 days 0:09:10.167
Loading Kernel Symbols
...............................................................
................................................................
...................................................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging in... Read more

3 more replies
Answer Match 44.94%

hey guys, i been getting BSOD and getting fed up with it now. I have been looking everywhere about it and they ask me to read my dumpfile. well i would read it if i new what i was looking for but my computer skills are next to nothing. so pls help me and point me out to help fix my PC

Kind Regards
Ryan

A:can someone read my Dump file

Uninstall your current antivirus, it contributes to bsods. Use Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Help protect your PC with Microsoft Security Essentials
Malwarebytes Free



   Note
Do not start the trial version of MalwareBytes

Also take a look at: Good & Free System Security Combination
Virus Check:Make scans with these tools below:TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US
Online Virus Scanner Eset
Application conflict:Reduce the start-up items. This will help avoid software conflicts:Remove Startup Programs in Windows 7
Clean Startup in Windows 7
System File CheckerThe SFC /SCANNOW Command - System File Checker scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible. If you have modified your system files as in theming explorer/system files, running sfc /scannow will revert the system files to it's default state.Link to full tutorial: SFC /SCANNOW Command - System File Checker
Run Disk Check in Windows 7Run this on your Hard Drive(s). This will show you how to run Check Disk or chkdsk in Windows 7 to check a selected hard disk for file system errors and bad sectors on it. With both boxes checked for all HDDs and with Automatically fix file system error... Read more

1 more replies
Answer Match 44.94%

Well managed to come across this website thankfully so i hope someone can help... Been getting BSOD for about 2-3 months now it only ever seems to be when playing battlefield 3 and its not often its like one a month maybe not even that, im not a super tech on computers barely know anything so if you could just try to keep it simple would be much appreciated.
Gonna write my system specs just incase you need them.

GTX 295 @ 285.62 Drivers
P5P43TD
4gb Corsair 1333mhz
Q8300 2.5GHZ.

Recently overclocked my processor too 3.2 put coretemp on and my temps maximum and was 61 and i done a stress test at 100% load and wasnt going past 61 so i know it wasnt overheating maybe i done it wrong and done a bad overclock but then didnt think it would even boot?
Am thinking its to do with bad RAM

Anyway any advice would be much appreciated
Paul/Weeman

A:BSOD - Dump file HELP

For some reason cant seem to find anyway to do edit my post wanted to just add that i had just done the memory test the one on windows 7, and my results shown that nothing wrong with memory.

19 more replies
Answer Match 44.94%

I am running automation software instances simultaneously and it is causing the Multiple IRP error. Any help is greatly appreciated.

Thanks,

Dan

A:BSOD Need dump file help

danmkennedycx, Wht your dump files are saying is


Code:
Svk2pl64
start end module name
fffff800`d4cb9000 fffff800`d4cd9000 Svk2pl64 T (no symbols)
Loaded symbol image file: Svk2pl64.sys
Image path: \SystemRoot\system32\DRIVERS\Svk2pl64.sys
Image name: Svk2pl64.sys
Timestamp: Thu Apr 01 02:54:21 2010 (4BB4512D)
CheckSum: 0002627E
ImageSize: 00020000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Which is a Gigaware USB to Serial Cable


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
MULTIPLE_IRP_COMPLETE_REQUESTS (44)
A driver has requested that an IRP be completed (IoCompleteRequest()), but
the packet has already been completed. This is a tough bug to find because
the easiest case, a driver actually attempted to complete its own packet
twice, is generally not what happened. Rather, two separate drivers each
believe that they own the packet, and each attempts to complete it. The
first actually works, and the second fails. Tracking down which drivers
in the system actually did this is difficult, generally beca... Read more

3 more replies
Answer Match 44.94%

BSOD Dump File

A:BSOD Dump File

Memory corruption possibly caused by one of these old drivers.

Please update.

