Tech Problem Aggregator

HP ProBook won't turn on

Q: HP ProBook won't turn on

Hello everyone, So i have a problem with my HP ProBook 4320s, it won't turn on. Here's whats happening when i try to turn it on. When i have the battery in without the recharger and i try to turn it on, the orange LED light for the recharger blinks 8 times and same when i have battery in with recharger plugged in. Note, the orange LED light should stay on when recharger is plugged in and it's recharging the laptop. Now, when i have the battery out and the recharge plugged. The orange LED light doesn't even turn on at all. Now here's what i have done. I did a hard reset, which i unplugged the recharger and removed the battery from the laptop. I then held down the power button for 60 seconds and after that i plugged in the recharger without the battery and attempted to turn on the laptop. Nothing happens and the oranged LED light doesn't turn on. I then left the recharger plugged in and this time inserted the battery. The laptop still won't turn on but the orange LED light blinks 8 times. Now i've tried this with 2 different recharger and same result above. I can confirm that the 2 recharger is working because the 2 recharger works with my other HP laptop, meaning it was able to recharge my other HP laptop. My other HP laptop also shares the same recharger as the HP ProBook 4320s by the way. What i've also done is, i've opened the HP ProBook laptop, took out the RAM and reinserted the RAM and tried the above and same result. I did this because someone told me this could've solve my problem but it didn't. I don't know what to do now to get this problem fixed. Can someome please help me?

More replies
Answer Match 56.7%

my hp probook g3 440 i3 won't turn on











Solved!
View Solution.

A:my hp probook g3 450 won't turn on

please anyone help how can I turn on my probook???

2 more replies
Answer Match 56.7%

Left it charging alnight as wouldn't turn on. Tried taking out battery holding down test button for a while reconnecting power corl and light flashes briefly even with battery in again. Help!

More replies
Answer Match 55.86%

I have a new ProBook 4540s notebook that I shut down over the weekend. I am not sure if I put it into hibernate, sleep, or what as I am still getting use to it. When I tried to turn it on (not plugged in) I got nothing. So I plugged in the power cord and hit the power button again. All it did was the LED above the cord plug blinked about 8 times and nothing else. I let it "charge" overnight and tried again in the morning. Nothing but a blinking LED. I Googled the problem and it said to take the battery out, unplug, and hold the power button down for 20 seconds. I plugged it back in but left the battery out, and still the same thing - flashing LED. HELP! Thanks.

A:My new ProBook 4540s will not turn on

Hey SBProBook,Do any other LEDs blink? Take a look at this document and let us know if you see any matches to these patterns:http://support.hp.com/us-en/document/c01443366




___I am an HP employee.? Say thanks by clicking the 'Thumbs Up' button on the left? Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution' if it solves your issue

3 more replies
Answer Match 55.86%

Hi, I recently got a new laptop which is a HP Probook. I cant turn the brightness up on my laptop and I dont know why. I hold down the FN button and press F6 but it doesnt turn the brightness up. I am sorry if this is a silly question but I really need help (also I know you have answered this question before but it didnt help with my problem) If you could reply soon I will be very thankful.  It also doesnt have anything to FN because I can do eveything else becasue turning up the brightness -Catulus(Sorry for any silly spelling mistakes )

More replies
Answer Match 55.86%

Hello, I have recently received a second-hand HP Probook 5310m from a mates workplace. I am currently trying to fix a problem about the charger not charging the empty battery, It will not show any lights (Charging, Capslock or the power button light). Please help me! 

More replies
Answer Match 55.86%

hi i have hp probook 4340s with i5 3230m  Laptop does not work , and now it will not turn on . When inserting a battery or charger cpu fan starts 3 seconds and turns off...until I unplugged . There is no indication on the computer , I tried to do everything what it could be ? thnks

More replies
Answer Match 55.86%

Hi, I recently got a new laptop which is a HP Probook. I cant turn the brightness up on my laptop and I dont know why. I hold down the FN button and press F6 but it doesnt turn the brightness up. I am sorry if this is a silly question but I really need help (also I know you have answered this question before but it didnt help with my problem) If you could reply soon I will be very thankful.  It also doesnt have anything to FN because I can do eveything else becasue turning up the brightness -Catulus(Sorry for any silly spelling mistakes )

More replies
Answer Match 55.44%

Dear Support, How can i turn on Numlock automatically on boot? On my previous model ( 6560b ) this could be done by BIOS option. I halve also done this numerous times on the HP Probook 650 G1. Unfortuneatly i cannot find this option in the systems firmware/BIOS. Thank you in advance. Dirk

More replies
Answer Match 55.02%

I would like an option to turn it on/off without uninstalling. Any help would be most appreciated.  Thanks.

A:I would like to turn ofthe TouchPad on my ProBook 4730s. Sh...

there might be two settings that can help you: not sure if yours has the double-tap upper left corner to enable/disable, but you can try that. also, maybe has the setting to disable the touchpad if an external device is connected.




"There's no such thing as a fool proof system. Someone will make a better fool tomorrow."

3 more replies
Answer Match 54.18%

The led near charging port white. Laptop isn't turning on. When i connect the charger nothing changes, it remains white(stable not blinking). When i remove battery and charger no led. If i just plugin in charger without battery then same white stable led on charging port. What could be the problem? Laptop was working fine few hours ago. Its hp probook 4540s

More replies
Answer Match 53.76%

Hello !!I think I'm in real trouble.i will explain what happened.I was updating my drivers from hp website , noticed that there was bios update for my probook...mine was F41.0 and available update was F61.0....i thought i should better update as i used to update it before.So whole downloading F61.0 there was option for Windows 8.1 and i had installed Windows 10 aniversary update....i thought that HP didn't add the windows 10...this is the latest bios it must be compatible with Windows 10 too.So after downloading it selected the option to initiate bios update on this system.Everything happened good it first backed up my current bios and then installed new one.After installing bios utility asked me to reboot the laptop i selected yes.And while rebooting mycaps lock light blinked 2 timesPower button and wifi light 1 or 2 times may be (i dont remember exactly )And after that laptop went off.Aftee waiting a few minutes i thought update is complete and i need to turn the laptop on now.So i pressed the power button and there was nothing.Not even a fan noise or hard disk noise or dvd rom noise.Let me explain what happens when i press the power button.Led of power button , wifi button and harddisk turns on for a second and then it is off again.I hear nothing, no fan noise no harddisk noise almost silent.Same thing happens when i press the power button again and again and again and again.Solution i have tired already:Take out batteryPress and hold power button for a minuteConnect ac so... Read more

More replies
Answer Match 34.44%

I have a bit of a strange issue with my computer. Forgive me if I'm a little too descriptive, but I'm not sure which details are relevant and which are not for such a problem. First, the specs:

Model: eMachines T2984
Operating System: Windows XP Service Pack 2
Processor: Intel Celeron D Processor 340, 2.93 GHZ, 256K L2 Cache, 533 MHZ FSB
Power Supply Unit: Bestec Model: ATX-250-12E REV: P7
Motherboard: I can't tell, but it appears to be an Intel motherboard by the number of Intel labels on it
RAM: 512 MB DDR SD originally, added 1 GB a couple of months ago
Let me know if you need anything else...

