Tech Problem Aggregator

compaq presario won't come out of hibernation

Q: compaq presario won't come out of hibernation

I have a Compaq Presario 1200 laptop that won't come out of hibernation. With either the battery or A/C cable the power on light on the keyboard will come on after the power switch is pressed and a couple of seconds of clicks from the vicinity of the 3 1/2 floppy or the hard drive area but nothing else - no beeps or anything on the screen.
I talked to Tech support (I am out of warranty) and tried their suggestions - removing all power and pressing the power button and then reinserting the battery; turning it off, removing power for 24 hours and then turning it back on.
One suggestion I had from another source was to remove the CMOS battery but I can not figure out how to access that part of the case. I can get to the hard drive but not the battery.
Any suggestions or directions on removing the CMOS battery?

More replies
Answer Match 65.1%

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

1 more replies
Answer Match 65.1%

Hi, My Computer a Compaq Presario SR1810NX with Windows XP Home Edition SP2 is having an issue with it wont get past the Compaq Logo Screen, like, I press the power button the PC powers on, Fan Speeds up and then slows down as normal, keyboard lights flash as normal and the Compaq Logo along with the v3.48 and ESC = Boot Menu options appear on screen, the things is that it wont get past this screen, it just sits there at the Compaq screen, the keyboard and mouse dont seem to be interacting with the PC since I press ESC or F10 for boot mode or system recovery but the PC wont answer at all, I've already Disconnected power source unplugged mouse, keyboard all but PC is doing the same thing just sitting at the Compaq Logo Screen, the computer doesnt make any sound at all no beeps or anything, it wont let me access Windows at any time, recent installations well could be that I just installed a Mobile Bandwidth Card just a couple of weeks ago, and also just a few days ago I connected my iPod Shuffle 2nd Gen to the computer and the computer wont recognize it at all, not even charging, I know this might be a virus or malicious software, but my computer has barely connected to the internet in the last weeks (I couldn't pay the Internet and I had to use my friend's Mobile Bandwidth Card I mentioned before) all I did while in Internet with the Mobile Bandwidth was some schoolwork and youtube videos, I need help urgently with this since I have to deliver a very important proyect for scho... Read more

A:Compaq Presario SR1810NX Not Getting Past Compaq Logo Screen

Try a power drain.
1. Unplug power cord
2. Hold power button in for 60 seconds or more then let go
3. Plug in power cord
4. turn on the power and try to boot to setup (BIOS)

If it enters the BIOS then you should be able to just press F5 to reset to defaults and then F10 to save and exit. The PC should work now.

However, if after the power drain you still can not get in the BIOS than there is a MAJOR problem which would require some type of repair.

1 more replies
Answer Match 64.26%

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

14 more replies
Answer Match 57.12%

ok I hace a compaq that is all messed up. lets see one day the monitor would not work after a storm. Bought another, For a while the screen would be blue but change back to normal. The pc also would have a hard time starting up after it was in idle. We would do a hard start and for a while that worked. Now when I try to start it it turns on but the monitor says no vga/dvi input. There is also none of the preverable beeps that are supposed to be there so in short (well long)the motherboard is fried? So do I use it as a planter in the yard or is there a way to get it up and running. It runs on XP media center it has a micro ATX form factor motherboard it is also an AMD 64 Anthlon. ram is 256 mb 1Rx16 pc 4200 ddr2 533 mhz. With all that said can I just replace the motherboard and reinstall the reinstallation disks and be up and running? ( if it could only be so easy) What about the cpu. i know many questions here thanks for patients. Please help me. Tina
 

A:compaq presario

does your system have agp or pciex (or even pci) slot free? Is the graphics on board? It sounds like a graphics card problem, even if it is onboard. I'd try a replacement card (even if it's just a pci card) and see what happens...
 

1 more replies
Answer Match 57.12%

my compaq presario cq57 says system disabled 62359871..plz help. thank you











Solved!
View Solution.

A:compaq presario

@sharp66? Enter   73031277

3 more replies
Answer Match 57.12%

How do you open the casing on compaq presario 5304. I don't want to breakit.\

Thanks.
 

A:compaq presario

Link to tell you all about your computer. http://h10025.www1.hp.com/ewfrf/wc/...ry&tool=prodinfoCategory&dlc=en&product=93186
 

1 more replies
Answer Match 57.12%

I have purchased a Compaq Presario 600 with an Athlon XP 2200+ processor. I do not have a copy of Windows XP to wipe it with. Is there any way with the installed XP that I can refresh this system and remove data frome previous owners? Or Can I load Win 98?
 

A:Compaq Presario 600 ??

Compaqs usually have a hidden partition with all the factory loaded software on it in an image format. As long as it does and you can figure out how to access it you could probable do that - but you almost likely need the XP Product key and may need to reactivate XP after the recovery. XP can only be install on one machine at a time - so if they are still using it you are out of luck.

Watch the boot up for any recovery messages or take a trip to www.Compaq.com and look up the info for your make/model.
 

1 more replies
Answer Match 57.12%

I friend of mine purchased this Presario in 2004. She hasn't had internet since about 2006, so she hasn't had any of the updates since then. I brought her tower home with me since I have internet to load her updates. We're trying to get it internet ready. When I brought it home last week nothing would open. So yesterday she gave me the system recovery disc. I started with the Standard Recovery, but there were too many files that it couldn't recover. So I then decided to do a full recovery. After the full recovery it was rebooting and it told me that not all the system could reload and I couldn't hit okaybecause it wouldn't read / acknowledge my mouse. So, I unhooked her computer and rehooked mine to see what her alternatives were. I found a website, they wanted to know all the things it wouldn't oload. All I can remember is that it was things that could me downloaded later like: Norton, AOL, Adobe, MSN, and QuickTime.

So, I unhoked mine and rehooked her's up (and booted up my laptop). When her's came back up it's saying: NTLDR is missing Pres Control + Alt +Delete to Restart

My question for you is there anyway I can save her conputer? She doesn't have a lot of funds, being a singe mother of a 7 yr old and I'm just a good friend trying to help her out.

Thank you in advance for any help you can provide

A:Compaq Presario

I decided to see what happened when I ctrl alt delete and then decided to do another recovery. Here's some more info (could not recover errors):
1. C:\WINDOWS\Help\SB\Training\WXPPer\Content\Wave\[email protected]
2. C:\WINDOWS\System32\ntdll.dll
3. C:\WINDOWS\System32\ntkrnlpa.exe
4. C:\WINDOWS\32\dllcache\dinput8.dll
5. C:\Windows\systme32\dllcache\licdll.dll
6. C:\WINDOWS\system32\dllcache\locator.exe
7. C:\WINDOWS\system32\viaservc.dll
9. (Black screen instead of error message)
9. C:\WINDOWS\Installe152ec/msi
10. C:\WINDOWS\Installer\1b2cc.msi

then all of after about 20% a big blue screen with following:
A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. IF this screen appears again, follow these steps:

Check to make sure new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup... Read more

3 more replies
Answer Match 57.12%

Hi. Does anyone know if a Compaq Presario SR1150NX does the display system support component video (Y, Pr, Pb) signal output function? Thanks
 

More replies
Answer Match 57.12%

ok when i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do. Thanks
 

A:Compaq presario help

16 more replies
Answer Match 57.12%

How do you access the Bios on a Compac Presario 4110. I keep getting the message 162 Sytems Options not set. 163 Time and Date not set. Having visited Compac they were not a lot of help. Downloading the software recommeded by them was a waste of time, still got the above message. Tried all the usual keystrokes etc no good. Any suggestions would be appreciated.
 

