Tech Problem Aggregator

no sound through computer speakers when hdmi cable connected to tv

Q: no sound through computer speakers when hdmi cable connected to tv

I just installed a gigabyte hd4350 in my hp a1520n desktop bc it has an hdmi output. picture looks good, sound works, however when the hdmi cable is connected to the my samsung lcd tv, i get no sound through my computer speakers even when im not using the tv as a monitor or when the tv is turned off. i get sound through the tv though. when i unplug the hdmi cable from the tv, i get sound on the computer.

is there a fix for this? i have onboard sound enabled in the bios.

i have windows xp 32bit. in the sound and audio device properties, under the audio tab, default device, i see both realtek hd audio output and ati hd audio rear ouput when the hdmi cable is connected. when its not connected, just realtek hd audio is available.

i know i cannot have sound coming through the tv and computer speakers at the same time. is it possible for the sound to be switched back to the computer speakers when the tv is off WITHOUT having to unplug the hdmi cable that goes to the tv?

A: no sound through computer speakers when hdmi cable connected to tv

Weeell. Have you even tried setting the "Default audio playback device" (or whatever, in control panel->sounds->defaults tab to Realtek HD audio when the cable is plugged?

3 more replies
Answer Match 84.3%

Hi

I have connect my laptop using an HDMI cable to my TV. And from my tv I have connected my two HiFi speakers. When the TV is on an AV channel I have sound coming from the TV and HiFi speakers but when I switch it to the HDMI source channel, sound only comes from the TV and not HiFi speakers.

This is frustrating because I want to watch movies on my TV through my laptop and get the feel of some surround sound through the HiFi speakers but it is not working!!!!

Please Help!

Thanks

A:No sound to HiFi speakers when HDMI Cable Connected

The problem is not your PC but your TV and how it handles HDMI audio. There is nothing we can do for this, it is strictly an issue with your TV and how it routes audio internally (or to external devices).

2 more replies
Answer Match 103.74%

Previously, we could get the sound to work on our Bose speakers for our computer but no sound would come from the TV when we connected it to the PC with and HDMI cable. But now overnight, it's swapped; we can now get sound on the TV when we're using the HDMI cable but no sound is coming through on the speakers when we just want to watch/listen to thing on the PC. 
 
Any ideas are suggestions are REALLY appreciated.
Thanks in advance!! 
Pocsine

More replies
Answer Match 94.92%

I have the same issue in windows 10 home 64 bit-
HDMI monitor no speakers-no sound from anywhere when connected?



When I right click on the volume control, the options it shows are:
open volume control
playback devices
recording devices
sounds
volume control options

It does not give me a properties option.

Then I went to control panel and searched for sound. Then I saw the screen below. There was a Digital Audio as well and I clicked 'Don't use this device(disable)' on it by mistake and clicked OK.



Now, I only have Speakers option. How do I get the Digital Audio option back in here? I think that will solve my original problem.

Thanks

More replies
Answer Match 94.92%

I have an external monitor with no speakers I use as a dual display along with my laptop monitor. No sound comes out of my laptop speakers nor when I hook up external speakers to it while I have the external monitor hooked up by the HDMI cable. Is there anything I can do to get this to work?
Thanks,
Bill

A:HDMI monitor no speakers-no sound from anywhere when connected?

Right click on the volume control and then Properties,

When you connect the HDMI it becomes the default output device, even though it has no speakers.

You need to change this back to "Speakers" and set as default.

5 more replies
Answer Match 94.5%

Hello, I just bought an HDMI cable to connect from my HP Pavilion x360 onto my TV. Unfortunately, I only get video on my TV but no audio. The audio only comes from my Pavilion x360. I am aware of right clicking the volume icon and clicking on "playback devices" to set defult the HDMI cable or TV. Unfortunaly, this is not visible even after enabling the disconnected and disabled devices. Please, anyone help so I can get the audio on my TV as well? I've let a screenshot. As a reminder, my HDMI is connected on both sides, and I have both disconnected and disabled devices visible. Thank you!

More replies
Answer Match 94.5%

Hi.  Last week and prior mths HDMI connection worked, TV had sound.  This weekend, 8-20-16, TV sound went away but still had video.  Looked at forums, utube and did the control panel sound device manager.  the Digital Display Audio-AMD High Definition Audio Device; not plugged in is grayed out.  clicked on it to no avail.  the set default is also grayed out so i cant even set a default.  PC speakers do work.  bought a new HDMI cable but no change.  all the drivers are up to date.  not really sure what happened.  worked for months and now no sound.  any idea????

More replies
Answer Match 93.66%

As the title says, I've tried connecting my TV to my computer with an HDMI cable, and the video part works, but no sound plays. When I checked the list of playback devices, the TV appeared (as shown below), but it apparently cannot play sound.

I don't think I know anything beyond what I've posted, but if anyone could help me out with this, I would appreciate it.

Also, as a side note - I am completely unable to interact with any of these objects - I cannot set something as a default device; there is no response when I do it, and disabling the audio device only works until current sources of sound (like videos) are restarted.

A:LG TV not playing sound when connected via HDMI cable

If you highlight the LG TV you should​ be able to set it as default. If not, it sounds lik a permission issue (like non-admin account).

2 more replies
Answer Match 93.66%

I used to be able to connect my r11 to the TV and get sound.  For some reason, this has now stopped.  I have been through all the forums and tried various options to no avail. All help gratefully received.

More replies
Answer Match 93.24%

I've pluged a HDMI cable from my laptop into my TV and theres no sound coming from the TV just the laptop speakers. I've tried going into my control -> sound options -> playback -> and setting the HDMI output to default but still no luck, whats listed is :

Speakers
Realtek Digital Output (Optical)
Realtek HDMI Output
Digital Output device (HDMI)

and next to each one listed is like a sound meter, the only one thats active is the speakers at the top which im guessing is the laptop speakers.
 

A:No sound output from HDMI cable in my tv, only laptop speakers

6 more replies
Answer Match 88.2%

I recently found out that every time i plug in a HDMI or Auxiliary cable, my computer crash. I tried changing the cable to see if that was the problem and it wasn't. I just don't know where to look to start fixing the problem. I've considered that maybe the connector is faulty, but i'm looking for option before going to that.

I use HDMI to connect my TV for movies
I use the auxiliary Cable to connect a speaker.
on different occasion.

A:Computer crashes after HDMI/Aux cable is connected

Did you try shutting the computer down, plugging in the cable then starting back up? I've crashed a computer when plugging in a USB Thumb/Flash drive, turned out it was caused by static electricity that I'd built up walking across a carpeted room, now have anti-static touch pads on my desks to touch before anything else.

3 more replies
Answer Match 87.36%

I have an Acer Aspire laptop running Windows 7 Home Premium x64.

I regularly connect it to my TV monitor via HDMI cable and fall asleep watching movies (played on VLC or Windows Media Player).

I set the computer to go to sleep after 1 hour.

Multimedia Settings are set to "Allow computer to sleep" under "When Sharing Media" in the Power Management section.

Screensaver is disabled.

I have overrided my audio driver, since powercfg command suggested it may be a conflict.

If I am playing a movie without the HDMI cable plugged in, the computer goes into sleep mode right on schedule. It is only when I have the HDMI cable plugged into my TV monitor, that it refuses to enter sleep mode.

What could be causing this problem? Makes no sense to me.

A:Computer won't go into sleep mode when HDMI cable is connected.

anybody?

1 more replies
Answer Match 76.02%

Hi,

I've recently purchased a Samsung T23A750 monitor and to my disappointment when I try to watch a movie the built in speakers are not functioning. I have a Sony Vaio Z216GX connected via HDMI to the monitor (HDMI-DVI) port. I can definitely see the video, but no audio is playing from the speakers. The built in speakers are not at fault- I did a self-diagnosis of the monitor and the speakers seem to work fine. I also set the monitor as the default for the audio and even when Win 7 says its functioning properly, the speakers still don't work. Conversely, setting the default to my PC speakers work fine. I'm sure its not the HDMI cable- I used the same one to hook my pc to my tv with everything working fine. Any ideas??

A:Monitor Speakers not working when connected via HDMI to laptop

make sure you have the latest drivers for the hdmi can check by going to the windows start bar and right clicking on computer and choosing manage then click device manger and open the tab were it says sound,video and game controllers if you see somthing related to hdmi and has a yellow triangle then right click on it and update software if no yellow triangle is there try it anyways if that doesn't help then post here again, hopefully someone who knows more about hdmi can help also because i never had hdmi but ive had audio problems with my speakers before and this is how ive fixed it before

2 more replies
Answer Match 75.6%

Hey guys, I'm actually new here, so I am not sure if this is in the right forum page, but I need help. I have had a problem with my HDTV and laptop for a few months and finally decided to start a thread for help. The problem is that the HDTV is blurry and fuzzy when connected to my laptop via HDMI. However, I realize this is an overscanning issue, because in the AMD Catalyst Control Center, whenever I set the scaling for overscanning to 0%, the fuzzy text and screen is fixed, but the edges around the screen like the taskbar are cutoff the edge of the screen. I do not think my TV has an option for "Just Scan", but maybe you guys can find something I can't. Here is the manual:

http://www.sansuiproducts.com/images.../SLED2280D.pdf

Also, I am running Windows 8.1 with an AMD Radeon HD 7520G graphics card.

Any help is appreciated, thanks.

