Tech Problem Aggregator

computer freezes can sombeody read a mini dump?

Q: computer freezes can sombeody read a mini dump?

recently my harddrive died and replaced, reinstalled operating system and since then it just freezes, can anybody help me? Is this just a dying computer and has no life left in it? Never had any issues with Vista until this summer.

thank you in advance

A: computer freezes can sombeody read a mini dump?

16 more replies
Answer Match 86.94%

P.S sorry for posting again mods, I cannot find the delete thread button and cannot find the edit button. I'm reposing because I forgot to add the mini dump file.

[SOLVED] Computer Freezes,hangs than restarts problem
Computer Specs
-windows 7 ultimate 64 bit service pack 1
-1200 watt 80+ corsair power supply
-16gb ram 1600mhz
-intel core i7 975 extreme edition 8mb
-nvidia special edition case
-sapphire 6990 4gb graphic card
-120gb ssd,1tb hd,1.5tb hd
-3 200mm fans, 1 230mm fans and 3 smaller fans
-just did a reformat a couple of days ago
-age of system all parts within one year or less

So here is my problem. For some reason my system would always freeze say about 3-5 times a day. It would hang, than program after program would freeze and even alt+contr+del will freeze shortly afterwards also.

Sometimes it restarts by itself and sometimes I have to restart it manually. So not only am I having these freezing problems but when the system starts it won't load the operating system so I have to put in the window disk and run repair.

It gets more confusing because the part of the screen that says (operating system not listed, click load drivers and than install drivers for hard disk) my hard disk does not show at this screen. I've tried bootrec and everything and nothing seems to work. If I shut down my system via the power button so basically a hard reboot and turn on the power the problem is solved.

Does anyone find it weird that when m... Read more

A:[SOLVED] Computer freezes and restarts mini dump file attached

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.

FYI: I am having eye surgery on Wednesday, October 19, 2011.
I expect to be back online (barring any complications) within 2 days.
If I'm not back online by then, please PM another staff member for further assistance.

Not a problem, there's no delete thread button available to users - and the edit button goes away after 15-20 minutes.
I'm having a better day with my eyes today, so I'm going to give your topic a try. Sorry for the delay. I'm the one who suggested a new topic, so that your situation would be more visible to those of us helping out here. Previous post located here: [SOLVED] Window 7 Freezes, Crashes, and Reboot Problem?

My first impression is that this is either an SSD problem, or a compatibility problem between the system and the SSD (and these problems are common enough that I won't install an SSD in my system until I see these problems going away). I think this because of the system not finding the SSD when you reboot. A good test for this is to try to boot from a SATA or IDE hard drive and see if the problem goes away. Make sure that the SSD is fully disconnected if you try this.

Install the latest firmware for your SSD. I have heard of one user fixing their problems by performing a Secure Erase of the SSD - you may also want to try that.

Driver Verifier (detailed at bottom of user's post) shows a STOP 0xD5 in pt... Read more

3 more replies
Answer Match 81.48%

Can someone give me an idea whats going on here. Random Reboots have increased quite a bit of late.

Sometimes its when it has been in sleep mode. Other times normal locked desktop.

A:Mini dump to read please?

Are you sure it's random reboots?
Not an update that reboots your computer - as a window behind a window you're working on?
What happens when it reboots exactly?

5 more replies
Answer Match 81.48%

I'm getting a lot of Blue Screen errors on my server. It is throwing off Mini-dumps. However, I have no idea how to read them. Is there a program dedicated doing this?This is a challenge posting by CNChallenger.

A:How to Read a Mini-Dump

google is really easy to use. I just typed in your question.http://support.microsoft.com/kb/315263Consider instead of reading the minidump that you review your event viewer logs and you capture the exact blue screen error then look it up via google.You would also start with basics like making sure the mainboard/cpu is clear of dust and all the fans are working correctly [just because they spin doesn't me they are at the right rpms]Then you would do your maintenance like running chkdsk /r, disk cleanup and defragRun your antispyware and antivirus after you have updated them.

2 more replies
Answer Match 78.54%

Hi, I was trying to figure out what caused the Stop error I last encountered. I tried searching for any clues on Windows XP's mini dump, but I can't seem to find it. All I see are drivers loaded at that time, but the actual file I'm searching for, the file that caused the crash as indicated on the Stop error, is not there. It's actually Speedbit's Video Accelerator file, sbbotdi.sys. I have to find that out the hard way - waiting for the PC to trigger the stop error again. I saw people here asking for the minidump and replying with the exact file that caused the error. Thanks a lot

A:[SOLVED] How to read WinXP's Mini dump files

hello

just a suggestion if you haven't tried it yet but go to the home site of the company and inquire of them of the file and any related problems that might cause this

you might get the info you are lookin for there and reasons as why it is causing the error

for this sounds like it is an application error that is related to the program and not an issue of windows

i may be wrong !!!!

but the makers of the program should be able to answer your questions , if not check back you may find that you may have other advice waiting here

Mike

6 more replies
Answer Match 66.78%

My computer restarts once every 3 to 5 days. Often in the middle of movie or youtube video or reading pdf file.
I have done Memtest86 ram test 4 passes. OCCT psu test 3 hours pass. Don't know what else to do. I have followed the instruction and here is the files. Please help.

A:Computer restart while watching youtube, movie, pdf. No mini dump file

Hello and welcome to Sevenforums!
How-To set so Windows create a dump:

1. Go to the Control Panel, choose 'System And Security', and then click 'System', and then click the 'Advanced System Settings' link.

2. In the opened window, click the 'Advanced' tab and then inside the 'Startup And Recovery' frame, click the 'Settings' button.

3. In the opened 'Startup And Recovery' window, there is 'Write Debugging Information' section. You should set the combo-box in this section to 'Small memory dump', and then click 'ok' to confirm the change.

You can also make this MiniDump change in the Registry, by setting the following value:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl]
"CrashDumpEnabled"=dword:00000003
However, be aware that this Registry change affects the system only after reboot.
Cheers,
Laith

1 more replies
Answer Match 63%

I had my Laptop for almost a year now. It ran perfect for the first 6 months but lately it has been freezing every 5-20 seconds depending on the program I am using. The freezes will last for 2-10 seconds and it starts to get really annoying. For some reason, it happens most when Im using Microsoft word. It does it a lot when Im playing games or watching online or offline videos. I have scanned my computer for viruses and nothing came up and Im constantly cleaning it out with ccleaner or regcure. My hard drive is about a third of the way full. When I boot up task manager it says Im using about 3-10 percent computer usage and 3GB of RAM. I have no idea why it is doing this or what I can do to fix it. If anyone knows whats wrong or how to fix it, I would be most appreciative! Thanks in advance. Heres a list of my laptops specs.

Acer Aspire
Intel Core i7 Quad-Core
2GHz Boost up to 2.9GHz
AMD Radeon HD 6650M
6 GB of RAM
640GB Hard Drive space
 

A:My computer has several mini-freezes!

Hi and welcome to TGS.
Download Speccy from HERE, Install and run it then go to
File\Save Snapshot and upload the results here.
To upload you should click on and then click on "Manage Attachment" and upload the Speccy Snapshot file.
The file contains your CPU and Motherboard temperature .
All programs installed,running.All services,etc.
It gives us a clear view of your computer.
You can take a look on this file before uploading here with a simple Double-Click on it.

 

1 more replies
Answer Match 60.06%

About a year ago my PC started locking up randomly and after some troubleshooting im still having the same problem and have no idea what to try next. When my PC freezes the monitor is just stuck on the "last frame/image" and any audio that was playing is instantly cut off. When I try to push caps lock during the hang, the light on my keyboard doesn't change. The HDD light on my tower will either stay on or off depending on its state when the hang occurred and the light on my USB network card will continue to flash as if it is still sending/receiving data. I never get a BSOD so I have to hold down the power button to manually reboot the PC. The hangs can happen anywhere from 5 times a day to once a week. After rebooting the PC I always have the same 3 events in event viewer(6008, 41, 1101), which are all logged at the time the PC reboots. Event 1101 says "Audit events have been dropped by the transport. 0"Event 41 says "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."Event 6008 says "The previous system shutdown at 4:33:58 PM on ‎7/‎16/‎2015 was unexpected."The strange thing about event 6008 is that the time stamp for when my computer "shutdown" is always around 20 minutes before my computer actually froze. For example in the above Event Log it says my computer shutdown at 4:33:58 PM, but my PC didn't actually freeze until 4:50 PM.The troublesho... Read more

A:Computer completely freezes randomly. No BSOD or Dump files.

Hello there, sir.
 
Is your CPU overclocked?
 

9 more replies
Answer Match 60.06%

Hello.

My computer freezes/hangs at about 3-4 times per month. After that I have to hold the power button, turn it off and turn it on back again. Event logs say KERNEL POWER EVENT ID 41.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
No dump files are created.

So I would like to fix that annoying issue for good. I have been trying to let it go but I can't stand it anymore.

Would it be software or hardware related? Can we pin point the issue? I don't mind buying knew parts, just need to get this done.

Windows 8.1 Pro
Mobo: P8Z77-M
Crucial M500 SSD 256GB
AMD 7970 vapor-x
2x 8GB corsair vengeance RAM
i7 3700k

The processor is OCed a bit, so is the GPU. Those hangs are way too random though and I have stress-tested for stability. Problems occur even when pc is running cool and with no intensive apps. I've reinstalled windows once a good while back but the problem continued.
I do have a feeling that it has to do with SLEEPING. Might be a coincidence but the pc seems to run fine if I keep turning it off and on instead of just sleeping. Could it be that something is being written in a wrong way everytime it sleeps?

Logs are attached.

More replies
Answer Match 60.06%

Hello.

My computer freezes/hangs at about 3-4 times per month. After that I have to hold the power button, turn it off and turn it on back again. Event logs say KERNEL POWER EVENT ID 41.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
No dump files are created.

So I would like to fix that annoying issue for good. I have been trying to let it go but I can't stand it anymore.

Would it be software or hardware related? Can we pin point the issue? I don't mind buying knew parts, just need to get this done.

Windows 8.1 Pro
Mobo: P8Z77-M
Crucial M500 SSD 256GB
AMD 7970 vapor-x
2x 8GB corsair vengeance RAM
i7 3700k

The processor is OCed a bit, so is the GPU. Those hangs are way too random though and I have stress-tested for stability. Problems occur even when pc is running cool and with no intensive apps. I've reinstalled windows once a good while back but the problem continued.
I do have a feeling that it has to do with SLEEPING. Might be a coincidence but the pc seems to run fine if I keep turning it off and on instead of just sleeping. Could it be that something is being written in a wrong way everytime it sleeps?

Logs are attached.

A:Computer freezes/hangs. No dump files. Power Kernel ID 41.

I'm not sure if I should bump this? 5 days, should I still be expecting some kind of assistance?

1 more replies
Answer Match 60.06%

Hello.

My computer freezes/hangs at about 3-4 times per month. After that I have to hold the power button, turn it off and turn it on back again. Event logs say KERNEL POWER EVENT ID 41.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
No dump files are created.