A:Compaq Presario

9 more replies
Answer Match 57.12%

I have a compaq presario. I have 2Gig memory. I changed services from ATT to comcast internet. now my pc needs to be wiped clean and set up again but when I got the computer I did not get the discs. how can I do this without discs> it wont open up the internet even though I am connected.

Please help
 

A:compaq presario pc

8 more replies
Answer Match 57.12%

sir, can u help me, i can't fint my driver for compaq presario v3760TU
previously, i used vista home basic but i convert to window seven.. but i can't find my driver in hp/compaq driver web.. plzz help me..
-sory for my english so bad..

A:compaq presario

Were you at this Hp/Compaq download page ?


Software & Driver Downloads Compaq Presario V3760TU Notebook PC - HP Customer Care (United States - English)&

6 more replies
Answer Match 56.7%

My brother recently bought a new HP desktop PC so he wants to sell his old laptop (Compaq Presario 700, Windows XP Home Edition) and we both agreed we should do a full restore to completely wipe the hard drive clean to it's original slate and we have the original Compaq ''QuickRestore'' discs and for whatever reason, they're not working. There is three CD's and not a single scratch or mark on any of them. I've tried to run all three on the laptop and the only thing that happens is that the folder containing the discs files on it is what pops up and no actual setup occurs like it says on the little piece of paper that comes with the CD's.

This is what it says....

First, if your Presario Notebook is attached to a Port Replicator (QuikDock), you must turn the power to the computer off, disconnect it from the QuikDock, and plug it into an external power socket. Disconnect any printer cables or other peripherals from the computer before using Quick Restore.
1. Insert the Quick Restore CD (bootable disk) in the CD drive, and press Enter. A WARNING message appears advising that you are attempting to totally reformat your hard drive. Confirm by following the next step.
2. Press 1 and then Enter to continue. The Power Quest Quick Restore Wizard starts copying and uncompressing data to the local hard drive. This process takes approximately 7-10 minutes.

This warning message never appears and none of this ever happens. Does anyone know why... Read more

A:Compaq Presario 700 (Windows XP)

Is there an autorun.exe? Setup.exe? Any executable at all on the root of the disk?
 

1 more replies
Answer Match 56.7%

i have a question...a while ago my Presario battery died -- it wouldn't charge or discharge, the laptop could only work on the AC, but the indicator showed the correct % of the charge... I bought a new battery and it worked fine for a week, but I decided to reinstall Windows XP, and from then on, it's been a rollercoaster ride for me (( First, it worked fine, but the laptop started to freeze every 20 minutes. I followed the COmpaq's people advice and updated BIOS for some battery controller thing and updated the video driver. From then on, the problems with my new battery just started to overwhelm me First, the battery wouldn't charge when the laptop was ON. Then somehow it did charge. I decided to calibrate it, and now it doesnt want to charge -- on or off. The red light indicating the battery is flashing -- as it's not charging, and the indicator says "0" % of course.
Does anyone have any ideas?? Please? This only started after I reinstalled the Windows, so I am sure it's not hardware or the battery, everything worked just fine ((
Please help me!!!! Thanks... I'm desperate....
 

A:Compaq Presario 700 and battery

6 more replies
Answer Match 56.7%

Original 500GB HDD was showing signs of eminent failure.I successfully cloned the drive to a new 400GB HDD, using NORTON GHOST.(I know this drive is smaller than the original, but less than 30GB was being used on the original)Anyway, The new drive would not boot.Assuming that the problem may be OS license-related, I ordered the Compaq Recovery Discs Set.While waiting for the Recovery Disc Set to arrive, I purchased a Sandisk 120GB SSD.(Again, I know that the 120GB SSD is smaller than the original 500GB HDD that came with the computer, but I do not plan to even fill it 50%.)Anyway, The Recovery Disc Set arrived and I attemted to use it on the new Sandisk 120GB SSD.The process seemed to go fine, all 3 discs of the set seemed to copy, and then the computer restarts and a screen displaying files flying across the screen from one folder to another stays there forever.I waited 15 hours and came back and I still just see:Files flying across the screen, from one folder to another folder.The drive activity light is blinking, but obviously there is a problem. Some possible related facts/information:The SSD is detected in the BIOS.The SSD Checks good, by the BIOS Diagnostics "Smart" Tests.I cannot find anywhere in the BIOS to disable AHCI, it only shows SATA or IDE.Current Bios version is 5.5.5, and I have been unable to find a BIOS Update anywhere.Current Memory (RAM) is 4GB (2x2GB), which was an upgrade since the machine was originally purchased. Can someone p... Read more

A:Compaq Presario SSD Upgrade

Greetings, I use Paragon Professional Disk Imaging software. Try Macrium Reflect free. Disk cloning is also included in the free version. Cheers!

1 more replies
Answer Match 56.7%

Hello. A buddy of mine has an old Compaq Presario 7470 that he is putting a new mobo in. Apparently, the old case has color-coded front panel wires. He has separated the wires and now he does not know which ones go where (in terms of going to reset button, power button, Etc). We have looked everywhere on the net for some sort of schematic for the Compaq case to figure out the color-coded wires. However, not even Compaq site has any info. Also, to note, the wires apparently terminate on some sort of small printed board before going to the lights and buttons. If anyone has any ideas I would appreciate your help.

Thank you,
LS
 

A:Compaq Presario 7470

The front panel wireing is one problem with trying to put a non Compaq board in a Compaq case . . the power supply may be another . . a lot of the OEM's use a proprietary Power supply with non standard connectors.

You might be able to Google Compaq Front Panel connectors to see if someone has worked it out ( i know of one guy who did for Dell )

He will almost certainly be better off buying a new case for the new board, and using whatever hardware he can with the new system.
 

3 more replies
Answer Match 56.7%

Have a Compaq Presario 1020 - laptop. Info is as follows -
Series 2900A
Model FBV1433VQL1J
Serial V644HZD50299

Need a maintenance manual. Any help would be appreciated. Thank you.
 

A:Compaq Presario LAPTOP

Google Compaq for a contact number - ask them to send you a manual..
 

1 more replies
Answer Match 56.7%

A mate of mine has just bought himself a Compaq Presario and asked me to give him a hand at getting it up & running so I said I would, (really a classic case of the blind leading the blind). We did get the thing going & connected to ISP so miracles do happen. What I would like to know more about is the partitioned HD that it has. Am I right in thinking it is a backup of some sort.
 

A:Compaq Presario HD Partition

8 more replies
Answer Match 56.7%

Hi this is my first post so bare with me.

I have a compaq presario 2580us laptop first of all with a pentium 4 in it.

My question is this. My laptop has 3 fans in it and they all used to come on in the past. Only one(the biggest) has been working not sure how long it has just been the one either. My temps get up to around 127F. I am just just wondering if there is a way to check out why the other 2 fans are not working. If there is some setting that I could check that would be great. Any assistance would be so nice.

Thank you,

Jackie
 

A:Compaq Presario Fans

I did this on a machine at work 2 weeks ago. Check hp.com, do the auto detect thing, and update the bios. should solve the problem.

hope it helps.
 

9 more replies
Answer Match 56.7%

i have a compaq presario 3630AS desktop. It came with quick restore CDs and a recovery CD. If i have to re-install win xp should i use quick restore CD or the other ????? Pls help

A:compaq presario 3630AS

Compaq Recovery CD options
The Compaq Recovery CD enables you to restore your system files from a separate partition on your hard drive. The four options on the Recovery CD are listed below.

Restore option Description
Emergency Diskette Creating this diskette is important as it allows you to save your computer's unique setup information for use in the event of an emergency. Store the diskette in a safe place.

User Backup Backs up all information and files on your hard drive and stores them in a separate partition on your drive.
User Restore Restores your hard drive to the state it was in when you last used User Backup.

Factory Restore Restores your computer to its original factory-installed software state.

