Tech Problem Aggregator

Hard Disk replacement details.

Q: Hard Disk replacement details.

I am facing the problem of Hard drive failure with my laptop. I was told to replace with a new hard drive. So, am looking for the replacement details (right from the cost to the service centre location and procedures). It would be most helpful from some guidences.

More replies
Answer Match 64.68%

I want to replace my HDD 360 GB with new SDD disk due to space problems with disk with compaq 420.  System configuration isIntel Core 2 Due  CPU T 6670 @ 2.20 GHz   RAM 4.0 GB ( 2.90 GB Usable)Hard Disk - 360 GBSize - 14" Please advise me wheather I can change my hard disk to SDD. Regards     

More replies
Answer Match 64.26%

I have seen other posts on this but no definitive answer.
My HDD is dying and needs replacing. I see the posotion of the HDD is LHS under the palm rest and there appears to be a removable flap - other posts say there is just one screw to remove but there are no visible screws under the machine.

I have changed HDDs on other Toshibas with absolutetly no problem - anyone any ideas?

A:Hard disk replacement A100

Hi

The HDD replacement on this notebook is not simply procedure. I am not 100 % sure but the whole Palm rest/Touch pad must be removed at first. HDD cover is fixed with one screw but you will see him just if the Palm rest is removed.

When this screw is removed Hold the HDD tab and pull out the HDD assembly. Next step is to detach the HDD bracket from the HDD.
The unit is pretty new and before you do anything checks if the warranty is still valid.

1 more replies
Answer Match 64.26%

We need to recover the hard disk as an ex-employee has deleted some files within the OS.
We don't want to reinstall Windows as it my effect some of the other files he has deleted, by accident!!!!
We have the software to recover the data but need to gain access to the Hard Disk and remove it, then run it on our test machine.

Does anyone have any idea how to remove the hard disk?

A:A100 Hard Disk Replacement

Hi,

you find the HDD when you turn the A100 at the right side! You have to remove only one screw and take the small HDD flap away! Then you can pull out the HDD!


Bye Hans

3 more replies
Answer Match 64.26%

How to replace hard disk in Toshiba NB100

Can anyone help me ?

TY

Sergio

Message was edited by: faggiano

A:NB100 - Hard disk replacement

I believe the HDD is under the top cover which is hard to get to.

You should get a Service Center to do it for you, so nothing gets damaged and your warranty stays valid.

13 more replies
Answer Match 63.42%

My laptop hp 15-n029sg was showing the imminent hard drive failure message. I have checked the hard drives through "Check Now" options. Every time I scan some problem is found and I fix it accordingly. But then again it shows some problems are found when scanned again. Is there any way I can find out where the problem is gone or not? Eventually I guess I have to replace the hard drive. Can anyone suggest the proper i.e compatable hard drive for my laptop?

A:Replacement of Imminent Failing Hard disk

Hi, The drive on the link below is an example of one that would be fine for your notebook.  1Tb Notebook Hard Drive. The procedure to replace the Hard Drive starts on Page 77 of your Maintenance & Service Guide. Once done, simply use your Recovery Media to reinstall the Operating System on the new drive - this procedure is detailed in the following HP document. http://support.hp.com/us-en/document/c03489643 If you don't have your Recovery Media, see if you can order a replacement set using the link below. Order HP Recovery Media.  If you have any problem with this link, try ordering this directly from HP. If you live in the US, contact HP Here. If you are in another part of the world, start Here. Regards, DP-K

1 more replies
Answer Match 63.42%

Hello to all fellow Lenovo owners. Recently, my G570 Hard drive crashed. I  removed it and will purchase anew one but desperately need detailed, specific instructions about formatting, partitioning and installing Windows 7and whatever else is necessary to get up and running. I'm not a techie, but am handy and wiling/able to learn.Thanks in advance for any help. dcnyr












Solved!

Go to Solution.

A:g570 hard disk drive replacement

hi dcnyr,
 
Welcome to Lenovo Community Forums!
 Were you able to Create a Recovery Disc from the old HDD when it was still working? or you have an RCD when you first got the unit?
 Because if you have, you don't have to worry about any partition or procedure just pop the First RCD and just follow the Prompt,
 
but If you were not able to create set of Recovery CD then,
 
First you can contact Lenovo To Purchase a recovery CD
 
and another option is this:
"There's a big possibility that you're able to activate Windows 7 64bit using that COA,
 
Try to:
1. Create a recovery disc (just in case something goes wrong, you can revert back the preloaded OS)
2. Download and install Belarc Advisor to extract the Windows 7 product key on the BIOS.
3. Download a Windows 7 ISO and burn it using imgburn. Check here how
4. Install Windows 7 using this guide (use the key that you obtained from Step 2 if necessary)."
 
Hope this helps,
Cheers!




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

8 more replies
Answer Match 63.42%

Good morning to everyone,I have a DV6735el, PN: KN782EA#ABZ and I would like to upgrade to 4GB RAM (ok) and a drvie bigger than the default 250GB. Does this model support:1 o 2 TB?I suppose it can use interface Sata III (without spped improvement).It requires drive with hight 10 mm or can I use also 15mm? Thank You   











Solved!
View Solution.

A:Maximum size Hard Disk replacement

Any 2.5 inch wide and 9.5 mm thick SATA laptop hard drive will work and they do make 1 and 2 TB models so those are fine. It can be SATA III but will only work at a lower SATA speed on your laptop. Post back if you need any more help. 

6 more replies
Answer Match 63.42%

I bought this computer new several years ago and the hard-drive died today.  I went out and bought a new internal hard-drive, but I did not realize that I also needed to install an operating system with the new hard-drive.  So, I am trying to see what I need to do to get my new hard-drive to boot up?  I do not have the recovery disk that came with my computer.  I was told that maybe HP could send a new Operating System disk so that I could reinstall windows.  Any help is greatly appreciated.  Thank you

More replies
Answer Match 63.42%

Hi all,

I need to replace my hard disk (Toshiba 40GB) and the configuration of my laptop E-SYstem 3089 is the following:

quite scary to be honest: there is a sort of armor protecting the hard disk and I don't know how to get it out... do I need to dismount all the pieces?
So please if someone experienced of this EI-Systems can share a tip, I'd be very happy and grateful. Thanks in advance!!
Joe User
 

More replies
Answer Match 62.58%

Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-4F8HK-M4P73-W8DQG
Windows Product Key Hash: Xs1iQgVeo0C+sObJxS7eu+FuBPQ=
Windows Product ID: 00359-OEM-8992687-00057
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7600.2.00010300.0.0.003
ID: {885A901D-B8AC-437A-9497-77D160681927}(2)
Is Admin: No
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7600.win7_ldr.110114-1504
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_02... Read more

A:Invalid Product Key, when activating after a hard disk replacement

The serial used is the OEM SLP key, that is the key the computer was installed with when it left the Toshiba factory. To use that key you have to use the Toshiba recovery disks to reinstall.
If you do a clean install from any other Windows 7 DVD you have to use the serial that is on the case of the computer/laptop.
You could try and call MS support and explain your problem. You might need to call several times as some of the support guys are less friendly than others.....

2 more replies
Answer Match 62.58%

I suspect that my 640 GB hard disk (from 2008) is nearing the end of its life and would like to plan for a replacement.There does not appear to be much if any chance to replace such a SCSI disk any more.What is the best type of disk to replace it, and does it need a new controller?I run Vista (original OS) and Windows 7 (new) in a dual boot configuration.It has currently three volumes, a Vista C: drive (c.300 GB), a Windows 7 C: drive (c.300 GB) and the HP "FACTORY_IMAGE" drive 15 GB

More replies
Answer Match 62.58%

Hi - Yesterday, my Averatec 3250 laptop stopped working and now I cannot boot it up. I am getting a "SMART command failed" and subsequent message about disk read error. It sure sounds like the hard drive is shot. This machine gets light use, so this is very disappointing as I bought it new in late 2004. I was thinking about replacing the hard drive, but there is no information in the user manual. Any advice appreciated.
 

