Tech Problem Aggregator

WLAN button on compaq presario

Q: WLAN button on compaq presario

I have the above notebook and my WLAN button will not stay engaged. I am writing simply to ask if anyone knows if this is a common problem with these machines. I bought it new at Best Buy about 8 months ago. I did not get the extended service agreement. this problem first occurred a couple of days after my 30 day warranty expired. I took it back to Best Buy the next day and the button was working properly. the person at the repair desk at Best Buy said these machines are known to have this issue, however I have not heard anything about it since. The WLAN button worked fine until yesterday. online chats with HP were no help. I will take it to a repair shop to get it fixed. I would just like to find out if anyone has heard or knows if this is a common problem with these machines....thank you.

More replies
Answer Match 79.8%

Upgraded my Presario 2568 to WinXP, everything works, except the on/off button for the integrated wireless lan (front right side near blue LED and IR). This worked before the upgrade from XPhome. There is a heading under Start Menu called Utilities:

Start Menu>Utilities>Wireless Configuration

There is a dialogue box that opens, and says "The following devices are controlled by the wireless on/off button. Click an icon below to turn one device on or off."

There is nothing in this list. Anyone know how to get the HP WLan 54g device listed in there?
 

A:Compaq Presario 2500 WLAN On/Off Button

Have you gone to the HP website and download all the updated XP Device Drivers? You may also want to check the FAQ on that site to see if its a known issue.

One last thing, Go into Control Panel -> System -> device manager and see if there's any missing drivers or errors.
 

2 more replies
Answer Match 80.64%

I have a Compaq Presario SR1879UK and when I pressed the start button on the tower the PC did not come on but the light surrounding the start button flashed continuously. I tried to press the button in to turn it off but nothing happened and the light kept flashing. Eventually I turned the power off at the wall. When I turned it back on the same thing happened. However, when I tried after about an hour turned off at the wall the PC came on as normal. It has done this several times variously coming on and not. Now it will not come on at all and the start button light keeps flashing.

Would be grateful for some help.

Thanks
mygoose
 

A:Compaq Presario Start Button problem

16 more replies
Answer Match 79.8%

Hi there,

What can be done with a PC that won't respond when you pressed the power-on button. Looking at back of the PC, the light of the power supply is on, but the power-on light goes out almost instantly after pressing it.

any ideas and advices will be greatly appreciated please.

thank you.

A:Compaq Presario CQ5300Y PC won't respond to power-on button.

Zeamann: What you might have is one of your devices, hard disk, dvd rom or memory that is causing your problem. I would recommend unplugging the machine and verify that the memory is seated properly and that all the cables from the Power Supply are connected properly and seated.
Do you get any beeps or indications that things are starting up?

What were you doing before you tried to turn it on?

Rich

9 more replies
Answer Match 79.8%

i have a compaq presario 5000 w/ pentium 4 1500 mhz 512 mb ram, with windows xp
i recently tried to start it up and i pushed the power button but it wont start at all. i am sure it is plugged in and it is getting power since there are two little green lights in it. whenever i push the power button another little green light goes on but the computer doesnt start. i checked all of the connections and they all seem to be in good. Can anyone help me solve why it wont start?
 

A:compaq presario 5000 power button problems

10 more replies
Answer Match 78.12%

Hello,

When I power on my Compaq Presario, the screen remains black, the key next to the power button is orange, the Caps Lock key is blinking and a light blinks above the "home, end, num lock keys", in the upper portion of the keyboard. I have tried taking out the battery, unplugging the power and holding the power button for 60 seconds, before trying it again, and I am not getting anything...HELP!!
 

A:Compaq Presario CQ61 Black sreen-orange button next to power

Try re-seating the Ram. If that doesn't help remove the Cmos battery for a few minutes then put it back, it looks like a silver coin and should be visible near the ram.
 

1 more replies
Answer Match 65.1%

Hi, My Computer a Compaq Presario SR1810NX with Windows XP Home Edition SP2 is having an issue with it wont get past the Compaq Logo Screen, like, I press the power button the PC powers on, Fan Speeds up and then slows down as normal, keyboard lights flash as normal and the Compaq Logo along with the v3.48 and ESC = Boot Menu options appear on screen, the things is that it wont get past this screen, it just sits there at the Compaq screen, the keyboard and mouse dont seem to be interacting with the PC since I press ESC or F10 for boot mode or system recovery but the PC wont answer at all, I've already Disconnected power source unplugged mouse, keyboard all but PC is doing the same thing just sitting at the Compaq Logo Screen, the computer doesnt make any sound at all no beeps or anything, it wont let me access Windows at any time, recent installations well could be that I just installed a Mobile Bandwidth Card just a couple of weeks ago, and also just a few days ago I connected my iPod Shuffle 2nd Gen to the computer and the computer wont recognize it at all, not even charging, I know this might be a virus or malicious software, but my computer has barely connected to the internet in the last weeks (I couldn't pay the Internet and I had to use my friend's Mobile Bandwidth Card I mentioned before) all I did while in Internet with the Mobile Bandwidth was some schoolwork and youtube videos, I need help urgently with this since I have to deliver a very important proyect for scho... Read more

A:Compaq Presario SR1810NX Not Getting Past Compaq Logo Screen

Try a power drain.
1. Unplug power cord
2. Hold power button in for 60 seconds or more then let go
3. Plug in power cord
4. turn on the power and try to boot to setup (BIOS)

If it enters the BIOS then you should be able to just press F5 to reset to defaults and then F10 to save and exit. The PC should work now.

However, if after the power drain you still can not get in the BIOS than there is a MAJOR problem which would require some type of repair.

1 more replies
Answer Match 65.1%

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

1 more replies
Answer Match 64.26%

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

14 more replies
Answer Match 60.48%

hello guys

I have installed windows 2009 SP3,
my laptop is HP compaq presarios 3700,
I but still cannot log in to the internet, whenever I start my OS showing me the wireless WLAN is disabled,

I went to check device manager and checked under : Network Adapters, I saw only 1394 Net Adapter, this is the only device there,
what should I do to fix this problem or find the software to fix it,

many thanks in advance
 

A:how to install WLAN for HP comparq presario V3700

11 more replies
Answer Match 57.54%

Hi, I would like to deactivate the Wifi Button (orange LED) as default. So that its only acitvate if the user press the button.After a reboot it deactivated again. I didn´t found anything in the bios. Is that possbile ? Many thanks

More replies
Answer Match 57.12%

so my friend got a compaq cq58 a day ago but the wireless isnt working, i tried alot of drivers but none worked,been sitting for about 5 hours,none of the drivers work and i dont know why but the cable lan works perfectly.please help

A:Compaq CQ58 WLAN driver problems

Hi there ... Have you tried the Driver from the HP website ..

4 more replies
Answer Match 57.12%

sir, can u help me, i can't fint my driver for compaq presario v3760TU
previously, i used vista home basic but i convert to window seven.. but i can't find my driver in hp/compaq driver web.. plzz help me..
-sory for my english so bad..

A:compaq presario

Were you at this Hp/Compaq download page ?


Software & Driver Downloads Compaq Presario V3760TU Notebook PC - HP Customer Care (United States - English)&

6 more replies
Answer Match 57.12%

my compaq presario cq57 says system disabled 62359871..plz help. thank you











Solved!
View Solution.

