Tech Problem Aggregator

Compaq Presario 700 and battery

Q: Compaq Presario 700 and battery

i have a question...a while ago my Presario battery died -- it wouldn't charge or discharge, the laptop could only work on the AC, but the indicator showed the correct % of the charge... I bought a new battery and it worked fine for a week, but I decided to reinstall Windows XP, and from then on, it's been a rollercoaster ride for me (( First, it worked fine, but the laptop started to freeze every 20 minutes. I followed the COmpaq's people advice and updated BIOS for some battery controller thing and updated the video driver. From then on, the problems with my new battery just started to overwhelm me First, the battery wouldn't charge when the laptop was ON. Then somehow it did charge. I decided to calibrate it, and now it doesnt want to charge -- on or off. The red light indicating the battery is flashing -- as it's not charging, and the indicator says "0" % of course.
Does anyone have any ideas?? Please? This only started after I reinstalled the Windows, so I am sure it's not hardware or the battery, everything worked just fine ((
Please help me!!!! Thanks... I'm desperate....

A: Compaq Presario 700 and battery

6 more replies
Answer Match 79.8%

I am trying to confirm the appearance of the cmos battery in a compaq presarion 1200xl-111 notebook. At the location shown in the manual is a socketed item that looks like an old single transistor. Approx 3/8" (10mm) . It has no markings for voltage, and despite the fact that compaq support says to remove the battery to reset the password, it is not in the parts list?

When I look up a replacement, at a battery site which has photo's,it shows a standard 3.3 v watch type battery as the replacement. If it is a replacement it must have prongs on the back to insert. I have tried gently to remove it, but it will require more force to remove than I want to apply without checking to be certain it is the component.

Sorry to be so wordy, but did want to give full history. Familar with desktop units, but new to laptops.

Thanks for any assistance.

WKR
 

A:cmos battery on compaq presario

I have never heard of a cmos battery in that configuration. I personally doubt that is the battery. I would think it would be one of the standard 3.3v round button cells about the size of a quarter.
 

2 more replies
Answer Match 78.96%

The OEM 12-cell's no longer available for my old but trusty Compaq Presario V2000.

I see lots of "OEM-equivalents" but many look sketchy.

I really don't want to toast my laptop with a dud battery.

Any recommended vendors or sources?
 

A:OEM-equivalent battery for Compaq Presario V2000?

Try www.batteriesplus.com Had pretty good luck with them.
 

2 more replies
Answer Match 78.96%

I have an old Compaq Presario 1070 laptop, running Windows 98. It hasn't been used for many years, I want to revive it to run piano lessons via its MIDI port. Running on AC, LCD shows AC connection, green power light comes on, but it will not boot. I'm certain the CMOS battery is dead(referenced to be a CR1220, 3v cell). WHERE IS IT? and how do you access the battery. Thankyou.
 

A:Compaq Presario 1070 CMOS battery

It should still boot and give you an error even with a dead CMOS battery, not always but in most cases.

The battery may be located under a panel on the bottom or in the battery compartment. Actually have you tried booting with the battery removed?
 

1 more replies
Answer Match 78.96%

I need to replace the CMOS battery on the motherboard of my Compaq Presario 1200 Laptop. Does anyone have instructions on opening the case to access the battery?
I have been able to get the case open enough to access the Hard Drive but can't figure out how to get all of the way to the battery which, I believe, is very near the back of the unit under the hinges to the screen.
If I were able to remove the screen, I might be able to get that part of the case apart.
Suggestions please,
Thanks,
Pilithigh
 

A:Compaq Presario Laptop CMOS Battery

13 more replies
Answer Match 78.96%

Upon starting my laptop, I get a message that the system has detected the storage capacity of the primary internal battery is very low and needs to be replaced. No important programs load and the desktop loads normal brightness until I move the cursor and the brightness fades to very low. I have to admit that yesterday, I accidently spilled about 3 tablespoons of lemonade onto the lower right hand side of the keyboard. Everything seemed fine until about an hour later, when the pages of any internet site seemed to scroll down by themselves and I couldn't control with the "page up button"......kept scrolling down. Then when I went to my Vanguard account screen and tried to type in my user name, with the last 3 digits of 627, what kept appearing was 6267. everytime I tried.
Then on an MSNBC site, I was watching a replay of one of their programs and their video program has it's own volume button.
Everytime I tried to raise the volume, it went down on it's own. It wasn't until this morning that when I turned on the lap top, most of the task bar was empty and the screen would fade. I took the back panels off to look for that "internal battery" but couldnt see it.
Research on the internet keeps directing me to the large detachable battery on the back but this battery has proven to be good.
If I take that battery out and just try using only the power cord, I still get the same bad results mentioned above.
I think I narrowed it down to the "... Read more

More replies
Answer Match 78.96%

The normal battery that came with the laptop is 10.8v 4090mah. However, the battery is now weak and I'm looking to replace it. But the replacement battery I found has a bigger capacity ? 6600mah 11.1v. I want to know if its safe for my laptop, because many people from Google search results said its okay if its 11.1v, and some online store sellers also said it's okay to use 11.1v replacement for a 10.8v battery.Please let me hear your opinions.

More replies
Answer Match 78.12%

Hi!

I own a Compaq Presario 1247 laptop (AMD K6II/400MHz, 2.2V, 160 MB RAM, 30GB HDD, 24x CDROM, model number 1456VQLIN, 3 or 4 years old I think...), and the darn thing won't power on. I gave it to my sis and it came back dead. She had taken it to compusa I believe, where the guy told her to replace the battery. When I plug it into the wall socket, the LED to indicate it's plugged in comes on, but the one that indicates the battery is charging doesn't. The battery has a light indicator to say how much charge is in it, and none of the leds come on (0% I guess). Pressing the power button has no effect, whether or not the battery is inserted into its bay. I'd bring it to compusa here, but they charge $140 just to look at the machine... since a battery costs less, I thought I'd try getting a new one first, but it seems strange to me that the computer won't boot when the battery is out of the bay. Am I barking up the wrong tree? Should I be looking for other causes? (fried motherboard, maybe, I dunno?) Thanks mucho for any help at all (or even sympathy )!

- FaxData
 

A:Dead laptop - bad battery? Compaq Presario 1247

13 more replies
Answer Match 78.12%

Help! How does one open a Presario 1070 Laptop (circa 1996, "1000 series", Pentium 133MHz) to get at the RTC battery?
...acellier
 

A:Compaq Presario 1070 Laptop CMOS battery

Well I know my laptop RTC battery is in the same place as my memory just need to take out 4 screws out a bottom panel.
 

1 more replies
Answer Match 78.12%

I can't seem to locate the internal battery on my Compaq Presario can57. Can anyone please help

A:location of CMOS battery on my compaq presario cq57?

@mmtreece? When asked for the password just hit enter 3 times. Post the halt code. Sorry did not need to remove the CMOS battery. REO

2 more replies
Answer Match 78.12%

I have a Compaq Presario 2200 model laptop.

I have an issue where every time by laptop batter discharges the time clock resets. I believe that this is realated to the bios battery. I have taken the laptop appart properly via guide provided on compaq website. This is the maintenance guide with all the spare part numbers listed. However, this laptop is out of warranty.

