Tech Problem Aggregator

Windows Server 2003 - Event ID 1030 Source Userenv

Q: Windows Server 2003 - Event ID 1030 Source Userenv

Hi,

Application event viewer notification keep showing this error. Kindly advise.

Event ID: 1030
Source : Userenv
User NT Authority\System
Decription: Windows cannot query for the list of group policy object. Check the event log for possible messages previously logged by the policy engine tha tdescribes the reason fo this

Event ID: 1030
Source : Userenv
User NT Authority\System
Description: Windows cannot access the file gpt.ini for GPO CN=(31B2F340-016D-11D2-945f-00c04FB84F9,CN=Policies,CN=System,DC=mscmsia,DC=com. hte file must be present at the location <\\mscmsia.com\sysvol\mscmsia.com\Policies\{31BF340-016D2-945F-00C04FB984F9}\gpt.ini>.(Access is denied). Grpoup Policy processing aborted.


Thank you.

More replies
Answer Match 103.5%

Hi!!

I get an error message on 2 machines in my domain.

domain: 3 windows 2003 servers.
1 server: DC
2/3 servers: on this I get the error. the both servers are set as member servers.
how I can fix the error on the both machines?

Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1030
Date: 22.09.2003
Time: 10:13:48
User: GICIOLAND\gicio
Computer: JAMESBROWN
Description:
Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

regards,
gicio
 

More replies
Answer Match 106.26%

Hi,

Recently i have this 3 below event notification error when i view on my event manager windows server 2003. Kindly advise. Thanks.

Event ID: 104
Source: Dimaint
Description : Lost Layer 1 framing on line 2 of Adapter 1 (Check cable or NT)

Event ID: 104
Source: Dimaint
Description : Lost Layer 1 framing on line 3 of Adapter 1 (Check cable or NT)

Event ID: 104
Source: Dimaint
Description : Lost Layer 1 framing on line 4 of Adapter 1 (Check cable or NT)
 

More replies
Answer Match 100.8%

Hi All,

urgent help require. recently i am facing big issue that my server auto restart itself. When i check the Event show as below:

Event ID:1005
Source: Save Dump
Description: unable to produce minidump file from the full dump file

Event ID: 1001
Source: 1001
Source: Save Dump
Description: the computer has rebooted from a bugcheck. The bugcheck was 0x00000027 (0xb550d76c, 0xb550d468, 0xb550d468, 0x8846165e). A dump was saved in C:windows\memory.dmp

Please advise and hope able to provide me a better solution to avoid my server restart itself again.

Thank You.
 

A:Windows Server 2003 auto restart - Event ID 1005 / 1001 (Source Save Dump)

Without seeing the minidumps this is your error per auhma.org:

0x00000027: RDR_FILE_SYSTEM
This is a rare and fairly obscure error condition. Memory management issues can be one cause, and adding additional RAM commonly will resolve this version of the problem.
 

10 more replies
Answer Match 89.46%

First up, hello everyone.

I have XP computers connected to a SBS2003R2 domain that is posting 1030 Userenv errors in the eventlog. I've not checked them all but three of them definitely are, so we can presume they all are.

Through Userenv.log, I've wiggled it down to two variants of:

USERENV(314.480) 21:50:37:892 ProcessGPO: CheckFilterAcess failed for <CN={C94DA5DA-A892-44ED-B77D-618A143ED5CC},CN=Policies,CN=System,DC=[domainname],DC=local>. Filter not found
Click to expand...

Followed by many of the following that correlate with the eventlog errors:

USERENV(318.868) 09:47:24:929 ProcessGPOs: GetGPOInfo failed.
Click to expand...

My question is - whereto from here? OUs, GPO and the such is on the edge of my knowledge. It seems that if I can find what GPO is failing, I'm there.
 

A:Eventlog 1030 and userenv GetGPOInfo failed

I would suggest since you are apparently having troubles with a Small Business Server that you ask to have this post moved to the Networking forum here at TSG. You will get a better response there. You can do this by clicking the little triangle at the top right corner of the window and ask a moderator to please move this thread to that forum
 

2 more replies
Answer Match 78.96%

A custom is receiving a ton of these errors in their System Event Log. After rebooting, everything seems fine for about half an hour, and then there are hundreds of these. It's a brand new server, but I tested the RAM and hard drive anyway. Everything comes up fine. Any ideas?
Event Type: Error
Event Source: Application Popup
Event Category: None
Event ID: 333
Date: 1/11/2007
Time: 2:44:53 PM
User: N/A
Computer: SERVER1
Description:
An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 01 00 6c 00 ......l.
0008: 00 00 00 00 4d 01 00 c0 ....M..À
0010: 00 00 00 00 4d 01 00 c0 ....M..À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
 

A:Event ID 333 on Windows Server 2003

14 more replies
Answer Match 78.96%

In the Security log of our Windows Server 2003 I have nearly 100 of the following errors:

Logon Failure:
Reason: An error occurred during logon
User Name:
Domain:
Logon Type: 3
Logon Process: Authz
Authentication Package: Kerberos
Workstation Name: SCPSTORAGE
Status code: 0xC000040A
Substatus code: 0x0
Caller User Name: SCPSTORAGE$
Caller Domain: SCP
Caller Logon ID: (0x0,0x3E7)
Caller Process ID: 1324
Transited Services: -
Source Network Address: -
Source Port: -

We are running 7 servers, 5 Windows Server 2000 (one of which is the DC) and 2 Windows Server 2003 (the one generating these errors is a file server). I have no complaints of users not being able to log in and this does not seem to be causing any network problems, but I am curious how I can resolve this issue so that this does not fill up my event logs. If anyone can help, this would be great appreciated.
 

A:Windows Server 2003 Event ID 537

http://eventid.net/display.asp?eventid=537&eventno=194&source=Security&phase=1

I saw a couple of cases refering to date or time on a client being off as compared to the server.
 

2 more replies
Answer Match 76.44%

In the absence of anyone who knows what they are doing, yours truely is trying to overcome a problem with seemingly random restarts on my server PC. Sometimes the server restarts at 12.00 midday but also at other times.
The problem started on 22 Sept, a few hours after the installation of an upgrade to the "Symantec Client Security" small business pack ver 3.0 (this contains 10 license of Symantec Antivisus 9.0.0.338 plus 1 copy of Semantic Service Center v 6.0). This made me very suspicious of the upgrade and I have had since had exhaustive support from them up to the point of them exhausting all the possible problems and pointing me back to Microsoft.
So far I have been in contact with Symantec and Dell (the server PC) and done everything they have advised - all to no effect. Breifly, the list of tasks performed is as follows:-
1) Remove and Reinstall all Symantec software.
2) Update virus definition files & run anti virus scan on the whole PC from safe mode (no viruses found).
3) Change the timing of the AV automatic updates from daily to weekly (Now happens on Sunday).
4) Download and run the Dell 32-bit Diagnostic utility V5061 - all tests pass OK (this includes the memory test, which I see in several other threads, by the way).
5) Install microsoft exchange server SP1 (as advised by Microsoft article 837444). This needed the hotfix 831464. Also installed SP2, which needed the removal of Exchange intelligent message filter program.
6) Downloaded a... Read more

A:Event ID 1003 on Windows Server 2003 - repeated restarts

Hello and welcome to Techspot.

Ah Symantec strikes again.

Both your minidumps crash at SYMEVENT.SYS. This is the Symantec Event Library.

This is a known issue on some systems/configurations.

Contact Symantec for more info.

If you can`t fix this problem, maybe you should try a different security product.

Regards Howard :wave: :wave:
 

6 more replies
Answer Match 74.34%

I received a windows network error and went into events log and it has a warning on it. How do I resolve? do I need to assign a task to it or somehow delete. There are several events with warning from source Microsoft windows kernel processor power. Please
help.

More replies
Answer Match 73.5%

The exact details are Log Name:      Application
Source:        SideBySide
Date:          9/23/2015 1:28:53 PM
Event ID:      80
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Angela-PC
Description:
Activation context generation failed for "C:\Program Files (x86)\Slingplayer Desktop\Slingplayer Desktop.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component
version already active. Conflicting components are:. Component 1: C:\windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_fa3b1e3d17594757.manifest. Component 2: C:\windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_41e855142bd5705d.manifest.

if someone can help with this error in my event log i would be so grateful.

More replies
Answer Match 73.5%

received three error codes in a row with the following error message:Windows Operating System; Version: 6.1.7600.16385; Event ID: 11; Event Source: Disk, what do i do i need help please.........
HP,WINDOWS 7 HOME PREMIUM
 

A:Windows Operating System; Version: 6.1.7600.16385; Event ID: 11; Event Source: Disk

11 more replies
Answer Match 73.5%

Every 5 minutes I get this error message popping up under event viewer on a Windows 2003 Small Business Server (all updates etc):

Event ID: 1054

Windows cannot obtain the domain controller name for your computer network. (An unexpected network error occurred. ). Group Policy processing aborted.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.​
I have done the MS Support site "recommendations", but the Server is pointing to itself for the DNS and the IP address and all that are fine. Not sure why or what is going on here. I can't seem to stop it.
 