Code:
secdrv.SYS 9/13/2006 9:18:38 AM fffff880`06000000 fffff880`0600b000 0x0000b000 0x4508052e
lmimirr.sys 4/10/2007 6:32:45 PM
RaInfo.sys 1/4/2008 2:57:14 PM
LMIRfsDriver.sys 7/14/2008 12:26:56 PM
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


- - The most common drivers are listed on this page: Driver Reference Driver Reference
Driver Reference Table

1 more replies
Answer Match 44.52%

Hi all,

I looking for a free program that opens dmp files and tells you the most likely cause of the crash. Anyone know of a good app for this?

Thanks,

Dan
 

A:DMP (DUMP) file viewer program?

http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx

I found this site. Hope it helps. I have no idea how to use it though.
 

2 more replies
Answer Match 44.52%

First off I shall start with my computer specs:

CPU: Intel Core 2 Duo CPU E8400 @ 3.00GHz
Motherboard: Asus Striker Extreme
Memory: 4GB DDR2 Corsair Dominator Series
Graphics: ATI Radeon HD 5770
HDD: Dual striped WD Raptor 74gb 10,000RPM
Case: Antec 900 with Zalman heatsink
Additional: Creative Soundblaster Xtreme music PCI sound card
Operating System: Windows 7 Professional 32bit

I know a fair amount about computers and managing them, but before I go and spend loads of money I would like to run this problem by others.

While gaming and watching movies I continue to encounter BSOD that says nothing but "Hardware device has failed. Please contact your hardware manufacturer"

Typically upon recovering from a BSOD I would decode a dmp file which my computer has recorded, but for some reason my computer is not recording any dump files at all. I have adjusted the dump settings from small dump, to kernel dumps, and yet still nothing. I have even adjusted the directories to custom ones. The BSOD itself only says what was previously stated and nothing more. I am at a loss in finding what is causing this issue and am in dire need of some assistance if anyone has any.

These crashes do not occur while my computer is just idling. These crashes only seem to occur when: playing games, watching movies, or even just on youtube.

I do not know if this is the correct forum for this problem, but I have never had a problem with my computer recording dump files bef... Read more

A:[SOLVED] BSOD with no dump file.

Hi,

Please follow these instructions: http://www.techsupportforum.com/f217...ml#post2545708

Attach the .zip file to your next post in this thread.

Regards,
Reventon

19 more replies
Answer Match 44.52%

I own a win 8.1 dell laptop, thing just got a BSOD

I used the online OSR analysis to analyze my dump file


Code:
Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

BUGCHECK_STR: 0x139

PROCESS_NAME: pcdrcui.exe

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff801b755a3e9 to fffff801b754e8a0

STACK_TEXT:
ffffd000`2688fb58 fffff801`b755a3e9 : 00000000`00000139 00000000`00000003 ffffd000`2688fe80 ffffd000`2688fdd8 : nt!KeBugCheckEx
ffffd000`2688fb60 fffff801`b755a710 : 00000000`00000000 fffff801`b758b91b ffffe001`893dcef0 ffffd000`2688fdb0 : nt!KiBugCheckDispatch+0x69
ffffd000`2688fca0 fffff801`b7559934 : ffffe001`8c0d6080 870a7945`1aa23400 00000000`00000000 fffff801`b758b91b : nt!KiFastFailDispatch+0xd0
ffffd000`2688fe80 fffff801`b7580697 : 00000000`00000002 ffffe001`8ad199c0 00000000`00000000 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`26890010 fffff801`c5afc426 : ffffe001`8ad199b0 ffffe001`8d6a9ac0 ffffe001`8cd73010 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x218d7
ffffd000`26890040 ffffe001`8ad199b0 : ffffe001`8d6a9ac0 ffffe001`8cd73010 00000000`00000000 ffffe001`8ad199b0 : mfeavfk+0x18426
ffffd000`26890048 ffffe001`8d6a9ac0 : ffffe001`8cd73010 00000000`00000000 ffffe001`8ad199b0 fffff801`c5afb385 : 0xffffe001`8ad199b0
ffffd000`26890050 ffffe001`8cd73010 : 00000000`00000000 ffffe001`8ad199b0... Read more