So I would like to fix that annoying issue for good. I have been trying to let it go but I can't stand it anymore.

Would it be software or hardware related? Can we pin point the issue? I don't mind buying knew parts, just need to get this done.

Windows 8.1 Pro
Mobo: P8Z77-M
Crucial M500 SSD 256GB
AMD 7970 vapor-x
2x 8GB corsair vengeance RAM
i7 3700k

The processor is OCed a bit, so is the GPU. Those hangs are way too random though and I have stress-tested for stability. Problems occur even when pc is running cool and with no intensive apps. I've reinstalled windows once a good while back but the problem continued.
I do have a feeling that it has to do with SLEEPING. Might be a coincidence but the pc seems to run fine if I keep turning it off and on instead of just sleeping. Could it be that something is being written in a wrong way everytime it sleeps?

Logs are attached.

A:Computer freezes/hangs. No dump files. Power Kernel ID 41.

I'm not sure if I should bump this? 5 days, should I still be expecting some kind of assistance?

5 more replies
Answer Match 58.38%

I've been having never ending problems with my PC, I changed from Vista x64 to X86 as I had a scanner with no 64bit drivers and since then I have had problem after problem. Basically having BSOD ALL the time , I had none at all on x64 but have had a bizillion on the 32bit Vista.

It was a fresh install and after a few weeks I did another fresh install and it BSOD on it's first boot.

I wondered if it may of not been getting enough power (as I have a 8600GTS card in here and numerous other bits and bobs) so I forked out a heap for a good quality PSU. Still got BSODs, I tested the RAM and it got a couple of errors and I soon discovered that my motherboard wasn't capable of providing enough voltage to the chips, so I bought some brand new 1.8v DD2 ram and I'm still having crashes. I had 5 or 6 of these crashes today and I'm at the end of my tether.

this is the case/mobo I have
ASUS T3-M2NC51PV

and here is a zip file FULL of freaking minidumps
evilboris.com/Whole_load_of_dumps.zip

If anybody can manage to help me fix this I will be over the moon, this PC has cost me a fortune so far (it was only meant to be a simple upgrade!) CURSE YOU PC!
 

A:Could someone take a look at my [mini]dump(s)? :D

Ok Evil,
You have the most minidumps posted in one thread than I have seen. Thanks

You have a sick system for sure. You have a piece of hardware or a driver... or 2 that Vista doesn't like... I see a corrupted sector or 2 on the hard drive, memory errors and Nvidia problems. There's even mention of network connectivity trouble. Hardware to motherboard incompatibility. Where to begin??

You have done a fresh install. Problems with memory can mimmick all these symptoms. How much RAM are you running? What brand?
 

14 more replies
Answer Match 58.38%

Hi, i have windows 7 installed on my net book, i am experiencing problems with blue screen errors often when playing videos, i have uploaded my mini dump files to rapid share

- RapidShare: 1-CLICK Web hosting - Easy Filehosting

the most recent ble screen relates to
013110-16926-01.dmp

could please analyze them and suggest a solution

thanks

A:Mini dump - need help

You have a wide variety of error codes in the dumps which is often a sign of hardware problems i would start with running some basic hardware tests,
Memory Diagnostics to check ram
HD Diagnostic to check HDD
System file check, Start>cmd.exe>right click run as admin>type sfc /scannow

Post back your results, if all tests come out ok then we can move on to other things

Hope this helps

6 more replies
Answer Match 58.38%

I have been experiencing rare BSOD's whenever exiting sleep mode and I've attempted to rar/zip my mini dump files but it won't let me (I don't have permission). I've moved them to the desktop and no success (nor in their original file). Why am I having trouble with something when I can't seem to find any other information on this?

A:Help with Mini dump

I feel very foolish as I just figured it out... any admin can delete this thread.

1 more replies
Answer Match 58.38%

Found this forum after looking for some help with my BSOD crashes.

Seems to happen fairly randomly, looking at most peoples problems it might be memory but I have run the memtest without any problems.

Attached is the latest dump file, if anyone can point me in the right direction, I'd appreciate it.

Thanks, J
 

A:Mini dump help, please!

The crashes are caused by sthda.sys. This is a driver for a SigmaTel audio card. If that is the audio card that you use uninstall the drivers and download and install the lates drivers from the manufacturer's website.
 

3 more replies
Answer Match 58.38%

Well seems like some more mini-dump problems, but so far there in weeks, not minutes. Could anyone tell me the problem with these two mini-dumps.
 

A:Seems like another mini-dump

Bump Bump Bump Bump
 

2 more replies
Answer Match 58.38%

Please help with the mini dump?
 

A:Please help with mini dump

Inside the 1 MiniDump:




BugCheck 1000008E, {c0000005, 805bb452, a23319f0, 0}
*** ERROR: Module load completed but symbols could not be loaded for dwall.sys
Probably caused by : eamon.sysClick to expand...

eamon.sys: Eset NOD32 anti-virus
dwall.sys: Defensewall

Please uninstall Defensewall

Also remove this file:
dwall.sys from your system (uninstall should do this)
And the registry entry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\dwall (uninstall should do this)
 

2 more replies
Answer Match 58.38%

Ok not sure I know what am looking at when I view my debug text file. I followed the instructions and created a debug log file. Can someone help me look at it? The machine has been doing these quite often and I am not sure how to read the dump information.

I would like to know what it is telling me and how I can learn to read them next time.

Thanks in advance for your help.

Suthngin
 

A:Mini Dump Help...

Updated Post

Ok so I have done the "Before you Post Stuff" No other issues. Here are 5-6 Mini Dumps as requested. I thought I was helping by running the log files myself. Please help this thing reboots alot!!!

Suthngin
 

1 more replies
Answer Match 58.38%

Every one in a while my cimputer will crash. It either happens when I play games or listen to music. It happens about once every week. Here's the error message that I just got when XP restarted.

C:\WINDOWS\Minidump\Mini122502-01.dmp
C:\DOCUME~1\BRIANT~1\LOCALS~1\Temp\WER1.tmp.dir00\sysdata.xml
 

A:mini dump?

7 more replies
Answer Match 58.38%

Hi

I've followed the instructions given under 'How to recieve help diagnosing blue screen...' but when i try to open the mini dump file in the windbg I get a message saying I don't have permission to open the file... What do I do?

A:Mini dump!

hi,,, are you logged in on the admin account ??here is i link you also might find usefulhttp://www.maximumpc.com/article/features/..._survival_guidegood luck.

1 more replies
Answer Match 58.38%

can you help me with my computer problems?
 

A:Mini dump Help

16 more replies
Answer Match 57.54%

Hello Guys
i have located the minidump in windows 7 but i am unable to read it .please help how to read or some translate it for me or tell me any tool that allows to see whats written in the .Event manager giving this

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000116 (0xfffffa80095f94e0, 0xfffff8800ff29230, 0x0000000000000000, 0x0000000000000002). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 122009-17578-01.
 

A:Mini dump windows 7

Please update all your manufacturer drivers: http://www.techspot.com/vb/topic117607.html
 

12 more replies
Answer Match 57.54%

HI all new to your forums and saw that you guys help newbies like me!!
I got a BSOD and had **** stop code
also when i got to even viewer it says that my hard driver cable may be damaged sometimes my storage hard drive doens't show up when i boot up..
stop 0.0000000A (0x901e075c, 0x00000002, 0x00000000, 0x80522E06
Mini dump is this
Microsoft (R) Windows Debugger Version 6.6.0007.5
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Documents and Settings\Gregory Tam\Desktop\Mini092107-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image \WINDOWS\system32\ntkrnlpa.exe, Win32 e... Read more

A:BSOD - mini dump help

Well it's a file system driver that is crashing. Can't tell much from it except that it may well be a problem with your storage media.

You need to isolate the pattern under which the error occurs.

IF it is an external drive -- try removing it. If it is an internal drive, run chkdsk on it and if necessary reseat the cables.

If the pattern is completely random, you might want to look at faulty ram as a possible culprit:

Beginners Guides: Diagnosing Bad Memory
Memtest86 - A Stand-alone Memory Diagnostic
 

2 more replies
Answer Match 57.54%

A customer of my company had a Dell Optiplex 760 installed about 2 months ago and have had 5 BSOD over the past two months. There is not usually someone at the PC all the time so it's hard to say if they are doing anything that is contributing to the problem. Here is the PC info

Dell Optiplex 760
Intel Dual Core E5200 @ 2.5 GHz
2GB RAM
Windows XP Pro SP3

I have attached all the minidump files. From what I can tell a file named nhcimonoL.sys appears in 3 of them but I have not had anyluck finding out what that file is related to. Please help

Thank You

More replies
Answer Match 57.54%

Hi,
I'm trying to fix a computer with a habit of a Blue Screen Crash every few days.
If someone could please have a look at the mini dump and let me know what they see i would appreciate it.
I think it is a heat issue by the amount of dust in the fans however i figured it wouldn't hurt to get you to have a look.

Thanks for your help
Andrew
 

A:Solved: Win Xp MINI DUMP

8 more replies
Answer Match 57.54%

Hello again, i have another problem on top of the 0x00000124 problem!

When It crashes to the BSOD it doesnt make a mini dump even though I set it to create one when it crashes!

PLZ HELP ME!

A:Mini dump not created!

Originally Posted by Gamemaster2237


Hello again, i have another problem on top of the 0x00000124 problem!

When It crashes to the BSOD it doesnt make a mini dump even though I set it to create one when it crashes!

PLZ HELP ME!



Missing mini dumps mostly is caused by wrong setting of pagefile.sys -not enough or placed on non-system partition
Here you have small tool - dump configurator which help you diagnose & fix this probem
Windows Platforms Tools

more replies
Answer Match 57.54%

I am getting repeated bad_pool_caller blue screens occurring when my Win8 desktop comes out of sleep

*** STOP: 0x000000c2 (0x0000000000000007, 0x00000000000011c1, 0x0000000004440010,
0xfffffa8005969110)

*** ntoskrnl.exe - Address 0xfffff8017666b240 base at 0xfffff80176611000 DateStamp
0x513814ba

Caused by ntoskrnl.exe+5a2s40

I have atttached the dump files from the last two bsod's

Any help greatly appreciated

Eric
 

A:Solved: help with a mini-dump

16 more replies
Answer Match 57.54%

I once again keep getting what i guess is a BSOD but their are no words its just literally a blue screen. It can't be my RAM anymore cause i just got my new RAM mailed to me yesterday and i put the 2gigs in my comp.

I attached the two files from my minidump if anyone could tell me what could be causing the problem now.. And how i can fix it would be greatly appreciated.

Thanks
 

A:Mini Dump Files

It couldn't be anything to do with my usb ports could it?
 

4 more replies
Answer Match 57.54%

After purchasing a new case, PSU, and putting
it all back together after a power surge, I'm afraid
that the Motherboard is shot. No bulging capacitors
but one of the 4 memory sticks didn't pass on MemTest.

