Tech Problem Aggregator

Sound stopped playing after installing new Acer Monitor.....

Q: Sound stopped playing after installing new Acer Monitor.....

windows xp everything utd ....People can hear me talking using google talk but all sound for my computer stopped after adding the new Monitor. All the simple trouble shooting shows everything normal....no mutes ....lowerd levels etc.....have tried rebooting no good.....must besomething simple but I must be too simple to figure it out

A: Sound stopped playing after installing new Acer Monitor.....

7 more replies
Answer Match 64.26%

I switched OS to Ubuntu for about a week, LoL didn't run well in Ubuntu so I reinstalled windows 8. When i open playback devices all I have is NVIDIA HDMI Output (port 0) and (port 1), both of which show unplugged and disabled. I have disabled and disconnected devices set to show, but those are all that show. I have reinstalled drivers, reinstalled windows, downloaded Realtek, enabled onboard audio in BIOS, but nothing has fixed the problem so far. When I boot into Ubuntu via USB, the audio works fine.

More replies
Answer Match 63.42%

I have a soundblaster live soundcard. Periodically, the sound would stop in the middle of playing. I figured out that the card was loose so screwed the card in and the sound returned. But then stopped again. I tried putting the sound card in a different slot but still no sound. Any suggestions?
 

More replies
Answer Match 63.42%

And it's not just the laptop speakers - it doesn't work when I put headphones in either.

I opened up audacity and as it was loading, all my sound that was playing cut out. I system restored my laptop and it was fixed, and thought it crashing with audacity was just a coincedence, so I reopened audacity. The sound stopped working again. I uninstalled audacity, that didn't work, so system restored it again but this time that didn't work either. I tried an even earlier date but it still didn't work.

Help please?
Thanks x

p.s. i'm not really technical so I apoligize in advance, ty.
 

A:Laptop stopped playing sound?

Hi Sarahbbb!

What's the model of your laptop? (It's usually on a sticker on the bottom side, something like "Dell Dimension L6203")
 

2 more replies
Answer Match 63.42%

Hello
I am new here & need help with this one. A couple of days ago the sound in my pc failed. It was working fine before that. I tried the usual, installing the sound driver again but it did not work.

Now I can see the driver icon in the system tray & occasionally the volume control icon as well but when I click it, a message is displayed that there are no active mixers available. Also I use AIMP2 as my music player & it has been displaying this message "cannot initialize sound engine". My speakers work fine.

I am not sure but I think the problem is with the sound card. Any ideas??? PLEASE HELP .

Btw my sound card is built into the motherboard & the motherboard is about 4-5 yrs old. Here are the specs:

CPU-Z TXT Report
-------------------------------------------------------------------------

Binaries
-------------------------------------------------------------------------

CPU-Z version 1.52.1

Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 1

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Pentium 4
Codename Willamette
Specification Intel(R) Pentium(R) 4 CPU 1.80GHz
Package (platform ID) Socket 478 mPGA (0x2)
CPUI... Read more

A:Sound stopped playing suddenly

16 more replies
Answer Match 63%

Hello, i was trying to fix my microphone problem after i stumbled on a thread on this site, that advised to install audio driver from acer support downlaods. i did that, now my speakers dont work anymore. i need someone to help me pls. i have un-installed the high definition software but same problem.

A:acer 5552 speakers stopped working after installing audio driver

Are the "Speakers" set as the default audio playback device?

2 more replies
Answer Match 63%

Hi! I have a couple questions regarding how to hook this up/what I need to buy. The monitor only has one VGA IN slot, so I'm wondering if I need something that can switch the input between 360 and computer. Does anything like that exist? Can anyone give me specific details as to what I need to buy to hook my 360 up to my PC monitor? Playing games on my small standard-definition TV is starting to become more and more of a hassle, as everything's so hard to read. Thanks!

This is the monitor I have: http://www.newegg.com/Product/Produ...009185&cm_re=acer_v173-_-24-009-185-_-Product
 

A:Solved: Playing Xbox 360 on Acer v173 LCD PC Monitor

7 more replies
Answer Match 62.58%

About four days ago as of the time of writing this my computer stopped playing sound after a restart with updates installed. That is actually not quite true. The volume mixer shows that it is playing sound, but no actual sound comes out of whatever device I plug in. Speakers don't work, headphones don't work. I know the devices themselves work as I have plugged them into other computers and they worked there, but on this specific computer no such luck. It is not muted. The drivers show that they are working properly. I've reinstalled the drivers anyway. I've set the default device to that of my speakers. I have updated everything from BIOS to Chipset.

After that I tried searching for some clue or advice on the internet to no avail. Then I tried the windows troubleshooter and Microsoft fixit tool. Neither could find anything wrong.

The computer came new out of the box with two sound card drivers installed. Which are IDT High Definition Audio CODEC and AMD High Definition Audio Device. Which are both under Sound, Video and game controllers in the device manager. Under Audio inputs and outputs it shows the following: Digitial Output (S/PDIF) (IDT High Definition Audio CODEC), Speakers/Headphones (IDT High Definition Audio CODEC ), and Stereo Mix (IDT High Definition Audio CODEC). It is the speakers/headphones I want to use as that is my default device. When I click on those the driver is listed as Audio Endpoint and that the device is working properly.

Two things I have be... Read more

A:Computer stopped playing sound after update

First thing, check the Sound Panel, Playback section. Your "Speakers" should be set as the default audio playback device. If it has changed to some other device that could be the problem.

Your PC sound "card" (actually a chip on the motherboard) is the IDT High Definition Audio Codec. The AMD High Def is the audio for HDMI. Which is another issue, if you have an HDMI cable plugged in, Windows will automatically change the default audio playback device to the HDMI.

If the playback device is set properly to the "Speakers", try resetting the sound by uninstalling the IDT in the Device Manager (DO NOT also uninstall the drivers). Then restart the PC and when Windows starts it will reinstall the sound. If there were some Windows corruption with the sound this will fix it.

5 more replies
Answer Match 62.58%

Found several similar reports over this and MS's Answers forums with no final resolution/fix to problem. Worse they are dated several years ago and nothing current.

I feel I need to emphasize one-time that this problem only concerns the Startup system sound that plays right after warm or cold boots when the system first arrives at the desktop and _only_ that sound. All other system and program sounds work okay.

Up to 1 or 2 months ago for a couple years now the Startup sound has been playing just fine--then I all of a sudden realized it was no longer playing at all. All other system and program sounds/audio play fine.

1. SFC finds nothing needing fixing.
2. Startup sound check box in Sounds tab is and has always been checked though I do not recall when MS made this a security issue protecting it.
3. Talked to nVIDIA and learned nothing new.
4. Talked to Crucial and learned nothing new.
5. Talked to MS and learned nothing new. They are unaware of problem...even though for some it is a couple years old. MS's best recommendation though, which I might still try at some point because "what could possibly go wrong?" is to run an In-Place Upgrade on Windows 7 which supposedly will restore the OS leaving my programs/data and some customizations(?) in tact.
6. Actual Startup sound wave file apparently resides inside a .dll which iirc is threaded here in sevenforums.
7. I also looked through the Registry searching for "startupsound" and found string i... Read more

A:Startup System Sound Stopped Playing...

Welcome to Seven Forums Ratsneve.
Personally I would be thankful at losing the sound. I have all turned off.
But seriously, I don't know what the issue could be. The sound files reside here. C:\Windows\Media

9 more replies
Answer Match 62.16%

Hello,

I wanted to upgrade the drivers of my Moms Laptop which is 2 year old. Buy holiday gone haywire! Here's what I did:

1) Uninstalled all Drivers from Windows XP Add/Remove
2) Flash the BIOS successfully to 2.4 version. Reboot to Windows was normal.
3) From the regional Acer website, I downloaded all drivers. These are the driver list for info (not download this site):

http://www.laptopdriversfreedownlo [...] 32bit.html

4) I started with Chipset, then Video, Network, Sound, and last one was Bluetooth.
Problems:

a) Realtek Sound doesn't show up in the Device Manager (sound device disable).
a) MODEM driver doesn't install (no idea why).

NOTE: before I fiddled with this Laptop, there were no problems (a) and (b) at all.

Now I'm bewildered because I've played with dozens of Laptops (Windows/Linux/Mac) but never encountered such a stubborn problem (It was a lesson learned - never be too confident!!)

I'm not clear where I gone wrong? Assuming, does Acer laptops need drivers to be installed in a particular order? Sorry I'm somewhat new to this make.

Looking forward for your inputs.

Big thanks.
 

A:Solved: Acer Extensa 4630Z - Sound stopped working!

9 more replies
Answer Match 61.32%

After installing it I configured windows 8 pro build 9200 to play at the start up.
It worked. However after activating the op. sistem it no longer plays the start up sound (any idea ?).
Another thing I have no idea is why Microsoft supressed the log off sound.
Who had the brilliant idea to discontinue the log off sound ?
There should be a tweak to bring it back.

A:windows 8 pro build 9200 : start up sound stopped playing

You got the box checked ?