A:Server 2003: (Event Viewer) error every 5 minutes RE: DNS Server

10 more replies
Answer Match 73.5%

no info comes up with diagnosis/analysis for this URGENT item in Event Log...was directed to you for further assistance.      Add'l/same problem w/Event ID 100. Please advise ASAP?  Tnx, Karen

 

More replies
Answer Match 73.08%

Hello,
In my Event Viewer - Source: Userenv
- User: NT Authrity\System
- Event ID: 1085
Description:
"The Group Policy client-side extension Internet Explorer Zonemapping failed to execute. Please look for any errors reported earlier by that extension"
Please advice how to fix this error.
Tryied with "gpupdate" -same error appear again..
Following MS tutorials try to re-register listed dll. files- by regsvr 32- all dll files re-registered successfully ,except one "Appmgmts.dll"
When try to re-register received this message:
"Appmgmts.dll was loaded but the DllRegister Server antry point was not found.
This file can not be registered"
My PC is Workgroup , stand alone machine. Win XP SP2 with IE7, FAT 32, x86A/m error appears after each reboot , and and sometime is repeated in Event Viewer without reboot (in same session )
This error apears in Applications.
I have all Windows Updates installed.
Please help me to fix this inconvinient
 

A:Userenv Event error ID: 1085

7 more replies
Answer Match 69.72%

Hi, I hope someone out there can shed a little light on this situation as it's doing my nut in!

We have a network with 3 Windows 2003 servers and workstations all with XP. When the users log in a script runs which maps network drives and pushes printer connections etc. Also we have several group policies set which restrict pupils and staff in certain ways. Nothing drastic though. Just 'Cant see certain Control Pannel Items etc'.

Now all was working perfectly until a couple of weeks ago 2 staff members came to me and said "I can't get on the interenet or e-mail". I had a look and when they logged in on their normal computer it seemed to log in fine but then receieved a couple of "Cannot perform this action due to restrictions on effect on this computer" messages. This message also appears when they try to click on the Internet for example. On closer inspection it has run the scripts ok because I have the shared drives and printers. But the virus scanner which is sophos in our case hasn't loaded (it comes down from the server), also there is no All Programs in the start menu, or shut down.

If I log off and check the event viewer I have event 1030 there which refers to an error with group policy.

Now the most annoying problem is it appears completly random with it's timing. Usually a shut down and restart of the computer fixes it. Moving to another computer can also fix it. It dosent always do it on the same computers, other peolpe can log on to ... Read more

More replies
Answer Match 69.72%

Hi, I hope someone out there can shed a little light on this situation as it's doing my nut in!

We have a network with 3 Windows 2003 servers and workstations all with XP. When the users log in a script runs which maps network drives and pushes printer connections etc. Also we have several group policies set which restrict pupils and staff in certain ways. Nothing drastic though. Just 'Cant see certain Control Pannel Items etc'.

Now all was working perfectly until a couple of weeks ago 2 staff members came to me and said "I can't get on the interenet or e-mail". I had a look and when they logged in on their normal computer it seemed to log in fine but then receieved a couple of "Cannot perform this action due to restrictions on effect on this computer" messages. This message also appears when they try to click on the Internet for example. On closer inspection it has run the scripts ok because I have the shared drives and printers. But the virus scanner which is sophos in our case hasn't loaded (it comes down from the server), also there is no All Programs in the start menu, or shut down.

If I log off and check the event viewer I have event 1030 there which refers to an error with group policy.

Now the most annoying problem is it appears completly random with it's timing. Usually a shut down and restart of the computer fixes it. Moving to another computer can also fix it. It dosent always do it on the same computers, other... Read more

More replies
Answer Match 68.88%

These event just started appearing a day or two ago, but they continue to repeat every 5 minutes:

Event 1030:
Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Event 1058:
Windows cannot access the file gpt.ini for GPO CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=bbpi-pdc,DC=billsblue,DC=com. The file must be present at the location <\\bbpi-pdc.billsblue.com\sysvol\bbpi-pdc.billsblue.com\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini>. (Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator. ). Group Policy processing aborted.
They occur exactly every five minutes, and always in this order. I searched for the gpt.ini file it's looking for and found it.

I don't really have any group policies in place, just basic users and computers. Nothing fancy. And I'm afraid I don't quite understand AD enough to just 'experiment' until I make these error go away.

Any ideas and/or guidance would be welcome.... thanks
 

A:Event 1030 & 1058, repeating. Guidance?

One possibility:
As per Microsoft: "This behavior may occur if the following conditions are true: your Windows XP-based computer is a member of a domain, and the Microsoft Distributed File System (DFS) client is turned off (disabled). To resolve this issue, turn on (enable) the DFS client". See M314494 to find out how to do this. Also check M810907 for a hotfix.

Other possibilities:
http://www.eventid.net/display.asp?eventid=1030&eventno=1542&source=Userenv&phase=1
 

3 more replies
Answer Match 68.88%

I recently posted this : http://forums.techguy.org/networking/606462-ads-monitoring.html

It was very understandable, and since then I am now logging any changes made in Active Directory by the "Domain Admins" group.

The only problem I have is that I see all the logs are logged and reside in the Admin Tools>Event Viewer>Secuirty Log.

This log contains ALOT of logs from user access to the domain controller and other network variables.

Is there ANY WAY to make the logging of the "Domain Admins" group for ADS appear in its own "area" or "log" so to speak. This way I dont have to filter through all this stuff in order just to see who and what is going on in ADS?
Thanks
 

A:Event Viewer on Server 2003, Question.

Off the top of my head I do not know how. But you can use the filter in view as you already know. Might be a little clunky but it works.
 

1 more replies
Answer Match 68.88%

I have a server running Windows2003 SP2 server. Every 3 or 4 days I get an Event 1003 in the system part of the evnet viewer. Error code 00000050, parameter1 efefefef, parameter2 00000001, parameter3 f7609f5e, parameter4 00000002.
It also creates a mini dump file every time this happens. I checked the folder C:\Windows\Minidump and it loks like it been creating 6 to 8 dump files a month from this same issue. I donloaded Windebug to tyr and read the minidump files but it keeps telling me my sybol path is not correct an it wont debug the dump file.
Can anyone help me with this!?
 

More replies
Answer Match 68.88%

Server 2003 has a Shutdown Event Tracker that requires that you "best describe why you want to shutdown the computer". It is on by default, but can be turned off using Group Policy.

Wonderful!

Somewhere along the way, one (and only one) of my XP machines (SP2 + all updates) acquired that same "feature". The Group Policy trick mentioned above has no relevance in XP, so I can't stop this event tracker that way.

Among other things, it makes a remote shutdown impossible (unless I use an RPC terminal). Besides, it's a pain to have to type in a reason (usually "Windows F%#*ed up again") when all I want to do is to shutdown or reboot.

If it runs as a service, I can't find it in either "Services and Applications" or in "Sysinternals Process Explorer"

And another thing!!! I can't find the logged events in the Event Viewer for Application, Security, or System.

If I could find it, I'd drive a stake through its heart. How do I kill the beast?

To prove that I've taken my meds today, here's a screen dump:

Askme nicely and I might explain how I got a screen dump of an XP computer part way into shutdown.

Thanks in advance.
 

A:Shutdown Event Tracking (XP, Not Server 2003)

Heres a couple of articles:

http://support.microsoft.com/kb/555541/en-us
http://www.tweakxp.com/article37489.aspx
http://searchwinit.techtarget.com/tip/0,289483,sid1_gci943320,00.html?Offer=w2k2
 

3 more replies
Answer Match 68.88%

Hello

We have a Server 2003, logged on as administrator account or administrator privilege, Event Viewer allows Save then Clear, but not Clear and save.
From the server,
Event Viewer
Select Application
Clear All Events
Do you want to save ?Application? before clearing?
Yes
Save ?Application? As
Message ?Clearing the event log failed because of the following error:? Access is denied
From the server,
Event Viewer
Select Application
Save log file as
Save
Then Clear, No problem

Any ideas what would cause this? Worked for years Event Viewer Clear, then Save As, but now only save first, then clear

Thanks

B.
 

More replies
Answer Match 68.88%

I recently upgraded and migrated our mailboxes from an Exchange 5.5 server to an Exchange 2003 server. I am getting errors in the application log of the new server that I cannot seem to resolve. If anyone has any suggestions, I would greatly appreciate it.

Source: MSExchangeSA
Event ID: 9188

Description:
Microsoft Exchange System Attendant failed to read the membership of group 'cn=Exchange Domain Servers,cn=Users,dc=scp,dc=net'. Error code '80072030'.

Please check whether the local computer is a member of the group. If it is not, stop all the Microsoft Exchange services, add the local computer into the group manually and restart all the services.

Thanks,
Wayne
 

A:Exchange Server 2003 - Event ID 9188

This site is awesome for Exchange info: http://computerperformance.co.uk/Logon/code/code_80072030.htm
 

1 more replies
Answer Match 68.46%

I am running a Vista x 64 client with a SBS2003 server. There are now real critical issues, but there are some logon and logoff anomalies.

I consistently receive events 1030 and 40961 at Logon. I will post details in subsequent entries.

Also, Logoff usually takes a very long time (like more than 15 minutes).

A:Event ID 1030 and 40961 at Logon, Slow Logoff

Example event 40961:

The Security System could not establish a secured connection with the server LDAP/sbsserv.Dimond.local/[email protected] No authentication protocol was available.

- System

- Provider

[ Name] LsaSrv

- EventID 40961

[ Qualifiers] 32768

Level 3

Task 3

Keywords 0x80000000000000

- TimeCreated

[ SystemTime] 2010-10-27T23:19:24.000Z

EventRecordID 156192

Channel System

Computer IPS-091.Dimond.local

Security


- EventData

LDAP/sbsserv.Dimond.local/[email protected]
03030980

3 more replies
Answer Match 66.78%

Hi,

I have a set of 5 machines - 2 desktops (one being a thin client and the other to function as a 'server' ) and 3 notebooks. I was wondering what was the difference b/w the 2 versions Windows Server 2003 and Windows Small Business Server 2003. Is it true one cannot use a thin client but need a regular cpu setup to use Small Business Server 2003 ?

There is a difference in costs and since i have windows 2000 on the desktops and xp on the notebooks wondered if i needed to shell out so much more $$ for the Windows Server 2003 . I plan to put in a wireless networking system to link all the 5 machines.