Need some advice...
? OS - Windows 7 Ultimate
? x64
? What was original installed OS on system? Vista Ult. x64
? full retail version
? Age of system (hardware) 1 mos-3 years
? Age of OS installation - have you re-installed the OS? 1 week

? CPU AMD Athlon 64 X2 Dual Core 4400+ 2.30 GHz
? Video Card: NVIDIA GeForce 9800 GT
? MotherBoard: Foxconn ACPI x64-based
? Power Supply - 650W (Brand new)

? System Manufacturer None
? Exact model number (if laptop, check label on bottom)

A:BSOD Mini-Dump

Hello,

If only one of the sticks is failing Memtest86, the stick itself is the most likely cause. Try testing one of the sticks that passed in the slot of the stick that failed.

...Summary of the dumps:

Code:

Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Mon Apr 4 09:06:41.333 2011 (UTC - 4:00)
System Uptime: 0 days 10:23:00.190
Probably caused by : ataport.SYS ( ataport!PortListInsertRequest+b0 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xD1_ataport!PortListInsertRequest+b0
SystemProductName = RS690M2MA
??????????????????????????????????????????????????????????????????????????????????????``
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun Apr 3 19:18:30.240 2011 (UTC - 4:00)
System Uptime: 0 days 0:01:44.190
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun Apr 3 13:17:09.323 2011 (UTC - 4:00)
System Uptime: 0 days 0:59:19.185
Probably caused by : wininit.exe
PROCESS_NAME: wininit.ex... Read more

1 more replies
Answer Match 57.54%

I am new to these Forums especially with regard to bluescreening on my Acer Laptop running Vista....
I am experiencing alot of problems with my ACER ASPIRE laptop 5112WLMi AMD Turion 64 160gb 5400 rpm SATA HDD DDR2
I am running VISTA

It has been bluescreening for some time and then it works well and bluescreens again. There is also a flickering of the screen with horizontal lines through it when it boots up.This subsides after awhile.The machine seems to be running ok but it will be just a question of time when it crashes again.It is very unpredictable. Two days ago it did it twice.
Here is Problem event description;
First time>>>> OS version 6.0 6000.2.0.0768.3
Locale ID; 4105
Files: Mini 06 1910-01.dmp
sysdata.xml
version. txt
BCCODE: a
BCP1: 00020005
BCP2: 000000 1B
BCP3: 000000 1
BCP4: 81 CBB165
OS Version 6_0_6000
Service Pack 0_0
Product 768_1
Server Info: e8185a50-25f5-48c4-a30e-f58b7564d8b4

Second time: Problem event:Blue screening
OS Version; 6.0 6000.2.0.0768.3
Locale ID;4105
BCCODE f4
BCP1: 00000003
BCP2: 85FDA800
BCP3: 85FDA94C
BCP4: 81EAA730
OS Version 6_0_6000
Service Pack 0_0
Product 768_1

Files that help describe the Problem;
1) C:\Windows\MiniDump\Mini 06190-02.dmp
2) C:\USERS\ACER\APPData\Local\Temp\WER 85171-O.Sysdata.xml
3) C:\USERS\ACER\APPData\Local\Temp\WER B929.tmp.version.txt
So these are problem event descriptions.I was also trying to backup files on this ACER to my external HD,w... Read more

A:Bluescreening and Mini Dump

If you would just follow these instructions you will be helped.

Dump files - Upload to Seven Forums - Windows 7 Forums

4 more replies
Answer Match 57.54%

The detected result of WinXP Manager - System Information 1.1 (Hardware)

Motherboard: AWRDACPI

Basic Input Output Systme(BIOS): Phoenix - AwardBIOS v6.00PG

Central Processing Unit(CPU): AMD Athlon(tm) XP

Physical Memory X 2

512MB

512MB

Hard Disk X 2

ST3120026A (112GB)

ST380013A (75GB)

Video Card X 2

RADEON 9600 SERIES

RADEON 9600 SERIES - Secondary

Monitor X 2

Dell E551c

Default Monitor

Audio Device: NVIDIA(R) nForce(TM) Audio

Network Adapter

1394 Connection - 1394 Net Adapter (Connected)

Local Area Connection - NVIDIA nForce Networking Controller (Connected)

Keyboard: Standard 101/102-Key or Microsoft Natural PS/2 Keyboard

Mouse: PS/2 Compatible Mouse

--------------------------------------------------------------------------------------------------------

kernal dump: http://www.zshare.net/download/17491477f01ef099/

minidump: http://www.zshare.net/download/1749452433744213/

--------------------------------------------------------------------------------------------------------
 

A:Kernal/Mini Dump Help

Your error seems to be a Hardware fault since the first parameter in the 0x7F error is "d".

Start off by running Memtest86.

Memtest86 Instructions
Download the pre-built version of Memtest86 (Link Below) and burn it onto a CD using ISO Recorder (Link Below) other ISO burning software will work as well (E.g. Nero). After this boot off the CD and start the test going and let it run for 3-5 hours (Minimum of 7 Passes) or Overnight which is best.

Memtest86 - http://www.memtest.org/
ISO Recorder - http://isorecorder.alexfeinman.com/isorecorder.htm
 

1 more replies
Answer Match 57.54%

My system crashes about 2 minutes after booting for no apparent reason. Even with no apps running it, idle at desktop, it just blue screens and crashes. Just installed ServicePack 1 yesterday and today after a final windows update it started crashing.

Specs-
OS: Windows 7 Home Premium 64bit
Board: Asrock z77 Extreme 4
CPU: i5 3570k
Video: Evga gtx 670
Memory: Corsair Vengeance 8gb (2 x 4gb)

Error Log:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
LocaleID: 1033

Additional information about the problem:
BCCode: 1a
BCP1: 0000000000041287
BCP2: 000000004B000006
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows/Minidump\060613-25755-01.dmp
C:\Users\Shane\AppData\Local\Temp\WER-49358-0.sysdata.xml

A:Mini Dump After Booting

Please follow the Blue Screen of Death (BSOD) Posting Instructions

2 more replies
Answer Match 57.54%

Does anything below mean anything thing to anyone? I used the nirsoft link and I just copied and pasted the info here:
061813-19609-01.dmp 6/18/2013 9:51:10 PM 0x00000116 fffffa80`06638010 fffff880`049ce010 ffffffff`c00000b5 00000000`0000000a dxgkrnl.sys dxgkrnl.sys+5d054 DirectX Graphics Kernel Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.18126 (win7sp1_gdr.130409-1534) x64 ntoskrnl.exe+75c00 C:\Windows\Minidump\061813-19609-01.dmp 8 15 7601 304,048 6/18/2013 9:52:46 PM

dxgkrnl.sys dxgkrnl.sys+5d054 fffff880`03e32000 fffff880`03f26000 0x000f4000 0x5164dc49 4/9/2013 10:28:09 PM Microsoft® Windows® Operating System DirectX Graphics Kernel 6.1.7601.18126 (win7sp1_gdr.130409-1534) Microsoft Corporation C:\Windows\system32\drivers\dxgkrnl.sys
dxgmms1.sys dxgmms1.sys+ff13 fffff880`03f26000 fffff880`03f6c000 0x00046000 0x5164dc13 4/9/2013 10:27:15 PM Microsoft® Windows® Operating System DirectX Graphics MMS 6.1.7601.18126 (win7sp1_gdr.130409-1534) Microsoft Corporation C:\Windows\system32\drivers\dxgmms1.sys
nvlddmkm.sys nvlddmkm.sys+13b010 fffff880`04893000 fffff880`05374000 0x00ae1000 0x518fe8f9 5/12/2013 2:09:45 PM NVIDIA Windows Kernel Mode Driver, Version 320.49 NVIDIA Windows Kernel Mode Driver, Version 320.49 9.18.13.2049 NVIDIA Corporation C:\Windows\system32\drivers\nvlddmkm.sys
ntoskrnl.exe fffff800`02e67000 fffff800`0344d000 0x005e6000 0x5147d9c6 3/18/2013 10:21:42 PM Microsoft® Windows® Operating System NT Kernel & System 6.1.7601.1... Read more

More replies
Answer Match 57.54%

I just uninstalled sygate firewall the new symantic updates are slowing down internet connect
installed outpost 3
was on the internet watching nbc
and was encoding a movie to another machine via network
got the dreaded bsod mini dmp txt as follows

Code:
Loading Dump File
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: C:\WINDOWS\Symbols
Executable search path is:
Unable to load image ntoskrnl.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 2) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805644a0
Debug session time: Wed Dec 28 02:21:08.187 2005 (GMT-5)
System Uptime: 0 days 1:18:35.151
Unable to load image ntoskrnl.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Loading Kernel Symbols
......................................................................................................................................
Loading unloaded module list
.............
Loading User Symbols
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************... Read more

A:mini dump can someone help me decypher

Your network card driver crashed while trying to read a memory block while another process was writing to it.

Looks like a bug in the driver itself.
 

2 more replies
Answer Match 57.54%

Hello to everybody,

I'm need some help for reading the mini dump files from my BSΟDs.
This is a new PC with a fresh installation and I keep on having several crashes...

First I though it was nVidia drivers the problem (I uninstalled and reinstall them after cleaning the registry).
My second though goes to SP3 from Microsoft but without proof (I install the SP3 right after the fresh installation of the winXP).
And my last one goes to the AHCI Controller for the SATAs

I tried to identify the problem but I can't debug the mini dump files.
I tried the debug tool from microsoft but it always ask for resources (Symbols, Images, etc) and I start to explode...

I attach the mini dump files (delete the txt extension, I don't know ho to attach them without compressing them, I just rename them)

My configuration is ASUS Crosshair Formula II, AMD x2 6000+, 4*1Gb TwinMos Twister 800, XFX 8800GT XXX 512Mb, Creative Fatal1ty Gamer Pro, 520W Coolermaster Real Power.

A:Help reading the mini dump

Here some errors:

IO SYSΤΕΜ VERIFICATION ERROR in wmiacpi.sys (WDM DRIVER ERROR 20e)
[wmiacpi.sys+152f at BA3AC52F]
[wmiacpi.sys+152f at BA2EC52F]
[wmiacpi.sys+152f at BA39452F]

From the Driver Verifier Tool of WinXP.

1 more replies
Answer Match 57.54%

I don't have the knowledge to check myself so i would appreciate it, if someone could have a quick scan through these mini dumps and see what is causing my BSOD's. The windows error was Page_fault_in_nonpaged_area. I only have 2 mini dumps, i'm not sure if these will be enough?
 

A:Mini Dump Reading

Both dumps crash at nvata.sys. The OP in this THREAD is using the same version. His solution is at the end.