A:Solved: Averatec 3250 - Hard Disk Replacement

16 more replies
Answer Match 59.22%

Hi there,

This time of year I usually use my old version of Plaxo to get everyone to update their contact details in my Outlook.

If you're unaware of how it works - this is what happens.

An email goes out to all your contacts (1200 in my case!). Then that person clicks on a link and they see their details on a webpage in which they can update/add/delete any details that have changed. Stuff like jobs, different numbers, addresses etc.

As you can imagine this is really handy this time of the year with Christmas Cards!

Plaxo have stopped supporting this older system now and doesn't work so I'm DESPRATE to find something simliar does anyone know of one?

Many Thanks
 

More replies
Answer Match 58.8%

Hi, I have a Lenovo G500s 59388294 15.6 inches Laptop.Recently the screen of the Laptop got damaged and i plan to replace it myself. Please help me with the Model of the screen i need to buy. Thank You.

More replies
Answer Match 52.5%

My company's computer needs to be patitioned and reformat. The system is still working well. I mean, nothing wrong with anything (weird huh?). Ok the hard disk just need to be 'split'. I mean, make drive C & D on the hard disk. I know how to do that... easy... Then the HD need to be formatted & reinstall windows XP. Ok, easy too..

But the main problem occured before I do anything (partition & format). I have my own bootable CD that I usually use for partitioning & formatting.

Ok, i insert the CD & restart.
I went to BIOS & changed the boot order (1st boot: CD-ROM, 2nd: HDD-0 & 3rd: Floppy). Then restart again.
Ok the bootable CD is excellently loaded.
I typed fdisk, then came the first problem. it says something like 'no fixed disk'. I exit fdisk.
Then I typed format c:, 2nd problem occured. it says something like, 'invalid drive'.
I forgot the error message because the pc is in my office right now. I'm currently at home 'begging for help' So the error message is not accurate. sorry..

I think, if I run the CD, the hard disk will not be loaded (or should I say, hard disk failure). & If I take off the CD & restart again, change the BIOS (1st boot: HDD-0) then windows will load! Weird right?

I don't think my CD is 'corrupted' nor broken because I tried to run the CD from another PC. Yes, I can access the C drive from that PC.

Does anyone have any idea of the ... Read more

A:Can't format hard-disk nor do partition when using boot disk. Hard-disk failure

It sounds like it might be the bootable CD you've created is not picking up the HDD's/partitions.
To eliminate this as a posibility travel to bootdisk and grab the WinME bootdisk and boot from there. If it picks up the HDD you can FDISK and Format from there.
The other option is to boot using the XP CD and let it handle the formatting/partitioning duties...

patio.
 

14 more replies
Answer Match 49.98%

Hard disk type : Seagate SATA.
Model Number : ST3160215AS
Serial Number : 6RA1J7H0
Firmware Revision : 3.AAD

OS : XP SP3
Mother Borad : Intel 945 GCCR

My hard disk has passed Short DST and failed Long DST of SeaTools, do the hard disk going to fail? If yes, how to transfer my data to a new hard disk easily?

Complete description of the issue :

1.I have experienced boot up issue with my PC 2 days back. My PC not even boot into safe mode also.I got the following blue screen errors on successive restart of PC .

A. 0x00000050 ( 0xC374037F, 0x00000000, 0x804FBA19, 0X00000000 )
B. STOP : C0000135 ( Unable to locate component )
c. 0x0000007E ( 0XC0000006, 0X80698C12, 0XF79896E4, 0XF79893E0 )

2. I have removed and replaced the hard disk ( several times ). I can boot into windows now and can work normally, But,one of the above Blue sreen errors is coming all of sudden while working on PC. It is happening independent of the application I am using.

3. And the following messages are coming at the XP welcome screen and while working on the PC.

A.C:\windows\system32\drivers\etc\netloc.wlt has corrupted and unreadable. Perform CKDSK.
B.C:\windows\system32\drivers\etc\APPFCONT.DAT has corrupted and unreadable. Perform CKDSK.
C.C:\windows\system32\drivers\etc\idsflt.cfg.bck has corrupted and unreadable. Perform CKDSK.
D.Cagefile.sys has corrupted and unreadable. Perform CKDSK.

4.I have performed CHKDSK on all local drives exept local drive C. CHKDSK giving a message that " can no... Read more

A:My hard disk has passed Short DST and failed Long DST of SeaTools, do the hard disk g

In a Run box, enter "chkdsk /r"
You'll be asked if you want to run chkdsk at the next reboot. Enter "Y".
Reboot, and be prepared to wait, as it may take a long time.
 

2 more replies
Answer Match 49.98%

For Windows 8/8.1, in the File explorer details view, is there any way for me to have a column for "Size on disk" as well as your traditional "Size" column?

More replies
Answer Match 49.56%

Hi,

Could anyone please let me know the below cost estimation details roughly.

Hard Disk for Laptop(250GB) - ?
DDR2 RAM for Laptop(2GB) - ?

Awaiting for the reply.

Thank you for your valuable time.
 

A:cost details of hard

6 more replies
Answer Match 49.14%

Greetings,
 
I have an Asus laptop running windows 7 64 bit and this laptop came with 2 hard drives, each partitioned into two parts (C:\ & D:\ and E:\ & F:\).
 
I am transferring over 30GB of data from one drive (C:\) to the other (F:\)
 
Get this... the transfer rate is 1.2MB/s right now. Over 9 hours left to copy the 30GB. There are over 125,000 items but that still does not justify the 1.2MB/s
 
I am open to any suggestions but first, a few points.
Yes, I am sure they are two separate drives with those partitions.
Error checking showed zero errors on both drives.
This is the 3rd time I am trying a transfer.
Both drives are relatively empty (especially the F:\).
C:\ is my system disk.
The SMART data shows no read/write errors or overheating.
I have disabled the virus protection and all real-time scanning.
 
Again, I am very open to suggestions and checks. Feel free to post your idea!
 
 
Thanks in advance!

A:Laptop Hard Disk to Hard Disk transfer Extremely Slow

My experience with file transfers of the type you describe...is that the number of files doesn't matter...what matters is how large the files are.  Video files take much longer than text or document files.
 
Slow transfer rates between partitions/drives...can indicate a problem with either the partititon or the drive, IMO.
 
Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

2 more replies
Answer Match 49.14%

Windows XP sp2 wont boot from hard disk.

After much to do turns out my computer doesnt recognise the hard disk.

I have a seagate 500Gb SATA hard drive, its about a year old, the computer doesnt get hot in the slightest and it shouldnt be dead. I checked the wiring, as far as i can see, its all fine.

only conclusion i come to is that my hard disk is kaput which it shouldnt be. Can anyone give me any other possible solutions to try out before i cry and/or spend money on a new one? theres a lot of data on it i dont want to lose.

If not, ill plug it in to another computer to check, i havent done that yet because it will take me hours - i can only unscrew the hard drive from one side without rearranging the room.

ty!
 

A:Hard disk boot failure -> computer won't recognise hard disk

Is your Seagate the 7200.11 series?

We've been seeing a lot of harddrive issues layely that has nothing to do with the drive itself but bad SATA cables aas the cause. Do you have another one you can switch out?

When you say the computer doesn't recognize it we're talking the BIOS here, correct?

Another suggestion is what you have already suggested but I would "slave" it in antother system and see if you can access it that way.
 

5 more replies
Answer Match 49.14%

Hi guys,

I will try to explain this as simple as i can.So let's start
I have laptop ASUS N75SF and it is a year old,so i have decided to format.I have two separate hard disks that are the same brand,SeaGate 9500423 AS, each 500 gb capacity. Before i decided to format , one of my hard disks(that is my partition D) started to make strange noises and it was not recognized,but i was using my laptop without problems because my windows was installed on my other hard disk (that is my partition C).So now my question is this :
After i formatted them both i have no clue which one is which ? they are like :
Disk 0 Partition 1 465 gb
Disk 1 Partition 2 465 gb
So how do i choose the one that is better and not having problems to pust my winodows on?
I know that i can buy new one and replace it with the one that is having problems,but right now i have no money to do that .I am student

Thanks in advance

A:Confused about installing Windows on my hard disk,hard disk problem

I'm willing to bet that Disk 1 is the bad hard drive since the bad hard drive was the D: drive.

