Tech Problem Aggregator

printed text cropped off at R side of page

Q: printed text cropped off at R side of page

I use two printers at two locations w/different computers and have the same problem on both. Many (most?) web pages have info on left side of screen that I do not want to print (such as at this web site). When I print the page I get the left side panel and letters or words on the right are cut off which I need to fill in by hand. Some sites offer "printable view", but I don't recall having a problem with that. Probably not.
Is there a way to adjust the page so that all desired text is printed?

A: printed text cropped off at R side of page

9 more replies
Answer Match 67.2%

When I'm reading a message I have to scroll right to see the rest of the sentence. Is there a way to show the entire message in one window?

Thanks
 

A:Solved: Remove necessity to scroll side to side in order to read text.

11 more replies
Answer Match 67.2%

G'day everyone - I suspect this issue will be a tough one to get help with!

I've attached a screen-capture of a Microsoft Office Excel 2007 spreadsheet I'm working on at the moment. As you will be able to see on the screen-capture, I've marked the areas of interest and will explain here...

When I enter a name in this column (marked as '1'), I want the spreadsheet to check another column (marked as '2') to see if there is a match. If there is a match, I then want the spreadsheet to check the column marked as '3', and subtract that amount from the column marked as '4'. If there is no match between the column marked as '1' and the column marked as '2', I don't want anything to happen.

I hope that made sense, and if anyone can help me with a solution here, I would greatly appreciate it.
 

A:Solved: Calculating Side-By-Side Cells Dependant On Text Entries In Excel

8 more replies
Answer Match 64.68%

Hi, I've started getting a strange 'pale' line or banding down the very left side of my printed photos. I first noticed it on a night shot (see link below) and then on the other one link below, a daytime one.

All the ink cartridges are full or almost full and I've done nozzle check and head cleaning. It doesn't show up on a greyscale B&W print I did (or at least not that I could notice).

It's on the leading edge, the part of the image being printed first when using the full size paper eg. A4, 10x15cm.

On a whim while writing this I just tried printing a 7"x5" image in the middle of a sheet of A4 and there was NO banding. Same result with a margin of 2cm rather than the default 0.5cm.
With the 0.5cm default margin, it's like whatever is going on only affects the next 0.5cm of the paper (the first 0.5cm of the printed image).

Is this a paper-feed thing then?
Any ideas how to solve it to avoid wasting lots of paper?
Other than this the printer, whilst old, is still very good

Thanks.

Genuine Epson Inks TO481-6

https://www.flickr.com/photos/cjs696...n/photostream/
https://www.flickr.com/photos/cjs6969/15842139731/

A:Epson Photo R300 - single thin banding-line on left side if printed photos

Tried to realign your cartridges?

2 more replies
Answer Match 64.26%

Using HP J4680 printer. Some of the pages I print size I print from web pages are so small it is hard to read the printed pages.

Is there a way to change the printed text size?

If so how?

Thanks

Gary
 

More replies
Answer Match 62.16%

How do i 'Place Pictures side-by-side on a webpage? i currently have the following pictures on my web site but they are shown vertically as one scrolls down the page. i would like to place them side by side.
thanks

<center><img src="http://MYPICTUREADDRESSHERE.jpg" alt="---" border="0" />

<center><img src="http://MYPICTUREADDRESSHERE.gif"---" border="0" />
 

A:How do i 'Place Pictures side-by-side on web page'?

well, by having center around each individually they will be on their own line.

Do this.

<div style="text-align:center;width:100%;">
<img src="someurl"/>
<img src="someurl"/>
</div>
 

3 more replies
Answer Match 60.9%

Hi

I suspect this might be a fairly common problem. Whenever I print there also seems to be a block of about 5 fine lines printed over the text for about ever new line of text. Now I recently bought a new (high capacity) cartridge which costs a fortune, so I'm not too keen to buy another if it is the printer (about 6 years old) which is the problem.

Has anyone else had the same sort of problem?
 

A:Solved: Lines through printed page

Try cleaning the print heads, this is the normal solution to this problem.
 

2 more replies
Answer Match 60.48%

When I print I am getting a blank page between each printed page. Even if my document is one page it prints a blank page after it. I can also print a selected page, as in "print page 2" but it still prints a blank after it. The blank page does not show up on the preview.

I have a HP Deskjet D1300 and am running Vista Home using Word 2007. Is it a printer problem or a Word 2007 problem? Any suggestions?
 

A:Getting un-wanted blank page between printed pages

I think you may have the printer set to print separator pages.

Look around in your printer properties (Control Panel>Printers>Printername>>Right Click>Properties) and disable.
 

1 more replies
Answer Match 60.48%

Three days ago when I tried to print from the web and then WORD there was no installed printer. I checked and the printer was still installed but when printing a document the print screen said their was no printer installed. I checked and the print spooler was not working. So I downloaded the Microsoft tool MicrosoftFixit.Printing.Run.exe. I ran it and presto the printer worked but only once and when I went to print again, again the print box showed that there was no printer installed. So I have to run the Microsoft.Fixit.printing.run.exe tool every time I want to print a page then restart the computer. A royal pain and time waster.

Something is turning the spooler off and not allowing individual programs to see the installed printer and therefore reports that there is no installed printer.

2nd issue. this is a new laptop (ACER) and there is no LED light to show "Caps Lock". I did find a setting that flashes the screen and makes an audible beep. However, my wife has the exact same computer and hers has a 2" x 2" box appear each time she puts cap Lock on. Which is way less distracting than audible beeps and flashing screens. Is there a setting for this? I have not found one in the Microsoft website for Windows 7.

Help,
yarlac

A:Print Spooler turns off after each printed page

Stop the print spooler servicePress Windows+R key and copy this path%WINDIR%\system32\spool\printersclick okDelete the files in the folderRestart the PC and try to print nowFor second issueDid you install ACER launch manager? It is responsible for caps lock notifications

5 more replies
Answer Match 60.48%

is it possible to print both sides of a page without manually putting the page thru twice?  Or is a duplexer required to be added to the printer.

More replies
Answer Match 60.48%

Hi all

I have a HP officejet v45, which has had new hp cartridges installed recently. Alignment page printed and aligned. Colours on tis page where as normal. After this I could only print about 30% of a page going across the page. Tried printing test page which again only printed about 30% of normal. Have uninstalled printed removed drivers and software via ADD/REMOVE PROGRAMS in Control Panel.

Have used both the installation disc and a downloaded set of drivers and software from the HP website to reinastall the drivers to no avail.

I need the printer to print off CV's for an interview for a new job over the next few days.

HELP please........

Tahnks for any help on this matter. I am using XP SP3, recent updated via microsoft website.
 

A:Printer test page half printed

7 more replies
Answer Match 59.64%

I have a HP C4850 configured to work through the wireless. I can ping the printer and access its internal web page. Network configuration prints out no fails or errors so as far as I can tell everything is configured correctly. If I send it a print job, a small notepad document with the text "test" in it, it won't print. Eventually it just seems to forget the print job is there. However if I send the job, then print the network device configuration, the print job will print immediately after. I did this 3 times and it was consistent in its behavior. I'm at a complete loss, any ideas?
 

A:HP C4850 won't print until network status page is printed

Any ideas of where to start?
 

1 more replies
Answer Match 59.64%

I created a simple two column daily schedule for work. when I printed it, there were crooked triangles that appeared...yet they were not seen on my work before printing. There are 4 of them.
Any ideas how to get rid of them? thanks!
 

More replies
Answer Match 59.22%

Hello everyone

I recently installed Outlook 2010 and I have got the following strange problem and I was wondering
whether anyone else had the same problem and found a solution.

Whenever I print an Outlook email, the pages come out in reverse order (page 2 then page 1) with a blank cover page which sometimes has "Microsoft Outlook - memo style OUTLOOK.EXE" printed
on the middle of it, and a blank sheet between each page of the message.