BugCheck 100000D1, {60, 2, 0, ba72d78c}
Probably caused by : nvata.sys ( nvata+1378c )
ba71a000 ba730d80 nvata nvata.sys Fri Aug 19 08:52:05 2005 (43052D35)
 

1 more replies
Answer Match 57.54%

So here is what I debugged:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80065e8050, Physical Device Object of the stack
Arg3: fffffa800676b060, Functional Device Object of the stack
Arg4: fffffa8005342620, The blocked IRP

Debugging Details:
------------------
OVERLAPPED_MODULE: Address regions for 'athrx' and 'athrx.sys' overlap

DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: fffffa8005342620

DEVICE_OBJECT: fffffa80065e8050

DRIVER_OBJECT: fffffa8006115ac0

IMAGE_NAME: o2sdx64.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 47f47e6c

MODULE_NAME: o2sdx64

FAULTING_MODULE: fffffa6002bd5000 o2sdx64

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from fffff80001cc604e to fffff80001c66650

STACK_TEXT:
fffff800`034f39f8 fffff800`01cc604e : 00000000`0000009f 00000000`00000003 fffffa80`065e8050 fffffa80`0676b060 : nt!KeBugCheckEx
fffff800`034f3a00 fffff800`01c6ebb3 : fffff800`034f3af0 00000000`00000000 00000000`00000001 fffff800`01db7f01 : nt! ?? ::FNODOBFM::`string'+0x18318
fffff800`034f3a70 fffff800`01c6f538 : fffff800`034f3cd0 fffffa80`06214602 f... Read more

A:Need Help deciphering Mini Dump

8 more replies
Answer Match 57.54%

I have had a few BSODs over the last few days and am totally lost as to what the cause is. Here is an example of one of the mini dump files.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\122709-18283-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a12000 PsLoadedModuleList = 0xfffff800`02c4fe50
Debug session time: Sun Dec 27 08:12:32.670 2009 (GMT-6)
System Uptime: 0 days 12:24:22.880
Loading Kernel Symbols
...............................................................
................................................................
........................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Us... Read more

A:Some help with a mini dump analysis

  
Quote: Originally Posted by thesmackdown


I have had a few BSODs over the last few days and am totally lost as to what the cause is. Here is an example of one of the mini dump files.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\122709-18283-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a12000 PsLoadedModuleList = 0xfffff800`02c4fe50
Debug session time: Sun Dec 27 08:12:32.670 2009 (GMT-6)
System Uptime: 0 days 12:24:22.880
Loading Kernel Symbols
...............................................................
................................................................
........................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*****... Read more

5 more replies
Answer Match 57.12%

EDIT 9/6/10

Thanks for the help guys. I found out the problem and my machine is faster than ever booting up and loading now. It was my power supply that was crapping out on me. I had an exact same model I bought about 1 1/2 years ago and I compared the two and the newer one I had was so crappy, they changed the quality over the years. It was lighter and the wires felt cheap, no wonder it went from 60 to 29.99 :[ oh well thanks though guys.

A:BSOD, Mini Dump Attached. Help?

Hi and Welcome back!

The results from the DMP files do not give a definitive answer. While we investigate further here are a few things that you can do.

1-Run a system file check to verify and repair you system files. You do this by typing cmd in search, then right click and run as admin. SFC /SCANNOW

2. I still suggest that this somehow still related to RAM issue, or bad mobo, but let's get to that later.

3-Event viewer
Go into event viewer (type eventvwr in search). Go to the windows log>application tab.

You want to look for critical errors (they have red in the left column ).

When you find them you want to look for critical errors that say app hang, app crash, or anything that relates to the problem.

When you find them please note the event ID, and the source codes and tell us what they are.

4-Device manager
Please go to start>search>type device manager.
Are there any "unknown devices" with yellow triangles on them?
Is you driver there , listed, and working?

If y our driver is missing, or there is a yellow triangle on it, you will need to update it.

5-Driver verifier
please run Verifier with these settings:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the regi... Read more

9 more replies
Answer Match 57.12%

i thought i got rid of the bsod by uninstalling zone alarm pro but it was fine till yesterday ..andf so i put in sygate and after 10 hours i got a bsod.i ran a memtest and after 8 tests it gave me a pass of 8 and errors 0..i also checked the hard drive..even that was fine...is there anything to do with symantec anti virus which i have.....
i have the last threee minidump files.
 

More replies
Answer Match 57.12%

I just experienced a crash on my laptop.

I was surfing the internet and all of a sudden everything crashed and a small blue screen (centred on the screen) popped up and was counting down. I didn't have a chance to get a photo.

It rebooted and upon restarting and logging in, a "windows" window popped up describing the unexpected shutdown event.

The name of the "Problem Event Name" is BlueScreen. It also provides OS version, Local ID, BCcodes, BCP1 etc and a location of the .dmp file.

To provide some scope, I'm on a Macbook Pro running Windows 7, dual booted on a partitioned hard drive. Been using the laptop like this for 2 years.

Should I be concerned? Is there anything I can do to prevent it happening again?

As far as I can tell, everything loaded ok. I'm typing this now using the system. Thanks.

Update: Managed to Open Dump File:

A:Crash/Mini Dump 0x00000050

Hello there!

If it's a one time thing then it's fine. If it happens again then follow this link. Blue Screen of Death (BSOD) Posting Instructions

1 more replies
Answer Match 57.12%

Vista PC keeps going to blue screen and restarts and then keeps doing it until I turn off power and wait for a while.I ran dumpchk on the Minidump file and I got this error 0x1a which Microsoft bug codes (Click here for those) says has to do with MEMORY_MANAGEMENT. My bug code parameter 1 is 0x41790 which isn't listed as a common code but is close to 0x41785 which is listed as: The working set list is corrupted.Also says probably caused by SYMEVENT.SYS Something to do with symantec which we do have the antivirus software installed but sounds like some RAM is maybe bad? Any ideas on if it is bad RAM or something else?

A:Blue Screen Mini Dump

Let's back up a minute. I've recently seen another post with similar issues.The problem with these errors is that you may not see these bugs until something that interacts with the problem software, SYMEVENT.SYS in thiscase, exploits the bug whether it was meant to work that way or not. Bad Drivers can cause this issue also. I would have you run the memory diagnostic utility from the Vista Bootup DVDSee here:http://www.bleepingcomputer.com/tutorials/using-vista-windows-memory-diagnostics-tool/If your memory Tests good, please reboot and Tap the F8 key upon booting the PC, and Arrow down to the Last Known Good Configurationand see if you're able to boot into Vista. If not, See the following Utility to repair Windows Vista:http://www.bleepingcomputer.com/tutorials/repair-windows-with-windows-startup-repair/If Neither of those options are effective, Then you'll want to run A hard drive diagnostic utility to check for a bad hard drive.PS Is this is Desk top or laptop pc?If a Desktop, is it a custom build?

3 more replies
Answer Match 57.12%

This is a win 7 lappy. It has not been run since 2013. It had maleware. Now the young girl needs to go back to school and has give her uncle charlie the job of resurection. I am stuck with a blue screen that happens a few mins after startup.Hoping to get some help finding the driver that is causing the problem.

A:Need help reading mini dump file

For Windows 7 better support is provided at BSOD Help and Support - Windows 7 Help Forums

1 more replies
Answer Match 57.12%

Please Help......I have problems with Windows XP Pro shutting down completely while on the internet. I use a dial up service and get shut down every now and then. It is getting very irritating. I've tried to download and install a patch from MS but it doesn't seem to be working. any help would be greatly appreciated. Thx
 

A:ms windows xp pro Mini Dump errors

7 more replies
Answer Match 57.12%

Hi, I have recently bought an Acer Aspire One 751 netbook and have upgraded it to Windows 7 home premium. Since the upgrade, every so often the screen goes black and i can't do anything with it. CTRL ALT DEL has no effect so am forced to press and hold the power button. I have also had a meesage appear that says 'Minidump' something or other, any idea what is going on with this and how I can stop the back screen crash??
Yours in anticipation

A:Black Screen & Mini dump

Let us see the minidump.

Copy it to another directory, then .rar it, attach to post.

The folder it's at is C:\Windows\Minidump

1 more replies
Answer Match 57.12%

This blue screen of death has been getting to me. I spotted these forums and they seemed helpful to some people but i get a crash dump every day. Im hoping someone can help me figure out the issue. Please see the attached dump file. Have windows 7 64bit.

Please see my attachment. I hope someone can help me out . Thank you !!

Computer specs: (if you need them) 3.06 ghz Intel, Eyefinity Graphics Card, 12 GB ram, Asus motherboard, nothing overclocked - and working on 4 monitors (not sure if that has anything with the driver thing)

More replies
Answer Match 57.12%

Hello everyone,

I did some reading around on previous topics regarding mini dump errors I keep getting, but I'm unsure of how to analyze the file to tell what is causing it. I suspect it may be my memory, but I'm not an expert.

The OS usually crashes and goes into a blue screen for a few seconds, then the system reboots itself. My computer is fine when it's idle, but the problem can occur when I'm switching back and forth between Internet Explorer windows, or doing something active.

Also, MS Flight Simulator 2004 crashes VERY frequently, but it won't always cause the system reboot. Sometimes, it just crashes and brings me back to the desktop.

I've attached my mini dump file to this thread, as well as a screenshot of an error message I got (I'm pretty sure this is one of the "Your system has recovered from a serious error" messages that I got when the computer rebooted itself after a blue screen.)

Thanks in advance for any help!

Edit: I've attached more minidump files, as requested. Thanks!
 

A:Mini Dump Error and Crashing

You'll need to post a few more minidump files.
 

6 more replies
Answer Match 57.12%

I am having constant BSOD Occurrences. I am attaching the mini dump files from the crashes. If you could help me figure out what is causing these I would appreciate it. I have also attached my system info.



Thanks,

JPerrin

A:Need Help With BSOD, and Mini Dump Files

Code:
fffff880`0a122610 fffff880`04d8e748Unable to load image BHDrvx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BHDrvx64.sys
*** ERROR: Module load completed but symbols could not be loaded for BHDrvx64.sys
BHDrvx64+0x14f748
What is bhdrvx64.sys ? | System Explorer

Code:
fffff880`0a122870 fffff880`043aff00Unable to load image SYMEVENT64x86.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMEVENT64x86.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT64x86.SYS
SYMEVENT64x86+0x26f00
What is symevent64x86.sys ? | System Explorer

Uninstall Norton and all Symentec products using Norton Removal tool. At least as a test. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know the result.

1 more replies
Answer Match 57.12%

A few days ago I began getting BSODs. I have have been trying to get my pc to save the minidumps to no avail. However I did stop it from restarting automatically so I could write down the information.

Kernel Data Inpage Error
0x0000007a (0x00000020, 0xc000009d, 0x96D0A70C, 0x0000000)


Initially I thought it was because of a new graphics card driver that I had installed but I did a complete windows install and after it was finished I logged into windows and I got another BSOD. I overclocked my PC about a week ago but had no issues for a week. I decided to set my bios to default settings anyways. I have a feeling it might be somehow related to my crucial m4 SSD bootdrive. I tried updating the firmware but it said it was up to date, when i tried to force it to update anyways it said that no eligible drive was found. Any help would be appreciated.

- System

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2013-07-07T02:07:39.351608500Z

EventRecordID 2013

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Ryan-PC

- Security

[ UserID] S-1-5-18


- EventData

BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProg... Read more

A:New BSOD 0x0000007a, no mini dump

Hello Ryan and welcome to the forums. Have you updated the firmware on your Crucial M4? The latest firmware is 070H and can be downloaded from Crucial's site. Due to the fact your SSD is your boot drive, you will need to download the third one, the bootable version. I believe it is an .ISO file and you will need to burn it to a CD and boot from the CD. The instructions are there too. Let us know how it goes and if you need any further help with the update.

