Tech Problem Aggregator

Solved: Wireless Doesn't Work! What driver do I need?

Q: Solved: Wireless Doesn't Work! What driver do I need?

Hey guys,

Yesterday I formatted and reinstalled windows Vista on my new Dell Inspiron 1720 laptop. I've gone through the whole driver CD, installed everything there, but wireless still doesn't work! It doesn't find any networks. I realize that the drivers CD just has the default 1720 drivers, so some things might be different (for example, the default video card is 8400, but mine has an 8600, and the driver for that isn't on the CD). Perhaps I require a different wireless driver?

If that is the case, how do I know which one I have and where to get the propoer driver for it?

Any help is appreciated!

Thank you.

A: Solved: Wireless Doesn't Work! What driver do I need?

http://support.dell.com/support/dow...D=INS_PNT_PM_1720&os=WLH&osl=en&catid=&impid=

3 more replies
Answer Match 72.66%

Got a new tablet pc. Put in a new hard drive and installed vista ultimate x64. Works great. I was suprised how much smoother it runs.

The 11a/b/g/n wireless LAN Mini-PCI Express Adapter isn't recognized by vista. My friend said it might be a problem because it doesn't work with 64 bit software. Went through the long process of installing vista 32 bit version. Same thing. It was recognized by vista.


So now here I am with 64 bit vista installed again. I downloaded a couple drivers that it could be from lenovo website. It still didn't work.

Before I started this whole project I went to the microsoft upgrade site to check compatability. While running XP, the site said that I would have to download the wireless lan driver and install it after i installed vista. It also said the fingerprint reader would need to be manually installed but I don't care about that.

Any suggestions?

A:IBM Lenovo X60t Tablet Pc wireless card driver doesn't work after x64 Vista

Hi davIbus

Have a look here;
Lenovo Support & downloads - Wireless LAN ThinkPad 11abg, abgn, bg, bgn for Windows Vista 32-bit and 64-bit- ThinkPad

Download using the file link

I hope this helps

Pooch

3 more replies
Answer Match 72.66%

My problem is that I cannot access the internet through my LAC. I enable the connection and it will connect and send packets, but will not receive any packets. I have no problems enabling my wireless connection and connecting to the internet. The wireless does like to disconnect and reconnect about 3 or 4 times an hour which is another problem I have. I believe this LAC problem started around the same time I was trying to get shared music between my computers on iTunes. I was trying to allow for connection on port 3689, but everything I did was unsuccessful. Any suggestions for any of these problems I'm having?
 

A:Solved: Local Area Connection: doesn't work, Wireless: does work

16 more replies
Answer Match 68.46%

I have a D-Link DWL-520 V. E1 wireless card and want to install it in a computer running Windows XP. D-Link does not give technical support for this card but does have the driver for download on their website.
I downloaded the driver for WinXP and clicked the setup icon to install and it installed the Utility program but never produced the screen to install drivers like the manual says it should. Is anyone familiar with this and know why I can't install the driver? The utility does me no good if the driver is not installed.
 

A:Solved: Wireless card doesn't work

http://support.dlink.com/supportscope.asp DLINK Support

http://support.dlink.com/products/revision.asp?productid=DWL-G520 Revisions of D-Link

http://support.dlink.com/products/view.asp?productid=DWL-G520 Information on your particular product.

Up at the top of the page there is a contact number -

Hope this helps...Jazz
 

2 more replies
Answer Match 68.46%

My wireless adapter connects fine when my pc boots except if I try to download a large file or run a full screen program that uses connection, the adapter stops working and won't detect any networks, if I try to configure it when it doesn't work...my com will turn itself off and turn back on. I downloaded a newer driver, resetted my router, but the problem is still there.
 

More replies
Answer Match 68.46%

here's my problem, as near as I can tell,

a few months ago the wireless connection on my hp laptop stopped "seeing" my wireless network. Eventually, during a scan with my panda security system a virus was found (for some reason it is no longer in the logs-but is was, I think, trojan or sasser in my outlook folders-and it was deleted). The wireless seemed to work again but then went back to being "invisible" to my wireless detector on the laptop. I went to HP downloads to see if I could just update the "driver" and ended up updating "system bios" which seemed to work also, for a while, then the system goes back to not seeing the wireless. I could sometimes do the right-click "repair" option to get it to connect but that stops working after a while. I think that there is still some residual virus lurking in the system to cause this problem so that is why I am posting here. Thanks for any help you can give

I am not exactly sure if this is where I attach the dds.txt text but will put it here just in case:

.
DDS (Ver_2011-06-23.01) - NTFSx86
Internet Explorer: 7.0.5730.11
Run by Victoria Jerome at 22:11:58 on 2011-06-23
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.990.170 [GMT -6:00]
.
AV: Panda Internet Security 2010 *Enabled/Updated* {4570FB70-5C9E-47E9-B16C-A3A6A06C4BF0}
FW: Panda Personal Firewall 2010 *Enabled*
.
============== Running Processes ===============
.
C:\WINDOWS\system32\svchost -k DcomLaunch
... Read more

A:internal wireless doesn't work (computer doesn't see my wireless anymore)

Hello, Welcome to TSF.
I'm nasdaq and will be helping you.

You may wish to Subscribe to this thread (Thread Tools > Subscribe to this thread) so that you are notified when you receive a reply.

Please read these instructions carefully and then print out or copy this page to Notepad in order to assist you when carrying out the fix.

Note that the fix may take several posts. Please continue to respond to my instructions until I confirm that your logs are clean. Remember that although your symptoms may vanish, this does NOT mean that your system is clean.

If there is anything you don't understand, please ask BEFORE proceeding with the fixes.

Please ensure that you follow the instructions in the order I have them listed.

Please do not install or uninstall any programs, or run any other scanners or software, unless I specifically ask you to do so. Also please copy and paste logs into the thread, rather than add them as attachments.
===

Please download ComboFix from one of these locations:

Link 1
Link 2

* IMPORTANT !!! Save ComboFix.exe to your Desktop
Disable your Anti-Virus and Anti-Spyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools
Double click on ComboFix.exe & follow the prompts.
As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this ... Read more

11 more replies
Answer Match 68.04%

I have Win 7 and Win 8 dual booting on my brand new Dell Vostro laptop. The wireless works beautifully while using Win 7, but when I switch to Win 8... the actual Fn+F2 wireless switch has no effect whatsoever!! So I know the machine is OK, the network is OK, but what could be making the machine act differently under Windows 8??? Device manager and details say the driver is up to date.. What do I look for next?? I don't think I'm going to be able to get a call through to Microsoft!!
 

A:Solved: Wireless works in Win 7 but the switch doesn't work in Win 8

Dell Vostro laptopClick to expand...

do you have exact model and service tag number- should be on a label on the PC
 

3 more replies
Answer Match 68.04%

This happened today after I turned the laptop off. I tried editing the registry, turning off iphelper and ipv6. Here are the specs.
I hope I can solve this. Any help would be greatly appreciated.

Windows IP Configuration

Host Name . . . . . . . . . . . . : test-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : gateway.2wire.net

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : Broadcom 802.11b/g WLAN
Physical Address. . . . . . . . . : 00-1A-73-7F-00-02
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::cdd1:5e4a:33e8:9ee6%10(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.158.230(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.1.254
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. . . . . . . . . : 00-16-36-E7-22-07
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 6:

Media State . . . . . . ... Read more

A:Solved: Wireless doesn't work, it says identifying network.

16 more replies
Answer Match 68.04%

Hello everbdoy , thanks for entering

I was using XP ,and Wireless was working well , until I used ubuntu 4.10 !!

( sign became so weak ) (only with XP)

and It's taking too much time to connect with modem !!


now I am using wired (cable) with Xp

and wireless with ubuntu !!

((((I want to use Wireless with both)))

I have (speedTouch) modem


could you help me ?!
 

A:Solved: wireless works with ubuntu, doesn't work with XP(help me)

you have marked solved - do you need help

dont really need those images - just exact make and models and versions of software and any useful links to manuals etc

Images are useful sometimes, but not sure why you posted these
 

2 more replies
Answer Match 68.04%

ok im trying to connect my 360 and i have everything perfect except for when i bridge My computer will kick me off of my wireless network so
IN this picture my network is perfect when no bridged


but then see in the below pic when bridged it wont let me connect

 

A:Solved: Wireless network doesn't work when bridged

Is this solved now? If so, great! Other people have been having bridge problems, so your solution may help others.
 

2 more replies
Answer Match 67.62%

Ok, so I've re-installed Windows XP (SP2) and after it booted up, I noticed that my onboard ethernet adapter wasn't recognised. So I went and downloaded the appropriate drivers (SiS900.zip) from the mobo's official site (it's a PCChips M848A mobo) but when I try to install the drivers, it still says that the hardware isn't functional (Code 1).

I've tried many different versions of SiS900 drivers but it simply won't work.

When I tried the setup.exe file that came with the official driver, the install would say "Update Driver for PnP Device Fail. Setup will exit".

That's when I simply forwarded the windows hardware installer to an XP folder i found in the zip file. But still, it doesn't work.

I really need help on this matter. Thanks in advance...

EDIT: Maybe it's worth mentioning that I re-installed WinXP over an existing windows partition without formatting it. I simply deleted the former windows installation files.

A:[SOLVED] On-board Ethernet Adapter Driver Doesn't Work

Have you tried directing the driver to install from SiS900\WinXP\netoem.inf ?

Go into your device manager, right click the device under network adapters and click update driver. From there direct it to the aforementioned file.

6 more replies
Answer Match 67.2%

Hi,

My computer is connected to my wireless network and outlook is working fine, but when I open a webpage it takes ages, and then loads only the words. However when I open command prompt and ping the website it does get it.