My problem is that I cannot locate the bios battery anywhere on the board. Could someone with some experience pleae review the diagram for this model and tell me where the battery is?


Thanks,
Darmin
 

A:Presario 2200 Compaq - CMOS/BIOS battery?

First of all.

Have you tried to calibrate the battery by BIOS? < This might help a lot of problems.

Second

Have you updated your BIOS ?
 

2 more replies
Answer Match 77.28%

Is it possible to install the battery into a Compaq Presario 1210 yourself? I am very mechanically inclined but have never opened a laptop...
thanks, Dan
 

A:Installing internal battery into a Compaq Presario 1210 Laptop..is this possible?

Since all laptops already come with a battery in them, I don't understand your question.
 

1 more replies
Answer Match 65.1%

Hi, My Computer a Compaq Presario SR1810NX with Windows XP Home Edition SP2 is having an issue with it wont get past the Compaq Logo Screen, like, I press the power button the PC powers on, Fan Speeds up and then slows down as normal, keyboard lights flash as normal and the Compaq Logo along with the v3.48 and ESC = Boot Menu options appear on screen, the things is that it wont get past this screen, it just sits there at the Compaq screen, the keyboard and mouse dont seem to be interacting with the PC since I press ESC or F10 for boot mode or system recovery but the PC wont answer at all, I've already Disconnected power source unplugged mouse, keyboard all but PC is doing the same thing just sitting at the Compaq Logo Screen, the computer doesnt make any sound at all no beeps or anything, it wont let me access Windows at any time, recent installations well could be that I just installed a Mobile Bandwidth Card just a couple of weeks ago, and also just a few days ago I connected my iPod Shuffle 2nd Gen to the computer and the computer wont recognize it at all, not even charging, I know this might be a virus or malicious software, but my computer has barely connected to the internet in the last weeks (I couldn't pay the Internet and I had to use my friend's Mobile Bandwidth Card I mentioned before) all I did while in Internet with the Mobile Bandwidth was some schoolwork and youtube videos, I need help urgently with this since I have to deliver a very important proyect for scho... Read more

A:Compaq Presario SR1810NX Not Getting Past Compaq Logo Screen

Try a power drain.
1. Unplug power cord
2. Hold power button in for 60 seconds or more then let go
3. Plug in power cord
4. turn on the power and try to boot to setup (BIOS)

If it enters the BIOS then you should be able to just press F5 to reset to defaults and then F10 to save and exit. The PC should work now.

However, if after the power drain you still can not get in the BIOS than there is a MAJOR problem which would require some type of repair.

1 more replies
Answer Match 65.1%

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

1 more replies
Answer Match 64.26%

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista&#8482; Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

14 more replies
Answer Match 58.8%

Ok this might be easy..it might not (COMPAQ M2105)

I ended up replacing my motherboard for a model with more features (SD readers blah blah).

I took it all apart and put it all back with the new board in...now when i go into windows (and even before while booting)...the orange lights would come on for a second...then beging to flicker

while in windows...it just will either not charge the battery..or flicker from AC to battery

i CAN power the unit on with the battery alone, and i CAN power the unit with the cord alone...

lastly, my old motherboard (which had a HD connector problem)...still WILL charge the battery...so i'm sure its not the battery...i don't think...

i also dont' think its the AC adapter since it is the same piece I used on both motherboards.....

what to do................
 

A:compaq M2105 laptop - battery will not charge, flickers from AC/battery

Hopefully you are experienced in working on and repairing laptops/notebooks... and you carefully handeled the replacement motherboard and didn't damage it. Repairing laptops takes considerable skill and caution.

It does sound like the "new" motherboard is bad unfortunately. How did you handle the "old" operating system restore to the "new" motherboard?
 

4 more replies
Answer Match 57.12%

ok when i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do. Thanks
 

A:Compaq presario help

16 more replies
Answer Match 57.12%

Hi. Does anyone know if a Compaq Presario SR1150NX does the display system support component video (Y, Pr, Pb) signal output function? Thanks
 

More replies
Answer Match 57.12%

I friend of mine purchased this Presario in 2004. She hasn't had internet since about 2006, so she hasn't had any of the updates since then. I brought her tower home with me since I have internet to load her updates. We're trying to get it internet ready. When I brought it home last week nothing would open. So yesterday she gave me the system recovery disc. I started with the Standard Recovery, but there were too many files that it couldn't recover. So I then decided to do a full recovery. After the full recovery it was rebooting and it told me that not all the system could reload and I couldn't hit okaybecause it wouldn't read / acknowledge my mouse. So, I unhooked her computer and rehooked mine to see what her alternatives were. I found a website, they wanted to know all the things it wouldn't oload. All I can remember is that it was things that could me downloaded later like: Norton, AOL, Adobe, MSN, and QuickTime.

So, I unhoked mine and rehooked her's up (and booted up my laptop). When her's came back up it's saying: NTLDR is missing Pres Control + Alt +Delete to Restart

My question for you is there anyway I can save her conputer? She doesn't have a lot of funds, being a singe mother of a 7 yr old and I'm just a good friend trying to help her out.

Thank you in advance for any help you can provide

A:Compaq Presario

I decided to see what happened when I ctrl alt delete and then decided to do another recovery. Here's some more info (could not recover errors):
1. C:\WINDOWS\Help\SB\Training\WXPPer\Content\Wave\[email protected]
2. C:\WINDOWS\System32\ntdll.dll
3. C:\WINDOWS\System32\ntkrnlpa.exe
4. C:\WINDOWS\32\dllcache\dinput8.dll
5. C:\Windows\systme32\dllcache\licdll.dll
6. C:\WINDOWS\system32\dllcache\locator.exe
7. C:\WINDOWS\system32\viaservc.dll
9. (Black screen instead of error message)
9. C:\WINDOWS\Installe152ec/msi
10. C:\WINDOWS\Installer\1b2cc.msi

then all of after about 20% a big blue screen with following:
A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. IF this screen appears again, follow these steps:

Check to make sure new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup... Read more

3 more replies
Answer Match 57.12%

I have a compaq presario. I have 2Gig memory. I changed services from ATT to comcast internet. now my pc needs to be wiped clean and set up again but when I got the computer I did not get the discs. how can I do this without discs> it wont open up the internet even though I am connected.

Please help
 

A:compaq presario pc

8 more replies
Answer Match 57.12%

sir, can u help me, i can't fint my driver for compaq presario v3760TU
previously, i used vista home basic but i convert to window seven.. but i can't find my driver in hp/compaq driver web.. plzz help me..
-sory for my english so bad..

A:compaq presario

Were you at this Hp/Compaq download page ?


Software & Driver Downloads Compaq Presario V3760TU Notebook PC - HP Customer Care (United States - English)&

6 more replies
Answer Match 57.12%

How do you open the casing on compaq presario 5304. I don't want to breakit.\

Thanks.
 

