Tech Problem Aggregator

Upgrading my Compaq Presario

Q: Upgrading my Compaq Presario

Right heres a very specific enquiry...

I have a Compaq Presario SR2125UK

Im looking to upgrade the graphics to a BFG 8800 GTS OC 320MB or the 640mb.

First question is can my processor handle it? (Intel Pentium D 915)

I know i have to upgrade the ram so im purchasing 4GB of DDR2 RAM for about £50 and im replacing the PSU probably with an OCZ Stealth 600W PSU. Do that sound viable? Ive only got 32bit windows so i know im loosing out on some ram but its a package deal lol.

I have tried reading into all the requirements for these upgrades such as power connectors from PSU to graphics card and motherboard and think i got a bit lost.

The BFG requires 12v of something which the OCZ provides along with more than enough power (425w required for BFG), plus both the motherboard and the PSU are PCI express compatible. And i have an extra slot to accommodate the doubledecked size of the BFG.

In terms of the required power connectors i was a bit lost. The OCZ said it has a 6/8 PCI express pin which is what the BFG requires but can somebody shed some light on this?

But im really just concerned that it was going to fit and work!

These purchases come to around about £150 so dont want to be thinking for another 100 squid i could have just bought a XBox 360! lol

Basically Im asking advise on the above upgrade decisions and any tips anyone has on installing these?

Any help would be appreciated, im sick of only being able to run pre-2005 games on a pc bought in 2007! I was pretty suckered in when i bought it (pc world claiming it had 512mb graphics, only to find it meant 256 dedicated and on a guff card aswell!) oh such a foolish lad in my youth!

A: Upgrading my Compaq Presario

16 more replies
Answer Match 81.06%

I have a compaq presario and that is in serious need of a new processer. The one I currently have is a cyrix M II-366 at 250mhz. I origenally had plans to overclock it but I feel it would be best to leave it be and buy a new processer. what I wanted to know is would I have to buy a new motherboard inorder to upgrade it to 1gig? By the way, you would'nt happen to know why it says 366 and runs at 250. All your help is greatly appreciated.
 

A:upgrading compaq presario

Look in your manual. Compaq has the upgrade path documented very well in it. I really doubt your FSB is at 250MHz tho
 

1 more replies
Answer Match 80.22%

Back in '98 or '99 for Christmas I got a shiny new Compaq Presario 4551. I guess it was pretty decent for light gaming back then, but I'm long overdue for an upgrade.

It came with an AMD K6-2 454 mhz processor. It has, onboard, 8 MB of video RAM, and an SiS video chipset, which is my PC's most major drawback. Correct me if I'm wrong, but I think this is either going to make me have to replace the whole motherboard just to get a new video card, or force me into some really tricky situation involving adding another more modern video card.

I have 3 sticks of RAM right now totalling 256 MB, and 2 hard drives: a 20 GB Quantam Fireball IDE, and a 160 GB Western Digital SATA attatched to a PCI controller. The only other upgrades I've made is a new monitor and a DVD burner which failed after 2 weeks with very light use.

Here is a detailed list of my PC's specs.

I can't play any modern PC games, and I'm stuck in the Pentium II era. I'm able to run things like Half-Life 1, the original Unreal Tournament (with medium detail settings in 320x240 resolution), Metal Gear Solid, Quake II, and SimCity 3000. A few things I've tried to play and can't without horrible slowness are Starsiege: Tribes, System Shock 2, The Sims, and generally any game that isn't made to run in 320x240.

I definitely want to upgrade my processor and video card more than anything. I'm pretty much happy with the rest of my system. I ha... Read more

A:Help Upgrading Old Compaq Presario 4551

You would be better off building a whole new system or buying a new system outright. Your money would be better spent, and you would be much happier in the long run
 

1 more replies
Answer Match 80.22%

Currently im wielding a Compaq Presario SR2125UK and I desperately need a graphics upgrade!
Unfortunately I need to upgrade everything else aswell to get a decent card. So my plans are upgrading the ram to 4GB and getting a new PSU.

Im all fine with the ram upgrades but what I want to know is what PSUs would be ideal for my older system and would still be good enough to run a BFG 8800GTS OC 320mb?
I know the wattage requirements for that particular card is 425w i believe, but a friend of mine said thats just the card so i need to make sure theres enough to run the other components of my pc.
Is there such thing as too much power? Im looking at 600w for around £60, that sound about right?

Also Im a bit lost when it comes to this ATX compatibility etc with PSUs, are most pretty generic and the chances are it will fit ok into my system? Most websites that give full details about my actual model are great for specs except when it comes to PSU compatibilty!

Any general upgrade advice regarding my particular pc model would be a tremendous help, so it would be much appreciated!

camy.
 

A:Advice on upgrading my Compaq Presario

OCZ StealthXtream 600W is good, it should be around 60 £.
The recommended power is actually for the whole system, not just the card, but it's always better to have a little extra, if for nothing else then for not to load the PSU at 100% (will last longer).
ATX is ATX, pretty much so. Some high wattage+high quality units are ATX 2.7 or 2.9 or whatever (basically just longer than 2.2, the today standard)

Anyways, on a budget, go for Radeon HD 4670 instead, it should be faster than the crippled version of 8800 GT, cheaper too, and you can get an IceQ cooled version to kick all the heat the card generates straight out of the case... I'll give you a link pair that I like to hand out for mid-range gaming graphics upgrade: http://www.overclockers.co.uk/showproduct.php?prodid=GX-103-HT&groupid=701&catid=56&subcat=1274 and... hey, wait what? PC Power & Cooling Silencer 500 W is not there anymore? well, let's get OCZ STX 600 W then... http://www.overclockers.co.uk/showproduct.php?prodid=CA-023-OC&groupid=701&catid=123&subcat=1098
 

3 more replies
Answer Match 80.22%

I am wondering what i need to upgrade in order to run Empire Total War as currently it starts to load and stops at around 50%. Would also like to know the cheapest graphics card I can get for my computer.

Minimum specs for ETW
2.4Ghz single core processor
256MB Gfx card (DX9 compaitble)
1GB RAM (For XP, 2GB if using Vista)
------------------
System Information
------------------
Time of this report: 3/13/2009, 19:25:19
Machine name: PIXEH
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.080814-1233)
Language: English (Regional Setting: English)
System Manufacturer: Compaq Presario 061
System Model: EK335AA-ABU SR1619UK GB540
BIOS: Phoenix - Award BIOS v6.00PG
Processor: AMD Athlon(tm) 64 Processor 3200+, MMX, 3DNow, ~2.0GHz
Memory: 958MB RAM
Page File: 788MB used, 1525MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
-------------... Read more

A:Compaq presario SR1000 upgrading to run ETW

Holy crap, I'm not reading all that! Anyway, it looks like your going to either have to overclock or get a new pc. Your CPU is to low and the minimum for this game really means MINIMUM!
Sorry
James
 

3 more replies
Answer Match 80.22%

Hi there, Im looking to upgrade my (HP) Compaq Presario CQ3430AN,Im planning to Upgrade the Power supply to an EVGA 550w GS 80+ power supply and then sticking a Zotac gtx 750 Ti in there, but i read on other forums that HP and such lock their BIOS so that you cant upgrade your systems? is this true? im really looking forward to upgrading and im just asking to make sure about this. Thanks in advance

More replies
Answer Match 79.38%

I have a Compaq Presario SR5413WM which according to HP I can upgrade the processor. I upgraded the RAM a couple of years ago, and the machine runs fine, but was curious to know if it was worth upgrading the processor.

