Tech Problem Aggregator

Canon PIXMA MP530 paper jamming issue

Q: Canon PIXMA MP530 paper jamming issue

Canon PIXMA MP530 paper jamming issue
My new printer, the Canon PIXMA MP530 is a great printer, but lately it has been displaying that there is a paper jam when there is no paper jamming the printer... I've tried everything to get the alarm to go off, but it won't print. Anything I'm missing? Any experienced PIXMA owners in a similar "jam"... seriously... please help!

A: Canon PIXMA MP530 paper jamming issue

Have you taken out the paper and looked to see if another foreign object is causing it to think the paper is jammed?

2 more replies
Answer Match 146.7%

My new printer, the Canon PIXMA MP530 is a great printer, but lately it has been displaying that there is a paper jam when there is no paper jamming the printer... I've tried everything to get the alarm to go off, but it won't print. Anything I'm missing? Any experienced PIXMA owners in a similar "jam"... seriously... please help!
 

A:Canon PIXMA MP530 paper jamming issue

Modernboy said:

My new printer, the Canon PIXMA MP530 is a great printer, but lately it has been displaying that there is a paper jam when there is no paper jamming the printer... I've tried everything to get the alarm to go off, but it won't print. Anything I'm missing? Any experienced PIXMA owners in a similar "jam"... seriously... please help!Click to expand...

I am having the same issue. This is my second problem with this printer. Already sent it back once. anyone know how to clear this Alarm???
 

1 more replies
Answer Match 104.4%

Hi, I'm new here. I joined after searching for my problem and finding that some others had had the same problem but that it was either solved or retired.

I'm on a MacBook running the latest version of Snow Leopard, and I can't print to my four-year-old Canon printer (an MP530) because it says I have a paper jam. The error code it gives is 1300. I've searched everywhere in the printer and opened every door I can possibly find, and I haven't found any paper jammed anywhere - or anything else, either. I'm about ready to dump the printer, but perhaps someone here can help me fix this mystery jam.

When I go to print something, the paper feeds in crooked on the left side, and then I get the jam error. I've felt around in the bottom of the paper feed and I can't find any problem or jammed paper there either. I'm using the paper loader on the back of the printer, not the sheet feeder or anything, and I'm using regular cheap office printer paper.

I read on fixyourownprinter.com about checking the purge unit. Is that something I should try?

Thank you for any help you can give me!
 

More replies
Answer Match 80.7%

Hey Guys
I have a problem that i need some help in, i have a canon mp530 all in one and i have two questions that i hope you guys can really help me out with.
the first question is this: how do i go about resetting all the configerations on the printer to the point like it just came out the box and question #2 is: i also have a regular lan line phone and im trying to connect it to the canon and for some reason its making my phone go nuts. it either the phone rings and the fax dosent pick up or the phone rings and when i pick the phone all you hear a fax ring. i dont know what to do anymore im either going to throw this out the window or just take a dam hammer and smash it to pieces. please help me out here i would really appreciate any kind of help you can offer,

thank you
 

A:Canon Pixma MP530 All-In-One Printer

There is a firmware upgrade from Nov 08 that might be applicable since it specifically is for FAX problems. There is a list of serial numbers that need the firmware upgrade – be sure to read the instructions as firmware can be tricky. http://www.usa.canon.com/consumer/c...tegoryid=2613&modelid=13371#DownloadDetailAct

The latest driver is 1.10 from 2006 that is probably already what you are using.

Probably your best approach for resetting everything to default is to just uninstall the software and reinstall it. If that doesn’t work you would want to check “Printers and Faxes” & “Cameras and Scanners” to make sure they are removed and also look in Program Files to remove any residual folder left by the software. Usually an uninstall and reinstall works fine.

I take it you read the manual and set the machine to FAX/TEL Auto SW.

I take it you have a “land” line for your phone – a LAN is a local network. If it is a DSL line you usually don’t want the regular phone filter on the modem connection. The hookup varies according to the type of DSL – Canon recommends contacting the DSL provider.

If it is just a regular phone connection you could have a poor line connection. I had some modem problems many years ago and also had a little noise on the phone. The phone company traced the problem and I had no more modem problems. The firmware is supposed to help with tha... Read more

1 more replies
Answer Match 80.7%

Hey Guys
I have a problem that i need some help in, i have a canon mp530 all in one and i have two questions that i hope you guys can really help me out with.
the first question is this: how do i go about resetting all the configerations on the printer to the point like it just came out the box and question #2 is: i also have a regular lan line phone and im trying to connect it to the canon and for some reason its making my phone go nuts. it either the phone rings and the fax dosent pick up or the phone rings and when i pick the phone all you hear a fax ring. i dont know what to do anymore im either going to throw this out the window or just take a dam hammer and smash it to pieces. please help me out here i would really appreciate any kind of help you can offer.
if by any chance this is not the place to ask for help on a technical issues, may you please direct me where in the forum should i go to get a answer.
 

More replies
Answer Match 79.8%

I am using Canon brand cartridges because I don't want to void the warranty so I am NOT playing the chip game (yet). I am getting the message that I have two Magenta cartridges in the printer (I do NOT have two Magenta cartridges in there). This message just started appearing and the light blinks fast on the cartridge. I try taking it out and putting it back in. Also have tried shutting the printer completely off for a minute and turning it back on. Sometimes the message says that it can't recognize the magenta cartridge but then it again tells me that there are two magenta cartridges. I've tried printing in just greyscale but it still won't print. I'm getting quite frustrated with this printer after having it less than 5 months.

Can someone please help me????
 

A:Canon Pixma MP530 Ink Cartidge problem

10 more replies
Answer Match 79.8%

I have a Dell XPS 8300, WinXP, SP2 (it's 4 years old). The MP530 was installed 6/23/07 and since that day I've been unable to run antispyware/malware scans of my system. Virus scans are not affected, only spyware/malware scans. I have used several spyware scanning programs including AVG, McAfee, AdAware, etc., and all cause the computer to abruptly shut down with the following Stop Error screen:

"A problem has been detected and Windows has been shut down to prevent
damage to your computer.
PAGE_FAULT_IN_NONPAGED_AREA
Tech Information
***STOP: Ox00000050 (OxFFFFDFF8, Ox00000000, Ox80550211, Ox00000000)"

When I reboot, I get the notification window that the computer has recovered from a serious problem and the details point to a possible driver problem. I checked the Device Manager for problems and there are none. I downloaded and ran the Dell Driver Reset tool and no problems were found. I checked Canon's site for driver updates for this machine, and there are none. I consulted with Canon's techs and they are not aware of this problem.

In my Windows/System/32/Drivers/Spool/3 folder are two files called WrtMon.exe and WrtMon.proc each with the logo MPC and each created on 6/23/07, the same date of the printer installation. No one seems to know what these files are since there is no info associated with them, or if they even have anything to do with this problem. I've been advised to uninstall the Canon all-in-one printer and run a spywar... Read more

A:Canon Pixma MP530 vs Spyware Scans

12 more replies
Answer Match 79.8%

I have a Canon PIXMA MP530 printer with 5 separate ink tanks. The Cayon will not 'take'. The printer will not recognize it. I first thought I just had a bad ink tank & replaced it, but the new one will not work either. There does not seem to be anything wrong with it. Any suggestions?
 

A:Canon PIXMA MP530 ink tank error

http://www.ehow.com/how_6835062_canon-printer-won_t-recognize-cartridge.html

Also try this: clean the chip contacts on both ink cartridge and in cartridge cradle with cotton swab lightly dipped in alcohol.
 