Yesterday, I got home from shopping around 1PM, and I tried to start the computer. I pushed the power button, and nothing happened. I checked all of the cords, and they were all plugged in. Not knowing what else to do, I opened up the case to see if there was something obviously wrong. The only thing that I noticed (other than a bunch of dust) was that the power supply unit was still hot. I shut the computer down about 5 hours earlier after about 20 minutes of use, so it seemed strange that the power supply was still hot. I unplugged the computer just in case there was some sort of fire hazard.

At this point, I called a friend who suggested that the problem might be with the motherboard or the power supply unit.

A few hours later, I plugged it back in to try to get it to work. As soon as I plugged it in, the entire unit suddenly started "running" by itsel... Read more

A:Computer Doesn't Turn on, Fans and Some Lights Turn on Automatically

I would suspect that the Power Supply Unit (PSU) is going south. If you have a spare one laying around, install it and see if the problem goes away.
You can buy a new,better PSU from Newegg for about $40.00. I have used a Thermaltake 430 watt in one of my machines for some time now and it works well.
You will have to check the size of your PSU to be sure a new one will fit into the eMachine.
Here's the page with that PSU on it. It's the last one on the list.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010320058+50001379&name=Thermaltake
 

3 more replies
Answer Match 34.44%

Hi

I have configured ad-hoc network for internet sharing from my PC. Normally I start it by
netsh wlan start hostednetwork
As I noticed the hotspot is automatically turned off when I turn off WiFi adapter. So I have two questions:

How do I turn on WiFi by command line, so that I can control it from various commandline scripts?
How do I configure the script for WiFi for autostarting hotspot whenever WiFi is turned on?

netsh wlan ...

A:How to turn on WiFi adapter from command line / How to turn on hotspot

  
Quote: Originally Posted by Anakunda


Hi

I have configured ad-hoc network for internet sharing from my PC. Normally I start it by
netsh wlan start hostednetwork
As I noticed the hotspot is automatically turned off when I turn off WiFi adapter. So I have two questions:

How do I turn on WiFi by command line, so that I can control it from various commandline scripts?
How do I configure the script for WiFi for autostarting hotspot whenever WiFi is turned on?

netsh wlan ...


Ad-Hoc requires that you restart the session each time.

Connectify pro has an auto start option that does this but it's a paid version, connectify lite is free but I'm not sure if has auto start.

Download - Connectify

8 more replies
Answer Match 34.44%

Hi to all Eight forum.
I m here with a strange problem, it happens from yesterday, the problem is when I playing games on my Dell inspiron N4050 and then the main power where the charger pluged in is turn off (it is the most problem in my country that there is heavy short fall of power), the laptop is remain ON just for 2 or 3 seconds and then its suddenly OFF. its not happening before, why is that,? why is the laptop didn't get power from the battery.?
.
when not playing games. and the main power (electricity) is gone, then this problem is not occurred.
plz understand my problem and reply me.
sorry for my bad English.

A:Laptop suddenly turn off when main power turn off.

Could it be overheating protection?

16 more replies
Answer Match 34.44%

Running Windows Vista Ultimate.

Display turns off after about fifteen minutes regardless of whether I am actively using the computer or not. The only way to turn the display back on is to close and then open the lid. This disconnets me from AOL, so I have to sign back on again, and if I was emailing, I might lose my current email.

Under Power Options, I have 'Turn off the display' set to Never for both On Battery and Plugged in. Under 'Put the computer to sleep' I have both On battery and Plugged in set to never. Nonetheless, the display still shuts off while I am working.

What do I need to do to prevent the display from turning off at odd intervals?

A:Vista Ultimate x64: turn off display, will not turn back on

sounds like your display drivers are crashing.

Do not rely on windows update drivers - go to graphics chipset manufacturer website and get latest drivers

6 more replies
Answer Match 34.44%

Hi All,
 
I am using Windows 8.1 and had to refresh my computer as I was experiencing some problems. Everything seemed to be normal so I started slowly installing the programs I had before. Now a few days after, I find that my wireless device is Off and Flight Mode is On. I have been in settings but the relevant switches are disabled.
Can anybody tell me how to fix this please ? I really don't know how it happened. Can it be that my laptop is still infected ?
 
Thanks,
Robert

A:Turn Off Flight Mode & Turn On Wireless Devices

Is there a physical switch on your laptop for wireless? Often on the edges of your laptop... easy to miss.

7 more replies
Answer Match 34.44%

I just put together my first computer 6 months ago. It abruply shutdow in the middle of writing a paper for school. I couldn't turn it back on right away. after trying a few times, it turned on. All the fans are working even the fan on the power supply, the motherboards lights are on. My graphic card in on the motherboard. I think it might be my power supply because when I first put it together I didn't plug in the smaller power connection to the motherboard and the same thing is happening, black screen. It's like my computer isn't giving my monitor any feed. I will have more info when I get home. I can't get in to bios or safe mode.
 

More replies
Answer Match 34.44%

Hi!
I have this issue that when I turn on my computer, the power LED does not turn on but you can hear the fans working properly. I don't the issue and I'm not much of an expert with computers. Please help me solve this issue because I'm completely clueless.
 

A:Try to turn on my computer but only the fans work and the power led does not turn on

How old is the computer, what was the last change you made to the computer and when you last shut it down did it shut down correctly?
 

3 more replies
Answer Match 34.44%

I can't turn my computer on. The fans and lights turn on for a second and then turn off. a few seconds later they'll turn back on and then turn back off. I've had this computer for 4+ months now, i built it myself. it recently started doing this but i'd just turn off the PSU (Power Supply Unit) and turn it back on and it woould fix it. now it doesnt fix it anymore. i've re-slotted the RAM (Random Access Memory) and pushed it in firmly, but that hasn't done anything. i've tried different power outlets and pushed everything into the MOBO (Motherboard), i havent messed around with CPU (Processor) because that's just a pain in the a**... i was wondering if there was anything else i could do before having to take it into a local repair shop, lol.

as for my computer specs

CPU (Processor): Fx-6300 AMD
GPU: R9-270x AMD
RAM (Random Access Memory): 8GB Ballistix sport
MOBO (Motherboard): ASRock 970 Extreme3 R2.0
PSU (Power Supply Unit): Corsair X500 w 80+
Case: Rosewill GALAXY

thanks
 

A:Fans turn on, lights blink and then turn off/on repeatedly.

First, I would unplug everything that isn't necessary. Everything external except for the keyboard and monitor. Internally, just leave the CPU, RAM and video card installed. See if it turns on. If not, you might try and test the power button. Disconnect the power button from the mobo. If the pin headers allow for it, use the reset button as the power button. If not, you can use a flat head screwdriver to power on the computer (cross the two pins for the power button with the blade of the screwdriver). If you do this, just be very careful. Touch only the power button pins and nothing else! You could easily damage components by touching the screwdriver to the wrong thing.

Some motherboards have a power button right on the board that you can press to power on the computer. I looked at a pic of your board and didn't notice one.

If that doesn't do it, plug the power button back in. You might try and play around with the RAM. I don't know if you have 2 or 4 sticks of RAM, but try and boot the computer with only one stick of RAM at a time. If there's a bad stick, you'll find it through this process of elimination.

If none of the above works, then it might be a bad PSU.
 

1 more replies
Answer Match 34.44%

Hello Microsoft team,
We need for an application to unplug and replug usb3 - not physically but with a program.
We checked a lot on the internet but did not find answer how to do it in windows 8.1 pro (in c++).
We know that hibernation creates something alike, but how can we only turn down the power of usb3 and return the power back on back via program (in c++).
Thank you for your help.

