Tech Problem Aggregator

Green Screen - BSOD and Dual Screen Monittor Dell Latitude 630

Q: Green Screen - BSOD and Dual Screen Monittor Dell Latitude 630

Recently i started getting a green screen and a dual screen on my monitor. The system works fine but dual screen and the green makes it hard to read. Sometimes it works fine when i run diagnostics for couple of hours but now even that is not working. when everything works fine the system automatically shuts down giving a blue screen (BSOD). when i checked the problem and solution i got the below message that thr are 47 problems. Please suggest me something.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090525-1315.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1848.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1802.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1632.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1454.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1454-01.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1444.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090522-1641.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090522-1639.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090522-1636.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090522-1626.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090522-1425.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090521-2053.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090519-1215.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090518-2107.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090516-0835.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090516-0833.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090515-1515.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090514-1458.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090512-2131.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090510-1000.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090509-2024.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090509-1925.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090504-2046.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090504-1941.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090428-1047.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090427-1115.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090426-2224.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090426-1008.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090425-1304.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090423-1840.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090423-1344.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090417-1528.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090525-1315.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1848.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1802.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1632.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1454.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1454-01.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1444.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090522-1641.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090522-1639.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090522-1636.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090524-1441.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090509-2108.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Video hardware error
Files that help describe the problem:
WD-20090522-1619.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Windows
Problem: Shut down unexpectedly
Files that help describe the problem:
Mini050709-01.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

A: Green Screen - BSOD and Dual Screen Monittor Dell Latitude 630

Uninstall the video driver from safe mode either from add or remove programs or device manager.

reboot back to normal and install the update display adpater.

2 more replies
Answer Match 103.32%

Hi everyone; I have a dell D630 that I started having problems with about 2 months ago, in the middle of normal functions vertical rows of small green bricks would appear, followed shortly by a crash. Then, I can power it back up but the screen will remain black. It lights up, the pixels are obviously functioning but it is black. Every once in a while it will work again but only for about 1-5 min and the green lines will come back.

This happened shortly after I had it outside during a construction project where it may have gotten some dust in it or something... I am guessing this is relevant?

I have tried blowing everything with a little keyboard cleaner air can, but that is all.

Any help would be great.

Thanks,
Ben
 

A:Green lines/bricks, crashes, powers up but no screen display. Dell Latitude D630

Hi bbblades222,
is that onboard video, or a card? the green lines,bricks, etc sound like an overheating problem, most likely vram. also you indicated that you had to recently move your machine, try re-seating your graphic card (if you have one) . and welcome to Techspot
 

1 more replies
Answer Match 91.14%

I have my power scheme set to the defaults when on battery power, but all power and screen settings to "Never" when plugged in and charging. The 9 cell oversized battery is in good working order. I have an administrator and user password set and I also have it set to flash the password screen upon waking from sleep mode. Yet, if I leave the running machine unattended for a time, I return to find it at the blue password login screen. It's not sleeping because all the processes are working in the background, even downloads are not interrupted. If I login, it goes right back to what it is doing in the background, so there's no delay or loss of data. It's just weird and disconcerting. Anybody know what I set to cause this? I've had many Dell's and Windows OS, but have never seen this behavior before.

Dell Latitude E6510
Windows 7 Pro 32 bit SP1
BIOS A16
New HDD Seagate Momentus 500GB 7200 rpm
Just Clean Installed new OS on new HDD, all updated no problems, runs perfectly

Chipset
-------------------------------------------------------------------------

Northbridge Intel Havendale/Clarkdale Host Bridge rev. 02
Southbridge Intel QM57 rev. 05
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 4 GBytes
Channels Dual, (Symmetric)
Hardware monitor Battery
Voltage 0 12.56 Volts [0x3113] (Current Voltage)
Capacity 0 9... Read more

A:Dell Latitude goes to Blue Login Screen unexpectedly NOT BSOD

Hi my first thought that it went into hybernating. But you would have to move mouse or press a key to wake it so do not think it's that. But you could check anyways.

2 more replies
Answer Match 88.62%

Hello,

My laptop: Dell Latitude E5550 - 15.6" FHD - Core i5 5300U - Intel HD Graphics 5500 - Windows 7 Pro 64-bit - 8 GB RAM - 500 GB HDD.

Does anybody know what drivers/software is responsible for displaying On Screen Volume and Screen Brightness Indicator (while pressing Fn+F2,F3,...) ?

What I've found so far that the Dell QuickSet may does the work (link to this solution: No Level Indicator When Using Keyboard Audio Volume Controls), but I couldn't find a compatible version of this soft with Dell Latitude E5550.

More replies
Answer Match 82.32%

Hi,
Greetings!
I would like to ask for your assistance because I'm already out of ideas how to resolve this issue. Right after I powered up the laptop, it will get past the DELL logo screen, then it will be completely just black screen. I wouldn't even hear any activity from the CPU fan, HDD and pressing the Caps Lock doesn't lit up the LED. The LED indicators on the side are only displaying the power indicator, but none for HDD, Battery and Wireless.
Here are the steps that I have done so far:
1) Removed the HDD and Battery, then press & hold the power button for at least 45-60 seconds to disperse the internal voltage. Then attach the Battery, but not the HDD.
2) Press and hold Fn and then the Power button, hoping to boot me up to the ePSA Diagnostic Utility
3) Press F2 or F12 while booting up
4) Re-seat the memory and also clean with a dry tissue
These are the procedures that I have done but nothing has changed. It still displays blank screen right after the DELL logo.
I do hope that you could assist me on this. Thank you so much!

More replies
Answer Match 81.9%

New computer
4 gigs ram
dual8800gtx 1000 watt power

I start a game and all of a sudden I get a green strip down the left side. Help please
 

A:Green strip down screen dual 8800gtx help!!

6 more replies
Answer Match 80.64%

What do you do if your Dell Latitude w/ 233 processor won't offer you a set up screen? The laptop works fine..but at start up....pressing fn +F1 or F2 doesn't put you into set up mode? Thanks! Bill
 

A:Dell Latitude Set Up Screen

9 more replies
Answer Match 79.8%

Hi,

I have a dell latitude d630 running windows 7. The screen has a horizontal line running through the middle and the same screen shows at the top and bottom. Any help is appreciated.
 

More replies
Answer Match 79.8%

Hi,

My Dell Latitude LS screen has a vertical single pixel width line where the pixels only show the color neon green or some flashy green shad only. Is there a way to fix those pixel. In the strict sense these are not dead pixels because they do light up but they do not show anything. I have found websites suggesting, I squeeze, or massage that particular area of the screen while the LCD is on and off and then on. But that does squat for my laptop. Does anyone have any suggestions or may have come across a similar problem. Thanks in advance.
 

A:Dell Latitude LS LCD Screen Probs

Hi and welcome to Techspot. Is the laptop within warranty? this sounds like something Dell would replace.
 

1 more replies
Answer Match 79.8%

Hi There
is there anyone out there that can solve me Dell D 600 screen problem as it doesnt seem to power up, all the base powers up ok but not the screen, any ideas or is it an expensive repair or exchange.
 

A:Dell D 600 Latitude Screen Problem

I don't know about laptops, but my desktop LCD monitor acted the same way - only black screen with power light blinking, but the computer was booting up properly. The monitor is still under warranty, (3-year warranty) so I sent it in for repair (at a shipment cost to me of $30). From what I could learn on the web, LCD monitors often suffer from capacitors going bad among other things. I don't know how much repairs cost, however several sites indicate it is fairly expensive just to work on them - from $115 up. See link for one price list of repair.

http://www.moniserv.com/doc/pricelist.html

I hope yours is still under warranty. Good luck!
 

2 more replies
Answer Match 79.8%

I have a couple of problems with my new college laptop, a latitude D810. Every time I startup my computer, windows seems to be shuffling through the resolutions, starting in 800x600 to the standard 1680x1050. This wasn't a problem until recently, when after I updated the drivers (from the dell website), windows keeps getting stuck in 800x600 coming out of hibernation.

(On a side note, I also think this is making my welcome screen and everything on it ENORMOUS. When I was setting up Windows the first time I fired up the laptop, I couldn't even see the next and finish buttons!)

Another problem is that the display properties requires that I reboot after every resolution resize I try to apply the settings. Now, I clearly remember I didn't have to do that before.

Thanks

PS-Keep the explanation simple for now, I have no idea how advanced this might get.
 

More replies
Answer Match 79.8%

i recently purchased a second hand dell cheep
and now the display has kinda blue lines through it
i have a dell inspiron 4100
they are both model# PP01L
is the actual display the same
will the mobo interchange from one to the other?
it seems a waste to forfeit both computers when one is a two ghz system
i would rather put the mobo in the inspiron, it looks cooler but, form follows function
i know that there are enough dells out there saturating the market somebody has replaced or noticed its similarities such as the connector from the display or mounting socket
or it's if it is the display, maybe i can swap them out.
im thinking its the actual piece of tape or ribbon connector
but the inspiron has a smaller board that connects to the mobo
i dont know as of yet whether they will interchange.
on the outside there's not much difference
what do you think
as always thanks
 

A:Dell Latitude screen issues

eyemfedup2 said:





but the inspiron has a smaller board that connects to the moboClick to expand...

The latitude should also have this "Inverter" board, if they are different then its likely they are not interchangeable
By the way, I suspect the orange flat ribbon cable only
 

9 more replies
Answer Match 79.8%

Dell Latitude CPi, Win 98 se, Screen displays wide black curvy lines, looks like static, sometimes very bad, sometimes a little . Can run for hours ok, then starts to show, or can start at boot up. I was told that if battery was not up to par this could happen, ran on ac only, battery only, combo still same results. Any suggestions will be appreciated Thanks Paul
 

A:Dell Latitude Screen Problem

7 more replies
Answer Match 78.96%

I have a Dell Latitude D820 that I dropped while in its carrying bag so it wasn't a real hard landing.

Now the backlight won't come on. I swapped an entire screen assembly from an identical D820 and it still won't turn the backlight on. I swapped the screens again and the borrowed D820 still works fine and mine won't work. (I didn't bother to test my screen in the borrowed D820.)

I can run an external CRT with mine and I can see the LCD display if I shine a light on it so I know the display is working and not cracked. The laptop won't drive the CRT unless it thinks the lid is down so, to use the keyboard, I removed the sense magnet from the lid and taped it to the place where it would be with the lid closed.

