Tech Problem Aggregator

ViewSonic Monitor Drivers

Q: ViewSonic Monitor Drivers

I recently downloaded the latest drivers from ViewSonic's page and isntalled them, and upon rebooting I had weird resolutions listed. Missing are 1024x768, 1280x1024, and 1600x1200. Instead I have ones like 1280x720, 1280x768, 1280x960, 1360x768, 1600x900, and 1600x1024. I Desperatly need my non-distorted resolutions back!! I have tried uninstalling the drivers and the device. I have also tried to just change to a Generic driver but the resolutions are the same. HELP!!!!
Monitor : ViewSonic A90f+ UltraBrite

A: ViewSonic Monitor Drivers

10 more replies
Answer Match 80.64%

I am running Vista Home Prem.I use an 8800 GTS EVGA.I have the latest drivers for my 8800. I run 2 Viewsonic monitors. One is a VG900b and is fine. I also run a VX2235 digital monitor. Both monitors are listed in device manager by model. I manually installed drivers directly off of the discs.I have also downloaded Viewsonic's monitor drivers. I can't get my 22" to go to it's native resolution of 1680x1050.I have had these installed for a long time and working fine. When I ran a hard disc error check that is listed under tools under properties of my computer it erased my 22" and it's capabilities to operate @ native resolution. Another difference is that before I manually installed the VX2235, it was listed as a 'non plug and play monitor' under device manager. I have never seen that before. Does anyone know how to fix this? I am this close to going out and buying a new XP Pro disc.
 

A:Viewsonic monitor drivers?

Why not just uninstall the monitor drivers you installed and reboot and use the Vista drivers?

Start there.
 

2 more replies
Answer Match 62.16%

Greetings all,

My ViewSonic VX2450wm-LED monitor is recognized as Generic Non-PnP Monitor. I even downloaded and attempted to install Viewsonic's "Standard_Monitor_Driver_Signed_Win7_x64". It times out at the end of installation and requests I download "Standard_Monitor_Driver_Signed" from Viewsonic website.

My display view is set at max res of 1600x1200. I am running Win7-Ultimate 64bit.

Is there any other way to get Win 7-Ultimate 64bit to recognize the monitor as VX? Any help would be greatly appreciated. I am using an NVIDIA GeForce 9300M GS 256MB card.

Thank you

A:ViewSonic VX2450wm-LED monitor is a Generic Non-PnP Monitor

If you need to know, here is how I fixed it.
First install ViewSonic's "Standard_Monitor_Driver_Signed_Win7_x64"
Go to Device Manager
Select Monitor drop down tab
Select Generic PnP Monitor
Right-Click on Generic PnP Monitor
Select option "Update Driver Software"
Select "Browse my computer for driver software"
Select "Let me pick from a list of device drivers on my computer"
Select from the models listed: Generic PnP Monitor
Select option "Have Disk..."
Select "Browse..."
Navigate to where the ViewSonic monitor drivers are stored
Example: C:\ViewSonic
Select monitor driver
Example: VX2450_SERIES
Click "Open"
Click "OK"
Select from the pop up window:
ViewSonic on the left and ViewSonic VX2450 Series on the right
Click "Finish"

Finally, you will receive the message: Windows has successfully updated your driver software.
Notice resolution is now 1680x1050

After successful install of Nvidia drivers for my laptop's "nvidia geforce 9300m gs" current version:

186.19 to new version: 260.99, the max res cannot be set to the following available resolutions:
1920x1200, 1920x1440 or 2048x1536

Enjoy!

1 more replies
Answer Match 60.9%

I run XP on a new box and a fairly new 19" (year old) View Sonic LCD monitor. The monitor worked as advertised on my old PC but when attached to my new one I frequently get a flashing green power indicator light and will get no picture.

This happens 100% of the time if I cold start the PC and I have to screw around with the restart button and on/off power button to get it to come back to life and in truth I do not know which combination of button pushing gets it to come back. I now use the power saver mode because that seems to be the most consistent way of bringing the monitor back to life but even that didn't work this am.

ViewSonic's web site wasn't much help.

Help here?
 

A:ViewSonic Monitor

9 more replies
Answer Match 60.9%

I'm trying to decide between the G90FB 19" or the P95F+B...
Here are the links:
G90FB
http://www.newegg.com/app/ViewProductDesc.asp?description=24-116-282&depa=1
P95F+B
http://www.newegg.com/app/ViewProductDesc.asp?description=24-116-232&depa=1

The only real difference between the 2 is the fact the Professional one (P95F+B) has an aperture grille while the Gaming (G90FB) has a shadow mask

I know the shadow mask uses dots (dot pitch) while the aperture grille uses lines instead of dots...

Which monitor will give me the best picture for gaming and crisp clear text.
 

A:Which is the better Viewsonic monitor?

If you can afford it I'd get the Professional version. I had Philips 107P (Professional) monitor with a .25 Aperture grille and it was the best monitor as far as picture quality/clairity I've ever seen (I'm sure there are better, but not without paying major money).
 

2 more replies
Answer Match 60.9%

Hello,
I was just wondering if I'm pretty much out of luck with my monitor or is it fixxable?
Whenever there is any spot for black its pretty much like the picture on the right in this link
http://spectacle.berkeley.edu/~fior...rtist_varia_topics/[email protected]@@@@@itaki_fade5.html
It makes watching things or playing games horrible.
 

A:ViewSonic Monitor

Your link doesn't work.
 

11 more replies
Answer Match 60.9%

About four months ago I bought a supposedly rebuilt Viewsonic P815. About one month after I hooked it up it started to not degause. The screen is pink.

Every once in a while it will correct itself and be fine for a day or two, then it goes pink again. I've replaced cords and plugs.

Any ideas?

Thanks.
 

A:Viewsonic monitor

6 more replies
Answer Match 60.06%

please help................my computer is quite old in computer years......about 6 or 7 years old.................i've never had any problems with it until now.....after recently moving and not having it set up for a few months i finally got it ready to use again......it was all running fine for about two days when i started having the monitor problem..........i have a viewsonic A90 screen..........the image on the screen will zoom towards the center and then the screen will turn black............if i turn it off and on it will just do the same thing and go black again......at one point it started working again for a few hours but that's it......i had the whole computer running off an high grade extention cord which i thought may have been the problem but i have moved it off the extention and i am still having the problem......i have fiddled with the cords etc and it didn't help..................please help me.....is the screen totally gonners????? this is very strange..........i've never seen a screen do this

greatful for any help........thanks
 

A:old viewsonic monitor problem

7 more replies
Answer Match 60.06%

My Viewsonic LCD monitor flashes on and off depending on what I am viewing. I can view pages in any program that has writing or a small number of small pictures without too much trouble. A web page with lots of pictures or the desktop and screen saver are the worst. The monitor flashes off so much on these last pages that I can barely see the page long enough to move the mouse and open a program or expand one from the start bar. I have checked cables, changed power cord, and checked video card drivers. Viewsonic website was no help. Anyone with any ideas?
 

A:Viewsonic LCD monitor trouble.........

Hi and welcome to TSG.

Do you happen to know if you are operating the monitor at or beyond its normal operating range for resolution and refresh rates?

Do you get a stable image if you start Windows with a lower resolution in Safe mode?

In the future, it would help us to help you if you give more details like the model number of the monitor and how it is connected to the computer. The TSG reporting utility program does not produce an exhaustive and detailed report about all of the hardware related to your computer.
 

1 more replies
Answer Match 60.06%

I just replaced a 1280x1024 Viewsonic monitor, that had gone bad, with another one (Viewsonic VA708).

Though I've never really been one to pay "hard hard" attention to how things look on a monitor - never felt a problem with anything - something just looks/feels "off" with this one.

This is most noticeable to me on the titles appearing on the browser tabs in Firefox. They just look "wrong" - watery maybe to my eye.

BUT... I have attached a screenshot comparing a blowup of a browser tab from my work computer Dell 1280x1024 monitor (top) and my new Viewsonic monitor (bottom), blown up to 1000 px wide (I cropped), and in the blowup, I can't tell the difference.

So why might I be perceiving things differently with this new monitor?

FWIW, I did update the driver from the Viewsonic site, and I also played with both the monitor's and the control panel's display adjustments.

More replies
Answer Match 60.06%

hello i am new here. my viewsonic VE710b lcd monitor is acting up. when i boot into ubuntu 7.10 the monitor blinks on and off for a minute before it stabilizes. this happens even during the loading of grub which only means that it has nothing to do with the OS. i tried with my other linux OS on another partition and the same thing happens. does this mean that its the end of the road for my trusty friend?!

 

A:viewsonic monitor on the fritz?

6 more replies
Answer Match 60.06%

I have a ViewSonic 19" CRT monitor (bought new in '99) connected to a PC that runs Win XP SP2, 512 MB RAM, Matrox Millenium AGP card.

The system ran fine until I moved it (carefully) to another room. The CPU boots but the monitor does not give any video. I get a black screen with a repetetive blue area that indicates no signal. The specific line entry is "No Synch". I think I may have seen this in the past, when the monitor was powered on but the CPU was shut off. I can't be certain it's the exact same condition.

I switched cables and tried a different video card but no luck. I don't have another monitor other than my laptop. I think I can hook it up to act as a monitor but not certain. Can't afford to crash the laptop.

Any suggestions?
 

