Tech Problem Aggregator

compaq presario 6000

Q: compaq presario 6000

Hello, i have a compaq presario desktop. here are the specs:
512 mb ram
Windows vista
10 gb hard drive
amd athalon xp2 prossesor.

My problem is that is so slow.

A: compaq presario 6000

7 more replies
Answer Match 91.14%

Please delete this post

A:Compaq Presario 6000 Hjthis Log

Since this issue appears resolved ... this Topic is closed.

If you need this topic reopened, please request this by sending the moderating team a PM with the address of the thread. This applies only to the original topic starter.

Everyone else please begin a New Topic.

1 more replies
Answer Match 91.14%

Please help me. Please. Any Ideas would be so grateful !!

Im trying to fix my girlfriends computer which is a Compaq Presario 6000 and it was running a Windows XP and i have no clue what to do next.
First off just to let you all know, i know basics of a computer. My dad works for nasa but he does not know what i talk about when im on the phone and explaining parts to him and he lives 500 miles away from me, but the good thing is that when i used t live with him, he taught me the basics.

Anyways. I have a legit copy of Operating System CD; Windows XP with Service Pack 2 and a legit copy of HP Restore Plus.

I have reformatted my computer and 3 other computers before and I have gained experience to where reformatting a computer to me is a breeze. Until this day

There are two parts to this, One with the OS still in the HD and one without the OS in the HD.

OS still in the HD
So first off, I put in the Operating System CD and i restarted the computer, i was guessing the BIOS had its settings to not boot from CD, but when i took a look, it's first step was to Boot from CD. So I tried again and no luck. I changed in the BIOS to make Step 1, 2, 3, and 4 to read CDROM.

This is where it gets tricky... Ready ?!

unfortunately, it didnt read the Operating System disk and it would give me "DISK BOOT ERROR" but when i put in the HP Restore Plus disk and press enter, it read it. So i fallowed the steps and let the system configuration settings get through and... Read more

A:Compaq Presario 6000 Formatted HD now...

Try a different ribbon cable if it's not that try a different CD drive if you can. See if there is a BIOS update for the machine. Post back and let me know if you still have a problem.

1 more replies
Answer Match 91.14%

Hi

I have my friend's Compaq Presario 6000 here and it won't boot up. It just goes to a black screen. I can however get into the bios and also f8 takes me to the boot menu. If I select safe mode though the same thing happens, just goes to the black screen.

Any help would be appreciated

Thanks

Dave
 

More replies
Answer Match 91.14%

Hello, I just got a brand new laptop around the beginning of june. I started playing it and it was fine for about 3 weeks. Then it started to be really dum. I would be playing a game. Or it will be loading the startup screen and it will just turn off. With no warning or anything. I can just here it making a sound that sounds like if i were to be holding the power button down. And I dont want to take it back right away unless I am 100% sure its not a virus. I'm 'running a scan on it right now. Im typing this message on my other toshiba laptop. Please help me. Thanks.



Post edited by, L4pt0p: Ok it is still scanning but it has found one sucurity risk. I resolved it so hopefully that is it!
 

A:Compaq, Presario V 6000 troubles.

Take it back for warranty service... Don't be foolish. I'm sure you paid a lot for it
 

2 more replies
Answer Match 91.14%

While I am having my other computer upgraded, I want to use my old Compaq Presario 6000 with vista black. Once I get the other computer back, I am throwing this thing away, but it could take about a month, so I want it to at least work. I am using it now, it is very slow.
I had VLC Media Player playing a CD and I was browsing the web. It was horrifically slow. Now I am just using chrome. Right before it crashed, it froze up solid. After a while it "thawed out" but when I went back to google it BSODed on me. The computer did not show the screen for long, but once it started back up I got a box that said:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 984D73E4
BCP3: 88D0CAE0
BCP4: 00000000
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\Mini122113-01.dmp
C:\Windows\temp\WER-73703-0.sysdata.xml
C:\Windows\temp\WERAF22.tmp.version.txt

Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

I know this version of windows isn't legit, but as I said its going to be thrown away after its done being a stand in for my dell. I can't even get a live linux distro to load. Here are my system specs:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista Black Edition™ 2009, Service Pack 1, 3... Read more

A:Compaq Presario 6000 BSOD

While I am having my other computer upgraded, I want to use my old Compaq Presario 6000 with vista black. Once I get the other computer back, I am throwing this thing away, but it could take about a month, so I want it to at least work.

I know this version of windows isn't legit, but as I said its going to be thrown away after its done being a stand in for my dell.

I really wish the person who repaired the computer 5 years ago did not install winbloat vista (and an illegal version at that) on this hunk of junk. He "claimed" that this was the only thing that would install. Click to expand...

Since you intend to junk that computer in a month or less and you admit to it running an illegal version of Windows Vista, it would be a waste of time for us to help you.

It's also a violation of the TSG forum rules to help with an illegal version of Windows, so we can't help you anyway.

I've requested your thread be closed.

--------------------------------------------------------

According to the processor and graphics and motherboard specs for that Compaq Presario 6000 series desktop, it's about 12 years old.

It was designed to run Windows 2000 and Windows XP and was never designed to run Windows Vista.

-------------------------------------------------------
 

1 more replies
Answer Match 91.14%

Recently I recieved this System from a Friend that Bought a New one And I hooked this Compaq Up and powered it Up.
It runs But there is No Display No HDD Loading And the KB Lights Are On My friend said it was running fine but all of a sudden it just went blank and would not do anything He tried the Sleep mode wake up and still nothing this Unit has the AMD XP 1800+ CPU 512MB DDR Memory 60GB HDD and XP Home The Mainboard Is the Elusive Microstar MS 6553 the One MSI Says dont exist, Compaq tried everything to get it back up but to no avail.
Who Knows what the Problem is with this system can anyone tell me how to get it back to its original startup???????
If not I will throw it in the recycle bin and forget it.
 

More replies
Answer Match 91.14%

Is there a way to download the file, and burn it into a CD? I need a Window XP presario 6000 CD-ROM for my new HD... which never came with the package, i only recieved computer pre-installed... so just turn on and registration... now i needa somehow get a CD-Rom for window xp.

A:Compaq Presario 6000 window xp CD-Rom

contact hp for the disks

4 more replies
Answer Match 91.14%

I cannot figure out how to reinstall xp on a Compaq Presario 6000. I have instructions that say to "open the Compaq Restore Solution User's Guide in the Solution package:--I cannot find this. I do not have a Compaq tools either. I want to do a full restore--how else can I do this.

Thanks,
Dennis
 

A:Cannot reinstall xp on Compaq Presario 6000

Set bios to boot as 1st boot device cd rom, pop in restore disc and follow instructions. It will do quick format and reload to factory settings. You will lose all data.
 

3 more replies
Answer Match 89.88%

Hi there,

I am trying to recover a desktop computer and the recovery partition has failed. This seems to be a pretty bad virus and i am choosing to reinstall windows due to the lack of important data on the system.

The computer came with windows xp home and has a 15 digit key on the authentic windows sticker in the top.

Can someone please help me with my next move? Will a retail copy of xp home work with this or is the windows version specific to the manufacturer of the computer?

Many thanks for any help
 

A:Windows XP home on Compaq Presario 6000

16 more replies
Answer Match 89.88%

not sure if this is the correct place to post my apologies if it is not. Here is my problem, I got a compaq presario 6000 desktop from a friend to fix, he had someone install windows xp on it, and the onboard lan internet is not working it needs the correct drivers. My problem is he knows nothing of the computer and has none of the original software. So I went to the hp/compaq page to download the drivers, problem is the pc only says it is a presario 6000. I have looked everywhere on the case and motherboard for the t code or sn# as the web page suggests. I have checked the system info and it only says it is a compaq presario, same in bios. Hopefully someone can help. Some other info hopefully of value it does say it is a zztop/pine amer cto on top, the motherboard says it is an n1996 and has a 686y4 sticker on it. any help in identifying this compaq so I can put the correct drivers is greatly appreciated
 

A:Compaq Presario 6000 motherboard drivers

http://members.driverguide.com/driver/detail.php?driverid=237720

You can try this - updates Bios tho so you could crap out the whole thing.

