Tech Problem Aggregator

Mini Dv Camera drivers

Q: Mini Dv Camera drivers

Hey, I have forgotten my JVC software CD at home in Phoenix and I am still in NYC with my family. On the disc, it has both the software and drivers for the camera. I went onto JVC's website, however they don't have any drivers online for download. Do any of you know of any site or any way i can get the software and drivers for it.

thank you for your time

More replies
Answer Match 57.12%

Hello, i was looking for drivers for my Panasonic NV-GS11 MiniDV camera for windows 7, but i only found one for Windows XP. Now i tried installing those drivers under Windows Virtual PC with Windows XP running, but they do not install properly. Is there anything i can do to make my camera work under Virutal PC or Windows 7?

A:Mini DV Camera

Hi,

Have you visit this link?! Panasonic NV-GS11 - Free Download

Kindly check if that's what you need.

2 more replies
Answer Match 56.28%

I have a samsung SCD6040 minidv camcorder. I record something onto a dv tape, and I want to transfer it to my hard drive, and the only way I have figured out how to do this is using the crap software that came with the cam. It doesn't transfer it good quality. I have to play the recording on the cam, then run the software, and I can record it through there onto my hard drive. There is no sound, and the quality is garbage. Is there another way to get the video from the dv tape?

Any help is apprecited
specs in my sig
 

A:mini dv camera question

7 more replies
Answer Match 55.86%

I purchased an minivideo camra ST6000 Vl.00 pen, turned it on and then turned it off, and plugged it into my usb port, and now I can't bring it up for import and see video.  My HP says the software is all installed and device us ready.  How do I get to see what is on my mini video camera, and can it be recorded and saved on my HP Paviliion   

A:mini video camera ST6000 Vl.00

Hi, Please open Windows (or File) Explorer, open it (it should be seen as a drive like flash/USB key) and you can move, copy files from it to your computer like the way you do with any external drive. Regards.

5 more replies
Answer Match 55.02%

I have firewire cable connected in my motherboard and my sony dcr-19 mini dv camera. The camera is turned on and nothing happens. How can i capture my video, in xp i just used win movie maker to capture full dv avi quality, i have also installed movie maker live but i dont se capture button. please help

A:Win 7 dont detect my sony mini dv camera

I would try to reinstall the firewire driver by removing it in device manager and rebooting the computer. Make sure the camera is not plugged in then once windows has done installing the firewire ports check it by going back into device manager then plug in the camera and see if it is found by windows inside the device manager.

9 more replies
Answer Match 55.02%

Both cameras are listed as system devices (in device manager):

"Camera Sensor OV2720" & "Camera Sensor Unicam ar0543".


At imagine devices (in Device Manager) has listed only one "Intel(R) Imaging Signal Processor 2400".

I updated all inside device manager.

Only the 2mp works. The back camera is not working even in skype.

Any official help on that problem ?

A:Satellite Click Mini - camera is not working on Win 10

Originally Posted by cmvrgr


Both cameras are listed as system devices (in device manager):

"Camera Sensor OV2720" & "Camera Sensor Unicam ar0543".
At imagine devices (in Device Manager) has listed only one "Intel(R) Imaging Signal Processor 2400".

I updated all inside device manager.

Only the 2mp works. The back camera is not working even in skype.

Any official help on that problem ?



Hello, happy new year!
Have you managed to find a solution please?
I am desperate with the camera.
Thanks

6 more replies
Answer Match 55.02%

i have been using the built in cameras successfully until a couple of days ago - when i select the camera app the screen shoes the message "To get started, connect a camera"

i have done all the recommended checks with no success (see my other post "external storage device no longer recognised")

what am i missing?

A:Satellite Click Mini L9W-B - camera malfunction

Hi,

Sounds like you're missing drivers, if you've updated to Windows 10, the camera drivers are a bit temperamental, for all I know, they might be temperamental in 8.1. The drivers are not easy to find, go to device manager and see whether anything has been flagged as not-functioning, then dig around a bit in the device information details to try and identify which device is which. The two cameras are:

Camera Sensor AR0543 (rear) and
Camera Sensor OV2722 (front)

The way to install the drivers is to go via device manager, navigate through to the "choose from a list of drivers installed on this computer" option and you'll find them listed under "system devices".

Hope this helps!







Originally Posted by stickyfingerstuff


i have been using the built in cameras successfully until a couple of days ago - when i select the camera app the screen shoes the message "To get started, connect a camera"

i have done all the recommended checks with no success (see my other post "external storage device no longer recognised")

what am i missing?

5 more replies
Answer Match 54.6%

hi there! anyone could help me please. after upgrading and installing windows 10 back camera doesnt function anymore. what will i do to solve this problem? please help. thanks

A:Satellite click mini back camera problem

Click Mini - Camera driver fix
------------------------------
This has two cameras:
- "Front" is a low resolution webcam above the screen. I think this uses an OV2722 sensor.
- "Rear" is a higher resolution camera in one corner of the white case. I think this uses an AR0543 sensor (Intel AVStream camera)
When I got the Click Mini (Win 8.1) only the rear camera was working. After the Win10 upgrade only the front webcam was working
- the earlier forum discussion below gave me enough information to fix the problem.

1. In Device Manager there are three relevant entries:
- under Imaging devices there was a single entry for "Imaging Signal Processor 2400"
- under System devices there were two entries: Camera Sensor OV2722 and Camera Sensor Unicam ar0543
2. The driver for Camera Sensor Unicam ar0543 is OK(10/07/2015) but you need to let it search online for updates of the other two.
- With Camera Sensor OV2722 it just does an updated driver from 2014 to 15/06/2015
- With "Imaging Signal Processor 2400" it updates the driver (to 04/07/2015) but the Imaging devices entry changes to "Intel AVStream Camera"
3. Win10 then tells you to reboot as there has been a hardware change.
- after that the camera app has an extra button which lets you switch between the two cameras and both work fine.

1 more replies
Answer Match 54.6%

I don't know how to select the rear camera in camera app. There is no button with 2 rounded arrows. Only a button to switch between photo/video. In Device Manager both camera's are working properly. The TruCapture app also only uses the front facing camera.

A:No Rear Camera Windows 10 Satellite Click Mini L9W-B

Here you are https://www.dropbox.com/s/86v3pjrfop...amera.zip?dl=0

you need to go into device manager and there should be a device that is not installed. right click on it and update driver and "have disk" and point to the directory

19 more replies
Answer Match 53.76%

Hi, I just got this from HSN today. I am going on a trip to the Middle East in June.

I have never owned one like this, and I am NOT good with cameras.

Would like to know please, what options to have if the video battery only lasts 2 hours? Where to buy extra battery?

Also, the camera comes with 4 mgs of memory, should I get more memory and if so, why? Thanks.
 