Thanks in advance for any and all advise.

S
 

A:Solved: Difference b/w Windows Server 2003 and Small Business Server 2003

ok i got the answer to this from another source.
 

1 more replies
Answer Match 66.78%

Hi,

I have a set of 5 machines - 2 desktops (one being a thin client and the other to function as a 'server' ) and 3 notebooks. I was wondering what was the difference b/w the 2 versions Windows Server 2003 and Windows Small Business Server 2003. Is it true one cannot use a thin client but need a regular cpu setup to use Small Business Server 2003 ?

There is a difference in costs and since i have windows 2000 on the desktops and xp on the notebooks wondered if i needed to shell out so much more $$ for the Windows Server 2003 . I plan to put in a wireless networking system to link all the 5 machines.

Thanks in advance for any and all advise.

S
 

A:Solved: Difference b/w Windows Server 2003 and Small Business Server 2003

Windows Server 2003 for Small Business Server has the following restrictions:
- Only one computer in a domain can be running Windows Server 2003 for Small Business Server.
- Windows Server 2003 for Small Business Server must be the root of the Active Directory® forest.
- Windows Server 2003 for Small Business Server cannot trust any other domains.
- A Windows Server 2003 for Small Business Server domain cannot have any child domains.
- Each additional server must have a Windows Small Business Server 2003 client access license (CAL). You can use CALs for each user or for each device.
The standard edition of Windows Small Business Server 2003 includes Windows Server 2003 technologies, including fax service, firewall service, and remote-access service. Additionally, it includes Microsoft Exchange Server 2003, enhanced tools for server monitoring and administration, and an out-of-the-box solution for internal Web sites. The standard edition is ideal for customers who do not require the higher-level functionality included in the premium edition

The premium edition includes everything in the standard edition, plus Microsoft SQL Server 2000, Microsoft Internet Security and Acceleration (ISA) Server 2000, and Microsoft FrontPage® 2003. The premium edition is ideal for small businesses with more demanding IT needs, such as data-intensive line-of-business applications, or advanced firewall and Web-caching capabilities

The standard edition has most of the stuffs inside.
 

2 more replies
Answer Match 66.78%

Thanks for any help.

Event Type: Warning
Event Source: WinMgmt
Event Category: None
Event ID: 5603
Date: 28/11/2006
Time: 17:57:33
User: USER-2F62D3344E\user
Computer: USER-2F62D3344E
Description:
A provider, OffProv11, has been registered in the WMI namespace, Root\MSAPPS11, but did not specify the HostingModel property. This provider will be run using the LocalSystem account. This account is privileged and the provider may cause a security violation if it does not correctly impersonate user requests. Ensure that provider has been reviewed for security behavior and update the HostingModel property of the provider registration to an account with the least privileges possible for the required functionality.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

A:What's this event in event viewer? (event source WinMgmt)

http://support.microsoft.com/default...b;en-us;891642
this might help

1 more replies
Answer Match 65.52%

Description:
Error code 100000d1, parameter1 00000060, parameter2 00000002, parameter3 00000000, parameter4 ba60578c.

For more information, see Help and Support Center at
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 64 100000d
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 36 30 2c 20 000060,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 62 61 36 30 00, ba60
0050: 35 37 38 63 578c

Some body can help me ?
 

A:Random restarts Source:System Error Event Category: (102) Event is 1003

Inside the 1 MiniDump:




BugCheck 100000D1, {60, 2, 0, ba60578c}
Probably caused by : nvata.sys ( nvata+1378c )Click to expand...

Uninstall the nvidia drivers from the control panel
Download and install the latest drivers
 

2 more replies
Answer Match 65.52%

duct: .NET Framework; Version: 2.0.50727.8670; Event ID: 0;
Event Source: TOASTER.EXE;


 

More replies
Answer Match 65.1%

EDIT: ARGH, sorry, meant to post this in General Discussion forum, I have no idea if it is a network issue.

Hello everyone,

I keep seeing this error appear several times a day, even during idle, in my Event Viewer. I did a clean install of build 10586 less than a month ago. I'm not having any overt issues yet, but the error is disturbing.

SettingSyncHost (9144) {979B90BD-0F81-4D83-B038-62032DD17C47}: Database C:\Users\xxxxx\AppData\Local\Microsoft\Windows\SettingSync\metastore\meta.edb: Index deleteDetection of table items is corrupted (0).
I have spent a few hours researching this and I can't find any reports of similar issues or even what the file metastore\meta.edb is for. Is this hopefully one I can just rename and it'll automatically create a new one?

More replies
Answer Match 65.1%

Well, I tryed to manage page-file but unfortunataly it resulted in problems. Then I lost VAIO-CARE and 7 ZIP files too. When I open Event Viewer every single day I see this: event Id 2002, Souce: Eap Host, Log name: Application and number of Eventes: 84. As I am desparate about that, What sould I do? Reinstall VAIO-care or WHAT else? Please help me!!!!! Well, I can say that before of all, I tryed to install vopt, latest version but it was not freeware and I soon had to uninstall it but it was not getting to uninstall from programs and features and then I used register editor to delete the leftovers which desapered from program and features....but I can see several error in event viewr such as Event 11706, MsInstaller >>>> Product Vaio Media Plus -- Error 1706 - An instalation for the product Vaio Media Plus cannot be found. Try the installation again using a valid copy of the instalation package 'VMP VEPMMx64.msi'. So should I reinstall all vaio care or not................!!! By the way I tryed to install vopt in order to align files in hard drive but when I tryed to manage page file it did not work as should have so I lost vaio care..........................................What to do? can you figure out what going on.................!!!

A:Event Viewer Event Id 2002, Source: EapHost, Log Application

Welcome to the forums Marioo!

Have you tried a system restore to a point before these errors started? (Easiest things first) You could also try a sfc/scannow, to find and possibly repair any corrupted system files. We have many fine tutorials here at the forums, written by some very knowledgeable people, heres a link to one if you haven't did this before :

SFC /SCANNOW Command - System File Checker

5 more replies
Answer Match 64.68%

Can anyone help me with this error ? 

More replies
Answer Match 64.68%

A week ago I started getting this warning errors logged three to six times or more per day in Event Viewer.

Event Viewer Warning - Source is e1yexpress - Event ID is 27
Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected.

Every time Event Viewer logs the e1yexpress warning it follows up with this logged warning
Event Viewer Warning - Source is DNS Client Events - Event ID is 1014
Name resolution for the name isatap.home timed out after none of the configured DNS servers responded.

Not every time, but a lot of times Event Viewer also logs this warning right after it logs the isatap.home warning.
Event Viewer Warning - Source is DNS Client Events - Event ID is 1014
Name resolution for the name teredo.ipv6.mocrosoft.com timed out after none of the configured DNS servers responded.

Today I installed updated drivers for my Intel(R) 82567V-2 Gigabit Network Connection, but after 11 hours of no logged error warnings they started up again and I got three sets of the above logged in a 90 minute time frame.

My system is two years old and as far as I know I have never had these errors logged before.

My motherboard is a Asus Rampage III Extreme.

Any ideas on how to get event viewer to stop logging these? A google search really did not offer any real clues on what to try other than updating my Intel(R) 82567V-2 Gigabit Network Connection drivers, which did not solve the problem.

A:Event Viewer Warning - Source e1yexpress - Event ID 27

Well after trying everything google came up with to try, including updating drivers to the latest version, rolling drivers back to the default Win7 version, disabling SIPS and a few others things I decided to call Verizon and see what they had to say. As soon as I told Verizon Tech Support that my error code was "e1yexpress - Event ID is 27
Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected", they told me not our problem take your PC to a shop. I called back a couple of hours later and talked to a different person and this time I only said that I was getting the Event 1014 time out errors. They had me do a few things in a cmd prompt and then said we do not know, but we can send you a router, I said fine, I will try the router.

Well it has been over a week since installing the new router and no error codes at all so it was the router!

2 more replies
Answer Match 64.26%

I've been investigating an "applications" eventlog error occurring since upgrading to XP SP2 and would appreciate anyone else with SP2 checking to see if they are experiencing the same error.

Instructions:

1 > go to Start > Run, enter eventvwr.msc and open the "Applications" log.

Do you see the following type error repeatedly:

Event Type: Warning
Event Source: Userenv
Event Category: None
Event ID: 1517
Date: 2/23/2005
Time: 11:08:50 PM
User: NT AUTHORITY\SYSTEM
Click to expand...

If so, go here and install the "User Profile Hive Cleanup Service"

http://www.microsoft.com/downloads/...6d-8912-4e18-b570-42470e2f3582&displaylang=en

2 >> after installing and rebooting a couple of times, go back to the Applications log and look for:

Event Type: Information
Event Source: UPHClean
Event Category: None
Event ID: 1201
Date: 3/13/2005
Time: 12:57:33 PM
User: *****
Computer: *****
Description:
The following handles in user **** have been closed because they were preventing the profile from unloading successfully:

svchost.exe (724)
HKCU (0x200)Click to expand...

Do you see that issue occuring with "svchost.exe" Your PID for svchost.exe will vary (mine was 724, but this can vary as well)
Let me know I'd like to ask you to try something else. On my system this PID of svchost.exe ran two services "termservices" and "dcomlaunch" -- they are somewhat related.

It appears that temporarily dis... Read more

A:XP SP2 "Reality Check" 4Me: Userenv Event ID: 1517

16 more replies
Answer Match 63.84%

Hi,
I was going through the windows security logs with event id 5156 and 5157 to figure out what executable s are getting allowed and blocked. However I am unable to do so, because the source name in security log shows as 'System' instead of showing the executable
name. Can anyone help me to figure out what is the actual exe getting allowed and blocked?