A:compaq presario

Link to tell you all about your computer. http://h10025.www1.hp.com/ewfrf/wc/...ry&tool=prodinfoCategory&dlc=en&product=93186
 

1 more replies
Answer Match 57.12%

I have purchased a Compaq Presario 600 with an Athlon XP 2200+ processor. I do not have a copy of Windows XP to wipe it with. Is there any way with the installed XP that I can refresh this system and remove data frome previous owners? Or Can I load Win 98?
 

A:Compaq Presario 600 ??

Compaqs usually have a hidden partition with all the factory loaded software on it in an image format. As long as it does and you can figure out how to access it you could probable do that - but you almost likely need the XP Product key and may need to reactivate XP after the recovery. XP can only be install on one machine at a time - so if they are still using it you are out of luck.

Watch the boot up for any recovery messages or take a trip to www.Compaq.com and look up the info for your make/model.
 

1 more replies
Answer Match 57.12%

How do you access the Bios on a Compac Presario 4110. I keep getting the message 162 Sytems Options not set. 163 Time and Date not set. Having visited Compac they were not a lot of help. Downloading the software recommeded by them was a waste of time, still got the above message. Tried all the usual keystrokes etc no good. Any suggestions would be appreciated.
 

A:Compaq Presario

9 more replies
Answer Match 57.12%

ok I hace a compaq that is all messed up. lets see one day the monitor would not work after a storm. Bought another, For a while the screen would be blue but change back to normal. The pc also would have a hard time starting up after it was in idle. We would do a hard start and for a while that worked. Now when I try to start it it turns on but the monitor says no vga/dvi input. There is also none of the preverable beeps that are supposed to be there so in short (well long)the motherboard is fried? So do I use it as a planter in the yard or is there a way to get it up and running. It runs on XP media center it has a micro ATX form factor motherboard it is also an AMD 64 Anthlon. ram is 256 mb 1Rx16 pc 4200 ddr2 533 mhz. With all that said can I just replace the motherboard and reinstall the reinstallation disks and be up and running? ( if it could only be so easy) What about the cpu. i know many questions here thanks for patients. Please help me. Tina
 

A:compaq presario

does your system have agp or pciex (or even pci) slot free? Is the graphics on board? It sounds like a graphics card problem, even if it is onboard. I'd try a replacement card (even if it's just a pci card) and see what happens...
 

1 more replies
Answer Match 57.12%

my compaq presario cq57 says system disabled 62359871..plz help. thank you











Solved!
View Solution.

A:compaq presario

@sharp66? Enter   73031277

3 more replies
Answer Match 56.7%

Hi Guys,

I am trying to install a Cyberdrive x16x12x40 CD-RW into a Compaq Presario 5000 series PC. If no other device is attached to either the IDE or to the power supply, and if the CD-RW isn't attached to the IDE then power will get to the CD-RW. If the CD-RW is attached to the IDE and/or any other device is attached then no power goes to the CD-RW.

Can anyone shed any light on why this is and how I can fix it.

Cheers
Garth
 

A:Installing CD-RW in Compaq Presario

14 more replies
Answer Match 56.7%

i have apresario 972 its old but good its just a pen. would like to update to a pen.3 or 4 the mother board is a compaq. thats about all i know about it.
 

A:compaq presario 972 how can i update it

Can't be done. It is probably some proprietary motherboard if it's a Pentium. If the motherboard is ATX you might....I said might be able to upgrade to a newer ATX motherboard. You will also need a new Power Supply, processor, memory and possible new graphics adapter.
 

1 more replies
Answer Match 56.7%

I have an Compaq Presario 5724 that I FDisked and reloaded Win98 SE on. There are some components that are not working and I need drivers for. I have been to the Compaq site, but they have 2 or 3 different drivers for all the interfaces.
How can I find out which video, sound, modem are in the thing? Or, do I have to download all of the listed drivers and try them one at a time?
Thanks,
Dave
 

A:Compaq Presario 5724

16 more replies
Answer Match 56.7%

I have a Compaq Presario running xp professional with a phone jack for internet connection(no Ethernet port). I would like to connect it to my att frontier modem that uses cat 5. I bought a j5 jue130 gigabit Ethernet adapter(that has a j45 to usb).I would like to know if this computer is capable of connecting to my service and if so how do I configure my computer. I loaded the correct driver for the adapter but can't get connection.
thanks

A:compaq presario 1200

Hello grafenwohr
Have you looked at using the computer with a wireless connection from your modem ?
 
Check with your Internet Service Provider for setting it as wireless.. Who is your ISP ?
 
Any Good ?

4 more replies
Answer Match 56.7%

the DVD drive stopped working and now the hard drive has errors.

I got an external USB DVD drive on it, but chkdsk cannot seem to repair the hard drive.

Anyone got any idea how to fix it or recover data off of the hard drive. I got a year's worth of work on it, and none of my files show up. Just "File record segment XXXXX is unreadable" errors about a million of them.
 

A:Compaq Presario 2500

Suggest you stop using the drive until you can recover the data.
It is likely that drive has failed or is going into total failure.
You can purchase a replacement drive for $42 to $75 depending on size and whether you get the 5400 rpm or the 7200 rpm in a 40, 60, or 80 GB model.
You can obtain an adapter to put the drive into a desktop unit as a slave. The adapter converts the mobile 2.5" hard drive by adapting the pin set for the desktop EIDE cable. Adapters are available many places, including www.geeks.com, www.cyberguys.com, www.frys.com, www.outpost.com, and others... cheaply at $2.45 to $9.99 depending on where you get one.
Then you can usually drag and drop the data from the mobile drive to a desktop drive, or use drive recovery software, then you can burn a CD to then migrate it to your new drive... or just use a USB transfer.
( We work on a great number of the Presario 2500's with identical problems. Did you know there are 434 different models of the Presario 2500 series of laptops?)
With the new drive, you just use the recovery set that came with your laptop, or buy the set for about $30, including shipping, from the Compaq parts department.
But you likely will not ever be able to use that drive again. Thus, you do not want to stress it further by more restart or rescue attempts.
 

4 more replies
Answer Match 56.7%

Wont turn on at all no lights no nothing any ideas?
Thanks
Perry

A:Compaq presario c300

Compaq Presario C300 General Troubleshooting guide:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00372748&lc=en&cc=us&dlc=&product=3213867&rule=2144&lang=

3 more replies
Answer Match 56.7%

I have a Compaq Presario 7588
serial number: 8011dcw41090
With Pentium III 550Mhz processor I hear that I can up grade the processor to 1100 Mhz but I still need some information a bout the processor like the type of socket and the cache memory and if I can just buy a processor and install it normally without contacting Compaq service
 

A:compaq presario 7588

You'd probably need a Socket 370. I don't think the Tualatin based P3's would work for you. They are the ones with 512k L2 cache. You'd need a regular Coppermine based P3. (256k L2)
 

2 more replies
Answer Match 56.7%

A friend has a Presario X1300. It has a small problem. The power button only works once in a while (perhaps 1 in 20 presses). I thought perhaps it was a cold solder joint but even after touching up the button's pads its still has the problem.

It could be a bad switch, it looked like the switch had previously been replaced (although he hasn't had it serviced except to put in a new hard drive about a month before the switch went bad).