It only happens with Outlook. Printing is normal with Word, Excel, etc.

Any suggestions, please?

A:Outlook 2010 emails being printed with blank pages between each page

In Outlook please go to File - Print, highlight Memo Style, then click Print Options button above. In a new window Print, hightlight Memo Style again. Click Define Styles... In a new window, make sure that Memo Style is hightlighted and click RESET button.

If this wont help, click Edit button in the same window, and make sure all the parameters make sense and are correct (page size, etc.)

3 more replies
Answer Match 59.22%

I have graphics that I would like to print, but the address, date & time are printed on the page. Is there a printer setting that would remove those?
Many thanks!
 

A:Solved: Remove address,date & time from printed page ??

10 more replies
Answer Match 58.8%

I have an Access database used on daily basis to enter and print the maintenance work order in a report format. I have assigned a command button to print the required record. On clicking the button in the Form, a parameter query will run asking the user to put the record number to proceed. Once the correct record number is entered in the parameter text box, the report is previewed and the user click on the print button to print the same.

My question is as follows:

Is there any method to find out the record i am going to print now was already printed before? A kind of record keeping for the printed records.

Also, a message box should warn the user saying incase if the record was already printed, “The record was previously printed, do you want to continue printing again?”

Please tell me a way to perform the above in my Form.
Thanks,
Hash
 

A:Record keeping of the printed records & warning user when printed more than one time

could't you just add a field in the record for printed?

Then if printeed true, show warning, else show printable form.
 

2 more replies
Answer Match 55.02%

With our dell 4400 series computer and Windows XP home edition operating system when we print out text from info on the internet the result is a page that clips off about 8 or 10 characters on the right margin of all lines of type. This does not occur if the material offers a printable option but they seldom do. We have altered the page setup offered when clicking on "File" at the top brow by moving the margins but even when shifting the text to the left the problem persists. Our printer is a HP 952C.
 

A:Missing print on right side of text.

It is a known problem. You did the usual "help (not fix)" by modifying your page margins.

The next thing you might try, if you haven't already, is to change the page printout orientation to landscape, instead of portrait, (horizontal instead of vertical).
 

3 more replies
Answer Match 54.6%

Pretty self explanatory... This issue only happens on my laptop. As you can see from the picture the right side of the screen cuts off the text...

I'm using Firefox version 3.6.12 with Windows XP Pro.

A:[SOLVED] Right Side of Screen Cuts Off Text

I'm not sure why but it looks as though my picture did not attach to my message... Here it is again.

8 more replies
Answer Match 53.76%

Hello Everyone,
I have tried searching and searching for this problem but nothing seems to come up with this particularly odd problem. I'm actually running 3rd party software hosted on an AS/400 system but from a Windows 7 32-bit computer. If I right-click the title-bar of the window and select print, the print dialog box comes up asking for the printer I want to use. I select one, then click "Print" and the following comes out on the page....
<See Sample.jpg> (Of course, that's not an actual page, it's a representation of what you'd see on the page, but it's accurate despite the fact that it's color. Anyway, the print screens come out light and don't scan in well.)
As you can see, the print dialog box is clearly visible on the page. This seems to randomly crop up only on Windows 7 boxes and once it starts, we seem to have no way to stop it.
HEEEEyyyUUULLPP!!!
Thanks,
 

More replies
Answer Match 53.76%

Hey guys,

I have a client at my workplace who has some problems in Internet Explorer 7 on a Windows XP desktop system.

You see, every time my client wanted to print out something, he/she usually goes into print preview. From there, there is a blank page on the first page, but there is some text on the second (and subsequent) pages. He/she is trying to print from a pop-up window with the menu bars and buttons in place.

I have to experiment and play around with the zoom buttons and even change it from portrait and landscape. My client is trying to print some reports and statistics for the VOIP lines on the administration page. How do I fix the particular issue?

My best guess is to upgrade the entire IE web browser to 8 (or maybe 9). Any other suggestions?

A:IE7 - print preview shows blank on first page, but some text on 2nd page

Hello simon726,

I would recommend upgrading to IE8. IE9 is not compatible with XP.

Also is the computer running the latest service pack?

3 more replies
Answer Match 53.34%

I have an HP LaserJet 1020 attached to a WinXP Pro workstation via USB. I have an Intel iMac networked with the PC wirelessly. I can detect the LaserJet on the iMac just fine, and on the iMac, documents spool and even say they have printed (they show up in the "completed" section of the printer control panel).

So, the iMac thinks the document printed, but it never did. When I look at the print queue on the Windows machine, I see "Remote Downlevel Document" in it. I assume that the iMac is printing to a port instead of starting the Windows Print Spooler, and this is why it is showing up with this name.

When viewing the LaserJet's queue on WinXP, the downlevel document is "Printing," and "113k/113k" has been transferred. But the document never prints - if I try to "cancel" the document in the Windows print queue, it says "deleting" for a verrrrry long time. Documents can be printed just fine locally on the Windows workstation.

Thanks in advance!
 

A:Shared Printer says "completed," but no page printed

are you using windows workgroup printing? How are you connecting to the printer?
 

2 more replies
Answer Match 53.34%

Hello there everybody.

Today happened something very strange and annoying in my PC.

I turned on my PC and started using Facebook normally, it was a bit slower than usual and then suddenly, it didn't load anymore. I tried more than once, but then it started loading only text on the left side of the page and I couldn't use it practically. This happened also with Yahoo, but I didn't see it happening with some other websites, they work totally normally.

I stress I have tried clearing the whole cache and history of Google Chrome and Mozilla Firefox, system restore, check of sfc.exe, creation of new user account, running of an Ubuntu LIVE CD, uninstallation of all browsers and installation of the latest versions once again, changing of the MTU to 1500, turning off my router and antenna but unfortunately nothing has worked till now.

What wonders me is that Facebook works normally on my laptop which uses wireless connection provided by the same router and antenna.

It is really annoying me and it would be very nice if someone could suggest me something else from the things I mentioned before :(

A:Facebook and some other pages load only text on the left side, no graphics

Hi make sure you have the latest updates for flash and java installed you may need to install on the other browsers too

2 more replies
Answer Match 52.5%

On I.E. 8, the new msn page only shows up in a column on the left side of screen.The links work and it has a search window.

A:why does new msn page only the left side

I just visited the page in IE 8 and there is a big blue bar at the the top that says "Your browser is outdated".That's likely the problem. IE 8 hasn't been supported on XP in 6 months. As time goes on you will experience more and more issues opening websites on IE 8.Unless you want to invite viruses and worms, you should move onto Google Chrome, Mozilla Firefox, or Opera. All of these browsers are regularly updated for XP.http://sdfox7.com

3 more replies
Answer Match 51.24%

Can't move the cursor off the active screen to the top, right or bottom. But when I move the cursor to the left side, it goes forever.

I often do a split screen e.g. to look at two panels concurrently, you can go to the option between minimize & maximize (does this mode have a name???), move the panel to the right and you get a half-screen on the right. Do the same with another screen, move it to the left, and you again get a half-screen. Dunno what this feature is called, but it exists in Win7 & Win8, great for doing copy-and-paste from one to another.

Problem is, when I drag to the left, it goes off into space.

Any ideas what is happening?

rgds, g.

A:Cursor moves off the page, left side only

Originally Posted by GMWolfe


Can't move the cursor off the active screen to the top, right or bottom. But when I move the cursor to the left side, it goes forever.

I often do a split screen e.g. to look at two panels concurrently, you can go to the option between minimize & maximize (does this mode have a name???), move the panel to the right and you get a half-screen on the right. Do the same with another screen, move it to the left, and you again get a half-screen. Dunno what this feature is called, but it exists in Win7 & Win8, great for doing copy-and-paste from one to another.

Problem is, when I drag to the left, it goes off into space.

Any ideas what is happening?

rgds, g.



It 'sounds' like your Win 8 OS thinks you have multiple monitors for some reason...not sure how to fix it though.

