Tech Problem Aggregator

Solved: Keyboard only giving upper case

Q: Solved: Keyboard only giving upper case

Im sorry this is in upper case (im not shouting) but my keyboard has suddenly decide to only give upper case letters i cant access anything lower case (like numbers) sticky keys are not on: Caps lock is not stuck: Im open to suggestions: Help: And mouse is selecting whole groups of text not individual items:
Help

A: Solved: Keyboard only giving upper case

7 more replies
Answer Match 86.94%

What I first thought would be a simple keyboard problem apparently isn't. When I type the upper case D using the right shift button, I only can get a lower case "d". When using the left shift button, I get nothing but a cursor flash and no letter at all. If I hit the D key again (2nd time) holding down the left shift button, I do finally get the upper case D and as many as I want thereafter.

What I have done so far: Thinking this was a bad keyboard, I purchased a brand new keyboard.......same problem. I then borrowed the keyboard off my wife's computer which is working well.........same problem on my computer. So not likely a keyboard problem. I then uninstalled the keyboard driver and re-installed it THREE TIMES........still same problem. This is an HP Media Center computer with XP Pro so I downloaded the very latest keyboard driver for this keyboard and installed.........still same problem. Of course I rebooted after each install.

I then went to the PC Doctor diagnostic tools and did the keyboard test which puts a keyboard on the screen and as you press each key, it blanks out the key pressed on the screen. All keys work find except for when I go to upper case with either shift button and type the letter D. Instead of just the D going blank on the screen, the C key and the CTRL key go blank also at the very same time. So for some reason my D key is being translated somewhere into a D, C with the CTRL button signal. How can that be?

I the... Read more

A:Upper Case D is acting weird and its not the keyboard

Have you tried a system restore to a time this was not occurring (?)

if you have then although very unlikely have you done any virus scans (?)

hope this helps

1 more replies
Answer Match 84.84%

Hey
I would like to know if it is possible to configure outlook 2003 to automatically change lower case i to auto upper case I whilst typing my emails

It does it on my pc at work (could be cos its a better version of outlook)but I would love to know if I can have the same facility on my home pc

I'm using Vista and windows 7

Thanks in advance
Mj
 

A:Solved: Auto change lower case to upper case

Look at the Auto Correct options.
http://www.freeemailtutorials.com/microsoftOutlook2003/outlookSpellingOptions/autoCorrectOptions.cwd
 

2 more replies
Answer Match 76.86%

Hi All.

I need info on how to change text, input into a form, to upper case and store in it's table(s) as such. I'm thinking I can use the Ucase function, but I haven't been successful.

Thanks to all who can help me!!!
 

A:Solved: Access 03 - Upper Case Text

Did you solve your last problem you posted?

Do you want all characters in Upper Case or just the first Character as in Names?
 

3 more replies
Answer Match 76.86%

I would like to double click on any cell from b4 to b100 and it will turn it to upper case as well as double click on any cell from c4 to c100 and make it proper case. Can someone help me out with this)
 

A:Solved: double click for upper case

6 more replies
Answer Match 75.6%

I created a list of companies & phone #'s etc. in access 2000. The letters are upper case. How do I change upper case listings to lower case?
 

A:Access 2000- Change upper case to lower case

7 more replies
Answer Match 68.46%

I am running excel 2000. is there a way that I can make everything enter into a cell automatically turn to upper case.

thanx
 

A:upper case

6 more replies
Answer Match 68.04%

hello mates, I'm a newcomer here, I have an ASUS laptop whose CD player has a hard time reading CDs, at the attempt to fix this issue following an online guide I accidentally deleted from the registry both upper and lower filters, now not only is the DVD player unable to read disks, both the pointer and the keyboard are irremediably stuck! it's the same problem as the following:

http://forums.techguy.org/windows-nt-2000-xp/798898-solved-xp-pro-sp3-frozen.html

this user said to have fixed it but didn't quite explain what he exactly did, my boot sequence is set to start from the CD player but since it has trouble to read disks I'm unable to boot the xp CD, the only working things are USB ports, can anybody help me please? I'm desperate and need the data in my laptop
 

A:Solved: upper and lower filters deleted, keyboard and mouse frozen help

16 more replies
Answer Match 67.62%

I have a series of Cells that are lower case text. They need to be Upper Case? How do you do that in Excel? (Also UC to LC)

Thanks

malcolmd3111
 

A:Text to Upper Case

Use the UPPER and LOWER functions, e.g.

=UPPER(A1)

then copy the results & Edit > Paste Special > Values.
 

2 more replies
Answer Match 67.62%

Iam looking to build a custom button in a tool bar that will allow me to pick a range of cells then click on it and it will make the text upper case. Is this a hard thing to build? Can some one give a some guidance on how to do this or if they know where one exists already that would be better yet.

thanx.
 

A:upper case button

Assuming you're talking Excel, ASAP has this -- http://www.asap-utilities.com/asap-utilities-excel-tools-tip.php?tip=81&utilities=Text
 

1 more replies
Answer Match 66.78%

In SQL is it possible to set a field that It will only allow you to enter values of a certain field? eg. only upper case values.
 

More replies
Answer Match 66.78%

Ok...no help with my last problem with

A:Upper/Lower case swaps

?????

2 more replies
Answer Match 65.94%

Hi,

Ever since I've linked my MS and Skype account, my email is now always "seen" as [email protected] LIVE.COM.
Even my Windows Phone when I sign in with MS account, it gets recognized as @LIVE.COM at the end.

It's slightly annoying, I've checked all my settings on the web/computer/phone.. Nothing does the trick. I do sign in with lowercase email, but it somehow gets changed to uppercase LIVE.COM on it's own.

Anyone else experienced something like this?

This is a screenshot of switching local account to MS. Note that name before LIVE.COM is in lowercase, and I did sign in with all lower case email.

imgur: the simple image sharer

I've also asked on Microsoft answers webpage, but they have no idea what I'm talking about

I'm using Windows 8.1 Pro x64, and Nokia Lumia 930 (Cyan).

Any kind of tip is greatly appreciated.

Edit: add a space after @ in email to break the link.

A:MS account email always ends up in upper case

Sounds like it's just a simple advertising gimmick, draws more attention to live.com.

2 more replies
Answer Match 65.94%

If I have data in excel that needs to be separated into columns that looks like this:18SampleStreetBIGTOWN18SampleLittleStreetLITTLETOWNWith the data wanting to look like:18 Sample Street BIGTOWN18 Sample Little Street LITTLETOWNIs there a way to separate the town which is all in Capitals?ThanksRobynmessage edited by Robyn69

More replies
Answer Match 65.94%

using word in outlook and some fixes do not work.

Sticky keys are disabled and holding both shift buttons simultaneously does not work.

Ideas? using Win Vista.
 

A:Only upper case letters, but caps lock is off

now its gone as it came....
 

2 more replies
Answer Match 65.94%

I hope someone can help or explain this problem for me.

I have a DVD I made of my website. The website is constructed with every thing relative to the local system so that it will operate from the DVD.

My XP system has 2 DVD drives. One is a read only (E:) and the other is a R/W drive (F:). The problem is that on the read only drive ALL the directory and file names are in upper case and they are truncated to 8 characters, DOS files? For instance ThisIsanImage.jpg wil be THISISANI.JPG and index.html will be INDEX.HTML.

If I copy the files to my hard drive the result is the same. Of course the html involved will not function with the case of names and directories being changed.

However, if I put the DVD in my R/W drive the directory names and file names are correct and in mixed case with names longer than 8 characters. The website works fro this drive and copies to my hard drive ok. I have never run into this before.

Any one know what's going on. Do I have a setting some where in XP that I don't know about.

Your assistance is most welcome as I want to be able to send this DVD to other people, but I can't be confident that they won't have a problem.

Regards,
SD

A:Dvd Displays All Upper Case Directories And Files

Open the Device Manager (Start > Run > type "devmgmt.msc"). Locate the DVD drive that's giving you problems, right click on it and select "Uninstall". After it has uninstalled reboot the computer (it will be automatically reinstalled on reboot).