4 more replies
Answer Match 60.9%

Was playing music then i went afk and it stopped. Checked all wires restarted computer and no sound is coming but when i plug in my headset the music/sound is fine.

A:Sound just stopped working in Monitor

Where do you plug your headset, a socket on the monitor, or do you unplug the lead from the monitor & plug the headset straight into the computer?

If you plug into the monitor, and the headset works OK, then looks like either the monitor speakers have stopped working, or maybe a little switch in the socket has stuck sending the sound to the headset, & doesn't switch back to speaker when the headset is unplugged.

If you have to plug the headset straight into the computer, then the lead carrying the sound to the monitor might have failed, or the sound circuit inside the monitor has a problem. Or there is a hidden volume control on the monitor that has muted the monitor sound - button, knob or menu option?

8 more replies
Answer Match 59.64%

My Dad just bought a new ACER flat panel monitor to replace an existing ACER flat panel monitor. The old model had built in speakers the new one does not. I can not get any noise out of the external speakers. Please Help I'm leaving for vacation and I'M desperate
 

A:New ACER monitor, no sound from external speakers

7 more replies
Answer Match 59.64%

Very helpful forum so thanks in advance for addressing this -

I have an Asus laptop running Intel Display Audio and I have it connected to an external monitor via HDMI. I also have external logitech speakers, which for whatever reason, sound a lot better when plugged in to the monitor than the headphone jack of the laptop (which has a much muddier sound). I want to be able to play music when the monitor is off/sleep, however when I do that, obviously the sound turns off. The settings on the monitor were pretty basic and didn't see anything to change it. Is there any workaround?

A:Playing Sound via HDMI When Monitor Is Off

You could get an hdmi switch that separates out the audio. The one linked below is a example, there are cheaper alternatives too.

Amazon.com: Monoprice 4x1 HDMI Switch w/ TOSlink & Digital Coaxial Audio Output (Audio Return Channel/3D/CEC Support): Electronics

3 more replies
Answer Match 59.64%

In Windows 7 is it possible to set up my sound to play from the monitor the program is displayed? For example a movie playing on the TV would have sound come from the TV until I drag it to my other monitor where the sound would then come from my PC monitor.

All three sets of speakers work individually.
1) LCD Monitor connected via HDMI
2) LCD TV connected via audio cable
3) Headset connected via usb

Mobo: M4A89TD Pro USB 3.0
Chipset: AMD 890 FX
Audio: Realtek ALC892

A:Win 7 Playing Sound on Current Monitor

not possible since the source of the sound (your PC) remains unchanged whatever screen it's actually playing on at the time.

1 more replies
Answer Match 59.22%

I wanted a break from the HDMI sound through the monitor to use headphones, and after several other methods, I tried disabling the HDMI sound. That worked great, but now that option for playback device is completely gone! How do I get it back so I can use the (admittedly weak, but still functional) monitor sound?
 

A:Solved: Windows 7 HDMI sound through Acer monitor

Go to Control Panel > Sound. In the Sound popup screen, right-click on the screen and select "Show Disabled Devices".
 

3 more replies
Answer Match 59.22%

Hello there; first time posting here.
 
I recently accidentally installed 7zip that was bundled with adware, I uninstalled it and removed it with ADWcleaner and MBAM. I noticed that right after installing 7zip, my documentary on YouTube stopped making sound. This problem is only for Google Chrome, and affects all websites on Chrome. I googled this problem, but the only responses were to disable PepFlash. I did so, and that didn't work. 
 
I apologize if this is in the wrong category or is too vague, I've liked to think of myself a safety freak when in it comes to computers, and this is the first time I've installed something bad in many years.
 
Edit: I uninstalled and reinstalled Flash and it is working now.

More replies
Answer Match 58.8%

Today at work we were trying to do an item lookup and suddenly the screen went black with the 'no input' square on it. Like we usually do, as it happens often, we checked all the cables connecting the monitor to the PC (as closing the till often knocks the cables loose) but nothing was unplugged, and I noticed a strange sound coming from the PC that is hard to explain - sort of like a cross between a buzzing and beeping sound, in the pattern na-na-NA (I feel stupid typing this). We had to do a hard restart of the computer to get it working again, and it booted up very slowly.

We only have 2 registers at work so for one to crash at this time of year is really inconvenient. The computer that did this is also the one we use least, but I have a feeling we had to replace the PC a few months ago for something to do with the receipt printer.

I understand that since this is a work computer you can only provide limited help, as can I only provide fairly limited information about the model etc, however any help at all would be greatly appreciated as our IT guy is fairly slow on these things (and a bit dodgy).

Thanks.
 

A:No monitor input, sound playing from computer.

What is the computer? Have you tried plugging in a different monitor?
 

2 more replies
Answer Match 57.54%

The sound only works with headphones, but not without.
Have HDMI cable connected, which should support it.
I've tried many sites and many proposed solutions but they didn't work for me. Please help.

A:Dell 27 Gaming Monitor - S2716DG not playing any sound through speakers

Bump
pls help

1 more replies
Answer Match 54.6%

Hi, I hope someone can help, the crystal eye webcam on my Acer 6930g has stopped working, I dont know what I have done, it was working fine. Now when I try to start it up a box appeers saying:

Acer crystal eye webcam.EXE - unable to locate component
Thisapplication has failed to start because Image.dll was not found. Re-installing the application may fix this problem.

I have tried re-installing application but still keeps coming up with same box.

This is a real pain as I am now unable to skype my son who lives with his mum. Please Help
 

More replies
Answer Match 48.72%

So I recently opened my CPU because it was lagging and I thought maybe a little clean up might do the trick. So I softly brushed the drivers inside the CPU to get some dust off. However, when I turned on my PC, it seems that whenever I watch videos or play games, a loud crackling sound comes out from my speakers. I don't know what is causing this.

I have tried disabling my drivers (sound and display) but to no avail. However, if I mute the volume on my sound driver, the sound disappears. Which lead me to the conclusion that it might be a conflict of sound and display.

Since the problem only occured when I opened my CPU and cleaned it, it might also be a wiring problem or something.

Can someone help me on this?

A:Crackling sound in speakers when video playing/playing games/anything with graphics

Have you tried a different set of speakers? Make sure the speakers are all the way plugged into the jack.

1 more replies
Answer Match 48.72%

Hi guys,

I have a really annoying problem... I have a dual screen set up on my desktop pc, and when I open a video in any media player and move it to my secondary monitor, it automatically plays full screen on my primary monitor as well!!

It's been going on for a while now, but just thought I'd actually see if anyone can help me!

I'm running win xp pro sp 3 and my video card is ATI Radeon HD 2400 Pro... does that help?

Anyway, is there a setting somewhere that I need to address??

please help!


Jay

A:Playing videos on second monitor automatically plays full screen on primary monitor

Have you tried installing the lastest drivers? And is the second monitor spanned or cloned? I don't know here to tell you to look as I'm an nVidia guy...haven't used ATI in years.

2 more replies
Answer Match 48.3%

Started today when I opened Pro Tools. There was audio playing that sounded like a radio station. Sometimes two tracks would be played over one another and other times there would be adverts. The audio cuts out every now and then and then starts playing a few seconds or so later. In the volume mixer it is under "Name Not Available". That's all I can think of that might help sorry :/

.
DDS (Ver_2011-08-26.01) - NTFSAMD64
Internet Explorer: 9.0.8112.16421
Run by Marky at 22:13:40 on 2012-06-01
Microsoft Windows 7 Professional 6.1.7601.1.1252.44.1033.18.7659.4577 [GMT 1:00]
.
AV: Microsoft Security Essentials *Enabled/Updated* {9765EA51-0D3C-7DFB-6091-10E4E1F341F6}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Microsoft Security Essentials *Enabled/Updated* {2C040BB5-2B06-7275-5A21-2B969A740B4B}
.
============== Running Processes ===============
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
c:\Program Files\Microsoft Security Client\MsMpEng.exe
C:\Windows\system32\atiesrxx.exe
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Program Files (x86)\Common File... Read more

A:Sound keeps playing automatically. Sounds like many radio stations playing at once with frequent adverts. Cuts out frequently a...

Hello and Welcome to Bleeping Computer!!My name is Gringo and I'll be glad to help you with your computer problems. I have put together somethings for you to keep in mind while I am helping you to make things go easier and faster for both of usPlease do not run any tools unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE:... Read more

18 more replies
Answer Match 47.88%

Hi

I've been stuggling with this for a few hours now and am at the end of my wits..

I've got two audio devices that I would like to link to my PC at once.
I've got one plug connected to the back panel, and one to the front. But one always cuts off the other. In my sound devices, the system registers them both as: "speakers, VIA High Definition Audio, Standard device"

Is there any way that I can connect them both at once, and still have both of them outputting audio?

I hope the internet will save the day!

Many thanks in advance!