It seems the mighty HP/Compaq dropped the ball again for support.

edit: searched using the second id code 686y4 and got:

http://h10025.www1.hp.com/ewfrf/wc/...twareitem=39417&product=94110&os=228&lang=en&

http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&cc=us&lang=en&product=94110&dlc=en
 

4 more replies
Answer Match 89.88%

can anyone tell me what kind of ram do i need..apparently i have to have a specific part number according to my pc...
thanx muchly!
 

A:Solved: ram upgrade on a compaq presario 6000?

Go To 4allmemory.com And Use The Memory Finding Tool.you Need To Know What Kind Of Pc You Have And It Will Tell You What Memory Upgrade You Need.
 

2 more replies
Answer Match 89.88%

above.

also: I just got a DVD burner that works on USB 2, and my computer doesnt have USB 2 if I buy the PCI slot, will it work

I have a compaq presario 6000 with nforce 1 chipset. it's pretty old---2002

thanks a lot.
 

A:Will a USB 2.0 PCI card work with my Compaq presario 6000? thanks

6 more replies
Answer Match 89.88%

Hello all,
I have a machine here that was working fine up till 2 days ago. And now it won't boot up. There is no POST, the monitors LED cycyles (indicating it is connected to the tower and in power save mode), and no beep codes. The LED's on the front of the tower are lit (both power and HD) and the power supply fan runs but that is it. The HD does not spin nor does the CD drives eject buttion fuction (indicating no power). The whole unit acts as though it is in sleep mode.

I am gussing the power supply failed, anyone else have any experence to the contrary or have other ideas?

Oh I also tried wiping the CMOS but to no avail. Any help with this is appreaced.

-Gameman
 

A:compaq presario 6000 boot problem

12 more replies
Answer Match 89.04%

Does a Compaq Presario (Pentium 4) have any video card slots?

I ran that cpu-z program and under graphics interface its all grey...not sure if that means I have no slots, or if my integrated 82845g Graphics controller has something to do with it
 

A:Does a Compaq Presario 6000 have any video card slots?

Very easy to find out. Unhook all the cables and then set the tower on a clean surface, there are usually screws or thumbscrews holding the side pannels into place(when your look at the front of the tower take the pannel on the left side off) unscrew those and pull the pannel off. BEFORE TOUCHING ANYTHING ground yourself on something metal like a fosit or the inside of your case(not the inner parts just case) Now look a the expansion slots, if you see a slot that is set further back than the others it is a graphics expansion port - if its the same size roughly as the others but setback its AGP - if its longer and setback its PCI express. Now put the side pannel back on - hook up the cables and you're good to go.
 

1 more replies
Answer Match 89.04%

well i am new to the site and want to know... that what kind of video card that well fit my computer.... it a Compaq presario 6000..

thanks
-chris
 

A:What kind of a graphics card for Compaq Presario 6000?

Hello and Welcome to Techspot!!

I couldn't find much info about your computer.
Open it, and take a look at the mobo (motherboard ), if you see only slots like these, you only have standard PCI slots:

If you see a slot like this brown one (not necessarily brown, can be another color), then you have an AGP slot:

If you're lucky enough, and have a long slot like this one, you have a PCI-Express slot:

What kind of slot do you have?
If you've only have standard PCI slots, check this great thread by Vnf4ultra:
http://www.techspot.com/vb/topic51437.html

Regards :wave:
 

19 more replies
Answer Match 65.1%

Hi, My Computer a Compaq Presario SR1810NX with Windows XP Home Edition SP2 is having an issue with it wont get past the Compaq Logo Screen, like, I press the power button the PC powers on, Fan Speeds up and then slows down as normal, keyboard lights flash as normal and the Compaq Logo along with the v3.48 and ESC = Boot Menu options appear on screen, the things is that it wont get past this screen, it just sits there at the Compaq screen, the keyboard and mouse dont seem to be interacting with the PC since I press ESC or F10 for boot mode or system recovery but the PC wont answer at all, I've already Disconnected power source unplugged mouse, keyboard all but PC is doing the same thing just sitting at the Compaq Logo Screen, the computer doesnt make any sound at all no beeps or anything, it wont let me access Windows at any time, recent installations well could be that I just installed a Mobile Bandwidth Card just a couple of weeks ago, and also just a few days ago I connected my iPod Shuffle 2nd Gen to the computer and the computer wont recognize it at all, not even charging, I know this might be a virus or malicious software, but my computer has barely connected to the internet in the last weeks (I couldn't pay the Internet and I had to use my friend's Mobile Bandwidth Card I mentioned before) all I did while in Internet with the Mobile Bandwidth was some schoolwork and youtube videos, I need help urgently with this since I have to deliver a very important proyect for scho... Read more

A:Compaq Presario SR1810NX Not Getting Past Compaq Logo Screen

Try a power drain.
1. Unplug power cord
2. Hold power button in for 60 seconds or more then let go
3. Plug in power cord
4. turn on the power and try to boot to setup (BIOS)

If it enters the BIOS then you should be able to just press F5 to reset to defaults and then F10 to save and exit. The PC should work now.

However, if after the power drain you still can not get in the BIOS than there is a MAJOR problem which would require some type of repair.

1 more replies
Answer Match 65.1%

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

1 more replies
Answer Match 64.68%

Hi there, heres my problem. I have a compaq presario 6000, windows xp, it seems like a video card problem, I cant play some of my games, like nascar 2003 season, Dirt Track racing 2, and others with high graphics, the screen sometimes will freeze with some areas scrolling and other areas with what looks like rainbow stripes. The video card is an Intel(R) 82845G/GL Processor. I called Compaq and couldn't understand what the guy was saying, his accent was really strong and I told him I was sorry and couldn't understand him. It did seem like he said that the card was built in to the mother board, can I up grade the card to a full meg without changing the motherboard too? I updated the drivers on the current card and still the same problem. Thank you, Bulldog
 

More replies
Answer Match 64.26%

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

14 more replies
Answer Match 63%

IS THIRE UP DATES

More replies
Answer Match 62.16%

I have a Compaq preserio 6000 running XP must be 10 years old and i have just brought a wireless keyboard(usb not ps2) and now it will not recognise it i get the error 304 until i plug in the old keyboard,i was told i need to alter the setting in the bios to enable the usb for keyboard and was shown how to do it on a lappy now when i press f10 i can get into the bios (f10=setup) but i can't find a keyboard setting can anybody help or have i got to have the old keyboard plugged in all the time

More replies
Answer Match 62.16%

this is my older computer. the hard drive makes a loud clicking
 

A:compaq pressario 6000

9 more replies
Answer Match 62.16%

I can't boot my PC from a pendrive, for instance to install a new Linux Distro, etc.First of all, I configure BIOS in order to put pendrive as first device, and then I check the tab Security to ensure USB are enabled.So I can see the pendrive in BIOS and, in fact, I can see pendrives when I'm into Windows, but any way I can't boot the PC from USB, even if I use Plop Boot Manager, a CD which helps to boot from a USB.I'd appreciate any help to solve that issue.Thanks! P.S.:  It's a socket 775 PC, so it hasn't EFI BIOS like later series such 6200, 6300, etc.          BIOS was updated to the last version:   v2.02

A:I can't boot my HP Compaq 6000 Pro SFF from USB

I had a similar problem with my HP 6000.  Another forum offered the tip that if you [Restore factory defaults] for the BIOS, it resets the settings for the USB ports and they work properly again.   Restore your factory default settings, then select the option to Set Defaults and Exit.  Reboot, then go back into BIOS to set your boot order back to USB, and your USB ports should boot properly (if your issue was the same as mine).  

