Tech Problem Aggregator

Installing CD-RW in Compaq Presario

Q: Installing CD-RW in Compaq Presario

Hi Guys,

I am trying to install a Cyberdrive x16x12x40 CD-RW into a Compaq Presario 5000 series PC. If no other device is attached to either the IDE or to the power supply, and if the CD-RW isn't attached to the IDE then power will get to the CD-RW. If the CD-RW is attached to the IDE and/or any other device is attached then no power goes to the CD-RW.

Can anyone shed any light on why this is and how I can fix it.

Cheers
Garth

A: Installing CD-RW in Compaq Presario

14 more replies
Answer Match 75.6%

Hello,

We have a Compaq presario 5000 we are working on and we have it running with 256mb RAM, the computer will work when we have 2 128mb sticks in it. When we put a 3rd stick it seems to not start, and also when we tried to put 2 256mb sticks in, it would not start. All the ram is SD, any information would be appreciated. As for RTFM, we are working on junked computers, trying to make whatever working that we can. Any links or general help would be appreciated.

Thank you.
 

A:Installing new ram, Compaq Presario, will not start.

There might be an issue with how much memory the machine can take. You might want to check this site out. It might help http://www.pny.com/configurator/
 

4 more replies
Answer Match 75.6%

Does anyone know for certain if you can install windows XP Professional on a Compaq Presario 5441? I was attempting to do a clean install but the setup process continues to fail. At some instances the comp freezes up when copying files over and during others we get a blue screen with various STOP errors including 0x0000000A, 0x00000050, etc.

A:Installing Windows XP on Compaq Presario

I think, just from doing some basic research, that the Presario might not have the minimum specifications required to install Windows XP, Professional or otherwise. Check out this link and compare.

http://www.microsoft.com/windowsxp/p...g/sysreqs.mspx

I would suggest simply buying a new computer though, seems the presario is a little dated. Do they even offer support for it anymore? I thought since Compaq was bought out they don't support their legacy systems anymore...

3 more replies
Answer Match 74.76%

I recently bought a Compaq Presario 2100 laptop and I bought a 512 MB of RAM. The RAM I bought was PNY DDR333 Optima Memory and I checked with the manufacturer and it is completely compatible with my laptop. I tried to install the memory and when I went to boot up my computer a screen popped up saying that Windows failed to load. Is there a certain spot I need to put the new memory in because there are two slots. The original RAM is 256 MB. If anyone can help that would be awesome!!!
 

A:Problems Installing RAM in Compaq Presario Laptop

Are the slots any different from eachother?

Regards,

Korrupt
 

1 more replies
Answer Match 74.76%

Hello and thank you for reading my post. I am (I'd say) about intermediate in terms of home PC hardware installs, but I haven't installed a drive in probably 5 years. This is relevant to my current problem, as many things have changed since then. I guess that knocks me back down to about a "novice +".

I have a new Compaq Presario SR5113WM (due to affordability). The factory hard drive is a Seagate Barracuda 7200.10, ST3061815AS. The motherboard has a vacant IDE port that is blue, and not labeled on the motherboard. The other vacant port is black, and labeled "floppy"--which is self explanatory.

I am wanting to install the Western Digital EIDE hard drive from my previous (older) computer that was still running XP, so that I can retrieve the data on it, and to act as a secondary hard drive*. The Compaq Presario uses Vista.

*The older computer will not recognize the OS (XP) now, after a cross-country move in a rental truck. Therefore, I can't reinstall the Western Digital drive back into the older computer to retrieve or transfer data.

With the power off, I attached the 40 pin IDE ribbon cable to the (first mentioned) vacant port in the Compaq, and the power plug (marked "P3") and the smaller (about .5") 4 pin plug (marked "P8") to the back of the WD hard drive. There is no jumper shunt on the back of the Western Digital Drive, and I can only find one now. I had hoped that the newer Compaq/Vis... Read more

A:Compaq Presario SR5113WM and installing an additional HD

I had a similar problem. Also bought an Presario SR5113WM from Walmart when the motherboard in my old machine bit the dust shortly after New Year. I pulled two IDE drives full of files and data from that machine and put them in the Presario. Like your experience, the Presario wouldn't boot after the IDE drives were in it.

Long story short...it turns out that, although the SATA drive was still in the machine and was still recognized as the C: drive, Vista decided that it should boot from an IDE drive (which of course, had no operating system.)

If you're still having problems booting, try holding in the Escape key while booting to bring up the boot menu. Once in the boot menu, make sure the drive that came with the machine is highlighted (I think it's a Hitachi drive if I remember correctly) and try booting from it.
 

1 more replies
Answer Match 73.92%

Hi!!I just installed Windows7 on my Compaq Presaio V6409TU notebook and found that the sound output is not there through inbuilt speakers.I checked device manager and updated Conexant HD Audio driver online, but still no sound.I tried contacting HP support, however, it says my product is out of warranty, so no help either. Quite frustating. Below is the details of my notebook : Model : Presaio V6409TU.OS : Windows 7 Ultimate 32-bit Service Pack 1Processor : Intel(R) Core(TM)2 CPU         T5300  @ 1.73GHzSystem board : 30BB 66.42BIOS : Phoenix F.2C      Video : Mobile Intel(R) 945 Express Chipset Family 1280 x 800 Audio : Conexant High Definition AudioCurrent driver : CHDRT32.sysversion : 4.33.1.60  This is quite frustating as I'm using this notebook for 9 years and there never had been such issue earlier.Solution for the same is highly appreciated.Thanks in advance. Regards,Sonu   

More replies
Answer Match 73.92%

I have a Compaq Presario SR1303WM Computer that has both IDE and on motherboard has 2 SATA  connecters both Data, I have a Western Digital WD800JD WD Caviar SE HDD that I am trying to hook-up,the last HDD was an Western Digital IDE HDD,I bought this SATA HDD and have the Data Cables along with SATA 1/11 Data&Power Cable,I even bought a Bidirectional SATA to IDE 3.5 inch Adapter,I can get the Bios to recognize the hard-drive but I cant load the Operating System, does anyone know how I can rectify this problem I sure would be thankful for any help I could get.

A:Compaq Presario SR1303WM I need advice on installing a SATA ...

Hi: How come you can't run the SATA drive straight from the SATA 0 Port on the motherboard, without having to use a SATA to IDE adapter? You have to make sure if you want to boot from the SATA drive, that it is connected to the SATA 0 port.(although it looks like they are labeled SATA 1 and 2 on your PC's board). The SATA 2 port can be used for a secondary SATA HDD or a SATA optical drive. These ports should be labeled accordingly in that small (normally white) print on the motherboard. No special drivers should be needed. Please go into your BIOS, and let me know what storage option settings you have--especially if there are setting options for the storage controller. Paul

7 more replies
Answer Match 73.92%

Hi all. I'm new here but not what you would call new to computers. I have a Compaq Presarion laptop sitting behind me that is giving me fits! A friend of mine got it as a gift. Its got a 1.5 ghz celeron processor, 256 mb of ram, and a 40 gig hard drive.

Here's the problem. When he got it, windows was corrupted and wouldn't boot to windows without a ton of error messages. He told me to wipe the drive clean and re-install XP. He handed me a fresh, recently purchased version of Win XP home and told me to do away with HP's proprietary version of XP. I figured, easy enough. I've done this kind of thing many times with many older computers.

Well, here's the problem. It won't let me do a full format from the XP CD during the first few pages of setup. I can do a quick format of the drive and continue on. However, during setup, I get errors. I've formatted and reinstalled the OS several different times, not always getting the same error message. I completed the install once (with errors) and when I got to the desktop, there was no start button or system clock .... or even the usual recycle bin icon. Nothing was there .... I could ctrl+alt+delete to reboot, but that was the only way to shut the system down.

What is different about these compaq presario notebooks. How can you do a low level format .... or a full format for that matter. How can you get it to take a regular microsoft version of windows XP? I've already wasted countless hours fighting with this laptop.

A:Problems installing Win XP on Compaq Presario 2500 Laptop

Bump ... there appears to be no pattern to the errors I'm experiencing. Can anyone help?

7 more replies
Answer Match 73.08%

Is it possible to install the battery into a Compaq Presario 1210 yourself? I am very mechanically inclined but have never opened a laptop...
thanks, Dan
 

A:Installing internal battery into a Compaq Presario 1210 Laptop..is this possible?

Since all laptops already come with a battery in them, I don't understand your question.
 