More replies
Answer Match 34.44%

This is driving me crazy. My HP has Windows 7 and everytime it connects to the internet (wireless connection) Windows Live Messenger opens down in the left hand corner taskbar near the start menu. I close it, and fifteen minutes later it will open again.
I opened the options and unchecked the boxes pretaining to 'Run Windows Live Messenger when windows starts' but it still repeatedly opens. I use hotmail, but i really have no use for Messenger. The program is not listed under add/remove programs. Someone please help me turn this thing off.
 

A:Solved: Windows Live Messenger-TURN IT OFF TURN IT OFF!

It should be listed in Programs & Features under Windows Live Messenger or Windows Live Essentials. If you still can't find it listed then go to get.live.com and re-download the installer, reinstall it, then uninstall it.
 

2 more replies
Answer Match 34.44%

Wife updated Norton twice and had two Norton Firewalls and Windows Firewalls running together. Paid twice for the 2 updates. Removed Norton Completely and then re-installed Norton 360 Security Version 5, but am still unable to turn off Windows Firewall under Windows XP Pro and also cannot turn on Automatic updates, getting message "we're Sorry, the Security Center could NOT change your Automatic Windows Update setting. To try changing these settings, go to SYSTEM in Control Panel. On the Automatic Updates Tab, select AUTOMATIC (recommended) and then click OK. None of this works, then tried using an app to reset Security Settings and that didn't work either. Any suggestions on what I try next. I would like to reinstall Norton 360 Internet Security Version 5, I know there are those out there that hate Norton and the overhead that comes with it, but over the years I've gotten used to it and I like it very much. Thank you, PhotoRay

A:In XP Pro can't turn off Windows Firewall or Turn on Automatic Updates

How did you remove Norton in the first place?

3 more replies
Answer Match 34.44%

Hello Folks,

I'm not sure if my issue is with hardware (possibly MB?) or graphics card, so please forgive me if I've posted in the wrong section. The first problem I was having was random blue screens of death that displayed graphic card driver issues. I was able to remedy that by updating my graphic drivers and have not had an issue since.

However, ever since then I have been running into another hardware or graphics-related issue that is random and completely stumping me. What is happening is, I will be on my computer, leave and turn my monitor off, and (randomly) when I come back to use my computer again, when I turn on the monitor there is no signal and a black screen (e.g. when I turn my monitor on my desktop will pop up and the light on my monitor will turn blue, when it doesn't turn on there will be a black screen and the light on the monitor stays yellow as if it is idle). I have tried swapping out the monitor to see if that was the issue and the same problem persists, so it does not appear to be my monitor or VGA cables.

The only way I can temporarily fix this issue is to reboot/restart my computer and viola! The monitor works again and I can see everything. This issue is very random. Sometimes I can go weeks without an incident, other times this is happening a couple times a week. I honestly don't know if it's my motherboard or video card or what. My PC isn't overheating, I'm not overclocking, and all of my drivers are updated.

I'm not sure what... Read more

A:Turn Off Monitor, Turn On Later and Black Screen, PC Still Running

try checking your power options settings and set it to high performance then check in advanced power settings and do not allow hard disks to sleep

1 more replies
Answer Match 33.6%

HI TO ALL:
im having a problem with my pc that i mostly used..heres the situation :
my pc is working fine suddenly 1 day it slows and slightly hanging so i restarted it after restart problem occurs it powers on(all running: fans,hdd,dvd rom,cpu fan)then after 2 seconds it goes off automatically.so then i open the case and reseated all components(i know some basic troubleshooting) i tried to power on again and same things happen turn off after 2 seconds. i remove the gpu and connect my monitor to the onboard, so it starts finally and get me to "loading windows "then it go black screen, i restart it again by pressing the restart button and i boot trough enable vga mode by pressing f8.then it boots and it loads the windows and i can use it normally only on vga mode..so i downloaded the latest driver of my gpu's onboard and external.i uninstalled the drivers through vga mode then restart,again loading windows then black screen,restart againd and boot through vga mode install the updated drivers then reboot,loading windows then black screen with some pixelate flickering cursor on screen. (to make it short it only boots on enable vga mode..then i go replacing my psu with working from another pc and same thing happened..so then i reformat my pc and didnt installed any gpu including the onboard i disabled it..and its working fine with that..

note* with my external gpu installed it goes off after 2 seconds it power on.
with my onboard gpu enabled it gives black screen ... Read more

A:Pc turn on and immediately turn off after 2 seconds(with external gpu)

10 more replies
Answer Match 33.6%

I want to discontinue use of McAfee (which came with the initial install) of my Windows 10 computer, and turn on Windows Defender.   I don't know where to start.

A:turn off mcafee and turn on defender in windows 10

Open the start menu. Select  "Control Panel". Select "Programs and Features". Find and select the McAfee program in the list then click "uninstall" at the top of the list. When it has finished uninstalling Windows Defender will activate itself.Go back to Control Panel again and select  "Security and Maintenance" . In the security drop down list it should say Windows Defender is turned on.

3 more replies
Answer Match 33.18%

Hi I just installed XP 32-bit SP3 on Broadwell-UBut need drivers for:1. Wireless Intel DualBand 3160 which like everytching is not supported for the 9th generation Chipsets.2. How to activate the system ? Someone help ? Big Thanks in Advance

More replies
Answer Match 33.18%

I recently purchased HP 430 G2 and I would like to add storage (SSD).Can you tell me exactly what type of connector has M.2 or mSATA?If it goes M.2 what type (ex. 2242-D2 TYPE-B-M)?Restrictions pertaining to the maximum space <512GB or <1TB?

More replies
Answer Match 33.18%

Hi, I recently bought a HP Probook 430 G2 and from the very first day the battery has said charging but it was not charging so I did a battery check with HP assistant and it said it was reporting a failure and needed replacing, and so I bought a replacement which arrived today and it has the same problem and hp assistant is giving the same result. Has anoyone had this porblem before or if anyone can offer any advice on how to fix this that would be much apprecaited.Thanks

More replies
Answer Match 33.18%

It was a great evening, watching a movie on my hp probook 450 G3 laptop. it warned of low battery-7% low, so i did plug it in and minutes later it just blacked. first ,i removed the battery, put it back and pluged it inot a power source but the light that indicates that it is charging didnt show till after some minutes but later after some minutes, it went off. the following day i did try putting it to direct power without the battery in and still it could not power on. Later on i did get a friends battery of the same everything, put it in mine and it powered on, did try his charger in my PC and it could charge...what could be the problem? For till now, i am still using the friends charger and battery while my charger and battery are working in his Pc!!! Help. Thanks.

More replies
Answer Match 33.18%

Hello, we have 20 of the new Probook 11 G2 min laptops (11.6"). An inserted HDMI cable is not always recognised by the system, or not at all. The sound output plays static (1 sec) before a sound with latest driver. This is Windows 10. We are hoping for a BIOS update to fix the HDMI problem? Thanks.

More replies
Answer Match 33.18%

Hello! I have a question.It is about upgrade my nootebook.I have 3rd Generation Intel Core i3-3120M can i upgrade  it to Intel Core i7-3632QM ?