A:No Synch w/ ViewSonic Monitor

8 more replies
Answer Match 60.06%

Asus VW266H ($375) vs Viewsonic VX2640W ($399)
Both 25.5 viewable

300 cd/m^2 vs 400 cd/m^2

Viewsonic does not have DVI
both have HDMI

Image Contrast Ratio
20000:1 (dynamic) vs 1000:1 / 4000:1 (dynamic)

Color Support
24-bit (16.7 million colors) vs Up to 16.2 million colors

Gray Response Time 2 ms vs 3 ms

Which one would you choose? Any other ideas?

A:New monitor Asus vs Viewsonic

Come on and give us a clue what you want to know.

9 more replies
Answer Match 60.06%

I have a Viewsonic VA721 monitor that I was using up until earlier today when the monitor started acting like a scrambled cable tv channel when turned on.

I was wondering if anyone might happen to know as to what might cause that, what the technical term for it might be and as to whether or not it can be fixed.

Up until today I have never had any problems with the monitor. Every time I would walk away from the computer for a while I would shut the monitor off so that I could avoid any burn in problems with it thereby preserving the life of the monitor. Because of that I have never had any problems with it until today and at the moment I do not know what could be causing the problem.

I tried the monitor on two different computers with two different cables and got the same result. I bought the monitor in 2006 brand new and up until today it has served me faithfully without any problems.

I don't know if it can be fixed or even if it is worth it nor do I know if it is something that I can fix myself or if I would have to have someone else fix it.

What I do know is if there is anything that I can do to fix the problem myself and restore it to active service then I might choose to give it a try.

Until I have more answers though I cannot make an informed decision about any of it and that is why I am asking.

I am hoping that there will be someone here that will know about such things and can give me some straight advice and information about the monitor and the pro... Read more

A:Viewsonic VA721 Monitor

9 more replies
Answer Match 60.06%

hello everyone.

I have a monitor viewsonic p220f that when I turn on, a thin blue horizontal line appears in the middle of the screen. Dont know if its broken or could be fixed or maybe video cable is broken.
Please advise
Thanks ahead of time for any help.
 

A:Viewsonic Monitor Problem

It sounds like the vertical deflection is gone. Try the monitor on a different computer or a different monitor on yours to see where the problem is. If the monitor is bad its better to bury a new one than to pay to have it repaired. New monitors are pretty cheap now.
 

1 more replies
Answer Match 60.06%

I have a four year old 19" viewsonic monitor-just recently its started shutting itself off for no apparent reason. If I press the power button it comes on again-for a while. Tried it on a different PC and same problem

Is this a known fault with monitors and is it likely to be worth repairing I wonder?
 

A:Viewsonic monitor turning itself off

10 more replies
Answer Match 60.06%

Ok, no laughing when you read this.....I just bought a new Dell 660 computer that has Windows 7 on it. I can't get my monitor to work on it. Ok, so don't laugh, but it has been a good monitor that was manufactured in 1997......Viewsonic E771.....you know the old, bulky thing. I told myself that I would not buy a new one until this one died. I'm on my third computer with this monitor. Can I get this thing to work with my new Dell?
 

A:Windows 7 and old Viewsonic Monitor

Wow, does that bring back memories. I use to have one It's time for you to treat yourself to another Viewsonic monitor that will enhance your new computer

http://www.newegg.com/Product/Product.aspx?Item=N82E16824116580
 

3 more replies
Answer Match 60.06%

My 2nd attempt to get some help off the forums

A few days ago, I tried loading up Warcraft 3, a game, and the screen went black, with the light flashing on and off. If I alt tabbed out of WC3 the screen turned back on. The problem persisted after a restarted, so I left it for a while. A few hours later I tried and W3 worked fine, no problems.

However today I turn on my PC and after a few seconds during the boot up, the screen goes blank with the flashing on and off light again. I restart it and it goes blank even faster.
After a while on the forums (on my GFs laptop) I try pressing F8 before the screen goes blank, and then press ESC for the 'default' Boot option. It goes on to boot up normally, with screen errors. I test out warcraft 3, (since when I first saw this it was whilst starting up this program) and it works fine, and goes on to do so for a few hours, till I turn the screen off and on to see if the problem is permanently fixed. It hasn't, the screen goes black.
Upon restarting my PC I get the same error as before, Pressing F8 and Esc doesn't fix it anymore. However now after pressing Esc I get to the screen where they ask me if I would like to Boot up in Safe mode. I do so and it loads up in safe mode fine.
Later on I try again to get it to load in normal mode, it does first time. Then upon loading Warcraft 3 again, the screen goes black again, with the flashing light. Again rebooting results in the same black screen a few seconds into loading... Read more

More replies
Answer Match 60.06%

I just bought 22" viewsonic vx2235 , but having problem in installing it,The maximum vmixel size is 1680x1050(wide view) but my properties doesnt show this pixel size.rather my pc pc shows only non wide view pixel .

I have installed the dirver as shown in user guide but still doest work.I have 2.8Ht and MSI chipset board, please tell me what may be the problem that i done have wide view pixels

Please Help!!
 

A:ViewSonic vx2235wm LCD monitor

What video card to you have? BTW I have the same monitor.
 

4 more replies
Answer Match 59.64%

Hi all;
For several months, I have been trying to diagnose a problem that occurs on my Viewsonic VX2000 monitor connected to a BFG 9800 GTX+ .

I had been running a BFG 6800 card with no problems at all, but wanted something faster on this aging system; Asus P5AD2-E Premium, and got a good deal on the 9800.
It worked great with the drivers included on the install CD. That driver was dated 10/2008.

When I installed the later driver, I started to see video noise lines running up and down both sides of the screen when in the max resolution of 1600 x 1200 @ 60HZ.
The noise would become more intense as the monitor warmed up, but would reach a point where it would not get any worse, but the monitor would flicker occasionally, as though it were receiving a signal out of its range.

When I reduced the resolution to 1200 x 1024, or 1024 x 768 the noise was not present.

I got tired of trying to fix the issue, so I rolled back the driver to the older one.
But every time I found a new driver on Nvidia's web site, I would try it, in hopes that the issue might be fixed. It was not.
So I resigned to using the older driver. Upgrading the driver really had no effect on any of my games anyway, so upgrading the driver was really just a geek kind of thing that I like to do.

So, everything was fine in XP land. But this morning I installed Windows 7 Ultimate on the same machine.
I created a dual boot so I can always go back to XP as needed.
When Win 7 installed, it would n... Read more

More replies
Answer Match 59.64%

I'm stuck between these 3 monitors. The HP 27xi AOC i2757fh or the Viewsonic VX2770SMH-LED 27

They all look similar, but I'm just not sure which one to get. I'm leaning toward the HP 27xi though, but this site rated the AOC i2757fh a little higher over the HP 27xi. I'd like to hear some feedback from you guys.

My main usage is playing games like BF3/BF4, SWTOR and Titanfall when it comes out. I also do a lot of web surfing and occasional movie watcher on this monitor. My current monitor is a 24 inch Asus VW246H and I like it, but I don't love it. So my main concern is how well it displays games. I don't want any ghosting and the least amount of input lag I can find. Now, I know the AOC boasts a slightly quicker response time of 5ms vs the HP's 7 seconds, but the reviews I've read thus far state there is no visual lag from the HP. What do you guys suggest? Thanks in advance!
 

A:HP 27xi, AOC i2757fh, or ViewSonic Monitor

Really? No one has an opinion on this?
 

3 more replies
Answer Match 59.64%

Hello guys,

So one night when I left my computer on, i wake up at 3AM on a rainy night and i notice my entire room flashing (like from a tv in dark room). I thought I was having a rolling blackout, but as I got to my senses I noticed that my monitor was the only thing turning off and on. I turned it off, and went to sleep. The next morning I went to go turn on my computer and the monitor does the same thing. It turns off...on...off...on...off...CONSTANTLY (about a one to two second delay between each) until I turn the monitor off. The LED light is green. It goes from green, to off, to green, etc. I've had no prior problems with this monitor.

I tried switching out the power cord and plugging it into my wall (not connected to my video card, or anything)...no luck. It's definately the monitor. I don't know if it's dead or repairable or what. I often leave the computer on over night but i have a 10 minute screensaver and my monitor goes on standby after 20 minutes. When i fell asleep, my monitor was on standby (yellow LED). When I woke up it was the green turning on and off. Doesn't make much sense.

I don't have a replacement...so my situation is pretty bleek atm.

I have a Viewsonic LCD VX924 3ms that i bought around the holidays of 2005. Any help would be greatly appreciated.
 

A:Viewsonic LCD Monitor turns off and on constantly

6 more replies
Answer Match 59.64%

I have a ViewSonic 2235 22" LCD. I need to find a driver to allow 1600x1050 resolution. I've been to ViewSonic's site and downloaded their signed and unsigned Vista drivers with no improvement - the closes resolution I have the option of is 1600x1024 or 1600x1200.

I had this monitor working fine with a 1600x1050 resolution. I changed out my motherboard (from an Asus p5w to p5e) and reinstalled Vista - and now I'm unable to get the monitor to the right resolution.
 

A:Solved: ViewSonic Monitor driver

Never mind, problem solved. I needed one additional Nvidia windows update, but was confused because windows said it was current on updates.
 

1 more replies
Answer Match 59.64%

Can any one out there tell me how to find out the best monitor settings, i am not sure they are correct, expecially the horizontal and vertical settings.
 

A:viewsonic a72f monitor settings

specs

1280x1024 maximum resolution
Displays a maximum resolution of 1280x1024; 1024x768 optimal resolution at 87Hz flicker-free refresh rate for easy-on-the-eyes viewing.
1280x1024 @ 66Hz
1024x768 @ 87Hz
800x600 @ 110Hz
640x480 @ 135Hz

http://www.viewsonic.com/products/crt_a72f.htm

drivers
http://www.viewsonic.com/support/drivers.htm
 

1 more replies
Answer Match 59.64%

My monitor seems to be experiencing some kind of problem.