1 more replies
Answer Match 107.94%

Hi All,

My Canon MP530 printer has 2 paper sources; a flat 'cassette' in the base and a near-vertical sheet feeder at the back. There is a button on the front of the printer which allows you to specify where you'd like the printer to take paper from.

When I put 6"x4" photo paper in the cassette, and press the button to specify the cassette, it jumps to the sheet feeder and prints on A4 from there instead. Removing the A4 from the sheet feeder in an attempt to force the printer to use whatever is in the cassette has no effect - it tells me the sheet feeder is out of paper. If I put A4 in the cassette it detects it and prints just fine.

I have been to the printer driver and made sure that the cassette is selected under 'paper source', but this has not helped.

I am using the "Easy Photoprint" software and this allows you to specify your paper size, type etc. I am guessing that this is not a paper pick-up issue (the printer has seen too little use to have coated the pickup wheels, and it picks up A4 ok). I think it is having difficulty detecting the smaller paper size although it used to print 6x4 before without problems.

Anybody know how to fix this? What is the mechanism by which paper is detected, and how might it have failed?

Any assistance gratefully rceived.

Jagger1964
 

More replies
Answer Match 100.38%

I feel like a complete idot here. I got a Canon Pixma MX300 but for the life of me I can't get the paper to feed so that will actually work please help me not to feel so stupid here.

Thanks
 

A:Canon Pixma MX300 Paper loading

The first thing to do when this happens is unpolug and replug the machine, then clean all the rollers. Your manual should have the instructions for that in it. If you don't have the manual it should be available online at www.canonusa.com

These printers usually have a reset that involves holding down the power button. I'm pressed for time atm so try googling for that. Those might help if you've already followed the above steps
 

1 more replies
Answer Match 100.38%

I have a Canon Pixma MG6100. I tried to print on glossy paper and the printer kept jamming. I gave up on printing the photo, but now the printer jams even when trying to print on plain paper from both the back tray and the cassette. Fromboth places, the paper starts to feed but then stops. I can hear the rollers still moving, but the paper is just stuck. I have tried cleaning the rollers as well as cleaning the bottom plate but nothing works. The printer is now useless.
 

More replies
Answer Match 99.54%

I keep getting a "out of paper" error when I try to use the printer. It tells me to load paper into the tray and press the reset button. There is plenty of paper in the tray. I have looked at the paper tray holder while requesting it to print and it looks like the paper is never lifted up to meet the roller, almost like nothing happens. I would try to clean the rubber wheel for the paper pick up but it looks like it never moves nor does the paper ever move to meet the roller. Anyone have any suggestions as to what might be wrong and a possible fix?
 

A:Paper feed problem Canon PIXMA MP780

Found solution on CANON Web Site on how to clean the rollers. Has automatic cycle for this. I will know better next time.
 

1 more replies
Answer Match 99.54%

My Canon Pixma iP4000 prints fine from all applications except Outlook 2003. In Outlook, I set the paper source to casette but when I try to save this it won't save and reverts to sheet feet. Does anyone know how to get Outlook to save my paper source option? I am running Windows XP Pro SP2.
 

More replies
Answer Match 83.16%

Hi,

I bought a MG5450 2 days ago and began setting it up yesterday however stumbled across an issue where the printer driver would not install regardless of the compatibility setting. Being as it's a newly released printer I thought the drivers would be up to date and new, however I think there may be a issue with NT 4.0 driver policy as when I try to install the drivers through the device manager, it gives me that message that there's a policy in place stopping me.

Windows update always fails when trying to install the printer, however the scanner, and software included all work fine. I can scan images on wirelessly and have them saved on my computer without an issue, however there is no way to print.

I have tried disabling the policing through the 'MSC' and adding a local group policy or something along those lines. However none of this has worked. How can I get the driver to install or disable the policy to allow the printer to be installed.

My Printer

Running Windows 7 Ultimate 64x
Tried installation of the drivers both through wireless and wired, both come to the same outcome.

Any other information needed, then please ask.

Thanks!

A:Canon Pixma MG5450 - NT 4.0 Policy: Driver Issue

Windows Update when USB plugged into the computer from the printer.

[IMG]http://s12.**************/52uu8vzil/Failed_Driver_Install.png[/IMG]

Manually trying to install the drivers through device manager.

[IMG]http://s12.**************/wrhhgemj1/Policy_Issue_Driver.png[/IMG]

2 more replies
Answer Match 80.64%

Is there some way of rejuvenating the surface of the "feed Wheels" on an HP DeskJet (T-65) so that they grab the paper better. I tend to think that this is the primary problem in the relentless "paper Jamming" which I am recently experiencing. If I remove all the paper from the tray and feed one sheet at a time, it seems to work fairly well but not if I put several sheets in the tray and let it feed normally.
 

A:HP Paper Jamming!

Get some whales oil and Lube up the Rubber Pads so It will be almost like new but Whales oil is damn Expenisve can cost up to 500 for Canitser
 

2 more replies
Answer Match 79.8%

I acquired a used HP LaserJet 4 printer. It works OK except the paper jams and makes little fans out of the paper. How can this be fixed. Thanks in advance for any advice.
 

A:Paper jamming in printer

Have you tried going into www.hp.com/support to see if there is anything there about the problem? They have an instant messaging service with their tech dept and I think they will probably be able to help you.
vicks
 

3 more replies
Answer Match 77.28%

I have a REALLY bad paper jam... My printer is MF4350d. The paper jam troubleshooting outlined in the manual did not help. When I opened up the toner area and the back end of the printer, I can't see see the paper at all. It looks like the paper is jammed in area that I don't know how to access to (if I can, aside from taking the whole printer apart).

Does anyone know any way to fix this problem? :/ The paper that got stuck was a label paper. I know for sure it is stuck because the paper did not come out at all. The WHOLE paper got stuck. The label paper half half label peeled off. I am assuming that the reason it might have curled up in the printer is due to the disappearance of that half label? :/

The label paper is a regular size paper with 2 labels divided evenly on the paper.

Is taking the printer apart the only way? (is that even safe/good to do on my own part?)

Please help thank you very much.
 

More replies
Answer Match 76.44%

help...
i have a Canon MP530, and it worked great for about a month and now it makes this awful grinding noise when it's warming up etc. the tech at canon said to take all the ink cartridges out and lift up the bar that holds the cartridge case down, then remove it, and put it back together again. well, it didn't help, so he said i'd have to take it in, or mail it in. i never have time to do that, and it doesn't affect the printing, it's just loud and annoying. anyone got any ideas?
 

More replies
Answer Match 76.44%

Can anyone help with the following problem?
When I use the scanning function, the image (text) I get is almost unreadable in the preview pane. Transferring it to email, it still remains the same.
Some time ago I checked with Canon support and they advised me to adjust the MAPI settings in the email program. Got no idea what they are talking about. I don't think it is an email problem as the scan is not successful before sending it to Outlook.
I have adjusted various settings, but the scan is the same - unreadable.
Has anyone else had this problem, and, any suggestions?
Thanks
 

A:Canon MP530 Scanning

7 more replies
Answer Match 75.6%

I have a Canon i850 printer which I have immensely enjoyed using these past four+ years. For one thing, I've never had even one paper-jam during that time.

My understanding always has been that it is best to have separate components, so that's why I've always owned a dedicated printer. However, it appears that the present-day trend is more toward all-in-one units. Actually, I'm in the market only for a printer, but if the Canon MP600 all-in-one is technologically advanced far beyond my i850, then I would strongly considering buying one.