A:Solved: Kodak 1080P Playfull Mini Camcorder/Camera

7 more replies
Answer Match 49.56%

Hi does anybody know where I could find drivers for the Lenovo Thinkpad Mini 10 (3507-A23)?Its not the X100eWindows 7Thanks

More replies
Answer Match 49.56%

I recently installed Windows 7 (Professional) on a HP 300-020. I'm trying to locate drivers for the following devices:  BCM43142A0USB\VID_0A5C&PID_216D&REV_0112USB\VID_0A5C&PID_216D Ethernet controllerPCI\VEN_10EC&DEV_8168&SUBSYS_2B38103C&REV_0CUSB\VID_0A5C&PID_216D&REV_0112PCI\VEN_10EC&DEV_8168&CC_020000PCI\VEN_10EC&DEV_8168&CC_0200PCI devicePCI\VEN_10EC&DEV_5229&SUBSYS_2B38103C&REV_01PCI\VEN_10EC&DEV_5229&SUBSYS_2B38103CPCI\VEN_10EC&DEV_5229&CC_FF0000PCI\VEN_10EC&DEV_5229&CC_FF00SM Bus controller PCI\VEN_8086&DEV_9C22&SUBSYS_2B38103C&REV_04PCI\VEN_8086&DEV_9C22&SUBSYS_2B38103CPCI\VEN_8086&DEV_9C22&CC_0C0500PCI\VEN_8086&DEV_9C22&CC_0C05 Universal serial bus controllerPCI\VEN_8086&DEV_9C31&SUBSYS_2B38103C&REV_04PCI\VEN_8086&DEV_9C31&SUBSYS_2B38103CPCI\VEN_8086&DEV_9C31&CC_0C0330PCI\VEN_8086&DEV_9C31&CC_0C03  Any help would be appreciated. Thanks.  

A:Windows 7 drivers for HP Mini 300-020

 Hi, BCM43142A0http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_121078_1 Ethernet controllerhttp://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_123192_1&sp4ts.oid=5229457#tab4 PCI devicehttp://www.realtek.com/Downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownType... Universal serial bus controllerhttps://downloadcenter.intel.com/download/22824 SM Bus controllerhttps://downloadcenter.intel.com/download/20775

1 more replies
Answer Match 49.56%

Hello computer comrades!

Once again I have ran into a problem that makes me want to bang my head against the wall over and over. My friend just bought an HP Mini off of someone he knew, and all of the network drivers are missing. My initial solution was to go to www.hp.com, input the model # and/or serial # and download the drivers straight from there. No problem right? Well, I cannot find the model # or serial # of this tiny notebook anywhere! I called HP and they told me that there should be a sticker on the back with both listed there, however, they are not.

I went to www.hp.com to just see if I can guess which model this is, but there are hundreds!

Is there any way I can find out the model # of this HP Mini without this sticker that should be on the bottom?

Thanks,

Charlie
 

A:HP Mini Network Drivers

11 more replies
Answer Match 49.56%

I upgraded this little netbook to WIN 10 and it ran really poorly.  Finally gave up and went back to WIN 7. Apparently I need to update the drivers to get my wireless connection to be seen.  HP site only said No drivers available for this PC. HELP!! I don't know what to do or how to get my machine to work the way it used to! 

A:311 Mini PC drivers not available on HP site

Hi: I think you should be able to use the W7 drivers and software from the 311-1100 series notebooks on yours. Looks like the 1100's have the same hardware as the 1000's. Do not use any of the BIOS or firmware files though. http://support.hp.com/us-en/drivers/selfservice/HP-Mini-311-1100-PC-series/4074229

4 more replies
Answer Match 49.56%

Will some of the drivers work with Windows 8? Card type is an Intel Atom, processor 1.6 ghz, 60 gb hdd, memory 1 gb (would like to upgrade to a 2 gb if there is a card that is compatible with this model HP Mini Netbook 1000). Currently has XP Home 32 bit and I can't get product key installed because characters rubbed off of Microsoft sticker. I know it's old but netbook can be used for pc computer games.

A:HP Mini 1000 drivers

If you want to try before you buy there is an enterprise trial, Try Windows 8.1 Enterprise | TechNet Evaluation Center.
There is also an upgrade advisor that will give info on compatibility, Upgrade Assistant: FAQ - Windows Help

2 more replies
Answer Match 48.72%

Hallo,
I reinstall windows 10 from reset feature in windows 10, Click mini have some missing drivers now. Anyone know how to get all missing driver as below

thanks in advanced

More replies
Answer Match 48.72%

I have a HP Mini 1101 netbook which originally came with Windows XP Home. That OS suffered some hal.dll error, so I took the opportunity to upgrade it to Windows 7 Ultimate. I want(ed) to update the drivers but according to HP's support site for this netbook it only covers XP Home & Professional & Vista Business & Ultimate.
I was wondering if would be advisable (I personally don't think it is) to update using the Vista Ultimate drivers?

Thanks.

A:Updating HP Mini 1101 Drivers

hi srasc , update your drivers using vista ones in compatibility mode the vista drivers will work perfectly well in windows 7

4 more replies
Answer Match 48.3%

I recently purchased a Digitrex DSC 3000 digital camera. I am using Windowsw XP Home On a Dell Inspiron 5150 laptop. I can't seem to get the camera drivers to install correctly. I Would appreciate it if someone knows where I can find the most recent drivers for this camera, using win xp.
 

A:camera drivers

9 more replies
Answer Match 48.3%

Hi

I am having trouble with camera drivers.
I run windows 7 Home Premium N x86 on a Dell XPS M1330 (new install from Vista)
everything on the pc is working fine execpt when I try to attach a camera to the PC and it says the drivers have not been installed and when I do a search/ trouble shoot it says there are no drivers for the camera.

there are 2 camera in particular I am using, a Canon 40D and an Iphone 3gs.

I have tried to reinstall itunes to see if that helps with the driver but no luck and I have also tried to manually install the canon driver which says it is complete but does bot work.

All other USB devices work fine- external HDD, Sony eReader, mouse and keyboard.
the Iphone shows up in 'Devices' as Unknown and the canon does not show up at all!

been on the phone to all sorts of help desks but they all uselss.

much appreciate any help

thanks

A:Camera Drivers

The 40D IS compatible with Windows 7. You may try the import feature in Windows or the software with the camera. You might also try another USB port. I have problems with my Canons using my front panel USB but the back one son the motherboard work fine. Just a thought. Good luck. I don't know about the IPhone, but I assume it's compatible too.

You might check here

Windows 7 Compatibility Center home

5 more replies
Answer Match 48.3%

I have a Vivitar DVR 688 camera and Xp will not recognise it.
The disc that came with it only has drivers for '98 & ME.
I have searched the net but I can find nothing.
Another company, Sakar took over Vivitar, but they don't
have the model listed.
Any help will be appreciated.

Mike.

A:DV Camera Drivers

It looks like it should appear as a USB mass storage device under XP, driver only required for Win98. What happens when the camera is plugged into a USB port?

3 more replies
Answer Match 48.3%

hi

am trying to download pics from digital camera. UMAX AstraPix490. have lost disc!

been on UMAX site but only getting options for Scanners........any ideas?

thanks
mags
 

A:drivers for camera

16 more replies
Answer Match 48.3%

Sorry to be pain but I'm looking for drivers for a prolectrix usb PC camera (nothing flashy its just one that I hope works). Can anyone point me in the direction of a good site that isn't basically another search engine which makes you download crappy spy-ware laden tat first?

mucho appreciation
 

More replies
Answer Match 48.3%

Not sure if this is the correct forum... I am looking for a free driver for my IBM PC Camera Pro. It was a good cam and worked well under windows 98se, but now i have updated to Windows XP pro and am wondering if there are drivers out there which allow this cam to work with XP.... any advice will be appreciated.... thanks herbie
 

A:IBM PC Camera Drivers

You might try the one for win 2000. Quite a lot of devices will work with the 2000 drivers running under XP. http://www.camera-drivers.com/companies/1952.htm
 

1 more replies
Answer Match 48.3%

I bought an HP Mini 110-3015dx with Windows 7 starter pre-installed.  I have since swapped out the HD and loaded XP Pro onto the mini (by slipstreaming the SATA drivers -- what a pain).  Anyway -- I started looking for the drivers for the hardware, and the driver .exe that HP lists for the machine for the WLAN won't work.  I run the executable, restart, and nothing -- no new network adapter shows up.  I've tried mapping the driver directly to the extracted folder that's created in c:\SWSETUP, but there are no configuration files (only cabs and executables), so I cannot manually add the driver. Does anyone know the chipset and have a link to the drivers so I can manually map them to the unrecognized devices?  Or is there some other fix?  As much as I like Windows 7, I need XP on this machine. thanks,WLH

A:Mini 110-3015dx Wireless drivers for XP Pro not working

it does this same thing when you upgard to the full windows 7 - even though that is what HP recommends you do. Then HP will tell you to spend $60 for them to fix the problem - becasue this computer is not compatable with anything other than the windows 7 starter - its just a way for HP to make more money once you buy the product.