The best way I can describe it is as a 'widescreen' mode. There is a black bar on the top and bottom of the desktop about 1 inch wide and extending across the entire length of the screen. I cannot move the mouse into this portion of the screen.

When adjusting the horizontal and vertical settings, 100% stops with the 1 inch black bars still in place. I cannot seem to make the desktop fit the screen. It seems to have shifted into some other mode of viewing.

I called Viewsonic tech support, but they didn't really know much else to do besides checking my settings. I am at 1024 x 768 resoloution, Radeon 8500 64MB graphics card, Windows XP and have installed the most recent drivers. Even when booting - the black bars are present, as if the monitor has somehow decided that is the mode it wants to be in.

If anyone has come across something like this before or knows how I might be able to fix it, I'd be MUCH obliged!

Regards,

Jeff.
 

A:Viewsonic Monitor E771 Problem.

Might be starting to fail, 3 year warranty on those generally check the date on the back. Absolute easiest think to do would be to try it on another computer. On the other computer see if you square up the image with the screen if you can't then its the monitor, if you can it could be the video card.
 

2 more replies
Answer Match 59.64%

Just upgraded to Win7 64bit. My trusty old monitor has no sound (the picture is fine) I found a driver for a generic Viewsonic x64 driver, http://www.viewsonic.com/support/dow...d_Win7_x64.zip but that didn't solve the problem. I read a suggestion somewhere to uninstall the driver and let Windows find it. That didn't solve the problem either. I tested the monitor with my old (XP) system, in case the monitor developed a sudden fault, but there is still sound when I plug it back in there.
Any suggestions would be appreciated. I really don't fancy having to buy a new monitor too, after having had to replace my printer and scanner

A:Viewsonic vx2235wm-1 Monitor has no sound.

What does the monitor require? Older monitors, that use VGA or DVI usually have a Jack to connect from the PC's Speaker out (GREEN) to the monitor for sound. No driver is required for that. There is no audio in a VGA or DVI connection, just video.

8 more replies
Answer Match 59.64%

What is the best way to clean a flat screen monitor? It's not a flat panel monitor, just a view sonic trinitron style....I got finger smudges and want to know the best cloth/fabic to wipe it with.
 

A:Wiping off a ViewSonic FlatScreen Monitor

Hi ChunkyTeXas,
I use a clean soft towel and water. It works fine> Turn the monitor off too before you clean it
 

2 more replies
Answer Match 59.64%

Hi Guys, I have no idea whats going on over at Viewsonic, however their support service is lacking some serious SUPPORT!!! Just the other day, I re-installed Vista 64 and had been happily using a x64 monitor driver for my VX2025WM, just before the re-install I decided to trall the net for latest drivers and deleted any old ones I had (stupid I know). Anyway on re-install with the latest unsigned driver - Standard_Monitor_Driver_Unsigned_Windows_x64 - Dated 04/10/2007, it is now telling me it cannot find my monitor. I've also tried the latest signed driver and this is not working either. I have tried a manual install from C:\Viewsonic and funny enough the monitor isn't even listed. I've asked Viewsonic for help with them replying asking me to download the latest unsigned driver (what the???) All I need is a copy of the previous unsigned driver to this one listed and I know 101% it will find my monitor and work, does anyone have it or know where I can find archived drivers, as Viewsonic have not responded to this request. Please help! Cheers in advance.

A:Viewsonic VX2025WM Monitor Driver

Ahh it's always the way... Just found the old (November x64) driver on DriverGuide.com and guess what, it WORKS!!! Tried updating manually to the new driver after I installed the old one and it's displaying a could not install new driver message. Bloody viewsonic, I HATE SUPPORT!!! Why do they treat us like monkeys???

6 more replies
Answer Match 59.64%

I have recently changed my hard drive and had to reinstall all the programs on my computer. Since doing so, the Viewsonic monitor has been stuck in troubleshooting mode. All the fonts and windows are very large, and the only resolution available is 680 x 460, with the only colour option at 16 colours.

What do I do to get a better resolution with this monitor. It worked fine until the hard drive was changed.

I have downloaded the driver for the monitor from the net which was unsuccessful.

I tried changing the adapter from standard to SVGA as recommended by windows, which was rejected by the computer and I had to change it back.

Windows is not accepting the driver that I downloaded.
 

A:[SOLVED] Viewsonic Monitor problem

13 more replies
Answer Match 59.64%

I just bought a new 19" A90F+ ViewSonic Monitor (not flat panel LCD) and everything went great for my 1st week. After this when I would move my mouse to take it off standby my perportions were off and the I could only see half the taskbar...I guess it change the display areas automatically. Also I have noticed some of the edges kinda slant in or curve at the edges some. It's so frustration because the bottom seems to be fine and the top corners can be half there. What's a joe to do?

PS: I Havne't even touched the OSD settings on the monitor itself...

Mike
 

A:ViewSonic Monitor Won't Square Up In Corners

6 more replies
Answer Match 59.64%

I have a viewsonic UltraBright A90f+ monitor and an ATI radeon 9600XT bravo video card. While playing some games my computer will hang and I believe use VPU recovery program supplied with the VC and then return to the game. After about 3 times the monitor goes black and "Viewmonitor" pops on the screen with 2 values 18.9 & 23.6 (normal values a lot higher)and the status is OVER at the bottom.It also says User Mode 14? I then have to restart the machine. Also I have noticed that sometimes when I exit a game my screen resolution has changed to that of the game I was playing. I have all the latest driver for Monitor and Video card. I have and ABIT MB using RAID set up and it also has its BIO's and drivers updated. I run windows XP also with 512M corsair ram.

Any help is appreciated

Thx E West
 

A:Viewsonic monitor locks up computer

Doesn't sound like the monitor is involved in the problem. A quick swap to another monitor to just be sure.

Does it only occur on one particular game? Anything running hot? How tight is the power supply sized?
 

3 more replies
Answer Match 58.8%

Never mind, as quick as the problem began, it's resolved itself for some reason. Post can be deleted.






I'm having a bit of a strange issue with my ViewSonic VX2258 monitor.
Out of nowhere, the screen started to flicker (not the sort of flickering you might expect from a loose cable, but literally going completely off and back on) every few seconds. Eventually the screen did not come back on at all.
Thinking there was a loose cable, I tried tightening them but to no avail. The light on the monitor is still blue showing that it is detecting an input and Windows still detects that the monitor is plugged in.
When I turn the monitor off and on, I can see the ViewSonic logo, but oddly enough after that it is a black screen and I am unable to get any system menus to appear (the ones that are generated by the monitor itself, not the PC) or change the source. I would have thought that because of this, there is something wrong with the display but that doesn't seem to be the case considering I can see the logo upon starting the monitor. (Perhaps something to do with firmware?)
I don't think that it is a problem with my GPU as my secondary monitor (a Samsung SyncMaster) still seems to be functioning perfectly but just in case, it is a Powercolor Radeon R9 290X and my drivers are all up to date.
Thanks for the help!

More replies
Answer Match 58.8%

I need help in making my mind up between the gorgeous Lg 1981Q and the attractive Viewsonic Vx924.

I have recently upgraded my desktop and am thinking about shifting to dual screen, mainly for video and web editing (with a little bit of gaming on the side) and need help in picking out new monitor.

one of my problems is that the looks of the tft is very important to me, cos i cant look at something ugly all the time, i would like a tft which is slim and very sexy (just how i like my women )

If anybody owns either of these screens i would really appreciate their feedback, on how good the monitor is and if they would recommend it.

Thanks

Chewbacca.

P.s is there really that much noticable difference between 4 and 8 ms, and if so is it going to be noticable when video editing and gaming.
 

More replies
Answer Match 58.8%

Dear,
I have Viewsonic P225f CRT monitor. My desktop computer has Microsoft Windows Vista Ultimate 64-Bit operating system. I want driver suitable for 64-bit. I had tried to install unsigned/signed driver from Viewsonic web site but installation encountered problems. I have a gaming system see specifications below, so I want to install Viewsonic monitor driver instead generic driver. I can send you error details as attachment if you mail me link. Kindly solve this driver problem.

Thanks


Processor: Intel Quad Core Extreme Processor QX6700
Motherboard: MSI P6N Diamond Nforce 680i SLI
RAM: Corsair Dominator Quad Kit 4GB DDR 2 1100MHz
Graphic Card: NIVIDIA Geforce 8800 Ultra OC SLI (768MBx2)
Hard Disk: Dual 1000 Giga Seagate 7.11, SATA, 32MB Cache for RAID
Sound Card: Creative X-Fi Fatal1ty
Optical Drive: LG 18X DVD-RW, SATA
Speakers: Creative Gigaworks S750
Power Supply: Enermax Galaxy 1000 Watts SLI
Casing: A-Open QF60
 

More replies
Answer Match 58.38%

hi all - ive got a problem with my new viewsonic vx2753mh-led monitor. its got 2x hdmi inputs and one vga.

the vga works straight off the bat, but whenever I try and plug the hdmi in it just says no input signal detected and goes black

I noticed in device manager that this was installed as 'generic non-pnp monitor' so after jumping through some hoops i managed to install the driver as 'viewsonic vx2753 SERIES'
Anyway this doesnt seem to have made a difference. still no input through the hdmi.