1 more replies
Answer Match 61.74%

Hi everyone.

I want to upgrade HP Compaq 6000 Pro Microtower PSU which has 320W. I want to upgrade in order to accommodate the right wattage for my MSI GTX650.

The problem is that no standard unit with what looks like HP proprietary P1, P2 & P3 outputs


Here is the model of my desktop:http://bizsupport1.austin.hp.com/bc/.../c01883660.pdf


Below is the picture of the current unit of PSU from HP. Can anyone tell me what HP or 3rd party PSU options I can use because I can?t find any info? Thanks

A:Upgrade HP Compaq 6000 Pro Microtower PSU

It would help if we knew where on the motherboard those outputs go - what do they power?
P1 looks like a standard Video card output.
P3 looks like a standard CPU power output.
No idea what P2 is.

You also need to pay attention to the power supply form factor. A standard ATX supply has a standard screw pattern to attach to a standard ATX case. But some manufacturer's use their own proprietary form factor. You need to check.

1 more replies
Answer Match 61.74%

Hi dose any have any suggestion or ideas? I have my laptop for 2 years, in was left on for 5 hours without me using I left it on the internet, when I got around to using it if freezed on me, so I had to swich it off from the button as I was unable to shut it down! I turn it back on the power light come on I can hear the fan for a short while then it switch it self off, dose any one know what could be wrong with it?

regards
Golden
 

A:HP Compaq NC 6000 laptop will not boot up

Remove the battery and the AC adapter, then hold down the power button on the laptop for 30 seconds. Reattach the AC adapter and try booting the laptop
 

15 more replies
Answer Match 61.74%

I have a nc 6000 that wont come on by itself until i apply pressure on the motherboard in the area around the keyboard/ power button. Any experience with this kind of problem?
James
 

More replies
Answer Match 60.9%

I purchased a new HP 6000 Pro AIO a year or so ago.  Standard memory was 2 gig.  Has been upraded from W7 Pro to W10 Pro.  Recently I decided to upgrade to 2x4 Gig Memory Modules. They installed fine - and the machine is working well and much faster.   However, the System Info and Task Manager both Show Installed RAM as 8.0gig with only 3.44 Gig Useable. I'm probably not getting all the memory resources I should be.  Can anyone advise what I can to to increase the useable RAM. Thanks

More replies
Answer Match 60.9%

I'm repairing a Compaq 6000 with the N1996 motherboard. It has a two pin jack for the power supply fan which also affects the CPU fan. The pwr supply is bad and I placed all the components in another tower. I read some threads of others who experienced the same problem. Did anyone resolve this issue? I read a thread from Dcrewchief--it stated that you should adapt from the two pin to a four pin straight out the power supply. I did not quite understand what was meant by this; so, if anyone has a good answer please let me know.

Edit: Please use proper thread titles from now on. Thanks.
 

A:I'm repairing a Compaq 6000 with the N1996 motherboard and need some help.

There are two and three pin to 4 pin molex adapters. you can usually find them at any decent computer shop.
 

1 more replies
Answer Match 60.06%

Hello I am dealing with 2 beeps of Compaq 6000 desktop tower.  I tried to remove every components step by step and the beeps are still there. I removed one and the two memories, then I removed the hard disk and DVD connections and nothing. Also I've tested the power supply with a multimeter and the wirtes give the expected tension (V) (12V and 5V), I did a bridge and the power supply works. I uploaded this video: http://tinypic.com/player.php?v=1zf6ly%3E&s=9#.Vvj11OKLRrY Please any other idea to repair this unit?

A:Compaq 6000, 2 beeps with red light [video inside]

I see in the official manual that this two beeps could be about heating problems. http://www.manualguru.com/hp/compaq-6000-pro-small-form-factor-pc/troubleshooting/page-58 Red Power LED flashes twotimes, once every second,followed by a two secondpause. Beeps stop after fifthiteration but LEDs continueuntil problem is solved => Processor thermal protection activated: A fan may be blocked or not turning. OR The heatsink/fan assembly is not properly attached to the processor. => 1. Ensure that the computer air vents are not blocked and the processor cooling fan is running. 2. Open hood, press power button, and see if the processor fan spins. If the processor fan is not spinning, make sure the fan's cable is plugged onto the system board header. 3. If fan is plugged in, but is not spinning, then replace heatsink/fan assembly. 4. Contact an authorized reseller or service provider. Then FAN works if I plug to external power supply, on the computer it tries to work, it move a little but then stops. 

4 more replies
Answer Match 57.12%

sir, can u help me, i can't fint my driver for compaq presario v3760TU
previously, i used vista home basic but i convert to window seven.. but i can't find my driver in hp/compaq driver web.. plzz help me..
-sory for my english so bad..

A:compaq presario

Were you at this Hp/Compaq download page ?


Software & Driver Downloads Compaq Presario V3760TU Notebook PC - HP Customer Care (United States - English)&

6 more replies
Answer Match 57.12%

Hi. Does anyone know if a Compaq Presario SR1150NX does the display system support component video (Y, Pr, Pb) signal output function? Thanks
 

More replies
Answer Match 57.12%

my compaq presario cq57 says system disabled 62359871..plz help. thank you











Solved!
View Solution.

A:compaq presario

@sharp66? Enter   73031277

3 more replies
Answer Match 57.12%

I have a compaq presario. I have 2Gig memory. I changed services from ATT to comcast internet. now my pc needs to be wiped clean and set up again but when I got the computer I did not get the discs. how can I do this without discs> it wont open up the internet even though I am connected.

Please help
 

A:compaq presario pc

8 more replies
Answer Match 57.12%

How do you open the casing on compaq presario 5304. I don't want to breakit.\

Thanks.
 

A:compaq presario

Link to tell you all about your computer. http://h10025.www1.hp.com/ewfrf/wc/...ry&tool=prodinfoCategory&dlc=en&product=93186
 

1 more replies
Answer Match 57.12%

How do you access the Bios on a Compac Presario 4110. I keep getting the message 162 Sytems Options not set. 163 Time and Date not set. Having visited Compac they were not a lot of help. Downloading the software recommeded by them was a waste of time, still got the above message. Tried all the usual keystrokes etc no good. Any suggestions would be appreciated.
 

A:Compaq Presario

9 more replies
Answer Match 57.12%

ok I hace a compaq that is all messed up. lets see one day the monitor would not work after a storm. Bought another, For a while the screen would be blue but change back to normal. The pc also would have a hard time starting up after it was in idle. We would do a hard start and for a while that worked. Now when I try to start it it turns on but the monitor says no vga/dvi input. There is also none of the preverable beeps that are supposed to be there so in short (well long)the motherboard is fried? So do I use it as a planter in the yard or is there a way to get it up and running. It runs on XP media center it has a micro ATX form factor motherboard it is also an AMD 64 Anthlon. ram is 256 mb 1Rx16 pc 4200 ddr2 533 mhz. With all that said can I just replace the motherboard and reinstall the reinstallation disks and be up and running? ( if it could only be so easy) What about the cpu. i know many questions here thanks for patients. Please help me. Tina
 

A:compaq presario

does your system have agp or pciex (or even pci) slot free? Is the graphics on board? It sounds like a graphics card problem, even if it is onboard. I'd try a replacement card (even if it's just a pci card) and see what happens...
 

1 more replies
Answer Match 57.12%

I have purchased a Compaq Presario 600 with an Athlon XP 2200+ processor. I do not have a copy of Windows XP to wipe it with. Is there any way with the installed XP that I can refresh this system and remove data frome previous owners? Or Can I load Win 98?
 

A:Compaq Presario 600 ??

