Tech Problem Aggregator

# Unprotecting a form template after it has been completed

Q: Unprotecting a form template after it has been completed

I have a Word 2007 form template that is locked so that the users can fill in the forms, but there are several areas of the form where the user can input addresses and they will need to copy these addresses after the form is filled out in order to make mailing labels, so I need some code or a macro to unprotect the form so that they can copy the addresses. I don't want to show them how to manually unlock forms because some of them can get pretty creative and I don't want them changing the ORIGINAL form template.

More replies

I'm creating a credit application template to be used by sales people. Part of this document will utilize a mail merge from an ACT! database to populate data, but some information will need to be entered manually.

My problem:

What I'd like to do is have the Tab key cycle through, stopping at each field requiring manual entry. ACT! calls these Tab Stops.

I'm not at all literate with Macros or using the VB Editor - the only way I've see so far to do this, but I'm not sure how to properly apply these.

Any help would be greatly appreciated.

A:Form/Template help with Word

No can do, Ruefus. You'll need a fairly extensive amount of VBA to accomplish this task. Here's why:

1. If you mail merge a document with form fields, the form fields are wiped out.
2. If you have to add form fields to the document AFTER mail merge, that's some pretty hefty automation.

I'm not saying it cannot be done, but you'd be better off to export the data from ACT to a CSV or something. Open the data in Excel. Answer the "questions" manually there, and THEN do the mail merge.

What I never understand about this request is why does some information need to be entered manually? I'd love to have the answer to that.

3 more replies

I'm having difficulty with text fields in a word template. There are 3 columns toward the bottom of the document with app 7 different selections in each column. After selecting a check box and tabbing over to the text box, you can type app 7 letters and the selection in the next column jumps out of line with the ones above it. I would be happy to email to someone if you would be so kind to take a look.

Joe

A:Word form template

Ok go ahead and email me at duluvian at verizon dot net and I will take a look at it. Please reply here telling me that you sent it so I can check that email.

1 more replies

I need to create a spreadsheet for a club that tracks and sorts three different categories of dues and donations, with a column to indicate whether it was paid by cash or check and a column for check number. I need to have the months of the year, across the top of the document, and the names of the members in a column down the left side of the page. Also I'd like to be able to sort each field and be able to print it.

I've never created a spreadsheet so I'm not sure if Word, Excel, or another program would be better to use if I cannot get my hands on a template. Any advice/tips will be greatly appreciated.

A:Help creating a form or finding a template

It may help in searching to know the version of Excel, or Office. Google Search found several sites that should, some Microsoft Office and some others.

2 more replies

I'm trying to set up a template that can be used with preprinted forms. I would like to be able to tab from field to field and fill out the information, such as in Word. However, I want to be able to print the info on existing forms.

I know how to scan the form into an application such as Word or Acrobat and create a template, but I want to print ONLY the information that has been filled in, NOT the image of the actual form itself.

Does anyone know how to do this??

Thanks!

A:Setting up a printable form template

Hi Overbydt,

here's 1 way:

You'll need a scanned image of your paper form.

What you should do is overlay the scanned image onto your Excel Template form and then set it to Transparent and not to be printed.

a. To set the transparency, the way that seems to work is to right click the image and select Show Picture Toolbar, then pick the penultimate tool icon (Set Tranparent Colour) and click it over your image.
You should now be able to see whats sitting in your cells beneath the image.

b. From the Show Picture Toolbar, now select the Format Picture icon and Properties tab, then clear the Print Objext box.
You will need to create the form as normal i.e with unlocked fields and a protected spreadsheet so that users can only tab and enter into the unlocked fields, which should match with the white-space boxes on your form image.

lol

Hew

3 more replies

Good morning,
I've been doing some research and can't seem to find an answer. I want to create an email template/form in Outlook 2003 but I want to have placeholders, or fill-in boxes, when I select this template. I send out a specific email nearly every day, where only a few sections change, and instead of typing the entire thing every day or just modifying a previously sent email, I would like to be able to open this template, fill in the spots, and hit send. Just for example, in the subject line when the template opens, I would like it to say "Good afternoon, [Name], today is [Date]." When [Name] or [Date] is clicked on, it turns into a slot you can fill in. Is there any way to make this happen? Preferrably without going into VBA Thanks in advance!
Reyn

A:Create an email template/form

Open a new message, type the contents you want in there, then within the message window, click "Save As" (instead of "Send"), and click the drop-down for file type, and choose the one for "Template", then give it a name and location (such as your desktop), then click "Save".

Now, you just need to go to your desktop and click the template file, make a few changes, then click to send the message.

1 more replies

Hello Everyone!

I recently created a simple Word 2003 memo form and saved it as a template for others to use in my office. The top section of the form is protected so that the formatting cannot be changed, but the second section is not protected so that the user can type whatever they want and even format however they want. To my surprise, one of the users called me up and told me that he was trying to insert a footnote in the memo and the footnote option was grayed out, so I tested it myself and sure enough, I couldn't insert a footnote in the form. Am I missing something here? Why would such a simple option not work in a form? Can someone tell me if there is another way to create a form in which you CAN insert a footnote, otherwise, I am going to have to create a template with a dynamic dialog box, which requires a lot of coding, for such a simple form. Thanks in advance for any help.

More replies

Hi - I have created an outlook template/form for about 300 users and saved it is as
"Outlook Message Format" & also tried saving as an "Outlook Template". I have tried running this template on a few pcs with the exact same Outlook version and settings, but the template opens up blank - All that is visible is the To and Subject fields. The template does open correctly on a few pcs.

Any idea what could cause the template/form to open up blank?

More replies

I have converted some of my old (Word 2003) form templates. Since the old auto text routine (just start typing and hit enter when it pops up) doesn't work I am trying to use the Building Block Gallery (Auto Text) in place of one of my legacy text boxes. Everything works when I am working on the actual Word 2007 template until I re-enable the protection. At this point the Building Block Gallery drop down goes inactive. I am at a loss and any help will be greatly appreciated. thanx b

More replies

Can you help me with this problem?

When I create a Custom Template Order Form in MS WORD, if you hit the ENTER KEY (carriage return key), it adds an extra line of space to my form, making it longer than needed. If you continue to use the Enter Key, you can add infinite number of additional lines of space to the form which is exactly what I don't need. My template takes up the entire 8 1/2 x 11 form that I have designed and I want the form to remain no larger than 8 1/2 x 11 even after the form is filled out by the recipient.

Is there a way to disable the Enter Key from this form? The Tab Key is used to tab from field to field.

Your help would be sincerely appreciated.

Thanks,
Joey

A:Problem with Custom Template Form in MS Word

Place your form fields into tables.
Set the height of the table row to EXACTLY. Then, they can type all day long, but the text will just disappear below the visible part of the table row.

Form fields also have character limitations.

The only way to disable the Enter key is to use macro code. If macros aren't enabled, this solution won't work anyway. The above is the best workaround.

2 more replies

Hi all,

I started using the Expense Report Template for my employees expenses. I am entering all their expenses through the expense report detail form for each month. However, my employees receive a cash advance at the beginning of the year for their expense purposes. I tried using the "Less Cash Advance" field, however my total expenses come out negative, as well as it does not automatically update month to month.

Thus my question is, how can I change that form or field to automatically keep track of their declining cash balance for the entries for each month?

I thought about adding another field to the "Employee" table for each of their respective amounts, however to get it automatically updated after each sequential entry is where I'm really in the dark on.

Thanks for the help in advance! cheers....

A:Access '07 Question - Modifying Template Form

From the template I have I can see their is an expenseBalance in the expense report table. I would change the the data type for this field to Currency and enter the starting balance here. I would create another table showing the interim advances and expenses for each employee. And then build a query that links the two tables and add a calculated field which would provide the running balance. You can then generate reports off this query.

3 more replies

Hi,
Im trying to set up an outlook account after reinstalling my computer. I backed up all my data and outlook files.
before i had a email header / template form that every new message would automatically use and when i replied to emails.

looked like this..

[img=http://s14.postimage.org/cc08grm0t/email.jpg]

how to i set this up again? I have an .oft file with it in

many thanks

Spud

More replies

Hi

I have been posting this question all over the place but nobody seems to be able to help, so this is my last effort.

I have a new form template that I want to unlock after the form fields have been entered. I put a macro in the last field to trigger the unlocking of the form, but once the form is unlocked, the data that the user entered disappears. How can I unlock the form and keep the data that the user entered? With the code that I have below it is not working.

If ProtectionType <> wdNoProtection Then
ActiveDocument.Protect wdAllowOnlyFormFields, True
End If

More replies

Hello y'all - hope someone can help

I created a user-form in adobe acrobat using an existing Excel spread. I am new to Adobe and could use some help. The form seems to be working all right except for a couple of issues I can't seem to resolve??

The adobe file is a 3 page document; page 1 is a text / financial data mix, page 2 is all the financial data (some of which feeds to page 1), and page three is just text. Here are the issues:

