Tech Problem Aggregator

Solved: wheres the ram on a Tosh satelite 1800-654s

Q: Solved: wheres the ram on a Tosh satelite 1800-654s

wheres the ram on a Tosh satelite 1800-654s?

A: Solved: wheres the ram on a Tosh satelite 1800-654s

Does the attached drawing match your computer?

2 more replies
Answer Match 96.18%

hi, this quite a specialist question but when replacing the battery on my tosh satellite 1800-654s the metal clip fell from the undercarriage of the laptop. There are the system connections and then a metal clip which connects to the positive and negative points on the battery. am i right in thinking these are jumpers so as to tell the laptop, the battery is in place. il need to replace these somehow as i now cant run of the battery.

Many thanks

A:Toshiba 1800-654s battery

Got a picture?

3 more replies
Answer Match 57.12%

Just installed a new hard drive in a Toshiba Satellite Pro A10 laptop. I have installed Windows XP which was straightforward. However I haven't got any of the discs that were originally supplied with the machine, and it will not play video or produce any sound. From previous XP installs, I'm thinking that this is motherboard-driver related. I'm not sure what motherboard it has but I think (from looking at Device Manager) that it has an Intel 82852/82855 chipset. Where's the best place to download the driver? I've looked at Intel's site but got confused! The laptop is not connected to the interweb currently so I will have to download any drivers to my PC, burn them and then install from disc.
Any help very greatly received.

A:Solved: Motherboard/Sound Driver? Tosh Sat Pro...

Look at the model under the laptop and then use this link.

2 more replies
Answer Match 57.12%

I have 2 Toshiba Satellite Pro 4600 laptops. One has a broken screen with a DVD ROM drive, the other works fine but only has CD-ROM.

I wish to swap the CD and DVD drives over and get rid of the non-working unit.

I have looked high and low for info on how to open up these laptops to swap the drives, but have drawn a blank. Toshiba states such info is in the user manual if the drives are removable but it is not in there.

What I need is either a full service manual or specific instructions on drive removal / replacement.

Any info gratefully received.


A:Solved: Two Tosh 4600's - how to swap CD/DVD drives?

7 more replies
Answer Match 56.7%


Toshiba L305D-S5929 I have no recovery disk..Many attempts at every startup prompts to repair repair runs restart same. Blue flash screen memory dump first currently at Choose Recovery tool command prompt No Toshiba option at that screen.

Thank You,

A:[SOLVED] Win 7 Tosh L305d Constant reboot repair

I am going to install Vista on disk partition 1 system reserve 100 mb wish me luck

3 more replies
Answer Match 55.02%

My older second reserve laptop - Toshiba Satellite A30-921, came with a 40gb hd and 512mb ram with Winxp (approx 5 years old)
Decided to try and get it back to life and give it a second chance, as in the past it kept rebooting every 10 minutes, and was so slow when it was working.
Used the product recovery disks for a fresh new start, removed one of the 256mb memory modules and replaced it with 1gb, so now up to 1.2 gb ram.Its even managed to install Windows SP3 without any hitches.
Only need to use it for email/ surfing at present, but would like to download stuff in the future.
Have installed Norton 360 as I have this on my other laptop with a 3 user licence.

Up to yet, no problems BUT, can you answer me this:


I have not installed any Office suite/word/works/excel etc, I have not downloaded any pictures, music,documents
Space being used for "Documents/shared docs"= 5mb (sample stuff)
Space used on currently installed programs (taken from control panel) = 312mb

Whats eating up all my space, and what kind of % of used space should determine whether to upgrade the hd in the future ?

A:Solved: wheres my gb's gone ??

12 more replies
Answer Match 54.18%

MyYahoo Home page has disappeared. I've re-signed in, I hit all the MyYahoo links, double checked that it was still set on my home page and still nothing, just a blank screen. No error, no nothing. All my other web pages are fine. Is this a yahoo problem? Any one else besides me having this problem?

A:Solved: Wheres My Yahoo?

There could be a server problem at Yahoo; you're not the only one with this problem.

3 more replies
Answer Match 53.34%

hi . i recently bought this new mother board by Asus, P5RD1-V. the problem is that when i try to install windows xp on my SATA HD, after the initial stage during which the setup copies all the drivers and then gives that option " to install windows XP press enter" plus one or two other options, when i press enter i get this massage that says " setup didnt find any hard drives installed on your system. check to see if any HD is installed .... " and then it goes on to say things like check your drive configuration or the drive health and things like that. all this when at the the bootup it does show the hard drive connected at SATA port 1. !! ? i run seagate diagnostic tool on it and it showes the drive as perfectly healthy. i dont know why is it doing it. the hard disk is spanking brand new. the same goes for the 120GB WD SATA. the interesting thing it has no issue with the good old IDE HD's. i connected my old maxtor IDE hard drive and the setup ran as smooth as it can get. i dont know why setup isent detecting the SATA HD. is it the board or is it somthing else. any ideas !

A:Solved: Dude wheres my Hard Drive !!

6 more replies
Answer Match 53.34%

win9x and Win2000 had a command called "show desktop" with an icon that would get you back to desktop from and application, where is this on XP Home?

A:Solved: wheres show desktop command in XP

Windows key + D will show the desktop.
For the icon, go to:
C:\Windows\System\Show Desktop
Drag to Quick Launch bar and copy there.

2 more replies
Answer Match 51.24%

I have a Compaq Presario desktop. Its from 98 (i think) and it has XP service pack 2. My dad unplugged it while it was on doing a Mal-ware scan. (ERRRRR) Now it's in a endless loop! It starts to load XP, then restarts, and does again, again, etc.!! PLEASE HELP!!! I don't have any backup discs... it's a good 10 years old and has a floppy drive (no backup floppy either), 512mb ram, 2.7ghz, 120gb Ultra DMA hard drive, also a CD-Rewritable drive, and lastly a DVD-ROM drive.

I only have pics on there, so COMPLETELY restarting IS AN OPTION. Buuuut I do not have any installation disc. (example, XP) If I do this, will I be able to get my XP back? Thank You very much!!

A:Solved: Please help me!! 1800$ computer broken

13 more replies
Answer Match 49.98%

Just installed the above running Win XP Pro. All works perfectly, apart from it only runs at 1150 MHz. I've figured out that I need to change the FSB speed to 133MHz, to take it to 1533MHz at 11.5 times, but I'm shagged if i can figure out how to do it. There's an option in the BIOS to change the CLK/PCI/Spread speed, which may be it, but when I change it to 133, the display fails and I have to reset back to 100.

Any ideas on where I'm going wrong???

A:[SOLVED] AMD XP 1800+ & Epox 8KTA3L+ runnig @ 1150MHz

6 more replies
Answer Match 49.98%


Just a little 30 secs question,

I wanna build my pc, and i've come up with
Gigabyte GA-880GM-UD2H

which is my mothrboard, gosh, big letters,
anyway, the motherboard supports
1800+ ram, does that mean i can put a 1333
ram in there and it will work?

thanks a lot folks


A:Solved: If motherboard supports 1800 will it support 1333 ram?

7 more replies
Answer Match 49.14%

cant find drivers for this pc...running xp... have been to toshiba site but cannot find base system device.. ethernet controller... usb controller and vidoe controller.... have tried what is on there site... but not working... any ideas... thanks

A:Solved: toshiba drivers for satelite a45-s150

Did you try here:
there are several pages......