More replies
Answer Match 63.84%

Okay what are the steps needed to make the new Windows 2003 server take over all roles that the old 2003 server had? Here is the scenario. I have 1 2003 server this was really only a glorified desktop but it served its purpose. It was the only Server on the domain in a single domain/single site scenario. I now have had a second 2003 server built And I have it added into the domain. I setup all the same functions DNS Server, Domain Controller - Active Directory, File server and print server.

With Server 1 turned off and Server 2's IP changed to the IP of Server 1 the clients are pulling DNS from the PC's in the domain do work fine I.E. log in fine authenticate have full control over the shares they should, have internet browing.

The problem is that Server 2 (only when Server 1 is turned off) is not able to populate all the active directory objects (I mean it shows the item but it is greyed out and gives some errors about a Global Catalog Server not being available). Why am I geting this if both PC's are setup as Active Directory domain controllers?

Please explain this and let me know what else I have to ensure to do before pulling off this original Windows 2003 server so far I have the following done -

Shares from Server 1 recreated on Server 2 - Check
Server 2 is now configured as the DNS Server and functioning just fine - Check
Server 2 has print ques recreated and everyone is printed to it just fine -check
Server 2 is showing all the AD items from Server ... Read more

A:Added ones Windows 2003 Server want to remove old 2003 server.

This sounds tricky alright. I did the MCSE exams on AD and Windows 2000 server etc, from what I can remember there is only one Global Catalog server in the network. So I assume that when you set up the first server it assumed this role for the network. BUT when you add the second server this finds that there is already a Global Catalog server and does not assume this role itself.

http://www.microsoft.com/resources/...03/all/techref/en-us/W2K3TR_Ad_dctrl_over.asp
"The first domain controller in a forest is automatically created as a global catalog server. Thereafter, you can designate other domain controllers to be global catalog servers if they are needed."

I would try to promote your 2nd server to a Global Catlog server and see if this resolves the issues.

regards,
J
 

2 more replies
Answer Match 63.42%

While looking at Event Viewer, if I send a file to Print, I can see various entries in the logs regarding spooling and cancelled jobs - all located in:
Microsoft->Windows->PrintSystems
But if I send a print job to an offline printer or if there is some other error, like the printer having no paper. I see no reference to an event in the Event Viewer, even though I receive a slide in notification in Windows 10.
Is there a different service that handles these?
It seems that something is catching those warnings or dialogs, but I just cant figure out which source is handling them? It's definitely not PrintSystems.
Is there an error logging attribute I am not checking regarding PrintSystems? I saw something of the kind in references to Windows 7 but for Windows 10 it seems it has been changed.
The reason is I am trying to create a task referencing these warnings and errors.

More replies
Answer Match 63.42%

While looking at Event Viewer, if I send a file to Print, I can see various entries in the logs regarding spooling and cancelled jobs - all located in:
Microsoft->Windows->PrintSystems
But if I send a print job to an offline printer or if there is some other error, like the printer having no paper. I see no reference to an event in the Event Viewer, even though I receive a slide in notification in Windows 10.
Is there a different service that handles these?
It seems that something is catching those warnings or dialogs, but I just cant figure out which source is handling them? It's definitely not PrintSystems.
Is there an error logging attribute I am not checking regarding PrintSystems? I saw something of the kind in references to Windows 7 but for Windows 10 it seems it has been changed.
The reason is I am trying to create a task referencing these warnings and errors.

More replies
Answer Match 62.58%

okay,

My dad recently got new router, its a "P-2602HWT-F3" ZYXEL router,
It should be nice enough for 16 players or so i think.
I find my server on ONLINE LIST ingame, i get the real online IP, but for other players it says.

SERVER IS NOT RESPONDING.

I did port forward, but my router wasnt added on portforward so i choosed a similar model and did its instructions.

I think i may done it wrong, by the way. everytime i start my SRCDS its port change everytime.

What i really want is HELP to get my server to work online..

And: I'm from Norway i dont know if my internet supplier doesnt allow people to host server.

Im a complete noob in this, would be greatful for replies
 

More replies
Answer Match 61.32%

Logon to Outlook Web Access takes long!!
I have just setup Microsoft windows 2003 and Exchange 2003. the problem i have is when i try to logon on Outlook Web Access on the internet the logon windows appears fine, but it's taking long time to logon.
 

More replies
Answer Match 60.9%

Hello,
I created the following performance counter using logman.exe. 

logman.exe create counter US_Triton_Perf_Log -b 9/23/2015 09:30:00 -e 9/30/2099 18:30:00 -r -s $server -si $frequence -cf $folder\$server.txt -f $logtype  -o C:\local\logs\Perfout_$Server --a -v mmddhhmm  -rf  $max_duration

When I do this across multiple servers specifically for Windows Servers 2008/2012, the counter is created to repeat and run everyday at 930PM and stops running everyday at 430PM. This works perfectly fine as intended. However, When I do this for a Windows
2003 server, my created counter is very different.
For example, in this case, I have set to the counters to start at 930AM and end at 1830PM, because I have set a maximum duration of 9 hours, the job terminates and begins on the next day, since I have the repeat option on. However, this does not apply to
our 2003 server; logman creates the job to run once a week in this case it would be on a Wednesday. In addiiton, I noticed that the job doesn't not even start at it's indented time. It actually does not start at all. I also notice that the jobs on all windows
2003 servers are created in a pending status, which then prevents me from removing the counter remotely. 

I would like to know if windows 2003 is capable of working like my win 2008/2012 servers using logman, and if historically, the job has to be kicked off through scheduled task. 




Both Jobs are using the same criteria, but a... Read more

More replies
Answer Match 59.64%

Here's the situation...Every week I ghost copies of our servers. Two Windows 2000 servers and two Windows 2003 servers. Each server has one Western Digital 80GB ide hard drive in a hard drive rack and there is one open rack for inserting the backup hard drives.

I use ghost 2003 on floppies, each is configured to run the ghost backup automatically. When I am ready to ghost, I insert the backup drive, insert the floppy disk and start the server. Ghost loads, backups the drive, and says ghosting is complete. I take the main drive out and replace it with the ghosted copy. The ghost copies for 2000 and 2003 boot up fine, no problems.

(FINALLY TO THE PROBLEM)

When I remove the Ghost copies and reinsert the main drives, the 2003 servers will not boot, but the 2000 servers do. This doesn't happen every week, and sometimes one 2003 server will work and the other won't. When they don't work, the servers post but for some reason don't see the hard drive (this is not the ghost copy). On one of the 2003 servers, I have figured out the problem. When the server won't read the hard drive, I would pull out the drive and reinsert it, fixing the problem.

Recenctly, the other 2003 server wouldn't boot the main drive after it was ghosted. I thought maybe the hard drive bay was bad, so I switched the hard drive out with a spare bay. Reinserted it in the rack and the server still couldn't find the hard drive during boot. If I stick the ghost copy back in... Read more

More replies
Answer Match 59.64%

Well since this is a web/email server I put it here if you think it should go elsewhere let it be moved.

Last night our server IIS service started jumping up and down on our server in all of the hubbub that ensued this service shutting down started turning off other Exchange services on the server as well.

We got it all back up and running by making note of all the services (some which would not restart due to a bunch of errors about executible not being linked to a working service), stopping all the exchange and IIS services, backing up the information store, ripping out IIS in the Add/Remove programs windows components, reboot, reinstall IIS ad components, Reinstall Exchange over the top, Reapplying the service pack and lastly resetting the information store. All was good as far as email use ending and recieving internally and externally works like a champ.

The problem is while OWA was working for us before this tragedy It no longer is working at all. I can go to http:/server and get to the default website so I know parts of IIS is working but when I add in the /Exchange I get a unspecified Error in the top right of the page and when I check the log of the C:\WINDOWS\system32\LogFiles\W3SVC1 I get a 401 error thats not displaying on my broswer. The one big thing I noticed is that there is no Exchange application pool in the Virtual directory under application pool in the properties of the Exchange site. I only get DefaultAppPool I do not see the ExchangeAppPool.

Anyone ... Read more

More replies
Answer Match 59.64%

I am looking for suggestions on an open source email server solution that can run around 25 email accounts. Will be running  Windows 7 systems for clients, but server currently has Server 2008 R2. We do not have access to the internet (closed-restricted network). Open ti try anything available.
 
Thanks.

A:Open Source Email Server - Windows

I have always found sourceforge.net to be a good starting point.  Here's what they return in search results for e-mail server on a Windows OS.