Please help.

Thanks so much.
 

A:Solved: Internet doesn't work, although it's connected to the wireless network.

8 more replies
Answer Match 65.94%

Hi Guys,

I have a win7 desktop upstairs with all of my media on it. I also have a winXP laptop that I would like to use as a media center running xbmc connected to my tv downstairs. I have set up a workgroup so my laptop can access the media stored on my desktop and everything works great when they are both hardwired to my router (Linksys E3000). However, as soon as I unplug my laptop from my router and switch to the wireless connection I can no longer ping my desktop or access the shared folder (internet still works fine on the laptop, it just cant see my desktop anymore). If I plug it back in to the router, everything works again.

I have checked a lot of forums but haven't found anyone who really seems to be having the exact same issue as me. This one seems to be the closest I can find however I tried most of the solutions mentioned there without any luck. I would love some fresh ideas if you have any, very close to just saying forget it and buying a new router (if that is even the issue but it's all I can think of).

The exact error message I get when I try to access the shared folder is "\\INFINITY\Media is not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found."

Thanks for any help, laptop specs are below.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Serv... Read more

A:Solved: Workgroup works great when hardwired to router, doesn't work over wireless

16 more replies
Answer Match 64.26%

i just did a clean install of xp on my acer laptop, it has a atheros ar5005g wireless chip in it. i downloaded the driver from the acer website, i installed the driver, but on control panel it stills comes up as a yellow question mark (network controller). i tried google for other versions of the driver tried them still the same.
 

A:Solved: in built wireless driver doesnt work

15 more replies
Answer Match 62.16%

Dear all,

I thought I have met this problem before before my two wireless adapters both stopped working.

PCI-E INTEL 5300
TP-LINK WN821N

My case is a little different from those I found on this forum.

1. When I upgraded my thinkpad x200 to win7 64bit, I don't have "Wireless Network Connection", but I fixed it by stopping one setting of Kaspersky and it came back, so when I first found my PCI-E wireless didn't work, I thought the same thing happened, although I didn't remember the details, I tried the Kaspersky, don't work.

2. I updated the drivers, uninstall-install, start-stop-start WLAN AutoConfig... I have done a lot that can be searched on line, never worked for me.

3. Tragedy happened, I adjusted several common options on BIOS, then after several tries I made to make 5300 work, USB wireless died Don't know how to recover it, and back to my laptop again.

Could anyone here help me out? Really appreciate it! I have spent two days on this stuff, if no one can do this, I guess the only way is to reinstall the OS, that's the least thing I want to do.

Thanks!!!!!!!!!!!!

Mic

PS: Unavailable wireless adapters have all zero Mac addresses, also can't be found in control panel.

A:PCI-E intel 5300 wireless doesn't work. Then the USB wireless adapter

Problem solved. Thanks anyway.

2 more replies
Answer Match 59.64%

I recently bought a C.D. and wanted to upload it to iTunes and put it on my iPod, but it would not load. I thought, "Oh, it must have a security thing." So I tried it in a C.D. player. It worked. I tried once more with the computer, and it failed. The driver shows up. But there is no C.D. I even tried another C.D. to see if it was just the one I had bought, but it wasn't. Any ideas?

A:My CD Driver doesn't want to work.

Hi lol_alex_lol30 and welcome to TSF

I can help you with some basics, but you will need to check further to get all the data you need, as I don't upload to iTunes.

I'm assuming you bought an audio CD. I'm also assuming that iTunes would like to see MP3 audio files....You will need to find that out. This though, is true. When you burn an audio CD from music files, those files are most likely in the form of WAV on your harddrive. They are burned onto the CD with a .cda extension and are named track 1, track 2, etc. The song names are not shown on the CD if you view it with Windows Explorer.

Extracting songs from an audio CD to harddrive is called ripping the song. Songs end up on your harddrive in the form of "songname.wav". songname will be Track1, Track2, etc. and you will have to rename each to have the actual song title associated with the song. WAV files are quite large and about 24 songs is the maxium that you can burn onto an audio CD.

Mpeg level 3 (MP3) is a compression specification that can be used to make much smaller audio files. A 20,000,000 (20 meg) WAV file will compress into a MP3 file that is about 2 meg or less. A file that is 10 to 11 times smaller than the WAV file. I'm sure you can appreciate the fact that small files upload much faster than very large ones. Also you can put about 240 mp3 files on a CD, but only about 24 wav files. You could also appreciate that your ear can't tell the difference between the sound of... Read more

4 more replies
Answer Match 59.22%

i have the same problem as u except my wireless doesnt work period
 

A:Wireless doesn't work

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Note: You will need to post complete details of your configuration and your specific issue in this new thread for us to help you.

Thanks for your cooperation.
 

1 more replies
Answer Match 59.22%

Hi,
I?ve got some problem with my W-LAN device. Recently I?ve got a strange feeling about it because some things didn?t work correctly, so I decided to reinstall the driver. It didn?t work directly (I don?t know why), so I tried to uninstall it first, to install it again. Now I got this message:

This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

An update for the latest driver was useless because I already got the latest one. I tried both installing it from the device manager several times, which failed everytime with this message to come, and by the driver setup (there is a folder available on my computer with all drivers installed on it), which seemed not to have any effect, although it said "Installation complete". Has anyone a solution for me?
I?m going to reinstall my Windows soon, but it?ll take some weeks to that. But until that, I need my W-LAN to work again!
I?ve got Win 7 Home Premium 32bit, my W-LAN device is a Broadcom 802.11g, my notebook is a Lenovo G550.

Thanks for any help, Bennington

A:Reinstallation of W-LAN driver doesn't work

First go into Device Manager (right click on Computer and choose properties, then Device Manager), then go ahead and delete the Broadcom device under Network adapters. Then try and install only the most recent Lenovo supplied driver for your laptop model. Let us know how that goes...

6 more replies
Answer Match 59.22%

Hello,

In Windows 7, I am trying to figure out if I have any faulty drivers. I have been having BSODs for a while, and I've removed RAM etc. So the next step was to test drivers.

But I can't run Driver Verifier. No matter which drivers I select, the Driver Verifier causes a blue screen as the windows 7 logo starts to come together. I have to clear the settings in Safe mode to get it back.

Is there any way to fix this, or any other way to check my drivers?

(My most recent BSODs have said caused by dxgmms1.sys and tcpip.sys -- lots of IRQL_not_less_or_equal and system_thread_exception_not_handled.)

A:Driver Verifier Doesn't Work...

The purpose of Driver Verifier is to cause a Blue Screen of Death.
Analysis of the memory dump files will then (if it's worked) let the analyst know what driver caused it.

You'll know this because there will be a Driver Verifier Enabled memory dump.

FWIW - I had a system at work today that would spit out the IRQL error messages, but not the Driver Verifier Enabled error messages. I finally enabled all settings in Driver Verifier and then rebooted. An hour and a half later the system was still booting with the Windows 7 splash screen.

The point here is that the settings that you use in Driver Verifier are critical - and are determined by the type of BSOD events you are getting (for example, if you have BAD_POOL_CALLER errors, then you want to enable the POOL checking options in Driver Verifier).

Please zip up the contents of the C:\Windows\Minidump directory and upload/attach the .zip file to your next post.

19 more replies
Answer Match 59.22%

Every time I start up the computer, my video card stops working. When I look in Device Manager, it shows the video card there, but with an exclamation mark by it which means it's in a 'problem state'. I can fix it by reinstalling the driver, but I have to do this every time I turn it on! How do I make it work every time?
 

A:Driver doesn't work on startup???

8 more replies
Answer Match 59.22%

hello

please anyone know how to make this driver work under windows-7 64-bit or vista>

it works fine under 32-bit>

i think it's easy to edit this driver to work under 64-bit or maybe there is another solution that i don't know>

thanks in advance>

A:Psx Driver for ps controller doesn't work

Hello TheEvil

You might want to checkout the Windows 7 Forums for all things Windows 7

Peace

1 more replies
Answer Match 59.22%

Dear Sir,
yesterday I installed windows 7 home premium x64
Before installing nvidia driver it runs well with windows default video performace (800x600).
But after installing nvidia driver, it doesn't work perfectly
MY problems after installing nvidia driver
1. It runs well before showing the start up window (welcome window where I have to entry my password)
2. But when I run the windows in safe mode it works perfectly
3. You can say that it is for driver problem / driver software problem. But I used the driver in the previous windows 7 home premium x64
If you need anything related with my problem, then comment in down
Thanks.

A:Doesn't work video driver

Hi rx123yz. Your issue sounds like that Windows have installed its own drivers over new ones that you installed. Remove all the old drivers and use Driver Sweeper. This little software removes all the bits of the old drivers. Below is the link to download the S/W. Before uninstalling the old drivers, download the latest drivers for your card from Sevenforums or from Nvidia site and install them after uninstalling and sweeping off the old drivers with driver sweeper.

Driver Sweeper Download

Keep us posted.

3 more replies
Answer Match 58.8%

I've been having some problems with my ethernet for the past few days. The computers hooked up to wireless routers are fine, so it's not a problem within the computer. However, when I hook up an ethernet cable to the modem, there's a "limited to no connectivity" message on my computer, and when i click to repair it mentions something about the IP adress. My Xbox 360, which is also dependent with the ethernet cable, says basically the same thing when i run tests on that. If anyone can help, it would be appreciated.
 

A:Ethernet doesn't work, but wireless does

12 more replies
Answer Match 58.8%

I think I may have deleted a necessary file for my wireless internet to work. Every time I try and search for a wireless network it comes up with this message:

Error loading C:\Windows\system32\van.dll
C:\Windows\system32\van.dll is not a valid Win32 application

Is there any way I can get the file back? Download it or something?