I found a post that indicated that someone found schematics for the motherboard and I was hoping that someone here would be able to point me in the right direction. I didn't find them on google. I'm going to replace the switch first, but if that doesn't work I have to assume there's some other problem that will need debugged.

I hate to see such a nice laptop go to waste because of a stupid power on problem.

I have found the service manual online. Its great, but has no schematics.

Thanks for any ideas you can offer.

Raydude
 

More replies
Answer Match 56.7%

I have an older compaq presario 5000 (5wv260), i want to upgrade the memory in it. I know it takes sdram, 168 pin, but i dont know if i need parity or non-parity. OR ecc or non-ecc... anyone know what this computer takes?
thanks
 

A:compaq presario memory help..

6 more replies
Answer Match 56.7%

I just bought and set up a new computer system, and am now trying to get my old one to boot, so that I can migrate the files needed for the new system. The monitor doesn't come on, and all I'm getting is a fast blinking green light on the tower. I've un/replugged all cables and power cords, and I know the monitor is OK because it belongs to my husband's matching computer, but my old one won't boot.

Help!!!
 

A:Compaq Presario won't boot!

I'm desperate, guys! Is there any other information I can give you to help resolve my problem? I have the Easy Transfer Cable for Vista all ready to go (and the software loaded in the old computer before I disconnected it and moved it to the card table), but I can't get my Compaq to boot.

If you can't help me, I guess I'll take it to Best Buy tomorrow and let the Geek Squad have at it...
 

3 more replies
Answer Match 56.7%

What type of my RAM is cheap but works good for my tyoe of computer. I have no idea what to buy. There are different seriall numbers on the RAM. I am preatty sure I need DDR RAM but is that it?? Let me know plz =) Thankies.
 

A:Compaq Presario 5304 RAM?????

16 more replies
Answer Match 56.7%

Hello - I am attempting to get an old Compaq Presario 9546 that I obtained work correctly. I am, however, at a loss to figure out what the heck is wrong. When you boot the computer, it does the RAM check, and appears to skip past all BIOS functions (I can't go into BIOS setup... it does not exist) and then all it says is "Non system disk, please replace and press any key" - which, BTW, I have no disk in at all. When I DO put in a system floppy, it will boot from the floppy but not aqnowledge that anything else but the floppy is hooked up to the computer (I have 2 hard drives and a CD rom drive - all with the correct jumper settings). Any ideas? If I could just get BIOS to come up, I could probably fix it myself...
 

A:Compaq presario 9546 help

8 more replies
Answer Match 56.7%

i want to upgrade my computer so it can run windows xp and i'm not talking about minimum stuff i want to try and get da best out of windows xp, so wut should i upgrade?
 

A:Compaq Presario EZ2207

8 more replies
Answer Match 56.7%

Appreciate some assistance.

Anyone know how much memory the Compaq Presario EZ 2605 (out of the box) had?

Believe its processor is an Intel Celeron 633MHz.

Trying to help someone out who knows very litttle about computers and cannot tell me how much memory the pc has. (He does not understand how to look up the info in My Computer/Properties, etc.)

Asked Compaq a week ago, but still no answer.
 

A:Compaq Presario EZ 2605

Manufacturer Compaq
Model Presario EZ 2605
Maximum Memory 512MB
Standard Memory 64MB removable
Number of Slots 2 (2 banks of 1)
 

3 more replies
Answer Match 56.7%

hi,

i have one compaq c500,it's some keys are not working.i have to open it,i tried to open but can't , any one can help me.
 

A:compaq presario C500

Hiya and welcome to Tech Support Guy

I've removed your email address, as we reply to the forum, and putting it up may give you spam.

Can you explain a bit more on what you're trying to do? You say open it, do you mean log on?

Regards

eddie
 

1 more replies
Answer Match 56.7%

Appreciate some assistance.

Trying to help a friend with some computer issues. Doing it over the phone. He has a Compaq Presario EZ 2605 pc.

Anyone know of a website where there is an actual picture of what this type of PC looks like? Tried the Compaq site, but have not found a picture. Looking for a picture, and a manual, if possible.
 

A:Compaq Presario EZ 2605

Found a site with photos.

Please close post.
 

1 more replies
Answer Match 56.7%

I have a problem with my laptop screen. The screen is dark, however, the data is still there. Can't turn lamp on, or change anything, but can hook up to a monitor and it works. Can I fix the screen to work again? If I hit the button that turns the screen off and closes the computer down, the picture pops up for a few seconds and it is slightly red.
 

A:Compaq presario R3000

Its most likely that the backlight has failed. It can be fixes but it costs a upwards of $100 to do by a professional. You could try buying the parts online and doing it yourself though if you are technically inclined.

Here's how: http://www.laptoprepair101.com/laptop/2007/12/09/replace-laptop-backlight-ccfl-lamp/
 

1 more replies
Answer Match 56.7%

Original 500GB HDD was showing signs of eminent failure.I successfully cloned the drive to a new 400GB HDD, using NORTON GHOST.(I know this drive is smaller than the original, but less than 30GB was being used on the original)Anyway, The new drive would not boot.Assuming that the problem may be OS license-related, I ordered the Compaq Recovery Discs Set.While waiting for the Recovery Disc Set to arrive, I purchased a Sandisk 120GB SSD.(Again, I know that the 120GB SSD is smaller than the original 500GB HDD that came with the computer, but I do not plan to even fill it 50%.)Anyway, The Recovery Disc Set arrived and I attemted to use it on the new Sandisk 120GB SSD.The process seemed to go fine, all 3 discs of the set seemed to copy, and then the computer restarts and a screen displaying files flying across the screen from one folder to another stays there forever.I waited 15 hours and came back and I still just see:Files flying across the screen, from one folder to another folder.The drive activity light is blinking, but obviously there is a problem. Some possible related facts/information:The SSD is detected in the BIOS.The SSD Checks good, by the BIOS Diagnostics "Smart" Tests.I cannot find anywhere in the BIOS to disable AHCI, it only shows SATA or IDE.Current Bios version is 5.5.5, and I have been unable to find a BIOS Update anywhere.Current Memory (RAM) is 4GB (2x2GB), which was an upgrade since the machine was originally purchased. Can someone p... Read more

A:Compaq Presario SSD Upgrade

Greetings, I use Paragon Professional Disk Imaging software. Try Macrium Reflect free. Disk cloning is also included in the free version. Cheers!

1 more replies
Answer Match 56.7%

I need to completely reformat my compaq presario but have no idea how to format it since it is using vista. help help me do it step by step. thank you.

reen

A:Compaq Presario Vista

1. turn on computer and tap on F11 repeatedly until the Compaq screen disappears
2. click Advanced Options
3. select system recovery (may say restore the computer to factory settings)
and click recover without backing up files, click next

It will do the rest on its own.

Do this with ONLY mouse, keyboard, monitor and power attached. If you added any parts inside other than ram you will need to remove them to ensure it works properly.

Thats all!

2 more replies
Answer Match 56.7%

My laptop wants an administrator password that I don't know. Shows a system disabled code of 91550023. What do I do?