3 more replies
Answer Match 49.14%

My screen on my laptop is dark and no matter what I have tried (resolutions type things), I can't get it lighter.

It is extremely difficult to see and I'm hoping someone might have a fix.


A:Solved: Screen Problem on Tosiba Satelite A35

11 more replies
Answer Match 49.14%

Good day Sirs,
I recently updated an ACER aspire 1800 BIOS (used the 1.17 update). The update was carried out from within Windows XP and after it completed the system was rebooted.
The system started with thick white vertical bars and black horizontal bars making it difficult to read or see what's on the screen properly.
From my search on the Net, it seems I should have used the 2.7 BIOS update instead.
Someone (spock028) managed to update his BIOS with the correct version despite not being able to see what's on the screen.

I have created the Phoenix Crises Recovery disk (using a 80GB USB HDD, I created a 4GB partition, set it active and used this partition). I renamed the BIOS file to BIOS.WPH.
I managed to enable the option F12 (select boot device)

Unfortunately, since after I press F12 during boot and the boot option screen comes up, I can't see the options because the screen is garbled, I find it difficult to boot from the USB HDD)
I also tried the auto-option (pressing Fn+Esx, Fn+B, Winkey+B) during boot but that didn't work.

I am assuming the USB HDD is on the list that pops up.
I have tried an external monitor and the display is garbled as well.

Please can someone kindly give me the exact set of keys to press after pressing F12 when the boot option screen comes up to select the option to boot from the USB HDD?)

I have included an autoexec.bat file on the HDD that should run the f... Read more

A:Solved: Acer Aspire 1800 screen garbled after BIOS update

7 more replies
Answer Match 48.72%

My windows 7 toshiba laptop has given me the follwing errors:

Check Cable Connections!
PXE-M0F: Exiting Intel PXE ROM
No bootable device -- Insert Boot Disk

Can anyone help me fix my ltop

A:help with tosh

Check to see if the hard drive is seen in the bios.

If not then....

Make sure the hard drive is firmly connected.

In the BIOS, look in the boot options and take the "other devices" or "other" out of the boot sequence. Also check to see if boot from LAN is enabled. If it is, disable it. PXE is a protocol that will enable you to boot from a network drive or server. When it says that it failed, it is because it could not find an OS on the network.

1 more replies
Answer Match 48.3%

I didnt know if this should be in the Network or Hardware forum, but i'll try posting here I have a Toshiba satelite C660-11H and since i need bluetooth i swapped the Realtek RTL8188CE wifi adapter for an Intel Centrion 1030. Now i have bluetooth working fine, but i can't get wifi working , drivers installed nicely but i cant switch it on/off using Fn F8, and the intel program that came with the drivers says "Hardware Radio switch is off" I tried swapping back for my old wifi card and then magically wifi shows up in the Fn "Flash Cards", with no drivers installed for that card or anything, but when i use the intel card i have no wifi among the "Flash Cards", the F8 slot for wifi on/off isnt there at all. Is there any way i can force the wifi switch on? i'll even hard wire past it if i have to the latest bios i found for the C660 is 1.8 and thats the one i have installed. Seems other toshibas had problems with the intel cards they were delivered with and that issue was fixed with a bios update to 2.x, I am also curious to know how it detects a wifi card, since the wifi switch appears again if i swap back for my old one, I've noticed the intel card has less pins on the mini pci-e connector. Maybe i could bridge something to trick it?

A:Solved: Toshiba Satelite Wifi support issue.

I moved your thread from Networking to Hardware. All I know about installing a different integrated wireless adapter into a laptop is that often it won't even boot with the "foreign" hardware, sometimes works OK, and may give mixed results (as you are getting).

2 more replies
Answer Match 48.3%

Got a Philips 880 DVD+rw (works great so far!) the DVD recorded (on a rewritable disc) plays great on my PC but not on my laptop (Toshiba Satellite)....Windows wont recognise the disc or says it is not formatted. I have heard that they will not play on some but is there any way around this and to make the disc play? is it a software problem or hardware problem?

A:DVD+RW not playing on Tosh

Are you sure your laptop has a dvd drive? and if so, is the DVD decoder there...when i upgraded the OS of my sony laptop, i lost the ability to play DVDS as decoder was erased..i ended up needing to use a thirdparty dvd decoder software, such as windvd4 to play

2 more replies
Answer Match 48.3%

I bought a Toshiba HD (HDDR320E03X) a while back and lost the cable, i finally got around to picking a new one up, but my hard drive wont boot, the power light turns on, but the drive doesn't spin and doesn't show up in my computer.

the cable i bought is a Gigaware USB-A male to mini USB-B male, USB 2.0... as far as i can tell the cable should work.

Does tosh drives need tosh cables or is there something wrong with my hard drive?

A:Tosh HD not working

Toshiba hard drives are among the most reliable of all laptop drives... famous for it...
But it appears you are using an external enclosure, and enclosures are significantly less reliable...
One way to get closer is to reformat the hard drive in the computer, then look for red, yellow, or black flags in the Device manager after reformattting.

3 more replies
Answer Match 47.46%

Hi all

help for a numpty please.

i recently had a problem with the sound on my Toshiba Sattelite where any sounds stutter.

i found a resolution on another forum, but cant remember which one and have searched high and low.

i was told the problem was to do with an incorrect shutdown and a sound conflict, and was told to disabled something (cant for the life of me remember what though!) and all was good again.

Please cam anyone help?

running XP sp3

Many Thanks

More replies
Answer Match 47.46%

Hello peeps. I have a satellite L300D toshiba notebook which came with
vista loaded (excuse me while I use my sick bag). I've never known so
many problems with an operating system and so wiped off the hard drive
and installed XP pro sp3. This is where the nightmare began. XP just
wouldn't install, it kept giving me the blue wall of death before even
asking if I agree to the licence agreement. Being as daft as a brush I
went into the bios and changed the hard drive interface to be compatability mode and VOILA it installed XP. Phew that was a long story but now to the

It obviously uses a SATA Drive in this laptop and it just doesn't seem to be
offering data as quickly as Vista did. I can't remember the other bios option
which was on offer for the hard drive, ahci or something mental but this other
option worked in Vista. Am I losing any kind of performance using compatability mode? If so is there anything I can do about it because
Tosh don't seem to have anything on their download sites.

Many thanks for your time in reading my biography.

A:hey tosh gotta toshiba

You shouldn't be able to tell much if any difference between using AHCI and not using it.

2 more replies
Answer Match 47.46%

<p>Hi could somebody please help i have two laptops one old (windows xp) and 2nd tosh (windows 7) now i have forgotton my password and the laptop 2 </p>
<p>so i have been told is dead but he said i should be able to get everything off it and still have full access with all fav sites and i cant access cd or hardrive as i cant turn laptop on. please help me!!!!!</p> Also forgot to say both on a prepaid boardband sticks if that makes a difference

A:Hi could somebody please help i have two laptops one old (windows xp) and 2nd tosh (w

Please see the TSG Rules.

Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed., we no longer provide any help with lost passwords or getting around password protection. Obviously, we can't determine the real intent here, so our policy is to abstain from any assistance in these matters.Click to expand...

1 more replies
Answer Match 47.46%

I have a D-Link Modem Router DSL G604T. I have two desktops working fine. I have brought my old Tosh Sat pro out from storage that also works with it fine. But.......only as long as I use one of the two usb flash drive style D-Link adaptors. So that 3 computers only 2 adaptors. Problem.