My current processor is AMD Athlon LE-1640

Operating speed: Up to 2.7 GHz
Number of cores: 1
Socket: AM2
Bus speed: 2000 MT/s

according to HP I can upgrade it to
Socket type: AM2
Motherboard supports the following processor upgrades:

Athlon 64 up to 3800+
Athlon 64 X2 with Dual Core technology up to 4800+ (up to 65 watt TDP)
Sempron - All

I have copied this info from HP's website, and it really doesn't mean much to me, but was hoping that you guys could help!
 

A:Upgrading processor in a Compaq Presario SR5413WM

I would think that the difference is negligible depending on what you use the computer for.
 

4 more replies
Answer Match 79.38%

Looking to upgrade the processor on

COMPAQ PRESARIO SR5110NX

Currently has AMD ATHLON 64, 2.4 GH, SOCKET AM2
Trying to increase the speed,..I have the memory maxed out. Would one of these be compatable?

AMD Athlon 64 X2 6000+ Socket AM2 2x1MB Level 2 cache size ADA6000IAA6CZ

AMD Athlon 64 X2 6000 3.0GHz 2MB socket AM2 89W ADA6000IAA6CZ

AMD CPU Athlon 64 X2 6000+/3.0GHz/2M/AM2 940pin ADX6000IAA6CZ Dual core
COMPAQ says it can accept 64 X 2 Dual core up to 65 watts? DO these look workable, any other more realistic/cheaper approach on this upgrade...point the way.....what's a good way to go...
 

A:Solved: Upgrading Processor on COMPAQ Presario...which one?

16 more replies
Answer Match 79.38%

I bought this laptop which has AMD Turion processor and it comes with 512 mb RAM and Windows Vista OS. Wanted to upgrade the RAM and tried adding Kingston 1gb stick.
After installing the RAM and rebooting, i opened the windows explorer, I see that the window closing button (in red color) gets distorted. If i take the mouse over that button, the red color spills out of the boundary of that button. Generally some icons gets distorted.

If this is the problem with RAM what RAM can i use (Am planning to try using Transcend RAM also).
Or is it the problem with the operating system ?
Is it a good idea to continue using this RAM if the display issue is acceptable ?

thanks
Indra
 

A:Compaq presario - Windows vista - upgrading the RAM

It is kind of in the air. Could be the memory, you might want to check and make sure that it is the same speed ect. Or it could be vista. I personally wont buy vista for a couple more months, let them work the bugs out and make more compatible drivers for all my devices. That n it might get cheaper.
 

3 more replies
Answer Match 79.38%

I'm trying to upgrade the memory on a presario 7360, but the memory cards are blocked by the hard drive and the cd rom. The question is how do I remove the screws from the other side of the hard drive and cd rom to move them out of the way so that I can remove the memory cards. Thanks
 

A:Upgrading memory on compaq presario 7360

I am not familiar with the innards of one of these but it is common to have the drives on a subframe which comes out as 1 piece.
 

3 more replies
Answer Match 79.38%

Can I upgrade my RAM and GPU for this system ? Is there any limit to the upgrade ( Maximum ) that my desktop pc can support? If so what would be correct product to buy? Thank you, Ar.Jerome Benhur

More replies
Answer Match 79.38%

Hello folks my son inherited a Compaq Presario SR5210NX desktop which has basic came with it hardware. I want to upgrade his machine upgrade his memory add a graphics card and if possible add a better CPU . My question is since the mother board is generic I can not get any more specs except that the CPU slot is a socket 775 series socket for this machine. Which would be best CPU for his system and would not melt down his system ill post link to the site that had the best info below.

Compac Presario SR5210NX

Well I found motherboard specs but it has a few different CPU that can be used the question now is which would be the better one for gaming?

Mother Board Specs
 

A:Upgrading Compaq Presario SR5210NX desktop

8 more replies
Answer Match 79.38%

I have a compaq presario 5000, it has 64k memory in it right now, i checked my model number and all that at crucial.com, it says i have 3 banks of 1, so does that mean i can add one stick of 256 to the 64 in it now, or do i have to add it in pairs or do i have to remove the stick of 64 to add the stick of 256?
thanks!
 

A:upgrading memory on a compaq presario 5000

16 more replies
Answer Match 78.54%

I have a Geforce 8400 in my Compaq Presario SR5450F, but I'm a gamer of sorts and this video card doesn't work with a lot of the games I want to play. I was looking at the Geforce 9500, but it requires 350W and the power supply in my computer is only 250W. Is there any graphics card that will work in my computer for games such as The Sims 3 and Starcraft II? Could I get a new power supply that will support the Geforce 9500 AND fit in my computer? I was planning on getting the parts from Newegg.com if they'll even work. Thanks very much in advance for an input!
 

A:Upgrading a Compaq Presario SR5450F graphics card

The thing with companies like HP, Dell, etc. is their cases are designed so that they try to force the buyer to go through them for upgrades costing considerably more $.

Measure your power supply's dimensions and we'll take it from there. Also, make sure your motherboard can handle an upgrade to this card.

Can you link us to your system?
 

10 more replies
Answer Match 77.7%

Hey I really want to start playing Age of Conan but my computer is not up to par. I upgraded the video card, but I need to get memory and a new processor. I was wondering if anyone has any advice on hardware that will run this game nicely, but not break the bank too much. Thanks!

These are my specs:

System Manufacturer: Compaq-Presario
System Model: GX617AA-ABA SR5310F
Processor: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz (2 CPUs), ~1.6GHz
Memory: 1022MB RAM
Page File: 1199MB used, 1109MB available
DirectX Version: DirectX 10
 

A:I want to play Age Of Conan on my Compaq Presario SR5310F, Need Advice upgrading.

Wel, first and foremost, check the games system recommendations (which I am sure you have). Your processor speed should be suffecient but if you are looking to upgrade make sure it can handle it. There are programs that will run a diagnostic and give you upgradability information like SandraLite, even hijackthis. The same goes for RAM, it will operate at the slowest speed of one of your sticks.
 

1 more replies
Answer Match 65.1%

Hi, My Computer a Compaq Presario SR1810NX with Windows XP Home Edition SP2 is having an issue with it wont get past the Compaq Logo Screen, like, I press the power button the PC powers on, Fan Speeds up and then slows down as normal, keyboard lights flash as normal and the Compaq Logo along with the v3.48 and ESC = Boot Menu options appear on screen, the things is that it wont get past this screen, it just sits there at the Compaq screen, the keyboard and mouse dont seem to be interacting with the PC since I press ESC or F10 for boot mode or system recovery but the PC wont answer at all, I've already Disconnected power source unplugged mouse, keyboard all but PC is doing the same thing just sitting at the Compaq Logo Screen, the computer doesnt make any sound at all no beeps or anything, it wont let me access Windows at any time, recent installations well could be that I just installed a Mobile Bandwidth Card just a couple of weeks ago, and also just a few days ago I connected my iPod Shuffle 2nd Gen to the computer and the computer wont recognize it at all, not even charging, I know this might be a virus or malicious software, but my computer has barely connected to the internet in the last weeks (I couldn't pay the Internet and I had to use my friend's Mobile Bandwidth Card I mentioned before) all I did while in Internet with the Mobile Bandwidth was some schoolwork and youtube videos, I need help urgently with this since I have to deliver a very important proyect for scho... Read more

A:Compaq Presario SR1810NX Not Getting Past Compaq Logo Screen

Try a power drain.
1. Unplug power cord
2. Hold power button in for 60 seconds or more then let go
3. Plug in power cord
4. turn on the power and try to boot to setup (BIOS)

If it enters the BIOS then you should be able to just press F5 to reset to defaults and then F10 to save and exit. The PC should work now.

However, if after the power drain you still can not get in the BIOS than there is a MAJOR problem which would require some type of repair.