A:compaq presario

@sharp66? Enter   73031277

3 more replies
Answer Match 57.12%

I friend of mine purchased this Presario in 2004. She hasn't had internet since about 2006, so she hasn't had any of the updates since then. I brought her tower home with me since I have internet to load her updates. We're trying to get it internet ready. When I brought it home last week nothing would open. So yesterday she gave me the system recovery disc. I started with the Standard Recovery, but there were too many files that it couldn't recover. So I then decided to do a full recovery. After the full recovery it was rebooting and it told me that not all the system could reload and I couldn't hit okaybecause it wouldn't read / acknowledge my mouse. So, I unhooked her computer and rehooked mine to see what her alternatives were. I found a website, they wanted to know all the things it wouldn't oload. All I can remember is that it was things that could me downloaded later like: Norton, AOL, Adobe, MSN, and QuickTime.

So, I unhoked mine and rehooked her's up (and booted up my laptop). When her's came back up it's saying: NTLDR is missing Pres Control + Alt +Delete to Restart

My question for you is there anyway I can save her conputer? She doesn't have a lot of funds, being a singe mother of a 7 yr old and I'm just a good friend trying to help her out.

Thank you in advance for any help you can provide

A:Compaq Presario

I decided to see what happened when I ctrl alt delete and then decided to do another recovery. Here's some more info (could not recover errors):
1. C:\WINDOWS\Help\SB\Training\WXPPer\Content\Wave\[email protected]
2. C:\WINDOWS\System32\ntdll.dll
3. C:\WINDOWS\System32\ntkrnlpa.exe
4. C:\WINDOWS\32\dllcache\dinput8.dll
5. C:\Windows\systme32\dllcache\licdll.dll
6. C:\WINDOWS\system32\dllcache\locator.exe
7. C:\WINDOWS\system32\viaservc.dll
9. (Black screen instead of error message)
9. C:\WINDOWS\Installe152ec/msi
10. C:\WINDOWS\Installer\1b2cc.msi

then all of after about 20% a big blue screen with following:
A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. IF this screen appears again, follow these steps:

Check to make sure new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup... Read more

3 more replies
Answer Match 57.12%

ok when i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do. Thanks
 

A:Compaq presario help

16 more replies
Answer Match 57.12%

I have purchased a Compaq Presario 600 with an Athlon XP 2200+ processor. I do not have a copy of Windows XP to wipe it with. Is there any way with the installed XP that I can refresh this system and remove data frome previous owners? Or Can I load Win 98?
 

A:Compaq Presario 600 ??

Compaqs usually have a hidden partition with all the factory loaded software on it in an image format. As long as it does and you can figure out how to access it you could probable do that - but you almost likely need the XP Product key and may need to reactivate XP after the recovery. XP can only be install on one machine at a time - so if they are still using it you are out of luck.

Watch the boot up for any recovery messages or take a trip to www.Compaq.com and look up the info for your make/model.
 

1 more replies
Answer Match 57.12%

How do you open the casing on compaq presario 5304. I don't want to breakit.\

Thanks.
 

A:compaq presario

Link to tell you all about your computer. http://h10025.www1.hp.com/ewfrf/wc/...ry&tool=prodinfoCategory&dlc=en&product=93186
 

1 more replies
Answer Match 57.12%

I have a compaq presario. I have 2Gig memory. I changed services from ATT to comcast internet. now my pc needs to be wiped clean and set up again but when I got the computer I did not get the discs. how can I do this without discs> it wont open up the internet even though I am connected.

Please help
 

A:compaq presario pc

8 more replies
Answer Match 57.12%

How do you access the Bios on a Compac Presario 4110. I keep getting the message 162 Sytems Options not set. 163 Time and Date not set. Having visited Compac they were not a lot of help. Downloading the software recommeded by them was a waste of time, still got the above message. Tried all the usual keystrokes etc no good. Any suggestions would be appreciated.
 

A:Compaq Presario

9 more replies
Answer Match 57.12%

Hi. Does anyone know if a Compaq Presario SR1150NX does the display system support component video (Y, Pr, Pb) signal output function? Thanks
 

More replies
Answer Match 57.12%

ok I hace a compaq that is all messed up. lets see one day the monitor would not work after a storm. Bought another, For a while the screen would be blue but change back to normal. The pc also would have a hard time starting up after it was in idle. We would do a hard start and for a while that worked. Now when I try to start it it turns on but the monitor says no vga/dvi input. There is also none of the preverable beeps that are supposed to be there so in short (well long)the motherboard is fried? So do I use it as a planter in the yard or is there a way to get it up and running. It runs on XP media center it has a micro ATX form factor motherboard it is also an AMD 64 Anthlon. ram is 256 mb 1Rx16 pc 4200 ddr2 533 mhz. With all that said can I just replace the motherboard and reinstall the reinstallation disks and be up and running? ( if it could only be so easy) What about the cpu. i know many questions here thanks for patients. Please help me. Tina
 

A:compaq presario

does your system have agp or pciex (or even pci) slot free? Is the graphics on board? It sounds like a graphics card problem, even if it is onboard. I'd try a replacement card (even if it's just a pci card) and see what happens...
 

1 more replies
Answer Match 57.12%

Heres the problem i reinstalled xp. When I did this I couldnt get any sound so I went on hp website installed all drivers for sound problem solved. Then my wlan button wasnt going on like it normally does so i installed all wireless hp assistant and drivers for it. Now it keeps on saying wlan disabled but I cant get it to enable wireless, the button wont flash up like it used to when I pressed it. All i need to do is to get the button to flash up like it used to do as soon as I press it? Does anyone know how to do this? My laptop is the compaq persario v5000 if that helps Also this is the website with all the drivers for my laptop just let me know if i should download any of these to fix it http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&cc=us&dlc=en&product=499847&lang=en. Thanks for your time
 

A:My WLAN button wont flash up

6 more replies
Answer Match 57.12%

My WLAN button on my compaq presario cq57 is not working how can I turn on my wifi from my computer?
 

A:Wifi WLAN button not working

First check the status of your adapter in Device Manager, then if that is OK go to Control Panel, Network and Sharing Center. In the upper left corned, click on Change Adapter Settings, then look at the status of the adapter; right click it and see if the option to Enable is available.
 

3 more replies
Answer Match 57.12%

Heres the problem i reinstalled xp. When I did this I couldnt get any sound so I went on hp website installed all drivers for sound problem solved. Then my wlan button wasnt going on like it normally does so i installed all wireless hp assistant and drivers for it. Now it keeps on saying wlan disabled but I cant get it to enable wireless, the button wont flash up like it used to when I pressed it. All i need to do is to get the button to flash up like it used to do as soon as I press it? Does anyone know how to do this? My laptop is the compaq persario v5000 if that helps Also this is the website with all the drivers for my laptop just let me know if i should download any of these to fix it http://h10025.www1.hp.com/ewfrf/wc/s...499847&lang=en. Thanks for your time
 

A:Please Help my WLAN button wont flash up

You have installed the driver for the wireless adapter and other chipset drivers, right? And you go into Network Connections, right-click on the wireless connection and choose 'enable' but it stays at disabled? Plus you cannot switch the wireless on?

If the above equals three 'yes' answers, I think the wireless adapter has failed.
 