When I had my previous wireless router I swear that the notebook used to work off an internal Network card just fine. But now without the specialized Dilink USB plugin adaptor no internet.

Its been a long time since i had to fiddle with this stuff.

And I'm using XP.

What can I try in the Tosh notebook to see if the network card internal can pick up the Dlink router/modem? Or will i need a third USB flash router adaptor?

A:ToSH Satellite Pro & D-Link

6 more replies
Answer Match 47.46%

My daughter's Toshiba TE2000 will not turn on. When plugged in, the power LED is lit, the battery LED is lit, but when she pushes the power button, the Slim Select Bay indicator LED flashes for a second, then nothing happens. (BTW, the "Slim SelectBay" is currently occupied by the CD/DVD drive). I have tried turning it on w/o the battery, with the WinXP cd in the CD/DVD drive, with the HDD out and the WinXP cd in the drive, and it always does the same thing. Clearly power is getting to the computer, but something is blocking the power to start the boot process. Does she need a new power switch? New internal power regulator? New HDD? New computer? Would appreciate any help.

More replies
Answer Match 47.04%

Wondering if I can take the HDD from my Acer 5536 and slot it straight into my Toshiba L300 laptop, OS and all. Will it run? Driver issues? If so couldn't I just update all drivers?

Btw, the OS is Vista HP not Windows 7. I couldn't find Vista in the Microsoft section of the forums. It just seems to jump from XP to Windows 7, completely missing out Vista all together. Not sure why this is?

A:Switching HDD from Acer to Tosh machine?


No you can't take hard drive from one computer and put in another as it will have different hardware. You would have to reinstall the OS.

4 more replies
Answer Match 46.62%

Hey folks.

So I am looking for second and third opinions on what may be wrong with my
old Toshiba Satellite A2OO. The problem that I have is that when I plug in the PSU with the battery in the machine wants to shut down and restart.

I have just received shipment of a new compatible battery from Hong Kong believing the old battery to be the problem. The battery is definitely compatible and yet the problem persists. In fact the computer works fine on the new battery. I can connect the PSU while the machine is not powered up and the battery will charge to full, however if the machine IS powered on battery and then the PSU connected, the battery charge indicator shows that it is charging but then stops and the machine shuts down and restarts soon after (this happens in a loop).

I have tried the following:

1) Run the laptop only on battery (machine works fine)
2) Plugged in PSU while machine is running on battery (shutdown occurs)
3) Plugged in PSU with battery in before boot (shutdown and restart occurs)
4) Charged battery using PSU with machine powered down (successful battery charge)
5) Removed battery and powered on the machine with PSU ONLY (causes shutdowns and restarts)
6) Changed all power plan settings to the same for power as the battery (saw that this worked for someone elsewhere but no change for myself) and tried resetting all plans to default settings
7) Checked that I have the latest BIOS (affirmative)

This has been a well documented issue for ... Read more

A:Tosh A2OO reboots when both battery and PSU plugged in

Not sure I can really add anything useful, but... Does the power supply have an LED light on it and if so, does it go out when you connect the PS while the battery is installed? Can you boot to a Memtest cd while the battery & PS are both connected to the laptop?

9 more replies
Answer Match 46.62%

Hi, i have lots of apple related programs on a toshiba laptop. I own no apple products so are these programs necessary or are they just taking up space?

A:I have lots of Apple programs- do I need on a tosh laptop?

what apple programs do you have? is this a brand new laptop? did they come pre-programed?

7 more replies
Answer Match 46.2%

Just registered, First Time User.

I just bought Tosh A105-S1014 on E-Bay. I can't do anything without the System Password.
This new type doesn't use a dongle on the printer port. (No Port) Toshiba Support says I have to take it to a repair center. For the past couple of years I've been rebuilding tosh laptops, for fun, giving them to Grandkids, etc. Wouldn'nt mind disassembling, if that's what it takes. Needs a new LCD anyway, but that doesn't require bottom case disassembly. Any help would be appreciated.



A:System Password Reset Tosh A105-S1014

I feel your pain, been there before. I'd try to contact the eBay seller for help. But unfortunately our rules prohibit assistance in areas of password assistance due to us not being able to verify your identity with 100% certainty. So I must close this per our rules:

Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed.
Click to expand...

1 more replies
Answer Match 46.2%

Right you lot. I'm trying to install either a Creative Webcam Pro Plus (or a Fujifilm FX2800 in webcam mode - whichever gets there first!), on a Satellite Pro 4600 (Older model - Celeron 700, 64M, 13.3 TFT, CD ROM with Windows 2k which is at Service Pack 4)

In either case, the latest driver software has been installed. On power up, the machine recognises that the camera has been connected and starts to install the driver. It seems almost to complete the installation, but at the last moment, the Windows 2000 blue system crash screen appears. I can just see that it is reporting a memory dump but as the machine almost instantly starts to reboot, I cannot tell you what it says beyond that.

On reboot, Win2k does a disk check and usually finds several file fragments.

The only advice I have found so far has been from the Creative help pages, which say that USB legacy mode should be enabled (It is) and that "Assign interrupt to USB" should also be enabled (Can't find that function in BIOS setup).

Before I investigate the potential of a lump hammer as a programming tool, or updating the BIOS - any ideas?

A:Driver Probs: Webcan under Win 2000 on Tosh Sat Pro Laptop

Right click on My Computer. Selct properties/Advanced/Start up recovery/ and untick autmatically reboot. That will let you see the error.

1 more replies
Answer Match 44.52%

Hi all
Not sure if this is the right forum for this ?. But In my "pictures" folders i use to see the pics now i just see icons. I changed the default program back to Windows Photo Gallery from Picaso to no avail.
Thanks for any help Jim

A:Wheres the Pic?

Hi pofolks4,

Can you attach the screenshoot?

Run Disk Cleanup tool and clear the Thumbnails (Attached Screen shot).

Click Start > Type: "folder options" and open > Go to view Tab > uncheck "always show icons, never thumbnails" under Files and Folders (Attached Screen shot).


3 more replies
Answer Match 44.52%

I have just added another stick of ram I have 4 x 256. This shows up in system information as
Total physical memory =1,024mb
but then it says
available physical memory= 576.14.mb

Is my graphics card stealing it its a radeon 9200se

Its got me all coffuzled

and my motherboard is a Giga-Byte GA-8ISXT-FS Motherboard

A:Wheres me ram gone


3 more replies
Answer Match 44.52%

Ok I took the plunge and upgraded to IE7. HATE IT! where is the OE link on my toolbar or task bar or whatever that is? Now I am forced to go to my desktop to access OE whereas with IE6 there was the little envelop icon up top there that was my OE link. If I dont get a clear answer on this I am just going back to IE no matter what the risk as far as critical updates I just cannot STAND IE7 .For me IE6 was simple it was a clean look and simple use this IE7 is stupid, makes no sense it was just done to compete and from what I have heard from bigger geeks than I is, Microssoft is years late and about a million dollars too short (to corrupt the old cliche) with IE7,ok This is just IMHO but its how I feel abouti t. So can someone help me I even tried to see if I could put OE as a favorites but cannot do THAT either. save IE7's life on my puter (if u care, about IE7 cos I don't) I just want to return to the times of old and easier. thanks y'all bad

A:so wheres OE on IE7?