3 more replies
Answer Match 48.3%

Hey everyone, I was wondering if someone could help me out.I've installed Windows 10 (Not an upgrade) on my HP Mini, I've a couple of issues with drivers but the first one I want to tackle is my bluetooth. In windows 7 it is listed in device manager as:  worked.Atheros 3011 Bluetooth 3.0 + HS Adapter However there doesn't seem to be any bluetooth device in my device manager in Windows 10.  I tried installing the Windows 7 drivers as it's worked on other laptops with friends and family but no such luck in my case. ---------- I have noticed though that my Wifi card is also detected as a different Atheros model than it was previously in Windows 7 too.Windows 7 Device Manager:Atheros AR9285 802.11 b/g/n Wifi AdapterWindows 10 Device Manager:Qualcomm Atheros AR9485 802.11 b|g|n Wifi Adapter Wifi works just fine as it is, but I know some wifi cards will have bluetooth combined and so I've tried install the Windows 7 drivers also for my particular card from HP Support but hasn't made a difference.I've also been looking around the internet for drivers and can't seem to find any official support or downloads for these devices.  Has anyone else had this issue and could share with me how to restore functionality to my bluetooth adapter? Many thanks in advance folks and for reading my post.Keith

More replies
Answer Match 48.3%

Hello, I have a problem with an HP Mini 110 wich i have just reformarted with windows 7, the problems with the drivers where actually manifestating before, I thought that with the formating and the windows 7 instalation would be solved. In the hardware devices list i can see that the network controller, the video controller and the ethernet controller are missing, i tried to install the drivers given at the official website but none of them worked. Please help, i can't connect the computer to the internet! I think that wifi card or internet card, whatever name has, has no drivers installed or they just "dissapeared".

A:HP Mini 110 Missing drivers (Network and Video)

@gerox300 To better help you we would need the exact model number or product number of your laptop/desktop??? http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00033108 REO

3 more replies
Answer Match 48.3%

Hallo,
I reinstall windows 10 from reset feature in windows 10, Click mini have some missing drivers now. Anyone know how to get all missing driver as below

thanks in advanced

More replies
Answer Match 48.3%

Hey everyone, I was wondering if someone could help me out.I've installed Windows 10 (Not an upgrade) on my HP Mini, I've a couple of issues with drivers but the first one I want to tackle is my bluetooth. In windows 7 it is listed in device manager as:  worked.Atheros 3011 Bluetooth 3.0 + HS Adapter However there doesn't seem to be any bluetooth device in my device manager in Windows 10.  I tried installing the Windows 7 drivers as it's worked on other laptops with friends and family but no such luck in my case. ---------- I have noticed though that my Wifi card is also detected as a different Atheros model than it was previously in Windows 7 too.Windows 7 Device Manager:Atheros AR9285 802.11 b/g/n Wifi AdapterWindows 10 Device Manager:Qualcomm Atheros AR9485 802.11 b|g|n Wifi Adapter Wifi works just fine as it is, but I know some wifi cards will have bluetooth combined and so I've tried install the Windows 7 drivers also for my particular card from HP Support but hasn't made a difference.I've also been looking around the internet for drivers and can't seem to find any official support or downloads for these devices.  Has anyone else had this issue and could share with me how to restore functionality to my bluetooth adapter? Many thanks in advance folks and for reading my post.Keith

More replies
Answer Match 48.3%

I just powered this new monitor out of the box.   All is working fine, but I want to load the latest driver software into my Mac   to get all the flexibiliity available.    The HP support website did not have a listing for these drivers and suggested I try the forum for where to find them,  assuming they are available.  So here I am.  Thanks in advance for your help.Dan_the_Man_67

More replies
Answer Match 48.3%

Hi Guys,

I've been trying to get this device to work for hours, and no matter what I do, I keep getting a messege saying the device driver software was not succesfully installed.

Under Bluetooh Peripheral Device, it says no drivers found.

Has anyone successfully installed the Belkin's Mini-BT dongle, and if so, can someone give me a step by step, how-to on how to do so?

On my iPhone, under Bluetooth, it says that I'm connected to the PC, but on the PC, it says that the BT device needs trouble shooting, and it won't allow me to transfer any files to the iPhone.

Really, the primary reason I got the BT dongle was so that I could use the iPhone's 3G service as an internet connection when I'm away from home.

I'd appreciate any help.

A:Belkin Mini-Bluetooth Drivers - F8T016

Have you been using the system-included drivers, or drivers from an installation disc/download? I'm thinking they're not compatible. Are you on 7 64-bit or 32-bit?

EDIT: I see they work on Vista 32-bit and 64-bit, which means they'll work with both versions of 7. Vista drivers should work with 7.

7 more replies
Answer Match 47.88%

Hi all, nice to be here and hope you may be able to help.

I was using Spacemonger (with Windows Vista Basic) the other day to clear out (what I thought was) unnecessary toot on my computer HD and I think I've got rid of something fairly important.

I was reading this: http://www.mydigitallife.info/2007/12/19/tips-to-slim-down-vista, and on their advice removed the 'Filedepository' folder. Now my plug-and-play devices won't work.

I'm using a Fujifilm s6500 digital camera which should work automatically with Vista. However, when I plug it in now it's saying it can't find the drivers and that I need to insert a driver disc, which I don't have, nor did I ever have. I've tried downloading the drivers from the Fuji website to no avail. Anyone have any ideas? I'm fairly sure when I first plugged it in it worked straight away without any need to drivers, so I think it must be something I've done faffing about with things I don't really understand.

Any help would be great as I'm tearing my hair out here. Thanks in advance!
 

A:Think I deleted camera drivers

13 more replies
Answer Match 47.88%

I have a Sony digi cam that I have used for 2 years. We just purchaced aonther one and I want to know if I can have more then one driver on my computer?
 

A:Digital camera drivers.

6 more replies
Answer Match 47.88%

ok heres my situation. I opened up my case and cleaned it, and plugged everything back when i was done, and apparently it reads that my 4 in 1 webcam needs to be installed. I realize that the disk has installation for windows 2000me, and below but not for XP. So i would think that i would need to get the new drivers from the manufacturers website, but im at aloss to find it. Could anyone point me in the right direction?

The camera is a ViewQuest 680 4 in 1 Digital Camera
 

A:computer camera drivers?

8 more replies
Answer Match 47.88%

Hello every one I thought I would let you all know that my error problems are over. I installed a new very large H.D. I did not get a chance to save my info before my first H.D. bit the dust. I have only one regret and that is, I can not find my install disk for my digital camera and Hewlett Packard won't replace it or let me download the drivers for it without paying them for the cd and for shipping.

Since I need my camera for work and I need it 3 days ago! LOL can someone tell me if there is a way to get the drivers or what ever is needed to make my camera download the pics on to my pc?
Maybe someone has a H.P. PhotoSmart C200 installation disk laying around that I could copy (never hurts to ask), right?