1 more replies
Answer Match 56.7%

Had to default my laptop now when it starts to load windows
says starting windows setup is preparing computor for first use
welcome message comes up then says windows could not complete installation,.to complete restart the installation
i press ok and goes over again starting windows
 

A:Compaq presario co61

What's the part/product number(P/N) on that Compaq Presario laptop?

You appear to have a CQ61 series model, so we need to confirm which one you have.
There should be a dash and additional characters after CQ61.

--------------------------------------------------------
 

2 more replies
Answer Match 56.7%

My Father in Law has a Compaq Presario 5900T. His Hard drive crashed and I put a new 160G drive in it. When I try to restore the computer with the original Compaq restoration CD's it keeps rebooting without ever formatting, partitioning or anything else.

Can someone help? My FIL is bound and determined to continue using this machine. I believe he is afraid of change.
 

A:Compaq Presario Restore?

you need the old hard drive

the quick restore disks that come with compaq computers only work with certainpartition and hard drive sizes
to get the 160 gb hard drive to work, you will have to reformat the old hard drive and install everything on it

then copy the drive c partition over to the 160gb hard drive then use a partition program to increase the drive c to 160 gb
 

1 more replies
Answer Match 56.7%

does anyone have or know where i can find the dip switch settings for a compaq presario 1930 laptop?
 

More replies
Answer Match 56.7%

I have a PIII 733mhz Compaq Presario 5900T that I need some help with.

1st thing is that my harddrive is broken and I am looking into getting a replacement for that, but my question is:

What kind of disks does this computer support?
I tried a 160gb samsung disk, but it hangs at compaq logo screen so I guess it's too big. (hoping to be able to change this through a bios update later)

2nd part is that when I found a matching disk, how will I restore bios on it? I have no restore cds left...and I suppose this computer stores a part of its bios on a hidden partition like all other compaqs.

The 384mb ram limit is fine with me since I am gonna run Linspire linux on it.

Anyone that can help? I tried Compaq support and got no help whatsoever.
 

More replies
Answer Match 56.7%

Hey fellas, Im currently trying to install XP on this box. Problem being, is im having a hard time getting the drivers for the mobo and such. I dont have the cd's and such for them either. The os in on there just fine and the network card and such work dandy, but i cant seem to get the USB ports enabled. I checked in the bios and i cant locate anything and im starting to worry.

Anyone got any help for me!
 

A:Compaq Presario 5600S

More specifically im looking for VIA vt82C598AT chipset drivers.
 

1 more replies
Answer Match 56.7%

Its a presario 5000, i ran the belarc advisor tool to see what kind of memory i have, it said i have PC133, so i ordered some more, well, for the heck of it, i removed the memory in it to clean the board and the sticker on the factory memory says PC100!! so will PC133 memory still work with this thing even though it has PC100 in it now?
thanks!
 

A:compaq presario memory help..

7 more replies
Answer Match 56.7%

My laptop wants an administrator password that I don't know. Shows a system disabled code of 91550023. What do I do?

More replies
Answer Match 56.7%

I hit the power button this morning and nothing happened. Tried unplugging and holding power button in and still nothing.
 

A:compaq presario will not turn on

Please post your system specs, exact model Presario, include any upgrades or modifications please.
 

1 more replies
Answer Match 56.7%

Hello,
I have recently upgrade my OS from Vista to Windows 7 Ultimate by clean install method.
I think so far everything works except microphone which I solved by installing updates from windows update.
So my question is, Should I install some drivers or some updates from either compaq or hp sites or wherever also? Should I try to find drivers specefic for my computer or go with the drivers which came with windows 7?
My computer model is: Compaq Presario CQ61

Thank you very much!!!

A:Compaq Presario cq61

  
Quote: Originally Posted by jav


Hello,
I have recently upgrade my OS from Vista to Windows 7 Ultimate by clean install method.
I think so far everything works except microphone which I solved by installing updates from windows update.
So my question is, Should I install some drivers or some updates from either compaq or hp sites or wherever also? Should I try to find drivers specefic for my computer or go with the drivers which came with windows 7?
My computer model is: Compaq Presario CQ61

Thank you very much!!!



If HP/Compaq have the drivers for your PC, then yes.

4 more replies
Answer Match 56.7%

my mother bought a compaq presario 5304 from a family member.when she got it,there was no system recovery disk for it.there was a disk that was for the 700's series.her computer will not detect the right drive because they used the wrong recovery disk for it.how do we get the computer to recognize and install its original drive.it was 56k.i am pretty much computer illiterate.john
[email protected]
 

A:compaq presario 5304

hmm system recovery. I'm not too big on using that. My overall suggestion would be go into dos at the startup and do a simpe C:/ format or is it the other way doh... Anyways at startup of windows press oh F8 I believe for systems with win 98 or higher but if you got win95 its either f5 or f8 or you can make a boot disk and do it that way.
 

1 more replies
Answer Match 56.7%

Hello;

I have had a Compaq Presario 1500 laptop for about 2 years now, and I am quite un-satisfied when it comes to multi-tasking several applications at the same time. Sometimes it is so slow that I cannot minimize a full-screen application to read up on something on the net. I currently only have 256 megs of ram, but I read on the internet that tihs model could have up to 1 gigabyte. This is great, but therein lies my question. The laptop has two ram slots, one of which has been empty since i got the computer. Could I get a gig of ram and still keep the 256y meg stick as an added boost? or is the 1 gig the maximum for both slots?
 

A:Compaq Presario RAM upgrade

Well if your laptop supports a maximum of 1gb then that means 512mb per RAM slot.
Here are a few links on Newegg which is the Maximum Memory you could get for your Laptop. This is if you are in USA
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145482
http://www.newegg.com/Product/Product.aspx?Item=N82E16820134037
http://www.newegg.com/Product/Product.aspx?Item=N82E16820172102
 

8 more replies
Answer Match 56.7%

Hi gang!
well it been awhile since i been here but at least i remembered where to go ..

Anyway here is my problem that I am stumped with ....

Reformated a compaq presario 2.1 gig/128ram/40gighd/ with onboard video and sound.
Everything is up and running fine except i cant seem to get the sound to work, says that it is installed and working properly but still doesnt work.
Installed different speakers ..no joy....went to compaq downloaded new software drivers and installed...no joy. Any ideas?

Thanks in advance
 

A:compaq presario no sound

I almost hate to ask if the volume control is set to mute so we'll pass on that one.

If there's a headset socket on the front of one of the CD's, can you hear anything through that?
 

2 more replies
Answer Match 56.7%
Answer Match 56.7%

I have a compaq presario 1650 laptop. It currently has a different language version of W98 installed. I want to format and reinstall the english version. The person I got the laptop from no longer has the compaq installation disk. Is it possible to format the harddrive and reinstall with the drivers that are located on compaq's site?
 

A:help with compaq presario 1650

As long as all the drivers are there, sure.

I've redone plenty of laptop machines. Just make sure the site has drivers for all the parts first, and get them all downloaded before you start.

------------------
Get free stuff and help out a poor computer tech:
LarryCore begs for money
 

1 more replies
Answer Match 56.7%

computer will not charge only when it wants to. will not start up the power charge and wireless lights come on and the hdd light does not. black screen and the fan does work. computer was shut down and charged over night the next day it would not start up and screen is black.

A:compaq presario cq60

Without the battery installed and the power adapter plugged in, press and hold down the power button for 10 seconds. Plug in the adapter leave the battery out, does the laptop power up?

Do you get any repeated beeps? Does any fans spin or can you hear any fans running?

2 more replies
Answer Match 56.7%

I need to replace HD in my Compaq but I can't seem to get the plastic cover off front without forcing it. I am afraid I will break it. Any suggestions?
Thanks for your time.
Jerry L.
 