1 more replies
Answer Match 73.08%

hi i have a compaq presario 5300nx. I just want to play some video games on it but i dont have the proper video card/driver. I have pretty much the exact same problem as a guy whos title was " can i update a default vga.dll driver". Only reason im posting this is because i tried using the same steps as the solved question but couldnt finish with my model of computer, any help would be appreciated thanks
 

A:Solved: Need help with installing proper driver on compaq presario s5300nx

6 more replies
Answer Match 65.1%

Hi, My Computer a Compaq Presario SR1810NX with Windows XP Home Edition SP2 is having an issue with it wont get past the Compaq Logo Screen, like, I press the power button the PC powers on, Fan Speeds up and then slows down as normal, keyboard lights flash as normal and the Compaq Logo along with the v3.48 and ESC = Boot Menu options appear on screen, the things is that it wont get past this screen, it just sits there at the Compaq screen, the keyboard and mouse dont seem to be interacting with the PC since I press ESC or F10 for boot mode or system recovery but the PC wont answer at all, I've already Disconnected power source unplugged mouse, keyboard all but PC is doing the same thing just sitting at the Compaq Logo Screen, the computer doesnt make any sound at all no beeps or anything, it wont let me access Windows at any time, recent installations well could be that I just installed a Mobile Bandwidth Card just a couple of weeks ago, and also just a few days ago I connected my iPod Shuffle 2nd Gen to the computer and the computer wont recognize it at all, not even charging, I know this might be a virus or malicious software, but my computer has barely connected to the internet in the last weeks (I couldn't pay the Internet and I had to use my friend's Mobile Bandwidth Card I mentioned before) all I did while in Internet with the Mobile Bandwidth was some schoolwork and youtube videos, I need help urgently with this since I have to deliver a very important proyect for scho... Read more

A:Compaq Presario SR1810NX Not Getting Past Compaq Logo Screen

Try a power drain.
1. Unplug power cord
2. Hold power button in for 60 seconds or more then let go
3. Plug in power cord
4. turn on the power and try to boot to setup (BIOS)

If it enters the BIOS then you should be able to just press F5 to reset to defaults and then F10 to save and exit. The PC should work now.

However, if after the power drain you still can not get in the BIOS than there is a MAJOR problem which would require some type of repair.

1 more replies
Answer Match 65.1%

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

1 more replies
Answer Match 64.26%

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

14 more replies
Answer Match 57.12%

Hi. Does anyone know if a Compaq Presario SR1150NX does the display system support component video (Y, Pr, Pb) signal output function? Thanks
 

More replies
Answer Match 57.12%

my compaq presario cq57 says system disabled 62359871..plz help. thank you











Solved!
View Solution.

A:compaq presario

@sharp66? Enter   73031277

3 more replies
Answer Match 57.12%

How do you access the Bios on a Compac Presario 4110. I keep getting the message 162 Sytems Options not set. 163 Time and Date not set. Having visited Compac they were not a lot of help. Downloading the software recommeded by them was a waste of time, still got the above message. Tried all the usual keystrokes etc no good. Any suggestions would be appreciated.
 

A:Compaq Presario

9 more replies
Answer Match 57.12%

I have a compaq presario. I have 2Gig memory. I changed services from ATT to comcast internet. now my pc needs to be wiped clean and set up again but when I got the computer I did not get the discs. how can I do this without discs> it wont open up the internet even though I am connected.

Please help
 

A:compaq presario pc

8 more replies
Answer Match 57.12%

ok when i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do. Thanks
 

A:Compaq presario help

16 more replies
Answer Match 57.12%

ok I hace a compaq that is all messed up. lets see one day the monitor would not work after a storm. Bought another, For a while the screen would be blue but change back to normal. The pc also would have a hard time starting up after it was in idle. We would do a hard start and for a while that worked. Now when I try to start it it turns on but the monitor says no vga/dvi input. There is also none of the preverable beeps that are supposed to be there so in short (well long)the motherboard is fried? So do I use it as a planter in the yard or is there a way to get it up and running. It runs on XP media center it has a micro ATX form factor motherboard it is also an AMD 64 Anthlon. ram is 256 mb 1Rx16 pc 4200 ddr2 533 mhz. With all that said can I just replace the motherboard and reinstall the reinstallation disks and be up and running? ( if it could only be so easy) What about the cpu. i know many questions here thanks for patients. Please help me. Tina
 

A:compaq presario

does your system have agp or pciex (or even pci) slot free? Is the graphics on board? It sounds like a graphics card problem, even if it is onboard. I'd try a replacement card (even if it's just a pci card) and see what happens...
 

1 more replies
Answer Match 57.12%

sir, can u help me, i can't fint my driver for compaq presario v3760TU
previously, i used vista home basic but i convert to window seven.. but i can't find my driver in hp/compaq driver web.. plzz help me..
-sory for my english so bad..

A:compaq presario

Were you at this Hp/Compaq download page ?


Software & Driver Downloads Compaq Presario V3760TU Notebook PC - HP Customer Care (United States - English)&

6 more replies
Answer Match 57.12%

I have purchased a Compaq Presario 600 with an Athlon XP 2200+ processor. I do not have a copy of Windows XP to wipe it with. Is there any way with the installed XP that I can refresh this system and remove data frome previous owners? Or Can I load Win 98?
 

A:Compaq Presario 600 ??

Compaqs usually have a hidden partition with all the factory loaded software on it in an image format. As long as it does and you can figure out how to access it you could probable do that - but you almost likely need the XP Product key and may need to reactivate XP after the recovery. XP can only be install on one machine at a time - so if they are still using it you are out of luck.

Watch the boot up for any recovery messages or take a trip to www.Compaq.com and look up the info for your make/model.
 

1 more replies
Answer Match 57.12%

How do you open the casing on compaq presario 5304. I don't want to breakit.\

Thanks.
 

A:compaq presario

Link to tell you all about your computer. http://h10025.www1.hp.com/ewfrf/wc/...ry&tool=prodinfoCategory&dlc=en&product=93186
 

1 more replies
Answer Match 57.12%

I friend of mine purchased this Presario in 2004. She hasn't had internet since about 2006, so she hasn't had any of the updates since then. I brought her tower home with me since I have internet to load her updates. We're trying to get it internet ready. When I brought it home last week nothing would open. So yesterday she gave me the system recovery disc. I started with the Standard Recovery, but there were too many files that it couldn't recover. So I then decided to do a full recovery. After the full recovery it was rebooting and it told me that not all the system could reload and I couldn't hit okaybecause it wouldn't read / acknowledge my mouse. So, I unhooked her computer and rehooked mine to see what her alternatives were. I found a website, they wanted to know all the things it wouldn't oload. All I can remember is that it was things that could me downloaded later like: Norton, AOL, Adobe, MSN, and QuickTime.

So, I unhoked mine and rehooked her's up (and booted up my laptop). When her's came back up it's saying: NTLDR is missing Pres Control + Alt +Delete to Restart

My question for you is there anyway I can save her conputer? She doesn't have a lot of funds, being a singe mother of a 7 yr old and I'm just a good friend trying to help her out.

Thank you in advance for any help you can provide

A:Compaq Presario

I decided to see what happened when I ctrl alt delete and then decided to do another recovery. Here's some more info (could not recover errors):
1. C:\WINDOWS\Help\SB\Training\WXPPer\Content\Wave\[email protected]
2. C:\WINDOWS\System32\ntdll.dll
3. C:\WINDOWS\System32\ntkrnlpa.exe
4. C:\WINDOWS\32\dllcache\dinput8.dll
5. C:\Windows\systme32\dllcache\licdll.dll
6. C:\WINDOWS\system32\dllcache\locator.exe
7. C:\WINDOWS\system32\viaservc.dll
9. (Black screen instead of error message)
9. C:\WINDOWS\Installe152ec/msi
10. C:\WINDOWS\Installer\1b2cc.msi

then all of after about 20% a big blue screen with following:
A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. IF this screen appears again, follow these steps:

Check to make sure new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup... Read more

3 more replies
Answer Match 56.7%

This is an older system. What manipulation of the case needs to be done to add / remove the hard drives?
 

A:Compaq Presario HD Installation

8 more replies
Answer Match 56.7%

How do you get to the HHD drive in the compaq presario 1456VQLIN?
 

A:Compaq presario 1456vqlin

I'm not finding that model so that must not be the model number. Typically, you turn over the laptop and the hard drive should be under a large panel...
 

1 more replies
Answer Match 56.7%

the DVD drive stopped working and now the hard drive has errors.

