Tech Problem Aggregator

After reformatting computer,Monitor being strange!

Q: After reformatting computer,Monitor being strange!

i did a reformat of my computer.

since the last time i reformatted about 6 months ago, i changed my monitor(to one that was manufactured in 1996). i had no problems.

after i finished doing a reformat today(im on a different computer now),the monitor shows multiple WIndows Xp desktops,like 5-15! all kind of scratchy so i can barely make out the screens.
i booted into safe mode,there is no problem, a normal WINDOWS XP desktop appears. i did a "add harware" search in safe mode, came back negative.

A: After reformatting computer,Monitor being strange!

sharky said:

i did a reformat of my computer.

since the last time i reformatted about 6 months ago, i changed my monitor(to one that was manufactured in 1996). i had no problems.

after i finished doing a reformat today(im on a different computer now),the monitor shows multiple WIndows Xp desktops,like 5-15! all kind of scratchy so i can barely make out the screens.
i booted into safe mode,there is no problem, a normal WINDOWS XP desktop appears. i did a "add harware" search in safe mode, came back negative.Click to expand...

the safe mode thing could be a clue, and indicate a driver problem, if you have a video card try uninstalling it completely and reinstalling. Go to device manager in safe mode and remove video driver, shut down and reboot see if you can get into windows then.

2 more replies
Answer Match 63%

Recently i received a BSoD of physical memory dump, didnt have a chance to see other info, and i shrugged it off thinking it wasnt so big, but i rebooted my comp and the fans were running and the lights were on, but nothing showed up on the monitor, it just showed a message "no video input" and would put the monitor to sleep. well anyways, i was wondering what i couuld do, because there is no boot screen at all, i was thinking about reformatting it but i was wondering how to do it without any possible view of what is going on. another problem is that my friend had lead me to believe it was a hardware problem, so i purchased a new power supply seeing as maybe my supply burned out, i installed the new power supply and still no improvement, so i decided to switch back to the old power supply, but when i had boot it up it didnt even light up, so i decided not to tamper with the hardware anymore. anybody have any suggestions?

i am running vista, and the computer came with vista installed when i purchased it, i was wondering if i reformat it, could i install XP rather than vista? THANK YOU to all your responses.

A:Reformatting computer without monitor screen

try another monitor or try the monitor on anther computer.

If everything sounds like its being turned on with the normal lights on keyboard and case but no screen, and if you have onboard video, not a separate video card, then it could be bad ram.

One thing though, do not try a reformat without a monitor!!!

3 more replies
Answer Match 63%

I am trying to install windows 7 on my current computer (xp). Everytime I start to install win7 through a dvd, my monitor would shut off (the cpu would stay on). My computer has a history of losing its connection to the monitor during reformats and os installs, (it happened when I tried to install windows xp in the past) and this problem only comes up during these situations. Here is a video that basically shows what happens

http://www.youtube.com/watch?v=mRhrrnpipG0

skip to 4:15 to see the problem

I tried restarting the process about 7-8 times now, and it does the same thing each time (although not at the same moment, sometimes earlier in the setup)
Any idea what is the issue?

Thanks for any help you can provide.
 

A:Computer monitor disconnects during reformatting

http://support.microsoft.com/kb/975253 this not actually relevant but may be worth considering
i would say its 99% def a bios issue incorrect settings for your monitor either bios set for a card or from the motherboard
 

2 more replies
Answer Match 56.28%

HI Everyone,
 
This happens about once every week or so.
 
1. Computer Monitor goes Black, then the "Enter Power Saver Mode" comes up on the screen.
 
2. Then the screen flashes this pattern (see Attached picture I took) this pattern goes on and off going black and then back to this pattern in a continuous loop every few seconds.
 
3. Once I reboot everything is normal, until it happens again.
 
4. I hooked up another Monitor and the same pattern continued, so I ruled out the monitor.
 
5. Re-set cables and connectors.
 
6. Cleaned out the inside of the computer.
 
7. Updated the Graphics Card Driver.
 
8. Strange that if I have music playing on the computer, the music continues to play through this. It seems that the computer is running, except for the fact that I lose all control.
 
9. I can't get the mouse or keyboard shortcuts to respond.
 
10. Hope I did this correctly, Attached are the files I think you need to look at.
 
OS - Windows 1064 Bit
 
Thanks for your Help on this!
Ken

A:Computer Monitor Goes Off, Strange Pattern on Screen, Computer Reboot to Fix

The "power saver mode" thing is an indication that the video card isn't sending a signal to the monitor.
Yet, the crazy pattern shows up - so it seems like the video card crashed, then resets improperly.

Have you tried reseating the video card?
Checking to make sure that it's cooler is free of dust/hairballs?
That the cooler fan is working?
Have you monitored the temps of the card before it behaves like this?
 
The Admin event log shows lot's of NTFS errors blamed on I/O errors.
As such, please run these free hardware diagnostics:  http://www.carrona.org/hwdiag.html
Start with the Hard Drive diagnostics please.
 
Only a few BSOD's in the attached reports (but no memory dumps) - and lot's of Live Kernel Events.
I strongly suspect a hardware problem here, and think that the hardware diagnostics will help to identify which hardware component is to blame.

Good luck!

0 more replies
Answer Match 53.34%

I've had my computer for about four years. It worked as intended until early today, when I tried to turn it on and I noticed that the mobo beeped unusually and I'd get no signal on my monitor. Everything else powers up, fans, cd drives and I can also hear the hard drives. The computer sounds as if it boots correctly, but I get no monitor signal.

I tried looking through Intel's documentation for my mobo but I just couldn't find a beep or POST table.

I get a long beep (3 seconds) plus two short beeps that last about half a second each. I usually get a single one second beep.

Help appreciated.
 

A:Computer with D101GGC mobo won't output to monitor, strange beeps, help

This may be a memory failure or power supply problem... Have you tried resetting the CMOS/Bios?
 

6 more replies
Answer Match 49.56%

I have tendency to mess up my computer, and usually everything goes back to normal after a reformat

but after this time, my computer seems to be moving generally slower. particularly, when i got to shutdown, it remains on the shutdown screen for a good 2-3 minutes before actually shutting when before i would see the blue shutdown screen for about 10-20 seconds.

also, i have gateway profile 5 and it has the turn off monitor option, and it used to work. but it doesn't now. when i set the turn off monitor option to 2 minutes, i have to reboot the whole thing and then it turns off after 2 minutes, otherwise the monitor doesn't turn off at all. i would turn off the monitor manually, but that's not an option with profiles (like there's no button).

so i don't know whats wrong. i contemplated trying to re-installing windows but i wanted to make sure that that would actually work before i started messing around again.

and in advance, thanks

(i put this up on another site and i didn't get any replies, so i'm putting it here)
 

A:Problem with shutdown and turn off monitor after reformatting

1 > Run eventvwr.msc and look in the Applications log for eventid errors 1517 -- if you see any, install this:

http://www.microsoft.com/downloads/...6D-8912-4E18-B570-42470E2F3582&displaylang=en

2 > Try troubleshooting it using "clean boot" techniques:

Run msconfig and select the "Services" tab. Check "Hide Microsoft Services" and then disable the rest. Also uncheck "load startup group" on the general page.

See this link for detailed information:

http://support.microsoft.com/default.aspx?scid=kb;EN-US;310353

Now restart and test the issue at hand

If no problems, run msconfig and recheck half the disabled items on the Services tab. Test again. If the problem recurs, UNcheck half the items you just checked to narrow down the culprit.

If the problem didn't occur, check the other half, so all the Services are enabled -- proceed to do this on the startup tab as well.

Get the idea? You want to isolate the problem to a specific startup if possible.

Note: if you already have items unchecked under msconfig > startups and are in “selective” startup mode – you should note what these are before beginning. They will need to be de-selected again.
 

3 more replies
Answer Match 49.56%

I have an nVidia GeForce4 Ti video card with s-video out. Before I reformatted it was set up so I could watch DVDs and downloads on my TV. I'm not sure if the TV was considered the primary display or not.

I reformatted the hard drive today and after I get to the point where it says the computer will reboot and after the reboot WinXP setup will continue, the computer reboots, I see it run BIOS on the screen, but then the monitor goes completely black. After trying it several times, I realized it's sending the picture to my TV.

I can't, however, read anything on the TV because the screen is flickering. Does anyone know how I can get the picture back on the monitor?

A:Problem Reformatting - setup screen on TV instead of monitor

I started messing with the settings on the actual monitor. Autosync seemed to do it. I now have a pictures on both the monitor and the TV.

Hope no one else ever has this problem... I thought I was going crazy.

1 more replies
Answer Match 48.72%

Hello,

With the help of the members here, I was able to successfully reformat my computer's hard drive (my computer is a Gateway Pentium 4 running WinXP SP 2). However, there were a couple of problems I ran into straightaway, the largest of which being that I had no sound hardware installed, and the Entertainment folder was completely empty.

Unfortunately, before I could ask for help about that, I ran into an even more severe problem. I have a second internal hard drive that I unplugged from the motherboard and the primary hard drive during the reformatting procedure. When I plugged it back in and turned on my computer, it make the usual noises it makes while starting up, but when I turned on my monitor, I got the red, green and blue bar and the "No signal" message I usually get just after I've shut down my computer, then the entire screen turned black and after a few seconds, the blue power light turned orange, as if the monitor was in "standby" mode.'

I checked the connections running to and from the monitor several times and made sure that they were as secure as they could possibly be, and even tried unplugging the secondary hard drive again on the slim chance that it might somehow be contributing to my monitor's problem. Nothing I did made any difference. I was convinced that my monitor had just chosen an extremely inconvenient time to die when I tried hooking a different monitor up to my computer, and the exact same thing happen... Read more

A:Solved: Monitor no longer working after hard drive reformatting

8 more replies
Answer Match 44.52%

Hi, I have decided to reformat my computer and I have never done this before and I was wondering what I would need to reformat my computer. I run Windows XP.
 

A:Reformatting Computer

16 more replies
Answer Match 44.52%

How do I reformat my HP PC?
The model is dx5150.

I heard about various methods such as using F10 when in the blue HP screen during startup to reformat it. But it doesn't work for me 'cause I don't have a blue HP screen.

By the way, I don't have a Windows XP CD or any boot disks or such.
Is there anyway to reformat without an XP CD?

A:Reformatting the Computer

Well you need to have some kind of boot disc whether it be a cd or a floppy. You can use DBAN put it on a floppy and wipe the drive that way. And if you plan on using the computer again you need to have an OS disc to do a reinstall otherwise it is useless without an OS.

13 more replies
Answer Match 44.52%

Hello....

I want to KILLLLLLLLLLLLLLLLLLLLLLLLLLLL my computer!!!!!!!!!!!!!