I have tested to cord on my samsung tv and it worked fine so it can't be a problem with the cord or the graphics card....

just some general info that might be of use:
windows 7 x64
dual monitor setup

the graphics is integrated on the intel i5 chip
my display adapters in device manager says Intel(R) HD Graphics Family.
it has a dvi out, hdmi out, and vga out.

thanks for any help you can give!

A:Viewsonic LCD monitor not recognizing HDMI input signal.

I have a Viewsonic which I'm also trying to run a media PC to connected via an HDMI cable, and I have noticed the exact same thing.

It was working fine for awhile, but recently I have been receiving an error on screen saying the "HDMI to DVI cable as experienced an error" or something to that effect. Note: I am using strictly an HDMI cable, not an HDMI to DVI as the message states (can't explain why I'm getting that message). I did the same thing you did, tested the machine using the same cable on another tv, and it worked fine on the other tv. What's strange is I can connect the cable box to the tv using the identical HDMI cable and it worked fine. Tried again using the same cable from the PC to the tv, and either 1) blank screen, or 2) shrunken screen with the aforementioned error which will go blank once I open Media Center.

Sorry, I don't have an answer, but it seems to me Viewsonic hasn't made a good product in terms of connecting media PC's, for some reason. Of course, my tv is out of warranty at this point. If you find an answer, keep me posted, I'll do the same.

I have a Viewsonic VT2430 monitor/tv, and a Windows Vista 64, with ATI 4200 graphics chip PC.

2 more replies
Answer Match 58.38%

Title says it all really, just put a scratch in my 3 week old monitor , mildly annoyed about it and wondering whether theres any way to make it go away. When I run my finger over it it dusn't feel like a scratch, but with the monitor off, or showing a bright white screen its quite evident, and running fingernail over it i can tell its an indentation. Against bright white it looks almost like the effect seen if theres water on your monitor (rainbowy), if that helps at all. Basically i'd just like to be not able to see it, and was wondering if you had any suggestions?
 

More replies
Answer Match 58.38%

Just performed windows update on my Dell Inspiron Desktop 560MT - Intel(R) G45/G43 Express Chipset. I am running Windows 7 Home Premium - 64 bit. I have been using dual monitors on the system since purchase. After performing windows update today my second monitor (connected by HDMI) will no longer display. The other monitor (the working one) is connected via VGA. The system does not recognize it is even connected. At start up however it will display up until login window. I am using two ViewSonic VX2453 Series monitors. I am desperate as I have to have both monitors for work. I have tried unplugging and replugging, restarting it with it unplugged and plugged. I uninstalled the update and have tried autodetect on the system all to no avail. Help!!

A:After Windows update 2nd Viewsonic monitor will no longer display

KChristians, welcome to the Seven Forums.

Sounds like you have WU set to automatically download and install updates, and it updated either the video or monitor driver. If that is what happened check your update history and you can uninstall it from there and should get you back to the previous drive.

Also if that s what it was you might want to set WU to not download and install drivers automatically, step #4 here,

Device Installation Settings

7 more replies
Answer Match 57.54%

 I have it hooked up with HDMI (brand new gold plated cable). The text especially is blurry/fuzzy and the screen doesn't take up all the space it should - about 1/2" at the top and sides, bottom is ok. The guy at View Sonic support said it was a video card issue and I would have to figure it out with HP or Intel. Can anyone help me? I have Intel HD graphics. The monitor is Viewsonic VX2270-Smh-LED. It's 21.5" 1080p frameless IPS display.

A:Trouble with Spectre x360 and Viewsonic Monitor, blurry text...

 Hi @butlerll, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Spectre Notebook and the HDMI port not working correctly. Try running the Windows updater Tool. Here is a link to help troubleshoot the HDMI Display. If the Notebook is not having an issue displaying anything on the Notebook screen, it is not a graphics card. Please get back to me how this goes. Thanks for being a part of the HP community. Please let me know if this help resolves the issue by marking this post as Accept as Solution.  Thanks. 

8 more replies
Answer Match 57.54%

Me and my friend just finished our computer, we had a few issues with the NZXT Phantom case at first: they didn't send us a few screws so we had to go to the local tech store and buy a few, but everything worked out.

Anyway

Our screen seems to be having a slight problem: the image of the screen is not taking up the entire space provided by the screen.
There is an option that we found: Auto Image Adjust, and I am sure this is the right one, except: it's disabled!

It's a ViewSonic VX2450wm-LED Full HD 1080p
We have Windows 7 installed on it, and everything is working fine.
The Screen Resolution is set to 1920 x 1080.
DPI Setting is at 150%


Thank's for the help!

A:[SOLVED] ViewSonic Monitor Auto Image Adjust Disabled

How much of the screen is being used?'

What is your GPU?

How is it connected?

Did you install the drivers for the monitor and GPU?

5 more replies
Answer Match 57.12%

Dear All Experts,

Hello! How are you all doing? Well today, I came across this Viewsonic LCD Monitor which looks quiet appealing and of course, being manufactured by the leading display technology company of the world  Viewsonic! Heres the link to the product:

Viewsonic VX2433wm (24inch HD LCD Monitor)
http://www.viewsonic.com/products/de...s/vx2433wm.htm

Now here's what I need to know:

My main use of an LCD Monitor will be to:

* Watch Movies (Which should include a DVD & High Definition (HD) Quality Videos).
* Play 3D and Normal Games.
* Movies like Jurassic Park, Speed, Titanic, Action Movies, etc...
* Web browsing, doing back work on PC, Listening to music.

So, this in short will be the purpose of using a new LCD Monitor. So far, I am using CRT Monitor.

Once you have gone through the above link, could you kindly let me know how well would this Viewsonic LCD Monitor fair in terms of my above mentioned usage.

BUT NOW HERE's A TwIsT >>> While looking forward to buy an LCD Monitor, one question that kills my decision of buying it is that What if a Touch Screen LCD Monitor will be made available once Windows 7 releases to users. Then would all these LCD Monitors sold out today will be consider completely outdated not only in terms of technology but features as well. However, there are few things that comes to my notice for going with an LCD Monitor and not a Touchscreen one...

a) Touch Screen LCD Monitor is for sure goi... Read more

A:Viewsonic VX2433Wm's - Is it a good LCD Monitor? Should wait for Windows 7 Touch Scre

Hi, Viewsonic is a well known and trusted brand (in my experience) you will find that most modern monitors are well made certainly need to be FCC certified for US sale . Now there is one major element missing from your post. What computer specs have you and most important Memory, Video card and Power supply unit (PSU).

2 more replies
Answer Match 51.66%

I have a Viewsonic E-655 and when I put it on my computer nothing happens... if I pull out the power and then replaace it there is just five shimmering balck belts accross thre screen. I tried it on my Mum's computer, and it came up with the message Frequency Over range. What is this.
I had it out last night and had it plugged through a Sanyo projector - ie. the computer plugged into the projector and so did the monitor. Would this have done it? Also, carrying it back out to the car when it was raning might have gotten it wet?

Thanks in advance for any help!
Tony
 

A:Viewsonic Monitor "Frequency Over Range"

Only thing I can think of is that your video settings got changed somehow. Can you put another monitor on your machine, boot up into windows. go to start/settings/control panel/display/settings tab/advanced button/adapter tab/ in the drop down box if refresh rate is set to optimal change it to adapter default, save , shutdown and hook up the other monitor. Long shot, probably won't work
 

1 more replies
Answer Match 46.62%

Im doing this for my Dad, so i have absolutely no idea how to describe the problem but i figured this place was my best shot as google is giving me no results on my query.
There appears to be no monitor drivers installed on the pc... and its running from the bare minimum settings. I think the refresh rate is set at a low low low setting, because lets say, if i move a window by dragging it across the screen, its all choppy, doesnt move smoothly at all... sort of like it jumps every half a second until i stop moving my mouse, then stops. The same with when i'm scrolling in internet explorer... smooth scrolling doesnt exsist! lol

I figured it was a driver problem seeing as there wasnt one installed. So i found the disk with the drivers on, and followed the instructions, which were as follows:
"Right Click" the mouse anywhere on the "BLANK" area on the desktop and click on PROPERTIES.
Click the SETTINGS tab and then click ADVANCED.
Click the MONITOR tab and then click PROPERTIES.
Under MONITOR PROPERTIES, click DRIVER then click UPDATE DRIVER.
On the HARDWARE UPDATE WIZARD, select Install from a list of specific location (ADVANCED) then click Next.
On the next HARDWARE UPDATE WIZARD window, select DON’T SEARCH, I WILL CHOOSE THE DRIVER TO INSTALL. Then click NEXT.
On the following window, click on HAVE DISK.
Type “D:\ENGLISH\DRIVERS” (Where “D” is the drive letter of your CD ROM Drive) on INSTALL FROM DISK window then click on OK.
Highli... Read more

A:Solved: Can't install monitor drivers for AOC flat screen monitor

Additional monitor drivers are usual not needed. What do you have for a video adapter and are those drivers installed? Right click on My Computer choose Properties/Hardware/Device Manager. What information is listed under Video Adapters?
Also what are your screen resolution and refresh settings?
 

3 more replies
Answer Match 40.74%

I have a suspected cold solder joint in the power supply of my Viewsonic VP2130b monitor that I could probably locate and fix myself if I could figure out how to get it apart. Any help would be appreciated.

Thanks in advance
Best regards
GordL
 

More replies
Answer Match 40.74%

I bought a viewsonic 1945wm 2 days ago and there is a continuous buzzing sound when it is displaying. Is it normal?
 