8 more replies
Answer Match 44.52%

Hi guys!
A few weeks ago I got the RC1 dvd. Then I heard RC2 was released. But I never recieved an email from Microsoft and when I go to their site it says "RC1". Does anybody know where RC2 is? I can download it if I need to 'cause I have a high-speed internet connection and a DVD burner.
Thanks Alot!

A:Wheres RC2?

12 more replies
Answer Match 44.1%

hey, hope everyone had a nice christmas!, but i have a problem, i just popped a game into my cd drive, waited for it to auto run, and as it didnt i looked under "my computer" and say that i no longer have a cd/dvd drive?? i went through device manager and see the error "Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)" anyone got any ideas?

tia for any help.

A:wheres my cd drive?

If you have recently popped in some new software try using system restore to get back previous settings and see if the cdrom "re-appears".

1 more replies
Answer Match 44.1%

I accidently deleted my recycle bin I tried searching for it but it didnt come up any suggestions.

A:Wheres the recycle bin?

7 more replies
Answer Match 44.1%

Im running Outlook 2002 on 5 different computers via a server running Microsoft Exchange Network. When I assigned delegate acces to four of them, there was no fight. However, one of them will not let me assign delegate access no matter what I do. I have tried using the add-in manager to set up the delegate option, but it doesnt do anything. I cannot see the delegates tab in options, nor can I see it in the inbox options. I am trying to assign delegate access for read access to the inbox, and read,edit,modify access to the calendar. Anyone have any bright ideas? Cause im tapped out. Thanks

A:Wheres the Delegates?

If you right-click the inbox (or calendar) and go to Properties, do you see a Permissions tab? You should be able to grant permissions from there. It works much the same as the delegates tab, but when you grant people permissions in delegates, it also gives them the ability to "send on behalf of" the user, which may or may not be what you want. Let us know whether the permissions tab is visible and whether that's helpful, or not what you're looking for.

2 more replies
Answer Match 44.1%

I built this new computer.

AMD Phenom II X2 555
Asus M4A78LT-M LE Mobo

Heres the problem. I used the SSD as the boot drive, but I cant find the 250GB HD. I hooked up the storage via this: SSD-sata 1, Seagate-sata 2, front panal sata jumper-sata 3.
Windows 7 doesnt show the 250GB drive since I chose the SSD as the boot drive upon installing windows 7. So, what do I do?

Thx for any help, CJ

A:Wheres my other HardDrive?

Open your Start Menu, right-click Computer and select 'Manage'. Left-click 'Disk Management', find your Seagate drive, then assign it a letter and Format it. Then it should be recognized by Windows 7.

4 more replies
Answer Match 44.1%

mi amigo told me to sign in here, and ask for help, but, not quite sure what i'm supposed to ask, other than my computer is jacked

A:wheres 50? trying to fix my puter.....

8 more replies
Answer Match 44.1%

I lost my walllpaper to a hijack i quess quite awhile ago. I got everything working but my wallpaper. What do I do ?

A:Wheres my wallpaper

6 more replies
Answer Match 44.1%

okay so my computer has 2gig of ram but keeps only going too 1.6 gigs when i open alot of memory hogging applications and then it'll start slowing down but my ram stay at 1.6 (and its set too high performance in the power options to)

A:Wheres my memory gone?

I would consider adding RAM.

32 more replies
Answer Match 44.1%

hey guys umm i need help i have a spyware problem can some one help me analyze whats wrong? here is my HJT log thanksLogfile of HijackThis v1.99.1Scan saved at 3:45:25 PM, on 7/14/2005Platform: Windows XP SP1 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\csrss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\System32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svchost.exec:\Program Files\Common Files\Symantec Shared\ccSetMgr.exec:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\ehome\ehtray.exeC:\windows\system\hpsysdrv.exeC:\Program Files\HP\Digital Imaging\Unload\hpqcmon.exeC:\WINDOWS\System32\hphmon05.exeC:\HP\KBD\KBD.EXEC:\Program Files\Common Files\Symantec Shared\ccApp.exeC:\WINDOWS\LTMSG.exeC:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exeC:\Program Files\Multimedia Card Reader\shwicon2k.exeC:\Progr... Read more

A:wheres the spyware?

Welcome,Please follow the instructions provided, you may want to print out these instructions and use them as a reference.First:Please download ewido security suite it is a trial version of the program.Install ewido security suiteWhen installing, under "Additional Options" uncheck "Install background guard" and "Install scan via context menu".Launch ewido, there should be an icon on your desktop double-click it.The program will now go to the main screenYou will need to update ewido to the latest definition files.On the left hand side of the main screen click updateThen click on Start UpdateThe update will start and a progress bar will show the updates being installed.If you are having problems with the updater, you can use this link to manually update ewido. the updates are installed close the Ewido program.Reboot your computer into Safe ModeOnce in safe mode, start Ewido and do the following:Click on scannerClick on Complete System Scan and the scan will begin.While the scan is in progress you will be prompted to clean files, click OKWhen it asks if you want to clean the first file, put a check in the lower left corner of the box that says "Perform action on all infections" then choose clean and click OK.Once the scan has completed, there will be a button located on the bottom of the screen named Save reportClick Save report.Save the report.txt file to your desktop.Now close ewido security s... Read more

1 more replies
Answer Match 44.1%

hello all;
heres a good one for the gurus.
i am running an hp compaq dc5850 sff. i have two hdd. one with all my America's Army stuff on it. on one i have the deploy client and game but nothing else that pertains to AA2.
so i decide to start to set up AA2 on the vista hdd as it is on xp hdd, the first thing i do is go to my maps website of choice and start to download the user created maps i like. everything looks good, i choose the correct directory and file and even hit the open folder button to make sure the map is in the right place and it is.
now the good part, i close everything up and go back to the map to make sure it will start and play correctly and it is not there, i search for it from the search window at start and search tells me the closet it could find was the same map but on the E drive, which is where the xp hdd is when i boot vista.
any ideas?

More replies
Answer Match 44.1%

after installing a program i got from a site i tried to restart my computer and now every time i restart it doesnt go to the desktop its just completely black with one window of the computer documents open. i try going to task manager and then new task and explorer and it somehow opens the desktop. Everything else seems to work after i get to the desktop...this is a brand new 5 mon vaio vista laptop....why is this happening??? please help me im freaking out and dont know how to fix anything!!!! step by step help would mean a lot guys. Thanks

did i screw myself here? did i damage my computer forever??? it didnt even come with a vista cd! and i dont know what to do

A:Wheres my Desktop? HELP plz!

duplicate to, closing thread. Please do not create duplicate threads, as then we will have multiple people trying the same fixes, and no idea that it's being attempted in another thread.

And welcome to TSG.



1 more replies
Answer Match 44.1%

ok i just installed xp pro and i was loading all of the drivers and everythin. But i seem to come to a problem all of my disk drives are missing and the only thing that seems to work is the hard drive itself. any one else have this problem? is there a quick fix or am i hosed?

A:What wheres the drives?

They need to be allocated to XP.

Start > right click My Computer > select Manage > select Disk Management

They sould show up there. Right click the drives and choose from the menu.

3 more replies
Answer Match 44.1%

moved to the video and sound section

More replies
Answer Match 43.68%

Well I am starting to teach myself C++ and would appreciate and suggestions on a good free (if there is a good free one)compiler. I am operating under WinMe. Thanks in advance.