6 more replies
Answer Match 48.3%

I apologize for the brief title and for this being in the wrong category if it is.

I recently purchased an 8 bay external hard drive tower (similar to a Drobo). I have 4 external drives I removed from their enclosures and installed in the tower. When I installed 4 of the hard drives my computer only recognized two of them.

I went into my disk management and assigned a drive letter to the 2 drives it did not recognize. When given the option to format them, I chose "no" because they contained data.

Windows now sees the devices with a drive letter, but each time I double click on that drive it tell me I need to format it before use. If I do so, I will loose the existing data.

I have downloaded a trial of a data recovery software and it sees the data that is on the disk (don't ask me how).

How do I get the data off the drive without formatting the disk?

Please help. This is my life's work.

Thank you.

A:Hard Drive Problems - Please Read For Details

You could give Recuva (freeware) a go. Excellent program.

2 more replies
Answer Match 48.3%

I recently bought a new computer with windows 7 ultimate 64-bit on it and i want to put my hard disks from my old Windows XP SP2 32-bit computer onto this new one, however after i plug them in and turn the computer on windows 7 doesn't load up and all i get is a message asking me to insert the proper dvd or reboot or something along those lines. If i disconnect the drives then turn it on it does load up windows 7 and at that point i can plug in my HD's and the computer can find them through device manager, however this is extremely awkward and requires me to have my case open all of the time. Is there anyway i can fix this that wouldn't revert to me formatting the two hard disks? They are both SATA so its not as if they are ancient.
 

A:XP hard disks to 7 don't work, click for details.

9 more replies
Answer Match 48.3%

Hi guys,

I have been handed a PC by a Private Investigator, who needs to find out details of bank accounts, his activities, his properties etc etc from the hard drive of a guy suspected of fraud. Is there any software that can do this besides just running Windows searches and searching the Internet files.

He is a registered Private Investigator so all of this is above board.

regards,
Jonathan.
 

A:How to extract personal details from hard drive

6 more replies
Answer Match 47.88%

I have a friend in the business of recycle/disposal of computers, monitors etc. He showed me a pile of laptops that they have, each with the hard drive scrubbed and no MS CD to restore the software. These are pre-XP laptops, probably 4-6 years old.

He offered one to me but with no software restore CD. Has anyone ever been successful in obtaining a legitimate restore CD for such a laptop?
 

A:Has anyone gotten a MS replacement disk?

What is wrong with going out and buying a retail version of an Operating System. If you don't want to pay for Windows, download a version of Linux and run that.
 

2 more replies
Answer Match 47.88%

I have a Maxtor D740X-6L 40gb drive but there are no details marked on the drive casing for me to enter into the BIOS. The BIOS shows most items as AUTO and everything works OK but I need to enter the drive details into the BIOS because when I use Acronis TI7 I cannot make a drive restore when using the TI startup disk as it says it cannot find any hard drives. (When I exit TI the PC starts normally).

I figured that if I fed the drive details into the BIOS instead of AUTO it might enable TI to 'see' the hard drive at TI startup.

I have Googled the drive but I cannot find the relevant details as required by the BIOS; namely -

cylinders
head
sector
CHS capacity
Maximum LBA capacity
(although I think the last two might be automatic, currently shown as 0mb)

Usually this kind of information is marked on the drive itself but not in this case.

Can anybody advise, please?

johnni
 

A:Solved: Maxtor hard drive details required

10 more replies
Answer Match 47.88%

Hi, I have a LACE 500 gb, external hard drive that I purchased for myself to help with the memory space on my laptop.

Anyways, a few minutes ago, I plugged it into my laptop via the usb cord and waited for it to boot. It started booting up, and then suddenly when it was loading in the Autoplay, it was taking forever at a certain folder and started making a clicking noise. I canceled the Autoplay and opened up My Computer to get the drive from that area. I click on the H extension, open up the hard drive and I am searching to get a picture that I want that's in a folder. I click on it and it takes forever to load, making that clicking noise and then finally it opens. Everything is taking forever to load, and when it's loading, it makes the clicking noise in my external hard drive.

The other day, I was carrying it, and it fell out of my hand but I wasn't high so it didn't fall from a high distance. I thought it was fine, because I recall using it previously before my attempts today. So I have no idea what's wrong with it. When I click on the image itself, it opens up fine in the Windows Viewer, and doesn't do any clicking noise whatsoever. It only does it, when it comes to folders.

It is opening up, but it's taking FOREVER and it's making an annoying clicking noise. Can anyone tell me if they've experienced this before and what they did to fix the problem?

Thank you and look forward to the response!
 

More replies
Answer Match 47.88%

I am having this Hard Disk problem. My old Hard Disk (Samasung 500GB) (bought in 2010) started showing signs of corruption (like Windows doing chkdsk at every boot, and data getting lost). So I bought a NEW Hard Disk (Western Digital 1TB) last month (Sep 2016) to backup all the data from old one. I didn't have time to backup but wanted to use PC so I Clean Installed Windows 7 64bit on the New Western Digital 1TB and used it about a month without any problems.
 
A couple of days ago i decided to backup up the data. I reformatted the New Western Digital 1TB with Gparted and did a clean Windows 7 Install again. I connected the old Samsung 500GB to the motherboard and started copying the files to the new Western Digital 1TB.
 
Suddenly Windows showed me an error "Windows detected a hard disk problem" which makes sense because the Samsung 500GB is old and might be failing BUT the error is showing both of my Hard disk in the dialog box.
 
Is my new hard disk corrupt as well?
Why is Windows showing my new hard disk as failing?
Can Windows mistakenly show both hard disk in error?
 
Please help i am confused. sorry for a confusing question. i will answer anything required.
 
I have taken the screenshot of the error message, they are in attached files.
1)The 1st Screenshot shows both my Hard disk in the error box (OLD Samsung and NEW Western Digital WD)
2)The 2nd Screenshot shows only one of my Hard disk and its the new one (Western digital WD)

More replies
Answer Match 47.88%

i have a 80gb internal hard disk since it was not sufficient i switched up to a 500gb hard disk so i want to know whether i can use my 80gb hard disk as an external hard disk
if so how please instruct me
 

A:how to change a internal hard disk to a external hard disk

Is the 80gb drive ide or sata?
 

3 more replies
Answer Match 47.88%

Hi..im new on this forum and i have a problem with my old hard disk..every time i turn up my pc, windows pop out message ""Windows detected a hard disk problem" ,"Back up your files immediately to prevent information loss". So i decided to replace my old hard disk, but problem is that i have vista preinstalled on my old hard disk. So my question is how can i install vista from my old hard disk into my new one?..please help me and thank u for your reply

A:how to install preinstalled vista from the old hard disk into the new hard disk?

hi check out this first http://forums.techguy.org/hardware/7...e-failure.html just in case and if you do need to read this http://en.wikipedia.org/wiki/Disk_cloning

6 more replies
Answer Match 47.88%

What is the difference of 3.5 external hard disk (e.g. WD My Book) vs a 3.5 internal hard disk fixed into an enclosure to work like an external hard disk?

Are both good to be use as an external drive to store backup?

What 3.5 enclosure is good?

Thanks

A:3.5 external hard disk vs 3.5 internal hard disk with enclosure?

What do you mean fixed into an enclosure to work like an external drive? Are you referring to a My Book 3.0 VIA USB 3.0.... vs.... an internal SATA III SSD or HDD? Be a little more specific.

8 more replies
Answer Match 47.46%

Is it possible to buy a replacement install disk for WinXP Pro from Microsoft? I've tried to do repair installs in the past and had error reading my install disk tho I've tried to take very good care of it.
 

A:Getting a replacement XP install disk

I'm pretty sure they will give you a replacement but I believe there's a small handling fee under $10.00 if I'm not mistaken.
 