I've noticed in the past that this D820 often stayed fully on, including the display it seemed, when I closed the lid and walked away for hours.

(Note: When I tested the borrowed screen I had the sense magnet removed.)

When the magnet is taped in place (simulating lid down) both the backlight and the display are off. I can't see the display even when a light is shined on it, but when the magnet is removed (simulating lid up) I get the display with no backlight.

It seems like the display knows whether the lid is up or down, but the backlight seems to act like the lid is always down. Is this possible? What should I look for?
 

A:Dell Latitude no backlight even after screen replacement

Did you replace the backlight inverter?
 

16 more replies
Answer Match 78.96%

I just reloaded windows 98 back on computer, after formating and partitioning hard drive. now my screen resolution wont go higher than640x480. I have windows xp on seperate partition and the resolution while in xp is fine. when i check the properties of the adapters/drivers, they are different. setup says my display is for a ati radeon mobility but i cant find a adapter/driver that will work in 98.
 

A:dell latitude c610 screen resolution

You have to install your video card drivers. go to www.ati.com and select the "Drivers and Downloads". You should be able to find a copy there. If not, go to www.driverguide.com and sign up. It is free and offers thousands of drivers. You will find it there if nothing else.
 

1 more replies
Answer Match 78.96%

A new Dell Latitude, Win 7 ( seems diff version from my older inspiron.) Anyhow, capturing audio, via Audicity, from youtube album track 'videos'. Every once in awhile, ?random? , the screen will flash, like the flash on a camera! I have postit notes over the camera and mic's. ANY clues what causes it ( and how to prevent it ) Thanks any and all.

A:New Dell Latitude screen flash - because you'se guys know all

I would be contacting Dell. That sounds more like a hardware problem.

2 more replies
Answer Match 78.96%

I am trying to fix a friends Dell D600 Latitude Laptop.

They are not very good with computers, and they thought it had a virus so gave it to me to look at.

But when i try to turn it on all the lights light up and it makes a sound like it is going to boot, but doesnt actually boot up. The screen is completely blank. I have taken out the memory and put it back in, tried pressing every F button and using Fn which some people suggested online.

But nothing works, i have also tried putting in the XP disc and also connecting it to another monitor and pressing Fn +F8 but still nothing.

I don't want to give up on it. :(

I am not a computer expert but it makes a noise when i press it on, so to me it still has life

Is there anything i can do??

Thanks.

J

A:Dell Latitude D600 black screen.

Hi and welcome to TSF can you get to the bios by tapping the del key or enter key when booting

4 more replies
Answer Match 78.96%

Windows 7 64 bit pro installed. Actually the computer often suddenly restarts without a reason. Today got a blue screen. I followed your instructions and collected the attached files. It would be highly appreciated if you can help in any way.

A:Got blue screen in my Dell Latitude laptop

Hi -

The 3 BSODs are USB related.

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or BSOD.

Upon BSOD, re-run the jcgriff2 BSOD app - http://www.techsupportforum.com/foru...ta-452654.html

Also, run Speccy - http://www.filehippo.com/download_speccy
- "File" | "Publish Snapshot" | Paste URL into your next post

Regards. . .

jcgriff2

`

BSOD SUMMARY

Code:

Debug session time: Wed Oct 17 14:45:49.546 2012 (GMT-4)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\101712-16489-01.dmp]
Built by: 7600.17017.amd64fre.win7_gdr.120503-2030
System Uptime: 0 days 0:20:30.888
BugCheck D1, {fffffa000bad0018, 2, 0, fffff8800427a075}
*** ERROR: Module load completed but symbols could not be loaded for usbehci.sys
Probably caused by : usbehci.sys ( usbehci+6075 )
Bugcheck code 000000d1
Arguments fffffa00`0bad0018, memory referenced 00000000`00000002, IRQL 00000000`00000000, value 0 = read operation, 1 = write operation fffff880`0427a075, address which referenced memory
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xD1_usbehci+6075
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Mon Oct 15 05:35:49.701 2012 (GMT-4)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\101512-15834-01.dmp]
Built by: 7600.17017.amd64fre.win... Read more

10 more replies
Answer Match 78.96%

Hello, im new to the forum.

i currently own an older dell latitude cpx laptop, its fairly outdated, i know but im currently running it off of my wireless router, i have a d-link wireless-g adapter in my pcmcia slot, but when i boot my laptop with it, i get blue screen errors, but if unplug it and boot it up then plug in my adapter, it works perfect, i know its not a big deal to just plug it n after i boot up but i was wondering if i could fix this?? the laptop has xp pro sp 2

thanks in advance
 

A:Dell Latitude cpx, blue screen at start-up

Look for type of error on the blue screen and write it here.
 

1 more replies
Answer Match 78.96%

hya
i have had my dell latitude for about 2-3 years now and over the last 3 weeks the screen (if not put in one certain place) turns white from the top left corner on words . i believe that the LCD screen has be dislodge from the bottom but people have said that it may be the graphics card. i need help please. also, i have heard that if i atatch a moniter to the laptop and the problem continues it is quite possibley the LCD screen. i dont know what to do. i can not tell my mother becuase i will be shouted at for " breaking" it but it is not my fault.
if you could tell me how this has happend and how to fix it i will be forever greatful
thanks
Technoob2011
sorry if this is in the wrong section
 

More replies
Answer Match 78.96%

I have a 3 year old dell latitude d830 and everytime i turn it on the screen goes pink with a variety of thin colourful vertical lines through it. This is as far as it goes, i cannot get it to go to the regular start up screen or any other.
I know the battery is currently fried so i have to keep it plugged in for it to work, could that have anything to do with this? or is it another matter?
Thank you.
 

A:Dell Latitude D830 does not go further than the start up screen

Maybe u should try remove the whole battery and then plug the charger directly, if your pc turns on with the same issue, then it's not the battery.

Try to plug your laptop to an external monitor. if the display is normal on the external display then your screen is bad.
Check to see that there is no other sign of abnormality, such as after-POST beep or the activity LEDs.
I hope it should be this.
 

1 more replies
Answer Match 78.96%

Hello!,
Is there any hope to recover data from this laptop? It is a Dell Latitude D620. I get a blue screen even if I try to reinstall Windows XP . The blue windows appears as soon as the laptop tries to install the CD on the hard drive. I ran the diagnostic test and get three error codes: 0F00:1A44, 0F00:0244, and 0F00:075D. Is this a dead hard drive?.....or, is this just something that can be fixed or classified as "software related"? Thanks for your help!
 

A:Blue Screen on Dell Latitude D620

What test generates the codes?
Have you run the HD test?
 

3 more replies
Answer Match 78.54%

My laptop screen has green and pink tint all over it. It started about a month back and is increasing ever since. Moving the screen helps, but lately it has become difficult to get normal screen at any angle. Thanks for the help.

A:Dell 3537 - Screen with green and pink tint

Hi ANON2K16,
Do you see the distorted colors from the time the system is powered on or does it occur at random intervals of time? 
Restart and press f2 on startup to enter BIOS - check if the distortion is seen while in BIOS.
Check if the distortion is seen here - Run the LCD bist - Turn off the system and press and hold the "D" key + power button to turn on the system and it should run the LCD built in self test -  swivel the screen back and forth and see if the distortion is seen at all times - see this link for more info - http://dell.to/1SkXNrG
And here - Restart the system and press f12 key on startup - choose diagnostics. Let it run the diags and if you encounter any errors - make a note of the complete error and report the same to us.These are onboard diagnostics and they might possible pick some error if the hardware is not functional.
Connect an external monitor and check if the distortion is seen on both the external display and the LCD.
Also, please click my DELL-username and write me a private conversation with the service tag and your contact details(Name and Email) for case records.
Let us know if you have any other queries.

1 more replies
Answer Match 78.54%

I have a Dell XPS M1730 with Intel Centrino and Vista that suddenly started blinking solid colors, I thinkred reen blue. Soon before this happen I was having issues when using a video player, Z Video. I just put the glitches off to having Vista. I also downloaded a font from an unreliable source, yes I know, and then Avast said it detected a virus and moved it to the vault then Avast said I was all good. Well a little with later it just started blinking red...green..blue...red...green... I could be off on the order. I pressed Escape and it stopped. Then a few minutes later it happened again and Escape did not stop it. Ctrl-alt-Escape did nothing. I hit the power button and after a few seconds it the blinking stopped and the regular shutdown process began , I saved my work allowed the programs to close and it shut down. I think I should try and restart in safe mode but I am afraid of a virus doing more damage though I suspect (hope) its just a driver issue. I am not under warranty and really need this computer to work so any help fixing this problem will be amensly appreciated. .
 

More replies
Answer Match 78.12%

Today, I was (trying) to upload files on a Micro SD card. I went to "My Computer" and clicked the storage device. It stopped responding, so I ended the program. All the icons disappeared, so I shut down the laptop. When I booted it back up, it did the little windows thing with the logo and blue bars. It then asked me "Start Windows Normally, Last Known Settings, Safe Mode with Command Prompt, Safe Mode with Networking, and Safe Mode." I selected "Safe Mode" and it flashed a Blue Screen error and went back to the Windows logo with blue bars scrolling. I then tried selecting all the other options. It still would flash the blue screen error. I need help!

A:Blue Screen Error - Dell Latitude D800

If it won't boot into Safe Mode, some of the XP core files are corrupt or there is a hardware issue. Try booting from your XP CD and perform a repair.

5 more replies
Answer Match 78.12%

Woke up the computer and all I got was a black screen and a white arrow (mouse cursor). Safe Mode all Version Give the Same. Can only use the computer from bootable media and the repair option under F8. Not sure what programs I need to download / run. Typing this on a different computer. Ran Superantivirus from a Hirens Boot USB and it found things on drive "X" ( likely false positives) and the cookies. Last working did not change anything. Awaiting your answer.

More replies
Answer Match 78.12%

my dell latitude e6420 screen goes blank and stays blank when it has to boot from the internal hhd or usb or even cd, i can not even run diagnostic test. all my laptop can do now is go to Bios settings. it turns and stays blank when not at bois. plz help me...very urgent.