A:Wheres a good compiler

Have a read of this:

Good Luck!


3 more replies
Answer Match 43.68%

trying to set up a mixed network cant find netbeui when I try to add a protocol to my connection

A:Wheres the netbeui protocol in xp ??

6 more replies
Answer Match 43.68%

can someone help? I just ran restore from a backup on an external harddrive, it took over 5 hrs, then finished. But where is all my 'restored' data?? I cant find it....

if this is too vague tell me and i will try to explain further but its pretty straight forward....

is there something more i must do?

A:wheres my restored data?

If the restore ran properly, the restored files and folders should be in the same places they were when you did the backup. It sounds like either there was a problem with the backup or there is a problem with the restore. Let's make sure you're doing things correctly before assuming there is some problem with the system or the hardware or the backup file - which we will address later if this doesn't help. The following should help:

Here's an article on the restore procedure: just to make sure you're doing it right. It's a selective restore of a full or selective backup (not a complete restore of a complete backup) - but since you did a full backup it matches your process closer than a complete restore would.

Here's another excellent tutorial on the Restore process: Restore Backup Files.

Here's an article on how to use Advanced Restore (when normal restore doesn't work):

Restore files from a backup

Back up and restore: frequently asked questions

I hope this helps.

Good luck!

2 more replies
Answer Match 43.68%

I just bought this baby and looked at the help page in the login setup and it said "Advanced Setup | Firewall | DMZ "
I dont have that option...
In my Firewall section all i have is enable and disable and it has been disabled already.....There is no DMZ menu or anything anywhere. And also installing the latest firmware from the site doesnt work either it keeps giving me "wrong image file" or something when i browse for the dlf file....This is weird!!!!
Anyway most important id like to figure out how to DMZ this computer. Any help with that would be greatly appreciated.
Thank you,

A:Wheres the DMZ option in 7008ABR?

itds under settings under MISC.

1 more replies
Answer Match 43.68%

ok i have a 75gb HD and about 35gb of it is unaccountable, used space but no reason to be, iv checked all the folders on the C: and i cant find this mass of used space, i cant think where it is or what it could be, old files, stuff that didnt delete properly etc...

any ideas would be really helpful thanks

A:wheres my HD space dissapearing to?

Use explorer. Search on *.* with subfolders. Then sort on largest size and see where your largest files are.

Have you looked at your restore point settings?

11 more replies
Answer Match 43.68%

Hello everyone, i done a system recovery on my laptop and now i cant change my screen brightness, adjust the resolution or connect to tv with hdmi anymore :-(

Before i done recovery i noted that my graphics card was an Intel HD graphics family but now it shows as a 'standard vga graphics adapter'

How can i find / install or whatever to get my laptop to use the Intel HD graphics family card that is inside my laptop ??

I have been on the intel website and done an hour trying all sorts of downloads but nothing works, can anyone help, i am using windows home premium 64 bit and laptop is samsung

thanks guys

A:arrgh wheres my drivers gone? :-(

model laptop?????

1 more replies
Answer Match 43.68%

For some reasons i cant see my data partition on My Computer and when i go on manage i see it but it have no name and no letter and i cant change anything on it.

Anyone have a clue?

Thats what i see:

What i see when i try to fix it:

A:Wheres my DATA partition?

Hi revaN and welcome to the forum!

Please follow the steps outlined in this tutorial - Hard Disk Partition Letter Missing in Windows 7 - Fix

If you still encounter the same errors, please try to download and use TestDisk, here

Be sure to read the software documentation carefully before proceeding with running the software.

Alternatively, please try booting off of your Vista partition and do a check disk on the drive in question. Check to see if the issue is still present when you boot back to Windows 7 then try the suggested steps above.

Let us know how it turns out

3 more replies
Answer Match 43.68%

I have a Compaq Presario CQ57 and when I try to connect to the internet it tells me that there is no network adapter, can someone help me PLEASE?

A:wheres my networking hardware

Go to Start/Search type devmgmt.msc, Right click the devmgmt results and Run As Administrator. In the Elevated Device Manager, are there any devices with Yellow Flags? Especially under Network Adapters?
Turn the laptop over and read the Full model number (eg) Compaq Presairo CQ57-xxxx.
On an internet computer, go to the HP Support/Software and Drivers tab HP Customer Support | HP? Customer Support and type in your make and model # or choose it from the list. Choose your version of Windows 7 (eg) 32bit or 64bit Under Driver-Network download your Network Adapter driver, and any other device drivers with yellow flags in the Device Manager. if on another computer, Save them to a USB Flash Drive and install it on the troubled computer.

2 more replies
Answer Match 43.68%

Good evening. I have an odd one. Lately I'm noticing my primary drive runing low on space. I only use it for my operating system and shortcuts. Allot of space seemed to disapear and I'v been getting disk cleanup popping up. I dug around and found the problem.
I have a folder called "D:\X\USMT2.UNC"
I'v never noticed it before, and hte dat files in the folder are over 10 gigs in
'ANyone want to throw in a word before I delete these. Screenshot.

A:Wheres my drive space going?

Well that folder saves the file(s) used for windows' files and settings transfer wizard. Why you have that many and that huge >> ???

Maybe you should check with your "wizard" and see what he says... ;-)

3 more replies
Answer Match 43.68%

I just did a detect and repair in office xp 2002 and now all my e-mails are gone

When I opened my e-mail account I had to reset the acount settings and when I did there were no e-mails from before There was a pop up that said i could import them back but I could't figure it out

Are they gone
Can someone help


A:[Resolved]Wheres my E-mails

If anyone interested i fixed this by searching for .pst files(outlook files are kept in these file types) then imported the contents of the old outlook file(it was still there) to the new one and got all my e mails and contacts back

2 more replies
Answer Match 43.26%

Hi Everyone

Im trying to find a bottleneck in my system, im trying to run Everquest 2 and it runs fine in "high performance" mode but as soon as i try and get some extra graphics it starts to give me serious lag.. im trying to identify the problem can someone please tell me where my bottleneck is ??

my computer consists of.

MB: Epox 8RGA+ Motherbaord with Nforce2

RAM: 2x 256mb TWIN X Corsair (333mhz)

CPU: Athlon XP 2500+ Barton Core (333mhz)

Graphics Card: Geforce 6800 (Winfast A400)

POWER: 350w Power Supply

HDD: Western Digial 80gig 7200rpm
I only purchased the video card recently and they are supposed to be extreemly quick, so im just wondering if there is an easy answer to improving speed or maybe i need to look at upgrading a few things... ?

And also another question if anyone knows, does adding another stick of 333mhz RAM to the third slot will that slow down my DUAL RAM which is now active in my PC ?

A:EXPERTS ADVICE ! Wheres my bottleneck ?

15 more replies
Answer Match 43.26%


I was browsing through using FireFox - had a couple of tabs open - one or 2 tabs related to localhost.
When I switched tabs and clicked on a browse link in one tab (one with phpMyAdmin loaded, to browse through the rows), I got the blue screen.

Memory got dumped as usual. Told to CHKDSK /F to check for drive errors etc.
I dont get this often. Probably thrice in the last 3 yrs - and the first 2 were hardware related I think.

After a restart, I got the Technical Error Report and that something created at

But both these dont exist.

How can I know what went wrong and where ?


A:Wheres the dump data and what went wrong ?

Have you checked for disk errors?