I hate it, I can't stand it... eitherway..... so it's win xp home

Tried to reboot that bleep of trash and pressing F8 then F10 then F4 constantly and it didn't work.... tried delete and got into bios

Problem - I was NOT given a CD... Futureshop and Canadian Electronic stores practice Tyranny

So.... Through my reading I found out about the I386 folder - mine was deleted so I re-installed SP2... BUT no winnt files that are exe

Now what? Any ideas?

A:Reformatting Computer - No Cd

by law your computer maker must furnish you a way to reinstall, sometimes it's a hidden partition on your hard drive, others even have you burn the cd's, if you neglect to do this or lose the manual telling you how to reinstall, companies will send you a reinstall package for a small fee, the important thing is your certificate of authenticty where you have a valid number.

call them up

4 more replies
Answer Match 44.52%

c:\WINDOWS\system32\presetup.cmd - FILE NOT FOUND!
c:\WINDOWS\system32\setupORG.exe - FILE NOT FOUND!
(setupORG.exe ->Original windows Setup.exe)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
POSSIBLE CAUSE:
1."Preset.cmd" not exist in the i386 folder in UXPCD
"setupORG.exe" not exist in the i386 folder in UXPCD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. Check your "txtsetup.sif" in the i386 folder on UXPCD
---Txtsetup.sif---------------------------
[SourceDiskFiles]
setupORG.exe=1,,,,,,,,2,0,0 ; must exist
prestup.cmd =1,,,,,,,,2,0,0 ; must exist
---------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Now this is very similar to the post found on these forums but it doesn't solve my problem.

To walk you all through what i've done so far.
____________________________________________________________________________
Trying to clean up my dads XP Home ED comp. I went out and bought Windows XP PRO.

Now i'm not used to HP, the BIOS is all weird so I had to insert the disk and start the installation process instead of just restarting and booting from the disk.

Now I wasn't able to delete the Windows XP Home ED. Partition so I just merged the two since they have similar files.

Everything was installing fine until I got the error message as posted above.

I've checked the windows disk, everything ... Read more

A:Reformatting Hp Computer

Now i'm not used to HP, the BIOS is all weird so I had to insert the disk and start the installation process instead of just restarting and booting from the disk.Why can't you boot from the CD? Familiarize yourself with the BIOS and look for a 'boot order' option and make the CD first.

5 more replies
Answer Match 44.52%

Am currently writing this using my laptop computer. I need help in formatting my desktop pc. It runs Windows Vista Home Basic, and as you know the *restore to factory* recovery info is contained on the hard drive(which I cannot access) Is there any other way I can format it?

Here is the problem with the other computer....
I push the *power* button to boot up computer but it takes 20 minutes to an hour to boot to the desktop...in process I see no *logo* screen, so cannot tap F8 to gain access to the advanced boot menu screen. Then suddenly it boots to the desktop. I can acccess anything ON the desktop but cannot access IE, nor will Add/Remove programs work. I click to uninstall a program, and it says *its working* but it basically freezes and doesnt uninstall anything, AND doesn't really do anything. I had to use ctrl/alt/del to shut it down. Restart does not work, same problem with booting.

Bad me, I had loaned the computer to a friend for a few months while I was preparing to move, and moving as well. I just got the computer back last week. YESTERDAY my friend tells me the pc has been *misbehaving* for about 2 months and never before had any problems while in my home. I know, never loan computer to *friend*...but lesson learned.

I really need to know how to format. Am wondering if I should create a boot disk for it from this computer and then try that.....but will wait for your advice.

PS: I have been waiting for the computer to reboot now for about 1.5 hours... Read more

A:PLEASE! I need help in reformatting my other computer...

what are you running
video card
cpu
m/board
ram
power supply
brand
wattage

check the listings in the bios for voltages and tempretures and post them

because of it being moved something could have worked loose check the connections
in the bios disable the the gui[logo]
try a cmos reset
turn the computer off
remove the power lead from the back
take the side off
remove the cmos battery
move the cmos jumper from pins 1 and 2 to pin 2 and 3 and the back to pins 1 and 2
reinsert the battery
put the side on
replug in the power lead
boot the computer

there can be 2 solder points you touch with a screwdriver
2 pins you touch with a screwdriver or use a jumper
a cmos clear switch or button

to restore to factory you usually put in the recovery disk and hit one of the F keys as it is booting up
then the recovery cd and the recovery partition work in conjunction with one another to impliment the restore
there will be a diagram and instructions in your manual

then see if you can get safe mode[low resolution mode]

9 more replies
Answer Match 44.52%

I have been having issues with my computer. I was having problems with a virus and I thought it was gone and then I went to turn on my computer and all I get is my desktop background picture and no start menu and no desktop icons or anything. When I hit Ctrl Alt delete nothing happens at all. No one has been able to help me with this problem. One person told me I would need to find the cd for my computer to basically reformat it. I thought I found the cd and put it in and again nothing happened. These are the cds I have, Operating System reinstallation cd. Drivers and Utilities. And I have a couple that say Application on them. Are any of these the ones I need or am I doing something wrong? I really need my computer soon and just need some help. Thank you.

A:reformatting my computer

Also my computer will not go into safe mode either. I have tried that.

12 more replies
Answer Match 44.52%

I have a computer with windows xp professional Edition which was infected with a rogue virus. I was able to remove this virus, however it infected the registry. All the periferals were disabled included the cd-rom, network drivers, processor drivers. I ended up deciding to reformat the computer. It has raid 0, with 2 hard drives.

When I formated it I got a BSOD 0x0000007b. I put in the raid controller driver on a floppy drive. I was looking online for any solution to this problem, I found a few but nothing that would help me resolve the problem.

This is a 7 year old computer but I'm used to it and do not want to buy a new computer.

I am hoping someone has experienced a similar problem and can tell me how to fix it

I ran a chkdsk on the hard drive, they were fine.

A:reformatting computer

System manufacturer and model?

What exact steps did you take to reformat/reinstall Windows?

Do you have a MS Genuine XP CD sold by Microsoft?

Louis

9 more replies
Answer Match 44.52%

I no doubt have viruses/malware and due to a failed reformat a long time ago, their is more than one operating system on my comp, and I just want to kill 2 birds with one stone and just reformat it and get it done with.

However, I have a few questions.

1) I don't have any of the CD's that came with the computer. If I go buy an XP cd, for all the other software (Microsoft Word, etc), how do I transfer it back to the comp without having to go buy it again to install it?

2) Is it possible that I transfer the viruses/malware when I put back the file I save after it reformats?

3) Any simplistic reformatting guides out there? I'm hardly computer illiterate, but I'm no technician...

A:About reformatting my XP computer...

Is your computer a brand name? There can be specific steps to take and you can often buy replacement recovery or reinstall disks for less than 20.00

List the brand model and service tag/ part number if any or describe the mainboard model and revision which is often a splash screen early in the boot process and is also written on the motherboard.

29 more replies
Answer Match 44.52%

Hello, new to this site. I want to reformat my computer and would like to find step by step instructions on how to do so. I already backed up my comp with Carbonite and a stand alone back up unit as well. Its a Dell laptop,AMD Sempron, Processor 3500+, 1.58 GHz, 896 MB of RAM/ Windows XP Home Edition 2002. What next? Any assistance would be appreciated!

A:reformatting my computer

Are you just looking to format or format/reinstall windows?The easiest way to do it is just insert your recovery discs, or other windows installation disc, and go forwards as if you were going to install windows.Microsoft provides a guide to do so http://support.microsoft.com/kb/978307When you get to the point where it tells you that it is checking the drive you can eject the disc and shutdown the machine, or go through with the install if that was the plan.There are other programs to format as well, but if you were going to reinstall windows this is the easiest way.

7 more replies
Answer Match 44.52%

Hi. Recently I had some trojan rootkit hit my computer, and decided maybe it'd be best if I reformat it and re-install windows. Catch is, I'm not really good with computers and don't really know how to do this.

It's a dell laptop, and I have windows XP running on it. Still have most of, if not all, the original cds that came with it when I purchased it. What I'm wondering is how hard this is to do? Could I risk wrecking more than I do good by attempting this when I don't really know what I'm doing?

Let me know if your need to know anything else, like what model and other stuff, and I'll get back with it. Any help'd be appreciated, thanks.

A:Reformatting My Computer

Hello tofte

I have a fairly standard procedure that I follow, after backing up what data I can safely save and then restoring the computer
I apply any driver updates that seem necessary, you have to go to your model's web page and compare dates, if you see newer drivers, it's best to load/update them. Next I clean the computer of useless crud and adware installed by the manufacturer. Same thing for something like norton's trial subscription, there's a special uninstaller for that.

Next I will apply the latest service pack, having the latest drivers and no security software to interfer

Then I load my security software

Last I connect to the internet

This is a pain but I believe it to be the safest approach

In your log I noticed you were running norton's and PrevxCSI, and teatimer, avoid any combination of security software that
might conflict

22 more replies
Answer Match 44.52%

Hi, I'm trying to reformat my computer. When i put the window XP cd in, and i reboot my computer. I don't get the blue screen to full reformat my computer. I tried turning off my computer, and turning it back on. Putting the cd in and i don't get the blue screen. I reformat my computer before and i get the blue screen, but some reason i don't get it today.

A:Need help on reformatting my computer

Is the BIOS set to boot to CD first and then hard drive?

18 more replies
Answer Match 44.52%

This is a huge thread. I had no idea what forum to put this under, but I don't think it should have to go anywhere else other than here. This is a question about reformatting my computer, with no real full answers.

I have really started to notice how slow my computer has become, so I have decided to reformat the computer. Thing is, I am not going to just put back the back-up file, and I am not wanting to lose everything. Thanks to a second hard drive, I have decided to try and go through everything we need and put it on there manually, so to not include what I don't want. I just wanted to know, what do you think I should try and save from this reformat of a computer?

My list:
Program files (the instillation file)
Start-up files / 'All Programs' (much the same as ^)
Browser information (bookmarks, settings, saved passwords, forms (anything else?))
Bits of set up information (internet connection, drivers (must check my CD collection))
My document files (for all users) / Files stored on c drive (my folder, and everyone elses)
Documents and settings (go through them and have a look, not forgetting limewire shared downloads)
And your suggestions and reminders

Before doing any of this, I will have to create a few back-up files on DVD's just in case. I have not gone through with it yet, but DriveImage XML seems to be my best option so far. After that is done, I will get onto doing this eventually.
What do you think I could be missing?

Will this h... Read more

A:Reformatting the computer

11 more replies
Answer Match 44.52%

i tried my best to catch up to what our i.t specialist have taught me but he was so fast and very busy lately. please kindly jot down step by step how to reformat a computer.

A:Computer Reformatting

Assuming that you want to reinstall the OS, It depends on the computer and what disks you have.
If this is a retail computer, you should have a set of recovery disks or you might need an original Windows CD
What is the make and model of your computer?