Any advice would be greatly appreciated as always, Don't know what I'd do with you!!
 

A:Need drivers ? for my digital camera

6 more replies
Answer Match 47.88%

Hi I have not posted here before,
I have to know something about computers to do accounting (please don't hold that against me).

A few weeks ago, I upgraded my system to Windows 7 - for many reasons. I have an inexpensive Argus Bean "Sprout" camera, and the small CD that came with it did not have drivers for Windows 7 (it was not out yet). What a nightmare!!! www.drivermanager.com would not even let me search after visting their sight and wanted $30 for something I do not need, what's worse is that it took over 8 hours to figure out why Norton Symantec PC thing kept uploading itself and turning itself on.

Am I the only person hit by this?

Is there any way to get the driver for Windows 7 for this cute, little camera I really love?

Any help would be appreciated.

A:Windows 7 Camera Drivers

small CDThis small cd is the driver for your webcam regardless of any operating system. what's worse is that it took over 8 hours to figure out why Norton Symantec PC thing kept uploading itself and turning itself on.If its updating its normal unless you expound more on some messages being shown as I do not use Norton. Is it a trial version?

4 more replies
Answer Match 47.88%

Digital Dsc Pro M# KSX-X9905
Camera manufactured by xirlink
Need driver for Windows XP Home Edition
 

A:Digital camera drivers

Try this link for possible driver.

http://www.input-drivers.com/drivers/42/42199.htm
 

3 more replies
Answer Match 47.88%

I recently swapped hard drives from one laptop to another. Both of them ran Windows 7. I figured there'd be some random problems, but I didn't see the drivers never being able to work. I've tried the fix it things on microsoft, I've tried downloading drivers from Gateway but none seems to work. I REALLY don't want to re-image because I have programs that I no longer have access to.

Its a Gateway with an intel core, 320 gb hd, 4mb ram.
The 320 gb hd is coming from an HP Pavilion dv4 which was an amd I think.
Both computers had legit Windows 7 installations.

CD's don't register, the camera doesn't work, the ethernet thing says its not installed and the USB drives don't work. No power, nothing. During each attempt to install, it says installation failed or unsuccessful.

Please help.

A:USB/CD/Camera Drivers not working

Quick update..... its a Vision AMD in the HP

and the USB drive WILL supply power to the laptop cooling thing I put it on.

5 more replies
Answer Match 47.88%

I need to find a driver for a sandisk cruzer mini 256mb. I am running windows 95. I do have 2 USB ports and they are working correctly now.
 

A:drivers for windows 95 for a sandisk cruzer mini 256mb

A Windows 95 driver does not exist for this device. http://www.sandisk.com/retail/drivers-sdcz2.asp
 

3 more replies
Answer Match 47.46%

I am in need of drivers for a VuPoint DC-310 VP Digital camera for Windows ME. I want it to work on my Windows ME machine. Both my Windows ME and Windows XP Profesional PCs do not have the drivers. They are not listed on the VuPoint web site.
 

A:Drivers needed for VuPoint DC-310 camera

is this any help?

http://forums.techguy.org/showthread.php?t=264471
 

1 more replies
Answer Match 47.46%

Has anyone found any drivers that will work with slightly older Sony digital cameras , like the DSC-S30 and DSC-F505 ?
The Win XP USB driver from Sony will not work , even after Win 7 tries to install using recommended settings .

A:Sony Digital Camera Drivers

Are you sure you need any drivers, doesn't it just install them when you plug the camera in?

6 more replies
Answer Match 47.46%

PC camera with Mic, Model# VW903
Here is the link to the product: http://www.vetac.com/product_show.asp?id=142

Looking for drivers for XP pro.

Thanks in advance for all the help.

Cheers
 

A:Looking for drivers for PC camera with Mic model VW903

6 more replies
Answer Match 47.46%

I have this usb camera (webcam) made by ZSMC and for some reason its drivers doesnt work. I was just wondering if there are general drivers for webcams which would generally work perhaps?
 

More replies
Answer Match 47.46%

I have an older model U.S. Robotics webcam that we had Windows98 installation software for. So, of course, when we upgraded our computer to WindowsXP the camera no longer worked. We found drivers through the Hauppauge program called WinTV2000 that are supposedly compatible with the BigPicture camera and herein lies my problem.

I deleted what I had tried to install with the original disc since it wouldn't let me get too far anyway. Then I installed and ran all the drivers that I needed for the WinTV2000 program. Then, my big proud moment, I clicked on the WinTV2000 icon to start the camera and was greeted with a message that now has me cursing "Failed to create TV window. Another application may be using the driver" It then only gave me the option to close out the window...didn't offer me any help in how to find what else could be using the driver.

Any suggestions or help?? I would be so appreciative if anyone has some thoughts or ideas on this.
 

More replies
Answer Match 47.46%

Hi. I accidently removed drivers for integrated camera today. OK... no big deal, right? I went to Lenovo' support website http://support.lenovo.com/ru/ru/products/Laptops-and-netbooks/ThinkPad-T-Series-laptops/ThinkPad-T54... here, downloaded latest driver for Sunplus/Realtek camera wich was 1.0.0.2, and tried to install it... and... it didn't work. Installer freezes on this step: SPSetup.exe /i /f Setup.ini /l Uninstall.ini and couple of minutes after throws a message that camera wasn't found. Where I can get a version which works? According to http://support.lenovo.com/ru/ru/partslookup I have Chikoni camera installed.

More replies
Answer Match 47.46%

I bought camera from a friend(GrandVision model CoolDV Z1 by GrandVision)without any software, I have done lots of searching on the internet looking for the driver to hook up to my win98 machine, but had no luck. I have tried the manufacturer website wich
strangely enough is sometimes up and sometimes down, but it is one of the
models without any support , the camera wasn't cheap, so I woudl really like to use it, can somebody out there help with the drivers?, or
does anybody have any ideas as to what options I have? I do have a USB cable wich hooks up to my machine, but win98 doesn't recognize what it is when its trying to install it. any help, or sugestions would be greatly appreciated

thanks
goldenonefan
 

A:bought camera w/o drivers, now need'm badly

Without the drivers its not good for Windows 98

The drivers are "not available" on the makers website, so unlikely anywhere else.

The simple solution is to not use the "internal memory" and use a memory card. Buy a card reader which will have drivers available for 98.
 

2 more replies
Answer Match 47.46%

The logitech drivers that are needed for the quick cam are 8.1.5 for windows its an quick messanger but in the logitech website it dont have it any ideas where can get it thanks.
 

A:The camera is logitech drivers needed

what's the model # of the webcam???
 

3 more replies
Answer Match 47.46%

i have Intel (r) PC camera cs630. i want driver for it please help.

i have window service pack 2

id for that ....USB\VID_8086&PID_0630\5&EE6F4E5&0&1
 

A:Drivers for Intel PC camera cs630

Try this link... http://members.driverguide.com/driver/detail.php?driverid=85519
 

3 more replies
Answer Match 47.46%

I recently had to perform a system restore and when I tried to re-install my Kodak Easyshare and digital camera drivers the easyshare loads no problem. When I connect camera with USB cord says it's loading drivers but halfway through fails with a message to contact manufacturer for drivers. I have gone to their site to get drivers twice with uninstalling easyshare. Still happens. Any thoughts on what's happening here?
 

A:Kodak Digital Camera Drivers

Easy Share and it's drivers are not needed to run your Camera.
Is it too late to restore back to before you tried to install Easy Share ...
and see if you can work without it ??
 