1. MUST HAVE: Page 2 - Financials: My "C" field will not auto calculate unless field "E" is completed with an amount greater than $1. This is usually zero but for a few exceptions, so this is a problem. 2. LIKE TO HAVE: Page 1 - When completing page 1's 'CLASS' field, upon entering data in this field, can I have the cursor 'go-to' the 1st field on page 2 and skip over the signature section on the bottom of page 2? More replies Answer Match 53.34% me and my friend recorded a song on our guitars onto a disc, i loaded it up to my computer, it works fine in wmp. i want to upload it to myspace like onto a band profile (the myspace music files have to be mp3) but its a WMA, its protected, all the mp3 converters, dont work unless the files arent protected, but my one is, so i guess i need to un protect it, then convert it. how can i do that? plz help A:unprotecting WMA files. Help! In your case, the easiest way could be to burn the song as a track on an audio CD & from there rip it in a more user friendly format. 8 more replies Answer Match 52.08% Hey I've just got a .pdf file that I need to print but it is protected and I can not print it at all, but I can open the file but print option is dimmed. Any way out for how to remove the protection it to be able to print it? Thanks A:Unprotecting protected .pdf to print the file Hi MGadAllah, and welcome to TSG. The creator of the PDF file most likely set the document's password protected security options to not allow printing. Contact you source of the PDF file and request a version that permits printing. That is about all of the assistance you will get for your particular problem around here. The site rules prohibit any kind of hacking or password circumvention techniques. 2 more replies Answer Match 52.08% I'm written a complex application using VBA in Excel and I need to make sure that it's protected. I writtten the code so that when the document opens the entire workbook is protected. I've created a toolbar with butttons that access individual user forms with various data input areas. What I need to do is have document unprotected when the user clicks on the toolbar button and then reprotected when the user either clicks the "OK" button OR clicks the "X" in the corner of the window to close the userform for each of the five buttons I've created. Any suggestions as to how to do this? Thanks, Jill A:Protecting and Unprotecting Excel worksheets 8 more replies Answer Match 51.24% I have a laptop with Vista Home. An old version of quickbooks, no longer used was there, and the control panel uninstaller could not remove it so I deleted all the files but a few, which seem to be protected. How do I remove the protection, so they can be gone. Also the machine has become slow, and one scanner claims I have 1224 registry errors. Where i the windows cleanup system accessed from? A:[SOLVED] Regsitry clean up, and unprotecting files Hi first ignore the scanner errors they are usually bogus and meant to make you buy the product, run system restore if you used and reg cleaners and set things back as they where,then try revo uninstaller the free version is usually good enough for most things but you can if needed use the pro trial and hunter mode Revo Uninstaller Pro - How To or use the forced uninstall feature on the system as it is Revo Uninstaller Features - Uninstall and Remove Programs, delete junk files 8 more replies Answer Match 50.82% Hi, I have a .dot template containing vba that i would like to use for new documents. However, as soon as I rename or relocate this template, any document that I have previously created from it loses all inherited vba. I was under the impression all elements of a template (such as vba) were meant to be passed on (embedded into) to the new document at creation, instead of just the template passing its own path/folder reference so that the new document can be directed back to the template to read the vba when required. As the documents created from this template will be distributed to various computers which may not even have a local copy of the template, this is a big issue. I am using Word 2003. Thanks for your help. More replies Answer Match 50.4% ...will the document update automatically? A:Word 2013: If I add a template to a document then update the template Do you mean if you created a new document from a template. Your very brief question is not very clear. If you created a new document from a stored template then altering the template will not alter the document. A template is a stored base design that you have stored for future use, so that it can be used to create a new document with the same format. Once that new document has been created & saved it is no longer connected to the template. 1 more replies Answer Match 42.42% Hi All, Noob first-time poster I'm afraid! I'm new to Access 2007 (but have used 2003 & 2000 reasonably extensively). I'm building an App and have created all the necessary tables, as well as creating the relationships in the Database Tools area (which I know are correct - I'm a SQL Server DBA in my day job)! Anyway, it's an almost text book example of an employers and employees database; one employer having many employees (employerID is the foreign key on the employee table). I have created an employer form (using the wizard) which is fine, but then when I add a button to open the employee form (selecting 'Open the form and find specific records', matching employerID on the Employer table with EmployerID on the Employee table) it doesnt work. Instead, I get a popup box asking me for the EmployerID! Even if I manually enter the correct employerID when the popup box appears it actually displays all records, so I'm sure that the problem is more fundamental (and therefore, probably my fault)! I'm hoping that I've just overlooked something REALLY stupid, but would apprecaite any suggestions! Cheers, Ian. A:Access 2007 Form Button Wizard - Form does not open with the correct records I have seen this kind of problem with Access 2007 VBA code which does not work when it dod in 2000-2003. It can be a Syntax problem which you may be able to get around, if not you can get around the problem bby using a Criteria in the Query that supplies the Employee Form. Although I would have thought it would be better design wise to have the Employees as a Subform or Tabbed Subform on your Employer Mainform. I do not have Access 2007, only 2003 so I can't help with the VBA, but you could post the code anyway. Did you use a Wizard to create the Employee Form, if so check the Record Source SQL it may be preventing your EmployerID from working. 1 more replies Answer Match 42.42% Hi all I have a simple Access (2003) db which has a single form view with a subform. The main form is a record based upon a physical case file the subform only details actions past and future, a sort of event log. I also have a continuous form which displays all upcoming actions sorted by date on all cases for a particular user so they can see just how busy they are likely to be for a particular period. What I would like to do is have an on click() property for the detail of the continuous form so that it opens the main form filtered by the record in the continuous form that was clicked. User can then update or add new events for that case before closing form and returning to the continuous form Hope this makes sense A:MS access open single form filtered by selected record in continuous form coasterman, welcome to the Forum. It makes perfect sense. If you add a Command Button to the Continuous Form and after selecting the mainform select the "Open the Form and find specific data to display". This will give you the code that you need to add to your On Click or On Double Click property or of course leave the button and use that. 2 more replies Answer Match 42.42% I sent to look at my Sent Items tonight and to my surprise I saw another email apparently sent yesterday that I definitely didn't send. I was astonished to find this as I have just upgraded to Vista in the last 2 days and have sent minimal emails. The subject is "Form posted from Microsoft Internet Explorer." & is sent to a Hotmail account. The attachment is a POSTDATA.ATT. When I look at this file in txt format it has info such as one of my email addresses, my website & description - as if I had filled out a web form & pressed Submit. Now, thinking about it, shouldn't IE let you know that it is about to send data? One strange thing is that the email is dated yesterday evening in the Sent list, but when I open the email to view it, it will always have the current date & time - seemingly from the Windows clock. I am thinking that either 1) this is due to a bug in the new IE & yesterday I visited a website which submitted data via email without my knowledge or 2) this email is an old email that I Imported from backed up email (PST format) from a form I ACTUALLY sent that Internet Mail has redated - maybe something went Sorry for the long post but I'm just wary, hope it makes sense! I was liking Windows Vista so far! A:Sent Items: Form posted from Microsoft Internet Explorer. - I didnt submit any form! I have moved this to vista forum as I believe it is more likely to be a vista live mail issue 3 more replies Answer Match 42.42% Hello, thanks for taking a look at this thread, any help will be greatly appreciated by a complete Noob. I've been given a LOT of help by members of this Forum (especially OBP) with a DB I'm making as a first look at any type of IT product, and I'm very grateful, so thank you all. Recently, I was advised to take a look at the "Tabbed" style of "MainForm" instead of the "Switchboard" style I originally used. I must say, I really like the tabbed style much more than the switchboard but I've hit one hurdle that I can't seem to overcome. In the Switchboard style, I was able to set a form to load in either DATA ENTRY = YES or DATA ENTRY = NO mode depending on which sub-switchboard the user selected. For example, I had a ENTER NEW sub-switchboard that all forms would open in DATA ENTRY = YES mode & I had another EDIT EXISTING sub-switchboard that all forms would open in DATA ENTRY = NO mode. However, with the new tabbed style, I cannot set the form load type for separate tabbs, it will only accept the LAST type as the GLOBAL type. Example, on the ENTER NEW tab, I set the form to load as DATA ENTRY = YES & sets the form to open in DATA ENTRY = YES on both tabs, then I go to the EDIT EXISTING tab & set the same form to DATA ENTRY = NO & it sets the form to open in both tabs in DATA ENTRY = NO mode. So, my question is: Can I set the same form to load differently on different tabs on the same MainForm? If so, w... Read more A:Solved: MS Access - Tabbed MainForm - How to make a form open a form in multiple mode I would just copy the Subform, so you have version 1 for data entry with the Data Entry set to "Yes" and version 2 set to "No". The only thing you need to do then is to Requery the Editing form each time you make an entry in the data entry form. Although I prefer to just have an Edit form with a "New Record" button for the data entry. 2 more replies Answer Match 42.42% My multi item form isn't letting me add new records, only update and delete current ones. My guess it that this is because the form is based on a multi-table query. That's fine, I can make a new form specifically for adding new records, but I'd like to be able to salvage this form if possible. Is there any way to either force this form to accept new records in the bottom row, or is there any way to get rid of the "add record" bottom row completely so it's not misleading users into thinking they can add records here? Thanks in advance. A:Solved: Access 2007 - multi item form (continuous form) trouble adding records 16 more replies Answer Match 42.42% Hi All, I need some help to figure out how to do a project. i was given a sample tax form from the government that i have to re-create in electronic format. I have to build the form to match their specifications exactly. I've tried to do it in MS Word 2003 using a table, but the when i try to ensure that the tables cells are the same size as that on the paper - the tables keeps either changing the dimensions of the cell or changing the dimensions of other table cells. the major thing is to ensure that the form i build matched that paper sample exactly - for example i cannot be off by even a millimetre. In addition to that, my company has extracted the tax data for its 400-500 employees into an Excel Spreadsheet. I have to use the excel spreadsheet to make the "form" i created fillable. The previos analyst used ms word 2003 and created the form using the drawing menu and text boxes and then mail merged the info in the excel sheet to the word doc. can someone suggest an easier to do this? i wold be grateful for any help i can get. Regards, Ariane A:Create Electronic Form to match sample paper form Ariane, Welcome to TSG If I got your meaning correctly, then yes, ther's an easier way. I'm almost sure that you can create the form in Excel, though setting the exact sizes and positions could be difficult. I'm absolutely sure that you can create the form in Powerpoint, and with this latter, setting the exact sizes and positions should be much more simple. Automatically filling the Powerpoint form is also possible. If you only need to print out the filled forms, or create PDF-s, this Powerpoint-Excel duo might be good for you. If you need to do further calculations with the filled forms, then I strongly recommend to stick with Excel. I'm also curious what others can say. 2 more replies Answer Match 42.42% Hello I have a subform which on its own - works beautifully but fails under the mainform. I use a main form to select the record that the end user wants to update. Upon update event on main form, the sub form opens, presenting fields for possible updating. The Sub Form also present 2 buttons - Save & Close or Cancel and Close (Undo). When the main form opens, the code set AllowClose as False. When the sub form is opened as a result of the update on the mainform, the issue is the Close command /code gets canceled. (Error 2501). I have tried: 1. setting AllowClose (true and False) on both forms, 2. only the main form and 3. only the subform. None of these 3 configurations resolves the issue. Also, I tried moving the buttons to the mainform instead of the sub form but that failed as well. The application has a dozen forms and all of them utilize AllowClose functionality so the end user MUST use the buttons on the forms to force background queries (updates, deletes, perform calculations, recalc control totals etc). This is the first time I have tried to use Allow Close on a subform with buttons. XP and Access 2007 KEY ELEMENTS OF THE CODE: Private AllowClose As Boolean Private Sub Form_Load() AllowClose = False End Sub Private Sub Form_Unload(Cancel As Integer) Cancel = Not AllowClose End Sub Private Sub SaveChangeandCloseForm_Click() AllowClose = True DoCmd.Close Private Sub CancelAddingNewRecord_Click() If Me.Dirty Then Me.Undo End If If Not Me.NewRecord Then En... Read more A:Action Canceled - Using AllowClose on Form and Sub Form - Access 2007 Why not just use a listbox to display the records based on the selection on the main form? I don't think you can actually close a sub-form on a main form since it is tied to the main form. 2 more replies Answer Match 42.42% I have a database which ultimately will have a couple of thousand records. The primary table has 30+ fields. I have lots of queries and connected reports to show various subsets of the data needed from the table. However, there are times when what is needed is all fields for a specific subset. Because the records sought often need to be filtered by several criteria, I've found the "Filter by Form" option to work well. I have a button on the main dashboard marked "Find Record" that automatically opens a search form in the "Filter by Form" mode. This allows me to enter information into as many controls as necessary, and returns exactly the right records after clicking on "Toggle Filters" on the ribbon. The problem is that ultimately I need to make this "Access-free". The goal is to create an application from the database without ribbons. I've created a button to run the filter, and another one to print the results, but when the search form is open in the "Filter by Form" mode, it greys out the buttons. I understand that there is a GotFocus command or something similar. Can anyone help with specifics, both the syntax of the command and where the command needs to be typed? Thanks a bunch...I look forward to your reply. More replies Answer Match 42% I am a new user to Access 2010. My operation system is Window 7. I have created a data base with two tables. The first table contains a list of students and their personal information. The second table contains student subjects and has many subject records with a relationship to the student record. The relationship key is the student id. I have created a form that populates with the student information and contains a subform that populates with that students subjects. All of this works great for existing students. I can edit the student information and and new subject records. Now here is my problem. I would like to create a form that preceeds my current form. The user would input a student number and click search button. If that student number exists on the student data base then the form that I created should open populated with the student data and their subjects and allow the user to update it. If the student number does not exist, then I would like that same form (or a form with the same layout) to open and the only data populated is the student number that was input on the search form. The user should be able to input all of the student data and course information and hit a save button that would insert the records into the correct database tables. I have tried many methods to create the intitial search form that would open the correct version of the student form without any progress. Could someone provide me with the macro that would open that correct form, or set t... Read more A:Access query to open Add form or Edit Form needaccesshelp, welcome to the Forum. First a couple of points, you do not need to "save" the record, access does so automatically. Also when creating a New record the subform should be automatically populated with the Student Number, this is controlled by the master child links. The combo you need is a Find combo which can be created using the combo wizard, that combo can have it's Not In List Property set to yes, which can then be used to trigger adding the student that to the table and then to the form (and combo). 1 more replies Answer Match 42% Here is what I'm trying to do. For lists Equipment in drop down box. Whatever equipment that is select, the equipment type field needs to be updated from a table. Is there a way to get a value from SQL statement? SQL = "SELECT [Equipment Type] FROM OrderDetails Where " _ & " Equipment = '" & Me.Equipment & "'" [Forms]![OrderDetails]![Equipment Type] = SQL A:Help with access form (insert table value into form field) Mhouser, if you are trying to "display" a value related to the Combo selection you can have thta value as an extra column in the combo and refer to it with simple VBA. You should not populate a Field's actual value with that from the combo as that is duplication. Can you tell me which one you are trying to do? 3 more replies Answer Match 42% I have this small database I am converting from A97 toA2010. I created a new A2010 db and pulled over objects I needed. Everything is tested out and working fine. I also added a drop down box to the main switchboard toselect a "user". Its purposeis so the filter through all the records and pull up only the list of drawing #for that specific drafter. So I have a table called tblSign_In which has UID autonumber, and the employees name. Thiswill be the user names for the drop down of the Main Switchboard. I have a table called SHEET LIST that list all the data Ineed to display. This will end upholding tens of thousands of records of information about drawing. I added to this table a field called theLogInID field (UID) to link back to the tblSign_IN, and the correct number andcombination. I also have a query called qrySHEET LIST which selectsall SHEET TABLE and inner joins to thetblSign_IN to pull the Employee Name linking on a LogInID field. What I was trying to do is filter SHEET LIST form (my outputform) by the user selected on the MAIN SWITCH form in the drop down box Icalled cboSignInEmployeeName. For example: Sheet List (tbl) might contain information like: Sheet# 22a6; description Dryer; buildhours:12; drafter #4. qrySHEET LIST (also my ouptut data) is pulling all theabove, but replace 4 with actual drafter’s name, John Smith. To filter, I have two methods: The query is my record source for my form SHEET LIST, so Iadded WHERE (((tblSIGN_IN.[Employee Name... Read more A:Filtering a form using selection of a combo box on a another form (user ID) 13 more replies Answer Match 41.16% I have my form sending to my e-mail so it prints out my data line by line. Can anyone give me some pointers on how to get this data into a nice form that can easily be read. E-mail from From Looks like this. jnum=12345 jtitle=blah fname=nick mi=d lname=johnson ssn=1234 [email protected] oname= address=123321 A:Form to E-mail back to a Viewable Form 6 more replies Answer Match 41.16% I inherited this Excel document and have been asked to modify it so that when a selection is made from a drop down list a Form pops up for them to enter the reason. I put this code into Private Sub Worksheet_Change(ByVal Target As Range) If Len(Trim(Range("$H$" & Target.Row).Value)) = False Then Exit Sub Else If Len(Trim(Range("$H\$" & Target.Row).Value)) <> "" Then
ProcessReasonForm.Show vbModeless
End If
End If