A:probook 450 g0

Leroyinc. It is listed in your manual but not sure if it will work with your system board it has a 50% chance it will work??? https://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5359405&docLocale=en_US&docId=emr_na-c0... The Core i5-3230M has an 85% chance. http://www.cpu-upgrade.com/CPUs/Intel/Core_i3_Mobile/i3-3120M_(PGA).html REO

1 more replies
Answer Match 33.18%

I have the ProBook 650 it has 2 usb-3 ports.Is there a way that I can make these ports run like usb-2?The reason, I have a program that uses usb for uploading but doesn't work with the high speed of usb-3.

More replies
Answer Match 33.18%

I have product key of only 20 letters, why is this soAnd how can I get original product key

A:Probook 450 g2

@Humza100? You can try this very nice (free) tool to show the key and a great deal of additional information:Belarc Adviser The report outputs to your system and you can save it as an .html file. Open the saved file and search for "key" The line including the key should also include your system name / full Operating System. Example: Microsoft - Internet Explorer00123-40047-12345-AAOEM (Key: CNX7R-6KL3SA-D87CX-Y9J72-8CC7P)e    Microsoft - Windows 8.1 Professional (x64)00123-40047-12345-AAOEM (Key: CNX7R-6KL3SA-D87CX-Y9J72-8CC7P)e When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers. 

1 more replies
Answer Match 33.18%

Hi, I am trying to insert my micro sim card into the port on side and i managed to get it right, but it does not pick up or read the sim card. I have tried the sim card on different notebooks and it works,  and have tried on the same model on other users notebook and it does not read so am i missing something?  Please help!!!

A:HP Probook 650 g2

@Natz7? Is the Card Reader checked in the BIOS???  REO

1 more replies
Answer Match 33.18%

Dual graphics in laptop HP ProBook 455 G1Hello! I have a problem. I have laptop HP probook 455 G1 with dual graphics. integrated( AMD Radeon HD 7640G)+  discrete (AMD Radeon HD 8750M). I want to install the latest drivers. but what do I do if the discrete supports them, and integration - no.? And how to properly install the driver? Thanks

A:HP Probook 455 G1

Install the AMD driver that is available at the HP Support portal. (If there is not one available, leave the driver installation as it is, unless you mind that it stops working.) It contains the AMD and Intel driver. Do not install the Intel driver seperately. If you do install it seperately, the switchable  grapgics function will no longer operate as expected.

1 more replies
Answer Match 33.18%

Hi all,

Looking to install a second HDD for a laptop that doesn't really use their DVD bay.

Is this going to be a specific component for an HP laptop, or are they all pretty much standard now days?

Any recomendations on types / brands?
 

A:Second HDD bay for HP Probook 450 G1

11 more replies
Answer Match 33.18%

I have HP Probook 450 G3 (P5S63EA) and I see that it has an empty M.2 slot.I want to buy for my laptop M.2 SSD and chose several models.Here is Samsung EVO 850 M.2 (MZ-N5E250BW) 250 GB, interface Sata 3, format M.2, memory type TLC 3D V-NANDand  Samsung MZHPV256HDGL-00000 (SM951) 240GB, interface PCIe x4, format M.2, memory type MLC. I read all available technical documentation for my laptop and see that only Sata 3 interface SSDs from HP are for my laptop. What about PCIe x4 in M.2 format? WIll it works on this laptop?Of course PCIe SSDs has very very faster read/write speed! I would prefer to PCIe ssd from Samsung.I read on this forum that other people used Samsung 850 Pro with MLC 3D V-NAND for this laptop as well. But nothing about PCIe x4.Of course Samsung EVO 850 M.2 (about i wrote upper) should works great because in using sata 3 interface in m.2 format. But what about PCIe x4?  Thanks !

A:HP Probook 450 G3 m.2 ssd

and small adtition.I found in this thread http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-EliteBook-840-G3-with-SAMSUN... information about using samsung 950pro (which uses PCIe x4 interface) leads to a long boot time and information about non-compatible samsung's firmware with HP laptops.May be some HP professionals could give me advice in it?

1 more replies
Answer Match 33.18%

Good morning, I'm findig an 8 gb memory upgrade for Probook 450 G4 but i don't found the correct Hp part code, anyone can help me?thank al lot! 

A:Probook 450 G4

Pippopotamo Hello;Allow me to welcome you to the HP forums!Here is the link to the Service and Maintenance Guide for your PC: http://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=10477253&docLocale=en_US&docId=emr_na-c0... The memory module info in on page 38. The part number for the 8GB memory module is 826398-850.Good Luck

1 more replies
Answer Match 33.18%

I need driver for my notebook HP ProBook 450g for PCI Simple communication controller.2. Where I find Com1 setting in device manager?

A:HP ProBook

Hi: There are 4 generations of Probook 450's...G0, G1, G2, G3...so I can't give you the exact driver link. For the  PCI Simple communication controller, go to your notebook's support page, download and install the Intel Management Engine Interface driver. Unfortunately, I don't know the answer to your other question. 

1 more replies
Answer Match 33.18%

Hey Guys:I had a problem with my laptop HP Probook 450 G2 Iam using Windows 10 X64 and when i setup it's AMD Radeon R5 M255 it is setuped but without any change and only working is Intel Video Driver  I tried to unsetup the Intel Driver but the new Wroking Driver is the Basic Video Driver  please help me making the AMD Driver is the Main Driver Thank you for your care .

More replies
Answer Match 33.18%

Please help to reset the password on the BIOS. HP ProBook 470 G0

More replies
Answer Match 32.76%

Hiii.... its Subhranshu.. dr frnds i hav HP PROBOOK 5310m [energy star] my notebook dosent start at all..... its jst 2 months old(bought on may 3rd 2016) it was performimg excellent till the last time i used it(7th jul 2016). Also i had shut it down properly and yestrday when i turned it on it showed a message:''NON-SYSTEM DISK OR SYSTEM DISK NOT INSTALLEDREPLACE AND STRIKE ANY KEY WHEN READY''And didnt start at all. Plz help me run my notebook

A:hp probook 5310m

Sorry friendsThe actual message is: ''non-system disk or disk errorreplace and strike any key when ready''Please please please help

1 more replies
Answer Match 32.76%

Hello to everyone! I've got such a problem: my laptop is HP ProBook 430 g2, the battery is broken and I'd like to purchase a new one but I couldn't find it on HP Store. Perhaps I'm looking for it in the wrong place. Could you please help me find it?

More replies
Answer Match 32.76%

Attempted to up-date to Windows 10. Couldn't do it. Microsoft (MS) Tech tried to do it and couldn't do it. It seems there are some security tools that must be removed as they are incompatable with Windows 10. MS tried to remove and couldn't do it. He said they were on the mother board and when he tried to remove them they just kept coming back so once again he couldn't do it. He said contact HP and they could do it. Unable to find anybody at HP that can do it. As you can see nobody can do it so I guess it just cannot be done. That is unless some fine person out there has discovered a way to do it. If thats the case please tell me ho wo do it.

More replies
Answer Match 32.76%

Hello people, I have bought a HP ProBook 470 G3 and I am trying to insert a second hard disk into the notebook. The first drive is a SSD M2. I found out that there is no bracket inside the notebook, so I cannot secure the hard disk. I have found the HP 828147-001 HDD Hardware Kit, but then I get two different brackets. One with three screws and one with four screws. I need the one with four screws. I hope one of you can help me to find the right one what will fit in my notebook. BrokenWing PS: I am located in The Netherlands.