Compaqs usually have a hidden partition with all the factory loaded software on it in an image format. As long as it does and you can figure out how to access it you could probable do that - but you almost likely need the XP Product key and may need to reactivate XP after the recovery. XP can only be install on one machine at a time - so if they are still using it you are out of luck.

Watch the boot up for any recovery messages or take a trip to www.Compaq.com and look up the info for your make/model.
 

1 more replies
Answer Match 57.12%

I friend of mine purchased this Presario in 2004. She hasn't had internet since about 2006, so she hasn't had any of the updates since then. I brought her tower home with me since I have internet to load her updates. We're trying to get it internet ready. When I brought it home last week nothing would open. So yesterday she gave me the system recovery disc. I started with the Standard Recovery, but there were too many files that it couldn't recover. So I then decided to do a full recovery. After the full recovery it was rebooting and it told me that not all the system could reload and I couldn't hit okaybecause it wouldn't read / acknowledge my mouse. So, I unhooked her computer and rehooked mine to see what her alternatives were. I found a website, they wanted to know all the things it wouldn't oload. All I can remember is that it was things that could me downloaded later like: Norton, AOL, Adobe, MSN, and QuickTime.

So, I unhoked mine and rehooked her's up (and booted up my laptop). When her's came back up it's saying: NTLDR is missing Pres Control + Alt +Delete to Restart

My question for you is there anyway I can save her conputer? She doesn't have a lot of funds, being a singe mother of a 7 yr old and I'm just a good friend trying to help her out.

Thank you in advance for any help you can provide

A:Compaq Presario

I decided to see what happened when I ctrl alt delete and then decided to do another recovery. Here's some more info (could not recover errors):
1. C:\WINDOWS\Help\SB\Training\WXPPer\Content\Wave\[email protected]
2. C:\WINDOWS\System32\ntdll.dll
3. C:\WINDOWS\System32\ntkrnlpa.exe
4. C:\WINDOWS\32\dllcache\dinput8.dll
5. C:\Windows\systme32\dllcache\licdll.dll
6. C:\WINDOWS\system32\dllcache\locator.exe
7. C:\WINDOWS\system32\viaservc.dll
9. (Black screen instead of error message)
9. C:\WINDOWS\Installe152ec/msi
10. C:\WINDOWS\Installer\1b2cc.msi

then all of after about 20% a big blue screen with following:
A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. IF this screen appears again, follow these steps:

Check to make sure new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup... Read more

3 more replies
Answer Match 57.12%

ok when i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do. Thanks
 

A:Compaq presario help

16 more replies
Answer Match 56.7%

hey I have one of these and was wondering how high i can raise the processer speed i preveosly thought i could bring its 566mhz to a 1.1ghz but that was risking it just wondering i just might update it since the price has gone down
 

A:compaq presario 7594

NOPE, can't upgrade that dog to anything that would make a difference. Your manual or their web site should show you the upgrade path and what you can go to.
 

1 more replies
Answer Match 56.7%
Answer Match 56.7%

ok the dilemma is simple ok i bought this new laptop for the wife then it came with a built in webcam truth is i don't want that webcam so i bought another webcam that i am trying to use on msn but the laptop states found new hardware but doesn't install my webcam is usb ported it says m style on the cam the only thing it uses my wife states that she can access the cam thru the control panel but not in msn why is this occuring if someone could get to me asap would be greatly appreciated thanks in advance
 

A:Ok new laptop compaq presario

You may need to disable the original webcam

You can disable it by going to: Device Manager (Start->Run-> Devmgmt.msc)

Then locating your Webcam (that you don't want to use) and then right click on it and select disable

Then go back to MSN and use the settings to set up the new webcam
 

1 more replies
Answer Match 56.7%

Hello. A buddy of mine has an old Compaq Presario 7470 that he is putting a new mobo in. Apparently, the old case has color-coded front panel wires. He has separated the wires and now he does not know which ones go where (in terms of going to reset button, power button, Etc). We have looked everywhere on the net for some sort of schematic for the Compaq case to figure out the color-coded wires. However, not even Compaq site has any info. Also, to note, the wires apparently terminate on some sort of small printed board before going to the lights and buttons. If anyone has any ideas I would appreciate your help.

Thank you,
LS
 

A:Compaq Presario 7470

The front panel wireing is one problem with trying to put a non Compaq board in a Compaq case . . the power supply may be another . . a lot of the OEM's use a proprietary Power supply with non standard connectors.

You might be able to Google Compaq Front Panel connectors to see if someone has worked it out ( i know of one guy who did for Dell )

He will almost certainly be better off buying a new case for the new board, and using whatever hardware he can with the new system.
 

3 more replies
Answer Match 56.7%

Have a Compaq Presario 1020 - laptop. Info is as follows -
Series 2900A
Model FBV1433VQL1J
Serial V644HZD50299

Need a maintenance manual. Any help would be appreciated. Thank you.
 

A:Compaq Presario LAPTOP

Google Compaq for a contact number - ask them to send you a manual..
 

1 more replies
Answer Match 56.7%

Hi

After unsucessfully trying to get rid of some nasty Malware (Antivirus XP Pro 2009 to be precise) I'm currently trying to perform a factory reset on my Compaq Presario SR1909uk which had Windows XP.

I'm performing this from the recovery discs I created when I bought the PC.
However, I keep getting various error messages saying either

'Cannot copy file C:\1386\APPS\APPS15417\src\VIRUSCAN7.DAT or

C:\1386\APPS\APPS15417\src\Setup\asCore\Antispam\btevclid.dll\MANIFEST\asnmobj.spm

I keep aborting when I get these messages and the progress perecetage remains. If I do this until I reach 100% do you think it will work?

Other than buying some new recovey discs from Compaq or taking it to be fixed, are there any alternatives please?

Thanks

A:Compaq Presario SR1909uk with XP

Try cleaning your Recovery disc.

3 more replies
Answer Match 56.7%

If any here has an HP Pavilion or Compaq Presario PC or Notebook (current models), they will notice that the fan kicks in when needed. The fan doesn't really annoy me as much on my Compaq laptop, but on my HP desktop it is really annoying and loud. I think it forgot that it was only supposed to come on when needed because it is now on almost all the time. Can someone explain to me how this fan works in more detail and how I can possibly adjust when it comes on or at least the fan speed, SOMETHING!!! Thanx in advance.
 

A:HP/Compaq Pavilion/Presario Fan

If the fan kicks in more then it used to it might mean that the computer needs a cleaning. These fans are temperature controlled and only kick in when a sensor detects the temperature to be at a certain level. Sone fans need to be on at all times - like the one on the CPU - but it may be possible to control it speed with software or BIOS settings.

Speedfan comes to mind, do a google search for it. It will list the motherboard temps and allow fan speed adjustment if the board supports it. If you have a case fan you can control its speed, as for the CPU fan - thats best left on a full speed.

First, open up the case and see if it needs a cleaning. You can also replace stock fans with quieter ones if they are too loud or wearing out.
 

2 more replies
Answer Match 56.7%

Hello,
I have recently upgrade my OS from Vista to Windows 7 Ultimate by clean install method.
I think so far everything works except microphone which I solved by installing updates from windows update.
So my question is, Should I install some drivers or some updates from either compaq or hp sites or wherever also? Should I try to find drivers specefic for my computer or go with the drivers which came with windows 7?
My computer model is: Compaq Presario CQ61

Thank you very much!!!

A:Compaq Presario cq61

  
Quote: Originally Posted by jav


Hello,
I have recently upgrade my OS from Vista to Windows 7 Ultimate by clean install method.
I think so far everything works except microphone which I solved by installing updates from windows update.
So my question is, Should I install some drivers or some updates from either compaq or hp sites or wherever also? Should I try to find drivers specefic for my computer or go with the drivers which came with windows 7?
My computer model is: Compaq Presario CQ61

Thank you very much!!!



If HP/Compaq have the drivers for your PC, then yes.