More replies
Answer Match 44.52%

Hello,

I have been having a very strange problem since a few weeks. I am developing a driver, and fatally got a few blue screens here and there. However, I noticed that since a few weeks the blue screens don't give a dump file anymore, despite the fact that the dump seems to be done (says it begins physical dump on disk, counts to 100, says the dump has been written, etc). Of course, I didn't touch the dump settings. I have checked everything, including the following:
- Checked that the dump settings are correct (*many* times) , tried both Small memory dump and Kernel memory dump, checked paths of course. Full memory isn't available, probably because I have more than 2Gb of RAM.
- Checked that pagefile.sys is on the boot partition (with OS). I have a single drive with a single partition anyway.
- Checked that pagefile.sys is more than physical RAM. RAM is 2,44 Gb , pagefile.sys is 2,562 Gb .
- Checked that page file is system managed. It is, but I tried to set values by hand too, without results.
- Checked that WER service is set to manual, or so it is said on various forums I visited. I tested with setting it to automatic too, just in case.
- Checked that there is enough room on the disk (12.9 Gb free out of 39.8 Gb).

I also checked a few other things without remembering which ones exactly, I have been very careful to set them back to previous values, especially the ones I was not sure about (such as WER for example). According to the last modified date of the directory C:... Read more

A:Blue screen and no dump file

If you are not getting crash dumps on BSOD, follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

After the next BSOD, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump.

3 more replies
Answer Match 44.52%

Hi, my month old Dell with Windows 7 Home Premium 64 bit had been running fine. Today I came home and my hard drives could not be recognized and would not boot. Tried fiddling with Bios to no avail and reset the Bios to defaults. Finally unhooked the SATA drive that is the backup and the computer rebooted fine into both safe mode then "regular" mode.

Additional Information - The backup hard drive is a Seagate 750 GB drive with Windows XP on it. It used to be my main system until I had repeated BSOD issue that could not be fixed, hence the new Win 7 Dell. I plugged it in as a secondary drive, Win 7 auto ran a chkdsk on it, fixed errors, and the system had been running stable for about a month with both drives connected.

I have uploaded the dump file and am asking for any assistance in fixing the issue. Thank you!

A:ntsokrnl.exe issue and dump file

  
Quote: Originally Posted by snapaxp


Hi, my month old Dell with Windows 7 Home Premium 64 bit had been running fine. Today I came home and my hard drives could not be recognized and would not boot. Tried fiddling with Bios to no avail and reset the Bios to defaults. Finally unhooked the SATA drive that is the backup and the computer rebooted fine into both safe mode then "regular" mode.

Additional Information - The backup hard drive is a Seagate 750 GB drive with Windows XP on it. It used to be my main system until I had repeated BSOD issue that could not be fixed, hence the new Win 7 Dell. I plugged it in as a secondary drive, Win 7 auto ran a chkdsk on it, fixed errors, and the system had been running stable for about a month with both drives connected.

I have uploaded the dump file and am asking for any assistance in fixing the issue. Thank you!



Momory corruption caused by either Adobe distiller, or avast.
I would

1-remove avast and replace with Microsoft security essentials.
http://files.avast.com/files/eng/aswclear5.exe

http://www.microsoft.com/security_essentials/

2-re-install or remove distiller (at least to test)
3- run memtest to check the memory.

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program.

Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a b... Read more

1 more replies
Answer Match 44.52%

Greetings,

Ordered the boss a spiffy new Dell laptop. It is crashing to a blue screen every so often for no discernable reason. Applied basic fixes, all I have done is prolong the time between blue screens. Please take a look at the debugging log and let me know if you can help. Thanks.