1 more replies
Answer Match 47.46%

Hi I recently had a hd failure on my ibm thinkpad and had to replace the hd but dont have my original xp disk so i put my old win2k pro on it. Now im putting a gb of ram in it and want to reinstall xp. The laptop came w/ winxp installed and i have the cert. of authenticity sticker and my key code attached to back of comp. Can I contact microsoft and get a replacement disk? Thanks for any input.

A:[SOLVED] xp disk replacement

Hi aoneeyedcobra, Welcome to TSF!

Certainly you can telephone Microsoft?; explaining the situation fully to them, and I am quite sure that they will be able to help you.

There might be a small charge for a replacement disc.

Kind Regards,

3 more replies
Answer Match 47.46%

Hi guys,

My old laptop died. However, the hard disk is intact, and I can use it in a caddy and view these files from the hard disk, on my new laptop.

I had a bunch of sites configured in Dreamweaver on my old laptop. For one of them, I do not have any independent record of the ftp, username and password details!!

So I need to get them off my old hard drive. I would have run Dreamweaver on my old laptop and exported the site details so I could view them on the new laptop.

However, I can't run Dreamweaver on my old laptop, as it's dead!

So my question is, given that I have my old laptop's hard drive intact, how can I locate the Dreamweaver site definitions and export them so I can import them to my new laptop?

is it at all possible?

thanks
Christopher
 

A:Dreamweaver - transfer site details from old hard drive (dead pc)

I've never had to do this for Dreamweaver, but I have fore other programs, for the same reason.

You should try to sync the folders; this might save you a needless headache....

First install Dreamweaver with the exact setting you used on the laptop. Then use Microsoft's SyncToy or PortableApps's Toucan To synchronize the Dreamweaver laptop folder with the Desktop's folder.

I can't think of a reason why that info wouldn't be copied along with the rest; unless for some reason it's being stored outside of Dreamweaver's folder.

Also, make sure Windows is set to show hidden files and folders before you start, and make sure Dreamweaver isn't running.

Start -> Control Panel -> Control Panel Menu -> Tools -> Folder Options -> View -> check "Show hidden files and folders"

Hope this helps
 

1 more replies
Answer Match 47.46%

Hello every one.I am having a very wierd issue with my hard drive dissapearing.

When I Run a specific Bukkit Minecraft server (I have MANY servers with the EXACT same configurations and plugins;none of these have this problem) which is on my E Drive (Which is not a partition of my c drive)
my C drive usage will start having 100% usage spikes and after a few seconds the C drive stays at 100% usage
and then the E drive dissapears and won't reappear on the list until I restart the computer

P.S. When Firefox is open Firefox seems to be using the disk at 100% but when fire fox is closed the System process seems to be using the disk (or System Host (Peer Networking)Sometimes)

A:Wierd hard drive disconnect issue. Details inside

Since these are shares. Are they coming off of a remote server, or a server in your place of residence.

3 more replies
Answer Match 47.46%

I have filled in the wrong details setting up my internet details, can I clear and start again

More replies
Answer Match 47.04%

How can I re-associate .mp4 files with video details displaying in the Details Pane? After installing the K-lite codecs pack, my mp4's all began displaying in the details pane as audio files (Album, Artist etc) and no longer displays the important video default details (size, frame height, bitrate etc). I assume it was because of incorrectly associating file types when installing the codecs (even though wmv's, avi's are still correct), so I uninstalled the codecs but the Details categories remain for typical audio files. I've exhausted The Google and I'm stumped... any help? (Win7, 32-bit with VLC as my default player) Thanks!

A:Details Pane associating mp4 video files with audio details

Have you tried resetting your Folder Templates?

Tutorial
Folder Template - Default

5 more replies
Answer Match 47.04%

I will try to keep this as brief as possible and yet give you wise and wonderful tech persons all the information you need to help me out. I am intelligent, but NOT a super-user.

I have an e-machines desktop computer. It is old. A Cyrix MII 266 processor with upgraded memory. I have a 10gb Maxtor hard drive which is the issue at hand. I am running Win2000. My home computer (the e-machine desktop) is networked through a router with my printer and my business laptop.

The problem: Win2000 loads and boots. It LOOKS like it's functioning properly. However, it cannot read any of the files on the disk. When I try, it tells me C: is inaccessible. I can't search, explore, etc. The files are "non-existent."

I managed to get Windows to create a backup of it and saved that file to my Laptop. I can only "assume" that it actually backed up ALL the files on the drive so they are safe.

One really ODD thing you should know is that I cannot get into the BIOS. When it boots and usually gives you that second or two to hit [F2] and enter setup ... doesn't do that any more. I sit and hold the F2 key. Nope. I've second-guessed myself and tried the ESC key and the F1 key. I've tried it with and without the CTRL key. Nothing. So I can't even tell the silly thing to boot from the CD instead, load onto my D: backup drive and then kill the C: drive. It's like it's possessed.

Things I've already tried (not necessarily in this order):
1... Read more

A:Solved: Hard Disk issue similar to "Help! Broken Hard disk" Thread

14 more replies
Answer Match 47.04%

Hello

I am after some guidance on which replacement disk to purchase for this Toshiba Satellite Pro A10 laptop, model PSA15E-03U7V-EN. It still has the original 30GB disk in it but it's been showing errors when checking the disk with the Windows XP tool (it's still useable though). I've made a complete backup to an external drive.

Thanks in advance
Themos Tsikas

HWinfo32 output follows:


General Information
Drive Controller: E-IDE (ATA-5)
Drive Channel: Primary, Master
Drive Model: TOSHIBA MK3021GAS
Drive Revision: GA124A
Drive Serial Number: 73J94628T
Drive Capacity: 28,615 MBytes (30 GB)

Drive Geometry
Number of Cylinders: 16383
Number of Heads: 16
Sectors Per Track: 63
Bytes Per Sector: Unknown
Bytes Per ... Read more

A:Disk replacement on Satellite Pro A10 (30GB)

In my opinion you can use every HDD up to 100GB. Important is HDD interface and, as far as I know, HDD in this old Satellite notebook has IDE (ATA-5) connector.

3 more replies
Answer Match 47.04%

Well I have found replacements for all the apps in the Norton System Works Suite that work better than those in NSW. But need a recommendation for a replacement for Norton disk Doctor. ANy ideas - Easy Recovery, Disk Editor, Recovery4All or any other app you can suggest. These are not exact replacements but what I would like is an app that can repair damaged or corrupted files or sectors on a disk.
 

A:Replacement for Norton Disk Doctor??

At the risk of pointing out the obvious... There is always the native Windows ScanDisk.
 

2 more replies
Answer Match 47.04%

Hi, i'am trying to look for a free "Norton Disk Doctor" REPLACEMENT!Something thats Almost 100% like it and does the scan, and reboot scan the same way, i know of the winxp one i have, but it does work the sane way ndd dos, btw it the one from norton utils 2002, but all i want is the "Norton Disk Doctor" type of REPLACEMENT! Thanks!SPLIT from the "Freeware Replacements For Common Commercial Apps" Forum. ~acklan~

A:"Norton Disk Doctor" REPLACEMENT?

Gparted The best and easiest (re)formatting tool I have seen. It changes from NFTS to FAT32 and vice versa no problemo!! Dump partition magic

6 more replies
Answer Match 47.04%

Had to replace my HD on Acer Aspire. Tech guy reloaded 7 but it doesn't work correctly. I've replaced it with XP temporarily but I want to reload 7. I don't have a disk but I do have the product key.

A:Need to reload 7 after HD replacement, no disk, have Prod ID

Do you have a COA sticker on the machine as shown below with a readable Product Key on it?

If so what is the licensed version printed on it?

If Win7 did not come with the machine, what version did you buy?

4 more replies
Answer Match 47.04%

Hi,

I have an ACER Aspire 7535g with a failing HDD.

I want to replace it with a spare HDD I have from a different company.

How would I go about transfering my valid copy of Windows on to the new drive? Originally the ACER had Vista installed, and I upgraded using an ACER branded 7 upgrade disk.