Which worked fine on three machines that I tested it on locally. However in the 2 remote location there it was tested it the Form would pop upwhen ever any changes were made to the spreadsheet. I need the form to only come up when a selection from the dropdown list in column H is made. As no personal data is in it I'll post a copy with this. To view code use "amber". Any ideas would be great as I'm lost as to why it's happening out there but I cant recreate it.

Thanks
WT

A:Solved: Form call is causing the Form to pop up everywhere!

File is attached. Code to unlock code is amber.

2 more replies

Actually, it makes sense because it's in the middle of the form where the cursor is sitting and the user will first enter their data. But first they need to read the instructions at the top of the form.

Is there a way to set it to load the page scrolled to the top rather than to the middle where the data is to be entered?

Thanks, Peter

More replies

Hi all.
I have a form word document that looks ok when viewed but when printed there are the words "formdropdown' in areasthat should contain names, addreses, etc.
Running XP Pro.
Having the same prob with other forms.

Thanks

Thee

A:Word Form Doc Printing Crap Instead Of Form.

?

3 more replies

Unable to convert Word form to Excel form. Tried screenshot of Word form, pasted to Excel sheet and filled-up by text but the text itself always mis-arrange.Kindly help me please...

A:Convert Word form to Excel form

Rather my cherry picking and copying a few how to... suggest you follow the results here:http://tinyurl.com/zxfccfrIt's a google list found using:convert excel document to wordas the search term...

2 more replies

Hi all. I have different table for each type of inventory that we have. I would like to design one master form that would ask what type of inventory that the user would like to enter. Depending upon what the user selects, it will change the fields to the categories in the pertaining table. Is this possible?

A:using a form field to select display of a form

12 more replies

In access, I have a field that connect to a popup form for selection and after selecting the data required, the data did not print in the field. How can I have the data in the popup form to be printed in the field.

A:Transfer data from a form to another form

aattas, welcome to the Forum.
Can you explain a bit more about what you are trying to do and why you are using a pop up form?

3 more replies

I have a 256 meg mp3 player can anyone sudjest a program where i can convert the songs from cds to mp3 form , i foiund some but it can only convert 5 song from each cd. ( IT NEEDS TO BE FREE ) THANKS!!!!!!!

A:problem converting cda form to mp3 form

perhaps a trial version like this? http://www.audiotool.net/

14 more replies

Hello all,

I am creating a school database, and I'm having trouble with the register students part.
i have the form for new course, and the form for new student. so how do i create a button on the course form so that when i click add new student, the new student forms pops up and is linked to that course.
thanks again!

More replies

Hey I am still having trouble taking info from a form to a printable page. Now I want to take the simple add it up form that I have and transfer all the items they add up and the total to a printable page. Are cookies the way to go. Should I set a cookie and retrieve it, and how do I set a cookie to the javascript that calculates my total?

Here is my add up form.<FORM NAME="MyForm">
P>Size<SELECT NAME="size" SIZE="1" ONCHANGE="totalPrice()">
OPTION VALUE="0" SELECTED="SELECTED">-- Select --/OPTION><OPTION
VALUE="2400">4' x 4'</OPTION><OPTION VALUE="3550">4' x 6'/OPTION><OPTION VALUE="4125">4' x 8'</OPTION><OPTION VALUE-"4700">6' x 6'</OPTION>
OPTION VALUE="6300">8' x 8'</OPTION><OPTION VALUE="7900">8' x 12'</OPTION></SELECT>
/P>
P>Ceiling Height-(at least 8'?)<SELECT NAME="ceiling" SIZE="1" ONCHANGE="totalPrice()">
OPTION VALUE="0" SELECTED="SELECTED">-- Select --/OPTION><OPTION
VALUE="0">Yes</OPTION><OPTION VALUE="0">No</OPTION></SELECT>
/P>
P>Door Hinge <SELECT NAME="hinge" SIZE="1" ONCHANGE="totalPrice()">

A:Its me again Can you set a cookie to any type of form, ie: add it up form

7 more replies

This ought to be pretty simple to do. I have a small table that contains contact information for a number of businesses: name, address, etc. I have an “ID” field that is an auto number and is the PK. I have created another table that contains the business name, date of a donation and a memo field to hold the donation info (since it’s stuff instead of money.) In the second table, “ID” field is also an auto number and is PK. I have related the tables with a one to many: theoretically one business with many possible dates/donations which is the basic premise. I created a main form to input the business data and created a sub-form for the donation data based on their respective tables. Each business will be unique but a business may give multiple donations, say one each month or more – whatever.

I can’t get it to work. I’ve got that big, honkin’ Access 2000 Developer’s Handbook but am still getting up to speed using it…. but I’ll keep looking until I hear from someone!

Thanks.

A:Access 2000 Form/Sub-form

9 more replies

I want to create a form in a sort inbox style so i ahve a list of records at the top in a datasheet and then by clicking on the list the details should show up in colunmar view below.

Sound simple its not.

I can get it to work the other way round by having a datasheet subform in my main form but thats not much use.

What i need to do is to somehow reverse how the form subform relationship works.

Any ideas?

A:Access: Form with subform datasheet. Selecting record on datasheet shows in form.