A:my dell latitude e6420 screen goes blank when it has to boot

Hi notyme,
Welcome to the Community.
Unplug the adapter and the battery. Press and hold power button for 20 seconds. Plugin the adapter. Press and hold “Fn” key while turning on the system. Hold it down until the diagnostic starts. For more information click the link mentioned below:
http://dell.to/RO1v0p
Please refer to the link mentioned below for information on error codes:
http://dell.to/12IFoz8
Thanks & RegardsManshu S#iworkfordell

27 more replies
Answer Match 78.12%

Hey all,

A few months ago I got an old 400mhz dell latitude (model PMP), just to be able to program pi micro-controllers at school. So I didn't need much power or a cd or floppy drive or any thing special so I just got this little striped down $100 one on ebay.

I got all the software and drivers I needed to program, and It was working great, but since it was old the battery would only hold a charge for an hour or so and shut it self off.

One day me and my friend decided to just turn it back on (impatiently) after it shut off, and it came on, and stayed on for an hour or so. I thought this was great and I could just do this all the time, but of course after a hour or so it just died from loss of power.

Any way when I plugged it back in and turned it on it booted up to a completely grey screen, and thats what it has done ever since. Now when you turn it on it makes one short little click and brings up a grey screen, (no bios screen or password prompter once so ever) and if you wait about a minute or so it beeps 2 times and restarts and does the same thing over. I tried cntl+alt+del, cntl+alt+enter, hitting the button that brings up the bios and even taking it apart and unplugging the cmos battery and nothing helps.

I realize that this thing is just a old piece of junk, and I did something really stupid but I would still like to get it working again (mostly out of curiosity.) Like resetting the bios or something.

Any help is Much! Appreci... Read more

A:Dell Latitude boots to total gray screen

This is a laptop right? Have you tried connecting and external monitor to see if it displays properly? Maybe the system RAM has died
 

4 more replies
Answer Match 78.12%

The screen panel hinges on a Dell Latitude C610 I have are EXTREMELY loose. Everything else about the system is perfectly fine, it was my main computer for about ten months. But if the screen is not propped against a wall or something, it will fall open or fall shut every single time. Balance the screen in a perfectly vertical position, sure, but if someone walks by or closes a door it will fall open or fall shut. Really annoying. People have actually told me to use duct tape or super glue. Is there an easy, step-by-step guide to (ideally) fixing, or (if not) replacing these hinges? Thanks in advance
 

A:dell latitude c610 really loose screen hinges

http://support.dell.com/support/edocs/systems/latc610/sm_en/index.htm

Or, more specifically:

http://support.dell.com/support/edocs/systems/latc610/sm_en/display.htm#1001090
 

1 more replies
Answer Match 78.12%

Hello,

When I start my Pc, the splash screen appears and the the bar at the bottom of the screen fills up as normal, then it starts again and continues in this cycle.

Any ideas!
 

A:Dell Latitude D830 splash screen keeps reappearing

Failed hard drive
 

1 more replies
Answer Match 78.12%

Hello!
I have just purchased a Dell Latitude E5450 14" and I am having some problems with its screen.
It is a matte IPS full hd screen and after using it just for a few hours i had enormous eye strain- happened for the first time in my life (my eye sight is just fine btw). I did calibration and tests and adjustments and updated dell drivers... Still I have enormous eye strain. (back home i also own viewsonic matte ips 23" monitor and never had problem with looking at it for hours)
The only thing I can definitely say is that I think the screen has sharpness issues based on:
www.lagom.nl/.../sharpness.php
it fails this test miserably and according to this test, the sharpness is too low. Could this be causing my eye strain and if yes, is there any way to improve that??
I am surprised that my 8 year old Dell Inspiron 13" almost passed this test perfectly.
Also I find the colors on Latitude screen too saturated.. And I have the feeling there is too much magenta or even blue...
Did anyone have same or similar problems? I really like my new Latitude but I don't see the point in keeping it if I cannot use it more then 2 hours per day...
Any help is really appreciated!

A:Problem with Dell Latitude E5450 14" screen

I forgot to mention that I have an integrated graphic card - Intel HD Graphics 5500
Upon reading Intel forums, I found out that one user was complaining about the same thing, but after apparently updating his drivers (on Lenovo ThinkPad). When he reinstalled the old drivers, the eye strain was gone.
So I disabled my Intel Graphics drivers - e voila, no more eye strain!
Still though, that sharpness test is failing....
Any thoughts?

4 more replies
Answer Match 78.12%

Hi, my dell laptop won't boot. no beep codes, and I have 2 different LED POST codesWhen charger is plugged in the code is
ON-FLASH-ON or SOLID-BLINKING-SOLID
When charger is unplugged, battery only:
ON-FLASH-FLASH or SOLID-BLINKING-BLINKING (the blinks are not the same time, they alternate)

And after some time of trying, the laptop will boot but error will be shown which is this
if I run the diagnostics, result will show that memory is okay, but it will fail the test when it is testing the hard drive.

Is this a motherboard problem? I tried re-seating the RAM but same problem with occur.

More replies
Answer Match 78.12%

I'm trying to help a friend with his Dell Latitude D410 Win xp pro. I'm a rank amateur, but know enough to get myself in trouble...
     This notebook has no cd/dvd drive or floppy drive, just usb. When you power it on, goes past the DELL splash screen then comes up to 'windows did not start successfully", blah, blah blah, and gives me the choices of safe mode, with networking, with command prompt, last known good config. or start windows normally = tried them all and it keeps coming up to the BLUE SCREEN OF DEATH "0x0000007B (0xF8895528,0xc0000034,0x00000000,0x00000000).. I even swapped in a known good hard drive and came up to the same BLUE SCREEN OF DEATH.  I removed the D410 original hard drive and tried hooking it into my main Dell Studio XPS wind 7 computer to try to access the file system = it did not "see" the drive. I then hook it into a good running Dell D610 Win xp laptop, it took a good number of minutes for the drive to show up, but I couldn't access it. I did double-check the "known good" hard drive by cabling it to other computers and was able to access with no problem and then returned it to it's rightful place in it's properly running laptop. I did a search for "Create bootable USB drives the easy way" and downloaded  "RUFUS"  http://rufus.akeo.ie/ , but when I plugged in the RUFUS loaded usb, hit F12 to boot menu, chose USB, "invalid or damaged bootable partition" came up.   Any ideas?

A:Dell Latitude d410 - blue screen of death

Do you have all the updates? 
Some BSOD can also be caused by malware/virus infections. 

8 more replies
Answer Match 77.28%

My Dell Latitude D630 freezes and has green vertical lines and also a wide line about 3-4 inches wide when i reboot. The laptop wont even load anymore. I am hoping that it is the video card or something. I have tried everything but have ran out of ideas. Any suggestions or advice would be greatly appreciated!!!
 

A:Dell Latitude D630 freezes and has green vertical lines

Safe Mode doesn't load, either?
 

4 more replies
Answer Match 77.28%

Hello!
I have problem with unable video from buil-in screen. I used external monitor with last driver video adapter (10.18.14.4432 ,A17) - it works, used earlier drivers - it works, buil-in screen - not works.
Used drivers from site dell and with utility Intel Driver Update Utility (Version: 2.6.1.4)
BIOS version A13
P.S. Called to Dell. Service engineer dell to replacement motherboard and said to find another drivers.
But where I can to found another drives like not from Dell and Intel?
Please help. Thank you for any help.

More replies
Answer Match 77.28%

My dell latitude is showing strange colors across the screen and there are lines going up and down sometimes. When I restart the computer the loading windows screen shows up as normal but when it gets any further it is all messed up. Any suggestions how to fix this? I checked the control panel and everything seems to be fine there.

More replies
Answer Match 77.28%

The split screen starts when the laptop is powered on. I have uninstalled the video card, didn't work. I have clean installed Windows10 and formatted the disc, didn't work. I have went all through the settings and control panel. I have looked at all options in the BIOS setup. Is there a way to to factory reset, not restore, from an iso file to before any windows os was ever installed? I am extremely frustrated with trying to find a solution on my own so I am asking the community for help. If you know of a solution please let me know. Thank you.

More replies
Answer Match 77.28%

I'm not actually trying to install a new Windows,What might be the cause to this problem and what are the solution to fixing it? Thanks ahead.

A:Blue Screen STOP = 0x0000007B Dell Latitude E6430s

It isn't clear what the problem is - are you in fact reloading the OS?  Or does the blue screen come up spontaneously?  If so - when?  At boot?  At random?
The leading suspects for blue screen stops are failing hard drives or bad RAM - run an extended system diagnostic (F12 at powerup).  If you require further information, post any error codes that arise.

1 more replies
Answer Match 77.28%

hello my friends got a quick question for you i have a dell latitude e6430 i wiped it stuck on a fresh windows 7 and well all going great apart from one small problem when i plug in and out my ac power jack the screen goes black for a second or 2 it happens when i plug in and pull out both dont know what is causing this do u have any ideas

A:dell latitude e6430 screen gose black for 2 seconds

Hello Joseph mate I take it this is not your main machine or at all? The Dell site as always not helpful but I would suggest downloading and installing the driver for the graphics from Intel https://downloadcenter.intel.com/sea...+graphics+4000
I always use manufacturers site rather than the Windows feature because I am not so sure it is that reliable. Now you might get a message that says the download is older than what is installed and in that case leave it.

7 more replies
Answer Match 77.28%

Hi everyone, I recently closed the lid on my laptop a little too hard (although nowhere near hard enough to damage the screen, at least I thought) - however it now has a crack in the corner. That will teach me for being heavy handed.

I'd like to buy a replacement screen and fit it myself, but I am struggling to find the correct model and part. I could take it to a local shop to repair but it will cost me twice the price and I have been inside electronic equipment before so I think I should be OK.

Can anyone help me determine what screen I need to buy, or where I can find out - and also if there are any online video guides to help with this sort of job?

Thanks for reading
 

A:Solved: Replacement screen needed for my Dell Latitude E5400

7 more replies
Answer Match 76.44%

The other day, I started having a problem with the screen on my latitude d610 laptop. After awhile of being on it would turn off. Not the laptop itself, just the screen (I know this because I can hear the audio coming from the task I was working on). This problem got progressively worse and now when I turn the screen on it only flickers on for about a fraction of a second before going back off.