Also, every ten minutes or so a pop-up comes up at the bottom of my screen saying that my Recovery drive is full. What can I do about this?

I have a Dell Vostro 1500, and Windows Vista as the operating system.

Any help with be so appreciated! Thank you so much!!
 

A:Wireless Network doesn't work! Please help!

See error message:
http://www.tech-forums.net/pc/f9/missing-van-dll-176373/

Recovery problem:
http://en.community.dell.com/forums/p/19255756/19422198.aspx
 

1 more replies
Answer Match 58.8%

If I don't connect the wire from the router to my computer, Firefox says that the server is not found. The internet only works when its connected to the router. I have Windows Vista. This has never happened before and I was wondering if you could help me. Thanks!

A:Wireless Internet doesn't work

Hi please go to device manager and look for any error flags ie yellow ! or red X

4 more replies
Answer Match 58.8%

I do not have an option right down there to connec tot a wifi i can only connect via wire, it doesnt serach for wifis (i just installed windows 7). It's an hp pavilion g6. I tried installing the wifi adapter from their website BUT as soon as i start the setup it closes by it self :/ please i need help

A:Wireless doesn't work on my hp laptop

Sometimes you have to install the HP wireless manager crapware in order to turn it off in its Preferences so you can use Win7's superior wireless manager from the bottom-right System tray.

But first try rightclicking the System Tray Network connection icon to Troubleshoot, choosing wireless adapter. If that doesn't work correctly, go into Control Panel>Network/Sharing Center>Change adapter settings to rightclick on Wireless adapter to Troubleshoot. If it doesn't appear install its driver from the HP Support Downlloads webpage. Driver Install - Device Manager

Did you follow the other Best Practices to get a perfect Clean Reinstall - Factory OEM Windows 7?

2 more replies
Answer Match 58.8%

The Wifi key light remains amber (orange) no matter how many times i press it . It only turns on and off the bluetooth. I have installed the Drivers from HP's site. The wireless lan card is not visible in device maneger . It only shows the ethernet port and the bluetooth. even after choosing the show hidden devices the wlan wasnt visibleI am checked the bios by pressing F10 at the bootup screen  and Wlan and Bluetooth Combo is ticked in built in hardwares. I installed Wireless Assistance software abd it showed Bluetooth to be enabled but Wifi to be disabled saying it had been disabled by device maneger .  and i cant find it in device maneger under any of the headingSo how em i suppose to fix itis it a software related problem .. or a faulty Wlan Card ??Whats the sollutionCompaq Presario CQ42

A:My wireless button doesn't work

I am having the exact same problem with an HP dv7-1135nr. I posted in another topic earlier but I didn't see this one before that. Mine will come back on a reboot sometimes but not always. I went to Administrative Tools, Services, WLAN autoconfig and turned it off, rebooted, still not working. Went back and turned WLAN autoconfig back on, reboooted, and it came back on. Really would like some help on this also. ThanksDavid

9 more replies
Answer Match 58.8%

i have a microsoft wireless mouse and it just stopped working. I tried a wired mouse and it works. I tried resetting the wireless mouse and it didn't help. Maybe it's missing a driver? Does anyone have any suggestions on how to fix this problem?Thanks
 

A:wireless mouse doesn't work

Hi cgbones, have you tried synchronising the mouse with the wireless receiver (if it comes with one which i imagine it would do)? also if you download and install the latest drivers just by doing a search of the make and model of the wireless mouse in google, or if you said its a microsoft wireless mouse i'm sure if you have a look on the microsoft website they should have the latest drivers on there.
 

2 more replies
Answer Match 58.8%

Hello,

I first off want to apologize if this is in the wrong place. I had searched around and read the website and found a similar problem posted in this section of the forum so I figured I'd try my luck here and apologize if I'm going about this the wrong way. I'd like to tell you I'm not to computer savvy but will be trying my best as I am very frustrated and ready to send my computer away to get fixed but will lose all I have on it and have no computer for teaching. I thought it was my wireless card and was ready to buy a new one. But wanted to check here first. My internet works when I plug it into the wireless modem via ethernet cord. Things are progressing to interupt the internet though, AIM will not work anymore, and it somehow downgraded my flash viewer on websites and will not let me download the lastest version. When I start the computer it gives me two error messages.

1. synTPEnh.exe - application error - this application failed to initialize properly (0xc0000142). click ok to terminate application

2. RunDLL - error loading c:/windows/system32/NvCpl.dll

The Operating system is Windows Vista Home Premium

Again thank you for any help you can offer... even if it's just letting me know If its a virus or I need a new wireless internet card.

-Matt

A:Wireless internet doesn not work

As no logs have been posted, I am shifting this topic from the specialized HiJack This forum to the Am I Infected forum.==>PLEASE DO NOT NOW POST LOGS<== unless a log is specifically requested.

3 more replies
Answer Match 58.8%

I think I may have deleted a necessary file for my wireless internet to work. Every time I try and search for a wireless network it comes up with this message:

Error loading C:\Windows\system32\van.dll
C:\Windows\system32\van.dll is not a valid Win32 application

Is there any way I can get the file back? Download it or something?

Also, every ten minutes or so a pop-up comes up at the bottom of my screen saying that my Recovery drive is full. What can I do about this?

I have a Dell Vostro 1500, and Windows Vista as the operating system.

Any help with be so appreciated! Thank you so much!!
 

A:Wireless Network doesn't work! Please help!

Try this at a command prompt: SFC /SCANNOW

It sounds like the file has gotten corrupted.
 

1 more replies
Answer Match 58.8%

I have Lenovo 4446 g530, and my wireless its not working.

It worked just fine, I was using my laptop and I put it on sleep mode, when I got back on it the wireless doesn't work.

If anyone can help me with this I would appreciate it very much.
 

A:Wireless on my laptop doesn't work?

6 more replies
Answer Match 58.8%

I have a wireless router set up and it works great on 2 of my computers and a pocket PC but the other desktop just isn't getting the connection. It says it can see the router so i click yes, you can connect even though its not secure, but it won't do it. it just pops up again saying wireless connections available. is there some settings i don't have setup right on this computer? it works on my others and it appears all the settings are the same. could it be the wireless network card? but it does see the signal it just can't connect. please help!
 

A:Wireless doesn't work on 1 of my comps

6 more replies
Answer Match 58.8%

Everything functioned just fine and then one day I turned on the computer and the wireless is turned off and can not be turned on. The switch remains amber and in Control Panel wireless on/off is greyed out and can not even be selected. I found several things on-line regarding this problem but none with a solution that worked. It also appears to happen to at least 4 other models of Elitebook.  Network addapters all are working according to device manager.I get internet access  when ethernet plugged inAs far as I can tell everything is current as far as updatesOne solution that was said to work on another forum was deleting the HP Assistant but I couldn't find it on my computer at all so I installed it thinking perhaps a current version may solve the proplem or overwrite previos copy of assistant. Nothing changed. I have not deleted it as I apparently didn't have HP Assistant prior to installing it myself.OS is Windows 7 (64 bit)Professional Service Pack 1I have not tried BIOS as this was suggested in every similar post I found but wqs never reported to be successful.I have not reinstalled drivers as only 1 was listed on HP website that matched mine which was INTEL 82579LM.The other two drivers were not listed in the downloads. They are; Intel Centrino Ultimate-N6300 AGN and Microsoft Virtual WiFi Miniport AdaptorWhen rightclicking drivers in Device Manager under Properties all three drivers report "Device is working properly" I purchased this laptop j... Read more

More replies
Answer Match 58.38%

Hello. I have Radeon HD 3850 AGP and Win7, and I tried to do almost everything ...
I installed 9.12 drivers, 9.12 drivers with adding CL_91526 from the topic above), 9.11 drivers, 9.11 drivers with Hotfix (ATI), 9.11 drivers with adding CL_91526, manual driver install by right click . Absolutely no changes and everytime the same ... During and after installing (before reboot) no changes in Device Manager, having "ATI Radeon 3850 " (or "ATI Radeon 3800 series" or something like that...) with yellow triangle and Microsoft Co. driver. And after reboot no changes with it, an error message with something like "Driver didn't install correctly, please install proper driver" ( though in ATI install log you can see that everything was installed succesfully). So after reboot I still see my VGA like "ATI Radeon 3800 series" with Microsoft driver and of course no changes in monitor resolution and all. If I try to delete microsoft driver (and device), and then install radeon drivers , during installation I absolutely just don't have any VGA in Device manager. And after reboot Win7 "finds" VGA and install from internet microsoft driver, so I can see "ATI Radeon HD 3850 (Microsoft Corporation WDDM 1.1)" in Device Manager.

I think that radeon drivers don't install (or don't install correctly), and Win7 ignores (or doesn't see) them.

Please help... Maybe I do something wrong ?...

(Asus P4S8X motherboard (latest bios), P4... Read more

A:Radeon HD 3850 AGP, driver doesn't work.

Welcome to seven forums AngieM: Unfortunately you have a pretty old system a socket 478 board I would suggest first off to use 32 git seven and try the method in this thread to try and get your driver to install. Not every systems hardware is up to running windows seven Install AGP Drivers for HD 3850, 3650, 2400 PRO This is the only method I know of that will install the agp driver, Are you sure you are following the directions EXACTLY the way they are written and installing form device manager? If so then it is possible your system may just be to outdated to run win 7 Sorry to tell you but?. Fabe I wanted to add you might want to uninstall the driver then use driver sweeper to make sure all remnants of the previous driver are removerd before trying again http://www.guru3d.com/category/driversweeper/

9 more replies
Answer Match 57.96%

My wireless switch in my hp probook 4530s won't turn on. The amber light stays on, and I can't connect to my wireless network.