I got an external USB DVD drive on it, but chkdsk cannot seem to repair the hard drive.

Anyone got any idea how to fix it or recover data off of the hard drive. I got a year's worth of work on it, and none of my files show up. Just "File record segment XXXXX is unreadable" errors about a million of them.
 

A:Compaq Presario 2500

Suggest you stop using the drive until you can recover the data.
It is likely that drive has failed or is going into total failure.
You can purchase a replacement drive for $42 to $75 depending on size and whether you get the 5400 rpm or the 7200 rpm in a 40, 60, or 80 GB model.
You can obtain an adapter to put the drive into a desktop unit as a slave. The adapter converts the mobile 2.5" hard drive by adapting the pin set for the desktop EIDE cable. Adapters are available many places, including www.geeks.com, www.cyberguys.com, www.frys.com, www.outpost.com, and others... cheaply at $2.45 to $9.99 depending on where you get one.
Then you can usually drag and drop the data from the mobile drive to a desktop drive, or use drive recovery software, then you can burn a CD to then migrate it to your new drive... or just use a USB transfer.
( We work on a great number of the Presario 2500's with identical problems. Did you know there are 434 different models of the Presario 2500 series of laptops?)
With the new drive, you just use the recovery set that came with your laptop, or buy the set for about $30, including shipping, from the Compaq parts department.
But you likely will not ever be able to use that drive again. Thus, you do not want to stress it further by more restart or rescue attempts.
 

4 more replies
Answer Match 56.7%

hi,

Iam siva.I need all the drivers of compaq presario c770us because some of the drivers are not functioning properly it has become a serious problem for me for many days.I will be vey grateful if you suggest me a positive reply.Thank you.
 

A:compaq presario drivers

10 more replies
Answer Match 56.7%

I need to replace HD in my Compaq but I can't seem to get the plastic cover off front without forcing it. I am afraid I will break it. Any suggestions?
Thanks for your time.
Jerry L.
 

A:COMPAQ PRESARIO COVER

Well you didn't say it so I will ask. Are you sure the front cover has to come off. Most cases you just remove the screws on the back, remove the back metal shroud, and access the machine from there. A few cases have the front covers come off but the majority don't.
 

1 more replies
Answer Match 56.7%

I have a compaq presario 1650 laptop. It currently has a different language version of W98 installed. I want to format and reinstall the english version. The person I got the laptop from no longer has the compaq installation disk. Is it possible to format the harddrive and reinstall with the drivers that are located on compaq's site?
 

A:help with compaq presario 1650

As long as all the drivers are there, sure.

I've redone plenty of laptop machines. Just make sure the site has drivers for all the parts first, and get them all downloaded before you start.

------------------
Get free stuff and help out a poor computer tech:
LarryCore begs for money
 

1 more replies
Answer Match 56.7%

i have a question...a while ago my Presario battery died -- it wouldn't charge or discharge, the laptop could only work on the AC, but the indicator showed the correct % of the charge... I bought a new battery and it worked fine for a week, but I decided to reinstall Windows XP, and from then on, it's been a rollercoaster ride for me (( First, it worked fine, but the laptop started to freeze every 20 minutes. I followed the COmpaq's people advice and updated BIOS for some battery controller thing and updated the video driver. From then on, the problems with my new battery just started to overwhelm me First, the battery wouldn't charge when the laptop was ON. Then somehow it did charge. I decided to calibrate it, and now it doesnt want to charge -- on or off. The red light indicating the battery is flashing -- as it's not charging, and the indicator says "0" % of course.
Does anyone have any ideas?? Please? This only started after I reinstalled the Windows, so I am sure it's not hardware or the battery, everything worked just fine ((
Please help me!!!! Thanks... I'm desperate....
 

A:Compaq Presario 700 and battery

6 more replies
Answer Match 56.7%

Hi

After unsucessfully trying to get rid of some nasty Malware (Antivirus XP Pro 2009 to be precise) I'm currently trying to perform a factory reset on my Compaq Presario SR1909uk which had Windows XP.

I'm performing this from the recovery discs I created when I bought the PC.
However, I keep getting various error messages saying either

'Cannot copy file C:\1386\APPS\APPS15417\src\VIRUSCAN7.DAT or

C:\1386\APPS\APPS15417\src\Setup\asCore\Antispam\btevclid.dll\MANIFEST\asnmobj.spm

I keep aborting when I get these messages and the progress perecetage remains. If I do this until I reach 100% do you think it will work?

Other than buying some new recovey discs from Compaq or taking it to be fixed, are there any alternatives please?

Thanks

A:Compaq Presario SR1909uk with XP

Try cleaning your Recovery disc.

3 more replies
Answer Match 56.7%

Compaq Presario 3000+ AMD Sempron processor
Windows XP SP3
1 gig PC2700 memory
80 gig IDE HD
430 watt OS
Video and sound add in cards

On power-on the power light comes on, and the fans run, monitor is black.
 

A:Compaq Presario - no boot

16 more replies
Answer Match 56.7%

Recently took some hits on my Compaq Presario 7478 system. Got two or three nasties via the 'Net. After McAfee's virus scan and removal, began experiencing weird happenings, such as system closing down and restarting. Then just not starting. Tried a few remedies [probably inadvisedly], and finally the system seemed to hang on my restore at the same place repeatedly.
Ultimately the system could no longer establish my OS. Restore failed.
Bottom line: Could not invoke computer restore. Could do nothing with this computer.
Q... Being compaq is the BIOS set to a certain condition that would prevent my reformatting the hard drive and restablishing an OS? Is this an option I can override? If I were to piggy-back the existing hard drive onto an operating hard-drive and reformat would that solve this problem and permit me to then create or repair the hard drive subsequently to get my compaq back?
Sorry this is so wordy...
 

A:Compaq Presario dead

Have you tried disabling System Restore; then re-enable for a fresh start?

Failing that, format and install OS per instructions in your manual or the CD which came with your computer. If no CD, the OS should be installed in .cab files in Windows Explorer.

The BIOS should already be properly set
 

3 more replies
Answer Match 56.7%

All of a sudden, my Compaq Presario, Windows XP, won't boot up past the black "COMPAQ" screen. None of the keyboard keys respond (we've tried three different keyboards). All the lights light up when we first turn on the computer, but then it just stops at the black screen with boot options, but none of the keys on the keyboard will do anything. Does anyone know what the problem might be?

A:Booting Up Compaq Presario

Have you tried booting into "Safe Mode" to see if its a software/driver issue?

4 more replies
Answer Match 56.7%

Okay. At work I have 2 Compaq Presario PC's. One is model SR1010NX and the other is S5010NX. They're fairly old. I have a Ubuntu 10.04 server set up that acts as my DHCP/TFTP/Samba server for booting with PXE, then installing the selected system and my custom application suite using only literally 2 minutes of my time to type in such details as the CD Key, Computer Name, etc.

So anyway, back to my Presario problems. Both computer conveniently do not have a Network Boot ROM (for example nVidia Boot Agent). So if I try to boot from network, Ill get a "Disc Failure". The S5010NX will not boot with a USB drive plugged-in period. It will get stuck on the red "Compaq" screen. If I unplug the device, it boots into BIOS/OS perfectly fine. If Im in the BIOS, and I plug the device in, the BIOS turns non-responsive, when I remove it, it starts responding again. Weird.

Here the 2nd chat session I've had with HP Professional Support (or whatever it's called). All I have to say is, I knew more about computers when I was 12 then these guys do.





Print active chat
[Tuesday, September 07, 2010 5:44 PM] -- Automatically generated message:
A support specialist will be with you shortly.
[Tuesday, September 07, 2010 5:44 PM] -- Automatically generated message:
You are now chatting with support specialist Priya K.
[Tuesday, September 07, 2010 5:44 PM] -- Priya K says:
Welcome to HP Total Care for Desktops. My name is Priya. Please... Read more

A:Compaq Presario headaches

Whoa! You're using this dinosaur? o_o
 

2 more replies
Answer Match 56.7%

I have had this PC since 2001 and it seems to be in good working condition. It originally came with Windows ME and two years ago, I upgraded the OS to Windows XP. I need help to clean the computer and start over as new. How can I do this?

Thanks

More replies
Answer Match 56.7%

Hello:
I'm making some changes to a compaq presario 4660 (dinosaur) and it's running windows 98. I cannot get into bios. F2, F1, delete and Tab do not get me in. I searched on google and really didn't receive good results. Well it did say that F2 would get me in, but it does not. Seemed to me there was another way to get into bios?
 