1 more replies
Answer Match 65.94%

is there any way to make excel know the difference between uppercase and lowercase letters? for example, as far as i know, A=a, B=b, etc.

i want to know if it can tell that A=A, a=a, and A<>a

thanks to anyone who knows
 

A:upper-/lower-case differentiation in excel

10 more replies
Answer Match 65.94%

I have recently had an issue with my Vista32 affecting Word in Office 2003. The fonts will only type in uppercase regardless of keyboard caplocks being on or off.

I can however highlight the letters typed and change the case through 'format'; it continues as normal from there on in. Any suggestions?

I don't recall installing a program at the time this started, but it is possible.
Thanks
Christine

A:Upper Case locked in Office 2003

Hi Christine


Are you sure it only happens in Word 2003? Just to check, type a few lines in NotePad and WordPad to test. Let us know if you get all caps in those programs as well.

I'm not sure that System Restore will help for this problem, but if you've a recent Restore point that is just prior to the all-capitals trouble, you could try it.

Best of luck
. . . Gary

. . . and . . . Welcome to the Tech Support Forums.

6 more replies
Answer Match 65.52%

Everyday I upload some files to my website and to simplify my website operations, I use the same filename and just upload a file with new information every day. The case of file extensions is of no consequence to Windows 7, but it matters to my website. I want to standardize on one case and it doesn't matter which as long it's the same all the time. I have one app, the snipping tool, which seems to generally make files using uppercase, but I have some existing files that are lower case. I have tried to get rid of the lower case extensions by deleting the file and then recreating it with the same name. When I do, Windows changes the case from upper to lower. If I simply create a brand new file with no previous instances of that file in existence (as far as I know), then the default case is upper. How does one go about converting all existing files of a particular type to a standard file extension case, be it upper or lower.

thanks,

atom

A:Change file extension upper/lower case

Not sure you can as Windows is case insensative, but have you tried doing it from a Command prompt, enclosing the filename.ext in double quotes as "filename.ext"?

If that doesn't work, maybe a two step process would.

ren "FileName.EXT" FileName.EX"
ren "FileName.EX" FileName.ext"

8 more replies
Answer Match 65.52%

I'm searching across thirty-some Word documents in one folder. How can I specify a search for words with specific case requirements? I'm looking for the word "lesson," not "Lesson," and I want to see what files it occurs in and where those occurrences are.

Thanks for any help.


PS: Bonus points to anyone who can tell me how to use Word itself to search across multiple Word files. Word's search is a lot easier to use.

Again, thanks.

A:Searching for upper- or lower-case words in files.

The only program that I'm aware of and am 100% certain can do case sensitive searches is GREP... but that requires doing it at the C:\ prompt.

But then again... I don't use Word for anything but term papers.

7 more replies
Answer Match 65.52%

I have what i hope is a quick/easy question to answer. Whenever i transfer files from a CD-RW disk back to my hard drive, the names convert into upper case. This doesn't happen from the floppy drive or cd-r disks, only cd-rw & only on transfer back to the hard drive, not in transfer to the disk.

I have a HP cd writer (getting fairly old now) with adaptec direct cd software. i'm running windows 98. I DON'T have the "allow all upper case names" option in folder options ticked and it also happened on my old computer and is still happening on my new computer (same cd-writer transfered to the new computer).

Does anyone know how i can stop it happening? i know it's not a huge issue, but i've just bought a new computer (still getting it up & running) & i really don't want a PILE of files all with upper case names if i can avoid it, so really hoping it can be fixed

thanks
 

A:Upper case file names when transfering from CD-RW can i change it?

10 more replies
Answer Match 64.68%

Hi.

When I try to change the case from upper to lower or vice versa of filenames n windows explorer, the changes are not accepted. Also, adding or deleting of spaces in existing filename words is also not being accepted. I have admin privileges.

Thank you for help.

A:Can we change the upper/lower case of filenames in Windows Explorer?

Hi Seymoria, welcome to the Seven Forums.

Filenames in Windows Explorer are not case sensitive. This means that for Windows, the filenames ThisIsMyDocument.doc, THISISMYDOCUMENT.DOC and tHiSiSmYdOcUmEnT.DoC are all the same, the file would be found and can be referred to using any of these or any other combination of upper and lower case letters, as long as the name itself stays the same.

Therefore, if you have a file document_1.doc but you'd like to change the first letter to upper case D, selecting rename and changing the first d to D does nothing. Windows simply does not understand it, for it there was no change as the first letter did not change.

You need to work around this by renaming the file first to something else, then rename it again to Document_1.doc, this time using the upper case D. I use a neat trick here, changing the first letter from lower to upper case: I select rename, delete just the first letter of the filename, the one with lower case, then rename again this time entering the upper case first letter.

Kari

9 more replies
Answer Match 64.68%

I have a weird problem on an XP Home system that was brought in for repair.
When you turn it on, it comes up with a message. The upper and lower case of the message is switched as shown. The periods are shown as music notes! (I have shown them as as %)
~~~~
wINDoWS cOULD nOT sTArT beCAUSE oF AN ErROR IN THE sOFTWARE%
PLEAsE rEPORT tHIs PROBLEM As:
LOAD nEEDED DLLs fOR kERNEL
PLEAsE cONTACT yOUR sUPPORT PErSON TO rEPORT THIs PROBLEM%
~~~~
If I attempt to go thru safe mode, the options for safe mode, safe with networking, etc, com up - with the same upper/lower case lettering. Choose safe mode option and you get the same message as sbove.

I booted with the XP CD to attempt repair, came up with a different error message.

I am stumped! I would assume a virus, trojan, etc.
I know I can pull the hard drive and format it in another system, then go from there, but trying to avoid that if possible!

Any thoughts on what has caused this issue?

Thanks!
Sharon

A:Upper And Lower Case Switch - Music Notes As Periods!

Since you're familiar with yanking the hard drive - how's about yanking it, installing it in another system, and doing an antivirus scan of it from the "clean" system?

Depending on the virus, you may need to do a repair install - do you have the original XP installation CD?

3 more replies
Answer Match 63.84%

I have been having lots of web pages won't open and other errors and page loading issues. Today as i was waking my computer up and typing in my password, it was keeping my entries as if I had caps on.. I am able to see the actual password as I type it, so I know it wasn't an error on my part.I tried typing with caps on and caps off-same thing .I did this about 4 times and it finally allowed me in
 
I also have been having issues with connecting to my network at home where the yellow flag on my internet connection shows and I lose my connection, but gain it back in 30 seconds. I keep being told I have a broken cable (I'm on Wifi) or I have a router or access point issue, but then I get back on my wifi in 30 seconds or so, and then am okay for awhile. I have Windows 8, connect wirelessly with AT&T. My nephew installed a hidden network and we have our house network. It says connected unless the yellow flag shows up, then it says limited, but then fixes itself. All these issues happen on Chrome, Firefox and Internet Explorer.
Whew! I am sure its multiple issues.
 
It does seem like ever since my nephew set up the additional network and renamed the main house network is when the issues started happening.  I am right next to the router and the modem, so its not a distance or wall preventing me from connecting.
 
I have previously run several malware programs-Malware Bytes, Viprerescue, ATF cleaner, spybot and my antivirus is AVG. It says I am okay, but still... Read more

A:Malware? As I type my Windows password, the letters stay in upper case

Make sure your "House Network" is set as the first entry in Your Wirless Networks.
 
As Posted At Eightforums.com
 

 
Open the command prompt (in the start menu type cmd Click on  "command prompt"
Type  netsh wlan show profiles and Press enter. This will list the wireless networks your computer connects to in order of priority

To Change the priority of a net work type this command (or Paste it)
netsh wlan set profileorder name="WirelessProfileName" interface="InterfaceName" priority=1 
Change WirelessProfileName in the command for the wireless network profile name displayed in step 2 above that you want to change the priority of.
 
Change InterfaceName in the command for the name of the interface (ex: Wi-Fi) displayed in step 2 above.
 