A:wireless switch doesn't work on 4530s

i have the same problem last week. Luckily, I was le to solve to problem. Maybe it was also disabled in our BIOS system. Restart your laptop then press F10 in order to go to your BIOS system. Just Press the defaults and SAVE . Press ok,close then restart. Hopefully this will help. Goodluck!

6 more replies
Answer Match 57.96%

hi everyone

i just re-imaged my old thinkpad's hdd and reinstalled Windows 7, but now I am not able to access the internet because its not recognising the stock wireless card installed. I don't have access to ethernet so I can't just do a windows update. so far I accessed the internet from my mac and downloaded the drivers the thinkpad website, but i don't know which card i have installed, i tried all of them and they don't work. what should I do? any help or advice will be much appreciated, thanks.
 

A:reformatted thinkpad now wireless doesn't work??

11 more replies
Answer Match 57.96%

Hi,
The problem started a few days ago, Sunday I believe. Anyway started up laptop and could not connect to internet. Looked up Device manager and the wireless card had a yellow triangle with a ! in it. Assumed I had done something so went to System Restore and set a point. There was a warning, however, after it finished stating the Restore did not complete and gave options to do it again.

The curious thing was I had wireless internet, despite it stating the System Restore was unsuccessful. Closed the LT and started it back up. No internet. Ran SR again and again it notified me it was not successful, but I again had wireless internet.

I ran every test possible for the network and internet. The result was "no connections available. Plug in an Ethernet cable." I have internet with cable. tried to update the card's driver and it says I have the latest driver. One of the Intel tests said something about the digital certificate.

Ran all your tests and am at your mercy looking for guidance...thanks.
R
 

A:Can't Use System Restore And Wireless Doesn't Work...

Hi there, I am not seeing malware in any of those logs. I suggest you post in the software/networking forum.
If you are not having any other malware problems, it is time to do our final steps:
We recommend you keep Malwarebytes Anti-Malware for scanning/removal of malware.
Renable your Disk Emulation software with Defogger if you had disabled it in step 4 of the READ & RUN ME.
Go to add/remove programs and uninstall HijackThis. If you don't see it or it will not uninstall, don't worry about it. Just move on to the next step.
If running Vista, Win 7 or Win 8, it is time to make sure you have reenabled UAC by double clicking on the C:\MGtools\enableUAC.reg file and allowing it to be added to the registry.
Now goto the C:\MGtools folder and find the MGclean.bat file. Double click ( if running Vista, Win7, or Win 8 Right Click and Run As Administrator ) on this file to run this cleanup program that will remove files and folders related to MGtools and some other items from our cleaning procedures.

Any other miscellaneous tools we may have had you install or download can be uninstalled and deleted.
After doing the above, you should work thru the below link:
How to Protect yourself from malware!
 

3 more replies
Answer Match 57.96%

My wireless is just not working. I have read the other threads and tried the different suggestions and it is still not working I need majore help . I did the IPConfig thing and this is what I got.

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Dell>IPCONFIG
Windows IP Configuration

Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : hsd1.md.comcast.net.
IP Address. . . . . . . . . . . . : 98.233.75.92
Subnet Mask . . . . . . . . . . . : 255.255.252.0
IP Address. . . . . . . . . . . . : fe80::212:3fff:feee:15c9%4
Default Gateway . . . . . . . . . : 98.233.72.1
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : fe80::ffff:ffff:fffd%5
Default Gateway . . . . . . . . . :
Tunnel adapter 6to4 Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . : hsd1.md.comcast.net.
IP Address. . . . . . . . . . . . : 2002:62e9:4b5c::62e9:4b5c
Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
Tunnel adapter Automatic Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . : hsd1.md.comcast.net.
IP Address. . . . . . . . . . . . : fe80::5efe:98.233.75.92%2
Default Gateway . . . . . . . . . :
C:\Documents and Settings\Dell>^A

This is not what I had at first. I uninstalled my wireless then reinstalled to see if that will get my wireless to start and that didn't. My wireless was working then after I downloaded Win... Read more

A:Wireless is connected but the internet doesn't work

12 more replies
Answer Match 57.96%

We have optimum online internet. We were given the modem and also a router as well to use. Its the netgear n600 router. We also have VOIPO phone service as well connected as we need internet on or the voipo won't work.

I have noticed that the wifi sometimes would not work. I could not connect to it. But those times that it does work, it would have some very short disconnects like a few seconds then it would go back to connected.

However when i put an ethernet cable to it and thus a wired connection from the laptops, rarely is there any issue with the internet. There might be a short disconnect for a bit but i haven't noticed it yet.

Is there a reason for this? We put the router in the 2nd floor in this house and we basically put it on top of a very short table. Basically its placed about 1 feet over that little table... that little table also has the modem and our cordless phone and thus the voipo.

I know location of the router is important but could putting it a bit too low like just 1 feet above the floor be a cause of this?

Could it be the router issue itself as i read many routers would disconnect throughout the day? I did check online and i did read a few ppl mention this about this router.



http://www.amazon.com/NETGEAR-N600-W...ireless+router


Optimum online gave us this router to use while we signed up for their cable internet service only. Thus if we cancel the service we have to return it back to them. Has anyone here used this router and ca... Read more

A:Wireless Internet Doesn't Work or Very Slow?

This is very strange. We have 2 other laptops. Those 2 laptops we cannot connect to the wifi. Either it connects and show limited activity or doesn't connect at all.
The sager laptop however... has zero issues connecting to the wifi.
Can someone tell me why this is happening? I did unplug the wires for the modem, router and the VOIP but same issue.
So we have to used a wired connection with an ethernet cable for one of the other computers. The asus one can't connect wifi so i want to use that, i have to do wired.
My iphone doesn't even connect wifi either. If thats the case... why would my sager laptop have no issue with connecting to the wifi?

1 more replies
Answer Match 57.96%

Using Linksys wireless router. Recently had to change the modem, now I can't get past the router. Modem works fine when connected direct to a Pc.
 

A:new modem w/linksys wireless - doesn't work

8 more replies
Answer Match 57.96%

Hi, I have a HP G71-329WM running Windows 7 and I believe it recently updated windows via windows update. I attempted to turn on my computer and it would not boot, freezing on the start up screen. I managed to resolve this initial problem by going through safe mode and doing a system restore to a previous state. However, the laptop now boots up but does not recognize any networks and the wireless adapter cannot be recognised, meaning it only connections VIA ethernet cable. I have tried re-installing the drivers for the wireless adapter but this has not resolved the issue. Short of re-formatting (which I really don't want to do) I'm lost for how this can be resolved. Any ideas?!
 

A:Failed Boot Up/ Now Wireless doesn't work..

A quick test until further help comes along: Did you try Unplugging your Modem, then your Router, wait
10 Seconds, plug in your Modem, wait until all the Lights Stop flashing, then plug in your Router.

Good luck
Ray
 

1 more replies
Answer Match 57.96%

I do not understand this. I've been buying and returning 'defective' wireless devices for my media center for the last few months. I bought a logitech wireless mouse (v220) a few days ago and it works on my E6410, E6510, Thinkpad T500, NC6230, and custom amd gaming machine.

However, on the machine it is intended for use on, it does not work. It seems to work fine (as far as I can tell) in windows. In media center, bridge, firefox, ect... it just doesn't work. You move the mouse, nothing happens, or it moves very spotty.

I just cannot think of anything that could be causing this. I've tried removing all unnecessary devices, I even disabled the wifi on the off chance that was causing interference.

Has anyone had an issue like this before?

A:Wireless mouse doesn't work... on ONE computer

This might sound stupid, but people often overlook the simple things. Have you tried in different USB ports on the machine they tend not to work on?

7 more replies
Answer Match 57.96%

Hi,

My PC at office is P4, 512 MB Ram, The Wireless card is “Ralink Turbo”.
It is one of a Network and connect to internet through this network.
I installed a Micro Edition of Windows 7. Everything is going properly with it except the wireless internet connection (its driver is installed and working properly as shown in Device Manager), by click “Connect” and typing the PW, it tries for few minutes then fail in connecting putting a yellow small circle on the wireless icon in Task bar .
If I use Ethernet connection it access to the internet normally and successfully.
Are there anything could be missed or done to solve this problem? Please Help.

Thanks in advance.

Note: The wireless connection in Windows XP, which is installed in the same PC, works and connects successfully.
 

A:The wireless connection doesn't work in windows 7

Sorry; no support here for pirated software.
 

1 more replies
Answer Match 57.96%

Thanks for all the advice on firewalls. I just installed Kerio 4.1.2 and now my wireless connection won't work!

It works fine when hooked up to wireless Linksys router with a cat5 cable, but it won't allow browser to make a connection with a web site. I installed the software with the "simple" mode checked and have not changed a thing in the configuration yet. I disabled the software and I STILL can't make a wireless connection. The wireless connection was good moments before I did the install because I used it.

Do I have to uninstall this product? I need help fast too, because I really sold getting a firewall on this machine to my wife.

Help! Any suggestions?

A:Just installed Kerio 4.1.2 - now wireless doesn't work

Never mind, I'm at a loss to explain it, but I uninstalled 4.1.2, rebooted, reinstalled, then rebooted. Wireless working now.

Looks like I'll get leg tonight afterall.

I'm going to start looking into using the advanced mode now after I do some reading. If anyone using Kerio 4.1.2 has any advice or links to "how to configure advanced" please post them. I'll need all the help I can get.

Wish me luck!
smilie

1 more replies
Answer Match 57.96%

I have been given a Dell Inspiron to 'fix' for my boss...
I have a wireless network (at home)
The linksys software says "you are connected to the access point, but the internet cannot be found"
I tried to run ipconfig to reset the ip address and it comes back as 0.0.0.0

I manually set the address/gateway/DNS with no success

I restarted the DNS client with no success

I checked the register HKEY_LOCAL_MACHINE\System\ControlSet001\Services\DHCP to make sure it was Tcpip Afd NetBT with no success

my other computers work fine on the network (hence this post)

any help would be greatly appreciated.
 