4 more replies
Answer Match 44.52%

windows 2000 upgraded from windows MEcomputer totally messed up after someone went in and deleted everything from add/remove programs, all other programs and files etc deleted also.internet explorer still works and it will still connect to the internet but it won't install any necessesary programs such as avg antivirus or spybottried to reformat with win2000 cd, but it wouldn't complete the format. a message keeps popping up in a gray box: "the application must be installed to run. please set up fromt he location where you originally installed the application"went to http://windows2000.windowsreinstall.comshould I try Windows 2000 Pro install on used Hard Drive or Windows 2000 Pro Repair install ?the cd is a full installation disk.is there a way to format the hard drive to get rid of everything and then install win2000 from the cd? there is nothing to back up or save on the computer.

A:need help with reformatting computer

Pop in the win 2000 disk.....go to the setup menu..and instead of formatting the drive, delete the partitions and remake them. Then install.

2 more replies
Answer Match 44.52%

Okayzzz

So I reformatted my computer (from CD)... I had 2 problems DURING reinstall-ation

1- missing duser.dll file (so I skipped it)
2- when it was "updating" for some fun reason it said I had some setup something unabled....
So now I'm trying to connect to the internet and no luck.... I installed Mozilla from a USB... IE7 and Mozilla exist but neither connects....

I went to control panel -> Network Connections -> Add New Connection -> Get error "The New Connection Wizard was unable to open the following location on your machine: C:\Program Files\Online Services"

I can reinstall windows again but it asks if I should update (recommended) but I can't even connect to the net... and YES the internet is connected to the other computer and the Ethenet is green - the plugs are working so is the machine
Anywayz I did add Duser.dll to my other computer (in the system32 folder) - but that's still not giving it the ability to go onto the internet.... still same error... in a sense the computer looks screwed but I need to somehow get onto the net so that I can reinstall windows with the updates and such

A:Reformatting My Computer

Try reinstalling it again, and make sure the CD your using is clean. If theres dirt or a scratch over a certain part of the CD, whatever file was there, the setup will skip. If you get the same error but your cd doesn't have any scratches on it, than it's something else. Try reinstalling it, that would be your best bet right now.

3 more replies
Answer Match 44.52%

Hello,



I would like to reformat my computer or set it back to the original settings. I cannot find the windows xp installation cd / boot disk.

I brought the computer legally so I have no idea why I didn't get them, I have all the other details of purchase and stuff.

I remember being asked to make a disk when I first switched on the computer but this was my first computer so I didn't have any disks or understand what it was doing.

Is there anyway I can reformat my computer or reset the settings?
 

A:Reformatting my computer

9 more replies
Answer Match 44.52%

So I'm going to help a friend reformat and old computer and put XP on it......
I don't know if formatting old computers with XP is safe? She says its pretty old, like '99 and she got it for free from a friend for work (she can't afford anything else right now)
So it's not like we can go out and buy a bunch of stuff for it....I think it's running on Windows 98 & I know nothing about the drivers and I know she doesn't have any CD's for the drivers....

SO any advice on how to go about doing this would be awesome.
Thanks!
 

A:Reformatting an old computer...

I would have serious doubts about a '99 PC being able to run XP.

You really need about a 500 MHz CPU and 256 MB of RAM to make it run in a useable manner. Do you have that on the old PC?

Apart from that you just put the XP CD in the drive and let the PC boot from it, following the menu's. Remember it has to be a copy of XP that is not in use on any PC and was never supplied "with a PC", or the operating system may refuse to activate and lock you out.

1 licence per PC.

Then you need to know the make and model of PC or the make and model of the motherboard so you can get the correct XP drivers from the makers website (if any were ever released, given it's an old PC)
 

2 more replies
Answer Match 44.52%

Hello,
I want to know if there is any way to reformat my computer (HP) without having the default factory programs (AOL 3 Months Included, Get Vonage, My HP Games, Norton Internet Bullsh*t, and all this other crap) installed.
If there IS any way, can you please explain the procedure?

Thank you,
Eli
 

A:Reformatting a computer...

6 more replies
Answer Match 44.1%

Hi guys,After my virus/spyware infection, I decided to reformat my computer because after the cleaning, my computer seems to be messed up. The virus/spyware is gone but my computer is screwy. So I decided to just pop in my sysytem recovery dics that came with my computer. However, due to the current state of my computer, it would not autorun. So I had to restart my computer. Upon restart, I was prompted to perform this recovery, which I clicked yes. Now the problem is that, I didnt work. Before the process even starts, I am told that the reformat cannot be performed because the file hive "systemroot/system32/config/SECUIRTY" is either missing or corrupt. I have my system CD, what should I do? Thanks!Lawrance

A:Problem Reformatting Computer

It could be that your CD is dirty or damaged. Try cleaning it with a soft cloth.

27 more replies
Answer Match 44.1%

I have spent the week running scans to remove a virus I received (ispynow) and have decided to reformat my computer instead. I have backed up all of my files (though I am concerned I now have the virus in my external hard drive). I have an HP dv1000 laptop and the hp site says I should have to make recovery cds and can then reformat using the "system recovery" tool that shouls be listed under programs. I can' find that. It also says I can use f11 key when starting up to follow the same steps but f11 doesn't seem to do anything. I have an "application and driver recovery" cd and the "operating system cd" for xp home sp2. I just want my computer back either by getting rid of the virus or reformatiing. Thank you for your help.

A:[SOLVED] need help reformatting my computer

Here's a good checklist for you.


The Windows? XP Installation Check List.
1. The Windows? XP SP2-CD (naturally)

2. Darik's Boot N Nuke?..A Disc wiping Utility; or alternatively... Killdisk?. (Click the coloured Links).

3. Please read this guide...A Step-by-Step Installation Guide with explanations for each step of the installation.

4. The Motherboard CD that contains all the necessary Drivers etc.

A few tips:
a. Darik's Boot N Nuke will take about 4? hours to completely wipe the Drive; however, this will vary depending on how big the Drive is. (That estimate is for a 80Gb HDD). Wiping the HDD this way will give you the best chance of a 'clean' uninterrupted installation.

b. When you get to Figure 7 in 'The Guide', you can create more than one partition here by simply telling Windows? how big you want it. Should you do decide to create an extra partition, it will not be active until you do so after the installation is over and done with...we can give you guidance as to how this is done, so partition away if you wish.

c. Once the installation is finished, with all the Motherboard Drivers installed, and Internet connected, I strongly recommend that you install a reputable Anti Virus program first; then, go to the Windows Update Site and download all the updates (including SP3).
AVG? is has a very good free version available here. ... Read more

3 more replies
Answer Match 44.1%

Ok after some help from these forums I found out I have Virut virus so I now have to reformat and reinstall my computer.
The only problem is idk how to go about doing that.

I'm on a Compaq Evo N115 running Windows XP Home Edition.

Now I used to have a compaq presario 700 and it came with these QuickRestore discs. Would I need those discs for this computer in order to do this?

If so where can I find them?

Thank you very much in advance.

A:Need help Reformatting and reinstalling computer

From http://h18000.www1.hp.com/products/quicksp...11059_div.HTML:"System Recovery: Each unit is shipped with a CD kit for quick recovery (erases hard disk and restores manufacturer-installed image) and software recovery (installs only selected standard software)."http://h10025.www1.hp.com/ewfrf/wc/documen...=reg_R1002_USENLouis

6 more replies
Answer Match 44.1%

Hello sevenforums, Ive recently been getting the BSOD.

Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

BCCode: 1a
BCP1: 0000000000041790
BCP2: FFFFFA8001A00F40
BCP3: 000000000000FFFF
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

So I reinstalled windows 7 ultimate 64bit (thinking it was a software problem), and I got a BSOD before I even installed my graphics card and motherboard drivers.

So I install my drivers, they where successfully installed. Unfortunately I am still getting a BSOD every so often.

I recently purchased a new graphics card, and I'm 70% sure its the problem, but I want to be absolute!

I'm not an expert on BSOD and computers in general. So I have another assumption.
It could possible be my windows disk?
My windows 7 ultimate disk was somewhat glitchy. It took 3 attempts to install windows 7 (I would get an error at 37%). After the 3rd attempt it installed.

I added an attachment to this thread with the required system information using the SF Diagnostic Tool this forum suggested.

Any information on this problem would be great!

A:BSOD Before And After Reformatting Computer

Hello Baconman37 and welcome to Sevenforums.

I received your additional files, however I did not receive your crash dumps. To get these & enable them -
To ensure minidumps are enabled:






Quote:
* Press Start, in the Search Box type: "sysdm.cpl" (without the quotes), press Enter.
* Select the Advanced tab, click on Startup and Recovery Settings.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information headline select Small memory dump (256 kB) in the dropdown box.
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK till you're out of the dialogue.
* Reboot if changes have been made.

When your system crashes, go to %systemroot%\Minidump, wrap the newest 3, 4 dumps in a zip and upload them.




   Information
If crash dumps already exists in the folder, upload the newest and skip the above steps.

Best Regards,
Frederik.

1 more replies
Answer Match 44.1%

So i just recently purchased a new computer and i got that blue screen so i decided to reformat. when i boot from the cd it gets to the screen inquiring if i want to install windows (enter), repair windows (r), and one other option.

after i hit enter, it goes to a blue screen and at the bottom it says examining fjsdklfsafdsa (i dont rememeber exactly what)

I think its examining my hard drive but it wont get past there. i left it on overnight and nothing changed from that screen.

I reformatted my laptop right after this to see if it was an issue with the cd but my laptop reformatted just fine.

Please help me resolve this situation, if more info is needed please just let me know and ill find whatever i can. Thanks!

A:Help! Computer stuck when reformatting

Is this an XP cd and Vista was the OS that was on the laptop? I would try to do a full wipe of my hard drive without using an install CD. Try something like DBAN. That should wipe it pretty good.

LINK: http://www.dban.org/download

PS
You could also run some Diag tools on the hard drive to make sure that it isn't bad. I would use Hiren's for this.
LINK:http://www.hiren.info/pages/bootcd

2 more replies
Answer Match 44.1%

Hello.

I will try to make this story as short as possible, but I am very frustrated on this.

My dad's laptop had gotten a bunch of viruses/rootkits, so I decided to use KillDisk and erase everything with one pass.

Everything gets done and I reinstall Win 7 Home Premium 64bit. Install everything and use the laptop like normal.

For the first five minutes, everything is fine. Loads programs up in a couple of settings.

After the five minutes, it starts getting very slow. The mouse is lagging. Everything takes a couple of minutes to load. The only thing I even did besides have it on was install Windows Update when you first reformat.

After a few more KillDisks and reformatting. the same problem is happening. I know rootkits are harder to kill than most, but can it be possible it is STILL alive?