1 more replies
Answer Match 51.24%

Do I have to have that big right side ad bar when I pull up my outlook email account?
I saw an internet page that said Windows Live Ad Remover Userscript. but I don't know if it's a good thing or bad thing to click!!! Thanks for any help :+) Janet
 

A:remove ad bar on right side of outlook email page?

you may use firefox or chrome and an ad-blocker addon which will display a blank paneORyou can pay 20$ a year for adfree outlook (http://windows.microsoft.com/en-us/outlook/ad-free-outlook)ORyou can use a program such as windows mail or Outlook to read your mail.PleaseDo Not Click on some terrible page that will purport to remove the ads.

1 more replies
Answer Match 50.82%

I had a paper jam in my printer so I removed the drum/toner unit to unjam the paper when I accidently dropped the unit on my desk. This let toner spread everywhere. So I took my spray dust remover and sprayed it off the desk and sprayed the bottom of the drum and inside the toner area in the printer. Since then, the printer prints random light gray spots all down the left side of the page on every page printed and only on that side of the page. I did the "clean page" to the printer with no results. Any suggestions?
 

More replies
Answer Match 50.82%

I'm doing some thread cycling, new questions for all you nice people out there.

Whenever I open my laptop back up, and hit the power button, it takes about 60 seconds to reach the password page. Once I type in my password, my computer hangs for about 2 minutes.

I had a Vaio VGN-NW265D laptop, with a bluray drive. I've used my bluray drive a handful of times within the last 1.5 years, and I'd rather have the performance. How would I go about putting in a SSD and installing windows 7 on that? I'm somewhat new to mods, but I'm affluent with computers.

A:Taskbar takes up half my page (autohide right side)

Rightclick in the taskbar and make sure "Lock the taskbar" isn't selected.
Now go to the borderline between desktop and taskbar until that little Arrow left/right appears.
Hold down the left mouse button and pull the task bar back to the size you desire.
Rightclick the taskbar and select "Lock the Taskbar"

-DG

9 more replies
Answer Match 50.82%

This computer's antivirus has been messing up & I believe that it also has malware of some sort. It also likes to hang @ startup and I would really like some help.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 8:51pm 11/01/2010Platform: Windows XP SP2MSIE: Internet Explorer v6.00Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\CA\SharedComponents\HIPSEngine\UmxCfg.exeC:\Program Files\CA\SharedComponents\HIPSEngine\UmxFwHlp.exeC:\Program Files\CA\SharedComponents\HIPSEngine\UmxPol.exeC:\Program Files\CA\SharedComponents\HIPSEngine\UmxAgent.exeC:\PROGRA~1\COMMON~1\AOL\ACS\AOLacsd.exeC:\Program Files\CA\CA Internet Security Suite\CA Anti-Virus\ISafe.exeC:\WINDOWS\eHome\ehRecvr.exeC:\WINDOWS\eHome\ehSched.exeC:\Program Files\CA\SharedComponents\PPRT\bin\ITMRTSVC.exeC:\Program Files\Java\jre6\bin\jqs.exeC:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXEC:\WINDOWS\system32\nvsvc32.exeC... Read more

A:IE is acting weird everything lining up on the left side of the page

The Espn doc is just to show the page lining up on the left side weird===========Hello While we understand your frustration at having to wait, please note that Bleeping Computer deals with several hundred requests for assistance such as yours on a daily basis. As a result, our backlog is quite large as are other comparable sites that help others with malware issues. Although our HJT Team members work on hundreds of requests each day, they are all volunteers who work logs when they can and are able to do so. No one is paid by Bleeping Computer for their assistance to our members.Further, our malware removal staff is comprised of team members with various levels of skill and expertise to deal with thousands of malware variants, some more complex than others. Although we try to take DDS/HJT logs in order (starting with the oldest), it is often the skill level of the particular helper and sometimes the operating system that dictates which logs get selected first. Some infections are more complicated than others and require a higher skill level to remove. Without that skill level attempted removal could result in disastrous results. In other instances, the helper may not be familiar with the operating system that you are using, since they use another. In either case, neither of us want someone to assist you who is not familiar with your issue and attempt to fix it.We ask that once you have posted your log and are waiting, please DO NOT "bump" your thread or make further ... Read more

52 more replies
Answer Match 49.98%

Hi,

I drew a very thin rectangle (color filled) on the right side of a page. All the way form the very top to the very bottom of the page and the right side of the rectangle kinds of sits right on top of the right page border.

The problem is that I can't see the "rectangle" either in print preview nor does it print when I print the page Can someone help on out on this one pls. Thx.

P.S
The attached image shows what I mean by the border and where it is placed (see the blue filled long rectangle on the right border of the image)
 

A:MS-Word: Unable to get a thin filled rectangle on the right side of the page

9 more replies
Answer Match 46.62%

I have a friend who is running XP with IE6. He tried to sell something on Ebay, and everything was fine until he tried to enter the description of the product. He was unable to get a cursor in the text box to enter text. The same thing happened on another site where he needed to enter text on an online form. No cursor. We tried changing the location of the computer, and switching from dial-up to DSL, no change. I was able to connect to the same site with my computer on the same DSL connection and no problem entering text. But his will not allow him to enter text in some text boxes on a web page through IE6.

Any ideas how to fix other than format/reload XP?
 

A:No Cursor in Web Page Text Box On IE6

bump
 

1 more replies
Answer Match 46.62%

hi

i recently have run into a lot of web pages (prob. flash) that dont allow youto copy and paste text from the site; is there a way around this? like some sites have a tracklists or some instructions that i'd like to copy and then save but can't any more

please help

thanks
 

A:how to copy text from a web page?

7 more replies
Answer Match 46.62%

I have this problem when I visit a particular forum that I am a member of. The text just goes off the page and I can't scroll horizontally to read it.
Here is a few screen shots of what I am talking about.

Note the text continuing out into nowhere.



Here I can Read the text but the profiles and avatars are off the page.



And Here is a normal looking page.



I have no idea what to do and it is annoying as hell. I've googled several times but can't seem to come up with the right terminology to get the correct search results. PLEASE HELP. Thank you. I'm sure youll need more info. Just ask.

A:Text continues off page (HELP)

Is this happening on all sites? Or just certain ones? If it is just certain ones, maybe you can adjust your setting to that particular site. Check in user CP.

2 more replies
Answer Match 46.62%

Hi All,

I have what may be an unusual question. How do I post a plain text-only page up on the internet? An example of what I want is http://www.aliebling.com/sigs.txt

There's no html on this page. Only plain text.

I tried to do this on Google Sites using the "Add Files" feature, but when I go to the link it goes right to a "download file" dialog box which is not what I want.

Example: https://sites.google.com/site/jaiamm...r_sig_line.txt

Any ideas? Let me know if my question is not clear. Thanks!

Advait

A:post text only page to web with url

What happens on Google sites if you change the file extension from txt to html?

3 more replies
Answer Match 46.2%

To my own stupidity I was writing a paper inside an active web page. I had saved the text to the clipboard, but inadvertently copied over it. Then in what amounts to even greater stupidity I hit the back button in IE and lost all the text in the previous window. My question is, if I have not closed IE since this happened, is there anyway to recover the text? Does it reside somewhere in memory, temp file, cookie etc? I have tried going back through IE history etc but when the same window appears the text is missing. I know it's a long shot but I have to try....
 

A:Lost Text In Web Page. Can I recover?

As far as I`m aware, you`ve lost it for good.

I know it`s a bit late now, but the Windows clipboard is very limited. I recommend you use the DzSoft Paste & Save, it can hold mulitple clipboard entries and won`t lose them.

I do a heck of a lot of copy and pasting and find the above programme very handy.

