Tech Problem Aggregator

Unpacking an EXE file

Q: Unpacking an EXE file


I've downloaded a ad-supported free full game, "Prince of Persia The Sands of Time", and it's installation file don't work ("internal error").

How can I extract it's content without using the installer?

A: Unpacking an EXE file

10 more replies
Answer Match 62.58%

HJT log removed as we analyze these only in the log forum and then only rarely. ~ OB

A:I think I got infected after unpacking a malicious file

Please describe the problems you are having with your computer so we can assist you better.

Please update MBAM and run a scan in Normal Mode and post the log in your reply as well.

Orange Blossom

1 more replies
Answer Match 47.88%

I'm trying to install Renaissance Starter Edition, but the program just unpacks the files somewhere, and doesn't actually start the installation routine. I tried it at work, and it started installing, but on my PC at home, it unpacks the files, then nothing. It goes that fast, I don't know what the files are, or where it's put them. Any suggestions?

More replies
Answer Match 47.88%

I've downloaded a large application (Quicken) in .rar format. I extracted it with Winrar and now I have 18 tidy little bundles of 15mb each in the intended directory. Bad news is I haven't the faintest idea what to do with them now. there aren't any .exe or installation files as far as I can see--just those 18 bundles. Can anyone straighten me out?

A:Unpacking .rar

11 more replies
Answer Match 47.46%

I recently ordered a new PC from ironsidecomputers and it didn't work when I plugged it in, I later pulled the front connectors loose replugged them and was able to get it running but the reset powered it on power button reset the system. I was happy but PC was in the wrong spot so I turned it off put it where it need to be and nothing I tried all other outlets then the one that worked previously but nothing. I referred to manual and seemed original set up was wrong but I'm not getting to work in the right set up. What am I doing wrong is it just power problem? I would be talking to tech but it's the weekend. Motherboard is as rock z97 pro 3, Intel core I5 4590 processor, evga 500 watt, nvadia GeForce Gtx 750ti graphics card, 8 ram, win 10, enermax thorax case

A:PC has no power after unpacking

Sounds like to me the front panel connection is hooked up wrong, which could do some damage to the system over time. If your not comfortable taking it apart and reconnecting all if it, I'd wait and take it back to the place where you bought it and have them look at it and fix it.

1 more replies
Answer Match 47.46%


Yesterday I downloaded windows.iso via the Media Creation Tool (it took 8 hours!!). I clicked it today to unpack its contents and failed because an error message told me that there is no program associated with it. I panicked and associated it with Windows Media Player but am scared stiff to use it or do anything. Can anyone help please?


A:Unpacking windows.iso


You can use the free program 7-zip to extract iso (and other) files: 7-Zip

7 more replies
Answer Match 47.46%

Hello everyone
It's a long time since I don't write an article in MA but I decided to explore some important concepts to analyze malware.

"Understanding packers and detecting a packed file" is a topic treated by @kram7750 in this thread :

I will talk to unpacking
The manual unpacking is definitely the most complex to learn. Although a malware can be sometimes much more difficult by a packer, it is much easier to explain the theory behind a malware, rather than explain the operation of a packer. This is primarily due to two reasons. First, you need to have a unpacking knowledge of a wider number of arguments: it is not enough to understand the machine code and know that debugging. In addition, the term "packer" is very generic. The packer implement all sorts of anti-reversing techniques and even an entire book would suffice to explain them all in detail.

I will try to make myself understood even by those who don't have a clue what a packer. However, it is useless to deny that you have to engage, and not just to see this introduction. Do not confuse, even if there are other threads, this article represents the real end of our route. If you include the following, all the rest you'll learn without difficulty and it will update your knowledge base package. Here, we define the article on manual unpacking the culmination of knowledge. To write this introd... Read more

More replies
Answer Match 47.04%

How do I unpack, but not install, SoftPaqs?


View Solution.

A:FAQ(23): Unpacking downloaded SoftPaqs

You can unpack a SoftPaq by running it with a few command line switches.  To do this, open a Windows command box and refer to the following information:Unpacking a SoftPaq fileSp#####.exe ?pdf ?f<path> -s WhereSP####.exe is the Softpaq to unpack.-pdf is a run time switch that overrides the build parameters.-f<Path> is a run time switch that overrides the default path set at build time.-s instructs the package to unpack in silent mode skipping the welcome, license and directory screens.EXAMPLE:At the command box prompt (with Administrator rights to prevent access issues) go to the directory where the SoftPaq is and type the following: sp59909.exe -pdf -fC:\SWSetup\sp59909 -s

3 more replies
Answer Match 47.04%

Whenever I download a large archive, whether it's 7z, RAR format or some bin format (that's unpacked via provided installer), I always have problems unpacking.

What happens is that, while extracting, I receive errors about some files that are corrupted and cannot be extracted. The FUNNY thing is, if I try to extract the same archive again it says some other file is corrupted while the one that was "corrupted on my first try now extracts properly. I don't know how is that even possible.

1) I know that the archives I download/get from friends are not corrupted, and I can trust those sources.
2) I've tried basically everything, like re-downloading, trying with numerous attempts, and updating the software I use (7z, Win RAR, or Daemon tools for those bin archives I mentioned).

Any help? Thanks,

A:I ALWAYS have problems unpacking files. Any help?

I'm wondering if your hard drive has some bad sectors. You might run a disk check program to see. Your drive manufacturer will probably have one.

7 more replies
Answer Match 47.04%

I have just replaced my old desktop for a new one that comes with windows 7 64 bit. But not sure why ever since I started using the new desktop to unpack rars and especially rars with parts, both winrar and 7zip often have error messages like:

"Packed data CRC failed"
"The volume is corrupted"
"The file is corrupted"

For example, one of my family member who lives in Ireland wants to send me a bunch of videos and photos taken from a trip they went. He packed these bunch of files into three part rars and uploaded onto a file hosting website and so I have to download each one of them. I first tried jdownloader and downloaded them but couldn't unzip it. Then I tried to download in the normal way using firefox but still couldn't unpack. And I started to think is the pack corrupted?

But then I tried to use my netbook (with win7 32 bit starter os) and downloaded the files through this computer, it unpacked smoothly without a hassle. I then tried to copy the files I have downloaded using my new desktop to my netbook and try to unpack them there but again it saids the file is corrupted. That means somehow it's not winrar or 7zip's problem but the way my new computer writes the files into the hard disk creates corrupted files?

So what's wrong with my new computer? Even my old desktop won't have these problems. Is it because of the 32 64 bit difference? Perhaps my Ireland cousin packed the files with winrar 32 bit and i used 64 bit didn't work? Or ... Read more

A:Weird when unpacking rars

Win Rar can be installed in bot 32bit/64 versions have you installed the correct version for your system

6 more replies
Answer Match 46.2%

My problem is that if u wanna unpack an exe file, could be a setup exe., then it will save the data in the temp folder (Windows drive), and my problem is that i made a patision (or however to spell that in english.. ) so i got 10 gb for windows, so if my windows ****s up i will be able to just reinstall without worrying too much for my files. (Programs like registery mechanic will often solve the registery prob.) Anyways, this means i don't have enough space on my c-drive, as i should have given it more ofc.. Should have given it 15 instead, as my programs are on that drive aswel... anyways! thats not the matter.. the matter is that when some exe. files wants to extract they want to extract huge amounts of software before installing, im talking about 1,3 gb + here, and i cant get that much space without deleting half of my programs or so.. SO what i want to know, is there a way to manualy unpack an exe. file ? Or is there a way to change its unpacking destination, so it won't save in temp.. thanks for all upcomming answer.

- Hans, Denmark.

A:Hard times unpacking exe files.

Change the place where it unpacks to the other partition you have for files, programs etc. This should be on the extraction wizard.

2 more replies
Answer Match 46.2%

Switched my web browser yesterday to MSNBC. Get an error message while in there "error while unpacking program, Code 2 Please report to author????????

More replies
Answer Match 45.36%

I changed my os to win 7 64 bit, I'm trying to install microsoft 2010 office 64bit from an online link. it downloaded and goes to unpack when I get an error while it's checking crc. It stops and the error says insufficient disk space or errors on disk. I have 80gb free on my drive. and I cleaned the disk from previous installs. Stuck?? Please help

A:online install error in unpacking download while checking crc

Downloaded from what online link?

The last I heard, 32-bit was the recommended version even for 64-bit systems?

Choose the 32-bit or 64-bit version of Office - Word -

2 more replies
Answer Match 45.36%

how do i stop this message from coming on my computer all the time?

Error while unpacking program, code 2. Please report to author.

A:Error while unpacking program, code 2. Please report to author.

was there a reply posted ?

[email protected]

2 more replies
Answer Match 45.36%

This help request might fit in alternate discussion threads, but this seems like the most logical place to post... these could be 2 separate issues, but it feels like they are connected to me.