I also am thinking maybe something inside the laptop is wrong (CPU, HDD.) How would I be able to check this to let you guys know?

I will try the HP Recovery Manager in a while and see if there is any difference.

Please, if anyone could help me and give me at least some ideas to why this is happening.

Thank you.

A:Computer goes very slow even after reformatting

It's unlikely the virus could survive a simple format or just the Diskpart Clean Command
which wipes the boot sector, although some can get into the BIOS.

First I would concentrate on getting a perfect reinstall: Clean Reinstall - Factory OEM Windows 7 - Windows 7 Forums

Then if necessary compare that with Factory Recover if you made the DIsks or saved the Recovery partition: HP Recover Windows 7 Operating System Using HP Recovery - HP Customer Care (United States - English)

If problems persist test your hardware and work through these other troubleshooting steps

5 more replies
Answer Match 44.1%

I have an old computer from my office that is running Vista. I would like to wipe the HD and reinstall Windows. The tech who set up the computers made it impossible to just format the drive. I can't get anywhere. The tech is no help. The instructions he
gave me don't work. I have the registry key. Is there something I can download?

More replies
Answer Match 44.1%

I recently just reformatted my gx620 and as soon as it boots up and gets to the desktop I keep getting a message saying your computer will restart as soon as the installation completes. And when it restarts it keeps popping up and it does it over and over and I dont know what to do, I have reformatted the computer to try and fix the problem but nothing is working. Anyone know how to fix this?

More replies
Answer Match 44.1%

So I got a copy of Win XP Pro (april '09) and I went to install it on my computer, assuming it would format itself, but it installed Win XP Pro and left XP Home as well. That isn't really where the problem lies though - I start up XP Pro and it doesn't detect any of my drivers. My screen resolution is stuck to 640x480 8 Bit color because it isn't detecting my graphics card or ANYTHING, won't connect to the internet, didn't clear my hard drive - etc. etc.

so I got a driver detecting program on the Home edition and put it in program files, started up Pro edition, went to run it from program files there, and it won't let me run. Is there any way I can detect my drivers without connecting to the internet? Someone help me please.

A:Reformatting my computer (need help with drivers, etc.)

and welcome to the Forum


You can use the pc you are posting on now to download the drivers from the PC manufacturers support site . . burn to D or copy to flash and install on the other o0ne. Install the Chipset driver first, then the others in any order.

You have both Home and Pro because you did not do a clean install . . If you only want Pro, reinstall using this guide:

you might want to print it for reference during the install.

http://www.techhandbook.com/windows/...g-Windows.html

3 more replies
Answer Match 44.1%

guyz, my computer run to slow maybe lots of uncessarry file was undeleted. i just wanted to reformat my computer... can u help me by sending a procedure on how to reformat my computer and what cd should i be needed..

A:step in reformatting a computer

what op system
you list it as 98 at the side but posted in xp section

4 more replies
Answer Match 44.1%

So i just recently purchased a new computer and i got that blue screen so i decided to reformat. when i boot from the cd it gets to the screen inquiring if i want to install windows (enter), repair windows (r), and one other option.

after i hit enter, it goes to a blue screen and at the bottom it says examining fjsdklfsafdsa (i dont rememeber exactly what)

I think its examining my hard drive but it wont get past there. i left it on overnight and nothing changed from that screen.

I reformatted my laptop right after this to see if it was an issue with the cd but my laptop reformatted just fine.

Both the cd and OS are windows xp for both the laptop and desktop. I just reformatted my laptop to test the cd and make sure it was good.

Is there any way i can reformat my computer without wiping my hd? i have it partitioned right now and would like to save the stuff on my other partition since i didnt get a chance to back it up before my computer died.

Please help me resolve this situation, if more info is needed please just let me know and ill find whatever i can. Thanks!

A:Computer gets stuck when reformatting

anyone? please, your help would be much appreciated.

3 more replies
Answer Match 44.1%

So usually when I would reformat my computer I would put the first cd of norton ghost image disk after the computer restart and there would be that black screen that appear and asking me to type any command to make it work so I did and nothing happened so I tried again and it asked me to type the right command.

I remember last time my friend did it he type something after the black screen appear and it show the norton ghost screen to reformat the comp with the image disk so if someone could please help me out here and tell me what is the command that I need to type to access to the norton ghost screen to reformat my computer I would really appreciate.

PS sorry for my poor English im still learning it
 

A:Computer reformatting problem

Bump
 

2 more replies
Answer Match 44.1%

Have a Dell 410 XPS with vista that I would like to reformat. What is the proper procedure for reformatting both the C and D drives. My reinstallation disk has more options than the reinstalation disks that came with my old Compaq(it had 2 cds and no otions). The manual that came with my computer is rather vague about this. I know this can be a long drawn out affair, and have backed up all my info and would like to clean my computer out and bring it back to like it was the day I got it. Yes I do have some major issues with my computer that requires me to reformat, mostly caused by me.
thanks mike

A:Reformatting A Dell 410 Computer

I did a Dell today that used F8 to access the recovery partition. That should be the quickest way to reformat your Dell and will leave the recovery partition intact (along with the Tools partition if you have one).

If you'd like to get rid of all partitions, then you'll have to delete the partitions and create one partition to hold everything. Then you can install Vista with the Operating System, Drivers, and Utilities disks that came with your Dell.

Personally, I'd go with the first option above - it's quicker and you won't have to install all the drivers and applications.

1 more replies
Answer Match 44.1%

I'd like to know if my computer is completely safe. I found and removed some virus's and adware using malwarebytes and superantispyware. But I'd like to know 100% its completely safe to put in my personal info.

More replies
Answer Match 44.1%

basically the question i have is this,

before i reformat my computer im suppose to save all the data i want correct? If so can i save my files to another internal hard drive in my computer?

Also do i have to move the files to my other hardrive in a special way? or do i just drag and drop the files i want to keep? (Example: If i wanted to move an episode of bleach, do i just drag it from one harddrive to another?)
Or do i just use (Start>>AllPrograms>>Accessories>>System Tools>> Back Up) to back up my files?

Last question.
After i reformat my computer, do i have to reinstall my internt connection? Im using Verison Wireless DSL. And if i do have to reinstall it, does anyone know how i can get another installation disk? i lost my it quite a while back :(

Ty in advance


~~The Almight Choad~~

A:Question about reformatting my computer.

Quote:




before i reformat my computer im suppose to save all the data i want correct?




Yes
Quote:




If so can i save my files to another internal hard drive in my computer?




Yes, but be careful that you do not accidently format the wrong hard drive. I would recommend after moving all files over to your second drive, disconnect it before reinstalling windows to avoid the possibility of erasing it by accident
Quote:




Also do i have to move the files to my other hardrive in a special way? or do i just drag and drop the files i want to keep?




The easiest way would be to drag and drop, but would only be possible if the two harddrives are on seperate IDE channels. If they are on the same channel, you run a high risk of losing data. I had 2 harddrives on the same channel a while back and ended up losing about 10GB of data.
Quote:




After i reformat my computer, do i have to reinstall my internt connection? Im using Verison Wireless DSL. And if i do have to reinstall it, does anyone know how i can get another installation disk? i lost my it quite a while back :(




You will need to reinstall your drivers, not the network connection. The driver is the software that tells your computer how to interact with your network card. Along with the network driver you will also need to reinstall your video, sound, and motherboard drivers.

18 more replies
Answer Match 44.1%

I have reformatted my hard drive and went to Dells website to download all of the specific drivers. Everything has worked except the sound.
I know it is Soundmax which they had on their website. I downloaded it and was installing soundmax and got the error-"Error Loading Streamci.dll. The specificed module could not be found." Would not go any further. Can anyone help?
I really want my sound.
I have a Dell Dimension 2400.Thanks.
 

A:No sound after reformatting computer

What version Windows and Service Pack level are you running?
 

23 more replies
Answer Match 44.1%

On my other computer, Sony Vaio Laptop...just recently it's been consantly shutting down everytime I run a big program, or sometimes just shutting off by myself. So I was guessing it was a virus, so I reformatted my computer, since that's the only way I know how to fix it. So in the process of reformatting it, it still was shutting down. So it took like 10 tries reformatting computer till it finally finished. Well, now that my computer has finally been reformatted, everything deleted in C and D drive n' all, my computer still shuts down. Does anyone know the problem? thank you
 

A:Computer Shuts Down EVEN after Reformatting

bad battery or PSU would be my first guess, but I'm sure you have tried running off each to see.
 

4 more replies
Answer Match 44.1%

Hi everyone,

I've been receiving these few BSODs for many months. I've tried running memtest and update as many drivers as i can but to no avail. I've just reformatted my computer yesterday but still facing the same problem

The BSODs are:

-Page fault in nonpaged area
- System service exception
- Irql_not_less_or_equal
- Bad pool header

Many thanks in advance

A:BSOD even after reformatting computer.

STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION
Usual causes: System service, Device driver, graphics driver, ?memory

STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility

- Uninstall Norton. They are known to cause BSODs

Code:
Start Menu\Programs\Norton Online Backup Public:Start Menu\Programs\Norton Online Backup Public
Recommended to use Microsoft Security Essential from BSOD perspective, and Malwarebytes
Microsoft Security Essentials - Microsoft Windows
Malwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and trojans, plus it protects your computer

- Do a series of testing using memtest86+. Bad RAM chip could be one of the cause here
RAM - Test with Memtest86+
Pay attention to #3, do the test for at least 8 passes

- Update these drivers as they are pretty old. Outdated driver sometimes cause crashes which is fixed thru update

Code:
Image path: \SystemRoot\system32\DRIVERS\mwlPSDVDisk.sys
Image name: mwlPSDVDisk.sys
Timestamp: Tue Jun 02 17:15:29 2009 (4A24FBC1)
mwlPSDVDisk.sys Driver Download Page

Code:
Image path: \SystemRoot\system32\DRIVERS\iaStor.sys
Image name: iaStor.sys
Timestamp: Thu Dec 10 08:39:43 2009 (4B20515F)
iaStor.sys Driver Download Page

You can find the rest of the info here: Driver Reference Table (DRT)


Code:
Image path: \SystemRoot\system32\DRIVERS\mwlPSDNServ.sys
... Read more

3 more replies
Answer Match 44.1%

Dvk01 in Virus & Other Malware Removal, was not able to find a solution to my Trojan. Suggested reformatting to clean and get rid of whatever it is. Any suggestions on the best way to do this? Iím planning on saving my files to the separate hard drive. Dvk01 said that should not be infected.

Iím at work now, Iíll run the TSG when I get home in about an hour.

Thank you for any suggestions you can add. Below is the computer Iím looking at reformatting.