A:Need help with my laptop connected to my HDTV (HDMI Cable)

Not sure I can help but I have the same thing. I have a cheap TV and I think it has more to do with that. I play videos is all and not an issue there, just desktop is expanded past screen.

My TV is only 720p.

I'd love to see if someone has a fix.

5 more replies
Answer Match 75.6%

Hey guys. I have connected my PC to my HDTV (Sansui), and I cannot find an option in the TV for 1:1 Pixel Mapping. I need this because my TV is overscanning my laptops display and the taskbar and other images are cut off the screen. It is also quite blurry. I have the TV's manual here:

http://www.sansuiproducts.com/images/manuals/SLED2280D.pdf

I could not find an option in the manual, but maybe you guys could.

Many thanks.
 

A:Need help with my laptop connected to my HDTV (HDMI Cable)

6 more replies
Answer Match 75.6%

Hi! I have this monitor http://www.newegg.com/Product/Product.aspx?Item=N82E16824014146

and this cable

http://www.newegg.com/Product/Product.aspx?Item=N82E16812226013

Connected to a normal TV and HDMI to DVI cable to my lcd monitor at the same time it gave me an option at startup to switch to my HDMI source, but when I did all I saw was black on the LCD screen.

I was able to go into Display settings and switch it to HDMI manually but when it swaps to my lcd monitor its nothing but black again!

Do HDMI to DVI cables work for PS3s? My lcd monitor does not have a HDMI plug in. Only VGA and DVI

I'm hoping theres a trick to get this working or at the very least an adapter that wouldn't degrade the quality as much.
 

A:Playstation 3 and HDMI to DVI Cable connected to LCD Monitor

oh nvm my monitor dosent support high def outputs =\
 

2 more replies
Answer Match 75.6%

I know this is one that has been floating around the forums for a while but I have not been able to find anything that works in my situation. When I connect my laptop to my TV (Panasonic Viera Plasma) via an HDMI cable, I can get the video to show on the TV fine but there is no audio on the TV; it comes out of the laptop. I have tried everything I can think of including deleting the drivers then reinstalling them, updating them, rolling them back, etc., etc., etc. Here are the specs on my laptop:HP ENVY dv7 Notebook PCWindows 8.1 64-bit, 8GB RAMIntel(R) Core(TM) i5-3230M CPU @ 2.60GHzIntel(R) HD Graphics 4000Intel(R) Display Audio (with Beats Audio)IDT High Definition Audio CODEC Also, here is a snapshot of the Playback Devices:  As you can see, I have nothing which says "HDMI". I have gotten quite frustrated with not being able to get this to work. I would appreciate any help I can get. Thank you. Alex...

A:HP Envy dv7 - No Audio When Connected to TV by HDMI Cable; W...

Can someone please help...?

9 more replies
Answer Match 74.76%

I have a notebook..
Model : TOSHIBA Satellite L-510

and a TV
Model : SHARP LC32A37M (http://vlv.am/wp-content/uploads/pro...9192168124.jpg)

I have a HDMI cable and connected them both.. There are PICTURES.. but no sounds..

Please help.. Maybe if you think I need to install something additional please give me the sites.. Thanks...

My mom has been trying to fix this since last week..

A:Notebook connected to TV with HDMI cable doesn't work. Help pls!!~?

Have you checked the default audio device settings in your sound control panel?

3 more replies
Answer Match 74.76%

I have an HP Pavilion dv7-6050ea, and I've connected it to my Samsung UE32D6100 HD TV. Unfortunately, the colour looks awful, and I've tried my best to adjust it. I have tried playing with th settings of the TV, but I can't get it to where display well. I tried using the 'calibrate color' option in the display settings of Windows settings, and I found a configuration that works, though it's not perfect. The problem is, every time the screen saver comes on, the settings revert to default.

Any ideas?

A:[SOLVED] Dodgy colour when connected to TV via HDMI cable

whats the resolution of the laptop ?

16 more replies
Answer Match 74.76%

Issue:

Windows 10 plays Mp3 Files just fine. Connect an HDMI cable to the video output port, and then windows 10 suddenly wont play those files. An error message pops us inside windows media player and Grove that this file type is not supported. Also no sound is played through the HDMI Cable to my TV, and no sound is played when i click the volume bar on the bottom right side.

More detail:

I work for an integration company. We just installed a couple of conference rooms for a company in which we have an HDMI cable running from the table through the floor in the walls and to the TV. From there it breaks out into the Amplifier and plays audio in the room. Normally i bring my Mac book pro for testing but i purchased this Windows 10 computer as a test device. I did not have a second laptop with me to test this out.

However, With the computer and the HDMI cable i am getting video to the TV. When i enter my TV menu and arrow around the menu option my sound works on the built in speakers in the room. So i can confirm that the cabling is all correct. This is the identical setup that we always use. I have also plugged my Iphone into the cabling behind the TV and played music which worked perfectly fine.

The computer, as i mentioned, would play MP3 files perfectly fine, untill i plugged in the HDMI cable. Infact i can be playing and MP3 file and then plug in the hdmi cable and suddenly the computer stops playing the MP3 file and gives me the error that windows c... Read more

A:Windows 10 wont play MP3 if there is an HDMI cable connected

Hi, welcome to tenforums. There are other threads on this forum with similar symptoms. Just search 'hdmi'

This may point you in the right direction:
Solved No audio after upgrade from 8.1 to 10 using HDMI cable - Windows 10 Forums

Please have a look at the others if that doesn't help and post back if not resolved. Good luck!

2 more replies
Answer Match 73.92%

Hello,

My laptop's screen goes black when I connect it to the TV via a HDMI cable, however this is completely new as it used to work fine. I can still watch things on my TV but I have to look at the TV screen where text comes up quite small and it makes it hard to do stuff, so I was wondering if anyone would know why my laptop's decided to start doing this, and how I can get it back to both screens working at once? The volume and everything else works ok, it's just a bit annoying is all!

I have Windows Vista Home Edition, not sure of the details, but I got it just when Vista first came out.

Thanks!

A:Help needed: Laptop screen goes black when HDMI cable is connected

do you have your drivers set to "clone mode" in your CP? (the bit where you set up multiple displays

4 more replies
Answer Match 73.92%

Tv: Panasonic Viera E6 PC: Asus K55VM with Win8
Basically the tv cuts the corners. Can anyone help me?
Screenshot by Lightshot
Can anyone help me?
Thanks in advance

A:Tv connected by hdmi cable to pc doesnt display the entire screen

Hi and Welcome to TSF!

Is Windows set to the correct resolution?

Are your video drivers up-to-date?

2 more replies
Answer Match 73.92%

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3764 Mb
Graphics Card: Intel(R) HD Graphics, 1754 Mb
Hard Drives: C: Total - 463838 MB, Free - 265342 MB;
Motherboard: Gateway , ID59C , V1.05 , LXWLJ02009023BBCC42200
Antivirus: Bell Aliant Security Services Anti-Virus, Updated and Enabled

Okay, so over the holidays I received a brand new Hisense television and I was watching movies and tv shows on my laptop on the big screen through an HDMI cable for a few weeks. Before that I was doing the same thing with the big screen in our living room for months. I got up one day and wanted to plug it in but I kept getting a message saying no signal. I had had it plugged in the night before and it worked just fine. Yes, I checked to make sure it was on the right setting, HDMI 1. I also tried plugging it in the other HDMI slots on the tv and it didn't work in those either. It is doing the same thing to our tv in the living room and it just doesn't make any sense. The only thing I can think of is that my computer has some kind of driver that just needs to be updated or something but I have no idea which one. HELP PLEASE!
 

A:No signal message when laptop is connected to Hisense TV through HDMI cable!

7 more replies
Answer Match 73.08%

Hi,

Whenever I connect my laptop to the TV via hdmi cable my desktop icons are moved and auto aligned in vertical columns down the left hand side of the page (my desktop). I have to drag them back to where I want each time. It's a fairly minor nuisance, but is there any way to avoid this, I've searched but can't find a definitive answer.

(I've tried, right clicking and unchecking 'align icons to grid' but that doesn't make any difference, it still always happens)

Thanks

A:Desktop Icons Auto Align Left When Hdmi Cable Connected

Originally Posted by ouroboros72


Hi,

Whenever I connect my laptop to the TV via hdmi cable my desktop icons are moved and auto aligned in vertical columns down the left hand side of the page (my desktop). I have to drag them back to where I want each time. It's a fairly minor nuisance, but is there any way to avoid this, I've searched but can't find a definitive answer.

(I've tried, right clicking and unchecking 'align icons to grid' but that doesn't make any difference, it still always happens)

Thanks



I believe this is an issue with the change in resolution that is likely occurring when you connect the HDMI cable. If you can set the HDMI output to the same as the screen, then the icons should stay where you left them.
I had the same issue with icon location changes when another user signed into the PC and then signed in. My icons rearranged. After a lot of trial and error I found that if I set the resolution, scaling, etc. options in both profiles to the default values, the issue vanished. I don't think Windows 10 knows how to deal with resolution changes and desktop icon locations very well, although I vaguely recall experiencing this issue with prior Windows versions. I could not remember how I solved it then, but the resolution/scaling/etc. work around is acceptable.

0 more replies
Answer Match 72.66%

Yesterday I installed a new external hard drive - following the installation - my sound no longer played through my television (video is fine, HDMI connection) and sound now comes ONLY through the laptop speakers.