A:compaq presario 4660

16 more replies
Answer Match 56.7%

Hi, i'm having a problem turning on my laptop. I'm using a Compaq Presario C502US. I've been using the AC adapter that came with the laptop but eventually the AC adapter became loose and broke. The charging icon (lightning symbol) wouldn't turn on anymore and I think the laptop has now run out of power. I've finally received a new adapter and when i plug it in the charging icon lights up. However the laptop still won't turn on. I've waited for about 2 hours but it still won't turn on. When i click the power button, the Power turns on and then it blinks. The Fan turns on for about 3 seconds but then it goes off and the power light blinks and the monitor won't turn on. Can anyone help me with this problem?
 

A:Compaq Presario won't turn on

Remove battery and power adaptor (ie all power out)

Hold down the ON button (to disperse all internal power)
Plug the power adaptor back in only (and to wall socket!)
Turn on!

If it works, turn back off, and re-install battery, turn On
 

5 more replies
Answer Match 56.7%

i have recently formatted my hard drive and reinstalled xp home, i have found all the necessary drivers etc but unable to use my mouse, on the device manager a yellow icon appears stating unknown device, iv searched everywhere for drivers etc but all came blank, i went to the compaq site and downloaded the mouse/keyboard driver from there but then got an error stating unable to find version of runtime to run this application '' iv downloaded the most recent .NET framework and still nothing, iv searched for more help but unable to find any results, anyone got any pointers if im doing something wrong ?

A:compaq presario S5600UK

What is the make and model # of your mouse?
In Device Manager, right click the Unknown Device and Uninstall it. Now remove the USB cable for the mouse from the computer end. And restart the computer. When the computer comes back up, plug in the mouse into the Back USB port of the computer and not the front or through a hub as these ports are weaker. It should install. if not, go to the mouse manufacturers support download drivers site and type in your model # and download the driver.

1 more replies
Answer Match 56.7%

Appreciate some assistance.

Trying to help a friend with some computer issues. Doing it over the phone. He has a Compaq Presario EZ 2605 pc.

Anyone know of a website where there is an actual picture of what this type of PC looks like? Tried the Compaq site, but have not found a picture. Looking for a picture, and a manual, if possible.
 

A:Compaq Presario EZ 2605

Found a site with photos.

Please close post.
 

1 more replies
Answer Match 56.7%

Just throwing this out in case someone can help

I have a Compaq Presario 5461 and when the hard drive crashed I got a new hard drive off ebay (same model the pc came with). When I try to use the compaq restore disk, i get an error that pretty much says restore can't be run on that machine. I realize that these restore disks are somehow keyed to the machine so you can't use them on another machine, but all the hardware is the same except for a little more memory. Only thing I can think of is a bios update that I applied. Did that alter the "signature" of the PC. If so, would it work if I backed of the bios update?

At this point the pc is just a toy, i'm using it to learn more about hardware, etc. I was able to install windows and just used my license key that came with the computer, so thats not an issue. But it bugs me that I can't get this restore to work. I did also notice that PC does not have an asset tag - wondering if the bios update zapped that.

Other notes - there was no extra partition that I know of on the orig hard drive, and there is only one restore CD (no diskette). I was able to do a restore of the pc several years ago
so I am pretty sure the disk is not defective.

Any help or thoughts would be appreciated
 

A:Compaq presario restore

a different hard drive than the one the pc came with shouldn't alter the restore process.
What error is it giving you?
 

4 more replies
Answer Match 56.7%

I have this old Compaq and I used to be able to burn CD's until the day I stuck in my little portable device one would use to store pictures and things..I forget what its called,but you can insert it into a USB port then add or remove pics or anything and remove it and put it back around your neck and go. Anyway after doing this one day I go to burn a Cd and my computer is telling me I have these new drives called E,F,G, & H, which it has now bundled into something called a USB mass storage device. it no longer recognizes that i have a working burner.. it does not even recognize that I have a drive D. All it is reading is those removable device drives that came along with my junk drive. The 'Safely Remove Hardware" option has been coming up and ive used it to disable these other drives..but its still not working..How can I fix this?

A:compaq presario SR1103WM

Right-Click on My Computer, select Manage. In the left pane there should be a listing for Disk Management - click that.

Now, in the right pane, scroll down and see if your CD is listed, but has no drive letter. If so, right click on the grey part and choose "assign letter". I would use Z: (no chance of a USB device trying to grab that letter).

3 more replies
Answer Match 56.7%

I have an old compa presario 1277 who supposedly had something called a monkey virus on it. This virus supposedly wipped out all the drivers. Someone reistalled them. However, my husband insist the monitor display does not look like it did and that it use to play movies. Do you have any suggestions?
 

A:Compaq Presario 1277

Is it this Presario 1277 notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=95012& ?

If so try reinstalling the Trident Display Driver from the available downloads.
 

1 more replies
Answer Match 56.7%

Appreciate some assistance.

Anyone know how much memory the Compaq Presario EZ 2605 (out of the box) had?

Believe its processor is an Intel Celeron 633MHz.

Trying to help someone out who knows very litttle about computers and cannot tell me how much memory the pc has. (He does not understand how to look up the info in My Computer/Properties, etc.)

Asked Compaq a week ago, but still no answer.
 

A:Compaq Presario EZ 2605

Manufacturer Compaq
Model Presario EZ 2605
Maximum Memory 512MB
Standard Memory 64MB removable
Number of Slots 2 (2 banks of 1)
 

3 more replies
Answer Match 56.7%

i want to upgrade my computer so it can run windows xp and i'm not talking about minimum stuff i want to try and get da best out of windows xp, so wut should i upgrade?
 

A:Compaq Presario EZ2207

8 more replies
Answer Match 56.7%

my mother bought a compaq presario 5304 from a family member.when she got it,there was no system recovery disk for it.there was a disk that was for the 700's series.her computer will not detect the right drive because they used the wrong recovery disk for it.how do we get the computer to recognize and install its original drive.it was 56k.i am pretty much computer illiterate.john
[email protected]
 

A:compaq presario 5304

hmm system recovery. I'm not too big on using that. My overall suggestion would be go into dos at the startup and do a simpe C:/ format or is it the other way doh... Anyways at startup of windows press oh F8 I believe for systems with win 98 or higher but if you got win95 its either f5 or f8 or you can make a boot disk and do it that way.
 

1 more replies
Answer Match 56.7%

hi guys!I have a problem with my laptop unit..I download the ATI mobility radeon hd 5430 and i install it but there is a message in the end of installation appear that INSTALLATION COMPLETE(WARNING OCCURRED DURING INSTALLATION) and when i press the view log it always like this:


Existing packagesATI Catalyst Install Manager
The Lord of the Rings FREE Trial
Microsoft Visual C++ 2008 SP1 Redistributable
Communication Opt-in

Packages for install
ATI Catalyst Install ManagerFinal Status: Success
Version of Item: 3.0.790.0
Size: 20 Mbytes


Other detected devices

Error messages



I dont know what to do..please help me..
 

A:Compaq Presario cq-42-160tu

Make sure you have all the Windows .NET Framework Updates installed before you update the ATI catalyst driver
 

1 more replies
Answer Match 56.7%

Hey everyone I am having the same problem again as I was having before with my Compaq Presario 5000. It seems to just freeze up when I am on it or not. Sometimes I try to move the mouse to get back into Windows from the screen saver and it does nothing. At all! And sometimes in the middle of surfing the web and listening to music it just freezes up again and I have to hit the power button just to get it back up and running. Can anyone help out with this? I was asked to run MemTest before but I have no idea how to do this, so could someone help out? Also, since I am not a complete newbie, but darn close when it comes to the whole hardware side of computing, how can I tell what is causing interference with what when it comes to the hardware I am running and wether or not the latest drivers are installed? Thanks again and hope to get this resolved quickly.

Compaq Presario 5000
UWAVE Motherboard
832MB RAM
AMD Athlon 901Mhz
eVga GeForce2 mx 400 64MB PCI
Sound Blaster Audigy 2 ZS Platinum
Sony DRU-530 DVD +-Drive
Windows XP Home SP1
 

A:Compaq Presario Freezing up again!

13 more replies
Answer Match 56.7%

I have a compaq presario and that is in serious need of a new processer. The one I currently have is a cyrix M II-366 at 250mhz. I origenally had plans to overclock it but I feel it would be best to leave it be and buy a new processer. what I wanted to know is would I have to buy a new motherboard inorder to upgrade it to 1gig? By the way, you would'nt happen to know why it says 366 and runs at 250. All your help is greatly appreciated.
 