I'm not entirely concerned with getting that fixed (although, if you know what the problem is, please do let me know). My main concern is the fact that I cannot get an external monitor to work. I have plugged in the VGA cable into my laptop and the external monitor and then I hold down the "fn" key and press the "CRT-LCD" button, but nothing happens. There is no problem with the VGA cable I'm using or the monitor I'm trying to use, because I tried troubleshooting with another laptop and was able to get it to work on that second laptop. The only thing I can think of is that maybe my d610 is not recognizing the VGA cable/external monitor, because after plugging the VGA into my d610 I do not get the "device is connected" chime that I would normally hear after connecting a device.

If you have any advice for me on what my problems could be or anything you think I might be able to do to try to correct the problem, I'd certainly appreciate it.

Thanks.
 

More replies
Answer Match 76.44%

I'm able to get to a command line from a Win 7-64 retail install disk - and have tried sfc /scannow but it hasn't fixed it - 'Windows Resource Protection did not find any integrity violations'
If this is in the wrong forum please advise
- not sure if that's because it's started from outside the original OS - awaiting delivery of recovery media shipped from Dell -
- farbar recovery scan tool log below
 
Scan result of Farbar Recovery Scan Tool (FRST.txt) (x64) Version: 15-04-2015 04
Ran by SYSTEM on MININT-MM3RG1V on 16-04-2015 13:57:09
Running from F:\
Platform: Windows 7 Professional Service Pack 1 (X64) OS Language: English (United States)
Internet Explorer Version 9
Boot Mode: Recovery
 
The current controlset is ControlSet001
ATTENTION!:=====> If the system is bootable FRST must be run from normal or Safe mode to create a complete log.
 
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/
 
==================== Registry (Whitelisted) ==================
 
(If an entry is included in the fixlist, the registry item will be restored to default or removed. The file will not be moved.)
 
HKLM\...\Run: [Apoint] => C:\Program Files\DellTPad\Apoint.exe [611192 2011-07-20] (Alps Electric Co., Ltd.)
HKLM\...\Run: [SysTrayApp] => C:\Program Files\IDT\WDM\sttray64.exe [525312 2011-01-25] (IDT, Inc.)
HKLM\...\Run: [Broadcom Wireless Manager UI] => C:\Program Fil... Read more

A:Black screen of death on Win7 64 dell latitude e6520 laptop

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/573468 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

2 more replies
Answer Match 76.44%

Hi All,
I'm a newbie to this forum and I have what appears to be a serious issue

When booting my Dell Latitude E6410, there is a really loud noise coming from the left side of the computer (what i think is the fan?). It's also very hot and the login screen freezes and I am unable to login)

I am however able to login in safe mode no problem and there is no noise or excess heat.

I thought that maybe the problem was related to my use of the Anti-Virus program Avast, so I uninstalled and used their uninstall utility.

I also ran MalwareBytes and Super Anti Spyware per other suggestions I had seen in forums.

I'm copying my list of installed programs below---I allready cleaned out all of the temp files and deleted anything that seemed iffy or not in use.

Please any help would be hugely appreciated. Thanks!

32 Bit HP CIO Components Installer
Adobe AIR
Adobe AIR
Adobe Community Help
Adobe Community Help
Adobe Flash Player 10 ActiveX
Adobe Flash Player 11 ActiveX
Adobe Flash Player 11 Plugin
Adobe Media Player
Adobe Media Player
Adobe Photoshop CS5
Adobe Reader X (10.1.3)
Advanced Audio FX Engine
Apple Application Support
Apple Mobile Device Support
Apple Software Update
Bing Bar
BioAPI Framework
BitTorrent
Bonjour
Brother MFL-Pro Suite HL-2280DW
Browntech Image Plugin
Cisco AnyConnect VPN Client
CyberLink PowerDVD 9.5
CyberLink PowerDVD 9.5
D3DX10
Dell Control Point
Dell ControlPoint Security Manager
Dell ControlVault Host Components Installer
Dell Embassy Trust... Read more

A:Dell Latitude--Loud Noise From Fan/Excess Heat and Screen IS Frozen

6 more replies
Answer Match 76.44%

Hello,
How i said in subject, my display had annoying ghost of closed apps windows or icons when opet other content.
I tried linux and windows 10 and both os go with weird shadow
That frustrate me so much

Please help.

More replies
Answer Match 76.44%

Someone I work with has a Dell Latitude D620 and the screen blanks while booting in normal mode when in the dock. Laptop boots normally when not docked.

When I try and boot (in normal mode) when docked, I see the black "XP Pro" screen loading (but don't see where I can press F2 to get into setup or F12 for boot menu) and then the screen goes blank.

I thought it may be a screen resolution issue and I backed off the resolution from 1440X900 to 1280X800 but still no luck. Refresh rate is 60hz I do get video when I boot into Safe mode, but not normal mode. Any ideas here?
 

A:Solved: Dell Latitude D620 - screen blanks upon boot in dock

10 more replies
Answer Match 76.02%

Title tells most of it: Dell 8400 w/Vista Business - screen flashes sparkling purple & green and crashes system. Occasionally I get vertical red and blue lines, but rarely

Dell has replaced the motherboard, video card, and hard drive. We've run diagnostics on the monitor and it appears ok.

I've spent in excess of 13 hours on the phone with Dell and Microsoft tech support. They've run (or had me run) every imaginable diagnostic. We've installed different video drivers (I have Radeon X300) to no avail.

It used to be occasional, but now I boot the system and it crashes withing minutes... sometimes as soon as Vista comes up. Sometimes I can boot in safe mode w/networking and it will stablilize but sometimes it crashes in safe mode too.

However, other times the purple/green starts flashing as soon as the boot starts (i.e., prior to Vista loading -- when the Dell logo comes up on the screen.

Has anyone had this problem? Needless to say I'm at my wits end with this.
 

A:Dell 8400 w/Vista - screen flashes purple & green and crashes system

Buddy , any third party software you installed in your Vista prior to this issue and tell me you have an AV in place.
 

2 more replies
Answer Match 75.6%

Hi,
I have a Dell Latitude E6400 on which the LED Screen Display / Video shows steady vertical lines in the right half of the display (partial display on the left side is good, see picture). I have already tested the external VGA port - it displays correctly on an external LCD monitor. The vertical lines are constant and of the same brightness, regardless of the position of the laptop lid. Could this be a problem with the inverter or the LCD display ribbon cable? Or something else? Thanks in advance for any feedback.

P. S. Please note that the golden glow on the top left side of the screen is just a reflection of an ambient light.

A:Dell Latitude E6400 LCD / LED Video Screen Has Partial Display Vertical Lines

It's not the inverter (assuming the display has one);  that simply controls the backlight.  It may or may not be the cable - likely it is not.  It looks like a damaged display panel.

1 more replies
Answer Match 75.6%

So my laptop is an old one however I know it can be fixed. I closed the top when it was updating the computer. Will that cause it to not start up within hours. It comes on shows the Dell symbol then goes to a black screen with a bliking underscore in the top left corner. What should I do? Will I be able to savee any of my work on it?

More replies
Answer Match 74.76%

My Dell Latitude E6420 has black screen of death. Let me explain what happen. My friend bought a battery for his E6440 laptop and his laptop not starting (no display) he asked me to check on my laptop for that battery.
My laptop display gone after inserting his battery and changed to my battery still didn't worked. I connected external monitor display coming there (external monitor is showing primary). but laptop display not coming to make it secondary.
I did steps.
1. drained power 30-1-2. still didn't work
2. changed RAM slots with another still didn't work
3. tried D+ power, did not see anything.
this morning I observed If close display 70 to 80% I can see barely light on the screen window login in the angle. 
Is that means back light gone? What are solutions have now? Do I need to change display? give me suggestion.

More replies
Answer Match 73.92%

I installed Windows 7 Beta on a Dell Latitude D620. Laptop has built in UPEK
biometric fingerprint reader.  Windows 7 did not automatically install a
driver.  I first installed the driver from Dell.com for Vista 32bit. 
Device manager shows driver installed and hardware running, but the
fingerprint reader does not show up in the Biometric Devices screen
from within the Control Panel.  Next, I went to UPEK's website, and
downloaded a driver dated 12/2008.  Same scenario, device manager is
good, but no device showing up in Biometric Devices in Control Panel.  I
removed driver and rebooted machine before and after each attempt. 
Anyone have any ideas?  Or are the existing drivers just simply not
supported currently by Windows 7 Beta fully?  Thanks in advance! - Brian

A:Problem getting UPEK fingerprint reader in Dell Latitude D620 to show in Biometric Devices screen

I checked that with UPEK, and my reader according to the Windows 7 Alert Center, "The model name of your Fingerprint Reader is TCD
41/42/50", is a currently supported reader for this beta??? - BrianUPDATE...I contacted UPEK and they have helped me to get this working.  There are two things I needed to do:1) Download the UPEK Windows 7 Beta software and drivers from here:  http://www.upek.com/win72) Once software is installed, go to device manager, right click on the UPEK reader, go to the power management tab, and uncheck the option for Windows to allow this device to save power or go to sleep.  Reboot.Once I completed this, the UPEK reader worked fine.

9 more replies
Answer Match 73.5%

So when i use my chrome and watch some videos i get on some pages a green screen on the videos then it plays for 10sec, and then i get it again, its really irritating. Occasionally but quite rarely my whole screen goes black and then blue screen appears with some txt. then the pc might reboot itself.

Some system info:
pc: Acer Aspire X1920
prosessor: Pentium(R) Dual-Core CPU E6700 @ 3.20GHz 3.20 GHz
RAM: 4Gt
System: Windows 7 64-bit
Graphics: Nvidia GeForce 405

I have updated graph card and some other things but it doesnt change anything, not sure if this is some file corruption problem or does my graph card going broken. Also i have tried to disable hardware accelerations on the video, but...
Please help!
Thanks!

A:BSOD watching videos at web screen turns green

Hi janhur.

Install the NVIDIA DRIVERS 314.22WHQL only, as a test.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Boot normally now. Go to Drivers - Download NVIDIA Drivers, Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Let us know the results.
___________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa8006b704e0, fffff8800f23de20, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+153e20 )

Followup: MachineOwner
---------

0: kd> !analyze -v
***********... Read more

5 more replies
Answer Match 72.66%

Hello, First post here I am having a BSOD/screen while playing games. it will usually "green screen" or kill the video signal completely, and will sometimes force the PC to reboot or I will have to manually reboot it.