A - Unpacking any RAR, Zip, 7z, etc file - particularly large ones results in CRC or other unpacking errors 90% of the time. Sometimes a simple retry works, sometimes re-downloading the compressed file works.. sometimes nothing works. Anything over 1GB is almost sure to fail miserably every time (often fails on different files within the package.
(this occurs using winzip, winrar, 7zip)

B - Multiple game client crashes - Oblivion, Various MMORPG (WoW, LOTRO, many others) crash constantly.. if the computer doesn't freeze or blue screen, the error is 100% the client .exe file .. it doesn't happen just on strenuous load sequences or 'laggy' areas.. it can just happen sitting in the middle of an unpopulated area.. varies once per 1-5 hrs.. rarely goes 3 gameplay attempts without at least 1 crash.

Both errors have occured pretty consistently over the last 3 years.. i give up on some games that have more crashes than others.. and give up on some because i can never even unpack the game to play it.

Original System: Dell XPS 600 Purchased October 2005 .. problems started right away - but I just ignored most of them until after warranty

Hardware Replaced:
Video Card (6 mos ago).. was nvidia 7800 gtx, now nvidia 8600 i believe..
Hard Drive(3 mos ago) - was Maxtor... Read more

A:Constant Unpacking Errors and Game Client Crashes

sorry - i hate bumping - put posted this late last night - figure there are more people on the forums now that hopefully have some advice!


4 more replies
Answer Match 45.36%

Hi guys, I have just recently upgrade my computer from Windows XP to Windows 7, but since then I haven't been able to install most games.

During installation, each game has a different error message but generally, the problem seems to lie in games that require unpacking large files, such as *.bin. For example, while trying to install Assassin's Creed 3, this message appeared:

An error occurred while unpacking: archive corrupted! Unarc.dll returned an error code: -7. ERROR: archive data corrupted(decompression failed)Click to expand...


Decompression failed with error code: -12. Bad CRC in the archive data0.binClick to expand...

Please help me, I'm going mad.

Computer's spec:

OS: Windows 7 Ultimate 64-bit (6.1, Build 7600)
Processor: Intel Core i5 CPU 750 @ 2.67GHz (4CPUs)
RAM: Elixir DDRam 3 2GB x2
GPU: ATI Radeon HD 4800 Series
DirectX 11
Motherboard: ASUS P7P55D
BIOS: 9/24/9 Ver: 08.00.15

What I've tried so far:

Updated drivers of graphic card, mainboard, etc.
Ran as Administrator.
Installed in safe mode.
Tried installing these games in another computer (everything's fine)
Reinstalled Windows 7.
Formatted entire HDD, reinstalled Windows XP (now even Windows XP has this problem)
Bought a new HDD


A:Cannot install softwares which require unpacking large files

what site are you downloading these from?

3 more replies
Answer Match 45.36%

Error while unpacking program, code LP5. Please report to author.

A:Error while unpacking program, code LP5. Please report to author.

You are going to have to provide a lot more detail in order for anyone to be able to answer your question. Please include as much information as you can in your posts.

2 more replies
Answer Match 45.36%

The captioned message appears whenever I try to update my antispyware application, so preventing it. When I stopped the firewall and runned a sfc /scannow and corrected 3 or 4 system files, it did open, but no more after reopening the firewall.

A:Error while unpacking program, code 2. Please report to author.

You may have other Spyware issues. First you can disable the Firewall. If the Spyware program opens then it has it's own Firewall that conflicts with Windows. You should also download CCleaner delete temp files, run Registry Cleaner too. Then download malwarebytes run full scan delete nasties.

9 more replies
Answer Match 40.32%

first of all, hello to you all

as they thread title may allude; i am a little disgruntled at my first atempt to install my brand new genuine Windows 7 x64 Home Premium OEM

after the first 4 attempts at installing Win7 i managed to get around the installer asking for 'unknown device driver' by unplugging my card reader. I have been running XP x64 OEM for some time and have re-installed it at least 5 times and have never had any problems what so ever; if only the same were true for Win7!

having done some research it became clear that Win7 should take no more then 30-40 minutes to install; but here i am 23hrs later and it STILL hasn't even started installing yet; its still 'unpacking windows files' @ 99%...

has anyone else had this problem? if so, what did you do to fix it?

thanks in advance

A:23hrs - "unpacking windows files"

Welcome to Seven Forums.

Nice job on the system specs.

Sorry your having problems.
How long has it been at 99%?

We've made a list of questions which are the result of reoccurring incidents seen so far.
If you can have a look at these and give us your answers we'll be able to give you better suggestions.

Questions to use for help with Installation Issues

We have also seen people with AMD mother boards having these problems, try taking out all memory cards except one, if that doesn't work then move the memory card to a different slot and try again.

Do you have HyperTransport function settings in your BIOS?
There are two options in the BIOS Setup called K8 -- KN HT Speed and K8 -- KN HT Width, both are normally set as Auto. Change them to K8 -- KN HT Speed to 1x and K8 <-> KN HT Width to 8 8. You can change them back after the install.

If this doesn't work, then reply with more details and we'll try again.
Just read a thread where a guy with an AMD board was having similar problems said he turned off 'Cool 'n Quiet' setting (the feature that turns down the fan RPM). He also found a bad RAM stick by running memtest86+. After that Win7 installed with no problem. Might be worth a try.

4 more replies
Answer Match 39.48%

Hi... I was wondering if anyone else is having same problem as me when trying to install the 32-bit RC. I have created a 50 gigs logical partition on my hard drive to install windows 7 on (i'm using Vista Home Premium on my Dell laptop). on installation screen i select the drive for the new installation and so it goes to the next screen where it shows a list of bunch of stuff that it's supposed to do. The first one is "copying files" or something along those lines which gets checked and so it moves to the second thing that is i believe called unpacking the installation files (or something similar). My installation "freezes" there as it shows 0% for about an hour or two and then it errors and cancels the installation.
any help would be much appreciated.

A:"unpacking" problem in RC installation


Try re-burning the iso at 4X speed with imgburn

3 more replies
Answer Match 28.14%

I ran hijack-this on my laptop today and I get a lot of errors when I post on this site and check to fix them and they keep coming back. I have heard this was a common somewhere on the web? I don't think it is .., am I wrong? Please help!

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:58:39 PM, on 9/6/2010
Platform: Unknown Windows (WinNT 6.01.3504)
MSIE: Internet Explorer v8.00 (8.00.7600.16385)
Boot mode: Normal

Running processes:
C:\Program Files (x86)\Norton 360\Engine\\ccSvcHst.exe
C:\Program Files (x86)\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files (x86)\Norton Utilities 14\RMTray.exe
C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe
C:\Program Files (x86)\Steam\steam.exe
C:\Program Files (x86)\Mozilla Firefox\firefox.exe
C:\Program Files (x86)\Mozilla Firefox\plugin-container.exe
C:\Program Files (x86)\Trend Micro\HijackThis\HijackThis.exe

R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch =
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page = C:\Windows\SysWOW64\blank.htm
R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,ProxyOverride = *.local
R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =
F2 - REG:system.ini: UserInit=userinit.exe
O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Progra... Read more

A:Windows 7 64bit unable to file missing file in Hijackthis log file

It's doubtful those files are missing. More likely a bug still present in HijackThis where it cannot correctly enumerate some entries, so it gives a (file missing).

I would not put any faith in online analyzers such as that one. Much better to use these online databases

There's nothing wrong with any of those entries. Please leave them alone.

Analysis logs are only to be posted in this section of the forum, not General Security. I've moved it here.

I see no sign of infection in those logs. If you think the machine is infected...

We no longer use HijackThis as our initial analysis tool.

We want all our members to perform the steps outlined in the link I'll give you below, before posting for assistance. There's a sticky at the top of this forum, and a

Having problems with spyware and pop-ups? First Steps

link at the top of each page.


Please follow our pre-posting process outlined here:

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, not here. I currently have as many open malware removal assistance topics as I can effectively handle.

If you have trouble with one of the steps, simply move... Read more

4 more replies
Answer Match 27.72%

God bless you, I am not a computer person please help me to fix the problem I have.
Every time I open a word, power point and note pad program another file is opens with that (with a infinity sign in the front with the same extension ) is that a thread or how can I stop this

thank you

Please someone help me

A:when open a word file or pwrpnt file another file is opens

Welcome to the Seven Forums.

I saw your post right after you made it but I did not post a reply because:
1) Real life got in the way
2) I'm not sure that I understand your issue.
I'm not picking at your English, but this is important:

Your post mentioned, "another file is opens with that".

I'm guessing that you meant:
...another file is opened with that
...another file opens with that

Either way, the word open is really important to the description of your problem.

Let's just talk about Word for now.

When you open a Word, one or more temporary files may be created. This is normal and desired; but those temp file(s) should not automatically open in Word.

Please try this:
Close all copies of Word.
Open Windows (file) Explorer.
Double click on an existing Word document.