Enter the Priority number you want to assign 1 (one) in the command for what priority order number you wanted to have the wireless network profile name listed in.
 
 

 
When the Limited Connectivity Icon shows up are you still able to load a web page? Are you using a local User account or Microsoft Live User account when loggin in?
 
 
Credit:
EightForums.Com instructions to change Wireless Network Priority Instructions
Microsoft Technet for the Commands List
 
 

1 more replies
Answer Match 59.64%

Hello! I've been having problems with url.cpvfeed.com popups for a day or so. I read over a few bulletin boards, and they all said to run HijackThis. I did that, and here's my logfile:Logfile of HijackThis v1.99.1Scan saved at 2:44:42 PM, on 7/26/2007Platform: Windows XP SP1 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\csrss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\System32\qwerty12.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\wdfmgr.exeC:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exeC:\Program Files\Common Files\Real\Update_OB\realsched.exeC:\Program Files\InternetAntiSpy\AntiSpy.exeC:\WINDOWS\System32\rundll32.exeC:\Program Files\Adobe\Photoshop Album Starter Edition\3.0\Apps\apdproxy.exeC:\Program Files\Java\jre1.6.0_01\bin\jusched.exeC:\Program Files\QuickTime\qttask.exeC:\Program Files\iTunes&#... Read more

A:Cpvfeed Popups Are Giving Me A Case Of The @$$

Hello,Your system is terribly infected. Problem with these infections nowadays is, it causes a lot of damage. Even if we clean the malware off your system, I can't guarantee that your system will be clean afterwards, because these infections/bundles leave a lot of leftovers behind that most scanners won't even recognise and logs won't show.Also, I can't promise you we can repair all the damage it caused... Even after cleaning the malware, you can still get errors afterwards because of the damage. Solving these is not always possible since it will be searching for a needle in a haystack to find the right cause and solution.So, we can try to clean this up and do what we can, but keep in mind that we can't solve ALL problems this malware already caused.In light of this it would be wise for you to back up any files and folders that you don't want to lose before we start. Reason I am telling this is because when a system is so terribly infected and we try to clean this up manually, the damage that is already present may interfere with our removal attempts. Actually, it doesn't suprise me at all your system is so terribly infected.... I notice that you do not seem to be running Antivirus software and a Firewall. This is somewhat suicidal in today's digital world.That's why I want you to install them first!!Avira, AVG OR Active Virus Shield (uncheck the Security Toolbar during install) are good FREE antivirus.Never install more than one antivirusscanner or firewall on your s... Read more

4 more replies
Answer Match 58.8%

I just got myself Aspire E-14. I realized that every time during start up, loud noise can be heard from the upper left side of the keyboard.  1. What is the hardware at the upper left side of the keyboard? 2. Will the noise do any harm to the laptop? 3. Is it fixable? 4. Is there anyone here have the same problem?

More replies
Answer Match 58.8%

Well, I messed with the registry when I shouldn't have done, and now my mouse and keyboard aren't working. Lesson learned.

I was trying to fix an external hard drive that had stopped working, and was told to delete the Upper Bounds from the registry in certain places. Unfortunately I seem to have deleted them from the wrong places. My computer will load Windows until the password screen, then I can't use my mouse or keyboard whatsoever.

I have tried Googling various solutions to this problem but haven't yet found a solution that works for my problem specifically.

I've tried Safe Mode (the same thing happens), and trying to boot from my Windows CD installation from the CD drive doesn't make any difference. I have installed the Major Geeks recovery software to a USB hard drive (http://majorgeeks.com/UBCD4Win_d5710.html), have tried to recover Windows by pressing R, and have got to the stage where I have a command prompt. It's asked me for the Admin password, now I've got a C:\WINDOWS> prompt. What do I need to type for it to tell my mouse and keyboard to work?

My computer is getting on a bit (I've had it over four years, albeit with various re-installs of Windows), and I'm only really bothered about recovering the data on there and am happy to re-install Windows then. Is it just easier to visit a local friendly computer shop, recover my data, pay a few quid for the pleasure, then re-install Windows?

Really appreciate any... Read more

A:Deleted Upper Bounds, Mouse/Keyboard not working

8 more replies
Answer Match 58.8%

ive had my current rig for a lil over a year now

its been good to me but i think its about time to revamp and redo it my present system

its my present rig is in my profile...gonna redo it with a new case, new mobo, and new cooling system

here is the list of new gear that is gonna go in it:

http://secure.newegg.com/app/WishHistoryReview.asp?position=HISTORY&submit=VIEW&ID=1261791

anyone got any suggestions of things i should sub in...im trying to keep under $425

im gonna OC this machine quite a bit if that helps with suggestions
 

A:Giving my case and cooling a revamp...check it out

Your current rig is pretty nice, but the overclocking of your P4 from3.00 to 3.06 is very minimal . But with the stuff you are going to get cooling should be no problem. Good Luck!

Sean
 

2 more replies
Answer Match 58.8%

running win xp pro, recently, when ever i hit an upper case "p", media player starts. i can be in any program, doesn't matter... and there is NOT a shortcut setup for it... if i look at properties, shortcuts, it says "none"

any ideas would be great as this is very annoying. i had this happen about a year ago, and it just stopped one day... now it's at it again

More replies
Answer Match 51.66%

Hi,
I'm not sure what happened, but one moment I can use all my international characters with the simple <alt><char> strokes that I'm used to, and now I can't. For example the ? I normally get from <right alt><,> but now that gives me nothing. I did not install any driver updates, and the keyboard is selected in control panel. I'm running windows 7 home premium 64 bits.
How do I get my international keyboard back?

Thanks in advance for your help.

A:us international keyboard not giving me the special characters anymore

Hi take a look at the link below

Keyboard Input Language - Add or Remove

Take a look here as well

Keyboard Layout - Change

1 more replies
Answer Match 50.82%

I have a Dell Optiplex GX270. When I press the power button, the power button light turns amber, I hear some fans spinning, and the CD drive spinning. However, it never gets to the boot screen (or any screen). If I open the case and press the power button, however, the power button turns green and the computer works fine (loads all the way up and functions like normal). If I close the case after it has started, it continues to run fine. I'm guessing / hoping it's not the mother board or power supply that has directly gone bad... but maybe there is a connection or something? that changes from when it's closed to when it's open. I've heard of something like... the motherboard is shorting out by touching the case... but I'm not really sure where to look for that / how. Any suggestions would be appreciated! Thanks!
 

A:Solved: Computer boots fine when case is open, but won't boot when case is closed.

15 more replies
Answer Match 50.4%

I have an Acer Aspire X1700 (Details
It's about 2 1/2 years old now. Came with Windows Vista, I upgraded it to Windows 7. Also has a newer video card than what came with it.

Anyway, The PSU fan is getting really obnoxious, it gets really loud (more or less like a lawn mower). I have taken the thing apart and have tried every suggestion given to quiet it down, which it does for a whole week or two. This is a small form factor PC, so to even take the power supply out you have to basically take out everything else just to get to it. I have looked for replacements but they are very obsolete. It's only 220W anyway, so i'd like something a little more powerful.

What I want to do is get a larger case that I can use the same hardware is (motherboard, drives, etc) and purchase a larger power supply for that case. 220W really limits the PC. The small case holds a lot of heat even with all fans cleaned and working properly. Even just taking a CD/DVD out that was in it is very hot. I want a case with better airflow than this one.
I really am not sure what kind of case to get that will meet my needs. I don't want anything really fancy. If possible I'd like to get it off newegg.com

Any suggestions would be great.
 

A:Solved: Replacing Small Form Factor Case with bigger case / new PSU

7 more replies
Answer Match 48.72%

When I had problems with Mozilla Firefox, I changed to Internet Explorer as my default browser. however, the various tasks such as File, Edit, View, Tool, Help and others is missing. Now I can't even find a place to click so I can print. Also I have to hit my cursor to the top edge of the screen before I'll be able to see the rest off the tool bars. Anything can be done about this? Thanks.
 