Cheers

A:Upgrade disk install on a replacement HDD

You should be able to clean install on the spare hdd using the upgrade disk and this method.

Clean Install with a Upgrade Windows 7 Version

Then use the product key that came with the upgrade disk.

9 more replies
Answer Match 46.62%

the laptop is a Dell Inspiron 15–5559. The white LED blinks 4 times then the orange blinks twice.
Sometimes it works, but after the first time it started up it barely ever works.
I tried starting it with the battery, without it, with the cord, and without that.
What’s going on, and how can I fix it?

More replies
Answer Match 46.62%

I need a little help with something that seems simple. I am using Windows 7 Enterprise 64-bit. I have changed the columns in Details view in a folder. However Windows is not populating those columns, so what am I missing? This holds true on both my network drives and my local drives, so I checked my indexing options and they are set to index my local drives, so I assumed that should have at least worked. Any help would be very much appreciated.

A:Windows 7 Details View not showing details/data

Welcome to Seven Forums JLH1. Try this:

Right click an empty area in that folder> Sort by> More

Scroll down the list and make sure the categories you want are checked> OK

A Guy

5 more replies
Answer Match 46.62%

Need replacement disk for hp omni 220. Measures 5.25. can't find any. 2TB 7200 rpm SATA hard drive. Thank you!

More replies
Answer Match 46.62%

My HP nc6320 has a knackered hard drive. I'm looking for a replacement but can't locate one.

The original is a Seagate Momentus 5400.3 - 60G Serial AT or SMART SATA.
The specs say up to 120G 5400 rpm
Anyone know either where to get one or is there an available equivalent ...e.g. WD

Many thanks
 

A:Looking for replacement disk drive (internal SATA)

Here's three, two are WD.

http://www.newegg.com/Product/Produ... 600030585 600003341&IsNodeId=1&name=5400 RPM
 

2 more replies
Answer Match 45.78%

My computer starts up to a black screen displaying smart hard disk error hard disk 1 (301), f2 system diagnostics enter continue start up. Run diagnostics hard drive failed with an error code. Tried to reset bios start up no luck, tried to do the recovery it says pic need to be repaired and won't let me go any further. I lost my recovery discs when I moved into my new house. Help

More replies
Answer Match 45.78%

the message I get for my HP desktop windows 8hard disk error Hard disk1 (3F1)why and fix it how?edited by moderator: Email address removed for safety

A:What caused & how do I fix Hard Disk error: Hard disk 1 3F1

Check cable connections at back of drive 1 are firmly connected.Try a new SATA cable to drive 1.Test drive 1 with SeaTools: http://www.seagate.com/gb/en/suppor...

3 more replies
Answer Match 45.78%

Got some problem here,just recently bought SATA 3.0 hard disk(samsung)and i forgot if my motherboard support this hard disk,after checking it only supports 1.5 SATA.I visited samsung website on how to force my Hard disk to run at 1.5,
I'd follow what the site told me to do but no luck still got the same problem ("Hardware Initiate failed,Please check device) (The BIOS does not be installed)

Anyone got an idea how to fix this,might be some BIOS set-up?Kindly walk me through,Im still using my trusted desktop Motherboard Asrock p4v8+ BIOS P1.50.Badly need help
 

A:SATA Hard Disk 3.0 to MOBO 1.5 Hard Disk

10 more replies
Answer Match 45.78%

My hard disk (C drive where the windows 7 is) is going to fail soon. It has some bad sectors and some corrupted parts and I encountered blue screen that says something about hardware failure. When my Acronis is doing backup, Acronis stopped half way because it cannot access some sectors to do the backup, it was fine previously.

I can still login to windows (depends on luck).

1. I want to change to a new hard disk, what is the best/fastest way to do it?

2. If I copy the whole disk to another new disk, would I encounter problems copying half way since there a

3. Will the data copied to new hard disk be incomplete since there are bad/corrupted sectors on my old hard disk?

4. My old hard disk is 1TB WD Black. What should I use for the new hard disk? Does it need to be same size and model?

Thanks a lot. Greatly appreciate your help.

(I do know how to change a hard disk and reinstall Windows 7 (Windows 7 updates took a long time) and install all programs again and setup again. That would take a few days so I am wondering if there is a faster way.)

A:Hard disk is failing, how to change to a new hard disk?

If you don`t have a complete backup image, then there`s nothing you can do about it. You`re gonna have to re install windows.

Get your data off before the drive dies.

Your new drive does not have to be the same size and model, you can get whatever you want.

7 more replies
Answer Match 45.78%

HiCan someone please tell me how to copy eveything from hard disk #1 to hard disk #2then remove hard disk #1 and use hard disk #2 in its place..???I have tried a few different things that I know of and i'm out of ideas!Any help will be much appreciated!RegardsJim

A:Hard Disk To Hard Disk (straight Copy!)

Download Digital Dolly 1.0 and burn an .iso image to a CD. Create a folder on your computer to DL Digital Dolly to. Unzip DD in the same folder. Te create a bootable image.Use the Drive Image feature in DD to copy all the information From drive C:\ to D:\.MOD: Cleaned up mispelled word and poor sentence structure (Like you can see a difference).

8 more replies
Answer Match 45.78%

I have a HP Ency Phoenix -810-160 that had a dead HD. I got a good deal on a SSD and thus replaced the drive. When I attempted to run the recovery disks, I ran into the issue that I kept getting a Hard Drisk Error blue screen at start up.  I found it odd so I took the drive and tested it on another computer. No issue. I've now been able to install windows 8.1 back on it and even upgraded it to Windows 10 before the deadline but I still get the blue sceen error.  All tests pass for both memory and the hard disk. System also runs fine with the exception that when I start up the computer there is a massive delay, then I get the Hard Disk Error, If I just F2 kit and then close and continue, the system finishes to start up.  I think I may be having a firmware issue but HP Assist is installed and all updates are suposed to be running.  Anyone outthere running into a similar issue? I feel like I'm having a false positive since I went up to a Solid State Drive. 

A:Hard Disk Error but Hard Disk fine

How much capacity, in GB, does the SSD have? Less than 256GB is unlikely to work with the recovery media.

1 more replies
Answer Match 45.78%

Hi fellas, this is my first post here and I hope one of you can sort me out.

I've basically just replaced the HDD in my Dell Inspiron 17R Laptop. that was the easy part. Now I have to get Windows working again, without a backup CD or USB and using an OEM product key.

I've done some research and as far as I can tell its not possible for me to use someone else's computer to create one of these, and I have no access to someone elses copy of win so I'm thinking of downloading windows 7 as a free trial of some sorts or a digital river copy thats still available for download, use this as a temporary OS until the Boot disks arrive from Dell (ordered yesterday and will take up to 30 days to arrive).

Am I right in thinking that this i the best way to go? And can I make a USB flash using a Mac? It's the only laptop I have available to me at the moment.

Many thanks and much appreciated!

A:Trying to install Win7 on replacement HDD with OEM product key and no boot disk/usb!

Hi and welcome to TSF could you not have cloned the old drive.
Digital River links are as far as I 'am aware all down.
You could use Ubuntu or one of the many other linux distros as a temporary step.
The Best Linux Distros for First Time Switchers from Windows and Mac

5 more replies
Answer Match 45.36%

Hello,I need to replace the hard drive in my laptop HP Notebook  P1A99UA#ABL.What size and specs of the hard drive I should buy?Thanks a lot.











Solved!
View Solution.

A:Hard drive Replacement

Hi, Your machine is an  HP 15-af148ca :      http://support.hp.com/hr-en/document/c04791384 Would you like to use the same as the original HDD, which is a 1TB 5400RPM hard drive  ?  You can use any standard 2.5" HDD for laptops on the market today. Please buy a faster HDD which has 7200RPM and big cache such as     http://cplonline.com.au/hard-drives/laptop-hard-drives/seagate-st1000lx001-1tb-laptop-sshd-w-32gb-nand-2-5inch-sata.html or much smaller cache:     http://cplonline.com.au/hard-drives/laptop-hard-drives/hitachi-2-5-1tb-sata3-7200rpm-laptop-hard-drive.html Regards.