HP Pavilion dv6000
Microsoft W. XP
Version 2002
Service Pack 3
HP
AMD Turion 64X2 Mobile TL-50
803MHz 960MB of Ram.
 

A:Solved: help reformatting my computer.

16 more replies
Answer Match 44.1%

By the time my job finally got around to approving letting me get a new computer (for personal use), Vista was already out. I do NOT want to use Vista (and I'm pretty xx at my job now for xx me around for two months with the approval process when it should have taken two weeks, maximum).

Would it be feasible for me to reformat the hard drive and then install Windows XP? I'm not really sure what to do about all this, but I just do NOT want Vista... but I also don't want to screw up a brand new computer.

Thank you in advance for your help and advice.

A:New computer with Vista... and reformatting?

I dont see a problem with that. Most of the hardware thats compatible with vista should work fine with xp.

Just boot from an xp cd and format and install.

2 more replies
Answer Match 43.68%

I'm trying to reformat my mother's Win 7 computer. I have never done this without the old disk method. I believe what she started with was restoring it to factory settings, and it seemed to work well. When it finally finished though, it said that there was an error and started all over again. Now that is all it does. It goes through the process of reformatting, and when it is done it reports an error and starts over again. I have no idea what to do and can't find any information on this happening. The reason that we decided to reformat in the beginning was that she was experiencing severe lag when using the internet (without any internet service or connection problems) and could not get rid of a Chrome issue where it would continue to generate ads whenever she did anything (not sure if it was a virus, malware, ad-ware, etc.). Any information on what should be done or possible fixes would be greatly appreciated. Thank you in advance for your time.

A:Win 7 computer won't stop reformatting/ restoring.

Too bad you did not come earlier because I think your 2 problems could have been easily fixed. Nevertheless, now I suggest you do the following:

1. Boot from your installation disk and run Command prompt from there

Command Prompt at Startup

2. Run these commands:



   Note
Important: That will erase all partitions on this disk. If there are other partitions on the same disk, we have to do something different.


Diskpart
List disk
Select disk n (where n is the number that was given for your disk in List disk)
Clean
Create partition primary
Format fs=ntfs quick
Active
Exit

3. Try to reinstall now.

6 more replies
Answer Match 43.68%

Hi,

For another computer, I have two maxtor harddrives connected via IDE to a P4P800-E Asus motherboard.

When booting up, the system goes through some check with something called "FastBuild" which I have never heard about. I think it may have something to do with having the two harddrives work together. This computer here was bought used so maybe the previous user customized the bios?

Anyway, if I try to reformat as usual, running the Win XP Pro Cd while booting up, and install as usual, the setup files load up fine. Then, when I hit enter (to setup Win XP), there's a 25 second delay where the bottom of the screen (grey area) says "Please Wait..." and then the screen loads up where it should show my partitions and allow me to choose which to install.

THere's no highlight bar - instead, it says
"Unknown Disk"
<this drive cannot be found>
and it says this twice - I'm assuming because I have two of these harddrives - both of which cannot be read.

So 'delete partition' doesn't work - so my only option is Enter = Install.

Then the following message comes up:

"A problem has been detected and windows has been shut down to prevent damage to your computer

THe problem seems to be caused by the following file: setupdd.sys

PAGE_FAULT_IN_NONPAGED_AREA

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure ... Read more

A:Solved: Trouble reformatting a used computer

16 more replies
Answer Match 43.68%

I am making this thread so that if there's anybody who knows of good manuals or tutorials, they can suggest them. I am actualyl being helped my Cookiegal and flavallee but I just want any suggestions. So please don't delete or move this thread! Thanks
Well, is it more like I reformat all of my drives or just my C drive?
I'm quite confused on that. Also, what does it mean to partition??? I saw another old thread about partitioning and it quite confused me. What do I do with partitions? And should I follow what this person did in this thread: http://forums.techguy.org/hardware/803662-c-drive-partitioning.html

This is probably important as well: if I have to partition my CD, is there a way to do it with no explorer.exe? That process won't start up properly and that's why I want to reformat..

Also, can anyone tell me if I should be aware of anything while reformatting? For example, should I insert the XP install CD after I delete everything and before I restart the computer? I read some manuals but they were all completely different. I liked this one: http://www.ehow.com/how_6026_format-hard-drive.html
but I'm kind of scared to follow it because of the comments.

In all, if anyone can find a specific manual at techguy or on the internet, that would be swell
Thanks in advance!
 

A:Solved: Quick! Reformatting my computer

7 more replies
Answer Match 43.68%

I've come across a virus that i am not able to get rid of & reformatting my computer is the only option. Problem is, i don't know how to reformat my computer. Can someone please instruct me on what to do. Help is greatly appreciated
 

A:Solved: Reformatting of computer due to virus

7 more replies
Answer Match 43.68%

Hey guys I have a weird problem here, my computer reverted it's settings like the day after reformatting it which was 2 weeks ago, don't know why. My installed applications still here but the desktop shortcuts, pinned programs in the taskbar are missing, browsers are still here but the history, cache, add-ons, extensions and every settings for the browsers are deleted, it's like a newly installed one. Also a weird problem with the theme, currently on safe mode (just wanted to go to safe mode), my theme is like Windows XP, don't know that status in normal mode yet. Also before I can get to the desktop, it say's "Welcome" and then after that, this word appeared "Preparing your Desktop". I didn't do anything that will restore the PC to the date of reformatting it.

Edit: I know the reason, my PC did a system recover not restore without my interaction or anyone's interaction, what I did earlier was, plug the cables to the socket, turn on the PC and then selected safe mode (just wanted), while loading files, I went away for a while (don't know what's happening), after coming back, it was on the desktop, noticed shortcuts are missing but files are still there (working), restarted it, noticed that the "Preparing your Desktop" is appearing on the welcome screen. Will do system restore now, and see if every settings, files, etc., is restored, if it works, I need to know what caused my PC to do a system recover without my interaction or anyone's interactio... Read more

A:Computer reverted it's settings like the day after reformatting it.

Ok, just a sitrep, I'm on normal mode now, every setting and shortcuts are restored thanks to system restore, now I only need to know is why recovery manager did it's job without my interaction or anyones interaction.

9 more replies
Answer Match 43.68%

So my desktop croaked, and my best guess was to just reformat. However, due to boot issues, I cannot do this from the desktop. So I pulled the master HDD (since I also have a slave) and hooked it up to my laptop with a HD casing via USB. I have the proper Dell XP Pro SP3 disk, and I was advised to type the following into "run" to get the laptop to reformat the desktop's HDD:

"

D:\I386\winnt32.exe /syspart:G: /tempdrive:G: /makelocalsource /noreboot

"

D:\ being the path assigned to the disk drive and G:\ to the HDD.

Unfortunately this has not worked. For whatever reason I keep getting the message "Cannot install CGIPLUS.CA_", along with about a dozen other files. The problem seems to be that "All values are zero", and, although I cannot find any of these files on the disk, they seem to at least exist. I thought I could just skip the step and add the necessary files via the laptop, but at the end it tells me the reformat failed because it could not install these files. In the end I spend about 30 minutes getting no where.

I also get these exact same messages when trying to install using the Dell XP Pro SP2 disk, so I sincerely doubt it has anything to do with the OSCD's.

I realize I can completely reformat the drive from the laptop by just right clicking on the "G:" icon under My Computer and clicking "format", wipe it completelyl clean, put it back into the desktop, and try installing windows from s... Read more

A:Reformatting a master HDD with a disk from another computer

15 more replies
Answer Match 43.68%

I just tried to reinstall windows xp on my computer and during the installation my computer crashed. At first, it booted up fine and I tried to reinstall windows again. During the second re-installation attempt the progress just stopped so I restarted the computer. During the third attempt, when the setup was copying files over, there was a file that could not be copied over. So I exited setup and I was going to try to reinstall it again, but now it won't boot from the cd drive. I cannot boot from the hd either, it says that the NTLDR is missing. I do not know what to do. Please help me.

A:[SOLVED] Computer Crash During Reformatting

hi, how old is the pc? you need to clean the xp cd it might have ome dirt or scratches that is preventing you from installing it. aan easy option would be is to take the cd to another computer then right click on the cd drive click explore and copy all the files and burn them as an iso using power iso.
http://www.poweriso.com/

regarding the pc not booting from the cd you need to access the bios. when your pc is booting press the del key or tab, f10, f12 it should work on the del key or f1 just try a couple of them it will work.
then find the boot option and change the device order so that it boot from
cd
then hd
and then click save changes. now switch off pc turn back on it should be able to read the disk. ntdlr that is the file used to boot cd.
you can fix that by going to recovery console and copying the file over but at the moment try the things above then think about changign the files because you have already formatted your pc.

3 more replies
Answer Match 43.68%

I've been building a desktop at home and it seems the BSODs just never stop coming. as soon as I fix one a new one appears. I'm considering reformatting to see if that does anything. Any ideas on that? Will it help? this is the most recent BSOD:

==================================================
Dump File : 100610-22198-01.dmp
Crash Time : 10/6/2010 5:08:40 AM
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code : 0x00000050
Parameter 1 : fffff880`07ed50c8
Parameter 2 : 00000000`00000000
Parameter 3 : fffff880`10d7c25e
Parameter 4 : 00000000`00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+70740
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16617 (win7_gdr.100618-1621)
Processor : x64
Computer Name :
Full Path : C:\Windows\Minidump\100610-22198-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7600
==================================================

Happened while browsing the internet.

A:Stubborn Computer BSODs and reformatting.

Please perform the following, so that we can get the exact specs of your computer. This will better assist us in helping you more.Publish a Snapshot using SpeccyThe below is for those who cannot get onlinePlease take caution when attaching a text file to your post if you cannot copy/paste the link to your post, you will need to edit it to make sure that your Windows Key is not present.

33 more replies
Answer Match 43.68%

I have a Xp Pro computer that needs a reformat and a fresh install , however , I do not have the copy of Xp pro that was installed on the computer but I know it was a retail copy. I do however have a copy of Xp pro that I used on another computer and was wondering if I could use that one to do a clean install on the computer that I plan to reformat? The only problem is I dont have the Product activation for the computer I am planning on reformatting.

Where can I find the number I need when it asks for my product key? And before I go any further , can I use my copy of XP pro for another computer considering they are both running Xp pro but from different discs?