A:viewsonic vx1945

uh, how louds the buzzing?
 

3 more replies
Answer Match 40.74%

Hi guys,
I'm about to buy an 17 inch LCD screen Viewsonic VX715.Anyone familiar with the model?Anyone can give me their opinion on the model?

Thank you
 

A:Your opininion on Viewsonic LCD

lyam77 said:



Hi guys,
I'm about to buy an 17 inch LCD screen Viewsonic VX715.Anyone familiar with the model?Anyone can give me their opinion on the model?

Thank youClick to expand...

Well,
I have just bought the monitor and i must say it is great. Of course it is not intented for gaming. The price was really good too. 399$ CAN.
I am very satisfied with this model.
 

1 more replies
Answer Match 40.74%

Hi,

I have a ViewSonic 19" UltraBrite a90+ with a ati radeon 9800 pro....

When I play games like CS things far away and even up close kinda shine with this glare and its really annoying. Plus my monitor -- which i got last december -- has these lines going acrross it. On wallpapers and programs such as a game theres these strips that go all over.

I dont think its my video card and i have my fresh rate @ 120hz

any helpers?
 

A:ViewSonic A90+ Problems

These are the MAXIMUM refresh rates of your monitor, exceeding them will damage it. Your monitor does not support 120Hz.

2048x1536 maximum resolution

Displays a maximum resolution of 2048x1536; 1600x1200 optimal resolution at 87Hz flicker-free refresh rate for easy-on-the-eyes viewing.

2048x1536 @ 68Hz
1920x1440 @ 73Hz
1856x1392 @ 75Hz
1600x1200 @ 87Hz
 

2 more replies
Answer Match 40.74%

Alright here's a good one, monitor less than a year old, I could never load drivers for it because screen would go haywaire, real wavy along the side edges. ok so I've been using the win98se driver, plug and play monitor ones, well now it's doing it even with them. I d/l the latest driver for win98 from Viewsonic, load them and it really goes berzerk, delete them, screen is still unstable. So, I do a print screen while it's doing this thing so I can post it for you folks to look at, and when I paste it into notepad the picture is fine in the file. what I mean is that to the pc the screen is normal, man am I confused. What does this mean???
 

A:Viewsonic Optiquest Q75 what the h***

Ether your monitor is slowly dieing, or your refresh rate is too high.
 

2 more replies
Answer Match 40.74%

My daughter's AOC monitor died, boo hoo, it was 6 years old so it was bound to happen. O.K., I buy a spanking new Optiquest Q75 plug it in, load the drivers and voila, it totally screws up her pc, I mean the screen was distorted like i never seen before in my life. It was like 2 giant magnets were going up and down the sides of the monitor. I brought the monitor up to my pc, it worked fine...those dam drivers screwed up her entire operating system, I could no get them off her pc so I reformatted her HD, 4 hours and many grey hairs later, (I mean if I still had hair that is), she has a new monitor. Imagine me thinking I was just going to plug it in.
 

A:Viewsonic hell

Brite
Hummm... seems you ran into imcompatable drivers! Had that happen on my matrox Etv video card and really had a ball straighting it out! I didn't have to reformat though!

Dave
 

2 more replies
Answer Match 40.74%

I've downloaded and gone through the Device Manager install of the Vista signed and unsigned drivers from Viewsonic. Choose the vx2835wm as the monitor and... "file not found". Viewsonic support sends me to a link that says "no drivers available" and then says to download their Vista 64 package I've been doing since day 1. (been doing this and all suggestions since Nov 2007)

Vista Ult. 64 uses its default non-pnp drivers where I have my 1920x1200 native res. with everything but gaming (the reason for purchasing this monitor). I can't get anything higher than 1600x1200 (in gaming) and well, its fuzzy. Can't use windowed mode, OS drivers stop functioning and reload frequently. I've set the res. in the nVidia panel to 1920x1200, set the game ini file to 1900x1200 but it still will only work at 1600x1200 although the games support the higher resolutions.

Is there anyone here that uses this monitor that has found Vista 64 drivers that work? If not, is there a 28", or even 30, that has Vista 64 drivers that will work at native resolution with any program or game?

I am ready to sail this monitor out the third floor window and buy another if I can't get a solution for fixing this one so need recommendations on other monitors as well.

Thank you

2x8800 nvidia ultra's sli'd
extreme core 3.0
4gb corsair
evga nforce 780i
thermaltake 1000 watt ps
sb extreme gamer fatality

A:Viewsonic vx2835wm

Dwarf I don't see your reply here although I did get an email that you posted.

The following link is to the signed standard Viewsonic monitor driver for Vista 64-bit. This driver should be installed with administrative privileges. For games, you might need to adjust your settings such as anti-aliasing in order to be able to use this resolution. The higher certain settings are, the lower the maximum resolution that is available. This is just a matter of trial and error, bearing in mind that higher resolutions require more working RAM on the graphics card and also a card of sufficient power to yield a decent frame rate at these settings.
Dwarf

I did download those many times each time it was updated by Viewsonic. It goes through the device manager wizard fine and then 'file not found'. However, someone did message and email me their driver folder from the monitor cd and it worked. Apparently my cd was a bad one. So all is well and working. Games are working great with the right resolution now.

OSL

4 more replies
Answer Match 40.74%

I got a new VA520 for Christmas and have noticed that @ certain times when scrolling pages or programs the images and text sometimes shimmers or jerks. Is this normal for LCD's monitors?

I've got lastest Driver for my Video card.

Thanks

Saintfan
 

A:ViewSonic LCD question

anybody have a clue?
 

2 more replies
Answer Match 40.74%

I was looking to go from my 22 inch NEC FE2111(too big) to an LCD monitor; However, I can't seem to make up my mind. I've narrowed it down to the Viewsonic VP191B ($449.00 at newegg) or the BenQ FP91G+ ($329.00 at newegg). I've heard nothing but good things about BenQ, and I already know the excellent reputation of Viewsonic. I do alot of gaming so that's an important factor. I know CRT has better visual quality than LCD, but I need to conserve space, so any input on these 2 monitors would be appreciated.
 

A:Viewsonic or BenQ

We use Viewsonic 17'' at my work & they r ok. Although I have a BENQ at home & I find it way better than the others. I had an LG one b4 & seriously the BENQ not only looks better but was cheaper too! they r owned by Acer or some other joint big organisation & are not crappy at all. others have said that because they haven't heard of them then they must be crap, but you just have to research them b4 judging.

Either r good ... but yeah thats just my opinion :grinthumb
 

5 more replies
Answer Match 40.74%

Hey guys, in device manager i seen that i have the average plug and play display driver and i was wondering if there is need for me to download my monitor driver from acer ( Acer al1916W) and what does that driver actually do.? better res.?

thanks
 

A:Monitor Drivers

I've installed Dell drivers for mine in the past but never really see any benefit to be honest. Whether on VGA or DVI.
 

1 more replies
Answer Match 40.74%

Well found the first thing wrong with the CP Review; it doesn't support "Plugable's" USB device used for supporting three or more monitors. Checked on Plugable's website and downloaded the new drivers, albeit that was a no go. Left a message on there site will see what comes of it in a couple of days.

. . .boowho, now I am without three monitors. It makes me sad.

Edit: Plugable now has "Beta" drivers for their device. Thus far all is working just fine. It is good to see Win 8 working on three monitors.

More replies
Answer Match 40.74%

Been trying to get an older system put together to learn LINUX and can't find Monitor/screen resolution drivers for Samsung's Samtron 77V s monitor. Samsung's site doesn't even acknowledge that they ever built it. I can plainly read the model number, serial number and the date of manufacture on the plate at the back and the admonition that Samsung will sue the bejesus out of any one who illegally modifies or otherwise alters, tries to alter or deface the equipment.

Any help out there? I'd like to get up to about 1040 by 768 on it. While it was attached to a PC in the office it ran at that resolution, or even tighter.
 

A:Monitor drivers

16 more replies
Answer Match 40.74%

Hello guys and gals

I recently bought a second monitor for a steal (19" LG). I have been studying up before I actually wanted to install it. Many places say that you need to install the monitor drivers and other places say you don't. So my questions is that have any of you had experience hooking up a second monitor, and if you in fact need drivers or not. When I purchased the monitor it came with no drivers.

Many thanks

A:Drivers for 2nd monitor?

it depends on the input sometimes too a (d-sub) or dvi monitor. (it will only be these two in this case as their wont be a HDMI cable for a 19" monitor)

I recommend you just plug it in, most of the time it will just work, seriously.
If it doesnt that's when you look for the drivers. How are you trying to plug it in, what input are you using? But before you do all this (just to make sure) update your display drivers and your graphics card software first because when you do this, it will eliminate the chances of having to do this later.

Im getting 4 monitors after I hook my pc up into SLI, 2 is fine for me atm. But monitors shouldnt be a problem.

3 more replies
Answer Match 40.74%

Hi
i just wondered if anybody could help. i have been searching for monitor drivers fro a dell trinitron D1526T-HS. i have just bought a second hand computer and monitor from seperate sources. my computer is a crix chip 333 cannot find any make on motherboard except P5Sd-AS rev1.0. have searched dell site and others with no luck. can anybody help.

many thanks
 

A:monitor drivers

Generally the Plug-n-Play Monitor Monitor driver supplied by Windows by default is just fine and most monitors do not require anything more. If you only have 16 Colors and a resolution of 640x480 then you may need to install teh Video Card drivers to get anything higher.
 