The option for HDMI Audio doesn't appear in the 'sound' menus. I have 'checked' "shoe disabled" and "show disconnected" in those menus.
Basic Specs:

DV7-4060us

Windows 7/64bit

IDT High Definition Audio Codec

ATI Mobility Radeon HD 4250
AMD M880G with ATI Mobility Radeon 4250

I have tried the following fixes gleaned from other forum posts on similar forum posts:

Uninstalling and reinstalling IDT drivers - didn't work.

HP driver 'recovery manager' to install 'original' IDT audio codecs - didn't work.

Unistalled ATI Video Drivers , and reinstalled them - didn't work

System Restore to a week ago - didn't work.

I use my HD TV as my primary monitor for gaming, so having sound through laptop speakers and not TV is quite annoying.

Perhaps my only solution is another sound card?

A:no sound through tv via hdmi, sound plays through laptop speakers (idt

So you're trying to get audio to play on your TV from your laptop? Since you said the video is fine it's obviously not the video drivers. It sounds like the sound output is configured wrong. I don't think it would be labeled as HDMI. HDMI is just DVI with HD Audio. Try altering your sound settings to see what you can get.

Audio is a very difficult thing to diagnose and fix.

6 more replies
Answer Match 72.66%

So I've got a problem,I changed my case 2 days ago and everything went great,all working as it should be.Up until an hour ago,when the lid got stuck in one of the little clips so after a quick bang it went in.But then I lost my picture on both monitors.
So I went to investigate,I ended up moving the GPU over to the other 16x slot and it is now fine.
but since then I've lost all sound through either the front or rear jacks,It is saying that the speakers are not connected.I've done all the usual checks,as in default devises,drivers.Everything I can think of I have done.I have tried a new cable,and tested through both of my phones and the speakers work fine.I've also tried a few sets of headphones in both jacks.There is a faint hiss sound when I turn the speakers on,that has just started.
I have managed to get sound through my tv via HDMI,but every time,I go into audio manager and lets say change from soft to hard,I loose the sound again,and have to set the HDMI as default again.this too has just started.
I'm using the on board realtek audio sound card ,on an Asus p8z77-lx motherboard.
Just a quick note when I plug in the jack,there is no beep and the pop up screen does not appear as normal.
To me it is pointing towards a motherboard problem,with the 2 problems happening together.Any help would be great.

A:No sound through speakers.Jack not being detected.HDMI sound only?

Hiyya Paul mate sounds like (no pun intended) that thump dislodged something on the board just carefully move the I/O output block and see if there is any movement, could be something a simple as dry joint but which is going to be hard to find and fix.

If you have some warranty and I know it is a PITA having to reef it all out again but.....

Personally I have the P8Z77-V and I just stuck an Asus Xonar DG card in the thing and there is no comparison really and you get one heck of a control centre. Not expensive I don't know about where you are but out here $35 so both my Ivy and Sandy Bridges have them.

8 more replies
Answer Match 70.98%

Hi guys!

I've been struggling with this problem since I got my computer, a little over a year ago.

I've tried everything, but can't figure out how to get sounds from my pc speakers and HDMI at the same time. It's really annoying having to change the primary output multiple times a day (I watch a lot of movies using HDMI-cable to my tv). Might sound like a little problem to you, but I'm becoming obsessed with this

My soundcard is some kind of a Realtek HD -thingy, if that helps.

Any advice would be appreciated

A:Sound from HDMI and pc speakers at the same time

That is the way it works. You can only have one "default playback device" - either your Speakers (PC sound) or the HDMI.

I've seen other posts about this, but don't recall seeing any way around this.

4 more replies
Answer Match 70.98%

Hello guys, I bought a new monitor from LG and connected it via HDMI to my laptop but the sound does not work on the speakers of my monitor could you help me please???

A:No Sound via HDMI on monitor speakers??!!!!?!!

Set it as Default Device, and Disable the Intel device. Then restart.

5 more replies
Answer Match 70.14%

Hi,

I'm trying to connect my laptop to my tv using a HDMI cable. I can get a picture but no sound. I realise this is a common problem but I have tried everything and nothing has worked so far.

It would be a huge help if someone could help me fix this.

I have tried setting the HDMI output as default. When I do this and play a dvd I can see the green bar move up and down but still no audio.

A:No sound with hdmi cable

Try this page: No Audio from HDMI output - Microsoft Answers

1 more replies
Answer Match 70.14%

my hp pavilion a6752f is having some problems. So I have a set of speakers hooked up 2 my computer, which I usually use but sometimes I like to use my monitor speakers which are run with a hdmi cable and sometimes use my lcd tv to watch movies. Anyways When I go to the realtek audio manager I select the hdmi as my default device which activates it. It says it's working but I have no sound. I have picture but no sound. future shop replaced my graphics card due to some loud fan noise and now this hdmi sound option doesnt work? Could that be the problem? What am I doing wrong? please help!!
 

A:No Sound through HDMI cable??

i found this article on hp http://h10025.www1.hp.com/ewfrf/wc/...48&lc=en&dlc=en&cc=us&lang=en&product=3872434 was your graphics card replaced under warranty or with the same type card?
 

2 more replies
Answer Match 70.14%

New n mad i am. like the topic say's up top. i'm having a hard time getting this Sony [yes i know. sony n microsoft don't mix >.> but...] HDMI cable to work. first i plug both ends in. a windows comes up asking to setup display. i put n mirror. propblem. at first this was cool. everything work. but when i played Combat arms i said wait. no sound??? i tried everything from my T.v settings to my laptop. nothing seems to work. i tried going to sound and and set HDMI as default but that only get me no sound from laptop nor tv. I just want sound from my tv. not laptop, not both. i also seen a topic here about this but that didn't seem to help. what i got is this...

Sony high speed hdmi audio/video cable
idea 4 hdtv,ps3,dvd.blue ray,hd cable n satellite box

don't know what my tv is but its got 2 hdmi port 4 hd inputs a game mode n it's an dvd player.

now 4 my laptop.

AMD turion X2 RM-72 Dualcorl mobile process
windows home vista home premium 64bit service pack 1
4096MB DDR2 system memory
250GB(5400rpm)
webcam
ati radeon HD3200 graphics

theirs more but i think that all u really need i guess

HP Pavilion
Entertainment Notebook PC please help

A:No sound from TV with HDMI cable

Originally Posted by Zerow


New n mad i am. like the topic say's up top. i'm having a hard time getting this Sony [yes i know. sony n microsoft don't mix >.> but...] HDMI cable to work. first i plug both ends in. a windows comes up asking to setup display. i put n mirror. propblem. at first this was cool. everything work. but when i played Combat arms i said wait. no sound??? i tried everything from my T.v settings to my laptop. nothing seems to work. i tried going to sound and and set HDMI as default but that only get me no sound from laptop nor tv. I just want sound from my tv. not laptop, not both. i also seen a topic here about this but that didn't seem to help. what i got is this...

Sony high speed hdmi audio/video cable
idea 4 hdtv,ps3,dvd.blue ray,hd cable n satellite box

don't know what my tv is but its got 2 hdmi port 4 hd inputs a game mode n it's an dvd player.

now 4 my laptop.

AMD turion X2 RM-72 Dualcorl mobile process
windows home vista home premium 64bit service pack 1
4096MB DDR2 system memory
250GB(5400rpm)
webcam
ati radeon HD3200 graphics

theirs more but i think that all u really need i guess

HP Pavilion
Entertainment Notebook PC please help



I had the same problem and I have a HP laptop, but I found out that you have to make sure you are getting a good connection.

11 more replies
Answer Match 70.14%

I have a TV with HDMI and when possessed Vista both the sound and image were transmitted by cable, put the 7 and only the image is transmitted on television, the sound driver is installed and supports HDMI transmission is the same as used in Vista. How can you fix the problem?

I did not know where to post, sorry if posted in the wrong place

A:No sound through the HDMI cable

Problem solved, for sony vaio users using Vista drivers because sony says that your nootebok not support the 7, u only need to is uninstall the driver and restart the computer using the default driver on Windows 7

1 more replies
Answer Match 70.14%

Problem: AMD HDMI output would not play sound via HDMI cable to monitor speakers.

Testing the AMD HDMI sound output gave the following error message:

Device in use by another application?

This FIX worked for this hardware configuration.

? MSI motherboard
? Realtek Audio onboard (built into motherboard)
? AMD Video board installed withHDMI cable to monitor
? See how the Device Manager sound devices should look when correctly configured below.

Issue(s):

1. The Realtek HDMI Drivers had been assigned to the AMD HDMI card under Device Manager, Sound, Video and Game Controllers.

2. There are multiple hardware devices/drivers that are conflicting.

Actions Required:

1. There are 2 instances of the AMD HDMI card that should be shown under Device Manager.

2. You must uninstall the Realtek hardware and drivers so that only the AMD HDMI device is showing.

3. The AMD HDMI and Microsoft device drivers must be assigned to the AMD hardware.

How to fix:
1. Under the Device Manager sub-heading ?Audio inputs and outputs?
? AMD HDMI Output (High definition Audio device)
? Right click and select Properties, Driver, should show driver provided by: Microsoft

2. Under the heading ?Sound, Video and Game Controllers?
? AMD High definition audio device
? Right click on the device to display the menu window
? Select Properties, Driver tab
? Driver Provider should say: Advanced Micro Devices
If t... Read more

A:FIX - AMD HDMI no sound output to monitor speakers

Originally Posted by laserlight


Problem: AMD HDMI output would not play sound via HDMI cable to monitor speakers.