Solved!
View Solution.

A:HP ProBook 470 G3 HDD bracket

Dear Customer,  You have found the right part number for the HDD Bracket.  828147-001You may use this and it is compatible. For more information sending you the complete guide. Please check the below link. http://cdn.cnetcontent.com/f0/f9/f0f98127-beaa-45b0-bb5b-58a10d8ef9a5.pdf  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee  

3 more replies
Answer Match 32.76%

I bought a managed probook and i didnt notice it and it wont let me log on, and it says that there is already an administartor account and i try to go to bios settings and it says enter admin password i was wondering if you have a default password or something that might work.

More replies
Answer Match 32.76%

Hi, I'm a field service tech with a frustrating problem.  HP Probook 640 G1, initial customer complaint was that the system will charge battery when turned OFF and plugged in, but system will not charge battery or use wall power when turned ON. Battery and power cable were replaced; no change.  Conclusion at that point was a problem existed between the power cord and power connector on the system board; thus the system board was replaced.  Since then, the laptop will not power up at all, on battery or when plugged into the wall.  Today I replaced the power button board, and got the same symptoms, but noticed that when I press the power button, the battery indicator LED blinks nine times and stops; nothing else happens.  Any suggestions would be greatly appreciated.

A:Hp Probook 640 Won't Power Up

@pat21784A

?Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).

If you are unfamiliar with the Forum's private messaging please click here to learn more.

Thank you,
Omar

2 more replies
Answer Match 32.76%

Needing drivers for PCI Simple Communications Controller also have an Unknown Device in other devices in computer management.

A:HP Probook 650 G2 drivers

Hi: For the PCI Simple Communications Controller you need to install the Intel Management Engine Interface driver found under the chipset driver section. For the unknown device you probably have to install the 3D driveguard driver found under the storage driver section.

1 more replies
Answer Match 32.76%

My tnh c?a ti ?ang s? d?ng r?t bnh th??ng v ti c c?p nh?t BIOS m?i nh?t ver f.61a v n ? t?o ra l?i khng nh?n driver m thanh IDT v my ?nh, m ti t?i v? b?n c?p nh?t trn trang ch? c?a HP. th?t khng th? tin ???c ?i?u ny tr? l?i cc l?i ng? ng?n pht sinh t? h? th?ng ??ng b?. Ti ? th? ci ??t trnh ?i?u khi?n m?i v cc phin b?n c? nh?ng ??y tuy?t v?ng hoang d. trnh ?i?u khi?n m thanh c?a ti c ???c '?? nt cao thi?t b? audiov' v r?t t m thanh.la l?i pht sinh trong quan ?i?m c?a ti l do c?p nh?t BIOS. r?t mong ???c s? gip ?? v h? tr? t? cc nh s?n xu?t. Ti r?t c?m ?n b?n, xin l?i v ti?ng Anh c?a ti khng t?t

A:get help for the HP ProBook my 450g0

when I tried to install IDT audio drivers get the message ...

1 more replies
Answer Match 32.76%

Needing drivers for PCI Simple Communications Controller also have an Unknown Device in other devices in computer management.

A:HP Probook 650 G2 drivers

Hi: For the PCI Simple Communications Controller you need to install the Intel Management Engine Interface driver found under the chipset driver section. For the unknown device you probably have to install the 3D driveguard driver found under the storage driver section.

1 more replies
Answer Match 32.76%

Cant start proBook 430 G2.Power led blinkingANDCaps lock blinking instantlyANDPower button blinking instantlyI have tried to put out the battery then 30 sec push the power button. No effectVideo:https://youtu.be/NZFiR9B2L5s

More replies
Answer Match 32.76%

Hi,When upgrading to Win 10 from Win 8, I've got the message to firstly remove the HP Client Security.  When I tried to uninstall it, the message asked me to firstly remove the following programs:Device Access ManagerFile SanitizerTrust CirclesTheft RecoveryDrive Encryption However, I've got the following problems when trying to remove them.1. Drive Encryption - I've been asked to disable it first but don't know how to disable it.2. File Sanitizer, Trust Circles & Theft Recovery - Can't find those at the Program Uninstall at Control Panel. Can tell me how or show me the web page for the tutorial to do so?  Thanks.

More replies
Answer Match 32.76%

I was trying to restore the factory settings to get rid of some unwanted software I couldn't delete. The recovery process kept failing. Now when I try to start the laptop it says there is no operating system installed. I want to download a recovery cd on my other laptop, write it to a cd/DVD disc, and restore the laptop from this recovery disk, can I download the files needed to do this anywhere. I will buy one if necessary but would obviously prefer a free version. The laptop is around 12 months old, may be just over, may be just under.

A:Can I get a recovery cd for the probook 455 g2

Shaunh84 Hello;Allow me to welcome you to the HP forums!I read your post about needing recovery media and wanted to help. Sorry, there is nothing you can download and nothing available for free. Ordinarily, I would recommend using HP Recovery Media to restore your PC to its original condition. That would erase the entire drive, format the drive, and install the OS, the drivers, and the HP utilities. Unfortunately, there is no HP Recovery Media linked to the HP Product Page for your PC.  You can try contacting HP Customer Support directly, using the links below, to see if you can order if from them:If you live in the US or Canada, contact information is on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1If you live elsewhere, contact information is on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.htmlSince HP no longer provides Recovery Media for your model, a couple of other sites you should check are: http://www.computersurgeons.com/  and http://www.restoredisks.com/ Good LuckI am a volunteer and I do not work for, nor do I represent, HP.========================================================================If you feel my suggestions helped you, please click the Thumbs-Up symbol to say thanks!If they helped resolve your issue, please click "Accept As Solution" to help others find similar information.

3 more replies
Answer Match 32.76%

I ordered a probook 450 with a 256 gig M2 ssd.Im wanting to know if i can add an addition hdd since the factory hdd is in the the M2 form factor?

A:Can the Probook 450 take an additional hdd?

https://m.newegg.com/Product/index?itemnumber=N82E16834266511This is the poduct in question.

3 more replies
Answer Match 32.76%

Hello, Right now I use win7 64bit OS. And I have internet problems( speed problems, with my old laptop speed was much bigger)  I use wireless internet. I want to know do I use the right wireless driver, because there are many choises in HP wireless drivers list.Can you help me ?

More replies
Answer Match 32.76%

Hello, i have a HP ProBook 4520s and im using windows 7 professional i tried to insall windows 10 couple of times and when it downloads and starts install in middle of some reboots i get a black screen and its stuck i tried to update my graphic card it says its up to date any suggestions please? thank you.

More replies
Answer Match 32.76%

Hello

Please help me with a problem :
I have conected my laptop with tv and home cinema by hdmi but is working only 2.1
If i go on control panel -sound - ati hdmi output -configure the only option is stereo.
How i can configure to go 5.1 ?

thanks

A:5.1 on hp probook 4720s

On many systems, two channel stereo is all that is available. It can be hardware limitations and with a laptop there isn't much you can do.

I can't find anything on HP or other sites to confirm just stereo, but if that is all you are getting I suspect that is it. This is sold as a "business" laptop so it may not have all the Media features a "non business" or "consumer" model may have.