12 more replies

Hello I found an answer to this question but it was specific to his form. I have several Excel Logs (Tables) that contain information that is also entered into a separate form. Some forms are in excel and some are in word. I would like to hit a button that transfers a row of data to the form so i only have t enter data once. The forms will have additional information that will be entered. The forms are saved as a specific file type and are also printed so the answer that i found on this site may work but it puts the data into a different spread sheet in the same workbook and i need to send the data to a new workbook and in one case to a word doc. Can someone help me out. I have attached a couple examples of what i currently do.

Thanks for the help

A:Solved: Populate Excel Form and Word Form from Excel Table

16 more replies

Model HP 15 notebook PCProduct no. J8B82PA#ACJRam 4gbHard disk 1tb HDDProcessor Intel core i3 1.70 GHzWin does 8.1 64 bit

More replies

Avast seems to find a new malware every 20 min. I could not complete a panda activescan because the update would stall and hang at 19 %

Deckard's System Scanner v20071014.68
Run by Owner on 2008-05-30 21:04:04
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.

-- Last 5 Restore Point(s) --
102: 2008-05-31 01:04:12 UTC - RP583 - Deckard's System Scanner Restore Point
101: 2008-05-30 21:19:31 UTC - RP582 - Restore Operation
100: 2008-05-30 21:12:31 UTC - RP581 - Restore Operation
99: 2008-05-30 21:09:59 UTC - RP580 - Restore Operation
98: 2008-05-30 21:07:03 UTC - RP579 - Restore Operation

-- First Restore Point --
1: 2008-03-02 21:51:33 UTC - RP482 - System Checkpoint

Backed up registry hives.
Performed disk cleanup.

-- HijackThis Clone ------------------------------------------------------------

Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2008-05-30 2111
Platform: Windows XP Service Pack 3 (5.01.2600)
MSIE: Internet Explorer (7.00.6000.16640)
Boot mode: Normal

Running processes:
C:\WINDOWS\system32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe

A:I have completed the 5 steps!

Hi and welcome to TSF.

My name is Iain and I will be helping you clean your system.

Please read these instructions carefully and then print out or copy this page to Notepad in order to assist you when carrying out the fix. You should not have any open browsers or live internet connections when you are following the procedures below.

Note that the fix may take several posts. Please continue to respond to my instructions until I confirm that your logs are clean. Remember that although your symptoms may vanish, this does NOT mean that your system is clean.

If there is anything you don't understand, please ask BEFORE proceeding with the fixes.

Please ensure that you follow the instructions in the order I have them listed.
Do not do anything with this yet!

Reboot
Reboot your system in Safe Mode.Restart the computer. The computer begins processing a set of instructions known as BIOS.
After hearing your computer beep once during startup, but before the Windows icon appears, press F8 (dependent on your system this may be F5 or another key)
Use the arrow key to highlight Safe Mode and press Enter.

SDBot FixRight click the SDFix.zip folder and choose Extract All,
Open the extracted folder and double click RunThis.bat to start the ... Read more

7 more replies

Here is my log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:05:14 PM, on 1/13/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Safe mode with network support

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\drwtsn32.exe
C:\WINDOWS\system32\drwtsn32.exe
C:\WINDOWS\system32\rundll32.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - (no file)
O4 - HKLM\..\Run: [SoundMan] SOUNDMAN.EXE
O4 - HKLM\..\Run: [ATICCC] "C:\Program Files\ATI Technologies\ATI.ACE\CLIStart.exe"

A:Completed 2/5 steps - please look over this and tell me what to do

Hello

I needed you to go all the way through the steps. We prefer a more comprehensive set of logs to assist in detecting any malware that may be present. As noted in the final step (Step 5) of our sticky topic (Updated!) IMPORTANT - Read This Before Posting A Log, download Deckard's System Scanner (DSS) to your Desktop.

What DSS will do:create a new System Restore point in Windows XP and Vista.
clean your Temporary Files, Downloaded Program Files, and Internet Cache Files, and also empty the Recycle Bin on all drives.
check some important areas of your system and produce a report for your analyst to review.
DSS automatically runs HijackThis for you, but it will also install and place a shortcut to HijackThis on your desktop if you do not already have HijackThis installed.

Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on dss.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - main.txt <- this one will be maximized and extra.txt <-this one will be minimized
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of main.txt in your next reply.
To attach a file to a new post, simplyClick the[Manage Attachments] button under Additional Options > Attach Files on the post composition page, and

19 more replies

I have a couple of Word 7 files which can't be moved, deleted or renamed. Any attempt results in a message: This action cannot be completed as it is in use by another program. It is not in use by any program I am aware of. When I open the file, it says (Read Only) in the title bar but the properties dialogue boxes are not checked as read only. Of course, I can't save any changes to the file unless I go to 'save as' but that still leaves me with an undeletable/uneditable file. I am using Vista Ultimate. Any help would be greatly appreciated.
Joan

A:This action cannot be completed...

Unless you're particularly interested in the mechanics of why this might be happening, I'd suggest booting to safe mode (press the F8 key early during Windows startup) and moving or deleting the files from there. You probably won't have trouble deleting the files that way.

37 more replies

Hi,

Having successfully performed a 3 hour chkdsk by means of a downloaded microsoft program which did this automatically, the screen is left hanging and there is no option available to exit from it. I tried switching off and then on again but this just puts me back to the start of the chdsk routine which then completes again. So I'm stuck in a loop from which I can't escape !! What do you recommend ?

A:After chkdsk has completed

Hello ,

here is a shot in the dark

turn your system on & then back off

them push your power button as if you wanted to start it and hold it for a count of 10

this will clear the compleat system of power and maybe reset way your system starts / you may want to reset the bios also by crossing the bios jumpers or just pulling the litheum battery from your mother board for at least 3 minutes

you may be looking at wipeing the driver & reinstalling

have you tried to get into the recovery console useing the Windows XP cd ?

3 more replies

I did not get any replies so will try this again with updated info. Downloaded Microsoft Pocket PC 2002 October 2002 Update(EUU3) to computer but when tried to sync it to handheld got message: "Synchronization Cannot be Completed Successfully" and have not been able to sync since then. Same message and then disconnects. Have reinstalled Activesync twice..even going to older version. Have done disc cleanup and defrag. Have deleted recent programs including the EUU3. Also soft resert on handheld although problem developed in computer before could sync to there. There is no problem in connection of handheld with computer..just will not sync. Any help much appreciated as cannot download or sync any material to handheld(iPAQ3835) at all.
Thanks!!! John

A:Synchronization Cannot be Completed..

6 more replies

Good evening..i have just completed the combofix scan on my Openlabs Neko TSE. Which is my music workstation with a built in computer. Please can you review my log for further advice.? I really appreciate you for this. This workstation is the key to all my productions. I have been freaking out all night. Aloha!

A:completed combofix run

Hello,That request about NOT posting CF logs is primarily to keep people from running the program unsupervised.Please read this topic: http://www.bleepingcomputer.com/forums/t/273628/combofix-usage-questions-help-look-here/ which explains that reasoning further.Please follow the instructions in ==>This Guide<== starting at step 6.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Since you have run ComboFix, please include the ComboFix log in the new topic.If you cannot produce any of the other logs, then please create the new topic anyway, include the information that you were unable to produce the other logs and why and include the ComboFix log along with a description of your computer issues.Orange Blossom

1 more replies

Hi everyone!

Ive just completed my upgrade from an MSI 745 Ulta mobo and ATI Radeon 7000 series 64meg AGP x4 graphics card to an Abit NF7-S mobo and ATI Radeon 9550 AGP x8 256meg graphics card and I gotta say, boy what a difference.

Now I have to save up my pennies to get myself a better processor, I have an AMD Athlon XP Pro 2000 and was wondering what i should replace it with?

There's a fair ammount of choice out there so i was wondering if anyone has any recomendations?

Nice speed jump!
Upgrading always starts with budjet. If you are going to keep your Mb , then simply buy the best (fastest) CPU you can afford at the time.If you are saving pennies you will probably be able to get the quickest cpu your mb can handle.

5 more replies

Deckard's System Scanner v20070804.61
Run by HP_Owner on 2007-08-05 at 16:46:07
Computer is in Normal Mode.
--------------------------------------------------------------------------------

Total Physical Memory: 504 MiB (512 MiB recommended).

-- HijackThis (run as HP_Owner.exe) --------------------------------------------

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:37:16 PM, on 8/5/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16473)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\AppCore\AppSvc32.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\hp\drivers\hplsbwatcher\lsburnwatcher.exe
C:\Program Files\Common Files\AOL\1128887343\ee\AOLSoftware.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe

A:Completed the 5 Steps

Please stay with this thread, and only post here for this problem. Do not start a new thread, otherwise it is too confusing...

Use Post Reply - left bottom corner. Thanks!!

Save it to the Desktop

Double-click combofix.exe to run the program
(Don't click on the window while the program is running, it may cause your system to stall.)