A:can't connect to wireless, ip renew doesn't work

10 more replies
Answer Match 57.96%

E3-111 Win 10 installed. But the Qualcomm Atheros AR956x Wireless Network adapter doesn't work (errror code 10) Tried lot of options. No result.  Somebody any ideas, advice. Thnx

More replies
Answer Match 57.96%

I've got a peer to peer wired lan network for file and print sharing with 7 computers mostly xp.
My internet is from cable coming through a separate wireless router that gives 2 of the computers internet via wireless usb dongles. My problem is that on both of the computers with the usb dongles you have to disable the wired lan in order for the internet to work. They show that the wireless is connected and working but they wont load web pages unless the lan is disabled. Any help will be greatly appreciated!

Windows IP Configuration

Host Name . . . . . . . . . . . . : MGR
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes

Ethernet adapter Wireless Network Connection 9:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : RT73 USB Wireless LAN Card #3
Physical Address. . . . . . . . . : 00-0E-2E-80-BA-E5
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.15.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.15.1
DHCP Server . . . . . . . . . . . : 192.168.15.1
DNS Servers . . . . . . . . . . . : 192.168.15.1
Lease Obtained. . . . . . . . . . : Wednesday, April 16, 2008 9:30:25 AM

Lease Expires . . . . . . . . . . : Wednesday, April 16, 2008 10:30:25 A
M

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
... Read more

A:Wireless internet doesn't work when lan is enabled

You are showing 2 DHCP servers on your network,both trying to
set IP's for the network and causing conflicts.
You need to disable DHCP on the computer with this IP:
192.168.15.1 and let the router handle DHCP.
Run the network setup wizard on that computer and select connects
through a LAN or residential gateway.
That should turn it off.
Start/control panel/network setup wizard.
 

3 more replies
Answer Match 57.96%

Shucks.. just received this today and it doesn't work for squat. I'm trying to get my wireless controller to work on my 64x vista with the receiver. I've installed the necessary driver and software as well. Think I can get this working? Or do I just have to buy a wired controller, assuming that even works.

The USB is connected directly to the mob, so it's not power related. I've restarted and disconnected all other usb connections. Also those little signal buttons don't help either.

Again I'm hearing this a common problem. Either because my pc can't pump out enough power for it, even though it's high end. Or there are driver conflicts between the receiver and any logitech mouse/keyboards.

A:360's Wireless Receiver/Controller Doesn't Work

Originally Posted by Snowee


Shucks.. just received this today and it doesn't work for squat. I'm trying to get my wireless controller to work on my 64x vista with the receiver. I've installed the necessary driver and software as well. Think I can get this working? Or do I just have to buy a wired controller, assuming that even works.

The USB is connected directly to the mob, so it's not power related. I've restarted and disconnected all other usb connections. Also those little signal buttons don't help either.

Again I'm hearing this a common problem. Either because my pc can't pump out enough power for it, even though it's high end. Or there are driver conflicts between the receiver and any logitech mouse/keyboards.



i had the same problem, but i had this problem because of my mouse, its a razer lachesis banshee V2 (eats the power because of the pulsating snakes), all i did was plug in an externally powered usb hub and plugged my wireless reciever into that and it works.

3 more replies
Answer Match 57.96%

The Stylus Pro 7600 is now a really old printer, the last supported driver was for XP but it worked in Windows 7 and I believe to some extent in 8 although I never did try it.

It s a really good reliable large format printer though and very affordable in parts, ink and the second-hand purchase price.

However alas Windows 10 doesn't like it, I did the upgrade to 10 (and then the downgrade) from windows 7 but it will not see the driver it sees the device but calls it a USB high speed device or something like that and compatibility mode didn't seem to help.

So unless there is a clever work around and I'd love that to happen I'm stuck on Windows 7 for the duration.

Suggestions welcome.

A:Epson Stylus pro 7600 - Driver doesn't work

No cleverness here, and I don't have such a printer, but...

Have you tried the drivers for Vista?

Epson Stylus Pro 7600 - Photographic Dye Ink, Drivers & Downloads - Technical Support - Epson America, Inc.

These are for the dye-based version. I didn't look to see whether the Ultrachrome based one uses different drivers.

(There are also 32 bit Windows.) If they don't want to install, you could try right clicking on the installer and running the Troubleshoot Compatibility tool.

Good luck.

3 more replies
Answer Match 57.96%

HP Deskjet 610CL driver doesn't work with Vista. HP Support in Bombay, India says "You should buy a new printer."
Printer still works great with windows 2000.

So should I remove Vista & install Windows 2000 on my PC or is the a driver somewhere that will fix the problem? Don't tell me to go to HP website. BTDT, it teels me that the driver is already installed on Vista. That's the one that doesn't work.

Anybody know ANYTHING about this problem?
 

A:Deskjet 610CL driver doesn't work with Vista

12 more replies
Answer Match 57.96%

Hi there!
I just got my new Asus Vivobook s400ca running Win8.1, a few weeks ago.
It really runs great, although I managed to find one problem. Since this is a laptop without a detachable screen,
I didn't really find any good reason for having the touch keyboard toolbar () in my task bar, since I was pretty sure I'd never need it. So I disabled the keyboard, which worked out fine but the toolbar was still there.

I then went on to try to remove it by using one of EightForum's .reg files for that purpose.

This did, as described, remove the toolbar, but apparantly it stopped the mouse pad driver as well, even though the mouse pad itself basically works. (no gestures or scrolling though.)

As you can see here, There's no driver running.


And in the ASUS hub, it's also impossible to turn it on. It just keeps saying it's off.

So I decided to use another .reg file that I found with the initial one, that should basically just rollback the effect that the other one had, but to no avail.

It just made the toolbar come back.
So I don't really know where to go from here. Any suggestions?
Also, if there is anyone who knows what to do about that toolbar, please do tell! [:

Thanks in advance! [:

More replies
Answer Match 57.96%

Sorry if I am posting in the wrong forum, I'm not sure if this should be in graphics cards or drivers...or somewhere else entirely.

I have an Intel 845GL Chipset....I can't find a driver to make it work using Vista.

Do I have to buy a new graphic card? Or am I missing something easy, or is there a work around?

A:Work around? Intel doesn't supply a vista driver.

Ok, I am resolved to replacing my video card.

I've never replaced a video card before, but I've upgraded memory, installed a hard drive and a modem before...is replacing a video card more complicated than that?

And, where should I start in determining what is compatible for my system/Vista etc?

9 more replies
Answer Match 57.96%

My boss bought a new HP tower after our old one ran out of space. I plugged it in and everything worked until I realised the scanner didn't work. I downloaded a driver but it still didnt activate the scanner. So I looked at the driver repair discs that came with the tower. I installed that thinking it would repair the scanner driver and when I logged back in, the keyboard or mouse USB didnt work. I hope I didn't screw up anything. The keyboard works in BIOS. My boss doesn't know and I would like to get this repaired without bringing anyone in. HELP! Im on Windows 7.

More replies
Answer Match 57.96%

Yesterday I reinstalled Windows 7 on my notebook PC. I had to use a Microsoft installation disk because unfortunately, serious errors resulted after I installed from the HP recovery program. Consequently the HP drivers that were installed automatically with the recovery program weren't installed on my system. I had to install several of them from the HP support site. I got everything to work except for the Touch volume control, or the Volume Scroll Zone as referred to by HP in the service guide. This is the device located just above the keyboard that increases or decreases speaker volume when you drag you finger on it. I installed the Quick Launch button driver but that only applied to the mouse and pointer touchpad. I looked at the devices listed in my startup configuration. I saw the synaptics pointing device and the HP quick launch buttons listed. So is the IDT PC audio driver.  What am I missing? Where I can I find it to activate the touch volume control?

A:Touch volume control doesn't work on dv6, looking for driver

@accordeoniste Try these. http://ftp.hp.com/pub/softpaq/sp48001-48500/sp48425.exe http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46731.exe REO

2 more replies
Answer Match 57.54%

Hi all,

I had consistent problems with Limited Access and losing connection in general on my one-year-old Samsung laptop. After trying various fixes, with none of them working as needed, I eventually decided to try to uninstall the wireless device, as suggested here. And following the described procedure I expected the device to reinstall after reboot and to have wireless access once again, whether that solved the mentioned problem or not. Procedure was: Device Manager > Select device (Qualcomm Atheros AR9485WB-EG Wireless Network Adapter) > Right click "uninstall" and the device was removed.

However, after Windows installed available drivers after startup (v10.0.250 or something of sort), I couldn't connect to home wireless network. Check the Image-1 to see the dialog box in lower right. I updated the drivers to the latest ones I could find, even before uninstalling, but it didn't help. I pulled out a cable, connected and right now I'm ~7 hours total searching for a fix and I finally decided to come to you all as there's nothing I could find to fix it myself. Below are some info that might be relevant.

1. System: Windows 7 Professional, 32 bit
Laptop model: Samsung NP270E5V - X01HS
Network Adapter: Qualcomm Atheros AR9485WB-EG Wireless Network Adapter (current driver v9.2.0.470)
Network Adapter Hardware ID:





Quote:
PCI\VEN_168C&DEV_0032&SUBSYS_4105144D&REV_01
PCI\VEN_168C&DEV_0032&SUBSYS_4105144D
PCI\VEN_168C&D... Read more

A:Laptop wireless doesn't work after device reinstall

I would try and go to samsung's support site and see if you can find updated drivers for the device. If that does not do anything for ya; I would contact samsung directly and see what they may be able to do to help.