The MP600 has a scanner (which I don't need, although it would provide me with a back-up) and it has several modern features of convenience which my i850 doesn't have. What I would especially like to know is whether or not the MP600 produces appreciably better results with both text and photos than my i850. Also, would it be faster and cheaper in the long run than the MP600? While quality of results is more important than anything else, speed, economy, and convenience also enter into the equation.

(I was also considering the Canon PIXMA iP6700D photo printer, but from what I've read so far it appears that the MP600 all-in-one is more highly-regarded.)

I would appreciate hearing from anyone who has an opinon on this matter. Thank you very much.
 

A:Canon i850 printer vs. Canon Pixma MP600 All-in-One

9 more replies
Answer Match 75.6%

I have two laptops and a desktop to which the laptops are wirelessly connected. All are running Vista 64 except the one laptop which is running Vista 32. The MP530 is USB connected to the desktop. I can print from the desktop just fine and, until a couple of days ago, I could print from both laptops. One laptop seems to trigger a failure of the driver to work on both the laptop and the desktop. If I restart the desktop the printer works fine until I try to print from the laptop. I have reinstalled the printer on the laptop and it prints a test page but nothing else. Any idea on how to cure this?
 

More replies
Answer Match 75.6%

Has anyone been able to get a Canon USB printer (MP530) to work if their system drive is anything other then C:\

Doing a complete re-format for a printer seems asinine.

I see the "USB port" file created in what would be the C:\ drive (C:\USB port), but the registry has no knowledge of it as that I would just move it to the system drive and edit the registry to point to it.

Any ideas other then the obvious of reformat/re-install?
 

A:Canon MP530 & system drive other then C:\

You'll find many programs demand there be a C drive, there's no way to re-assign the that drive letter without nasty registry hacks and they don't usually work anyway and sometimes end up corrupting the system and rendering it unbootable.

The trick to avoiding this is to disconnect any and all removable media drives from the computer prior to installing Windows.
 

1 more replies
Answer Match 74.76%

I recently bought the supposedly excellent Canon MP530 multi-function printer,etc. and went to install it on my WinXP pro machine and . . . nothing. I've spent some time with Canon tech support (some helpful, some not so helpful) but I still can't get the freakin' things to communicate with each other. The consistent result of my installations is "no driver is installed" or "cannot find driver" - even though the driver itself seems to install. Also, when I turn the printer on, I get the New Hardware Wizard, which, I think, means my computer is detecting the printer. It's as if the driver is just not recognized by my computer.
I've installed (and uninstalled) the drivers from both the disc that came with the printer and from the Canon website. I've used two different USB cables. I've tried many combinations of plugging/unplugging, starting/restarting, turning on/off - all to no avail.
I've logged on as the Administrator. I've done my best to shut down any programs or processes- though I think this is tricky, as I don't necessarily know what each thing in my Startup or Services is. I've even tried installing from SafeMode. I've tried using the New Hardware Wizard; I've tried ignoring the New Hardware Wizard. I've received a few error messages, but only when attempting the full installation from the disc. The messages are: "AddPrinterDriverEx Error:2", "AddPrinter Error:1797&... Read more

A:WinXP Canon MP530 driver problem

16 more replies
Answer Match 74.76%

Looking for a new printer? Be advised-
I too am having a now-familiar problem with my new (5 weeks old) Canon printer. I searched here and found other cases like mine, i.e. error message "more than one ink tank of the following color is installed..." It isn't true, hasn't been a problem for the first 5 weeks, and it prevents the printer from working. See thread :
[SEARCH="14-Jul-2007 02:15 PM - Canon Pixma MP530 Ink Cartidge problem"]

Choosing a printer has always been a lot like voting for a president. You know. V
 

A:Solved: Canon MP530 ink tank message

I have the same problem. The yellow ink cartridge is original equipment that came with the printer when I bought it about five weeks ago. Worked fine and now I get the error message saying there is more than one ink tank cartridge (yellow) installed. Is there a solution provided by Canon or anyone short of throwing away a nearly full yellow ink cartridge and installing a new one!

Bruce
 

2 more replies
Answer Match 74.76%

Let me start off by saying I did this to myself, I did not pay attention.

I rebuilt my system this week and this morning needed to scan something. So I pluged in my MP530 and downloaded the new driver for windows 7x64. I also grabbed the firmware "update" off their website. Here is the link.

http://www.usa.canon.com/consumer/c...oadDetailTabAct&fcategoryid=334&modelid=13371

So installed the drivers scanned the documents and printed out a few copies. Everything works fine. Then I remembered oh yeah that firmware update. I did read that if it was a specific model it would not be necessary, but I did not know the firmware version I was running figured it would say "Oh wait sorry but you don't need this." like most other firmware updates. So extraced the files and on I went ran the executable and set the install. Went out to lunch and forgot about it.

When I came back it had errored out, I looked in the to right corner only to then realize I was trying to upgrade from 1.10 to 1.08 and it was not compatible apparently. I figured old firmware is better than no firmware so I tried it again and of course failed again. At this point my printer is not responding at all and so I figured I'd have to call Canon to get the appropriate firmware. They proceed to tell me that they can not give it out. It's a private company firmware that they (Tech Support) can not access and yes it was a supervisors supervisor hat said this.

So what can I do ... Read more

More replies
Answer Match 74.76%

Hi. I'm new here..wonder if someone can answer this. My Canon MP 530 all in one printer has a feed switch problem. When I flip the switch to the cassette so the paper prints out the bottom (instead of the top feed) even though the switch and light indicates it's in the proper position the paper will only print out from the top. I like to keep regular paper in the bottom and my shipping labels up top. Does anyone know what the problem could be or how to fix this. It was fine yesterday and just started oing this today. Thank you very much.
 

More replies
Answer Match 73.92%

I've had my Canon Pixma MP600 for 4 years. It has always worked flawlessly. But I turned it on today, and it gave me a weird error message about some "incompatible device" being plugged in. There was nothing plugged into any port on it. I did a search and found where someone who had the same strange message said it was because of a stuck lever in the paper path, and the way to unstick it was to fold the top 1cm. of a heavy piece of paper, slide it in the back of the printer across the top rubber rollers with the folded 1cm facing up, then pull it out. Said I would feel resistance and a click when pulling it out, which I did.

So what did that do? It replaced the "incompatible device" error with a "paper jam" error. There is NO PAPER JAM!! I see from my search that this seems to be a common Canon printer problem going back to the low-number Pixmas, but I have not found a fix.

Anybody know what I need to do to fix this thing, other than taking it to a service depot and paying twice what a new one would cost to get it fixed?
 

More replies
Answer Match 73.92%

About three hours ago I tried printing from Word to my Canon MP530, which has been working just fine since I switched from XP to Win7 in mid-December. I got an error saying that there were no drivers installed.

I tried the Windows Update method to reinstall them - that failed. I went to Canon's site and got the current x64 version of the driver. That supposedly installed, but when I try to print anything including the test page I see 'printer not responding' in the print queue window.

In the Devices & Printers window it tells me I need to troubleshoot it. Running the troubleshooter tells me there's nothing wrong with it.

I tried removing and reinstalling the printer with the same results, also trying the new drivers.

I just got the firmware upgrade from Canon and have installed that; that didn't help either. It still wants me to troubleshoot it, and that has the same results.

Please help me. I really need to get some work done today, and I really need my printer to be working.

A:Canon MP530 printer stopped working, no drivers?