A:Solved: Upper left Toolbar Info missing

6 more replies
Answer Match 48.72%

I had a "System error 32" on my PC screen and went search the internet for a solution. I found one that said to go to the windows folder and delete a file that had "warnhp in it". I did so, but now if have a white box in the upper left corner of the screen under a group of my icons. I can move the icons, but the bos remains.
When I right click on the box, and select "Properties", the file listed is file://C:\WINDOWS\warnhp.html
When I right click on the box and select source, it comes up with file titled C_WINDOWS_warnhp (1) -Notepad with the following info.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<!----
***** This file is automatically generated by Microsoft Windows *****
--------><HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=windows-1252"></HEAD>
<BODY
style="BORDER-RIGHT: medium none; BORDER-TOP: medium none; BORDER-LEFT: medium none; BORDER-BOTTOM: medium none"
bottomMargin=0 bgColor=#004e98 leftMargin=0 background="" topMargin=0
rightMargin=0>
<DIV
style="LEFT: 0px; WIDTH: 1280px; POSITION: absolute; TOP: 0px; HEIGHT: 800px"><IMG
style="LEFT: 0px; WIDTH: 100%; POSITION: absolute; TOP: 0px; HEIGHT: 100%" cache
src="file:///C:/WINDOWS/web/wallpaper/Bliss.bmp"> </DIV><IFRAME id=1
style="Z-INDEX: 1002; BACKGROUND: none transparent scroll repeat 0% 0%; LEFT... Read more

A:Solved: White Box in upper left hand corner

15 more replies
Answer Match 48.72%

I have looked to no avail for a case keyboard combo for my sony vaio tap 11. The keyboard that comes with the PC is just not very good and mine is starting to not a charge for any time at all. And if a case keyboard combo exists it would make the whole thing feel a little more like a laptop (one unit versus trying to sit on sofa and hold a separate keyboard and tablet) and still give me the flexibility of being able to use it just as a tablet.
Nothing probably exists for this but woohoo if it does.

More replies
Answer Match 48.3%

I get home this afternoon and started up my Dell desktop Dimension 4600 just gave me a blank screen with a flashing cursor in the upper left hand corner. I tried to get to the "setup" (F12) and I got a "keyboard failure." Can I get my desktop back?

A:[SOLVED] Blank screen with flashing cursor in upper left

Try booting up and hitting the F8 key. Then choose the Last Known Good Config option and see what that does for you.

11 more replies
Answer Match 48.3%

I'm a contractor. I use 2007 MS Access on Windows 7. I have a form that gives me the price to charge per sq foot, using a mathematical expression in the Expression Bulider under properties when designing the form. Suppose it says
=[sq ft] * 1.23 It works fine, but the results are only realistic when the sq ft is between 500 and 6000. I don't want the form to give a value if the sq ft is below 500 or above 6000. Can I do that? Thanks.
 

A:Solved: Access - setting upper limit for formula in a form

7 more replies
Answer Match 47.88%

Today after cleaning my keyboard with a liquid cleaner, it stopped working.PC case is giving a beep sound.It is a samsung Multimedia keyboard.I dont know the model number.Please help me as soon as possible.

Thanks
 

A:Keyboard not working.Beep sound by CPU case.

Computers and liquid cleaners dont go together very well... Try to replace the keyboard and restart.

We will need to know the model number for your computer and your PCs beep sequence. ie, does it beep once? twice? et al...
 

1 more replies
Answer Match 47.88%

I've been experiencing something VERY strange with my keyboard (M/S "Elite" split keyboard) and had assumed it was failing but today I happened to use it on a different machine and discovered that the keyboard is NOT the problem (I'm using it now connected to a notebook).

Here's what happens:

In certain apps (noticeably Outlook Express) the letter "i" seems to be problematic. When typing a word containing an "i", like "Chief", the word will often come out with the "i" and "e" transposed (no, it's NOT my typing) and, very often, after having typed all the letters of a word including an "i" - like "Michael" - the "m" will appear on the screen and then nothing else - even though I've struck all the letters - and after a split-second I'll see "Mchaeli" on the screen.

Also, after invoking All Caps, the first time I use the "i" key it's still lower case. Upon the second use, it's upper case as it should be. Then, after deactivating All Caps, the first time I hit "i" it's still upper case, even though it shouldn't be.

The upper case problem has now extended to "C" and "O", as well.

What could this be? I know it sounds strange, but I'm hoping someone out there has seen something like this.

TIA,

Jay Palmer

 

A:Letters Inverted or Wrong Case - But Keyboard Okay

16 more replies
Answer Match 47.88%

i deleted the upper and lower filters aiming to fix a problem...only it made it worse because when i rebooted they didn't reappear.

help would be much appreciated
 

A:Solved: deleted upper and lower filters and rebooted they didn't return

hi what did not appear?
 

1 more replies
Answer Match 47.88%

I recently noticed that the system was trying to do 7 updates every day at closedown, and found that update was giving a return code of 800736b3.

I have run SURT several times, and it doesn't seem to give any results (or should I be looking somewhere else?).

I ran sfc /scannow and extracted the results and they are in sfcdetails.txt (attached). SFC said there were some files it couldn't fix, even though sfcdetails.txt says it has fixed all of them.

CBS.zip is much too big to upload using the paperclip - is there another way?

I tried restoring to an earlier restore point, and unfortunately all the attempted updates have flushed my list of restore points - and the oldest few all give me a return code of x00000022.

Not sure if this is one problem or two...! I am reluctant to do a System Recovery as it sounds pretty drastic - help would be much appreciated!

PS Is any more info required?

A:Windows update giving return code 800736b3; restores giving x00000022

The only errors in SFC are these...

Code:
2015-06-14 21:41:16, Info CSI 000005e7 [SR] Repairing 1 components
2015-06-14 21:41:16, Info CSI 000005e8 [SR] Beginning Verify and Repair transaction
2015-06-14 21:41:16, Info CSI 000005ea [SR] Cannot repair member file [l:24{12}]"utc.app.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-06-14 21:41:16, Info CSI 000005ec [SR] Cannot repair member file [l:66{33}]"telemetry.ASM-WindowsDefault.json" of Microsoft-Windows-Unified-Telemetry-Client, Version = 6.1.7601.18839, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
...which are caused by an MS update which they messed up the file-coding on and may get around to fixing sometime.
It's not critical, but you could get rid of it by uninstalling KB3022345 and/or KB3068708 and hiding the latter when it reappers in your offered updates list.

Please post the C:\Windows\Logs\CBS\CheckSUR.log and C:\Windows\Logs\CheckSUR.Persist.log files.

7 more replies
Answer Match 46.2%

3520 INSPIRON SCREEN DISPLAY FLICKERS WHEN TURNED ON AND CASE AROUND KEYBOARD IS TOUCHED. Is it possible the case is shorted or any pressure placed on the case around the keyboard is pressing/smashing the circuitry below? How do I troubleshoot and repair this issue?

More replies
Answer Match 42.42%

Hai team

I am facing problem while starting my Machine every time it start i tis giving a error message DMIAPI32.dll was not found.
 