1 more replies
Answer Match 65.1%

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

1 more replies
Answer Match 64.26%

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

14 more replies
Answer Match 57.12%

I friend of mine purchased this Presario in 2004. She hasn't had internet since about 2006, so she hasn't had any of the updates since then. I brought her tower home with me since I have internet to load her updates. We're trying to get it internet ready. When I brought it home last week nothing would open. So yesterday she gave me the system recovery disc. I started with the Standard Recovery, but there were too many files that it couldn't recover. So I then decided to do a full recovery. After the full recovery it was rebooting and it told me that not all the system could reload and I couldn't hit okaybecause it wouldn't read / acknowledge my mouse. So, I unhooked her computer and rehooked mine to see what her alternatives were. I found a website, they wanted to know all the things it wouldn't oload. All I can remember is that it was things that could me downloaded later like: Norton, AOL, Adobe, MSN, and QuickTime.

So, I unhoked mine and rehooked her's up (and booted up my laptop). When her's came back up it's saying: NTLDR is missing Pres Control + Alt +Delete to Restart

My question for you is there anyway I can save her conputer? She doesn't have a lot of funds, being a singe mother of a 7 yr old and I'm just a good friend trying to help her out.

Thank you in advance for any help you can provide

A:Compaq Presario

I decided to see what happened when I ctrl alt delete and then decided to do another recovery. Here's some more info (could not recover errors):
1. C:\WINDOWS\Help\SB\Training\WXPPer\Content\Wave\[email protected]
2. C:\WINDOWS\System32\ntdll.dll
3. C:\WINDOWS\System32\ntkrnlpa.exe
4. C:\WINDOWS\32\dllcache\dinput8.dll
5. C:\Windows\systme32\dllcache\licdll.dll
6. C:\WINDOWS\system32\dllcache\locator.exe
7. C:\WINDOWS\system32\viaservc.dll
9. (Black screen instead of error message)
9. C:\WINDOWS\Installe152ec/msi
10. C:\WINDOWS\Installer\1b2cc.msi

then all of after about 20% a big blue screen with following:
A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. IF this screen appears again, follow these steps:

Check to make sure new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup... Read more

3 more replies
Answer Match 57.12%

ok when i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do. Thanks
 

A:Compaq presario help

16 more replies
Answer Match 57.12%

How do you open the casing on compaq presario 5304. I don't want to breakit.\

Thanks.
 

A:compaq presario

Link to tell you all about your computer. http://h10025.www1.hp.com/ewfrf/wc/...ry&tool=prodinfoCategory&dlc=en&product=93186
 

1 more replies
Answer Match 57.12%

I have a compaq presario. I have 2Gig memory. I changed services from ATT to comcast internet. now my pc needs to be wiped clean and set up again but when I got the computer I did not get the discs. how can I do this without discs> it wont open up the internet even though I am connected.

Please help
 

A:compaq presario pc

8 more replies
Answer Match 57.12%

ok I hace a compaq that is all messed up. lets see one day the monitor would not work after a storm. Bought another, For a while the screen would be blue but change back to normal. The pc also would have a hard time starting up after it was in idle. We would do a hard start and for a while that worked. Now when I try to start it it turns on but the monitor says no vga/dvi input. There is also none of the preverable beeps that are supposed to be there so in short (well long)the motherboard is fried? So do I use it as a planter in the yard or is there a way to get it up and running. It runs on XP media center it has a micro ATX form factor motherboard it is also an AMD 64 Anthlon. ram is 256 mb 1Rx16 pc 4200 ddr2 533 mhz. With all that said can I just replace the motherboard and reinstall the reinstallation disks and be up and running? ( if it could only be so easy) What about the cpu. i know many questions here thanks for patients. Please help me. Tina
 

A:compaq presario

does your system have agp or pciex (or even pci) slot free? Is the graphics on board? It sounds like a graphics card problem, even if it is onboard. I'd try a replacement card (even if it's just a pci card) and see what happens...
 

1 more replies
Answer Match 57.12%

sir, can u help me, i can't fint my driver for compaq presario v3760TU
previously, i used vista home basic but i convert to window seven.. but i can't find my driver in hp/compaq driver web.. plzz help me..
-sory for my english so bad..

A:compaq presario

Were you at this Hp/Compaq download page ?


Software & Driver Downloads Compaq Presario V3760TU Notebook PC - HP Customer Care (United States - English)&

6 more replies
Answer Match 57.12%

How do you access the Bios on a Compac Presario 4110. I keep getting the message 162 Sytems Options not set. 163 Time and Date not set. Having visited Compac they were not a lot of help. Downloading the software recommeded by them was a waste of time, still got the above message. Tried all the usual keystrokes etc no good. Any suggestions would be appreciated.
 

A:Compaq Presario

9 more replies
Answer Match 57.12%

my compaq presario cq57 says system disabled 62359871..plz help. thank you











Solved!
View Solution.

A:compaq presario

@sharp66? Enter   73031277

3 more replies
Answer Match 57.12%

I have purchased a Compaq Presario 600 with an Athlon XP 2200+ processor. I do not have a copy of Windows XP to wipe it with. Is there any way with the installed XP that I can refresh this system and remove data frome previous owners? Or Can I load Win 98?
 

A:Compaq Presario 600 ??

Compaqs usually have a hidden partition with all the factory loaded software on it in an image format. As long as it does and you can figure out how to access it you could probable do that - but you almost likely need the XP Product key and may need to reactivate XP after the recovery. XP can only be install on one machine at a time - so if they are still using it you are out of luck.

Watch the boot up for any recovery messages or take a trip to www.Compaq.com and look up the info for your make/model.
 

1 more replies
Answer Match 57.12%

Hi. Does anyone know if a Compaq Presario SR1150NX does the display system support component video (Y, Pr, Pb) signal output function? Thanks
 

More replies
Answer Match 56.7%

will not boot to windows- tried to reinstall xp will not boot to xp cd-continually goes back to screen saying last known config, boot normally or safe mode help please
 

A:compaq presario keeps rebooting in xp

7 more replies
Answer Match 56.7%

I need help I have a Compaq Presario R4010US Laptop. The keyboard does not work for some reason, I plugged an external usb keyboard into it and it works fine. Could the ribbon cable that goes from the keybd to the motherbd be bad?

Fwilli2

A:Compaq presario R4010US

hi Fwilli2 welcome to TSF,

take the keyboard off and re-seat the ribbon cable. you might want to try uninstalling the keyboard from device manager and then restart computer see if it work before you take keyboard out.

6 more replies
Answer Match 56.7%

hi,
I have a compaq Persario M2000. The other day, I was using the touch pad to move and it just shut off. I tried to turn it back on and nothing happens. When I look at the AC adaprter led it is not turned on and it is plugged in. I removed the battery and tried the same with no luck. the ac adapter led is still not light up. The battery is fully charged, and when i try just that nothing happens. I opened it up and removed the bios battery and checked the chips and circuits. nothing seems out of place ot burnt. I used a multi meter to check the power button and it is getting power, as well as the curcuits in the ac adapter
can someone help me or give me some ideas what my nxt step is?
thanks
 

A:Compaq Presario Will not turn on

I had similar problems with compaq laptops - it's the power supply in your laptop - the repair for that is about $300+

check your warranty before doing anything else...
 

2 more replies
Answer Match 56.7%
Answer Match 56.7%

I have a Compaq Presario C74EM which I just installed Win 8 RP. The sound did not work.

Eventually I was able to find and install drivers - sound still didn't work, but after following the advice on a forum post, I put the computer to sleep, waited a few minutes, woke it up, and sound now works.

This computer came with Win Vista home. Supposedly the Compaq Win7 drivers will work with Win8. Compaq (hp) has utilities that will go through any/all drivers, and update to the latest.