  
Quote: Originally Posted by kanjigirl


About three hours ago I tried printing from Word to my Canon MP530, which has been working just fine since I switched from XP to Win7 in mid-December. I got an error saying that there were no drivers installed.

I tried the Windows Update method to reinstall them - that failed. I went to Canon's site and got the current x64 version of the driver. That supposedly installed, but when I try to print anything including the test page I see 'printer not responding' in the print queue window.

In the Devices & Printers window it tells me I need to troubleshoot it. Running the troubleshooter tells me there's nothing wrong with it.

I tried removing and reinstalling the printer with the same results, also trying the new drivers.

I just got the firmware upgrade from Canon and have installed that; that didn't help either. It still wants me to troubleshoot it, and that has the same results.

Please help me. I really need to get some work done today, and I really need my printer to be working.


If it just stopped working like that, do not discount the possiblity that it may be time for a new printer.

3 more replies
Answer Match 73.92%

I hope this is the correct place to ask my question--none of the choices seemed to really fit printing problems, but here goes.

I have a Canon MP530 printer. It's about 2 years old. I don't print pictures with it often, but recently have noticed that printed photos come out with white horizontal lines all down the page, about 1/4 inch apart. I've tried 3 different papers, and the problem is the same with all of them. Any suggestions? I run Windows XP.

Thank you,

Laura
 

A:Solved: Canon MP530 photo printing problem

8 more replies
Answer Match 73.5%

My Canon MP610 printer continues to give me a jamming error when there appears to be none. Message is Error Paper output slot The paper is jammed Clear the paper and press ok.
I had printed a couple pages with no evidence of a problem. No crunching or ripping of printed page. When the error message appeared I noticed the feed switch light was designating a back feed when I never use it. The back door was shut. I can not get it to toggle to the top feed. I have unplugged from power and waited. Restarted and paper will feed from top and from back. Although feed switch light is lit for back feed. I even fed a thicker piece of paper through the back and top feed hoping it would trigger something. My start/reset button seems to be ineffective. I have also held the back feed door closed tightly with my hand to see if the door was tripping something that made it appear it was open.
I am not experienced in printer repair to say the least and would hope I don't have to take it apart!! I have also checked the ink levels and they appear good.
From my searches it appears to be a common problem with this printer but couldn't find anyone with a solution. I have had it about 2 yrs but I have hardly used the thing. Any solutions other than throwing it out onto the my concrete drive??
I have an Apple desk top
Thank you
 

More replies
Answer Match 68.04%

My Canon Pixma IP4200 is flashing the light on the resume button 5 times. I hve tried resetting, switching off, restarting computer to no avail. What else can I do?

A:Canon Pixma

Press theResume button when the button is blinking. If that fails, unplug the USB cable and the power cable from the computer end. Wait a few seconds and plug the power cable in. Wait a minute and plug the USb cable in.

3 more replies
Answer Match 68.04%

I updated my driver for this printer in order to use it with a new VISTA computer. In doing this, my XP laptop, can no longer use this printer. Is there a simple solution to this?

A:Canon pixma MP 780

Updating drivers usually doesn't affect the hardware itself. Its strange that it simply stopped working because you installed vista drivers on another computer. My Pixma was simply a plug-and-play from my vista desktop to my XP laptop.

Can you provide more detail? Does the computer detect the printer but it simply doesn't print? Or is the printer undetected completely? Maybe you could try uninstalling then installing new drivers for it.

Canon Australia - PIXMA MP780

4 more replies
Answer Match 68.04%

Canon PIXMA250 Series Multifunction Printer prints test every time.
 

A:Canon PIXMA 250

Prints the word "test"?

Prints every time you turn the printer on? Every time you try to print a document or photo? How does this event relate to Vista?
 

1 more replies
Answer Match 68.04%

I have an error message E2 that stops me using my printer as i live in Thailand and the instructions are in Thai I can't overcome it. I have tried some of the sites that give the switching and resets for various thing such as Waste tank but to be honest I'm not sure what they are or what they mean, I have followed the instructions but nothing happens, it says that it is out of paper or jammed but I can't find one its clear. Please help I'm desperate to get some work done
 

More replies
Answer Match 68.04%

I am running Windows 7 in a virtual environment using Parallels on my iMac intel.  My Pixma printer shows up in the printers list in Windows but refuses to print.  The documents are neatly lined up in the queue but nothing happens.  I have looked for new drivers and can find none that I have not already installed.What to do?

A:Canon Pixma MP 470

 
Hi,
 
Canon has not released a Windows 7 driver for your printer.
 
You can try the latest driver for Windows XP or Windows Vista from here:
 
If the issue persists, I am afraid you have to wait for Canon to release a Windows 7 driver.
 
Tim Quan - MSFT

3 more replies
Answer Match 68.04%

I use Canon Pixma printer with Windows 7. When I want to scan and e-mail the colours of my computer change radically. I cannot get a full picture reproduced either. Only part of it is reproduced. I had to do a system restore to get the computer to remove the ugly colours. This is the second time that it happened. Please help.
 

A:Canon Pixma

As regards not being able to reproduce a complete picture, try reducing the 'PPI' setting in your scanner software prior to scanning. Whilst 300 ppi is considered the optimum setting for photo scans which you intend to print, that's way too high for an email. Try scanning at 150 ppi or even 100 ppi if it's only for an email attachment.

The scanning time will then be much shorter and there will only be half as much data for the PC to cope with (compared to scanning at 300 ppi).
 

1 more replies
Answer Match 67.62%

Windows Xp

I have used my Canon MP500 for two years. It prints OK but it won't scan. About 18 months ago it completely disappeared from my computer. I tried to take the computer back to a date when it worked but it wouldn't allow me to do so. After reloading it twice it finally worked again. Now it has disappeared again. When I find Omnipage the message comes up "The parameter is incorrect"
Why does it suddenly disappear? I can't think I have done anything to make it do so.
 

A:Solved: Canon Pixma MP 500

7 more replies
Answer Match 67.62%

Hey peps.

anyone have this driver for Windows 7 64 bit? i couldn't find it for the love of God. only found that utility stuff on their site.

A:Canon Pixma IP4200

1. Use Windows Update, it will install the driver automatically
2. Install driver add-on and software from canon website

8 more replies
Answer Match 67.62%

I have a Canon Pixma mp280 printer that I've used for a few years. Suddenly, when I go to print something from my computer, it doesn't even show my printer as a printer option. I can't find the hardware for my printer. It still scans and prints that way, just not from computer. Help.
 

A:Canon Pixma mp280

Uninstall the Canon software/drivers, reboot, and perform a fresh install following the Canon process.

You can use the install CD provided with the printer, or the better option would be to get the latest driver package from Canon.
 

1 more replies
Answer Match 67.62%

I can print pictures that are on my Samsung laptop, using my Canon Pixma MP620 with a USB cable, but when I try to scan a picture and send it to my laptop, nothing happens. A window opens asking me what device I want to use and only shows my old Epson (which I no longer have) When I go into the control panel & click on hardware and printer, it shows my Canon MO620 and has a green checkmark by it so I'm pretty sure it's capable it just won't cooperate! Thanks for any information!
 

A:Using a Canon Pixma with Windows 8

Does Devices and Printer also list the MP620 listed as a scanner? My Canon MX490 Shows up 3 times as Printer, Fax, and Scanner. I yours does not show as both a printer and a scanner, you may need to reinstall the driver software.
 

2 more replies
Answer Match 67.62%

Urgent help please.