When finished, a log, ComboFix.txt, is produced.

~~~~

19 more replies

I accidentally infected my computer with security toolbar 7.1. I have done the 5 steps and i did not get a log from that first scan but here is the log it gave me on the last one.

Deckard's System Scanner v20071014.68
Run by Alan Hickman on 2007-10-21 13:33:39
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.

-- Last 5 Restore Point(s) --
98: 2007-10-21 18:33:54 UTC - RP572 - Deckard's System Scanner Restore Point
97: 2007-10-21 10:02:26 UTC - RP571 - Software Distribution Service 3.0
96: 2007-10-21 09:56:58 UTC - RP570 - Installed Windows Defender
95: 2007-10-21 09:24:44 UTC - RP569 - Restore Operation
94: 2007-10-20 09:03:00 UTC - RP568 - System Checkpoint

-- First Restore Point --
1: 2007-08-01 05:41:11 UTC - RP475 - System Checkpoint

Backed up registry hives.
Performed disk cleanup.

Total Physical Memory: 504 MiB (512 MiB recommended).

-- HijackThis Clone ------------------------------------------------------------

Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2007-10-21 13:35:50
Platform: Windows XP Service Pack 2 (5.01.2600)
MSIE: Internet Explorer (7.00.6000.16544)
Boot mode: Normal

Running processes:
C:\WINDOWS\system32\smss.exe
C:\WINDOWS\system32\winlogon.exe

A:Completed five steps...here is the log.

Bump!

3 more replies

Finally got my gaming rig built and in perfect working order. Took me a while figure out how to put my two HDD into raid 0. One of the tech support guys at EVGA helped me out and said that HDDs have a hard time going into raid array if they have never been used, which was the case. I just installed some stuff on my two HDDs and reformatted the partition and BOOM it stopped giving me errors, LOL. Anywho here is the finished build:

Cooler Master Cosmos 1000 Silent Gaming Tower
EVGA 750i FTW Motherboard
Intel E8400 Wolfdale Processor
Xigmatek HDT-D1284 120mm Rifle CPU Cooler
MX-2 Thermal Compound
2x2GB OCZ DDR2 1066 5-5-5 18
2xEVGA 8800GTS in SLI
3xSeagate 7200.11 (2 in Raid 0, 1 backup)
Corsair 750TX Power Supply
Samsung DVD-RW w/ Lightscribe SATA
Liteon DVD-RW IDE
4 Scythe KAZE 120mm case fans (1 intake, 3 exhaust)
1 Stock Exaust Fan on HDDs

When I looked at the Case for the first time I couldn't believe how big it was, plenty of room to work in. The Scythe fans sound like a tornado when I first turn on the computer but it gets quite once the bios and PSU start regulating them and you can't notice it when playing games or listening to music. I bought a generic filter for the intake fan and realized that it wasn't needed because the case already comes with filters that you just slide off and wash.

This was my first build ever and I must say I'm quite pleased with the results. The bios defaulted the memory at 800mhz 1.9v so I bump... Read more

A:First Gaming Rig Completed

Cool. Looks like a good build.

7 more replies

Logfile of HijackThis v1.99.0
Scan saved at 16:26:28, on 08/01/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MPFSERVICE.exe
C:\WINDOWS\System32\ScsiAccess.EXE
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Trend Micro\PC-cillin 2002\Tmntsrv.exe
C:\Program Files\Trend Micro\PC-cillin 2002\PCCPFW.exe
C:\Program Files\Thomson\SpeedTouch USB\Dragdiag.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MpfTray.exe
C:\PROGRA~1\mcafee.com\agent\mcagent.exe
C:\Program Files\Trend Micro\PC-cillin 2002\pccguide.exe
C:\Program Files\Trend Micro\PC-cillin 2002\PCCClient.exe
C:\Program Files\Trend Micro\PC-cillin 2002\Pop3trap.exe
C:\WINDOWS\System32\ctfmon.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MpfAgent.exe
C:\Program Files\Kodak\Kodak EasyShare software\bin\EasyShare.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Documents and Settings\David.DAVID-91YJAB3H3\Desktop\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.wanadoo.co.uk/

More replies

Desktop machine.
Windows Vista Home Prem. 32b.

The computer shut itself down a few days ago while it was copying for files.
Then, it behaved abnormally after restart.
A back to the factory status recovery was performed, but it did not complete the task.
The last part of the recovery did not run.
The recovery disks, burned right after the purchase of the machine and used before, were used and they ended the same way.
The last part of the recovery did not run.

There are 3 partitions on the HDD.
Partition 0, 20GB. hidden, keeping the recovery OS.
Partition 1. 223GB. partition C.
Partition 2. 220GB. partition D.

Question:
If partition C is formatted, can recovery OS be installed on partition C ?

Thanks.

A:Recovery can not be completed.

What's the brand name and model name and model number of that desktop?

What's the part/product number and/or service tag number and/or serial number on it?

Which country do you live in?

--------------------------------------------------------

3 more replies

Keep getting the same error over and over, tried many things (inclduing scf /scannow) but to no avail.

Here is the bit from the log:

Code:
1348769 (3424) - winsat\logging.cpp:0815: --- START 2011\10\30 17:15:04 ---
1348769 (3424) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -restart clean -cancelevent 8e00fb41-d1d6-4e88-8347-83b99be94b73
1348769 (3424) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
1348784 (3424) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
1348815 (3424) - winsat\main.cpp:4585: Watch dog system enabled
1348815 (3424) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
1348878 (3424) - winsat\main.cpp:2505: > DWM not running.
1348878 (3424) - winsat\main.cpp:2470: > EMD service will be restored on exit.
1348893 (3424) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
1348893 (3424) - winsat\main.cpp:2793: > power policy saved.
1348909 (3424) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
1348909 (3424) - winsat\main.cpp:2814: > power policy set to maximum.
1349736 (3424) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
1349736 (3424) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
1349736 (3424) - winsat\main.cpp:1775: ... Read more

A:WEI test cannot be completed

What language is your OS currently using, and what was originally installed on it? Is one of the two English?

4 more replies

hey im having problems with installing windows xp SP3 i boot to cd do the whole installation thing for step 1 and then it restarts and then im waiting for the continuation of the installation but it doesnt happen it boots to cd again without me pushing anything

A:Installation not completed

6 more replies

Hi, I have already run Ad-aware using the required settings multiple times and removed everything I can on my own. Ad-aware could not remove iboboi.dll and I believe that is the root of my problem. But on startup that file is gone.

Here is my hijack this log, with the analyzer. Thank you in advance for the help!

===========================================================================================================================
Log was analyzed using HijackThis Analyzer - Updated on 1/7/05

***Security Programs Detected***

C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
O3 - Toolbar: Norton AntiVirus - {42CDD1BF-3FFB-4238-8AD1-7859DF00B1D6} - C:\Program Files\Norton AntiVirus\NavShExt.dll
O4 - HKLM\..\Run: [ccApp] "C:\Program Files\Common Files\Symantec Shared\ccApp.exe"
O4 - HKLM\..\Run: [ccRegVfy] "C:\Program Files\Common Files\Symantec Shared\ccRegVfy.exe"
O23 - Service: Symantec Event Manager - Symantec Corporation - C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
O23 - Service: Symantec Password Validation Service - Symantec Corporation - C:\Program Files\Common Files\Symantec Shared\ccPwdSvc.exe
O23 - Service: Norton AntiVir... Read more

A:Urllogic Pop-ups, completed all prereqs

Let's see if these logs will show us anything:

The Temp folders should be cleaned out periodically as installation programs and hijack programs leave a lot of junk there. Download CleanUp! (Alternate Link if main link don't work) and install it. Do not run it yet.

Before doing anything, MAKE SURE that you can keep your computer on (at least until we get it fixed). This infection requires us to detect and remove it without rebooting or restarting your computer (unless the instructions say so). If you can't keep your computer on today, then I suggest that you don't get the logs yet until you are ready. With that said (when ready):

Open up HijackThis and go to Config->Misc Tools and check the first two boxes there. Now click on the Generate StartupList log button. Post that log in your next post.

Right click on this link and choose Save As...Save it to your Desktop. Make sure you have disabled any programs that may block/disable scripts (ex: Ad-Watch, TeaTimer, Norton, etc.). Double click on Silent Runners to run it. This will take a few minutes. It will create a file called Startup Programs followed by your computer name and current date. Open up that file and post all the contents here in your next post.

Download Find-qoologic. Unzip the files to your Desktop. Open the qoologic folder and run the qoologic.bat file. Wait a few minutes for it to finish. When the dos window disappears, go to your C: drive and open up the log.txt file. Copy and p... Read more

7 more replies

Computer has a very slow startup. I cannot get rid of this Kodak Easyshare. Internet response time a bit faster, page to page.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 05:44, on 2008-03-19Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16608)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Common Files\AOL\ACS\AOLAcsd.exeC:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exeC:\Program Files\Common Files\AOL\1101823440\ee\services\safetyCore\ver210_5_2_1\aolavupd.exeC:\WINDOWS\system32\cisvc.exeC:\Program Files\Google\Common\Google Updater\GoogleUpdaterService.exeC:\WINDOWS\system32\lxczcoms.exeC:\WINDOWS\Explorer.EXEC:\Program Files\mcafee.com\personal firewall\MPFService.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\wanmpsvc.exeC:\WINDOWS\system32\fxssvc.exeC:\WINDOWS\system32\wscntfy.exeC:\WINDOWS\system32\hkcmd.exeC:\Program Files\MUSICMATCH\... Read more

A:All Steps Completed Up To Hijack

Sorry for the delay. If you are still having problems please post a brand new HijackThis log as a reply to this topic. Before posting the log, please make sure you follow all the steps found in this topic:Preparation Guide For Use Before Posting A Hijackthis LogPlease also post the problems you are having.

1 more replies

I recently had a virus and used HP recovery and now I don't have any sound. I originally posted this in the sound card forum and was instructed by deejay100six to go through the five steps of identifying a virus. I completed those steps and below is my Panda Scan results. I have the hijackthis results when ever you need them. I originally went through all of the basic steps to fixing the sound problem but nothing worked. Thanks again in advance.

ANALYSIS: 2008-08-16 02:24:44
PROTECTIONS: 1
MALWARE: 19
SUSPECTS: 2
;***********************************************************************************************************************************************************************************
PROTECTIONS
Description Version Active Updated
;===================================================================================================================================================================================
avast! antivirus 4.8.1229 [VPS 080815-0] 4.8.1229 Yes Yes
;===================================================================================================================================================================================
MALWARE
Id Description Type Active Severity Disinfectable Disinfected Location

A:No Sound/5 steps completed

I need some help here guys. Below is my hijackthis results.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:35:50 AM, on 8/23/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\LogiShrd\LVMVFM\LVPrcSrv.exe
C:\Program Files\Java\jre1.6.0_07\bin\jusched.exe
C:\windows\system\hpsysdrv.exe
C:\WINDOWS\system32\hkcmd.exe
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\WINDOWS\System32\hphmon05.exe
C:\HP\KBD\KBD.EXE
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\AGRSMMSG.exe
C:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exe