1 more replies
Answer Match 56.7%

I have had this PC since 2001 and it seems to be in good working condition. It originally came with Windows ME and two years ago, I upgraded the OS to Windows XP. I need help to clean the computer and start over as new. How can I do this?

Thanks

More replies
Answer Match 56.7%

got a mates comp to try to fix(presario sr1055cl)
when it starts up it defaults to a start windows normally black screen with three commands above like start in safe mode etc

if left it keeps rebooting to this page
if i press enter it goes to compaq sign and looks like it gonna work but then goes back to same screen

i can get into the bios and can do a system recovery but it just puts me to a plain light blue screen and nothing happens

please help
 

A:compaq presario won't start

7 more replies
Answer Match 56.7%

We have a very old Presario 4550, connected to an old cathode tube display and we also can't find a functional printer with old fashioned connectors. There are two USB ports on the back of the tower - could we connect a more modern display and printer to this tower using the USB ports?

More replies
Answer Match 56.7%

I have a Compaq Presario 2700T with problems. When I press the start switch it runs for about five seconds and then shuts off. It doesn't even run long enough to give me any screen image. It does this on every attempt to start the computer now. Prior to that it flashed a blue screen on a previous start attempt but not long enough to read what it said.
Any ideas what is going on?
 

A:Compaq Presario 2700T

Does this happen when the power connector is attached?

Are there any lights on when the power connector is attached? For example, does the battery charge?

Do not be rough with the cable, but the power plug that connects to the laptop, does it make any difference if you gently bend the cable around or move the connector in the socket? (Occasionally over time either the cable becomes damaged or the socket becomes loose)
 

2 more replies
Answer Match 56.7%

ok the dilemma is simple ok i bought this new laptop for the wife then it came with a built in webcam truth is i don't want that webcam so i bought another webcam that i am trying to use on msn but the laptop states found new hardware but doesn't install my webcam is usb ported it says m style on the cam the only thing it uses my wife states that she can access the cam thru the control panel but not in msn why is this occuring if someone could get to me asap would be greatly appreciated thanks in advance
 

A:Ok new laptop compaq presario

You may need to disable the original webcam

You can disable it by going to: Device Manager (Start->Run-> Devmgmt.msc)

Then locating your Webcam (that you don't want to use) and then right click on it and select disable

Then go back to MSN and use the settings to set up the new webcam
 

1 more replies
Answer Match 56.7%

I have a Compaq Presario 1200 laptop that won't come out of hibernation. With either the battery or A/C cable the power on light on the keyboard will come on after the power switch is pressed and a couple of seconds of clicks from the vicinity of the 3 1/2 floppy or the hard drive area but nothing else - no beeps or anything on the screen.
I talked to Tech support (I am out of warranty) and tried their suggestions - removing all power and pressing the power button and then reinserting the battery; turning it off, removing power for 24 hours and then turning it back on.
One suggestion I had from another source was to remove the CMOS battery but I can not figure out how to access that part of the case. I can get to the hard drive but not the battery.
Any suggestions or directions on removing the CMOS battery?
 

More replies
Answer Match 56.7%

I have a problem with my laptop screen. The screen is dark, however, the data is still there. Can't turn lamp on, or change anything, but can hook up to a monitor and it works. Can I fix the screen to work again? If I hit the button that turns the screen off and closes the computer down, the picture pops up for a few seconds and it is slightly red.
 

A:Compaq presario R3000

Its most likely that the backlight has failed. It can be fixes but it costs a upwards of $100 to do by a professional. You could try buying the parts online and doing it yourself though if you are technically inclined.

Here's how: http://www.laptoprepair101.com/laptop/2007/12/09/replace-laptop-backlight-ccfl-lamp/
 

1 more replies
Answer Match 56.7%

Have a Compaq Presario 1020 - laptop. Info is as follows -
Series 2900A
Model FBV1433VQL1J
Serial V644HZD50299

Need a maintenance manual. Any help would be appreciated. Thank you.
 

A:Compaq Presario 1020

http://h10025.www1.hp.com/ewfrf/wc/product?product=94911&lc=en&cc=us&dlc=en&lang=en&cc=us
 

3 more replies
Answer Match 56.7%

I am not near this machine, it's 60 miles away, so I can't look myself, but can anyone tell me if this is one of those pieces of junk that has the BIOS on the Hard Drive, or is it on the Mobo (like normal) ?

The person wants me to rebuild it, and I have never rebuilt a PC that has the BIOS on the HD.

What do I need to watch out for ?

What I usually do is FDISK the HD and then Format it, and go from there.........

Compaq Presario 7470
 

A:Compaq Presario 7470

I believe its a normal setup. However, even if its not the compaq partition is hidden. It is either completely invisible to FDISK or its listed under Non-DOS partitions in FDISK. As long as you don't touch that you'll be just fine.
 

2 more replies
Answer Match 56.7%

hi,

i have one compaq c500,it's some keys are not working.i have to open it,i tried to open but can't , any one can help me.
 

A:compaq presario C500

Hiya and welcome to Tech Support Guy

I've removed your email address, as we reply to the forum, and putting it up may give you spam.

Can you explain a bit more on what you're trying to do? You say open it, do you mean log on?

Regards

eddie
 

1 more replies
Answer Match 56.7%

hello my laptop started melting charger tips from my sister used an universal charger since it wuz hers then. I checked the universal charger specs and it was not compatible with computer.The charger for my laptop is working perfectly bt when ever charging the tip gets extremely hot untill it starts to melt. I have recently changed the charging port on the motherboard but the laptop is still heating the charger tip. The system is compaq presario v2000 currently running on xp pro. i dnt want to purchase a new motherboard any suggestions on what needs to be changed.
 

More replies
Answer Match 56.7%

yeah, it's ancient, but i'm just getting it up and running to sell it. i got it from a friend. ok, my question is- why is the cpu fan missing? and why don't i see a set of pins on the motherboard for the fan?
i thought all cpu's needed a fan, so where's the power supply for it? (the cpu is a pentium 120mhz)
 

A:compaq presario 4112

Hi, Kerri Ann!

Not necessarily. A 120MHz may not need a fan on the CPU. It will more likely have a large heatsink, and an exhaust fan at the back.
 

1 more replies
Answer Match 56.7%

I have a Compaq Presario, Authentic AMD K-6 3D Processor.
In order to run DirectX 8.1 for my 5 year old to play his new TONKA games, I need to upgrade the video card. I have looked on the TRIDENT website (with no success) and was wondering if anyone has a newer version than I have. This is what I have:

Trident Blade 3D/MVP4 (63)
Trident Microsystems
Chip type: Blade 3D/MVP4
main driver trid_p3d.drv
v. 4.12.01.2214
Mini VDD: trident.vxd
VDD: *vdd, *vflatd
 

A:Compaq Presario 7360

6 more replies
Answer Match 56.7%

My friend has a Compaq Presario 5340, which I might say is being a real pain! She dropped it off to me yesterday to try to fix.
Here is my problem(s): The computer starts up fine until it gets to the Windows98 screen then it hangs. She had stated it was running slow then this problem has surfaced. I have been in the MSconfig and did a selective startup bypassing the Autoexec and config files, as stated by troubleshooters in Win98. I also have used the quick restore cd's that she has and the same thing still happens, it hangs on Win98 screen.
Does anyone have any suggestions or more troubleshooting to do before I boot it out the door? Also have thought about formatting the hard drive to wipe everything out, but I have heard it is difficult to reload programs on Compaq's. I don't have any idea if she has added any new software or hardware to this computer.
Please Help!!!!
 

