Tech Problem Aggregator

nvidia riva tnt2 model 64/model 64 pro update wanted

Q: nvidia riva tnt2 model 64/model 64 pro update wanted

I have a nvidia riva tnt2 model 64/model 64 pro pci bus videocard.
The other day I bought the follow up of MOH (sorry forgot the name because returning it to the store)but ofcource you already see the problem rightaway:error log file of the game told me the card was missing out on some functions.Can this card be updated so "heavy duty games won't be a problem in the future?(il2/fb-wolvenstein-cfs2 run good though!)

Thanx for listening!

A: nvidia riva tnt2 model 64/model 64 pro update wanted can get the latest drivers for the card, but it won't help that much, because it's a TNT2...and PCI....

If you wanted to play newer games, you'd have to get a new video card....but if you're running a PCI video card right now, then it may not be worth it...check if you have an AGP slot, is should be above the PCI slots on the motherboard, and slightly offset from them...if you have an AGP slot, then that's good, because you could get a good video card...but if you don't, you'll probably be better off getting a whole new system rather than just upgrading the video.

1 more replies
Answer Match 133.5%

NVIDIA RIVA TNT2 Model 64/Model 64 Pro PROBLEM..

i saw something about this in another thread but can't find it
anyway my 32mg card only shows 16mg
the other thread listed a driver that worked for one member and i have the same driver...doesn't seem to work for me
is there a dialog or setting...?

A:NVIDIA RIVA TNT2 Model 64/Model 64 Pro ONLY SHOWS 16MG

16 more replies
Answer Match 132.3%

I have the Nvidia Riva TNT2 Model 64 / Model 64 pro video card and i want to install a game but the video card has to be in 256 color mode and in Windows i can only go to 32 bit what can i do? Any comments or posts would be great! Thank YOU!

A:Nvidia Riva TNT2 Model 64 / Model 64 pro Problem?

Just to be clear, 32-bit is actually 16,777,216 colors, so its much more then 256 which is just 256 colors. So for 256 you need to lower the color depth not increase it.

1 more replies
Answer Match 121.8%

can anyone tell me where i caqn get the latest drivers for this
as i cant play my game i just bought i think i need my graphics
card to be use open gl or something

A:Nvidia Riva Tnt2 Model 64

12 more replies
Answer Match 120.6%

So i got this free computer without a hard drive to run a bot on, I got the hard drive and now i cant do anything because of this video card it came with. Its a nvidia riva tnt2 model64/model 64 pro. Iv looked everywhere to download the driver but i cant find anything. Im running windows xp on the computer and when i tried the nvidia site it said it cant find the hardware, when i tried some other site, it said the download was meant onlt for windows xp x64. is there anywhere i can get this driver for windows xp and if so, where can i find it?

A:Nvidia riva tnt2 model 64 driver

Does the motherboard have on-board video too? If so, use the on-board video until you get the TNT Riva driver sorted

1 more replies
Answer Match 120.6%

I recently reformatted my computer's harddrive, and I've been working on getting everything back to it's normal working order. I'm having issues with my video card. It should be installed correctly, I haven't taken it out at all, and it worked a while before the reformat. I think I have the correct driver installed (This one).

But when I plug the monitor into the video card's plug, the monitor won't show anything, it's just blank with the little light, normally green, glowing orange. When I go to the System Information, the only video card that shows up is the one on the motherboard.

Am I using the correct driver? Any other possible solutions?

A:nVidia Riva TNT2 Model 64 issues

G'day Redalert95, I gather you have onboard video and that is working but your card is not. It is not a good idea to plug video leads if the machine is running, it could quite easily kill something.
It is possible that you may need to disable the onboard video in BIOS to allow the daughter card to operate.
This makes it odd that it may have changed from previous settings which were apparently working OK.
If this might be correct it may be pertinent to replace the battery at this time before going any further.
Your board manual BIOS settings should help determine what is happening. In some machines if you plug in a video card the onboard is automatically disabled, but your note does not infer this to be the case, therefore it seems you are going to have to carefully follow the BIOS set instructons in the manual. You likely have an onboard enable somewhere. The LED showing orange instead of green simply indicates no information is being received by the monitor.
You should not need any driver to be loaded to give your card operation for the monitor to operate in a basic mode.
The proper driver will only give the thing all the colours and abilities you are used to normally seeing.
Be extremely careful and ensure the power lead is removed anytime you plug items like cards, and ensure your follow antistatic rules.
Cheers, qldit.

1 more replies
Answer Match 119.4%

Hi, i just wanna know,
what is nvidia riva tnt2 model 64 latest driver?

A:what is Nvidia riva tnt2 model 64 latest driver?

Start here :

3 more replies
Answer Match 89.7%

I am running a Vista Home Premium PC with a 32MB Nvidia Riva TNT2 video card.
I can't update the drivers for the card from any driver install pack I can find. I cant do it with Windows XP, either. Can someone help, so I can get the best out of my old card?

HP Vectra VL420 DT
Intel Pentium 4 1.59 GHz
767 MB RAM
32 bit Windows Vista Home Premium

A:Nvidia Riva TNT2 update drivers

Support for TNT2 ended quite some time ago. I'm surprised you can even make a TNT2 work with Vista at all. Even for XP you have to go into the legacy drivers and download one of the older drivers that still includes TNT2 support from the nvidia website.

2 more replies
Answer Match 78.3%

I have an NVidia Riva TNT2 32MB AGP 4X card in my IBM PC300PL. I have drivers that came with Win2k for it, but they are not DirectX compatible. I went to get the drivers for it from NVidia's site, but when it unzips them and attempts to install them, it says that there aren't any compatible cards in my sytstem. Any Ideas?


A:Solved: NVidia Riva TNT2

8 more replies
Answer Match 78.3%

I'm putting a new motherboard in my PC (Asrock p4v88) and in the instructions for the board is a note (do not use a 3.3v AGP on the AGP slot of this board). I hope to fit my old video card into the new mthbrd, it is a NVIDIA RIVA TNT2 64 PRO. I haven't a clue what the voltage is of my video card. Can I fit this old card in or do I go out and purchase a new video card of a known voltage?

Thank you
Donald Ashton

A:Need The Voltage Of My Nvidia Riva Tnt2 64 Pro

I don't recommend using that card in that machine. Not only is there a risk of it damaging the slot, it's also an incredibly old and slow card, if your new motherboard has onboard video it is likely faster than that TNT2-M64.

1 more replies
Answer Match 108.36%

I continue to get intermittent screen messages that I have a problem with my Nvidia graphics driver, occasionally causing shut downs and generating error messages to microsoft.
Although possibly completely unrelated, I also find that my computer shuts down on its own if left alone about 30 minutes, and when turned back on, goes through an odd reboot on its own whcih returns me to where I was before leaving.
The microsoft proposed solution is to download a new driver off the Nvidia website though they also say Nvidia has no solution to the problem. When I go to the Nvidia website, I can find a downloadable driver for XP. ( , though the instructions request me to:
1- disable download accelerator utilities ( How do I find if I have any? I recall loading one at one time, but can't remember if it was on this computer, or find anything suggesting this on my start menu)
2-turn off my virus protection- can do
3- remove Nvidia display drivers from the control panel using the add/remove function.- I can't find any. However, I do find reference to them in my systems folder listing a TNT2 nmodel V dated 4/7/04. It seems odd that I have a listing in the latter, but not in the former. It also seems odd that they would request the removal of the old one first. Will my monitor work if its removed??
Thanks for any assistance

A:Updating Nvidia Riva TNT2 driver

d/l and save the driver to the desk top
in the device manager uninstall the card
reboot tapping f8 and choose vga mode
when windows finishes booting and reinstalling the card
disable a/virus
install your drivers
reboot the computer

2 more replies
Answer Match 108.36%

If you are still using this old video card in your Windows XP desktop(like I am in one of mine), the NVIDIA ForceWare 61.77 and 66.93 drivers are the ones that you want to install and use. If you try to install and use the 71.84, 71.89, or newer versions, they will NOT install. I have done some experimenting and have confirmed this.