2 more replies
Answer Match 32.76%

Hi,gave my laptop hp6560b to my daugther. She entered a bioss password administrator but lost it. I would need to remove it now. I read that it can be done with smc.bin. Would it be possible to provide me with the appropriate file. If yes I will send you serial number and uuid of the laptop.Looking forward to your support.Best regardsPat51

More replies
Answer Match 32.76%

Is it possible to upgrade to a I"ntel 535 2,5" SSD 480GB"

A:HP ProBook 4530s hdd to ssd

Hi @hulp_gezocht! Yes, you should be able to put a SSD in your notebook, but since there is only one HDD bay and all you need to do replace it with the SSD. Here's the link to the service manual if you want to read ahead on how to remove and replace the HDD, more specifically - page 52:http://www.hp.com/ctg/Manual/c03054480.pdf Hope this helps and best of luck!




Official WD Representative.Please, Kudo me and choose as Answer if this post helped you!

1 more replies
Answer Match 32.76%

I accidentally spilt tea on my keyboard of hp ProBook 4440s.  I dried it the best as i could. Everything seems to work fine, only my trackpad is now not working. What should i do? Also is this ProBook 4440s keyboard spill proof? I am scared and afraid. How do I repair my trackpad? 

More replies
Answer Match 32.76%

I had upgraded to Windows 10, that was a mistake in itself because of the mess with the DVD drive and other drivers.  In any event I attempted a full recovery and apparently the inage on the disk was corrupt.  Now I am left with an inoperable system.  Is there somewhere I can download the factory image from the website?  I cannot find the image.  Please help.... 

A:Probook 450 G1 Recovery

mjs0623 Hello;Allow me to welcome you to the HP forums!While Microsoft tells you that there is no risk in the Win10 Upgrade, because they let you believe that you can always revert back to your original OS and setup within 30 days, the ugly fact of the matter is that the Win10 GoBack function has proven to be unreliable -- and when it fails, it can leave machines in a corrupted state -- which doesn't always happen, but it does happen often enough to be a problem and you won't get any warning in advance that it is going to trash your PC!If that is not bad enough, the Win10 Upgrade is know, in some cases, to corrupt the Recovery partition stored there by the OEM that built the original machine. This pretty much guarantees that no HP Recovery is going to work: http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HP-Recovery-Manager-Blocked-After-Windo... Ordinarily, I would recommend using HP Recovery Media to restore your PC to its original condition. That would erase the entire drive, format the drive, and install the OS, the drivers, and the HP utilities.Unfortunately, there is no HP Recovery Media linked to the HP Product Page for your PC. This could be an oversight by HP, or it could also mean that HP no longer stocks the recovery media for your PC. They no long stock recovery media for the older PCs.You can try contacting HP Customer Support directly, using the links below, to see if you can order if from them:If you live in the US or Canada, contact info... Read more

1 more replies
Answer Match 32.76%

When th epower button is pressed, the CPU fan starts and runs excessively. The CAPS lock button flashes, the power light for the power adapter flashes, and that's it. I cannot get into the BIOS by pressing F10, and nothing is displayed on screen. There are no peripheral devices plugged in. I have removed the battery and mains adapter and press and held the power button for more than 15 seconds as instructed in another article - same symptoms, ie, CAPS lock button flashes, the power light for the power adapter flashes, and that's it. I have removed and reseated the memory module and and tried starting the machine - same symptoms, ie, CAPS lock button flashes, the power light for the power adapter flashes, and that's it. I have removed the hard drive and and tried starting the machine - same symptoms, ie, CAPS lock button flashes, the power light for the power adapter flashes, and that's it. I've reassembled the machine nd and tried starting the again - same symptoms, ie, CAPS lock button flashes, the power light for the power adapter flashes, and that's it. I've even tried NOT using the power adapter, just turning the machine on with the battery in place - ame symptoms, ie, CAPS lock button flashes, the power light for the power adapter flashes, and that's it. Does anyone have any idea how I can at least get into the BIOS or run any of the diagnostics tests? If I could get that far, it wo... Read more

More replies
Answer Match 32.76%

?????? ????. ?? ???? ??? ????????? ???????? ? ????????, ????? ???????? ???????? ????????, ???????? ???.????? ??????? ? ???, HP proboor 6475b ? Windows 7*64, ? ???? ????????, ???????? ??? 1 ????? ????????, ???????????? ?????????:- ?? ???????? ????? USB 3.0; ??? ?????????? BIOS ???????? ?? ???????, ? ????? ???? ?????? ????????? ????????? HP ??? ?????????? ??????, ???????? ?????? ? ??????? ????????? ??????. ????????? ?????????? ???????, ????? ??? ??????? ??????????, ?? ????????? ????? ?? ????? ????? ? ?????????? ??? ????? ???? ? ???? ????????...??? ???????? ???????????, ??? ?? ?????. ????? ???-?? ??????? Good afternoon. Don't know how to write about the problem in order to observe the accuracy of the translation, try this.I bought a laptop with it, proboor HP 6475b Windows 7*64, during the inspection, the seller gave 1 month warranty, revealed the following:- do not work USB 3.0 ports; updating the BIOS the problem did not disappear, and moreover lost HP proprietary interface to control sound, screen brightness using the sys... Read more

A:Probook 6475b

@Wolde? Try these 2.  "Reboot after installing." http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5217803&swItemId=ob_125616_1&swEnvOid=405... http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5217803&swItemId=ob_129672_1&swEnvOid=405... REO

1 more replies
Answer Match 32.76%

I bought this probook used, it turns on & runs okay on the AC charger/adapter, but will not turn on or run on just the battery alone. . The battery says it is charging ok and  is now 100% charged , it still will not turn on without the adapter. Is this a laptop problem or could it be a bad battery?

More replies
Answer Match 32.76%

guys, where can i find the sound driver? Its not on the support website and the default windows one sounds muted(and it isn't). Thanks for the help.

More replies
Answer Match 32.76%

Hey All, I'm looking to buy a new HP Probook 450 G3 model number T3L12UT, and from what I understand in addition to having a HDD included, there should be an empty m.2 slot for a solid state drive.  My plan is to keep the HDD and add an SSD, but I want to make sure that this specific model of the Probook has that empty m.2 slot.  I guess the easiest question would be, do all models of the Probook 450 G3 come with that extra m.2 slot? Thanks for your time Phil

A:probook 450 g3 empty ssd

Here is the link to the Service Manual.There are four models available in the USA.One service manual covers all four models. Page 47 shows removal/replacement procedure for M.2 SSD. Page 2 shows compatible drives: M.2 2280 SSD (NGFF), SATA-3 Supports the following drives: ? 256 GB TLC ? 128 GB TLC Set as primary storage if selected.  If you found my answer helpful please say thanks by clicking on the Thumb's Up icon.If my answer solved your problem please mark it as the Accepted Solution. Thanks!   