2 more replies
Answer Match 59.22%

Hiya

The Windows Server 2003 Statement of Support (SOS) for Microsoft Project Server 2002 lists detailed instructions for configuring Microsoft Project Server 2002 on Windows Server 2003. The SOS lists the steps IT admins must take after setup on both a clean installation of Windows Server 2003 and on upgraded installations.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Project Server 2002
Microsoft Office (download is Microsoft Word file)
http://www.microsoft.com/downloads/...eb-721f-464e-98eb-67029ee81a1f&DisplayLang=en

Regards

eddie
 

More replies
Answer Match 59.22%

Hiya

By adding an additional server to your Microsoft® Windows® Small Business Server 2003 network, you can enable Terminal Server. Using Terminal Server, you can host your users' desktops. This can save your organization money by allowing you to extend the life of your desktop hardware.
After you have installed Windows Small Business Server 2003 and have completed the To Do List, you can join an additional server to your network and configure it as a terminal server.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word or Word Viewer
http://www.microsoft.com/downloads/...45-57ef-43eb-802f-f274fd937400&DisplayLang=en

Regards

eddie
 

More replies
Answer Match 59.22%

Hiya

Emergency Management Services is a new feature in Microsoft Windows Server 2003 that supports remote management and system recovery for servers that are not accessible through a conventional connection. By using Emergency Management Services with other software and hardware components, you can remotely perform tasks such as recovering unresponsive servers and powering servers off and on, even when they are not accessible through a standard network connection. Emergency management services also supports headless servers—those without a local keyboard, monitor, or mouse. This document provides an overview of Emergency Management Services and its components. It explains how to choose and configure hardware and software that supports Emergency Management Services. It provides guidance for enabling Emergency Management Services, and information about using this technology to troubleshoot problems with remote servers.
System Requirements
Supported Operating Systems: Windows Server 2003

Only servers running a Windows Server 2003 operating system can be monitored using Emergency Management Services. For additional hardware and software requirements, please consult the chapter.

http://www.microsoft.com/downloads/...a6-97d2-448c-a0dd-4cfaa0be7d14&DisplayLang=en

Regards

eddie
 

More replies
Answer Match 59.22%

Hiya

The Windows Server 2003 Statement of Support (SOS) for Microsoft Project Server 2002 lists detailed instructions for configuring Microsoft Project Server 2002 on Windows Server 2003. The SOS lists the steps IT admins must take after setup on both a clean installation of Windows Server 2003 and on upgraded installations.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Project Server 2002
Microsoft Office (download is Microsoft Word file)
http://www.microsoft.com/downloads/...eb-721f-464e-98eb-67029ee81a1f&DisplayLang=en

Regards

eddie
 

More replies
Answer Match 59.22%

i am having microsoft windows server 2003 for small business server Service Pack 1.iwant to run an application build up with ASP.NET & SQL DATABASE.for generating reports we are using crystal reports.
while running the application i am gettig an error message as

File or assembly name CrystalDecisions.Web, or one of its dependencies, was not found.

i tried to copy all the dll files in to the bin folder.still the problem is not solved..
Source Error:
Line 13: debugging ASP.NET files.
Line 14: -->
Line 15: <compilation defaultLanguage="c#" debug="true"><assemblies><add assembly="CrystalDecisions.CrystalReports.Engine, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.ReportSource, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Shared, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Web, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/></assemblies></compilation>
Line 16:
Line 17: <!-- CUSTOM ERROR MESSAGES
Source File: C:\Inetpub\wwwroot\HomagIndiaCIS\web.config Line: 15

Assembly Load Trace: The following information can be helpful to determine why the assembly 'CrystalDecisions.Web' could not be loaded.
=== Pre-bind state information ===
LOG: DisplayName = ... Read more

More replies
Answer Match 59.22%

Currently we are on an NT network with a few 2000 servers tossed in. Today I learned that the plan is to migrate everything to Linux. Lets assume that this only applies to the servers and that the users will still operate with 98/nt/2000/xp. What are your thoughts on this?

I put this in this forum for a reason. Because I'd rather get the advice from 2000 and 2003 experts who know what Linux cannot replace than to hear the Linux fanboys and anti-Microsoft activists praise it to the high heavens.

What would your concerns be if this was done on your network? What problems have you encountered if you'd tried this? Or what successes? Know of any businesses that have done this successfully?
 

A:Is Linux ready to replace Windows 2000 server and 2003 server?

9 more replies
Answer Match 59.22%

Hiya

Proxy Server 2.0 is not compatible with computers running Windows Server 2003. The Proxy Server client is compatible with computers running Windows Server 2003.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Proxy Server 2.0
http://www.microsoft.com/downloads/...f7-b55c-4acd-8167-1923402a9703&DisplayLang=en

Regards

eddie
 

More replies
Answer Match 59.22%

Just bought 2 new Intel S5000VSA server boards, After building both Pcs using the Intel disc that came with board and even the win 2003 setup disc directly I cant seem to install windows server 2003 without receiving a BSOD during setup. All Hardware is compliant with the board. Please Help
 

A:Cant install Windows Server 2003 on Intel s5000vsa server board

Strip the system down. One memory stick, no USB devices, on-board video and sound, no sound card and try the OS install again. Reset the bios to failsafe defaults
 

2 more replies
Answer Match 59.22%

I have a print server running 2003 standard sp2, I have been looking for a way to allow helpdesk staff install and manage printers without logging into the server and without adding them to the admin group.

So I added them to the power users group and the print operators group, that worked fine they were able to UNC ( \\servername ) to the server and install printers, drivers, as well as uninstall drivers? printers ect????.
Now the problem??? this works great from an XP box, but when we try it from a windows 7 machine we get access denied. More specifically it acts like it is going to install the printer then when it comes to the driver installation part it fails ?Printer driver was not installed. Access is denied.?

No changes have been made to the permissions I can log into an XP machine with my profile and it works fine log out go to a Windows 7 machine use the same credentials and I get the above message access is denied. I am an admin of both machines on the windows 7 machine I have UAC turned off completely. Running XP Pro SP3 & Windows 7 pro both are 32 bit machines.

I should also add that I have made the necessary group policy changes to allow printer operators to Load/Unload device drivers and under the local policies/security options I ensured that the Prevent users from installing printer drivers was Disabled.

Any help would be much appreciated.

Thanks

A:Windows 7 & 2003 Server Standard SP2 Unable to remotely install driver on print server

How do you enter the credentials on the Windows 7 machine? I've noticed that you have to use "domain\username" rather than just the username in some cases.

3 more replies
Answer Match 58.8%

Hiya

The Windows Server 2003 Statement of Support (SOS) for Microsoft Internet Security and Acceleration (ISA) Server 2000 lists the steps necessary for ISA Server to function properly on computers running Windows Server 2003. It includes information that an administrator needs to know for setup on both a clean installation of Windows Server 2003 and installations upgraded from the Windows 2000 Server family.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Internet Security and Acceleration Server 2000
Microsoft Internet Security and Acceleration Server 2000 Service Pack 1

http://www.microsoft.com/downloads/...48-8a4b-450e-bd03-1ed3d5e359da&DisplayLang=en

Regards

eddie
 

More replies
Answer Match 58.8%

Setup Is Comcast(DNS/ISP/Phone)->D... Computer Connected --> Server(AD/DNS/DHCP/RRAS)F... Server --> Switch --> WIndows Xp And Sever 2003 As Work Station. Problem Is Trying To Install VNC On All Computers Behind The Primary Server 2003. Need To Forward Ports Through Server 2003 to Dlink For Query to Internet: Thanks In Advance
 

More replies
Answer Match 58.8%

hi guys!
I just installed Windows 2000 Advance Server recently to a Compaq Proliant ML530 server and found out that the license for this server is more expensive than Windows Server 2003 Standard. The SmartStart CD of the compaq does not support windows server 2003 and I don't want to manually re-configure everything and start all over again. Does Win2K A.S. support Windows Server 2003 upgrade?
 

More replies
Answer Match 58.8%

Setup Is Comcast(DNS/ISP/Phone)->D... Computer Connected --> Server(AD/DNS/DHCP/RRAS)F... Server --> Switch --> WIndows Xp And Sever 2003 As Work Station. Problem Is Trying To Install VNC On All Computers Behind The Primary Server 2003. Need To Forward Ports Through Server 2003 to Dlink For Query to Internet: Thanks In Advance
 

More replies
Answer Match 58.8%

Hiya

Microsoft Windows Terminal Server lets users run Windows®-based applications on a remote computer running one of the Windows Server 2003 family of operating systems. This white paper contains testing methodologies, results, analysis, and sizing guidelines for Windows Server 2003 Terminal Server. Hewlett Packard working in cooperation with Microsoft to perform the initial sizing tests and data collection in HP labs. Microsoft performed the final round of testing and analysis collection using Hewlett Packard equipment. The tests were performed using Windows Server 2003, Enterprise Edition, build 3790.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word
http://www.microsoft.com/downloads/...63-7c42-4372-ab37-d8c8987a71da&DisplayLang=en

Regards

eddie
 

More replies
Answer Match 58.38%

Ok so i need to set up windows 2003 server edition as a vpn server so someone can connect to it from home or from his work! Does anyone have any advice i have been trying but nothing seems to allow me to get connected!
 

More replies
Answer Match 58.38%

We had:

1) 1 Windows Server 2003 running Active Directory services to manage logon and permissions for file sharing.
2) 15 workstations.

We now want to have:

1) 1 Windows Server 2008 R2 server running Active Directory services to manage logon and permissions for file sharing.
2) 15 same workstations, with their same user profiles.

So I joined the 2008 R2 server to the domain, and then used the dcpromo tool to make it a domain controller.

Problem is, whenever I take the old server offline, (the 2003 one) everything flips out, logons are slow, and the 2008 server gives people trying to access shared files weird errors like that the server that authenticated them cannot be contacted, and asks them to log in again with their username and password before accessing shared files on the server.

What did I do wrong? I must be forgetting something.
 

A:Replacing a Windows 2003 AD DS server with a 2008 R2 AD DS server

1. Transfer all FSMO roles to your 2008 R2 server
2. Uninstall AD on 2003 server
3. You can now permanently take 2003 server offline
 

13 more replies
Answer Match 58.38%

Hi,

I am not able to connect to OPC server for non admin user in windows server 2003.

I get Runtime error '-536608665(e0040067)':
Failed to connect OPC server.
The system returned the following error message:
Access is denied

But i can connect non admin user to opc server in Windows xp

Is it possible for non admin user to connect OPC server in windows server 2003?

OPC server and client are on same system

Please give me your feedback

Thanks!
Santosh

A:Non Admin not able to connect OPC server in Windows Server 2003

From what I've read on this thread, you'll need to set computer-wide DCOM security permissions. You'll want to peruse that thread.