Any help on this would be great and hopefully I explained what I am doing well enough

Thankyou

A:Reformatting Xp computer ?'s And clean install

When you first had your computer with the original xp, generally there would have been a little sticker "windows xp pro OEM" followed by a serial number stuck to the box. You can install with any copy and just use that number,

12 more replies
Answer Match 43.26%

(continues description: "EVERYTIME!!")Malware Forum Discussion with m0leHello all,My computer is ruining my life (okay.. that's a little dramatic... but in all honesty it REALLY sucks right now), so any help anyone can offer would be GREATLY appreciated!My computer (at work) has been running VERY slowly for a while now, I was assuming it was just a RAM issue, but m0le said it shouldn't be and I should check here for any answers... I'm not exactly sure what I should include on this post, but if anyone has any specific questions I'd be more than happy to answer any of them as quickly as possible!The main problem, as my "topic description" states, is that every time I attempt to multi-task my computer pretty much freaks the bleep out... It lags, flashes screens periodically, and then does that thing where it makes your window look all ghost-y and u can't click anything cause it's "thinking"... a few moments later it'll either crash or just start working... while having it work after a few moments of "thinking" isn't the ABSOLUTE WORST it really does add on a lot of extra time to my work day, not to mention it's just irritating lol, I'm sure someone here can agree!Anyway, like I said, I'm not sure what information anyone would need to help me w/this... but please do not hesitate to ask and I'll try to respond as quickly as possible!Thanks everyone!Ash

A:sent by m0le, slow computer even after reformatting, no malware

Have you checked task manager for CPU usage (for a specific program) and for available RAM. If your CPU usage is low and you have enough RAM, then you can try downloading SpeedFAN to check your system temperatures.http://www.almico.com/speedfan.php

2 more replies
Answer Match 43.26%

Last spring, I had Windows 10 downloaded to my computer by one of those popup windows which apparently said do u want to download updates in 10 minutes, 1 hr, or 4 hrs? While I was gone, Windows 10 downloaded to my computer and
when I got home, I had windows 10 on my computer instead of Win 7 Pro.

2 weeks ago, I signed on email one morning and that was all I could do. Outlook would work, but I could not access and
websites; only Outlook. Tried several things but could never get IE, or other browsers to work. I reformatted the computer
which took it back to Win 7 Pro. Since the deadline is past, I don't seem to be able to get win 10 back, without purchasing a DVD? Anyone have any ideas?

A:How do I get the free Windows 10 back after Reformatting Computer?

The install media for windows 10 is freely downloadable from Microsoft. Because you took the free upgrade you now have a digital licence recorded on Microsoft's activation severs, tied to your PC's hardware. You can do a clean install and it will activate automatically. You don't need to enter a product key, just click 'I don't have one' when asked.

Instructions on how to get a bootable USB and how to do the clean install are in this Tutorial.
Windows 10 - Clean Install

0 more replies
Answer Match 43.26%

I completely reformatted my computer and reinstalled all Windows updates and afterward, Avast! found some viruses and malware during a scheduled boot scan. i was a little concerned, so i thought i would post a hijackthis! log. just to be safe that i wasn't removing any needed Windows files that the scheduled boot scan found, i moved all files to the virus vault of Avast!.

here are the files that are in my Avast! Virus Vault:

i can restore these files. so please let me know if i need any of the files in this vault, otherwise i will just remove them.
here is my hijackthis log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:26:24 PM, on 11/21/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Alwil Software\Avast4\ashMaiSv.exe
C:\Program ... Read more

More replies
Answer Match 43.26%

I completely reformatted my computer and reinstalled all Windows updates and afterward, Avast! found some viruses and malware during a scheduled boot scan. i was a little concerned, so i thought i would post a hijackthis! log. just to be safe that i wasn't removing any needed Windows files that the scheduled boot scan found, i moved all files to the virus vault of Avast!.

here are the files that are in my Avast! Virus Vault:



i can restore these files. so please let me know if i need any of the files in this vault, otherwise i will just remove them.


here is my hijackthis log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:26:24 PM, on 11/21/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Alwil Software\A... Read more

A:Viruses found after reformatting computer - my hijackthis log

Hello and welcome to TSF.

Apologies for the delay in response. If you haven?t received help elsewhere already and still require assistance, please post the logs requested in our pre-posting process outlined below:

NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help

Please subscribe to this thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Subscribe.

Please note that the forum is very busy and if I don?t hear from you in three days this thread will be closed.

2 more replies
Answer Match 43.26%

Hey all.
I have been having problems with my computer for a while, since some of the system 32 files had corrupted due to a virus, and I couldn't connect it to the internet because the person who installed my OS had used a dodgy copy of Windows XP, instead of the new one I gave him. It just caused a ton of problems with the internet, but the computer worked fine when it wasn't connected.

However, it got to the point where we really needed the internet, so I sent my computer off to another friend, who works with computers, to have it reformatted, and a new copy of Windows XP professional installed. When it came back to me, everything seemed fine, the computer worked faster, and my friend had installed another hard disk, free of charge.

But then we found that we had no sound. And, according to PC Wizard, and Windows Media Player, the sound device wasn't even there. It had disappeared, whilst still being very much soldered onto the motherboard.
We had never had problems with the sound card before, so I searched the internet to try to find a solution. I also asked the lady at my local computer shop if she knew what to do, and she said that I probably just needed to reinstall the motherboard drivers. So I went back on the net and searched for my motherboard, and downloaded the drivers for it.

No sound...
So I went onto the net and searched for the problem, and a few sites (including TechSpot) had threads with similar problems. I found one where the per... Read more

A:Sound card 'disappeared' after reformatting computer

Thank you for replying, Zenosincks. You assumed correctly. I went onto ASRock's site, searched for my motherboard's make, and downloaded the chipset drivers, then went back on and downloaded the audio drivers. I used the europe server, as advised. Thank you anyway.
 

3 more replies
Answer Match 43.26%

Hi there, Could you please help me how to reformat my computer to factory setting?  Here are the details: a.  HPPavilion p6320ab.  OS- Windows 7 Home Penitum 64 bitsc.  Processor - Pentium (R) Dual Core  Also is there a posibility to convert/upgrade it to Windows 8? I am not a computer expert.  Kindly help me please. Thanks in advance. Ging











Solved!
View Solution.

A:Reformatting my computer to factory settings - HP Pavilion p...

Hi,1. Unless you have deleted the Recovery partition on your machine, otherwise your machine should have a Recovery partition. Make sure backing up all of your files before restoring the PC/laptop to factory settings.To set your PC/laptop to factory settings, restart the PC/laptop. At the HP welcome screen hit repeatly the F11 key (or Esc key) to launch the recovery process. Follow the instructions provided on the screen. 2. My suggestion: keep Windows 7, you will be disappointed with Windows 8. But if you wish, Microsoft has a tool which is similar to Windows 7 Advisor for Windows 8 called Windows 8 Upgrade Assisstant . Please download the Assisstant and run on your machine:   http://windows.microsoft.com/en-US/windows-8/upgrade-to-windows-8   You have to buy upgrade to Windows 8 from Microsoft (download) or from many computer shops (DVD's). Regards.

5 more replies
Answer Match 43.26%

Hi,

Specs:
OS Windows 7 Ultimate x64
CPU Intel Core 2 Duo E6600 @ 2.4GHz
Motherboard Gigabyte 965P-DS3
Memory 4 GB DDR2-SDRAM PC-5300
Graphics Card MSI N560GTX Twin Frozr II
Sound Card -
Monitor(s) Displays Samsung T240


PSU Coolermaster 550W
Case Coolermaster
Cooling Stock
Hard Drives Seagate Barracuda 7200 320 GB WD Caviar Green 1 TB


My computer was stuttering badly recently. It runs smoothly in games like FIFA 12 initially, but after a period of time (could be 5 minutes or an hour), the game starts to stutter. FPS doesn't really drop but the game stutters so badly I couldn't even play it. As I exit and try to load Skyrim, the initial loading might take up to 5 minutes, which is incredulous even when loading the world map.

That aside, Firefox was also stuttering whenever I tried to scroll, be it a page full of graphics, a text file or pdf.

All these problems could be 'reset' by restarting my computer but the symptoms just come back soon after.

Thought I might have too many programs installed, so I decided to reformat my computer and reinstall a clean copy of Windows 7 Ultimate x64. Didn't really help though. After installing all my drivers, the problems persist.

I am currently using AVG as anti-virus and didn't detect any rootkit virus or anything.

My CPU temperatures are fairly normal for Core 2 Duo E6600, doesn't go past 60C in the tropics. The CPU loads <10% when idle and max out when playing games. Same goes for GPU. ... Read more

A:Computer stuttering in Windows 7 - Reformatting doesn't help

60c is like the max temperature for that processor, it might be throttling down to prevent damage, try cleanning the heatink leaving it dust free and apply a fresh coat of thermal insulation material like artic silver 5.

3 more replies
Answer Match 43.26%

My computer is infected with the Vundo.D.27 virus even though it was reformatted. I've used Avira and SuperAntiSpyware and it still won't help me resolve the problem. My sound system also doesn't work - not sure if it's due to the driver or the virus, but I suspect the latter.

Here is the contents of my DDS file:


DDS (Ver_09-02-01.01) - NTFSx86
Run by Henry at 21:49:32.00 on Mon 02/16/2009
Internet Explorer: 6.0.2900.2180 BrowserJavaVersion: 1.6.0_11
Microsoft Windows XP Professional 5.1.2600.2.1252.1.1033.18.767.422 [GMT -8:00]

AV: Avira AntiVir PersonalEdition *On-access scanning enabled* (Updated)

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Avira\AntiVir PersonalEdition Classic\sched.exe
svchost.exe
C:\Program Files\Avira\AntiVir PersonalEdition Classic\avguard.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe -k imgsvc
C:\Program Files\Linksys Wireless-G PCI Wireless Network Monitor\WLService.exe
C:\Program Files\Linksys Wireless-G PCI Wireless Network Monitor\WMP54Gv4.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\WINDOWS\Mixer.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\Program File... Read more

A:[SOLVED] Computer infected with Vundo.D.27 even after reformatting

Hi gwr922,

You appear to have run Combofix. Could you please post the Combofix log? It's located at C:\Combofix.txt

Thanks.

15 more replies
Answer Match 43.26%

First of all, let me say that I am not good with computers. I just read about how to reformat on this site. Anyways:

So this computer is less than a month old. I had some problems with my game, where it would freeze for a split second every 10 seconds. I checked to make sure it wasnt a connection problem, and even in offline mode it happened. Well, i tried restoring, and i still had the problem. So anyways, i decided to reformat. I think this is where i mightv screwed up. I ordered this computer from cyberpowerpc.com. However, i used the Windows XP installation CD that came with my old dell. Anyways, i deleted my old partition, made a new one, and everything was going fine until it was setting up windows XP. It said "Some files are needed from the Windows XP CD-ROM" or something like that. I clicked OK, and nothing happend. At that point i noticed that I couldn't open or close my dvd rom drives. I pressed cancel, and it installed the rest of windows. It logged me on, but now i have the windows classic scheme, and i dont even ahve internet explorer or windows media player or anything. I dont even have the pictures for my user. I really am lost, and none of my cd drives work when i am logged on. Any help would be greatly appreciated.