A:For Those Who Are Still Using A NVIDIA Riva TNT2 64 Video Card

16 more replies
Answer Match 108.36%

i can't even bet a boot with a nvidia riva tnt2 model 64 w/8mb ram on a MainBoard TXpro-II or a knock-off replica thereof. funny thing is: the card workes fine in another comp with a diff mobo (this one, a spearfish with a xeon 450 pentium 2) and to add to insult, a couple of old junk video cards WILL work in the TX-proII. i also have an Aopen socket 7 mobo i could use for this system but the exact same story applies: the junk video cards work in it but not the tnt2 card which i just bought. by junk video cards i mean they have bad memory chips on them and they have garbage mixed in the on-screen display which makes them kind of useless except for getting a system to boot at all. if it matters they both have S3virge chips on them. running win98 fully updated with ie 5.5 also fully updated. have the latest nvidia drivers avail but of course haven't gotten that far. i did, however remove all the old drivers from device manager and found no nVidia references in the registry to delete at all. any clues would be highly appreciated. thanx, JL

A:System won't boot with Nvidia Riva TNT2 64 8Mb

When does your system bang...what message? If it's Windows protection error, you probably need to assign an IRQ to VGA in bios. I had this same problem...see Replacing Video card...steps?" in this forum.

3 more replies
Answer Match 108.36%

Um, this might sound shallow, but where could I find a BIOS upgrade to the NVIDIA Riva TNT2 Pro graphics card?

A:Nvidia Riva TNT2 PRO Bios question

What brand is it? Check the manufacturer's site. It might still be there.

3 more replies
Answer Match 108.36%

Hello Experts,

I have purchased a Graphic card PALIT DAYTONA nVIDIA RIVA TNT2 M64.

I am going to install it in GIGABYTE P4 Titan GA-8IRX, REV: 2.0, DDR RAM, motherboard. This motherboard support only AGP 4x (1.5V) card due to Intel 845 chipset can’t support AGP 2x(3.3V).

nVIDIA RIVA TNT2 M64 card has a jumper port JP1 which is open. Is it AGP 4x mode by default? Or I have to set jumper to make it AGP 4x.

Please suggest me how I install the card in the above-mentioned main board. I am waiting for your advice soonest possible.

Thank you.

Dhaka, Bangladesh

More replies
Answer Match 108.36%


I'm searching for the latest driver for my husband's graphics card which is:
nVidia riva tnt2 model 64

His OS is win98, and he has dirX 9.0.C. I'm TERRIBLE at finding drivers and I was hoping someone might know how to locate this driver. I've been to the site, but as I said, I'm not very knowledgable about drivers, and I ended up very unsure as to what the latest driver for this would be.

Any help would be very appreciated!
Thanks much in advance!

A:Latest driver for nVidia riva tnt2 m64 HELP PLEASE! :)

kelticvixen said:


I'm searching for the latest driver for my husband's graphics card which is:
nVidia riva tnt2 model 64

His OS is win98, and he has dirX 9.0.C. I'm TERRIBLE at finding drivers and I was hoping someone might know how to locate this driver. I've been to the site, but as I said, I'm not very knowledgable about drivers, and I ended up very unsure as to what the latest driver for this would be.

Any help would be very appreciated!
Thanks much in advance!Click to expand...

Here is the file you want:

2 more replies
Answer Match 108.36%

please send me a link where i can get this nvidia riva tnt2 m64 for windows xp sp2

A:latest driver nvidia riva tnt2 m64 please

1 more replies
Answer Match 108.36%


Can anyone assist me how to update my video card to the latest version (if there is). It's a bit old. its a 32mb AGP Nvidia Riva Tnt2/Pro (Microsoft Corp.) driver date is 4/7/2004 version (stated in device manager) I have WIndows XP SP2

Are there freeware that can figure out what is installed and recommend safely which version to update or driver to download so I can reinstall. I can't seem to find the driver cd that came with this video card.



A:Solved: Updating Nvidia Riva Tnt2/Pro

10 more replies
Answer Match 107.1%

do you guys know what my problem could be? my pc hangs/restarts whenever it has to render some 3d graphics, or even when it simply has to use directdraw or direct3d. it even hangs when i press the "test direct3d" button in dxdiag. it even hangs when i use the drawing tools in microsoft word!

i do believe its something to do with directx. the problem is only "solved" when i set my video hardware acceleration to "none". but of course i dont want to have forever sluggish graphics. any suggestions...? btw, i using windozeXP pro.

A:nvidia riva tnt2 problem with directdraw/direct3d

What version on the nvidia detonator drivers are you using?

What version of DirectX do you have installed?

Have you been to Windows Update and installed the necessary updates?

3 more replies
Answer Match 107.1%

I'm using Windows 98SE.

I've downloaded and installed the Nvidia 61.76 video drivers(the most current version for 98SE) for this video card, but it refuses to get out of 16-color, 640 X 480 resolution mode. Every time I start up and Windows loads, an error message appears with the following:

There is a problem with your display settings. The adapter type is incorrect or the current settings do not work with your hardware.

Any suggestions?

A:A Question About Nvidia Riva TNT2 M64 Video Card

If my memory serves me right, I fixed the problem one time by going into Display Props/Settings/Advanced and changing the display adapter. I had to show Windows exactly where the one was, that I wanted to use. It was with a S3 Savage card but maybe it'll work the same with your Nvidia.

2 more replies
Answer Match 107.1%

Now, technically, which graphics card is faster in drawing: the NVidia Riva TNT2 AGP or the INtel 845G PCI? I noticed that the TNT2 has slightly higher framerates.


Do you meant the integrated series? If so, the Riva TNT would be better.

6 more replies
Answer Match 107.1%

I just performed a clean install of windows xp professional edition on a freshly formatted hard disk.
Here is my current hardware configuration:
PIII 500Mhz, 192Mb Ram, 16Mb Riva Tnt 2 Pro Graphics, Asus P3v4x motherboard, creative vibra 128 sound card..

I have a problem with Direct draw. whenever i try to test direct draw thru dxdiag, my screen flickers a few times and the my computer hangs. I have now diabled direct draw acceleration. I have tried the latest Nvidia Detonator xp drivers (2.1.83) as well as the default drivers that came with xp. There is still no difference.

I could use direct draw and direct 3d with the same hardware setup on my previous system, Win ME. All the directx games ran fine there.

Please let me know what the problem is as this is the only glitch in an otherwise impeccable system..

Apurva Mehta

A:{RESOLVED}DirectDraw Problems on Nvidia riva Tnt2

12 more replies
Answer Match 105%

The title says it all - Thanks!