16 more replies
Answer Match 43.26%

Before I tinkered with my computer it had an option of 2 startups. A mirror disk and normal startmode. I deleted one (long story). Computer starts into windows without any options My 180 gb hard drive now has 8. I have checked bios and am 2 be honest a little confused. Anyone able 2 help

A:O dear, wheres my hard drive gone

What kind of os are you running??


1 more replies
Answer Match 43.26%

I have a toshiba laptop with Windows XP and SP2.

I have noticed that the icon that comes up when i put a piece of hardware in my usb no longer appears, i have nothing to click on to safely remove any hardware.
I normally use it for a mouse dongle, when i read up on another thread it says to look in my computer and click on the hardware and make some changes to it,however not being a storage device its not there.

I have tried to use system restore to an earlier date but cannot go back further that 30 march (not far enough) even though there are lots of checkpoints.

can anyone help please?


A:wheres my safely remove icon gone

16 more replies
Answer Match 43.26%

I installed it and i had in the address book users that are not in my contact list anymore, but my message history with them could be found in the address book, but I can't find the address book in icq2000b

i had icq99 before,


A:wheres is the Address Book in ICQ2000b???


What are the contents of your ICQ folder, in Windows Explorer?

Do you have any .dat files in there?

You may also want to take a look at this:

It also says you may need the Message Archive plugin from here:

This will create a txt file, of which you should be able to view all you want.



3 more replies
Answer Match 43.26%

Hi. i am running windows xp pro sp2. my windows task manager has suddnely gone bonkers. all the tabs+drop down menus are gone. when i press clt+alt+delete all i get is the view which shows the proformence graph. this is how it appears now
it has happened to me once before too. dont know wht caused it. any ideas how i could get ma whole task manager back !! ?

A:Dude.. wheres my Task Manager !

8 more replies
Answer Match 43.26%


I've just formatted my g/f's pc which is running Windows XP Home Edition. I was setting up Outlook Express, Tools>Options>Spelling the only language in the drop down menu is French. French is no good to me when I'm writing an email in English lol. How do I resolve this problem and find the other languages?? Any advice is much appreciated.


A:Outlook Express, Wheres English??

English here.

You may have to reinstall the program with the English language pack.
Go here:

By the way, your spelling is pretty good. Maybe you need to learn French.
-Andy (English)

3 more replies
Answer Match 43.26%

I typed "tablet wallpaper" into google images. It says

"About 25,800,000 results"

I keep clicking "Show more results" until I get to "page" 50 and it ends with a picture that says "I heart ipad".

Then thats it. No button to load more results. Google said 25,800,000 results. That certainly wasn't 25,800,000 results.

A:Wheres the REST of googles results ?

I did a search using your exact phrase and my results were: About 47,100,000 results (0.15 seconds)A quick google search for a definition of those results netted: Statistics Bar: Describes your search, includes the number of results on the current results page and an estimate of the total number of results, as well as the time your search took. For the sake of efficiency, Google estimates the number of results; it would take considerably longer to compute the exact number. This estimate is unreliable.Bold is mine.From the preceding I extrapolate that the guesstimation number is a product of Google's algorithm for every possibility of those two words and how they would be used as well as them being used combined. As well as possibly wall and paper individually . To get every single one of those guesstimated results you would likely need to refine your search parameters repeatedly. For example Samsung 'tablet wallpaper' then ipad 'tablet wallpaper' so on and so on. Not to mention probably include every known language as well. This is my theory.Also there was this bit of information about search results:Ordered by relevance to your query, with the result that Google considers the most relevant listed first. Consequently you are likely to find what you're seeking quickly by looking at the results in the order in which they appear. Google assesses relevance by considering over a hundred factors, including how many other pages link to the page, the positions... Read more

2 more replies
Answer Match 42.42%

Greetings and thanks for any help here...
Back story...Last week I bought a new computer running Windows 7 Pro,
Before my new computer arrived I installed Microsofts Easy Transfer program on my old XP computer , ran the program and sucsessfully transfered my files on to a new blank CDRW disc.
Today I fired up the new computer for the first time, ran the Easy Transfer program , pointed to the CDRW disc and the program formated as expected.
when the program was completed and files were apparently transfered and the programs status window closed. and that was it, nothing more.....
I unhid my system files and and searched everywhere with no resolve (sighs..) would one of you fine folks please help me locate my transfered files as the are very important to me.
Thank you again.. I'll check back often

A:Used Windows Easy Transfer but now wheres my files?

In the start menu go to Accessories -> System Tools -> Windows Easy Transfer Reports and open it up.  The Transfer Report will show what has been transferred.  If you click Documents it should show you exactly where it's placed your document files and what they were.

6 more replies
Answer Match 42.42%

er BTW, I was TRYING to help this guy with the Trojan problem and what I told him about his HijackThis log I copied from Ozrom1e who seems to know what he is talking about. So where is YOUR gold or blue shield then? Im sure I would rather people TRY and help me than not try at all.

A:redoak, wheres YOUR gold or blue shield then???

Hi The shields are probably getting ready for Thanksgiving like cooking the big bird and getting the house ready for all of the TSG family to munch on the goodies. Please be patient and I am sure when they arrive they will be there.

And thanks for the compliment it is appreciated.

Have a Happy THanksgiving.

3 more replies
Answer Match 42.42%

In this picture, you can see a settings button for the Loudness Equalization enhancement. When I go to the enhancement tab, there is no settings option (or "Preview" or "Restore Defaults"). Why is this? I wanted to see what the "Release time" option does, and I can't get to it.

Also, while I'm here, I was wondering if there was a way I could "tweak" loudness equalization. I want to make low/quiet sounds louder, but I don't want to reduce the volume of louder sounds. Is this possible? I've been googling for ~2hrs and I came across the Release time setting, and I was gonna mess with it, but it's missing.


A:Loudness Equalization - Wheres the settings button??

No settings available... unfortunately!

It looks like MS has licensed some of the "Waves" DSP technology, pretty high end software... part of the L-series Maximizer. It's a combination Limiter/Compressor and I think they figured the general public wouldn't know how to set it up. Too bad, it could use a litttle tweaking, the attack is a little slow.


4 more replies
Answer Match 42.42%

I bought my Dell 4700 about 6 months ago and was just going through the discs that came with it. I remembered that the Dell did not come with a Windows XP install disc in case I need to re-format. Is this normal? There is an option under Start....Accessories....System Tools to create OS backup disc. Is that what I need to make a disc or should it have came with one? Thanks

A:Um... wheres the XP install disc with Dell 4700?

8 more replies
Answer Match 42%

i can't find a legitimate untouched unmodified iso of vista home 64
all the ones i find are messed with in some way or another either with added updates or a crack or something
can someone show me a legitimate link to a legitimate iso of windows vista home premium 64? thanks!

A:Wheres a link to an iso of windows vista home premium 64?


Look here for a start: -


7 more replies
Answer Match 42%

hi, can anyone pls tell me what is better, the P4 or and ADM 1800, i have been told by tiny PC that ADM is near to or better than a P4, is this true??

Ben U.K

A:ADM 1800 or P4

10 more replies
Answer Match 42%

I have an old PC with a AMD AthlonXP 1800 CPU. 15mhz.
However every so often resets it self to 11.5 mhz. I have to go into the CPU setup area and change the settings. Anyone any ideas why???