A:upgrading compaq presario

Look in your manual. Compaq has the upgrade path documented very well in it. I really doubt your FSB is at 250MHz tho
 

1 more replies
Answer Match 56.7%

Hello - I am attempting to get an old Compaq Presario 9546 that I obtained work correctly. I am, however, at a loss to figure out what the heck is wrong. When you boot the computer, it does the RAM check, and appears to skip past all BIOS functions (I can't go into BIOS setup... it does not exist) and then all it says is "Non system disk, please replace and press any key" - which, BTW, I have no disk in at all. When I DO put in a system floppy, it will boot from the floppy but not aqnowledge that anything else but the floppy is hooked up to the computer (I have 2 hard drives and a CD rom drive - all with the correct jumper settings). Any ideas? If I could just get BIOS to come up, I could probably fix it myself...
 

A:Compaq presario 9546 help

8 more replies
Answer Match 56.7%

My compaq was working fine until one day it just went off during a user session. Pushing the power button made it try to start but when it began to load windows 98 it quit again. After serveral retries it finally started up again. It ran OK for about one week , then just went off again. This was during a user session.(user session meaning it was in use at the time). I tried to restart it but it would not restart. Finally it tried to start, then said press F2, then the video went out. Nosthing shows up on the screen now. When powered on you can hear the hard drive start up but that's about it. The three year warantee lapsed about a year ago . I was wondering whether or not this has something to do with the cmos battery. Apparently several people I know who purchased a Compaq laptop have run into the same problem. I have a friend who owns an IBM thinkpad which has done precisely the same thing. Any suggestions.
Sincerely
Frank
 

A:Compaq presario 1200XL111

It is possible for the cmos battery to cause similiar problems, but from what you are saying it looks like a processor problem. For the system to just shut off in the middle of being used and unable to start up again, shows the possibility that the processor has overheated and the machine has powered off, however because the machine is still too hot it wouldnt fully start up again.
To say that your video has then gone, could mean the processor is completely knackered, signs of life can still be seen from the machine but nothing will appear on the screen, in most cases the monitor will stay on standby even when the machine is powered on.

I suggest a new processor, with new heatsinc and fan.
 

3 more replies
Answer Match 56.7%

Hello all,

My 92-year-old grandfather -- who lives on a little island off the coast of Maine -- has emailed me regarding a problem that he is having with his ten-year old computer. If anyone out there would be kind enough to offer some advice on how to fix it, it would be greatly appreciated. There are no computer shops on the island, but my grandfather has plenty of tools and has worked extensively with radios throughout his life, so with some direction I have little doubt that he can make the repair.

This is an unconventional post, to be sure, and I don't really know anything about his computer ... but I think he has done a reasonable job describing the issue:

Hi Chris!
I have a severe computer trouble that I brought on myself.
First I will describe the computer and it's programs.
It is a Compaq, Presario 1200,
at least 10 yrs old.
Along the front edge of the top it has three indicator lights at the
left of center and three on the right.

The ones on the left are operating lights of which one shows when
the charger is in and the left most one shows when the computer is
started up by the button which is in front of the screen.
The one between these two shows the operating conditions, I believe,
as it usually flickers in concert with whatever is going on.
The three on the right each has a "locked padlock" symbol.
For programs it has Windows 98, Juno V.4, Intel Create and Share
and some other good things.
Everything has been working good.
I do... Read more

A:Compaq Presario Issue

What a sweet letter from "Grumpy Gramp"! Has he tried to plug in to another outlet completely? I would take the battery out completely and try this.

fyi: http://en.wikipedia.org/wiki/Compaq_Presario_1200
 

1 more replies
Answer Match 56.7%

i have a compaq presario SR5210NX with windows vista home premium ,it has a problem in/windows/system32/ntkrnlpa.exe,the state is 0xc0000225 and the information says the kernel doesnt responde or isnt working .it says introduce the installation disk windows ,but i dont have it and i couldnt enter to the recovery system

More replies
Answer Match 56.7%

Hello sir, I have a problem in bios password. I tried to reset cmos by removing rtc battery. But i can't remove password. System disabled code is 07437. Thanks, MNKTags:Microsoft Windows 7 (32-bit)Presario V3000

A:Compaq presario v3000

@Ulies? Enter   zyaztrq    or    alqelqe REO

1 more replies
Answer Match 56.7%

Hey all,

I have this older Compaq Presario 7470 CPU, and I can't figure out how to open it. It doesn't have any buttons that pop open the chassis, or at least any that I can easily spot. I got a memory upgrade for it, and would like to put it in. Anyone know how to pop this thing open? Please email me or just reply here. Thanks!

Thanks,
Matt
 

A:Compaq Presario 7470

Here's a link to their site with instructions.
 

2 more replies
Answer Match 56.7%

Hello, i have a compaq presario desktop. here are the specs:
512 mb ram
Windows vista
10 gb hard drive
amd athalon xp2 prossesor.

My problem is that is so slow.
 

A:compaq presario 6000

7 more replies
Answer Match 56.7%

Have a Compaq Presario 1020 - laptop. Info is as follows -
Series 2900A
Model FBV1433VQL1J
Serial V644HZD50299

Need a maintenance manual. Any help would be appreciated. Thank you.
 

A:Compaq Presario LAPTOP

Google Compaq for a contact number - ask them to send you a manual..
 

1 more replies
Answer Match 56.7%

Hi Everyone, I am new to this site and really need your help. I have a compaq presario desktop sr1725an and I need to run a complete recovery on the system. I have tried everything the hp site tells me, but so far nothing works. I really need recovery discs for this computer, it currently has xp loaded. Does anyone know where I can download recovery disks for this computer, I want to restore it to its factory settings.

Please, any help would be great.

Thanks!
 

A:Compaq presario sr1725an

7 more replies
Answer Match 56.7%
Answer Match 56.7%

I was not sure just where this question should go so if this is not the right place please feel free to relocate it.

I have THIS desk-top:

Hewlett-Packard Compaq Presario CQ2723wPC
Windows 7 Home Premium 64 Bit
AMD EI-1200 Accelerated Processor
Memory = 4GB/G(something I can't make out) DDR
HardDrive = 500GB/
I am running a PPS PE9 photo effects program that is only working about 50%

I have found the minimum requirements for running this particular program:

Open GL 2.0 capable video card with 256MB dedicated RAM
Memory 8GB+

How do I find out what kind/size of video card, how much dedicated RAM, and available memory my unit has ?

If my unit is falling short in any of these requirements, is this something I can buy and is it within my abilities to make the necessary improvements ?

I am quite mechanically/electrically adept but I know little about the insides of a computer.

Thanks for reading.
 

A:Compaq Presario Particulars ???

The Compaq Presario CQ2723w Desktop PC(H2L89AA) comes with Windows 7 Home Premium SP1 64-bit and comes with this hardware:
Pegatron APXD1-DM(Redwood A) motherboard
AMD E1-1200 APU 1.40 GHz dual core processor which has an average benchmark score of 682
4 GB of DDR3-1333 RAM
Intel Radeon HD 7310 graphics which has an average benchmark score of 171
Realtek ALC662 high definition audio
Atheros AR8152 10/100 Mbps ethernet
500 GB SATA hard drive
Super-multi DVD burner disc drive
65 watt power supply

If you wanted a desktop that's speedy and has plenty of hardware upgrade options, you couldn't have picked one much worse than this one.
Its motherboard has no expansion slot for adding a graphics card, so you're stick with its wimpy integrated graphics which uses up to 1961 MB of shared memory.
Its slow wimpy processor is soldered to the motherboard and not upgradeable to a faster one.
It has only 4 GB of RAM, but it supports 8 GB, so you do have the option of adding more.

----------------------------------------------------------------
 

1 more replies
Answer Match 56.7%

Here we go again, guess I am good at getting stuck on stupid, we bought five of these HP 'debranded' machines. I have a M2NBP-VM CSM mobo. I have almost everything working except the audio. Two errors in device manager PCI device and unknown device. I am suspecting that it has to do with audio since I can't get any audio going period. Yepper done the aau high def audio driver thing, chatted with HP support etc etc ran driver issues into the ground. I am using xp pro sp3, I know these things shipped with MCE and they say there vista ready.....hmmm but no xp drivers. So any of ya'all got some advice? thanx
 

More replies
Answer Match 56.7%

I hit the power button this morning and nothing happened. Tried unplugging and holding power button in and still nothing.
 