Regards Howard
 

4 more replies
Answer Match 46.2%

Hello!
I wonder if there is a software or addon for any of the Internet browsers that allows to receive an alert when a page changes. The page is updated every 10 seconds. The change is defined as the appearance of specific text. Please help me to find the appropriate software - I cannot find anything. One more thing - the page is a part of the password protected are of a site.
Thanking in advance!
Dima
 

More replies
Answer Match 46.2%

In FP2000, I have table with a row that contains four words. I want the words to be equally spaced apart, the first word left justified and the fourth one right justified, the other two equally spaced in between. Is there a way to do that other than manually trying to line them up?
Thanks

theolddog
 

A:Front Page Text Spacing

I just figured a way around it by setting up a four column table and then hiding the borders. It looks great!

Thanks anyway.

theolddog
 

2 more replies
Answer Match 46.2%

I occasionally use an online translation program such as Babel Fish to translate website material (highlight, copy, past, translate).

Today, using Photoshop Elements 3, I scanned a page of Japanese text. For what it's worth, I have a choice of 15 different "Save" or "Save As" formats.

Is it somehow possible to transfer my scanned page to an online translator such as Babel Fish in order to have it translated? I just assumed that it would be simple to do, but now I'm not so sure.


I would greatly apprectiate hearing from anyone who is able to help. Thank you very much.
 

A:How do I translate a page of scanned text?

16 more replies
Answer Match 46.2%

Hello everyone

The following question was asked way back in 2004 but I can't find the answer, and I've got exactly the same problem today! I would be really grateful for help with this - I have copied and pasted a long article coming in at 288 pages and I want to reduce it to 144 pages!

Please help a humble, non-computerized soul out. I have pasted 161 pages of
text into word from an e-mail. I want to print it out, but each line only
goes halfway across the screen and then begins a new line.

The borders are maximized, and it should really be reduced to only 80 pages
in length, but I can't figure out how to make the pasted text fill the
document (side to side) without going through it, line by line, and deleting
the empty spaces (they seem to be the result of hitting enter).

I've done this before with short e-mails and usually I just go through, line
by line, and delete the spaces. But this time, it will take me hours and
hours to do that. There has to be a way to make the text fill the page...
please help!!!

Thank you!
 

A:Pasted Text Won't Fill Page - Please Help

I suspect that the 'copy' is also coping the 'end of line markers' off the original line length ... past your 'copies' into a non-formating writing program like MS Notepad.

Notepad will strip out any and all format except, I believe, paragraph returns. I may be wrong on the last bit. Then copy-n-paste into Word, or whatever you're using.

You will, however, have to reformat the whole thing to match the original.

Now, after saying all that, you could, if using MS Word turn on the 'formatting controls' so you can see where & what format has been set, then, once again you will have to go through the whole document to check the format to the way you want it.

Either way, I think you's in for a long haul, good luck, hoped that helped.
Welcome to the forums.

 

5 more replies
Answer Match 46.2%

HI:

All of a sudden, my gmails are running off the screen. I cleared my cache, actually, cleared out all the junk I could think of, but that didn't help. There's nothing in Gmail's settings that I can find that lets you set a margin. Nothing out in cyberspace about this problem particular to Gmail.

Suggestions, anyone?

Many thanks,
Jane
Using Firefox
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 6019 Mb
Graphics Card: AMD Radeon HD 7730M, -2048 Mb
Hard Drives: C: Total - 715301 MB, Free - 628318 MB;
Motherboard: Dell Inc., 0HDRR5
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Gmail Text Runs Off the Page

11 more replies
Answer Match 46.2%

sometimes i go to a website and the paragraphs are too wide for my monitor, the test just runs right off to the right side of my IE browser screen like christopher columbus falling off the edge of the earth,

is there any way i can do something like a word wrap for internet explorer?
 

A:text runs off the browser page

Depending on the size of your monitor you could change the screen resolution
 

2 more replies
Answer Match 46.2%

I've never seen a problem like this before today. While browsing the web with either IE or Firefox, there is a small to medium amount of the text that does not appear. The page formatting is in order, only the display of text is in error. Even when highlighted its still invisible, but appears when copied and pasted. I can include screen shots if needed, but I don't know how to explain it any better.
 

A:Web page partial text missing...

Here is what I see, when I view the post I just made.

http://i2.photobucket.com/albums/y44/anewn/screen1.jpg
 

1 more replies
Answer Match 46.2%

Help! Out of no where, my desktop icons are now huge. The desktop page does not expand the full width of my screen...there is a blank black area about an inch-and-a-half wide on each side of my screen. How do I reset this and what is the origin of this problem? (It's not merely a font issue.) Many thanks for any help.

ednurse
 

A:Icons Huge, Text Won't Fit On Page

8 more replies
Answer Match 46.2%

Basicly a friend of mine is making themselves their own little database for their finances. heres the problem. He wants the database to disply the current price of gold as found on this site: http://www.gold.org/value/spotprice.html and save it into a table automaticly.

This has caused problems.

Ive so far managed to get it to work in excel using a web query but have failed to do the same in MS Access.

Any ideas how i could do it?

Thanks
 

More replies
Answer Match 46.2%

When I open FF support page it doesn't show text, only some graphics. If I type in the search box nothing shows, but if I hit enter the only things that show are the tag words that I entered. If I find tools,add-ons, 'update plug-ins' I don't get any buttons to select in the update page. However, if I 'Print Preview' all the info is shown. I've tried Firefox, IE and Chrome browsers. they all show the same. At this point I am not able to get any help from Firefox. This seems like it may be a Vista problem?
I have an XP that works fine.
 

A:Firefox support page no text

bump
 

2 more replies
Answer Match 45.78%

Ok, my issue here is some programs (like, 3 in my entire time using my pc) their windows are cropped (see below) meaning you cant see things that are outside the window space, so to speak...

Here is a pic:



the red circles are the buttons i cant see properly due to this issue...

heres a link to the actual image...

http://img167.imageshack.us/img167/9288/helpsm6.jpg
i tried resizing the window, but i cant. i dont get the option to... Any ideas?

A:Cropped Windows......

hey, anything at all???

9 more replies
Answer Match 45.78%

Some web pages do not display the text properly . Only 1/2 characters per line . see the example below:
 
Example.  >>>
 
   2x
   3x
   Rep
   lace
   me
   nt
   batt
   ery
   For
   Nok
   ia
   BL-
   5C
   5B
   N80
   N90
   530
   0
   550
   0
   Lumia

A:Web page doesnt show the text properly

What browser? IE, Chrome, Firefox?

13 more replies
Answer Match 45.78%

As you normally type in Word, the cursor eventually ends up down the bottom of the page, and your screen. As much as I search the help menu I can't find out how to keep my text in the centre of the screen as I type, so that I don't end up down the bottom of the page. Can you help. I'm sure the answer is simple! - Bruce
 

A:Word 2002 - centering text on page

8 more replies
Answer Match 45.78%

I just reinstalled Windows XP and for some reason the way the texts on the web pages are displayed is different (in both IE and Firefox). Now, the texts are noticably thinner than before which makes it hard to read and irritates my eyes. I tried adjusting the text size and encoding but it can only enlarge the size of the characters - I only want the texts to be the same size but thicker. I also tried adjusting the dpi setting on Control Panel but it only changes the texts on menu bar but not the ones in the web page.
Is there anyway to fix this?

A:Adjust text display on browser page?

For you Firefox browser to make the text larger and thicker hold down the ALT button and turn the scroll wheel on your mouse toward you at the same time.
To make it smaller do the oposite.

3 more replies
Answer Match 45.78%

I am using Publisher 2003. I am modifying a Publisher supplied webpage template and have changed the top of my home page (the company name) and would like it to be the same on each page.

I would think there would be a way to make the "header" uniform throughout the whole site but I am just not seeing it.

I Frontpage, I know I can "Apply" it to all pages in a template, is this an option in Publisher?

Can anyone out there in webpage land help?

I appreciate any help up front!
 

More replies
Answer Match 45.78%
A:After updates, I have a black page and white text.

please tell us more about the issue, the device you are facing on, and about he updates that you have installed recently because we cant help you with half information.
If you need additional help or want to reply to this thread , learn how to join windows central.