A:Multiple audio playing devices, playing the same sound at once

If you use realtek,
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Otherwise You're pretty much screwed, only other way is to use Virtual audio cable, but you'd have to set it up every time you booted (and it costs 20$)

3 more replies
Answer Match 47.46%

OK I need windows 7 back. 10 doesnt have a sound card driver compatible with this HP model. Was told I had to pay and/or buy windows 7 again to reinstall. I lost sound after system recovery and automatic upgrade to windows 10. Im a disabled grandma and cant afford all this. It had windows 7 on it prior so Im confused as to why I have to pay to get it back. Can anyone help me with this please? Im not computer saavy I need it for a game and I watch tv on it so sound is important.  Thanks in advance!

More replies
Answer Match 47.04%

I got a few movies and a few clips of things. but when i play it, the image wont show except for the sound. It has worked previously on VLC (I just downloaded), Windows Media Player, and the new Windows 8 Player thingo. Please help me fix this problem that ive never had before.

More replies
Answer Match 47.04%

I've posted this issue before on numerous support fourms, and none of them or I could figure out this issue. It's been driving me nuts.

A couple months ago I cleaned my computer (plugged everything out, cleaned the area/computer, etc.) when I put everything back together and booted up, I had no sound, but the tray icon indicated sound was indeed going through. As far as I knew nothing had been changed. I made sure everything was plugged in correctly, reinstalled the drivers, made sure I didn't click something off I shouldn't have, but still nothing. But then I plugged in headphones into the tower headphone jack, and boom I had sound. I was as surprised as everyone else. Someone suggested then, to rule out a hardware issue, that I download Ubuntu and see if the sound problem occurs there. It didn't, I had sound coming out of my speakers.

I would hate to re-install Win, as I've gone without doing so for five years. But if it came down to it, it's whatever.

I use the on-board sound from my MB, as I've learned over the years sound cards are a thing of the past. But perhaps I could reattach the old one I have? It's sadly over 10 years old however, I don't know if it would be worth trying. Any help would be greatly appreciated. Major cudos if we're able to figure this out once and for all. Good luck

My system:

Windows 7 Ultimate 64-Bit
AMD Phenom II X4 965
Gigabyte GA-870A-UD3 (on-board sound)
Ripjaws 8 GB
Nvida Geforce GTX 780

A:Sound not playing through speakers, but playing through headphones?

Please post a screenshot of the Control Panel/Hardware and Sound and finally the Sound Panel Playback Section.

Also a screenshot of the Device Manager, Sound section.

Screenshots and Files - Upload and Post in Seven Forums

4 more replies
Answer Match 46.62%

Hey
I own the Acer Extensa 5620Z Dual Core T2330 1GB DDR2 80GB HDD (though it only has 32.3GB on each drive)....
Never had any probs watching movie trailers, youtube and such....
All of a sudden it will sit and buffer forever and i'll be lucky to get the first 3 seconds of said video....
PLEASE, PLEASE can anyone help with my frustrations????

Regards

 

More replies
Answer Match 46.62%

How do you repair this and how did this happen?
 

A:ACER(W~1.SCR has stopped working

If you have recently installed anything (usually a screen saver program) uninstall. Don't just delete.
 

1 more replies
Answer Match 46.2%

Each time I try to play a song or video in wmp, itunes, VLC media player, InterVideo, etc. I get absolutely no sound. Videos play, I can see the images perfectly fine, but there's silence.
However, if I want to watch a video on youtube or anywhere else online, the sound works. There's got to be a simple solution to this but I can't seem to find it. Any help? I've been putting up with this for a long time and I'd really like to finally get it sorted out.
Oh and before you ask, the media players are not muted.

A:No sound when playing music or video, but internet sound works fine

Originally Posted by withherlipsonly


Each time I try to play a song or video in wmp, itunes, VLC media player, InterVideo, etc. I get absolutely no sound. Videos play, I can see the images perfectly fine, but there's silence.
However, if I want to watch a video on youtube or anywhere else online, the sound works. There's got to be a simple solution to this but I can't seem to find it. Any help? I've been putting up with this for a long time and I'd really like to finally get it sorted out.
Oh and before you ask, the media players are not muted.



Try vista codec pack:
Shark007's Codecs Homepage

3 more replies
Answer Match 46.2%
Answer Match 46.2%

My orbicam stopped working on my Acer computer which has Aspire 5100-5023 on my notebook. After looking up the solution online, here's what I did...which did not solve the problem:

Alt/F10
Hit Restore
selected reinstall applications/drivers
once it was finished, it brought me to a screen where I selected Windows vista. Here's where I think I screwed up. I had three choices to install a driver: Bison Camera Driver, Acer Orbicam Utility Bar (Bison), and Suyin Camera Driver. I've installed the first two at least 3X, and the suyin driver 1x. Nothing is working. Obviously I did not do it correctly.

I think everything needs to be uninstalled, then reinstalled, correct? If so, what do I need to reinstall? Thank you. Confused but think I'm on the right track. Thank you.
 

A:Acer OrbiCam stopped working

9 more replies
Answer Match 46.2%

Been having major issues playing GTA IV.

First, the sound kept getting cut during gaming. When I exited the game, there was no sound in Windows either. I had to reboot to get sound but after a couple of minutes, the sound cut off again and I wasn't even gaming then. Video playback became really laggy (YouTube played videos as if in slow motion) and there was no sound.

I had to reboot the PC several times. Unisntalled sound card (through Device Manager) and then reinstalled it as well as the latest drivers. Still had same issue when I tried playing GTA IV.

Today, I got consecutive BSODs while playing GTA IV. I've had several issues with GTA IV like missing textures, no sound, freezing (at loading screens), CTD (crash to desktop) etc. Tried reinstalling the game several times from scratch and even tried different hard drive but none of them work(ed).

I'm playing GTA IV heavily modded (Gionight ENB mod with several custom cars/weapons etc.) but my computer is a beast and it should be able to handle it easily.

My specs:

CPU: i7 990X
Mainboard: Asus P6T7 WS Supercomputer
Memory: 12GB Corsair Domintar 1600MHz
Hard Drive: 32GB SLC SSD x2 (RAID-0)
Video: EVGA GTX-580 3GB Tri-SLI
Sound: Creative SoundBlaster X-Fi Titanium HD
Power Supply: PC Power & Cooling 1200W
OS: Windows 7 Ultimate x64 SP1

The first BSOD was STOP code 0x124 and that was with stock clocks for the GPU. The second BSOD was STOP code 0x1000007e and that was with GPUs OC'd to 850MHz.
... Read more

A:BSODs playing GTA IV - No Sound (Sound Card) & Laggy Video!

I need you to do a stress test on your cpu with prime95 and follow this guide very carefully:

http://www.sevenforums.com/tutorials...t-prime95.html


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Administrator\Downloads\Windows7_Vista_jcgriff2\091111-25022-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*F:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (12 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`04c53000 PsLoadedModuleList = 0xfffff800`04e98670
Debug session time: Mon Sep 12 00:31:58.025 2011 (UTC - 6:00)
System Uptime: 0 days 0:00:15.350
Loading Kernel Symbols
..........................................................
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get de... Read more

8 more replies
Answer Match 45.78%

Hello there,
I recently swapped out my HD 6450 for a GTX 460 and after about two days I noticed my windows had done a auto-update and rebooting itself and was at my login prompt and my USB keyboard and mouse suddenly were not working at all the keyboard had no lights on either. I then proceeded to reboot the computer when I did this I suddenly had no signal coming from my video card. The card was still running its fan and everything else on the motherboard was running as well but no video.

I then thought it might be a video card problem so I re-installed the HD 6450 and it seems to be doing the same thing.... I have been researching every thing I can possibly find on how to fix this issue however nothing seems to work and im almost thinking the PCI-E slot may be dead however the HD6450 runs its fan directly from the mobo through the slot and when I power the computer up with that card in it the fan spins like normal.

Things I have tried so far...

1. Ensured everything was seated properly and all cords were in the proper places.

2. Reseated / Cleaned any dust off my RAM , HDD , Proccessor , all PSU cords going to mobo as well as USB cords. As well as did a mobo test by removing the RAM and booting to see if it beeped and it did ( with the RAM in place its giving me 1 short beep but thats been like that for a long time ).

3. Reset my BIOS by removing the CMOS battery for abit as well as doing the jumper reset on my mobo.

4. Ensured the BIOS had not switched to onboard som... Read more

A:No signal to monitor after installing new video card or re-installing old one . . .

6 more replies
Answer Match 45.78%

I have a new PC, the ones i used to burn off my old one would play on any DVD player I had. But when i burn using my New PC it will only play on a computer, I tried it on my friends xbox 360 and it played.
So i was thinking my TV-DVD player is the problem, but then it still plays the old things that i've burned.
I use convertxtodvd to burn the mkv files i have on my computer, I use Nero Recode 2 to copy existing DVD's into copy's.
They all work on the xbox and my PC.

It's not that i desperately need my TV-DVD player to play these things, but if i'm building a DVD collection, i want to know it will play on any DVD player that supports copies. Otherwise I end up with half a collection that will will only play on certain devices and not others that are supposed to support copies.

Thanks.
 