3 more replies
Answer Match 45.36%

Hello,

I have a 40gb hard drive that has the OS on it. I am close to maxing it out and want to replace it with an 80gb hard drive. Is there a way to copy or clone the drive so I do not have to re-install everything? I have an external hookup to connect the SATA drive.

Thank you.

-Kevin
 

A:Hard drive replacement

9 more replies
Answer Match 45.36%

I have a Pavilion a6202n with the factory hard drive, a KINGSTON SV300S37A12 SCSI Disk Device.  Can I still get this same hard drive or is there a compatible upgrade for it?  if so, where can I look? Many thanks

More replies
Answer Match 45.36%

We have several systems that are not likely to be replaced within the next ten years. The use a dos os and the file structure uses less than 100 MB. We use the 3 1/4 floppy for backup and communicate through the com port to make backups of the db. I have a thought to replace the ide hard drive with a flash drive. Is there an adapter that would allow you to use the ide port on the mother board to plug in a usb drive? There are probably some connectivity issues with bootup that but can probably be addressed by booting from floppy, or even by placing the right files on stick. Any thoughts?
 

A:IDE replacement hard drive

What are these DOS systems used for? Some sort of monitoring of equipment? There is probably no provision to boot from an external device on these, and I don't think they can be made to boot from anything but a internal hard drive or Floppy
 

7 more replies
Answer Match 45.36%

I have a Compaq Presario 1260 laptop with Win98 and a 4gb Fujitsu IDE hard drive. I need to replace the hard drive. Can anyone tell me what I need to look for in my new hard drive to make sure that it is compatible with my computer (ie Capacity, Physical Size, interface, etc)?
 

A:replacement hard drive

I have a Compaq Presario 1260 laptop with Win98 and a 4gb Fujitsu IDE hard drive. I need to replace the hard drive. Can anyone tell me what I need to look for in my new hard drive to make sure that it is compatible with my computer (ie Capacity, Physical Size, interface, etc)?

If you are running win98 you shouldn't have a problem with any size hard drive, other than that you will just need to make sure you get a IDE interface HD. For Physical size generall you will just have a 3 1/2 drive that should fit. However sometime Compaq uses 5 1/4 drives for there newer ones. Just take a look inside the case for the physical size.

[This message has been edited by TechGuy (edited 02-13-2001).]
 

2 more replies
Answer Match 45.36%

I wanted to get a ASUS G53SX series or ASUS A53SV series laptop. All the specs looked real good but the hard drive only runs at 5400rpm.
I was wondering if ASUS laptops could have the hard drive easily replaced so I can grab a 7200rpm hard drive at a cheap price and replace it.
If so, what "numbers" for the new hard drive do I needa concentrate on besides the RPM and the GB.
 

A:Hard Drive Replacement

15 more replies
Answer Match 45.36%

Hello,
Please could somebody help me with my probelm. I took my hard drive out of my Dell Inspiron 530s as it was full and took ages to load so wanted to buy a new one, of course not making any backup ha. Once i buy a new harddrive, what software would i need to buy to make my PC run as normal again. I was running with Windows Vista before, so what Software package do i require as the only ones that i seem to find are upgrades of which is no use as im starting from scratch as such. Do i need to make a boot disk first?
 

A:Hard Drive Replacement

6 more replies
Answer Match 45.36%

I have just bought 1Tb hard drive for replacing my old one 250gb. I want to keep all data I have on my old (still working) hard disk. If someone can help me what to do, I will be very happy.
 

A:hard drive replacement

11 more replies
Answer Match 45.36%

Adding a new boot drive on my father's computer. Used the Maxblast software that came with the Maxtor 120 G. Everything worked fine except I noticed that the software had partitioned the drive into four equal sections--the same situation that had caused the need for a larger drive because the sections not located int he boot partition were not easily available. So I reformatted the drive into only one partition but then the copying from the original boot drive could not be completed (many attempts). So I partitioned it back into several partitions, everything copied as intended, but now it asks for some command something or other at C prompt. Will not boot windows 98.
I've tried reinstalling O/S, recopying original boot drive--nothing works. Somebody help me please.
Thanks-
dionski
 

A:hard drive replacement

8 more replies
Answer Match 45.36%

I have a HP 15-P199SA running Windows 10.  The laptop will not start. System test stops with a Hard Drive DST Check : failed.  FAilure ID : M37S3F-7R6874-MFPV6K-60R403.  I believe I need to replace the hard drive, the laptop is out of warranty. Can you suggest a suitable replacement? TY

More replies
Answer Match 45.36%

if i wanted to replace my laptop hard drive how would i find out what model to replace with

like how do i know if mine is sata pata ide etc i took it out earlier and it didnt really say much on it i measured and it is

W 70mm x L 100mm x D roughly 8mm (i say roughly as it had a metal cage screwed to it)

and pins it had

a group of 15 contact points
then
a group of 7 contact points
then
a group of 4 pins

also thought worth mentioning
(i was under the impression laptops had 2.5 inch HDDS this was nearer 2 3/4 inchs ? )


thankys anyone who can provide any help/info on this

much apreciated

A:hard drive replacement

Speccy will tell you more than anyone wants to know
Speccy - System Information - Free Download

30 more replies
Answer Match 45.36%

I recently checked in the HP website is possible to upgrade your hard drive and I would like to change my HP mini 1104 laptop for 1TB hard drive because the original one is practically full and I believe this is the best option. I tried to contact HP store parts sellers and they mention I need to check if the conexion is SATA or IDE and I have not idea and I am not intending to open the laptop as yet. I also tried HP store email and somebody wrote me this: HP Mini 1104 (ENERGY STAR) (A7K66UT), the PC supports the following hard drives: 320 GB, 5400 rpm, 9.5 and 7.0 mm 250 GB, 5400 rpm, 9.5 and 7.0mm                                                                                                                This have confused me because I saw in amazon they have 1TB for my model and the photo says it is SATATSM 2.5 LAPTOP HARD DISK DRIVE FOR HP MINI 110-1000 110-1100 110-1200 110-3000 110-3100 210-1000 1104 1tbI have the... Read more

More replies
Answer Match 45.36%

Can anyone help with this   is the seagate st1000dm003 3.5inch 1TB barracuda hard drive compatible with my pc

More replies
Answer Match 45.36%

I want to replace the SATA HDD in my Dell Dimension 4700 with a larger SATA drive, but I don't want to start from scratch because I only have the Dell restoration WinXP Prof CD, not the retail version. Is there a way I can "clone" the present drive? What hardware and software would I need? I once did this with Maxtor IDE drives, using Maxblast. But I think that only works with Maxtor drives. I haven't yet bought the HDD, so I don't know what brand I'll be dealing with. Also, there's only 1 SATA connector inside the computer, so I guess one of the drives will have to connect via USB. Any help here will be appreciated. Thank you.
 

A:Hard Drive REplacement

8 more replies
Answer Match 45.36%

I want to replace the 2.75" hard drive in an old IBM Thinkpad laptop. The replacement drive, however, is thinner than the original so there is a problem aligning the pins with the holes in the drive bay connector.

Has anyone had this problem? Exact pin alignment is critical. Is there a commercially available adapter shim that will solve the problem or should I try to make one?
 

A:Hard drive replacement

By any chance, does your old HDD have a metal casing?
If so, remove that case and put the new HDD in it.
It is highly unlikely that a newer drive would be thinner than the old.
 

2 more replies
Answer Match 45.36%

Hi, I have a hp omnibook xe 4100 and the hard drive has packed up - (ticking) the model of the hard drive is a ibm travelstar ic25n020atcs04-0 and is only 20gb

i can purchase the same one but they are expensive for such a little hard drive

Can i change the hard drive for a totally different model or do i have to keep it the same?