3 more replies
Answer Match 40.74%

I have a Compusa 17 inch Monitor, sku 189150
Does anybody know where I can get the drivers for this?

thanks
 

A:drivers for my monitor

CompUSA does not really make monitors. It is probably some rebranded thing from a real monitor manufacturer. Look at the sticker on the back for some model or serial number that could hint the real company that made it.

Strictly speaking you don't need drivers for a monitor. Just choose any decent monitor from the list Windows gives you and force that. Then just try out the refresh rates and resolutions to see which ones actually work with your monitor.
 

4 more replies
Answer Match 40.74%

Hello!

I just made a clean install of Windows Vista and I was going through the process of installing drivers from diffrent CDs when I found a CD for my NEC monitor. I have a MultiSync EA231WMi monitor. I inserted the CD and found that there is a folder named Drivers and inside that folder there are 3 additional folders named according to the model number; E222W, EA221WMe, EA231WMi. The EA231WMi folder contains following files:

ea231wmi.cat
ea231wmi.icm
ea231wmi.inf

What am I supposed to do with these files?...

Do I really need these files? I mean, my monitor is working, so what is there to install?... what is there to "drive"?

Thanks!
 

A:Do I need drivers for my NEC monitor?

6 more replies
Answer Match 40.74%

hey ya'll.. i have a compaq monitor 171 fs i cant get the settings to work in the settings.. i need the driver for this monitor if any one knows where i can get on i would apr. it im running win 98
 

A:monitor drivers

Found this one at drivers guide

Manufacturer:
Compaq

Device Type:
Monitors

Model:
Compaq 171FS

File Name:
cpq_mon.inf

Size:
60429 bytes

OS:
Windows 95a
http://www2.driverguide.com/cgi/download.cgi?uploads11/15560/cpq_mon.inf
 

2 more replies
Answer Match 40.74%

I currently lost the driver for a monitor, and now I can only get 16 bits of color, how can i get the driver back with at least 256 bits of color? It is a packard bell monitor
 

A:monitor drivers

Its the video card rivers that you need . Look in device manager under video adapter for a red x or exclamation point. If so then you will need to reinstall its drivers.
 

2 more replies
Answer Match 40.74%

I recently switched my monitor driver to the Plug and Play driver, but have now switched it back to the optiquest v73 driver. The problem is that now it will NOT let me select as many colors or as many pixels as I had before. For example, the list only goes up to "High Color" when previously I had "True Color." Yet even when I select High Color and then reboot, I am still in 256 colors. Similar problem with resolution.

The driver I am using is called MONITR11.INF; it also tells me I am using an "Optiquest V73 on NVIDIA GeForce 4 MX 440", which is true.

Aditionally, shutting down now causes Windows to close and the screen to turn black, but not the tower to turn off.

I believe I have done nothing with the video card or its drivers that could have caused this.
 

A:Monitor Drivers: Act II

7 more replies
Answer Match 40.74%

I am looking for drivers for my Ipex 15inch monitor.
 

A:Drivers for my Monitor

You should be able to use the windows default drivers for this, but here's the link anyway.

http://drivers.ipex.com.au/
 

3 more replies
Answer Match 40.74%

I'm using a gereric monitor. I'm having problems getting my video card to work. Do i maybe need new drivers for my monitor. I'm trying to install a ati graphics pro turbo mach64 gx card. my resolution looks like junk all of a sudden. i got scanlines and everythings all 16 color looking. i'm using windows 98. and running a pentium III.
 

A:Monitor Drivers

The driver for the video card should be all thats needed. If you have installed that, the problem is probably in the settings within that video cards program
 

1 more replies
Answer Match 40.32%

as the title mention, my viewsonic LCD is not working with my copy of window 7. i dont know why. i have tried with my old samsung CRT, both of the DVI (using DVI-VGA converter) and VGA outout is working perfectly, but i cant get my LCD working. when i boot from safe mode, the LCD working. could it be my gfx card problem? here is my system spec. hope to solved this problem soon.

OS: MS window 7 ultimate 64bit
window version: 6.1.7600 build 7600
processor: Q6600
mobo: gigabyte GA-P35-DS3
mobo bios: F14 (latest)
GFX card: palit HD 4870 sonic dual version (512mb)
GFX driver: 9.12
RAM: CORSAIR DOMINATOR 4G DDR2
HDD: WD 320G
PSU: CM 650W
OUTPUT:
1.VIEWSONIC VX1935WM
2.SAMSUNG 107T

thanks in advance..

A:viewsonic LCD is not working with window 7

Hi FairCold and welcome to Windows 7 Forums

Since your LCD monitor is working when you boot into safe mode, that eliminates hardware. It is probably a driver issue or, more likely since your CRT works, a settings issue. What refresh rate have you got it set at? There is generally no need to drive an LCD monitor at a higher rate than 60Hz. A CRT, on the other hand, can work upto 150Hz (depending on model and resolution). If your refresh rate is other than 60Hz, try setting it to that frequency and see what happens.

2 more replies
Answer Match 40.32%

My monitor is 1.5 years old and has been working perfectly. (I take very good care of my monitor!) Yesterday, with no warning, the screen slightly dimmed and then went black. The "on-off" switch flickered. I tried disconnecting it from my CPU and unplugging it from the electrical source and I tried re-booting my computer. None of this made any difference. I have a new video card but connected the monitor to another computer just in case the new card was bad. Again, no results. I hate to think that a 1.5 year old monitor needs to be replaced. Any suggestions? Thanks!
 

A:Viewsonic VX910 problem...

Does it even go to standby mode ? If you simply connect the monitor to a power socket & not to a computer, when you turn it on it should go into standby mode. If it doesn't even do that then it is your monitor that's at fault (& probably needs to be sent in for repair).
 

4 more replies
Answer Match 40.32%

Hi Everyone,

This is my first post here so I hope someone here can help me. I'll lay down my situation, and then I pray someone has an answer for me. Ok, here goes:

I have a ViewSonic 32" LCD T.V./Monitor ((Link: http://www.viewsonic.com/support/desktopdisplays/lcdtv/n3250w/ )) Just in case you want to see it.

But anyway, the problem with this monitor is this. Over the past month or two, my monitor began flickering. Over time its gotten worse and worse, and now the screen becomes garbled on the right half of the screen and sometimes it completely blanks out...almost as if the screen is melting. I've tried everything...the first of which was buying new cables. I bought a new monitor cable from my work...but yet the problem persisted. I bought a new graphics card ((ATI Radeon x1650 Pro 512MB card)), installed it...but it was still garbled. Recently I tried hooking a new desktop up to it...and still the monitor was garbled. So I narrowed it down... it has to be something with the monitor. But before any other conclusions are thought up, I also have a Xbox 360 plugged into the monitor that runs fine...no screen flickering or garbling present at all. So, the problem must be in the monitor cable adapter/hook-up thing located on the back of the T.V. Before I fight over the manufacturers about fixing my monitor...does anyone know anything else I can attempt to try and fix this thing?

Thanks for any reply....this thing has been a pain....
Vernan
P.S. I'm go... Read more

A:Garbled ViewSonic Screen...NEED HELP!

Check the refresh rate of your monitor and be sure you are not driving it faster than it was designed to be driven. Also, be sure you are not attempting to use resolutions higher than the monitor was designed for.
 

1 more replies
Answer Match 40.32%

hi

I have a 15" Viewsonic VA520 LCD monitor that is having some problems.

The monitor has a a built in "auto adjust" and at the moment all of a sudden it keep auto adjusting over and over again. I cant shut my monitor off unless i turn the power cord off and when i do the same problem occurs over again.

Ive unplugged the monitor, then plugged it back in, unplugged all the computer wires and then replugged, done a virus check but it is still like this.

There are 4 buttons on the bottom of the monitor

if i click the 3rd button (the up selection button) and hold it the "adjusting" goes away but the minute i let go it reappears. I hold that button and then hit power the monitor shuts off but not normally.

So i guess my question is how to i make this auto adjust go away other than to take it to a dealer and get it fixed. Im wondering if there are other options.

thanks.
 

A:Viewsonic LCD wont shut off

someone just told me this might be a video card problem. Is there any way to figure that out?

thanks.
 

2 more replies
Answer Match 40.32%

I hooked up a brand new Viewsonic (VX1940w LCD 1680x1050) monitor to my macbook 10.5.7 (1280 x 800) and the picture is fine but the text is super grainy and hard to read. I have tried messing with the resolution and toying with Mac's font smoothing feature with zero success. Please help!

Here are some more specs:

Color LCD:
Resolution: 1280 x 800
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
VX1940w:
Resolution: 1680 x 1050 @ 60 Hz
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
 

More replies
Answer Match 40.32%

I've got a Viewsonic P95f+ monitor.

19" CRT

I keep the brightness at medium level, but it regularly goes darker (Grey/washed out) and it gets harder to read the print (Seems blurry). I haven't nailed down a pattern, but I'd say every 15-20 minutes or so. It lasts 1-10 minutes, then goes back to my regular brightness.

The monitor is probably 5-7 years old, but I've had no problems until now. I recently put in a new power supply and graphics card in my PC, but I can't say if this started before or after those changes.

Could this be a problem with a driver/the graphics card/power supply, or is it just time to get a new monitor? Any tips on how to diagnose?

Thanks,
Eddie
 

A:Viewsonic CRT Brightness Problems

Sounds like you will need a new monitor. Since it is happening fairly often hook it up to another computer and see if the same thing happens.
 