1 more replies
Answer Match 32.76%

My employer and I are seeking a computer skin for the HP Probook 450 G3 that has large print labeling for the keyboard.  We know that most skins of this nature are designed for independent keyboards; but this is a case where the staff person  has a laptop and is also sight impaired.  We're not seeking large print stickers as others may use this laptop during and after the internship period. We're wondering if anyone might be able to help us.Peter KelleySt. Paul, MN USA

More replies
Answer Match 32.76%

I am interested in buying one of these devices however I have some questions: Is there a WWAN module on the Australian version and if not, is there a SIM slot that can be used with 3rd party add-in card? Does the motherboard chipset support USB 3.1, contrary to the specifications listed on the website, i.e. is it the Union Point 200 chipset? Also, there is no information regarding Discrete Graphics, so is the NV-930MX(2GB) actually included? The internal drives are listed as 500GB however the online store says it is 1TB. I'd appreciate some clarification on this as I'd like to know what I am purchasing. Thank you References: http://www8.hp.com/au/en/products/laptops/product-detail.html?oid=10477368#!tab=specs http://h20386.www2.hp.com/AustraliaStore/Merch/Product.aspx?id=Z3Y53PA&opt=&sel=NTB

More replies
Answer Match 32.76%

Hello I need a multimedia audio controller driver windows 7 64 bit hp for probook 450 G3, 

A:Driver probook 450 G3

@Rani-2016? http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7834518&swItemId=ob_158042_1&swEnvOid=405... REO

6 more replies
Answer Match 32.76%

Good day All, Kindly help with the following drivers for Hp probook 450 G2, windows 8.1 pro 64 bit.  Display AdapterPCI\VEN_8086&DEV_0A16&SUBSYS_2248103C&REV_0BPCI\VEN_8086&DEV_0A16&SUBSYS_2248103CPCI\VEN_8086&DEV_0A16&CC_030000PCI\VEN_8086&DEV_0A16&CC_0300Network Controller PCI\VEN_8086&DEV_08B3&SUBSYS_00708086&REV_83PCI\VEN_8086&DEV_08B3&SUBSYS_00708086PCI\VEN_8086&DEV_08B3&CC_028000PCI\VEN_8086&DEV_08B3&CC_0280PCI communication controllerPCI\VEN_8086&DEV_9C3A&SUBSYS_2248103C&REV_04PCI\VEN_8086&DEV_9C3A&SUBSYS_2248103CPCI\VEN_8086&DEV_9C3A&CC_078000PCI\VEN_8086&DEV_9C3A&CC_0780 Regards. 

A:Drivers for Hp probook 450 G2

Hi: You need these drivers... This package provides the Intel video drivers, control panel and display audio driver for supported notebook models running a supported operating system. ftp://ftp.hp.com/pub/softpaq/sp73501-74000/sp73595.exe This package provides the drivers to support the Intel 7260/3160 Wireless LAN adapter in supported notebook models that are running a supported operating system.  ftp://ftp.hp.com/pub/softpaq/sp70001-70500/sp70472.exe This package provides the Intel Management Engine Components Driver for supported notebook models running a supported operating system.  ftp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69938.exe

1 more replies
Answer Match 32.76%

So yesterday I opened my Probook 4540s, and it was at 0% charge (The OS literaly displayed that), which was weird. I tried playing with it a little, I've connected it to a charger, and it did not detect it - and eventually the probook shut down.At this moment the laptop won't turn on, and my guess is it's either the power brick, or the motherboard. I tried replacing the power cable connected to the brick but it didn't quite help.When the power cord is connected to the laptop, the LED blinks each second, but its a weird blink, like not on\off, it's turning on, blinking, turning on, blinking etc, but the laptop isn't charged, it wont start with either the battery connected or without it. Tried hard resetting, didnt work either.Does that sound like more of a motherboard issue? If so, what could I do to fix it? Should it be expensive?

A:HP Probook won't start

When I say it did not detect the charger I mean it was simply not charging

1 more replies
Answer Match 32.76%

Hello, the problem with the touchpad does not work, internal and external damage not driver download Synaptics Mouse Driver refused to be installed. 2) system temperature 90d how to fix, laptop cleaning performed 1 week ago











Solved!
View Solution.

A:HP ProBook 470 G1 Notebook PC

Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
 

German: HP Kundenforum
Spanish: Foro de usuarios de HP
French: Forum des utilisateurs
Portuguese: Frum dos usurios HP
Chinese: ??????????
Korean: HP ??????
Thank you for your understanding

3 more replies
Answer Match 32.76%

Hello, the problem with the touchpad does not work, internal and external damage not driver download Synaptics Mouse Driver refused to be installed. 2) system temperature 90d how to fix, laptop cleaning performed 1 week ago

More replies
Answer Match 32.76%

Hi, Got a Probook 470 G1 that doesn't want to power up. The small LED beside the power input socket is flashing constantly on and off (white). I've tried removing the battery and holding down the power key as recommended but to no avail. Also tried powering it up without the battery, but still only get the flashing white led. According to one forum, the flashing white led is a sign of a battery straight out of the factory that needs charged. The laptop was working fine until a couple of days ago.  I inadvertently left it on all day with a powerbank connected to the usb.  I'd thought it was my mobile phone that I'd plugged in. Is it possible that connecting the powerbank had damaged the battery? Any advice would be gratefully received.

More replies
Answer Match 32.76%

Hello, How can I configure Elitebook 820/840 and Probook 640/650 BIOS that it allows me to do UEFI network boot? I need to deploy Windows 7 x64 together with TPM 2.0. I can do that successfully with USB boot media but not from the PXE. Best,Kaido 

More replies
Answer Match 32.76%

Hi,I've twice had to exchange a Probook 450 G3, for additional reasons also (faulty power connector), so have had experience with 3 units altogether. All 3 had the same issue, the fan would kick in too often, a few instances a minute, making an up and down whirring sound which was very annoying and distracting. The strange thing is that the fan would kick in when the CPU usage was minimal, <5%, web browsing is the most taxing thing I do, no gaming or intense graphic applications.Never had an issue like this with any other laptop/computer, it's basically brand new so no possibility of dust, too hot environment etc. My 8 year old Dell laptop with much more inferior specs handles these activities easily with infrequent fan noise/activity.The laptop is not getting noticeably hot for the fan to turn on and off so often. Is the G3 so heat inefficient that the CPU gets too hot very easily, or is the fan's thermal sensor temp. range too low and the fan is kicking in unnecessarily? I've updated the BIOS and chipset and already contacted HP support who want me to send it to them, but I explained that this issue happened on all 3 units, revealing that the model design/components could be at fault.Would appreciate any insight/explanation for this.

A:Probook 450 G3 Overactive Fan

I've seen other people complaining about the same issue, so I'm not alone: ProBook 450 G3 - Fan going on & off for no reason Fan making a wavy sound / HP ProBook 430 G3 Laptop's cooling fun speeds up speeds down constantly fan noise HP probook 430 G2 - fan noise probook 450 g2 cooling fan

1 more replies
Answer Match 32.76%

I am about to order a probook 470 G4 with 256GB SSD. I want to add the harddisk from my old laptop that recently died to add some diskspace in case I need it (I have the disk anyhow). Looking at the service manuals for the G3 and G4 versions of the Probook 470 I see 2 different numbers for the brackets:In the G3 manual I see 828147-001, in the G4 manual it says 906002-001. The part numbers for the hardisks are however the same for both revisions of the 470. That suggests that this is the same or similar part. I cannot find the number mentioned for the G4 online (except in Eastern Europe). the G3 version is however available here in the Netherlands. can somebody explain the difference? Will the 828147-001 fit in the G4?

More replies
Answer Match 32.76%

I have a HP Probook with a docking station, however I am experiencing a lag between the laptop and what appears on the monitor. The lag is not there when I work on the laptop directly. Any suggestions to rectify this?