4 more replies
Answer Match 56.7%

I hit the power button this morning and nothing happened. Tried unplugging and holding power button in and still nothing.
 

A:compaq presario will not turn on

Please post your system specs, exact model Presario, include any upgrades or modifications please.
 

1 more replies
Answer Match 56.7%

I have a compaq presario c300 notbook. It will not boot. I get the compaq screen, then nothing. It will not boot to the cd either. The backlight comes on, so it's not that. Please help. I'm lost.

A:compaq presario c300

Welcome to TSF....

To get it to boot from the cd you have to change the boot order in BIOS. This can be done during boot up when you can open the BIOS and set it.

The cd you used is it the recovery cd for the computer?

1 more replies
Answer Match 56.7%

I was wondering how people thought of the Compaq Presario laptops as i am thinking of purchasing
 

More replies
Answer Match 56.7%

A friend has a Presario X1300. It has a small problem. The power button only works once in a while (perhaps 1 in 20 presses). I thought perhaps it was a cold solder joint but even after touching up the button's pads its still has the problem.

It could be a bad switch, it looked like the switch had previously been replaced (although he hasn't had it serviced except to put in a new hard drive about a month before the switch went bad).

I found a post that indicated that someone found schematics for the motherboard and I was hoping that someone here would be able to point me in the right direction. I didn't find them on google. I'm going to replace the switch first, but if that doesn't work I have to assume there's some other problem that will need debugged.

I hate to see such a nice laptop go to waste because of a stupid power on problem.

I have found the service manual online. Its great, but has no schematics.

Thanks for any ideas you can offer.

Raydude
 

More replies
Answer Match 56.7%

i have a compaq presario 3630AS desktop. It came with quick restore CDs and a recovery CD. If i have to re-install win xp should i use quick restore CD or the other ????? Pls help

A:compaq presario 3630AS

Compaq Recovery CD options
The Compaq Recovery CD enables you to restore your system files from a separate partition on your hard drive. The four options on the Recovery CD are listed below.

Restore option Description
Emergency Diskette Creating this diskette is important as it allows you to save your computer's unique setup information for use in the event of an emergency. Store the diskette in a safe place.

User Backup Backs up all information and files on your hard drive and stores them in a separate partition on your drive.
User Restore Restores your hard drive to the state it was in when you last used User Backup.

Factory Restore Restores your computer to its original factory-installed software state.

1 more replies
Answer Match 56.7%

I have a compaq presario. The bios are poop. Does anyone know if there is a way to update the bios with areal manufacturer? Or am I stuck with compaq's bios? It would be really nice if there was a way to find out who makes the bios for them and update it. Any info would be great. Thank you in advance!
 

A:Compaq Presario Bios

You need to get the BIOS from Compaq. While the board maybe MADE by another company, who knows what slight changes to the specs were made.

When you do your next upgrade, build your own and get a real BIOS.

Like working on a NEW Dell PC, almost NO Options, no Temp monitors nothing.. junk... its a DELL!
 

1 more replies
Answer Match 56.7%

I bought this compaq presario 1800T from a garage sale and when I first turned it on it took at least 30min. for it to completely boot up and run fine. Cna some tell what to do for it to run faster. Also it has no memory chip and it runs on xp and was designed for ME or 2000.
Im also trying to get internet on it.
Please Help!
 

A:Need Help with compaq presario 1800T

how can it run with no memory? You will at least 1 gb of ram to run XP well. 512mb at the minimum to be acceptable.
Read the upgrading/troubleshooting ram guide in the guides forum before installing ram.

read the speeding up computers/system guide in the guides forum to see how to speed up your system. It is old, so bear in mind it really is only good for office work.

It has a built in telephone modem port and a LAN port for internet.
If you want to go WIFI (wireless) you need to buy a WIFI card for it.
 

1 more replies
Answer Match 56.7%

hi,

Iam siva.I need all the drivers of compaq presario c770us because some of the drivers are not functioning properly it has become a serious problem for me for many days.I will be vey grateful if you suggest me a positive reply.Thank you.
 

A:compaq presario drivers

10 more replies
Answer Match 56.7%

i have a question...a while ago my Presario battery died -- it wouldn't charge or discharge, the laptop could only work on the AC, but the indicator showed the correct % of the charge... I bought a new battery and it worked fine for a week, but I decided to reinstall Windows XP, and from then on, it's been a rollercoaster ride for me (( First, it worked fine, but the laptop started to freeze every 20 minutes. I followed the COmpaq's people advice and updated BIOS for some battery controller thing and updated the video driver. From then on, the problems with my new battery just started to overwhelm me First, the battery wouldn't charge when the laptop was ON. Then somehow it did charge. I decided to calibrate it, and now it doesnt want to charge -- on or off. The red light indicating the battery is flashing -- as it's not charging, and the indicator says "0" % of course.
Does anyone have any ideas?? Please? This only started after I reinstalled the Windows, so I am sure it's not hardware or the battery, everything worked just fine ((
Please help me!!!! Thanks... I'm desperate....
 

A:Compaq Presario 700 and battery

6 more replies
Answer Match 56.7%

Hi gang!
well it been awhile since i been here but at least i remembered where to go ..

Anyway here is my problem that I am stumped with ....

Reformated a compaq presario 2.1 gig/128ram/40gighd/ with onboard video and sound.
Everything is up and running fine except i cant seem to get the sound to work, says that it is installed and working properly but still doesnt work.
Installed different speakers ..no joy....went to compaq downloaded new software drivers and installed...no joy. Any ideas?

Thanks in advance
 

A:compaq presario no sound

I almost hate to ask if the volume control is set to mute so we'll pass on that one.

If there's a headset socket on the front of one of the CD's, can you hear anything through that?
 

2 more replies
Answer Match 56.7%

I need help I have a Compaq Presario R4010US Laptop. The keyboard does not work for some reason, I plugged an external usb keyboard into it and it works fine. Could the ribbon cable that goes from the keybd to the motherbd be bad?

Fwilli2

A:Compaq presario R4010US

hi Fwilli2 welcome to TSF,

take the keyboard off and re-seat the ribbon cable. you might want to try uninstalling the keyboard from device manager and then restart computer see if it work before you take keyboard out.

6 more replies
Answer Match 56.7%

Hello,

I have a Compaq Presario 1247 Notebook (laptop) with Windows 98 Second Edition with a 4.3 Gigabyte hard drive that was logically partitioned into 2 drives (C: and D: ). Earlier this year I used my CD Burner to copy all of the Quick Restore files from the D: Drive to a blank CD-ROM (CD-RW) disk and then removed the partition from the hard drive with a program from the Compaq Website. My CD-Burner is connected to my Notebook via a PCMCIA USB 2.0 Card, it has 2 USB Ports on it, one port is being used by my CD-Burner the other port is not being used.

Last Friday (09-24-2004) my Notebook caught a virus while I was on the internet and it was corrupted. MS Windows Explorer error message came up when I tried to look at my hard drive. The error message also came up when I rebooted, therefore no desktop icons appeared. So I reformatted the hard drive C: and put the Quick Recovery CD-ROM Disk in the internal CD-ROM drive. However, the Quick Recovery Disk displayed a message that it could not find the Quick Restore files and to contact Compaq Customer Support. I reformatted my hard drive again this time with the /quick format switch and /make system disk switch and then copied all the files and subdirectories from the Quick Recovery CD to my hard drive. Now before I even tried to run FDISK to repartition my hard drive into 2 logical drives I thought I would put the CD (CD-RW) containing all of the Quick Restore files and subdirectories that I burned earlier this year (before I r... Read more

A:Compaq Presario 1247 - Need Help

have you tried the ultimate boot CD:

http://www.ultimatebootcd.com/

It containes many utilities that might help.

it is bootable so it should load

Steve L
 

2 more replies
Answer Match 56.7%

Hi, how do you restore to factory settings a (COMPAQ PRESARIO SRI617CL)?