Problem randomly started, used blue screen viewer and it says caused by "watchdog.sys" caused by address "watchdog.sys+3e1d"

Crash address
"ntoskrnl.exe+142760"

I just joined the site a few minutes ago as I could not figure this problem out.

Downloaded the "dm log collector" and followed the BSOD posting instructions, looks like it collects a bunch of files for diag'ing.

debug zip is attached.

(I have been trying chase this down for 2 weeks now.)

PC Specs
I7-3770K
12 GB RAM
DZ77GAL-70K MOBO
Windows 10 Home
AMD ASUS 380X OC'ed edition. (GPU)

Thanks in advance.

A:BSOD/Green Screen While Playing Games (Debug Zip Included)

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

I see 2 0x119(VIDEO_SCHEDULER_INTERNAL_ERROR) in the event logs and 1 0xEA.
The 0x119 is focused on the graphics card where the 0xEA is focused on faulty hardware and drivers.

Please remove any overclocking if present and test your system.

Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to ONLY install the display drivers using custom/advanced options.


Code:
ffffd001`0bbe37e8 fffff801`ef4f8310Unable to load image atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
atikmdag+0x18310

2: kd> lmvm atikmdag
start end module name
fffff801`ef4e0000 fffff801`f0c3b000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: atikmdag.sys
Image name: atikmdag.sys
Timestamp: Wed Dec 23 16:58:26 2015 (567AC4A2)
CheckSum: 016DE42D
ImageSize: 0175B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

0 more replies
Answer Match 71.82%

current sys specs

Windows 7 Ultimate 64-bit SP1
CPU AMD FX-4100 [3.8 ghz oced]
RAM 8.00GB 2x 4gb corsair vengeance Dual-Channel DDR3 @ 803MHz (9-9-9-24) [1600mhz oced]
Motherboard GA-78LMT-USB3 rev 4.1
Graphics 2047MB NVIDIA GeForce GTX 750 Ti

so i recently add

2 new hardware

1 is 4 GB same ram by Corsair

and another 1 is

Zotac nvidia gtx 750 TI [new bought]

so firstly i played crysis 2 for almost 6 hrs no BSOD even max temp was 45 in card

after completed download of far cry 3 i started playing first run it give me 2 hrs run time and

got bsod color screen bsod no error code and even some time mini dump also not created

after next 10 attempt max run time of game is 1 hrs

in game setting is all ultra MSAA 4x and other all thing also maxed out

it give me 40 ~ 45 [99% to 100% gpu load] fps on stock clock and when i oc i got 50+ fps but it crash in 15 min also furmark showing me instability in system due my low brand and 1.5 year old 450 W VIP(local brand) PSU

so i play on stock clock

also did recent nvidia driver update .60 no help

i think problem is in game maybe not tried memtest86+ yet stressed cpu for 4 hrs no error

gpu not stress tested for long time 10 on stock clock stable as it new

also tested my psu 20 days ago with multimeter all voltages was pretty stable

A:playing far cry 3 color screen BSOD [pink,green,red] error 0x00000124

again restart this time

i claim up to radio tower and bam red screen for 15 sec and restart

after windows load it give me 2 min back screen only arrow showing

so that is maybe gpu side fault

it is hardly 20 days old

currently downloading gpu driver for clean install driver

4 more replies
Answer Match 71.82%

I'm having a BIG problem with the computer screen. Pixels on my screen keep turning green & pink. It also keeps changing the screen resolution by itself. I tried installing the latest graphics driver from Compaq, unplugging my phone, neither worked. I've provided an image below:

Please, please, can you help me!
 

A:Random pixels on screen turning red & green, with screen res changing by itself

6 more replies
Answer Match 71.4%

Hey guys, thanks in advance for any help or advice (I'm currently compiling my zip).

I don't know what the cause of the problem is, but I have some ideas. I will start by explaining the problem, and how it arose.

Playing Minecraft, I mined some dirt and horizontal blue lines / squigglies appeared on my screen. Moments computer went to BSOD, but then rebooted normally. Tried again, and the same problem occurred. I've played Minecraft before; but it could have something to do with the new update.

I recently installed windows recommended updates, the problem had not occurred before this. I also recently installed Daemon Tools Lite. I don't think it's a software conflict...

I got the blue lines, but my computer did not shut its self off. After a few moments I manually powered down. After waiting I attempted to reboot: The screen turned on, but displayed only black. I took out my battery, rams, hd, and unplugged for a while. After replacing, it booted up and the screen worked.

Prompted to initialize windows repair prior to bootup, I accepted. Not long into the diagnostic vertical green/brown lines appear. Computer did not crash... Diagnosis found no problem. Started it up, ran some freeware diagnostic tool, and it crashed halfway through. Boot up = black screen. Took out hd, let it cool down, replaced, pc boots up.

--

I read that it could be a power supply problem causing this. Is it possible? To me it doesn't make much sense, but the DC adapter did fail to w... Read more

A:Blue Horizontal / Green Vertical lines = BSOD / Blank Screen Bootup.

A registry scan indicates many errors. Fixing these help or cause more problems? I've never done it before.
Running sfc scans now [picked up nothing, ran 2x], then will update graphics card. Will post results.

Sorry if this thread was jumping the gun on an easy solution... but when it didn't want to start up the first few times, I became quite concerned.

After uninstalling my my nvidia drivers, before re-installing, the blue lines popped up again after the required reboot. This time they didn't cause the computer to crash, so I shut it down. I'm going to wait a while, as this seemed to be a temporary fix for the problem last time, and then install the new driver.

After waiting a boot resulted in the all-too familiar Black Screen (no splash, dos writing, or mouse pointer. But light is emitting from screen). I'm going to shut it down, and leave it off for a few hours (give it proper time to cool off).

12 more replies
Answer Match 70.98%

Hello, I know this isnt technically a BSOD, but its still a crash, my laptop crashes each time I play games. The crash happens in 3 different forms, sometimes the screen goes weird and then two bands appear, one purple one on top and a whiteish one on bottom, the whiteish band slowly turns green until it completly turns green. The other variants are black screens, but in one form it beeps 3 times after the crash, in the other it doesnt. I tested to see if the laptop would crash with war thunder, I got through the entire menu and to flight test, my plane was in the landing strip, for about 20 seconds, as soon as I pressed the "w" key, the crash happened, it was the purple with green one. I would also like to say that yesterday there were no crashes whatsoever, they just started today. I have a cooler under my laptop at all times. Oh and also, I took the battery out and pressed the power button, then I played an entire match of insurgency without a crash, but then I connected my head set and cooler to the USB ports and it crashed shortly after, dont know if coincidence or something to do with the power. Please help, any help would be appreciated!

A:Crash, Black Screen sometimes purple and green screen

Update to the problem, now each time I want to turn it on it beeps 8 times, its starts off with high pitched beeps and then beeps 8 times with low pitched beeps

1 more replies
Answer Match 69.72%

This is a repost of an old expired posting but the issue still exists!....wondering if anyone can help provide suggestions...I thought it was OS related or docking station related but I have ruled that out. I tried using the correct docking station for the M6500 and also windows 7 or windows xp and same results!...the dual monitor configuration will NEVER save and we always have to keep redoing the settings every single morning..............if anyone can provide suggestions or things to try that would be most helpful!!
Keep losing dual monitor settings, Dell M6500 Precision Laptop
I have a Dell M6500 precision laptop that has 1 DELL monitor hooked up to it so that it is in a dual monitor configuration with the laptop.

Everytime I undock or reboot or power down the laptop or take the laptop out of the docking station, the laptop would always forget it's dual monitor settings and clone my other monitor rather than keep the "extend the desktop" settings. After I check I can confirm that the laptop always unchecks the Extend my monitor unto this laptop checkbox automatically.

The laptop also seems to reverse and move my icons around the screen and I would have to manually move them all back again. This is frustrating to have to keep doing this and moving my icons back to their original location as well as redo the dual monitor settings again every morning.

I read that a lot of people think it can be a drive problem but I did download the latest drivers from ... Read more

A:DELL M6500 Laptop keeps losing dual screen configuration

i have a dell precision m6300 and it came with no docking station. can i make a real stupid suggestion? mine works just fine without one maybe u can try using the computer without the docking station and see what happens.i dont think its a driver problem u might have to go into the display settings in the control panel and see if u can change the monitor settings so that they wont have to keep being changed. hope this helps u.if someone can think of more suggestions im sure they will be by to offer assistance.
 

3 more replies
Answer Match 68.46%

I'm looking at my neighbours PC as they've switched it on today, only to find out that it will no boot. I have switched it off and turned it back on, this led to me getting an error due to failing to past TMR2 Checkpoint as well as a prompt to contact Dell Technical Support.
Someone suggested that I should try removing or replacing the CMOS battery, which I have, this seems to have got me past the error screen, however, the system now hangs on the Dell Screen with vertical bars running down the monitor.
Any suggestions? 
So far,  I have;
1. Replaced the CMOS battery
2. Checked that the components are all seated correctly.
Thanks

More replies
Answer Match 67.62%

 HI!
 I need to know if the Intel Dual Band Wireless-AC 7260 device is compatible with (supported by) DELL Latitude E6540.

 This is the device link: http://ark.intel.com/products/75439/Intel-Dual-Band-Wireless-AC-7260
 This is the device picture:
Anybody know? It is compatible?

Thanks,

Pedro

More replies
Answer Match 67.62%

Hi,
DELL Latitude E6540 supports Intel® Dual Band Wireless-AC 7260?
Intel® Dual Band Wireless-AC 7260 Specifications: http://ark.intel.com/products/75439/Intel-Dual-Band-Wireless-AC-7260

Thanks,
Pedro

More replies
Answer Match 67.62%

First off let me say I am stumped.
I upgraded my rig a few months back, I put in a new mobo, an ssd, and attached a free 24 in apple cinema display to compliment my already large 27 inch samsung screen. I have not had any problems since day one of the dual screen set up.