Does anyone know how to get this going under Win 8?

More replies
Answer Match 56.7%

computer will not charge only when it wants to. will not start up the power charge and wireless lights come on and the hdd light does not. black screen and the fan does work. computer was shut down and charged over night the next day it would not start up and screen is black.

A:compaq presario cq60

Without the battery installed and the power adapter plugged in, press and hold down the power button for 10 seconds. Plug in the adapter leave the battery out, does the laptop power up?

Do you get any repeated beeps? Does any fans spin or can you hear any fans running?

2 more replies
Answer Match 56.7%

i have a question...a while ago my Presario battery died -- it wouldn't charge or discharge, the laptop could only work on the AC, but the indicator showed the correct % of the charge... I bought a new battery and it worked fine for a week, but I decided to reinstall Windows XP, and from then on, it's been a rollercoaster ride for me (( First, it worked fine, but the laptop started to freeze every 20 minutes. I followed the COmpaq's people advice and updated BIOS for some battery controller thing and updated the video driver. From then on, the problems with my new battery just started to overwhelm me First, the battery wouldn't charge when the laptop was ON. Then somehow it did charge. I decided to calibrate it, and now it doesnt want to charge -- on or off. The red light indicating the battery is flashing -- as it's not charging, and the indicator says "0" % of course.
Does anyone have any ideas?? Please? This only started after I reinstalled the Windows, so I am sure it's not hardware or the battery, everything worked just fine ((
Please help me!!!! Thanks... I'm desperate....
 

A:Compaq Presario 700 and battery

6 more replies
Answer Match 56.7%

Hello Everyone,

I am running Windows XP Pro on a HP Compaq Presario S3190UK desktop and since this evening I haven't been able to even get to the Windows Splash screen.

When I boot I am given the options of Safe Mode, Last Known Good Configuration, Start Windows Normally and Recovery Mode (which doesn't respond). Whichever option I select it stalls and will not boot the files and when I boot in safe mode it stalls after about seven seconds.

I have the Operating CD which I have tried to boot from but upon boot up I get the message "Please insert the Restore Plus! CD" . I don't have this.

Is there any chance of me retrieving my data?

Thanks for your help in advance.
 

A:Restore Plus! CD for HP Compaq Presario

16 more replies
Answer Match 56.7%

hello recently my pc has been failing to start up and asking to go to the start up repair my pc is fine but will this lead to future problems

thanks ~shadow

A:compaq presario cq60 help

Hi and Welcome to TSF!

What did startup repair find?

Do you have your Windows cd?

2 more replies
Answer Match 56.7%

i have a lap compaq presario v3417la i used win vista , then i move to win 7 ultimate , and disconect sound device , can you help me ? please

-[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]------------------------------------------------------------

Versión EVEREST v2.20.405/es
Sitio Web http://www.lavalys.com/
Tipo de informe Asistente de informes
Ordenador LUISGUZMAN-
Generador Luis Guzman
Sistema operativo Windows 7 Ultimate Media Center Edition 6.1.7601
Fecha 2011-08-19
Hora 12:59
--------[ Resumen ]-----------------------------------------------------------------------------------------------------

Ordenador:
Sistema operativo Windows 7 Ultimate Media Center Edition
Service Pack del Sistema Operativo Service Pack 1
DirectX 4.09.00.0904 (DirectX 9.0c)
Nombre del sistema LUISGUZMAN-
Nombre de usuario Luis Guzman

Placa base:
Tipo de procesador Mobile , 2000 MHz
Nombre de la Placa Base Wistron 30D6
Chipset de la Placa Base Desconocido
Memoria del Sistema 960 MB
Tipo de BIOS Phoenix (11/27/08)

Monitor:
Tarjeta gráfica GeForce 7150M / nForce 630M
Tarjeta gráfica GeForce 7150M / nForce 630M
Monitor Monitor PnP genérico [NoDB]

Almacenamiento:
Controlador IDE Controladora estándar PCI IDE de doble canal
Controlador IDE Controladora estándar PCI IDE de doble canal
Controlador IDE Ricoh Memory Stick Controller
Controlador IDE Ricoh MMC Host Controller
Controlador IDE Ricoh xD-Picture Card Controller
Disco duro WDC WD1600BEVS-60RST0 ATA Device
Lector óptico MAT... Read more

A:Compaq presario v3417la

Not too sure what you need help with.
Do you mean the sound does not work since upgrading to Windows 7?

This is because the existing audio driver is not compatible with Windows 7, and unfortunately HP/Compaq do not have any Windows 7 drivers for the Presario V3417LA. The Windows Vista driver might work. You can download it from here:
http://h10025.www1.hp.com/ewfrf/wc/...3&lc=en&cc=us&dlc=en&sw_lang=&product=3437668

Click the 'plus' symbol next to "Driver - Audio", then click "Connexant high-defintion audio driver".

If this driver does not work you will have to use Google Search to try and find one that does.
You really should have checked what drivers were available from the Compaq website before upgrading to Windows 7.
Some older laptops are just not suitable for upgrading to Windows 7 because of possible driver issues.
 

1 more replies
Answer Match 56.7%

I have a Compaq Presario 7588
serial number: 8011dcw41090
With Pentium III 550Mhz processor I hear that I can up grade the processor to 1100 Mhz but I still need some information a bout the processor like the type of socket and the cache memory and if I can just buy a processor and install it normally without contacting Compaq service
 

A:compaq presario 7588

You'd probably need a Socket 370. I don't think the Tualatin based P3's would work for you. They are the ones with 512k L2 cache. You'd need a regular Coppermine based P3. (256k L2)
 

2 more replies
Answer Match 56.7%

I just bought and set up a new computer system, and am now trying to get my old one to boot, so that I can migrate the files needed for the new system. The monitor doesn't come on, and all I'm getting is a fast blinking green light on the tower. I've un/replugged all cables and power cords, and I know the monitor is OK because it belongs to my husband's matching computer, but my old one won't boot.

Help!!!
 

A:Compaq Presario won't boot!

I'm desperate, guys! Is there any other information I can give you to help resolve my problem? I have the Easy Transfer Cable for Vista all ready to go (and the software loaded in the old computer before I disconnected it and moved it to the card table), but I can't get my Compaq to boot.

If you can't help me, I guess I'll take it to Best Buy tomorrow and let the Geek Squad have at it...
 

3 more replies
Answer Match 56.7%

Hello! I am attempting to change a 80mm fan in my Compaq computer. The fan I want to change is, I believe, called the CPU fan. It has a lever next to it and 4 screws holding it down. My question is this: Do I have to move the lever on the side of the fan in order to pull the fan up and proceed to remove the screws or do I just remove the 4 screws?  Also, how do I remove the screws considering the awkward position they are in? (I've been working on trying to remove the screws; however, it is difficult to maneuver the screwdriver into the top of the screws to remove them. This is because part of the fan case is above the screws making it necessary to place the screwdriver sideways in order to remove the screws.) Thank you for your response.  

More replies
Answer Match 56.7%

hi everyone my best freind has a compaq presario sr2170nx and ever scince they've had it it would mak a loud noise for hours "like it was dieing and gasping for air" and then it became really slow and would freeze, but now it's to the point it just shuts off. now i think the fan went and the computer just keeps over heating but im haveing and extremy hard time finding the fan that gos to this computer. can anyone help and if u think it's something else pease let me know thank you
 

More replies
Answer Match 56.7%

Got a compaq presario 3060 US. Operating system XP Pro. ATI Radeon Graphics and Soundmax sound card. Plugged head phones into it and sound stopped working with or without headphones plugged in. Reloaded XP Pro Now no sound at all. JBL speakers. Any ideas or similar experiences?
 