On another note, this isn't really the best spot for this question. An error message isn't a crash, hang or bsod, and the situation is more relevant to specifically the Windows Server section (even though OPC servers can and often do exist in many client versions of Windows). You'll be able to receive more help there, as it's pertinent to your needs.

4 more replies
Answer Match 57.96%

A few of our DNS servers are reporting Event ID 3000 periodically.

Full logging is on.

There are no failure entries prior to the event.

I can not find much on TechNet either.

I see that this is a problem for others in other forums, but I could not find a resolution on any site.

Anyone have a cause and resolution?

Details of the error entry:

Event Type: Warning
Event Source: DNS
Event Category: None
Event ID: 3000
Date: 3/13/2006
Time: 6:21:05 AM
User: N/A
Computer: domain controller (changed name)
Description:
The DNS server has encountered numerous run-time events. To determine the initial cause of these run-time events, examine the DNS server event log entries that precede this event. To prevent the DNS server from filling the event log too quickly, subsequent events with Event IDs higher than 3000 will be suppressed until events are no longer being generated at a high rate.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
 

A:Windows 2003 DNS Event ID 3000

http://www.eventid.net/display.asp?eventid=3000&eventno=297&source=DNS&phase=1
 

2 more replies
Answer Match 57.96%

I am running Windows Server 2003 with Terminal Services enabled and was wondering if there are any compatibility problems with installing Word 2003. Microsofts website says Windows 2000 with SP3, Windows XP, or later as OS requirements but that is very general.

Thanks in advance, Dave
 

A:Word 2003 and Windows Server 2003

7 more replies
Answer Match 57.54%

I have the Purchased Retail Version of MR6 and have made several successful (NO Failed Yet) of my ENTIRE WIN 10 Computer (Image) onto my USB Seagate 1.5TB External HD.

In the Log I get this: Event ID: 513 Source: "Microsoft-Windows-CAPI2"

What does it mean ?? Looked all over the Internet but didn't find a "Fix" !!

Thanks !!

Wen

A:MACRIUM REFLECT - Event ID: 513 Source: "Microsoft-Windows-CAPI2"

Originally Posted by wen


I have the Purchased Retail Version of MR6 and have made several successful (NO Failed Yet) of my ENTIRE WIN 10 Computer (Image) onto my USB Seagate 1.5TB External HD.

In the Log I get this: Event ID: 513 Source: "Microsoft-Windows-CAPI2"

What does it mean ?? Looked all over the Internet but didn't find a "Fix" !!

Thanks !!

Wen



See here: http://knowledgebase.macrium.com/dis...in+Windows+8.1

Macrium support in their forum characterizes this as a "benign" event. See Nick's post at http://forum.macrium.com/Topic3154.aspx

Since you have paid version, you can register at this forum - will need to enter confirmation of paid status to complete registration. If you only want to browse and not post, no need to register.

5 more replies
Answer Match 57.54%

hello comtuper aces.
As title says i don't have internet. i'm useing TPlink router.
The problem is that sometimes ( at work days (mon-fri) internet stops working (diagnostics says that dns server is not responding) but after couple of minutes everything is back to normal. but then its happens in weekends i get this information(in title) and everything is back to normal just in monday.
i search for a solution in web got a lot of methodds how to solve this problem, non of them was helpful.
MY QUESTION IS : who is responsible for this problem( in title) my laptop W7 SP1 64 bit or this is ISP fault.
I'm asking here becous i dont trust them. i already cought them lieing to me once....
and maby some one can suggest some alternatives this this problem ?
THANKS in advance.
 

A:Solved: windows can't communicate with primery device or source (primary dns server)

6 more replies
Answer Match 57.12%

Hi all ,

This is my first post on this website , i hop i can find some one to help me .
The problem is i installed windows 2003 server on my computer and i don't know how can setup ftp server and web server on it ? i create the domain but i faild to do the rest . I have MCSE 2000 but i feel i don't take anything , I am looking for any help like pdf file or book can i buy .
also the register.com ask me for dns server on my home page , is it the dns ip address comes with my ip static address or not ?

Thanks for help !!!
 

A:SETUP FTP & WEB SERVER ON WINDOWS 2003 SERVER ...HOW ?

Control panel. add/remove programs, on the left add/remove windows components, application server, iis. Click on details of iis for ftp.
 

1 more replies
Answer Match 57.12%

We have a Windows 7 Pro laptop that can't see any of the 300 or so Windows XP and Windows Server 2003 Machines.

It can, however, see all (around 13) Windows Server 2008 and Windows 7 Machines that are on the network. Using \\ServerName\Share doesn't connect, and they don't show up on the network map.

It can ping the servers though. They ping by hostname and by ip address. Other Windows 7 Pro Laptops don't have this same problem!

Additional Info:
They are all joined to the domain; servers, laptaps, etc.

A:Windows 7 Computer can't see Server 2003 Server

My problem is when i join in 2003 domain server i get the msag

"An attempat to resolve the DNS name of a domain controller in the domain being joined has failed.
Please verf=ify this client is configured to reach a DNS server that can resolve DNS names name in
the target domain. for information about network troubleshooting, see windows help "

tell me what i have to do! 10Q

1 more replies
Answer Match 57.12%

Hi, Can any1 help me i have did upgrade Windows 2000 Ent. Server (SP4) to Windows 2003 Ent. Server, but after rebooting the machine all of sudden BLUE screen appears with mentioning below error though OS working in safe mode. Please help me out to resolve the issue ASAP.
Driver_IRQL_NOT LESS OR EQUAL

Then at the end it says
Beginning dump of physical memory

HYDIS.sys address 7505AF5 base at F74E9000
Stop: 0x000000D1 (0xf3bbf000, 0x00000002, 0x00000001, 0xF7505AF5)

Physical memory dumb.
Contact your system administrator or technical support group
BR,

Sharjeel
 

More replies
Answer Match 56.7%

Getting this message in the Eventlog on Windows 2000 Server:
The driver detected a controller error on \Device\Harddisk0\DR0

SCSI Controller Adaptec 291060 Ultra160
Hard Drive is SCSI Fujitsu MAN3367NP (36.8GB)
Server has been running fine for 2+ Years, then
this message appear during heavy read/write to
Hard Drive (e.g., Tape Backups, VirusScans, etc).

Anyone have any ideas?
Update the Hard Drive Firmware
and the Ultra160 Drivers.
 

More replies
Answer Match 56.7%

Folks -

I get this error form IE. Let me know if you guys come across this and have fix.!!

Thanks..

Event Type: Error
Event Source: msie6030
Event Category: None
Event ID: 421
Date: 3/10/2004
Time: 6:58:06 AM
User: domain\username
Computer: hostname
Description:
The description for Event ID ( 421 ) in Source ( msie6030 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: The etc variable (D:\temp\username) is not defined for terminal server for user: username.
 

More replies
Answer Match 56.7%

Has this error been dogging your system, too?

g

A:Unusual event source

Info here My computer is not the Master Browser

3 more replies
Answer Match 56.7%

Hi there,

i am having some issues with an upgrade on Windows NT 4.0 to Windows 2003 Stamdard with Active Directory.

The environment consisted of one Windows NT 4.0 PDC and four Windows NT 4.0 BDCs. As per the Microsoft recommended method to upgrade this environment to Windows 2003 I performed the following:

1. Build a new Windows NT 4.0 server with SP6.0a as a BDC on the production network.
2. Promoted this newly built BDC to a PDC whilst on the production network.
3. Ensured that the old PDC had been demoted to a BDC and that all servers were happy replicating with the newly built PDC.
4. I then removed the newly built PDC from the network, upgraded it to Windows 2003 Standard with Active Directory, turned on the registry setting to make this Windows 2003 a NT 4.0 emulator, and connected it back to the production network.
5. I then checked server manager on the BDCs and confirmed that they could "see" their DC again, and the DC could see the PDCs.
6. I left the server to run overnight then the next day I returned to it and ran the command "Nltest.exe /bdc_query:<domain name> to show the connection and replication status of the BDCs.

This is where I ran into problems.

Two out of the five BDCs were quite happy showing a connection status of SUCCESS and were replicating happily between themselves and the DC according to the Event Viewers on both the 2003 DC and the two BDCs.

These two servers were correctly displaying the status code 0 0x0 NERR_SUCCES... Read more

More replies
Answer Match 56.7%

Hello, I upgraded my machine to Win7 x64 Pro about 3 weeks ago. My HW is an Asus mobo, Intel Q9450 w/8GB RAM. The boot drives are two Raptors configured as RAID01. All the drivers are the latest available from Intel, Asus and 3rd party vendors. My WEI is 5.9, limited by the disk transfer rates, otherwise 7.1 and 7.2 on the other indexes. I've been receiving these errors at boot; Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin Source:        Microsoft-Windows-Kernel-EventTracing Date:          11/10/2009 7:51:03 AM Event ID:      4 Task Category: Logging Level:         Warning Keywords:      Session User:          SYSTEM Computer:      herbt-PC Description: The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">   <System>     <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />     <EventID>4</EventID>     <Version>0</Version>     <Level>3</Level>     <Task>1</Task>     <Opcode>10</Opcode>     <Keywords>0x8000000000000010</Keywords>     <TimeCreated Sy... Read more

A:Event ID: 4, Source: Microsoft-Windows-Kernel-EventTracing, maximum file size for session "ReadyBoot" has been reached.

Hey guys, the solution is simple - just increase the max file size! Go to:
 
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger\ReadyBoot
 
The MaxFileSize key is a DWORD with a default decimal value of 20. Increase this to, say 60, and the problem will go away.
 
Luck to ya!