1 more replies
Answer Match 47.46%

hi there i have an old digital camera with no brands or name, win7 detectes it but cant find a driver for it, in device manager i found some ids:
hardware id
USB\VID_0979&PID_0227&REV_0100
USB\VID_0979&PID_0227

compatible ids:
USB\Class_00&SubClass_00&Prot_00
USB\Class_00&SubClass_00
USB\Class_00

inside the camera there are no names or brands only can see a samsung chip that i think is the internal memory card
samsung 649
K4S161622H-UC60

is there any generic driver i can use to try work with this camera?

A:need drivers for old digital camera usb 1.1 no brand

Some older usb device just wont work because there are no drivers for them with the newer OS's. Most likely will not be supported any more. With out a brand name of said device it's almost impossible to find any information on the device.

2 more replies
Answer Match 47.46%

Hi. I got problem, my win 7 pro, not detect that camera via usb cable, on xp work just fine, I think is USB driver issue, I cant find any driver for win 7 and system even not detect that camera.

So is any universal driver or I may use drivers for xp ?

Thank you.

A:sony DCR-HC53 camera drivers

Hi there ... Have you tried the new Version of the Software .. PlayMemories Home (PMB/Picture Motion Browser successor) - Windows
Software update procedure , 06/12/2013 It states that works with Windows 7....

3 more replies
Answer Match 47.46%

Due to hideous misfortune I had to do a clean install of my personal copy of Windows Vista and remove the stock Windows XP from my netbook.

Many drivers were added my Microsoft during Vista installation but I have no adapter drivers for either wireless or ethernet controllers. Under device manager I have no category for Network Adapters but instead those two controllers are listed under "Other Devices".

Under HP downloads I found the driver for Qualcomm Mobile Broadband Drivers - Gobi1000 when I went through the process of stating my product ID and OS (Windows Vista Home Premium 32bit). I downloaded it onto my pc, saved it to the flash drive I had to use earlier as a bootable drive to install Vista (knew the lack of native cd/dvd drive would eventually haunt me) and then moved the flash drive to the netbook to run install.

After running the setup a blank 'ms-dos' window popped up, stayed blank and then disappeared. There was no confirmation of success of failure in regards to installation of the driver. But under Device Manager they are still listed under other devices and I am unable to do anything with them.

I downloaded, transported and ran the setups for HP help and support as well as the Wireless Assistant. Both run fine on the Mini. The wireless assistant simply states that Windows has no controllers assigned to find connections to maintain.

I was curious as to whether or not there was something I was missing, the driver was the inco... Read more

A:Mini 110 (1030NR) missing ethernet and LAN adapter drivers after upgrade

If you can get your hands on a third party/USB wireless adaptor, you might be able to use windows update to get the drivers. I've had to do it a few times with an older DELL machine I have.

8 more replies
Answer Match 47.04%

I am using native camera API in an android app development, the camera preview doesnt display the camera's best resolution, it looks dull, compared to how it looks when using the native camera of the device.
How can I fix this? I am sing the android's native camera api, and not intent, as I need the API usage to performs some functions with the camera.
 

More replies
Answer Match 47.04%

Hi again guys. As i am in the process of setting up my new rig, have any of you had any experience or issues involving Canon drivers for digital EOS cameras such as the Eos30d or Eos5D?

System...
Vista Ultimate 64 bit
Intel X9000 2.8ghz
2x 320gig HDD,s @ 7200rpm
4GB ram DDR2
Nvidia 8800m GTS
20"WUXGA

...any info would be greatly appreciated.

A:Vista Ultimate 64 bit & Canon Camera Drivers???

Hi Exotica,
You might want to try checking with Canon's website for the latest drivers and up to date info.
Raj

3 more replies
Answer Match 47.04%

Are there universal digital camera drivers or is there a software to load that will protect me from probs (other than using restore) when installing drivers and such. I had one when I used win 98, I think I've seen similar for xp, but nothing for win me... With this software turned on, you were able to download things and even use them and then turn it off and it was like you didn't even make changes to the computer. I think I recall them saying it was like drawing on an overlay, the original isn't touched.

I just got my computer working again from trying to load Kodak drivers for dc290 on my windows ME. I tried it from the cd and from the net...
 

A:Solved: Are there universal digital camera drivers?

11 more replies
Answer Match 47.04%

I am trying to download the Drivers for the Photosmart E 337  Camera on a Windows 10  64 Bit  system, the CD I received for the Camera will not run a set up. It says that it was only good for Windows Vista, XP Home, XP Professional, XP Professional x 64 Edition

More replies
Answer Match 47.04%

O k this is a long and probably repetitive request has anybody figured out how to make the webcam work on Windows 10 upgrade from Windows 7 64 bit?

More replies
Answer Match 47.04%

Hi,
I need help fixing failed installation of drivers for a NIKON DSC COOLPIX L12-PTP digital camera.

I attached the USB cable and camera to my PC and got options. I chose Locate and install driver software. A window soon appeared with the message:

Windows found driver software for your device but encountered and error while attempting to install it.

Digital Still Camera

The account specified for this service is different for the account specified for other services running in the same process

There was no number assaciated with the error message.


I then tried to figure out after opening Task Manager as Administrator what the services are that should all be associated with the same account in the same process. The only process that I could see that seemed like it might be the appropriate one is NKMonitor.exe (PID 2636). I right clicked on it and then on go to services, but there was nothing highlighted to show any related services.

I opened the file location of the process and it was C:\Program Files\Common Files\Nikon\Monitor\NKMonitor. This is a program I downloaded a few days ago from Nikon's website to try and fix the problem I'm having with driver installation. I couldn't find the drivers for my camera on their website.

Can anyone tell me how I can find out what the process is that's associated with installation of the camera drivers? How do I find what all the services are that are running in that process?

I'm familiar with Services and using Com... Read more

A:Failed installation of digital camera drivers

I don't recall running into that error message. I see you have HP. I've had a string of them and found this forum to be excellent:

HP Business Support Center

It says "business" but it's not paid support. It's users answering questions like here. Just everyone on there has had HP machines for some time.

My inclination would be to uninstall the original software. But before doing too much I would try the HP support site. It also has all the original software, drivers, user manuals that came with the PC if it's a standard package.

Registration is free and when I signed up they accepted hotmail as an email with no complaints.

edit: that said you may get a good answer here still. The HP site is good to have in your bookmarks in any case.

4 more replies
Answer Match 47.04%

I am trying to install the drivers for my Samsung s730 digital camera. I followed all the directions carefully and keep getting this error message

The driver installation file for this device is missing a necessary entry. This may be because the INF was written for Windows 95 or later. Contact your hardware vendor.

I un installed everything that had to do with the camera and tried re-installing the drivers from their website. I didnt recieve that error message that way but in device manager it still says that the drivers are not installed. When I plug the camera in it is recognized in device manager under unknow devices and has my cameras name on it with a yellow mark. I have a dell- Win xp SP2... I have tried everything and nothing is working! Does anyone know wha tthis problem could be?
 

More replies
Answer Match 47.04%

Hey, everything is going great for me in vista64 so far. Just one problem. I am unable to digitize footage with my video camera in vista 64, the camera is not picked up, or if it is, when I try to capture, it fails after a few seconds. However, it works perfectly in vista 32. So I can only suspect that its the OS thats giving trouble as my firewire port and drivers for my system seem to be working perfectly in vista 32.

Is there any new updates for vista 64 that may cover this issue or is there any way that I can bring it to Microsoft's attention so that they may work on a solution?

Thanks in advance.

A:Vista 64 video camera (firewire) drivers

Your camera may require 64bit drivers to communicate.
Think it as a analog singal to Digital (may not be the correct analogy) but the two arw complely different.
I had to purchase a new digital web cam as the 5 others i had would NOT work in 64bit.