Last night however, a friend of mine asked me to put together a rig he made with some new parts. So from the bare bones, I put his rig together. To install windows and such, I loaned him a 22 in hp monitor that I had laying around. This is where it got interesting, the rig would start and churn out the appropriate sounds but I would get no image at all. So after 20 minutes I decided to try my apple screen. I powered down and unplugged my psu and relocated the apple screen to the other table for testing. It did not work.
Now like most people I have a job early in the morning so I let it sit overnight, Today after reconnecting my apple screen to my rig all is well. Or so I have been duped into believing. My rig now, randomly without warning attempts a restart and hangs on the BIOS screen. After hanging for 7-8 minutes it will try to start the post. The command lines blinking hash starts where normal and then starts blinking and jumping up and down a few inches on the screen before settling about 1 1/2 down from where it would normally be. There it stays, not moving and not doing squat of whats supposed to happen.

I am stumped, any ideas would be appreciated.

P.S. this message is being written in Sa... Read more

A:Dual screen BSOD

Hi David -

Does the system boot into normal Windows if the Apple monitor is not attached? -- only the Samsung monitor?

Boot into Safemode, but choose "Last known good config" instead.

If no-go, run Windows System Restore from Safemode -
START | type rstrui

Regards. . .

jcgriff2

`

1 more replies
Answer Match 67.2%

replaced defectivve green screen with 2 others--no luck --both generate narrow verticle pink bars where white background is supposed to be.  now when it starts up everything goes normal until like opening the start box- background all vertical pink bars----------the model number of the original screen is -------  B173RW0 V.3-------some screen sellers don't have the ability to cross my part number---MY BIGGEST QUESTION IS CAN A SCREEN CAUSE THE PINK BARS I HAVE DESCRIBED OR AMI BARKING UP THE WRONG  TREE???????

More replies
Answer Match 65.94%

Hello guys, I was wondering if you could give me some assistance on the matter..
For full detail, please refer to this thread:

Dual Monitor Causing Crashes.

As you can see I'm experiencing a rather funky issue only when I have dual monitors, and after gaming only.

I have attached the screenshot of the analysis from bluescreen viewer.
Thank you very much for your help, and please ask as many questions as needed.

A:BSOD caused only with dual screen arrangement.

This is a Graphics/Display related BSOD, caused by any display related elements.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa800772c4e0, fffff88006e1d8b4, 0, d}

*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+98b4 )

Followup: MachineOwner
---------
Follow this guide: STOP 0x116: VIDEO_TDR_ERROR troubleshooting

5 more replies
Answer Match 65.52%

okay so recently my power supply went out after 6years~ so i decided to do a little upgrading and a fresh copy of windows 7 ultimate. Upgraded my processor to 4770k and motherboard to GA-Z87X-UD3H with a seasonic 650w power supply gold rated efficiency. I did however keep my old ram which is 2x2 gbs of ddr 1033~ forgot what brand but they have heatsinks on them. And my graphics card which i replaced about 2 years ago~ amd 6000 series forgot which card but i got a good deal on it.

so a week in im doing some internet browsing maybe hearthstone reddit with hearthstone in the background and skype, i go from one screen to the next to check skype messages boom blue screen. Then i got it again a few days later after switching my display to my tv and turning off one of the monitors and again another time.

I thought it was my ram at first but i did a windows memory test or whatever its called and it came out without 0 errors. so here i am all help is appreciated thankyou.

TL;DR new psu cpu and mobo fresh copy of windows but old gfx car and ram that passed windows memtest. crashes during low stress internet browsing and changing screens said something about memory dump.

A:BSOD basic internet browsing dual screen

Welcome to SF giant .

First step is updating to Service Pack 1:
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64

BugCheck 3B, {c0000005, fffff9600023c9f9, fffff8800603f100, 0}

Probably caused by : win32k.sys ( win32k!MulAssociateSharedSurface+21 )

PROCESS_NAME: dwm.exe

lmvm win32k
Browse full module list
start end module name
fffff960`00010000 fffff960`0031f000 win32k (pdb symbols) c:\my\sym\win32k.pdb\A9F6403F14074E9D8A07D0AA6F0C1CFF2\win32k.pdb
Loaded symbol image file: win32k.sys
Mapped memory image file: c:\my\sym\win32k.sys\4A5BC5E030f000\win32k.sys
Image path: win32k.sys
Image name: win32k.sys
Browse all global symbols functions data
Timestamp: Tue Jul 14 02:40:16 2009
Run the system in that configuration for a couple of days or until new BSOD, which ever comes first
post back with the results.

3 more replies
Answer Match 65.52%

I upgraded my 8700M GT 512 SLI card to 9800M GTX 2GB SLI in my M1730 system.. and from that moment I'm getting strange bsods after I installed recent drivers in windows 7 64bit (I have tried official 195.62 for notebooks and 196.34 desktop ones) enabled SLI and most importantly switched to dual screen as I use notebook lcd + external monitor.

Every time i start up windows with my external monitor pluged in the DVI on my notebook, windows will get bsod right after it starts up or a minute after it when I try to start ie8 for example.

I figured out that when I disconnect external monitor or switch to notebook lcd display only after booting to VGA mode the BSOD will not happen and everything is ok.. most strangely when I connect my external monitor after the windows starting is finished then the BSOD will not happen.

So to summarize I have to disconnect my external monitor when I reboot my computer and connect it after the system is up and running otherwise I get bsod.

I havent played with it for a long I only get the new card yesterday, but I get the same problem in vista 32bit windows, when I tried to install the new card under this os.

Does anybody experienced someting like this or knows what it might cause it?
I would appreciate any help or pointing to the solution....

thanks

A:Win7 with dual screen BSOD w/ 9800M GTX card

It helps everyone if you can post the bluescreen info, minidumps, or any error messages that you get when this is happening.
Does this behavior occur using the old video card? If not then I think it's very likely you have a defective video card.
Otherwise it might be a power issue. Are you trying to do this on battery power?
Also, are you completely uninstalling all the old video software and drivers before you install the new ones?

8 more replies
Answer Match 64.26%

Hi,

I have a windows 7 touch screen laptop which I am using along with an extended desktop on a secondary monitor. Is there any way I can lock the mouse/pointer onto the secondary monitor but still use the touch screen facility on the laptop itself?

thanks in advance for any help provided.

nova-lighting.
 

More replies
Answer Match 64.26%

First of all; Thanks to anyone taking the time to read this and help me with my minor issue!

I have been running dual screen setup for awhile now and early on I realized that I had to set the monitor on the left to the 'Main Display' so that tiled wide resolution images would span across both monitors.

after a time i realized that this inconvenienced me in several ways.

How might one set the main display to the right hand monitor while having the image for the wallpaper start on the far left corner?

A:Dual Screen - Main Screen on Right, Wallpaper won't display properly

Hi, welcome to the forum. i do not believe you can do that on win 7 i think thats a feature in windows 8 i believe i read it somewhere. someone will correct me if i am wrong

9 more replies
Answer Match 64.26%

Today I set up a 2nd monitor for my PC, but discovered my graphics tablet spans across both the screens, essentially halving the size of the canvas space for drawing. Is there any way I can restrict the tablet to using only 1 of my screens?

I use a Vistablet. There are no settings in the tablet settings that say anything about screen settings.

A:Force Graphics Tablet to Use 1 Screen in Dual Screen Setup

Solved by downloading latest drivers

1 more replies
Answer Match 64.26%

Hello,
I have a Dell Latitude e6520 and installed have upgraded to Win10 recently. After that I did a clean install and everything was running fine up until three days ago when I got the PAGE_FAULT_IN_NONPAGED_AREA BSOD.
I have analyzed the minidump files using BlueScreenView and found the same cause of bsod in every dump file:
Bug check string: PAGE_FAULT_IN_NONPAGED_AREA
Bug check code: 0x00000050
Parameter 1: fffff6fb`400037a8
Parameter 2: 00000000`00000000
Parameter 3: 00000000`00000000
Parameter 4: 00000000`00000006
Caused by driver: ntoskrnl.exe
Caused by address: ntoskrnl.exe+142780
I ran sfc /scannow and found no problem there, I ran the system software utility tools and no disk errors turned up, as well as no memory errors using memtest. 
If anyone could offer any advice toward a solution, I would very much appreciate it.
Thank you in advance.

More replies
Answer Match 63.84%

I've been having BSODs multiple times a day for a few months now. I removed some windows updates that caused the problem, and that worked for awhile, but they're back with a vengeance. I'm surprised I got this full message here before I got another one... I've attached all the dumps since it started happening, but they're tagged with the dates so you can look at only the most recent if you want. I'm really grateful that a forum like this exists.. I'm at my wit's end here and any help is greatly appreciated.

A:BSOD errors randomly appear, possible dual-screen/graphics driver prob

I seriously got 2 more since I posted this, both doing with a driver called "dxgmms1.sys". This is crappy, because I have to keep a connection to my employer's VPN and be able to work consistently.. Anybody think of anything yet?

2 more replies
Answer Match 63.84%

Got BSOD on Dell Latitude running Vista.
Stop:0x00000024 .........
Diagnostis Error Code for IDE Disk: 0F00:0244 (5 blocks listed then error code 0F00:1A44. Run chkdsk and scandisk say everything is fine. I have diagnostic and driver CDs but not Vista operating system. CD. I assume the HD needs to be replaced, but is there anyway I can get an Vista OS and download to another computer and then install on Latitude?

Or are there any other ideas?

A:BSOD on Vista on Dell Latitude

Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

7 more replies
Answer Match 63.84%

Starting tonight I was noticing that my laptop was running really slow and the hdd indicator is staying on constantly, then it freezes and gets the blue screen. Under tech info on the screen, it says "*** STOP: 0x0000007E".

I have ran the built in system diagnostics and the memory test ( took 45 minutes). Both tests come back clear. The laptop also blue screens in safe mode.

I am not sure what to do at this point. Any ideas?

Sent from my ADR6300 using Tapatalk
 

A:BSOD Dell Latitude D830

hi bgandy,
this is taken form the microsoft website:
This issue might occur if a system thread generates an exception that the error handler does not catch. This exception can be caused by any of the following:
?If this issue occurs after the first restart during Windows Setup or after Setup is complete, the computer might not have sufficient hard disk space to run Windows XP.
?The computer BIOS might be incompatible with Windows XP, or it might have to be updated.
?The video adapter drivers might be incompatible with Windows XP.
?A device driver or a system service might be damaged.
?If the issue is associated with the Win32k.sys file, it might be caused by a third-party remote control program.


http://support.microsoft.com/kb/330182

i have also put the link on there as it also gives a couple solutions on how to fix it.

hope this helps
James
 

4 more replies
Answer Match 63.84%

Having all kinda of hell with a Dept Mangers machine Windows 7 machine. Had sound and Bluetooth issue that i finally reoslved. Now I'm getting a BSOD. It flashed something on the screen about IRQ INTERUPT.