I have a old pc with a 245W PSU and I m thinking about upgrading the card.

A:Anybody know the power requirements of a NVIDIA RIVA TNT2 16mb graphics card?

Couldn't find a quick answer to this but if the "old" machine runs okay as it is then it should have no problem with the TNT2 card. They are a pretty old card and were designed for the machines of the day which (by today's standards) were pretty slow and didn't need a huge amount of power to get them going. I assume the "old" machine has a AGP slot to fit the card into?

3 more replies
Answer Match 104.16%

new to the forum....

searched the web a while no real clues todate

can / has anyone here know of a fix ???

what has happened and what i have done todate

tried to load w2k pro with tnt 2 card in no joy passed install s/w saying setup is installing windows 2000 (or something like that).

pulled card out installed via onboard video card (install a snap).

thought i´d try again to get tnt 2 card to work now w2k was installed.
put card into pci slot #3 auto detect found it upon startup all is fine.

checked driver (default MS driver).

restarted pc, turned onboard video option off, pc starts again starts good.

Goes no further than the windows 2000 screen with @ 18 blue dashes that go across a wee bar. system just sits there.

turn pc off and on.

on initial start bar (B&W) i press F8 select safe mode with network (not that i have a network connected) stops at same place.

again turn off / on pc and change the onboard video card to active.

pc starts win2k starts fine look the net for newer drivers.

got 2 drivers ( called something like ) 66.3 and the other 44.3 (these are the directory names created under Nvidia).

loaded each on in turn same problem as outlined above for both.

from research the card is supported but cannot get the bl**d thing to go.

also tried the card in slots 1 & 2 same results no go with tnt 2 goes with onboard card.

the motherboard does have a vesa slot at the bottom and was wondering _IF_ this could be a cause for the problems ????

new... Read more

More replies
Answer Match 97.86%

Hi. I was wondering...are the TNT and TNT2 drivers interchangeable? I need a Windows 2000 TNT driver, because the one supplied with the OS doesn't have Direct3D support :/...Thanks for your help!

A:RIVA TNT and RIVA TNT2 drivers interchangeable?

My guess, is Yes, they can be used. It definately isn't going to hurt to give it a shot, worst case you just uninstall. TNT2 was just before I began to pay attention to hardware.

2 more replies
Answer Match 93.66%

The title says it all. These are all 32MB cards, and I would like to know the best one and the worst one, any help? Thanks!

A:TNT2, TNT2 Riva and GeForce 2 MX, which is better?

As far as I know, there aren't any difference between TNT2 and Riva TNT2, but there are RIVA TNT2, RIVA TNT2 Vanta, and RIVA TNT2 M64.

Listed from the least to the most powerful:

RIVA TNT2 M64 (16mb card)
GeForce2 MX

For more information about the differences, take a look here...

5 more replies
Answer Match 91.56%

When I connect my Gateway Laptop to my Toshiba TV through the HDMI ports I get no sound or picture. I changed the input port to the HDMI port on the TV. I think it is in the settings of my computer where I need to make a change but I can't find out where. Help!!

Tech Support Guy System Info Utility version
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 64 bit
Processor: AMD Turion(tm) X2 Dual-Core Mobile RM-72, AMD64 Family 17 Model 3 Stepping 1
Processor Count: 2
RAM: 2813 Mb
Graphics Card: ATI Radeon HD 3200 Graphics, 256 Mb
Hard Drives: C: Total - 114115 MB, Free - 4090 MB; D: Total - 114116 MB, Free - 111336 MB;
Motherboard: Gateway,
Antivirus: CyberDefender Internet Security, Updated: Yes, On-Demand Scanner: Enabled

A:Connecting Gateway Notebook Model MD2614U to my Toshiba 46" TV Model 46XV645U

8 more replies
Answer Match 91.14%

i broke my dell xps 12 model 9Q23 lcd screen and i've been searching high and low for a replacement screen but to no avail. I have however found a replacement lcd screen for dell xps model 9Q33, from a quick google search, they both look similar to one another but with different specs.
So i was wondering if i purchased replacement lcd screen for model 9Q33, would it work on model 9Q23?


A:Does dell xps 12 model 9Q33 lcd screen would work with xps 12 model 9Q23?

According to, the LCDs for one don't work with the other despite the similarity in design of the two systems.
There are some places showing screens for the earlier 9Q23 in stock.

1 more replies
Answer Match 88.2%

This scanner ran with Pagis 3.0 without any problems at one time. Since my system crashed and HDD was repartitioned and formatted, i can't boot up with scanner on. The driver that came with cd works for a while but it will hang up when i reboot. I tried the newest driver for scanner which does not work at all.
There are no conflicts in device manager and it does recognized scanner by name and model when using driver version " MiraScan V3.20". Anyone have any ideas how to deal with this problem.

OS-Win 95 OSR2
CPU-Celeron 300A
M/B-Abit BH6
Video-Diamond Stealth II S220

More replies
Answer Match 86.94%

Hi, In my PC I have an Nvidia GeForce GTS250 1GB, I am looking at getting a new game 'King Arthur Fallen Champions', the sys req says recomended GPU is a 9800 GT 512MB. I have read in the web that some GTS250's are rebranded 9800's, this leads me to believe that the two cards are on par as far as performance? Am I correct, will my GTS250 have any issues running this game?


A:Nvidia old and new model comparison help please.

If I recall corrctly, the GTS250 is actually just slightly faster than the 9800GT.
Granted, its not by very much.

While that game does need the GPU power, its also more of a CPU heavy game.
But I think you'll be fine with your E8400.

The game isn't nearly as demanding as TW Empire for example.

Have you played the K.A Games before?
I can tell you right now, if you absolutely hate games like Rome Total War, you probably will not like it. If you do enjoy those type of games youll have fun with it.
They are much like a Total War game, only with RP elements. Its set up a bit different, but sorta has that TW gameplay feel to it.
I like it myself , but its not everyones cup of tea.

If you didnt realize, thats a stand alone expansion. Theres also the main game itself (King Arthur the Role Playing War Game)
I do not have the stand alone expansion myself, but I would guess that the full game may have more content.. not 100% sure though.

At any count, I think youll be fine.
You may not be able to have all settings at MAX, like view distances on a battlefield, but you should be able to play the game well.
Your system exceeds the Min requirement, and much closer to recommended.

3 more replies
Answer Match 85.68%

My wife's has a 3D Blaster RIVA TNT2 vedio card and I am trying to get some updated drivers, I am getting 404 messages on every web site I try. Can someone give me a link to find up to date driver?


A:3D Blaster RIVA TNT2

have you tried downloading the drivers on the NVidia website.
the beauty of NVidia cards are they only need "One Driver to Rule Them All" meaning the detonator drivers on the website are capable of supporting even the older Riva 128 to the Riva TNT to TNT2 up to the smooth power of GeForce 3! pretty cool and convenient huh? anyway here is the URL for the latest detonator drivers.

2 more replies
Answer Match 84.84%

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i7-3770S CPU @ 3.10GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 8
RAM: 16320 Mb
Graphics Card: NVIDIA GeForce 610M, 1024 Mb
Hard Drives: C: Total - 1886773 MB, Free - 1770178 MB; D: Total - 19087 MB, Free - 2337 MB; F: Total - 305242 MB, Free - 42756 MB;
Motherboard: Hewlett-Packard, 2ADC
Antivirus: Norton Security Suite, Updated and Enabled

The software I use almost exclusively is Microsoft Word, InDeSign and PhotoShop. I don't do any gaming. I do watch movies, either Netflix or insert my own dvds.