Dell Studio XPS
Intel Core 2 Duo T9600 @ 2.8 GHz
8 GB RAM
64 Bit Windows Vista Ultimate
Microsoft ® Windows Debugger Version 6.11.0001.404 AMD64
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\Mini082409-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

WARNING: Whitespace at end of path element
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols

Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6001.22389.amd64fre.vistasp1_ldr.090302-1506
Machine Name:
Kernel base = 0xfffff800`01c1b000 PsLoadedModuleList = 0xfffff800`01de0db0
Debug session time: Mon Aug 24 08:48:55.360 2009 (GMT-5)
System Uptime: 3 days 18:24:05.738
Loading Kernel Symbols
...............................................................
................................................................
..........................................
Loading User Symbols
Loading unloaded module list
..................................................
***********... Read more

More replies
Answer Match 44.52%

I don't know how to analyze these on my own, and I'm hoping it's a simple fix, just started today. If someone could please analyze my dump file I would be very grateful!

110811-17004-01 - Copy.zip

A:BSOD Dump file, thanks in advance

Crashes caused by DirectX/display card drivers or the display card itself. For further help, please follow the blue screen instructions.http://www.techsupportforum.com/foru...ta-452654.html

-----

1 more replies
Answer Match 44.52%

Starting today, I'm getting a BSOD running Windows 7. I have made no changes to drivers/hardware, etc. for months. I was on the computer for a few hours today, then I got the BSOD. It doesn't all of the sudden go to BSOD, it will lock up, while still having mouse movement, then sometimes come back for a second or two, then most of the time show my desktop background (just the background), then BSOD. Once it crashes I have to shut down my computer for 30 seconds or so then start up again. If I try to boot up right away it will give me the "reboot and select proper boot device...." message, and will continue to do so until I shutdown for a short period. It crashes everytime within 3-5 minutes of the computer booting up. No dump files are being created, and yes I have done all of things you are going to ask (the file is setup to be created properly in settings, and my page file is enough, 8 gb with 8 gb of ram, and error reporting services are enabled). When I get the BSOD, it says collecting data, initializing disk, but then never gets passed that. This leads me to believe the BSOD is related to the hard drive (an SSD), as it looks like it can't initialize the disk to write the dump file to it. Also, on one occurrence I was in My Computer when the crash started and I noticed my hard drive disappeared (I believe my DVD drive was there though). I have changed the SATA cable, switched SATA ports, and still no luck. There are also no events in event viewer ar... Read more

A:BSOD 0xF4 with no dump file

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.

NOTE: Please provide the following information for a more detailed response: http://www.techsupportforum.com/foru...ta-452654.html
Your pagefile is not the correct size to capture memory dumps. An 8 gB pagefile can't capture 8gB of RAM - there is additional overhead required. The pagefile should be at least 8.5 gB in size.

The pagefile must be on the same drive as the OS (there are ways around this - but it involves editing the registry).

IMO these are the significant observations:

Quote:




If I try to boot up right away it will give me the "reboot and select proper boot device...." message





Quote:




Also, on one occurrence I was in My Computer when the crash started and I noticed my hard drive disappeared




Also, we have had numerous problems with SSD's. So many that I'm holding off on getting one until the technology matures enough to make them reliable enough for daily use.

The first step with any SSD issue (IME) is to ensure that you have the latest firmware installed on the drive. I would also suggest a hard drive test if your SSD manufacturer offers one. Here's a free one, but I have no experience with it: Crystal Dew World

Another thing to try is reinstalling your chipset and storage drivers. Even the most updated versions can get corrupted. Also, make s... Read more

8 more replies
Answer Match 44.52%

I am getting intermittent BSODs, when I try and upload the dmp. file it says that I need administrator permission, but, I am logged in as admin. Can someone give me a hand please

A:Problem when trying to upload dump file

  
Quote: Originally Posted by the514


I am getting intermittent BSODs, when I try and upload the dmp. file it says that I need administrator permission, but, I am logged in as admin. Can someone give me a hand please


drag the DMP to desktop zip and upload from there


To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been made.