A:Compaq Presario 5340: HELP!!!!!

Check the CPU settings in the bios and make sure that the CPU is not running overclocked.
If this is one of those 599lmr motherboard Compaqs, it'll do just what your saying if the CPU is set wrong.
 

3 more replies
Answer Match 56.7%

I have a Compaq Presario 2700T with problems. When I press the start switch it runs for about five seconds and then shuts off. It doesn't even run long enough to give me any screen image. It does this on every attempt to start the computer now. Prior to that it flashed a blue screen on a previous start attempt but not long enough to read what it said.
Any ideas what is going on?
 

A:Compaq Presario 2700T

I took the keypad off and found the heatsink and fan loose from the motherboard. The four soldered nuts that the heatsink and fan mounting plate screw onto are broken off from the motherboard. I am not sure if this is what is causing the problem but it's not good. I tried to start the computer while holding pressure on the loose mounting plate but it did not make any difference.
 

1 more replies
Answer Match 56.7%

I have a compaq presario c300 notbook. It will not boot. I get the compaq screen, then nothing. It will not boot to the cd either. The backlight comes on, so it's not that. Please help. I'm lost.

A:compaq presario c300

Welcome to TSF....

To get it to boot from the cd you have to change the boot order in BIOS. This can be done during boot up when you can open the BIOS and set it.

The cd you used is it the recovery cd for the computer?

1 more replies
Answer Match 56.7%

Right heres a very specific enquiry...

I have a Compaq Presario SR2125UK

Im looking to upgrade the graphics to a BFG 8800 GTS OC 320MB or the 640mb.

First question is can my processor handle it? (Intel Pentium D 915)

I know i have to upgrade the ram so im purchasing 4GB of DDR2 RAM for about £50 and im replacing the PSU probably with an OCZ Stealth 600W PSU. Do that sound viable? Ive only got 32bit windows so i know im loosing out on some ram but its a package deal lol.

I have tried reading into all the requirements for these upgrades such as power connectors from PSU to graphics card and motherboard and think i got a bit lost.

The BFG requires 12v of something which the OCZ provides along with more than enough power (425w required for BFG), plus both the motherboard and the PSU are PCI express compatible. And i have an extra slot to accommodate the doubledecked size of the BFG.

In terms of the required power connectors i was a bit lost. The OCZ said it has a 6/8 PCI express pin which is what the BFG requires but can somebody shed some light on this?

But im really just concerned that it was going to fit and work!

These purchases come to around about £150 so dont want to be thinking for another 100 squid i could have just bought a XBox 360! lol

Basically Im asking advise on the above upgrade decisions and any tips anyone has on installing these?

Any help would be appreciated, im sick of only being able to run pre-2005 games on a pc bought in 2007! I was pretty suc... Read more

A:Upgrading my Compaq Presario

16 more replies
Answer Match 56.7%

My old compact Presario 2100 won't boot up. It is using windows xp. I can't get it to boot up even in safe mode

A:How do I get my Compaq Presario lap top to boot

Is there an error message displayed before the computer restarts?If the message flashes too quickly to read, press F8 and select "Disable automatic restart on system failure"Disable automatic restart on system failure

3 more replies
Answer Match 56.7%

I have a Compaq Presario 7588
serial number: 8011dcw41090
With Pentium III 550Mhz processor I hear that I can up grade the processor to 1100 Mhz but I still need some information a bout the processor like the type of socket and the cache memory and if I can just buy a processor and install it normally without contacting Compaq service
 

A:compaq presario 7588

You'd probably need a Socket 370. I don't think the Tualatin based P3's would work for you. They are the ones with 512k L2 cache. You'd need a regular Coppermine based P3. (256k L2)
 

2 more replies
Answer Match 56.7%

How do you get to the HHD drive in the compaq presario 1456VQLIN?
 

A:Compaq presario 1456vqlin

I'm not finding that model so that must not be the model number. Typically, you turn over the laptop and the hard drive should be under a large panel...
 

1 more replies
Answer Match 56.7%

Hi Guys,

I am trying to install a Cyberdrive x16x12x40 CD-RW into a Compaq Presario 5000 series PC. If no other device is attached to either the IDE or to the power supply, and if the CD-RW isn't attached to the IDE then power will get to the CD-RW. If the CD-RW is attached to the IDE and/or any other device is attached then no power goes to the CD-RW.

Can anyone shed any light on why this is and how I can fix it.

Cheers
Garth
 

A:Installing CD-RW in Compaq Presario

14 more replies
Answer Match 56.7%

I need to replace HD in my Compaq but I can't seem to get the plastic cover off front without forcing it. I am afraid I will break it. Any suggestions?
Thanks for your time.
Jerry L.
 

A:COMPAQ PRESARIO COVER

Well you didn't say it so I will ask. Are you sure the front cover has to come off. Most cases you just remove the screws on the back, remove the back metal shroud, and access the machine from there. A few cases have the front covers come off but the majority don't.
 

1 more replies
Answer Match 56.7%

I have a compaq presario 1650 laptop. It currently has a different language version of W98 installed. I want to format and reinstall the english version. The person I got the laptop from no longer has the compaq installation disk. Is it possible to format the harddrive and reinstall with the drivers that are located on compaq's site?
 

A:help with compaq presario 1650

As long as all the drivers are there, sure.

I've redone plenty of laptop machines. Just make sure the site has drivers for all the parts first, and get them all downloaded before you start.

------------------
Get free stuff and help out a poor computer tech:
LarryCore begs for money
 

1 more replies
Answer Match 56.7%

I'm trying to reformat my mom's old Compaq Presario SR1303WM. I've set it to boot from the cd-rom and I almost had it. But after deleting the partitions and starting a clean install it would only load the programs to 20%. After that it locked up and wouldn't do anything. I had to shut down and restart.

Now, it won't load from anything. Of course the old OS is gone so it won't start up on the hard drive and it won't boot from the cd. It just keeps going to a black screen with "Error Loading Operating System". Can someone please help me. I know they can't get a new computer and I just want to get a new install on this one to speed it up for them. They had a ton of malware and such on it.

Any help greatly appreciated.
 

A:Compaq Presario won't reformat

Since HP now owns Compaq, I am not sure what kind of cds you have in order to attempt recovery.
Per HP Support




HP computers that ship with Microsoft Windows XP do not come with recovery CDs. Instead, they use a hidden space (partition) on the hard drive to store the recovery information. The use of a separate partition provides a convenient process that eliminates the use of recovery discs that may be lost or scratched. A system recovery from the hard drive may not be possible in some circumstances. Your computer may contain Recovery Disc Creation software. Recovery discs for Windows XP are available from HP for a minimal cost. See Obtaining Recovery Discs for ordering information.Click to expand...

What kind of disk are you using to attempt restore, and are you using HP's support page?
Are you still set to boot from CD and to attempt to do so FIRST?
Is your BIOS properly identifying your hard drive?
What happens if you unplug the data cable from the hd before trying to boot to cd?
Do you have the "Recovery Console" option at some point during boot?
 