A:Problems with Compaq Presario

If you've done a fresh install of Windows XP Professional you will need to also install the audio drivers.

They're available from the support section of Compaq's website. Head to the support area and enter your model details to be shown the correct drivers.
 

5 more replies
Answer Match 56.7%

System simply freezes. Compaq Presario 5000, running XP. Latest Windows updates already applied. Any ideas???
 

A:Compaq Presario won't go into Standby

6 more replies
Answer Match 56.7%

I need to replace fried motherboard in this. I know it has 2.5ghz Intel Celeron processor. It also needs a new Hard Drive. The RAM is pc2700 ddr. Any suggestions on purchases?
 

A:Compaq Presario S4100NX

Need more info,

What socket is the CPU?

What is you power supply connection? 20 or 24 pin?
 

3 more replies
Answer Match 56.7%

Hi Guys,

I am trying to install a Cyberdrive x16x12x40 CD-RW into a Compaq Presario 5000 series PC. If no other device is attached to either the IDE or to the power supply, and if the CD-RW isn't attached to the IDE then power will get to the CD-RW. If the CD-RW is attached to the IDE and/or any other device is attached then no power goes to the CD-RW.

Can anyone shed any light on why this is and how I can fix it.

Cheers
Garth
 

A:Installing CD-RW in Compaq Presario

14 more replies
Answer Match 56.7%

I have a problem with my laptop screen. The screen is dark, however, the data is still there. Can't turn lamp on, or change anything, but can hook up to a monitor and it works. Can I fix the screen to work again? If I hit the button that turns the screen off and closes the computer down, the picture pops up for a few seconds and it is slightly red.
 

A:Compaq presario R3000

Its most likely that the backlight has failed. It can be fixes but it costs a upwards of $100 to do by a professional. You could try buying the parts online and doing it yourself though if you are technically inclined.

Here's how: http://www.laptoprepair101.com/laptop/2007/12/09/replace-laptop-backlight-ccfl-lamp/
 

1 more replies
Answer Match 56.7%

Hi this is my first post so bare with me.

I have a compaq presario 2580us laptop first of all with a pentium 4 in it.

My question is this. My laptop has 3 fans in it and they all used to come on in the past. Only one(the biggest) has been working not sure how long it has just been the one either. My temps get up to around 127F. I am just just wondering if there is a way to check out why the other 2 fans are not working. If there is some setting that I could check that would be great. Any assistance would be so nice.

Thank you,

Jackie
 

A:Compaq Presario Fans

I did this on a machine at work 2 weeks ago. Check hp.com, do the auto detect thing, and update the bios. should solve the problem.

hope it helps.
 

9 more replies
Answer Match 56.7%

Hello sir, I have a problem in bios password. I tried to reset cmos by removing rtc battery. But i can't remove password. System disabled code is 07437. Thanks, MNKTags:Microsoft Windows 7 (32-bit)Presario V3000

A:Compaq presario v3000

@Ulies? Enter   zyaztrq    or    alqelqe REO

1 more replies
Answer Match 56.7%

Installed with Vista Premium, i've realised that it has a Recovery Partition and im not sure how to use it. my computer came with a windows vista disc, but im trying to recover Vista and im not sure how to do it. maybe someone can give me a heads up on how to do it.
 

More replies
Answer Match 56.7%

I was trying to upgrade my brother's Compaq 5340 from Windows 98 to XP. I kept giving me errors on the C: drive but would continue to work in Win98. I moved the valuable files onto another drive and formated C:

Now I cannot install anything on drive C: . None of my Windows installationd discs with work with it.

It keeps saying that there is a compressed file or directory on the drive or that it is write protected.

I booted of A: drive with a Win98 startup disc but cannot access C: drive.

What Is going on? Did I screw something up?
 

A:Compaq Presario 5340

Boot off a floppy disk and FDISK the drive - remove all the partitions and then create a new Active/Primary partition. Also make sure that Antivirus/Bootector protection is off in the BIOS. Then boot off the XP cd and format the drive and do the install. To boot off the CD you need to set thej boot order to CD-ROM, A, HDD in the bios. You can also delete the partition from the XP cd if you boot off it.
 

2 more replies
Answer Match 56.7%

A mate of mine has just bought himself a Compaq Presario and asked me to give him a hand at getting it up & running so I said I would, (really a classic case of the blind leading the blind). We did get the thing going & connected to ISP so miracles do happen. What I would like to know more about is the partitioned HD that it has. Am I right in thinking it is a backup of some sort.
 

A:Compaq Presario HD Partition

8 more replies
Answer Match 56.7%

Hey everyone I am having the same problem again as I was having before with my Compaq Presario 5000. It seems to just freeze up when I am on it or not. Sometimes I try to move the mouse to get back into Windows from the screen saver and it does nothing. At all! And sometimes in the middle of surfing the web and listening to music it just freezes up again and I have to hit the power button just to get it back up and running. Can anyone help out with this? I was asked to run MemTest before but I have no idea how to do this, so could someone help out? Also, since I am not a complete newbie, but darn close when it comes to the whole hardware side of computing, how can I tell what is causing interference with what when it comes to the hardware I am running and wether or not the latest drivers are installed? Thanks again and hope to get this resolved quickly.

Compaq Presario 5000
UWAVE Motherboard
832MB RAM
AMD Athlon 901Mhz
eVga GeForce2 mx 400 64MB PCI
Sound Blaster Audigy 2 ZS Platinum
Sony DRU-530 DVD +-Drive
Windows XP Home SP1
 

A:Compaq Presario Freezing up again!

13 more replies
Answer Match 56.7%

Ive been wanting to get my old computer running for awhile. i took it in, to get checked, and the guy said that the hard drive was blown. He told me that i had to get the full quick restore disc set if i wanted to put a new hard drive in to get it working(he said it consisted of 2 discs, he explainted to me why but it went in 1 ear and out the other). Well i called and told them that i need a full quick restore disc set for the model number 5170. I got it in the mail today but there is only 1 disc . Is there really 2 quick restore discs or did that guy have no idea what he was talking about? Also can i just use the 1 quick restor disc to put in a new hard drive and get my comp running again?
 

A:compaq presario quickrestore cd

8 more replies
Answer Match 56.7%

My sister is having major problems with her Compaq Presario CQ57 (running Windows 7). I have been trying to help her with it but, I am about to literally throw it from a very high window. I'm thinking it has a malicious program lerking inside it. I am trying to get it into safe mode and am having a hell of a time. I want to do a scan on it and I believe it is better to be i safe mode.

There is no F8 option so that is out. I tried msconfig and computer says it can't find the file,(by the way it says that to any program I try to install). Since I can't get anything to install and everything I seem to try hits a brick wall I am at a lost on what to do. Every time someone gives me some advice on how to maybe fix this I can't seem to get past the first step!!!HELP!!!! She has only had the computer for a couple of months. This is her first brand new computer and it seems she has made a very bad choice!

The Wireless has already quit working too! Buyer Beware!!! Please can someone please help me out?? I am desperate.

A:Compaq Presario CQ57

How about booting to recovery partition if available to restore to factory condition or system restore?

2 more replies
Answer Match 56.7%

Hi

After unsucessfully trying to get rid of some nasty Malware (Antivirus XP Pro 2009 to be precise) I'm currently trying to perform a factory reset on my Compaq Presario SR1909uk which had Windows XP.

I'm performing this from the recovery discs I created when I bought the PC.
However, I keep getting various error messages saying either

'Cannot copy file C:\1386\APPS\APPS15417\src\VIRUSCAN7.DAT or

C:\1386\APPS\APPS15417\src\Setup\asCore\Antispam\btevclid.dll\MANIFEST\asnmobj.spm

I keep aborting when I get these messages and the progress perecetage remains. If I do this until I reach 100% do you think it will work?