A:Solved: DMIAPI32.dll is giving Error

6 more replies
Answer Match 42.42%

hi i keep on getting the blue screen of death at random times these are some error reports that were created the last time:

<?xml version="1.0" encoding="Unicode" ?>
- <SYSTEMINFO>
- <SYSTEM>
<OSNAME>Windows Vista (TM) Home Premium Home Edition</OSNAME>
<OSVER>6.0.6000 0.0</OSVER>
<OSLANGUAGE>2057</OSLANGUAGE>
<ARCHITECTURE>0</ARCHITECTURE>
<PRODUCTTYPE>3</PRODUCTTYPE>
</SYSTEM>
<MEMORYDIAGNOSTIC />
- <DEVICES>
- <DEVICE>
<DESCRIPTION>ACPI Fixed Feature Button</DESCRIPTION>
<HARDWAREID>ACPI\FixedButton</HARDWAREID>
</DEVICE>
- <DEVICE>
<DESCRIPTION>Intel Processor</DESCRIPTION>
<HARDWAREID>ACPI\GenuineIntel_-_x86_Family_6_Model_15</HARDWAREID>
<SERVICE>intelppm</SERVICE>
<DRIVER>intelppm.sys</DRIVER>
</DEVICE>
- <DEVICE>
<DESCRIPTION>Intel Processor</DESCRIPTION>
<HARDWAREID>ACPI\GenuineIntel_-_x86_Family_6_Model_15</HARDWAREID>
<SERVICE>intelppm</SERVICE>
<DRIVER>intelppm.sys</DRIVER>
</DEVICE>
- <DEVICE>
<DESCRIPTION>Intel Processor</DESCRIPTION>
<HARDWAREID>ACPI\GenuineIntel_-_x86_Family_6_Model_15</HARDWAREID>
<SERVICE>intelppm</SERVICE>
<DRIVER>intelppm.sys</DRIVER>
</DEVICE>
- <DEVICE>
<DESCRIPTION>Intel Proces... Read more

A:Solved: vista keeps on giving me BSOD

12 more replies
Answer Match 42.42%

I just installed a new Seagate hard drive for my Gateway GT5620 desktop and I am having nothing but problems with getting all of my updates installed. Windows update states I have installed 99 but there is still more and I cannot update anymore. System gives me BSOD sometimes and other times Vista just tells me that update could not be installed. I have tried to follow what microsoft states to do but everything fails. Get classic update could not be installed. I would like to get this system stable again I would love to donate this system to a family who really needs a computer for their kids going to school. Not sure what info you need to help but I have tried to run the log reports and if there is anything else let me know.

Also,
I have gone to Intel web site to download their driver scan and update tool but it would not download either.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , 32 bit
Processor: Genuine Intel(R) CPU 2140 @ 1.60GHz, x64 Family 6 Model 15 Stepping 2
Processor Count: 2
RAM: 2038 Mb
Graphics Card: Intel(R) 82945G Express Chipset Family, 256 Mb
Hard Drives: C: Total - 476937 MB, Free - 451599 MB;
Motherboard: ELITEGROUP, 945GCT-M3, 3.1, 0000
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated: Yes, On-Demand Scanner: Disabled
 

A:Solved: Vista Giving me a headache!!

16 more replies
Answer Match 42.42%

Ok so here's the thing i have no clue whats wrong with my system. Whenever i try to write a dvd using nero burning rom 50% of the times the system corrupts the dvd and is subsequently unable to read the dvd. Sometimes the system on launching the eraser restarts by itself and sometimes when i insert the dvd in my system it restarts. I have some how managed to save the corrupt dvds but i dont know why the chaos in the first place. The device manager does not show any yellow or red markers next to the drive and the system has no viruses. So whats the problem any help would be appretiated. Thanks
 

A:Solved: DVD Drive giving trouble

15 more replies
Answer Match 42.42%

We recently exchanged the modem as my grandmother works at Time Warner Cable, so, easy task. I've contacted, spoke to Roadrunner, they've 'hit' our modem, to no avail.

Occasionally - it involves my adapter going off. I use a Netgear adapter. What I have to do each time it dies, (which is about..every 1-3 hours of everyday, all day and all night)) is manually reconnect. I use Windows Vista so I have to go to the icon at the tab, and go to Connect to a network then DISCONNECT from ours as it says Connected with limited access even though the two computers icon for the networks options on the tab bar has a massive red X over it. I usually have to repeat this twice as the first re-connect attempt is always unsuccessful. We've tried resetting the adapter and modem more than once. Now, we have two other computers in the household - two laptops. They work just fine. It's only my desktop with this problem.

This only started happening the past few days, btw, since last week or the week before that or so. And we had both other computers before this issue started, so, I don't imagine that's the issue.

This issue really is urgent for me.
 

A:Solved: Wireless connection keeps giving out.

14 more replies
Answer Match 42.42%

A friend's kids were using my laptop and I began to notice that I had Winantivirus 2007 installed . I was able to uninstall it via control panel. Afterwards, NAV began to give me msg's that I had trojan.vundo. I've tried various methods to remove this bugger but it keeps coming back. Please help. Below is my hijackthis log.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 20:04, on 2007-09-08
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\System32\Novell\XTAgent.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\Network Associates\VirusScan\Mcshield.exe
C:\Program Files\Network Associates\VirusScan\VsTskMgr.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Novell\ZENworks\nalntsrv.exe
C:\Program Files\PatchLink\Update Agent\GravitixService.exe
C:\Program Files\Novell\ZENworks\RemoteManagement\RMAgent\ZenRem32.exe... Read more

A:Solved: Trojan.Vundu is giving me a fit

16 more replies
Answer Match 42.42%

Hi Guys

I started having this problem last year soon after I built my system but I ignored it.Basically,after I've on my computer for awhile idle or not,Intel Desktop utilities will suddenly flash(I had IDU configured to alert me whenever there's an error)that all my voltage(+12,+3,3,+5,+1.5,cpu vccp)dropped to 0 volt for awhile(they returned to normal after I went and checked).This had already happened through 3 PSUs and 2 CPUs.Starting I had a Pentium D and a HEC 430w PSU.Then I changed it to a cooler master extreme power 550w PSU and a Q6600 CPU,I bought a OCZ stealthxstream 500w PSU.All throughout this time,IDU keeps popping out with the voltage error.(Btw,last year I returned my board to Intel to fix a botched bios update that I had done,and my HD suddenly malfunction,which I STRONGLY suspect that it's because of the HEC power supply)

Is my motherboard,or some other parts failing?Should I be concerned?

Hope you guys can help me with this.
Thanks in advance
 

A:Solved: IDU Keeps Giving Warning:Possible MB or PSU failure?

15 more replies
Answer Match 42.42%

So my computer keeps blue screening randomly, making playing virtually impossible since it's impossible to predict crashes.

It's a Dell computer, copy/pasting the dxdiag now:

------------------
System Information
------------------

HTML Code:
Time of this report: 2/23/2012, 23:57:27
Machine name: CGHIJ-0DBCCCC50
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Inspiron 530
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs)
Memory: 3326MB RAM
Page File: 761MB used, 4448MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. DirectDraw test results: All tests were successful. Direct3D 7 test results: All tests were successful. Direct3D 8 test results: All tests were successful. Direct3D 9 test results: All tests were successful.
Sound Tab 1: DirectSound test results: All tests were successful.
Sound Tab 2: DirectSound test results: All tests were successful.
Music Tab: DirectMusic test results: All tests were... Read more

A:[SOLVED] Old Dell is giving me trouble

Try Booting in safe mode. Go to command prompt type in

CHKDSK /R

then type Y for yes then reboot.

6 more replies
Answer Match 42.42%

I have a access sample database with table A and table B.
I am trying to delete any records in table A with a matching [TicketDeliverNo] field in table B
and if [AmtPaid] field in table B >1.
I have a sub proc on the forms 'close event’ that will trigger a sql clauses to delete the records in table A.
However, I’m getting a syntax error in the SQL statement, so the error states. I tried to no avail to fix it.
Any help is highly appreciated,
Private Sub Form_Close()
Dim strSQL As String
strSQL = "DELETE tblA.*" & _
"FROM tblA" & _
"Where tblA.[TicketDeliverNo] = tblB.[TicketDeliverNo]" & _
"And tblB.[AmtPaid]>1;"
DoCmd.RunSQL strSQL
DoCmd.Close acForm, "FRMB"
End Sub

Thank You boaterjohn
 

A:Solved: sql in access vba giving error

12 more replies
Answer Match 42.42%

Please Help... I need your help!!!
My COMPAQ EVO, running XP PRO keeps "freezing" every minute... this has been happening since three days ago!
Here is the HIJACK THIS:
Logfile of Trend Micro HijackThis v2.0.3 (BETA)
Scan saved at 01:09:51 p.m., on 05/02/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\AVG\AVG9\avgchsvx.exe
C:\Program Files\AVG\AVG9\avgrsx.exe
C:\Program Files\AVG\AVG9\avgcsrvx.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\MUSICMATCH\MUSICMATCH Jukebox\mm_tray.exe
C:\PROGRA~1\AVG\AVG9\avgtray.exe
C:\Program Files\Google\Quick Search Box\GoogleQuickSearchBox.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Windows Live\Messenger\msnmsgr.exe
C:\Program Files\Efficient Sticky Notes\EfficientStickyNotes.exe
C:\Program Files\AVG\AVG9\avgwdsvc.exe
C:\Program Files\Verizon\IHA_MessageCenter\Bin\Verizon_IHAMessageCenter.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\Motive\McciCMService.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Syst... Read more

A:Solved: Help, help please!!! My compaq evo is giving me problems....