This printer normally connected through USB to pc running Windows XP in room 1.
2nd wireless pc running Windows 7 Ultimate 64bit in room 2.
Connected printer through USB on Win 7 pc and windows updated drivers ok and everything printing ok.
Then re-connected printer to XP pc ( in different room ) and set up printer and file sharing.
When adding printer wirelessly to Win 7 pc the windows update cannot find any drivers for this model and yet it does when running through a USB connection!
Can anyone tell me where on the Win 7 pc I can locate the drivers that were installed when printer was connected via USB or how to get around this problem? Drivers that can be downloaded from internet seem not to have an INF extension which Win 7 requires for installation.

May be being dense but can you tell me what I should be doing?

A:Canon Pixma iP4200

hi maureenmcn ,welcome to the forums , have a read of this thread Canon Pixma IP4200 it may contain the information you require

5 more replies
Answer Match 67.62%

Hi

I just installed Windows 7 and my printer doesn't seem to work.. Its a Canon pixma MP160.. i guess i have to install the proper drivers.. could someone help me out with this?

A:Canon Pixma MP160

  
Quote: Originally Posted by jana


Hi

I just installed Windows 7 and my printer doesn't seem to work.. Its a Canon pixma MP160.. i guess i have to install the proper drivers.. could someone help me out with this?


You should be able to install the Vista drivers for it.

2 more replies
Answer Match 67.62%

My Canon PIXMA MG6120 doesn't print the text in a document containing both text and photos. I think the driver may be incorrect, but am uncertain which driver to load from the Canon website. I am running Windows 7 Ultimate 32 bit on an HP TouchSmart 600-1050. Any suggestions?
 

More replies
Answer Match 67.62%

Bought a Canon MP 750 on Wednesday. Seems to print well, but not happy with the results of walk up copy and also scan to computer/print.

Original printing from the computer, print alignment, print nozzle checks etc are all OK. It seems there is a problem with the scanning - copies come out significantly less colour intense, at times with bits even missing from the copy.

Rang Canon for support and returned machine to store on Friday & got a second one. It seems to fare no better.

At this stage I will be ringing Canon again on Monday - but in the meantime I'm interested to hear from anyone else with this machine.

Can anyone tell me what happens when you select the copy button, and then "colour"? Do you get the following message:

Colour copying......

or do you get

Scanning.....

followed by a request for the next page or to click OK to exit?
This then followed by

Colour copying....

as above?

The reason I ask is that on the first machine we only ever got "colour copying" followed by the scan and the print out.

On the second machine, the first two times we did a copy it gave us the scan message on the display first, followed by the copy message. However from the third copy on it has always only ever been "colour copying...."

If I use the software to scan into the computer I can set different scanning resolutions....but when I print out I don't see any marked improvement.

The above was using the image quality "normal&q... Read more

A:Solved: Anyone own a Canon Pixma MP 750?

bump
 

2 more replies
Answer Match 67.62%

Hey Folks, I have a Canon MP160 and I am trying to print photos, but they always come out redder that I want, I found some NTSC Color Bars and printed them and Magenta is purple and red is deep orange, I did a monitor calibration with a Spyder Pro and thought that corrected the problem but to no avail, any suggestions?
 

A:Canon Pixma MP160

what kind of printer are using
are you using the correct profile for the type of paper

getting a print to look like it does on your monitor requires carefull calibration and printer profiling

http://www.google.com/search?hl=en&q=printer+profile
 

1 more replies
Answer Match 67.62%

mp navagator requires 800x600 or higher resolution and higher colour
(16 bit) or better mode

ps my bios was upgraded now my mp navagator doesnt work
 

More replies
Answer Match 67.62%

How can I troubleshoot the waste ink full?

I have already tried cleaning and replacing the foam but when I am going to print again, there is this waste ink full window that shows up.
 

A:Canon Pixma IP1000

Look for a plastic bottle of some sort and empty it out. (Not the toner cartridge!!!)
 

2 more replies
Answer Match 67.62%

Error code 5100. Recommended action to turn off printer and turn back on again. Does not work. Any ideas?
 

More replies
Answer Match 67.62%

I have istalled the latest driver and program from Canon support site.
But I get the bluescreen with the error:
STOP: 0x0000009C (0x00000004, 0x00000000, 0xb2000000, 0x00020151) ...

The driver to the printer Canon Pixma ip4500 should work with Vista x64.

I have Windows Vista Ultimate x64.

Please help me.

A:Canon Pixma ip4500

Hi Spiderfreak!

Here is a link to Canon website for the latest Canon driver. Just pick your printer from the list then choose the OS (Vista x64) and download/install. Hope this helps.

Since you did not specify you got your driver from their website I figured I'd look.

Download Library - Canon USA Consumer Products

Raj

1 more replies
Answer Match 67.62%

Hello Friends,I.m facing a ‘printer problem’ My o/s is xp home sp3 and I have a Canon Pixma IJ 1600 printer connected which was working fine till date.All of a sudden , it has stopped detecting my color cartridge.Whwnever I start printing, I get the following error message:-

“The color cartridge can not be recognized.Install the appropriate cartridge”
I have uninstalled rhe cartridge several times,removed the printer and driver and then reinstalled it but to no avail.I do.nt know what to do?Please help.thanks
 

More replies
Answer Match 67.62%

This is an extremely basic question ...

I only turn my printer on when I need to use it, which is not too often. By chance, I happened to look at Control Panel/System/Device Manager/Disk Drives while it was connected, and I was quite astonished to see the following entry:

Canon MP600Storage USB Device

followed by all my regular HDs (3 in all).

Is this normal under VISTA? I ask as I have some problems with certain USB-attached devices, and am trying to isolate the problem.

Thanks in advance.

More replies
Answer Match 67.62%

Hi,

I have installed driver (b6C05MUx.exe) for Canon Pixma iP5200 which
Vista does not recognize.
The driver was downloaded from Canon and is compatible with my Vista.
Please advice how to make the printer work.

Thanks,
Martti

A:Canon Pixma iP5200

Hi, On the Canon site it is this driver ip5200vst200ej.exe here is the link http://support-au.canon.com.au/EN/search?c...p;menu=DownloadMake sure you get the Vista driver.Uninstall the canon printer before installing the new driver and follow the install instuctions as you have to install the printer following the correct steps.

2 more replies
Answer Match 67.62%

Guys i just bought All in one Canon PIXMA MP230 ! And i installed it as the manual guide says ! but after installing it , i cant use the scanner !! the printer and the copier are working fine ! But when i press scan document or use the IJ Scan Utility to try to scan a document i get this error .
I have uploaded the error in a picture so you can see it guys and help me !
Thank you so much.
 

A:Need help with Canon PIXMA MP230

You have the latest drivers and software?

http://www.usa.canon.com/cusa/support/consumer
 

2 more replies
Answer Match 66.78%

This is my first post so please forgive me if I have not followed the correct procedures.
I have a Canon Pixma iP5000 printer. It worked fine for about one year but now has all print jobs have a pink colour, to the partial exclusion of blue. I have tried all the suggested maintenance procedures, alignment, clean print heads etc and I have checked the installation of the print cartridges. I have also re-installed the software.
Any help and suggestions would be appreciated.

Mike
 

A:Solved: Canon Pixma iP5000

16 more replies
Answer Match 66.78%

Has anyone ever run into this crazy problem? I have a Canon Pixma 4300 that I got bundled with my MacBook pro. It's been sitting on my desk inert ever since. I cannot get it to print anything, anytime. I have uninstalled and reinstalled the drivers at least twice, reset the printer... I don't think it's a communication error because my laptop sees the printer, can check the ink, etc. Once I reinstall the drivers I can always print a test page exactly once, then never again. I get no error messages. Nothing.