Also how do i find out the type of hardrive it is as others i have seen do not have this type of connector?

thanks for your help
 

A:Hard drive replacement

Yours is a standard PATA drive using a standard 44-conductor PATA connector. It is a given the system will handle a drive as large as 137 Gigabytes; but, it may go even higher depending on whether your board and OS supports 48-bit addressing.

Just be sure you get Parallel ATA (PATA) as opposed to Serial ATA (SATA). The connectors are very different. You'll need a drive with a 2.5-inch form factor.

http://www.newegg.com/Product/Produ...Subcategory=380&description=&Ntk=&srchInDesc=

As you shop, pay attention to the fact that you can usually get a drive with a three-year warranty for just a very few dollars more than the cheapest on in the list. Example: This drive for $55 carries a one-year warranty while this one for $60 carries three and this one for $60 carries five years.

Sometimes the warranty periods aren't listed on the dealer's web site and you have to get that information on the manufacturer's site. All Western Digital Scorpio drives carry a three-year warranty while Seagate's Momentus drives carry five years. Most drives carry only one year so if you shop smartly and pay just a very few extra bucks, you get a far better warranty.

Another consideration: I would be careful about getting fooled into buying an extended warranty on a hard disk from a dealer. I have a lot of first-hand experience that the replacement procedure from Seagate, Western Digital, Maxtor, Toshiba and Hitachi and they are all fast and relatively trouble-fre... Read more

1 more replies
Answer Match 45.36%

Folks,
I want to replace my hard drive. It is a Toshiba 80GB, HDD2D32, MK8032GSX.

I was hoping to find one on a big site like Amazon or maybe even Toshiba. No joy.

I have found them for sale on small sites that I've never heard of and I'm not sure what I will be buying.......is 'new' really new or some sort of salvaged part.

Question: Is there any websites that give a substitute drive of known quality, eg: Seagate?
I'm assuming that if the physical size and connector pin layout is correct then I should be able to use any manfacturer?

Thanks
 

A:Hard Drive Replacement

Newegg.com or Outpost.com are good places to start. I think that drive is a SATA drive for a laptop, so you'll need a 2.5" laptop SATA drive.

If you need to clone your existing drive to the new drive, you will also need a USB to SATA cable to clone the data. Or if you have a desktop with available SATA ports, you can clone the drive from the desktop.

Otherwise you can do a fresh install with you notebook install discs.
 

2 more replies
Answer Match 45.36%

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) XP 1700+, x86 Family 6 Model 6 Stepping 2
Processor Count: 1
RAM: 751 Mb
Graphics Card: S3 Graphics ProSavage 8A26 (Microsoft Corporation), 16 Mb
Hard Drives: C: Total - 39189 MB, Free - 22520 MB;
Motherboard: MicroStar Inc. , MS-6511 , 1.0 , 00000000
Antivirus: AVG Anti-Virus Free Edition 2011, Updated: Yes, On-Demand Scanner: Enabled

I suppose I should know but.......
My hard drive needs replacement
I am told I need to ensure the replacement is ide? and should be compatable with the motherboard
Can anyone advise the biggest drive I could buy without having problems I was hoping to get one about 500gb but will that give me any problems? My friend says he will install it but the responsibility is mine to get the right one. I would be very grateful for any information or recommendation as to product.
Thank you
 

A:hard drive replacement

You can look thru Here ... I only see one 500gig.

And welcome to the TSG Forum
 

3 more replies
Answer Match 45.36%

I would like to replace my 15g hard drive with a 80g one... i don't wand to have a slave just one drive with everything on it. Can i Copy everything from my current drive onto the new one with out reinstalling xp and everything esle?

if someone can tell me how i would really appreciate it. thanks
 

A:Hard Drive Replacement

9 more replies
Answer Match 45.36%

I need to replace the hard drive on my laptop.  The hard drive type is ATA, model- Toshiba MQ01ABD050, Serial Number 627JP0k1T, capacity- 500 GB. My laptop model is hp Envy m6. I would like to replace with 1TB hard drive, if its possible to replace the 500GB with 1TB hard drive, how much will it cost?











Solved!
View Solution.

A:hard drive replacement

Hi, An example of what you're looking for is on the link below. https://www.amazon.co.uk/Toshiba-MQ01ABD100-5400RPM-9-5mm-Internal/dp/B009AYVNMQ?ie=UTF8&keywords=toshiba%20mq01abd100&qid=1413837867&ref_=sr_1_1&sr=8-1 Regards, DP-K

4 more replies
Answer Match 45.36%

I cannot find the access point/cover to the hard drive in my Toshiba 2515CDS
My replacement hard drive has arrived, and I feel pretty stupid, BUT, my
owners manual does NOT address this location. It shows every possible
detail for the top/bottom/front/back/and both sides, but NOWHERE is the
hard drive access cover shown. Can someone HELP???
Thanks alot!
Ron
 

A:Hard Drive Replacement

See if you have any rubber feet on the base of that laptop. Remove the feet, and find your screws (most likely).
 

2 more replies
Answer Match 45.36%

Hi, I need to replace the hard drive on my son's Pavilion 15 lap-top. Can anyone recomend what I need to buy. I dont have a back up cd so presumably i have to re-load windows etc as well ? Thanks very muchAde











Solved!
View Solution.

A:Which replacement hard drive ?

Here is the Service Manual: Manual Supports 6.35 cm (2.5 in) hard drives in 9.5 mm (.37 in) and 7.0 mm (.28 in) thicknesses (all hard drives use the same bracket) So that confirms it will accept the one I linked in the post above.  Unfortunately, hard drive removal is a bit tricky. Start on p. 85 of the manual which shows how to remove the top cover.  You can skip over the part about removing the screen and jump to p. 105 for the hard drive.  This series of pictures will also likely help: http://www.myfixguide.com/manual/hp-pavilion-15-p000-disassembly/ If this is "the Answer" please click "Accept as Solution" to help others find it. 

5 more replies
Answer Match 45.36%

I am working on a friends Toshiba Satellite P75-A7100 laptop. His hard drive crashed. Connected hard drive to my PC and cannot access it. My friend has no disks or backups. I will need to replace the hard drive. Having said this, I have a couple of questions to start with:

1. I see no COA sticker on this laptop. I'm not sure about how to activate once 8.1 is loaded.

2. Where would I get 8.1? Is there an iso download and where to get a good one?

More replies
Answer Match 45.36%

I received a SMART error, warning me to change my hard drive a failure may be imminent. So I need to change my hard drive and need some info.
I have a HP Pavilion 6460 system, running windows 98.
My current hard drive is: Quantam Bigfoot TS9.6A (pm)
Secondary master: CD-532E-B-(sm)
Install Memory: 96mb
Memory Bank 0: 64 mb SDRAM
memory Bank 1: 32 mb SDRam
Legacy Diskette A: 1.44 mb 3 1/2

According to HP support I need to purchase a drive with the same or more and I would like some opinions on what drive to purchase...what drive will work ie: # of pins etc. What is the best for the money etc. Thanks allot!!!!
 

A:Need hard drive replacement help

9 more replies
Answer Match 45.36%

my hard drive is getting rather noisy it makes grinding noises when ever i open an application so i think its time for replacement, i have and external hard drive which is 640 GB is there a way i can remove that one so i can use it in my PC and also will it last as long as an normal hard drive,

The external drive is a simple tech 640 gigabyte desktop external drive, i cannot for the life of me figure out how to open this damn thing so if i can able to use this in my PC how do i open it ?

please respond asap thanks
 

A:Hard drive replacement

8 more replies
Answer Match 45.36%

Hey gang

Last week my "d" drive went south for the winter.
Thats all right I told it to stay there and I'm getting another from Maxtor under warrenty.
Since I'm not the local hardware-man is there anything I should know before I mount the thing in, hook it up, and put the power to it?
Right now my OS knows its not there and doesn't display it anywhere, but do I need to do prep work before surgery?
 

A:hard drive replacement

6 more replies
Answer Match 45.36%

Hi, I was wondering, if I got a new 500gb internal drive cause my old one is bad, would I be able to transfer everything (Including my seven install) onto the new drive? and if yes, how would I go about doing so?