7 more replies
Answer Match 57.54%

Okay, so here's the deal. Whenever I connect to my wireless internet, be it when booting up the computer or changing to it via the modem cables, it refuses to work. The only way it works is if I click on the network computer in the bottom right corner and then troubleshoot for a couple mins, until the computer automatically fixes the problem. Im guessing a service or something isn't working. Can anyone help me here? Ive tried buying new modem to wireless modem cables but still no luck. Obviously using Windows 7 (Ultimate)

A:Wireless Internet Doesn't Work When Booting Up Computer

are you connecting to a router or a modem?

9 more replies
Answer Match 57.54%

Hello. I am just trying to get some opinions on the subject of wireless remotes for a mouse. I can't believe it but someone on Amazon.com sold me a wireless laser mouse without a remote (MS wireless mouse 6000). Incredible.I have found that you cannot just use any remote to any mouse, even if it is the identifcal model. In fact, I have this same identifcal MS wiresless 6000 mouse but doesn't work with it. Is there something you can do to get them working? There is a section on Amazon.com where you click more and I guess that's probably where it said no remote. It sure wasn't made obvious-like in bold or something. He definitely intended to trick me. You have to completely read everything with people like that around. Not to mention, it wasn't even cheap.
 

More replies
Answer Match 57.54%

Hello everyone, I need some help. I've found my old (1, or 2 years old) Realtek RTL8187B USB 2.0 Wireless Adapter. I plugged in into my PC, but it doesn't find any networks, but it works 100% on my laptop. On PC windows said, that maybe something wrong with the driver, I reinstalled it a few times, but same happened again, again. Both has Windows 7 Professional 64-bit.
Please help!

(Sorry for my bad english)
 

A:Realtek RTL8187B Wireless Adapter Doesn't Work

15 more replies
Answer Match 57.54%

I have problem with my wireless switch. Take a look at this [picture|http://bildr.no/view/591716]. It says "bryterstatus: p?" which translates (poorly) to "switch status: on".

Although, when I press Fn + F8, nothing happens. All the other FN + "random button" hotkeys work though. In other words, I can't connect to my wireless. I know that it works, because I can connect with my iPhone. There's also nothing wrong with the connection, I've tried to deactive / active on and off. Tried to restart my laptop. I've even downloaded new drivers. Nothing seems to work. How can I turn on the switch?

Best Regards,
Miguel Rodrigues

A:Satellite Pro L500 - Wireless button doesn't work

Hello Miguel

Has your notebook ?factory settings? or you have changed something?
Have you installed own operating system or notebook still has original preinstalled operating system?
Is WLAN card installed and listed properly in device manager?

WLAN usage is so simple and by ?default? it must work properly. The same principle is on all Toshiba notebooks same. When you want to use WLAN you must move WLAN switch to position ON and use FN+F8 key combination to enable WLAN card. That?s all.

What you can try is to reinstall Value added package?

7 more replies
Answer Match 57.54%

My wife's computer went crazy finally and she's finished with Vista, so I wiped the computer and put XP on it. When I say wiped it, I mean its clean, deleted all the partitions and everything. Started from scratch. Everything works great on the computer after I downloaded all of the drivers I am pretty sure the computer needed, except the wireless internet. Both of us being college students that is kind of a need. When I go to network connections there isn't an option for wireless network which is where I get thrown when I look at any "hold my hand and walk me through so I can get on the net" tutorial. Any help would be greatly appreciated and if you need to poke fun of my lack of PC knowledge that is just fine too. Thank you again.
 

A:Upgraded from Vista to XP Home, wireless doesn't work

16 more replies
Answer Match 57.54%

How do I switch from wireless to wired networking?

If my laptop is off, I plug in my network cable and switch the wireless radio off, Windows starts fine and I can reach the internet.
If I turn on the radio and unplug the network cable, I can still reach the internet.

If I plug the cable back in and switch off the wireless radio, Windows can't find any networks.

The only way to use a wired network is to plug in the cable and restart Vista. Why is that? How do I fix it?

A:Switching from wireless to wired networking doesn't work

I cannot tell you why, however you can run with both connected at the same time. The wired will take over the connection. That's what happens on my laptop
I have just experimented replicating what you have described and mine works.
Question, are you giving it time to reconnect? I tried mine three times and each time it took about one minute or more to reconnect.

3 more replies
Answer Match 57.54%

Hi,

I have 2 computers, 1 wireless modem/router combo and a network that just won't connect. One computer is wired to the modem/router and the other is using a wireless adapter (d-link wua-1340). This computer can detect the wirless network and has been connected but whenever the pc is restarted it won't connect without trouble. I don't even know why it works when it does because i'm not doing anything differant. :S I could really use some help, I wanna play WoW
 

A:Wireless network...plug and play doesn't work

16 more replies
Answer Match 57.54%

Hi I am new here and I need help. I can normally figure out things for myself but this problem has got me stumped. I have an issue with the modem(s) I am using. My network has a modem (from AT&T uverse ) with a Cisco router connected to it through a wired connection and everything in the house connected wirelessly to it except my desktop. Yesterday I was disconnected from the Internet but all the lights on the modem were still green. I lost both wired and wireless connection. I tried the normal reset of the modem and it didn't help. All lights green. No internet connection. So I tried to connect to the wireless signal from the modem and I was able to connect to the Internet. So logic would dictate that if the wireless signal in the modem works and anything connected through wires ( wireless router, desktop) doesn't, then the modem would be bad. So I just happen to have another modem, exact same make and model. I connect it thinking this would surely fix the problem and it's the same problem, nothing is changed. Wireless works, wired doesn't. So now I'm stumped. I don't know what else it could be. It might be possible both modems are bad and have the same problem since it's the same brand and model but I want to explore all possibilities before I call AT&T and deal with their lousy service.

More replies
Answer Match 57.54%

I recently switched over to Comcast for internet and have an xfinity router. The wifi works perfectly on all computers and devices except one. It's not working on a large desktop that uses a TP-Link wireless card. When I try to connect to the internet from Firefox on this computer, it just says "Connecting..." on the top of the tab for a while and eventually goes to a "Server not found" page.

Every now and then, usually after I try something random to fix it (such as turning on "SoftAP mode" on the TP-Link card) the internet will work for a few seconds, but then it stops again.

(Sorry if I didn't put enough information in here; tell me if you need to know anything else.)
 

A:Connected to my wireless router, but internet doesn't work.

16 more replies
Answer Match 57.54%

I purchased a dell 15r (N5010), and have had it for about 3 days. It is a core i3 2.27Ghz, 4Gb RAM. I did a clean install of the OS to get rid of all the bloatware. I then downloaded the respective drivers from the dell website and the resource CD that came with the laptop. After the clean OS install i started having problems with my connection. The computer will not connect to the wireless connection in my room which is very close to the router, and it will say "Windows was unable to to connect to "xxxx" The thing is that other computers in the house all work with the wireless and are farther away from the router. Also my sisters computer which is a 10.1 Asus netbook connects better to the internet than my $900 one. I can only connect to the internet when I am not in my room, but the thing is, is that even my iPhone works in my room. Also i previously had a desktop computer with a wireless adapter and it would work on my room. All the drivers are updated and theres no problems on the device manager, what could be causing this? Its really annoying me that I can't connect to the internet on my room when any computer can even my iphone or a 10.1 Asus netbook, even when I move it into my room.

A:Wireless doesn't work in my room in my new computer but works on my ip

Follow this link and update driver for NIC: Dell - Drivers and Downloads

5 more replies
Answer Match 57.54%

I'm having an issue connecting to my wireless router. I can connect fine with security disabled, but it doesn't connect if I enable WPA. It says there's a "timeout" issue when I try to connect with WPA enabled.

No one else is having issues connecting with their laptops and smartphones, so it must be a problem with my computer.

Laptop: Compaq presario cq50 w/Vista Home 32
adapter: Atheros AR5007
Router: Westell A90

Thanks in advance
 

A:Laptop connects to wireless router w/o WPA, doesn't work w/WPA

7 more replies
Answer Match 57.54%

Hello, i have an ASUS X55VD and the wireless adapter isn't working anymore. I tried troubleshooting, reinstalling the ASUS drivers (Ralink and Atheros drivers), uninstalling and uninstalling & deleting the driver from device manager. I tried uninstalling the antivirus (ESET SS 8). The wired connection is working fine.

How it started giving errors: I left it in Sleep mode for 2 days, unplugged. After this i did a restart and the wireless adapter was off. I turned it on using the Wireless Console 3 (provided by the laptop CD from ASUS), the wireless LED stays constant ON, although in Network and Sharing center, the wireless connection is Disabled. Re-enabling it from there it just says Enabling... -> Enabled but it still remains Disabled. After this i started applying the fixes mentioned above. Whenever i start the laptop now the Wireless is disabled and i don't know what else to try.

A:Wireless Network Adapter doesn't work anymore

I don't want a definite solution, just..i don't know what else to try. Can someone help?

2 more replies
Answer Match 57.12%

So the other day my wireless stopped working. It just wouldn't show any wireless networks were available. So I uninstalled my wireless driver and the reinstalled it and it fixed it. Now it seems like every other day it quits out on me and I have to uninstall the driver and do it again. Is there a permanent fix for this?

Kind regards,
Cameron
 

More replies
Answer Match 57.12%

I'm trying to add a Canon imageCLASS MF7470 printer to my laptop. When I plug it into the USB, Windows 7 detects it, but as unspecified. It says no driver is installed. When I do a Windows update it comes up with other imageCLASS models but not the one I have. I've tried going thru these threads to locate my options but nothing works. When I go to add printer, properties is as far as I can go cause the only tabs I get there are general and hardware. This is a work printer for a jobsite, so of course the disk has been lost at some point, but I need this running ASAP.