4 more replies
Answer Match 56.7%

Had to default my laptop now when it starts to load windows
says starting windows setup is preparing computor for first use
welcome message comes up then says windows could not complete installation,.to complete restart the installation
i press ok and goes over again starting windows
 

A:Compaq presario co61

What's the part/product number(P/N) on that Compaq Presario laptop?

You appear to have a CQ61 series model, so we need to confirm which one you have.
There should be a dash and additional characters after CQ61.

--------------------------------------------------------
 

2 more replies
Answer Match 56.7%

Hey all,
Does anybody know if all of the motherboards in the Presario V6000 laptop series are the same size and shape?

More specifically, does anybody know if a V6000 motherboard would fit in a V6310 case?

If you need more info, let me know.

Thanks!
 

More replies
Answer Match 56.7%

All of a sudden, my Compaq Presario, Windows XP, won't boot up past the black "COMPAQ" screen. None of the keyboard keys respond (we've tried three different keyboards). All the lights light up when we first turn on the computer, but then it just stops at the black screen with boot options, but none of the keys on the keyboard will do anything. Does anyone know what the problem might be?

A:Booting Up Compaq Presario

Have you tried booting into "Safe Mode" to see if its a software/driver issue?

4 more replies
Answer Match 56.7%

Hi All

I realise this is possibly not the right room for this, but here goes.

Compaq presario V5000 laptop started giving consistant BSOD on start up, no boot (even safemode possible)

*** STOP 0x000000c2 (0x00000043, 0xDFFE8000, 0x00000000, 0x00000000)

Ran linux did memory and hard drive check, seems ok. Have got all my data off and trying to recover the computer to a working state, but turns out the Compaq recovery DVDs i made invoke windows XP, this of course brings on the blue screen of im at the end of my tether.

Any suggestions, as I havn't got a scratch startable version of windows (as they don't give away them anymore.)


Thanks in advance.

A:Compaq presario recovery

Hi.
ok why can you use your restore cd to boot the the laptop with pressing F11 when booting the laptop,then follow the instruction.

N.B
i also have problem with mind i can not used it anymore because i have accident i lost my restore cd for compaq presario v5000.
can you please copy and send them via my e-mail,[email protected]
if you done mined.

1 more replies
Answer Match 56.7%

I have a compaq presario and that is in serious need of a new processer. The one I currently have is a cyrix M II-366 at 250mhz. I origenally had plans to overclock it but I feel it would be best to leave it be and buy a new processer. what I wanted to know is would I have to buy a new motherboard inorder to upgrade it to 1gig? By the way, you would'nt happen to know why it says 366 and runs at 250. All your help is greatly appreciated.
 

A:upgrading compaq presario

Look in your manual. Compaq has the upgrade path documented very well in it. I really doubt your FSB is at 250MHz tho
 

1 more replies
Answer Match 56.7%

I was trying to upgrade my brother's Compaq 5340 from Windows 98 to XP. I kept giving me errors on the C: drive but would continue to work in Win98. I moved the valuable files onto another drive and formated C:

Now I cannot install anything on drive C: . None of my Windows installationd discs with work with it.

It keeps saying that there is a compressed file or directory on the drive or that it is write protected.

I booted of A: drive with a Win98 startup disc but cannot access C: drive.

What Is going on? Did I screw something up?
 

A:Compaq Presario 5340

Boot off a floppy disk and FDISK the drive - remove all the partitions and then create a new Active/Primary partition. Also make sure that Antivirus/Bootector protection is off in the BIOS. Then boot off the XP cd and format the drive and do the install. To boot off the CD you need to set thej boot order to CD-ROM, A, HDD in the bios. You can also delete the partition from the XP cd if you boot off it.
 

2 more replies
Answer Match 56.7%

Hello all,

My 92-year-old grandfather -- who lives on a little island off the coast of Maine -- has emailed me regarding a problem that he is having with his ten-year old computer. If anyone out there would be kind enough to offer some advice on how to fix it, it would be greatly appreciated. There are no computer shops on the island, but my grandfather has plenty of tools and has worked extensively with radios throughout his life, so with some direction I have little doubt that he can make the repair.

This is an unconventional post, to be sure, and I don't really know anything about his computer ... but I think he has done a reasonable job describing the issue:

Hi Chris!
I have a severe computer trouble that I brought on myself.
First I will describe the computer and it's programs.
It is a Compaq, Presario 1200,
at least 10 yrs old.
Along the front edge of the top it has three indicator lights at the
left of center and three on the right.

The ones on the left are operating lights of which one shows when
the charger is in and the left most one shows when the computer is
started up by the button which is in front of the screen.
The one between these two shows the operating conditions, I believe,
as it usually flickers in concert with whatever is going on.
The three on the right each has a "locked padlock" symbol.
For programs it has Windows 98, Juno V.4, Intel Create and Share
and some other good things.
Everything has been working good.
I do... Read more

A:Compaq Presario Issue

What a sweet letter from "Grumpy Gramp"! Has he tried to plug in to another outlet completely? I would take the battery out completely and try this.

fyi: http://en.wikipedia.org/wiki/Compaq_Presario_1200
 

1 more replies
Answer Match 56.7%

I have an Compaq Presario 5724 that I FDisked and reloaded Win98 SE on. There are some components that are not working and I need drivers for. I have been to the Compaq site, but they have 2 or 3 different drivers for all the interfaces.
How can I find out which video, sound, modem are in the thing? Or, do I have to download all of the listed drivers and try them one at a time?
Thanks,
Dave
 

A:Compaq Presario 5724

16 more replies
Answer Match 56.7%

I hit the power button this morning and nothing happened. Tried unplugging and holding power button in and still nothing.
 

A:compaq presario will not turn on

Please post your system specs, exact model Presario, include any upgrades or modifications please.
 

1 more replies
Answer Match 56.7%

i have apresario 972 its old but good its just a pen. would like to update to a pen.3 or 4 the mother board is a compaq. thats about all i know about it.
 

A:compaq presario 972 how can i update it

Can't be done. It is probably some proprietary motherboard if it's a Pentium. If the motherboard is ATX you might....I said might be able to upgrade to a newer ATX motherboard. You will also need a new Power Supply, processor, memory and possible new graphics adapter.
 

1 more replies
Answer Match 56.7%

What type of my RAM is cheap but works good for my tyoe of computer. I have no idea what to buy. There are different seriall numbers on the RAM. I am preatty sure I need DDR RAM but is that it?? Let me know plz =) Thankies.
 

A:Compaq Presario 5304 RAM?????

16 more replies
Answer Match 56.7%

Appreciate some assistance.

Trying to help a friend with some computer issues. Doing it over the phone. He has a Compaq Presario EZ 2605 pc.

Anyone know of a website where there is an actual picture of what this type of PC looks like? Tried the Compaq site, but have not found a picture. Looking for a picture, and a manual, if possible.
 

A:Compaq Presario EZ 2605

Found a site with photos.

Please close post.
 

1 more replies
Answer Match 56.7%

Appreciate some assistance.

Anyone know how much memory the Compaq Presario EZ 2605 (out of the box) had?

Believe its processor is an Intel Celeron 633MHz.

Trying to help someone out who knows very litttle about computers and cannot tell me how much memory the pc has. (He does not understand how to look up the info in My Computer/Properties, etc.)