A:compaq presario will not turn on

Please post your system specs, exact model Presario, include any upgrades or modifications please.
 

1 more replies
Answer Match 56.7%

I've searched this site, I've asked HP/Compaq, and I've checked search engines but still don't have an answer, so wondering if I can find it here.
I have a Compaq Presario 700 with what I believe is a dead hard drive. I want to replace it, but not sure if it is necessary to copy the files from the drive first. I don't think it's possible, as the drive doesn't seem to work at all. Can I replace it with a new (upgraded) hard drive and just run the original Windows QuickRestore discs, or is there something more to it that I would need?
Here's what happens: I switch the laptop on and it wants to start up, but then, before Windows is running, the hard drive begins it's lovely scraping and clunking noises and I eventually get a black screen with plain text saying windows had to shut down... and is beginning dump of physical memory. Of course, this all started after some fool (maybe me, maybe not) dropped the laptop.
Every site I've checked says I'll need to create a backup of all files before replacing the hard drive. I didn't have anything on there that I need to save, so am wondering if I can just run the QuickRestore and get back to business as usual.
 

A:Compaq Presario HDD replacement ?s

Welcome to the TSG forum.
Which Compaq Laptop ???
http://h20180.www2.hp.com/apps/Look...ery=Compaq+Presario+700&submit.x=9&submit.y=3

Have you backed up all your personal Data ??

Yes .. just put in a new HD .. and run the recovery CD/DVDs
This'll put it back to the way you bought it .. assuming no other problems.
 

2 more replies
Answer Match 56.7%

Hello,

I have a Compaq Presario 1247 Notebook (laptop) with Windows 98 Second Edition with a 4.3 Gigabyte hard drive that was logically partitioned into 2 drives (C: and D: ). Earlier this year I used my CD Burner to copy all of the Quick Restore files from the D: Drive to a blank CD-ROM (CD-RW) disk and then removed the partition from the hard drive with a program from the Compaq Website. My CD-Burner is connected to my Notebook via a PCMCIA USB 2.0 Card, it has 2 USB Ports on it, one port is being used by my CD-Burner the other port is not being used.

Last Friday (09-24-2004) my Notebook caught a virus while I was on the internet and it was corrupted. MS Windows Explorer error message came up when I tried to look at my hard drive. The error message also came up when I rebooted, therefore no desktop icons appeared. So I reformatted the hard drive C: and put the Quick Recovery CD-ROM Disk in the internal CD-ROM drive. However, the Quick Recovery Disk displayed a message that it could not find the Quick Restore files and to contact Compaq Customer Support. I reformatted my hard drive again this time with the /quick format switch and /make system disk switch and then copied all the files and subdirectories from the Quick Recovery CD to my hard drive. Now before I even tried to run FDISK to repartition my hard drive into 2 logical drives I thought I would put the CD (CD-RW) containing all of the Quick Restore files and subdirectories that I burned earlier this year (before I r... Read more

A:Compaq Presario 1247 - Need Help

have you tried the ultimate boot CD:

http://www.ultimatebootcd.com/

It containes many utilities that might help.

it is bootable so it should load

Steve L
 

2 more replies
Answer Match 56.7%

I bought a presario 1500 that I had assumed had a problem with green lines that were on the lcd and external monitor. The lady who owned it had taken it apart and sold it to me that way. I bought it today and tested it when I got home. I powered it on and I saw that the fan will move slightly but won't start and the hard drive will start but shuts down after about 5-10 seconds. The power light always stays on but nothing else. I noticed when I unplug the hard drive and battery inverter board(see link) it will shut off the power light. Could that be the problem? I don't see how the motherboard could break when it was never used. Anyone have some advise?

http://cgi.ebay.com/COMPAQ-PRESARIO...ameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting
 

A:Compaq presario won't turn on

This looks like a power supply controller card issue. Also some systems will not run if the CPU fan is not working. You need the battery inverter board in place to power the system and light the light.
 

23 more replies
Answer Match 56.7%

hello recently my pc has been failing to start up and asking to go to the start up repair my pc is fine but will this lead to future problems

thanks ~shadow

A:compaq presario cq60 help

Hi and Welcome to TSF!

What did startup repair find?

Do you have your Windows cd?

2 more replies
Answer Match 56.7%

Please i desperately need help, have got compaq presario 3015us(never buy it) P4/512ram/60 gb h.disk etc etc.... the problem started when i woulds scan norton antivirus, the system would juz freeze, tried it a lotta of times but same prob, then i started gettin error msgs sayin ISAAC.DLL error...then RUNTIME.DLL error.. then i wanted to restore it to a previous date, but there the calender would be stuck at oct and i wanted to restore it to september...

then i tried using the compaq recovery disk, the disk after 2 mins of running, would shut down the computer again, same thing happenned 3-4 times and next time gave some error sayin cant access drive H (dont have drive H) and enter but nothing happenned.... then i got my hard disk formatted but now ot shows "NO DISK SPACE" whereas i have 60gb and same problem of shutting down keeps happenning when the disk runs...pls help....

is it a prob with the motherboard or hard disk or juz something else....pls pls help!!!!
 

A:COMPAQ PRESARIO 3015us(HELP!!!!!!)

hmmm, when you formatted the hard drive, did you FDisk it prior? When I worked for Gateway tech support, we had a little saying, "if nothing else, then FFR"... which meant FDisk, Format, THEN reinstall OS, in that order. Give that a shot with a windows ME bootdisk. You can find the download at bootdisk.com
 

1 more replies
Answer Match 56.7%

We have an old 2001 compaq 5020 computer. The last screen you see when you shut it down is , it is now safe to turn off your computer and then you have to shut it down manually. How can we change this to turn off automatically. We are running Windows XP.
Thanks
Bilmac

A:Compaq Presario 5020

Hello bilmac1. Probably, when Windows was installed, it failed to recongize the BIOS as ACPI compatible. Or simply, APM is not enabled: check under "Power Options Properties" if the tab "APM" exists; if so, check the option "Enable Advanced Power Management Support" (if it's checked, uncheck it, weird as it sounds).

1 more replies
Answer Match 56.7%

hi,
I have a compaq Persario M2000. The other day, I was using the touch pad to move and it just shut off. I tried to turn it back on and nothing happens. When I look at the AC adaprter led it is not turned on and it is plugged in. I removed the battery and tried the same with no luck. the ac adapter led is still not light up. The battery is fully charged, and when i try just that nothing happens. I opened it up and removed the bios battery and checked the chips and circuits. nothing seems out of place ot burnt. I used a multi meter to check the power button and it is getting power, as well as the curcuits in the ac adapter
can someone help me or give me some ideas what my nxt step is?
thanks
 

A:Compaq Presario Will not turn on

I had similar problems with compaq laptops - it's the power supply in your laptop - the repair for that is about $300+

check your warranty before doing anything else...
 

2 more replies
Answer Match 56.7%

Iam wondering if this latop can play all three games of WoW

:HERE ARE THE SPECS FOR THIS LAPTOP:

Processor
Intel® Celeron®

Processor Speed
2.2GHz

System Memory (RAM)
2GB

Computer Hard Drive Size
160GB

Graphics
Intel® Graphics Media Accelerator 4500M

System Bus
800MHz

Video Memory
Up to 797MB (total available)
 

A:compaq presario CAN IT PLAY WOW!?!?!?1

Eek, Celeron!

Yes it can play WoW. The system requirements are as follows:

Intel Pentium 4 1.3 GHz or AMD Athlon XP 1500+ processor
512 MB of RAM
3D video card with Hardware T&L with 32 MB Video RAM

You meet the requirements.