A:TV-DVD has stopped playing New DVD's I burn

Have you changed discs? What brand and type were you/are you using?
 

1 more replies
Answer Match 45.78%

My (ancient) Packard Bell PC (Windows XP home) has suddenly stopped playing DVDs.
Device Manager gives the '!' in a yellow circle for "H + H DVD-ROM DVD-41SD SCSI CdRom Device" x3 and HL-DT-ST RW/DVD GCC-4320B.
When I troubleshoot it tells me to uninstall and then Add New Hardware. I've tried this several times but each time I get this message:
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
I saw an old thread in which someone was able to fix a similar problem by creating a text file to fix the CD Registry. Might this work for me?
Please help...
 

A:PC just stopped playing DVDs

Is this just a DVD player or do CDs work in that Drive?
 

3 more replies
Answer Match 45.78%

My touch screen stopped working. I followed some of the advice on this forum but was unable to find the HID Touch Screen in the Device manager. I then tried to find the driver for the touch screen, but it was not there. I search Acer Drivers, but there was no driver available. Where can i get the driver for the touch screen, or find the maker of the touch screen to download it from their site.

More replies
Answer Match 45.78%

Hello
Using the above laptop my mouse pad has stopped working.
Now this may have happened when i tried an external wireless mouse by plugging it into a USB Port this works OK but if i remove it and try the mouse pad this has now ceased working.
Can any one help this elderly gentleman (80 and still going strong)
Thank you
jaysto

A:Mouse pad on Acer 5290G has stopped working

Welcome to the Forum

Make sure mouse pad is still turned on.
On the older acer to turn on or off.
FN & F7 turns off the touch pad. Not sure if it is still the same.
http://en.kioskea.net/faq/1902-disable-enable-the-touchpad. This May not be applicable to your computer, but I think that it might be.


Go to search type device manager and make sure that the driver is up to date
make sure thare are no yellow warning markers in the device manger


Try using system restore to a point, when it was working
http://www.vistax64.com/tutorials/76905-system-restore-how.html

4 more replies
Answer Match 45.78%

I just updated my Acer ES1-511 notebook (Win 8.1 x64) and my touchpad stopped working after restart.I went to the Acer driver website and reloaded the Elantech driver, rebooted, and same problem.I went to the Acer driver website and reloaded the Intel I/O driver chipset, rebooted, and reloaded the Elantech driver.Still no success. Help. Laptop is of limited use without touchpad.










Solved!
Go to Solution.

A:Acer ES1-511 Touchpad stopped working after latest...

Go to the Acer download site for ES1-511 and get the I/O Drivers from Intel and reinstall this.us.Acer.com/ac/en/US/content/drivers/5345;-;Aspire %20ES1-511Be sure to select Win8.1 64-bit as OS.












View solution in original post

9 more replies
Answer Match 45.78%

Just yesterday, several keys stopped working on my Acer Aspire s7. I have to bring up the touch screen keyboard to get them to work. They are 5,7,9,-, and a capitol D. Weirdly, the lower case d works. None of the special characters above the malfunctioning numbers work. There wasn't any spill that I know of, but it's certainly possible water got on it somehow. Has anyone had this problem? Does it sound mechanical, IE water or some other kind of damage, or does it sound potentially like some kind of virus? And in the more likely scenario that it IS a water or dirt issue, does anyone know what kind of solution might be possible? Can the keys be easily removed and cleaned? I did already try the compressed air keyboard thing. Any help or ideas are hugely appreciated! 

A:Random keys on my Acer S7 stopped working

I should also add- when I start up the computer, the password box is full of the black dots as if a key is stuck.Any advice would be hugely appreciated!Thanks guys!

6 more replies
Answer Match 45.78%

My touch screen stopped working. I followed some of the advice on this forum but was unable to find the HID Touch Screen in the Device manager. I then tried to find the driver for the touch screen, but it was not there. I search Acer Drivers, but there was no driver available. Where can i get the driver for the touch screen, or find the maker of the touch screen to download it from their site.

More replies
Answer Match 45.78%

Just yesterday, several keys stopped working on my Acer Aspire s7. I have to bring up the touch screen keyboard to get them to work. They are 5,7,9,-, and a capitol D. Weirdly, the lower case d works. None of the special characters above the malfunctioning numbers work. There wasn't any spill that I know of, but it's certainly possible water got on it somehow. Has anyone had this problem? Does it sound mechanical, IE water or some other kind of damage, or does it sound potentially like some kind of virus? And in the more likely scenario that it IS a water or dirt issue, does anyone know what kind of solution might be possible? Can the keys be easily removed and cleaned? I did already try the compressed air keyboard thing. Any help or ideas are hugely appreciated! 

More replies
Answer Match 45.78%

Ok, I think this has something to do with my screen saver. My ACER computer sits for a while and then an alarm goes off. The Message Unspecified error starts in a cascading block down the screen. After about 20 seconds another box pops up and the alarm stops. The new message reads ACER(N-SCR has stopped working. This started yesterday when I downloaded my #3 update to my windows vista 64. Any thoughts?

More replies
Answer Match 45.78%

I have read that HP also has this problem, but I have only found mixed results of success. it happened sometime after March 22nd 2015. I believe an update removed the "HID-compliant touch screen" device from device manager, it has just disappeared entirely, i have tried working with usb generic device's drivers, its not listed in there, i have tried enabling the service for HID compliant device, no luck. I have tried going to acer's website for the driver for that model, it is not there. its like they stopped supporting it. help guys, i'm stuck. i need either that driver, a third-party touchscreen software, or something short of restoring it to earlier state.

A:Acer touchscreen has stopped working after update

Open Device Manager and uninstall current monitor driver then reconnect your monitor to install Microsoft monitor generic driver.

7 more replies
Answer Match 45.78%

My computer is a Dell Dimension 8200, I have a cd/rw that came with it, so Today I bought a DVD/RW installed everything, The DVD plays video fine, The problem is, It does not have audio, so I took the dvd out and put in an MP3 Cd and it plays Audio CDs fine...I cant seem to troubleshoot any further than to play with audio level controlls but still doesnt have Audio on DVD movies, So I tried a diffrent DVD and also played it using a diffrent player...Same thing happens.No Audio on the DVDs but Audio is fine playing Music CDs on both CDRW drive and my new DVD/RW drive...I cant seem to find a thread with the same problem...I even tried uninstalling the driver on the DVD/Drive and started over again...same thing no, Audio. Help!
 

A:Audio CD Plays Sound But when playing DVDs No Sound! Help Please!

what application are you using to play said DVD?
 

6 more replies
Answer Match 45.78%

Well, i have 5.1 creativ speakers got about 2 years back. they worked fine with wxp but when i upgraded to wvista and w7 all hell broke loose. at a point in time in vista i got the rear speakers to work. when i upgraded to w7, i also got the rear speakers to work eventually. i now have a new motherboard with shitty drivers and can't get the rear speakers to work. in the tests they work but when i play music, watch movies anything nothing comes out of the front centre or rear speakers. any help guiz?
TY
p.s. the drivers my mobo uses are VIA HD Audio deck. i've tried uninstall all sound drivers and reinstalling but to no aveil
p.s. also at one point in time few days ago everything was working but the next day the rears just stopped...
 

A:5.1 Speakers rear and mid sound not playing any sound apart from test

did all the speakers sound when test in via hd audio deck or windows 7 audio control panel?

if yes, most likely you will need to enable the 'upmix' feature of VIA. I'm not sure what is it called, but in Realtek it is called Realtek Speaker Fill or Dolby ProLogic IIx. If there isn't any, you may want to try Channel Mixer for foobar2000.
 

2 more replies
Answer Match 45.36%

every single sound was somehow disabled,was after a lol game,it was ok until then,the media player was on the bg paused,then i hit play and it bugged a bit,it was showing the wrong music,like,it was p?aying pryde and joy while showing the metal in the list,then i clicked to play the metal and said it could not play it,i even tought it could be a wrong path or something,but it happened to every single music,then i said,well,the list must be screwed,i was going to create a new one and it had the same issue when i played the music direcly from the directory,now no sound at all can be played,i was using fones and and i'm still using the actually,even though they dont play anything,if you guys can help with anything i'd be glad(yes,i already reboot it)

More replies
Answer Match 45.36%

Hi there,
After installing SP2 on Win XP Pro my abbility to play music CD has gone. MP3 and webb radio work. With SP1 everything worked perfectly.

Musicmatch hangs totally when playing CD and Mediaplayer continues to respond but after one or two tracks the sounds disappears. When restarting Windows after such a problem I don't hear the normal Windows shutdown "song" but a short "ick"...

Have re-installed Musicmatch a number of times as well as CD-drive and soundcard drevice drivers.

Any idea?

I got the following hw and OS
Quite old Dell XPS T600r with Intel Pentium III, 600MHz and 384MB RAM
CD-ROM-drives:
LG CD-ROM CRD-8480C (as D)
SONY CD-RW CRX140E (as E)
Soundcard Turtle Beach Montego II (with standard Aureal 8830 device drivers since soundcard not supported any longer)

/Swehjo

A:Playing CD stopped working after XP SP2 upgrade

You didn't open your case at all did yoU?