More replies
Answer Match 56.7%

I have a Compaq Presario 1200 laptop that won't come out of hibernation. With either the battery or A/C cable the power on light on the keyboard will come on after the power switch is pressed and a couple of seconds of clicks from the vicinity of the 3 1/2 floppy or the hard drive area but nothing else - no beeps or anything on the screen.
I talked to Tech support (I am out of warranty) and tried their suggestions - removing all power and pressing the power button and then reinserting the battery; turning it off, removing power for 24 hours and then turning it back on.
One suggestion I had from another source was to remove the CMOS battery but I can not figure out how to access that part of the case. I can get to the hard drive but not the battery.
Any suggestions or directions on removing the CMOS battery?
 

More replies
Answer Match 56.7%

I have an old compa presario 1277 who supposedly had something called a monkey virus on it. This virus supposedly wipped out all the drivers. Someone reistalled them. However, my husband insist the monitor display does not look like it did and that it use to play movies. Do you have any suggestions?
 

A:Compaq Presario 1277

Is it this Presario 1277 notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=95012& ?

If so try reinstalling the Trident Display Driver from the available downloads.
 

1 more replies
Answer Match 56.7%

computer will not charge only when it wants to. will not start up the power charge and wireless lights come on and the hdd light does not. black screen and the fan does work. computer was shut down and charged over night the next day it would not start up and screen is black.

A:compaq presario cq60

Without the battery installed and the power adapter plugged in, press and hold down the power button for 10 seconds. Plug in the adapter leave the battery out, does the laptop power up?

Do you get any repeated beeps? Does any fans spin or can you hear any fans running?

2 more replies
Answer Match 56.7%

Recently took some hits on my Compaq Presario 7478 system. Got two or three nasties via the 'Net. After McAfee's virus scan and removal, began experiencing weird happenings, such as system closing down and restarting. Then just not starting. Tried a few remedies [probably inadvisedly], and finally the system seemed to hang on my restore at the same place repeatedly.
Ultimately the system could no longer establish my OS. Restore failed.
Bottom line: Could not invoke computer restore. Could do nothing with this computer.
Q... Being compaq is the BIOS set to a certain condition that would prevent my reformatting the hard drive and restablishing an OS? Is this an option I can override? If I were to piggy-back the existing hard drive onto an operating hard-drive and reformat would that solve this problem and permit me to then create or repair the hard drive subsequently to get my compaq back?
Sorry this is so wordy...
 

A:Compaq Presario dead

Have you tried disabling System Restore; then re-enable for a fresh start?

Failing that, format and install OS per instructions in your manual or the CD which came with your computer. If no CD, the OS should be installed in .cab files in Windows Explorer.

The BIOS should already be properly set
 

3 more replies
Answer Match 56.7%

I have the best luck with computers ever. My brother wanted me to format his oldschool compaq presario 5000 computer so I formatted with the win XP setup disk, when I went to restart to start installing windows after the format it takes me to a blank screen that reads:
"Couldn't open drive multi(0)disk(0)rdisk(0)partition(1) NTLDR: couldn't open drive multi(0)disk(0)rdisk(0)partition(1)"

I have booted with floppy and fdisk, fdisk /mbr, formatted about a million times using FAT and NTFS file systems, I have deleted all partitions, did everythinig I can think of.

Does anyone have any idea of how I might solve this and install windows? I know the HDD isn't shot because I can put it in my other comp and actually do a full win install, but when I place it back in the compaq, it brings me to the same error screen.

Any help would be greatly appreciated. Thanks guys.

one more thing, I am kinda a n00b at this sorta stuff so any ideas please give me the *hold my hand* explination and guide me what to do with step by step instructions, thanks again guys!

A:Compaq Presario problems PLZ HELP!

Check in your BIOS and make sure you have the right HDD displayed. It would be best to set it to auto. Also you could try setting the BIOS back to the default values.

3 more replies
Answer Match 56.7%

Hello! I am attempting to change a 80mm fan in my Compaq computer. The fan I want to change is, I believe, called the CPU fan. It has a lever next to it and 4 screws holding it down. My question is this: Do I have to move the lever on the side of the fan in order to pull the fan up and proceed to remove the screws or do I just remove the 4 screws?  Also, how do I remove the screws considering the awkward position they are in? (I've been working on trying to remove the screws; however, it is difficult to maneuver the screwdriver into the top of the screws to remove them. This is because part of the fan case is above the screws making it necessary to place the screwdriver sideways in order to remove the screws.) Thank you for your response.  

More replies
Answer Match 56.7%

My sister is having major problems with her Compaq Presario CQ57 (running Windows 7). I have been trying to help her with it but, I am about to literally throw it from a very high window. I'm thinking it has a malicious program lerking inside it. I am trying to get it into safe mode and am having a hell of a time. I want to do a scan on it and I believe it is better to be i safe mode.

There is no F8 option so that is out. I tried msconfig and computer says it can't find the file,(by the way it says that to any program I try to install). Since I can't get anything to install and everything I seem to try hits a brick wall I am at a lost on what to do. Every time someone gives me some advice on how to maybe fix this I can't seem to get past the first step!!!HELP!!!! She has only had the computer for a couple of months. This is her first brand new computer and it seems she has made a very bad choice!

The Wireless has already quit working too! Buyer Beware!!! Please can someone please help me out?? I am desperate.

A:Compaq Presario CQ57

How about booting to recovery partition if available to restore to factory condition or system restore?

2 more replies
Answer Match 56.7%

hi everyone my best freind has a compaq presario sr2170nx and ever scince they've had it it would mak a loud noise for hours "like it was dieing and gasping for air" and then it became really slow and would freeze, but now it's to the point it just shuts off. now i think the fan went and the computer just keeps over heating but im haveing and extremy hard time finding the fan that gos to this computer. can anyone help and if u think it's something else pease let me know thank you
 

More replies
Answer Match 56.7%

Hi All

I realise this is possibly not the right room for this, but here goes.

Compaq presario V5000 laptop started giving consistant BSOD on start up, no boot (even safemode possible)

*** STOP 0x000000c2 (0x00000043, 0xDFFE8000, 0x00000000, 0x00000000)

Ran linux did memory and hard drive check, seems ok. Have got all my data off and trying to recover the computer to a working state, but turns out the Compaq recovery DVDs i made invoke windows XP, this of course brings on the blue screen of im at the end of my tether.

Any suggestions, as I havn't got a scratch startable version of windows (as they don't give away them anymore.)


Thanks in advance.

A:Compaq presario recovery

Hi.
ok why can you use your restore cd to boot the the laptop with pressing F11 when booting the laptop,then follow the instruction.

N.B
i also have problem with mind i can not used it anymore because i have accident i lost my restore cd for compaq presario v5000.
can you please copy and send them via my e-mail,[email protected]
if you done mined.

1 more replies
Answer Match 56.7%

I bought a presario 1500 that I had assumed had a problem with green lines that were on the lcd and external monitor. The lady who owned it had taken it apart and sold it to me that way. I bought it today and tested it when I got home. I powered it on and I saw that the fan will move slightly but won't start and the hard drive will start but shuts down after about 5-10 seconds. The power light always stays on but nothing else. I noticed when I unplug the hard drive and battery inverter board(see link) it will shut off the power light. Could that be the problem? I don't see how the motherboard could break when it was never used. Anyone have some advise?

http://cgi.ebay.com/COMPAQ-PRESARIO...ameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting
 

A:Compaq presario won't turn on

This looks like a power supply controller card issue. Also some systems will not run if the CPU fan is not working. You need the battery inverter board in place to power the system and light the light.
 