A:Add a Canon printer with no driver and Windows update doesn't work

Here is the driver page for Canon, just specify your OS, download drivers, install and go at it could be that MS just doesn't provide them. However Canon does for both 32 and 64 bit.

Canon imageCLASS MF7470

1 more replies
Answer Match 57.12%

Hi,

I installed a new HDD on my Satellite A210-106. Usually it runs on Vista but I had Win XP Professional installed.
Everything woks but the sound/speakers. The driver ist not installed correct.

There unsed to be realtek driver on the old HDD but I can?t get hold of the driver working on XP on the toshiba download list or via realtek.

I would appreciate any suggestions to get the system running again.

A:Satellite A210-106 - Sound Driver doesn´t work running Win XP

Which service pack version contains your installed WXP?

4 more replies
Answer Match 57.12%

Pasting in contextual information from another post. ~ OBconflicker.Bi!nf worm keeps reappearing, windows defender monitor stops working, slow computer, windows search protocol windows pop up, Malware, virusPop up windows keep appearing "Windows search protocol host stopped working and was closed" Itunes occassionally doesn't work, Media Sync doesn't work. Hard Drive keeps working in the background. Windows Defender no longer monitors the running programs.End of added information. ~ OBLogfile of Trend Micro HijackThis v2.0.2Scan saved at 8:46:00 AM, on 1/11/2010Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v7.00 (7.00.6001.18349)Boot mode: NormalRunning processes:C:\Windows\system32\taskeng.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Program Files\Windows Defender\MSASCui.exeC:\Program Files\Digital Media Reader\readericon45G.exeC:\Program Files\Java\jre6\bin\jusched.exeC:\Program Files\Intel\IntelDH\CCU\CCU_TrayIcon.exeC:\Program Files\Common Files\Intel\IntelDH\NMS\Support\IntelHCTAgent.exeC:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exeC:\Windows\WindowsMobile\wmdc.exeC:\Windows\System32\hkcmd.exeC:\Windows\System32\igfxpers.exeC:\Windows\sttray.exeC:\Program Files\... Read more

A:microsoft windows search protocol host stopped, slow, firefox doesn't work, itunes doesn't work

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

2 more replies
Answer Match 56.7%

Hi all.
I've just recently purchased a generic wireless mouse from eBay.
more specifically, this one: 2.4GHz USB Receiver Wireless Optical Mouse F PC Laptop | eBay
it doesn't work. I'm running Windows 7 64bit and it started installing the drivers, first it was installing "HID Wireless Mouse", then it switched to "USB Input Device" but failed after 3 seconds. now it's listed in Device Manager as "USB Input Device" with yellow sign that indicates it doesn't work.
I tested it in 2 other Windows 7 32bit computers and it works just fine! installing drivers and everything.
moreover - I testes my bro's logitech wireless mouse on my 64bit Windows 7 computer and it works fine.
I think Windows fails on recognizing it. I mean the drivers are there.. the Logitech Mouse works but mine doesn't.. how do I make it work?
thanks!!

P.S. here are 3 attached images:
http://i44.tinypic.com/2dkg21.jpg - my win 7 64bit device manager with the problematic mouse
http://i40.tinypic.com/369e8.jpg - different win 7 32bit computer with the problematic mouse working
http://i40.tinypic.com/hso0ns.jpg - my win 7 64bit device manager with the logitech wireless mouse

A:Wireless Mouse Doesn't Work Win 7 64bit But Works On Win 7 32bit

Did you install the mouse software first, then reboot and install the mouse and USB wireless adapter?

Disconnect the the mouse, reboot the computer and start taping the F8 key to enter Advance Boot Options window. Using the down arrow key, select Last Known Good Configuation. Hit Enter.

9 more replies
Answer Match 56.7%

Marvell Libertas 802.11 b/g Wireless LAN Client Adapter Doesn?t Start My PCI card.
I have installed a Rosewill RNX-G300E Wireless PCI card. I have attempted to install the drivers for it but keep getting ?This device cannot start. (Code 10)?. As I am using the Windows 7 professional version that is included in Win 7 Pro, this is a bit frustrating.
I can use a usb version of a wireless interface such as AirLink 101 USB XR adapter but I have the Rosewill card and want to use it. None of the sites like softpedia are useful.

A:Marvell Libertas Wireless LAN Client Adapter Doesn't work

  
Quote: Originally Posted by DrTEE


Marvell Libertas 802.11 b/g Wireless LAN Client Adapter Doesn?t Start My PCI card.
I have installed a Rosewill RNX-G300E Wireless PCI card. I have attempted to install the drivers for it but keep getting ?This device cannot start. (Code 10)?. As I am using the Windows 7 professional version that is included in Win 7 Pro, this is a bit frustrating.
I can use a usb version of a wireless interface such as AirLink 101 USB XR adapter but I have the Rosewill card and want to use it. None of the sites like softpedia are useful.



Have you tried here? Rosewill.com - Download Center for Driver, User Manual , Firmware, Application
Ken

3 more replies
Answer Match 56.7%

Function key for wireless off and on doesn't work 

A:Turn off/on wireless switch doesn't work inspiron 7737

I would check the BIOS click restart while holding ctrl and then choose BIOS / advanced tab / Function Key behavior and make sure that it is set to enabled. If that doesn’t help, try downloading and installing Dell Quickset here for the wireless button to work.
Please let me know if you continue to have problems.

1 more replies
Answer Match 56.7%

Hi. I formatted both my laptop and desktop computer. When i did with my laptop, everything was great. Wireless still worked. Of course i have my linksys router connected to get the wireless.
I then formatted my desktop. Its a dell. When i did this, everything seemed great. However, i noticed that if i remove my wireless router and just connect my cable modem wired, it works. However, when i connect my wireless router, then my wireless internet works but my WIRED connection does not work. It has this message that says can't connect.
Can someone help me here? I don't think this has ever happened before. I mean, there were many times where my desktop got formatted and my wired internet worked and i could not get my wireless connection to work. But never had i had my wireless work and my wired connection not work. Can someone help me on this? The one thing i did this time was after i installed the drivers with my windows cd, i then deleted the old windows file that was about 25 gb. Could that be a reason?

A:Wireless Internet Works, Wired Connection Doesn't Work

Hello Dynamite, My name is Dusty, and hopefully I am able to help you out some.

Do you have windows updated? Also, Windows update can check for drivers automatically.

Do you have a LAN driver and wireless adapter driver installed? If windows update doesn't find them, look them up on your motherboard's manufacturer's website and your adapter's manfacturer's website, respectively.

Follow this link to uninstall/reinstall wireless adapter: Internet speed suddenly slow?. Believe it or not, It may help with your problem.

1 more replies
Answer Match 56.7%

I have a Toshiba Qosmio G50-12Q

If you use a wireless mouse does not work the screen saver.
If I disable the mouse instead of the screen saver runs regularly.

There is some way to run the screen saver also using a wireless mouse?

Tank you

A:Qosmio G50-12Q - Screen saver doesn’t work if I use wireless mouse

That?s really strange. I use Logitech NX80 wireless mouse and it works perfectly with screensaver on my Satellite P500 preinstalled with Win7 64bit home premium.

Do you use original preinstalled OS?
Do you use screensaver downloaded additionally or it doesn?t work even if you use standard Win screensavers?

3 more replies
Answer Match 56.7%

Hi, I had some issues with a HDD around this time last year, so I replaced it with a new western digital HDD. I wasn't able to back anything up, so I cloned it instead.

turns out I installed the incorrect driver for my video card and suffered from the BSOD syndrome....

well, I finally got that sorted out, ( I think ) and now I am trying relentlessly to get catalyst pro control center to work properly. Ive read numerous places online that involves editing the Assembly folder, but I have no such keys in there.

when I try and run CCC, it tells me that I am unable to run as I wouldn't be able to change any settings within the app basically. Ive tried uninstalling, installing. trying ATI opposed to AMD- to no anvil.


I know for a fact that I had CCC on this pc, but it almost seems impossible to get up and running, I am very desperate to get this up and running.

thanx in advance
 

A:Catalyst Control Center doesn't work after I installed the wrong driver

Hhhmmmm... let's take a look

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Attach it to your next post by clicking the Upload a File button

 

3 more replies
Answer Match 56.7%

Hello
I have this motherboard:
915GVM6-F/ L

I need graphic driver for Windows 7 (WDDM) with Aero support. I installed driver for XP, but it doesn't support Aero. Please help

Intel 915GM/GMS,910GML

A:Intel 915GM/GMS,910GML Windows 7 driver and aero doesn't work

The specified chipset doesn't support Windows Aero unfortunately.

3 more replies
Answer Match 56.28%

Alright, I had the same problem yesterday that so far two other people have had. I my computer starts getting little popups in the system trey saying the computer is infected, and spysherrif and virusaxe automatically download. I ran everything I had in safemode, as well as smitrem. There were 4 registry items that ewido could not remove though, it kept getting an error.

+ Scan result:

HKLM\SOFTWARE\Classes\MSEvents.MSEvents -> Spyware.VirtuMonde : Error during cleaning
HKLM\SOFTWARE\Classes\MSEvents.MSEvents\CLSID -> Spyware.VirtuMonde : Error during cleaning
HKLM\SOFTWARE\Classes\MSEvents.MSEvents\CurVer -> Spyware.VirtuMonde : Error during cleaning
HKLM\SOFTWARE\Classes\MSEvents.MSEvents.1 -> Spyware.VirtuMonde : Error during cleaning

The spyware seems to be gone now, but when I restart the computer ewido still pops up trying to remove a couple objects. Now I have another problem. When I'm connected with my wireless internet, nothing works; whenever I try to visit a site it says teh remote server could not be found. My backup dial-up connection works, which is what I'm on now.
 