Also, may I direct your attention to the stickies above:

http://forums.techguy.org/games/474815-how-tell-if-your-computer.html
 

2 more replies
Answer Match 56.7%

I really don't know that much about computer but i have a compaq presario v6000 and i just brought a new hard disk drive ST9100824AS and i trying to put on windows 7 and its saying no IDE found when i run diagnosis test. When i go to run the windows 7 disk i get to the installing screen and its doesn't find hdd. I need some help. Thanks

-MaxG

More replies
Answer Match 56.7%

Not sure if anyone can help here but worth a try.
I brought a new compaq presario desktop pc just before xmas. I got sick of all thier crap on it so I re-installed with another copy of windows xp prof sp2. Now I am having problems and want to go back to the original installation on the compaq.
Didn't do any restore disks as no-one explained this to me then. The install partition is still on the compaq but when I load up comp and try to press F10 to do it, it doesn't work (just keeps loading into windows). I can not figure out how to get the reinstall to start and am not sure how to do it manually. My brother has tried to manually start it in windows but it doesn't like this. Have tried changing the boot drive using the Esc and F1 keys as per start up options but it has the drive as grouped and can not specify H drive (where compaq restore is).
Any suggestions welcomed before I have to find more money to buy disk!
My brother has suggested that maybe we can delete the c drive partition therefore forcing the h drive to run, but want to leave this as a last result in case it doesn't work.
Thanks to anyone who reads this.
Ange

A:Need Help With Restore Of Compaq Presario

Ok Frad, if you want to restore the system to the way it was when you purchased it, the best way is to place the restore cd in your drive and restart. when the option comes up press what ever key you ned to to enter setup. scroll through the setup untill you can change the boot options. place the cd drive as your 1st boot option. when you have done that, save and exit setup. when the system reboots, you will be given the option to restore. READ THE WARNINGS CAREFULLY, THIS WILL FORMAT THE HARDRIVE AND ERASE ALL THE DATA THAT YOU HAVE. I recomend that you burn a copy of all your important files prior to doing this and good luck.

Printboy67

4 more replies
Answer Match 56.7%

Hello Sir,
         My Name is Baldeep Singh, i have a problem with my Hp Compaq Presario C700. When i power on the laptop its display is dosen't respond anything but the laptop is running ok because all the led panels are blue and the HDD led also blinks. I tryed my level best but its of no use. i read all the instructions in internet and did as the same but of no use. Came you help me.

A:Compaq Presario C700

Have you tried using an external monitor to see if the problem is with the display?

4 more replies
Answer Match 56.7%

I have a compaq Presario and I want to format the hard drive. This unit has a c:PRESARIO with 68.56 GB 16.7 used and 51.7 free File system NTFS and d: Presario_RP 5.98 GB, 4.49 Used, 1.49 Free, File System FAT32
Is there anything I need to know befor I do this?
I can not find the org. disc that came with the computer, but i have my xp disc from my lap top will that be ok and or do i need that
I ran the malware and found 16 viruses. A lot to do with tool bar locations or something.
The system is still running extreamly slow takes forever for the "MY COMPUTER" screen to load.
I did find that it runs like new in safe mode if that helps.
Please help
Paula

A:Compaq Presario very slow

I have a compaq Presario and I want to format the hard drive. This unit has a c:PRESARIO with 68.56 GB 16.7 used and 51.7 free File system NTFS and d: Presario_RP 5.98 GB, 4.49 Used, 1.49 Free, File System FAT32Is there anything I need to know befor I do this? I can not find the org. disc that came with the computer, but i have my xp disc from my lap top will that be ok and or do i need thatI ran the malware and found 16 viruses. A lot to do with tool bar locations or something. The system is still running extreamly slow takes forever for the "MY COMPUTER" screen to load.I did find that it runs like new in safe mode if that helps.Please help PaulaIf you have all of your pic`s, music and anything else of importance backed-up then you are all set.You probably did not get any discs with the computer. The D: drive is a "restore partition" = RP. This is an exact image of your computer when you first bought it. To use it: When you first start the computer there will be a black screen with probably three different choices of keys to press. One of them will be something like system restore or restore. Hope you get the idea. Select the proper key and follow the onscreen prompts.One other option may be to go to the HP\Compaq (HP bought Compaq) site or call them. You may be able to get the discs for a small fee.

1 more replies
Answer Match 56.7%

Hi, how do you restore to factory settings a (COMPAQ PRESARIO SRI617CL)?

A:(COMPAQ PRESARIO SRI617CL)

If this computer has a Recovery Partition, when you boot the computer on the logo screen you should see a message Press F2 for setup and Press X for Recovery (X being F11 or whatever key it says) If you don't get that message, then this computer does not have a Recovery Partition (if you can still boot the computer you can look in Disk Management to see if there is a drive called Recovery)
Other then that you will need the recovery discs you made when you got the computer. How to Run Compaq Recovery Disk | eHow.com

1 more replies
Answer Match 56.7%

i have a lap compaq presario v3417la i used win vista , then i move to win 7 ultimate , and disconect sound device , can you help me ? please

-[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]------------------------------------------------------------

Versión EVEREST v2.20.405/es
Sitio Web http://www.lavalys.com/
Tipo de informe Asistente de informes
Ordenador LUISGUZMAN-
Generador Luis Guzman
Sistema operativo Windows 7 Ultimate Media Center Edition 6.1.7601
Fecha 2011-08-19
Hora 12:59
--------[ Resumen ]-----------------------------------------------------------------------------------------------------

Ordenador:
Sistema operativo Windows 7 Ultimate Media Center Edition
Service Pack del Sistema Operativo Service Pack 1
DirectX 4.09.00.0904 (DirectX 9.0c)
Nombre del sistema LUISGUZMAN-
Nombre de usuario Luis Guzman

Placa base:
Tipo de procesador Mobile , 2000 MHz
Nombre de la Placa Base Wistron 30D6
Chipset de la Placa Base Desconocido
Memoria del Sistema 960 MB
Tipo de BIOS Phoenix (11/27/08)

Monitor:
Tarjeta gráfica GeForce 7150M / nForce 630M
Tarjeta gráfica GeForce 7150M / nForce 630M
Monitor Monitor PnP genérico [NoDB]

Almacenamiento:
Controlador IDE Controladora estándar PCI IDE de doble canal
Controlador IDE Controladora estándar PCI IDE de doble canal
Controlador IDE Ricoh Memory Stick Controller
Controlador IDE Ricoh MMC Host Controller
Controlador IDE Ricoh xD-Picture Card Controller
Disco duro WDC WD1600BEVS-60RST0 ATA Device
Lector óptico MAT... Read more

A:Compaq presario v3417la

Not too sure what you need help with.
Do you mean the sound does not work since upgrading to Windows 7?

This is because the existing audio driver is not compatible with Windows 7, and unfortunately HP/Compaq do not have any Windows 7 drivers for the Presario V3417LA. The Windows Vista driver might work. You can download it from here:
http://h10025.www1.hp.com/ewfrf/wc/...3&lc=en&cc=us&dlc=en&sw_lang=&product=3437668

Click the 'plus' symbol next to "Driver - Audio", then click "Connexant high-defintion audio driver".

If this driver does not work you will have to use Google Search to try and find one that does.
You really should have checked what drivers were available from the Compaq website before upgrading to Windows 7.
Some older laptops are just not suitable for upgrading to Windows 7 because of possible driver issues.
 

1 more replies
Answer Match 56.7%

I'm trying to reformat my mom's old Compaq Presario SR1303WM. I've set it to boot from the cd-rom and I almost had it. But after deleting the partitions and starting a clean install it would only load the programs to 20%. After that it locked up and wouldn't do anything. I had to shut down and restart.

Now, it won't load from anything. Of course the old OS is gone so it won't start up on the hard drive and it won't boot from the cd. It just keeps going to a black screen with "Error Loading Operating System". Can someone please help me. I know they can't get a new computer and I just want to get a new install on this one to speed it up for them. They had a ton of malware and such on it.

Any help greatly appreciated.
 

A:Compaq Presario won't reformat

Since HP now owns Compaq, I am not sure what kind of cds you have in order to attempt recovery.
Per HP Support




HP computers that ship with Microsoft Windows XP do not come with recovery CDs. Instead, they use a hidden space (partition) on the hard drive to store the recovery information. The use of a separate partition provides a convenient process that eliminates the use of recovery discs that may be lost or scratched. A system recovery from the hard drive may not be possible in some circumstances. Your computer may contain Recovery Disc Creation software. Recovery discs for Windows XP are available from HP for a minimal cost. See Obtaining Recovery Discs for ordering information.Click to expand...

What kind of disk are you using to attempt restore, and are you using HP's support page?
Are you still set to boot from CD and to attempt to do so FIRST?
Is your BIOS properly identifying your hard drive?
What happens if you unplug the data cable from the hd before trying to boot to cd?
Do you have the "Recovery Console" option at some point during boot?
 

4 more replies
Answer Match 56.7%

I replaced my LCD cable (with two different cables) from the the stock one because it wouldnt fully display if not pushed all the way back. When I replaced the cable I put it all back together and it comes on without the previous problem but now it displays 4 identical screens like. 1 23 4I have tried updating the drivers for the video chooser and have even loaded previous drivers but to no avail still 4 screens. Can anyone help me out?