Asked Compaq a week ago, but still no answer.
 

A:Compaq Presario EZ 2605

Manufacturer Compaq
Model Presario EZ 2605
Maximum Memory 512MB
Standard Memory 64MB removable
Number of Slots 2 (2 banks of 1)
 

3 more replies
Answer Match 56.7%

i want to upgrade my computer so it can run windows xp and i'm not talking about minimum stuff i want to try and get da best out of windows xp, so wut should i upgrade?
 

A:Compaq Presario EZ2207

8 more replies
Answer Match 56.7%

Hello - I am attempting to get an old Compaq Presario 9546 that I obtained work correctly. I am, however, at a loss to figure out what the heck is wrong. When you boot the computer, it does the RAM check, and appears to skip past all BIOS functions (I can't go into BIOS setup... it does not exist) and then all it says is "Non system disk, please replace and press any key" - which, BTW, I have no disk in at all. When I DO put in a system floppy, it will boot from the floppy but not aqnowledge that anything else but the floppy is hooked up to the computer (I have 2 hard drives and a CD rom drive - all with the correct jumper settings). Any ideas? If I could just get BIOS to come up, I could probably fix it myself...
 

A:Compaq presario 9546 help

8 more replies
Answer Match 56.7%

i have a lap compaq presario v3417la i used win vista , then i move to win 7 ultimate , and disconect sound device , can you help me ? please

-[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]------------------------------------------------------------

Versión EVEREST v2.20.405/es
Sitio Web http://www.lavalys.com/
Tipo de informe Asistente de informes
Ordenador LUISGUZMAN-
Generador Luis Guzman
Sistema operativo Windows 7 Ultimate Media Center Edition 6.1.7601
Fecha 2011-08-19
Hora 12:59
--------[ Resumen ]-----------------------------------------------------------------------------------------------------

Ordenador:
Sistema operativo Windows 7 Ultimate Media Center Edition
Service Pack del Sistema Operativo Service Pack 1
DirectX 4.09.00.0904 (DirectX 9.0c)
Nombre del sistema LUISGUZMAN-
Nombre de usuario Luis Guzman

Placa base:
Tipo de procesador Mobile , 2000 MHz
Nombre de la Placa Base Wistron 30D6
Chipset de la Placa Base Desconocido
Memoria del Sistema 960 MB
Tipo de BIOS Phoenix (11/27/08)

Monitor:
Tarjeta gráfica GeForce 7150M / nForce 630M
Tarjeta gráfica GeForce 7150M / nForce 630M
Monitor Monitor PnP genérico [NoDB]

Almacenamiento:
Controlador IDE Controladora estándar PCI IDE de doble canal
Controlador IDE Controladora estándar PCI IDE de doble canal
Controlador IDE Ricoh Memory Stick Controller
Controlador IDE Ricoh MMC Host Controller
Controlador IDE Ricoh xD-Picture Card Controller
Disco duro WDC WD1600BEVS-60RST0 ATA Device
Lector óptico MAT... Read more

A:Compaq presario v3417la

Not too sure what you need help with.
Do you mean the sound does not work since upgrading to Windows 7?

This is because the existing audio driver is not compatible with Windows 7, and unfortunately HP/Compaq do not have any Windows 7 drivers for the Presario V3417LA. The Windows Vista driver might work. You can download it from here:
http://h10025.www1.hp.com/ewfrf/wc/...3&lc=en&cc=us&dlc=en&sw_lang=&product=3437668

Click the 'plus' symbol next to "Driver - Audio", then click "Connexant high-defintion audio driver".

If this driver does not work you will have to use Google Search to try and find one that does.
You really should have checked what drivers were available from the Compaq website before upgrading to Windows 7.
Some older laptops are just not suitable for upgrading to Windows 7 because of possible driver issues.
 

1 more replies
Answer Match 56.7%

My aunt has a compaq presario desktop pc and for a couple of months she turns on the computer and it takes like a half hour to get to the desktop then it goes really slow.it goes a little faster when i shut off some programs but still not at full speed.it should run fast it has a intel celeron processor 2.66ghz,256 mb ram but it is rather slow.she didnt have any problems with it when she first got it about a year and a half ago.any help will be appreciated.

thank you
 

A:problems with compaq presario

9 more replies
Answer Match 56.7%

my mother bought a compaq presario 5304 from a family member.when she got it,there was no system recovery disk for it.there was a disk that was for the 700's series.her computer will not detect the right drive because they used the wrong recovery disk for it.how do we get the computer to recognize and install its original drive.it was 56k.i am pretty much computer illiterate.john
[email protected]
 

A:compaq presario 5304

hmm system recovery. I'm not too big on using that. My overall suggestion would be go into dos at the startup and do a simpe C:/ format or is it the other way doh... Anyways at startup of windows press oh F8 I believe for systems with win 98 or higher but if you got win95 its either f5 or f8 or you can make a boot disk and do it that way.
 

1 more replies
Answer Match 56.7%

Hello. A buddy of mine has an old Compaq Presario 7470 that he is putting a new mobo in. Apparently, the old case has color-coded front panel wires. He has separated the wires and now he does not know which ones go where (in terms of going to reset button, power button, Etc). We have looked everywhere on the net for some sort of schematic for the Compaq case to figure out the color-coded wires. However, not even Compaq site has any info. Also, to note, the wires apparently terminate on some sort of small printed board before going to the lights and buttons. If anyone has any ideas I would appreciate your help.

Thank you,
LS
 

A:Compaq Presario 7470

The front panel wireing is one problem with trying to put a non Compaq board in a Compaq case . . the power supply may be another . . a lot of the OEM's use a proprietary Power supply with non standard connectors.

You might be able to Google Compaq Front Panel connectors to see if someone has worked it out ( i know of one guy who did for Dell )

He will almost certainly be better off buying a new case for the new board, and using whatever hardware he can with the new system.
 

3 more replies
Answer Match 56.7%

Have a Compaq Presario 1020 - laptop. Info is as follows -
Series 2900A
Model FBV1433VQL1J
Serial V644HZD50299

Need a maintenance manual. Any help would be appreciated. Thank you.
 

A:Compaq Presario LAPTOP

Google Compaq for a contact number - ask them to send you a manual..
 

1 more replies
Answer Match 56.7%

I bought a presario 1500 that I had assumed had a problem with green lines that were on the lcd and external monitor. The lady who owned it had taken it apart and sold it to me that way. I bought it today and tested it when I got home. I powered it on and I saw that the fan will move slightly but won't start and the hard drive will start but shuts down after about 5-10 seconds. The power light always stays on but nothing else. I noticed when I unplug the hard drive and battery inverter board(see link) it will shut off the power light. Could that be the problem? I don't see how the motherboard could break when it was never used. Anyone have some advise?

http://cgi.ebay.com/COMPAQ-PRESARIO...ameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting
 

A:Compaq presario won't turn on

This looks like a power supply controller card issue. Also some systems will not run if the CPU fan is not working. You need the battery inverter board in place to power the system and light the light.
 

23 more replies
Answer Match 56.7%

Just throwing this out in case someone can help

I have a Compaq Presario 5461 and when the hard drive crashed I got a new hard drive off ebay (same model the pc came with). When I try to use the compaq restore disk, i get an error that pretty much says restore can't be run on that machine. I realize that these restore disks are somehow keyed to the machine so you can't use them on another machine, but all the hardware is the same except for a little more memory. Only thing I can think of is a bios update that I applied. Did that alter the "signature" of the PC. If so, would it work if I backed of the bios update?