A:ewido and adaware cannot remove 4 registry items, and wireless net doesn't work

Closing thread as you are being helped here: http://forums.techguy.org/windows-nt-2000-xp/429090-taskac-dll-ewido-cannot-block-clean-2.html
 

1 more replies
Answer Match 55.86%

Help my windows 7 laptop just keeps rebooting and i cant get to safe mode or recovery what should i do ?

A:system recovery doesn't work and safe mode doesn't work and just keeps reboting

System manufacturer and model?
 
Louis

0 more replies
Answer Match 55.86%

hi, I know there are many in the forum who have the same problem as mine. 
 
my computer was running fine last friday. I tried to start it on saturday, it says it can't startup and need to repair startup. I did run the repair but still can't startup. I tried to use system restore to earlier dates, it still can't startup. The computer has trojan virus before and I tried the anti-malware from internet to kill them. seems that it create more problem for my PC. I have some important files in the computer that I wish I have archived. 
 
wonder if any one can help. thx in advance.

A:can't start up computer-window7, repair doesn't work, restore doesn't work

I'll report this topic to appropriate helpers.
Hold on there...

6 more replies
Answer Match 55.86%

I downloaded Win7 x86 drivers for our Ricoh Aficio MP 171 from Ricoh, to load them onto a machine freshly updated from XP to Win 7. Every time i try to install them, Windows tells me the default driver it chose is the best one and won't install it. The driver it is using does squat, the printer was working fine when it was connected to XP, now the most we have gotten out of it is a few pages of jibberish when we tried to print a photo.

I have tried manually installing the driver from the device manager, i tell it to use a folder on the desktop where i copied the driver, but when i press next it immediately says the driver being used is up to date. I tried telling it to read from a dvd i burned the driver folder on to, it doesn't like that either.

I am toying with the idea of deleting the default driver from system32 (but copying it first to a data key), disconnecting from the 'net, and then installing the one from Ricoh.

A:Default printer driver doesn't work, Win7 won't update it. Ricoh mp171

Hi briligg, Have you tried installing the drivers in admin mode Run as Administrator Some times you have to overrule win7 and tell it you know best this time

4 more replies
Answer Match 55.86%

Hi everyone,
I apologize in advance- I don't know much about computers.
A few days ago, I shut the lid of my Hp Dv6 6108us laptop (running windows 7 home premium 64 bit) and when I opened it later, the Wi-Fi button was lit amber, signaling that it was turned off. I pressed it again to turn it on, but nothing changed. Since this has happened once or twice before (I didn't think too much of it) I just restarted the laptop, which usually got the light back to blue (=working Wifi). Nothing changed over several reboots.
So I did some googling.
My driver is a RAlink rt5390 802.11 b/g/n adapter
I've tried pressing the F12 button (which turns wifi on and off)
I've tried a hard reset
I've tried going into the registry, disabled WLAN AutoConfig and restarted.
I've updated BIOS and the chipset driver available here (http://h10025.www1.hp.com/ewfrf/wc/s...t=5118843#N253)
I tried changing the power settings so the wifi wouldn't turn off during sleep mode, but it acted as if I had no wireless driver. Troubleshoot did nothing but suggest I use an ethernet cable.
I've uninstalled (then reinstalled after it didn't help) HP connection manager.
I did a system restore to before the problem occurred.
I finally found the device in device manager after doing the "show non present devices=1" in the registry.
--There's no enable option
--Clicking roll back did NOTHING.
--Updating the driver led to a message saying I had the most up to date driver.
I've tried uninstalling the driver (usin... Read more

A:Hp Pavilion dv6 doesn't show wireless driver- RAlink rt5390 802.11

Oh and I've also run virus/malware/rootkit checks using Avg Free and Malwarebytes.

1 more replies
Answer Match 55.44%

Hey,

I have setup a Static IP address through Windows XP, and I am trying to forward ports to my Xbox 360 (to avoid Strict NAT settings). The problem right now is that I cannot access my routers set up page.

I am using a D-Link WBR-2310, which is not installed on the PC, but runs a password-protected wireless network. I have run IPconfig, and have obtained the IP address and Default Gateway. When I type either in my Web Browser (tried Firefox/IE) I am led to my DSL modem's setup page and not my wireless router.

I have tried every IP address possible (from the default router address to the IPconfig) and I cannot access my wireless router setup. Through the D-Link website, I have also tried to use an emulator, but I am unable to make any changed regarding Port Forwarding. Once again, my wireless router is not installed, and the installation is not working because "The router is not detected- Error 322"

I have been trying to solve this problem for the past 4 hours with no luck so I would appreciate any help! Thanks in advance
 

A:Networking & wireless: Can't manage router- typing IP address doesn't work(port fwd)

6 more replies
Answer Match 55.44%

I have been looking for an answer to me problem
I can't get my wifi driver to work.
The driver is broadcom BCM43142 802.11bgn wireless lan
it works with win 8.1 uefi but not legacy win seven
it also works on win8.1 legacy

Please help.

A:wireless lan driver will not work on win 7

Check this thread No WLAN/NIC Broadcom 43142 Windows 7 Drivers for SVF15A18CXB

Up to you to use the link in the last post!

2 more replies
Answer Match 55.02%

Hey to TSG!!

I need help in this one. My Bluetooth used to capture others (with no password) wireless networks but if I do extensive use on it, it will not work. For one wireless network, it gets connected but nothing appears and for another, it doesnt get connected at all though it used to. They all are in low signal but they used to work fine!

I dont know what to do right now. Is my bluetooth screwed up? I used to download large files (more than 500 mb) before but now it doesnt get connected.

Please tell me what to do firstly!
 

A:Solved: HELP!! Bluetooth Wireless Doesn't Capture Wireless Networks Anymore!!

16 more replies
Answer Match 54.18%

Hi, I have HP 15-r154nm laptop with Realtek RTL8723BE 802.11 bgn wifi adapter on Win 8.1 pro 64bit and everything works fine. When I upgrade to win10 pro 64bit, wifi driver didnt work(I can not turn on wifi). I try driver by Microsoft update but also didnt work. Is there any help?

More replies
Answer Match 53.76%

Hey well on my acer aspire 3680 i have ar5bx63 wireless internet built in card, when i loaded XP onto it and installed a driver i found on web i would connect to my network at it would lagg at "aquireing network address" i tryed this with 3 installs of XP all did the same thing, so i installed windows vista and with the help of the same driver i tryed on XP the card started up without any trouble, Now i like vista but i want to game and vista isn't giving me that funcionality on my system specs. So i was wondering if this is a error with the driver i am useing or if i'm doing something wrong. I tryed this with tiny xp ( a preformance version of XP) and a out of the box windows XP pro and both gave me the same error. I googled around and nothing. Some help would be much helpful as i am going to partition the drive and install XP tonight (i have a external wifi adapter for it)

thanks so much in advance
 

More replies
Answer Match 53.76%

I installed Windows 8.1 build 9471 into my desktop. I use a TP Link TL-WN781ND wireless adapter to access my home network and the internet. I tried copying the drivers from Windows/System32/Drivres and installing them manually, I also downloaded the exe from the site but they still wouldnt connect. It would just say no connections found.
Any Ideas?

A:Wireless driver wont work in windows 8.1 9471

Did you get your drivers from:

TL-WN781ND - Welcome to TP-LINK

7 more replies
Answer Match 53.76%

I am trying to use my CD-ROM drive and it doesn't work here are the list of things I have tried

Uninstalled and reinstalled the cd-rom driver it is a Matbleepa UJ-840D CD-ROM/DVD/CD-RW in my HP laptop (Didn't work)

Read stuff about code 39 and removed in the registry edit screen Upperfilters, Upperfilters.bak, Lowerfilters, Lowerfilters.bak and rebooted (Didn't work)

Removed itunes from computer (didn't solve the issue with cd-rom player)

Went back to a system restore point that was before the last time I used the CD-rom player and it worked and that (didn't work as well)

Read a lot of different posts about code 39 and nothing is given after the above steps are taken if it still won't work except to reformat which I would prefer not to do.

Any help would be greatly appreciated.

A:CD-ROM doesn't work, code 39 error, tried many things still doesn't work

1. Uninstall the drive through Device Manager.Restart computer. The drive will be automatically reinstalled.or...2. Delete Upper & Lower Filters http://support.microsoft.com/kb/982116Restart computer.or...3. Download, and run Restore Missing CD Drive patchDouble click on cdgone.zip to unzip it.Right click on cdgone.reg, click Merge.Accept registry merge.Restart computer.or...4. Go to Device Manager, click a "+" sign next to IDE ATA/ATAPI Controllers.You'll see two items:- ATA Channel0 (or Primary Channel)- ATA Channel1 (or Secondary Channel)Right click on each of them, and click Uninstall. Confirm.Restart Windows. They'll be automatically reinstalled.

6 more replies
Answer Match 53.34%

Hey Guys,

Ive just reformatted my Dell laptop, and before i reformatted my wireless driver work perfectly, Now that ive reformated the driver has failed to work and there are no drivers for it, Ive manually installed Microsoft Service Pack 1 and 2 and i still have the problem. The driver is 802.11 bg WLAN in the Device Manager it shows as 'Other Devices' Ive unistalled and reinstalled many times, Still have this problem

Is there a fix for this?

Thanks

Corey
 

A:Reformatted Windows Vista Wireless Driver Dont Work

Windows likely doesn't have the drivers.

In any case, ALL of the drivers needed should be on the Dell website. Simply search using your service tag # (unless you've changed the OS from how it shipped).
 

1 more replies