Testing the AMD HDMI sound output gave the following error message:

Device in use by another application?

This FIX worked for this hardware configuration.

? MSI motherboard
? Realtek Audio onboard (built into motherboard)
? AMD Video board installed withHDMI cable to monitor
? See how the Device Manager sound devices should look when correctly configured below.

Issue(s):

1. The Realtek HDMI Drivers had been assigned to the AMD HDMI card under Device Manager, Sound, Video and Game Controllers.

2. There are multiple hardware devices/drivers that are conflicting.

Actions Required:

1. There are 2 instances of the AMD HDMI card that should be shown under Device Manager.

2. You must uninstall the Realtek hardware and drivers so that only the AMD HDMI device is showing.

3. The AMD HDMI and Microsoft device drivers must be assigned to the AMD hardware.

How to fix:
1. Under the Device Manager sub-heading ?Audio inputs and outputs?
? AMD HDMI Output (High definition Audio device)
? Right click and select Properties, Driver, should show driver provided by: Microsoft

2. Under the heading ?Sound, Video and Game Controllers?
? AMD High definition audio device
? Right click on the device to display the menu window
? Select Properties, Driver tab
? Driver Provider should say: Advanced Micro Devices
If the driver provider is wrong you will need to... Read more

2 more replies
Answer Match 70.14%

I'm having some trouble with my laptop's sound. Every few minutes, it sounds like the audio skips and buzzes for less than a second. It sounds like interference or something. I was certain it was a fault with the speakers, but the problem exists when listening on headphones and even on the TV connected through HDMI. Also, it happens in Windows Media Player, Adobe Flash, or anything that has audio. Is there a way to fix this? Thanks.

A:Sound Buzzing in Speakers/Headphones/HDMI

I'm still not having any luck. After doing some tests, I determined that the mouse and keyboard are affected too. Every 30 seconds, on the second, everything stutters for less than a second. In addition to the audio problems described, the keyboard stops taking input and the mouse automatically clicks a link if the cursor is hovered over it. Any ideas on what's going on?

2 more replies
Answer Match 70.14%

Hi folks, so I got a new pc and connected it to my LG 42LV550T using a DVI to HDMI and 3.5mm from line out (and tried headphone socket) to the 3.5mm audio in (RGB/DVI) socket on the TV but I don't get any sound on the TV.
I connected the PC to my stereo using the line out and headphones socket with 3.5mm to stereo/phono plugs and I get sound, but I would like the sound through the TV and then the TV connected to my stereo for better sound all round.

I know DVI doesn't carry sound.

I had a chat on LG support with no help

Any ideas ?

PC specs.
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 8082 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 953516 MB, Free - 897064 MB;
Motherboard: Gigabyte Technology Co., Ltd., H61MA-D3V
Antivirus: Windows Defender, Disabled

Thanks TechnicalH1
 

A:DVI to HDMI and 3.5mm audio connected but no sound

16 more replies
Answer Match 70.14%

Hi, I was wondering if someone can help me.

I updated to windows 10 some months ago and realized my beats audio panel was gone. I few day back I re installed the High Definition Audio Device drivers and beats audio seems to came back.

I recently bought a denon amplifier and noticed very low sound when I connect the notebook to the amplifier through hdmi.
Is the hdmi sending the wrong signal? are there any new drivers for hdmi controllers or realtek sound card?
My laptop is a HP envy 17 j011nr (i think so) core i5 beats audio
Thanks a lot in advance!!!

A:Low sound when connected to amplifier through hdmi

Realtek shouldn't even be involved with the HDMI sound. I suggest to update your laptop's drivers and use "Intel Display Audio" as your HDMI driver. Set the volume to max then you're good to go.

2 more replies
Answer Match 70.14%

Hi everyone, I just got a new sound bar (Yamaha YAS-105) which only supports Dolby Digital 5.1 (AC3, I think) and I want it to smoothly transcode all of my DTS or newer audio to a multi stream AC3 in both MPC player from the latest K-lite mega pack, VLC and Winamp, or rather, if possible, just in general. If I play something thats DD5.1 in K-Lite's MPC it neatly picks up the audio and displays it as DD on my sound bar, same thing goes for DD5.1 in VLC etc. but as soon as I play something in DTS or higher there is no audio. I've been googling and tweaking the settings already and after messing around a bit it does play sound through MPC but none of my Dolby lights light up on my device and it doesn't sound like 5.1 either, the weird thing is that no lights go on, not even the PCM light just the TV light is connected and it gives a sort of stereo with subwoover sound (so 2.1). If anyone can help me out I'd be very grateful, I know it's possible because it works with media boxes as well, I just can't get it to work on windows... Any extra info, I have an Alienware X51 RC1, Soundbar is a Yamaha YAS-105, like I said it's hooked up via HDMI to my TV and my TV through a Digital optical cable to my soundbar.

More replies
Answer Match 70.14%

I get no sound when I connect my hdmi monitor my laptop

My monitor has no sound

How do I keep the sound on my laptop?

Thanks
OM
 

A:No sound when hdmi monitor connected

Try clicking the speaker icon in the lower right corner of your monitor, click playback devices, your monitor should be listed there and you need to set it as default.
 

3 more replies
Answer Match 70.14%

Hi, I was wondering if someone can help me. I updated to windows 10 some months ago and realized my beats audio panel was gone. I few day back I re installed the High Definition Audio Device drivers and beats audio seems to came back. I recently bought a denon amplifier and noticed very low sound when I connect the notebook to the amplifier through hdmi.Is the hdmi sending the wrong signal? are there any new drivers for hdmi controllers or realtek sound card? Thanks a lot in advance!!!

More replies
Answer Match 70.14%

Decided to run this old laptop to my TV so that I could watch shows from online. When I connected using an HDMI cable the sound cuts in and out very bad. Thought the cable might be bad so I switched it out for a new high dollar cable but still has the same problem. Issue occurs both streaming and when testing using system sounds (such as "test" in the sound setup in device manager). Running Windows 10 (64-bit) and have installed all system updates and have tried updating the audio driver but it is saying I have the most up to date driver. Any help would be greatly appreciated.

More replies
Answer Match 69.72%

Same problem like some users: using Win10 and despite the video is passing to the TV through HDMI cable I can only get the sound in the PC, not in the TV. Boring...  It says its not plugged in

A:Sound not coming on the TV through HDMI cable

@porrinho? Try running this. http://ftp.hp.com/pub/softpaq/sp72001-72500/sp72370.exe REO

1 more replies
Answer Match 69.72%

hi,

i have an acer aspire revo nettop pc, running winxp sp3
i have great graphics but no audio using an HDMI cable

i feel the monitor (vizio tv) is configured properly, as it works
great (audio and video) with a laptop running win 7

any help? thanks in advance,

sidecar

More replies
Answer Match 69.72%

Same problem like some users: using Win10 and despite the video is passing to the TV through HDMI cable I can only get the sound in the PC, not in the TV. Boring...  It says its not plugged in

More replies
Answer Match 69.72%

When I hook my hdmi cable into my laptop and into my tv the sound come through the laptop instead of the tv. I had sound the first few times and now nothing. When I go under sound hdmi doesnt show up. Please help.

A:No sound to tv when HDMI cable hooked up.

<script src="https://apis.google.com/_/scs/abc-static/_/js/k=gapi.gapi.en.T4EayPRcrOA.O/m=gapi_iframes,googleapis... async=""></script> <script src="//www.google-analytics.com/analytics.js" async=""></script> <script>// JS_ERR_COUNT = 0;JS_ERR_ARR = [];JS_LOADED = false;function _gtErr(e,url,line){if (++JS_ERR_COUNT > 10) {return;}var i=new Image();var err='e='+e.substr(0,1500)+',url='+url.substr(0,400)+',line='+line+',count='+JS_ERR_COUNT;JS_ERR_ARR.push(err);i.src='/gen204?jserr='+encodeURIComponent(err);i.onload=function(){i.onload=null;};}window.onerror=_gtErr; // </script> <script>// (function(){var b=window,f="chrome";(function(){function g(a){this.t={};this.tick=function(a,d,c){this.t[a]=[void 0!=c?cSmiley Sadnew Date).getTime(),d];if(void 0==c)try{b.console.timeStamp("CSI/"+a)}catch(e){}};this.tick("start",null,a)}var a;b.performance&&(a=b.performance.timing);var h=a?new g(a.responseStart):new g;b.jstiming={Timer:g,load:h};if(a){var d=a.navigationStart,e=a.responseStart;0<d&&e>=d&&(b.jstiming.srt=e-d)}if(a){var c=b.jstiming.load;0<d&&e>=d&&(c.tick("_wtsrt",void 0,d),c.tick("wtsrt_","_wtsrt",e),c.tick("tbsd_","wtsrt_"))}try{a= null,b[f]&&b[f].csi&&(a=Math.floor(b[f].csi().pageT),c&&a... Read more

2 more replies
Answer Match 69.3%

I've just received my Laptop back from repair and all seems to be well, I had my screen panel replaced, gpu replaced(from 570m to 670m), new hard drive and CPU fan. However the problem I seem to be having is that internal speakers are completely not working.

I can see that bolume bar in for my internal speakers is actually changing but there is no sound. My system is not muted (unless there's some secret button I'm missing out on) No matter what i try it seems that sound will not work through my internal speakers, I've plugged in my Razer headset(Kraken) that works with my other computer but is not even detected when plugged in the Audio jacks of my laptop(Doesnt even pick up the microphone) and this did work before I sent it out for repair. Sound only works through HDMI output into a TV/Monitor.