How many windows do you have open for the Word program?
(Hopefully, just one.)

How many files do you have open in the Word program?
(Hopefully, just one.)

Are you seeing this file that bothers when you look at Word or when you look at Windows (file) Explorer?

Please show us what you see and where you see it.
Here is a link with instructions about posting screenshots to this forum:
Screenshots and Files - Upload and Post in Seven Forums

Your post mentioned, "(with a infinity sign in the front with the same extension )"
The temporary file(s) that Word might create should start with a Tilde character and then the dollar sign (~$), not the symbol for infinity. And Notepad s... Read more

1 more replies
Answer Match 27.72%

Hi all,

Any idea how to write Batch File .bat to copy file from File Sharing & FTP Hosting to local directory.

Current the File Sharing & FTP Hosting is SMARTFILE.

I don't want to use WINSCP as the connector.


A:Batch File .bat to copy file from File Sharing & FTP Hosting

Hi Chacha,

Give this batch file a try. All text in red, you should adjust before running.

@echo off
echo.lcd C:\Some\local\directory /Some/server/path
echo.get Some_file_to_download.txt
) > "%TEMP%\_%~n0.ftp"
ftp -s:"%TEMP%\_%~n0.ftp" ""
del "%TEMP%\_%~n0.ftp"

1 more replies
Answer Match 27.72%

Every now and then, when I try opening an Excel file, I get a message saying that "Excel cannot open the file 'file.xlsx' because the file format or the file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file.

A:Excel cannot open the file 'file.xlsx' because the file format

Older versions of Microsoft Office can't open the newer office formats,try updating and installing Microsofts file format converters.

2 more replies
Answer Match 27.72%

I have been using this same Excel file for many years. I viewed on my new home laptop 2 days ago, using a 2010 Excel Version. It was created on 2007.

I opened it on my work computer, version 2003, and now get the above error message on both machines. The file can no longer be opened.

I have tried emailing it, still won't open.

I have chenged the file type to both .xls and .xlxs neither open.

I downloaded the program on the home page of this site, and it said no file issues, no known problems for this file.

When I click Open File, it still shows where I had the file opened (the file name in lighter gray font - but cannot open.) The original file is in black, and I can open. But, get that message.

I also tried to open and fix - and I tried both options, with formulas, and without formulas, and all it opened was foreign characters.

Any other suggestions? Or is this file gone? Unfortunately, my most recent back up is 3-4 months old...

Thank you for your help,

A:Excel File now says File Format or File Extension is not valid...

6 more replies
Answer Match 27.72%

Hi all,
I need help to create windows batch file for following requirements.
1. Remove .txt and .log file format in sub folders.
2. Zip individual file inside any sub folders and give file name through command prompt. 
3. Create sub folder zip file include file zip

More replies
Answer Match 27.72%

Hello everyone,

Firstly I would like to say that this seems like a swell enough forum as is and I am frankly out of ideas. About a year ago I had backed up a rather large series of files under one name for my roommate who was in the process of doing some "spring cleaning" on his computer. Fast forward to now and he is out of Hard-drive space damn near and has been unable to find the reserve file himself. Below is the directory under which I named and saved the around 200gb file of games and old-ROTC documents. Regardless the file needs to be found and even after un-hiding all files from the control panel, I have yet been able to locate it. It would seem to be simple enough, one would think that you could see the file name sitting above Program Files but it is not. Any one have any ideas, we would rather not have to reformat/ system restore if we can avoid it.


A:File path error/ Cannot find file directory/file itself

I used a software called TreeSize which shows the size of all folders on the disk. Thinking that the Windows OS is around 18gb, a 200gb files should really stick out with TreeSize.

1 more replies
Answer Match 27.3%

I tried the recommendations for fixing this below:


Follow these steps to grant full permissions to the folder where the files are stored: 1. Right click on the folder on the external drive and click on
properties. 2. On the property window, click Security tab.
3. Now click on Edit and then click Add.
4. Now type everyone in the box and
click OK.

5. Then check Full control check box.

6. Click on Apply and then click OK.
You may also try the below mentioned steps:
1. Click on Start. 2. Go to Control Panel. 3. Select "SOUND". 4. Double click on speakers. 5. Click on advanced tab and then uncheck enable audio enhancements.

But then I received the error message that I don't have rights to edit and add.  Why would this be?  I am the administrator?


A:Windows Media Player cannot access the file. The file might be in use, you might not have access to the computer where the file is stored, or your proxy settings might not be correct.

Please first take ownership of the folder or files, then give yourself full control permission.
Learn How to Take or Assign Ownership of Files and Folders
Yolanda Zhu
TechNet Community Support

3 more replies
Answer Match 26.88%

I would like to know if there is a way to open a file in a program. Basically I want something like this (this is totally wrong):

open "C:Users\*My name*\My Documents\run.swf" in "C:\Program Files (x86)\Mozilla Firefox\firefox.exe


A:Create a batch file to open a certain file in a certain file

The more standard way to do that is to use the start cmd. You call the program first and the file name second.

start "" "c:\windows\notepad.exe" "c:\somepath\logfile.txt"

2 more replies
Answer Match 26.88%

I need to change a zip file to an epub file. I have heard this can be done, but when I add the .epub after the file name, I notice the file is still actually zip type file when I right click properties. This is causing a problem when I try to open it in in different ebook reader programs.

I know there is a way to change a file's actual file type, but I don't know how. Perhaps there is a software or I need to go into the registry?

I can do this either with windows 7 or XP home, because I have two computers. So help on either operating system would be great?

As a related question, I am wondering does changing a file's icon type actually change the file type or just the icon?

A:How do I change a file's file type (not only file association)?

Hi awd and welcome to Seven Forums.

I take it that your zip file is an e-book. Changing the extension does nothing to change the format of the data. If you have need to convert an e-book from one format to another try Calibre. In addition to managing e-books it allows you to convert from one form to another. calibre - E-book management

8 more replies
Answer Match 25.62%

Ok I'm totally at a loss on how to word this so I'm just going to write it out the best that I can...

First I have a batch file that I'm writing that will convert mp4 files to mp3 files (I have a lot) for a buddies band using ffmpeg.

Here's the code that I'm using:

ffmpeg -i folder\video.mp4 -f mp3 -ab 160000 -vn "\different folder\music.mp3"

what I would like to do is add to this so that I don't have to write out this code for every file I have... :/

I have the mp4 files in one folder and than the mp3 files are saving to another folder.

So here's an example of what the code will do if it isn't clear yet.

Folder 1:


what it should do is grab video1.mp4 and convert it.

ffmpeg -i folder\video1.mp4 -f mp3 -ab 160000 -vn "\different folder\music1.mp3"

and than move onto the next one

ffmpeg -i folder\video2.mp4 -f mp3 -ab 160000 -vn "\different folder\music2.mp3"

and than the next one

ffmpeg -i folder\video3.mp4 -f mp3 -ab 160000 -vn "\different folder\music3.mp3"

It's going to have to grab the name from the mp4 file and insert it for the mp3 file.

I can get around pretty good in cmd if it's basic commands but when it comes to something like this I'm a little confused...

Thanks for the help in advance!
I'll see what i can do about searching some more on what I would have to do and if I find the solution I'll post it here if it isn't already answered.

A:Batch File that grabs file names from folder to insert into batch file

A DOS "for /f" loop should do the trick, although changing the filename extension for the output to do everything in one line escapes me at the moment.

Perhaps you could do a dir .\folder\*.mp4/s/b > mp4s.txt, then make a copy of that and edit each line to rename the file to the destination name, and save it as mp3s.txt. Then you just feed both the source (mp4s.txt) and destination (mp3s.txt) filesnames into the for /f loop which handles the ffmpeg conversion.

Quite a crude solution and you'd have to handpatch the destination filenames, but i can't think of how to get a source mp4 filename and then just change the extension.

3 more replies
Answer Match 25.62%

whenever I open docx file there is hidden file ~$name of file.docx created. which type of file is that? Is it in virus, maleware. for example If I open house.docx file then ~$house.docx file created which is hidden form. I had saw this file when i select show all hidden file option. when i try to open ~$house.docx file it show message the file is corrupted and cannot be open.please help.

A:hidden file of docx file created with ~$name of file.docx file

That's normal and nothing to worry about.
It's a temp file Word creates when you open a file.
If Word closes normally, the temp file gets deleted.

1 more replies
Answer Match 25.2%

First, what does "CBS" mean in cbs.log?

Does the cbs.log file show only errors? I create a cbs.log file a lot, so if there are errors, I'd like to correct them. However, my computer seems to be working just fine. sfc /scannow shows everything is OK.

I've tried findstr /c:"[SR]" %windir%\logs\cbs\cbs.log > c:\test.txt to create a text file so that I can read the cbs.log file, but this command creates the test.txt file with 0 bytes, and I know the cbs.log file is at least 1,000 bytes.