24 more replies
Answer Match 56.28%

Log Name:      Microsoft-Windows-Kernel-PnP/Configuration
Source:        Microsoft-Windows-Kernel-PnP
Date:          1/16/2016 6:00:17 AM
Event ID:      411
Task Category: None
Level:         Error
Keywords:      
User:          SYSTEM
Computer:      DESKTOP-7C1QOQ8
Description:
Device IDE\CdRomHL-DT-ST_DVDRAM_GH24NSB0________________LN01____\5&3682c44a&0&1.1.0 had a problem starting.

Driver Name: cdrom.inf
Class Guid: {4d36e965-e325-11ce-bfc1-08002be10318}
Service: cdrom
Lower Filters: 
Upper Filters: 
Problem: 0x13
Problem Status: 0xC0000034
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
    <EventID>411</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2016-01-16T14:00:17.169630500Z" />
    <EventRecordID>647</EventRecordID>
    <Correlation />
   ... Read more

More replies
Answer Match 55.86%

Hello, there i hope you guys can work if not then maybe lead to where i can get help.
So after about leaving my computer on for more than 3 or 4 days on. I will start to get some weird issues. I decided i would go to event viewer to check it out. I keep getting event ID 2001 about twice every minute nonstop.

Spoiler
Log Name: Application
Source: Microsoft-Windows-PerfDisk
Date: 7/5/2011 10:24:44
Event ID: 2001
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: ChrisDesktop-PC
Description:
Unable to read performance data for the Disk performance counters.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PerfDisk" Guid="{7F9D83DE-8ABB-457F-98E8-4AD161449ECC}" EventSourceName="PerfDisk" />
<EventID Qualifiers="32768">2001</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-07-05T17:24:44.000000000Z" />
<EventRecordID>26125</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>ChrisDesktop-PC</Computer&g... Read more

More replies
Answer Match 55.86%

The two computers are windows 7. One is Pro 64 bit the other Home Premium 32 bit. I'm getting this in the event viewer of the 32 bit Home premium. The name " WORKGROUP " :1d" could not be registered on the interface with IP address 192.168.1.25. The computer with the IP address 192.168.1.20 did not allow the namee to be claimed by this computer. 192.168.1.25 is a Windows 7Pro 64 bit and 192.168.1.2 is a Windows 7 Home Premium 32 bit. This is what the event viewer shows.

Log Name: System
Source: NetBT
Date: 1/16/2011 11:26:11 AM
Event ID: 4321
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Janis
Description:
The name "WORKGROUP :1d" could not be registered on the interface with IP address 192.168.1.25. The computer with the IP address 192.168.1.20 did not allow the name to be claimed by this computer.
Event Xml:

4321
2
0
0x80000000000000

5900
System
Janis

WORKGROUP :1d
192.168.1.25
192.168.1.20
000000000400320000000000E11000C001010000010000C002000000000000000000000000000000

--

A:Event 4321 Source NetBF

Are you using static IPs or DHCP on these computers? Have you tried leaving that workgroup and creating a new workgroup (perhaps something like "workgroup2" or more unique)? And, are you using a third party firewall/security suite?

2 more replies
Answer Match 55.86%

Hi everyone. Got this damn annoying event log entry that I just can't get rid of. Even just some advice on where to look further or somekind of assurance this is a non-issue. No network users are having any problems, I am getting no reports of anyone getting "bounce backs" from emails... but we get at least 3 of these errors a day. Thanks for any help - here is the details...
_________________________________________________________________________
Event Type: Error
Event Source: MSExchangeTransport
Event Category: SMTP Protocol
Event ID: 7515
Date: 24/07/2007
Time: 5:41:06 AM
User: N/A
Computer: *******
Description:
An error occurred while Microsoft Exchange Intelligent Message Filter attempted to filter a message with ID <[email protected]>, P1 From smtp:[email protected] and Subject Bye. This message will not be filtered. The error code is 0x800710f0.
_________________________________________________________________________

*_*_*System details*_*_*

Operating System
Windows Server 2003 Standard Edition, Small Business Server Restricted Service Pack 2 (build 3790)

System Model
HP ProLiant DL320 G4
System Serial Number: CN762300V1
Chassis Serial Number: CN762300V1
Enclosure Type: Rack Mount Chassis

Processor
3.00 gigahertz Intel Pentium D
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache

Main Circuit Board
Bus Clock: 800 megahertz
BIOS: HP D20 02/08/2006

Drives
187.39 Gigabytes Usable Hard Drive Capacity
52.00 ... Read more

A:Event ID:7515 Source:MSExchangeTransport

Heres info on it http://www.microsoft.com/technet/su...tID=7515&EvtSrc=MSExchangeTransport&LCID=1033
 

2 more replies
Answer Match 55.86%

Hi,

I do not know much about event logs. Win 8 seems to be hanging quite a bit especially when I am using the new Visual Studio.

I checked in the Event Log and have found the following error seems to be happening frequently.

Event ID 15, Source: cdrom, Task Category: none

in the details it says,

The device, \Device\CdRom0, is not ready for access yet.

What does this mean? Can it be fixed?

Many Thanks!

More replies
Answer Match 55.86%

Hello all, and thanks for taking time to look at this.

Recently I've been experiencing some crashes while playing WoW mostly, when it happens the PC sounds like it's powering down and it loses all video and audio signals (it is still running though) forcing me to do a hard reset, windows event log shows the following (Excuse me for the dutch, but the dutch parts are just standard info I think)

Logboeknaam: System
Bron: Microsoft-Windows-Kernel-Power
Datum: 13-4-2010 18:36:02
Gebeurtenis-id:41
Taakcategorie: (63)
Niveau: Kritiek
Trefwoorden: (2)
Gebruiker: SYSTEM
Computer: LOLCAT-PC
Beschrijving:
Het systeem is opnieuw opgestart zonder eerst correct te worden afgesloten. Deze fout is mogelijk veroorzaakt doordat het systeem niet meer reageert of is vastgelopen of doordat de stroom is uitgevallen.
Gebeurtenis-XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2010-04-13T16:36:02.296875000Z" />
<EventRecordID>11345</EventRecordID>
<Correlation />
<Execution ProcessID="4" Thread... Read more

A:Event 41 Source: Kernel Power

Some aditional info: I tried to run CHKDSK but it crashes everytime there's 1 second left to interupt the test, I also tried defragging yesterday but it was stuck at 0% for several hours, combined with the error I'm getting, could my HDD be failing?

1 more replies
Answer Match 55.86%

Note: I have not been able to include a performance report as I got the following error after following instructions:

Error:


An error occured while attempting to generate the report.



The wait for the report generation tool to finish has timed out.
Hi I was not present when the problem happened but my wife was using the computer to surf on normal websites and suddenly she got a Blue screen.

I've inspected the event viewer and it says the following just before it happened:

wlcomm (1396) C:\Users\M&M\AppData\Local\Microsoft\Windows Live Contacts\{ef37ac52-7d6a-4282-996d-d23cc6b603f5}\: A request to write to the file "C:\Users\M&M\AppData\Local\Microsoft\Windows Live Contacts\{ef37ac52-7d6a-4282-996d-d23cc6b603f5}\DBStore\contacts.edb" at offset 2834432 (0x00000000002b4000) for 8192 (0x00002000) bytes succeeded, but took an abnormally long time (9574 seconds) to be serviced by the OS. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem

source: ESENT
eventID: 508
level: warning

Can someone help me track down the problem?

SYSTEM SPECS:

OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name VAIO
System Manufacturer Sony Corporation
System Model VPCF11S1E
System Type x64-based PC
Processor Intel(R) Core(TM) i7 CPU Q ... Read more

A:BSOD, event id 508, source: ESENT

Update your computer to SP1 - Learn how to install Windows 7 Service Pack 1 (SP1)


Code:
yk62x64.sys Mon Jun 15 12:49:34 2009 (4A367B9E)
Update your Marvell network driver - Marvell: Download Drivers

Run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan using SeaTools - Both long and short tests
4. SFC /SCANNOW Command - System File Checker

...Summary of the dumps:

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Apr 27 13:37:59.029 2011 (UTC - 4:00)
System Uptime: 1 days 9:24:17.137
Probably caused by : CLASSPNP.SYS ( CLASSPNP!BuildDeviceInputMdl+19 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: collsvc.exe
FAILURE_BUCKET_ID: X64_0x3B_CLASSPNP!BuildDeviceInputMdl+19
BiosReleaseDate = 05/14/2010
SystemManufacturer = Sony Corporation
SystemProductName = VPCF11S1E
MaxSpeed: 1600
CurrentSpeed: 1596
??????????????????????????????????????????????????????????????????????????????????????``

Code:
fffff880`05b7e000 fffff880`05bbc000 1394ohci 1394ohci.sys Mon Jul 13 20:07:12 2009 (4A5BCC30)
fffff880`00f79000 fffff880`00fd0000 ACPI ACPI.sys Mon Jul 13 19:19:34 2009 (4A5BC106)
fffff880`040c9000 fffff880`04153000 afd afd.sys Mon Jul 13 19:21:40 2009 (4... Read more

3 more replies
Answer Match 55.86%

Any ideas as to what the above error message means? It occurs after every reboot.

Thanks,

Bob Frost

More replies
Answer Match 55.86%

Anyway i tried starting Windows media player & i got the error

wmplayer.exe - Bad Image
---------------------------
C:\Program Files (x86)\Windows Media Player\USERENV.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0xc0000428.

So i googled it & some other people had the error to & Microsoft advised people on turning it off in Programs & Features & re-installing it, it doesn't work.....

SO the simple fact is..... Windows Media Player doesn't need the file, like it says - 'C:\Program Files (x86)\Windows Media Player\USERENV.dll is either not designed to run on Windows'

So there it is, delete it & it will run fine, i tried, it worked
Ive been finding bugs & patching/fixing them, Post a reply if it worked or whatever happened

A:(HOW-TO) Fix Windows Media Player 'userenv.dll' Error

'C:\Program Files (x86)\Windows Media Player\USERENV.dll
is NOT a file supplied by Windows.