Now I'm not sure if this some software configuration that I have to do or something physical with the hardware but I would prefer to not have to send it back as it would take a month to get back to me and also the repair company states that if the problem is due to software then they will charge.

I assume it's a conflict that Realtek HD audio manager is having or something but none of my devices show up on the RealtekHD Audio Manager nor do I get a pop up when a device is detected(which is what normally would of happened)

System:
MSI GT780DX
I5 2430
GTX 670m
Win 7 64 bit
8gb Ram

Edit: After some more looking around, I really do believe that what I had thought earlier was causi... Read more

A:Sound works through HDMI output but not internal speakers.

What is set as default in the Output Devices?

Right click the volume control, select output devices, set realtek audio (or speakers) as default.

Repeat for input devices to get the mic working

9 more replies
Answer Match 69.3%

Hi everyone,

Here is the issue I'm having. I have an Asus K61-IC dual booting Windows 7 Professional x64 (default) & Fedora 16 x64. In Windows, whenever I plug in a HDMI cable to watch a movie on my LCD TV audio will only come out of laptop speakers and when I open audio properties it says HDMI audio not connected or something to that effect (at the moment, I'm not able to connect it to the TV) and it will not let me click on properties, but when I open the driver properties, it tells me everything is working fine. I cannot figure this out for s#%t. Thanks for any help that yall can provide.

Thank You,
C. Davis 504

A:Asus K61-IC Sound coming from speakers when HDMI is plugged in

The problem is usually with the video as it controls the HDMI audio. If its not detecting or properly detecting the HDMI cable connection then you can have the problem you have.

Reinstall the Video drivers (or install the latest driver for the video) and see if that helps.

2 more replies
Answer Match 69.3%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, Intel64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 8191 Mb
Graphics Card: Windows Live Display Driver, 4 Mb
Hard Drives: C: Total - 953866 MB, Free - 649070 MB; I: Total - 476936 MB, Free - 358954 MB;
Motherboard: Gateway, FMCP7AM
Antivirus: AVG Anti-Virus Free Edition 2012, Updated and Enabled
 

A:no sound from hp monitor w/speakers & HDMI, model w2207h

Here, give this a look. Troubleshooting Sound Problems with Monitor Speakers
 

1 more replies
Answer Match 69.3%

I have connected my HP Laptop with Windows 8 to my TV through an HDMI port. I watch netflix and youtube. A couple times a day the sound will just quit working. I check the audio and it says it is still hooked up to the TV. The only way I can figure out how to get it working again is to restart the computer. This has never happened while audio was playing, just when it is not in use for a little while.

Any help would be appreciated.

Thanks!

Luke
 

A:Laptop connected to TV through HDMI Sound turns off every now and then

HP has tens of thousands of different laptops. Which exact one do you have? The full model number will be on a sticker on the bottom and will be similar to DV9240ca or DV6-2130us.
 

3 more replies
Answer Match 69.3%

www.sevenforums.com/sound-audio/228558-hdmi-sound-output-problems-2.html

Dear Experts

I am using windows 7 64 bit on my desktop (motherboard ASUS P5E)
ASUS - Motherboards- ASUS P5E

And I installed VGA SAPPHIRE HD 3870 (ATI RADEON Technology) 512 MB.
This VGA has a converter plug from DVI to HDMI.

Connected a 3 m HDMI cable from a converter to the Samsung TV.

I can see a picture on the TV but no sound

What I did for troubleshooting

1- download latest driver from AMD website from the link below :
AMD Catalyst
2- Follow the instructions here :
How to Set Up Audio on an ATI Radeon HD | eHow.com

No audio from HDTV when playing audio / video from a computer system

3- Digital Audio (HDMI) option was grayed out (not clickable) as can be seen in the snapshot below :

http://i46.tinypic.com/2d10aba.jpg

A:SAPPHIRE HD 3879 connected to TV via HDMI no sound

What is a Sapphire HD 3879? I can't find that model. I see a Sapphire HD 3870, is that what you mean?

Regardless, you aren't getting audio because DVI doesn't carry audio, so converting from DVI to HDMI won't give you audio.

8 more replies
Answer Match 68.88%

HP Pro Book 450 G2Windows 7 Professional 64 bitIntel i7 5500U 2.4 GHz8 GB RAM Issue:  no sound from the built in speakers or when connected to external speakers from 3.5 mm stereo output jack.  I have tried several audio sources ? Windows Media Player, VLC, WInamp, Youtube, etc.  All volume levels at max and nothing is muted.  The level meter indicates that sound is being produced, but there is no sound emanating from the speakers. This issue started just a few days ago, and until then I had sound. I have tried: Control Panel > Hardware and Sound > Manage Audio Devices > (right click)Configure Speakers > TestTest (level meter indicates sound)Disabling/ re-enable> Properties > Advanced > Test> Sounds Tab > (Asterisk) > TestDevice Manager (General Tab > Device Status: ?This device is working properly.?)Disabling/ re-enableUpdating the driverRolling back the driverWindows Fixit utility ? ?Did not detect any problems??System Restore (error ? did not complete properly for some reason)

A:no sound from the built in speakers or when connected to ext...

Hello William-0 Welcome at the HP forums. Maybe windows 7 updated the audio driver and something went wrong. You might want to try to reinstall the driver: (It's also the fastest way to reset everything to default) http://ftp.hp.com/pub/softpaq/sp69501-70000/sp69844.exe Just let me know if it works. Winos




The doors of wisdom are never shut. Benjamin Franklin&We must use time wisely and forever realize that the time is always ripe to do right. Nelson Mandela

1 more replies
Answer Match 68.88%

Hello, I have a problem, since i've had a virus on my notebook, i had to re-install windows 10. Everything is working again except when i plug in my hdmi cable it does not recognize the hdmi as a sound output. If i look at my sound devices it says: digital audio (HDMI) not connected. I've tried updating/re-installing my videocard drivers/audiodrivers/ everything i cound think of, but nothing is working. Before the re-install everything worked fine, so i think its a software problem, i just don't know what it is. Can somebody help me out? Evan

A:Hp probook 6450b no sound via hdmi cable

Hi, Evan: Does your notebook have the Intel HD graphics? If so, In the device manager, under the sound, video and game controllers device manager category, do you see two High Definition audio devices listed--one IDT HD audio and one Intel HD audio? Or do you see one IDT HD audio and one generic HD audio device listed.

3 more replies
Answer Match 68.88%

I have Tosiba satellite C55-B1063, Part number PSKT6V, serial number xxxxxxx, I have good picture with no sound when I connect HDMI cable, please help what is the driver name to down load from drivers download

More replies
Answer Match 68.88%

My friend has a computer that I helped build. I was testing to see if using a DVI cable would increase his graphics. It is DVI to HDMI and a message appeared that said sound was no going to go through the DVI.

Well, we switched back to VGA and he has no sound. Is there an option to set it back to not using HDMI for sound?

Thanks in advance

A:Sound didnt return after using DVI-to-HDMI cable

If you haven't start with checking the Windows Sounds playback settings, and make sure the sound card is set as the default device.

3 more replies
Answer Match 68.88%

Hey guys,
Just picked up a used slimline PC and installed XP. I wanted to use it lile a little media box, so I installed a heigh height Nvidia 9300se from another PC into this one...the card has HDMI out. Looks great on the plasma, but I get no sound.

When I look at the board, there is a little 3 pin connector and the same 3 pin connector can be seen on the video card. I'm guessing I need a 3 pin to 3 pin cable? Right on the board it says "SPDIF_OUT2" and on the card it says input.

Here is a pic of the board, same connector is on the video card:

Am I on the right path to getting audio over my HDMI connection? Where do I get such a cable? I googled but the cables I saw look like 2 pin connectors.

Thanks for your help!
 

More replies
Answer Match 68.88%

? just changed my video card. I could take sound from my ex-card with hdmi cable to my lcd tv. But with this new card i cant. How can i fix this. My new video card is "palit geforce 9600 super+ 1gb". And i plug yo audio cable from my motherboard to video card.
 

A:I have GeForce 9600 GT 1GB but i cant take sound with HDMI cable

Right next the SLI connector on the card you should see a small white 2 pin socket.
With the card you should also have a small cable (S/PDIF) with the corresponding white plug at one end. That fits into the white socket and the other end which has two single black pins attaches to the S/PDIF out header on your motherboard.
Once this connected up you will have sound over HDMI.

On this page http://tech.icrontic.com/articles//palit-9600gt-hd3850/2/ , the cable is shown (along with the other accessories) in picture 2 -the thin cable on the left.
 

1 more replies
Answer Match 68.88%

When i plug my hdmi cable into my laptop to my tv and i set digital output device HDMI as my default so that I can hear the sound from my computer... but when i unplug my hdmi cable and set my speakers as the default my sound wont work unless i restart my laptop.

How can I fix this problem its driving me crazy

Also do I have to always change my default sound when i plug in my hdmi cable its rather annoying

More replies
Answer Match 68.88%

Hi

I have a toshiba satellite p300 laptop and have purchased an hdmi cable hooked it up to samsung tv, i have a picture just no sound. Do you have to download some drivers to get sound, or something else???

Thanks
 

A:HDMI cable hooked to tv, have picture, no sound..