So, 1) how do I get a workable copy of my cbs.log file, and 2) how does one interpret its meaning?


A:CBS.log file: Getting a usable txt file and interpreting the file

You don't have any [SR] flagged entries in the cbs.log file.

To look at it, from a Command Prompt, enter:

notepad %windir%\logs\cbs\cbs.log

If you use Ctrl+F you can search for things, like [SR].

I believe System File Checker (SFC) adds the [SR] entries. If you haven't run it then they won't be there.

3 more replies
Answer Match 25.2%

i would like to open a file of tmp which was originally an excel file please assist me accomplish the task as the file was the database am using to enter my tools from the field and i dnt have a back up for the last records of one month i will be glad if i get your asistance. am looking forward for a positive answerregardsgordon

A:please help me open a file of tmp file into excel file?

Read this:

2 more replies
Answer Match 24.36%

 6 user registry handles leaked from \Registry\User\S-1-5-21-876378617-1490751924-622671684-72003:
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003
Process 704 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003\Software\Microsoft\SystemCertificates\Disallowed
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003\Software\Microsoft\SystemCertificates\MY
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003\Software\Microsoft\SystemCertificates\CA

More replies
Answer Match 24.36%

I've been searching the web on how to accomplish this but am coming up empty handed so I am hoping someone here can help...

I want my batch file to read a random line from a text file into an environment variable - can this be done?

I am using Windows 2000.

A:Batch File -- Read Random Line from External File into an Environment Variable

6 more replies
Answer Match 24.36%

Well, where to put this strange problem? XP, Office or Network Forum. All three seem to be involved somehow.

What gives?

I have a few large Excel files on
a) a share on a Win XP SP2 desktop
b) a share on a WIn Vista desktop
c) a share on a Ubuntu 6.06 desktop

When i mean large, i mean ~75Mb

When i work on my laptop (Win Xp SP2, 1Gb Ram, 1,86 GHz), i can access all shares just fine. But when i right click such a large Excel file on the XP or Vista computer and click 'Properties', my laptop becomes unresponsive for about a minute. Then, at last, the properties are shown. In the Taskmanager, on the LAN tab, it shows that my LAN connection is swamped at 70% for a whole minute. Sniffing the network traffic learns that the entire contents of the file is being transferred through the network to my laptop!
Just to see the properties...

However, when i right click the same file on a Ubuntu share, the properties come up instantly.

When i right click other large files on the XP/Vista shares (like *.iso of *.avi files), bingo, properties pop up instantly.

When i right click the large Excel files on the Xp/Vista share from a Win 2003 server (without office installed), voila, properties show up instantly.

So why is the whole Excel file transferred by just right clicking it for properties?
I'm convinced this behaviour adds to slow file share performance in general. For example, if i want to copy such a large excel file form the XP or Vista share, it takes 10... Read more

A:Right clicking a large Excel file in a network share makes the entire file being sent

sounds to me like your computer doesn't have much ram.

how much ram does your computer have?

Christian Dude

13 more replies
Answer Match 24.36%

Please review steps already taken here:

DDS results:
DDS (Ver_2011-08-26.01) - NTFSAMD64
Internet Explorer: 9.0.8112.16421 BrowserJavaVersion: 1.6.0_30
Run by HP at 23:13:02 on 2011-12-31
Microsoft Windows 7 Professional 6.1.7601.1.1252.1.1033.18.8174.5429 [GMT -5:00]
AV: Norton Internet Security *Enabled/Updated* {63DF5164-9100-186D-2187-8DC619EFD8BF}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Norton Internet Security *Enabled/Updated* {D8BEB080-B73A-17E3-1B37-B6B462689202}
FW: Norton Internet Security *Enabled* {5BE4D041-DB6F-1935-0AD8-24F3E73C9FC4}
============== Running Processes ===============
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Program Files\IDT\WDM\STacSV64.exe
C:\Windows\system32\svchost.exe -k LocalService
C:... Read more

A:Infected MBR - Norton power eraser says rikvm_C6F09094.sys is a bad file but the file remains and never gets fixed

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you are unable to create a log because your computer cannot start up successfully please provide detailed information about the Windows version you are using: What we in particular need to know is version, edition and if it is a 32bit or a 64bit system. [/b]If you are unsure about any of these caracteristics, just let us know and we'll help you figuring it out. Please also tell us if you have your Windows CD/DVD handy.Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about y... Read more

21 more replies
Answer Match 24.36%

I run into this problem often. When working with Photoshop files (PSD in the most recent case), sometimes when I make a change and then try to save the changes I come up with this error dialog. My work flow is always the same - I am the computer's administrator.
I am the only person with access to this computer. There are no other users on this computer. This computer is not tied to any server or network. My files are generated from my own work obtained from my camera. I normally save changes to the file several times
so I won't lose my work. I can save the file using a different name, but then I cannot delete the original file unless I reboot the computer and open it up again. Please explain why this randomly reoccurs.

A:File Access Denied - You require permission from the computer's administrator to make changes to this file

Hi dmiddleton123,
"When working with Photoshop files (PSD in the most recent case), sometimes when I make a change and then try to save the changes I come up with this error dialog. "
When did the issue start to occur ?The issue only occur with the specific software ?Have you tried to change another location to saved file or reopen the software (end the software process from the task manager)to have a check ?
This issue is a little weired,please take the following steps to have a check .
1.Run "sfc /scannow" to check the health of the system files .
2.Perform a full scan with an antivirus software .
3.Perform a clean boot to verify whether there is a third party conflict here.
How to perform a clean boot in Windows
4.Create a new administrator and login with it to have a check.There is a possibility that the present account profile has corrupted.
If the issue only occurred with the specific software ,it is also recommended to ask for help from the software developer .
Best regards

Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

2 more replies
Answer Match 24.36%

Boot sector of hard drive went bad. Putting new drive in. Does anyone know how one can use the old drive as a "slave" drive in an attempt to recover files from the bad drive? Does anyone make a HD cable or adapter for laptop computer hard drive?

A:Compaq N600C laptop hard drive file cale for file recovery

Hi Al

If the laptop uses a standard IDE laptop connector you can buy an adaptor like this to hook the laptop hard drive up to a standard PC IDE port.

1 more replies
Answer Match 24.36%

I am using windows 7 ultimate 64 bit and this virus change extensions to word pdf and jpeg files, Extension *. bemrjof  was there to my entire Microsoft office data and all the PDF's and all photo file formats.  I tried many things but nothing worked, then I try to manually change the extensions and got really scared when saw that file is corrupted,i really don't know what to do anybody has any suggestions plz let me know.
thank you 

A:Virus changed file extensions of Microsoft office file, PDF's and photo files

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

2 more replies
Answer Match 24.36%


Ive been searching the net for help with this and i just cant find what im looking for.

Im still new at excel macro's so still learning everyday.

I need help to wright a macro that will search in a folder for a file with a specific keyword that can be in the file name.

example: lets say i want to open a file that is in a folder that has "leadership" in the files name.
Because i send the file to people called "leadership.xls" and i recieve files back called "copyofleadership.xls" and different other names but there will always be leadership in the file name.

Can anyone please help me with this.


A:Excel macro to open a file in a folder with a specific keyword in the file names

6 more replies
Answer Match 24.36%

Hello world. I have an important problem. I can't open, use or even preview files that the name of those files are colored in green. (like this)First, I would serve a chronology:- Before I reformatted my computer to windows Vista Starter SP1, I am using Windows XP Pro SP3.- Back when my Operating System is Windows XP Pro SP3, my hard drive is partitioned into two (C:/ and D:/).- I put some files (pictures, documents, apps) on one of the drives (D:/).- I tweaked the folder of the files' properties(security tab) and applied some changes in its security/sharing etc. It made a process like "applying the setting" which after that, - The name of the files and folders/subfolders turned into green!(like this)- I did this because there are multiple users on my computer(cousins) and I don't want them to mess up with my files.- I didn't see anything wrong in doing that I supposed, so I just left those files to stay that way (like this) ---- this part is the problem part ----- I finally decided to upgrade to Windows Vista Starter SP1 operating system. I installed it in the C:/ partition of my hard drive.- The files in the other partition (D:/) stayed there untouched.- I tried to insert a picture in a document, that "picture" would be a file that I am talking about a while ago, the file in drive (D:/) which its name is like this- Unfortunately, it said something like: "WORD CAN'T OPEN FILE: FILE PERMISSIONS NOT ALLOWED"- I was astonished! For... Read more

A:Cannot open, edit, preview, file from drive partition: file access not permitted

Are you the Adminstrator (with a set password)?

17 more replies
Answer Match 24.36%

During a TrendMicro virus scan, it found an archive that was infected. A quick check of the archive (Which I'd grabbed months before, but never ran) showed it was actually an application, so I went to shift+del the file (No sense dumping a virus into the recycle bin), and poof it's gone.