0 more replies
Answer Match 45.78%

Hello

I have been having this (relatively minor) problem for quite some time now. What happens is, that occasionally, the text cursor does not appear in the password boxes on the XP home page. This means that I can not log on to any account with a password, while the problem persists. There are only two ways I have discovered to stop the problem from persisting.

(A) I log on and off of an account without a password (temporary fix that does not always work.)
(B) I restart the computer (again temporary, but surefire)
(While one would assume this means (B) is the better option, it is not necessarily, it means that I am unable to save anything that may be open on any passworded accounts.)

Obviously I am using Windows XP.

I have had this problem since I have used this computer (It was someone else's before, so I can not get an accurate "medical history.")

Any help would be greatly appreciated.

CultistO

A:Missing Text Cursor On The Xp Home Page

I had this problem about a year ago. It was intermittent but when it happened I also had to reboot to get it back, then I found that if I pressed CTR-ALTor maybe it was Control (I can't remember for sure) a box appeared asking if I had forgotten my passport this box would accept it and I could then sign in without the reboot. I tried several times to get advice on how to fix this without luck.

I persevered with it for a while then while following a tutorial on something completely unrelated I found that in Control Panel-Sounds and Audio- Sounds, I had less entries listed in my account than my daughter(who shares this PC with me had in hers). I had previously noticed that certain sounds ie that rustling sound you get when you empty your Recycle bin had disappeared. Anyway to cut a long story short I posted the problem on a couple of sites and got a reply from a guy at AumHa Forums who walked me through how to delete my sounds and copy and import my daughters. This solved that problem for me and also since then I have never had a vanishing sign in cursor either. I don't know enough about PC's to know how they were related but it solved the problem for me.

Not sure if this is any help but it won't do any harm to have a look.

I

1 more replies
Answer Match 45.78%

how do i put text onto this picture in the screenshot but i dont want any text boxes on it well i dont know how to make text boxes and also how do i make a colum on the left for links and stuff (i am making all boxes and graphics on photoshop)
 

More replies
Answer Match 45.78%

Can you tell me an easy way to save text from an internet page to a file on my computer. Control "S" doesn't seem to work.
 

A:Saving text or images from internet page.

for windows you select the text, hit Ctrl C to copy then paste it into your word processor.
 

2 more replies
Answer Match 45.78%

What do I do when all the page tabs below my work are missing. I can't find how to get them back. It is impossible to edit my work when I can't flow extra text to the next page. Any help will be much appreciated. lilart
 

A:Page tabs missing for text flow

To paraphrase JohnWill a bit, we would like to help you but we are not clairvoyant. Kind of hard to try to provide a solution if we don't even know what program you are talking about.
 

2 more replies
Answer Match 45.78%

While browsing the web and loading a web page, my screen suddenly went to a blank white page with random text written all over it, this did not last very long at all (one second max, probably less), then proceeded to load my destination page without any more problems.  I could not read what the text said, as it happened too quick.
 
Just wondering if anyone has experienced this before, and what it might be.  I'm almost certain this was just a connection related glitch of some sort, but I wanted to see if anyone here suspects anything malicious.  (Anti virus hasn't detected anything).
 
Thanks!

A:Quick flash of text before page loads?

Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2. SecurityCheck may produce some false warning(s), so leave the results reading to me.NOTE 3. If you receive UNSUPPORTED OPERATING SYSTEM! ABORTED! message restart computer and Security Check should run Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware to your desktop.NOTE. If you already have MBAM 2.0 installed scroll down.Double-click mbam-se... Read more

6 more replies
Answer Match 45.78%

Since we had a screen problem and my husband "tinkered" with settings, web pages are viewed "oddly" - plain white background, overlapping text etc. Changing font size does nothing and I confess I don't know enough to be able to find the problem here. Please help!
 

More replies
Answer Match 45.78%

ok...should the new tab page have white day-glo text like that after last night's update? or is it an issue with the browser?

see screenshot please. should be obvious, to the left of the redacted email address. that black block at the top, left of that.

More replies
Answer Match 45.78%

I had reviewed the postings regarding text and icons overlapping on webpages but still have not found a resolution. My system information is below and I am using Firefox 6.0.2 with No Script as the only add-on. Giving temporary permissions to all individual scripts did not resolve the issue. This link is an example of the website that is affected, those with text and link icons. http://www.t-mobile.com/default.aspx?WT.srch=1&WT.mc_id=241m1&WT.z=p129561593 Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X4 645 Processor, AMD64 Family 16 Model 5 Stepping 3 Processor Count: 4 RAM: 5887 Mb Graphics Card: ATI Radeon HD 4200 , 256 Mb Hard Drives: C: Total - 942338 MB, Free - 899198 MB; D: Total - 11427 MB, Free - 1075 MB; K: Total - 238472 MB, Free - 238374 MB; Motherboard: FOXCONN, 2AB1 , 1.00, Antivirus: Norton 360, Updated and Enabled SyncMaster 245B/245BW/245B Plus Analog (currently at 1920x1200 resolution. Lowered it with no improvement after reopening Firefox. Would appreciate any help. Have tried the adjustment of resolution, updating the driver, the &quot;+&quot; and &quot;-&quot; with control and the mouse to adjust font size as had been previously offered in prior discussions. Thank you.
 

More replies
Answer Match 45.36%

Hi guys this is a hard one.
I have a laptop sony vaio vgn-ns100e Win 7 64
This is my problem when i turn brightness down in PC brightness goes up and when i turn it up the screen starts to dim until screen gets comply black.
Also there is a black area in at the right of the screen.
On the bottom i see the upper part of the screen.

Now this is what i have done so far.
1.Test video card with Video Memory stress Test v1.7.
2.cheeked original drives & also DRPSu11.8.
3.Got a new inverter.
4.cheeked lcd cable on motherboard & screen.

observations
1.vaio logo is not visible wile boot.
2.connected to monitor, works fine.
3.Tried booting trinity rescue kit, black screen.
other ideas?
Thanks
Here are some pics of what I mean.

A:cropped screen, brightness

Any other ideas?

4 more replies
Answer Match 45.36%

Hi ,

I ve just completed a self build as follows

AMD Athlon(tm) 64 Processor 3000+
ASUS A8N-SLI DELUXE Main Board
NVIDIA GeForce 6200 TurboCache Video Adaptor
1GB DDR-SDRAM
Maxtor 6Y120L0 (114GB) H/D

Everything works well for my needs except that the screen image in a couple of utilities are for-shortened or narrowed so that words and functions are chopped off --making them unusable.
Can someone advise me what may be causing this and give some advice as to a cure.
Thanks

(How do I get a screen capture into this message so that I can better explain the problem if need be?)
 

A:Cropped screen images

Press print screen when the appropriot screen is up then paste it into paint and save it.

Then when you post a message click on the "manage attatchments" button at the bottem of the page and the rest is easy.

I belive the 'insert image' button at the top only works for images online and not on your own pc.
 

1 more replies
Answer Match 45.36%

I emailed myself an image from another computer which I had cropped. I saved the image on this computer, and as I looked at the thumbnail in my Zune program, the cropped areas were revealed displaying the original image. Also, in The GIMP, the cropped areas were revealed in the preview box. I decided I want to have the original, uncropped image back.

Is there a way to do this?

Obviously the information is still present somewhere in the image file, because it would not be able to reveal those areas in thumbnails, but how would one go about retrieving that information?

Any help would be great.
 

A:Restore Cropped Image

You may need to supply more details, such as what program you used to crop the image.