More replies
Answer Match 32.76%

I would like to upgrade the Probook 440 G3 with a secondary storage a  2,5 500 GB SSD.In this notebook primary storage is a 256 GB SSD M.2.Is it possible the installation of both without removing the first  256 GB SSD M.2  (SSD M.2 Primary storage + SSD 2,5 Secondary storage)? If yes is it necessary to buy the Hard drive Hardware Kit (includes bracket and screws)? Thank you

A:Probook 440 G3 SSD Upgrade

See p. 35 of the Manual here: Service Manual There is a SATA hard drive bay and it looks like the SATA connectors on the drive plug directly into the motherboard. The M.2 slot is at right angles and above the hard drive bay so yes, you can have both a 2.5 inch SATA SSD and also the M.2 mSSD. You can just add in the 2.5 inch SATA SSD (or hard drive) and you really do need the hard drive mounting kit otherwise the hard drive will rattle around in the bay and that is not good for the laptop or the drive.  Hard Drive Hardware Kit, includes: 826382-001 http://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=T8Y22US When you install the SSD or HDD storage drive you will have to initialize and mount it (assign a drive letter) in disk management. Let us know if you need any help.  If this is "the Answer" please click "Accept as Solution" to help others find it.   

1 more replies
Answer Match 32.76%

Hey all, Nice forum and really have found a lot of useful info here but still need help. My 650 G1 started showing Plugged in / Not Charging.  I found the following link on HP but when I try to run the SP / BIOS update, it tells me that this update (SP67772) is stepping back from what I currently have on this laptop.  Do I do this anyway or is there some other update that needs to be done and I keep my current version? http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c05058319 It was purchased earlier this year and is still under warranty but when I try to do an on-line chat, it tells me that the serial # is not valid but I know it is. Anyway, any help that you all could send my way would be appreciated. Thanks.Frank

More replies
Answer Match 32.76%

I have purchased HP probook 440G1 in the year 2013 with 04 (four) year warranty but HP Support Assistant shows that warranty expired on 13.01.2015. How it can be? Sl. No. is [Personal Information Removed], PRODUCT NO. - F6B15PA#ACJ PLEASE EXTEND THE VALIDITY OF WARRANTY FOR FOUR YEARS FROM THE DATE OF PURCHASE. REGARDS. PREM CHAND

A:HP probook 440G1

@yes1

 

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).

 

Thank you for visiting the HP Support Forum.

 

1 more replies
Answer Match 32.76%

Have performed hard reset, other known good power adapters, removed battery, memory and hard drive, installed new power cable all to no avail. These units will not start.

More replies
Answer Match 32.76%

Which model of M.2 ssd i can use to upgrade ProBook 450 G3 notebook?

A:Model of M.2 for ProBook 450 G3

@Den_m2014? Solid-state drive, M.2 256-GB, TLC827583-001 128-GB, TLC827053-001  Your manual here. http://h10032.www1.hp.com/ctg/Manual/c04825517 HP ProBook 450 G3 Notebook PC - Remove/Replace videos http://h20464.www2.hp.com/results.htm?SID=7834555&MEID=9A46722E-8743-4B24-A407-EC5BCB0254FA REO

7 more replies
Answer Match 32.76%

I have a strange problem.When i start the Laptop and go into the Bios all the keys are working just fine.When Windows is started the Z,X,C and ENTER keys are not working anymore. The following has been done already: 1. Cleaning laptop (incl. the inside, fans etc.....)2. Keyboard has been replaced.3. Heatsink has been replaced.4. Motherboard has been replaced.5. Reinstall the drivers6. completely re-install the business image. But with no result. Do you have any other suggestions? Kind Regards, Arthur de BoomField Service EngineerHPCDS the Netherlands

More replies
Answer Match 32.76%

My current processor is an AMD Athlon IIP320 dual core processor.  There is up to a 5 second delay when I click on applications, websites and the media player.  Would it be possible to upgrade my current processor to an Intel Core processor ?

More replies
Answer Match 32.76%

Ok, so we have decided to try a newer modle of the hp ProBooks not knowing that they cannot connect to the preivious docking stations we had purchased. After research we have found they work with the port replicator(usb3.0 HP)all seemed well until i get a service ticket inquiring about the freezing issues, After checking the drivers and more recent version of the bios still no dice. I had opened the laptop(we keep them closed initally-obviously lol for the docks) and the laptop it self was unresponcive, ctrl alt del did nothing nor did the curser move.- I am running the ProBook 450 G3 no hardware changes- most recent updates and drivers- Windows 10- HP Port Replicator is new and functioning- 1 pissed off employee  

A:ProBook 450 G3 freezing

It is hard to tell from your comments where your issue is at this time. In terms of the usb 3.0 dock, i believe it requires displaylink drivers, which should be available as a softpaq from HP. Did you install them on your laptop?

1 more replies
Answer Match 32.76%

About two weeks ago I bought an HP Probook 4710s. Everything was fine until about 2-3 days ago. I was playing a game on my computer when it randomly turned off. I tried powering it back on and it shut off within two seconds. It felt a little hot so I went to bed and it worked fine the next day. The next day I didn't play any games and I was just using it normally, (browser, yahoo and aol messanger) and it shut off again. It didn't feel as hot this time. Finally, this morning I was watching TV and put down laptop to get a drink and when I got back a minute later my computer had shut off. This time it was not very hot at all. I've been googling things but haven't really been able to find any answers. I don't know if it is a hardware issue, or lack of updates of some sort, or If i got a bug that makes my computer think it's overheating and shut down. It's pretty annoying since I JUST got this computer. Any information in the right direction is appreciated.
Thanks in advance.

A:New HP Probook Shutting Off.

By the way I am running Windows 7.0 Professional. I'm not sure why the thing to the left says OS:Vista

1 more replies
Answer Match 32.76%

i upgraded my system from windows 7 to windows 10 and am having issues with my audio, i troubleshooted and it responded that am missing base system driver and PCI communications driver please what do i do

A:hp probook 6550b

Hi: Your notebook is not supported by HP for W8, W8.1 or W10. The missing devices have no bearing on why the audio is not working. You use the windows 7 drivers for the base system and pci simple comms controller devices. The base system device needs this driver. This package contains the Ricoh Media Card Reader Driver for the supported notebook models and operating systems. The Ricoh Media Card Reader driver enables the integrated media card slot. ftp://ftp.hp.com/pub/softpaq/sp46501-47000/sp46999.exe The PCI Simple Comms Controller needs this driver... This package provides the Intel Management Engine Components Driver and Interface. ftp://ftp.hp.com/pub/softpaq/sp59501-60000/sp59684.exe What is the problem with the audio?  No sound at all? First see if the W7 driver works for the audio too...install and restart the PC. This package contains the IDT High-Definition (HD) Audio Driver for the supported notebook/laptop models and operating systems.  ftp://ftp.hp.com/pub/softpaq/sp48001-48500/sp48147.exe If that doesn't fix the sound, I have one other thing you can try.

1 more replies
Answer Match 32.76%

Hi Everyone, Just bought HP ProBook 430 G2 (HDD version - 500GB 7200rpm). There is a M.2 socket (M key) under the cover. - I would like to know this socket support M.2 SSD (B+M key) or not ? - Otherwise, only "mSATA" in bios for selection. Is this selection for boot from M.2 ?Thanks 

A:M.2 (NGFF) SSD on Probook 430 G2

anybody help to answer Thanks !!

8 more replies