4 more replies
Answer Match 57.12%

So i got a random bsod and i think i know what the issue is but not 100 percent sure,anyone can read these mini dump files for me and help me if they can?let me know ill be glad to zip them up for you
 

A:Help reading mini dump files

Hi Rud3bwoy,

If you can upload them, then I'm sure one of us will proceed to debug them

Maybe even me, if I get bored at work
 

4 more replies
Answer Match 57.12%

I had just finished copying some photos from a photo card. I was going back to the photo card for some more, when the blue screen came up. This is not the first time this has happened. The first time we took the computer back where we purchased it (still under warranty). They could not find anything wrong, but reinstalled Windows Vista. I recently upgraded to Windows 7 and when a blue screen appeard, I rebooted in safe mode, shut down correctly and rebooted normally. The system seemed to work fine, until another blue screen. I'm not sure how many times this has happended but since I just found your forum and it just happend, I thought I would see what you could do.

I've included the information given at the time of the dump, the system information and have attached the "Windows7_Vista_jcgriff2.zip" and "PERFMON html" files.

OS: Windows 7 Professional Service Pack 1 x64
Original: Vista
I purchase a full version of Windows 7
Age: 2006
Age of OS Install: within the last 6 months
CPU: ACPI x64-based PC (Not sure if this is correct)
Video Card: NVIDIA GeForce 9200
MotherBoard: Athlon (tm) Dual Core Processor 4850e
Power Supply: ?

Blue Screen Mini Dump
OS Version-6.1.7601.2.1.0.256.48
Locale ID-1033
BCCode-d1
BCP1-000000000000000A
BCP2-0000000000000002
BCP3-0000000000000000
BCP4-FFFFF88008ECDFCD
OS Version-6_1_7601
Service Pack-1_0
Product-256_1

C:\Windows\Minidump\062412-17347-ol.dmp
C:\Users\Kristie\AppData\Local\Temp\WER-37253-0.sysdata.xml

A:Blue Screen-Mini Dump

Hi -

You need to find a driver update for your RangeMax NEXT Wireless-N USB Adapter WN111 -

Code:

MRVW24C.sys Sun Oct 28 23:22:31 2007 (472551F7)

http://sysnative.com/drivers/driver.php?id=MRVW24C.sys

It's too old for Windows 7 SP1.

Regards. . .

jcgriff2


`

BSOD SUMMARY


Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\062112-18018-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Thu Jun 21 13:20:35.321 2012 (GMT-4)
System Uptime: 0 days 0:00:54.100
BugCheck D1, {28, 2, 0, fffff88001408ce6}
*** WARNING: Unable to verify timestamp for MRVW24C.sys
*** ERROR: Module load completed but symbols could not be loaded for MRVW24C.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : NETIO.SYS ( NETIO!NetioAdvanceNetBufferList+26 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0xD1_NETIO!NetioAdvanceNetBufferList+26
Bugcheck code 000000D1
Arguments 00000000`00000028 00000000`00000002 00000000`00000000 fffff880`01408ce6
BiosVersion = R01-A2S3
BiosReleaseDate = 07/29/2008
SystemManufacturer = Acer
SystemProductName = Aspire X1200

??????????????????????????????????????????????????????????????????????????????????????``

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\062412-17347-01.dmp]... Read more

5 more replies
Answer Match 57.12%

Hello everyone, recently every time I attempt to log in into my computer it freezes after sign in, and goes to a blue screen. Here is the information on the issue.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: 0000000000000200
BCP3: 0000000000000008
BCP4: 0000000000000200
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini121610-01.dmp
C:\Users\ToUniek\AppData\Local\Temp\WER-59342-0.sysdata.xml
C:\Users\ToUniek\AppData\Local\Temp\WERE52.tmp.version.txt

I did install four programs to assist me with a previous malware issue.

Spybot
SuperAntiSpyware
HackThis
MalwareBytes

I've also included my memory dumps in this zip bellow for anaylsis.

A:Mini Dump Blue Screen

Bump.

10 more replies
Answer Match 57.12%

Hi

I have an Acer laptop that runs Win XP home, after a rebuild there is a lot of blue screen errors. I have read the minidump files and think its down to a harddrive error but would like confirmation that this is the error. I have attached the log.

Microsoft ® Windows Debugger Version 6.12.0002.633 X86
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Gary PC\Desktop\Minidump\Minidump\Mini111210-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

WARNING: Whitespace at start of path element
Symbol search path is:
SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 3) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 2600.xpsp_sp3_gdr.100427-1636
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x80554040
Debug session time: Fri Nov 12 10:55:51.781 2010 (UTC + 0:00)
System Uptime: 0 days 0:24:06.355
Loading Kernel Symbols
...............................................................
................................................................
.
Loading User Symbols
Loading unloaded module list
................
*******************************************************************************
* *
* Bugcheck Analysis ... Read more

A:Mini Dump File for Win XP Home

Let's try this.Download/install BlueScreenView, http://www.nirsoft.net/utils/blue_screen_view.html.Double-click BlueScreenView.exe file.When scanning is done, Edit/Select All...then File/Save Selected Items.Save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content and paste it into your next reply.Louis

5 more replies
Answer Match 57.12%

Windows XP Home SP2
Spontaneous re-boots due to bug check

I disabled: system properties > advanced > startup & recovery / settings > failures / automatically restart

Event viewer > save dump.

I have read KB 385271 [ how to use dump check ] & KB 314084 [ how to gather information after a dump check ]. I tried to use pstat.exe to solve the problem, but I am unskilled.

Your guidance will be appeciated.

B123
 

A:Solved: analyze mini-dump

7 more replies
Answer Match 57.12%

Hello please help

My Windows 2003 server keeps blue screening. I have included the mini dump below.

I would be very grateful if someone could make sense of this

P.S First time poster


Microsoft (R) Windows Debugger Version 6.8.0004.0 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Documents and Settings\shaner\Desktop\CB MinDump\Mini112107-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: C:\WINDOWS\symbolsServer2003
Executable search path is:
Unable to load image \WINDOWS\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Windows Server 2003 Kernel Version 3790 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: LanManNt, suite: SmallBusiness TerminalServer SmallBusinessRestricted SingleUserTS
Kernel base = 0x80800000 PsLoadedModuleList = 0x808af9c8
Debug session time: Wed Nov 21 12:14:57.875 2007 (GMT+11)
System Uptime: 2 days 23:17:50.192
Unable to load image \WINDOWS\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Loading Kernel Symbols
.......................................................................................................................................
Loading User Symbols
Loading unloaded module list
.................................................
*** WARNING: Unable to verify timestamp for Ntfs.sys
****************************... Read more

A:Mini Dump IMAGE_NAME: Ntfs.sys

This usually points to a corrupted hard drive file or files... Run CHKDSK /r and watch for errors
 

2 more replies
Answer Match 57.12%

Hi,
Got a new quad-core build and since first turn on iv been experiancing bsod problems. At first, it was while trying to install Windows 7, in the middle of unpacking files (random points) managed to ge installed but now happens randomly, thought it was when i plugged certain usb ports, but after unplugging everything it still hapens randomly.
The first mini dump was after i named the pc on first startup and it went to 'personalising desktop', the second same, and the last two at random points, any helps would give me the biggest stress relieve of my life!
thanks in advance

1.
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Windows\Minidump\020811-18236-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: srv*C:\symbols*http://msdl.microsoft.com/download/s...ols;C:\Program Files\Debugging Tools for Windows (x64)
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`0261e000 PsLoadedModuleList = 0xfffff800`0285be50
Debug session time: Tue Feb 8 18:15:21.517 2011 (UTC - 8:00)
System Uptime: 0 days 0:00:58.328
Loading Kernel Symbols
...............................................................
................................................................
........
Load... Read more

A:help with bsod reading mini dump

http://www.sevenforums.com/crashes-d...tructions.html

1 more replies
Answer Match 57.12%

Heres what I have,
I have a prebuilt rig Asus CM5675 under warante

Windows 7 Home Premium

Intell Core i5 650

Southbridge intell H55 chipset

I am getting BSOD seemingly when I begin to use to much RAM. I have clean installed twice and still same thing. BSOD only seems to happen when I am preforming large or multiple tasks such as video editing and conversion. I was in the mids of learnign how to flash my BIOS when someone said my BIOS shouldnt be causeing kernel panics. Anyhow I think I will do it anyway when I find the right BIOS (theres so much blah blah on Asus' site. So I read a post on here that said to post my mini dump so people can help me with this problem. I will be taking this back to the store if it dosnt stop. I should have built my own rig! its a Service_Exception error heres the dump///

A:BSOD Asus Mini Dump

  
Quote: Originally Posted by kaoticsolja


Heres what I have,
I have a prebuilt rig Asus CM5675 under warante

Windows 7 Home Premium

Intell Core i5 650

Southbridge intell H55 chipset

I am getting BSOD seemingly when I begin to use to much RAM. I have clean installed twice and still same thing. BSOD only seems to happen when I am preforming large or multiple tasks such as video editing and conversion. I was in the mids of learnign how to flash my BIOS when someone said my BIOS shouldnt be causeing kernel panics. Anyhow I think I will do it anyway when I find the right BIOS (theres so much blah blah on Asus' site. So I read a post on here that said to post my mini dump so people can help me with this problem. I will be taking this back to the store if it dosnt stop. I should have built my own rig! its a Service_Exception error heres the dump///


These were caused by MDFSYSNT.sys which is a Mac driver. Are you by chance running win 7 from boot camp?
Waiting for info before suggesting a fix



Code:
MDFSYSNT.sys 6/22/2009 15:52:50 0x4a3fef22 fffff880`01823000 fffff880`01882000 MDFSYSNT.sys+6ec4 0x0005f000
MDPMGRNT.SYS 7/6/2009 16:05:22 0x4a526712 fffff880`015f0000 fffff880`015fd000 0x0000d000
Launchpad caused mdfsysnt.sys to fail


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Load... Read more

3 more replies
Answer Match 57.12%

I have a general question, if someone wouldn't mind answering. Is a mini dump during a BLUE screen different than a Blue screen? From one of the other posts here, I get the idea that a blue screen with a minidump is not so bad. Is this true?

I had a blue screen with the following information: (I am also a newbie, so bear with me)
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 00000008
BCP2: 00000002
BCP3: 00000001
BCP4: 8E503B67
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini092210-01.dmp
C:\Users\Kathy\AppData\Local\Temp\WER-817476-0.sysdata.xml
C:\Users\Kathy\AppData\Local\Temp\WEREEB1.tmp.version.txt

I received this just after I listened to an MP3 on Google Chrome brower, and I have Windows Vista Home Basic on a Dell Inspiron E1505 with Dual Core Intel Processor, 2 GB memory and a HD of 60 GB.
Thanks!