My computer is crashing with greater and greater regularity. How can it be fixed so it doesn't do this? Sometimes the screen basically "blips" and I get this message: Displaay driver NVIDIA windows kernel mode driver version 327.02 stopped responding and has successfully recovered. Other times the screen freezes and I can't do anything until I unplug the computer from the wall, plug it back in, and push the start button on the top of my monitor.

Today the screen "blipped" at least a dozen times, and completely crashed three times, all within less than 18 hours: 7am to 2:30 am.

Please tell me what to do, and please know I am no techy, so in basic English, please.



More replies
Answer Match 81.48%

I recently upgraded my laptop to NVIDIA Graphics Driver Rev E and all the games below crashed on startup. World of Warcraft.RiftEverquest 2. I had to roll back NVIDIA Graphics Driver to older version Rev.C to get the games above to work again.Can kindly revised and test the NVIDIA Graphics Driver Rev E to work for the games above please?

A:Omen Laptop model 15-5007TX LATEST Nvidia Graphics card driv...

HP Engineers (who do not work here on the Forum) will update drivers in due time. Not much we can do to speed it up. 

1 more replies
Answer Match 78.54%

When installing drivers after a retail XP install on a Sony Vaio this error message comes up:

"this update is not intended for use with your computer model"

So do this:

1) Goto C:\Documents and Setting\?Your profile Name? \Local settings\ temp and clear out all the files, you will need to leave this open to get to the drivers.

2) Goto your ?windows? folder and look for a file called ?Model.txt? (if by some chance its not there, run the install drivers you just downloaded and it will be created. What sony does is assign Model #s to each driver you down load and then when you start the install it will check the a chip on the Laptop mainboard for you model ? it will then put that model in the ?Model.txt? file.

3) Now this is how I get the Sony drivers/apps I need: open the ?Model.txt? file, replace your Model # with the Model number you pulled drivers off of. leave your ?windows? folder open and in view.

4) Start the installer (pause now) go back to the Model.txt? file open it and your ?Model? is back, change it again and save.

5) Go back to the installer and continue, watch the temp directory (which should still be open) and what will happen is the installer will attempt to install the drivers by 1st extracting the drivers to your temp directory (pay attention to that folder C:\Documents and Setting\?Your profile Name? \Local settings\ temp, so you can copy all files out of there to use later) but after that will most not install the driver ? or it might look l... Read more

More replies
Answer Match 77.7%

Good Morning, I have a HP Pavilion dv4-1120br, I know this HP notebook model is old, but i've instaled the Windows 10 64bits on my machine and saw that my BIOS is version F.30 and the last one available from the HP website is F.66 A. The problem is this model doesn't have suport for Windows 10 because, like i said, is too old. Can I download and run the BIOS update for Windows 7 64 bits available from the website, or do I need to downgrade my OS to Windows 7, update the BIOS and then upgrade it again to Windows 10? Thanks for the help! 

A:Doubts about the BIOS update for my model with the current O...

Cantarino Hello;Allow me to welcome you to the HP forums!Your second guess is correct -- as the BIOS updates on the HP site are OS version-specific and if you try to run the one for Win7 in Win10,it will refuse to run.Good Luck

1 more replies
Answer Match 76.86%

I want to download a Users Guide and check for newer drivers for this laptop, but the model number area is worn off on the bottom. I can see the Service Tag number, but there doesn't seem to be anyway to use it to find my model number.

A:Model Number Worn Off, How Do I Find Model Number

Hi, Shut down the notebook.  Tap away at the esc key as soon as you start the notebook to enter the Start-up Menu, then select f10 to enter the Bios Menu. The first tab should list both the Model No. and Product No. - enter either on the link below. Regards, DP-K

1 more replies
Answer Match 76.86%

Every time I run the Intel Driver Update Utility it tells me I need to go to HP to make sure my graphics card is up to date as it is not a generic Intel driver. Problem being, when it auto detects my model it never has the #ABA at the end. The laptop in the photo looks different from mine, and the only graphics driver available for it is NVIDIA, which I do not have. How do I find the proper Intel driver for my laptop?

A:Can't find specific model G6U46UA#ABA under any update lists

It is actually an m7-k010dx model number.  Have you tried this driver? Also, the Windows 8.1 driver from this page should work, too:

1 more replies
Answer Match 76.86%

OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) D CPU 3.00GHz, Intel64 Family 15 Model 6 Stepping 5
Processor Count: 2
RAM: 3199 Mb
Graphics Card: AMD Radeon HD 6450, 1024 Mb
Hard Drives: C: Total - 133168 MB, Free - 78555 MB; F: Total - 204798 MB, Free - 26432 MB; G: Total - 204798 MB, Free - 32779 MB; J: Total - 217529 MB, Free - 75059 MB; K: Total - 326736 MB, Free - 9357 MB;
Motherboard: MSI, MS-7267, 4.0, To be filled by O.E.M.
Antivirus: avast! Antivirus, Updated and Enabled

Bought my PC around 6 yrs back, and with time I upgraded it accordingly(RAM from 512 mb to 4 Gb, HDD from 160 Gb to 1 TB, 1GB gfx Card and few more).Now I feel the need to update the BIOS to adjust my MB accordingly with the new hardware.The model number printed on my MB is 945GCM5 V2, MSI 7267 V4.2.
When I googled it I found this: v2&type=product
and this :
But ist one got me confused, and didnt know which model is mine and 2nd one is not v2.

I would really appreciate if someone points me in right direction.

A:Solved: Need to detect Motherboard Model for BIOS update !

11 more replies
Answer Match 76.86%

I believe that I need to update the BIOS on this 13-a110dx HP Pavillion x360 notebook (purchased June 2015) - of course out of warranty. On HP Support page, this is what shows for the model number/product number/serial number of my computer Operating Sys:  Windows 10 (64 bit)Version:F.35 Rev.A, May 08, 2016, sp77025.exe, 17.6 MB HOWEVER,down in the details, I see another version F.34 Rev.A 17.6 MB Jun 20, 2016 WHICH ONE DO I CHOOSE? This all started with an erroneous SYSTEM 90b error message"System fan/cooling error"Fan has been cleaned, serviced, and checked and it's running fine. Still get error periodically and have to do a hard reset or just hit enter to get through the message.  I noticed on support forum that I may need BIOS update so I checked and my BIOS is from 2014.?! Hoping that the BIOS update will fix this erroneous error. 

More replies
Answer Match 74.34%

My newly bought laptop has various issues including:
1. Not waking from sleep mode
2. Unable to adjust brightness
3. BSOD on Windows 8.1 x64
All latest drivers and Windows updates have been installed. The BIOS file <<;> was downloaded from:
Please refer to the attached screenshots of the error.

A:VARIOUS Problems - Unable to Update BIOS on Inspiron 15 - 3542 - Dummy Model Error

Have there been any resolution of this problem? I downloaded all the availiable BIOSes for my Inspiron 3543 and I allways get the same error (DummyModel) when trying to update it. I've been trying to locate the source of some issues and the BIOS is the last thing to be updated! My PC is still on A01.

3 more replies
Answer Match 69.3%

Does anybody know what is the last driver of NVIDIA that supported RIVA TNT 1 (16MB)

A:Nvidia Riva Tnt

you can find one there.