Other than buying some new recovey discs from Compaq or taking it to be fixed, are there any alternatives please?

Thanks

A:Compaq Presario SR1909uk with XP

Try cleaning your Recovery disc.

3 more replies
Answer Match 56.7%

Hello,
I have recently upgrade my OS from Vista to Windows 7 Ultimate by clean install method.
I think so far everything works except microphone which I solved by installing updates from windows update.
So my question is, Should I install some drivers or some updates from either compaq or hp sites or wherever also? Should I try to find drivers specefic for my computer or go with the drivers which came with windows 7?
My computer model is: Compaq Presario CQ61

Thank you very much!!!

A:Compaq Presario cq61

  
Quote: Originally Posted by jav


Hello,
I have recently upgrade my OS from Vista to Windows 7 Ultimate by clean install method.
I think so far everything works except microphone which I solved by installing updates from windows update.
So my question is, Should I install some drivers or some updates from either compaq or hp sites or wherever also? Should I try to find drivers specefic for my computer or go with the drivers which came with windows 7?
My computer model is: Compaq Presario CQ61

Thank you very much!!!



If HP/Compaq have the drivers for your PC, then yes.

4 more replies
Answer Match 56.7%

Hi Everyone, I am new to this site and really need your help. I have a compaq presario desktop sr1725an and I need to run a complete recovery on the system. I have tried everything the hp site tells me, but so far nothing works. I really need recovery discs for this computer, it currently has xp loaded. Does anyone know where I can download recovery disks for this computer, I want to restore it to its factory settings.

Please, any help would be great.

Thanks!
 

A:Compaq presario sr1725an

7 more replies
Answer Match 56.7%

i have recently formatted my hard drive and reinstalled xp home, i have found all the necessary drivers etc but unable to use my mouse, on the device manager a yellow icon appears stating unknown device, iv searched everywhere for drivers etc but all came blank, i went to the compaq site and downloaded the mouse/keyboard driver from there but then got an error stating unable to find version of runtime to run this application '' iv downloaded the most recent .NET framework and still nothing, iv searched for more help but unable to find any results, anyone got any pointers if im doing something wrong ?

A:compaq presario S5600UK

What is the make and model # of your mouse?
In Device Manager, right click the Unknown Device and Uninstall it. Now remove the USB cable for the mouse from the computer end. And restart the computer. When the computer comes back up, plug in the mouse into the Back USB port of the computer and not the front or through a hub as these ports are weaker. It should install. if not, go to the mouse manufacturers support download drivers site and type in your model # and download the driver.

1 more replies
Answer Match 56.7%

I was not sure just where this question should go so if this is not the right place please feel free to relocate it.

I have THIS desk-top:

Hewlett-Packard Compaq Presario CQ2723wPC
Windows 7 Home Premium 64 Bit
AMD EI-1200 Accelerated Processor
Memory = 4GB/G(something I can't make out) DDR
HardDrive = 500GB/
I am running a PPS PE9 photo effects program that is only working about 50%

I have found the minimum requirements for running this particular program:

Open GL 2.0 capable video card with 256MB dedicated RAM
Memory 8GB+

How do I find out what kind/size of video card, how much dedicated RAM, and available memory my unit has ?

If my unit is falling short in any of these requirements, is this something I can buy and is it within my abilities to make the necessary improvements ?

I am quite mechanically/electrically adept but I know little about the insides of a computer.

Thanks for reading.
 

A:Compaq Presario Particulars ???

The Compaq Presario CQ2723w Desktop PC(H2L89AA) comes with Windows 7 Home Premium SP1 64-bit and comes with this hardware:
Pegatron APXD1-DM(Redwood A) motherboard
AMD E1-1200 APU 1.40 GHz dual core processor which has an average benchmark score of 682
4 GB of DDR3-1333 RAM
Intel Radeon HD 7310 graphics which has an average benchmark score of 171
Realtek ALC662 high definition audio
Atheros AR8152 10/100 Mbps ethernet
500 GB SATA hard drive
Super-multi DVD burner disc drive
65 watt power supply

If you wanted a desktop that's speedy and has plenty of hardware upgrade options, you couldn't have picked one much worse than this one.
Its motherboard has no expansion slot for adding a graphics card, so you're stick with its wimpy integrated graphics which uses up to 1961 MB of shared memory.
Its slow wimpy processor is soldered to the motherboard and not upgradeable to a faster one.
It has only 4 GB of RAM, but it supports 8 GB, so you do have the option of adding more.

----------------------------------------------------------------
 

1 more replies
Answer Match 56.7%

I have an old compa presario 1277 who supposedly had something called a monkey virus on it. This virus supposedly wipped out all the drivers. Someone reistalled them. However, my husband insist the monitor display does not look like it did and that it use to play movies. Do you have any suggestions?
 

A:Compaq Presario 1277

Is it this Presario 1277 notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=95012& ?

If so try reinstalling the Trident Display Driver from the available downloads.
 

1 more replies
Answer Match 56.7%

My friend bought a new computer the other day without asking me for my opinion. I was wondering if he could put a better vid card in it. If so is it AGP 4x or 8x or no agp at all. THANX a bunch.
 

A:AGP on Compaq Presario SR1224NX

This doent help dude post system spec so that we can tell whether he can go for a AGP/PCIe or whatever his options are.
 

4 more replies
Answer Match 56.7%

ok the dilemma is simple ok i bought this new laptop for the wife then it came with a built in webcam truth is i don't want that webcam so i bought another webcam that i am trying to use on msn but the laptop states found new hardware but doesn't install my webcam is usb ported it says m style on the cam the only thing it uses my wife states that she can access the cam thru the control panel but not in msn why is this occuring if someone could get to me asap would be greatly appreciated thanks in advance
 

A:Ok new laptop compaq presario

You may need to disable the original webcam

You can disable it by going to: Device Manager (Start->Run-> Devmgmt.msc)

Then locating your Webcam (that you don't want to use) and then right click on it and select disable

Then go back to MSN and use the settings to set up the new webcam
 

1 more replies
Answer Match 56.7%

I have a compaq presario 7470 in my possession. It used to work, but not for some reason it refuses to. I just bought a power supply for it and it still doesnt work. I figured out that if u remove the J3 pin from pins 2 and 3 after pressing the power button it will turn on. The compaq screen comes up and it says '102-System Board Failure.' This seems bad...what should i do? is it a fried motherboard? if the board was fried would it even turn on?? Thanks!
 

A:Compaq Presario 7470

I don't think the motherboard is fried in which case it wouldn't boot, as you say. But it definitly is having some problems...

Has Compaq support service gotten back with you yet ?
 

11 more replies
Answer Match 56.7%

Okay. At work I have 2 Compaq Presario PC's. One is model SR1010NX and the other is S5010NX. They're fairly old. I have a Ubuntu 10.04 server set up that acts as my DHCP/TFTP/Samba server for booting with PXE, then installing the selected system and my custom application suite using only literally 2 minutes of my time to type in such details as the CD Key, Computer Name, etc.

So anyway, back to my Presario problems. Both computer conveniently do not have a Network Boot ROM (for example nVidia Boot Agent). So if I try to boot from network, Ill get a "Disc Failure". The S5010NX will not boot with a USB drive plugged-in period. It will get stuck on the red "Compaq" screen. If I unplug the device, it boots into BIOS/OS perfectly fine. If Im in the BIOS, and I plug the device in, the BIOS turns non-responsive, when I remove it, it starts responding again. Weird.

Here the 2nd chat session I've had with HP Professional Support (or whatever it's called). All I have to say is, I knew more about computers when I was 12 then these guys do.