I did pull 2 mini dumps. Can someone please decode these and help save my bacon lol

THANKS!!!!

A:BSOD Dell Latitude 6510

Crashes are being caused by your Intel network driver. Download and install the latest driver

http://downloadcenter.intel.com/Deta...adType=Drivers

BSOD BUGCHECK SUMMARY

Code:

Built by: 7601.17592.x86fre.win7sp1_gdr.110408-1631
Debug session time: Fri Jun 24 15:49:54.034 2011 (UTC - 4:00)
System Uptime: 0 days 0:23:36.233
*** WARNING: Unable to verify timestamp for e1k6232.sys
*** ERROR: Module load completed but symbols could not be loaded for e1k6232.sys
Probably caused by : e1k6232.sys ( e1k6232+160e5 )
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xD1_e1k6232+160e5
BiosReleaseDate = 11/20/2010
SystemManufacturer = Dell Inc.
SystemProductName = Latitude E6510
CPUID: "Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz"
MaxSpeed: 2670
CurrentSpeed: 2660
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.x86fre.win7sp1_gdr.110408-1631
Debug session time: Fri Jun 24 15:24:29.148 2011 (UTC - 4:00)
System Uptime: 0 days 0:29:34.656
*** WARNING: Unable to verify timestamp for e1k6232.sys
*** ERROR: Module load completed but symbols could not be loaded for e1k6232.sys
Probably caused by : e1k6232.sys ( e1k6232+16171 )
BUGCHECK_STR: 0xD1
PROCESS_NAME: nvxdsync.exe
FAILURE_BUCKET_ID: 0xD1_e1k6232+16171
BiosReleaseDate = 11/20/2010
SystemManufacturer = Dell Inc.
SystemProductName = Latitude E6510
CPUID: "Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz"
MaxSpeed:... Read more

1 more replies
Answer Match 63.84%

I'm running xp/sp3 on a dell latitude d800 laptop. As far as I can tell, my problem started when I began using a philips webcam (this one: http://www.p4c.philips.com/cgi-bin/d...&scy=hk&slg=en) with skype. I'd used the webcam before on my previous acer laptop (running vista) with no issues. i can use it with MSN or using the philips software and nothing happens. But whenever i use it with skype, my comp will periodically turn to the bsod, giving me the tech info: STOP 0x00000019 (0x00000020, 0xE19280c8, 0xE19280F0, 0x0c050201). sometimes i can only have the wc on for 5 minutes before this happens, sometimes i can go hours before it does. When i restart (it usually takes a few tries for the bsod to go away), i get that little icon in my taskbar that says "a problem occured in the installation of your new hardware" or something like that. i did a bit of googling and someone found that they were getting the same error when they installed the software for an hp precision scanner, which i have also recently done, though i don't remember if the problem started before or after that. i uninstalled the software, and the problem still persists. also, as of the past few days it sometimes happens without the wc running, though if the wc is on it absolutely always happens (its just a matter of how frequently). any ideas?

More replies
Answer Match 63.84%

I have 2 monitors set up,

Primary: Samsung Syncmaster 19 Inch widesreen 1400 * 900
Secondary: LG E2541 25 Inch Widescreen 1980 * 1080
OS: Windows 7 64bit
VideoCard: Nvidia Geforce 560 Ti

I use my primary mostly for browsing, msn, music players, Ventrilo etc etc,
I want to use my secondary Monitor for gaming Watching Videos.

However, when i want to use something Full screen on my secondary monitor it goes full screen on the primary monitor.
I cant also run it in windowed mode and stretch it out to full screen, it does not allow me to do that, it goes back to the size of my primary Monitor.

Is there an Way to achieve this?

Ps.
I want this since i play mostly with fullscreen borderless or in windowed mode so i can still browse the internet or adjust music/ventrillo settings.
I dont want to have an Taskbar below the game, so thats why i need it on the Second Monitor.

greetings Eir

A:Dual screen, unable to full screen on second monitor

Hi welcome to Seven Forums

I am not sure what you are trying to do, the primary monitor (usually the largest) is for gaming and the secondary is for extras.

You say you want to play games full screen on your secondary monitor? Why not reverse the screens so the larger monitor is primary and the secondary is the smaller. Then your games and movies will still be running fine on the large monitor and your web browser, explorer, email ect. is on the smaller monitor.

"I dont want to have an Taskbar below the game, so thats why i need it on the Second Monitor." If the game is full screen the taskbar shouldn't be showing or if you still want to have the screen in a window, use the 'Auto-hide the taskbar' option so it disappears when not in use.

N.B - I have 2 different screens with the same resolutions as yours, using the 560ti and it works fine.

8 more replies
Answer Match 63.84%

hey there,

i got a problem with a dual screen setup. when i boot my computer and turn on monitors my 2nd monitor doesnt stay on. he usualy turns black. then i gotta turn em off and on again like two times before he stays on. when he stays on i can hear a very silent peep sound commin from somewhere. since i got somewhat bad hearing i cant tell where it is commin from. last 2 days the monitor also started flickering for a few seconds.

Since i couldnt find anything on the web and dont know what is making the monitor do that, i figured i would ask you guys here

So here is what i did so far. I checked graphic drivers and the connections. nothin changed.

Thx in advance for the help...

Best regards

smallfoe

[edit] i hope thats the right forum section to post at, if not feel free to move the topic as you please <3

More replies
Answer Match 63.84%

Alright guys, this one is really crazy.

I'll start simple, BRAND NEW INSTALL, nothing installed other than Windows Update over and over and over until no more show.
More recent driver from Dells site. The driver windows update gives makes everything crash. (re-installed windows after I tried that driver) no left overs found hehe..
Ok, computer specs.
Dual Core (E2140) @ 1.60GHz 1.60GHz
1.96 RAM (video took some )
Microsoft Windows XP Pro SP3
Windows Media Player 11 (no matter what player it does this junk)
Nothing else is installed yet, I keep formating trying to stop this issue. Well MSN messenger is installed, And I goto Myspace.com

left (On board video) ATI Radeon Xpress 1100
right (PCI Card) Radeon 9200 PRO Family

Ok.. the issue. At first its hard to notice, since nothing is installed yet, so once windows boots, the PCI card becomes the main card, has the login screen, start menu and all... when the issue happens , task manager, on Peformance, it doesnt show much to say its bogged down, RARELY when it skips the left side of the processors is just a little higher up, but that means nothing right.

Well.. heres the weird part of it. So if I turn on visualization it is none stop skipping popping you name it, BUT if I move it to the onboard screen, it stops.. but get this.. If I goto now playing, and have the playlist open. and I make its 50 50, visualization - playlist.. and i move windows media player to both screens, making sure visualization is not on the PC... Read more

A:Music Skips and Pops (only on one screen of dual screen)

This computer is a Dell Optiplex 320
Onboard sound card (SoundMAX Intergrated Digital HD Audio)

I was reading through google and finaly found something that kinda helped.. Really weird too..

This guy had similar issue with just windows media player, but he only had one screen so he couldnt bare it.

But it turns out it only (solidly) pops and skips with the (Alchemy visualization) the others is not so bad, only when theres huge changes in whats on the screen.

BUT stil when PDFs open. or viewing flash or myspace on the PCI screen it skips.

1 more replies
Answer Match 63%

Have a Dell Latitude E6410 - If the laptop sits idle for a while (about 10 or so minutes) I get the BSOD. Not sure if it is related to the hibernation or not. Have a few new AC adapters I bought for it, but can't confirm that is the problem. Have read about hibernation causing an issue, but wanted to get the thoughts of the forum based on what the log collector shows. Thank you for all help !! JB

I am attaching a picture of the BSOD as well.

A:Dell Latitude E6410- If is idle for a while I get BSOD - why ?

I have an E6410 running Windows 7 Pro x64 with no issues at all.

Have you checked your drivers to ensure current versions?

9 more replies
Answer Match 63%

Frequent and random BSODs.

This PC worked fine with Windows XP, never a problem. After installed Windows 8 Pro (clean install, no upgrade) I started with BSODs (few days after install). Done all memory tests, no problem with memory (2 GB). Also tried to manually set page file (min and max size: 8 GB), nothing changed.

A:Daily BSOD on my DELL Latitude D830

Your BIOS dates from 2008. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

Only 450 mB of RAM free - you need more memory in order to run Windows (and lack of memory can cause BSOD's). While waiting to add more RAM, please trim your startup items using the Startup tab of Task Manager. Also, only run one program at a time until you get more RAM.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

bthav.sys Thu Jul 10 11:43:53 2008 (48762E39)
Bluetooth A2DP Driver (Advanced Audio Distribution Profile). Either from Microsoft or CSR - I am uncertain as to which it is. See this article: Installing Bluetooth Headset on Windows 7 / Windows Vista / Windows Server 2008 - Komeil Bahmanpour
http://www.carrona.org/drivers/driver.php?id=bthav.sys

VSTCNXT3.SYS Wed Oct 15 20:29:13 2008 (48F68AD9)
Conexant SoftK56 Modem Driver
http://www.carrona.org/drivers/driver.php?id=VSTCNXT3.SYS

VSTAZL3.SYS Wed Oct 15 20:30:03 2008 (48F68B0B)
Con... Read more

8 more replies
Answer Match 63%

After installing fresh windows 7 I keep getting BSOD. Previously I had XP and had no problems. All drivers should be up do date.

I will attach my log to the post.

A:Dell Latitude E5400 0x124 BSOD

Hi RaidoR,

The system crash seems to be happening due to a 'hardware issue':

Code:
Loading Dump File [C:\Errors\RaidoR\SF_11-03-2013\031113-38547-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a1f000 PsLoadedModuleList = 0xfffff800`02c5ce50
Debug session time: Mon Mar 11 11:47:25.547 2013 (UTC + 5:30)
System Uptime: 0 days 0:00:30.388
Loading Kernel Symbols
.....................................................
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8004b17038, 0, 0}

Probably caused by : hardware

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* ... Read more

9 more replies
Answer Match 63%

Attached is the ZIP file requested, but I was unable to create a "perfmon /report" file. I receive an error of "Error: An error occured while attempting to generate the report. The system cannot find the path specified." when attempting to generate the report. I tried to manually create this report based on some information I found instructing me to create a report using a User Defined Data Set inside of the Performance Monitor tool, but I'm unable to create a User Defined Data Set (for some unknown reason......I do not have an active "next" or "finish" button within the 'Create new data collector set' wizard). If there is an alternate way to create this report, please advise and I'll do so.