I hope this helps

Regards Sentar

4 more replies
Answer Match 47.04%

There's a huge issue with the Catalyst Legacy drivers AMD released for 2000 to 4000 series cards. After installing them, the Camera app displays the following problem after launch:

"Sorry. The camera app cannot be used with this version of Windows"

Reverting back to stock Windows 8 drivers solve the problem.

Anyone has the same problem?

A:Camera app issues with Catalyst Legacy drivers

yes. the catalyst legacy drivers have a ton of problems with Windows 8.

try to do any of your streaming apps or DRM apps with them... to save you the time, you can't. they won't work.

1 more replies
Answer Match 46.62%

I did a windows 7 clean install on my HP Mini 210 4051 nr as part of creating a dual boot with Ubuntu. In Linux the internet works fine, but in Windows 7 it does not. In the device manager I see yellow flags over the ethernet and network controllers. Code 28 (My model does have an ethernet port).

Because the machine cannot connect, I downloaded all the related drivers (everything from the network tab) from the HP website for my model with another computer and then put them all in a folder on the Mini's desktop via USB. When I try to install the drivers through the device manager, and direct it to that folder, it says it finds nothing usable.

Here are the IDs

Ethernet Controller
PCI\VEN_10EC&DEV_8136&SUBSYS_338D103C&REV_05

Network Controller
PCI\VEN_1814&DEV_5390&SUBSYS_163610C&REV_00

Any suggestions will be appreciated!

A:HP Mini -Clean Install -Ethernet & Network Controller Drivers Missing

Instead of pointing device manager to those files, have you tried just running the .exe files you downloaded?

That worked for me when I did a clean install on my HP laptop.

1 more replies
Answer Match 46.2%

my sony vgn-sz75gn with new windows 7 is not running my built in camera but it was working with previously installed windows 7. it is detecting the hardware bot not working and i also want a driver for my touch pad scroll..!!!

A:windows 7 drivers for touchpad scroll and motion eye camera

  
Quote: Originally Posted by bhaba


my sony vgn-sz75gn with new windows 7 is not running my built in camera but it was working with previously installed windows 7. it is detecting the hardware bot not working and i also want a driver for my touch pad scroll..!!!


Go to sony and download the appropriate driver for your model and camera (32 bit or 64?)

9 more replies
Answer Match 46.2%

Hi,

Only had my computer a few months, but it won't recognise my camera anymore when I hook it up by USB, and there's no memory card.

I'm posting here because I think some update on the computer may have overridden or blocked the camera's drivers. The odd thing is that it doesn't even give you the option to reinstall them.

Is there anyway to check whether the computer has missing, blocked or corrupted drivers?

Thanks

A:Computer no longer recognising camera (missing drivers?)

What is the make and model # of your computer? Is it a Laptop or a Desktop?
What is the make and model# of the camera?
If you have had the computer for a few months,and the camera is separate, how long have you had the camera? You get free support from the computer manufacturer, if the hardware has failed, you can get it fixed or replaced for free.
You shouldn't have to monkey around with a new computer, the manufacture should help you, but if you want to fix it yourself,
With the camera plugged in, Go to Search and type devmgmt.msc, Right click the devmgmt results and Run As Administrator. In the Elevated Device Manager, are there any devices with yellow flags? if so, these devices need drivers installed.
If there are no yellow flags, is there an Imaging Device listed? If so, this is your camera.
If there are yellow flags for the camera, go to the camera's manufacturer support/download drivers site, type in your model # and download the driver for your model camera and version of Windows (eg) 32bit or 64bit.

1 more replies
Answer Match 45.78%

Hi all,

I have been in great fuss looking for drivers but all in vain.
The sound card seems fine and produces a welcome sound at the Vaio logo appearance on booting. Afterwards there is no sound on playback. I just feel tired looking for those drivers any further.
I am looking for

1) Audio driver
2) Camera driver

The model number is: Sony Vaio PCG-8V2M

Please revert in case u land up at something worth a shot.
Thanks

Regards

A:Can't find drivers for Audio and Camera for Sony Vaio PCG-8V2M

The Sony site only lists Windows XP drivers for this model and the XP drivers are incompatible. Thus, if windows has installed the generic HD Audio Codec, that is the best you will be able to acquire.

I have no idea about a camera driver.

2 more replies
Answer Match 42%

Hi I am looking at these two laptops. Currently at home I have vodafone mobile broadband. I read that these 2 laptop are not compatible with mobile broadband for whatever reason. Is this true? and if this isnt true I have my mobile broadband installed on another laptop, I am guessing it is okay to install on 2 systems, thanks a lot in advance
 

A:Dell mini 10/mini 10 v compatible with mobile broadband?

9 more replies
Answer Match 40.32%

The last camera App that included the panorama mode, creates unnaturally saturated fluorescent blue skies and overly yellowish sunny parts of the photo. Sand gets yellow, Sunsets too orange.
The previous was ok in colour rendering.
I have the official anniversary win10 and 1053 firmware.
How can I get rid of the "faulty" version of camera app?

More replies
Answer Match 40.32%

Hii got new Lenovo G510 last week windows 8 64bit operating system core i3In its specs it se clearly shown that it have 720 p hd camera but when i opened the camera app from start menu it only shows 0.1MP (4:3) and 0.3 (4:3) option and result is so dark and laggy  I checked the driver in device manger it shows properly installed by this name 'Lenovo Easy Camera" driver details are Microsoft driver version 6.2.9200.16664 i tried to update it from internet but it says its updated i tried manually install the driver from here " C:\drivers\Camera Driver (AVC, Liteon, Bison, Chicony)" but Warning message pops up  " NO APPROPRIATE DRIVER TO B INSTALLED" Then i tried to install it from her C:\drivers\Camera Driver (AVC, Liteon, Bison, Chicony)\HD\Bison\3.13.301.1 but setup gets "failed" at the end and says "please plugin the device and restart the setup" PLEASE HELP ME PLEASE

A:Lenovo G510 Camera Dark Poor camera Result Issue

I bought g510 week ago and the camera is terrible black, and blur i tried many drivers many ways but nothing succed... how to fix it!

9 more replies
Answer Match 40.32%

you know when you plug your camera into your computer it brings up the picture transfer wizard. well my computer no longer does that and its kind of annoying. anyone know how to reactivate autoplay i guess? ive tried different usb ports and i even uninstalled usb root hubs and rebooted and let them reinstall themselves
 

A:Camera Wizard Autoplay no longer shows up when plugging in camera

http://www.microsoft.com/downloads/...b6-e8fa-45c4-a171-1b389cfacdad&DisplayLang=en
 

1 more replies
Answer Match 40.32%

(Edit - Subject should read 'Microsoft Camera Wizard does not work anymore with Canon digital camera')

I have a Canon SD 700 IS digital camera bought about 15 months ago. Until recently, I could connect it to the USB port (same one each time and that port is not used for anything else) of my Windows XP PC (1 year old, bought new) and the Microsoft Scanner and Camera Wizard would appear allowing me to use that software to transfer my digital pictures to my PC. Now, that does not work. I tried reinstalling the Canon EOS utility that came on a CD with my camera - no success in getting pictures transferred with that. The only way I can get the pictures to transfer, is to open Windows Explorer, the camera shows up under My Computer, but if I right click on Get pictures highlighting the camera listing, after multiple trys and 30 minutes, I get the few dozen pictures to transfer.