11 more replies
Answer Match 42.42%

I have a strange problem with a new dvd drive that I recently fitted it’s a Pioneer DVR-116D drive running on Windows xp Pro. The drive is recognized in “My computer” and I am able to open the CD and access the files. The problem is if I try to open a program exe file that’s on the CD, I get windows errors usually it’s a "not a valid win32 application" error.

The drive is fitted on the secondary ide socket and the drive is set to master. If I re-fit my previous DVD drive there is no problem, everything works!

I suspect that the new drive may be faulty, so just checking everything before I return the drive...any ideas?
 

A:Solved: new dvd drive giving errors

8 more replies
Answer Match 42.42%

So at first i thought it my keyboard wasn't being seen by windows 10. but sometimes after holding the bluetooth button an unknown device appears that appears to be my keyboard. yet when i type in the connection code it doesn't respond and then the device no longer is showing. It could just be another bluetooth device though; i live in a dorm so there's many other people with bluetooth devices in the area. I checked out this: https://acer--uk.custhelp.com/app/answers/detail/a_id/30072/~/how-to-pair-the-acer-bluetooth-keyboar... but it only applies to 8 and 8.1, not 10. Perhaps acer should release a driver update for windows 10 early adopters that fixes their keyboard to work with windows 10, unless there is a simple bug fix? I looked online but i seem to be the only one with this issue so far, possibly due to the newness of 10. Edit: found this post, which weirdly didn't show up previously: http://community.acer.com/t5/Windows-10/Bluetooth-not-working-after-installing-Windows-10-on-Aspire-... trying to update my drivers again to confirm this isn't an issue. edit 2: nope it added a connected devices section to replace the bluetooth section, but otherwise didn't solve the problem yet. edit 3: so after like 2 hours i finally realized what was the issue.In order for it to be discoverable you need to make sure to first install the new windows 10 specific bluetooth driver mentioned in the above post , then use the REPAIR option in the blu... Read more

A:Acer Keyboard Case (included with Acer Aspire P3) ...

I can fix this problem...1.setup windows 10 v1511 by usb2.when setup windows ready, update driver with windows update3.download driver Bluetooth and update setup from acer site belowhttp://www.acer.com/ac/en/KH/content/drivers4.restart computer5.after restart goto bluetooth and search new device6.long press on power button on keyboard bluetooth cover until see blink blue and red light together7.when bluetooth connect with keyboard cover, enter 6 code bluetooth and endter for accept code8.enjoy

1 more replies
Answer Match 42.42%

So at first i thought it my keyboard wasn't being seen by windows 10. but sometimes after holding the bluetooth button an unknown device appears that appears to be my keyboard. yet when i type in the connection code it doesn't respond and then the device no longer is showing. It could just be another bluetooth device though; i live in a dorm so there's many other people with bluetooth devices in the area. I checked out this: https://acer--uk.custhelp.com/app/answers/detail/a_id/30072/~/how-to-pair-the-acer-bluetooth-keyboar... but it only applies to 8 and 8.1, not 10. Perhaps acer should release a driver update for windows 10 early adopters that fixes their keyboard to work with windows 10, unless there is a simple bug fix? I looked online but i seem to be the only one with this issue so far, possibly due to the newness of 10. Edit: found this post, which weirdly didn't show up previously: http://community.acer.com/t5/Windows-10/Bluetooth-not-working-after-installing-Windows-10-on-Aspire-... trying to update my drivers again to confirm this isn't an issue. edit 2: nope it added a connected devices section to replace the bluetooth section, but otherwise didn't solve the problem yet. edit 3: so after like 2 hours i finally realized what was the issue.In order for it to be discoverable you need to make sure to first install the new windows 10 specific bluetooth driver mentioned in the above post , then use the REPAIR option in the blu... Read more

A:Acer Keyboard Case (included with Acer Aspire P3) ...

I can fix this problem...1.setup windows 10 v1511 by usb2.when setup windows ready, update driver with windows update3.download driver Bluetooth and update setup from acer site belowhttp://www.acer.com/ac/en/KH/content/drivers4.restart computer5.after restart goto bluetooth and search new device6.long press on power button on keyboard bluetooth cover until see blink blue and red light together7.when bluetooth connect with keyboard cover, enter 6 code bluetooth and endter for accept code8.enjoy

1 more replies
Answer Match 42%

---------------------------
Microsoft Plus!
---------------------------
You must accept the End User License Agreement to use Microsoft Plus! for Windows XP.
---------------------------
OK
---------------------------

I get the above error message when I click on the exe of Microsoft Plus! and it does not start.
Its installation CD's setup.exe file has got corrupted and therefore I can't reinstall it.
Also that few days ago it was working very fine until I installed Microsoft Plus! Digital Media Edition which is till date working very fine.
Now I'm also unable to select the screensavers which are part of the Microsoft Plus! software like Plus! Aquarium, etc.
& on selecting the same, I get the same error message as above.
As such I'm facing a lot of problem as the screensavers, games and other utilities in this software are based on 3D Graphics which work well on my system

But someone Please help me soon to get rid of the above problem. PLEASE SOON!

THANKS.
 

A:[solved] Microsoft Plus! for Win XP is giving an error on being started!

6 more replies
Answer Match 42%

Hello , i have a problem, my graphic card is showing some really weird problems.
This had started the day i had installed my graphic card, in my CPU.
Sometime my mouse freezes and with it the keyboard too gets locked.
Sometimes the pc restarts it selfs, sometimes their is that anymous BSOD.
So what i think the problem really is , it has a faulty or a damaged graphic card (nVIDIA GeForce 210 (GT218))
I tried removing the graphic card, and installed motherboards default VGA drivers and video drivers from the motherboard CD. Then their is no such problem.
But having or reinstalling the graphic card makes the text letter in MS Word so much clearer and fun to read.
But the above problems happens over and over again.
My hardware spec:
Processor: Intel Pentium Dual Core E5700
CPU Brand Name: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz
Motherboard Model: ECS G31T-M7
HDD: WDC WD3200AAJS-00V4A0
OS:WinXP SP3
I would be really greatful to that soul,who can fix this problem.
 

A:Solved: Graphic crad giving problem.

14 more replies
Answer Match 42%

Hi everyone, having a frustrating night getting my ADSL2+ connection going. Just got a Billion 7402G modem/router delivered and I am trying to get it working on an XP PC.

My NIC card works fine, and has the latest drivers. I plug in the modem as described in the manual, and follow all configuration instructions including - Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons.

But I am not being issued an IP address. The manual says this should just be automatic and has no recourse if it is not.

I set an IP address manually within the range of the router, and was able to logon to the modem via the webgui. But no internet access.
Billion support tells me "You should only need to login to router with default settings, navigate to Quick Start page, enter your ISP login details & apply, router should then connect, when finished save config to flash. Nothing else should be required, computer should automatically connect. Ensure that software firewalls aren't blocking access."

OK, so to do this, I need to put in the manual IP address... why is the manual saying to set my LAN connection to obtain IP and DNS setting automatically,and why is this not working for me? Anyway I change the settings to manual and reboot, try the suggestion. All firewalls are disabled.