3 more replies
Answer Match 68.46%

Recently I bought this new v.card and can't play any games(like Urban Chaos, Age of Empires 2). I just start the game and it automatically exits in a few seconds. Sometimes it does start but then after some time of playing it exits again and the comp. crashes('hangs'). I could play these games with my old card though!
I have already downloaded the latest drivers and really don't know what to do else. Could it be that these games don't 'know' this card and don't want to work with it or what?

A:Nvidia Riva TNT 2 Pro problems...

some tnt2 ultras have voltage problems with the agp supply on older motherboards. Not sure which chip the pro uses but if it's the ultra then this could be the problem.

2 more replies
Answer Match 68.46%

I'm new to the computer world and looking to upgrade my video card. I have a P2mmx at 300mhz w/ 256mb. & I'm running xp home. I was wondering if the gforce 4mx 420 is better than my currant nvidia riva tnt And if it is compatable with my computer?

A:What's better? nvidia riva tnt or gforce 4mx 420?

A Quick Question...

I'm new to the computer world & looking to upgrade my video card. I have a P2mmx at 300mhz w/256mb, on a Intel I440LX &
i'm running XP home. I was wondering if the gforce 4mx 420 is better that the nvidia riva tnt. And if it's compatable with my computer?

4 more replies
Answer Match 68.46%

This is an interesting move. So those running 7 and 8, how do you feel about this move?

What Microsoft won't be doing after October, however, is shipping the individual hotfixes any more. Fixes will only be available through the Monthly Rollup or security-only update. This means that the ability to pick and choose individual fixes to apply will be removed; they'll be distributed and deployed as a singular all-or-nothing proposition. Microsoft argues that this will improve patch and system reliability.Click to expand...

Windows 7, 8.1 moving to Windows 10?s cumulative update model

More replies
Answer Match 68.04%

I recently bought a TNT2 card. I installed , downloaded the lateset drivers from the nvidia website (41.xx) and ran it on my WinME system.Problem is when the computer starts ,before the BIOS and memory check, the amount of memory shown is 32 MB.While in Windows the driver shows only 16 MB (display properties-advanced-nvidia TNT2 Model 64). I had purchasd the card with 32 MB. So does this mean that in Windows only 16 MB is used ? How can I correct this error ?


A:Nvidia TNT2 M64

some of your ram might be should pickup the whole thing or not at all.I have a tnt pro 2 with 32mb.
try removing it puting your old card back in restart then shut down and put the tnt back in and make sure it is in evenly and firmly pushed in if it's not you could have problems.and then restart again.reinstall the drivers.
All internal work must be done with power off.
if you changed from pci to agp make sure that enabled is set in the BIO for AGP. It should work but it is a little finiky if it wasn't pushed in just leave the case off untill you get it right because you might have to remove it a few times untill you get it right. good luck

3 more replies
Answer Match 68.04%

does anyone have this card? if so , can you look at it and see if it has a fan? mine only has a heatsink and someone told me that its supposed to have a fan. could this be the reason why my computer locks up when i play intensive games or watch videos?

A:nVidia TNT2 M64

i have one and it has no fan although it seriously needs one!!!!!!!!

1 more replies
Answer Match 68.04%

I have an Elitegroup motherboard with SiS620 chipset, and I've installed a pci nvidia tnt2 m64, but now lockups occur in 3d games, and sometimes in the Windows GUI.

Sometimes alt+ctrl+del will get me out of it in the GUI; it gives me a blue "system busy" screen and then I can click cancel on the close program dialog and everything's fine.

Sometimes it stays locked when I hit alt+ctrl+del, and it always stays locked in games.

I'm running the detonator 5.13 beta drivers, which are said to tbe the most stable. I have tried the latest drivers (12.xx), but with those the problem is worse because once it locks alt+ctrl+del never works, and the lockups are more frequent.

I've tried adjusting latency timing, looked for conflicts and tested power settings and everything seems fine... what could be the problem?


A:nvidia tnt2 m64

Wondering how you disabled your sis chip, this from the sis web site about adding pci card to a 620 system

If you add on a PCI VGA card on a AGP/Super AGP VGA based board (like 5600+6326, 530, 620), you
will need to set up the display priority. Every board maker has her way to do the setting. Some of them will implement
it in the BIOS, in the item "Integrated Peripheral","Initial Display First", you can choose "PCI slot". However some other
makers do the setting by jumpers, you need to refer to your manual or contact the makers for further help. The best
solution is to ask help from your board maker. However if you don't know who the maker is, you can track from the
store where you buy the computer, or ask any local pc dealer if they know there's a way to help you. After you
finish the hardware part, you can remove the our vga driver from your system. Please go to "Control
Panel","Add/Delete programs" to remove the driver. Please don't care about the exclamation mark that appears in the
Device Manager, if you have already install your second card successfully. It won't influence your VGA display.

2 more replies
Answer Match 67.62%

My video display has a terrible flutter that is getting worse. I am worse than a novice about drivers/driver updating and bios updating. I've done research on updating drivers, but get nowhere. My display driver for my Dell with Windows XP Pro is NVIDIA RIVA TNT2 Model 64Pro (4.07.02).
Does my problem lie with my driver, bios, or what?
Any help would be greatly appreciated!

A:NVIDIA RIVA Driver Problem or Something Else?

8 more replies
Answer Match 67.2%

Hey, guys. What NVIDIA driver (Detonator or Forceware) should I use under Windows ME with a Riva TNT2 Pro to get the best quality and performance? I am asking this because I noticed that (under RPGMaker 2000), using the original Windows drivers showed no flicker. But, when I used the 45.23 drivers, sure they were fast in Direct3D applications. But in RPGMaker, flicker starts to appear. It's not so bad that it is unplayable, it's just really annoying. THANKS IN ADVANCE!


You should use ancient Detonators. Something in the 1x or 2x series maybe.

4 more replies
Answer Match 66.78%

Hi people

im having trouble with a riva 128 zx card. i originally had a 64 tnt card and replaced it with the 128 but now my pc wont recognise either of them. the computer turns on fine but the monitor is not responding to either cards. both the monitors are fine, cables etc but they wont respond to the cards. i tested the 64 on another pc and its working fine, but my main pc wont accept them.

ive got a p4 1.6 ghz
256 mb ram
and other typical stuff but i can seem to figure out any obvious things that are causing this to happen.

You'd probably need more info than that so just ask but i can't remember EXACTLY whats in the pc. I can't look at the specs because no monitor will work.

any help would be great, this is driving me mad

A:nVidia RIVA 128zx-monitors won't recognise

6 more replies
Answer Match 66.78%

I've installed TOCA 2 and I can't get past the "setup" page. The page reads as follows:

NVIDIA RIVA TNT2 Model 64/ Model 64 Pro

Version No.

The game manual says I need or a later version.

I've downloaded the latest drivers from NVIDIA, but I still have the same problem. Can anybody help please??


8 more replies
Answer Match 66.78%

I have recently built a cheap machine for my son to play BF1942 on. IT has a problem with the graphics card and say that windows will have to shut down to stop any damage being done. It says its the graphics card drivers but i can't sort it out. Any ideas anyone

More replies
Answer Match 66.36%


At the moment I have in my machine a Voodoo3 2000 PCI. I havejust received off a friend a nVidia Riva TNT2 M64.