A:(COMPAQ PRESARIO SRI617CL)

If this computer has a Recovery Partition, when you boot the computer on the logo screen you should see a message Press F2 for setup and Press X for Recovery (X being F11 or whatever key it says) If you don't get that message, then this computer does not have a Recovery Partition (if you can still boot the computer you can look in Disk Management to see if there is a drive called Recovery)
Other then that you will need the recovery discs you made when you got the computer. How to Run Compaq Recovery Disk | eHow.com

1 more replies
Answer Match 56.7%

Hi, i'm having a problem turning on my laptop. I'm using a Compaq Presario C502US. I've been using the AC adapter that came with the laptop but eventually the AC adapter became loose and broke. The charging icon (lightning symbol) wouldn't turn on anymore and I think the laptop has now run out of power. I've finally received a new adapter and when i plug it in the charging icon lights up. However the laptop still won't turn on. I've waited for about 2 hours but it still won't turn on. When i click the power button, the Power turns on and then it blinks. The Fan turns on for about 3 seconds but then it goes off and the power light blinks and the monitor won't turn on. Can anyone help me with this problem?
 

A:Compaq Presario won't turn on

Remove battery and power adaptor (ie all power out)

Hold down the ON button (to disperse all internal power)
Plug the power adaptor back in only (and to wall socket!)
Turn on!

If it works, turn back off, and re-install battery, turn On
 

5 more replies
Answer Match 56.7%

i have a compaq presario SR5210NX with windows vista home premium ,it has a problem in/windows/system32/ntkrnlpa.exe,the state is 0xc0000225 and the information says the kernel doesnt responde or isnt working .it says introduce the installation disk windows ,but i dont have it and i couldnt enter to the recovery system

More replies
Answer Match 56.7%

Hi this is my first post so bare with me.

I have a compaq presario 2580us laptop first of all with a pentium 4 in it.

My question is this. My laptop has 3 fans in it and they all used to come on in the past. Only one(the biggest) has been working not sure how long it has just been the one either. My temps get up to around 127F. I am just just wondering if there is a way to check out why the other 2 fans are not working. If there is some setting that I could check that would be great. Any assistance would be so nice.

Thank you,

Jackie
 

A:Compaq Presario Fans

I did this on a machine at work 2 weeks ago. Check hp.com, do the auto detect thing, and update the bios. should solve the problem.

hope it helps.
 

9 more replies
Answer Match 56.7%

We have an old 2001 compaq 5020 computer. The last screen you see when you shut it down is , it is now safe to turn off your computer and then you have to shut it down manually. How can we change this to turn off automatically. We are running Windows XP.
Thanks
Bilmac

A:Compaq Presario 5020

Hello bilmac1. Probably, when Windows was installed, it failed to recongize the BIOS as ACPI compatible. Or simply, APM is not enabled: check under "Power Options Properties" if the tab "APM" exists; if so, check the option "Enable Advanced Power Management Support" (if it's checked, uncheck it, weird as it sounds).

1 more replies
Answer Match 56.7%

A mate of mine has just bought himself a Compaq Presario and asked me to give him a hand at getting it up & running so I said I would, (really a classic case of the blind leading the blind). We did get the thing going & connected to ISP so miracles do happen. What I would like to know more about is the partitioned HD that it has. Am I right in thinking it is a backup of some sort.
 

A:Compaq Presario HD Partition

8 more replies
Answer Match 56.7%

I have a Compaq Presario C74EM which I just installed Win 8 RP. The sound did not work.

Eventually I was able to find and install drivers - sound still didn't work, but after following the advice on a forum post, I put the computer to sleep, waited a few minutes, woke it up, and sound now works.

This computer came with Win Vista home. Supposedly the Compaq Win7 drivers will work with Win8. Compaq (hp) has utilities that will go through any/all drivers, and update to the latest.

Does anyone know how to get this going under Win 8?

More replies
Answer Match 56.7%

i have recently formatted my hard drive and reinstalled xp home, i have found all the necessary drivers etc but unable to use my mouse, on the device manager a yellow icon appears stating unknown device, iv searched everywhere for drivers etc but all came blank, i went to the compaq site and downloaded the mouse/keyboard driver from there but then got an error stating unable to find version of runtime to run this application '' iv downloaded the most recent .NET framework and still nothing, iv searched for more help but unable to find any results, anyone got any pointers if im doing something wrong ?

A:compaq presario S5600UK

What is the make and model # of your mouse?
In Device Manager, right click the Unknown Device and Uninstall it. Now remove the USB cable for the mouse from the computer end. And restart the computer. When the computer comes back up, plug in the mouse into the Back USB port of the computer and not the front or through a hub as these ports are weaker. It should install. if not, go to the mouse manufacturers support download drivers site and type in your model # and download the driver.

1 more replies
Answer Match 56.7%

Please i desperately need help, have got compaq presario 3015us(never buy it) P4/512ram/60 gb h.disk etc etc.... the problem started when i woulds scan norton antivirus, the system would juz freeze, tried it a lotta of times but same prob, then i started gettin error msgs sayin ISAAC.DLL error...then RUNTIME.DLL error.. then i wanted to restore it to a previous date, but there the calender would be stuck at oct and i wanted to restore it to september...

then i tried using the compaq recovery disk, the disk after 2 mins of running, would shut down the computer again, same thing happenned 3-4 times and next time gave some error sayin cant access drive H (dont have drive H) and enter but nothing happenned.... then i got my hard disk formatted but now ot shows "NO DISK SPACE" whereas i have 60gb and same problem of shutting down keeps happenning when the disk runs...pls help....

is it a prob with the motherboard or hard disk or juz something else....pls pls help!!!!
 

A:COMPAQ PRESARIO 3015us(HELP!!!!!!)

hmmm, when you formatted the hard drive, did you FDisk it prior? When I worked for Gateway tech support, we had a little saying, "if nothing else, then FFR"... which meant FDisk, Format, THEN reinstall OS, in that order. Give that a shot with a windows ME bootdisk. You can find the download at bootdisk.com
 

1 more replies
Answer Match 56.7%

Not sure if anyone can help here but worth a try.
I brought a new compaq presario desktop pc just before xmas. I got sick of all thier crap on it so I re-installed with another copy of windows xp prof sp2. Now I am having problems and want to go back to the original installation on the compaq.
Didn't do any restore disks as no-one explained this to me then. The install partition is still on the compaq but when I load up comp and try to press F10 to do it, it doesn't work (just keeps loading into windows). I can not figure out how to get the reinstall to start and am not sure how to do it manually. My brother has tried to manually start it in windows but it doesn't like this. Have tried changing the boot drive using the Esc and F1 keys as per start up options but it has the drive as grouped and can not specify H drive (where compaq restore is).
Any suggestions welcomed before I have to find more money to buy disk!
My brother has suggested that maybe we can delete the c drive partition therefore forcing the h drive to run, but want to leave this as a last result in case it doesn't work.
Thanks to anyone who reads this.
Ange

A:Need Help With Restore Of Compaq Presario

Ok Frad, if you want to restore the system to the way it was when you purchased it, the best way is to place the restore cd in your drive and restart. when the option comes up press what ever key you ned to to enter setup. scroll through the setup untill you can change the boot options. place the cd drive as your 1st boot option. when you have done that, save and exit setup. when the system reboots, you will be given the option to restore. READ THE WARNINGS CAREFULLY, THIS WILL FORMAT THE HARDRIVE AND ERASE ALL THE DATA THAT YOU HAVE. I recomend that you burn a copy of all your important files prior to doing this and good luck.

Printboy67

4 more replies
Answer Match 56.7%

the DVD drive stopped working and now the hard drive has errors.

I got an external USB DVD drive on it, but chkdsk cannot seem to repair the hard drive.