Kathy
 

More replies
Answer Match 57.12%

Hi Guys,

Every few weeks I seem to get the computer just turning off. The last time it was writing to an external Maxtor Hard Drive when it happened, but that's not always the case.

The event log shows error 1000008e. I've included the last few mini dumps in a zip file. Can anyone shed some light on this?

Your help would be much appreciated.

Thanks,

Les
 

A:1000008e - mini dump attached

Four of the dumps have memory errors, and this is a sign of faulty RAM. Run Memtest to test the RAM.
 

2 more replies
Answer Match 57.12%

Hi.
 
What's the best program to use for reading mini dump files?

More replies
Answer Match 57.12%

Hi there,
I've got frequent reboots on a machine running XP SP3. The reboot was happening a few seconds after the user logon. It's not hardware related cause the pc is running smoothly after a format. I've attached the dump file for anyone who can read it.

Thanx for any replies

A:[SOLVED] mini dump analysis

looks like malware to me.
http://www.techsupportforum.com/f50/


Quote:




Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Documents and Settings\BH\Desktop\Mini090309-03\Mini090309-03.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 3) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp3_gdr.090206-1234
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055b1c0
Debug session time: Thu Sep 3 07:52:28.750 2009 (GMT-7)
System Uptime: 0 days 0:00:32.328
Loading Kernel Symbols
...............................................................
...................................
Loading User Symbols
Loading unloaded module list
..
Unable to load image zkvcegrnqthwm7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for zkvcegrnqthwm7.sys
*** ERROR: Module load completed but symbols could not be loaded for zkvcegrnqthwm7.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

3 more replies
Answer Match 57.12%

I keep getting these blue screen crashes. It happens randomly at night... possibly when McAfee does a scan. It also happens every time I do a full scan at 98% complete.

052015-8845-01.dmp 5/20/2015 5:46:34 PM PFN_LIST_CORRUPT 0x0000004e 00000000`00000099 00000000`0025eebb 00000000`00000002 00000000`00242fba fltmgr.sys fltmgr.sys+52c8 x64 ntoskrnl.exe+748c0 8 15 7601 316,928 5/20/2015 5:47:26 PM

052015-9157-01.dmp 5/20/2015 11:31:26 AM PFN_LIST_CORRUPT 0x0000004e 00000000`00000099 00000000`0005df77 00000000`00000002 00000000`00066f38 nvlddmkm.sys nvlddmkm.sys+205866 x64 ntoskrnl.exe+748c0 8 15 7601 317,640 5/20/2015 11:34:58 AM

My computer is well built and new. I am running Windows 7 64 bit.
I recently re-installed all OS and drivers and have run a virus scan.

Thanks for your advice.

A:BSOD - mini dump crashes

Blue Screen of Death (BSOD) Posting Instructions

1 more replies
Answer Match 57.12%

pls would u analyze my minidumps too.. I get bsod on boot then my laptop reboots and later can start only in safe mode, safe mode with networking and from the last known good configuration. cant start in normal mode. windows 7. this happed after some updates if im not wrong. thx
 

A:Windows 7 mini dump files

Looks like an Atheros driver problem...
SYSTEM_THREAD_EXCEPTION_NOT_ HANDLED
 

3 more replies
Answer Match 57.12%

Been getting random BSOD since adding some new RAM to the system. I know bad RAM is the most likely culprit but this has been happening with several different combitions of sticks (All the same brand/model), though I have yet to run memtest86+ on this specific set just added.

The dump files are attached, thanks.

A:Can someone analyze some mini dump files?

Please do run the Memtest. Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

Be sure to run it on all the sticks at the same time, to start out with.

I see you have Astra installed. Be update it to the latest version, or remove it altogether.
Code:
ASTRA64.sys Wed May 04 06:33:22 2005 (4278A4F2)

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jonathan\Desktop\061710-27487-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02a60000 PsLoadedModuleList = 0xfffff800`02c9de50
Debug session time: Thu Jun 17 17:12:13.286 2010 (UTC - 4:00)
System Uptime: 0 days 1:24:02.566
Loading Kernel Symbols
...............................................................
................................................................
..........................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* ... Read more

2 more replies
Answer Match 57.12%

Hello VistaForums enthusiests, I was wondering if anyone here is willing to look at a memory dump file that my cpu left after it gave me the blue screen of death last night. Any help would me much apreciated. I will place a link with the dump file at the end of this post.

Blue Screen Error.zip

A:Blue screen mini dump help!

normally blue screens are the result of new hardware or software (or even updated drivers, software or firmware on your pc becoming corrupt) so as a last resort go and do a system restore, but first uninstall any new hardware, software, firmware or drivers from your system and reinstall with the latest patches, drivers etc.
If it keeps doing it then system restore your pc

more replies
Answer Match 57.12%

first reaction was that it was for the firewall, but now I'm beginning to question the image.

Any input?
Microsoft (R) Windows Debugger Version 6.8.0004.0 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Documents and Settings\piercet\Desktop\mweber\Mini030208-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: C:\WINDOWS\Symbols
Executable search path is:
"nt" was not found in the image list.
Debugger will attempt to load "nt" at given base 00000000.

Please provide the full image name, including the extension (i.e. kernel32.dll)
for more reliable results.Base address and size overrides can be given as
.reload <image.ext>=<base>,<size>.
Unable to load image nt, Win32 error 0n2
Unable to add module at 00000000
Debugger can not determine kernel base address
Windows XP Kernel Version 2600 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805624a0
Debug session time: Sun Mar 2 06:36:10.515 2008 (GMT-6)
System Uptime: 0 days 0:54:27.246
"nt" was not found in the image list.
Debugger will attempt to load "nt" at given base 00000000.

Please provide the full image name, including the extension (i.e. kernel32.dll)
for more reliable results.Base address and size overrides can be given as
.reload <image.ext>=<base>,<size>.
Unable to load image nt, Win3... Read more

More replies
Answer Match 57.12%

Whenever I try to open or look at a mini dump file, the symbol for the file looks like the media center symbol. When I click on the symbol, media center opens. I have uninstalled my debugger (reads the mini dumps) to no avail. Any help?
Moderators, please, do not move this post since the advice of the BSOD people is needed.

A:Cannot Open Mini Dump Files

Hate having to ask but have you associated "DMP" files with Windbg in cpanel?

9 more replies
Answer Match 57.12%

I have a mini-dump file I would like to have deciphered, can anybody help?
 

A:Contents of mini-dump file

Same driver as a week ago: http://www.techspot.com/vb/topic147871.html

Thanks for starting your own thread.
 

3 more replies
Answer Match 57.12%

I have a Gulftown 990X system
6G triple channel ram.
Windows 7 64bit Home premium retail upgrade version. SP1

I recently uninstalled MSE due to errors it was having with system.

The problem I am having is the system likes to reboot for reasons unknown. Sometimes when firefox or chrome are open, and others just at the main screen.

System is all new.

And OS is fresh install but was used on prior PC. No migration of old files to new system.

A:Kinda clueless mini dump.

To continue: It seems when MSE installs I get the little flag message saying to turn off windows defender. When I open defender directly it says its off. If I use the flags link it opens my C: system32 folder. If I uninstall MSE defender turns on but the flag spams me with the turn defender on warning. Reinstall MSE and flag flashes turn defender on when its off.

Add Infinitum.

THX

9 more replies
Answer Match 57.12%

Edit: I've moved this thread to the Windows OS forum.
 

More replies
Answer Match 57.12%

my pc does random BSOD or freezing and rebooting without bsod. after many attemps at using the debugging tools i finaly got it to the analysis part and i need a little help figuring out how to read it. system specs are

phenomII x4 945 3.0
4 gig ram
win 7 64 bit os


analysis report:

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.402 X86
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Windows\Minidump\100510-14258-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
WARNING: Whitespace at end of path element
Symbol search path is: SRV*DownstreamStore*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a5f000 PsLoadedModuleList = 0xfffff800`02c9ce50
Debug session time: Tue Oct 5 20:44:51.041 2010 (GMT-4)
System Uptime: 0 days 1:58:20.867
Loading Kernel Symbols
.............................................Unable to load image Unknown_Module_00000000`00000000, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Unable to add module at 00000000`00000000
Loading User Symbols
Missing image name, possible paged-out or corrupt data.
Loading unloaded module list
..Missing image name, possible paged-out or corrupt data.
... Read more

A:help reading analysis of mini dump

Hi -

The bugcheck = 0x7e (0xc0000005,,,) = kernel threw an exception (error) - 0xc0000005 = memory access violation

The dump shows OS corruption occurring -

Code:
Unknown_Module_00000000`00000000
Unable to add module at 00000000`00000000

Missing image name, possible paged-out or corrupt data.
Loading unloaded module list
..Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
...Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
Missing image name, possible paged-out or corrupt data
Run memtest86+ - http://www.techsupportforum.com/2863029-post5.html

Run HDD diagnostics - http://www.techsupportforum.com/2828431-post7.html

If Hardware diagnostics pass, run the Driver Verifier - http://www.techsupportforum.com/f217...ed-473665.html

Provide system info - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2... Read more

1 more replies
Answer Match 56.7%

Hi
I've been trying to run cds and dvds on my computer but neither will open. When i put a disc in, the dvd drive tries to read the disc and freezes up windows (i can move my mouse and min/maximize things but that's all). I have to restart the computer to regain functionality. Once when I put in a cd it gave me the option to play music but when I clicked play music cd it failed to load. I have another desktop computer (windows xp) that I put the same dvd drive into and it opened the dvd I've been testing right away. Which is why I don't think the drive is the problem. I've already tried uninstalling the drive and updating drivers. Thanks for reading this and hopefully someone can help. I've also tried the windows fix it tool.

Specs:
Windows 7 professional
mobo: K9n Neo V3
Dvd drive: HL-DT-ST DVDRAM GH20NS10 ATA device
processor: AMD 64 X2 Dual Core 6000+
ram: 3gb
I'm assuming this is all the necessary specs, if not let me know.
 

A:Dvd drive won't read discs and freezes computer

Your hardware spec looks fine.
According to my experience, usually it's due to the cd problem,like scratch...
have you tried to play this cd in your cd player and it works?
 

2 more replies
Answer Match 56.28%

Hi Thanks is advance again for the help!

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>2</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000000000000002</Keywords>

<TimeCreated SystemTime="2011-02-03T23:13:02.196824000Z" />

<EventRecordID>105507</EventRecordID>

<Correlation />

<Execution ProcessID="4" ThreadID="8" />

<Channel>System</Channel>

<Computer>Chrissy-PC</Computer>

<Security UserID="S-1-5-18" />

</System>


- <EventData>
<Data Name="BugcheckCode">209</Data>

<Data Name="BugcheckParameter1">0x44</Data>

<Data Name="BugcheckParameter2">0x2</Data>

<Data Name="BugcheckParameter3">0x0</Data>

<Data Name="BugcheckParameter4">0xfffff88003cd28c1</Data>

<Data Name="SleepInProgress">false</Data>

<Data Name="PowerButtonTimestamp">0</Data>

</EventData>


</Event>

A:BSOD again.....attached mini dump this time

Source of the crash is the Atheros wireless lan driver apparently.