At this point the pc is just a toy, i'm using it to learn more about hardware, etc. I was able to install windows and just used my license key that came with the computer, so thats not an issue. But it bugs me that I can't get this restore to work. I did also notice that PC does not have an asset tag - wondering if the bios update zapped that.

Other notes - there was no extra partition that I know of on the orig hard drive, and there is only one restore CD (no diskette). I was able to do a restore of the pc several years ago
so I am pretty sure the disk is not defective.

Any help or thoughts would be appreciated
 

A:Compaq presario restore

a different hard drive than the one the pc came with shouldn't alter the restore process.
What error is it giving you?
 

4 more replies
Answer Match 56.7%

My Compaq M2000 Presario fan will not work. I have even bought a new fan and it still does not work. Is there a thermal switch on the motherboard that i could use to turn on the fan. Help is much apreciated.
 

A:Compaq M2000 Presario Fan Help

6 more replies
Answer Match 56.7%

My landlady's Compaq Presario SR1103WM is acting up and I'm pretty certain it is the PSU going out because the symptoms are the same as my PC had when it's PSU went belly up on me. It starts booting up fine until Windows XP Home starts loading, than it resets. I used a WinXP disk to repair the boot files and MBR with no effect, so we decided to reinstall Windows (been needing to do that anyway). Before doing that though, I was going to try recovering pictures of her grandkids by using a Linux Live CD, and ran into the same problem with it, so that eliminated Windows problems.

To the best of my knowledge, that leaves the PSU (likely) or the memory (possible) as the probable causes. I running Memtest86+ on it tonight to eliminate that cause.

Please correct me if I'm wrong in my diagnosis or if I am missing anything, but if I'm right about the PSU, that brings me to my main problem. I have heard that many Compaq models have proprietary PSUs so that you can't use off-the-shelf parts to replace them and have to buy one from them at a higher price. Is that the case with this model or can I order one from Newegg? I looked up the PC on Compaq's web site, and it didn't even say what PSU it has.

Thank you in advance.
 

A:Compaq Presario SR1103WM PSU

Memtest86+ has compleated 34 cycles with zero errors. Looks like it is the PSU.
 

1 more replies
Answer Match 56.7%

I bought this compaq presario 1800T from a garage sale and when I first turned it on it took at least 30min. for it to completely boot up and run fine. Cna some tell what to do for it to run faster. Also it has no memory chip and it runs on xp and was designed for ME or 2000.
Im also trying to get internet on it.
Please Help!
 

A:Need Help with compaq presario 1800T

how can it run with no memory? You will at least 1 gb of ram to run XP well. 512mb at the minimum to be acceptable.
Read the upgrading/troubleshooting ram guide in the guides forum before installing ram.

read the speeding up computers/system guide in the guides forum to see how to speed up your system. It is old, so bear in mind it really is only good for office work.

It has a built in telephone modem port and a LAN port for internet.
If you want to go WIFI (wireless) you need to buy a WIFI card for it.
 

1 more replies
Answer Match 56.7%

i have a question...a while ago my Presario battery died -- it wouldn't charge or discharge, the laptop could only work on the AC, but the indicator showed the correct % of the charge... I bought a new battery and it worked fine for a week, but I decided to reinstall Windows XP, and from then on, it's been a rollercoaster ride for me (( First, it worked fine, but the laptop started to freeze every 20 minutes. I followed the COmpaq's people advice and updated BIOS for some battery controller thing and updated the video driver. From then on, the problems with my new battery just started to overwhelm me First, the battery wouldn't charge when the laptop was ON. Then somehow it did charge. I decided to calibrate it, and now it doesnt want to charge -- on or off. The red light indicating the battery is flashing -- as it's not charging, and the indicator says "0" % of course.
Does anyone have any ideas?? Please? This only started after I reinstalled the Windows, so I am sure it's not hardware or the battery, everything worked just fine ((
Please help me!!!! Thanks... I'm desperate....
 

A:Compaq Presario 700 and battery

6 more replies
Answer Match 56.7%

Hi gang!
well it been awhile since i been here but at least i remembered where to go ..

Anyway here is my problem that I am stumped with ....

Reformated a compaq presario 2.1 gig/128ram/40gighd/ with onboard video and sound.
Everything is up and running fine except i cant seem to get the sound to work, says that it is installed and working properly but still doesnt work.
Installed different speakers ..no joy....went to compaq downloaded new software drivers and installed...no joy. Any ideas?

Thanks in advance
 

A:compaq presario no sound

I almost hate to ask if the volume control is set to mute so we'll pass on that one.

If there's a headset socket on the front of one of the CD's, can you hear anything through that?
 

2 more replies
Answer Match 56.7%

Is this computer any good if used for a bit of gaming, internet, work, CAD software? It is $700Cdn and include monitor, printer and speakers.
Also is it true that this computer with not come with discs of the software included, all the software is on the HD.

Processor
Intel ® Celeron ® D Processor 340
Operating System
Microsoft ® Windows ® XP Home Edition
Memory
512MB PC2700 DDR SDRAM memory (expandable to 2GB)
Hard Drive
80GB 7200 rpm Ultra DMA hard drive
Multimedia Drive
CD-RW 48x32x48x
DVD-ROM
DVD-ROM drive 16x max. speed with InterVideo WinDVD SE software
Video Graphics
Integrated Intel Extreme Graphics with up to 64MB shared video memory
Network Card
Integrated 10/100Base-T network interface
Sound
Integrated audio
Fax/Modem
High-speed 56K modem
Included Peripherals
Compaq keyboard
Compaq scroller mouse
Software
Digital entertainment
Apple iTunes for Windows: Digital music jukebox for importing music, organizing your collection and more
InterVideo WinDVD SE player: Play DVD movies
Sonic RecordNow: Burn music CDs and archive your data to CDs
RealPlayer: Find, play and organize digital programming - music, sports, entertainment, news and more more
Adobe Photoshop Album Starter Edition
WildTangent GameChannel: Preview 10 computer games

Productivity software
Microsoft ® Works 7.0: Includes a word processor, spreadsheet, database and calendar
Microsoft ® Office 2003 Trial: Get a 60-day trial version of Microsoft ® Office Student and Teacher Ed... Read more

A:Compaq Presario SR1220NX

I got mine on Oct 26,2004. So far i am very pleased with it. Not into gaming so I can't answer that question. I got $300 US rebates off the price.which brought the cost down .
Yes the software comes on the HD. There is a 'System Recovery " disk that comes with it but I'm not sure exactlly what that has on it..It does restore the orginal files that were on the computer when it came from the factory so it seems that should be all that is necessary to keep the computer running incase of problems.
 

1 more replies
Answer Match 56.7%

Its a presario 5000, i ran the belarc advisor tool to see what kind of memory i have, it said i have PC133, so i ordered some more, well, for the heck of it, i removed the memory in it to clean the board and the sticker on the factory memory says PC100!! so will PC133 memory still work with this thing even though it has PC100 in it now?
thanks!
 

A:compaq presario memory help..