23 more replies
Answer Match 56.7%

Hello,
I have recently upgrade my OS from Vista to Windows 7 Ultimate by clean install method.
I think so far everything works except microphone which I solved by installing updates from windows update.
So my question is, Should I install some drivers or some updates from either compaq or hp sites or wherever also? Should I try to find drivers specefic for my computer or go with the drivers which came with windows 7?
My computer model is: Compaq Presario CQ61

Thank you very much!!!

A:Compaq Presario cq61

  
Quote: Originally Posted by jav


Hello,
I have recently upgrade my OS from Vista to Windows 7 Ultimate by clean install method.
I think so far everything works except microphone which I solved by installing updates from windows update.
So my question is, Should I install some drivers or some updates from either compaq or hp sites or wherever also? Should I try to find drivers specefic for my computer or go with the drivers which came with windows 7?
My computer model is: Compaq Presario CQ61

Thank you very much!!!



If HP/Compaq have the drivers for your PC, then yes.

4 more replies
Answer Match 56.7%

I am not near this machine, it's 60 miles away, so I can't look myself, but can anyone tell me if this is one of those pieces of junk that has the BIOS on the Hard Drive, or is it on the Mobo (like normal) ?

The person wants me to rebuild it, and I have never rebuilt a PC that has the BIOS on the HD.

What do I need to watch out for ?

What I usually do is FDISK the HD and then Format it, and go from there.........

Compaq Presario 7470
 

A:Compaq Presario 7470

I believe its a normal setup. However, even if its not the compaq partition is hidden. It is either completely invisible to FDISK or its listed under Non-DOS partitions in FDISK. As long as you don't touch that you'll be just fine.
 

2 more replies
Answer Match 56.7%

I bought this compaq presario 1800T from a garage sale and when I first turned it on it took at least 30min. for it to completely boot up and run fine. Cna some tell what to do for it to run faster. Also it has no memory chip and it runs on xp and was designed for ME or 2000.
Im also trying to get internet on it.
Please Help!
 

A:Need Help with compaq presario 1800T

how can it run with no memory? You will at least 1 gb of ram to run XP well. 512mb at the minimum to be acceptable.
Read the upgrading/troubleshooting ram guide in the guides forum before installing ram.

read the speeding up computers/system guide in the guides forum to see how to speed up your system. It is old, so bear in mind it really is only good for office work.

It has a built in telephone modem port and a LAN port for internet.
If you want to go WIFI (wireless) you need to buy a WIFI card for it.
 

1 more replies
Answer Match 56.7%

I was trying to upgrade my brother's Compaq 5340 from Windows 98 to XP. I kept giving me errors on the C: drive but would continue to work in Win98. I moved the valuable files onto another drive and formated C:

Now I cannot install anything on drive C: . None of my Windows installationd discs with work with it.

It keeps saying that there is a compressed file or directory on the drive or that it is write protected.

I booted of A: drive with a Win98 startup disc but cannot access C: drive.

What Is going on? Did I screw something up?
 

A:Compaq Presario 5340

Boot off a floppy disk and FDISK the drive - remove all the partitions and then create a new Active/Primary partition. Also make sure that Antivirus/Bootector protection is off in the BIOS. Then boot off the XP cd and format the drive and do the install. To boot off the CD you need to set thej boot order to CD-ROM, A, HDD in the bios. You can also delete the partition from the XP cd if you boot off it.
 

2 more replies
Answer Match 56.7%

My friend has a Compaq Presario 5340, which I might say is being a real pain! She dropped it off to me yesterday to try to fix.
Here is my problem(s): The computer starts up fine until it gets to the Windows98 screen then it hangs. She had stated it was running slow then this problem has surfaced. I have been in the MSconfig and did a selective startup bypassing the Autoexec and config files, as stated by troubleshooters in Win98. I also have used the quick restore cd's that she has and the same thing still happens, it hangs on Win98 screen.
Does anyone have any suggestions or more troubleshooting to do before I boot it out the door? Also have thought about formatting the hard drive to wipe everything out, but I have heard it is difficult to reload programs on Compaq's. I don't have any idea if she has added any new software or hardware to this computer.
Please Help!!!!
 

A:Compaq Presario 5340: HELP!!!!!

Check the CPU settings in the bios and make sure that the CPU is not running overclocked.
If this is one of those 599lmr motherboard Compaqs, it'll do just what your saying if the CPU is set wrong.
 

3 more replies
Answer Match 56.7%

A mate of mine has just bought himself a Compaq Presario and asked me to give him a hand at getting it up & running so I said I would, (really a classic case of the blind leading the blind). We did get the thing going & connected to ISP so miracles do happen. What I would like to know more about is the partitioned HD that it has. Am I right in thinking it is a backup of some sort.
 

A:Compaq Presario HD Partition

8 more replies
Answer Match 56.7%

I have a Compaq Presario, Authentic AMD K-6 3D Processor.
In order to run DirectX 8.1 for my 5 year old to play his new TONKA games, I need to upgrade the video card. I have looked on the TRIDENT website (with no success) and was wondering if anyone has a newer version than I have. This is what I have:

Trident Blade 3D/MVP4 (63)
Trident Microsystems
Chip type: Blade 3D/MVP4
main driver trid_p3d.drv
v. 4.12.01.2214
Mini VDD: trident.vxd
VDD: *vdd, *vflatd
 

A:Compaq Presario 7360

6 more replies
Answer Match 56.7%

hello recently my pc has been failing to start up and asking to go to the start up repair my pc is fine but will this lead to future problems

thanks ~shadow

A:compaq presario cq60 help

Hi and Welcome to TSF!

What did startup repair find?

Do you have your Windows cd?

2 more replies
Answer Match 56.7%

I really don't know that much about computer but i have a compaq presario v6000 and i just brought a new hard disk drive ST9100824AS and i trying to put on windows 7 and its saying no IDE found when i run diagnosis test. When i go to run the windows 7 disk i get to the installing screen and its doesn't find hdd. I need some help. Thanks

-MaxG

More replies
Answer Match 56.7%

I have a Compaq Presario C74EM which I just installed Win 8 RP. The sound did not work.

Eventually I was able to find and install drivers - sound still didn't work, but after following the advice on a forum post, I put the computer to sleep, waited a few minutes, woke it up, and sound now works.

This computer came with Win Vista home. Supposedly the Compaq Win7 drivers will work with Win8. Compaq (hp) has utilities that will go through any/all drivers, and update to the latest.

Does anyone know how to get this going under Win 8?

More replies
Answer Match 56.7%

Had to default my laptop now when it starts to load windows
says starting windows setup is preparing computor for first use
welcome message comes up then says windows could not complete installation,.to complete restart the installation
i press ok and goes over again starting windows
 

A:Compaq presario co61

What's the part/product number(P/N) on that Compaq Presario laptop?