Which one is better for 3d gaming?

also if anyone knows how much memory does this card hold??


A:Voodoo3 2000 VS nVidia TNT2 M64

Also....if I do use the TNT2 what do i run my games in (UT) openGL or D3D?

(I have heard that OpenGL on TNT2 cards is dodgy?!?!)


12 more replies
Answer Match 66.36%

i have a nvidia riva tnt2 model 64 card and a 15" NEC LCD monitor

i have these horizontal lines running across my screen that are like 'shadows'. like when im using microsoft word, or typing in any white textbox, there are horizontal lines that run from the text across the screen.

i've tried uninstalling/re-installing drivers a million times, changing refresh rates, making sure the card is plugged in and all cables are secure, etc. i also know it isnt the monitor because it works perfectly on my roommates computer. i also made sure to properly clean out old drivers before changing them.

any help would be appreciated!

A:Nvidia Tnt2 Vid Card Problems

This sounds as thought the card is faulty. Try it in your mates machine and see what happens.

1 more replies
Answer Match 66.36%

I have a Compaq Presario 5000 (5WV373) that had Windows ME and was working properly. I just formated the computer and installed Win 2K as a default installation. Everything is working properly but the Nvidia card. I couldn't install it. I only have 16 colors, 800x600.
This Nvidia card came within the Compaq and I lost all the installation CDs so I was at and I download the "56.72 winxp nVIDIA DRIVER" but it doesn't work. I execute it but when it finish nothing happened, the driver is not installed, the Nvidia card doesn't work.
I would appreciate any help to make this card work!!!!!

Thanks in Advance.

Please respond with copy to [email protected]

A:I Can't install my Nvidia TNT2 M64 PRO 16MB in W2K

You'll need to download the riva drivers, not the geforce ones. Uninstall the geforce drivers BEFORE you install the rivas.
EDIT:I am wrong. I used to have a TNT card but it was years ago. Sorry.

3 more replies
Answer Match 66.36%

I usually have OpenGL display problems with programs running fullscreen (usually blurry text in menus, etc.), for example the image attached is from OpenGL Extension Viewer (I captured it from the test window), I have the most up to date drivers and software, any ideas?

Nvidia Tnt2 32mb (53.03 winxp drivers)

A:OpenGL + Nvidia Tnt2 Troubles

You should try an older driver - the new ones have issues.

Try an early 40 driver or even the oldest one they have:

The driver should be listed in Add/Remove Programs.

1 more replies
Answer Match 66.36%

What chipset is better(faster) ?
NVIDIA TNT2 or GeForce 2Ě×-200

If you could buy at the same price these two video cards
1.) SVGA ( Chipset : NVIDIA GeForce 2MX-200) 64MB AGP R TV-OUT
2.) SVGA ( Chipset : NVIDIA TNT2 M64) 32MB AGP R

what would you choose ??

A:GeForce 2ĂŚĂ—-200 Vs NVIDIA TNT2

I'd go for the GF2 mate

1 more replies
Answer Match 66.36%

Here's the deal: I have a piece of software called Gigastudio which conflicts severely with my TNT2. I wonder if perhaps instead of replacing the card, an alternate set of drivers would be an option. The only graphics stipulation is that it needs to be 16 bit in order for me to run Cubase. Thanks a bunch!
P.S. Here is the exact brand name of the card.

Nvidia TNT2 M64 32MB 4X AGP

A:Alternate drivers for Nvidia TNT2?

16 more replies
Answer Match 65.94%

Is there anyway for me to run World of Warcraft on an unsupported Video Card (NVidIA TNT2) without spending money on a new card? I spent fifty dollars on the game and now I"m stuck! Help?>??

A:Please help me- Video Card/Driver NVidia TNT2- WoW

you could always return the game. have you actually tried the game, and seen it fail. if so, you'll need a newer video card.

5 more replies
Answer Match 65.94%

OS Dual boot WIN98SE/WIN2K
384MB Ram

OK, here goes. I have a 32MB Nvidia TNT2 Ultra video card. However MOST of the time, the system won't recognize it as anything other than a standard VGA card. Every now and then it'll actually show as the correct card and when that happens it works GREAT (for a while), then all the sudden it's back to standard VGA again.

This happens in 98SE and 2K, I have 2 older Rage cards that I have no trouble with. Unfortunately I DON'T have another machine that I can put this card in right now.

Have all the latest drivers (that I can find) for everything, problem has persisted through a reformat and reload.

Any help at all appreciated.

(edited for spelling)

A:NVIDIA TNT2 Ultra shows as standard VGA

If your system is not HAVING issues with your other cards, then your TNT2 is the cause.... its an odd problem you have.

1 more replies
Answer Match 65.94%

Hi Guys,

First time here and I'm more desperate than a virgin on his wedding day. I just purchased Rainbow Six 3: Raven Shield (hoping to split a few wigs today). I found out that it does not support my video card (gulp!) Is there a patch or anything that I can do besides buying a new video card?


A:Raven Shield vs. Nvidia TNT2 Pro AGP Card

Unless someone has made a third-party patch that somehow simulates hardware T&L, then no, I'm afraid the only way to get it to work is by getting a newer video card.

2 more replies
Answer Match 65.1%

Video Lock-ups / CD-ROM Locking problem

CPU Information

Asus A7A266Mother board with audio & AMD 1.2 GHz Processor combo,
256MB/133 Ram chip,
NVIDIA Riva TNT 2 32MB M64 APG video card.
Fujitsu 30 gig HD Re-formatted with a clean copy of Win 98se installed
50X speed CD-ROM
HP 9100i CDR
Two Kingston NIC’s
Modem supplied with Mother board
Windows 98se.

I have experienced the following problems:

1. During boot-up, the window’s logo flickers one time every time its booting.
2. The CD-ROM will some times hang and lock the computer.
3. While running NASCAR 4, & Need For Speed. The video blinks out. It’s like the screen freezes and then runs ok. This happens every 3 to 4 seconds. This makes the game unplayable.
4. I have seen when I was using the CD-ROM the CPU locks up and if I open the CD-ROM door the CPU will run again. Close the door and the CPU lock up again.
5. Every time the CPU lock up due to the CD-ROM (Ctrl/Alt/Delete) takes forever and it seems to crash the system so bad I have to hit the reset.
6. I have seen Windows Explorer screen flicker every once and a while.

Trouble shooting steps taken:

1. Installed latest driver for the TNTm64 video card ( Still having the same problem)
2. Installed a Voodoo 3-3000 video card and drivers. ( Still having the same problem)
3. Minimized all the graphic settings in NSACAR 4. Un-checked all items possible to achieve smooth video. ( Still having the same problem)
4. Removed both network cards and modem. ( Still havi... Read more

A:NVIDIA TNT2 M64 lock up problem on ASUS A7A266 MB

What are your irq assignments, any conflicts, what's sharing with what.

Device manager, any conflicts, ms-dos compatabilty mode drivers note, etc.

Anything running in the background to cause a conflict.

Directx diagnostic, any problems reported.

Is your cdrom on the same ide channel as the hard drive, if so change it.

One thing you might try but it's a strech, download sisoft sandra and run the benchmark program, once in awhile it will show a problem and how to fix it. I haven't used it for a long time but it use to have a diagnostic that would check the systme bus, agp bus, etc.

you should be able to get it at

Will keep my eyes open if I run across anything on some of the gaming sites.