In general the cropped data is lost (even though the thumbnail may not have updated to show this) but in some programs (such as Picasa) the origninal image data is retained, at least on the original computer
 

1 more replies
Answer Match 45.36%

So recently, I received a blue screen of death. The error was something along the lines of:
page_fault_in_nonpaged_area

When it restarted, windows advised me to perform a system file check. So I left my computer for a bit, and when I came back it was already at the logon screen. However, when I logged on and started firefox, first thing I noticed was that all my bookmarks and some extensions had been wiped.
I then tried to start Microsoft Word but I received the following error:

&quot;The application has failed to start because its side-by-side configuration is incorrect&quot;;

I receive that error for most of my other programs.

When I tried to run event viewer, it says:

&quot;MMC could not create the snap-in&quot;

Please help. Is it possible to restore my applications without reinstalling them all?

Sysinfo Log:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3066 Mb
Graphics Card: ATI Mobility Radeon HD 3650 , 512 Mb
Hard Drives: C: Total - 289804 MB, Free - 64740 MB; D: Total - 15359 MB, Free - 9693 MB;
Motherboard: Dell Inc., 0F237N, A09, .2WZ222S.CN4864395K0725.
Antivirus: Microsoft Security Essentials, Updated and Enabled

EDIT: I ran SCF again. It said it detected corrupted files but when I restarted my computer, I am still unable to run most of my applica... Read more

A:Side-by-side configuration incorrect - application errors after System File Check

8 more replies
Answer Match 45.36%

I have a spreadsheet that has nine columns. Once of these columns (the fourth column) is used for a single character as a method of immediately letting the user know that the row in particular is different to the others. So, there's nothing different about that at all.

What I'd like to be able to do, though, is to have the other eight columns (the three columns before the column mentioned above and the five after) all change their background colour when the single character is entered in the fourth column.

So, if the user inputs data in a new row and leaves the fourth column cell blank, nothing happens. If the user enters the symbol (let's say it's a "#"), then the nine columns will all change their background colour to red.

If anyone can help me with this, I'd greatly appreciate it.
 

A:Solved: Formatting Side-By-Side Cells Dependant On Single Cell Value?

6 more replies
Answer Match 45.36%

So, I had the same problem as above. I had developed a dll using Qt that worked fine on my machine but would not register on another. The familiar "This application has failed to start because the application configuration is incorrect..." appears when I ran the depencency walker on the dll.

So this was the solution that worked for me, which may help some others see what's going wrong here:

Within my dll the manifest emedded read:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0">
<dependency>
<dependentAssembly>
<assemblyIdentity type="win32" name="Microsoft.VC80.DebugCRT" version="8.0.50608.0" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity>
</dependentAssembly>
</dependency>
</assembly>

It seemed that the assembly definition was not found upon my client computer. So then, from within my original computer's 'Windows\WinSxS' directory, I copied the 'x86_Microsoft.VC80.DebugCRT_1f...' directory and it's associated files within the 'Policies' and 'Manifests' directories onto the client computer. Once copied, the dll registrered fine.

Hope this helps...
 

A:Solved: application has failed to start as side by side configuration is incorrect

As above where?
 

1 more replies
Answer Match 45.36%

i cant open my windows live movie maker due to Side by Side configuration error. Can anyone help me?

A:Windows Live movie Maker Side by Side configuration error

Isn't that a Win 7 app?

1 more replies
Answer Match 45.36%

I have an Inspiron 5545 running win10.
On opening, the right side hinge on the keyboard section pulled three screws and inserts free, cracked the plastic in the corner where the hinge is located, killed the WiFi, and caused an intermittent vertical line to appear on the screen.
The laptop has never been out of  the house, never dropped, and seldom left my lap when I was home.
It runs, but is held together with aa 1.5" black paper clamp and connects to the home network via a USB WiFi dongle from Wal-Mart..
This is my fourth or fifth laptop and the first to have the case fail.  This is a design failure in my opinion.  Boo on you, Dell.  I've bought a lot of your computers over the years because they worked and did not fall apart with normal use.  This one disappoints.
Rev. William J McVay, D.D.

More replies
Answer Match 45.36%

Problem: I'm trying to retrieve a client-side <form> element value into a server-side variable. The code works if I explicitly set strCCLastNameValue = (a data value in the db table column "care_Contact_Last_Name" such as "Jones"). I hope I have explained the situation adequately. Thanks for any suggestions on resolving this issue.
Here's the code in an asp file...
============================
<script language="VBScript">
Sub prepop()
<%
Dim dbConn, oRS, sSQL, strCCLastNameValue
strCCLastNameValue = document.getElementById("careContactLastName").value 'THIS IS THE LINE THAT IS GIVING ME PROBLEMS
Set dbConn = Server.CreateObject("ADODB.Connection")
dbConn.Open "Provider=SQLOLEDB;Server=MYServerurl;Database=wpgXXXXX;NetworkLibrary=DBMSSOCN;UID=XXXXX;PWD=YYYYYYYY"
Set oRS = Server.CreateObject("ADODB.Recordset")
oRS.CursorLocation = 3 'adUseClient
With oRS
.ActiveConnection = dbConn
.Source = "SELECT * FROM CareMinistry WHERE care_Contact_Last_Name= '" & strCCLastNameValue & "'"
.CursorType = 0
.LockType = 3
.CursorLocation = 3
.Open
End With
oRS.MoveFirst
%>
'Then fill the <form> with the selected row.
document.addform.entryStatus.value = "<%= oRS("entry_Status") %>"
document.addform.entryCategory.value = "<%= oRS("entry_Category") %>"
document.addform.entryDate.value ... Read more

A:Solved: problem setting server-side variable from client-side sub

6 more replies
Answer Match 45.36%

all instructions can be found here at
http://www.howtogeek.com/howto/17342/upgrade-office-2003-to-2010-on-xp-or-run-them-side-by-side/

 

More replies
Answer Match 45.36%

I am trying to fix my friends computer which is having several weird issues. When you login everything appears to be normal but Windows loads to a black screen with a cursor. Ctrl + Alt + Del to task manager and I can run explorer.exe to restore the desktop. However the problem now is once your at the desktop all programs when you try to run them pop up with an application failed to run side-by-side configuration is incorrect. these problems are not apparent when the computer is ran in safe mode, but I can not figure out what to do. I checked the registry HKLM software windows nt logon and explorer.exe is the value.
Malwarebytes when ran in safe mode does not detect anything either.

A:windows logs in to a black screen, programs have side by side config

Some possibilities: this application failed to start because side-by-side-configuration is incorrect

Was this computer upgraded from Vista to Windows 7? If so that may be the cause. You can try doing a Repair Install of Windows 7 to see if that corrects the problem.

3 more replies
Answer Match 45.36%

First post...

I am coming to you as a last resort. I built my own PC and installed Vista Ultimate 64 bit OEM edition. Has been working fine for ~2 years.
Now every time I attempt to open a program I get the error "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail".

The only progam that is barely working is IE 64 bit edition. I cannot download or run any files.

Microsoft wants 59$ to speak to a technical support representative(What a joke, multibillion dollar company wants extra $ for tech support??...).

Doing a ton of research I have tried various things to remedy this with no avail. System restore did not work. Doing a sfc /scannow in command prompt does not work, it does not even run. Wasted 3 hours of my life doing a thorough checkdisk as well.

The error in the event log is as follows...
Error in manifest or policy file "C:\Windows\WinSxS\manifests\x86_microsoft.windows.c..-controls.resources_6595b64144ccf1df_6.0.6001.18000_en-us_72e6f33f34dfabb9.manifest" on line 18. Invalid Xml syntax.

So the problem has to do with this manifest file? I really am clueless as to my next move. I can not download and run anything at all.... Can I do a Vista repair installation with my OEM version?

Should I try and get my hands on a cheap upgrade version of Windows 7?