You appear to have a CQ61 series model, so we need to confirm which one you have.
There should be a dash and additional characters after CQ61.

--------------------------------------------------------
 

2 more replies
Answer Match 56.7%

System simply freezes. Compaq Presario 5000, running XP. Latest Windows updates already applied. Any ideas???
 

A:Compaq Presario won't go into Standby

6 more replies
Answer Match 56.7%

Related to the problem that I posted about here: http://www.techspot.com/vb/topic141683.html, this is a little more urgent. The Compaq will frequently, sometimes regularly lock up: screen freezes, neither mousepad nor keyboard respond, and the harddisk parks the heads. Lately, it locks up when it's on the charger, and then is fine (at least, so it seems) when on battery-power. It's also sensitive to being touched--not bumped, it's that unpredictable. Sometimes, I can move it around without problem, other times, if I even touch it, it freezes.

The fans still run like normal, so I don't think that it's overheating. I'm afraid it's a motherboard issue, which I wouldn't be surprised at, considering that it's about 6 years old.

Any suggestions would be much appreciated.
 

More replies
Answer Match 56.7%

I was wondering how people thought of the Compaq Presario laptops as i am thinking of purchasing
 

More replies
Answer Match 56.7%

My Presario reads press esp key for start up menu.  It reads Intel UNDI. PXE-2.1(build082)

More replies
Answer Match 56.7%

i just did a fresh install on this compaq laptop w/ win2k pro and i lost several of the add on thingys that compaq added to the laptop.

ie. the volume and scroll options on the keyboard. i went to the compaq site and haven't found the documentation on what the name of the programs or drivers are called for these 2 options.

any help would be nice.
thanks
 

A:Compaq presario 1694 w/ 2k pro

You should have gotten a Restore CD with your laptop. That is the OS and all specific drivers, apps and Compaq features that were on the system. Anytime you install a "fresh" OS, you will lose all that stuff. With Compaq, I think this is not all bad. If you bought the laptop with something other that Win2K, then you are most likely SOL and on your own.
 

1 more replies
Answer Match 56.7%

I have kali linux live on usb and wanna load it i used windowsimager32 to make it work on my ither laptop but jt wont work on this one

More replies
Answer Match 56.7%

ok the dilemma is simple ok i bought this new laptop for the wife then it came with a built in webcam truth is i don't want that webcam so i bought another webcam that i am trying to use on msn but the laptop states found new hardware but doesn't install my webcam is usb ported it says m style on the cam the only thing it uses my wife states that she can access the cam thru the control panel but not in msn why is this occuring if someone could get to me asap would be greatly appreciated thanks in advance
 

A:Ok new laptop compaq presario

You may need to disable the original webcam

You can disable it by going to: Device Manager (Start->Run-> Devmgmt.msc)

Then locating your Webcam (that you don't want to use) and then right click on it and select disable

Then go back to MSN and use the settings to set up the new webcam
 

1 more replies
Answer Match 56.7%

Compaq Presario 3000+ AMD Sempron processor
Windows XP SP3
1 gig PC2700 memory
80 gig IDE HD
430 watt OS
Video and sound add in cards

On power-on the power light comes on, and the fans run, monitor is black.
 

A:Compaq Presario - no boot

16 more replies
Answer Match 56.7%

Hello Sir,
         My Name is Baldeep Singh, i have a problem with my Hp Compaq Presario C700. When i power on the laptop its display is dosen't respond anything but the laptop is running ok because all the led panels are blue and the HDD led also blinks. I tryed my level best but its of no use. i read all the instructions in internet and did as the same but of no use. Came you help me.

A:Compaq Presario C700

Have you tried using an external monitor to see if the problem is with the display?

4 more replies
Answer Match 56.7%

I have a compaq presario 7470 in my possession. It used to work, but not for some reason it refuses to. I just bought a power supply for it and it still doesnt work. I figured out that if u remove the J3 pin from pins 2 and 3 after pressing the power button it will turn on. The compaq screen comes up and it says '102-System Board Failure.' This seems bad...what should i do? is it a fried motherboard? if the board was fried would it even turn on?? Thanks!
 

A:Compaq Presario 7470

I don't think the motherboard is fried in which case it wouldn't boot, as you say. But it definitly is having some problems...

Has Compaq support service gotten back with you yet ?
 

11 more replies
Answer Match 56.7%

Hi Everyone, I am new to this site and really need your help. I have a compaq presario desktop sr1725an and I need to run a complete recovery on the system. I have tried everything the hp site tells me, but so far nothing works. I really need recovery discs for this computer, it currently has xp loaded. Does anyone know where I can download recovery disks for this computer, I want to restore it to its factory settings.

Please, any help would be great.

Thanks!
 

A:Compaq presario sr1725an

7 more replies
Answer Match 56.7%

I hit the power button this morning and nothing happened. Tried unplugging and holding power button in and still nothing.
 

A:compaq presario will not turn on

Please post your system specs, exact model Presario, include any upgrades or modifications please.
 

1 more replies
Answer Match 56.7%

Installed with Vista Premium, i've realised that it has a Recovery Partition and im not sure how to use it. my computer came with a windows vista disc, but im trying to recover Vista and im not sure how to do it. maybe someone can give me a heads up on how to do it.
 

More replies
Answer Match 56.7%

I'm trying to reformat my mom's old Compaq Presario SR1303WM. I've set it to boot from the cd-rom and I almost had it. But after deleting the partitions and starting a clean install it would only load the programs to 20%. After that it locked up and wouldn't do anything. I had to shut down and restart.

Now, it won't load from anything. Of course the old OS is gone so it won't start up on the hard drive and it won't boot from the cd. It just keeps going to a black screen with "Error Loading Operating System". Can someone please help me. I know they can't get a new computer and I just want to get a new install on this one to speed it up for them. They had a ton of malware and such on it.

Any help greatly appreciated.
 

A:Compaq Presario won't reformat

Since HP now owns Compaq, I am not sure what kind of cds you have in order to attempt recovery.
Per HP Support




HP computers that ship with Microsoft Windows XP do not come with recovery CDs. Instead, they use a hidden space (partition) on the hard drive to store the recovery information. The use of a separate partition provides a convenient process that eliminates the use of recovery discs that may be lost or scratched. A system recovery from the hard drive may not be possible in some circumstances. Your computer may contain Recovery Disc Creation software. Recovery discs for Windows XP are available from HP for a minimal cost. See Obtaining Recovery Discs for ordering information.Click to expand...

What kind of disk are you using to attempt restore, and are you using HP's support page?
Are you still set to boot from CD and to attempt to do so FIRST?
Is your BIOS properly identifying your hard drive?
What happens if you unplug the data cable from the hd before trying to boot to cd?
Do you have the "Recovery Console" option at some point during boot?
 

4 more replies
Answer Match 56.7%

Hey all,
Does anybody know if all of the motherboards in the Presario V6000 laptop series are the same size and shape?

More specifically, does anybody know if a V6000 motherboard would fit in a V6310 case?

If you need more info, let me know.

Thanks!
 