1 more replies
Answer Match 44.52%

Hi, I am currently running Outlook PST File Repair on a computer that file errors.

I am past the scanning portion and now repairing.

While in task manager, I inadverdantly clicked "Create Dump File". I cancelled this right away. The process is still listed, however the amount of memory hasn't changed in a half hour nor has the CPU percentage. I know SCANPST.exe takes a long time to run, so I really want to know if I ended the process so I can start over as soon as possible. However I don't want to wait 12 hours just for it to keep doing nothing.

The window seems to be hanging, it says "not responding", but I'm not sure that is relevant.

In case, Windows 7 SP 1 x64

A:Create Dump File - Does It End Process As Well?

I am unfamiliar with the program. I will try to find you more assistance. Post back if you no longer need help or if no one else responds to you.

2 more replies
Answer Match 44.52%

When analyzing dump files and I get this:

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\DOWNLOADS\012911-20248-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\XSymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.20738.amd64fre.win7_ldr.100618-1621
Machine Name:
Kernel base = 0xfffff800`03c65000 PsLoadedModuleList = 0xfffff800`03e99eb0
Debug session time: Sat Jan 29 15:22:02.793 2011 (UTC + 0:00)
System Uptime: 0 days 0:41:40.603
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
...................................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*********... Read more

A:Weird Dump File Result.

This can arise when your Symbols are corrupt (the contents of the SymCache folder)

Delete the folder and set the symbol path to
SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols

1 more replies
Answer Match 44.52%

Please someone analyze this dump file caused BSOD:

A:Bsod =( [dump file included]

BUMP!
Please someone analyze it

8 more replies
Answer Match 44.52%

Hi I'm running win7 64bit, I have a asus m4a78t-e, and a phenon2 555 x4, and 8 gb ram. I recently backed up, and then tried installing software. Afterwards my PC wouldn't even boot. So I recovered using the Windows disk to before the install. And now every time I boot, it wants to check for errors. I let it the first time, and came back oh about 4 hours later to see the same screen. So ive been skipping the check. Now I want to check, and In disk management my C: drive says "system boot, page file, active, crash dump, pri. Part" is this normal after restoring? And how do I get my system to start normally? Without going to check.

A:Page file, crash dump

Your original crash was probably related to this - unlocking phenon II

Please see this post for how to stop checkdisk running - checking drive c

1 more replies
Answer Match 44.52%

ok so iv been getting random bsod lately and it is becoming more frequent however i do not have knowledge on reading dump files i was wondering if someone could analyze the dump file and explain wats wrong THANK YOU !! IF YOU ARE ABLE TO DO SO PLEASE ASK TO SEND THE DMP FILE

A:help, NEED help analyzing crash dump file !!! PLEASE!

  
Quote: Originally Posted by mattwell


ok so iv been getting random bsod lately and it is becoming more frequent however i do not have knowledge on reading dump files i was wondering if someone could analyze the dump file and explain wats wrong THANK YOU !! IF YOU ARE ABLE TO DO SO PLEASE ASK TO SEND THE DMP FILE


It is you that needs to upload the DMP files

Here is how

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dro... Read more

4 more replies
Answer Match 44.52%

Hi all
I get a BSOD whenever I attempt to enter sleep mode. The screen turns off, but the lights and fan don't, and eventually the computer just turns off. After rebooting it, I receive a "Windows has recovered from an unexpected shutdown" message. Using BlueScreenView I found out that the problem was caused by ntoskrnl.exe, but can't figure anything else out. I'd appreciate any help
Thanks for reading

Computer is running Windows 7 Home Premium x64 and is an HP Dv4t-1400

A:Read my BSOD Dump File?

Hi gullu101 and Welcome.