Anyone got any idea how to fix it or recover data off of the hard drive. I got a year's worth of work on it, and none of my files show up. Just "File record segment XXXXX is unreadable" errors about a million of them.
 

A:Compaq Presario 2500

Suggest you stop using the drive until you can recover the data.
It is likely that drive has failed or is going into total failure.
You can purchase a replacement drive for $42 to $75 depending on size and whether you get the 5400 rpm or the 7200 rpm in a 40, 60, or 80 GB model.
You can obtain an adapter to put the drive into a desktop unit as a slave. The adapter converts the mobile 2.5" hard drive by adapting the pin set for the desktop EIDE cable. Adapters are available many places, including www.geeks.com, www.cyberguys.com, www.frys.com, www.outpost.com, and others... cheaply at $2.45 to $9.99 depending on where you get one.
Then you can usually drag and drop the data from the mobile drive to a desktop drive, or use drive recovery software, then you can burn a CD to then migrate it to your new drive... or just use a USB transfer.
( We work on a great number of the Presario 2500's with identical problems. Did you know there are 434 different models of the Presario 2500 series of laptops?)
With the new drive, you just use the recovery set that came with your laptop, or buy the set for about $30, including shipping, from the Compaq parts department.
But you likely will not ever be able to use that drive again. Thus, you do not want to stress it further by more restart or rescue attempts.
 

4 more replies
Answer Match 56.7%

Hello;

I have had a Compaq Presario 1500 laptop for about 2 years now, and I am quite un-satisfied when it comes to multi-tasking several applications at the same time. Sometimes it is so slow that I cannot minimize a full-screen application to read up on something on the net. I currently only have 256 megs of ram, but I read on the internet that tihs model could have up to 1 gigabyte. This is great, but therein lies my question. The laptop has two ram slots, one of which has been empty since i got the computer. Could I get a gig of ram and still keep the 256y meg stick as an added boost? or is the 1 gig the maximum for both slots?
 

A:Compaq Presario RAM upgrade

Well if your laptop supports a maximum of 1gb then that means 512mb per RAM slot.
Here are a few links on Newegg which is the Maximum Memory you could get for your Laptop. This is if you are in USA
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145482
http://www.newegg.com/Product/Product.aspx?Item=N82E16820134037
http://www.newegg.com/Product/Product.aspx?Item=N82E16820172102
 

8 more replies
Answer Match 56.7%

Ive been wanting to get my old computer running for awhile. i took it in, to get checked, and the guy said that the hard drive was blown. He told me that i had to get the full quick restore disc set if i wanted to put a new hard drive in to get it working(he said it consisted of 2 discs, he explainted to me why but it went in 1 ear and out the other). Well i called and told them that i need a full quick restore disc set for the model number 5170. I got it in the mail today but there is only 1 disc . Is there really 2 quick restore discs or did that guy have no idea what he was talking about? Also can i just use the 1 quick restor disc to put in a new hard drive and get my comp running again?
 

A:compaq presario quickrestore cd

8 more replies
Answer Match 56.7%

I have an older compaq presario 5000 (5wv260), i want to upgrade the memory in it. I know it takes sdram, 168 pin, but i dont know if i need parity or non-parity. OR ecc or non-ecc... anyone know what this computer takes?
thanks
 

A:compaq presario memory help..

6 more replies
Answer Match 56.7%

I recently bought this machine and at first it worked fine. Last time i used it no probs and even shut it off correctly. The other day I went to turn it on and nothing. The led light that says that it is pluged in is on but now it is not charging the battery. I can get it to come on enough to hear that it is running but it is not booting and the screen remains black. I contacted that previous owner but she said she never had any problems with it. I want to see if it can be fixed, cheeply if possible, befor I do anything else. Thanks for the help.
 

A:compaq presario 1200

Sounds like your gonna have to get you hands dirty and take the cover off. Remove the cover and start pulling out parts. ;-)

The best way to troubleshoot a machine is to only boot with the bare requirements.

CPU, RAM, VIDEO CARD...over course power supply...

I'd take out all other parts and PCI card, remove all hard drive cables and floppy cables. Take note which way the RED LINE goes when you put it back together...

If you have MOVED the computer recently, IE transported the computer in the back of your car truck, you might want to try and RESEAT the video card, and RAM. Shipping a computer in the mail and it arriving DOA at the customer more than likely points to a video card that needs to be reseated. Lucky for us, most new motherboard come with AGP slot lock thank goodness...
 

2 more replies
Answer Match 56.7%

presario 1270, win se (non compaq) os, lcd went dim over 2 weeks and then dark while i was still running compaq 98 os. works well on external crt and current os. lcd is working but too dark to use. suspect inverter? or some other problem with backlighting. any suggestions to diagnose or repair would be appreciated. D.Rees
 

A:compaq presario mod #1456vqlin lcd

Backlight is out no doubt, screen look fine with flash light held up to it? Not much you can do for that, doubtful you can replace that unless you are pretty seriously technical.
 

1 more replies
Answer Match 56.7%

Hey all,
Does anybody know if all of the motherboards in the Presario V6000 laptop series are the same size and shape?

More specifically, does anybody know if a V6000 motherboard would fit in a V6310 case?

If you need more info, let me know.

Thanks!
 

More replies
Answer Match 56.7%

Is this computer any good if used for a bit of gaming, internet, work, CAD software? It is $700Cdn and include monitor, printer and speakers.
Also is it true that this computer with not come with discs of the software included, all the software is on the HD.

Processor
Intel ® Celeron ® D Processor 340
Operating System
Microsoft ® Windows ® XP Home Edition
Memory
512MB PC2700 DDR SDRAM memory (expandable to 2GB)
Hard Drive
80GB 7200 rpm Ultra DMA hard drive
Multimedia Drive
CD-RW 48x32x48x
DVD-ROM
DVD-ROM drive 16x max. speed with InterVideo WinDVD SE software
Video Graphics
Integrated Intel Extreme Graphics with up to 64MB shared video memory
Network Card
Integrated 10/100Base-T network interface
Sound
Integrated audio
Fax/Modem
High-speed 56K modem
Included Peripherals
Compaq keyboard
Compaq scroller mouse
Software
Digital entertainment
Apple iTunes for Windows: Digital music jukebox for importing music, organizing your collection and more
InterVideo WinDVD SE player: Play DVD movies
Sonic RecordNow: Burn music CDs and archive your data to CDs
RealPlayer: Find, play and organize digital programming - music, sports, entertainment, news and more more
Adobe Photoshop Album Starter Edition
WildTangent GameChannel: Preview 10 computer games

Productivity software
Microsoft ® Works 7.0: Includes a word processor, spreadsheet, database and calendar
Microsoft ® Office 2003 Trial: Get a 60-day trial version of Microsoft ® Office Student and Teacher Ed... Read more

A:Compaq Presario SR1220NX

I got mine on Oct 26,2004. So far i am very pleased with it. Not into gaming so I can't answer that question. I got $300 US rebates off the price.which brought the cost down .
Yes the software comes on the HD. There is a 'System Recovery " disk that comes with it but I'm not sure exactlly what that has on it..It does restore the orginal files that were on the computer when it came from the factory so it seems that should be all that is necessary to keep the computer running incase of problems.
 

1 more replies
Answer Match 56.7%

I bought a presario 1500 that I had assumed had a problem with green lines that were on the lcd and external monitor. The lady who owned it had taken it apart and sold it to me that way. I bought it today and tested it when I got home. I powered it on and I saw that the fan will move slightly but won't start and the hard drive will start but shuts down after about 5-10 seconds. The power light always stays on but nothing else. I noticed when I unplug the hard drive and battery inverter board(see link) it will shut off the power light. Could that be the problem? I don't see how the motherboard could break when it was never used. Anyone have some advise?

http://cgi.ebay.com/COMPAQ-PRESARIO...ameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting
 

A:Compaq presario won't turn on

This looks like a power supply controller card issue. Also some systems will not run if the CPU fan is not working. You need the battery inverter board in place to power the system and light the light.
 