7 more replies
Answer Match 68.88%

I recently tried hooking my HP G60 laptop up to my 50in Element plasma tv using a VGA cable to take movies that I have downloaded on my laptop and watch them on the tv to sort of do away with having to burn the movies onto a DVD. I had no luck with the VGA cable as I got no picture what so ever on the tv. So I went out and purchased a HDMI cable after do much research on the internet on what was the best option to hook your computer up to your High Def tv and found that using an HDMI cable was a great option as you can achieve video and sound from one cable (or so I had thought).

I hooked the cable into the HDMI slot 1 on the back of my plasma and into the HDMI port on my laptop. I can get perfect picture, but I have yet to achieve any sound coming out of the tv, I was of course able to get sound out of the laptop speakers but when I did some searches online of ways to get the sound to transfer over to the tv speakers, everything that I tried left me still with no sound. I have did endless searches with basically almost every search that I do or forum that I read on giving a different answer or way to go about it, and I am basically stuck about to give up and need some guidance or insight or something.

I'm not fabulous or a genius on computers but I am pretty decent at them so I will do my best to answer anything that I may need to. Just please be gentle

Thanks in advance!!

Shannon

A:Laptop to Plasma using HDMI cable...But I can't get sound?!?

I have read several places that I may need to update my drive....But I am not very sure as what drive I need to update and I am willing to give it a try so if anyone can also help with this it would be awesome.

27 more replies
Answer Match 68.88%

i have Asus X450JF with windows 8.1 pro 64bit. everytime i turn on the laptop, and i plug the HDMI cable, there is no sound on my TV even in the playback devices. i unplug and replug the cable then the sound appeared on my TV. i already tried many drivers (from intel and the asus manufactured drivers) but i still to plug twice the cable to get the sound on my TV.
is this a bug or there is something wrong with the HDMI?

A:Windows 8.1 HDMI cable must plug twice to get sound on TV

No other HDMI device (monitor/TV) to test? Tried a different cable? It could be the TV not detecting it until it gets the hand shake by plugging the cable in.

3 more replies
Answer Match 68.46%

firstly this is my first post so sorry if i sound noob.

ok so i installed windows 8 consumer preview build 8250 x64 last night. everything seems to be working correctly other than my sound. i am using VT1708s by via embedded in a asus m5a78l-m/USB3 motherboard now the problem is the sound is working fine via my HDMI connection but via the 3.5 mm jack the sound is all strange and un-usable its like according to my friend it sounded like it thought it was digital when it is analogue.

i have tried installed the windows 7 x64 driver from both asus and VIA but it didnt work still the same problem. i had to run it in compatibility mode.

please help me fix this thanks

A:VIA Vinyl VT1708s + 3.5mm Speakers Strange Sound (only HDMI works)

I'm in the same boat with my board....only difference is my sound works with the windows built in driver but I can't get the VIA driver to load at all.

10 more replies
Answer Match 68.04%

I have an HP Pavillion DV2-1209AV Windows 7. I just purchased speakers for my laptop. Logitechspeakers, but they are buzzing but not producing sound from my computer. What do I do to make them function properly?

A:I just connected Logitech speakers to my laptop but no sound...

Hi, Please try this first: Right click the speaker icon,Select Playback devicesRight click then Enable the external devices      Hope this helps:

9 more replies
Answer Match 68.04%

My speakers are no longer recognized by my computer. Sounds and audio devices says No audio device. Cant change device volume or speaker volume because It acts as if I have no speakers connected. the audio tab says no playback devices. they are all greyed out. I have never disconnected speakers and am sure they're plugged in correctly.

I had a virus that changed a lot of settings. It managed to disable system restore task manager internet connections and last but not least sound lol.
Not funny but somehow i overcame all those problems but im left with 1. I have run full scans with mcafee superantispyware hijackthis combofix etc.
Im sure most harmful threats are gone.

Please help by giving me simple and specific step by step methods of fixing this problem i am in desperate need of help because i just started school and this is all i have.

system details:
windows xp professional 2002, service pack 3
AMD sempron processor(tm) 3000+ 1.80 ghz, 992 MB of RAM
 

A:Solved: Speakers connected properly but No Sound!

16 more replies
Answer Match 68.04%

Hey guys! Quick question.

I'm trying to capture/record sound - not from my microphone though; I'm trying to capture what's coming through the speakers. This wouldn't generally be an issue, however the problem is that my monitor is a High Definition TV.

Basically this means that when I open Recording devices, I see 'Stereo Mix', but no sound actually comes through there as I don't use speakers, but rather HDMI from my GFX card (yes, it carries the sound too). I can select SHARP HDMI TV as the output device, but I can't set it as the input device. If I change output to Realtek digital, then I can record (via setting input to 'Stereo Mix') but it's useless as I can't hear anything at all. -_-

So the question is, how can I capture sound directly from the source, if my TV's speakers are the sound output device?
NOTE: I am already showing disabled and disconnected devices on the list, and all of my drivers are up-to-date.

Cheers.

System Specs:
CPU: Intel Core i7 4790
GFX: nVidia GeForce GTX 780 Ti
RAM: Corsair Vengeance Pro 32 GB
Motherboard: MSI XPOWER Z98
Windows 7, 64 bit
 

A:Solved: Capture Sound Directly Using HDMI Cable

Hi KaILLERa-Ninja, and welcome to TSG.

HDMI ports are not usually bidirectional and are either input or output only. Typical HDMI ports on computers are output only.

Does your TV have any kind of headphone or RCA line level audio output jacks?

What is the source of the audio that is playing through the speakers?
 

3 more replies
Answer Match 67.62%

Hi.

I don't know if Im posting this issue in the right forum.. My problem is that when I connect my earphones in the earphones hole on my sony vaio laptop, I do hear the sound through the earphones, but it also comes from the laptop's inbuilt speakers.

When I right-click on the speaker icon in the system tray, and then go to playback devices, all I find is speaker/HP (Realtek High Definition Audio).

Don't know what's wrong. Please help!

A:Headphones connected but sound coming from laptop's speakers.

Hi do you have this in control panel Windows 7 / Realtek HD Audio Manager: How to Set Up 5.1 Sound to The Best Parameters - YouTube

19 more replies
Answer Match 67.62%

Basic Specs

Brand New Toshiba Satellite C855
Win 8 64-bit
6 GB RAM

Display Adapter: Intel(R) HD Graphics (2000)
Driver: Intel 9.17.10.3040

Playback Devices
Show Disabled Devices - checked
Show Disconnected Devices - checked

High Def Audio Device displays as not plugged in


Cable is plugged inCable has been tested on backup laptopCable connected to HDTVVideo is fineNo Audio



I have spent hours installing and uninstalling drivers from the Toshiba and Intel sites. Tech support said to return it but I have just spent 2 days installing software. I never took a break to watch Netflix. Any suggestions will be greatly appreciated!

A:Audio Over HDMI Cable Not Working - HDMI Cable Not Plugged

The video is apparently not detecting the HDMI cable. Assuming you have a good HDMI cable it suggests a hardware problem in the new PC.

25 more replies
Answer Match 67.2%

I'm supposed to connect an S/PDIF cable between my soundcard and my graphics card to enable the sound to work on my HDMI cable (between comp and TV).

However, there is no such jack on my soundcard, which is an outdated Soundblaster Audigy Platinum.

For anyone who wants to help, the manual is here.

Can someone help me do something about this? I wish to keep this soundcard.... or at the last resort, buy a new soundcard which will solve this problem, but its gotta be cheap, and has something to connect to the front like my current soundcard, which takes .25" headphone jacks....
 

A:S/PDIF cable into Graphics card to enable sound in HDMI

I'm not an expert in this area but does your graphics card have an HDMI output connector at the back? If so, you don't need your sound card. HDMI carries both HD video and HD sound. If your TV has an HDMI input, you just connect the HDMI cable from the graphics card.
 

8 more replies
Answer Match 64.26%

Hi, I have a Pavilion dv6 with windows 7 operating system. the cable works with my friends computer to the tv but not from mine to the Tv.











Solved!
View Solution.

A:No Signal from my computer to TV with HDMI cable

Hi Zack1, Try this to see if it helps.  Download the Chipset driver and Graphics driver on the links below and save the installers to your Desktop. Chipset Graphics Driver Next, in Device Manager, open Display Adapters, right click on the Intel graphics chip and select Properties.  Click the Driver tab and then select uninstall.  When done, do the same for the for the Intel High Definition Audio Codec found under Sound Video and Game Controllers. Now return to the Desktop and install the Chipset driver and then the Graphics driver.  When complete, reboot the PC and see if this has helped.  Check in Device Manager that both the Intel Graphics and the Intel Hi Definition Audio codec have reinstalled successfully and whether you now see the HDMI Audio option under playback devices ( found in Control Panel, Sound ) as shown as the top option on the screenshot below ( ignore the fact that it's ATI, i just mean the TV icon option ). http://s175.photobucket.com/albums/w146/rproffitt2000/?action=view&current=7Speakers.png&newest=1 If it shows up correctly, try the HDMI connection and see if it now functions properly. Best wishes, DP-K

10 more replies
Answer Match 64.26%

I use my HDMI cord all the time to project/extend my pc screen, ( like dual screen) until one day, it stopped working completely. help?

More replies
Answer Match 63.42%

I have followed the instructions according to the BSOD posting instructions.