EDIT: i forgot, now my first dvd drive wont even open/close even during the boot sequence....

A:So i tried reformatting my computer...and now i dont even have internet explorer

disc shouldn't be the matter, i was able to use my dell disc to put XP on my old old computer just fine.

2 more replies
Answer Match 42.84%

If i just slightly lift up right corner of laptop or the right side of it, a bunch of long, rectangular sections show up. The rectangles are about 10 mm in height, length about 2 inches. The computer freezes when this happens, have to shut it down. Start it up again, without moving laptop at all, will run fine for 20 mins. or so, then will get blue screen, windows shutting down. I`ve troubleshooted for 7 days now, can`t figure it out.

A:strange monitor problem, help!!!!

It sounds like a short in the case IMO. But please do this with the BSOD info:





Upload Dump Files:
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service (not RapidShare as the analysts usually can't download from it) - then post the link to it.
Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDump



Also, please provide this report:





MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.

If you're having difficulties with the format, please open an ele... Read more

6 more replies
Answer Match 42.84%

This is a minor quirk I've lived with for years on my XO PC but it's become worse in Win 10.

My Ilyama Prolite E2403WS 24" monitor is set to its recommended resolution of 1920 x 1200, and naturally that's supposed to be located at (0,0). But in XP it was always at (-4,-4) and its size was 1928 x 1208. In Win 10 it's at (-8,-8) and size is 1936 x 1216.

Any thoughts on the undelying cause please? And - although I'm very doubtful after my research - a possible cure?

--
Terry, East Grinstead, UK

More replies
Answer Match 42.84%

Recently got a 19&#8221; LCD Monitor (Neovo F419), and ran into a problem with way Word2000 looks.
I usually set all margins on the standard 8.5x11&#8221; paper at one inch (the &#8220;Gutter&#8221;&#8212;whatever that is&#8212;is set at zero inches), and between the right margin scrollbar and the edge of the text there is a gap of about 5.25 inches. Is such a space normal with this size and larger monitors?

Fonts generally used are Bookman Old Style (Much easier to read than Times New Roman), Georgia, and Times New Roman&#8212;all at font size 12.

Currently running monitor at 1024x768, 32-bit color, & 60 Hz Refresh, though I can use 75Hz., have tried it at the full 1280x1024 setting, but desktop & Word2000 fonts look like they&#8217;re about size 6 (maybe less?) so I use 1024x768.
 

A:NEW MONITOR -- Now WORD2000 looks strange

15 more replies
Answer Match 42.84%

Hi there:

I've been having dotted horizontal lines on my monitor for awhile now( see attached picture). Those are more visable when playing games like Flight Simulator.

I even changed my cable to DVI ,and upgraded video card ( nVIDIA GeForce GTX280) to the latest drivers.

What you think those could be? I know it's not overheating. Could it be a bad video card or monitor?

I have Windows Vista x64 on an Asus P6T Deluxe Intel X58 motherboard with 12GB RAM and an Intel i7 Extreme processor 965 with a Sceptre widescreen 22" monitor and a Thermaltake V1 cooling Fan with 800 watts power supply.

Any help is appreciated...

Thanks, Kaue.

A:Strange lines on monitor

I don't see anything.

3 more replies
Answer Match 42.84%

Hi everyone.

I have a question, if can please help.

Monitor : L222WS Flatron 22 inch
Graphic Card : 8800 GT
Resolution : 1680x1050

I newly bought this computer and all with it and few days ago every time i started up computer icons on the far left side of monitor are kind of moved more to left, like outside the monitor. I tried to do manual adjustment and that didn't work either. Also the icons are visible behind left black part of the screen (not the darkest black, some dark gray).

2nd problem is that when i put my mouse cursor to that far left side of the monitor and if i slide up and down on the gray area, the black line follows cursor trough all the screen. I managed to solve this problem by changing settings to 1440x900 resolution and then reapply 1680x1050.

If anyone know how to fix this issues i would really appreciate it.

Thanks in advance.
 

A:LCD monitor & strange line

12 more replies
Answer Match 42.84%

Hey all, I attached a pic of what my monitor looks like. It looks like this at all the startup screens also. It will stay like this for about 15 mins, then return to normal. I have tried reloading and getting the newest drivers for the graphics card and monitor, also tried it on my other computer. Other monitors work on both computers just fine. It makes a high pitched noise when the screen is jumbled like that, so I am thinking it may be a component problem. Of course it went out of warranty about 2 weeks before this happened so technical support was denied. Thanks for looking, any guesses?
 

A:Strange Monitor Problem

JWeber said:



Hey all, I attached a pic of what my monitor looks like. It looks like this at all the startup screens also. It will stay like this for about 15 mins, then return to normal. I have tried reloading and getting the newest drivers for the graphics card and monitor, also tried it on my other computer. Other monitors work on both computers just fine. It makes a high pitched noise when the screen is jumbled like that, so I am thinking it may be a component problem. Of course it went out of warranty about 2 weeks before this happened so technical support was denied. Thanks for looking, any guesses?Click to expand...

They all made high pitch noises when the display is like that, in typical newer monitors they simply just go blank with nothing at all or a typical message "out of range".

Leaving it like that slightly too long will often blow out the monitors permanently. Check your video cable for poor connection, loosen, or broken pins. Hacked video BIOS also often screwed-up video outs just like that.
 

4 more replies
Answer Match 42.84%

I have a 6 month old iiyama 17" monitor which has just
started to randomly switch into a blank-screen mode
(you can hear the monitor "mode-click") - possibly a
power saving mode? The power light stays on, but the
image only comes back if you switch off and on again.

As the monitor warms up, the screen blanks more
and more frequently (seconds), and even blanks
during the machine BIOS boot stage (so it isn't
windows). I have tried it with a second video card,
and even a second machine, and its definitely the
monitor...

Now obviously the monitor is still under guarentee, but
the previous monitor I had (different brand) did exactly
the same thing after about 4 years. Is this horrible
coincidence, or is there something more sinister that
might be affecting the monitor?
 

A:Strange monitor problems ...

Hi swarr

Yes it sounds like the monitor is going bad. You might want to get a surge supressor for your AC line if you don't have one. But you probably just got a bad monitor. At least its still under warranty!
 

1 more replies
Answer Match 42.84%

my monitor seems to have these colored dots around my screen and black smuges (shown in the attached pics) and the dots are in them. I heard the dots could be stuck pixels but idk how to fix them (Or even if its that) and sometimes text seems to like shiver
 

A:Monitor acting strange

Hi,

Is your contrast set to high at all?

Also if you graphics card hot at all?
I think it could be the monitor acting up. How old is it?

Jay
 

3 more replies
Answer Match 42.84%

I woke up this morning and my monitor won't work. I checked the connections and nothing. I hooked another monitor up to the computer and it works fine. Then I hooked the "bad" one to another computer and it works fine on that computer. What would be causing this? I've run a virus scan and disk check and nothing is wrong there. The "bad" monitor comes out of power save mode (yellow light turns green) when you move the mouse just like it should but the screen stays black. You can hear it make the staticy noise and hear the power kick in like it should. I tried hooking the "bad" monitor up with both the normal cable and R, G, B, Bl, Wh connection and neither work on my computer (but they both work on another PC).
 

A:Strange Monitor Problem

Does it show your POST (Power On Self Test) & the Windows startup screens ?
If its just the desktop not showing , it could be a refresh rate problem or the resolution of your desktop is set to high to be displayed by your monitor.

Wow Spell Checker didn't find any mistakes
 

3 more replies
Answer Match 42.84%

Hello, i'm back with another problem.

my new monitors ViewSonic VA912 and Digimate L1916 are getting quite strange. especially the Viewsonic one. when itry to use them together(NVIDIA 7300GT agp) i use DVI for my digimate and D-sub for the viewsonic one. the digimate works good, all the times and when both monitors are plugged, but the problem:

when i press ON button to power Comp, my digimate works, viewsonic dosen't. when the windows loading screen starts, my viewsonic appears to work. when the windows loading ends, its getting off again and beeping all the time! while the digimate is working properly. so what's the deal?

P.S. the first time i plugged both the viewsonic worked very good, but when the screen saver came, i couldn't take it on again(it stucked on the screen saver) while the digimate works just fine. the digimate is set to monitor 1 and viewsonic set to 2.

Thanks for help!

~bielius
 

A:My monitor is acting strange

Did you figure this out?
 

2 more replies
Answer Match 42.84%

The monitor picture is fuzzy,color bleeds and the entire picture screen has a pink tint.
It is a new 19 screen. The standard stuff already has been messed with to fix it but it remains fuzzy.
Appreciate the help.
 

A:Monitor is doing strange things

What is the standard stuff...refresh rates
etc. If the moniter is new try it on another machine and see how it works. If it has same prob. I would take it back.
 

2 more replies
Answer Match 42.84%

My monitor is as old as my PC (about 3-4 years old), and as Microsoft has available updates I download and install those. But over the past year my monitor's been acting crazy.. I have to turn the contrast ALL the way up, and the brightness ALL the way down, and even then everything is way too bright. Black pages don't look black, but dark navy blue or dark brown, and I can see the edges of internet images because of the color difference.

Any clues? It's driving me absolutely nuts.
 

A:Strange monitor behavior

Either the monitor or your graphics card is showing their age via loss of colour.Installing another monitor will determine which is causing the problem but my monies on the monitor.
 

3 more replies
Answer Match 42.84%

I'm using this TV http://www.amazon.com/Sharp-LC22DV17UT-22-Inch-Built-In-Player/dp/B002RZCHF2 as a monitor. I just got it for free from my girlfriend while she's away and am using the VGA cable from my old PC monitor to connect it to my PC and the color just seems off and the picture is grainy. I've tried finding a setting on my computer and using the settings on the TV to get it right but it's just not working out. It is called a Generic Non-PNP monitor but i've set it to the maximum resolution based on the model. Do I need an HDMI cable or is it something else?
 

A:Quality looks strange using my new TV as a monitor.

Many TV's make poor monitors. You should be using a 1366x768 as your resolution. An HDMI cable may not improve the quality, VGA is perfectly fine for such uses, and even the recommended PC input on many TV's.
 

1 more replies
Answer Match 42.84%

Hello everyone. I have a problem that has been making me scratch my head for the last few hours.
 
I have a triple monitor setup so I will usually have a few things going at once - and one of these things include watching game streams on Twitch.tv. Earlier today I noticed this strange glitch on the top left corner of my middle monitor, but then it would disappear when I moved my mouse around a bit. After a lot of trial and error it seems to only appear when I have a stream from Twitch.tv open because otherwise I can't recreate the issue. When I have a stream going it comes and goes and flashes sometimes, but as soon as I close the stream the issue goes away and I can't seem to get it to happen again. I've tried reinstalling Adobe Flash, Firefox, my GPU drivers, none of which seem to do anything special.
 