Then I went to delete the folder it was in, but... it wouldn't let me. Told me I didn't have the permissions to do so. A quick check of the folder's contents revealed the virus/app was back, as if it had never been deleted.

If I try doing a regular delete, it tells me Destination Folder Access Denied.

So I started poking around the file's security properties.
"Unable to display current owner."

I tried changing the owner, but it wouldn't let me do that.
I downloaded Unlocker, right-clicked on the file and unlocked it, but nothing seemed to happen, and same results when I try to delete it.

I'm running Vista 32-bit, not connected to a local network (Just one computer), and I'd really like to delete this virus/app off my machine. TrendMicro was unable to get rid of it, and I can't seem to get rid of it either.

A:Solved: Cannot delete file / No Permissions - Unable to display current owner of file

Ha, nevermind. Unlocker just took an enormous amount of time in actually starting up, and turns out the virus scanner had a process linked to the file. So, problem solved. Nothing to see here.

1 more replies
Answer Match 24.36%

I opened a PDF file in notepad then in Word, now all PDF in my windows explorer shows a Word-like icon and file opens automatically in word.  I checked folder options and rebooted the machine, but it still shows that icon.  

How can I get the PDF file type icon back and file opens in Adobe automatically?
Thanks for any tips!

A:How can I get PDF file type icon back in Windows Explorer after I opend the file in Notepad?

Found it -
Control Panel > Default Program OR  Start >Default Program (if the shortcut already there) > select PDF file type and change default file association > pick Adobe 

0 more replies
Answer Match 24.36%

I have a smartphone running Windows Mobile 5.0. I tried to install Acrobat Reader and it didn't work. Now the .pdf association with File Viewer doesn't work. Does anyone know how to create file associations? Either a registry hack or free software would be good.

More replies
Answer Match 24.36%


Windows 7 Pro SP1 64 bit
Intel i5 CPU @2.67 GHz

This problem just started recently or I only noticed it in the past week or so. When I'm in any application that launches the File Open dialog, including any browser's "Select File/Browse" button to choose a local file, when I select a file (even a small 1K file) from the dialog and the dialog closes, there is a 5 - 10 second delay before the app responds and either opens the file or in the case of a browser, displays the file name. In those 5-10 seconds, the app is non-responsive. In a browser, other fields on the form cannot be clicked or selected for the 5-10 second period -- then the selected filename appears on the form.

This happens in all 4 browsers I tried: Chrome 32, IE 11, Firefox 26, and Safari.

I also booted Windows in safe mode and the problem still occurred.

I also ran KingSoft Office Writer and selected File->Open and the same issue occurs after selecting the file -- there is a noticeable delay that wasn't previously there.

In a code editor (PSPad), opening a file does the same thing as well (hangs for several seconds after selecting the file).

Randomly during testing, (but probably < ~5% of the time) it doesn't delay and works properly.

I ran System File Checker and MS Security Essentials, but both turned up a clean machine.

Has anyone else experienced anything like this lately?


A:File Open or Choose File dialog hangs application after selection made

Figured this one out... It turns out a network attached drive was not on for some reason and I had a drive letter mapped to it. Once I turned the drive back on, the hanging symptom went away!

1 more replies
Answer Match 24.36%

Logfile of Trend Micro HijackThis v2.0.2Scan saved at 11:10:21 AM, on 9/6/2009Platform: Windows Vista SP2 (WinNT 6.00.1906)MSIE: Internet Explorer v8.00 (8.00.6001.18813)Boot mode: NormalRunning processes:C:\Program Files (x86)\Google\Google Calendar Sync\GoogleCalendarSync.exeC:\Program Files (x86)\Elaborate Bytes\VirtualCloneDrive\VCDDaemon.exeC:\Program Files (x86)\Avira\AntiVir Desktop\avgnt.exeC:\Program Files (x86)\Internet Explorer\iexplore.exeC:\Program Files (x86)\Internet Explorer\iexplore.exeC:\Windows\SysWow64\Macromed\Flash\FlashUtil10c.exeC:\Windows\sysWow64\SearchProtocolHost.exeC:\Program Files (x86)\Trend Micro\HijackThis\HijackThis.exeR1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = - HKLM\Software\... Read more

A:Intermittent Crashes, Vista Ultimate 64, whats with the "file missing" entries in my log file

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Answer Match 24.36%

I'm in the process of repair/recovery of my machine (Dell Inspiron 8500 with Windows XP Home, Service Pack 2). I'm following exactly the instructions in:, but a problem has developed. The "software" file (which is the file that the original blue screen error message says is "corrupt, absent or not writable") will not copy to the new tmp directory to create the backup. My understanding from the article is that this backup file (software.bak) will later be used to restore correct settings for various software applications. Since I can't copy it, it appears that I am screwed, no? Or is there a way out somehow?

Thanks to anyone who's been there and can help...

BTW I have the XP installation disk that came with, and a diagnostics disk which I have not yet run.


A:Blue Screen: Registry File Failure; can't copy corrupted file to tmp directory

Never mind, I had it wrong--didn't read the document referred to above carefully enough. The procedure worked like a charm, and the document is very easy to read and entertaining to boot! (pun intended).

The document describes a procedure that closely follows a Microsoft KB document (which I now can't find) but does not contain any warning regarding whether the OS is an OEM (original equipment manufacture) install or not. The Microsoft doc says not to use the procedure on an OEM-installed OS, but I just did it on my Dell, so that warning seems to be incorrect.

Many many thanks for the help provided by this document and this site.

1 more replies
Answer Match 24.36%

If anyone could help that would be amazing something very bad happened.]
I use windows 8.1 im using hypercam v2 and i was recording something very important worth 100$ and i got scammed but for some reason when i try to open my video it says "Windows Media Player encountered a problem while playing the file." 
Ive recorded 100s of times and this never happens so why is it saying this and please if anyone can help me fix this that would be a life saver!
feel free to ask more questions 

A:Broken file! Windows Media Player encountered a problem while playing the file.

You could try playing it in VLC?

2 more replies
Answer Match 24.36%

I need convert/save Excel files into the ASCII comma delimited text files. It needs to be in this format in order to upload healthcare data to the CDC (NHSN).

Thank you.

A:How to convert/save an Excel file to ASCII comma delimited text file

File - Save As. Change Save as type option at the bottom...

3 more replies
Answer Match 24.36%

Dear All,

I need to create a batch file which can read the size of file(e.g. 1kb, 2kb...etc) from specific folder and detect 0kb file and convert it to text file (showing 0kb file size) with alarm.

I am not really sure how to write command for this batch file. Please help :-(

A:How to create a batch file to read size of file on specific folder path

10 more replies
Answer Match 24.36%

How can I move/copy a file from one disk to another without changing the file's creation date?

A:Copy/Move File from One Disk To Another w/o Changing the File Creation Date

You can use a utility called "Set File Date" to change a file's creation date to whatever you want.

1 more replies
Answer Match 24.36%

In Outlook express, I used to be able to view the first part or several
parts of a split movie or pictures to see whether
it was worth downloading.

In windows mail, it seems that this is not possible and I have to download
all parts completely before I can view the

More replies
Answer Match 24.36%

I've been given an xlsx file. The customer can only use xls files, so I converted the xlsx file to xls but the new xls file has problems. Missing boxes, formatting off a bit, shading gone.

If I simply open the converted xls file then save it, everything is fine. If I open the xls file and so much as enter the word 'hi in a field, then save, the compatibility checker says significant loss of functionality.

This company laptop has Excel 2010 on it. I think I'm trying to convert a 2007 version to a 97-2003 version, but using this 2010 version. What's going on? And how do I edit the new xls file without any Compatibility Checker problems?
Thank you so much for helping.

More replies
Answer Match 24.36%

WMC recording/playback and media/file sharing seems to work fine until I go to copy a file between drives, where one of those drives is currently using some of its i/o bandwidth to do media. The copy hogs the i/o bandwidth, doing nasty things to the real-time needs.

How do I permanently tell Win7 x64 to do all [explorer] copies at a lower CPU and i/o (explorer.exe & system) priority and/or elevate WMC CPU & i/o (ehshell.exe?) and file/media sharing priorities a bit?

The PC is up to date on patches/drivers and should be able to prioritize obvious applications?

A:Problem with file copying adversely affecting media/file sharing & WMC

Right click on the process in Task Manager. There you can set the priority.

2 more replies
Answer Match 24.36%

How to create a batch file that will move files based on the file type?

My Requirement : I need a batch file to copy all .doc files in all my HardDisk to a removable disk say (Z: drive) . Can anyone make it possible using a batch file?Please...Its urgent...

A:How to create a batch file that will move files based on the file type

Download XXCopy
XXCOPY, A Versatile File Management Utility --- Boldly Extended Xcopy
This is a vastly improved and extended version of DOS XCopy
Sorry, can't remember the syntax, but its quite simple if you read the manuel carefully :-)
Put the command line in a .bat file and it will run

4 more replies
Answer Match 24.36%

Anytime I drag a file(s) in a folder window, a translucent, oversized icon follows the mouse pointer, partially obscuring up to 4 nearby items.