I know lots of cd-roms come with a cable that connects to the sound card for direct audio, but if you didn't open your case or move it significantly this shouldn't be your problem.

Try going into your device manager and seeing if the cd-rom is still installed correctly. Perhaps SP2 messed it up (if so reinstall the driver)

3 more replies
Answer Match 45.36%

The title pretty much says it all - except it seems to only happen when I'm on Instagram. I've upgraded to the latest version of flash. Could it be video card related? I have other display issues with this computer.
 
Edit: it's not just Instagram, it's also Vine. I don't spend much time on social feeds, so it's challenging to track which sites seem to be most affected by this problem, which only manifested within the last month. I thought it might be a bad flash update, but as noted, I've got the most current version.

A:flash stopped playing in all browsers

Download MiniToolBox and open/run the program.When open, checkmark or select all options then click Go.A notepad will open then copy-paste the report on your next reply. Please post the computer model next time.

5 more replies
Answer Match 45.36%

Hi All

I was running MP9 and a few days ago it refused to play avi's recorded by my digital camera. It will play avi's fromother sources, DVD's etc but not my camera avi's. It playe dthem perfectly until a few days ago.

Same with PowerDVD. It will play everything, no problem, except for these few avi's.

I downloaded and ran GSpot over the suspect avi's to see if there was a codec problem but they all rendered OK and GSpot said they should play OK with the existing setup. Finally I uninstalled MP9 and installed MP10 but there is no change.

The error message I get on MP is "Unknown Error" with a code. Not surprisingly M'soft don't provide much assistance. I see from this and other forums that MP suddenly refusing to play avi's isn't at all uncommon. Can someone please offer suggestions on how/why and how I go about fixing this.

Thanks very much.
 

A:Media Player stopped playing some AVI's

Try uninstalling and reinstalling the camera software. A codec may have been installed by that installation. Anything unusual in the right-click properties of those files?

A general-purpose codec that will play most avi's is the DirectShow ffdshow:

http://prdownloads.sourceforge.net/ffdshow/ffdshow-20020617.exe?download
 

1 more replies
Answer Match 45.36%

My computer randomly stopped being able to play DVDs. It worked about two days ago so i have no idea why it's just stopped

It plays audio CDs and other disks but whenever i put a DVD into the drive it just spits it out again (its one of those drives without a tray.. you just push it in i dunno what thats called)

anyway i REALLY need to get this fixed so does anyone have any ideas?

They'd be appreciated

xx
 

A:computer stopped playing DVDs

Does it refuse specific DVDs or all of them? Have you had to reset the user zone?
 

5 more replies
Answer Match 45.36%

I was going through unnecessary files on my computer, and I deleted some Apple related files that I thought I didn't need. Quicktime stopped working, so I had to reinstall it. Since I'm using Windows XP the newest version won't work, so I had to download an older version. I'm not sure what version I had before I messed it up, I think it was 7.3.0. So I downloaded that, and now it won't play files smoothly that it had played smoothly before I uninstalled it. My settings are the same as far as I can tell.
 

More replies
Answer Match 45.36%

I've got a HP Pavilion DV6707 DVD was working fine when I upgraded it to win 7 then all of a sudden it quit. Looking for a solution I found someone who mentioned they loaded magic ISO, so I loaded the program and DVD worked fine for about a month or so and now I can't get it working. I've removed Magic ISO and reinstalled and no go. I've tried the microsoft mr fixit and no luck and I've also looked in the registry for upper filter fix and I do not see that listed in the reg any suggestions would be great. As if right now I've removed the Magic software and I don't even see a DVD player in device mgr or under computer.

Thanks in advance!
 

A:DVD stopped playing fixed it once it's back again

This may help: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01895589#N34
 

1 more replies
Answer Match 45.36%

I have to admit my guilty pleasure. I was playing Peggle at Popcap games when it stopped and went to a blue screen. The following message popped up.

***Stop 0x000000D1 (0x03021A7E, 00000002, 0X00000001, 0xBFDA8403)
*** ADDRESSBFDA84613 base at BFD6A000, DATESTAMP 3bd87e9c l tmdmnt.sys
Beginning dump of physical memory

It locked up at that point - nothing happening so I did a soft boot, got back on the internet and went straight to you guys. I had to write all this down so I hope that I got it all right.
Please tell me that there is not something wrong with my computer. HELP
 

More replies
Answer Match 45.36%

every single sound was somehow disabled,was after a lol game,it was ok until then,the media player was on the bg paused,then i hit play and it bugged a bit,it was showing the wrong music,like,it was p?aying pryde and joy while showing the metal in the list,then i clicked to play the metal and said it could not play it,i even tought it could be a wrong path or something,but it happened to every single music,then i said,well,the list must be screwed,i was going to create a new one and it had the same issue when i played the music direcly from the directory,now no sound at all can be played,i was using fones and and i'm still using the actually,even though they dont play anything,if you guys can help with anything i'd be glad(yes,i already reboot it)

More replies
Answer Match 45.36%

Today as I turned on my Aspire V3 laptop I found the system running extremely slow. Opening task manager I found RAM and Harddrive was almost running at 100%, then I checked it was McAfee scan that came with Pre-installation that is taking up all the resources. After about 10 minutes of running like this I decided to restart my computer. However after restart many system functions are no longer working. I can no longer access task manager. either CTRL+ALT+DEL or win-r wont bring it up. Tried MSCONFIG and again it wont start after I enter the keys. System restore similarly won't start after I click the bottons. There is no internet, clicking on device manager bottons won't bring up anything, driver update bottons similarly won't bring any response,  even reset to factory default botton won't work-was able to access the menu but when clicking on bottons nothing starts. - it seems as if the whole operating system is broke.  Since this McAfee program came with the Acer laptop (it literarily says McAfee Internet security -Acer on the program menu) was wondering if anyone from Acer knows about this issue and knows how to fix it. Thanks.

A:Acer aspire V3 laptop stopped working after McAfee...

Sounds like the reboot came up in safe mode. Try a shutdown, restart to see if it clears up. Rebooting while in something as intensive as a virus scan / repair is seldom safe. You should always let it continue until it's finished, even if inconvenient.

3 more replies
Answer Match 45.36%

Today as I turned on my Aspire V3 laptop I found the system running extremely slow. Opening task manager I found RAM and Harddrive was almost running at 100%, then I checked it was McAfee scan that came with Pre-installation that is taking up all the resources. After about 10 minutes of running like this I decided to restart my computer. However after restart many system functions are no longer working. I can no longer access task manager. either CTRL+ALT+DEL or win-r wont bring it up. Tried MSCONFIG and again it wont start after I enter the keys. System restore similarly won't start after I click the bottons. There is no internet, clicking on device manager bottons won't bring up anything, driver update bottons similarly won't bring any response,  even reset to factory default botton won't work-was able to access the menu but when clicking on bottons nothing starts. - it seems as if the whole operating system is broke.  Since this McAfee program came with the Acer laptop (it literarily says McAfee Internet security -Acer on the program menu) was wondering if anyone from Acer knows about this issue and knows how to fix it. Thanks.

More replies
Answer Match 45.36%

Hello, I bought Acer One 14 Z1402 notebook few days before. Windows update was made once. The touch was working fine for 2 days after update and then stopped working. I tried to update the Finger sensing pad driver software (sentelic v9.4.9.9 R4 --> current one), after that the system was restarted. Still the issue continues.Now there is error like "PC is running into problem, it will automatically restart in few moments"  then blue screen appears.

A:Acer One 14 Z1402 notebook - Touchpad stopped work...

Elangovan,
 
Try performing a refresh if you can, should that fail, a reset to start over. If you are having issues getting into Windows itself to perform the refresh/reset, here is an article that might help.

5 more replies
Answer Match 45.36%

i have an acer iconica a1. Placed card in acer tablet and lost all internet connection. Since removed card but still not working. Is it to do with the instll sd card under security?

A:put an sd card in acer tablet and stopped internet connectio

Inserting a memory card should not cause any disruption to your internet connection, so I think it was just a coincidence & something else has caused it.Try deleting the saved wireless network on your tablet, then set it up the wireless connection again.

11 more replies
Answer Match 45.36%

one night i left the laptop on because i was downloading sth ... in the morning the computer was turned off and when i tried to start the thing, it worked fine up until the screen that says "Starting Windows" (i have windows 7 btw) ... and i guess right before the desktop is supposed to show up i saw a blue screen for maybe half a second and the computer restarts by itself...well the same thing kept happening everytime i tried to start the laptop...after that i tried Safe Mode, Automatic Recovery Mode, Start at previous good config., and every other option that is available after pressing F5/F8 during startup ... since that did not work i booted the computer with my windows 7 cd and tried to reinstall the OS .... after i press "Install Windows" (or sth similar) it says "Loading setup" (or sth like that) and just stays that way --and trust me i waited long enough ... since that did not work out i got a windows XP cd and tried to install it ... it loads up well enough and rite before installation the blue screen appears again (but this time it just stays there) .... the only thing i can think of is maybe that last d/l i was talking about might have been a virus or sth .... and maybe i can resolve the problem if i could somehow load command prompt and format the hard drive (i have only one partition btw) ... i read somewhere that pressing "R" just when windows setup starts should take me to Recovery Console but that didnot seem to work ou... Read more

A:Acer aspire 5739G laptop stopped working

7 more replies
Answer Match 45.36%

Hello friends.