Anyone know what to try? I am suspecting it has to do with a recent overhall of my PC anti-spyware and security software (details below) as was using Lavasoft and Spybot before and found them becoming less effective. My computer is anti-malware free as far as I know from anti-spyware scans with multiple products (at least twice weekly) and real-time protection and anti-virus scans a little less frequently which Zone Alarm has never from day one found any viruses.

The computer is recognizing the camera in the USB port (it is enabled) and camera powered on and has no issues when taking pictures.... Read more

A:Microsoft Camera Wizard does not work anyone with Canon digital camera

8 more replies
Answer Match 40.32%

Got a new Canon camera which uses its own program to download pictures to the computer (Gateway MX6930) running XP (sp3) and have had no problems. Tried to download some pics from my older Sony camera which used to bring up the Camera Wizard allowing me to title each shot with a name and number but that no longer happens. I plug in the Sony (USB cable) and nothing. It shows up on Explore and right clicking does not get me to the Scanner and Wizzard start-up screen that would allow me to select the photos I want and to name them as they are put on the hard drive. When I search through Scanners & Cameras and click on "Add an imaging device" the "Scanner & Camera Installation Wizzard" starts but Sony is not listed so I cannot select it. I can click on "Have Disk" but the CD that came with the Sony does not have the file it needs. The only thing on the CD (besides photo programs) is a USB driver which I did download but didn't help...... HOWEVER I have had MS Word refuse to start a week or so ago and I tried reinstalling but didn't work, I found an MS site that showed me how to repair the Word registry and that worked OK. This makes me suspect - maybe something has happened to the registry. I can't go there so I decided to ask for your help.... Any suggestions? Thanks in advance...
 

A:Cannot find MS Scanner & Camera Wizard to download photos from camera

Either camera should show up in "My Computer" when connected via USB ...
Where you can explore the files and copy>paste (drag>drop) them to a folder in your computer.
Can you get your pics this way ????
 

2 more replies
Answer Match 39.9%

I have a digital camera with Window's XP. Originally, when I turned the camera on, it would launch a wizard to transfer the files.

Lately (maybe since I installed SP1), it doesn't recognize the camera as picture files, but as a removable drive. I have changed this setting in the drive properties, but the setting won't stay so something must be overriding it.

I've tried uninstalling and reinstalling the camera, but the same thing happens.

A new program called "safely remove hardware" might possibly be involved, but I can't find any settings there to change that might impact this. I'm not sure where this came from unless it was part of SP1.

Any help out there?
 

A:XP recognizes camera as removeable disk drive not a camera

6 more replies
Answer Match 39.9%

Hi, I'm having trouble with my digital camera software and/or transferring pictures from my camera and dock to pc. I have a Kodak cx7525 digital camera. The software loads normally, but when trying to open the software or trying to transfer pictures to the pc, I get an error message that states a .dll file is missing. The dll file is LOCACQMOD.DLL. I contacted kodak and they sent me new software but that didn't help, still get the same error message. The camera works fine but cannot get the software and camera to work on pc. I have searched for the dll file but cannot find it and have no idea what it is or what it does. I'm guessing something is missing from the pc instead of the camera software. Any help is greatly appreciated. I have family photos stored on it that I would love to be able to save them and not lose them. Again, thanx for any help I can get. You guys and gals are the best.
 

A:Cannot get digital camera software to run and pictures will not transfer from camera

11 more replies
Answer Match 39.9%

I have a Kodak SD camera card that my Sony A230 stopped detecting when inserted. I have been using this card for a year with no problems till today. I can plug it in a card reader in any of my computers and remove or send photos to it so I don't think it is a contact issue. I was using the camera today when the battery became exhausted and it shut off during a shoot. Since then the camera won't detect it. What could the problem be?
 

A:Camera Card Not Detected in Sony A230 Camera

Just a wild guess at this point ... Might need to have the camera reformat the card
 

2 more replies
Answer Match 39.9%
Answer Match 39.9%

I updated to the latest drivers for Intel AVStream Camera on my tablet / laptop. After the update, only the front camera works now.

Hope someone can help solve this problem.

Thanks,

Vic

A:Front camera working but main (rear) camera is not

Can anyone help me?
I've tried updating my camera drivers in device manager, uninstalling the camera and booting windows 10 again...to no avail. Still no main camera....only the front camera works.
Does the rear camera need seperate drivers? How do I check this?

Thanks again.

0 more replies
Answer Match 39.9%

my bullt in video camera on my samsung computer stopped working...it says" connect camera"...how do i so this...thanks ron

A:my video camera stopped working,its says connect camera

Try re-installing the webcam driver for your laptop model from Samsung's website.If that doesn't fix the problem. the webcam may be turned off. Look for a combo key (Fn key) which toggles the webcam on and off.message edited by phil22

6 more replies
Answer Match 39.9%

Just downloaded Windows 10 and with I put my memory stick into my computer I get the following error message:
E:/ the directory name is invalid.

Can someone assist me?
T

A:Viewing camera pictures from the camera memory stick

We're going to need a lot more detail than that. What are you trying to do when you get the error message?

1 more replies
Answer Match 39.9%

I have an iMac ALU 8,1 from 2007
20 Inch, 2.66 Ghz, 2 GB ram, ATI HD 2600 XT, 640 GB Sata 7200 rpm

And my problem is that I am about to buy a cable to connect a secondary monitor, and I do not know wich one I need.
I don't know wich port I have and I can't really tell the difference.
I searched the net a bit but couldn't seem to find this info.

I looked at the tech specs of the new iMacs on apple.com and they have Mini DisplayPort, but that's the new revision.
What about mine and how do I tell the difference?

Also, where can I get theese kind of cables really cheap? b/c it's freakin expensive from apple.
 

A:Solved: Mini DVI and Mini DisplayPort ????

8 more replies
Answer Match 39.48%

Opera Browser customer service number, +1-844-331-5444  Opera Browser customer service Opera Browser customer care telephone number +1-844-331-5444 Opera Browser customer care telephone +1-844-331-5444  Opera Browser customer care phone number  +1-844-331-5444 Opera Browser customer care phone Opera Browser customer care number  +1-844-331-5444 Opera Browser customer care opera technical support telephone number opera +1-844-331-5444 technical support phone number opera technical support phone opera +1-844-331-5444 technical support number opera technical support +1-844-331-5444  helpline number opera technical support +1-844-331-5444  opera technical problems helpline telephone number opera technical problems helpline telephone opera technical problems +1-844-331-5444  helpline phone number +1-844-331-5444  opera technical problems helpline phone opera technical problems helpline number +1-844-331-5444  opera technical issues helpline telephone number +1-844-331-5444  opera technical issues helpline telephone opera technical issues helpline phone number +1-844-331-5444 opera technical issues helpline phone opera technical issues helpline +1-844-331-5444  number opera tech support telephone +1-844-331-5444 number opera tech support telephone opera tech support phone number opera tech support phone +1-844-331-5444 opera tech support number opera tech support helpline telephone number opera tech support helpline +1-844-331-... Read more

More replies
Answer Match 39.06%

Hi,
My build in web camera is not working. I have windows 8.1 OS install on my computer. When i launch the camera app, the screen is black, Im able to take a picture but when i click the previous arrow to see my picture, it say " The file cant be open, the file may be damaged".

A:Build in camera not working in Windows 8.1 camera app

Hi, and welcome to TSF, we need more info than that. What is the make and model number of your computer, have you checked in device manager for any error flags, either a yellow ! or red X, have you tried reinstalling the web cam software or driver.