I have now manually entered an IP address for my PC that allows me to login to the router. Without doing this I cannot even get to this setup pag... Read more

A:Solved: My ADSL modem is not giving an IP address

10 more replies
Answer Match 42%

I am trying to upgrade a number of VB3-generation projects to VB6. No .dlls are called in the code (that I write in the forms) but, obviously, some dlls are called when compiling and when generating distribution packages (e.g. COMCAT.dll or MFC40.dll). When the Setup routine runs, my XP laptop sees the 1998 version of the files trying to replace the 2004 versions in WINDOWS/System32 and won't let me continue (rightly so). I assume that these files were incorporated as calls from some (unknown which) of the controls placed on the VB3 forms.

Is there any way to either get around this . . . other than by recreating each of the forms using the VB6 platform? or ???

Ultimately, I want the projects (engineering number-crunchers) to be distributed in a CD on an engineering text I am close to publishing so I want them to run on (at least) XP and Windows 7 platforms.
 

A:Solved: Old VB3 .dlls giving problems migrating to VB6

12 more replies
Answer Match 42%

everytime i plug a ethernet cable into the ethernet port it never connects the device and keeps on saying LIMITED OR NO CONNECTIVITY.I bought a new network card thinking it would solve the problem but whenever i connect a device it still says Limited or no connectivity.Someone PLEASE HELP ME WITH THIS PROBLEM
 

A:Solved: Ethernet port giving trouble

7 more replies
Answer Match 42%

I went through quite a lot of working out/tweaking before realising that my sole problem of my microstuttering in games is quite simply svchost.exe (netsvcs) in Windows 7. The thing is that that process likes to be idle at about 2-4% of CPU usage, and then about every 4-8 seconds, it would spike up to 25% of CPU usage. I managed to fix my microstuttering issues by closing down that process after windows startup. The current problem is the following - svchost.exe (netsvcs) is a hub for quite a few services which are part of windows, some of which control the way windows looks (what I am saying is that after shutting down that process, some areas of Windows start to look like it's Windows 98, until the process auto-restarts itself in a few seconds/minutes, but without the spiking... well at least not for another hour or so...).
The questions that I have are:

1. Is it normal for svchost.exe (netsvcs) to be running this way (spiking up to 25% etc etc)
2. Which services that are associated with the 'netsvcs' part of svchost could be possibly giving me these problems (I have noticed that the problem seems to start arising when I start using anything internet related)?

I am running Windows 7 Ultimate 64-bit on a PC with a Core 2 Quad Q9650 at 3.0Ghz.

Thank you in advance for all the support!

A:[SOLVED] svchost.exe (netsvcs) giving me microstuttering

Hi AVZ, it's no completely unusual for svchost to cause spiking, although it's not really desirable..especially when it causes problems elsewhere.

try opening a command prompt then running the following command:
tasklist /svc /fi "imagename eq svchost.exe"

That will tell you what services are being controlled by the service host. You can find out the process id of the one causing the problem from the task manager and that will help you narrow things down.

2 more replies
Answer Match 42%

Hey folks, posting after a few infuriating hours trying to get my new build to work.
I used a GIGABYTE Z97X-Gaming 3 and an i7 4790, and when i fit the noctua NHU cooler, it just goes into a constant boot loop if the memory is in dual channel mode, however It will boot up when its not in dual channel

I tried it with the hyper 212 I had lying about, and same thing, it will not boot in dual channel, and it will boot using two none dual channel slots.
It will boot with just one stick in any one of the other slots, just not dual channel.
As a last resort I put the stock cooler in and all of a sudden everything is fine, boots up and runs fine.

This morning I had another crack at it.
I tried using the CPU-OPT and there was no difference.
I also tried using one fan in each, FAN and OPT, but to no avail.
Then I tried using the low noise fan adapters on both fans and using the splitter to plug them into in the CPU-FAN, which it worked with for ten or so minutes before I got blue screen.
I then applied the ultra low noise adapters, plugged them in the same way as above and it seems to boot up and stay stable fine for a while, but still eventually I get blue screen every now and then.

Anyone got ideas what this could be ?
I have never had a problem like this before especially with such expensive hardware.
any help would be appreciated.
 

A:Solved: New Build giving me Boot Loop

10 more replies
Answer Match 42%

Hi,
I bought a Sun (Sony) FW900 Monitor and its a 16:10 montor (designed for CAD users and the such).
Well, i've found from using photoshop and trying to design a square CD cover that the screen skews the horizontal and makes everything too wide.
I assumed this was the aspect and resoultion conflicting.
Here are my options:
800x600
1024x768
1152x864
1280x720
1280x768
1280x960
1280x1024
1360x768
1360x1024
1600x1200 < What i'm using
1792x1344
1800x1440
1856x1392
1920x1080
1920x1200
1920x1440

Suggestions?

Matt.
 

A:Solved: 16:10 monitor giving me issues with skewing...?

6 more replies
Answer Match 42%

Hello all, I recently tried installing the latest updates from Microsoft and right afterwards my computer started acting strange. For instance, I couldn't seem to connect to the internet. I tried to do an uninstall one by one but, that looked like it was going to take a while so I rolled back to the day before with System Restore.
Right now I have re-downloaded the updates and I guess I'll try them one by one and see which one causes the problem. I was wondering if anyone else was having any trouble or is it just something with my computer only? I use Windows XP, Zone Alarm, AVG antivirus. Thanks,Toni.
 

A:Solved: Is Windows Update giving anybody else trouble?

toni: I have had no trouble with Windows update and have heard of no trouble from other people. Perhaps it was just a coincident that you lost your internet after d/l the updates.
Evidently you did you get your internet up again, since you are redownloading the Updates.
 

1 more replies
Answer Match 42%

I purchased a compaq presario c700 last year with windows vista pre-installed. Having realised that it is incompartible with alot of the application programs I'd like to use, I decided to partition the hard drive and instal windows xp also on the pc. But anytime I try the xp installer gives the message 'No hardrive detected'. What could be the cause?
 

A:Solved: windows vista giving me some problems. Pls help

8 more replies
Answer Match 42%

Dell Dimension 5100 desktop running XP Home SP3 - bought a new monitor and a week later BSOD.

I can't see how there's any relation between the 2 things, but all of a sudden I'm getting a 0X7B on boot. Investigation seems to point in multiple directions - corrupt HDD, bad driver of some sort, etc.

I booted with a Dell XP Home CD, figuring I'd run Fixboot and Fixmbr from the repair console. Wrong! I type in the R, type 1 for the C:/Windows installation, hit [Enter] for the Administartor's password,.... and get no further. In all the years I've had this tower there has never been any sort of password protection until Windows starts - then we've got email passwords, forum passwords, etc. But here I am getting invalid password returns from the repair console. I've gone into the setup screen and under Security 2 types of passwords are listed - I think one's a BIOS password and the other's an Administrator pswd. Both say Not Setup.

So I use an old Winternals CD and go to a command prompt. Fixboot and Fixmbr are not valid commands. So with the same disk I access System Restore, wanting to go back a day or so. Wrong again - no restore points exist.

Then I try a Spotmau utility CD - no Fixboot or Fixmbr there either - also no restore points.

Then I go back to the Dell Home CD, hit enter to install the OS, click on Windows Home and type R. It copies a mess of stuff, and when it gets to 100% it reboots. I do not press any key, but when it finally displays something, it's ... Read more

A:[SOLVED] Corrupted Registry giving me issues

We can not assist you on getting pass the password. It is against the forum rules. We also do not assist with Hiren's Disk.

Please read the forum rules: http://www.techsupportforum.com/foru...ork&page=rules


Thread reopened as long as no assistance is given with bypassing any passwords or help with Hiren's Disk.

4 more replies
Answer Match 41.58%

Hi all...just running a healthcheck on my mother's computer. It's been running a bit oddly for ages now, and she has a firewall and antivirus loaded on but I'm not totally sure if everything's been picked up. Advice much appreciated

Thanks,

-Emma

Logfile of HijackThis v1.99.1
Scan saved at 19:00:39, on 09/11/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\wltrysvc.exe
C:\WINDOWS\System32\bcmwltry.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\system32\CTsvcCDA.EXE
C:\WINDOWS\system32\drivers\dcfssvc.exe
C:\Program Files\Sunbelt Software\Personal Firewall\kpf4ss.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\WINDOWS\system32\slserv.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Sunbelt Software\Personal Firewall\kpf4gui.exe
C:\Program Files\Alwil Software\Avast4\ashMaiSv.exe
C:\Program Files\Alwil Software\Avast4\ashWebSv.exe
C:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exe
C:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnd.exe
C:\Program Files\Picasa2\PicasaMediaDetector.exe
C:\P... Read more

A:Solved: Giving my mum's computer a malware healthcheck - HJT log attached

Looks fine
 

3 more replies
Answer Match 41.58%

Hi,

I've recently made a SP3 update on my Windows XP Home. Initially I kept on getting blue screen with this error. I was unable to load Windows or Safe Mode.