This is the first time this has ever happened so, I'm quite stomped. Today, my Launch Manger stopped working. In the past, an uninstall and reinstall of the product fixed the issue when it rarely occurred (only times in the past 8 years) Today, however, I've ran the full gambit of assault on uninstalling and registry clearing. I used Revo Unistaller Pro to uninstall Launch Manager and used CCleaner to clear old registry strings and and still nothing! Each time I attempt to reinstall the program, it still doesn't work.

The OSDRC and OSDRC2 folders that normally house these image files:

are now completely empty:



I've tried simply copying and pasting the files over to no avail. There's something in the coding that's not calling the proper files to be used and I have not a clue on where the hiccup is. The [Fn] function key combos still work. The process just isn't using the visual image files as indicators.

Launch Manager is listed as a start-up item in CCleaner but, it does not point to a file that's supposed to be starting..

Task Manager does not list Launch Manager as a start-up item at all.

I checked to make certain Normal Startup was selected in msconfig and it was and that didn't help. Now I am completely lost.

Acer Aspire E1-571-6442
Windows 8.1 x64-bit

A:Acer Launch Manager Stopped Working - Images Gone

Bump,

I'm beginning to suspect it's because I'm using Windows 8.1 & not Windows 7. I'm gonna test it in a VM soon. Any input would be truly appreciated.

3 more replies
Answer Match 44.94%

When I play Audio CD / mp3 files using Media Player/ Media Player Classic.. when music playing .. when I open c: .. sound distored .. sometimes will hang ...
 

A:Acer Notebook error playing mp3

Anybody know how to solve this???
 

2 more replies
Answer Match 44.94%

Suddenly I can no longer watch movies. Games play, cds play, audio fine. But I put in a movie and it's like there's no disc here. We've watched movies on it for over a year, so I checked multiple movies that once worked. I've followed the troubleshooting, tried to update driver. The wizard could find no better driver than what is already being used. I DO NOT get an error message. I just don't get anything to show up either under My Computer or in Media Center or Media player. This stumps me. I read somewhere "Security Update for Windows Media Player 6.4 (KB925398)" was a problem but I even went to add/remove programs and couldn't find that particular update, so I couldn't uninstall that. I have a gateway with a tsstcorp dvd +_ rw mlti format double layer drive and Windows XP Media Center Edition.
Thanks for any help.
 

A:dvd movies stopped playing - games, cds fine

I have an HP a1540n desktop with two R/W CD/DVD drives and two megs of RAM. Recently both drives stopped showing or copying DVDs. When I tiried to copy DVDs I get a message that advrcntr2.dll is not on this system.

I went on the internet and downloaded this .dll and put several copies in various media players and on my Desktop. Still no success. What should I do next and what might be causing this problem?

Thanks,
bhuyghue
 

1 more replies
Answer Match 44.94%

I've not long had Vista (Home Premium) and the windows media player that came with it used to play the .ts files that I'd exported from my digibox hard drive. Then - for apparently no reason - Media Player decided that it was no longer going to open the files, not even the ones that it had opened previously. It came up with the cood1199 error, but I don't understand why it's stopped playing them as it used to. It's infuriating. I don't want to have to download another program to play them when Media Player should - as it *did* - play them. Is there anything that I can do to get it to play what it used to play?

A:Media Player has stopped playing .ts files

Originally Posted by nick0116


I've not long had Vista (Home Premium) and the windows media player that came with it used to play the .ts files that I'd exported from my digibox hard drive. Then - for apparently no reason - Media Player decided that it was no longer going to open the files, not even the ones that it had opened previously. It came up with the cood1199 error, but I don't understand why it's stopped playing them as it used to. It's infuriating. I don't want to have to download another program to play them when Media Player should - as it *did* - play them. Is there anything that I can do to get it to play what it used to play?




Have you tried a system restore back to when you know this worked or is this to far in the past? Have you tried to play the files with something like Realplayer. I know that you want to use WMP long term but this would confirm that it is a WMP issue.

Also found this link if it helps.

http://www.updatexp.com/0xc00d1199.html

Regards
UKMedia

2 more replies
Answer Match 44.94%

Every time I try to play music in Windows Media Player no sound comes out of my speakers. I'm not sure if its just Media Player, but I'm fairly sure it's not just Media Player.

When this first started, simply turning the volume up a notch made sound come out. But the sound would stop after a minute or so. Also, it has been making my computer freeze up frequently. I've tried playing music on websites like playlist.com and my computer locks up.

This just started happening today. I looked for hardware conflicts and found none. The speakers work fine. I believe it must be some sort of Malware.

Here's my Log

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:48:49 PM, on 7/25/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\Dit.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\DitExp.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\slserv.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R1 - HKLM\Software\Microsoft\Internet ... Read more

More replies
Answer Match 44.94%

I Play Hd Movie Files With Ac3 [5.1 Sound] And I Have My Pc Connected To My Home Theatre....

And When I Play The Movie My Reciever Says Its Playing Pcm 44.1

And Usually When I Play 5.1 Sound,it Says Dobly Digital

And Yes I Got The Ac3 Codecs And I Can Recieve 5.1 Sound ..

I Ran The Test On My Coaxial Out From The Computer Where It Says "test 5.1 Sound" And When I Do That My Reciever Says "dobly Digital" Like Its Supposed To....but Not When I Play Ac3 Movies...

Help?\
 

A:I Try Playing Movies with AC3 sound But I Dont Get Ac3 Sound

Can you set your media player to output to SP/DIIF? It could also be that the video your playing doesn't have the 5.1 sound files included.
 

2 more replies
Answer Match 44.94%

Hello! I have a small issue. Basically, I have a Compaq desktop for about five years now. I've never had a problem with my computer before until my speakers stopped working. My computer has been soundless for two months until today when i finally purchased some speakers. I followed the instructions on how to set it up to a tee. I turned on the subwoofer and find that I still cannot hear anything. I restarted and turn off my computer twice and reconnect the sound system twice and still no sound. I just don't know what to do at this point. I'm hoping I'm missing something small and was hoping you could help me figure it out.
 

A:Sound Outlet not playing sound though the computer says otherwise

Please run this and paste the result into your next reply :- http://static.techguy.org/download/SysInfo.exe

In Device Manager are there any 'unknown devices' or items with a ! or ? next to them ?
What's listed under the 'Sound ...' entry ?
 

1 more replies
Answer Match 44.94%

It was working and then I hit something in the realtek HD audio manager by accident and it stopped working, I can't figure out how to fix it.

A:Can't hear sound through headphones, but it says sound is playing?

Not knowing what you did, all we can do is guess and try to help you.

Not sure if System Restore (back to an available restore date that is before whatever you did) will help or not, but one option to try.

Uninstalling/reinstalling the RealTek will probably do it. Actually just installing the latest RealTek will first uninstall the existing, have you restart the PC (Important step do not bypass this) and then will do a new install.

Download the latest High Defintion Codec from RealTek. Realtek

2 more replies
Answer Match 44.52%

Hi Guys
I am sure you get this a lot, but I just cant solve it
One day it worked, the next, not
It may have been an accidental FN plus another key
Have tried;
FN + F12
FN + Num Lock
Number Lock alone
All to no to avail

Pls help me, am sure its quite straight fwd

Thnx in advance guys

A:Acer Aspire 5742Z Number Keypad stopped working

Hi and welcome to TSF check the user manual from page 26 Acer | Download manual in the link

1 more replies
Answer Match 44.52%

Just ordered a brand new V15 Nitro Black Edition (Skylake). I turned it on, set up Windows 10, everything was working perfectly. I had also ordered an m.2 SSD, so I decided to pop the laptop open and install it. Installation seemingly went smoothly, but now the laptop won't boot without the power adapter plugged in. It seems like the battery must have come disconnected? Not really sure where to start, I don't see any loose cables on the inside of the case. I removed the SSD to see if it wasn't playing nicely, didn't make a difference. Help!!!!










Solved!
Go to Solution.

A:Acer V15 Nitro Black Edition Battery Stopped Worki...

I seemed to have easily solved the problem - it would not boot up on battery without all of the screws on the bottom of the case replaced. I guess this thread could serve as a quick answer for someone in the same situation though! I panicked too quickly. 












View solution in original post

3 more replies
Answer Match 44.52%

Just ordered a brand new V15 Nitro Black Edition (Skylake). I turned it on, set up Windows 10, everything was working perfectly. I had also ordered an m.2 SSD, so I decided to pop the laptop open and install it. Installation seemingly went smoothly, but now the laptop won't boot without the power adapter plugged in. It seems like the battery must have come disconnected? Not really sure where to start, I don't see any loose cables on the inside of the case. I removed the SSD to see if it wasn't playing nicely, didn't make a difference. Help!!!!