A:AMD 1800 xp cpu

8 more replies
Answer Match 42%

hi, i just bought a pc and it had no graphics card, went out n bought a ati 1800 xt, anyway can anyone pls tell me what type of connector i need for the power to it pls? do i need a 4 to 6 pin power connector? cos when i put the graphics card in i get loud beeps and it says PCIE HIGH-END GRAPHICS POWER NOT CONNECTED, thank you

A:ati 1800 xt

right i got it working anyway, only thing is that after its detected it it says on my system that its a radeon x800 xt but i was meant to have a x1800 xt, which of these is the best please?? thank you

3 more replies
Answer Match 41.16%

Have a strange problem with all PC's on my home network
The bt 1800 router is set set to allow all access but it blocks up load file transfer using
cute FTP and wont allow log on to Live messenger
FTF downloads to pc's and old Messenger are OK.
Any ideas.
My first input , like to also say hello.

More replies
Answer Match 41.16%

Does anybody know what the XP 1800 cpu frequency should be set at?

A:XP 1800 cpu frequency

9 more replies
Answer Match 41.16%

I have a athlon xp 1800 on a soyo k7ada v 1.0 motherboard.The cpu is only running at 1.1 not at the 1.5 that it should be any suggestions. Thanks

A:athlon xp 1800

6 more replies
Answer Match 41.16%

I still cannot install the WinTV app on XP Pro 64bit. The drivers install fine, but the WinTV application will not install. It pauses for a moment, after I click on the Install WinTV link, and then pops up a small box indicating that the Install is Complete.

Nothing but the drivers have been installed and I never get the list of Components with CheckBoxes to the Left, like I should see.

Is there a problem with this card and XP-Pro 64bit?

A:WinTV-HVR-1800 PCI-e

Try updating the driver from the web site.

3 more replies
Answer Match 41.16%

could someone tell me what the difference between the model 6 and model 8 cpu's, only I have noticed that AMD
state either both or single model can only be used on their
recommended motherboard list

A:AMD 1800 xp model 6 / 8

If you are into reading here is a link to AMD's site with technical data on both models,,,30_182_739_3748,00.html

2 more replies
Answer Match 41.16%

Hey guys, not sure if this is the right section or not. Apologies if it isn't. Anywho, I just bought a Hauppauge 1800 tuner card, got it installed without a problem in Vista Ultimate x64. Now the problem is WMC says that I have no tuner hardware installed when I try to set it up. I have downloaded the latest beta drivers from Hauppauge's website to no avail. I contacted their support, and I have yet to hear back in 3 days. If anyone can point me in the right direction, it would be much appreciated.

More replies
Answer Match 41.16%

plz help me ! I need to over clock my amd 1800 with 512 ram..
I dont know what specific details you need still according to my knowledge i am displaying some below...

CPU Properties

CPU Type AMD Athlon 64, 1800 MHz (9 x 200)
CPU Alias ClawHammer-512
CPU Stepping CG
L1 Code Cache 64 KB
L1 Data Cache 64 KB
L2 Cache 512 KB (On-Die, Full-Speed)

CPUID Properties

CPUID Manufacturer AuthenticAMD
CPUID CPU Name AMD Athlon(tm) 64 Processor 2800+
CPUID Revision 0F4Ah
Extended CPUID Revision 0F4Ah
Platform ID CCh (Socket 754)

Motherboard Properties
Motherboard ID 07/29/2005-K8M800-8237-6A7L1M4FC-00
Motherboard Name Unknown

Front Side Bus Properties
Bus Type AMD Hammer
Real Clock 200 MHz
Effective Clock 200 MHz

Memory Bus Properties
Bus Width 64-bit
Real Clock 200 MHz (DDR)
Effective Clock 400 MHz
Bandwidth 3200 MB/s

Chipset Bus Properties
Bus Type VIA V-Link
Bus Width 16-bit
Real Clock 67 MHz (ODR)
Effective Clock 533 MHz
Bandwidth 1067 MB/s

Motherboard Properties
Motherboard ID 07/29/2005-K8M800-8237-6A7L1M4FC-00
Motherboard Name Unknown

Front Side Bus Properties
Bus Type AMD Hammer
Real Clock 200 MHz
Effective Clock 200 MHz

Memory Bus Properties
Bus Width 64-bit
Real Clock 200 MHz (DDR)
Effective Clock 400 MHz
Bandwidth 3200 MB/s

Chipset Bus Properties
Bus Type VIA V-Link
Bus Width 16-bit
Real Clock 67 MHz (ODR)
Effective Clock 533 MHz
Bandwidth 1067... Read more

A:Overclocking AMD 64, 1800?

If this is a name brand computer you can't overclock it. The manufacture locks the o'clocking out of the bios.
If your really need to overclock you can try clockgen or a software overclock but i wouldn't recommend it.

1 more replies
Answer Match 41.16%

I just built a system with xp 1800 chip and k7s5a board, it freezes when i run it at 1.53 mhz but if i lower it to 1.15 it works, is this due to running 256 of sd ram instead of ddr, or do i need to update bios mine being 04/02/00 thanks for any help

A:athlon xp 1800

14 more replies
Answer Match 40.74%

Malwarebytes Anti-Malware (Release December 27th, 2011)

New Features:

Malwarebytes Chameleon technology gets Malwarebytes Anti-Malware running even when blocked by infection.
Incremental updates (paid version only).
Ability to password protect key program settings (paid version only).


Improved reliability and performance of the update process.
Detection and removal engine enhancements.
System tray icon now dynamically displays selected language.
Settings for Protection Module behavior can be changed without protection being active.
Improved DOR (Delete On Reboot) technology to enhance threat removal process.
Restructured log formats to include greater detail on system information and detected threats.
Improved error messages to make them more user friendly.
Scheduled updates now occur within 15 minutes of scheduled time.
Custom log locations now displayed in Logs tab.
Protection logs can be saved in custom locations.
Program version release date now displayed on About tab.

Issues Fixed:

Fix for database not updating properly on Czech installations of Microsoft Windows.
Fix for certain scenarios where scans failed to complete.

A:Malwarebytes release v1.60.1800

Posted it already.

Malwarebytes AM 1.60 Released

1 more replies
Answer Match 40.74%

Recently built a new PC with ASUS P5N-D mobo, Intel Q6600 Quad-Core processor, 4Gb Corsair Ram, XFX Nvidia Gforce 9800GTX+ PCIe card with 512Mb ram, WD 1Tb Sata HD and 650W power supply. Blueray player/DVD RW drive. Installed WinTV-HVR-1800 PCIe card. Used Install CD to install WinTV drivers. Clicked on link to Install WinTV, but shortly after, I receive a small box indicating that the installation is complete, however, nothing but the drivers are installed. I encountered the same problem, on the same PC, whether I was running XP Pro 32bit or XP Pro 64bit. I am currently running XP Pro 64bit. Everything else works fine. I tried downloading the WinTV 4.6+ from the web site and installing it, when I was running XP Pro 32bit. When I clicked on Install WinTV, it gave me an error that began with the word Splash.

Could the Quad-Core processor have anything to do with the problem?

A:Problems with WinTV-HVR-1800

I'm using the older 1800 (back when it was the 1600 PCI card) fine with my system..i use WinRadio a good 12 hours a day, and WinTV to watch news and such.

3 more replies
Answer Match 40.74%

This is really confusing me !