A:COMPAQ PRESARIO COVER

Well you didn't say it so I will ask. Are you sure the front cover has to come off. Most cases you just remove the screws on the back, remove the back metal shroud, and access the machine from there. A few cases have the front covers come off but the majority don't.
 

1 more replies
Answer Match 56.7%

Hello,

I have a Compaq Presario 1247 Notebook (laptop) with Windows 98 Second Edition with a 4.3 Gigabyte hard drive that was logically partitioned into 2 drives (C: and D: ). Earlier this year I used my CD Burner to copy all of the Quick Restore files from the D: Drive to a blank CD-ROM (CD-RW) disk and then removed the partition from the hard drive with a program from the Compaq Website. My CD-Burner is connected to my Notebook via a PCMCIA USB 2.0 Card, it has 2 USB Ports on it, one port is being used by my CD-Burner the other port is not being used.

Last Friday (09-24-2004) my Notebook caught a virus while I was on the internet and it was corrupted. MS Windows Explorer error message came up when I tried to look at my hard drive. The error message also came up when I rebooted, therefore no desktop icons appeared. So I reformatted the hard drive C: and put the Quick Recovery CD-ROM Disk in the internal CD-ROM drive. However, the Quick Recovery Disk displayed a message that it could not find the Quick Restore files and to contact Compaq Customer Support. I reformatted my hard drive again this time with the /quick format switch and /make system disk switch and then copied all the files and subdirectories from the Quick Recovery CD to my hard drive. Now before I even tried to run FDISK to repartition my hard drive into 2 logical drives I thought I would put the CD (CD-RW) containing all of the Quick Restore files and subdirectories that I burned earlier this year (before I r... Read more

A:Compaq Presario 1247 - Need Help

have you tried the ultimate boot CD:

http://www.ultimatebootcd.com/

It containes many utilities that might help.

it is bootable so it should load

Steve L
 

2 more replies
Answer Match 56.7%

hello recently my pc has been failing to start up and asking to go to the start up repair my pc is fine but will this lead to future problems

thanks ~shadow

A:compaq presario cq60 help

Hi and Welcome to TSF!

What did startup repair find?

Do you have your Windows cd?

2 more replies
Answer Match 56.7%

I really don't know that much about computer but i have a compaq presario v6000 and i just brought a new hard disk drive ST9100824AS and i trying to put on windows 7 and its saying no IDE found when i run diagnosis test. When i go to run the windows 7 disk i get to the installing screen and its doesn't find hdd. I need some help. Thanks

-MaxG

More replies
Answer Match 56.7%

Hi, i'm having a problem turning on my laptop. I'm using a Compaq Presario C502US. I've been using the AC adapter that came with the laptop but eventually the AC adapter became loose and broke. The charging icon (lightning symbol) wouldn't turn on anymore and I think the laptop has now run out of power. I've finally received a new adapter and when i plug it in the charging icon lights up. However the laptop still won't turn on. I've waited for about 2 hours but it still won't turn on. When i click the power button, the Power turns on and then it blinks. The Fan turns on for about 3 seconds but then it goes off and the power light blinks and the monitor won't turn on. Can anyone help me with this problem?
 

A:Compaq Presario won't turn on

Remove battery and power adaptor (ie all power out)

Hold down the ON button (to disperse all internal power)
Plug the power adaptor back in only (and to wall socket!)
Turn on!

If it works, turn back off, and re-install battery, turn On
 

5 more replies
Answer Match 56.7%

hi,

Iam siva.I need all the drivers of compaq presario c770us because some of the drivers are not functioning properly it has become a serious problem for me for many days.I will be vey grateful if you suggest me a positive reply.Thank you.
 

A:compaq presario drivers

10 more replies
Answer Match 56.7%

I need to completely reformat my compaq presario but have no idea how to format it since it is using vista. help help me do it step by step. thank you.

reen

A:Compaq Presario Vista

1. turn on computer and tap on F11 repeatedly until the Compaq screen disappears
2. click Advanced Options
3. select system recovery (may say restore the computer to factory settings)
and click recover without backing up files, click next

It will do the rest on its own.

Do this with ONLY mouse, keyboard, monitor and power attached. If you added any parts inside other than ram you will need to remove them to ensure it works properly.

Thats all!

2 more replies
Answer Match 56.7%

Hey everyone I am having the same problem again as I was having before with my Compaq Presario 5000. It seems to just freeze up when I am on it or not. Sometimes I try to move the mouse to get back into Windows from the screen saver and it does nothing. At all! And sometimes in the middle of surfing the web and listening to music it just freezes up again and I have to hit the power button just to get it back up and running. Can anyone help out with this? I was asked to run MemTest before but I have no idea how to do this, so could someone help out? Also, since I am not a complete newbie, but darn close when it comes to the whole hardware side of computing, how can I tell what is causing interference with what when it comes to the hardware I am running and wether or not the latest drivers are installed? Thanks again and hope to get this resolved quickly.

Compaq Presario 5000
UWAVE Motherboard
832MB RAM
AMD Athlon 901Mhz
eVga GeForce2 mx 400 64MB PCI
Sound Blaster Audigy 2 ZS Platinum
Sony DRU-530 DVD +-Drive
Windows XP Home SP1
 

A:Compaq Presario Freezing up again!

13 more replies
Answer Match 56.7%

My old compact Presario 2100 won't boot up. It is using windows xp. I can't get it to boot up even in safe mode

A:How do I get my Compaq Presario lap top to boot

Is there an error message displayed before the computer restarts?If the message flashes too quickly to read, press F8 and select "Disable automatic restart on system failure"Disable automatic restart on system failure

3 more replies
Answer Match 56.7%

Hi Guys,

I Have a Compaq Presario SR1000 and I ended up getting a virus on the machine. Now I cant boot in to windows or safemode, but I know the harddrive is partitioned.

I dont have the manual or boot disks for the computer anymore, does anyone know the command for these machines to access the partion?

any help would be appreciated.

Thanks
 

A:Solved: Compaq Presario

The manual doesn't say .. But I'd try the F10 key at Bootup.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&lang=en&product=407663&

You can also Email HP support and see if they know ...
... and If you can still get the recovery CDs ..
[email protected]

Does this computer have a sticker on the side .. or somewhere ....
That tells the M$ product code for the operating system installed ???
 

2 more replies
Answer Match 56.7%

Installed with Vista Premium, i've realised that it has a Recovery Partition and im not sure how to use it. my computer came with a windows vista disc, but im trying to recover Vista and im not sure how to do it. maybe someone can give me a heads up on how to do it.
 

More replies
Answer Match 56.7%

got a mates comp to try to fix(presario sr1055cl)
when it starts up it defaults to a start windows normally black screen with three commands above like start in safe mode etc

if left it keeps rebooting to this page
if i press enter it goes to compaq sign and looks like it gonna work but then goes back to same screen

i can get into the bios and can do a system recovery but it just puts me to a plain light blue screen and nothing happens

please help
 

A:compaq presario won't start

7 more replies
Answer Match 56.7%

Is this computer any good if used for a bit of gaming, internet, work, CAD software? It is $700Cdn and include monitor, printer and speakers.
Also is it true that this computer with not come with discs of the software included, all the software is on the HD.