Can this effect be disabled? I'm sure somebody at MS thought it was slick idea, but it just gives me a headache. I haven't found a setting that controls it -- maybe I'm looking in the wrong spot. (Am guessing, while this isn't an "animation" per se, it's in the same general category.)

Thanks a ton for any clues.


More replies
Answer Match 24.36%

well i unlocked a system locked (pad lock symbol) folder by accident looking for something else and since than the following issues are observed. and i don't remember the folder =(

when the system boots it will boot very slowly. the screen will turn black with the mouse pointer visible for
maybe 30 seconds? than the desktop will appear as normal. all systems once booted appear to be normal.
i already did these steps attempting:
system points past date of issue.

Defragged both disks just in case.

Ran CC cleaner on the registry and the standard caches.

ran scan now tool and found one issue listed below:


Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of th
Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example

cannot view log even when i give admin full access under property's.

A:long boot....unlocked system file by accident cant remember what file

How about doing a System Restore to before you made the change?

2 more replies
Answer Match 24.36%

I am using Windows 7 with 2007 Outlook. When I try to open a pdf attached file it opens up Windows Media Centre and not the file. I have Adobe 9 installed. Any ideas how I can rectify this.

A:PDF Attached file in Outlook Opens Window Media Centre and not the file.

Hi harrygas, welcome to the forum. Adobe Acrobat Reader will open .pdf files. Is that the Adobe 9 you are referring to?

The current Reader version is Adobe Reader X (10.1.2) and can be downloaded and installed over the top of the old version.

There are some excellent .pdf readers available in freeware online that are more flexible and many people prefer them, myself included. After uninstalling the Adobe Reader, I downloaded \ installed Nitro PDF Reader.


1 more replies
Answer Match 24.36%

I recently had to do a system restore and now my .jpg and jpeg files have a bad file icon. They still do open with the windows pic program as I want them to - but only on the admin accout, I usually surf and play and do everything else with a user account, and even if I reset everything under folder options for the file associacions it somehow doesn't apply to the other account.
The funny thing is that windows tells me in the file association menu that I changed the file association's properties and can set them back to standart "photo suite 6" - a program that I uninstalled ages ago ... can I somehow set this back to the normal winxp picture and fax displaying thing?

A:File opens with wrong program, bad file icon in explorer view

problem solved...

1 more replies
Answer Match 24.36%

Hi guys don't really know where to put this because I don't know what is causing it.  I was infected with cryptolocker and the 4 files can still be found in just about every folder on the computer however the infection is no longer active?  I don't get the messages anymore when I reboot/log in.
After the infection was removed everything seemed fine.  That was a couple months ago. Last night I needed a picture and I went back to get it and found out all my thumbnails are gone (they show the place holder and file name but not the picture) and the pics wont open on an entire hard drive and scattered throughout the computer.  (I localize most pics on one drive) The video files are ok though.  I have been searching the web and downloaded data repair (stellarphoenix).  Tried photo shop because I read that it would open files with bad headers.  Tried gimp.  Tried my linux box.  When I look on the network linux cannot even see the files.  Tried the following command at C: assoc .jpeg=jpegfile and get access denied error occurred while processing jpeg.  
In some folders half the files are there and half are not.  I originally noticed when I clicked on the image and got this message.  "windows photo viewer can't open this picture because the file appears to be damaged, corrupted or is too large.
Sadly this is years and years of family photos.  Naturally no system restore or backup.  : ( ... Read more

A:Corrupt jpegs error file starts with 0x06 not a jpeg file

Hello,This sounds like another ransomware infection. The real CryptoLocker was taken down long ago.Can you copy the contents of one of the ransom note? Or at least the name, so it can be identified?Regards,Alex

3 more replies
Answer Match 24.36%

Hi All,

I am having a problem with mounting an NRG flie on Daemon tools lite. I normally use ISO files but the program CD I have is a NRG file. Is there anyway to mount this image on daemonn tools lite or convert it into an ISO file. Also is there an alternative free program I can use to mount this image n a virtual drive?



A:mounting an NRG file on Daemon tools lite, or possibly converting it into a ISO file.

Daemon Tools Lite should be able to mount NRG files. Make sure you are using the latest version:
Daemon Tools Official Website:

You might also want to try these other virtual drive, image mounting software (both freeware):

Alcohol 52%
Alcohol 52% Official Website


2 more replies
Answer Match 24.36%

I would appreciate any assistance I could get, it seems I have an issue...Thank you so much in advance!

Computer is running slowly but seems to be processing constantly, freezing up when opening certain on-line sites. This has been occuring for a few days and I downloaded and ran TFC and Malwarebytes without any success. Run AVG free also. Tonight it froze and I powered it down at the power strip and upon restarting it went to a light blue screen and indicated the following (this is just parts of what the screen displayed)....

"File is dirty"
"Deleting index entry...listed multiple file #'s"
"CHKDSK is recovering lost files"
"Recovering orphaned file...then listed directory file #'s"
"CHKDSK is verifying security descriptors...."

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) D CPU 2.80GHz, x86 Family 15 Model 4 Stepping 7
Processor Count: 2
RAM: 1022 Mb
Graphics Card: ATI Radeon X300/X550/X1050 Series, 256 Mb
Hard Drives: C: Total - 233075 MB, Free - 206970 MB;
Motherboard: Dell Inc., 0HJ054
Antivirus: AVG Anti-Virus Free Edition 2011, Updated: Yes, On-Demand Scanner: Enabled

Logs are attached. Thank you again!

A:Help Please..file is dirty, deleting index entry, recovering orphaned file

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:05:10 PM, on 12/5/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.17103)
Boot mode: Normal
Running processes:
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\AVG\AVG10\avgwdsvc.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\AVG\AVG10\Identity Protection\Agent\Bin\AVGIDSAgent.exe
C:\Program Files\AVG\AVG10\avgnsx.exe
C:\Program Files\AVG\AVG10\avgemcx.exe
C:\Program Files\Creative\SBAudigy\Surround Mixer\CTSysVol.exe
C:\Program Files\Common Files\InstallShield\UpdateService\issch.exe
C:\Program Files\Microsoft IntelliType Pro\itype.exe
C:\Program Files\Microsoft IntelliPoint\ipoint.exe
C:\Program Files\BillP Studios\WinPatrol\w... Read more

1 more replies
Answer Match 24.36%

hello this morning i turned my laptop on and recieved this error message the file is possibly corrupt. the file header checksum does not match the computed checksum. I've tried using the recover cd and alt f10 but the error seems to kick in before i can do anything any ideas??

A:the file is possibly corrupt. the file header checksum does not match the computed ch

You need to boot from the CD. Enter BIOS setup and change boot sequence so that the CD/DVD drive is the first boot device. Then you can boot from the recovery CD.

Note, using a recovery CD will erase the entire hard disk and you will lose any documents, emails etc on the hard disk.

2 more replies
Answer Match 24.36%

Well just updated windows to find I now get this error message when loading up windows;


Could not load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find this specified File.

Now this is coming form ATI Catalyst, I know so cause the error message has the new CCC logo. Now what stinks is its apparently something wrong with Microsoft NET, yet I have googled the problem and tried many fixes but with no avail. Right now I am pretty
mad cause I have CCC which wont work anymore, Zune, and also my windows is freaking out. Now I have spent the last hour trying to fix this dang issue and need help as I am stuck... Please help, ANY help at all is much appreciated.
Also this was after I had to restore my system because the new Microsoft updated screwed up my system...

A:Could not load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find this specified File.


I've searched the sorttbls.nlp file in my computer, and find that this file should be a component of the .NET Framework 2.

Also I find some information in the AMD support website:

• The AMD Catalyst™ Control Center requires that the Microsoft® .NET Framework SP1 be installed for Windows XP and Windows Vista. Without .NET SP1 installed, the AMD Catalyst™ Control Center will not launch properly and the user will see an error message.
• When installing the AMD Catalyst™ driver for Windows operating system, the user must be logged on as Administrator or have Administrator rights to complete the installation of the AMD Catalyst™ driver.

Please refer:

You can try the steps below to resolve this problem.
Firstly, please go to Start Menu -> Control Panel -> Uninstall a program -> Turn Windows features on or off,

• If the checkbox of Microsoft .NET Framework 3.5.1 is not been selected, then select it and click OK.
• If the checkbox of Microsoft .NET Framework 3.5.1 is been selected, unselect the checkbox first, click OK. Then open the Turn Windows features on or off again and select Microsoft .NET Framework 3.5.1, click OK.
Then, please try to install the AMD Catalyst™ Control Center again.
If the above steps still not working, please perform the steps in this blog to fix the .NET Framework 2.0 in Windows 7: Read more

3 more replies
Answer Match 24.36%

First off, let me say that I'm not sure if I'm infected or not. But my computer has been acting suspiciously ...