Opening the print queue box it shows what ever job I'm attempting to print as "printing" but the printer never actually prints anything. If I pull the plug on the printer with a job in the queue I get a "can't communicate with printer" message, which tells me communication isn't the issue.

I'm running OS 10.6.8 on a 2007 MacBook pro. I know it's not my laptop since I've never had any problem with any other printer, including a PIXMA Pro 9000.

I'm thinking there's something either super easy to fix or that this printer is just a lemon that needs to go in the trash. Canon has been very unhelpful. Every once in a while I'll dust this thing off and try to make it work. Is it time to give up?
 

A:Canon Pixma ip4300 has NEVER worked

6 more replies
Answer Match 66.78%

My Canon Pixma MP series printer is not working.

When I turn it on, it makes a shuddering noise and then flashes the codes E 3 on the display. It makes the same sound then when I turn it off.

Writing to Canon, they thought it was a paper jam which is more or less impossible as there is no paper in the machine. Then they advised to disconnect the printer from the power supply to reset it. This hasn't worked. Their final suggestion is that there is a hardware fault. However, as there is only one service centre in the UK, by the time I can get it fixed (even though it is under warranty), it would certainly cost quite a bit in postage...

I've been advised by others to try cleaning the chrome bar which I have done now and to try and force a bit of thick paper through to clear out any remnants which may be in there. I'm not sure how I would accomplish this as there is no form feed button and it has never been easy to make it grab the paper anyway...

I've since been made aware that these phantom paper jams seem to be a common problem with Canon Pixmas... I heard someone could fix them by removing and replacing the paper tray which would be easier if I had a front-loading machine.

Any advice which will save me buying another printer would be much appreciated.

Thanks.
 

A:Canon Pixma MP150 problem...

7 more replies
Answer Match 66.78%

My Canon PIXMA MX700 Printer isn't functioning as a network printer. During installation of it as a network printer, what it does is say "Communicating with printer." for a while and
then it says "The printer in the network could not be detected
automatically. Set the IP address of the printer to be connected." And no
matter what I select it starts over with "Communicating with printer." I corresponded with Canon via email, but in the end they just said to call their technical support. The printer is wired into the modem and plugged into the computer via USB, so I don't get the problem.

A:Canon PIXMA MX700 Printer

On my Canon MX870 I use the wireless connection but there is also an eithernet port. I believe what you are seeing is the wireless wizard attempting to connect wirelessly to the printer.

If you are using the wired or wireless connection you should not need to use the USB connection on the printer. Perhaps this has something to do with the problem?

Does the printer show up on the Windows 7 network map? Does it show as being connected in the routers settings?

7 more replies
Answer Match 66.78%

The printer won't start and the YELLOW ALARM light is flashing.

The Canon Troubleshooting Guide advises to count the number of flashes and then refer to the User Manual.

I cannot find anything in the User Manual that indentifies errors in terms of number of flashes.

Anyone know where to find these error messages ?

TiA

T.
 

A:Canon Pixma MP620 Error

Is this a new printer or one that you had working previously?
What OS are you running?
 

3 more replies
Answer Match 66.78%

I have had to upgrade PC to Windows 7 64 bit and now cannot find software to instal to use the scanner option.
Is there any software available?
I have tried Canon site but incompatible and won't load.

A:Canon Pixma MP210 and Windows 7 64 bit

Hi Welcome to Seven Forums .. Did you try the Drivers in the Link below ? ...

Canon U.S.A. : Support & Drivers : PIXMA MP210

5 more replies
Answer Match 66.78%

I recently bought this Canon product and it worked very well for about 6-7 months, but when we came back from vacation the black color faded and and gradualy disappeared.
I took the cartridges and the print head to the guys that refilled my cartridges (no problem here only second refill no leaks or dryed ink problems) and they told me that the printer head was clogged and that the pump that was responsible for the cleanining and deep cleaning funtions was not powerfull enough to unclog the head.
They unclogged the print head and it worked fine for the next 4-5 pages. By the 6t page black vanished again. I took the printer head back to the guys and they told me that it doesent have a problem .

So one out of two:

1. It's indeed clogged and i need to know what i can do to unclog it
2. The printer head is uncloged .... and i don't have a clue what i'm supposed to do now except posting on forums .

Thanks in advance.
 

A:Canon Pixma MP520 Problem

The print heads on the 520 are odd ones, if not unique for this type of machine from Canon - most of the other #8 based machines have the Black #8 in them as well - the MP520 doesn't, and uses that large #5, which is meant for text printing as its black - this is not the normal photo ink, which the #8s have in them, and is a bit thicker than the other colors (including the #8 Black). This means that it will clog a bit more often, including deeper clots between the actual head and the cartridge. What the refillers are using are flow sensors, which only detect if the ink is moving through the assembly, not if they are impeeded, and do so with a bit more pressure than what the printer normally generates.

What does all this mean? Well, here's what I would do...

1 - Using 409 or Fantastik (NO WINDEX) and a Q-Tip, I would clean all electrical contacts between the print head assembly and the printer (all those spots on the face of the print head, and all the little wire contacts inside the machine) to make sure no ink overspray is causing faulty print quality.

2 - Ye Old Desert Dish Trick - Take a desert dish and put a layer of 409 or Fantastik on it, and lay the PRINT HEADS into it (DO NOT SUBMERGE THE ASSEMBLY INTO THE 409 or FANTASTIK - only the print heads on the bottom) While it sits, make sure you keep the ink cartridges sitting in their respective slots, as you don't want the top of the print heads drying either. Come back an hour or so later and scrub the h... Read more

1 more replies
Answer Match 66.78%

I just got my
Canon PIXMA MG6450 out the box that my new job bought for me. I've pulled the tabs out as directed, plugged it in, the orange triangle with a bolt in it light is on, and when I press 'on' it does nothing. All other forums on the Internet keep saying 'go into settings..' Etc but it's literally not turning on to do anything. No idea with technology and don't know what to do any help greatly appreciated!!
 

A:Can't set up and turn on Canon PIXMA MG6450

You've posted your question 2 times, that is not allowed. Please only start one thread per issue. The thread in Hardware is in the right section so I'll leave that one open.

Link: https://forums.techguy.org/threads/unable-to-set-up-brand-new-canon-pixma-mg6450.1155878/
 

1 more replies
Answer Match 66.78%

I have a simple question that i cant seem to find a solution for. I have a Canon Pixma IP 6600 Printer. When I print borderless and the paper is taken from the upright feeder rather than the cassette no matter the size of the paper there is always a white line on the paper on one side. This line is not straight it is crooked across the paper. I use Canon Paper and when I emailed Canon this question I got a useless form letter in reply. Can somone help me. Thank you.
 

More replies
Answer Match 66.78%

When i print a black and white mostly with small amount of color in the text only the color comes out with no b&w. I can copy a document with no problem so i know it is not an ink or nozzle fault. Any solutions please
 

More replies
Answer Match 66.78%

Recently purchased a new laptop. During installation of above printer I received a message that I should contact Microsoft for a new scanner driver for the printer. Have looked everywhere on Microsoft website without any luck in finding a driver for Windows Vista Home Basic operating system.

Can you help?

Thanks
Judy
 

A:Canon Pixma MP 150 Printer Driver

Here is the correct web page for printer driver download
http://software.canon-europe.com/products/0010247.asp

If you have any problems with regards to conflicts etc just come back to this same thread and most folk will be able to assist further.
 