2 more replies
Answer Match 40.32%

Just purchased a new Viewsonic VA720 17" flat screen & had problems installing same. Took it to technician, paid $60, got it home and plugged it in. Nothing - no screen image and a complete lockup; had to unplug unit from wall to shut down.

Started it with WIN98 emergency disc and it went directly to the BIOS setup with following statement (in red). During the last boot up your system hung up for an improper CPU external speed setting. Your system is now working in safe mode. (Bus: 100MHz, DAM: 100 , PCI: 33 MHz). To optimize the system performance & reliability make sure the CPU speed conforms to the specification of your CPU.

Had previously copied all BIOS data (thank g-d) so went over it & found the tech had turned off the Plug & Play O/S. I turned it back on and the screen showed up immediately with no further problems to date. Called the tech and he claims they always turn off the plug & play as they found it interferes with system operation. Is this true?

Also I still wonder how to optimize the system by making sure the CPU conforms to the specification of the CPU. Any help and/or information on this matter would be greatly appreciated
 

A:Viewsonic flat screen

I think you will get arguements either way on using plug and play os or not.
I have always used it without a problem and so my feeling is if your going to run a plug and play operating system why disable it.
 

1 more replies
Answer Match 40.32%

Can Anyone gimme a win7 video driver of viewsonic

A:Need Viewsonic Windows 7 Driver

Read this: Driver Update Windows 7 - How to Update Drivers in Windows 7 - Device Driver Update
ViewSonic Support Information - ViewSonic Drivers - ViewSonic Manuals - ViewSonic Tech Support
cheers

6 more replies
Answer Match 40.32%

Hello I recently recieved a a90f CRT 19inch viewsonic monitor

http://www.viewsonic.com/support/desktopdisplays/crtmonitors/aseries/a90fplus/index.htm

When I plug it in and connect to pc, the yellow power light turns on. When I turn on the pc the yellow light turns to green as normal, but the screen stays black.

I have tried it on as low as 800x600 resolution and on 2 different PC's. Video card ATI radeon 128mb 9800 pro.

Is this a defective monitor? and is it able to be fixed? Or is is most likely a tube problem, or am I missing something in my ignorance. Any help would be appreciated.
 

A:Viewsonic a90f problem ?

Hello and welcome to Techspot.

The fact that you`ve tried the monitor on two different pc`s, would suggest to me that the monitor is faulty.

Regards Howard :wave: :wave:
 

3 more replies
Answer Match 40.32%

I have a custom build system that has performed flawlessly since I built it about 15 months ago. I just purchased from Costco, a ViewSonic VA2012wb LCD and it is able to do everything (MSOffice, Internet, etc.) except run my games (Call of Duty, Medal of Honor, etc). Call of Duty upon launch, causes a black screen with 'out of range' complete with system hang - requiring reboot. MOHAA attempts to launch, but fails with the message 'GLW_StartOpenGL() - could not load OpenGL subsystem'. All ran fine with my old 17" CRT.
My config is:
Custom Build - P4 3.00GHz PC3200 DDR-1.0GB RAM XP Pro SP2
128MB ATI All-in-Wonder 9600
ViewSonic VA2012wb LCD (used in analog mode) 1680x1050 60Hz(defaults)
HP CD-Writer+ 9100 / SONY DRU 720A DVD RW
WD80GB / WD120GB / APC UPS
DirectX 9.0
I have looked for updates and patches to address the errors at the sites of ATI, ViewSonic, and Windows Updates, with no relief.
I hope someone is familiar with this and can offer a hand.
Thanks - LB
 

A:ViewSonic VA2012wb 'out of range'

6 more replies
Answer Match 40.32%

I'm sure it's been asked and re-asked, but I couldn't find the answer. Anybody know where to find the vista x64 compatible drivers for a Viewsonic VX900 Monitor?

Thanks in advance.

A:Viewsonic VX900 Driver for x64

Hello ckylepa,
Try these drivers, they are x64 so should be OK. They have been scanned and are clean.

Standard_Monitor_Driver_Unsigned_x64_070524.exe

Install as admin.
Good luck and post your results.

1 more replies
Answer Match 40.32%

Hey iv got a Viewsonic VX2260wm. I try turning my pc on and my monitor is dead. It was switched off the night before and wasn't touched in any way.
Iv tried switching power cables and dvi cables. Still no life. No power light, nothing on screen, totally dead.
Any help is greatly appreciated. Thanks
 

More replies
Answer Match 40.32%

This monitor came with a DMI cable and the usual VGA cable. I ordered and installed an nvision 6200 card and I installed the latest drivers for the card and disabled the onboard video on the motherboard. Question: I attached the DMI and VGA cables onto the Video card but I not sure that this hookup is correct. Should the VGA cable be attached direct;y to the tower or is my present hookup just as good. Picture quality is good but it 'may be' better if the VGA is hooked to the tower. As usual, TIA.

EDIT: Just thought my question and I believed my present hookup is the only way for me to go. Why? Because I disabled the onboard video, hooking the VGA cable to the tower would not do anything for me.
 

More replies
Answer Match 40.32%

Looking for drivers for L5009 Touchscreen monitor to work with a 64-bit Linux kernel. I'm going to try the EloTouch APR drivers, but was wondering if anyone had gotten one of these working with X-11.

A:Drivers for L5009 monitor.

cynjut Sorry, but I checked the product page for that monitor and HP does not supply and Linux drivers. My suggestion is that you check the community forum for the Linux distro that you are using, as they generally have lots of information on alternate drivers in their hardware sections. If you don't know the location of the community forum, then check this site, as they have links to the different distro websites:  http://distrowatch.com/ Good Luck========================================================================I am a volunteer and I do not work for, nor do I represent, HP.---------------------------------------------------------------If my posts helped you, please click the Thumbs-Up symbol on the left of the Reply button to say thanks.If my posts solved your problem please click "Accept As Solution" -- to help others find the solution.========================================================================

1 more replies
Answer Match 40.32%

Hi
I have an AOC Spectrum 7Glr monitor and i have just installed SP2 and the resolution and colour are wrong and when i go to display properties ->settings -> advanced -> monitor -> there is no option to change or update the driver.

All the tutorials i have found on website say to update from there - how can i install drivers to make this work properly?

Cheers
Ryan
 

A:Installing Monitor Drivers

16 more replies
Answer Match 40.32%

It would be easier to explain what actually works on my system but here it goes.
When having high speed internet installed on my system the tech decided that my computer would be the one that he destroyed that day. He thought it would be nice to erase several programs in windows 98 se and didn't bother to let little old me know what he did or how to rectify the situation. after the attempted installation upon start up I received more error messages than than SPAM in my e-mail. The system informed me that several windows files were corrupt and I could not even use my office 2000 programs??? Well I was a little miffed but trekked on and tried to reinstall my windows however, he erased my driver for the a: drive and I had no way of reinstalling. Now I'm not real smart but I knew I was in trouble when I YES I, erased windows from the C:drive. I knew that I, as well as, my computer needed some professional help. A friend of mine finally managed to get windows installed and I know you'll be as delighted as I was to find out that I could use my office products once again.
Now it seems that my drivers for my monitor are gone, the computer won't recognize my 10/100 eithernet card and my voodoo 2 3D driver is gone as well as my sound card driver.
To compound joy upon joy I no longer have my windows 98se CD's they decided to join that one sock that escaped from the drier in some time space continuum where intelligently challenged people like myself have no acces... Read more

A:Where Oh where has my Monitor/Modem/Drivers gone???

Well......

I guess you're not having the best of luck, huh?

How (if I may ask) do you acquire this system? I'm assuming that it came fully loaded, and that your sound, video, and ethernet card came loaded with the system. If this is the case, then I'll also assume that you were not given the software CD's or floppies that contain the drivers for your hardware.
You'll probably have to go to the websites of the manufacturer's of your equipment, and enter your hardware model numbers into a driver search. If you can tell us the exact models of your cards, then we can probably point you in the right direction.
As for the Win98 CD, try asking around if anybody has a copy that you could borrow. Failing that, you could start kissing the butts of your IT guys at work. They might take pity on you and let you "borrow" a copy.
 

2 more replies
Answer Match 40.32%

I just reinstalled XP on my computer, and I was previously using a Optiquest (Viewsonic) widescreen monitor. A used the included disc to reinstall the drivers after I reinstalled windows, and the software is unable to configure the drivers. The installer automatically opens a text file which tells me to open the hardware manager and open the "+" next to the Monitor. I don't seem to have a monitor on the list, and I'm not sure what to do. The correct screen size is not available from the display properties tab, presumably because I haven't configured it properly. Any ideas?

Thanks!
 

A:Cannot install monitor drivers....

Ethan88 said:

I just reinstalled XP on my computer, and I was previously using a Optiquest (Viewsonic) widescreen monitor. A used the included disc to reinstall the drivers after I reinstalled windows, and the software is unable to configure the drivers. The installer automatically opens a text file which tells me to open the hardware manager and open the "+" next to the Monitor. I don't seem to have a monitor on the list, and I'm not sure what to do. The correct screen size is not available from the display properties tab, presumably because I haven't configured it properly. Any ideas?

Thanks!Click to expand...

Hi Ethan.
Viewsonic is plug & play so once connected should self install and work.
Check it out here. Start / Control panel / Administrative tools / Computer management /Device Manager /Your Viewsonic should show up there.The disks that come with Viewsonic can be a little temperamental, Widows as all the viewsonic updates click onto windows updates use the custom setting and run,then in the left panel choose hardware updates.you will probably see the viewsonic latest update there and any more you may need for your PC.
Good luck
Rex
 

1 more replies
Answer Match 40.32%

I can not find the video and monitor drivers for a hp pavilion 4533. Can any one find the drivers for me?
 