STOP 0x0000009F: DRIVER_POWER_STATE_FAILURE
Usual causes: Device driver

Your dump file blame Windows System files which is highly unlikely to be the cause.
Old and incompatible drives can and do cause issues with Windows 7.

As a Priority:

The sptd.sys driver is notorious for causing BSOD's with Windows 7. It's used by Daemon Tools /Alcohol 120 which will also have to be uninstalled.
Then use the correct (either 32bit or 64bit) download from Duplex Secure to uninstall the SPTD.SYS driver.
Make sure to select uninstall!
Virtual Drives
Some alternatives to DT/Alcohol that do not use SPTD.SYS (In no order).
DVDFab
MagicDisc
PowerISO (The program is a trial but the drive emulation is free forever).

Outdated Drivers. Update:

btwaudio.sys Tue May 13 05:10:36 2008
btwavdt.sys Tue May 13 05:09:36 2008
btwrchid.sys Tue May 13 05:10:53 2008 Broadcom Bluetooth

HpqKbFiltr.sys Wed Apr 29 14:48:30 2009 HP Quick Launch Buttons

ifsmount.sys Thu Aug 28 21:48:59 2008 Ext2fs File System Driver

NWADIenum.sys Tue Jun 03 00:25:53 2008 Novaltel NWADI Bus Enumerator

RimSerial_AMD64.sys Tue Jan 09 16:50:11 2007 Virtual Serial Port driver for Blackberry. If you can't update then uninstall software. It's obsolete.

Drivers with Updates:

GEARAspiWDM.sys Mon May 18 13:17:04 2009 Gear Software CD-ROM Class Filter Driver

Rt64win7.sys Wed Jun 23 10:10:45 2010 Realtek LAN RTL81xx 7.037

Bugcheck Analysis
Code:
Loading Dump File [C:\DUMPS\gullu101\020311-25287-... Read more

2 more replies
Answer Match 44.52%

Just did clean WIndows 10 64 bit install on a Dell Inspiron 545S with 7GB of RAM and Intel Core 2 Duo E7500. Machine originally came with Win7 Home 32 bit Edition. It actually came with 6GB but threw another Kingston 1 gig chip in that I had. The original chips were pair of 2GB Elpida brand chips along with a 2GB Kingston chip in the 3rd slot. Thought it was odd that Dell used 2 different brands of ram during manufacture. So I put my 1 gig Kingston chip in 4th slot. It spontaneously reboots at random and usually does not record anything about why in the event viewer however a couple of times thankfully it did.  Just figured I would post the dump file info to get some opinions. BTW, ran one pass on Memtest386 and there were no errors. Have not run a test overnight which I plan to do tnite. 
 
Thanks in advance,
Adam
 
 
 
==================================================
Dump File         : 030816-21531-01.dmp
Crash Time        : 3/8/2016 10:08:38 PM
Bug Check String  : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code    : 0x0000001e
Parameter 1       : ffffffff`c0000005
Parameter 2       : fffff801`04cb3010
Parameter 3       : 00000000`00000000
Parameter 4       : ffffffff`ffffffff
Caused By Driver  : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+142450
File Description  : 
Product Name      :&... Read more

More replies
Answer Match 44.52%

I have begun experiencing BSOD frequently but the system does not leave a dump file even though it is configured for that and has the page file enabled with more than adequate memory allotted. I'm attaching the file for review and comment. Help.Attachment 51581

A:BSOD leaves no dump file

Hi TLC1 & Welcome to the forums ^_^,

According to your event logs, it seems that the System was unable to produce a minidump file from the Complete Dump file. Good news is that the Complete Dump file is being written to the disk.

Please upload a ZIPPED copy of the file located at "C:\Windows\MEMORY.DMP". The file size would be large so please make sure you ZIP it up before uploading. Once it is zipped, upload it to a file hoster like Mediafire.

Let me know how it goes ^_^

1 more replies