Hopefully you can find a updated driver for the device, the one you are using appears to be faulty.
http://www.atheros.cz/

Edit: I also notice you have AVG, you could try disabling it and see if that helps to. With some system configurations AVG has been known to cause bsod's.

9 more replies
Answer Match 56.28%

I am trying to debug a minidump on Windows 7 x64 7229 but I am having a problem with the Symbols.

I have downloaded and installed:

Debugging Tools for Windows - Native x64 (version 6.11.1.404)
[dbg_amd64_6.11.1.404.msi]

Windows 7 x64 symbols
[Windows_Winmain.7100.0.090421-1700.AMD64FRE.Symbols.msi]
[Windows_Winmain.7100.0.090421-1700.AMD64CHK.Symbols.msi]

I have also added the Symbols path H:\Symbols, where all the installed symbols reside

Unfortunately the Windows Debugger complains that I am using the wrong
Symbols.

A:problem reading mini dump file

have you tried the dumpchk.exe tool? because from what I read at Microsoft, it doesn't require access to debugging symbols.

How to read the small memory dump files that Windows creates for debugging

9 more replies
Answer Match 56.28%

I keep getting a Mini dump Error, tried to copy n paste it, wouldn't allow, then took screenshot, and lost it - so next time it happens i`ll edit and upload it - in mean time here is my reports, hope rar is ok....

A:BSOD Random Mini Dump Error

Your BIOS dates from 2012. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard. If possible, use the "inside Windows" flash mechanism (if your OEM provides one).

Only 156 Windows Updates installed. Most systems have 170 to 190 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Lot's of .NET framework errors. I'd suggest uninstalling them and then reinstalling them. Suggestions on how to do it are here: https://www.google.com/search?q=rein...x-a&channel=sb

Please remove all antivirus and all firewalls.
Then enable Windows Defender and Windows Firewall
Test to see if this stops the BSOD's
More than one antivirus and/or more than one firewall can cause problems (to include BSOD's) because they are competing with each other.

Please uninstall LogMeIn (dates from 2007/2008) and the Cyberlink software (dates from 2011) as they are older than Windows 8.

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings
Analysis:
The following is for informational purposes only.

Code:
**************************Thu Sep 18 06:24:12.319 2014 (UTC - 4:00)*****************... Read more

1 more replies
Answer Match 56.28%

Hi, my daughters machine has started misbehaving today with a few blue screens and other erratic issues. When I check Windows/Minidump I have just 1 entry which I have attached in hope someone can shed some light on the BSOD issue, but when I go to "Disk Cleanup" I have 554MB of "system error memory dump files", where can I find these files please?

I have installed SDK for Windows 8.1 hoping I can have a look at these files, but can someone explain(in simple terms) to me about symbols and an address to use to get symbols? I have done this once before(long time ago) but I am very much a noob when it comes to exploring dump files although very keen to learn more.

Any help or guidance very much appreciated!

A:BSOD after start up just 1 mini dump entry

Unfortunately, its not that easy to explain how to analyse a .dmp file in a thread such as this. However, you can setup WinDBG with the symbols by following this:

WinDBG - Install and Configure for BSOD Analysis

In terms of the .dmp file, its inconclusive, but 0xF4 bugecks are often an indication of a hard disk problem. Please run the DOS version of SeaTools to check the health of the hard disk:

SeaTools for DOS and Windows - How to Use

You can delete older versions of the .dmp files by logging in as the computer administartor, then opening up Windows Explorer and choosing to show Hidden Files and Folders:

Attachment 343676

Now browse to C:\Windows\Minidump and delete all the .dmp files you do not require.

1 more replies
Answer Match 56.28%

Can someone please tell me what my mini dump means my PC as restarted 3 times in 10 minutes.

STOP : 0x0000008E (0xC0000005, 0x8054A832, 0xEFD56C3C, 0X00000000)

Any help would be much appreciated.
 

A:BSOD STOP 0x0000008E Mini Dump help

Thse are my 5 most recent mini dumps.
Thanks
Mike
 

5 more replies
Answer Match 56.28%

Help! My computer lately keeps coming up with the BSOD. Tried to access the mini dump file, but it wont let me in. I've tried changing the ownership and nothing.
It wont even let me zip it.
Dell technicians are useless, have no clue on whats wrong.
Haven't added anything (software or hardware) to computer. Not sure whats going on. Last time this happened was 09/16/09 @6:00 est.

Thanks, Keith

A:Unable to view mini dump file

Copy the minidump(s) to another folder before attempting to zip them.

more replies
Answer Match 56.28%

This is a newly built machine Gigabyte Board Z170-Gaming, I7-6700, 32 GB DDR4 Ram, MSI R7 370 4GB GDDR5, NO OVERCLOCKING, 240 SSD (OS), 1-640GB WD HD, 3-320 GB HD's, 1- 2TB HD, 1- 1TB HD, & 1-120 GB External, Current Bios F7 flashed yesterday (Blue Screen
occured prior to flashing)...Windows 7 Pro SP1

This has happened 6 times respectively with BCCODE being either 50, or 1a
  Problem Event Name:
BlueScreen

  OS Version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

Additional information about the problem:
  BCCode: 50, and BCCODE 1a
  BCP1: FFFFFCA015888030
  BCP2: 0000000000000000
  BCP3: FFFFF80003258280
  BCP4: 0000000000000007
  OS Version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1
Files that help describe the problem:

  C:\Windows\Minidump\073116-14055-01.dmp
  C:\Users\AppData\Local\Temp\WER-33899-0.sysdata.xml

More replies
Answer Match 56.28%

Hi guys

my new Windows 7 and PC seems to be crashing after Windows Update (numerous updates were done)...

Please can someone analyse the minidump file and tell me what the most likely problem is.


Thank you
Mark
 

A:Windows 7 Mini Dump Files - Please analyze

Your issue is with the firewire driver 1394ohci.sys Microsoft has done a fix for this and Windows 7.

See this link: http://www.rme-audio.de/forum/viewtopic.php?id=8131
 

1 more replies
Answer Match 56.28%

Hi guys can you have a look at my mini dump please i keep getting random crash's but have no idea whats causing it.

Cheers

A:Windows 7 BSOD (Mini Dump attached)

It looks to me that it's associated with your Authentium protection program (amp.sys).
But it could also be an issue with your Silicon Image driver - comes with package for the SIxxxx drivers (controls the hard drives).

But, to add to your problems, there's these other BSOD causing issues:
- the ASACPI.sys driver dated from 2004
- the Speedfan drivers dated from 1996 and 2006
- numerous other drivers that are over 2 years old

So, please do this:
1 -




Quote:
Anti-Virus Removal:
Please do the following:
- download a free antivirus for testing purposes: Free AntiVirus
- uninstall the Authentium product from your system (you can reinstall it, if so desired, when we're done troubleshooting)
- remove any remnants of Authentium using this free tool: Authentium: What Safe Feels Like
- IMMEDIATELY install and update the free antivirus
- check to see if this fixes the BSOD's


2 - Download the 32 bit Windows 7 driver from this link: Silicon Image - Support | Search Results
- Uninstall the current drivers
- Install the freshly downloaded drivers

3 - Go to this link: ASUSTeK Computer Inc.-Support-
- enter your system info and then specify Windows 7 (32 bit)
- scroll down to the Utilities section and download the Asus ATK0110 ACPI Utility driver and install it
NOTE: This is a known cause of BSOD's and must be updated.

4 - Also, please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the... Read more

1 more replies
Answer Match 56.28%

I have been getting constant BSODs on my second PC which is 3-4 years old but has been rock solid previously.

Specs-
OS- Win 8.1 64 bit.
RAM 24GB (Tested overnight with MemText+ with ZERO errors)
Quadro Fx4000- This card has no Win 8.1 64bit drivers. Windows automatically installed Version 340.52 driver.
It could be that this is source of all my crashes but not sure as sometimes it goes many days without crashing. Then 5 BSOD in a day.
MOBO- Asus P6TDeluxe V2....up to date drivers. I have visually inspected it and all capacitors look in good shape.

Mini dump file link- Sorry about the free file host.
Minidump.zip :: Free File Hosting - File Dropper: File Host for Mp3, Videos, Music, Documents.

Accordign to WhoCrashed software it seems to be software issue rather than hardware.

Any help would be highly appreciated

A:Analyse my MINI DUMP file please. BSODs. Thanks :-)

Update drivers in red. How did you test your memory? One stick at a time for at least eight passes is the right way to do it. Start additional HW tests: Hardware Diagnostics

Code:
mv61xxmm.sys Wed Feb 9 10:28:40 2011 (4D525E48)
Marvell 61xx RAID controller
http://www.carrona.org/drivers/driver.php?id=mv61xxmm.sys

mv61xx.sys Wed Feb 9 10:28:49 2011 (4D525E51)
Marvell Thor Windows Driver
http://www.carrona.org/drivers/driver.php?id=mv61xx.sys

ASACPI.sys Fri Nov 2 02:54:34 2012 (509327DA)
Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities (Win8 versions available from Windows Update as an Optional Update - but check Asus first!)
http://www.carrona.org/drivers/driver.php?id=ASACPI.sys

yk63x64.sys Wed Jan 9 16:46:56 2013 (50ED90F0)
NDIS6.30 Miniport Driver for Marvell Yukon Ethernet Controller
http://www.carrona.org/drivers/driver.php?id=yk63x64.sys

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

nvhda64v.sys Thu Nov 28 14:38:09 2013 (52974741)
nVidia HDMI Audio Device (nForce chipset driver)
http://www.carrona.org/drivers/driver.php?id=nvhda64v.sys

nvlddmkm.sys Wed Jul 2 19:42:02 2014 (53B4446A)
nVidia Video drivers
http://www.carrona.org/drivers/driver.php?id=nvlddmkm.sys

Debug session time: Sat Feb 14 09:54:38.006 2015 (UTC + 1:00)
Loading Dump File [C:\Users\Mihael\SysnativeBSODApps\021415-14312-01.d... Read more

8 more replies
Answer Match 56.28%

So I'll have random blue screens. Some things trigger it more than others. The computer usually will BSOD even when its idle. I can play hours of games without it crashing the only issue I have is playing a game of league of legends.. not IN the game itself but on the character selection screen. Anyway.. I've been having this problem for a LONG time I just havent had the time to repair it. I just need some help. Not doing a complete restore would be preferable. I just want to know whats causing the problem so I can go about fixing it. It doesn't seem to crash when running games but rather when its doing nothing or browsing the web.
 
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800037a9f39, Address of the instruction which caused the bugcheck
Arg3: fffff8800b3bc8f0, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
 
Debugging Details:
------------------
 
 
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
 
FAULTING_IP: 
nt!CmpGetNameControlBlock+12e
fffff800`037a9f39 3b3e            cmp     edi,dword ptr [rsi]
 
CONTEXT:  fffff8800b3bc8f0 -- (.cxr 0xfffff8800b3bc8f0)
rax=fffff8a000011000 rbx=0000000000000000 rcx=fffff8a000014c30
rdx=000... Read more

A:Windows 7 BSOD. Help please. Mini Dump Attached.