Print active chat
[Tuesday, September 07, 2010 5:44 PM] -- Automatically generated message:
A support specialist will be with you shortly.
[Tuesday, September 07, 2010 5:44 PM] -- Automatically generated message:
You are now chatting with support specialist Priya K.
[Tuesday, September 07, 2010 5:44 PM] -- Priya K says:
Welcome to HP Total Care for Desktops. My name is Priya. Please... Read more

A:Compaq Presario headaches

Whoa! You're using this dinosaur? o_o
 

2 more replies
Answer Match 56.7%

I have a compaq presario c300 notbook. It will not boot. I get the compaq screen, then nothing. It will not boot to the cd either. The backlight comes on, so it's not that. Please help. I'm lost.

A:compaq presario c300

Welcome to TSF....

To get it to boot from the cd you have to change the boot order in BIOS. This can be done during boot up when you can open the BIOS and set it.

The cd you used is it the recovery cd for the computer?

1 more replies
Answer Match 56.7%

I am not near this machine, it's 60 miles away, so I can't look myself, but can anyone tell me if this is one of those pieces of junk that has the BIOS on the Hard Drive, or is it on the Mobo (like normal) ?

The person wants me to rebuild it, and I have never rebuilt a PC that has the BIOS on the HD.

What do I need to watch out for ?

What I usually do is FDISK the HD and then Format it, and go from there.........

Compaq Presario 7470
 

A:Compaq Presario 7470

I believe its a normal setup. However, even if its not the compaq partition is hidden. It is either completely invisible to FDISK or its listed under Non-DOS partitions in FDISK. As long as you don't touch that you'll be just fine.
 

2 more replies
Answer Match 56.7%

i have a compaq presario SR5210NX with windows vista home premium ,it has a problem in/windows/system32/ntkrnlpa.exe,the state is 0xc0000225 and the information says the kernel doesnt responde or isnt working .it says introduce the installation disk windows ,but i dont have it and i couldnt enter to the recovery system

More replies
Answer Match 56.7%

presario 1270, win se (non compaq) os, lcd went dim over 2 weeks and then dark while i was still running compaq 98 os. works well on external crt and current os. lcd is working but too dark to use. suspect inverter? or some other problem with backlighting. any suggestions to diagnose or repair would be appreciated. D.Rees
 

A:compaq presario mod #1456vqlin lcd

Backlight is out no doubt, screen look fine with flash light held up to it? Not much you can do for that, doubtful you can replace that unless you are pretty seriously technical.
 

1 more replies
Answer Match 56.7%

My compaq was working fine until one day it just went off during a user session. Pushing the power button made it try to start but when it began to load windows 98 it quit again. After serveral retries it finally started up again. It ran OK for about one week , then just went off again. This was during a user session.(user session meaning it was in use at the time). I tried to restart it but it would not restart. Finally it tried to start, then said press F2, then the video went out. Nosthing shows up on the screen now. When powered on you can hear the hard drive start up but that's about it. The three year warantee lapsed about a year ago . I was wondering whether or not this has something to do with the cmos battery. Apparently several people I know who purchased a Compaq laptop have run into the same problem. I have a friend who owns an IBM thinkpad which has done precisely the same thing. Any suggestions.
Sincerely
Frank
 

A:Compaq presario 1200XL111

It is possible for the cmos battery to cause similiar problems, but from what you are saying it looks like a processor problem. For the system to just shut off in the middle of being used and unable to start up again, shows the possibility that the processor has overheated and the machine has powered off, however because the machine is still too hot it wouldnt fully start up again.
To say that your video has then gone, could mean the processor is completely knackered, signs of life can still be seen from the machine but nothing will appear on the screen, in most cases the monitor will stay on standby even when the machine is powered on.

I suggest a new processor, with new heatsinc and fan.
 

3 more replies
Answer Match 56.7%

A friend has a Presario X1300. It has a small problem. The power button only works once in a while (perhaps 1 in 20 presses). I thought perhaps it was a cold solder joint but even after touching up the button's pads its still has the problem.

It could be a bad switch, it looked like the switch had previously been replaced (although he hasn't had it serviced except to put in a new hard drive about a month before the switch went bad).

I found a post that indicated that someone found schematics for the motherboard and I was hoping that someone here would be able to point me in the right direction. I didn't find them on google. I'm going to replace the switch first, but if that doesn't work I have to assume there's some other problem that will need debugged.

I hate to see such a nice laptop go to waste because of a stupid power on problem.

I have found the service manual online. Its great, but has no schematics.

Thanks for any ideas you can offer.

Raydude
 

More replies
Answer Match 56.7%

I have a f560US AMD Sempron 3500+ 2.8 GHz 1.5 GB Ram 32 bit and I am trying to boot to Linux from a USB thumb drive. I installed Ubuntu using Unetbootin on my 8 GB stick but I can't seem to make this laptop boot from the USB. I've gone into the bios and tried but have failed. Help me, please.
 

A:Compaq Presario won't boot from USB

Does your laptop allow booting from USB? Did you see the USB flash drive listed in the boot order screen?
 

1 more replies
Answer Match 56.7%

hi guys!I have a problem with my laptop unit..I download the ATI mobility radeon hd 5430 and i install it but there is a message in the end of installation appear that INSTALLATION COMPLETE(WARNING OCCURRED DURING INSTALLATION) and when i press the view log it always like this:


Existing packagesATI Catalyst Install Manager
The Lord of the Rings FREE Trial
Microsoft Visual C++ 2008 SP1 Redistributable
Communication Opt-in

Packages for install
ATI Catalyst Install ManagerFinal Status: Success
Version of Item: 3.0.790.0
Size: 20 Mbytes


Other detected devices

Error messages



I dont know what to do..please help me..
 

A:Compaq Presario cq-42-160tu

Make sure you have all the Windows .NET Framework Updates installed before you update the ATI catalyst driver
 

1 more replies
Answer Match 56.7%

I recently bought this machine and at first it worked fine. Last time i used it no probs and even shut it off correctly. The other day I went to turn it on and nothing. The led light that says that it is pluged in is on but now it is not charging the battery. I can get it to come on enough to hear that it is running but it is not booting and the screen remains black. I contacted that previous owner but she said she never had any problems with it. I want to see if it can be fixed, cheeply if possible, befor I do anything else. Thanks for the help.
 

A:compaq presario 1200

Sounds like your gonna have to get you hands dirty and take the cover off. Remove the cover and start pulling out parts. ;-)

The best way to troubleshoot a machine is to only boot with the bare requirements.

CPU, RAM, VIDEO CARD...over course power supply...

I'd take out all other parts and PCI card, remove all hard drive cables and floppy cables. Take note which way the RED LINE goes when you put it back together...

If you have MOVED the computer recently, IE transported the computer in the back of your car truck, you might want to try and RESEAT the video card, and RAM. Shipping a computer in the mail and it arriving DOA at the customer more than likely points to a video card that needs to be reseated. Lucky for us, most new motherboard come with AGP slot lock thank goodness...
 

2 more replies
Answer Match 56.7%

my mother bought a compaq presario 5304 from a family member.when she got it,there was no system recovery disk for it.there was a disk that was for the 700's series.her computer will not detect the right drive because they used the wrong recovery disk for it.how do we get the computer to recognize and install its original drive.it was 56k.i am pretty much computer illiterate.john
[email protected]
 

A:compaq presario 5304

hmm system recovery. I'm not too big on using that. My overall suggestion would be go into dos at the startup and do a simpe C:/ format or is it the other way doh... Anyways at startup of windows press oh F8 I believe for systems with win 98 or higher but if you got win95 its either f5 or f8 or you can make a boot disk and do it that way.
 