1 more replies
Answer Match 66.78%

Hi folks,

This is driving me nuts: Back in the fall when I switched over to Windows 7 Home Premium x64 from Vista Home Premium SP2 x64, I installed the software for my Canon Pixma MX700 multifunctional printer. I used the original Vista driver installer disc, and despite an warning message about a "known compatibility issue" the printer and scanning functions worked fine. I use the Pixma on the LAN via a wired ethernet connection. Worked fine for occasional scanning in November, December, and January.

Then for months I had no need to scan anything, just printing over the network with no problems.

Last weekend I needed to scan something. I usually just push the scan button on the printer, verify the computer it's going to scan to (it lists them), and away it goes. This time my computer threw an error about the scanner driver saying the scanner wasn't on the network. Huh? If the scanner's not on the network how did the computer know it was trying to send a scan... So I bailed on that and instead used the MP Navigator EX software on the computer. It failed too, giving the "scanner not connected" error, either using Navigator's direct interface or telling it to open the scanner driver which brings up a slightly different interface (when it worked).

First I went to the Canon site and d/l'ed all the latest drivers for 7 x64 and installed them. Still get the same errors.

Tried setting it up to scan via USB temporary connection. If I install it that way... Read more

A:Can't scan with Canon Pixma MX700

I had this problem too & I also have a MX 700. I didn't have quite the probs your having, but when I went to scan something, it would just sit there doing nothing.

The way I found after playing around with it was like this:

I had to go to Start/Devices and Printers.

I R clicked on the printer/scanner and clicked "Start Scan".

Once I did that, it worked for me. You'll get a window with all the options for scanning. For some reason Windows took over the scan feature, but it works, so I'm happy.

Mine is hooked up via USB also, but I'm not on a x64. Driver prob maybe?

Anyway, that's how I got mine to scan, I hope it helps.

9 more replies
Answer Match 66.78%

I just installed new color and black and white ink cartridges and now all of my emails and internet print jobs are printing in a light blue - documents in Word print fine in black and white. The nozzle check printout only showed light blue and black. Does this mean that my ink cartridges are faulty? It was working fine prior to replacing both cartridges. Thanks.
 

A:Canon Pixma MX330 Problem

If you perform a test print, you should get a quality check of each color (ie: red/yellow/blue and black or magenta/yellow/cyan and black). If you aren't getting a proper test print, the ink is low/empty or the print head is clogged). There should be cleaning and deep cleaning options in the printer options. You can attempt cleaning until the test print is correct.
 

1 more replies
Answer Match 66.78%

For long distance calling I use a calling card which requires first calling the card company, using an 800 number, where I am asked for my card number followed by either "1" or "2" and then the number which I wish to call, also followed by a "1" or "2". Can someone tell me the series of steps which I need to take in programming in this sequence of numbers into this Canon MP780 printer? TIA.
 

More replies
Answer Match 66.78%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Pentium(R) CPU 2020M @ 2.40GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 2
RAM: 3985 Mb
Graphics Card: Intel(R) HD Graphics, -2039 Mb
Hard Drives: C: Total - 458597 MB, Free - 382225 MB;
Motherboard: Gateway, EG50_HC_CR
Antivirus: Windows Defender, Disabled

Previously used above mentioned all-in-one printer in the Windows XP operating system on my Dell 2400 Series machine. All applications worked. Tried to move printer to current computer within the Windows 8.1 environment. I can print and make copies with no problem. However, the scanner application does not function. Spoke with Canon technical support and did several tests including uninstalling, re-installing and rebooting system with no solution. Checked the Microsoft web site and spoke with technical support with no solution here as well.

Can anyone enlighten me as what is the possible solution for this issue? Thank you.
 

A:Canon Pixma all-in-one printer MG2120

6 more replies
Answer Match 66.78%

I have just bought a Canon PIXMA MP220 printer, I have followed the instructions to the manual book but when I go to print from using an example in Word, it comes up with the error 'Printer not responding'.
I have no idea what it can be, I can't register my printer either because I cannot the serial number on my printer at all.

Help please?

Thanks guys.
 

A:Help! Canon PIXMA MP220 printer.

9 more replies
Answer Match 66.78%

I have just purchased a mp620 and have been trying to install it for the past 2 hours!!!

First I let win7 try to detect it, but it could not print out a test page due to "printer not responding" error on the print queue. I tried to trouble shoot, but this was pointless.

So then I tried to install with the supplied CD. this was even worse. I could not get past the printer detection phase - the printer was switched on, and the usb was plugged in, but it could not detect.

I tried swapping it out with a different usb cable to make sure it wasn't the cable, but still nothing.

I then tried to install the latest mp drivers from the canon website, rebooted, but still nothing.

does anyone, and i mean ANYONE, have any ideas what i can do?!?

More replies
Answer Match 66.78%

Anyone know why my magenta cartridge gets contaminated with black ink when the printer is left unused for a few hours?
 

A:Canon Pixma iP4200 ink contamination

Sounds like the black cartridge may be leaking.
 

3 more replies
Answer Match 66.78%

Did everything instructed for troubleshooting printing problems i.e. all maintenance, print head alignments (including manual alignment) etc. Printer will NOT print black and white TEXT. I have all new cartridges including black. Color prints ok but no black and white text printing. What could be the problem here?
 

A:Canon Printer - Pixma iP6600D

Your print head has likely failed. Thats the piece thats under the cartridges and it is removal to be cleaned or replaced. Instructions for manually cleaning the printhead can be found here: http://www.inkjetoasis.ca/io_help.asp

To order a new print head you can call Canon @ 1-800-OK CANON, I think its about $70 but if you like the printer then its worth it since most new Canon's use considerable more expensive cartridges because they have the print head built into the cartridge.
 

1 more replies
Answer Match 66.78%

I have a canon Pixma ip 1600 printer and been using refilled cartridges.All of a sudden my printer has stopped detecting color cartridge and as such I can not print blck prints either.No amount of hardare/software settings would do.
Is there any way by which I can take black only prints, using black cartridge only? Any method for bypassing the color cartridge completely?
Any advise is most welcome.
Thanks
 

More replies
Answer Match 66.78%

Can anyone pint me in the direction for the Canon software for a Canon Pixma IP5200. I want to be able to once again print onto DVDs but cannot. I have aprint driver installed that works, but the Easy print toolbox and CD label print software from Canon won't install
Thanks

A:Canon Pixma software and drivers

I used Vista Canon drivers for mine... Running them in Vista Sp1 compatibility mode and installed as administrator... Worked for me.

3 more replies
Answer Match 66.78%

Hi, i'm having problems with getting my scanner/printer to do anything. To begin with whenever i turned it on the LCD always said

"Printer error has occured. Turn off power then back on again. If problem persists see the manual"

and so i turn it off and the message only reappears, it seems to not be able to load properly.

I did get it to load once or twice, (how it hapenned is beside me) and successfully printed something off, but on attempting a scan the same message came up midscan. Now i'm back to square one, with only ever seeing the error message all the time and the printer/scanner giving me no options and not loading properly.

Does anybody have any good advice?

the driver discs also told me that the driver cant install properly either, am i likely to have these problems if my laptop only has Windows XP? Also, for some reason i think it only loads properly if it's been left off for hours, why is this?

thanks xxxxx
 

A:Canon Pixma wont boot!

10 more replies
Answer Match 66.78%

I have a Canon Pixma 4200 printer OSwindows XP.How can I make sure that only black ink is used for printing pages of text?
 