I had just started up my PC and I was looking at some settings for AutoDefrag (this could have just been coincidence) when Comodo Defense+ showed me a warning. Basically, WMIADAP.exe was trying to modify a file or a registry entry (I'm sorry but I don't remembner which). I know that WMIADAP.exe is a system file, but it was in a strange location:


I stupidly allowed this, since it was before I saw the unusual location of the file.

Looking through Comodo's logs, I see that it tried to modify the file C:\Windows\System32\wbem\Performance\WmiApRpl.h

To calm my suspicions, I tried to upload WmiApRpl.h to both Virustotal and Jotti, as well as Avira's sample submission page but the Performance subdirectory containing the modified file does not show up in a "file upload" window! This really worries me.

Subdirectories of C:\Windows\System32\wbem\ that show up under Explorer:


Subdirectories of C:\Windows\System32\wbem\ as seen through VirusScan/Jotti/Avira "upload file" window


Both the Performance and MOF directories are missing in the upload file window, which does not allow me to upload the modified file Wm... Read more

More replies
Answer Match 24.36%

Dell Inspiron 1525, Vista. AVG free, Adaware, Spybot S&D. Scans done weekly, no problem noted prior to this.

Daughter called me at work bent out of shape because she gets this on startup:

" The File is possibly corrupt. The file header checksum doses not match the
computer ed checksum..." All of her summer howework is on the HDD and she's no happy. She's been warned about not having backups, but she knows everything at her age...maybe this will get her attention. She says it flashes the Dell logo at start up and then goes to a black screen w/this message.
My search here kept coming up w/"IE cannot display this page...", so I thought I would start a new entry and hope somebody might have something to offer by the time I get home to look at it.

FWIW, this is a laptop on a wifi network. AVG on another computer on this network started giving a virus alert yesterday, (mentioning smitfraud), AVG scan found nothing, Panda online scan found nothing, and Spybot found nothing. That was my project for this weekend, but I guess it goes onto the back burner now. I do not know if there is a relationship between these two issues.

Any help anyone can provide will be greatly appreciated.


More replies
Answer Match 24.36%

I have a external my book fat32 formated and a new mybook ntfs formated external as well.  Now when I copy my files from the fat32 to the ntfs external all files copy fine but some give that destination location file characters are too long, meaning that the file names are too long.  Now I could change the file names but that would conflict with programs that need that file name.  I am using vista ultimate and would like to copy all the files over from the fat32 to ntfs so I can reformat the fat32 to ntfs.  The files got on the ntfs from a simple drag and drop from my IDE NTFS internal hard drive. I hope you guys to tell me what to do. Thank you :)

More replies
Answer Match 24.36%

I'm trying to recover an entire terabyte, and I don't want a recovery software which will scrap filenames and file structures, leaving an unintelligible mess to wade through. Is there a software which will preserve file names and structures, and possibly allow me to restore only particular directories?

A:Is there a file recovery software which preserves file names and directory structure?

Hmm; Normally any backup software would do this for you.

If you had a secondary copy (say other media to which you did a copy), then this would be a snap.

It sounds as if you only have the original media and you need to recover "whatever is possible".

2 more replies
Answer Match 24.36%

Hi Ladies and Gents, my first time here.

I am trying to solve a problem where on 2 different machines refuse to open downloaded pdf's when this is selected at the open/save option after downloading. The 2 machines are both Win XP SP2. 1 is running Adobe Acrobat 7.0 (full) the other is running Reader 8.1.1.

On both, if an already saved file is clicked on it opens immediately. It is only on files being downloaded that the problem occurrs.

Any and all ideas gratefully received.


A:NEWBIE: Adobe Acrobat not opening pdf file unless file saved to disk first

Maybe a description of the error would be helpful?

2 more replies
Answer Match 24.36%

I'm trying to recover an entire terabyte, and I don't want a recovery software which will scrap filenames and file structures, leaving an unintelligible mess to wade through. Is there a software which will preserve file names and structures, and possibly allow me to restore only particular directories?

A:Is there a file recovery software which preserves file names and directory structure?

have a look at this one

1 more replies
Answer Match 24.36%

I'm trying to open in Excel 2010 a file with .exf extension that is always a pipe delimited text file. I have set, using Windows file associations, to open this type of file with Excel. But, I would like for it to recognize that it is pipe delimited, so that I don't have to click on Delimited, Other, "|" to import the file. Any ideas? I also thought about using a macro to save some steps as well. Thanks for your help!

A:Excel import pipe delimited file based on file extension

Hi, welcome tothe forum
Macro is the solution, just start the macro recorder, give it a name and do what you do, stop the recorder and you have the macro.
Simple as pie

3 more replies
Answer Match 24.36%

I am wondering if anyone can provide the equivalent to this linux script. When run against a text file with one entry per line being the name of a directory, it deletes the named directories.

On linux, I run this against the text list.
while IFS='' read -r line || [[ -n "$line" ]]; do
rm -R $line
done < "$1"

I am not sure how to make it do the same for Windows. I can do this, but I'm hoping there's a way to delete based on what's in the text file. Also, wouldn't want it to prompt for deletion of each, but to just delete.

@echo on
cd \
dir /D /N 0
for /D %%f in (XX*) do rmdir %%f /s
%comspec% /k

Thank you

A:Batch file or command to delete directories named in a text file

It's easiest to clean out the files before removing the directory.
echo Y|del *.* will clean out the files in a directory as long as there are no hidden or system files, you need to remove the attributes of files with the attrib command before the bat will delete the directory.
the echo Y| simply answers yes to any confirmation messages

1 more replies
Answer Match 24.36%

I have a HP dv7-3065dx 4 gig ram and 500 gig HD window 7 home prem 64bit. I pulled the mother board and had the GPU reballed and copper heat sink added for cooling. Now I have put it all back together and it will nor boot from factory disc or from the hard drive. I have tried a couple of hard drives including one new and one from another dv7 that is working. I have also pulled the ram and replaced it twice. I get the file is possibly corrupt. The file header checksum does not match the computed checksum and also got this error also BOOTMGR image is corrupt. The system cannot boot. Is it possible I missinstall the board causing these errors, help help!!

More replies
Answer Match 24.36%

I'm working on a batch file that will download a file I maintain, look for a string of text, and if it doesn't find the string, rename a file or folder, or change the file or folder's attributes to read-only.

I think I can handle the last part, and I already have the ftp part done, but I am having a hard time finding any good resource for the text string lookup/IF statement.

Any help is greatly appreciated. I'm new here, please excuse my ignorance if I am posting in the wrong area or violating any rules.


A:Batch file to compare text and rename file or driectory on fail

6 more replies
Answer Match 24.36%

I am trying to write a batch program the list the current directory files that end in *.dwg
into a file on my C drive.
I have used the following code:
dir *.dwg /b >C:FileListing.txt
start notepad C:FileListing.txt

This code only gives file names in the current directory.
I need to have a list of path and file names in the file FileListing.txt
Is there a way to do that without including subdirectories??

Thank you,

A:Solved: Batch file to list file names in current Folder.

9 more replies
Answer Match 24.36%

So I opened an Office Writer attachment (.odt) from an email and made edits to that document. I hit save but not save as.Tried to open the file the next day but it got deleted. I did some research and realized that was stupid and looked everywhere for advice. So I've gone into temporary internet files folder and I cant find it there. I had deleteted my internet browser history yesterday. Following some random advice on the internet I tried to restore my browsing history by downloading som index.dat reader. Needless to say I am so completely lost. I just need to know if its even possible to recover it. Im willing to goto any computer shop and pay whatever it cost at this point. Oh and the exact message I'm getting is:

C:\Users\Paul\AppData\Local\Microsoft\Window\Temporary Internet Files\Low\Content\poli352a[1].odt does not exist

A:Need a file from temp internet file but I accidently deleted browsing history

First, download the free Process Explorer.

Run Process Explorer.

Open your e-mail program (mine is Outlook Express).

Open your e-mail message.

Open your attachment (Office Writer attachment (.odt)).

Inside Process Explorer, right-click the new process (from the application used to open that attachment).

Select Properties...

Select the Image tab.

Look inside the Command line bar.

You'll see the exact path to the temporary folder created for the attachment.

Make sure to check "Show hidden files and folders" and uncheck "Hide protected system files" in Folder Options.

Only copy the part from C:\Users to Content.IE5.

Note: a new folder number is created each time you open an attachment (e.g. IGSDF94V)


"C:\PROGRA~1\MICROS~2\Office10\WINWORD.EXE" "C:\Users\Owner\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\IGSDF94V\Example.docx"

Paste that path inside the My Computer address bar and click OK.

You'll have to look inside each folder manually for the name of your document. The folder number will be different from the one you're seeing inside the Command line bar in Process Explorer.