More replies
Answer Match 56.7%

My brother recently bought a new HP desktop PC so he wants to sell his old laptop (Compaq Presario 700, Windows XP Home Edition) and we both agreed we should do a full restore to completely wipe the hard drive clean to it's original slate and we have the original Compaq ''QuickRestore'' discs and for whatever reason, they're not working. There is three CD's and not a single scratch or mark on any of them. I've tried to run all three on the laptop and the only thing that happens is that the folder containing the discs files on it is what pops up and no actual setup occurs like it says on the little piece of paper that comes with the CD's.

This is what it says....

First, if your Presario Notebook is attached to a Port Replicator (QuikDock), you must turn the power to the computer off, disconnect it from the QuikDock, and plug it into an external power socket. Disconnect any printer cables or other peripherals from the computer before using Quick Restore.
1. Insert the Quick Restore CD (bootable disk) in the CD drive, and press Enter. A WARNING message appears advising that you are attempting to totally reformat your hard drive. Confirm by following the next step.
2. Press 1 and then Enter to continue. The Power Quest Quick Restore Wizard starts copying and uncompressing data to the local hard drive. This process takes approximately 7-10 minutes.

This warning message never appears and none of this ever happens. Does anyone know why... Read more

A:Compaq Presario 700 (Windows XP)

Is there an autorun.exe? Setup.exe? Any executable at all on the root of the disk?
 

1 more replies
Answer Match 56.7%

I have a compaq Presario and I want to format the hard drive. This unit has a c:PRESARIO with 68.56 GB 16.7 used and 51.7 free File system NTFS and d: Presario_RP 5.98 GB, 4.49 Used, 1.49 Free, File System FAT32
Is there anything I need to know befor I do this?
I can not find the org. disc that came with the computer, but i have my xp disc from my lap top will that be ok and or do i need that
I ran the malware and found 16 viruses. A lot to do with tool bar locations or something.
The system is still running extreamly slow takes forever for the "MY COMPUTER" screen to load.
I did find that it runs like new in safe mode if that helps.
Please help
Paula

A:Compaq Presario very slow

I have a compaq Presario and I want to format the hard drive. This unit has a c:PRESARIO with 68.56 GB 16.7 used and 51.7 free File system NTFS and d: Presario_RP 5.98 GB, 4.49 Used, 1.49 Free, File System FAT32Is there anything I need to know befor I do this? I can not find the org. disc that came with the computer, but i have my xp disc from my lap top will that be ok and or do i need thatI ran the malware and found 16 viruses. A lot to do with tool bar locations or something. The system is still running extreamly slow takes forever for the "MY COMPUTER" screen to load.I did find that it runs like new in safe mode if that helps.Please help PaulaIf you have all of your pic`s, music and anything else of importance backed-up then you are all set.You probably did not get any discs with the computer. The D: drive is a "restore partition" = RP. This is an exact image of your computer when you first bought it. To use it: When you first start the computer there will be a black screen with probably three different choices of keys to press. One of them will be something like system restore or restore. Hope you get the idea. Select the proper key and follow the onscreen prompts.One other option may be to go to the HP\Compaq (HP bought Compaq) site or call them. You may be able to get the discs for a small fee.

1 more replies
Answer Match 56.7%

Hi Guys,

I Have a Compaq Presario SR1000 and I ended up getting a virus on the machine. Now I cant boot in to windows or safemode, but I know the harddrive is partitioned.

I dont have the manual or boot disks for the computer anymore, does anyone know the command for these machines to access the partion?

any help would be appreciated.

Thanks
 

A:Solved: Compaq Presario

The manual doesn't say .. But I'd try the F10 key at Bootup.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&lang=en&product=407663&

You can also Email HP support and see if they know ...
... and If you can still get the recovery CDs ..
[email protected]

Does this computer have a sticker on the side .. or somewhere ....
That tells the M$ product code for the operating system installed ???
 

2 more replies
Answer Match 56.7%

My friend bought a new computer the other day without asking me for my opinion. I was wondering if he could put a better vid card in it. If so is it AGP 4x or 8x or no agp at all. THANX a bunch.
 

A:AGP on Compaq Presario SR1224NX

This doent help dude post system spec so that we can tell whether he can go for a AGP/PCIe or whatever his options are.
 

4 more replies
Answer Match 56.7%

Hello;

I have had a Compaq Presario 1500 laptop for about 2 years now, and I am quite un-satisfied when it comes to multi-tasking several applications at the same time. Sometimes it is so slow that I cannot minimize a full-screen application to read up on something on the net. I currently only have 256 megs of ram, but I read on the internet that tihs model could have up to 1 gigabyte. This is great, but therein lies my question. The laptop has two ram slots, one of which has been empty since i got the computer. Could I get a gig of ram and still keep the 256y meg stick as an added boost? or is the 1 gig the maximum for both slots?
 

A:Compaq Presario RAM upgrade

Well if your laptop supports a maximum of 1gb then that means 512mb per RAM slot.
Here are a few links on Newegg which is the Maximum Memory you could get for your Laptop. This is if you are in USA
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145482
http://www.newegg.com/Product/Product.aspx?Item=N82E16820134037
http://www.newegg.com/Product/Product.aspx?Item=N82E16820172102
 

8 more replies
Answer Match 56.7%

Have a Compaq Presario 1020 - laptop. Info is as follows -
Series 2900A
Model FBV1433VQL1J
Serial V644HZD50299

Need a maintenance manual. Any help would be appreciated. Thank you.
 

A:Compaq Presario 1020

http://h10025.www1.hp.com/ewfrf/wc/product?product=94911&lc=en&cc=us&dlc=en&lang=en&cc=us
 

3 more replies
Answer Match 56.7%

will not boot to windows- tried to reinstall xp will not boot to xp cd-continually goes back to screen saying last known config, boot normally or safe mode help please
 

A:compaq presario keeps rebooting in xp

7 more replies
Answer Match 56.7%

Hello Everyone,

I am running Windows XP Pro on a HP Compaq Presario S3190UK desktop and since this evening I haven't been able to even get to the Windows Splash screen.

When I boot I am given the options of Safe Mode, Last Known Good Configuration, Start Windows Normally and Recovery Mode (which doesn't respond). Whichever option I select it stalls and will not boot the files and when I boot in safe mode it stalls after about seven seconds.

I have the Operating CD which I have tried to boot from but upon boot up I get the message "Please insert the Restore Plus! CD" . I don't have this.

Is there any chance of me retrieving my data?

Thanks for your help in advance.
 

A:Restore Plus! CD for HP Compaq Presario

16 more replies
Answer Match 56.7%

Hi this is my first post so bare with me.

I have a compaq presario 2580us laptop first of all with a pentium 4 in it.

My question is this. My laptop has 3 fans in it and they all used to come on in the past. Only one(the biggest) has been working not sure how long it has just been the one either. My temps get up to around 127F. I am just just wondering if there is a way to check out why the other 2 fans are not working. If there is some setting that I could check that would be great. Any assistance would be so nice.

Thank you,

Jackie
 

A:Compaq Presario Fans

I did this on a machine at work 2 weeks ago. Check hp.com, do the auto detect thing, and update the bios. should solve the problem.

hope it helps.
 

9 more replies