1 more replies
Answer Match 56.7%

I have an older compaq presario 5000 (5wv260), i want to upgrade the memory in it. I know it takes sdram, 168 pin, but i dont know if i need parity or non-parity. OR ecc or non-ecc... anyone know what this computer takes?
thanks
 

A:compaq presario memory help..

6 more replies
Answer Match 56.7%

yeah, it's ancient, but i'm just getting it up and running to sell it. i got it from a friend. ok, my question is- why is the cpu fan missing? and why don't i see a set of pins on the motherboard for the fan?
i thought all cpu's needed a fan, so where's the power supply for it? (the cpu is a pentium 120mhz)
 

A:compaq presario 4112

Hi, Kerri Ann!

Not necessarily. A 120MHz may not need a fan on the CPU. It will more likely have a large heatsink, and an exhaust fan at the back.
 

1 more replies
Answer Match 56.7%

I have had this PC since 2001 and it seems to be in good working condition. It originally came with Windows ME and two years ago, I upgraded the OS to Windows XP. I need help to clean the computer and start over as new. How can I do this?

Thanks

More replies
Answer Match 56.7%

Hey all,
Does anybody know if all of the motherboards in the Presario V6000 laptop series are the same size and shape?

More specifically, does anybody know if a V6000 motherboard would fit in a V6310 case?

If you need more info, let me know.

Thanks!
 

More replies
Answer Match 56.7%

I am upgrading a Compaq Presario 5000 model #5WB220 with a very low 15 GB hard drive for a friend. It currently has Windows ME and there is no Compaq Restore CD.

I have increased the memory to 320 by adding an additional 256 MB RAM.

I am wanting to totally replace the 15GB hard drive with an 80 GB hard drive and load Windows XP Home.

The problem I am finding out is that Compaq has propriertory info on a partition within the existing drive. From what I understand without the Restore CD, I can't put the new drive in.

I'm wondering if there are any other alternatives to doing this.

Can I install XP on the existing drive and then transfer all the data (to include the compaq proprietory info) to the new drive in a slave position?
 

A:Upgrade Compaq Presario

10 more replies
Answer Match 56.7%

Hello:
I'm making some changes to a compaq presario 4660 (dinosaur) and it's running windows 98. I cannot get into bios. F2, F1, delete and Tab do not get me in. I searched on google and really didn't receive good results. Well it did say that F2 would get me in, but it does not. Seemed to me there was another way to get into bios?
 

A:compaq presario 4660

16 more replies
Answer Match 56.7%

hi,

Iam siva.I need all the drivers of compaq presario c770us because some of the drivers are not functioning properly it has become a serious problem for me for many days.I will be vey grateful if you suggest me a positive reply.Thank you.
 

A:compaq presario drivers

10 more replies
Answer Match 56.7%

My laptop wants an administrator password that I don't know. Shows a system disabled code of 91550023. What do I do?

More replies
Answer Match 56.7%

Have a Compaq Presario 1020 - laptop. Info is as follows -
Series 2900A
Model FBV1433VQL1J
Serial V644HZD50299

Need a maintenance manual. Any help would be appreciated. Thank you.
 

A:Compaq Presario LAPTOP

Google Compaq for a contact number - ask them to send you a manual..
 

1 more replies
Answer Match 56.7%

i just did a fresh install on this compaq laptop w/ win2k pro and i lost several of the add on thingys that compaq added to the laptop.

ie. the volume and scroll options on the keyboard. i went to the compaq site and haven't found the documentation on what the name of the programs or drivers are called for these 2 options.

any help would be nice.
thanks
 

A:Compaq presario 1694 w/ 2k pro

You should have gotten a Restore CD with your laptop. That is the OS and all specific drivers, apps and Compaq features that were on the system. Anytime you install a "fresh" OS, you will lose all that stuff. With Compaq, I think this is not all bad. If you bought the laptop with something other that Win2K, then you are most likely SOL and on your own.
 

1 more replies
Answer Match 56.7%

Hey fellas, Im currently trying to install XP on this box. Problem being, is im having a hard time getting the drivers for the mobo and such. I dont have the cd's and such for them either. The os in on there just fine and the network card and such work dandy, but i cant seem to get the USB ports enabled. I checked in the bios and i cant locate anything and im starting to worry.

Anyone got any help for me!
 

A:Compaq Presario 5600S

More specifically im looking for VIA vt82C598AT chipset drivers.
 

1 more replies
Answer Match 56.7%

Hello;

I have had a Compaq Presario 1500 laptop for about 2 years now, and I am quite un-satisfied when it comes to multi-tasking several applications at the same time. Sometimes it is so slow that I cannot minimize a full-screen application to read up on something on the net. I currently only have 256 megs of ram, but I read on the internet that tihs model could have up to 1 gigabyte. This is great, but therein lies my question. The laptop has two ram slots, one of which has been empty since i got the computer. Could I get a gig of ram and still keep the 256y meg stick as an added boost? or is the 1 gig the maximum for both slots?
 

A:Compaq Presario RAM upgrade

Well if your laptop supports a maximum of 1gb then that means 512mb per RAM slot.
Here are a few links on Newegg which is the Maximum Memory you could get for your Laptop. This is if you are in USA
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145482
http://www.newegg.com/Product/Product.aspx?Item=N82E16820134037
http://www.newegg.com/Product/Product.aspx?Item=N82E16820172102
 

8 more replies
Answer Match 56.7%

Hi, how do you restore to factory settings a (COMPAQ PRESARIO SRI617CL)?

A:(COMPAQ PRESARIO SRI617CL)

If this computer has a Recovery Partition, when you boot the computer on the logo screen you should see a message Press F2 for setup and Press X for Recovery (X being F11 or whatever key it says) If you don't get that message, then this computer does not have a Recovery Partition (if you can still boot the computer you can look in Disk Management to see if there is a drive called Recovery)
Other then that you will need the recovery discs you made when you got the computer. How to Run Compaq Recovery Disk | eHow.com

1 more replies
Answer Match 56.7%

I need to replace HD in my Compaq but I can't seem to get the plastic cover off front without forcing it. I am afraid I will break it. Any suggestions?
Thanks for your time.
Jerry L.
 

A:COMPAQ PRESARIO COVER

Well you didn't say it so I will ask. Are you sure the front cover has to come off. Most cases you just remove the screws on the back, remove the back metal shroud, and access the machine from there. A few cases have the front covers come off but the majority don't.
 

1 more replies
Answer Match 56.7%

Hello. A buddy of mine has an old Compaq Presario 7470 that he is putting a new mobo in. Apparently, the old case has color-coded front panel wires. He has separated the wires and now he does not know which ones go where (in terms of going to reset button, power button, Etc). We have looked everywhere on the net for some sort of schematic for the Compaq case to figure out the color-coded wires. However, not even Compaq site has any info. Also, to note, the wires apparently terminate on some sort of small printed board before going to the lights and buttons. If anyone has any ideas I would appreciate your help.

Thank you,
LS
 

A:Compaq Presario 7470

The front panel wireing is one problem with trying to put a non Compaq board in a Compaq case . . the power supply may be another . . a lot of the OEM's use a proprietary Power supply with non standard connectors.

You might be able to Google Compaq Front Panel connectors to see if someone has worked it out ( i know of one guy who did for Dell )

He will almost certainly be better off buying a new case for the new board, and using whatever hardware he can with the new system.
 

3 more replies
Answer Match 56.7%

Have a Compaq Presario 1020 - laptop. Info is as follows -
Series 2900A
Model FBV1433VQL1J
Serial V644HZD50299

Need a maintenance manual. Any help would be appreciated. Thank you.
 

A:Compaq Presario 1020

http://h10025.www1.hp.com/ewfrf/wc/product?product=94911&lc=en&cc=us&dlc=en&lang=en&cc=us
 

3 more replies