1 more replies
Answer Match 39.06%

Hi,

I recently purchased a digital camera for ordinary use with my pc. Everything seemed great until it was time to connect the camera to the pc - directions: "connect the USB end to any USB port on your pc" I have a reason to believe I don't have a USB port.

I know I must clarify that my computer is extremely outdated by today's standards. It has Windows 95 and is about 5 years old.

My main problem:
I have a digital camera with no way of transmitting my pictures to my pc for viewing and sharing.

I did some research. Along with my camera I have a 32 MB memory card. I went to the site prescribed by my digital camera manual and I found this:

http://www.dcprodirect.com/new/inde...hotosmart+318&searching=&searchfor=&AccId=525

By chance, would I be able to put the memory card with my pictures on it into this card reader and would it work? It says it is compatible with Windows 95.

The type of dig. camera I have is an HP Photosmart 318.

I am extremely grateful for any tips or help anyone has to offer. Thanks a million!
 

A:Digital Camera/Camera Software Expert, Anyone?

6 more replies
Answer Match 39.06%

hi
i have my Hp mini Laptop that has a build in camera everything was working fine in the Camera app until today i was recording a video and then the image was kind freezing and some option were at the bottom and i press "change camera" nothing happend so i shut down my computer and turn it back on and now it saids Connect a camera i need your help to fix this problem??
 

A:HELP Camera problem "connect a camera???

more information about my pc is a hp mini 110-3510nr what driver do i have to install for my build in camera?? i know there at the hp.com but i dont know witch one to install ???
 

1 more replies
Answer Match 39.06%

I'm sorry if this has been addressed before; I'm getting increasingly frustrated so I'm more than likely to miss it if I scroll back through the threads.

Okay.

I have an Olympus X-760 camera, and the software that came with it is Olympus Master Version 1.4. I've had to reinstall Olympus Master because my main computer died.

My main computer has been stupid recently, so I decided to install Olympus Master onto my laptop (which has Windows Vista). The installation went fine, so I plugged in my camera, clicked 'PC' on the camera's screen and went to 'Transfer Images' on Olympus Master. I ended up with the following message:

"The software is unable to find an Olympus digital camera connected to a USB port on your computer,"

...So, I've tried every USB port on my laptop and I've even unplugged and plugged back in the part of the cable that plugs into the camera itself but I keep getting that message. My laptop itself realises something's been plugged in, as it brings up 'Autoplay' - I've clicked on 'Open folder to view files' and it has all my pictures in that folder apart from the photos I've taken at an event this weekend. ...And because it's those photos I want this whole thing is making me incredibily annoyed. The photos themselves can be viewed perfectly fine on the camera itself.

Then I decided to see if my main computer would be anymore helpful, but I get exactly ... Read more

A:My camera's software can't find the plugged-in camera

6 more replies
Answer Match 39.06%

Morning All, NEXTBOOK NXW10QC32G, ATTOM 1.33 QUAD, 2GIG
Been fighting this issue for a while now. In win8.1 the Win camera app can switch between front and rear looking cameras. In upgrade to win10 anniv just the front facing camera is available with no option to change. Is this a fault in win10 seen in other laptops Win8 app to a win10 laptop?
Thanks
Jack KG6INX

A:Loss of Rear Camera in Win10 Camera App

Completely restart the tablet from scratch by clicking restart from the power icon or hold down shift key when you click shutdown.

After the tablet does a complete restart from scratch, does the rear camera option work? There are a couple of fixes I have tried and one thing I discovered is that both cameras will not work after a hybrid shutdown (the shutdown you normally get if you have fast startup enabled in Windows 10). On my table they do both work only after a startup from scratch (restart, shift + shutdown, or fast startup in Windows 10 disabled).

0 more replies
Answer Match 37.8%

Hi All,

I have a Dell laptop running Windows 8.1 and my camera app recently stopped working. When I open the app a message comes up saying




We can?t get to the camera roll right now
Something went wrong while accessing the camera roll.



I assume that the default save location for photos and videos is my pictures library but there is definitely a folder there called ?Camera Roll? so what is the problem? Also, is there any way that I can get the photos to save to SkyDrive?

Any help would be appreciated
Thanks,

William Dry.

A:Camera app can't find Camera Roll

Hi William.

William. try this.
Open file explorernavigate to the folder "Camera Roll"right click on itselect include in libraryspecify pictures

This will at least show your folder "Camera Roll" in the Metro Pictures library (I hope enable them to be saved in cloud)
After that I don't know (re your application) Is there an options/settings in the app that you can specify where the folder is?

Let us know how you go.

6 more replies
Answer Match 37.8%

I have a digial camera software installed on my computer and have no problems manipulating software, drive, camera pictures, transferring, printing etc.
However, I recently installed a SONY video camera software on the same computer and have no problems transferring from video camera to computer, but cannot print or transfer videos to DVDs, the error is 'CANNOT FIND DRIVE E" and there are no other drives to choose from.
Should I stick with the computer transfer or should I purchase some other product to transfer videos?
HELP! My video camera is full and I don't want to delete anything!
 

A:Digitial camera/video camera

Once you get it on the computer you can do anything you like with the videos. Download them to the computer to free up the card. You can then make a DVD or whatever you want to do with the videos.

Even if you could transfer directly to DVD you would have to check the DVD carefully before dumping the files from the card. The computer as an intermediate step is the safest way to do it.

If the videos are important to you at all I wouldn’t trust them to a single source like a DVD.
 

2 more replies
Answer Match 37.8%

I bought a new AZ3-600 AIO running WIndows 8.1 and noticed a couple new "features" I hadn't seen before that I'd like to get rid of.  The first is a text icon reading "camera on" whenever the camera turns on, and likewise, "camera off" whent it turns off.  Is there a way I can disable this?  It's distracting, and I already have the light  near the camera to tell me when it's on or off. Thanks for any tips on how to do this! -Brad

A:Disable the "camera on" and "camera off" message

I'm not exactly sure what may be causing that. It could be a program called Acer Quick Access that allows you to manage hardware and software components. Try going to the start screen and typing "quick access" and launch the quick access program if it is present. See if there is an option in that program to enable or disable the camera notifications.




Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.

2 more replies
Answer Match 37.8%

...why for my digital it is telling me Camera not connected when it worked fine before I tried to get my new Veo Web Camera to work.

I just bought and ran the software to install my Veo Web Camera, but it's not working. In my device manager it is listed under imaging devices and under USB Controllers the things that are supposed to be there are too...I've uninstalled and reinstalled and still nothing...anyone have any idea what's going on?? I'm getting so aggrivated! I know my computer is a piece of you know what, but this camera should work dang it!
 

A:Web Camera, Digital Camera Question about...

Just wanted to post that I downloaded the directx drivers from the Microsoft website and it worked.

Still says "camera not connected" for my digital? Any ideas!
 

1 more replies
Answer Match 37.8%

I bought a new AZ3-600 AIO running WIndows 8.1 and noticed a couple new "features" I hadn't seen before that I'd like to get rid of.  The first is a text icon reading "camera on" whenever the camera turns on, and likewise, "camera off" whent it turns off.  Is there a way I can disable this?  It's distracting, and I already have the light  near the camera to tell me when it's on or off. Thanks for any tips on how to do this! -Brad

A:Disable the "camera on" and "camera off" message

I'm not exactly sure what may be causing that. It could be a program called Acer Quick Access that allows you to manage hardware and software components. Try going to the start screen and typing "quick access" and launch the quick access program if it is present. See if there is an option in that program to enable or disable the camera notifications.



Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.

2 more replies
Answer Match 36.96%

I need help. up to about several week ago I was always been able to download my photos from my cameras removable disk into the portal of my computer. Now it won't

More replies