More replies
Answer Match 56.7%

Related to the problem that I posted about here: http://www.techspot.com/vb/topic141683.html, this is a little more urgent. The Compaq will frequently, sometimes regularly lock up: screen freezes, neither mousepad nor keyboard respond, and the harddisk parks the heads. Lately, it locks up when it's on the charger, and then is fine (at least, so it seems) when on battery-power. It's also sensitive to being touched--not bumped, it's that unpredictable. Sometimes, I can move it around without problem, other times, if I even touch it, it freezes.

The fans still run like normal, so I don't think that it's overheating. I'm afraid it's a motherboard issue, which I wouldn't be surprised at, considering that it's about 6 years old.

Any suggestions would be much appreciated.
 

More replies
Answer Match 56.7%

Original 500GB HDD was showing signs of eminent failure.I successfully cloned the drive to a new 400GB HDD, using NORTON GHOST.(I know this drive is smaller than the original, but less than 30GB was being used on the original)Anyway, The new drive would not boot.Assuming that the problem may be OS license-related, I ordered the Compaq Recovery Discs Set.While waiting for the Recovery Disc Set to arrive, I purchased a Sandisk 120GB SSD.(Again, I know that the 120GB SSD is smaller than the original 500GB HDD that came with the computer, but I do not plan to even fill it 50%.)Anyway, The Recovery Disc Set arrived and I attemted to use it on the new Sandisk 120GB SSD.The process seemed to go fine, all 3 discs of the set seemed to copy, and then the computer restarts and a screen displaying files flying across the screen from one folder to another stays there forever.I waited 15 hours and came back and I still just see:Files flying across the screen, from one folder to another folder.The drive activity light is blinking, but obviously there is a problem. Some possible related facts/information:The SSD is detected in the BIOS.The SSD Checks good, by the BIOS Diagnostics "Smart" Tests.I cannot find anywhere in the BIOS to disable AHCI, it only shows SATA or IDE.Current Bios version is 5.5.5, and I have been unable to find a BIOS Update anywhere.Current Memory (RAM) is 4GB (2x2GB), which was an upgrade since the machine was originally purchased. Can someone p... Read more

A:Compaq Presario SSD Upgrade

Greetings, I use Paragon Professional Disk Imaging software. Try Macrium Reflect free. Disk cloning is also included in the free version. Cheers!

1 more replies
Answer Match 56.7%

Had to default my laptop now when it starts to load windows
says starting windows setup is preparing computor for first use
welcome message comes up then says windows could not complete installation,.to complete restart the installation
i press ok and goes over again starting windows
 

A:Compaq presario co61

What's the part/product number(P/N) on that Compaq Presario laptop?

You appear to have a CQ61 series model, so we need to confirm which one you have.
There should be a dash and additional characters after CQ61.

--------------------------------------------------------
 

2 more replies
Answer Match 56.7%

My parents bought a Compaq Presario laptop a few months ago and ever since we got it, it's been extremely slow. It's got Windows XP on it and after we click on whichever name we want to log on as, it literally can take up to about 7 minutes {if not longer} until it actually loads the desktop and everything. That's right, I kept track of time. Then, if we want to get on the internet {we have roadrunner} it takes even more time. I usually just sit there and watch a T.V. show while I wait for the home website to finally pop up.

I've tried a couple of things that I do to my own computer to make it faster, like going to msconfig and making sure the Startup List is unchecked. I also deleted those unnecessary things under IE-Tools-Internet Options like temporary internet files, cookies, history, etc. That makes my computer work better but when I try it on the laptop, it doesn't do a thing. It's still the exact same slow speed. I do have a Windows 2000 on my own computer and I've never worked with XP before so I don't know if there's a big difference there or what.

If anyone has had this problem or has any ideas on how to speed it up, that would be super!
Thank you!
 

A:very slow compaq presario

14 more replies
Answer Match 56.7%

Wont turn on at all no lights no nothing any ideas?
Thanks
Perry

A:Compaq presario c300

Compaq Presario C300 General Troubleshooting guide:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00372748&lc=en&cc=us&dlc=&product=3213867&rule=2144&lang=

3 more replies
Answer Match 56.7%

computer will not charge only when it wants to. will not start up the power charge and wireless lights come on and the hdd light does not. black screen and the fan does work. computer was shut down and charged over night the next day it would not start up and screen is black.

A:compaq presario cq60

Without the battery installed and the power adapter plugged in, press and hold down the power button for 10 seconds. Plug in the adapter leave the battery out, does the laptop power up?

Do you get any repeated beeps? Does any fans spin or can you hear any fans running?

2 more replies
Answer Match 56.7%

I bought this compaq presario 1800T from a garage sale and when I first turned it on it took at least 30min. for it to completely boot up and run fine. Cna some tell what to do for it to run faster. Also it has no memory chip and it runs on xp and was designed for ME or 2000.
Im also trying to get internet on it.
Please Help!
 

A:Need Help with compaq presario 1800T

how can it run with no memory? You will at least 1 gb of ram to run XP well. 512mb at the minimum to be acceptable.
Read the upgrading/troubleshooting ram guide in the guides forum before installing ram.

read the speeding up computers/system guide in the guides forum to see how to speed up your system. It is old, so bear in mind it really is only good for office work.

It has a built in telephone modem port and a LAN port for internet.
If you want to go WIFI (wireless) you need to buy a WIFI card for it.
 

1 more replies
Answer Match 56.7%

I have an older compaq presario 5000 (5wv260), i want to upgrade the memory in it. I know it takes sdram, 168 pin, but i dont know if i need parity or non-parity. OR ecc or non-ecc... anyone know what this computer takes?
thanks
 

A:compaq presario memory help..

6 more replies
Answer Match 56.7%

My Compaq M2000 Presario fan will not work. I have even bought a new fan and it still does not work. Is there a thermal switch on the motherboard that i could use to turn on the fan. Help is much apreciated.
 

A:Compaq M2000 Presario Fan Help

6 more replies
Answer Match 56.7%

My landlady's Compaq Presario SR1103WM is acting up and I'm pretty certain it is the PSU going out because the symptoms are the same as my PC had when it's PSU went belly up on me. It starts booting up fine until Windows XP Home starts loading, than it resets. I used a WinXP disk to repair the boot files and MBR with no effect, so we decided to reinstall Windows (been needing to do that anyway). Before doing that though, I was going to try recovering pictures of her grandkids by using a Linux Live CD, and ran into the same problem with it, so that eliminated Windows problems.

To the best of my knowledge, that leaves the PSU (likely) or the memory (possible) as the probable causes. I running Memtest86+ on it tonight to eliminate that cause.

Please correct me if I'm wrong in my diagnosis or if I am missing anything, but if I'm right about the PSU, that brings me to my main problem. I have heard that many Compaq models have proprietary PSUs so that you can't use off-the-shelf parts to replace them and have to buy one from them at a higher price. Is that the case with this model or can I order one from Newegg? I looked up the PC on Compaq's web site, and it didn't even say what PSU it has.

Thank you in advance.
 

A:Compaq Presario SR1103WM PSU

Memtest86+ has compleated 34 cycles with zero errors. Looks like it is the PSU.
 

1 more replies
Answer Match 56.7%

My aunt has a compaq presario desktop pc and for a couple of months she turns on the computer and it takes like a half hour to get to the desktop then it goes really slow.it goes a little faster when i shut off some programs but still not at full speed.it should run fast it has a intel celeron processor 2.66ghz,256 mb ram but it is rather slow.she didnt have any problems with it when she first got it about a year and a half ago.any help will be appreciated.

thank you
 

A:problems with compaq presario

9 more replies
Answer Match 56.7%

System simply freezes. Compaq Presario 5000, running XP. Latest Windows updates already applied. Any ideas???
 

A:Compaq Presario won't go into Standby

6 more replies
Answer Match 56.7%

A friend has a Presario X1300. It has a small problem. The power button only works once in a while (perhaps 1 in 20 presses). I thought perhaps it was a cold solder joint but even after touching up the button's pads its still has the problem.

It could be a bad switch, it looked like the switch had previously been replaced (although he hasn't had it serviced except to put in a new hard drive about a month before the switch went bad).

I found a post that indicated that someone found schematics for the motherboard and I was hoping that someone here would be able to point me in the right direction. I didn't find them on google. I'm going to replace the switch first, but if that doesn't work I have to assume there's some other problem that will need debugged.

I hate to see such a nice laptop go to waste because of a stupid power on problem.

I have found the service manual online. Its great, but has no schematics.

Thanks for any ideas you can offer.

Raydude
 

More replies