A:Vista x64: Side by side configuration error, no programs work halp :(

Welcome
Until our Forum expert in this area, Niemiro, comes on line, maybe this will give you a lead.
side by side configuration

16 more replies
Answer Match 45.36%

Hi all,
I wounder if some can help me please
I have an error message coming up on all 32bit application that says “the application has failed to start because its side-by-side configuration is incorrect.”
I have done a lot of searching and found that most say I have to uninstall Visual C++ then load an update from Microsoft. That’s great but the side by side error won’t let me uninstall or install anything
I ran sfc /scannow and it found some error and did not fix others The log is below
I hope someone can help
Code:
CBS log
2013-03-28 16:10:08, Info CBS Starting TrustedInstaller initialization.
2013-03-28 16:10:08, Info CBS Loaded Servicing Stack v6.1.7601.17592 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\cbscore.dll
2013-03-28 16:10:10, Info CSI [email protected]/3/28:05:10:10.05 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee84ef0ad @0x7fee87a9849 @0x7fee87734e3 @0xff32e97c @0xff32d799 @0xff32db2f)
2013-03-28 16:10:10, Info CSI [email protected]/3/28:05:10:10.07 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee84ef0ad @0x7fee87f6816 @0x7fee87c2aac @0x7fee87735b9 @0xff32e97c @0xff32d799)
2013-03-28 16:10:10, Info CSI [email protected]/3/28:05:10:10.07 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee84ef0ad @0x7fef5478738 @0x7fef5478866 @0xff32e... Read more

A:Side by side error stopping all 32bit apps and many window's fucctions

Hi scott and Welcome to Seven Forums.

Did you try to boot into safe mode? Or even better a system restore?

6 more replies
Answer Match 45.36%

Recently, and only every now and then, my Comcast web (home) page is rendered/presented entirely as text, rather than its more palatable graphics form. This doesn't happen all of the time, just periodically. I suspect that I may have one or more of the Firefox Option settings set incorrectly. Any suggestions?

Thanks to any/all in the community for your direction.

Lairbear
Randy Reist

A:Firefox: Web Page Rendered as Text versus graphics

Hi ... Read the Links below might be of some Help ...
https://support.mozilla.org/en-US/questions/991654

https://support.mozilla.org/en-US/questions/1031537

2 more replies
Answer Match 45.36%

Hi Team,
When I double clicked ESC on any of the editable text boxes, it clears the complete web page. It happens only IE only.

Is it IE issue? Any workaround to resolve the  same?
Thanks, Neel.

Kind Regards, Neel.

More replies
Answer Match 45.36%

Hello

Another blue screen, again

I was typing a text on a web page commentary box and PC went blue, froze then restart.

Any idea???
Any help appreciated.

Martin
DM document annexed

A:Blue screen... again while writing a text on a web page. Any idea

Hi arjfca.

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Dont run any disc cleanup tool before you upload another zip.

6 more replies
Answer Match 45.36%

Using Office 2003 on XP SP3 machine with lots of resources.
Lately, occasionally I will print a page which will in the case of Word, print a watermark and footer, but no text. With Excel it is the grid which prints, but not the text in the grid. Copying from excel to word will give the same results. No error messages.

In the Excel case, other sheets in the same workbook print fine. A pdf made from the Excel sheet, prints fine.

Reinstalled office after uninstalling it, no difference.

Updated the printer (officejet 7780 all in one) drivers, no change. Note this printer has been installed and has worked fine for several years.

I'm guessing that somethng is corrupted in a given sheet that doesn't print properly??? Has anyone seen/cured this problem?

An additional annoyance I have is that the cursor occasionally disappears from where it is in a document if there is no active typing. It requires a mouse click on the appropriate spot to bring it back. Problem appeared about 6 months ago and is still here. Anyone?

Thanks for your help!
Rgds Rustywatter
 

More replies
Answer Match 45.36%

Hello please can someone help - this is driving us all mad! On one of our PC's running Word 2003, whenever we try and type a new document - it looks fine on the screen, but when you print, or do print preview, it spaces the text out so that it fills the whole screen creating huges gaps in the text. We have checked everything - page setup, line spacing etc and have even uninstalled and re-installed both Office and the printer. We can however open and print existing documents without a problem! How can we fix this???? Thanks
 

More replies
Answer Match 44.94%

"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail."

First of all, I've gotten this on at least 3 different programs. Everyone who's written about this seems to think it's related to their specific program...it's not! Secondly, what I find here in the forum on the subject tells me there has been no solution...also am unable to find any on the 'net'. I think it acts like a virus and is spreading...

What's up with this??? Does anyone know...? It has kept me from opening iTunes so I can't work with my iPad anymore. Certainly there must be someone knowledgeable enough to know what this is and what to do about it...right?:

 

More replies
Answer Match 44.94%

Ok so I am going to go straight into the good stuff.

Essentially I launch Dragon Age and get an error about side by side configuration. I have already done an enormous amount of research on this subject and have found that the problem is usually attributed to the C++ Redistributable from Microsoft.

I tried to remedy this problem 3 different ways (manually working from a system restore point where Dragon Age & Bioshock 2 did not work, but Mass Effect 2, Call of Duty MW2, and the Original Bioshock were still fully functional) this system restore point had the Microsoft 2008 C++ Redistributable installed, and again the games I listed in parenthesis were working fine.

I first uninstalled the 2008 Redistributable and downloaded and installed the 2005 Redistributable, restarted the computer (even though it did not prompt me) and ran into a massive error. Essentially, this install made every game unplayable (all of those I listed above).

Next, I uninstalled the 2005 Redistributable and reinstalled the 2008 without a restart, and tried to launch every game listed above. Of course, I was back to square one, with Dragon Age and Bioshock 2 still giving me the side by side configuration error.

Lastly I tried launching each game through the program 'depends.exe' (using the .exe) to see exactly which dependencies each game required. Of course, both Dragon Age and Bioshock 2 gave me the side by side configuration, telling me that a MSVCP80.dll file could not be found with... Read more

A:Side by Side Configuration Error (Attempted several 'easy' fixes already)

This error is by no means fixed, however I thought that I would post in some detailed error information from my event viewer (please read the first post, however, as my problem is unique):

Activation context generation failed for "C:\Program Files\Dragon Age\bin_ship\daorigins.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.

Activation context generation failed for "c:\program files\2k games\bioshock 2\sp\builds\binaries\BIOSHOCK2.EXE". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.
 

1 more replies
Answer Match 44.94%

So my issue is that when I log into my computer it will some times (not all the time) revert from a side by side multi monitor setup to a over under setup. Like if you go into screen resolution settings I will have it set to monitor 1 on the left, and monitor 2 on the right, then when I lock the computer and then log back in, it will have monitor 1 positioned over the top of monitor 2.

I'm thinking there is possibly a default that it keeps going back to, but I'm not sure where I would look for that, other than the screen resolution settings. Another possibility for the origin of this problem could be Microsoft User Experience Virtualization Agent, which we have installed on all our computers here to synchronize the various setting we have connected to our profiles. It looks like UEV might synchronize monitor layout settings, and with that it could be some how defaulting on an over under set up. Overall I am unsure of what to do about his.

Any one have any ideas?

More replies
Answer Match 44.94%

So my issue is that when I log into my computer it will some times (not all the time) revert from a side by side multi monitor setup to a over under setup. Like if you go into screen resolution settings I will have it set to monitor 1 on the left, and
monitor 2 on the right, then when I lock the computer and then log back in, it will have monitor 1 positioned over the top of monitor 2. 

I'm thinking there is possibly a default that it keeps going back to, but I'm not sure where I would look for that, other than the screen resolution settings. Another possibility for the origin of this problem could be Microsoft User Experience Virtualization
Agent, which we have installed on all our computers here to synchronize the various setting we have connected to our profiles. It looks like UEV might synchronize monitor layout settings, and with that it could be some how defaulting on an over under set up.
Overall I am unsure of what to do about his. 

More replies
Answer Match 44.94%

i hate vista. but I gotta work on them cause they break.
I have a laptop handed off that is "stuck" in terms of the way it displays the file system [Windows Explorer].
How do I get this thing to display the side-by-side hierarchical view? you know... computer, drives, top level on the left pane, and the drill-down in the right pane???????

aarrrrgggghhhhh
 

A:? Vista Windows Explorer in side-by-side panes like good OS's??!!