C:\WINDOWS\system32\igfxtray.exe
C:\Program Files\Common Files\LogiShrd\LComMgr\Communications_Helper.exe
C:\Program Files\Logitech\QuickCam\Quickcam.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\ALCWZRD.EXE
C:\WINDOWS\ALCMTR.EXE
C:\WINDOWS\system32\agrsmsvc.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\WINDOWS\System32\gearsec.exe

4 more replies

G'day, I'm running Windows 7 Home premium on a Dell Inspiron laptop.

When I am trying to organise my music files and folders in my music Library I randomly get this error:

The action can't be completed because the folder or a file in it is open in another program.

But there can be nothing else open, no media player, (neither WMP or Media Monkey which I usually use), or any other window open at all. This is intermittent. Sometimes it works sometimes it doesn't.

For example; I just discovered that I have a Chris De Burgh folder with a couple albums in it and another folder titled Chris De Burgh - Greatest Hits. I decided to move the latter into the former and rename the latter to simply Greatest Hits. At first it wouldn't copy into the Chris de Burgh folder at all and the dreaded error came up. I clicked on another folder, went back and tried again and it worked. After putting the CDB-GH folder into the CDB one I tried to rename it, (without opening it). The action can't be completed blah blah blah. Retry doesn't work. This time I had to close windows explorer and open it again and browse to the folder and rename it.

Sometimes it works first go, sometimes you have to click elsewhere then come back to it, sometimes you have to close explorer, sometimes it simply refuses until I restart the pooter. I've tried deleting everything in the temp folder, (%temp%) but there are files in here which won't delete either coming up with the same message. I guarantee that the f... Read more

More replies

log listed below : DO YOU WANT THE PANDA SCAN SCAN ALSO?

had constant pop ups- they have stopped- system very slow..avast found virus in operating system-win32:agent-PSG [drp] and vtutr.dll -
trojans

I just know how to computer surf- my son goes to online school- so we really need this computer
log listed below

Deckard's System Scanner v20071014.68
Run by wpccs on 2008-02-03 18:09:34
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

System Restore is disabled; attempting to re-enable...success.

-- Last 1 Restore Point(s) --
1: 2008-02-03 23:09:39 UTC - RP1 - System Checkpoint

Backed up registry hives.
Performed disk cleanup.

Total Physical Memory: 248 MiB (512 MiB recommended).

-- HijackThis Clone ------------------------------------------------------------

Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2008-02-03 18:13:54
Platform: Windows XP Service Pack 2 (5.01.2600)
MSIE: Internet Explorer (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\system32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe

A:hijackthis log- completed 5 steps

Hi dorimom, and welcome to TSF.

Sorry for the delay in looking into your log, as we are extremely busy as you may have noticed. If you still require assistance and are not seeking help elsewhere, then please carry out my instructions.

--------------------------------------------------------------

Please download HijackThis. This program will help us determine if there are any spyware/malware on your computer. Double-click on the file you just downloaded. Click on the "Install" button. It will by default install to the directory - C:\Program Files\Trend Micro\HijackThis

Close HiJackThis

--------------------------------------------------------------

Since it has been awhile... Please run Deckard's System Scanner (dss.exe) again, and post the resulting log.

--------------------------------------------------------------

C:\Deckard\System Scanner\main.txt

5 more replies

Hi

Looking for some help resolving this issue. Computer was acting strange. Scanned with Norton 360 and Malwarebytes and found nothing. Ran TDSSkiller, found and removed a rootkit. Now, when I try to  run Combofix, it stops at Stage 48. The hard drive light is solid, so I figured it would eventually complete, but it does not.

Can you help?

thanks

drobtoy

A:stuck on 'Completed Stage_48'

Hello,Please follow the instructions in ==>This Guide<== starting at step 6. If you cannot complete a step, skip it and continue.Once the proper logs are created, then post them in a reply to this topic by using the Add Reply button.If you can produce at least some of the logs, then please create the post and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the reply and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.

19 more replies

ok, i know i have malware on my computer. i read the 5 steps to do first....

step one-
i ran ad-aware (i have pro edition), no problems found,
aswell as spy bot s& d and cwschredder, all fine

syep two-i have norton and avg, no problems

step 3-none from that list

step 4-none from that list

step 5-can't update from windows, just get errors

here is my hijack this log:

Logfile of HijackThis v1.99.1
Scan saved at 9:57:51 AM, on 5/10/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Documents and Settings\Administrator.JBOOGY\Local Settings\Temporary Internet Files\Content.IE5\ZQQBBUH0\stng260[1].exe
C:\Program Files\a-squared\a2guard.exe
C:\WINDOWS\system32\ntvdm.exe
C:\WINDOWS\explorer.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://us.rd.yahoo.com/customize/yco...search/ie.html
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://us.rd.yahoo.com/customize/yco.../www.yahoo.com

A:ok, difinitely need help. i have completed the five steps

Hi,

Quote:

If you are seeking help for spyware/antivirus issues, or wish to have your Hijack This log checked, please do not post here!

Post it at the HijackThis Log Help section. I think I mod will move this post.

5 more replies

I am using SQL Server 7.0.
I have databases DB1 (only current values) and DB2 (both current and old - keeps history). When I update (or insert), on DB1, a copy of the row I am working on has to be sent to DB2 using a trigger. What gets completed first? The update process on DB1 or the action started by the trigger? I am asking this because of what I found at this site:

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/architec/8_ar_da_1tup.asp

…..
You can use the FOR clause to specify when a trigger is executed:
AFTER
The trigger executes after the statement that triggered it completes. If the statement fails with an error, such as a constraint violation or syntax error, the trigger is not executed. AFTER triggers cannot be specified for views, they can only be specified for tables. You can specify multiple AFTER triggers for each triggering action (INSERT, UPDATE, or DELETE). If you have multiple AFTER triggers for a table, you can use sp_settriggerorder to define which AFTER trigger fires first and which fires last. All other AFTER triggers besides the first and last fire in an undefined order which you cannot control.

AFTER is the default in SQL Server 2000. You could not specify AFTER or INSTEAD OF in SQL Server version 7.0 or earlier, all triggers in those versions operated as AFTER triggers.

…..

This statement sounds confusing?

A:Which is completed 1st? a transaction or a trigger?

Microsoft® SQL Server™ 2000 provides two primary mechanisms for enforcing business rules and data integrity: constraints and triggers. A trigger is a special type of stored procedure that automatically takes effect when the data in a specified table is modified. A trigger is invoked in response to an INSERT, UPDATE, or DELETE statement. A trigger can query other tables and can include complex Transact-SQL statements. The trigger and the statement that fires it are treated as a single transaction, which can be rolled back from within the trigger. If a severe error is detected (for example, insufficient disk space), the entire transaction automatically rolls back.
This means that the trigger completes before the transaction, you can rollback a transaction within a trigger as mentioned above so in your case the action started by the trigger completes before the update action.

2 more replies

A neighbor brought over his computer since he knows I help folks with infections.  It appears he already ran and removed infections found with SAS Portable and MBAM.  I can include those logs if you like so let me know.

DDS Log

DDS (Ver_2012-11-20.01) - NTFS_x86
Internet Explorer: 8.0.6001.18702  BrowserJavaVersion: 10.25.2
Run by HP_Administrator at 12:32:46 on 2013-08-16
Microsoft Windows XP Professional  5.1.2600.3.1252.1.1033.18.958.456 [GMT -4:00]
.
AV: avast! Antivirus *Enabled/Updated* {7591DB91-41F0-48A3-B128-1A293FD8233D}
.
============== Running Processes ================
.
C:\Program Files\AVAST Software\Avast\AvastSvc.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\system32\wdfmgr.exe
C:\Program Files\AVAST Software\Avast\avastUI.exe
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\system32\dllhost.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\WINDOWS\system32\wbem\wmiprvse.exe
C:\WINDOWS\system32\svchost.exe -k netsvcs
C:\WINDOWS\system32\svchost.exe -k NetworkService

A:Infected PC with some Removal Completed

Attached file ...

3 more replies

Hi, I just built a new computer, and it's running XP Pro 64-bit. It ran fine for the first week, but now I'm getting a problem everytime I open "My Computer". Instead of showing my drives, it does the search animation. After a minute or two, it will either find all the drives, or it will say something like "This operation could not be completed because (something) is being used by another program." and gives me two options: "Retry", or "Switch To". When I click "Switch To" it opens my "Start" menu.

A (possibly) related problem is when I open IE, I get shown a set-up menu, but when I click "Save Changes" the webpage hangs. I can bypass this and use the internet fine though. Also, my computer randomly hangs sometimes when playing games.

I'm pretty disappointed with all these errors on what was supposed to be my fresh computer... Any help is appreciated.

More replies

Hello,

Had the "Security Center" come up on this computer...got rid of it using the tutorials on this site, along with trying all the other suggestions for removing rootkits that may be causing the redirects. Some solutions seem to run their course, others don't. Still having issues: browser redirects, browsers stop working, MBAM errors, Start menu blank, "waiting for background programs to end" on shutdown.

So, not sure where to go from here. Help please.

.
DDS (Ver_2011-08-26.01) - NTFSAMD64
Internet Explorer: 9.0.8112.16421 BrowserJavaVersion: 1.6.0_30
Run by Chance at 6:41:48 on 2012-01-23
Microsoft Windows 7 Home Premium 6.1.7601.1.1252.1.1033.18.3895.2379 [GMT -7:00]
.
AV: Microsoft Security Essentials *Disabled/Updated* {108DAC43-C256-20B7-BB05-914135DA5160}
SP: Microsoft Security Essentials *Disabled/Updated* {ABEC4DA7-E46C-2F39-81B5-AA334E5D1BDD}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\windows\system32\wininit.exe
C:\windows\system32\lsm.exe
C:\windows\system32\svchost.exe -k DcomLaunch
C:\windows\system32\svchost.exe -k RPCSS
c:\Program Files\Microsoft Security Client\Antimalware\MsMpEng.exe
C:\windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\windows\System32\svchost.exe -k LocalSystemNetworkRestricted

A:Completed all self-help tutorials, still have rootkit

22 more replies

Thanks a lot to everybody who paid attention to my problems with windows 7 installation.

Finally I went to my university and took from their a windows 7 pro dvd and everything worked perfect. I also managed to install the windows over both windows XP and 7 thanks to your advices and tutorials.
Thanks a lot once again from the not so hot now Greece

A:Installation completed with success!!!!

You're welcome! Thanks for posting back. It means a lot to those that have worked hard to help others when they come back with thanks.

2 more replies

hi guys,

every single time I try to rename a folder the boring message "The action can't be completed because the folder or the file is in use" appears even if apparently neither the folder or a file in it is in use.