1 more replies
Answer Match 65.1%

Hi - I'm new to the boards and have a question I hope someone can help me with. I have an old Dell Dimension 4100 that is running windows me and it has an nvidia tnt 2 video card. My son recently purchased Call of Duty and it doesn't seem to work on this system. I keep getting an error message that I need to upgrade my video card. I think I need a pci express card, but I'm not sure so my question is how do I figure that out and can anyone recommend a video card that is not too expensive? The system is 6 years old and I really don't feel like investing a ton of cash into it. It does have 256 mb of ram, that I know as well as an pentium 3 processor, 20 gig hard drive (small I know in this day and age) and is running @ 933mhz. Thanks in advance for the help.


A:Upgrading an nvidia tnt2 card on an old dell 4100

You need an AGP video card.Given the age of your computer you probably only have an AGP 4x slot so I would recomend an ATI Radeon 9200 or 9250. anything more powerfull than that wouldn't give you any significant improvement due to the speed of your processer and slot. upgradeing your ram to 512 mb wouldnt be a bad idea either.
Video card:


regardless of what video card and ram you get that game will probably only run on medium settings due to your processer.

ps:If you would like to upgrade your HDD:

7 more replies
Answer Match 64.68%

Title says it all.

Any info about how to do it, such as :

1. software needed
2. cooling need + how to fit it
(3. Possible 3D Mark score)

Also I have a Winfast Geforce 2 MX 100/200. Any similar info about clocking that would also be appreciated.

The computer that runs my TNT2 is a custom made PC. It has an Abit KT7A Raid, 256 MB of Ram and a 1200Mhz unclocked Thunderbird AMD. The card on it at the moment on gets a score of 700 in my 3D Mark tests.

The computer that runs on my Geforce 2 is a Dan computer with a Pentium 1.5 Ghz with 256 mb of ram and a new 845 chipset motherboard. This graphics card gets just under 1000 points at the moment in my 3D Mark tests.

Thanks for any info!

A:Any Info/Suggestions on nVidia Riva TNT M64 32mb graphics card overclocking?

mx overclocking guide

Will look around for the m64 but I don't think it will get you much, your scores seem low but I haven't run the bench for quite awhile and don't remember what I got with a ddr

downloaded it just for chuckles 2512 at default settings.
P3 [email protected], 512 PC133 cl2 ram, Prophet DDr

2 more replies
Answer Match 63.42%

I found a core 2 duo processor at my local computer thrift store for $20 so I decided I'd go ahead and buy it. But I can't seem to find out what the model is. The writing on the front says

Intel '05
Intel Core 2 Duo
6400 SL919 MALAY

Thank you for any help. I truly appreciate it.

A:Not sure what the model is

7 more replies
Answer Match 63.42%

Yea umm I need help getting information about the OSI model being used with the Operating Systems out there Linux, Mac, and Windows. I can't find any information at all. Any help?

A:OSI model

16 more replies
Answer Match 63.42%

Hi Folks,

I have two Dell DIMs 8300. One has 1Gb and 40GB HD ATA and the other 512Kb RAM & 120Gb SATA HD. Is it possible for me to remove RAM from a slot in the 40GB and insert it into an available socket on the mobo to increase the RAM in the 120Gb without causing problems?

(ESD precaution would be taken into account of course)



A:RAM from one PC (same model) to another

Sure its possible, if it actually USES the same type of ram. The worst it should do is fail to post correctly. ESD ommitting of course

4 more replies
Answer Match 63.42%

I'm helping a less-technical friend with an issue on her older Thinkpad, which she was given by a boss.  Before I ask any specific questions though, I obviously need to know which model she has so that I can post to the right category. I'm not very familiar with Thinkpads myself so forgive my questions. (I have looked in the FAQ but didn't see what I need there.)
I asked her the model number and she found this on the computer:
Type 2373 - 7CU S/N [deleted for privacy]
I googled a bit but Type 2373 does not appear to be a model number because I've found T40, T41 and T42 (at least) that all indicate Type 2373. T40, T41 and T42 are model numbers, right? How do I get the model number from the information I've provided? Or do I need more information, like a serial number? I'll be seeing her tomorrow and can gather anything I need at that point. She says the laptop has an IBM logo, not a Lenovo logo, so I assume this is a fairly old model, dating back before IBM sold off its PC hardware business.
Also, may I suggest that determining what model you have should be added to the FAQ? It seems like a very fundamental thing that you absolutely have to know to get any further information.
Also, may I request that this post NOT be moved to a more appropriate place (if there is one) until I've had a chance to read the answer to my question, otherwise I may not find it. I'll acknowledge the answer when I see it so you know it's safe to move it to the p... Read more

A:What model do I have?

The Lenovo Support website indicates this was the factory configuration for the system:
ThinkPad T40 (2373-7CU)
P M 1.5GHz, 256MB RAM, 40GB 5400rpm HDD, 14.1 XGA(1024x768) TFT LCD, 32MB ATI Radeon 7500, 16x10x24x/8x CD-RW/DVD(slim), Modem(CDC), Ethernet(LOM), Wireless upgradeable, Secure Chip(TCPA), UltraNav, 6 cell battery, WinXP Pro

9 more replies
Answer Match 63.42%

How do I find out specifically what kind of cpu i have? it's an amd athlon thunderbird 1.2 ghz. I need to know the code after it like: Axxxx AMT3B/1.75V.

A:CPU model?

"" look around thares a program in thare to help you,, i think its called "CPUinfo"

1 more replies
Answer Match 63.42%

i m unable to  identif the model name of my hp, externally as well as internally. will u please tell me the model name of my hp laptop. 

A:model name

Hi, The product page for your notebook is on the following link. The specification page is on the link below. Regards, DP-K

1 more replies
Answer Match 63.42%

Just need help figure it out what model of
IBM laptop i got here. Showing some images...
I know this kinda old.
Thanks kindly!

A:IBM on what model help?

Flip the laptop over and check the bottom for the model number.

-- Andy

19 more replies
Answer Match 63.42%

I had a post on here talking about my computer failing, finding out it was the vcard, i am looking for another. My card is a evga 7800GTX 256 (model 528). Can i use a model 525 (said to be clocked 20Mhz lower)? They are both the same GPUs, and some sites says that it doesnt matter as long as the gpus are the same, but what can i expect with the small speed difference? Would they both have to operate at 430MHz? or should i try to overclock the lesser one?

A:about sli (using same gpu, different model)

Last I read from nVidia, they had to be the same exact card, that may have changed though. I thought I had seen a thread here that said they had changed it so they could be different but with a performance decrease..............I can't seem to find that thread though.

3 more replies
Answer Match 63.42%


I am looking for a freeware program which would allow me to convert BMP (or jpg, png, etc) to 3D-Models.


More replies
Answer Match 63.42%

I have a HP G62 Notebook   ,how do I know which model it is a1 or a2

A:How do I know which model I have

@psychosid? Open a cmd prompt as Admin type on the command line:wmic computersystem get Model  Help:Run a Command as Administrator from the Windows Run Box (Any Version) ORDownload and run a program likeBelarc Advisor-- LOTS of information, including the computer model... When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Fixed / Answered? Click that post Accept as Solution to help others find Answers.