A:canon Pixma 4200 printer

you may not be able to
if you look at the printer properties and all the settings in the driver - look to see if there is a black only option - if not then it wont
I have tried this on a few printers for people and not found the setting - and the printer for black uses the colour ink
2 family members had this issue - where they did a LOT of text printing , reports and business documentation from home and used NO colour and had to replace colour inks
 

3 more replies
Answer Match 66.78%

My Canon Pixma iP3000 printer worked fine when connected to my HP Vista computer. Now I have an HP p6616f-b with Windows 7 (64 bit) and I cannot find definitive info on the web as so whether or not they're compatible with one another. If they are, I'd need new software. Anyone know if compatible and where I could get software? Thanks
 

A:Canon Pixma iP300 compatibility with Win 7

Have you tried the Canon website?

Here's the link: http://www.usa.canon.com/cusa/suppo...xma_ip_series/pixma_ip3000#DriversAndSoftware

The printer is compatible and Windows will download the driver from Microsoft Update as per the information from the above link. You can download additional software from the Canon website for it though from the link above.
You can also check the Microsoft Compatibility site located here: http://www.microsoft.com/en-us/wind...Path=pixma ip3000&Type=Hardware&tempOsid=win7
 

2 more replies
Answer Match 66.78%

When I try to print, I get a message, "Printer is performing another operation", there are no jobs in queue; also the LCD display reads " Set ink cartridge". Please help!
 

A:Canon Printer Pixma MX340

6 more replies
Answer Match 66.78%

Have returned to my Canon Pixma Pro9000 printer after 2 months of non use over the winter. The printer flashes yellow and green and the rollers run when turned on for a moment. But it does nothing else. Will not move inks to remove position when lid opened. Installed new printer drivers but the printer is non responsive even when non connected to computer. Tried hard reset. Did not work. Turned off and on, checked paper paths and guide settings. Not sure what to do next. Thanks
 

More replies
Answer Match 66.78%

I have a canon MP560 pixma printer that I am not able to print using the canon black ink. The cartridges are new OEM Canon cartridges. The printer has been idle for 1 year and is essentially new. I did a couple of black only deep cleanings but still prints black in a blue tone. I had Canon customer service tell me it could be a malfunctioning print head. Is there a way to clean the print head using alcohol and will this possibly clean the head without damaging it? I have used this method on other printers. Does anyone have another suggestions.
Thanks
 

More replies
Answer Match 65.94%

I am very happy with my Canon Pixma MP750.
Actually I threw out a well functioning HP printer and have saved money. Based on a calculation that it is cheaper for me with the ink solution from Canon.

But now I get a printer error code on the PC ;" Service error 5700 " and on the printer it self it says error##356 and I also get a strange stacato sound when pressing "OK" . I haven't been able to find any explanation to the error code.

Please help me if you have an explanation or have an idea what ##356 mean.

With kind Regards Keld Winther
 

More replies
Answer Match 65.94%

I have just downloaded the MP navigator in order to scan from my Pixma MP160, which I have had for 3 years now, but have never used it for scanning. The icon appeared on my desktop, but when I press the scan button and I choose MP navigator as the program to use, it tells me that the driver is not installed. How is this possible? I downloaded it from the Canon site and I do not see any separate downloads for drivers...

Does anyone know what I should do?

Thanks

A:Canon Pixma MP160, scanning and MP drivers

Have you downloaded the drivers from this page?

Canon PIXMA MP160 Photo All In One Printer

Have you installed the actual printer driver? It's the first one listed on the screen shot.

1 more replies
Answer Match 65.94%

I had the black and colour ink cartridges refilled. The printer is now printing properly but there is a light flashing all the time (beside the letter c). There is a message coming up on the screen when I print telling me that the ink is low but they were just changed today. Why is this?
 

A:Canon PIXMA MP150 printer series

The cartridges are refilled so the printer does not realise that the cartridges still have ink in them. Try resetting the printer it should allow it should realise the cartridges have ink in it
 

1 more replies
Answer Match 65.94%

Can anyone tell me how to obtain replacement ink absorber pads, and replace the full one?

Canon help line VERY unhelpful! "We are not allowed to tell you how to replace the Ink Absorber pads - you will have to Google for an answer"

Reminds me of their slogan - with Canon you can('t)
 

More replies
Answer Match 65.94%

I just got my
Canon PIXMA MG6450 out the box that my new job bought for me. I've pulled the tabs out as directed, plugged it in, the orange triangle with a bolt in it light is on, and when I press 'on' it does nothing. All other forums on the Internet keep saying 'go into settings..' Etc but it's literally not turning on to do anything. No idea with technology and don't know what to do any help greatly appreciated!!
 

A:Unable to set up brand new Canon PIXMA MG6450

Canon PIXMA MG6450 Printer

------------------------------------------------------------------------
 

5 more replies
Answer Match 65.94%

The Sending Fax instructions show 5 steps to take:
1. Load document.
2. Press (FAX)
3. Adjust settings for document.
4. Dial recipients's number.
5. Press (Color) for color sending and Black) for black & white sending.

When I follow this procedure the screen on the printer says "Warming Up" and nothing happens. As far as settings go I leave them in Receive mode. Is that the problem?
 

More replies
Answer Match 65.94%

Hi there everyone!

I was fooling around in a computer shop and I saw this All-in-one, I absolutely fall in love and also with the price ($78 USD!!!) I just would like to know if this device is good, I worked with a canon printe before and no problems until it died (lasted for about 3 or 4 years of no rest) it is better to know the opinion of the experts related to this All-in-one.

Thanks in advance for your advices

See ya!!!

A:Is the Canon PIXMA MP250 a good choice?

Cannons are generally good printers. Though I've seen a couple of people on these forums having strange issues with them on x64 systems.
I don't know if it's isolated or a sign of a software problem on cannon's side though.

On a footnote I bought a hp printer not long ago just because of the cheap price.
The paper feed on it is enough to send you into fits though. It will feed paper through and say there is no paper, or my personal favorite it will say there is no paper in the tray constantly when it is in fact full. Cleaning and resetting have no effect on the problem.

5 more replies
Answer Match 65.94%

Greetings,
Can anyone tell me which resolution is best to print photos with this printer.
Every time I print a photo the person is either too tall or to large.
Thanks,
Leirum
 

A:Canon Pixma ip 1600 resulution printing

10 more replies
Answer Match 65.94%

The Cyan color on my printer is creating bands about 1/4" wide on both plain and photo paper. I have done repeated cleanings and alignments using tools in the software. Canon support will not answer my questions. How do I clean (I am assuming that is the problem) the nozzles/head of this kind of printer? It is 2 1/2 years old and I'd sure like to no have to buy a new one.
 

A:Banding on Canon Pixma ip3500 printer

13 more replies
Answer Match 65.94%

Hi,
looking for the appropriate driver for Windows 7. The add-on exe downloaded from Canon site doesn't fix anything ! could you please help me
Stargates

A:Driver Canon PIxma IP4000, windows 7

  
Quote: Originally Posted by Stargates


Hi,
looking for the appropriate driver for Windows 7. The add-on exe downloaded from Canon site doesn't fix anything ! could you please help me
Stargates


Try this : Easy-PhotoPrint EX for Windows

ZeshanA

3 more replies
Answer Match 65.94%

Hello Everyone
I am new here. Recently i have been trying to clean my canon pixma ip3000 printhead with some spirit based solutions, i already did it once last year and started printing again. It happened again this year only difference when i print something nothing comes out printed. the paper is still blank. Is it time for print head replacement or it may some other problem
Any help is appreciated. I have quite an affection for this printer.
many thanks
 

More replies