What I have to do is: Task Manager > Explorer.exe > End Process > File > New Task > Explorer.exe and I am able to rename the folder.

It is a really boring process and I find this process really stupid. The folders I am trying to rename are full of pictures, I think it is something related to the Thumbs files.

Anybody of you have the same issue? Any possible solution?

Thanks

OpenedFilesView - View opened/locked files in your system (sharing violation issues)
What file is opened by explorer.exe in that folder?

9 more replies

hi there,
plese consider that who's writing (me) is a sw/hw total illiterate..

- at every web connection (firefox), the start page is http://istart.webssearches.com + the last web page visited at previous connection (two windows). i set up new homepage but nothing changes.
- pop ups frequently open (then disabled via settings).
- mouse stops/blocks for a second while using it.

i downloaded combofix and let it run. everything seems worked correctly, but now i don't know how to proceed.
here below the log i got - integral copy&paste - now saved on desktop.
if i understood well, malware etc will be removed once combofix is uninstalled and i still have to uninstall it..

i hope you can help me about how to proceed.

thanks++
iggy

ComboFix 14-05-19.01 - user 19/05/2014  19.13.03.1.1 - x86
Microsoft Windows XP Home Edition  5.1.2600.3.1252.39.1040.18.1919.1432 [GMT 2:00]
Eseguito da: c:\documents and settings\user\Desktop\ComboFix.exe
AV: avast! Antivirus *Enabled/Updated* {7591DB91-41F0-48A3-B128-1A293FD8233D}
.
.
(((((((((((((((((((((((((((((((((((((   Altre eliminazioni   )))))))))))))))))))))))))))))))))))))))))))))))))))
.
.
c:\documents and settings\user\Dati applicazioni\cacaoweb
c:\documents and settings\user\Dati applicazion... Read more

A:ComboFix ran&completed - don't know how to proceed

3 more replies

I've ran Combofix, but need someone to look at my log file. I'm still having boxes pop up like my symantic anti-virus can't work because it is on a network resource that is unavailable. The log file is below. I would really appreciate any help I could get.Thanks,DonComboFix 10-12-09.04 - Todd 12/10/2010 16:39:31.1.1 - x86Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.511.70 [GMT -6:00]Running from: c:\documents and settings\Todd.PHILCON\Desktop\ComboFix.exeAV: Symantec AntiVirus Corporate Edition *On-access scanning disabled* (Updated) {FB06448E-52B8-493A-90F3-E43226D3305C}.((((((((((((((((((((((((((((((((((((((( Other Deletions ))))))))))))))))))))))))))))))))))))))))))))))))).c:\documents and settings\All Users\Application Data\FuhYQAtN.exec:\documents and settings\Don\Local Settings\Application Data\{127EBD9A-1C22-44C3-8173-3067BB23059B}c:\documents and settings\Don\Local Settings\Application Data\{127EBD9A-1C22-44C3-8173-3067BB23059B}\chrome.manifestc:\documents and settings\Don\Local Settings\Application Data\{127EBD9A-1C22-44C3-8173-3067BB23059B}\chrome\content\_cfg.jsc:\documents and settings\Don\Local Settings\Application Data\{127EBD9A-1C22-44C3-8173-3067BB23059B}\chrome\content\overlay.xulc:\documents and settings\Don\Local Settings\Applicat... Read more

A:Combofix completed - need help with log file

2 more replies

Hello,

This is a follow-up to my original thread here -

http://www.sevenforums.com/crashes-d...ease-help.html

I completed 1 RMA with HP and the teleplan service center guys sent me the machine back with the note - no issues found, reloaded OS. This time they loaded the OS with SATA controller as IDE as opposed to the default RAID setting that had come when I had purchased the system.

I let it run overnight hoping for the best but see the BSOD error in morning - I would really appreciate if somebody can pin point the issue so in the next RMA I can advise HP Teleplan guys about it - they seem to not spend great deal of time researching the issue but try to do a quick fix that obviously didn't work.

PS - my System specs -

System Manufacturer/Model Number HP Pavilion Elite HPE-210F
OS Windows 7 Home Premium 64 Bit
CPU AMD Phenom(tm) II X4 945 Processor, 3000 Mhz, 4 Core
Motherboard H-RS880-uATX (Aloe)
Memory 8 GB PC3-10600 MB/sec (message as PC3-8500)
Graphics Card ATI Radeon HD 5450
Sound Card Integrated Realtec ALC888S Audio
Monitor(s) Displays Acer? H243H
Screen Resolution 1920 x 1080
Keyboard HP USB
Mouse Microsoft Compact Optical Mouse Model: 1016
PSU Bestec 300W
Case Mid-size ATX
Hard Drives Western Digital Caviar Green WD10EADS-65M28X
Internet Speed ATT DSL 6 MBPS

A:1st RMA completed - still random BSOD

Your dumps indicate conflicts and memory corruption. Uninstall Symantec using this removal tool: Tool. Many third party security programs create conflicts with Win 7 and Norton is no exception. Norton was involved in one of the crashes. Download and install Microsoft Security Essentials. It will not cause conflicts. Make sure Windows firewall is turned on.

Uninstall or upgrade CyberLink. Its driver, 000.fcl, Fri Sep 26 09:11:22 2008, is out of date. Outdated drivers can and do cause conflicts and BSOD's.

I find another slightly out of date driver loaded on your system. Update this driver from the link provided.

Quote:
usbfilter.sys Fri Apr 03 07:39:51 2009 - AMD USB Filter Driver (likely part of the chipset drivers). http://support.amd.com/us/Pages/AMDSupportHub.aspx. Update this driver.

Follow these suggestion, reboot and let's see if your system is more stable. Post back and let us know. If you get anohter BSOD, upload it and we will go from there.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff80002804000 PsLoadedModuleList = 0xfffff80002a41e50
Debug session time: Thu Dec 16 09:41:31.624 2010 (GMT-5)
System Uptime: 0 days 8:53:11.013
...............................................................

8 more replies

Deckard's System Scanner v20070905.67
Run by Tom Roach on 2007-10-01 10:32:34
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.

-- Last 5 Restore Point(s) --
104: 2007-10-01 14:32:38 UTC - RP355 - Deckard's System Scanner Restore Point
103: 2007-10-01 14:17:25 UTC - RP354 - Installed WinZip 11.1
102: 2007-09-30 07:00:16 UTC - RP353 - Software Distribution Service 3.0
101: 2007-09-29 17:11:48 UTC - RP352 - Removed Adobe? Photoshop? Album Starter Edition 3.2
100: 2007-09-29 16:55:46 UTC - RP351 - Installed Windows Internet Explorer 7.

-- First Restore Point --
1: 2007-09-24 19:33:06 UTC - RP252 - System Checkpoint

Backed up registry hives.
Performed disk cleanup.

-- HijackThis (run as Tom Roach.exe) -------------------------------------------

-- HijackThis Clone ------------------------------------------------------------

Emulating logfile of HijackThis v1.99.1
Scan saved at 2007-10-01 10:39:35
Platform: Windows XP Service Pack 2 (5.01.2600)
MSIE: Internet Explorer (7.00.6000.16512)

Running processes:
C:\WINDOWS\system32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe

A:WinAntiVirusPro - 5 steps completed

2. Double click on combofix.exe & follow the prompts.

Note:
Do not mouseclick combofix's window whilst it's running. That may cause it to stall

13 more replies

Hello and thank you for any help you may be able to give. I've gone through the five required steps before posting my logs for help.

I've run Spybot, Adaware and SuperAntiSpyware and can't seem to clear up whatever the issue is.

Following are the required log files (as well as the "extra" text file attached):

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:06:02 PM, on 1/8/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16574)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\vtsphlxp.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\netdde.exe
C:\WINDOWS\System32\HPZipm12.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wscntfy.exe
C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe
C:\Program Files\ATI Technologies\ATI.ACE\cli.exe
C:\Program Files\YourWare Solutions\FreeRAM XP Pro\FreeRAM XP Pro.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Windows Media Player\WMPNSCFG.exe

A:HijackThis Log - completed 5 steps

bump

anyone?

19 more replies

Hello TSF -

Recently, i have had a problem with my system restore. After i attempt a restore, the computer reboots fine and acts as if it did the restore, but when i sign it, i get a messege saying system restore incomplete, or something along those lines. I decided to check the sr.inf file, right clicked and clicked install, but it said i need a windows XP sp3 cd, and i only have the original SP2 cd, not Sp3. Also i'm not sure if that will even fix the probem, has anyone else seen this problem? any help would be greatly appreciated!

-Thank you.

More replies

Not sure if this is the correct forum to post this in but..

Have installed Windows 8 64bit on three computers, all similar spec (amd a8 processors and gigabyte f2 motherboards with 8gig ram.)

Windows seems to be ok in every other respect other than I am getting an error in the metro store. When trying to install any app I get the error:

I have searched the internet for this error, and although I can find similar errors, I can see no one else having the error code with the same scrambled type.

We got around the error by signing in to a microsoft account, but then we are unable to create a pin for said account (the cursor just spins).

This happens on all three computers.

Any help greatly appreciated.

Have you tried copying & pasting the error code in Google ?

I find that helps.

EDIT--

Perhaps this phone number will help.
I've used it & got good help from Microsoft.

Microsoft Product Support Customer Phone Number | Shortest Wait | Best Support | GetHuman.com

2 more replies

Dear Broni and All,

I have completed all steps, and ran the security programmes recommended in this thread:

http://www.techspot.com/community/topics/keep-getting-stupid-shopping-malware-installed.208648/

However, I am still getting pop-ups and adware related problems, which means that the underlying problem has not been resolved.
These are the programmes that I have run (today, 18/05/2015):
-RogueKiller
-Mbar
-AdwCleaner (it removed NickelBlock, AllCheeiaPPPriCe, DowwnSaave, SaVieNeewaApupoz)
-Junkware Remover
-Farbar Recovery Tool
-Farbar Security Scanner
-Security Check
-Tempfile Cleaner

I am currently running Sophos.
My laptop runs Windows 8.1, and Combofix does not support it.
The antivirus that I have is Kaspersky (I previously had Microsoft Security Essential), and Windows Defender. The malware was not detected by a Kaspersky and Spybot full scan a few days ago. However, on the 26th of April, I manually uninstalled some adware, and then ran full scans, which showed nothing.

As you can imagine, I don't think I have many options left, and formatting my laptop is a dreadful prospect. I was wondering if you could give me some advice.
I have kept all logs of the security programmes that I've run.

Thank you in advance, and looking forward to hearing from you.

A:Completed all instructions, but still getting adware pop-ups

Welcome aboard

Never follow steps from other topics. Every computer is unique.

Please, complete all steps listed here: http://www.techspot.com/vb/topic58138.html
Make sure, you PASTE all logs. If some log exceeds 50,000 characters post limit, split it between couple of replies.
Attached logs won't be reviewed.

Read all of my instructions very carefully. Your mistakes during cleaning process may have very serious consequences, like unbootable computer.
If you're stuck, or you're not sure about certain step, always ask before doing anything else.
Please refrain from running any tools, fixes or applying any changes to your computer other than those I suggest.
Never run more than one scan at a time.
The cleaning process, once started, has to be completed. Even if your computer appears to act better, it may still be infected. Once the computer is totally clean, I'll certainly let you know.
If you leave the topic without explanation in the middle of a cleaning process, you may not be eligible to receive any more help in malware removal forum.
I close my topics if you have not replied in 5 days. If you need more time, simply let me know. If I closed your topic and you need it to be reopened, simply PM me.

57 more replies

I've run CHKDSK on a couple of laptops today, and in each case, after hanging for ages around 10-11%, the laptop rebooted while my back was turned. (The process was run at boot and the internet was not connected at the time.)