The problem is that the computer crashes when connecting the hdmi cable to my tv.

my best, alfredbk

A:BSOD when inserting hdmi cable from tv to computer

hi, use this link and click analyze system for updates.
Drivers & Downloads | Dell US

1 more replies
Answer Match 63.42%

I originally used to run a HDMI cable from my plasma screen TV to my Xbox and it would always look crystal clear where it would otherwise like quite horrible without the HDMI cable.

So I plugged the HDMI cable into my computer (Which has a GeForce GTX 550 Ti video card) and it looks horrible and fuzzy like it does without the HDMI cable.

Wot do?
 

A:Why wont my plasma tv run HD with a HDMI cable to my computer?

The only thing I can think of off the top of my head is make sure that the resolution of the TV matches the resolution the PC is trying to give it.
 

2 more replies
Answer Match 63.42%

So basicly I was trying to hook it up to TV then I wouldn't budge so I pulled harder then the cord separated leaving HDMI tip stuck hanging out of the port I need to remove this quickly please let me know what to do I tried tweezers

A:my hdmi cable broke and now the hdmi tip is stuck in my hdmi...

I meant to say HDMI tip is stuck in my laptops HDMI port I'm only 13 and I don't know how to take apart and I'm looking for non repair answers 

3 more replies
Answer Match 63%

i recently got a new computer case and installed windows 7. everything is working fine except for my sounds plugs and my LED's (that's going to be another thread). I've had a foxconn a88gmv for a while now (plugging in speakers in the green jack worked before). i have a coolermaster haf x (this is new). i also have all the drivers for the case and motherboard installed, and the speakers work when i plugin my ipod. i also have all the settings correctly setup. the problem is that they don't even appear when i plug them in the motherboard or in the front. could it be that the wires that connect the motherboard to the case a plugged in wrong(if so, then please give me specific instructions on how to plug them in because i've tried before(with the manual) and it still hasn't worked before)?
oh and, right now my sound works through the hdmi cable that connects to my tv.
dont hesitate to ask about more details.
thanks a lot in advance.

A:speakers dont work when connected to my computer!!

computerNewbie,
Welcome to SF. Are you saying that plugging your speakers into the rear mobo output or headphones/speakers into the front causes no sound to emit?

9 more replies
Answer Match 63%

I have an Acer H233H monitor that is capable of using either a DVI or HDMI cable, new computer has both outputs.. I am using the HDMI cable and when I reboot my computer i lose my video signal to my monitor. If I turn my monitor off and on the signal returns. My monitor is set to HDMI input, so I don't know if this is a Win 7 thing or just a configuration that I am missing.
I used the DVI cable and everything worked fine, monitor came on on reboot as it should. I can't use the DVI cable I have because it is too short, which is why I have switched to a HDMI cable.
I have no problem buying a longer DVI cable if this is a HDMI quirk that cannot be fixed.
Any ideas or suggestions?
Thanks.

A:No vidio signal with HDMI cable on Computer Reboot

I am afraid I can't help you with a solution to your issue, but I can certainly say that it's not the norm for it to do that.

I have used both HDMI and DVI on my current monitor and they both work completely normally.

Cheers

Paul.

9 more replies
Answer Match 62.58%

I have a digital SLR camera, the Sony A200 and when I connect it to the computer running Windows 7 premium I get no response from the computer.
The camera should automatically appear on screen with prompts to import pictures or view them.
Can anyone help with this.
Thanks

A:computer does not see camera connected by usb cable

Hello george5855. Welcome to the forum.

Take a read of this: Scanner and Camera Installation Wizard and let me know if that solves your problem.

7 more replies
Answer Match 62.58%

Hello, this looks like a great forum, I'm hoping someone can give me some advice.

I have a Gateway Profile 3 that we used for several years and recently gave to my mother-in-law as her first computer.

It worked ok for her for awhile, but suddenly stopped working. When it's turned on, you can hear the fan start up and the HD light comes on briefly. I think it starts to spin, but it's hard to hear over the fan. The main power light never comes on, and the computer will just freeze at a blank screen, no POST, no beeps, nothing. The HD light will go off and that's it.

I opened it up and disconnected the HD and I/O connectors for the keyboard/mouse and it POSTed with an error.

Reconnected the HD and it POSTed with the same error.

Reconnected the I/O cable and it didn't POST, it was blank like I described above.

I bought a new cable, and tried that, but it still doesn't work. I'm afraid that it might be something wrong with the connections at either end, but I don't know how to check that or if there's really anyway to fix it if that's the problem.

Thanks for any suggestions you might have!
 

A:Computer won't post with cable connected

7 more replies
Answer Match 61.74%

Cant get speakers to play on computer, but will play on other devices.
 

A:Labtech speakers wont play when connected to Asus computer.

Hi can you provide more info on computer and the type of speakers
 

2 more replies
Answer Match 61.74%

I have a computer here that will not boot if the ethernet cable is connected. It will stall out on the bios splash screen. If you disconnect the cable and try again, it will boot fine and you can then attach the cable and have networking. It will then lock up ramdomly and you have to repeat the whole thing.
The cable looked strained, so I replaced it to no avail. Tried reinstalling the drivers for the on board LAN adapter and that didn't work either. Added a network PCI card, disabled the on board and all is fine.
Maybe someone could shed some light as to how an faulty Ethernet adapter would actually stop the POST when the cable is plugged in? Shouldn't it just skip it?

thanks,
Spline
 

A:Computer will not boot when ethernet cable connected

Do you have PXE boot enabled or the boot order set to boot from the NIC first?
 

2 more replies
Answer Match 61.74%

This is a crosspost from the Microsoft Windows forum. I hope I won't get into trouble for it but I really need help.

There is a LOT going on here so I may forget something, but here goes.
O/S - Windows 2000 sp4
Problem: Whenever the Network cable is plugged in, the machine reboots (this does not occur when in Safe-Mode with Networking Support).

Causes: Upon examination, I suspected a virus. Opened in safe mode with networking, re-installed Symantec Anti-Virus which was crippled and updated virus definitions. System scan revealed 124 virus-infected files, some of which it could not quarantine.

Ran Spybot with latest definitions. It stalled about 3/4 of the way and program locked up.

Ran Ad-Aware with latest updates . . . nothing.

Checking system error log, I see two errors each time the reboot occurs.

They are:
Service Control Manager
The WebSeach Toolbar support NT service service failed to start due to the following error:
The system cannot find the path specified.

Service Control Manager
The Client IP-IPX service failed to start due to the following error:
The system cannot find the file specified.

Below, I am posting the H/J log. Any help here would be deeply appreciated.

Logfile of HijackThis v1.99.1
Scan saved at 11:22:45 AM, on 3/9/2007
Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\se... Read more

A:Computer reboots when network cable connected

Those error messages are likely due to the fact that a couple of malware services are trying to load without their files on the system. Some security app may have removed the files already.

Hello and Welcome. Please subscribe to this thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Subscribe.

---------------------------------------------------------------------------------------------

I'd like a bit more information, please.


Download ComboScan to your Desktop.Note: You must be logged onto an account with administrator privileges.Close all applications and windows.
Double-click on comboscan.exe to run it, and follow the prompts.
When the scan is complete, two text files will open - ComboScan.txt <- this one will be maximized and Supplementary.txt <-this one will be minimized
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of ComboScan.txt here.
Please attach Supplementary.txt to your post.
To attach a file to a new post, simplyClick the[Manage Attachments] button under Additional Options > Attach Files on the post composition page, and
copy and paste the following into the "Upload File from your Computer" box:C:ComboScan\Supplementary.txt

Click Upload.

---------------------------------------------------------------------------------------------

19 more replies
Answer Match 61.74%

So some months ago I bought the parts for my comp and put it together and it worked just like I'd hoped.

Now lately I've been having more and more problems, first when I booted my comp it would power down giving me a message that the SB was overheated (even though my comp hadn't been turned on since last night.

So I thought it was just a fault in the thing that would show the temperature, since nothing I've done before has made anything in my computer warm at all, not even playing or anything.

Now this morning I wanted to turn on my computer and it turns on for less than a second (all fans running, harddrive and power supply running) everything seems to have power as usual, all the LED's lighting up when I power up my computer.

So I have spend all morning trying to figure out what it might be, and I can now get my computer to power up, but that is if I take the CPU's power cable out, as soon as I plug it back in the computer shuts down.

I'm running with:
Intel Core i7 920 2.66 GHz
6 GB Corsair 1333 MHz RAM
1 TB harddrive
Nvidia GeForce 295 GTX

I'm using an Antec 1200 case with 6 build-in fans
using a Zalman CPU fan cooler for the CPU

What I have tried so far is to take out most plugs and plug them in again, changed the heatsink paste on the CPU and nothing of it works exept for when I unplug the CPU power cable.

I really need all the help I can get.
 