The tree view is to the bottom left of the file view, below the favorites.
 

2 more replies
Answer Match 44.94%

Suddenly out of the blue nothing opens - Am not a programmer and don't understand all this lingo have 4 0r 5 redistributible programs C++ 2005, 2008 etc with all relevant service packs - NO LUCK - this is killing me am looking for work and can't get to my resume can't open any programs at all - adobe, microsoft office NOTHING please tell me how to restore my system files to default and start over
 

More replies
Answer Match 44.94%

I have extensively searched these forums for a solution to my problem but can't find it. I have found some similar problems, but none exactly the same, here is what happened:

I have a Windows7 computer running just fine. I pulled the hard drive out of my old computer and had installed it in the new one and it seems fine. I can access both drives and i all my files are there. The problem i am having is that i can't open any files from my old hard drive if the program they need to open is also on that old hard drive.

For example, my old hard drive has AutoCAD on it, my new hard drive doesn't. When i click on AutoCad i get the annoying "The application has failed to start because its side-by-side configuration is incorrect" message. This happens with lots of programs, not just AutoCAD. I have MS Office on the old hard drive but when I try to open a word or excel file it won't open. It's like the computer is trying to open files from my old hard drive with applications that are on my new drive. This is a problem because i cant afford to buy 2 copies of autoCAD and 2 copies of MS Office and 2 copies of every program i have.

I feel like there is a simple fix for this but i can't figure this one out.
Thank you for help!!!!

A:Installed 2nd hard drive....side-by-side configuration incorrect

Hi welcome to the forum.

to my knowledge you will need to reinstall the programs as you cant use programs that are installed on the hard drive from another computer as it will have writen registry items when the program was installed.

i'm sure someone will correct me if i am wrong.

6 more replies
Answer Match 44.94%

I just came home from work and there was a power failiure while I was working. I turned my computer back on and went to open Google Chrome, but this message appeared...

"The application has failed to start because its side by side configuration is incorrect. Please see the application event log for more detail."

I have no clue what this means or what to do. I'm using safari at the moment and went on google and all the instructions look really confusing. I know VERY little about computers and the terms and what not. So any help would be greatly appreciated.

Thanks,

A:Help! Cant Open Google Chrome. Side by Side Configuration Is Incorrect.

If this "repair" does not work I would try a restore point if you have a recent one.

Message: The application has failed to start because its side-by-side configuration is incorrect. | Chief Architect Knowledge Base

Basically for Vista it is open Programs and Features from Control Panel, scroll to chrome and click Repair.

1 more replies
Answer Match 44.94%

On quite a few different programs, i'm getting the error message:

"The application has failed to start because its side by side configuration is incorrect. Please see the application event log or use the command line sxstrace.exe tool for more detail"

I've read so many forums online where people have had a similar issue, but nothing has been helpful. The most common suggestion is related to VisualC++ but when i installed it, I got the same error! I tried running it without saving, then I saved it and tried running it, again the same error.

I've opened the event viewer, theres quite a few 'sidebyside' error messages, but I dont know what to do with any of that information. The first side by side error is this one:

Microsoft.Windows.Common-Controls,language="&#x2a;",processorArchitecture="X86",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0"
C:\Program Files (x86)\Microsoft Silverlight\4.0.50524.0\Silverlight.Configuration.exe

I havn't a clue how it started, my computer was fine yesterday, I opened it today to these errors, I tried rebooting but it didnt help.

If any more information is needed, I'll provide what I can.
Thanks

A:side-by-side configuration is incorrect error on multiple programs?

Follow the instructions here http://support.microsoft.com/kb/929135 to install VisualC++

3 more replies
Answer Match 44.94%

Is there such a program that will force any video or video game(executable) to display in SBS image? I would like to use this program to play video games from my pc on my GearVR unit. I feel like this shouldnt be too hard to do overall. I know apps like this exist for mobile. I want something like this for my pc. Please help, I beg of you.

More replies
Answer Match 44.94%

I can't install or uninstall any software.
Most of the installed software are not working.
The default windows apps are working and few of the installed games are working (Witcher 3 - don't know how) .
Tried to reinstall Visual C++ Redistro but not working as none of exe files are opening with side by side config issue.

A:Side by side configuration issue since Windows 10 Update on 09 Aug 2016

Originally Posted by Windows Central Question I can't install or uninstall any software.
Most of the installed software are not working.
The default windows apps are working and few of the installed games are working (Witcher 3 - don't know how) .
Tried to reinstall Visual C++ Redistro but not working as none of exe files are opening with side by side config issue. can you perform a sfc scan?
And check that there aren't any pending OS updates and app updates
If you need additional help or have more questions or details to share, please join the site so you can reply in this thread. See this link for instructions on how to join Windows Central.

1 more replies
Answer Match 44.94%

I get this message whenever i try to start ay program in the Microsoft office and with trillian. I have tried re installing office but have not had any success in getting the program to run. Is there anything i can do to get these programs running again?

 error.png   152.54KB
  10 downloads

Thanks,
Ryan

A:the application failed to start because its side-by-side configuration is incorrect

I saw that message in Office 2010 when I had it over more than one drive, program on C, files on E it went badly. ended up uninstalling an re-installing on just C:// and never had the issue again

4 more replies
Answer Match 44.94%

Hey Guys,
I have a problem.   Last night, i was up all night, using my pc. I had quite a few tabs open (using chrome), and every once in a while, the cpu had a lot of Work to do, so the pc would respond more slow. During one of these slows, something different happened. Quite a lot of icons just turned into one of the old school Windows icons, most (if not all) of them being .exe files. I wanted to fix all of this, so I used Bullguard, and after that i wanted to use CCleaner. CCleaner didn't Work. Neither did the other programs. They gave me an error in the lines of:

"This version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) verion of the program."

Also, whenever i shut down my computer, or boot it up, an error pops up from LogonUI.exe:

"Error: C:\program files\common files\microsoft shared\windows live\wlidcredprov.dll is either not designed to run on windows or it contains an error"

I figured out how to fix this part. I simply installed Windows Live Essentials.
 
And when I open Google Chrome, it just gives me another error. It says that the side by side configuration is incorrect.
I tried uninstalling MyWinlocker but, it is still running in the system tray. I tried looking for a process called mwl.exe, but I can't find it.
 
Also, whenever the computer boots up, I am also greeted with a certain window. It's the window th... Read more

A:Bunch of errors - side by side configuration, version compatibility, etc.

Please run System File Checker
 
The sfc /scannow command scans all protected system files and replaces corrupted and incorrect versions with correct Microsoft versions.
 
Click on the Start orb and then type cmd in the Search programs and files box.
 
In the pane above the search box Programs will appear with cmd below it, right click on cmd and choose Run as administrator.
 
If you are prompted for an administrator password or for a confirmation, enter the password, or click Allow.
 
This will open the Elevated Command Prompt, it will look similar to the image below.
 

 
Type in sfc /scannow and then press Enter to start the scan.  Please notice the space between sfc and the /scannow.
 
If the scan finds no integrity  problems the scan will stop.  Type in exit, then press Enter to stop the scan.
 
When the scan is finished please post the log of this scan.
 
To find sfc /scannow log, type cmd in the Search programs and files box. 
 
cmd will appear above the search box under Apps., right click on it and choose Run as administrator, this will open the Elevated Command Prompt.  This will look simlar to the image above.
 
Copy and paste the following in the Elevated Command Prompt, then press Enter.  
 
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt
 
This will place a new icon on the desktop titled sfcdetails.  Double click on this ic... Read more

13 more replies
Answer Match 44.94%

How can I open 2 excel files side by side in Office 2010?

A:How to open 2 excel files side by side in Office 2010?

See if this helps: Comparing Two Excel 2010 Worksheets Side by Side - For Dummies

1 more replies