More background on my error:
I have a Dell Latitude E6400 with Windows 7 64 bit. I received the BSOD this morning with a "System_Service_Exception" error, and an indication that the error is tied to the NWIFI.SYS file.

The BSOD happens when my machine is booting up, and it bombs just as I typically would see the "CTRL-ALT-DEL to login" type of message. My machine seems to work fine in Safe Mode With Networking, and switching off the wireless card using the physical/manual switch on the side of the laptop prior to bootingdoes not affect the issue at all.

I have updated my Dell Wireless 1397 1510 Driver to the latest version available from the Dell website to no avail.

I made no changes to my machine in terms of har... Read more

A:Win 7 64 bit BSOD - nwifi.sys - Dell Latitude E6400

Disregard my post. I have resolved the issue.

It was tied to the version of Symmantec Endpoint Protection at my company. I upgraded (uninstalled old and did a clean install of the new version) my version of SEP and fixed the problem.

More context around my activities in troubleshooting the issue on my Dell Latitude E6400 Windows 7 64 bit machine:

I first thought it was a hardware or driver issue tied to the wireless driver, and tried the following two things:
1) Updated my wireless driver to the latest available from Dell (I was at least one release behind)
2) Swapped my hard drive into a different E6400.
Both failed, and the issue remained.

I tried to use the ?repair? function in the Windows ?F8? boot screen of available diagnostic options. Fail.

I tried to restore my machine to an earlier restore point several different times with the two available restore points. Fail.

Around this point I went home for the day (after a final attempt to do a system restore). When I got home (and assumed my machine was still useless) I fired up my machine in ?normal? mode (I had been using ?Safe Mode With Networking? during my troubleshooting), and everything worked. Puzzling. I assumed my last ?system restore? attempt had been successful in resolving the issue. I used my laptop last night without issue.

I got into work this morning, docked my machine, logged on, launched a couple of apps, then?.BSOD! DAMMIT!

I then figured that the issue was tied to something tha... Read more

1 more replies
Answer Match 63%

Sporadic BSOD on Dell Latitude E6510 notebook.
Memory & hard disk show no errors.
Please advice. See file attached

More replies
Answer Match 63%

Windows 7 x64 SP1 laptop. BSOD an various times. Please advice. Enclosed is report.
Note: Could not complete "perfmon /report" to generate Performance Monitor Report...

According to BlueScreenView by NirSoft:
BUG CHECK STRING:
DRIVER_VERIFIER_DETECTED_VIOLATION - ntoskrnl.exe
KMODE_EXEPTION_NOT_HANDLED - USBPORT.sys & tunnel.sys
DRIVER_IRQL_NOT_LESS_OR_EQUAL - ntoskrnl.exe & usbehci.sys

Please advice.

A:BSOD Dell Laptop - Latitude E6510

Can anyone please help with this?

1 more replies
Answer Match 62.58%

I have a dual screen setup, and I want to force a game to open on the secondary screen. Is this possible. The game is fullscreen only, so there is no window to drag to the other screen. Is there a command switch that can control which screen it opens on??

P4 3.6Ghz Windows XP SP2
2 GB Ram
ATI Radeon X800XL 256MB PCI-E
2- 20" Dell Digital Flat Panels
 

A:Dual Screen Force Game to 2nd Screen

You can always set the currently secondary screen as primary & move your icons & taskbar around.
 

7 more replies
Answer Match 62.58%

Okay we were hooking our laptop up to the TV to watch hulu on it. Somehow I think we are stuck on the second screen because we can move the cursor and drag icons and stuff over to it. I don't know how to get back to the first screen. I can try to explain more if nobody knows what I'm talking about.
 

A:dual screen problems, blank screen

ItsRob20
Hello and welcome back to TSG.
Before we proceed on this thread, may I point out to you that you previously started this thread on 5 October
http://forums.techguy.org/virus-oth...google-redirect-congratualations-you-won.html
After assistance from one of our Malware experts DFW he posted on 15 October in his post 24
This should stop all the redirects, please check and let me know.Click to expand...

YOU have never responded.

On the 13 October you started this thread
http://forums.techguy.org/windows-xp/1021958-everything-got-smaller.html
You responded just once, on that date. With this reply
What will happen when I do this and how do I get back that driver?Click to expand...

However further advice was offered and you never replied.

It is really not acceptable to start threads and not see them through to a conclusion, or at least to post that you no longer require help, if that is the situation.

May I ask for your co-operation in this matter.

When you do reply, I feel reasonably certain we will be able to assist you.

Thank you for your understanding in this matter.
 

1 more replies
Answer Match 62.58%

Is there such a thing as software to move a window from one monitor to another. I had this feature on my old computer which had ATI software, I think. I could right click on the name of the folder in my toolbar and a menu would pop up asking if I wanted to move it to monitor 1, as well as, move it to monitor 2. This came in very handy at times, but my new GIGABYTE, GeForce 6600LE video card didn't come with this option. I'm wondering if it has to come from the company that created the card, or could be done with other software.

Also, is there a shortcut key in windows XP to move a folder? What I am dealing with is this morning I tried to open My Documents and it had apparently been on the #2 monitor when I shut windows down last night. For some reason the monitor would not come on this morning. Never happened before. I couldn't get My Documents to move to my #1 monitor. I went to the web site for the video card to see if they had software available to move items from one screen to the other, and found they had new BIOS for the card. I downloaded them and it rebooted my computer. At that time the monitor came on, but I'm not sure what the problem was in the first place. I would like to be prepared if something like this should happen again.

Thanks
Peg
 

A:dual monitor moving from screen to screen

6 more replies
Answer Match 62.58%

So I have a Lenovo H415 Desktop,
currently with a Nvidia Gt 620 as primary display driver.
Cpu: AMD A4-3420 Apu with Radeon HD graphics
4gb ram and windows 8.1.

So my issue is i have a dual screen setup, however when i look in screen resolution screen It is shown that i have 3 screens connected and the phantom screen is "connected" via Windows Basic Display Driver. I have tried disabling, Disconnecting the screen from Multiple Displays drop down in Screen resolution window. Another issue with this is the boot screen is all shown on this phantom screen on boot up and then at the login screen it reverts to my primary display.

Attached is an image of my issue.

Thanks for any help.

A:Dual Screen setup a with a phantom third screen

It might be due to the fact you have 2 GPU's that are active...just a guess. Is there somewhere in the BIOS or CCC to turn off the GPU of that AMD APU.

5 more replies
Answer Match 62.58%

Hi. I want to have slide show show on 2 screens, also be nice to have screen-saver show up on 2 screens, pics on each or alternating
I have a 64 bit Win 7 Porfessional,, 8 core AMD processor, two Asus cards in an SLI rig, 8 gigs of ram. This is a home-built rig I use for flight simulator, and streaming YouTube
My Win XP machine I use as a map computer, does not have a problem using both screens for screen - saver pics slide show. And this is an ancient machine.
Any help or point me in the right direction would be much appreciated. Thanks.

2 LCD screens, one an ancient Apple 15" the other is a 42" Vizeo

A:Screen Saver or Slideshow Help W/ Dual Screen Rig

This should do the trick

FREE Wallpaper Slideshow LT - Automatically change your desktop wallpaper

A Guy

3 more replies
Answer Match 62.58%

Hey everyone, I seem to have a recurring problem that I just can't puzzle out on my
own and need some help here.

A few months ago I had to replace my power supply unit, and at the same time decided to
upgrade my RAM and OS (moving from Windows Vista to Win 7).
Before I was running on 1 gig of DDR2 PC2-5300 667 MHz. I updated it to PNY 4 gigs
(also DDR2 PC2-5300). Computer kept restarting so I brought it down to 2 gigs - things
worked ok for a little while and then I started to have similar problems again. My PC
continually restarts itself randomly, Displays the Blue Screen after an hour or so of
operation and constantly freezes on the starting Windows 7 logo screen.
I have absolutely no clue where these issues could be coming from. All of the RAM seems
to be accurate spec wise and I don't believe the Power Supply to be at fault. Also, this is more recently, whenever I try to sync up my iPod with iTuens, my system also decides to restart itself randomly during the sync. Any help
on the issue would be GREATLY appreciated.

Below are additional PC specs:

- OS Windows 7 ultimate 32bit
- CPU, Intel Core 2 - (2) of them at 2.13 GHz
- 2 Gigs PNY RAM
- (any additional specs needed - please let me know!)

I'm out of ideas here; any suggestions would be very appreciated. Thanks!
 

A:DELL XPS710 - Blue screen/ Windows restarts itself/ Freezes on Starting Screen

15 more replies
Answer Match 62.58%

I just replaced the screen on this laptop. Only about 1/4 of the screen on the left side is working and is working right. The system is running Vista and it boots up right. Wonder if the inverter needs replaced. Other 3/4 is a dark gray with no cursor showing. Need to fix for Mom. Please help. Thanks.
 

A:Solved: Dell Studio 1735 Laptop screen replaced, only 1/4 of screen working

Check cable which connect display to mobo firstly. If not cable, rest you already said.
 

3 more replies
Answer Match 62.58%

I am having this problem that the bottom of the screen keeps flashing and there are several obvious light lines across the screen when under grey background. However, it seems to be fine under other colors (in boot screen check it's also fine). Here're some photos for the light lines. As for the flashing problem I cannot capture any photos. (Photos are captured by NIKON D7000 DSLR)

I purchased this Precision M3800 model with 4K touchscreen last April. And this problem repeatedly appears several times. And I have replaced the screen twice before this one.
I have done my research online. It says it's either the screen has something wrong or the wires are loose. I don't think my normal everyday use should make such damage to SEVERAL SCREENS. I use this mobile workstation for some design work at school. Software I use is mainly Photoshop, Illustrator, Rhino Modeling & Keyshot rendering. 
Can anyone help me with this?

More replies