Processor
Intel ® Celeron ® D Processor 340
Operating System
Microsoft ® Windows ® XP Home Edition
Memory
512MB PC2700 DDR SDRAM memory (expandable to 2GB)
Hard Drive
80GB 7200 rpm Ultra DMA hard drive
Multimedia Drive
CD-RW 48x32x48x
DVD-ROM
DVD-ROM drive 16x max. speed with InterVideo WinDVD SE software
Video Graphics
Integrated Intel Extreme Graphics with up to 64MB shared video memory
Network Card
Integrated 10/100Base-T network interface
Sound
Integrated audio
Fax/Modem
High-speed 56K modem
Included Peripherals
Compaq keyboard
Compaq scroller mouse
Software
Digital entertainment
Apple iTunes for Windows: Digital music jukebox for importing music, organizing your collection and more
InterVideo WinDVD SE player: Play DVD movies
Sonic RecordNow: Burn music CDs and archive your data to CDs
RealPlayer: Find, play and organize digital programming - music, sports, entertainment, news and more more
Adobe Photoshop Album Starter Edition
WildTangent GameChannel: Preview 10 computer games

Productivity software
Microsoft ® Works 7.0: Includes a word processor, spreadsheet, database and calendar
Microsoft ® Office 2003 Trial: Get a 60-day trial version of Microsoft ® Office Student and Teacher Ed... Read more

A:Compaq Presario SR1220NX

I got mine on Oct 26,2004. So far i am very pleased with it. Not into gaming so I can't answer that question. I got $300 US rebates off the price.which brought the cost down .
Yes the software comes on the HD. There is a 'System Recovery " disk that comes with it but I'm not sure exactlly what that has on it..It does restore the orginal files that were on the computer when it came from the factory so it seems that should be all that is necessary to keep the computer running incase of problems.
 

1 more replies
Answer Match 56.7%

We have an old 2001 compaq 5020 computer. The last screen you see when you shut it down is , it is now safe to turn off your computer and then you have to shut it down manually. How can we change this to turn off automatically. We are running Windows XP.
Thanks
Bilmac

A:Compaq Presario 5020

Hello bilmac1. Probably, when Windows was installed, it failed to recongize the BIOS as ACPI compatible. Or simply, APM is not enabled: check under "Power Options Properties" if the tab "APM" exists; if so, check the option "Enable Advanced Power Management Support" (if it's checked, uncheck it, weird as it sounds).

1 more replies
Answer Match 56.7%

I have a Compaq Presario 2700T with problems. When I press the start switch it runs for about five seconds and then shuts off. It doesn't even run long enough to give me any screen image. It does this on every attempt to start the computer now. Prior to that it flashed a blue screen on a previous start attempt but not long enough to read what it said.
Any ideas what is going on?
 

A:Compaq Presario 2700T

Does this happen when the power connector is attached?

Are there any lights on when the power connector is attached? For example, does the battery charge?

Do not be rough with the cable, but the power plug that connects to the laptop, does it make any difference if you gently bend the cable around or move the connector in the socket? (Occasionally over time either the cable becomes damaged or the socket becomes loose)
 

2 more replies
Answer Match 56.7%

ok the dilemma is simple ok i bought this new laptop for the wife then it came with a built in webcam truth is i don't want that webcam so i bought another webcam that i am trying to use on msn but the laptop states found new hardware but doesn't install my webcam is usb ported it says m style on the cam the only thing it uses my wife states that she can access the cam thru the control panel but not in msn why is this occuring if someone could get to me asap would be greatly appreciated thanks in advance
 

A:Ok new laptop compaq presario

You may need to disable the original webcam

You can disable it by going to: Device Manager (Start->Run-> Devmgmt.msc)

Then locating your Webcam (that you don't want to use) and then right click on it and select disable

Then go back to MSN and use the settings to set up the new webcam
 

1 more replies
Answer Match 56.7%

I was wondering how people thought of the Compaq Presario laptops as i am thinking of purchasing
 

More replies
Answer Match 56.7%

Please i desperately need help, have got compaq presario 3015us(never buy it) P4/512ram/60 gb h.disk etc etc.... the problem started when i woulds scan norton antivirus, the system would juz freeze, tried it a lotta of times but same prob, then i started gettin error msgs sayin ISAAC.DLL error...then RUNTIME.DLL error.. then i wanted to restore it to a previous date, but there the calender would be stuck at oct and i wanted to restore it to september...

then i tried using the compaq recovery disk, the disk after 2 mins of running, would shut down the computer again, same thing happenned 3-4 times and next time gave some error sayin cant access drive H (dont have drive H) and enter but nothing happenned.... then i got my hard disk formatted but now ot shows "NO DISK SPACE" whereas i have 60gb and same problem of shutting down keeps happenning when the disk runs...pls help....

is it a prob with the motherboard or hard disk or juz something else....pls pls help!!!!
 

A:COMPAQ PRESARIO 3015us(HELP!!!!!!)

hmmm, when you formatted the hard drive, did you FDisk it prior? When I worked for Gateway tech support, we had a little saying, "if nothing else, then FFR"... which meant FDisk, Format, THEN reinstall OS, in that order. Give that a shot with a windows ME bootdisk. You can find the download at bootdisk.com
 

1 more replies
Answer Match 56.7%

Not sure if anyone can help here but worth a try.
I brought a new compaq presario desktop pc just before xmas. I got sick of all thier crap on it so I re-installed with another copy of windows xp prof sp2. Now I am having problems and want to go back to the original installation on the compaq.
Didn't do any restore disks as no-one explained this to me then. The install partition is still on the compaq but when I load up comp and try to press F10 to do it, it doesn't work (just keeps loading into windows). I can not figure out how to get the reinstall to start and am not sure how to do it manually. My brother has tried to manually start it in windows but it doesn't like this. Have tried changing the boot drive using the Esc and F1 keys as per start up options but it has the drive as grouped and can not specify H drive (where compaq restore is).
Any suggestions welcomed before I have to find more money to buy disk!
My brother has suggested that maybe we can delete the c drive partition therefore forcing the h drive to run, but want to leave this as a last result in case it doesn't work.
Thanks to anyone who reads this.
Ange

A:Need Help With Restore Of Compaq Presario

Ok Frad, if you want to restore the system to the way it was when you purchased it, the best way is to place the restore cd in your drive and restart. when the option comes up press what ever key you ned to to enter setup. scroll through the setup untill you can change the boot options. place the cd drive as your 1st boot option. when you have done that, save and exit setup. when the system reboots, you will be given the option to restore. READ THE WARNINGS CAREFULLY, THIS WILL FORMAT THE HARDRIVE AND ERASE ALL THE DATA THAT YOU HAVE. I recomend that you burn a copy of all your important files prior to doing this and good luck.

Printboy67

4 more replies
Answer Match 56.7%

We have a very old Presario 4550, connected to an old cathode tube display and we also can't find a functional printer with old fashioned connectors. There are two USB ports on the back of the tower - could we connect a more modern display and printer to this tower using the USB ports?

More replies
Answer Match 56.7%

Hello:
I'm making some changes to a compaq presario 4660 (dinosaur) and it's running windows 98. I cannot get into bios. F2, F1, delete and Tab do not get me in. I searched on google and really didn't receive good results. Well it did say that F2 would get me in, but it does not. Seemed to me there was another way to get into bios?
 

A:compaq presario 4660

16 more replies
Answer Match 56.7%

I have a compaq presario 7470 in my possession. It used to work, but not for some reason it refuses to. I just bought a power supply for it and it still doesnt work. I figured out that if u remove the J3 pin from pins 2 and 3 after pressing the power button it will turn on. The compaq screen comes up and it says '102-System Board Failure.' This seems bad...what should i do? is it a fried motherboard? if the board was fried would it even turn on?? Thanks!
 

A:Compaq Presario 7470

I don't think the motherboard is fried in which case it wouldn't boot, as you say. But it definitly is having some problems...

Has Compaq support service gotten back with you yet ?
 