Solved!
Go to Solution.

A:Acer V15 Nitro Black Edition Battery Stopped Worki...

I seemed to have easily solved the problem - it would not boot up on battery without all of the screws on the bottom of the case replaced. I guess this thread could serve as a quick answer for someone in the same situation though! I panicked too quickly. 













View solution in original post

4 more replies
Answer Match 44.52%

Hi all,

This issue really bugs me, every few months it'll happen, one of my three screens (9/10 times it's the Acer), will display as a "Generic Non-PnP Monitor", with this it'll only display in 640*480 (usually 1920*1080, same as the other 2 screens).

This set up works perfectly most of the time, and has done for the last few years, but as I said it comes and goes. I've done a lot of research online and the best advice I can find is that when it happens if I unplug it all, and let the capacitors drain in the monitor and GPU then when reconnecting everything it'll work fine. I've done this before and it's not worked, I've also done it and it's worked. I've also had it in the past where it's just reverted back to how it's supposed to be mid use.

My set up:
OS: Microsoft Windows 7 Home Premium 64-bit SP1
CPU: Intel Core i7 3770 @ 3.40GHz
Motherboard: ASUSTeK COMPUTER INC. CM6330_CM6630_CM6730_CM6830
Display 1: SONY TV ([email protected])
Display 2: Samsung S24B300 ([email protected])
Display 3: Acer S240HL ([email protected]) <--- Displaying as "Generic Non-PnP Monitor ([email protected])"
GPU: AMD Radeon HD 7800 Series

I've got the latest drivers for all the hardware, I've got the latest windows updates for everything. I've tried older versions of the drivers for the GPU, no difference with the issue.
I've been to the Acer website to download a driver specifically for the monitor, but they haven't got one on there for this montior on this OS, j... Read more

A:"Generic Non-PnP Monitor" Acer S240HL Tri Monitor setup.

You can try forcing the install of the vista 64 bit driver, you pick update driver then follow the yellow steps and if you get the bottom picture if its unsigned just pick install anyway.

Good luck

8 more replies
Answer Match 44.52%

 Acer aspire e15 e5-571g. When i play games with the AC plugin. it suddenly stopped charging. power LED and Charging LED blinking. and when i try to play without battery only the AC. the laptop is suddenly shutsdown. but when im in normal use it charges normally. please anyone knows how to fix this. 

More replies
Answer Match 44.52%

I've had this problem since like 2 years and i havent been able to solve it, yes reinstalled OS more than 15 times, DDU drivers, reinstalled drivers, tried beta drivers, tried old driver, cleaned up the dust inside laptop, windowed, fullscreen game, disabled some services, disabled TDR on registry, delay TDR on registry (it just makes windows freeze for the time i put on the registry, example TdrDelay = 10 sec, windows freezes for 10 when TDR happens in dota), reduce dota 2 graphic settings, ccleaner, advanced systemcare, SFC/SCANNOW , verified files, (There was this time where i was messing with my pc trying to fix this issue where i thought ive fixed it because whenever the TDR happened dota 2 would freeze but it would run again like nothhing happened and i could still play but somehow then it didnt last long)

installed new version of dota 2 called reborn and for some reason it didnt crash for some 2 months and now whenever i play this new one it crashes the whole windows and i need to restart PC

There was a BSOD too where i disabled google chrome hardware acceleration or something like that and when i got to a page like dailymotion my computer froze and i had to restart.

The couple of thing i havent tried is Thermal paste because my laptop is very hard to open GPU wise. but i doubt thats the problem because the BSOD from dota started when i recently bought the Laptop like after 1 - 2 weeks

(Some stuff on the ZIP are in spanish, im from mexico)

A:BSOD playing Dota 2, driver stopped responding, etc .....

Please use the tool again, the zip file doesn't have any dump files.
Also, in your windows partition go to the folder windows. There you can find a folder called minidumps, it is the folder where the dump files are saved. Check if there are any dump files in that folder.

13 more replies
Answer Match 44.52%

Hello everyone. I really need your help. I was playing Saints Row 3. And I got crashes occasionally. And I usually got this pop-up:
Display driver stopped responding and has recovered

But this time... While I was playing, I got a BSOD. Check the attachment for more details on it. It's a .dmp file.

I really expect help, and hope someone will help me. Thanks in advance.

PC Specifications:
Windows 7 Professional 64bit
Intel Core i7-2600 CPU 3.40GHz
8GB of RAM
Nvidia GeForce GTX 560
DirectX 11

~Lightingft.

A:Driver stopped responding while playing Saints Row 3, then BSOD.

P.S. I did try updating my NVIDIA drivers. I was on the newest driver, got crashes, then updated to a BETA driver (newest). Crashes persist.

3 more replies
Answer Match 44.52%

Hello there guys, I am having a real problem with my Windows Media Player 11 playing .avi files.

My digital camera records videos and they have played on my machine with WMP no problem at all until yesterday. When I click on the file to play it it says "Window Media Player encountered a problem while playing the file. For additional assitance, click Web Help."

I have had had a good around and I can't resolve this problem. The problem seems to have occured since I installed DivX Player, Codec etc.. (the installer package). Since then I have tried uninstalling it to go back to how it was and also tried doing a system restore to the point before but still the same problem.

Don't know what to do but this problem also effect Windows movie maker, it won't player the avi files in there either, please help.

I am running Windows Vista Home Premium
 

More replies
Answer Match 44.52%

Hi,

I am trying to play a DVD movie that I burned about a year ago. It has always worked previouly, but now when I try to open it from Autoplay or from Computer, I get a message telling me that Windows Explorer has stopped working. Can you help me with this one?


As always, thank you and
Best Regards
Powell Lucas

A:Windows Explorer has stopped working when playing movie DVD

Good Evening Folks:

I am having a problem with Windows Explorer and WMP11. I have the original King Kong movie that I downloaded and burned over a year ago. Every so often I drag it out just for the enjoyment of watching it again. This time, however, when I attempt to play it I get a message telling me that WMP11 has stopped working. If I try to open the files on the disk the message tells me that Windows Explorer has stopped working and will have to restart.
When I first started to dig into this problem I was because I was getting a message telling me that the DEP had stopped working. That has been cured by disabling DEP, but now it is Windows Explorer that stops working. There are also a few other glitches that have appeared such as a language bar that appears on the screen whenever the UAC window opens and an internet connection that will not run in protected mode even though that function is enabled. I have scoured the net and have seen a number of people who associate this problem with the installation of Vista SP2? If this is the case I will dump SP2 even if it means reinstalling the O/S.
I'm running a 32 bit Vista Home Premium O/S.
Any comments will be greatly appreciated.
Regards
Powell Lucas

12 more replies
Answer Match 44.52%

So I get TDR and BSOD whenever I play a graphically intensive game. Doesn't have to be much, though. I tried to play Mafia 2 and I got TDR. The same with Dishonored, CS:GO, and a whole mess of other games.
I've already set the PhysX to my graphics card rather than auto, so if you were going to say that, don't.

Note: My GTX 660 is by OC'd by Gigabyte, thought I'd point that out.

A:BSOD/TDR playing Far Cry 3, display driver stopped working.

Erm, this doesn't make sense. You have a Geforce card, so why do I see ATI drivers also loaded? You may wanna do some cleanup of your drivers to ensure you don't have any conflicts. A good way to see loaded drivers is using Autoruns. Don't use it to remove drivers, but to check a list of those intended to load at Windows startup. Also good is to check Programs & Features on control panel and uninstall unnecessary items.

Otherwise, I don't have good data on this. One of the 3 crashdumps present did report that the TDR timeout was caused by insufficient resources to complete a DirectX API call, but I can't ascertain how this happened from just a minidump. Try running Driver Verifier and provide us new crashdumps.

EDIT: I just noticed the ATI crash was from back in Oct, with two other crashdumps from Nov and December. Have you changed your video card recently? I assume you were also getting timeouts from the previous card?

7 more replies
Answer Match 44.1%

Please help me solve this problem, it is really annoying. I tried to access Acer ePower Management but there was an error "... stopped working". Then this error message appeared "WMIServi Application has stopped working".

---

Here is a log file for reference:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 1:45:45 AM, on 21/1/2011
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v9.00 (9.00.7930.16406)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\Windows\RtHDVCpl.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exe
C:\Acer\Empowering Technology\eDataSecurity\eDSLoader.exe
C:\Windows\System32\hkcmd.exe
C:\Windows\System32\igfxpers.exe
C:\Program Files\Alwil Software\Avast5\AvastUI.exe
C:\Program Files\RocketDock\RocketDock.exe
C:\Program Files\Nokia\Nokia PC Suite 7\PCSuite.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\SpywareGuard\sgmain.exe
C:\Program Files\TimeLeft3\TimeLeft.exe
C:\Windows\system32\igfxsrvc.exe
C:\Windows\system32\taskeng.exe
C:\Users\sarah\AppData\Local\Google\Update\1.2.183.39\GoogleCrashHandler.exe
C:\Users\sarah\AppData\Local\Temp\RtkBtMnt.exe
C:\Program Files\SpywareGuard\sgbhp.exe
C:\Program Files\Pidgin\pidgin.exe
C:\Program Files\Axantum\AxCrypt\AxCrypt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox\plugin-container.exe ... Read more

A:[SOLVED] WMIServi Application Has Stopped Working - Acer Aspire 4710

If this is a recent problem, start by doing a System Restore..