1 more replies
Answer Match 55.44%

Windows 7
-x64
Windows 7 Ultimate
Full Retail
System Hardware is all new
First Install of the OS

1 x LG 22X DVD Burner - Bulk Black SATA Model GH22LS50 LightScribe Support - OEM
1 x SAMSUNG EcoGreen F2 HD103SI 1TB 5400 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
1 x OCZ Signature 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model OCZ3SR1333LV4GK
1 x OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply
1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor BX80616I3540
1 x GIGABYTE GA-H55N-USB3 LGA 1156 Intel H55 HDMI USB 3.0 Mini ITX Intel Motherboard

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a (0x0000000000000031, 0xfffffa8003a2f160, 0xfffff8800710e000, 0xfffff8a004a9b4f9). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 112910-28984-01.

I've been dealing with this issue for several days on my own and decided to feed my information to a forum for help.

The system would randomly stall, reboot, or BSOD. I followed the suggestion of previous forums in which a similar problem was submitted. I updated all the drivers including but not limited to network, video, audio, and chipset directly from the manufacturer website as opposed to the install CD that came with the hardware. The issue seemed to be gone after two days of trying to reproduce the error by running burn tests, playing games, and watching streaming videos. ... Read more

A:BSOD Event 1001 Source Bug Check

Start troubleshooting your problem by removing Norton Symantec Antivirus and replace it with MSE.
You may go back to Norton after your Windows have stabled.
http://www.microsoft.com/security_essentials/

Then 3 dmp point to NTFS_FILE_SYSTEM (24) so I would recommend you to diagnose your hardrive.
1] Right click Command Prompt → run as admin → chkdsk /f /r
2] Use manufacture hardrive diagnostic tools → Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.

Another dmp point to BAD_SYSTEM_CONFIG_INFO (74).
It indicates OS corruption, then you must perform system file checker:
Right click Command Prompt → run as admin → sfc /scannow

Update this driver:
teamviewervpn.sys Thu Dec 13 01:22:09 2007 → TeamViewerVPN Network Adapter

And turn on your Windows Update.

3 more replies
Answer Match 55.44%

Hello !

There is an unexpected reboot on a 2003 server R2 Std SP1.

I see the following messages on the Windows Events :

Event 1001, BugCheck
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000027 (0x00000000baad0073, 0xfffff88009264038, 0xfffff88009263890, 0xfffff88003684a3a). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 082615-14913-01.

Event 41, Kernel-Power
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

I took the MEMORY.DUMP from the server and put it on my Workstation. I use BlueScreenView but it show nothing. I think it's because it use "minidump".


What should I do ? Did the Events (maybe the params) means something for you ?

Thanks for you help.

More replies
Answer Match 55.44%

 In the Event Viewer have found repeating error from the source NFTS, indentificator 55 :
"There has been found damage in the files structure of volumin Windows8_OS.
In the index structure of system files there has been found a damage. Reference numer to the  file :
0x100000000285d. Name of the file : "\Windows\System32\config." Attribute of damaged index : ":$130:$INDEX_ALLOCATION".
Have done as follows :
1/ sfc/scannow - the result :"Windows Resource Protection did not find any violations"
2/ dism/online/cleanup-image/restorehealth - the result : "The restore operation completed successfully. the component store corruption was repaired. The operation completed successfully".
3/ chds/f/r -after scanning no information about damages, moreover have checked the disc with HD tune program and  it is healthy.

What else can be done to repair this damage ?
Would appreciate your advise.
Thanks in advance, Ewa

A:Event Viewer error from NTFS source

You should use the Seagate tool for a seagate hd.  It is more accurate than Generic tests.Wanikiya and Dyami--Team Zigzag

5 more replies
Answer Match 55.44%

Hi all,

I need help with my Event veiwer warning logs. Everytime I turn on my computer, I see this Event ID warning:

Log Name: System
Source: Microsoft-Windows-WLAN-AutoConfig
Date: 9/20/2007 12:14:38 PM
Event ID: 4001
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer: ****
Description:
WLAN AutoConfig service has successfully stopped.

I'm connected to a wireless router, Linksys WRT54G 8.0.2 firmware. I was having the same warning with 8.0.0 firmware.

Does anyone experience this same problem? I've removed most of the warnings in my event viewer and I'm now down to 1 (which is this error).

It doesn't do anything bad in my system whatsoever, but I just don't want to see any errors or warnings in my System Event Log.

The only thing I notice is everytime I turn on my computer, Instead of showing the "Connected Icon (the globe)", it shows the "Limited or connectivity (the !)" for 2-5 secs then it eventually shows the "Connected Icon" and it works perfectly.

Troubleshooting done:
- updated the NIC drivers
- updated the firmware of Wrt54g wireless router
- Local IP is set manually

Thank you very much.
 

A:Event ID warning: 4001 / Source: WLANAutoConfig

bump
 

1 more replies
Answer Match 55.44%

The description for Event ID 14 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.



over 5000 errors in event viewer in last hour!!!!!!!!!! nothing really happens, there is no problem playing games, or something, but it is really annyoyng. i installed latest drivers 20 minutes ago, what should i do?

my graphics card is geforce 7600 gs.
athlon 2600+
1.5 gb ram

A:The description for Event ID 14 from source nvlddmkm cannot be found.....

help me :(

1 more replies
Answer Match 55.44%

HI; I GOOGLED : TV tuner malfunction. (0xc0040597) WebcamMax, WDM Video Capture and it brought to a bleeping computer message that this might be VUNDO virus. SCANS PRODUCED 4 INFECTIONS BUT NONE WERE VUNDO. I reformatted my pc and re-installed the "Webcammax" software and the aforementioned error code again appeared in my Event Log. I scanned my system with norton secuirty 2008 and malaware bytes and no infections were found. Can anyone suggest reason for aforementioned error message other than it being Vundo?
When i uninsall "webcammax", the error messagae disappears from event log. I downloaded the software from cnet and i scanned the software tihe norton and malawarebytes with no infections found.
Please help because I really like the "webcammax" software and would like to keep it on pc.

Stephen

More replies
Answer Match 55.44%

Had my system freeze up due to the following system error that is becoming more and more frequent:


Code:
The description for Event ID 9 from source KScsiPrt cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

\Device\Scsi\KScsiPrt1
Any ideas on how to fix this? Perhaps sfc /scannow?

A:The description for Event ID 9 from source KScsiPrt cannot be found...

sfc /scannow found no integrity violations... I am at a loss as to how to fix this issue at this point. Further suggestions are very welcome.

6 more replies
Answer Match 55.02%

Hello all, I'm not sure if this is an operating system question or more of a software development question.

Anyway, I have a legacy COM service, a COM server that runs as a windows service, that was written for Windows NT 4.0. I have managed to use the service on both Windows 2000 and Windows XP unchanged. However, I now wish to run the service on a Windows Server 2003 machine and I can't seem to get it to work.

This is what happens:-
1. Install the service and set it to log on using a domain account.
2. Start the service from the services.msc applet.
3. Start the client application and connect to the service.
4. At this stagte the client applicaiton freezes for approximately 60 seconds and then returns with the error message "Server execution failed".

I've also tried using the client whilst the service is stopped. In this case when I connect the service is started but I get the same error.

The development team also provided a standalone application that hosts the exact same COM objects, mainly for debugging purposes. If I use the standalone application everything works fine.

Its all very strange.

Does anyone have any idea what the cause might be? And preferably a solution.

Thanks,
Kep.
 

A:DCOM service on Windows Server 2003 - "Server execution failed" when connecting

I found the answer.

http://msdn.microsoft.com/newsgroup...-DC48AB0DA5C9&dglist=&ptlist=&exp=&sloc=en-us

The above discussion says that a service must enter a running state before a COM server calls CoRergisterClassObject. So I guess its a development problem.

Not sure why it only manifests on Windows Server 2003 though.

Kep.
 

1 more replies
Answer Match 55.02%

Hello,

I have a strange problem.

I configured a new VPN Server on Windows 2003 (Usual configuration).

There are 3 clients. Win 2000 Prof, Win 2003, Win XP. While Win 2000 Prof can make a VPN connection to the server, others cannot. They all give error 800.

All the clients can ping the public IP of the problem-VPN server.

All these clients can connect to another VPN server on Win 2003 without any problems!! Hence, I feel some thing is not good with the VPN server.

Please advise

Thanks.
 

A:VPN Server on Windows 2003 Server

Might want to look at the MS article:
http://support.microsoft.com/default.aspx?scid=kb;en-us;319108
 

3 more replies
Answer Match 55.02%

I am trying to setup my own VPN, I have installed Server 2003 on my server machine. The server machine is connected to my Netgear router which connects to the internet.

I have setup the VPN service and can connect localy using an advanced connection setup in windows XP on my client machine.

Also on my network is a fileserver running windows vista(soon xp or server) the server has over 500gb of storage mostly full t hat i want to share over my VPN. This is also onnected to the netgear router.

My problem is with sharing these files. How do i set the drives on my file server as standard shares for all VPN connected users? I can access them local over the lan but not sure how to share for users dialing into the VPN?

any step by step tutorials links would be welcomed or if anyone can help me it would be brilliant or if somone can get on msn with me and walk me through what im doing wrong that would be awsome too. Thanks alot
 

A:Windows Server 2003 as VPN server

Information for how to configure a Windows2003 VPN server can be found at:
http://www.onecomputerguy.com/networking/w3k_vpn_server.htm

You don't need to make any changes or additions to shares in regards to VPN client's being able to access previous shares on the server. Whatever you have assigned for the LAN access can work for VPN.
 

1 more replies