Firstly i have read the recognise your AMD processer thread & the processers in Question are definatly XP2400+ & XP2800+ although i am a noob at this so please be gentle with me

At home i have an mesh computers AMD XP 2400+ & i have just tried to upgrade the Processer to an XP 2800+ by just placing the new processer in place. But when i boot it up it shows as a XP 2000+ this is really Odd i think (maybe you know better)

Also i have taken my 2400+ & tried to put it in the machine that was running the 2800+ (Again by just replacing the processer) & it is telling me it is an AMD XP 1800+ ? i cant figure out what is going on here why are they not recognising the processers correctly

Also i have used Cpuid on the later test & even that say's it's a XP1800+

Please any help is really appreciated as this is an area i would love to start learning

A:AMD 2400+ Showing as 1800+

Which One i have the 2400 in front of me & other is at Home ??

p.s thanks fopr the reply

14 more replies
Answer Match 40.74%

Hi everyone,

I got a Toshiba Satellite 1800-100 dose any know how I can get the power supply off, as it stays on when I turn off laptop? and I have to keep removing the battery.

Kind regards

More replies
Answer Match 40.74%

Ok my question is what is the difference between these 2:

AMD ATHLON XP 1800+ 1.533GHz 1533Mhz OEM Socket A Palamino CPU
AMD Unveils New AMD Athlon™ XP Processor; Drives Initiative to Develop New Processor Performance Metric
Add to Cart

AMD ATHLON XP 1800+ 1.533GHz 1533Mhz Retail Box Socket A Palamino CPU
AMD Unveils New AMD Athlon™ XP Processor; Drives Initiative to Develop New Processor Performance Metric. Retail Box comes with AMD direct Heatsink and fan AND 3 YR Direct Warranty

Obvioulsy the retail has a 3 year warrenty and a heat sink but i am getting a custom one (heat sink that is) but is there a differnce between OEM and Retail?
I need to make sure the OEM will fit my motherboard rather then the Retail (big price difference). I am getting the Abit KR7a Raid Board, the new one.


A:AMD XP 1800 Question when Buying

Make sure the seller gives you some guarantee on the OEM without a restock fee. 60 days is plenty to get the system together and sorted out. If it works for a month it will likely work until it is obsolete if you get a decent fan/heatsink. I don’t think the guarantee is worth the extra money.

If Abit says it will take that processor the OEM will fit.

1 more replies
Answer Match 40.74%

hi all,

i have a athlon xp 1800+ Tbred A and an MSI KT6V mobo.
i got till 1.6Ghz with multi11x and fsb 145 but if i do more fsb my pc restarts every time.
512 mem pc 3200
Fx5200 128mb geforce video card
my vcore is 1.65v but i don't want to go there.

any help please on this i just want to go to 1.8Ghz but they say a athlon xp 1800+ Tbred goes till 2.4Ghz :hotbounce

A:can't get 1.8Ghz of athlon xp 1800+

Overclocking posts, threads & advice...

Threads/Q's about overclocking belongs in the "Cooling & Modding" forum, not here in the "Cpu, chipsets and mobos"Click to expand...


2 more replies
Answer Match 40.74%

I just bought a new computer, my previous one was an XP OS and I have another XP OS in the house. The Router is connected to the other computer. My new computer is Vista Home Premium and to connect to the internet I have a 2Wire PC Port Adapter which was given to me by BT. I have setup the Vista internet the same as I did with the XP OS but every hour or so I get disconnected. The 2 lights stay on when I look at the adapter, which means there is a connection to the internet, but I cant load anything up. I have disabled my firewalls and still nothing.

The only think I could think of was the BT Home Networking drivers they have given me are not compatible for Vista. The connection isn't Ethernet. Im using a USB from the router to the main computer then a wire from my phone line to the 2Wire adapter which plugs into the USB port.

Any help would be much appreciated. Thanks!

More replies
Answer Match 40.74%

I installed Vista Home Edition Premium and my NEC Superscript 1800 printer doesn't work.
Vista doesn't recognize the driver for the printer. I've checked with NEC and they don't have one for VISTA.
Would anybody know where I might be able to locate the NEC driver for VISTA?

A:NEC 1800 Driver for ViSTA

This is the problem with buying a new OS too soon, the rest of the industry has to play catch up.
I am not even going to consider Vista for at least a year
If your printer is a few years old it could take awhile before they get around to creating the the drivers if at all.
They will concentrate on the latest printers first

3 more replies
Answer Match 40.74%

Ok, so today I recieved a Poweredge 1800, with 6 sticks of RAM, a 3Ghz Intel CPU, and 2 hard drives.

I plug the power lead in and 1 of the fans start up (out of 3), I then press the power button and it boots up, taking a while as it is still a server machine. I install a dynamode PCI lan software on it, and select shut down. It was taking a while to shut down so I did it manually by keeping the button pressed in.

I now put the card into the right slot and plug the power back in, yet again the fan comes on, but this time when I press the power; nothing. I have tried disconnectiong various things, and reconnecting them, but still nothing. I just get a green light on the front, and a continous flashing light which is either orange or blue (the light changes colour when i press a button named NMI, I don't seem to know why it wont power up fully and boot.

Can anyone please help?

More replies
Answer Match 40.74%

I was given an Acer Aspire 1800 Laptop most recently, however there's a major failure with this machine. The paperwork from a computer repair shop indicates that the initial problem was that; "The BIOS was inadvertently Flashed by the clients daughter and now doesn't work."
Issue is; The screen displays "Scrambled video" and nearly partially readable but mostly looks like binary data displayed. Basically the machine (BIOS??) has been really turned "Stupid", for lack of any other way to call it. I have original install & recovery disks for WinXP Home. Attempting to force boot from CD/DVD isn't even recognized as (BIOS) looks like totally corrupted! My guess??? - Possibly replace BIOS chip or ???? any suggestions would be appreciated.

A:Acer Aspire 1800

8 more replies
Answer Match 40.74%

Well wasnt sure where to post this, since it is the Tuner card I am using.

I am trying to establish a connection to the tuner card so that I can stream live video from the tv to something like, but the problem is that it just wont work.

I have tried installing Flash Media Encoder, and that works fine, with a webcam, but with the tuner card, all I get are "cant locate device". I keep trying different programs and keep looping and end up giving up everytime, then come back a few days later and try again.

I thought I read somewhere that this tuner wont work, but why not. I'm prolly confused right now and need to get away.

A:Hauppauge 1800 & Streaming

I have this tuner card - can you start at the beginning and tell me how you are trying to stream TV to another site? Also, you are aware that most cable companies will look at this as pirating, right?

7 more replies
Answer Match 40.74%

I just recently put together a computer for a friend with a brand new Athlon XP 1800+ processor (retail package). The motherboard is a Biostar M7VIG Pro also brand new. Everything appears to be working fine, but I noticed when I pulled up the system properties in Windows (XP Pro) it lists the processor as an AMD Athlon XP running at 1.15 GHz. Athlon 1800+ processors are supposed to run at 1.533 GHz. From what I can tell its the correct processor and wasn't packaged incorrectly (Athlon XP processors don't go down that slow anyway, do they?).

Is the speed being listed incorrectly due to a reporting issue with Windows XP or could this possibly be a hardware issue?

The computer does seem to run a little slow, but I think thats due to the # of applications running on the system + only 256MB.

A:Athlon XP 1800+ GHz rating

6 more replies