Do not run a Search. Look very carefully inside each folder. It should be there!

2 more replies
Answer Match 24.36%

In windows Explorer files of the extention .avi will have an icon that is that little film strip with a screen shot from the video file. Matroska files (.mkv) only show a generic icon in explorer? How can i fix this so that the Matroska file will show the screen shot from the video file as is does with avi files in windows explorer? I have Home Premium? Thanks:)

A:Matroska File to show screen shot as icon like an avi file does in explorer

I wrote a similar post about mov files in here
Have a quick read at it (to understand what you're doing and why it's the way it is), then grab some matroska directshow filters. There's a list here:

P.S: Keep in mind the filter sparses the mkv file only (aka the container), it does not decode the audio or video stream inside of it. If you're only getting a filter but can't see the video, it would be because you're missing the codec (compressor-decompressor) for the video stream. I'm mentioning it because mkv files are usually encoded using codecs for which the avi container is not suitable (for example H.264 or AC3). If that's the problem, be sure to get codecs too (for example ffdshow-tryouts for H.264, or AC3filter for AC3).

1 more replies
Answer Match 24.36%

I was doing some detailed drawings in photoshop, and I also had a generic photo up in photoshop as well. I went to save my drawings, but apparently accidentally saved the photo under the drawins name and then closed the program. This morning I discovered the bad news. Is there a way to get that drawing back? I do not know if it was ever saved before.

A:Saved wrong file, closed program without saving right file, can I get it back.

Not if you overwrote the original.

1 more replies
Answer Match 24.36%

I cannot copy or paste jpeg files from my computer to my SD 2GB cards. Also, I get this msg when I try to print jpeg files. Using Adobe Elements I am able to archive these files. Oddly enough I can attach and send these jpeg files via email. Prior to August '08 was able to do these tasks without a problem. I suspect that there is a software compatibility problem since this problem came on suddenly (maybe iTunes?). No problems importing jpeg files from SD cards. I've looked at several sites on the internet but none seem to have the right solution for my problem. THANKS for any help that you can provide! -Stu

A:Error copying file or folder; cannot copy img the directory or file cannot be created

This has caught me more than once.

The problem is a limitation on the number of files and folders allowed in the root folder of a FAT16 file system (as for a memory card) of 512. (Note, this number is reduced much further if longer file names than 8 characters are used, as most people will want to).

When transferring the files onto the card, new files will be rejected when you hit this limit.

So keep your files in separate folders, so they are not all in the root folder.

For files and folders in root it might be worth keeping your filenames under 8 characters in length so you can use the full 512 files on root folder.

3 more replies
Answer Match 24.36%

Hello and this is my First Post

Can you help me with an annoying dialog that pops up when running shortcuts please?

I have (portable) applications located on E:

I can run those applications directly from E: without a problem - i.e. I don't get any warnings.

However if I create a shortcut to one of these applications and place the shortcut on the desktop ( on C: ), then running the shortcut causes an open file security warning (see attachment). The warning dialog claims it can't determine who created the file, because it comes from "a location outside your local network". Which is really strange because it is a locally installed hard drive.

The only explanation I have is I've used E: with a previous windows 7 installation on the same hardware, then I reformatted & reinstalled my Windows 7 partition, but kept E: untouched.

Couple of things I've tried are:
1) there is no "Unblock" button on the shortcut's properties dialog
2) Group policy editor changed to not preserve zone information
3) I couldn't find an exact match for this particular open file security warning when searching here and other forums

A:Open File Security Warning when file is on different local hard drive

Similar warning under Win 8, for *.lnk (shortcuts), even though they are under Favorites.

1 more replies
Answer Match 24.36%

I would like to create a .bat to copy files from source folder to destination folder.
Some files in source folder already exist in destination folder (Same name)
What I would like is that files existing in destination folder to be rename to f.eks filename_BAK.extension.
Source folder include. FileOne.asp - FileTwo.exe - FileTree.txt
Destination folder include. FileOne.asp - (NO FileTwo) - FileTree.txt
Result. FileOne.asp (version from source)(Existing renamed to FileOne_BAK.asp) - FileTwo.exe - FileTree.txt (version from source)(Existing renamed to FileTree_BAK.txt)
Now in desination folder.: FileOne.asp - FileOne_BAK.asp - FileTwo.exe - FileTree.txt - FileTree_BAK.txt
Files in source folder are placed in different folders, but in same structure in destination.

Kind regards
Søren Kromann

More replies
Answer Match 24.36%

I created this batch file to log certain users logins. It creates a text file to log in, but doesn't populate any of the data to it. Could someone please take a look at it and see what I did wrong. I'm new to writing batch files.

Thanks in advance. Here is the code.

@echo off
set target=JDoe
if %username% == target echo %username% %date% %time% %computername% >> c:\logfile.txt

A:Solved: Batch file creates text file but does not populate data to it

target is a variable. You have to surrournd it with %% like any other variable.

C:\>set target=Squashman

C:\>if %username% == %target% echo %username% %date% %time% %computername% >> c:

C:\>type logfile.txt
Squashman Fri 05/23/2008 10:34:14.74 BUMBLE-BEE



3 more replies
Answer Match 24.36%

Hi all,

I have been hammered by several viruses. The result of the attack is that Windows Explorer now shows the file type for an exe file to be a file folder instead of an application. I assume there is something not right in the registry but I do not know where to start looking. Can anyone help? Thanks very much.

A:Windows Explorer Is Defaulting "file Folder" File Type For Registration

I'm not sure this is what you are talking about, but you can change the icon:
Tools -> Folder options -> File types
Mark the file and press "advanced".

*edit stupid mouse

4 more replies
Answer Match 24.36%

Here's a wierd issue our office has been having. We upgraded the Server (Entire Unit w/Server2003 SBE) a while back and installed McAfee AV v9 on all our PCs (All updates done etc). I have disabled Worm Blocking on all the McAfee AVs (AVG is installed on the Server).

The reason we disabled the McAfee Worm Blocking is it doesn't play nice with networks and we were having tons of issues.

*We still get the occasional random file going missing or getting changed to what seems to be a temp file. Example: file.xls is opened gets worked on then gets saved. Go back to see the file and find it's been changed to ~file.xls or sometimes just ~74389758943file.xls.tmp or some junk. Sometimes can get it back by just renaming othertimes it's toast and cannot be fixed. This seems to be with .doc and .xls, not sure of others since they mainly only use excel or word files.

Any ideas? Anyone seen this issue. These files are stored on the Server and for the most part opening, working on and saving has been fine. Seems to be random and effects everyone not just one particular person.

A:Network File issue: saves back as temp not the real doc/xls file???

8 more replies
Answer Match 24.36%

Basically the title. Almost every single time i move ANY file or delete any file, the window im in freezes and the progress bar freezes. Now when i create a new folder the window im in freezes also, but i'd say its only 50% of the time. The temporary solution i found was to go to the task bar, end explorer, and restart it using run. Now when i check back on that folder, whatever action I did (ie delete file) does do what i wanted, its just the freezing. I'm looking for a permanent solution to this and any insight would be greatly appreciated.

A:Create New folder, move file, delete file. Explorer Freeze

Hi erod49, try looking in your error logs. You have given a good discription of the problem. Tel us your system specs as well.

To get into your error logs,

Left Click on Start Menu.
Right click on Computer and choose manage.
Click on the event viewer.
You now have loads of options to try and pin down what is happening.
Expand the error tab.
Look for things in the last 24 hours.

Other things to look for are updates, has an update caused this. Has your computer autoupdated any of the motherboard drivers.
Have you tried to restore the computer before the error started or has it always been like that.

10 more replies
Answer Match 24.36%

Hi All,

I am having a problem with mounting an NRG flie on Daemon tools lite. I normally use ISO files but the program CD I have is a NRG file. Is there anyway to mount this image on daemonn tools lite or convert it into an ISO file. Also is there an alternative free program I can use to mount this image n a virtual drive?



A:Mounting an NRG file on Daemon tools lite or possibly converting it to an ISO file

Duplicate post. You have the same one here -

1 more replies
Answer Match 24.36%


I'm wondering if anyone can tell me how to make the 'Libraries' folder structure appear when doing a file open file save. In both case I can see the folders labeled Desktop, Documents, Downloads, etc. but I cannot see the Libraries folder.

Is this possible? How?

Thank you,


A:Solved: Question: How to see libraries in the File Save/File Open form

12 more replies
Answer Match 24.36%

Receiving forwarded emails as attachments in Gmail. Only 2 options to access, View Text and Download.
Download doesn't work since there is no file type extension. View Text not acceptable since images can't be seen. Any ideas on how I can open this file in Gmail or convert it somehow.?

A:Solved: Gmail: no file type on attached file which is a forwarded email

7 more replies
Answer Match 24.36%

Problem Steps Recorder Error - You do not have the necessary file-system permissions to create the specified output file.

More replies