7 more replies
Answer Match 56.7%

Hey fellas, Im currently trying to install XP on this box. Problem being, is im having a hard time getting the drivers for the mobo and such. I dont have the cd's and such for them either. The os in on there just fine and the network card and such work dandy, but i cant seem to get the USB ports enabled. I checked in the bios and i cant locate anything and im starting to worry.

Anyone got any help for me!
 

A:Compaq Presario 5600S

More specifically im looking for VIA vt82C598AT chipset drivers.
 

1 more replies
Answer Match 56.7%

i have a compaq presario 3630AS desktop. It came with quick restore CDs and a recovery CD. If i have to re-install win xp should i use quick restore CD or the other ????? Pls help

A:compaq presario 3630AS

Compaq Recovery CD options
The Compaq Recovery CD enables you to restore your system files from a separate partition on your hard drive. The four options on the Recovery CD are listed below.

Restore option Description
Emergency Diskette Creating this diskette is important as it allows you to save your computer's unique setup information for use in the event of an emergency. Store the diskette in a safe place.

User Backup Backs up all information and files on your hard drive and stores them in a separate partition on your drive.
User Restore Restores your hard drive to the state it was in when you last used User Backup.

Factory Restore Restores your computer to its original factory-installed software state.

1 more replies
Answer Match 56.7%

I am upgrading a Compaq Presario 5000 model #5WB220 with a very low 15 GB hard drive for a friend. It currently has Windows ME and there is no Compaq Restore CD.

I have increased the memory to 320 by adding an additional 256 MB RAM.

I am wanting to totally replace the 15GB hard drive with an 80 GB hard drive and load Windows XP Home.

The problem I am finding out is that Compaq has propriertory info on a partition within the existing drive. From what I understand without the Restore CD, I can't put the new drive in.

I'm wondering if there are any other alternatives to doing this.

Can I install XP on the existing drive and then transfer all the data (to include the compaq proprietory info) to the new drive in a slave position?
 

A:Upgrade Compaq Presario

10 more replies
Answer Match 56.7%

This is an older system. What manipulation of the case needs to be done to add / remove the hard drives?
 

A:Compaq Presario HD Installation

8 more replies
Answer Match 56.7%

My compaq was working fine until one day it just went off during a user session. Pushing the power button made it try to start but when it began to load windows 98 it quit again. After serveral retries it finally started up again. It ran OK for about one week , then just went off again. This was during a user session.(user session meaning it was in use at the time). I tried to restart it but it would not restart. Finally it tried to start, then said press F2, then the video went out. Nosthing shows up on the screen now. When powered on you can hear the hard drive start up but that's about it. The three year warantee lapsed about a year ago . I was wondering whether or not this has something to do with the cmos battery. Apparently several people I know who purchased a Compaq laptop have run into the same problem. I have a friend who owns an IBM thinkpad which has done precisely the same thing. Any suggestions.
Sincerely
Frank
 

A:Compaq presario 1200XL111

It is possible for the cmos battery to cause similiar problems, but from what you are saying it looks like a processor problem. For the system to just shut off in the middle of being used and unable to start up again, shows the possibility that the processor has overheated and the machine has powered off, however because the machine is still too hot it wouldnt fully start up again.
To say that your video has then gone, could mean the processor is completely knackered, signs of life can still be seen from the machine but nothing will appear on the screen, in most cases the monitor will stay on standby even when the machine is powered on.

I suggest a new processor, with new heatsinc and fan.
 

3 more replies
Answer Match 56.7%

I have a Compaq Presario C74EM which I just installed Win 8 RP. The sound did not work.

Eventually I was able to find and install drivers - sound still didn't work, but after following the advice on a forum post, I put the computer to sleep, waited a few minutes, woke it up, and sound now works.

This computer came with Win Vista home. Supposedly the Compaq Win7 drivers will work with Win8. Compaq (hp) has utilities that will go through any/all drivers, and update to the latest.

Does anyone know how to get this going under Win 8?

More replies
Answer Match 56.7%

i have a compaq presario SR5210NX with windows vista home premium ,it has a problem in/windows/system32/ntkrnlpa.exe,the state is 0xc0000225 and the information says the kernel doesnt responde or isnt working .it says introduce the installation disk windows ,but i dont have it and i couldnt enter to the recovery system

More replies
Answer Match 56.7%

Hey all,

I have this older Compaq Presario 7470 CPU, and I can't figure out how to open it. It doesn't have any buttons that pop open the chassis, or at least any that I can easily spot. I got a memory upgrade for it, and would like to put it in. Anyone know how to pop this thing open? Please email me or just reply here. Thanks!

Thanks,
Matt
 

A:Compaq Presario 7470

Here's a link to their site with instructions.
 

2 more replies
Answer Match 56.7%

I need to replace fried motherboard in this. I know it has 2.5ghz Intel Celeron processor. It also needs a new Hard Drive. The RAM is pc2700 ddr. Any suggestions on purchases?
 

A:Compaq Presario S4100NX

Need more info,

What socket is the CPU?

What is you power supply connection? 20 or 24 pin?
 

3 more replies
Answer Match 56.7%

hi,
I have a compaq Persario M2000. The other day, I was using the touch pad to move and it just shut off. I tried to turn it back on and nothing happens. When I look at the AC adaprter led it is not turned on and it is plugged in. I removed the battery and tried the same with no luck. the ac adapter led is still not light up. The battery is fully charged, and when i try just that nothing happens. I opened it up and removed the bios battery and checked the chips and circuits. nothing seems out of place ot burnt. I used a multi meter to check the power button and it is getting power, as well as the curcuits in the ac adapter
can someone help me or give me some ideas what my nxt step is?
thanks
 

A:Compaq Presario Will not turn on

I had similar problems with compaq laptops - it's the power supply in your laptop - the repair for that is about $300+

check your warranty before doing anything else...
 

2 more replies
Answer Match 56.7%

My Father in Law has a Compaq Presario 5900T. His Hard drive crashed and I put a new 160G drive in it. When I try to restore the computer with the original Compaq restoration CD's it keeps rebooting without ever formatting, partitioning or anything else.

Can someone help? My FIL is bound and determined to continue using this machine. I believe he is afraid of change.
 

A:Compaq Presario Restore?

you need the old hard drive

the quick restore disks that come with compaq computers only work with certainpartition and hard drive sizes
to get the 160 gb hard drive to work, you will have to reformat the old hard drive and install everything on it

then copy the drive c partition over to the 160gb hard drive then use a partition program to increase the drive c to 160 gb
 

1 more replies
Answer Match 56.7%

does anyone have or know where i can find the dip switch settings for a compaq presario 1930 laptop?
 

More replies
Answer Match 56.7%

I have a PIII 733mhz Compaq Presario 5900T that I need some help with.

1st thing is that my harddrive is broken and I am looking into getting a replacement for that, but my question is:

What kind of disks does this computer support?
I tried a 160gb samsung disk, but it hangs at compaq logo screen so I guess it's too big. (hoping to be able to change this through a bios update later)

2nd part is that when I found a matching disk, how will I restore bios on it? I have no restore cds left...and I suppose this computer stores a part of its bios on a hidden partition like all other compaqs.

The 384mb ram limit is fine with me since I am gonna run Linspire linux on it.

Anyone that can help? I tried Compaq support and got no help whatsoever.
 

More replies