23 more replies
Answer Match 56.7%

Hello:
I'm making some changes to a compaq presario 4660 (dinosaur) and it's running windows 98. I cannot get into bios. F2, F1, delete and Tab do not get me in. I searched on google and really didn't receive good results. Well it did say that F2 would get me in, but it does not. Seemed to me there was another way to get into bios?
 

A:compaq presario 4660

16 more replies
Answer Match 56.7%

Hey everyone I am having the same problem again as I was having before with my Compaq Presario 5000. It seems to just freeze up when I am on it or not. Sometimes I try to move the mouse to get back into Windows from the screen saver and it does nothing. At all! And sometimes in the middle of surfing the web and listening to music it just freezes up again and I have to hit the power button just to get it back up and running. Can anyone help out with this? I was asked to run MemTest before but I have no idea how to do this, so could someone help out? Also, since I am not a complete newbie, but darn close when it comes to the whole hardware side of computing, how can I tell what is causing interference with what when it comes to the hardware I am running and wether or not the latest drivers are installed? Thanks again and hope to get this resolved quickly.

Compaq Presario 5000
UWAVE Motherboard
832MB RAM
AMD Athlon 901Mhz
eVga GeForce2 mx 400 64MB PCI
Sound Blaster Audigy 2 ZS Platinum
Sony DRU-530 DVD +-Drive
Windows XP Home SP1
 

A:Compaq Presario Freezing up again!

13 more replies
Answer Match 56.7%

My laptop wants an administrator password that I don't know. Shows a system disabled code of 91550023. What do I do?

More replies
Answer Match 56.7%

I have an old compa presario 1277 who supposedly had something called a monkey virus on it. This virus supposedly wipped out all the drivers. Someone reistalled them. However, my husband insist the monitor display does not look like it did and that it use to play movies. Do you have any suggestions?
 

A:Compaq Presario 1277

Is it this Presario 1277 notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=95012& ?

If so try reinstalling the Trident Display Driver from the available downloads.
 

1 more replies
Answer Match 56.7%

hello recently my pc has been failing to start up and asking to go to the start up repair my pc is fine but will this lead to future problems

thanks ~shadow

A:compaq presario cq60 help

Hi and Welcome to TSF!

What did startup repair find?

Do you have your Windows cd?

2 more replies
Answer Match 56.7%

Right heres a very specific enquiry...

I have a Compaq Presario SR2125UK

Im looking to upgrade the graphics to a BFG 8800 GTS OC 320MB or the 640mb.

First question is can my processor handle it? (Intel Pentium D 915)

I know i have to upgrade the ram so im purchasing 4GB of DDR2 RAM for about £50 and im replacing the PSU probably with an OCZ Stealth 600W PSU. Do that sound viable? Ive only got 32bit windows so i know im loosing out on some ram but its a package deal lol.

I have tried reading into all the requirements for these upgrades such as power connectors from PSU to graphics card and motherboard and think i got a bit lost.

The BFG requires 12v of something which the OCZ provides along with more than enough power (425w required for BFG), plus both the motherboard and the PSU are PCI express compatible. And i have an extra slot to accommodate the doubledecked size of the BFG.

In terms of the required power connectors i was a bit lost. The OCZ said it has a 6/8 PCI express pin which is what the BFG requires but can somebody shed some light on this?

But im really just concerned that it was going to fit and work!

These purchases come to around about £150 so dont want to be thinking for another 100 squid i could have just bought a XBox 360! lol

Basically Im asking advise on the above upgrade decisions and any tips anyone has on installing these?

Any help would be appreciated, im sick of only being able to run pre-2005 games on a pc bought in 2007! I was pretty suc... Read more

A:Upgrading my Compaq Presario

16 more replies
Answer Match 56.7%

All of a sudden, my Compaq Presario, Windows XP, won't boot up past the black "COMPAQ" screen. None of the keyboard keys respond (we've tried three different keyboards). All the lights light up when we first turn on the computer, but then it just stops at the black screen with boot options, but none of the keys on the keyboard will do anything. Does anyone know what the problem might be?

A:Booting Up Compaq Presario

Have you tried booting into "Safe Mode" to see if its a software/driver issue?

4 more replies
Answer Match 56.7%

My brother recently bought a new HP desktop PC so he wants to sell his old laptop (Compaq Presario 700, Windows XP Home Edition) and we both agreed we should do a full restore to completely wipe the hard drive clean to it's original slate and we have the original Compaq ''QuickRestore'' discs and for whatever reason, they're not working. There is three CD's and not a single scratch or mark on any of them. I've tried to run all three on the laptop and the only thing that happens is that the folder containing the discs files on it is what pops up and no actual setup occurs like it says on the little piece of paper that comes with the CD's.

This is what it says....

First, if your Presario Notebook is attached to a Port Replicator (QuikDock), you must turn the power to the computer off, disconnect it from the QuikDock, and plug it into an external power socket. Disconnect any printer cables or other peripherals from the computer before using Quick Restore.
1. Insert the Quick Restore CD (bootable disk) in the CD drive, and press Enter. A WARNING message appears advising that you are attempting to totally reformat your hard drive. Confirm by following the next step.
2. Press 1 and then Enter to continue. The Power Quest Quick Restore Wizard starts copying and uncompressing data to the local hard drive. This process takes approximately 7-10 minutes.

This warning message never appears and none of this ever happens. Does anyone know why... Read more

A:Compaq Presario 700 (Windows XP)

Is there an autorun.exe? Setup.exe? Any executable at all on the root of the disk?
 

1 more replies
Answer Match 56.7%

Hello Sir,
         My Name is Baldeep Singh, i have a problem with my Hp Compaq Presario C700. When i power on the laptop its display is dosen't respond anything but the laptop is running ok because all the led panels are blue and the HDD led also blinks. I tryed my level best but its of no use. i read all the instructions in internet and did as the same but of no use. Came you help me.

A:Compaq Presario C700

Have you tried using an external monitor to see if the problem is with the display?

4 more replies
Answer Match 56.7%

Had to default my laptop now when it starts to load windows
says starting windows setup is preparing computor for first use
welcome message comes up then says windows could not complete installation,.to complete restart the installation
i press ok and goes over again starting windows
 

A:Compaq presario co61

What's the part/product number(P/N) on that Compaq Presario laptop?

You appear to have a CQ61 series model, so we need to confirm which one you have.
There should be a dash and additional characters after CQ61.

--------------------------------------------------------
 

2 more replies
Answer Match 56.7%

Here we go again, guess I am good at getting stuck on stupid, we bought five of these HP 'debranded' machines. I have a M2NBP-VM CSM mobo. I have almost everything working except the audio. Two errors in device manager PCI device and unknown device. I am suspecting that it has to do with audio since I can't get any audio going period. Yepper done the aau high def audio driver thing, chatted with HP support etc etc ran driver issues into the ground. I am using xp pro sp3, I know these things shipped with MCE and they say there vista ready.....hmmm but no xp drivers. So any of ya'all got some advice? thanx
 

More replies
Answer Match 56.7%

I just bought and set up a new computer system, and am now trying to get my old one to boot, so that I can migrate the files needed for the new system. The monitor doesn't come on, and all I'm getting is a fast blinking green light on the tower. I've un/replugged all cables and power cords, and I know the monitor is OK because it belongs to my husband's matching computer, but my old one won't boot.

Help!!!
 

A:Compaq Presario won't boot!

I'm desperate, guys! Is there any other information I can give you to help resolve my problem? I have the Easy Transfer Cable for Vista all ready to go (and the software loaded in the old computer before I disconnected it and moved it to the card table), but I can't get my Compaq to boot.

If you can't help me, I guess I'll take it to Best Buy tomorrow and let the Geek Squad have at it...
 

3 more replies