A:Hard drive replacement

Attach the new one to your system, then run some software like Norton Ghost to copy the old drive to the new one. Remove old drive after.

6 more replies
Answer Match 45.36%

I have to buy a new hard drive for my desk top. The one that was in it was a Seagate Barracuda 3.5" 7200.12 1TB ST31000524AS. I broke the plastic on it where the power or data cord plugs in, so it won't work now.

I want to replace it with a 2 Seagate Hard drives, a 1TB & a 2TB so I can back up on one. My motherboard is a MSI A75MA-G55 & I know it will accommodate more than one hard drive, possibly more than 2, I'm just not sure how to install them in sequence. Would I be better off to buy a 2TB hard drive & and external drive for backups?

How important is the rest of the info on the hard drive, such as Site Code, Firmware, etc. I want to make sure that I get the right replacements that are compatible.

Also, I hope to be able to install Windows 7 & I have an ISO file that I put on a flash drive. Not sure how to install Win 7 on a new hard drive b/c I have no idea how it will find the other info on my computer.

Older data regarding my PC (current updates not showing, etc.) can be found here: http://speccy.piriform.com/results/Q...2IIVHBanlZexZN

How important are the #'s on a hard drive when buying 2, possible a 2TB & a 1TB, or maybe 3 to put my operating system on a separate hard drive.

I don't see how a clean installation on Windows 7 will find all the items in my device manager....can't see how this works with a new install. So, after installing new hard drives (1-3) &/or an external drive for backups, I don't know ... Read more

A:Hard Drive Replacement for PC

You would be better off getting one HDD to put in your computer and an external one for your backups (actually two external HDDs for backups would be much better since even a backup HDD can fail without warning but only one is better than none). The external HDDs should be connected to your computer only when updating the backups; they should not be permanently connected.

Using an internal HDD for backups is a bad idea because the same thing that can cause data to be lost on the main drive can also take out the data on an internal backup drive.

If you can swing it, I prefer using the Western Digital (WD) Blacks for internal drives. WD has a better reputation than Seagate for drive reliability and customer service. I've had only six Seagates; two died within a year and a third, a SSHD, was a disappointment performancewise. Of the 23 WD drives I've had, only two have failed; one other one arrived DOA (which could have been caused by rough handling in shipment), which the vendor promptly replaced and now is humming away in my machine happy as a kitten under a leaky cow.

If you are going to run your OS and programs on a HDD, I wouldn't get a third one; you can just put them on a partition on your one internal HDD separate from a data partition. The only way I would recommend a separate drive for the OS and programs is if you were going to upgrade to an SSD. An SSD will give you lightning fast boot times and program access and is an upgrade that will give you more bang for y... Read more

9 more replies
Answer Match 45.36%

need to replace the hard drive serial # [personal information removed] in my Envy touchsmart 17t-j100.   Can't afford sata right now.  Any suggestion to where I can purchase one compatible to the original.  This is a 1TB 5400-rpm.











Solved!
View Solution.

A:Replacement Hard drive

terfig wrote:..... Can't afford sata right now. ...Hi, You MUST use SATA, no choice. Probably you are talking about SSD. There are many standard HDD's around. I bought one of the following HDD's last week to test few things - much cheaper elsewhere    http://cplonline.com.au/hard-drives/laptop-hard-drives/2-5-seagate-1tb-with-8g-mlc-seagate-momentus-xt-laptop-hdd-st1000lm014.html   http://cplonline.com.au/hard-drives/laptop-hard-drives/seagate-st1000lx001-1tb-laptop-sshd-w-32gb-nand-2-5inch-sata.html You can buy Toshiba, WD, Hitachi, ... Regards.

4 more replies
Answer Match 45.36%

Help, I replaced me hard drive as the one in my system was bust so unable to make a recovery disc.
I replaced it with a new hard drive but have problems loading Windows 7 from the disc which is an upgrade.
The system was originally running XP, I do have an XP disc but it is also an upgrade, Is there anything I can do to get this up and running again, As is probably obvious, I am a bit of a novice in this field. Any help would be welcome.
 

A:Replacement hard drive

12 more replies
Answer Match 45.36%

Hello,
I'm new here and I hope someone can help me. I was working on a friends computer. She had a ton of spyware, malware and trojans that needed to be cleaned out. It's an IBM Netvista 2276, Celeron [email protected], 128MB Ram, 10GB hard drive,CD-ROM, running WindowsME. After getting it all cleaned out, I turned it off. Went to boot up the computer this morning to install anti-virus and the hard drive crashed. Not recognized in BIOS...no sound...nothing. I tried all day, but it's definitely gone. Can anyone tell me where I can get a replacement hard drive that is compatible with this computer? I've searched IBM, shopping websites, etc. I'm worried about buying something that won't work in this computer (not made of money here!) I'm trying to absorb a crash course on hard drives, but I need to get one for this computer NOW! Thank you so much for any help!
 

A:Hard Drive replacement?

8 more replies
Answer Match 45.36%

I am replacing a hard drive. I have it installed and it is recognized in the system setup. When I install the "system recovery" disks, I get "invalid system drive. Please replace and hit any key." The CD drive light is continually on. Any suggestions?
 

A:hard drive replacement

11 more replies
Answer Match 45.36%

I have actually never done a hard drive swap and a full restore. I was wondering if you all could help me out heres what i want to do.

I have a full entire backup of all files on my computer. (took like 6 hours to backup)
I want to take the 2 tb hard drive ive purchased and hook it up by sata and remove the old hard drive then restore my computer back to as if it were exactly the same without anything changing.
Questions,
1. )do i have to backup my registry in a different way than windows 7 backup utility.
2. )will i lose any data throughout the process and will all applications including games and everything on the drive function correctly?
*note i am not changing any other hardware in the machine just simply swapping the hard drives.*

thanks, let me know what i need to do to make this happen

A:Hard drive replacement

You say you have a "full entire backup".

What do you mean?

An image of your C partition?

A file by file backup of all files on the C partition?

Something else?

You don't have to separately backup the registry.

What application are you using to make this "full entire backup"??

Whether you will lose data or need to reinstall applications depends on exactly what you are doing and we don't have enough info at this point.

7 more replies
Answer Match 45.36%

1. I have an old Dell, model OptiPlex GX60. It has a hard drive of this designation: WDC WD400BB-75FJA1. It's a 40gb size.

The hard drive is failing. I'd like to replace it.

How do I know what kinds of hard drives may be good substitutes here? Might go to a 60gb. I have expanded my RAM.

I'd like to know what kinds of hard drive I could replace it with. General descriptions would be good.
2. Is it as simple as pull the old one, stick the new one in, and go to F12 in Dell OS menu, then load windows in?
 

A:hard drive replacement

16 more replies
Answer Match 44.94%

where can I get a replacement hard drive for my notebook HP G60-530US.  It is out of warrenty by a few months. Where do I look and what do I look for. Are there identifing numbers on the original HD to look for. Thanks in advance for any help











Solved!
View Solution.

A:need Hard disc replacement for HP G60-530US

Hi, I don't see any reason why a 7200 RPM hard drive would not work.  I put SSDs in both of my latops and didn't have any issues.  One SSD needed a firmware update but otherwise no issues. You might want to double check the size of the hard drive to make sure that a standard 2.5" laptop drive will fit inside the hard drive caddy.

6 more replies
Answer Match 44.94%

Hello, I have a Latitude E5520 which has been hanging at srartup with a Startup Repair that is going on for ever. I run the ePSA diagnostics and got the Error Code 2000-0142 with validation 14116, which means the hard drive is not working properly and should be replaced. This part is covered by my warranty and eligible for an automated dispatch. So all I have to do is fill in my shipping info. BUT I don't have an OS CD. I see you provide online all the drivers etc., but I am worried how I would be restoring the system with the windows 7 OS without a CD, or a restore CD. Is the replacement hard drive equiped with the restore the OS option? Or it comes totaly blank?
T.I.A.

A:Hard Drive replacement and OS restoration

You will also need to request Restore Media since you are still under warranty.

14 more replies