2 more replies
Answer Match 44.1%

Help!!! yesterday it still working but today,no sounds come out from the speaker,I used headset to test it and it's work,but when I unplug my headset it still no sound,I already try to reboot using safe mode but getting confused.. what can I do???
f.y.I : I already check the sound driver,no question marks appeared.
 

A:My Acer Aspire 4741G laptop sounds suddenly stopped working

"I already checked the sound driver, no question marks appeared"... Do you mean no exclamation points like this (!)? If you can hear normal sound from the headset the sound driver is okay. This could be caused by a keyboard setting. Make sure the sound is all the way up and that it is not muted
 

9 more replies
Answer Match 44.1%

Any other suggestions? I emailed gateway about the problem a couple of weeks ago and they sent a link to reinstall the driver and it worked for a few weeks. Then a couple days it started getting crackly again so I reinstalled the driver and it was fine...but now this past week it's been doing it like crazy and now it seems like it's not even taking to fixing it for more then like 10 minutes.

Is there anything else I can do before I have to send it into Gateway AGAIN!
 

A:Re-installing sound driver no longer helping crackly sound

You could always buy a sound card. I'm assuming you're using an onboard one right now, so if you buy a sound card you'll have better quality sound, if you buy a good one, and it could speed up your games a bit, if your CPU is the bottleneck, since the card does the soundwork instead of the CPU. But if you don't want to do that you could try reinstalling windows. If that doesn't work you'll probably have to send it back to gateway.
 

2 more replies
Answer Match 43.68%

Hey guys, I am new here but i have been having problems with my laptop while gaming( league of legends and i have even tried it on lowest settings possible) for months. I have tried everything. Any help or advice ? Thanks in advance.

Here is my dmp file.

A:BSOD While Playing League Not Less Than Or Equal. Windows 7 ACER

Bump

5 more replies
Answer Match 43.68%

I've encountered a mysterious problem that has drastically affected my enjoyment of my computer. Please help if you can.

Starting yesterday, I noticed that most video files (about 90%) stopped playing correctly on my computer. This occurs whether the video is streaming from an internet source or played directly from a file on my hard drive.

The affected files are .avi, mpeg, mpg, wmv, asf

When played the files are slow and choppy and the sound is full of pops and cracks. Video files without sound and audio files seem unaffected.

This occurs when files are played through Windows Media Player (10) or RealPlayer (v.10). Quicktime Player appears to be unaffected. The same file will play fine if it has an extention QT can handle.

The files themselves have not been corrupted. I was able to prove this because I can play the very same files remotely with the same programs (WMP10 and RP10) from a second computer on my Home Network.
Also, files streamed from the internet are affected as well. For example if I try to watch a news video or a moive trailer the sound is significantly degraded when played through WMP or RealPlayer.

So, something has changed with my windows setup that is affecting the way the computer handles these files.

I had a virus issue that I dealt with by running many spyware and virus programs yesterday. I don't think it's related but I can't help but wonder
( See Help! undeletable files under SECURITY for more info. )

To fix the proble... Read more

A:Solved: HELP!Video files stopped playing correctly on WMP and RealPlayer

16 more replies
Answer Match 43.68%

I've been trying to chase this issue for quite some time now. Randomly I experience a crash to desktop when playing Battlefield 2. Doesn't seem to have any rhyme or reason, just bam!

The only thing I can spot in the logs is one in system saying: (Happens Everytime)





Quote:
"The PnkBstrB service entered the stopped state."


There is also one that will show in the app log saying: (Happens once in awhile)





Quote:
"Faulting application name: bf2.exe, version: 0.0.0.0, time stamp: 0x4a8d6629
Faulting module name: Memory.dll, version: 0.0.0.0, time stamp: 0x497ec791
Exception code: 0xc0000005
Fault offset: 0x00001ddc
Faulting process id: 0x600
Faulting application start time: 0x01cd07d8b8b64218
Faulting application path: C:\Program Files (x86)\Origin Games\Battlefield 2 Complete Collection\bf2.exe
Faulting module path: C:\Program Files (x86)\Origin Games\Battlefield 2 Complete Collection\Memory.dll
Report Id: 23819cc8-73cc-11e1-a8f9-000854b19d94"


I've attached the needed dumps as requested. Hope someone out there can help.

System:
Win7 Pro x64
AMD Athlon 6000
Nvidia 8800 GTS x2
onboard sound
cant remember the board.

A:Crash to Desktop when playing BF2. (PkBstrB service entered stopped.)

I found this section from the following user request.

http://www.sevenforums.com/crashes-d...ows-crash.html

4 more replies
Answer Match 43.68%

I installed a Sound Blaster Audigy Fx to run digital communication with my ham radio gear. After installing the SB the original IDT ports don't work. The IDT does not show in the Deives Manager. I tried down loading the IDT drivers but got a message not compatable and download failed.  I have done this on other HP computers I have owned with no problem.Thank you any help you can give me. LarryC4 

A:On board sound gone after installing Sound Blaster Audigy Fx...

Hi: See if your BIOS has an onboard audio setting. If it does, it may have automatically gone to disabled when you installed the add on video card. Check the options you have for the onboard audio setting. If it is on Auto or Disabled, change it to Enabled, save the setting where you made the change, and again when you exit. The sound should work on both devices then. And if the audio card doesn't work with the onboard audio setting on enabled, then change it to Auto if the onboard setting had been on disabled.

1 more replies
Answer Match 43.68%

Hi guys,

I decided to purchase a Samsung LED monitor and have connected it up to my pc using a HDMI cable. I recieve the picture on the screen but no audio, been spending the majority of today trying to solve the issue but have landed short.

My set up is a AMD A10-5800K APU, 8 GB ram and using windows 7 64 bit. The monitor I purchased is a Samsung LED monitor T32E310EX.

Currently the speaker symbol has an x next to it, when I click it it tries to fix the problem. When I right click it and go to playback device it shows Digital Audio HDMI (High Definition Audio Device) as my default device but no sound bars next to it. If anyone could help me out that would be great thanks

A:New monitor, HDMI connection between Pc and monitor but no sound

Have you configured your speaker setup to use Monitor Speakers rather than external speakers?

1 more replies
Answer Match 43.68%

I installed a internal sound card months ago when my original ports on my PC stopped working. Just recently sound started coming from my monitors built in speakers and not my sound card.
I purchased a new sound card to no avail. I still get static and no sound and control panel says device is working properly.
What is going on it has to be something simple I am looking over.
Help please.
Thanks
Dave

More replies
Answer Match 43.68%

I am trying to find out why I am blocked from install WIndows 7 Pro 32-bit. Please advise.

More replies
Answer Match 43.68%

Just getting loads of windows update errors. I have 2 updates that haven't installed for about 3 months, and now there's 6. It just keeps building up! What can I do? I'm really worried.

here's some screen shots

A:HELP! Update's have stopped installing!

I just worked on a system the other day that had the same issue, couldn't install any new updates (12 were pending). I went back to a restore point a month earlier and now everything works great. Might be worth a shot to try a system restore point.

8 more replies
Answer Match 43.26%

Hi there,

This morning my laptop keyboard started playing up - ten of the keys have stopped working altogether (as far as I can tell anyway - there may be other function buttons not working but there are ten of the alphabetical keys not working - these are A C D F G H M N S X) Oh, and having just checked the , . / < > ? and CAPSLOCK keys aren't working either ... balls.

Obviously this is quite irritating as it makes the keyboard unusable - I've looked around and can't see any obvious solutions online. I've had no spillages that would cause this or any bumps or anything that I can recall .... I've plugged a USB keyboard in for now to make this post but obviously that's not ideal either.

I'm stumped so wondering if anyone could offer a bit of advice or inspiration!

Log details:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 2806 Mb
Graphics Card: Intel(R) HD Graphics, 1275 Mb
Hard Drives: C: Total - 225060 MB, Free - 61419 MB;
Motherboard: Acer, ZQ1B
Antivirus: AVG Anti-Virus Free Edition 2013, Updated and Enabled

Cheers in advance!
 

A:Acer Aspire Timeline X 4820 laptop keyboard playing up!

You could try removing and reconnecting the keyboard as the connector may be partly loose; I've seen that on many models and Dell and Lenovo both had entire lines of laptops where the connection would just come loose and simply had to be reconnected.
 

1 more replies
Answer Match 43.26%

I am a novus at this so I really need to know, I looked on previous post and read something aboiut setting my DDC/CI to OFF. Where do I look for this setting???
 

More replies