Hi
 
Please copy all the dump files located inside "C:\Windows\Minidump" folder. Zip them and upload using any free file hosting site like "Mediafire".
 
Attach the download link for the dumps in next reply. 
 
Please download MiniToolBox from http://www.bleepingcomputer.com/download/minitoolbox/
 
 Save it to your desktop and run it. Checkmark the following boxes:
 
•List last 10 Event Viewer log
•List Installed Programs
•List Users, Partitions and Memory size.
•List Minidump Files
 
Click Go and copy / paste the result in next reply.
 
Also please publish a snapshot of your system by following this guide : http://www.bleepingcomputer.com/forums/t/323892/publish-a-snapshot-using-speccy/
You don't need to paste the output of speccy. Instead copy and paste the web link given by Speccy.

8 more replies
Answer Match 56.28%

Hello,

This is my first post, so if I forgot to do something or did it incorrectly, feel free to let me know.

I bought an HP Pavillion last August, and it came with Windows Vista, and the promise that I would get a free upgrade to Windows 7 when it came out. After going through a fair amount of headaches and red-tape, I finally got my upgrade disc. I upgraded my OS last Monday. I was given instructions to remove anti-virus software (which was preventing installation), and I was also told that iTunes and my keyboard may cause issues upon upgrade. I figured this just meant that they might not perform as well, so I ignored it and continued with the upgrade.

The first time I booted up Windows 7, I got a BSOD within seconds after my desktop loaded completely. Sometimes I will get a few minutes (one time, I even got about an hour or so) before the BSOD hits. I was able to uninstall iTunes, and run Blue Screen Viewer. Blue Screen Viewer told me that it was likely that my ntoskrnl.exe was causing the problem. After researching ntoskrnl.exe, I found out that it is sometimes caused by keyboard driver issues, but I can't be sure that is the problem.

If anyone thinks it will help, I can post the exact text of my BSOD. However, since I was unsure if I needed to do so, I opted to include the mini-dump files for now. I can also say that the BSOD always includes the text "SYSTEM_SERVICE_EXCEPTION."

I would like to resolve this problem without losing my current data (I was fool... Read more

A:BSOD upon start-up, mini-dump attached

  
Quote: Originally Posted by cobbljock


Hello,

This is my first post, so if I forgot to do something or did it incorrectly, feel free to let me know.

I bought an HP Pavillion last August, and it came with Windows Vista, and the promise that I would get a free upgrade to Windows 7 when it came out. After going through a fair amount of headaches and red-tape, I finally got my upgrade disc. I upgraded my OS last Monday. I was given instructions to remove anti-virus software (which was preventing installation), and I was also told that iTunes and my keyboard may cause issues upon upgrade. I figured this just meant that they might not perform as well, so I ignored it and continued with the upgrade.

The first time I booted up Windows 7, I got a BSOD within seconds after my desktop loaded completely. Sometimes I will get a few minutes (one time, I even got about an hour or so) before the BSOD hits. I was able to uninstall iTunes, and run Blue Screen Viewer. Blue Screen Viewer told me that it was likely that my ntoskrnl.exe was causing the problem. After researching ntoskrnl.exe, I found out that it is sometimes caused by keyboard driver issues, but I can't be sure that is the problem.

If anyone thinks it will help, I can post the exact text of my BSOD. However, since I was unsure if I needed to do so, I opted to include the mini-dump files for now. I can also say that the BSOD always includes the text "SYSTEM_SERVICE_EXCEPTION."

I wo... Read more

5 more replies
Answer Match 55.86%
A:Mini Dump error plz help automatic restart in windows 8!

No Windows Updates installed. Most systems have at least 30 or 40. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions). I strongly suspect that this hold true for Win8 systems also.





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disc-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help



The memory dump blames your Avast antivirus. Please:
- download a fresh copy of the latest version of Avast
- uninstall your current copy of Avast
- install the freshly downloaded copy of Avast
- IMMEDIATELY update it and perform a full system scan
- continue to monitor for further BSOD's

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rena... Read more

1 more replies
Answer Match 55.86%

I was playing my "Desperate Housewives" PC Game, and I haven't had any problems until a couple of hours ago, a screen about minidump files came up.

It says exactly this: An Unhandled Exception has occurred. A minidump file has been saved to `C:\Program Files (x86)\Buena Vista Games\Desperate Housewives\DH 0.02.1265 07.29.2010 4.52.24

I deleted the file, but I'm not sure If that is how I fix the problem.
My computer is the: Dell Inspiron 1545 with the standard 250 gb hard drive. I just got it this month, And I haven't had any problems with it.

Can anyone tell me how to get my game working again? & If I have to uninstall it, how I can keep my saved games on my computer.

Additional Info:
It keeps crashing at the same part, and it hasn't crashed at any other part.
I use windows 7
This is the link to the details of my laptop:
http://www.dell.com/content/product...1545?c=us&l=en&s=corp&~tab=specstab&~lt=popup

I didn't add anything extra to my laptop so this is a good way to summarize it.
 

A:Mini Dump Files During Desperate Housewives Game?

6 more replies
Answer Match 55.86%

Hi, I am hoping someone here can help me. I have search through these forms and have found similar issues but not the exact errors i am getting..Yesterday, i noticed my PC (win xp pro sp2) just locking up for no reason at all.. I had to shutoff and restart....Later in the day, i went to turn on yahoo msgr and the entire computer just rebooted.....This morning i turned on my PC and i received the following msg when i booted the PC up.When i click the view technical info regarding this.. I get thisI cannot get system restore to work, i get to the 2nd screen after choosing a restore point, click next and just hangs there.....i have tried this in safe mode and in safe mode w/ cmd prompt.I also tried to defrag the drive and it said "defrag could not start".....I did get some junk on my PC the other day when the problem started, but i have since ran hijackthis and removed any bad items as well as running antivirus and removing a few small things....I have used combofix twice in last few yrs to correct problems, maybe that would help again???Anyone have any suggestions for me to correct this?Thanks in advance!-max

A:Mini Dump Issue, Error Messages At Boot

Hello maximumrock,ComboFix should not to be discussed outside the HijackThis forums and then only when requested by a HJT Team member. It is an extremely powerful tool which should only be used when instructed to do so by someone who has been properly trained. ComboFix is intended by its creator to be "used under the guidance and supervision of an expert", NOT for private use. Please read Combofix's Disclaimer. Using this tool incorrectly could lead to disastrous problems with your operating system such as preventing it from ever starting again. Please create a new topic explaining the nature of your problem in the Am I infected? What do I do? forum. Describe pop-ups and system tray or desktop icons that have appeared. Explain what is "going wrong" with your computer. Note any tools you have used and their respective results.If needed, we will direct you to our HJT Preparation Guide.Thank you for using BleepingComputer as your malware removal source.This topic is now closed. If you have any questions, please PM me or another Moderator. The BC Staff

1 more replies
Answer Match 55.86%

I'm not sure what is going on but when I am working in Word 2010, after a little bit it will go to a blue screen and my computer will completely reboot and my computer refers to the rebooting as a mini dump. I have uninstalled and reinstalled Microsoft Office and that stopped my problem for a couple months but now its doing it again. Please help!
 

A:Blue Screen followed by a mini dump while using Word 2010.

11 more replies
Answer Match 55.86%

My windows XP pro won't boot, has a stop 21a BSOD, I've tried chkdsk/f at the recovery console and a manual system restore of the registry, I slaved the hard drive to another workstation and see a folder (found.000) with *.chk files within it, so I know the hard drive has crashed, I restored the chk files (3 of them) and still stop21a BSOD.
I searched around the hard drive for dump files (*.dmp) but there are none, my goal is to get the OS up and running and then clone the image to a new hard drive.
My question is, is there a way I can create a mini dump file so I can get a more detailed error on what's going on ?
I can access the registry when slaved to another workstation and all my data is retrievable, I just don't want to rebuild since there are some odd ball programs installed.
Note: I can not boot in to safe mode or any other mode including last know good configuration.

Please help guys.
 

A:Windows XP won't boot-How to create mini dump file ?

11 more replies
Answer Match 55.86%

Hi Guys.. Im Wondering if you can help me i have a brand new computer Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz 4g ram ATI Radeon HD 4550( which i think is causing the problem) Naturally the BSOD happens when im playing games then bunch lines go through the screen , and a repeated noise.. usually saying SYSTEM_EXPECTION or SPECIAL_MEMORY_POOL and recently IRQL Something... Sometimes While Im Playing the monitor acts like if it was idle saying Not Supported.. And I can Hear and talk to my friends on skype still but the monitor not working... i get alot of display driver stopped responding.. and these are the lastest minidmp files i have 091011-14578-01.dmp , 090911-19625-01.dmp , 090911-14796-01.dmp , 090911-13609-01.dmp , 090911-13453-01.dmp, 090811-23359-01.dmp , 090811-20718-01.dmp , 090811-19406-01.dmp.. ECT , theres a total of 50 minidump files i just grabbed the first 8 .. also guys after it crashes i usually start a game back up and play with my friends until it crashes again.. is that back for my pc :X Thanks Your Awnsers Are appreciated!!

A:BSOD- Memory.dmp (Driver Conflicts?) Mini-Dump

  
Quote: Originally Posted by Dynamics


Hi Guys.. Im Wondering if you can help me i have a brand new computer Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz 4g ram ATI Radeon HD 4550( which i think is causing the problem) Naturally the BSOD happens when im playing games then bunch lines go through the screen , and a repeated noise.. usually saying SYSTEM_EXPECTION or SPECIAL_MEMORY_POOL and recently IRQL Something... Sometimes While Im Playing the monitor acts like if it was idle saying Not Supported.. And I can Hear and talk to my friends on skype still but the monitor not working... i get alot of display driver stopped responding.. and these are the lastest minidmp files i have 091011-14578-01.dmp , 090911-19625-01.dmp , 090911-14796-01.dmp , 090911-13609-01.dmp , 090911-13453-01.dmp, 090811-23359-01.dmp , 090811-20718-01.dmp , 090811-19406-01.dmp.. ECT , theres a total of 50 minidump files i just grabbed the first 8 .. also guys after it crashes i usually start a game back up and play with my friends until it crashes again.. is that back for my pc :X Thanks Your Awnsers Are appreciated!!


We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your &qu... Read more

9 more replies
Answer Match 55.86%

Hello,
I need help. I got a new PC 2 months ago, Its and HP on win 7 home premium. I7 with 12gb of ram. 2 weeks ago, I have started to get the blue screen error

Driver_IRQL_not_less_or_equal

tcpip.sys.

I am attaching the mini dump file. Please let me know what I can do to fix this issue.

Thank you!!!!

A:Blue Screen Error. Please help. Mini Dump attached

Try stopping the tcpip service by going to Start> type in services.msc locate tcpip and stopping it. Try this in safe mode.

Also in safe mode with your Windows 7 disk

Go to command prompt (Run as Administrator) type in

SFC /SCANNOW.

4 more replies