Is there a way to check if the process completed and what it did?

There is a CBS log with today's date, with entries that correspond time-wise to the CHKDSK activity, but I don't understand them. At the end there are several entries like this:

Can anyone explain what this means please, and if I have a problem?

Coincidentally (or not) There are similar 'Failed to internally open....' entries in the CBS log from when I turned the laptop back on later in the morning.

A:How do I know if CHKDSK completed successfully?

Hi, check this tutorials CHKDSK - Check a Drive for Errors in Windows 8 and Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums to see if they will help you.

Good luck, werty

3 more replies

The action can?t be completed because the folder or a file in it is open in another program. I suspect that my anti virus, Norton 360, is stopping me from deleting a specific folder, it happens only in one specific folder.
When I restart my computer, it takes time to the regular background tasks to "wake up", so I can delete it once the computer turns on, but then something stops me from deleting the folder. I am not sure if it is Norton 360, or another problem.
Would it be a Malware?

A:The action can’t be completed because the folder or a f...

not positive what it could be ,anything knowing computers .
to see if its Norton 360. disconnect from intern ,disable Norton360 temporally ,how to do so will be in the settings of Norton , after its disable try deleting file.

just found this in google ,how to disable Norton temporally .

Try right clicking on the 360 icon in your notification area. You should be able to disable protection features for a specified time. Remember that you are unprotected while doing this, so you should disconnect from the Internet while doing this. Remember to reset the protection when you are finished.

6 more replies

Trying to restart will not allow me to login, keeps telling me wrong pass word, (didn't think i had setone yet)think its microsoft thats causing the problem, it says i need a removeable media, what the hell is one ofthem. i'm already on line at home.     Can anyone help me please

A:New netbook setup not completed,

Hello, Thank you for posting in the HP Support forum. Is this re. Windows login ? You can't login to Windows? If yes, I have encounter such a problem once only but was with Win 8. Anyway - if this is a new computer you can revert the software back to factory default settings. Eventually you should create a local account (not login with Microsoft account). At the end, you can always migrate the local account to Microsoft account. If this is not re. Windows login, please provide back details.

1 more replies

I apologize if this forum is meant for tech people as I'm a novice computer user, but I really need help.  I have Windows 7 x64 and I used RoboCopy for the first time, and have messed up royally.  I was trying to copy folders and files from my
computer to an external hard drive.  My external hard drive had important files and folders on it already, and I thought that copying more data using RoboCopy would just add to it, but it deleted everything that was on the external hard drive when it
Can I undo what just happened?  Is there any way to revert?  Or maybe there's some way to recover that deleted data?
I used:  Robocopy C:\Users\Name\Documents F:/MIR /dcopy:T
I would be really grateful to be helped.  Thanks in advance.

More replies

I got my P50 a few weeks ago and yesterday its LCD went half black. OK, this happens.I turned it into authorized premium repair center and they got LCD replaced (as my P50 is under warranty). No big deal.However, they could not re-calibrate the new LCD screen because I do not run Windows on my P50 (running Kubuntu).It would not be a big deal either (the Panel Replacement Utility they have does not run on Linux, but I can live without that), however there is one worrying thing: by my request, they printed Lenove repair instructions for me where it is stated, that "Failing to run the Panel Replacement Utility program will require another LCD panel replacement". Please note "will require". My interpretation of this statement is that LCD will fail again unless I run this Panel Replacement Utility which requires Windows (not Linux version exists). Repair guys could not comment on that in either direction.REALLY????So, despite the fact that nor P50 user guide nor warranty description limit me from using non-Windows OS, the P50 cannot be repaired to be used in full capacity unless I use Windows.Do I miss anything? Is this an official position of Lenovo on non-Windows OS use on ThinkPad P50?

More replies

I just started using Microsoft 2010 and in the Outlook tasks I have created recurring tasks. In the old XP version when I completed a recurring task, the completed task would move to the top of the list. Now, it just puts it below the original task. Is there a way to automatically move completed tasks to the top of the page?

More replies

I'll give some background.

I have a tri-boot setup. Windows 8 one ssd, windows 7 pro on a second ssd and ubuntu 13.04 on a partition on a 2 gig raid 1. The boot partition is on the windows 7 ssd. All drives are on the same Intel controller. Prior to the 8.1 attempt it worked. I'd boot the w7 ssd and a black win7 style boot screen would appear with the 3 OS choices. I'd been using win 8 as primary since it's release with no real issues.

I updated through the store early today and the process had a hitch after the first reboot but I rebooted and it completed the install. Windows 8.1 started and walked me though an initial setup. Once in, all looked pretty much unchanged. The only issued was it asked me to reinstall some XLan software.

I rebooted to check my other OS's and the problems began. I boot up, it loaded the blue win8 boot screen with all 3 OS present when I attempted to boot ubuntu it went to a black screen with no possible input. Hard rebooting brought up the grub bootloader (not win8 bootscreen) and I was able to enter ubuntu. Same thing happened with win 7 pro. I soft rebooted and the win 8 bootscreen appeared. Choosing win 7 took me to a hung black screen - hard reboot directly started up win 7. Restarting to win 8 bootscreen again and choosing win8.1 took me to another black screen - Hard reboot from there started up a win 8 repair process.

This is always the case with each of the 3 OS's. I have found that I can get into win8 if I enter through safe mode ... Read more

A:8.1 update completed but problematic

I have the exact same problem. I even had the XLan error you described. Once I restarted the computer, it always go to a black screen. I do not have multiple OS's to boot into, but the black screen always comes up after the little blue windows 8 loading screen.

Update:

When I tried your suggestion of enabling Debugging, it loaded up. However, 1-2 minutes later it would freeze and I would have to push the reset button on the machine. In Safe Mode, I didn't have any of the freezing, but when I tried to uninstall Norton Internet Security, it would freeze. After a restart, I downloaded the Norton Removal Tool, and removed Norton. At this point, starting Windows 8.1 with Debugging allows me to stay freeze-free. However, trying to start up without Debugging gives me the same black screen.

Another thing to note is that when I have all non-Microsoft services stopped, I still get the black screen upon bootup. I'm not quite sure what Debugging mode does in terms of bootup, but its definitely a workaround for now. I used msconfig.exe to keep debugging turned on for now.

Again, if someone figures out the fix, report back.

2 more replies

Recently installed kaspersky pure 2. 0 .Getting error message that backup task has not been completed. I have read that this is a known issue. Is there a solution to correct this problem? Thanks.

A:backup task has not been completed

Welcome to Seven Forumsnancy159. As you say, this is a known issue

Quote:
5. Main known issues

The maximum size limit for Quarantine and Backup and Restore does not work.
Some application windows do not correspond to Microsoft computer management from keyboard standards.
Groups of windows cannot be closed through Windows 7 taskbar.
Application window cannot be closed through Windows 7 taskbar preview.
"A backup task has not been completed" status is displayed in the general protection status and in the Backup and Restore section when backup tasks are performed.
Protection parameters cannot be reverted to default values.
AVZ reports cannot be created under 64-bit operating systems.
In some cases, characters cannot be entered using the Virtual Keyboard in entry fields of web browsers or applications.
When in Safe Run mode, Microsoft Outlook Express (Windows Mail) email client may fail to display some email messages received from the standard Microsoft Windows environment.

Kaspersky PURE 2.0: commercial release (build 12.0.1.288)

Have you tried creating a backup task?

How to create a backup task in Kaspersky PURE 2.0?

A Guy

1 more replies

I had a problem with my yoga 700 11". The laptop freezes every so often (3-6 hours). At first I thought it's the drivers that need to be updated, then Windows 10 updates, then BIOS update.I tried all of that but the problem still persisted. I did the recovery reset but still the same... I created Linux system on USB flash drive and booted the laptop with it. Even under Linux the laptop was freezing.I contacted lenovo support team and they said the laptop needs to be repaired and they send me the return free postage vocher. I put my laptop in the original box and posted it as I was instructed (for some reason it was send to Germany). The company name that issued me with the postage slip was MEDION AG - A Lenovo CompanyAfter 13 days I got an email saying:"...After assessing your device, the repair center has deemed that a repair cannot be completed under the manufacturer?s warranty due the case of the device showing signs of inappropriate treatment. ..." There were two pdf documents attached to the email. one with the detailed photos of the damage ( see photo attached) and the other one, the cost estimate document. In the document I was given two options:1. accept the cost of repair (£54.65)2. not accept and the laptop would be return to me (I would be still charged fat price of £44.07)My reply was that I do not recall the laptop having this damage and I always looked after it. I was suprised when I saw the photo. I also added that my main concern was that th... Read more

More replies

Hi I just completed my second homebuild, I installed windows 7 pro and have been running it for over two weeks now, (got it pre release from msdna for free, thats right free, gotta love being a student, as many copies of 7, vista, xp and visual studio, and tons of other cool software for nada.)

anyway:
asus m4a78-e mobo
8gb (4x2gb) ddr3 ram
amd phenom II 945 3.0ghz quad core processor.
xfx hd 4850 1gb gddr3 gpu 256 bit with 512mb onboard already
2 x 500gb hitachi deskstar hdd's
sunbeam acb9 acrylic green led pc case (12 green leds, with 5 80mm green led fans, and custom fan grills.)
19" tft
650tx corsair psu
onboard sound and networking

it works great, so far I haven't seen the cpu go over 8% you through stuff at it it gives you a blank look and shrugs, it took a virus scan, dreamweaver, word and a few web pages (chrome) at 8% for god's sake. Anyway i'm very pleased with it.

BUT it only lists one hdd in the my computer section and that is the drive that i installed windows on, I don't know if the other one is formatted or not, I would say not, the bios recognises both of them, but my computer displays only one, i have not used raid in any form. Whats the solution?

Thanks alot, bob.

A:New build completed, but second hdd not recognised by os?

you shoud try this :
On "My Computer" Icon right click it and click MANAGE, click on DIsk Management..you may find your C: drive as Disc 0. Then look if you find drives that is unallocated..if you find it, click on the on it, right click and format the drive and click ok..just wait to make a 100% and you should after that it is healthy and formatted and you should the other drives now..try this tnx

3 more replies