A:video & monitor drivers

try this link click here
 

1 more replies
Answer Match 40.32%

Hey, im a gamer and i must have my 120 hz on my crt but im bottle necked by this annoying 85 hz... I have a DELL M992 monitor and my drivers are outdated for 32bit and im on a 64bit windows 7, i read a guide where you can modify your .inf file so it reads it. The inf was 32 bit but i think im doing it wrong can anyone help me out... This is the link to my drivers (multiple files) Drivers and Downloads

Heres the .inf file:
;================================
;M992.INF 03/27/02 Ver. 1.0 PCC
;Copyright 1996-2002 Dell Computer Corporation
;
;This is a setupfile for M992
;
;================================
;
;------------------------------------------------
[Version]
signature="$CHICAGO$"
Class=Monitor
ClassGuid={4D36E96E-E325-11CE-BFC1-08002BE10318}
Provider=%Dell%
CatalogFile=M992.cat
DriverVer=03/27/2002, 1.0

;-------------------------------------------------
[ControlFlags]
ExcludeFromSelect.nt=Monitor\DEL300E

[DestinationDirs]
DefaultDestDir=11
M992.CopyFiles=23

[SourceDisksNames]
1=%DISK%,,,

[SourceDisksFiles]
M992.icm=1
; Manufacturers
;-------------------------------------------------
[Manufacturer]
%DELL%=DELL,NTx86,NTAMD64

; Manufacturer sections
;-------------------------------------------------
[DELL.NTamd64]
%M992%=M992.Install.NTamd64, Monitor\DEL300E

; Install Sections
;-------------------------------------------------

[M992.Install]
DelReg=DEL_CURRENT_REG
AddReg=M992.AddReg, 1600, DPMS
CopyFiles=M992.CopyFiles

... Read more

A:Modifying monitor drivers HELP! :(

In my personal opinion, gamer to gamer.
Unless you ant to destroy 1 or more of three things, The os, video card or the monitor itself.
I wouldn't play with drivers. Leave it to the pros. You may be able to find a third party driver that would work though

9 more replies
Answer Match 40.32%

My system is Win XP Home Edition SP3 and up to date. I have just bought and installed a new monitor an AOC 2436Pwa. I switched off my PC, plugged in the VGA cable at both ends and attached the power cable. Started PC and I have sound and vision, I inserted the Installation CD that came with the monitor and read through the various instructions. I went to install the driver on the disc and followed the instructions but when I am asked to choose the drive for the disc Windows tells me that there isn't anything there. Even when I browse to the disc drive I get the same result. Windows seems to be using the same plug and play driver as was used for my previous two monitors for this new one. Two questions, is it neccessary/better to install the drivers which came with the monitor instruction disc or and will it have any advantages or should I just leave it as it is?.

A:New Monitor Drivers won't install.

I have never had to use a montior driver. If it's not broke, don't fix it.

2 more replies
Answer Match 40.32%

Ever since I put on a new version of xp the display on the monitor flips when I scoll, as if with each scroll a new page appears. It is not a smooth steady scroll. I have been told that I need video drivers. My monitor is a 17in StarLogic. Is this true? If so where I can get them? franklingreen.

A:[RESOLVED] monitor drivers

Hello and Welcome to TSF

Lets get some info first.

Please elaborate on "put on a new version of xp ",
What do you mean by this?

19 more replies
Answer Match 40.32%

Hey ALL ! Hope every1 is well !?!? Got new MOBO+Processor last week. Now i`m rebuilding drivers. Ckekd monitor driver+ seems I have two drivers working under DEVICE MANAGER. Default Monitor + the one thats only supposed to be there- Samsung Samtron 75E(M) (PLUS)/75V . Which of these are operating my monitor? And i tried remove the DEFAULT MONITOR to only have it reinstall on reboot. How can be sure my SAMSUNG is PRIMARY driver? Plz HELP ? Thanks in advance folks! Later Dean
 

A:Two Monitor drivers? -98se

Well, if you only use one monitor and it is working then there is no problem, the Samsung monitor is the primary and it seems the only one running. Your video card likely supports dual monitors or TV out and that's why there ae two entries. Monitor drivers are also generally not that important, most people run with the default driver, it is the video card driver that is important - it is what sends the picture to the screen.
 

1 more replies
Answer Match 40.32%

I've been doing OK with the driver issues in Vista x64 but have run into a road block with the monitor drivers.
It's a Viewsonic Graphic Series G220F and I have the Vista x64 driver from View sonic but it doesn't install.
They even know it won't install because at the end of installation there is a pop up telling you how to manually install the driver-which doesn't work either.
Everything installs to C:\Viewsonic. About 50 to 75 .icm files including G220F.icm. obviously the one I need. There are also 11 .inf files, 3 of which contain install info for this monitor. But no mater which .inf I use to install- it can't find another file, G220F.icm I assume, and aborts the install. I can manually point windows to the .inf file but there is no way to point the .inf file to the .icm file.
Can someone tell me how to solve this or is there a universal Vista64 display driver other than the ones with it? 1024x768 is as good as it gets.

A:Monitor Drivers won't install

the drivers for the monitor are usually part of windows and don't need installing
you set the resolution from nview which is part of your nvidia drivers installation
you can access it from the control panel

1 more replies
Answer Match 40.32%

i upgraded from windows 98SE to windows 2000 pro....i now cannot see all of my screen....i have an HP D5259a Pavilion M70 monitor...even doing a google search, i am unable to find a driver for this.....i didn't find one on drivers.com.....does anyone have any clues about where to go to find a driver?
 

A:HP Monitor drivers for win2k

6 more replies
Answer Match 40.32%

Having an issue with my monitor.
(i should not i have been using this monitor for a long time with this comp...i think it came unpluged and that caused the problem)
It is on all during start up but as soon as windows loads the monitor goes to stand by and i have a blank screen.

I tried to start it in safe mode(how do you do that anyways....i have to turn it off during start up for it to get the menu) and it works fine. this leads me to believe it is the video driver.

I read the trouble shooting on how to instale a new moniter driver but in safe mode there is no "drivers" tab.

Any help would be great.

PS

i am having an issue with safe mode. it enter safe mode and some text scrolls.
more than a page of multi(0)rdisk(0)partition(1)\windows\system32\driv ers\mup.sys
is the last line and it freezes there...not sure what that is all about but i can no longer enter safe mode.....

i'm really up a creek..plz help
 

A:Monitor problem..maybe drivers?

7 more replies
Answer Match 40.32%

My monitor has been acting funny lately...when i would press the power button for my PC, the monitor wouldnt come on until i restarted the computer about 5 times. Then when it was on sometimes the monitor would turn funny and then it would restart automatically. Im running windows xp.
Im using a Compaq MV740 on NVIDIA TNT2 Model 64 Pro.

<Category name="Display">
<Data>
<Item><![CDATA[Name]]></Item>
<Value><![CDATA[NVIDIA RIVA TNT2 Model 64 Pro]]></Value>
</Data>
<Data>
<Item><![CDATA[PNP Device ID]]></Item>
<Value><![CDATA[PCI\VEN_10DE&DEV_002D&SUBSYS_001710DE&REV_15\4&DFB3C15&0&2808]]></Value>
</Data>
<Data>
<Item><![CDATA[Adapter Type]]></Item>
<Value><![CDATA[RIVA TNT2 Model 64/Model 64 Pro, NVIDIA compatible]]></Value>
</Data>
<Data>
<Item><![CDATA[Adapter Description]]></Item>
<Value><![CDATA[NVIDIA RIVA TNT2 Model 64 Pro]]></Value>
</Data>
<Data>
<Item><![CDATA[Adapter RAM]]></Item>
<Value><![CDATA[16.00 MB (16,777,216 bytes)]]></Value>
</Data>
<Data>
<Item><![CDATA[Installed Drivers]]></Item>
<Value><![CDATA[nv4_disp.dll]]></Value>
</Data>
<Data>
<Item><![CDATA[Driver Version]]></Item>
<Value><![CDATA[6.14.10.4523... Read more

A:Problems with my monitor/drivers

8 more replies
Answer Match 40.32%

I have a plug and play monitor, model number ADV-172 REV A. I was hoping if someone could help identify the make, so I could see if there were any drivers available for better performance etc. Any help would be appreciated as this has been niggling me for months.
 

A:I need to identify a monitor for drivers

Hello and welcome to Techspot.

Your monitor is an Advent ADV-172. It is a cheap plug and play monitor, and therefore wont have any drivers available.

Regards Howard :wave: :wave:
 

2 more replies
Answer Match 40.32%

Hey Guys, I just bought a HP Pavillon desktop with a W1907 19 inch flat panel monitor. I've been using it for a couple of days and everytime that I turn it on a dialog box pops up stating that software has been detected. This software is the device drivers for the monitor, and it asks me if I would like to install them. But when I try to install them, an error message states simply that the installation failed due to an error. It doesn't even tell me what the error was! All it says is to go to the site of the company that made the monitor for support. So I go to the HP website, and try to download the driver from there. Lo and behold, it won't install AGAIN! It says it failed to install because an error occured. I cannot tell you how frustrated I am that this unit is ALREADY having problems, and that HP won't tell me what the error is! So can someone out there please help me?
 

A:Can't install drivers for my monitor

Have you tried going to the Event Viewer and check to see if there was a log of this error created?

Right click on My Computer > Manage > Event Viewer.
 

1 more replies