1 more replies
Answer Match 63.42%

I got this camera last christmas and I lost my cord.
No one seems to have a cord and DXG wont respond to my emails.
Please tell me what kind of cord I need so I can look on eBay.

Inside of where the cord goes looks like this: ....

Here is what it looks like from the outside:

The bottom one btw.

Thank you in advance.
If you need anymore information just ask.

A:DXG Model 568 Help

8 more replies
Answer Match 62.58%

I couldn't find  the E560 EV20S01J00 model name on the  PSREF  page . Where  I can  find  correct  information about  this  model.Thanks. 

More replies
Answer Match 62.58%

I have owned my Aspire R5-471T laptop for about 4 days.   It appears to work just great except for 1 quirk.  It intermittently disconnects itself from my home network (other computer devices in the house do not do this).  It takes an adapter reset (through selecting troubleshooting) to reconnect.   any ideas?

Go to Solution.


If you still have problems...... Make sure you have the latest firmware on the ASUS router.  Go to ASUS website and search for firmware for your router model.  After you flash latest firmware...reset ASUS to factory defaults by pressing and holding the reset button for more than 5 seconds.  And then reconfigure it manually from scratch.  Don't try to restore previous settings.  It's best to use as many of the default router settings as possible unless you really know what you're doing. Delete (forget) the old wireless profiles on your computers.  And then restart your computers.  And then reconnect. And if you're still having problems after that........ 1.  Disable IPv6 on the ASUS router2.  Unplug the ASUS, your modem, and any access points from the electrical outlet.3.  Power down all of your computers.4.  Plug in ASUS. modem, and access points.5. Turn on computers.6.  After everything is working ok for 48 hours, enable IPv6 on the ASUS. I had something similar happen on a different computer model, and it was due to me tinkering with IPv6.  

View solution in original post

9 more replies
Answer Match 62.58%

Hi, i have been using Flash for a while now and i was starting to think about making 3d things instead. I would like an easy to use one that has the power to look pretty cool. If anyone could recommend me some programs i would be greatful.

Hope to hear from you guys

A:I need a 3D model program.

I recommend 3d Max if you are using Windows, if it is a Mac go w/ Maya.

4 more replies
Answer Match 62.58%

I have installed pos ready 7 on my system.But i have a problem with a device i cannot get networkcontroller installed.I have tried al 7 network drivers on the hp site.Can someone help me.

More replies
Answer Match 62.58%

I have 4 yr old Medion desktop with model number PC MT7. I tried restarting recently and it says "Windows could not start because the following file is missing or corrupt:
<Windows root>\system32\hal.dll.
Please re-install a copy of the above file."
I searched through the internet and followed some solutions to a similar problem posted by some body but it didn't work. So i poped in the Medion system recovery cdto recover the system and driver files but i get the following error message "Warning: cannot open swap file c:\cwsdpmi.swp" and so the recovery disc didn't help.
Then it started CauseWay DOS Extender v3.49 but then says "CauseWay error 09 : unrecoverable exception. Program terminated" the it said "The master boot code has NOT been updated"
The computer then restarts and then freezes on "Detecting IDE drives.... "
Can someone help me here. I'm not very good on computers. Thank you.

A:Medion Model: PC MT7

It is possible that your hard drive is faulty, download Seatools for Windows to a CD then run the tests,

if the drive is OK and I presume you have access to another XP machine then you can create a Windows installation disk and reinstall XP,

then hopefully you can recover your drivers from the Medion CD - if not you should find them here:

1 more replies
Answer Match 62.58%

Hello people.
I'm selling my old pc, and a possible buyer has asked me what my CPU Model number is, where do i find this?

My PC is a HP Pavillion p6565uk


A:CPU Model Number

Click on
Type in Search
Click "Yes" when it prompts.


Download and install Speccy:
Speccy - System Information - Free Download

They show all your specs

2 more replies
Answer Match 62.58%

Maybe someone out there can help me. My OfficeJet 600 shows error message of "insert black ink cartridge" - I installed a new cartridge - but message still comes on - cannot send any faxes or use the printer, etc. Any idea what this could be? Thanks.

A:OfficeJet Model 600

Did you take off the foil print head cover prior to installing it? You might also want to try running the print head alignment and cleaning utility.

1 more replies
Answer Match 62.58%

Was wondering if someone could help me find a good OSI Model image with each layer showing what layer each device supports. One with images of the devices next to their pertaining layer if that makes sense.

I'm studying for this Internetworking with TCP/IP course and I want to make a big poster and hang this on the wall so I can see it everyday. It will help me remember the best. I've found sever images of the OSI Model via google images, but none showing their supporting devices.

A:OSI Model Poster

7 more replies
Answer Match 62.58%

I've PCG-4B1P but ther are not exist in support. What happen?

More replies
Answer Match 62.58%

I'm using a Toshiba Satellite laptop. I was given it by my company, and now, 10 months later, they want to make a log of everyone's hardware so they want the model number of the laptop. But I can't find it! The book that came with it is about the 1800 series, but which one I have specifically I just don't know. I've looked in system info and tried finding it in dos and with the "find" function....I'm at a loss. Can anyone help? Thanks.

A:Where is the model information?

9 more replies
Answer Match 62.58%

So the title pretty much explains it. I'm running in 64 bit but i cant seem to find 64 bit drivers for it or evidence that they even exist. Please help. Thanks

A:Need 64 Bit Drivers for Model: DX-SC5.1

By it i mean Dynex® 5.1-Channel PCI Sound Card the model number is in the title. Thanks

1 more replies
Answer Match 62.58%

Look for opinion on this brand and model PC

CyberpowerPC Gamer Xtreme 1502 (GX1502) Desktop PCIntel Core i7 5820K (3.30GHz) 8GB DDR4 1TB HDD 120GB SSD Windows 8.1 64-bit -

ASUS G30AB-US001S Desktop PC Intel Core i7 4770K (3.50GHz) 16GB DDR3 1TB HDD Windows 8.1 64-Bit -

Which feel is better, knowing top is better processor, but for brands

A:Thoughts on this model PC

I like Newegg

32 more replies
Answer Match 62.58%

Tech Support Guy System Info Utility version
OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 4
RAM: 8181 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 320 Mb
Hard Drives: C: Total - 939857 MB, Free - 776493 MB; D: Total - 14009 MB, Free - 2246 MB;
Motherboard: PEGATRON CORPORATION, Benicia, 1.01, MS1C96R45002326
Antivirus: PC Tools AntiVirus Free, Updated and Enabled

I have been getting a message saying that a driver failed when trying to play games. The games I play are WoW, and trying to play cos:s, cod black ops, ect. This is the only time it happens. I tried updating my drivers and currently have the newest. The error message I get is igfx driver has recovered from a failure. I am looking at getting a new video card to fix the problem. Will this fix the problem?

The card I have been looking at is:

Power Supply:

I don't know if these are compatible to my computer, because I don't know how to check, any help would be great! Thanks!

A:Hp Model: p6140f

11 more replies
Answer Match 62.58%

What is my WiFI model for this laptop plz help

More replies
Answer Match 62.58%

can someone explain to me what is system model in dxdiag in xp is? thank you guys

A:system model?!

7 more replies
Answer Match 62.58%


im studing osi model and created this challenge , could interleaving process instead application on application layer ?
said process interleaving application , the layer of model increases , why ?

other question

how can estimate frame size on social network for example how whats app estimate frame size in transport

More replies