11 more replies
Answer Match 56.7%

My landlady's Compaq Presario SR1103WM is acting up and I'm pretty certain it is the PSU going out because the symptoms are the same as my PC had when it's PSU went belly up on me. It starts booting up fine until Windows XP Home starts loading, than it resets. I used a WinXP disk to repair the boot files and MBR with no effect, so we decided to reinstall Windows (been needing to do that anyway). Before doing that though, I was going to try recovering pictures of her grandkids by using a Linux Live CD, and ran into the same problem with it, so that eliminated Windows problems.

To the best of my knowledge, that leaves the PSU (likely) or the memory (possible) as the probable causes. I running Memtest86+ on it tonight to eliminate that cause.

Please correct me if I'm wrong in my diagnosis or if I am missing anything, but if I'm right about the PSU, that brings me to my main problem. I have heard that many Compaq models have proprietary PSUs so that you can't use off-the-shelf parts to replace them and have to buy one from them at a higher price. Is that the case with this model or can I order one from Newegg? I looked up the PC on Compaq's web site, and it didn't even say what PSU it has.

Thank you in advance.
 

A:Compaq Presario SR1103WM PSU

Memtest86+ has compleated 34 cycles with zero errors. Looks like it is the PSU.
 

1 more replies
Answer Match 56.7%

Hey all,
Does anybody know if all of the motherboards in the Presario V6000 laptop series are the same size and shape?

More specifically, does anybody know if a V6000 motherboard would fit in a V6310 case?

If you need more info, let me know.

Thanks!
 

More replies
Answer Match 56.7%

My Compaq M2000 Presario fan will not work. I have even bought a new fan and it still does not work. Is there a thermal switch on the motherboard that i could use to turn on the fan. Help is much apreciated.
 

A:Compaq M2000 Presario Fan Help

6 more replies
Answer Match 56.7%

I just bought and set up a new computer system, and am now trying to get my old one to boot, so that I can migrate the files needed for the new system. The monitor doesn't come on, and all I'm getting is a fast blinking green light on the tower. I've un/replugged all cables and power cords, and I know the monitor is OK because it belongs to my husband's matching computer, but my old one won't boot.

Help!!!
 

A:Compaq Presario won't boot!

I'm desperate, guys! Is there any other information I can give you to help resolve my problem? I have the Easy Transfer Cable for Vista all ready to go (and the software loaded in the old computer before I disconnected it and moved it to the card table), but I can't get my Compaq to boot.

If you can't help me, I guess I'll take it to Best Buy tomorrow and let the Geek Squad have at it...
 

3 more replies
Answer Match 56.7%

i have recently formatted my hard drive and reinstalled xp home, i have found all the necessary drivers etc but unable to use my mouse, on the device manager a yellow icon appears stating unknown device, iv searched everywhere for drivers etc but all came blank, i went to the compaq site and downloaded the mouse/keyboard driver from there but then got an error stating unable to find version of runtime to run this application '' iv downloaded the most recent .NET framework and still nothing, iv searched for more help but unable to find any results, anyone got any pointers if im doing something wrong ?

A:compaq presario S5600UK

What is the make and model # of your mouse?
In Device Manager, right click the Unknown Device and Uninstall it. Now remove the USB cable for the mouse from the computer end. And restart the computer. When the computer comes back up, plug in the mouse into the Back USB port of the computer and not the front or through a hub as these ports are weaker. It should install. if not, go to the mouse manufacturers support download drivers site and type in your model # and download the driver.

1 more replies
Answer Match 56.7%

Hi, how do you restore to factory settings a (COMPAQ PRESARIO SRI617CL)?

A:(COMPAQ PRESARIO SRI617CL)

If this computer has a Recovery Partition, when you boot the computer on the logo screen you should see a message Press F2 for setup and Press X for Recovery (X being F11 or whatever key it says) If you don't get that message, then this computer does not have a Recovery Partition (if you can still boot the computer you can look in Disk Management to see if there is a drive called Recovery)
Other then that you will need the recovery discs you made when you got the computer. How to Run Compaq Recovery Disk | eHow.com

1 more replies
Answer Match 56.7%

Wont turn on at all no lights no nothing any ideas?
Thanks
Perry

A:Compaq presario c300

Compaq Presario C300 General Troubleshooting guide:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00372748&lc=en&cc=us&dlc=&product=3213867&rule=2144&lang=

3 more replies
Answer Match 56.7%

My parents bought a Compaq Presario laptop a few months ago and ever since we got it, it's been extremely slow. It's got Windows XP on it and after we click on whichever name we want to log on as, it literally can take up to about 7 minutes {if not longer} until it actually loads the desktop and everything. That's right, I kept track of time. Then, if we want to get on the internet {we have roadrunner} it takes even more time. I usually just sit there and watch a T.V. show while I wait for the home website to finally pop up.

I've tried a couple of things that I do to my own computer to make it faster, like going to msconfig and making sure the Startup List is unchecked. I also deleted those unnecessary things under IE-Tools-Internet Options like temporary internet files, cookies, history, etc. That makes my computer work better but when I try it on the laptop, it doesn't do a thing. It's still the exact same slow speed. I do have a Windows 2000 on my own computer and I've never worked with XP before so I don't know if there's a big difference there or what.

If anyone has had this problem or has any ideas on how to speed it up, that would be super!
Thank you!
 

A:very slow compaq presario

14 more replies
Answer Match 56.7%

I have a problem with my laptop screen. The screen is dark, however, the data is still there. Can't turn lamp on, or change anything, but can hook up to a monitor and it works. Can I fix the screen to work again? If I hit the button that turns the screen off and closes the computer down, the picture pops up for a few seconds and it is slightly red.
 

A:Compaq presario R3000

Its most likely that the backlight has failed. It can be fixes but it costs a upwards of $100 to do by a professional. You could try buying the parts online and doing it yourself though if you are technically inclined.

Here's how: http://www.laptoprepair101.com/laptop/2007/12/09/replace-laptop-backlight-ccfl-lamp/
 

1 more replies
Answer Match 56.7%

i have a compaq presario SR5210NX with windows vista home premium ,it has a problem in/windows/system32/ntkrnlpa.exe,the state is 0xc0000225 and the information says the kernel doesnt responde or isnt working .it says introduce the installation disk windows ,but i dont have it and i couldnt enter to the recovery system

More replies
Answer Match 56.7%

I'm trying to reformat my mom's old Compaq Presario SR1303WM. I've set it to boot from the cd-rom and I almost had it. But after deleting the partitions and starting a clean install it would only load the programs to 20%. After that it locked up and wouldn't do anything. I had to shut down and restart.

Now, it won't load from anything. Of course the old OS is gone so it won't start up on the hard drive and it won't boot from the cd. It just keeps going to a black screen with "Error Loading Operating System". Can someone please help me. I know they can't get a new computer and I just want to get a new install on this one to speed it up for them. They had a ton of malware and such on it.

Any help greatly appreciated.
 

A:Compaq Presario won't reformat

Since HP now owns Compaq, I am not sure what kind of cds you have in order to attempt recovery.
Per HP Support




HP computers that ship with Microsoft Windows XP do not come with recovery CDs. Instead, they use a hidden space (partition) on the hard drive to store the recovery information. The use of a separate partition provides a convenient process that eliminates the use of recovery discs that may be lost or scratched. A system recovery from the hard drive may not be possible in some circumstances. Your computer may contain Recovery Disc Creation software. Recovery discs for Windows XP are available from HP for a minimal cost. See Obtaining Recovery Discs for ordering information.Click to expand...

What kind of disk are you using to attempt restore, and are you using HP's support page?
Are you still set to boot from CD and to attempt to do so FIRST?
Is your BIOS properly identifying your hard drive?
What happens if you unplug the data cable from the hd before trying to boot to cd?
Do you have the "Recovery Console" option at some point during boot?
 