Any help or insight would be greatly appreciated. I am honestly dumbfounded. If any additional information is required then please feel free to ask and I will provide to the best of my ability. Thanks.

A:Strange monitor glitch?

[off the wall]
Check with twitch.tv to see that your setup is TOTALLY compatible with their feed.
Your troubleshooting appears to eliminate anything else. Be sure your drivers are current.
Keep us posted
 
Dick

1 more replies
Answer Match 42.84%

Monitor goes blank sometimes for no apparent reason. The LCD light starts flashing like its in sleep mode and the only way to get it to come back on is to force a reboot (only happens while gaming). I have updated all drivers and there is no system crash when this happens. If you have any ideas PLEASE let me know



pc is home built.
amd athlon 2.8 duel core black chip
asus m3n72-d mootherboard
geforce 9600 graphics card
2 gigs ddr2
500 gig sata drive
Samsung Syncmaster 210t monitor
 

A:Monitor acting strange, please help

Try another monitor for testing. This will help determine if it is the monitor or the computer
 

5 more replies
Answer Match 42.84%

The Compaq laptop with windows 7 starts up with a black screen, as soon as I start it up it will start the cooling fan but the screen does nothing but just a black screen. Before this happend, I was playing minecraft and then left it and when I came back the computer had automaticly locked, I tried to put my password in then it would not let me type, no keys would come up. I then put down the laptop lid then when I lifted it up again and it just was a black screen, I tried to startup again but still black screen. It is really odd. Do you think it is stuck in hibernation or something?

Thanks

A:Strange Startup - Monitor

Hi itsmei,

It could be the Power Plan Settings. Try changing them; it might help.
Power Plan Settings - Change

Hope this helps,
Jaidyn

3 more replies
Answer Match 42.84%

I did a clean install of XP Pro on my old box.

PII 300MHZ
256MB RAM
CD ROM
CD RW
8 GB HDD
17 inch Sceptre Monitor - currently set up for 800X600 @ 60Hz

When the computer boots up the monitor does not immediately show a picture. It never did this with Win98 SE, and I don't remember this issue starting until recently (about 1 week ago). I have been running XP on this box for several months. I have not added new hardware/software or changed any monitor settings prior to the issue's start. The only change I have made to this box is installing a Linksys 4Port Router on Wednesday night between my new box and this old one. But, the problem had begun before this installation.

This is not a terrible problem, more of an annoyance that I would like to straighten out. Any ideas on how to troubleshoot this? Could this monitor just be crappin' out?

Any input would be greatly appreciated. Thanks everyone!
 

A:Strange Monitor Behavior

We have about 17 of those Sceptres left at work. Everyone of them are exhibiting the behavior that you are describing some to a worse degree than others. The one I am using takes about 15 minutes after being turned on before I can use it.

We have several that take over 30 minutes and then kind of fade in and out for about 15 or 20 minutes. They have been exhibiting this behavior for about a year now, getting progressively worse. We have 6 crap out totally on us. 2 not turning on at all, 1 never showing a picture ever, 2 lost the blue guns, and 1 had such a bad misconvergence that you could no longer read 10 point text without squinting.

These things have not been the best I have ever had, I would keep an eye on it and when you can go ahead and replace it.
 

2 more replies
Answer Match 42.84%

I wasn't sure where to post this at. hope its the right place

My monitor has been acting strange for a while, now its starting to get worse.
It flickers and jumps , almost like if you had a twitch in your eye. Is this weird or what?
Is my monitor going bad?
 

More replies
Answer Match 42.84%

Hey, new to the forums lol, anyway >

A while ago my laptop screen cracked, it got sent away to be repaired, and i got it back about a month ago, something seemed strange, everything had shrunk :S like all the icons task bar etc, and it wasnt the resolution either, the size of those things seems to have returned to normal, however, when i run a full screen game (or anything else for that matter that uses fullscreen) the program resolution is reduced to a tiny block in the middle of the screen, and changing the run by 640x480 or whatever in the properties makes no difference, i've tried updating the Nvidia drivers but with no luck, this as you can guess is getting really annoying -_- when i decide to play Biohazard i cant play properly due to it being SO small, its like this with every full screen app (apart from Tomb Raider which i edited the resoultion for the program using the "-setup" command on a shortcut, but for other things like Biohazard (Yes, i am able to play this on W7 of course with the usual problems) or most other things i cant change the resolution, can anyone help?

(Also, i would take a screenshot but it will only take the part of the screen the game is actually on, obviously)

Thanks
 

A:Strange monitor problem

I really hate to do this.. but.. bump

EDIT - I managed to take a picture of the screen with my phone (sorry for the Low Q) its like that with every fullscreen app, updating drivers doesnt help either,

http://img14.imageshack.us/img14/9171/imag0047ue.jpg
 

1 more replies
Answer Match 42.84%

A friend of mine has a computer which when the monitor is turned off then on again while the computer is running, makes the button section of the monitors picture wobble... When the computer is restarted the picture is fine. The computer and monitor are both Compaq, the only thing that I can think of that may be causing this is when the monitor is turned off then on again that it isn't intializing or something proplery, then when the system is restarted it might be recieveing a signal from the video card... I dunno... Any suggestions?
 

A:Strange Monitor Problem

I turn my monitor off quite frequently at night because it is in my bedroom and never had that problem. First I would look for updated drivers then check to see if the refresh rate may be too high. May have to check the manual to see what the refresh rate should be set at.
 

2 more replies
Answer Match 42.84%

the monitor on my laptop dims when it's unplugged from the mains, obviously to conserve power. but now it does the opposite, it gets brighter when it is unplugged and dims when it's plugged in.

please, if you're going to answer can you give me step by step instructions as i am not fully competent with computers.

Thanks

Dan
 

A:laptop monitor is doing something strange

14 more replies
Answer Match 42.84%

Hey guysmy dad has installed some kind of passive monitor on my computer that has a keylogger and monitors all of my processes. he is also able to block processes and websites from working. i consider myself pretty tech savvy but i cannot seem to be able to reveal what he has installed. i cant figure out wat it is called and there are no new processes in my task manager. so i did a hijack this scan to see if maybe that would pick it up. i know that it is not 023 blue coat k9 web protection...that is something else that i have already figured out how to bypass. so see if u guys can find anything out of the ordinary. thanks in advance!!Logfile of Trend Micro HijackThis v2.0.2Scan saved at 9:37:38 AM, on 1/19/2009Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exeC:\Program Files\Alwil Software\Avast4\aswUpdSv.exeC:\Program Files\Alwil Software\Avast4\ashServ.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceSe... Read more

A:Strange Activity Monitor

Hello soulshardWelcome to BleepingComputer ========================If your dad put the software on the computer why would he want you to remove it?

3 more replies
Answer Match 42.84%

I have these strange colors on my monitor,..i can get into my bios,..and it will boot into my signup page for windows xp pro,..admin.,..but then it boots off and i get this strange colors appearing on my monitor.
I have tested the monitor out on a other computer and it is fine there,.. could this be video card related or motherboard??

Asus A7N8X Motherboard
Asus Ti 4800 Video Card
 

A:Strange colors on my monitor!!!

16 more replies
Answer Match 42.84%

When I turn my PC on, my monitor comes on but I get no picture.

I have to wait until Windows 7 reaches the log-in screen (by listening for the sound) then turn the monitor off and on again, then it works fine.

I've tried this with another monitor and it's exactly the same.

What can cause this?
 

More replies
Answer Match 42.84%

I'm not sure if anyone else has this kind of problem, but let me explain it...

Ok I have a 22" VGA Multiscan E500 Sony Trinitron monitor. This monitor has worked really great for me ever since I got it about 5 years ago... up until now, anyway.

I'm not sure what is causing this, but recently my monitor has been showing funky lines going across the screen. Sometimes they are diagonal, sometimes they are straight. Sometimes there are just a few lines, and sometimes there are a lot.

And this isn't even the only problem...

The other thing is that whenever I turn the monitor on, the screen-size adjustment settings are all screwed up and the screen is either pushed too far to the left or too far to the right or both, or pushed too far up or pushed too far down. Every time I log onto my computer and flip my monitor on, I have to mess with the little screen adjustment buttons under the monitor to fix it again.

This is REALLY annoying me to the point where I just wanna throw this thing out the window and rip my hair out.

Believe me, if I could afford a new monitor right now, I'd just go out and buy one and give this one to my little bro, but I can't afford it at the moment.

Does anyone possibly know what is causing my monitor to do these crazy annoying things?

Please let me know if you have ever had this problem or know how to fix it or if you have any other ideas about it.

Thanks a lot for your time and thanks for reading this.
 

A:Strange Monitor Problem

Good Evening NeoBix , It sounds like your monitor has some kind of problem, but the easiest method of determination would be to try it on another machine.
Cheers, qldit.
 

2 more replies
Answer Match 42.42%

I have been having major issues lately with my HP Pavilion DV6t laptop running Windows 7 Professional. The computer is about 2 years old and has had no issues up until about two weeks ago. At the time, I started to have trouble loading windows 7. The OS would often fail to load and generate a blue screen error and reboot itself before the windows loading screens had completed cycling through. Afterwards, the PC would typically fail to start if I rebooted it again and instead prompt me to run windows repair and/or system restore. At first, running those utilities would fix the issue and the computer would work again for a day or two. However, I found that these problems would just start up again soon afterwards and that I was eventually unable to start up windows at all. 
 
At this point, I was even unable to even boot up safe mode. The drivers for safe mode would start to load but then the loading sequence would eventually freeze up and nothing would happen (often the computer would just crash after a few minutes). After the PC tried to prompt me to do system repair a few times after crashing or producing a BSOD error, it eventually would not work anymore and I would have no way to access windows. It would also not let me conduct system restore after going through the routine of not loading windows a few times.
 
After I got to this point, I decided to just go ahead and reformat the whole computer and ... Read more

A:Computer stops booting Windows 7 Even After Reformatting/Re-installing the OS

Are you getting any error codes when the computer blue screens? Those would be helpful in narrowing down the cause of the problem.

7 more replies
Answer Match 42.42%

After I reformatted the hard drive and laplinked my Canon Inova computer, I was unable to activate my modem. Before formatting, it was on com port 3, after lapinking and upgrading to windows 95 it didn't show a com port 3 as being in the computer(that is it was not detected by the installation wizard when I tried to reinstall my modem.)
How can I get com 3 to be recognized by the wizard and reactivate my modem?
 

A:unable to activate modem after reformatting computer and laplinking.

I don't think it should have changed, but check in your BIOS and make sure it is still set to active. How old is the system? If the setting in the BIOS is changed it's possible your MainBoard battery is getting low.
 

2 more replies