A:Computer not powering up while CPU power cable is connected

Try resetting your motherboard and see if it boots-up
 

4 more replies
Answer Match 61.74%

Had to replace motherboard from authorized acer parts dealer now I get no sound through HDMI port. I did through the original board until it got fried by electrical surge. Can any one help or send me a picture of the inside the same model to make sure all jumpers on the motherboard are in the right spot. Or if any one else had this problem tell me how you fix it. It does not have HDMI sound icon in the mixer. What I have done:
1. I have looked for disabled devices.
2. Tried looking in sound mixer settings for the default audio.
3. New install and drivers.
4. Tried a system utility software RegInOut. Looking for serious replies on fix even if it was not an Acer.

specs:
AMD Athlon II X4 Quad-Core Processor 640,
Windows 7 Home Premium,
NVIDIA GeForce 9200 Chipset, NVIDIA GeForce 9200 Graphics Integrated ,
4096MB DDR3 Memory,
1TB SATA Hard Drive (Green Product ? variable RPM),
16X DVD?R/RW SuperMulti Drive,
Multi-in-1 Digital Media Card Reader,
802.11b/g/n Wireless,
High Definition Audio with 5.1-Channel Audio Support,

Any help appericated

A:NO SOUND TROUGH HDMI ON ACER AX3400-U3032 and No HDMI Icon in sound se

Welcome to the Seven Forums

One thing you could try is to open up the Control panel then click on Sound and then go to the Playback tab and see if there is anything in there to enable it that's what I had to do on my laptop.

Jerry

9 more replies
Answer Match 60.9%

i have a hp laptop that i use for dj but when i connect external speakers it has static when connected to audio jack from computer when i unplugg my ac adapter the static dissappears

please help step by step instructions

A:[SOLVED] external speakers has static when connected to audio jack from computer

i was able to fix the problem it had something to do with the ac adapter i was using a 3 way socket plug that caused the static but when i changed the plug into a 2 way socket there was no static now im playing music with a crispy clear backround

1 more replies
Answer Match 60.9%

Here are the computer specs of the computer in question:

Ultimate SP1 64-bit
Xion 600W PSU XON-600F14R-201
Asus M2N32-SLI Deluxe Motheroboard
nVIDIA nForce 590 SLI Chipset
BIOS Revision 1402
NVIDIA GeForce 8800 GTS 640MB
AMD Athlon 64 X2 Dual Core 6000+ 3.15 (15 x 210 FSB)
Muskin 4GB (2 x 2GB) 991587 DDR2-800 SDRAM 5-4-4-12
Koolance EXOS2 Watercooled
OS Drive: Seagate Barracuda ST3500820AS 500GB
DATA Drive: Samsung HD501LJ
NVIDIA nForce 10/100/1000 Mpbs Ethernet
Realtek RTL8187 Wireless 802.11b/g 54Mpbs USB 2.0 Network Adapter

The CAT 5 Ethernet cable network cable is attached to our main Linksys WRT320N DD-WRT router ---> Motorola SB5101U DOCSIS 2.0 Cable Modem ---> Coaxial cable from wall outlet. Another computer is also directly connected to the same router via CAT 5 Ethernet cable and two more computers are wirelessly connected to the same router and none of these three PCs are experiencing issues so this should rule out the router as the culprit.

---------------------------------------------------------------------

The issue/symptom/scenario: If I leave the computer on (even for hours) with no network cable attached to the computer, it does not turn off. But as soon as I plug in the network cable, the PC will shut itself off within 5-15min.

Based on the same scenario as described above, here are the troubleshooting attempts I made without success, except for numbers 4 and 6:

1. Switched to different network cable and router port.

2.... Read more

A:Computer shuts off within 5-15 minutes after network cable is connected.

Even though this is not a blue screen crash, please follow the blue screen / crash posting instructions. Those provide system logs and network configuration logs that can help with network related issues.http://www.techsupportforum.com/foru...ta-452654.html
One possible problem could be malware, but we will need to see the logs to determine if other causes may be possible.

1 more replies
Answer Match 60.9%

I have no applications running at all in Windows. I have the system sound muted, but I still have some sound coming out of the speakers. It sounds like some talk radio. I also have all networking disabled. I have no idea where this is coming from.

How can I tell if any process on my computer is accessing the sound drivers?
 

A:Solved: computer sound muted but sound is still coming from speakers

In some cases, if the speakers are cheaply made and not sheilded, they can acutally pickup radio waves (especially if you live near a radio tower). Does the "Talk radio" continue if the speakers are on, while the computer is off?
 

2 more replies
Answer Match 60.9%

i  have no sound at allll coming from computer i have no external speakers but i still had some sound coming from the speaker on the compter the speaker icon has a red x in front of it,  i work on a desktop windows 7 professial system thanks

More replies
Answer Match 60.9%

my computer has no sound. I cannot figure out why. I reinstalled my Avance AC'97 sound driver and no luck. the speakers work fine. does anyone know what i can do? I didn't change anything before the sound went out. It just isn't there.
 

A:No sound from computer, speakers work fine... Avance AC'97 sound

physically check your cables, as usually this problem is caused by human error. next, check all of your volumes. what OS, service pack, and version are you running?
 

27 more replies
Answer Match 60.48%

Just got finished building that computer, installed WinXP Pro Corp, and the motherboard (Shuttle AN35N Ultra) has integrated LAN/Ethernet cable connector. So I decide to run the cable to my room. So I connect a cable into the last open router slot, run the cable along the wall, plug it in into a coupler, plug another ethernet cable into the coupler, then into my room and into the motherboard's integrated Ethernet slot.
I open IE and it doesn't connect. I restarted and it doesn't connect. What can I do to get this motherboard to detect my Ethernet cable?
 

A:Problem With Connecting With Newly Connected Ethernet Cable In New Computer

Oh, and also, the status lights on both the motherboard and the router are on, which means that it's connected, but the stupid computer doesn't recognize that it IS connected.
 

3 more replies
Answer Match 60.06%

ok so i got a new compaq pc and my old polkaudio speakers wont work! does anyone no what the problem is? i no that they are connected properly, and the volume is cranked to the fullest and all sounds still play quietly. the speakers worked properly on my old pc though.
 

A:speakers not working properly, sound is very low, connected properly, please help!

I think...

1.You may have accidently adjusted you sound configuration settings.
2.You may not have the correct sound Drive (Or none at all). If so check your sound card and browse the web for installable driver (The acctual drivers don't cost anything)
 

5 more replies
Answer Match 59.64%

Hello quick question so i'm clear and to see what you would suggest.

I have a new upgrade LG 55 inch 4k TV connected to my PC via HDMI to GTX970 I've read this TV supports audio also via the same HDMI cable plugged in to my video card. I'm a huge gamer.

Right now I have a X-Fi Xtreme Gamer sound card connected to a 4.1 Logitech setup w/sub. I've been using this for years and it works great for surround sound when available and EAX is always a plus SO whats my benefit to 86 the 4.1 and just go HDMI?

In that case I lose the 4 speaker setup correct and just use audio from the TV?? I can't see the advantage for this unless i'm missing something big. I don't use SPDIF output or the Dolby digital or DTS encoder from the card I assume all that you need a receiver.

Can I use HDMI output for audio and STILL use my 4.1 speakers? I don't want to invest in a receiver or anything like that at this point. What would you do if you were me? i'm at work now but I read if I go into the sound properties/playback devices I can choose HDMI output? I'm curious to see how that works.

thx!

A:HDMI cable for audio or keep my 4.1 w/soundcard? need help w/HDMI

Windows only allows one default audio playback device. e.g. HDMI or Speakers (your sound card). HDMI audio is generated on a sound chip in the Video card. You don't have all the options you do with a Sound card.

9 more replies
Answer Match 59.64%

I have a video card with both a DVI and an HDMI output and a monitor with only an HDMI input. Should I connect my monitor to my PC with an HDMI cable or with a DVI - HDMI cable?

A:Should I use an HDMI or HDMI-DVI cable to connect to my monitor?

Hdmi

4 more replies
Answer Match 58.8%

Hi there, My sound is not working. I only have a HDMI Sound output. However, I don't have any HDMI Output in my computer. I reinstalled windows a couple of times lately, but i don't know for sure if thats the problem.
Right now im using Windows 7 32-Bit, My hardware specs are: CPU: Intel Duo 2 Core. Graphics Card: AMD ATI Radeon HD 3800 Series. Any help or such will be Very much appreciated

A:Sound not working, Only have HDMI Sound Output, But no HDMI port in PC

the HDMI sound is most likely off your GPU but that series seems to not have a HDMI port so that is odd. If you can make sure your onboard audio is on in your BIOS and also run the tool on this page so that you can update all your system info for us. System Info - See Your System Specs

3 more replies
Answer Match 58.38%

I just upgraded my notebook to Windows 10 anniversary update build 1607 from a older build (14xx build) and I can't get sound in my tv connected through HDMI. I installed the lastest driver from the HP support website. The audio driver is not functioning well. Here is a screenshot from my device manager:  Thanks for your Support











Solved!
View Solution.

A:No sound to tv when using HDMI from computer

Hi: See if this works... Since the graphics driver is working, let's not trifle with the actual graphics driver. We need to install the Intel HD audio driver which is why the audio isn't working out of the HDMI port, and that is the problem HD audio device you see listed. First download and install this free file utility  The 2nd file on the page is for 64 bit. http://www.7-zip.org/ After you install 7-Zip, download and save but do not run the Intel graphics driver from your notebook's support page. This package provides the driver that enables the Intel High-Definition (HD) Graphics in supported notebook models that are running a supported operating system. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp72370.exe Once you have saved the graphics driver file, right click on it and select 7-Zip from the list of items. Have 7-Zip Extract to: and let it extract the driver into its folder name (sp72370). After 7-Zip does its thing, go to the device manager and click on the problem HD audio device in your screenshot. Click on the driver tab, click on Update Driver. Select the Browse my computer for driver software option and browse to the driver folder 7-Zip created. Make sure the Include Subfolders box is checked and the driver should install. Then restart the PC, and you should get both audio and video out of th... Read more

4 more replies