4 more replies
Answer Match 56.7%

Just throwing this out in case someone can help

I have a Compaq Presario 5461 and when the hard drive crashed I got a new hard drive off ebay (same model the pc came with). When I try to use the compaq restore disk, i get an error that pretty much says restore can't be run on that machine. I realize that these restore disks are somehow keyed to the machine so you can't use them on another machine, but all the hardware is the same except for a little more memory. Only thing I can think of is a bios update that I applied. Did that alter the "signature" of the PC. If so, would it work if I backed of the bios update?

At this point the pc is just a toy, i'm using it to learn more about hardware, etc. I was able to install windows and just used my license key that came with the computer, so thats not an issue. But it bugs me that I can't get this restore to work. I did also notice that PC does not have an asset tag - wondering if the bios update zapped that.

Other notes - there was no extra partition that I know of on the orig hard drive, and there is only one restore CD (no diskette). I was able to do a restore of the pc several years ago
so I am pretty sure the disk is not defective.

Any help or thoughts would be appreciated
 

A:Compaq presario restore

a different hard drive than the one the pc came with shouldn't alter the restore process.
What error is it giving you?
 

4 more replies
Answer Match 56.7%

hi everyone my best freind has a compaq presario sr2170nx and ever scince they've had it it would mak a loud noise for hours "like it was dieing and gasping for air" and then it became really slow and would freeze, but now it's to the point it just shuts off. now i think the fan went and the computer just keeps over heating but im haveing and extremy hard time finding the fan that gos to this computer. can anyone help and if u think it's something else pease let me know thank you
 

More replies
Answer Match 56.7%

My friend bought a new computer the other day without asking me for my opinion. I was wondering if he could put a better vid card in it. If so is it AGP 4x or 8x or no agp at all. THANX a bunch.
 

A:AGP on Compaq Presario SR1224NX

This doent help dude post system spec so that we can tell whether he can go for a AGP/PCIe or whatever his options are.
 

4 more replies
Answer Match 56.7%

Have a Compaq Presario 1020 - laptop. Info is as follows -
Series 2900A
Model FBV1433VQL1J
Serial V644HZD50299

Need a maintenance manual. Any help would be appreciated. Thank you.
 

A:Compaq Presario 1020

http://h10025.www1.hp.com/ewfrf/wc/product?product=94911&lc=en&cc=us&dlc=en&lang=en&cc=us
 

3 more replies
Answer Match 56.7%

Hope i am not in the wrong place ... so here gos

My Compaq Presario 2100 laptop got knocked off the table and broke the screen ,, its a 15 inch from corner to corner ,, will any other compaq models work on this Compaq Presario 2100?

Thanks in advance
 

A:Compaq Presario 2100

Maybe, maybe not. You'll need to check the SPECIFIC laptop replacement screen you're considering and see if it's a match.
 

2 more replies
Answer Match 56.7%

I have an old compa presario 1277 who supposedly had something called a monkey virus on it. This virus supposedly wipped out all the drivers. Someone reistalled them. However, my husband insist the monitor display does not look like it did and that it use to play movies. Do you have any suggestions?
 

A:Compaq Presario 1277

Is it this Presario 1277 notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=95012& ?

If so try reinstalling the Trident Display Driver from the available downloads.
 

1 more replies
Answer Match 56.7%

I have an older compaq presario 5000 (5wv260), i want to upgrade the memory in it. I know it takes sdram, 168 pin, but i dont know if i need parity or non-parity. OR ecc or non-ecc... anyone know what this computer takes?
thanks
 

A:compaq presario memory help..

6 more replies
Answer Match 56.7%

Hello, i have a compaq presario desktop. here are the specs:
512 mb ram
Windows vista
10 gb hard drive
amd athalon xp2 prossesor.

My problem is that is so slow.
 

A:compaq presario 6000

7 more replies
Answer Match 56.7%

A friend has a Presario X1300. It has a small problem. The power button only works once in a while (perhaps 1 in 20 presses). I thought perhaps it was a cold solder joint but even after touching up the button's pads its still has the problem.

It could be a bad switch, it looked like the switch had previously been replaced (although he hasn't had it serviced except to put in a new hard drive about a month before the switch went bad).

I found a post that indicated that someone found schematics for the motherboard and I was hoping that someone here would be able to point me in the right direction. I didn't find them on google. I'm going to replace the switch first, but if that doesn't work I have to assume there's some other problem that will need debugged.

I hate to see such a nice laptop go to waste because of a stupid power on problem.

I have found the service manual online. Its great, but has no schematics.

Thanks for any ideas you can offer.

Raydude
 

More replies
Answer Match 56.7%

I've searched this site, I've asked HP/Compaq, and I've checked search engines but still don't have an answer, so wondering if I can find it here.
I have a Compaq Presario 700 with what I believe is a dead hard drive. I want to replace it, but not sure if it is necessary to copy the files from the drive first. I don't think it's possible, as the drive doesn't seem to work at all. Can I replace it with a new (upgraded) hard drive and just run the original Windows QuickRestore discs, or is there something more to it that I would need?
Here's what happens: I switch the laptop on and it wants to start up, but then, before Windows is running, the hard drive begins it's lovely scraping and clunking noises and I eventually get a black screen with plain text saying windows had to shut down... and is beginning dump of physical memory. Of course, this all started after some fool (maybe me, maybe not) dropped the laptop.
Every site I've checked says I'll need to create a backup of all files before replacing the hard drive. I didn't have anything on there that I need to save, so am wondering if I can just run the QuickRestore and get back to business as usual.
 

A:Compaq Presario HDD replacement ?s

Welcome to the TSG forum.
Which Compaq Laptop ???
http://h20180.www2.hp.com/apps/Look...ery=Compaq+Presario+700&submit.x=9&submit.y=3

Have you backed up all your personal Data ??

Yes .. just put in a new HD .. and run the recovery CD/DVDs
This'll put it back to the way you bought it .. assuming no other problems.
 

2 more replies
Answer Match 56.7%

I bought this compaq presario 1800T from a garage sale and when I first turned it on it took at least 30min. for it to completely boot up and run fine. Cna some tell what to do for it to run faster. Also it has no memory chip and it runs on xp and was designed for ME or 2000.
Im also trying to get internet on it.
Please Help!
 

A:Need Help with compaq presario 1800T

how can it run with no memory? You will at least 1 gb of ram to run XP well. 512mb at the minimum to be acceptable.
Read the upgrading/troubleshooting ram guide in the guides forum before installing ram.

read the speeding up computers/system guide in the guides forum to see how to speed up your system. It is old, so bear in mind it really is only good for office work.

It has a built in telephone modem port and a LAN port for internet.
If you want to go WIFI (wireless) you need to buy a WIFI card for it.
 

1 more replies
Answer Match 56.7%

hi,

i have one compaq c500,it's some keys are not working.i have to open it,i tried to open but can't , any one can help me.
 

A:compaq presario C500

Hiya and welcome to Tech Support Guy

I've removed your email address, as we reply to the forum, and putting it up may give you spam.

Can you explain a bit more on what you're trying to do? You say open it, do you mean log on?

Regards

eddie
 

1 more replies
Answer Match 56.7%

hi,
I have a compaq Persario M2000. The other day, I was using the touch pad to move and it just shut off. I tried to turn it back on and nothing happens. When I look at the AC adaprter led it is not turned on and it is plugged in. I removed the battery and tried the same with no luck. the ac adapter led is still not light up. The battery is fully charged, and when i try just that nothing happens. I opened it up and removed the bios battery and checked the chips and circuits. nothing seems out of place ot burnt. I used a multi meter to check the power button and it is getting power, as well as the curcuits in the ac adapter
can someone help me or give me some ideas what my nxt step is?
thanks
 

A:Compaq Presario Will not turn on

I had similar problems with compaq laptops - it's the power supply in your laptop - the repair for that is about $300+

check your warranty before doing anything else...
 

2 more replies
Answer Match 56.7%

I was not sure just where this question should go so if this is not the right place please feel free to relocate it.

I have THIS desk-top:

Hewlett-Packard Compaq Presario CQ2723wPC
Windows 7 Home Premium 64 Bit
AMD EI-1200 Accelerated Processor
Memory = 4GB/G(something I can't make out) DDR
HardDrive = 500GB/
I am running a PPS PE9 photo effects program that is only working about 50%

I have found the minimum requirements for running this particular program:

Open GL 2.0 capable video card with 256MB dedicated RAM
Memory 8GB+

How do I find out what kind/size of video card, how much dedicated RAM, and available memory my unit has ?

If my unit is falling short in any of these requirements, is this something I can buy and is it within my abilities to make the necessary improvements ?

I am quite mechanically/electrically adept but I know little about the insides of a computer.

Thanks for reading.
 

A:Compaq Presario Particulars ???

The Compaq Presario CQ2723w Desktop PC(H2L89AA) comes with Windows 7 Home Premium SP1 64-bit and comes with this hardware:
Pegatron APXD1-DM(Redwood A) motherboard
AMD E1-1200 APU 1.40 GHz dual core processor which has an average benchmark score of 682
4 GB of DDR3-1333 RAM
Intel Radeon HD 7310 graphics which has an average benchmark score of 171
Realtek ALC662 high definition audio
Atheros AR8152 10/100 Mbps ethernet
500 GB SATA hard drive
Super-multi DVD burner disc drive
65 watt power supply

If you wanted a desktop that's speedy and has plenty of hardware upgrade options, you couldn't have picked one much worse than this one.
Its motherboard has no expansion slot for adding a graphics card, so you're stick with its wimpy integrated graphics which uses up to 1961 MB of shared memory.
Its slow wimpy processor is soldered to the motherboard and not upgradeable to a faster one.
It has only 4 GB of RAM, but it supports 8 GB, so you do have the option of adding more.

----------------------------------------------------------------
 

1 more replies
Answer Match 56.7%

I have a Compaq Presario C74EM which I just installed Win 8 RP. The sound did not work.

Eventually I was able to find and install drivers - sound still didn't work, but after following the advice on a forum post, I put the computer to sleep, waited a few minutes, woke it up, and sound now works.

This computer came with Win Vista home. Supposedly the Compaq Win7 drivers will work with Win8. Compaq (hp) has utilities that will go through any/all drivers, and update to the latest.

Does anyone know how to get this going under Win 8?

More replies
Answer Match 56.7%

I have a compaq Presario and I want to format the hard drive. This unit has a c:PRESARIO with 68.56 GB 16.7 used and 51.7 free File system NTFS and d: Presario_RP 5.98 GB, 4.49 Used, 1.49 Free, File System FAT32
Is there anything I need to know befor I do this?
I can not find the org. disc that came with the computer, but i have my xp disc from my lap top will that be ok and or do i need that
I ran the malware and found 16 viruses. A lot to do with tool bar locations or something.
The system is still running extreamly slow takes forever for the "MY COMPUTER" screen to load.
I did find that it runs like new in safe mode if that helps.
Please help
Paula

A:Compaq Presario very slow

I have a compaq Presario and I want to format the hard drive. This unit has a c:PRESARIO with 68.56 GB 16.7 used and 51.7 free File system NTFS and d: Presario_RP 5.98 GB, 4.49 Used, 1.49 Free, File System FAT32Is there anything I need to know befor I do this? I can not find the org. disc that came with the computer, but i have my xp disc from my lap top will that be ok and or do i need thatI ran the malware and found 16 viruses. A lot to do with tool bar locations or something. The system is still running extreamly slow takes forever for the "MY COMPUTER" screen to load.I did find that it runs like new in safe mode if that helps.Please help PaulaIf you have all of your pic`s, music and anything else of importance backed-up then you are all set.You probably did not get any discs with the computer. The D: drive is a "restore partition" = RP. This is an exact image of your computer when you first bought it. To use it: When you first start the computer there will be a black screen with probably three different choices of keys to press. One of them will be something like system restore or restore. Hope you get the idea. Select the proper key and follow the onscreen prompts.One other option may be to go to the HP\Compaq (HP bought Compaq) site or call them. You may be able to get the discs for a small fee.

1 more replies
Answer Match 56.7%

I have a Compaq Presario running xp professional with a phone jack for internet connection(no Ethernet port). I would like to connect it to my att frontier modem that uses cat 5. I bought a j5 jue130 gigabit Ethernet adapter(that has a j45 to usb).I would like to know if this computer is capable of connecting to my service and if so how do I configure my computer. I loaded the correct driver for the adapter but can't get connection.
thanks

A:compaq presario 1200

Hello grafenwohr
Have you looked at using the computer with a wireless connection from your modem ?
 
Check with your Internet Service Provider for setting it as wireless.. Who is your ISP ?
 
Any Good ?

4 more replies
Answer Match 56.7%

I have a Compaq Presario 2700T with problems. When I press the start switch it runs for about five seconds and then shuts off. It doesn't even run long enough to give me any screen image. It does this on every attempt to start the computer now. Prior to that it flashed a blue screen on a previous start attempt but not long enough to read what it said.
Any ideas what is going on?
 

A:Compaq Presario 2700T

I took the keypad off and found the heatsink and fan loose from the motherboard. The four soldered nuts that the heatsink and fan mounting plate screw onto are broken off from the motherboard. I am not sure if this is what is causing the problem but it's not good. I tried to start the computer while holding pressure on the loose mounting plate but it did not make any difference.
 

1 more replies
Answer Match 56.7%

This is an older system. What manipulation of the case needs to be done to add / remove the hard drives?
 

A:Compaq Presario HD Installation

8 more replies
Answer Match 56.7%

Hey all,

I have this older Compaq Presario 7470 CPU, and I can't figure out how to open it. It doesn't have any buttons that pop open the chassis, or at least any that I can easily spot. I got a memory upgrade for it, and would like to put it in. Anyone know how to pop this thing open? Please email me or just reply here. Thanks!

Thanks,
Matt
 

A:Compaq Presario 7470

Here's a link to their site with instructions.
 

2 more replies
Answer Match 56.7%

Right heres a very specific enquiry...

I have a Compaq Presario SR2125UK

Im looking to upgrade the graphics to a BFG 8800 GTS OC 320MB or the 640mb.

First question is can my processor handle it? (Intel Pentium D 915)

I know i have to upgrade the ram so im purchasing 4GB of DDR2 RAM for about £50 and im replacing the PSU probably with an OCZ Stealth 600W PSU. Do that sound viable? Ive only got 32bit windows so i know im loosing out on some ram but its a package deal lol.

I have tried reading into all the requirements for these upgrades such as power connectors from PSU to graphics card and motherboard and think i got a bit lost.

The BFG requires 12v of something which the OCZ provides along with more than enough power (425w required for BFG), plus both the motherboard and the PSU are PCI express compatible. And i have an extra slot to accommodate the doubledecked size of the BFG.

In terms of the required power connectors i was a bit lost. The OCZ said it has a 6/8 PCI express pin which is what the BFG requires but can somebody shed some light on this?

But im really just concerned that it was going to fit and work!

These purchases come to around about £150 so dont want to be thinking for another 100 squid i could have just bought a XBox 360! lol

Basically Im asking advise on the above upgrade decisions and any tips anyone has on installing these?

Any help would be appreciated, im sick of only being able to run pre-2005 games on a pc bought in 2007! I was pretty suc... Read more

A:Upgrading my Compaq Presario

16 more replies