STOP: 0X0000007E (0XC0000001D, 0XF78DE8EA, 0XF78DE7F4, 0XF78DE4F0)

After reading some forums, I've unplugged all my USB devices as some people suggest that it might be the problems with drivers.

After unplugging all USB devices - printer, external HDD and mouse, Windows loaded without problem but I got a new error after Windows finishes loading.

BCCode : 1000007e BCP1 : C0000005 BCP2 : BA5038F0 BCP3 : BA5037F0
BCP4 : BA5034EC OSVer : 5_1_2600 SP : 3_0 Product : 768_1

I suspect this error has to do with drivers.

At the same time, if I try to plug in any of my USB devices, i.e. mouse, printer or external HDD, the blue screen will reappear immediately. They used to work perfectly when I was on SP2 until last night.

FYI, I'm using Dell INSPIRON 640m laptop with Windows XP Home SP2 until the moment I install the SP3 update.

Hope I can get some help or pointers here. Not impressed with SP3 update definitely!

Thank you very much.
 

A:Solved: SP3 Update and USB Devices giving blue screens

I have read that Dell does not recommend using SP3 on your PC. Have you tried to uninstall SP3?
 

3 more replies
Answer Match 41.58%

Just about some days ago, i decided to install TortoiseSvN on my Windows 7 RC 1 computer to upload to a project i am developing in on SourceForge.Net - which was a mistake (although, other users have had no problems with it). After installation, i required to restart, so i did. After that, Windows complained telling me that there were corrupt files, so i ran "chkdsk /f" and restarted. It completed quickly. I restarted AGAIN and ran the program i just installed, uh-oh, an error message appears stating: "The program can't start because MSVCR90.dll is missing from your computer. Try reinstalling the program to fix this problem.".

I googled and even binged to no avail! One Google result (there weren't that many) was relating to WinInet, a programming resource, from an MSDN post and stated that you just needed to clear the manifest (whatever that was, no idea), so thinking it was something to do with the registry or some backup file i downloaded, installed and ran CCleaner. Fixed all registry entries (made full backups) that CCleaner said was an "error" and did a junk clean.

I can start, but still getting the error, these programs:
- CodeGear RAD Studio 2009 Architect
- MSN Messenger

I can't start and get the error message with these programs:
- Camtasia Studio
- Microsoft Visual Studio 2008 (with Delphi Prism)
- TortoiseSvN

I've managed to locate some backups of this file by just searching my computer for it (using the in-buil... Read more

A:Solved: MSVCR90.dll is missing - Windows 7 | Giving me hell :@

Topic Bump.
 

2 more replies
Answer Match 41.58%

Hi, I go to google and it gives strange results sometimes - it redirects itself to camouflage clothingonline etc. My Norton found adware.hotbar and seems to have got rid of it, but it can't fix the google thing.

Norton is finding 'unknown threats' but isn't doing anything with them.

Please help me.

Logfile of HijackThis v1.99.1
Scan saved at 21:42:47, on 19/02/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\AppCore\AppSvc32.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\WINDOWS\system32\wdfmgr.exe
C:\WINDOWS\system32\VTTimer.exe
C:\WINDOWS\system32\VTtrayp.exe
C:\Program Files\CyberLink\PowerDVD\PDVDServ.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\CyberLink\Power2Go\Power2GoExpress.exe
C:\WINDOWS\System32\alg.exe
C:\Program Files\MSN Messenger\usnsvc.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Program Files\Common ... Read more

A:Solved: Google giving strange search results

8 more replies
Answer Match 41.58%

Hi,I have excel sheet which contains multiple rows for each country.The requirement is to split the file for each country and save with country name.I have got the below macro but when im trying to run it,getting error as label not defined.Please advise:
Sub CopyData()
Dim LMainWB As String
Dim LNewWB As String
Dim LRow As Integer
Dim LContinue As Boolean
Dim LColAMaster As String
Dim LColATest As String
Dim LWBCount As Integer
Dim LMsg As String
Dim LPath As String
Dim LFilename As String
Dim LColAValue As String

On Error GoTo Errorcatch

'Path to save all new workbooks to
LPath = "C:\Users\43693678\Documents\Split"

'Retrieve name of the workbook that contains the data
LMainWB = ActiveWorkbook.Name

'Initialize variables
LContinue = True
LRow = 2
LWBCount = 0

'Start comparing with cell A2
LColAMaster = "A2"

'Loop through all column A values until a blank cell is found
While LContinue = True

LRow = LRow + 1
LColATest = "A" & CStr(LRow)

'Found a blank cell, do not continue
If Len(Range(LColATest).Value) = 0 Then
LContinue = False
End If

'Value in column A
LColAValue = Range(LColAMaster).Value

'Found occurrence that did not match, copy data to new workbook
If LColAValue <> Range(LColATest).Value Then

'Copy headings
Range("A1:C1").Select
Selection.Copy

'Add new workbook and paste headings into new workbook
Workbooks.Add
LNewWB = ActiveWorkbook.Name
ActiveSheet.Paste
Rang... Read more

A:Solved: Macro giving error 'label not defined'

12 more replies
Answer Match 41.58%

Hi

I recently bought an Altec Lansing FX5051 5.1 Surround Sound Speaker set and have discovered that, when listening to Itunes, the sound coming from the rear speakers is really bad quality (like 16kbps). It sounds alright when im sitting im my chair and the front speakers drown it out and I still get the effect of surround sound, but its still really annoying! How do I fix it?

This is only when im using Itunes. On Win Media Player, RealPlayer, VLC etc its all good and the quality is great. So im guessing I have to do something in the quicktime Control panel but i jsut cant figure out what.

I have a Dell XPS 420, Service Tag: 4WS2S3J

Thanks In advance
 

A:Solved: 5.1 Rear Speakers Giving Bad Quality Sound

I changed the sample rate from 44.1kHz to 192kHz and that seems to have done it, anyone else verify thats a good idea?
 

3 more replies
Answer Match 41.58%

My SONY computer is hard wired to the router and connected with no problems until I temporarily unplugged the ethernet cord to use it to connect my grandson's laptop as I didn't want to change my router settings to connect wirelessly. After unplugging it from the laptop and plugging it back into my SONY desktop computer, the SONY will no longer connect to the Internet.

I've unplugged the ethernet cord and replugged it in with no success.

My router is a Linksys WRT54G if that helps. I have Comodo firewall installed, but didn't change any settings in it.

Can anyone tell me what to check next?
Thanks for any help.
Peg
 

A:Solved: Hardwired to router giving limited or no connectivity

7 more replies
Answer Match 41.58%

on a pc with xp, i got the full message....i just burned and or deleted 27 full albums (all at 192 bit rate or above--most at 320)and have less hard drive space from when i started.....i'm like what is going on......you can see in the properties of the folder that i have deleted 3 gigs at least.....funny thing is also....there were over 10 gigs free 2 days ago and not much downloading going on......nortons did not find a virus......HELP!!!!!!!!
 

A:[SOLVED] HELP!!!!!!!! hard drive keeps giving full message

Hi and welcome. Is Norton up to date?
 

3 more replies
Answer Match 41.58%

So awhile ago I had this problem where downloading quicktime made my Vista Home Premium after restart go to a blue screen saying some hardware has been installed incorrectly and what not. So I got a quicktime alternative from somebody on here and never though of it again. Well today I got an Iphone and it requires Itunes for certain things. SO I download Itunes w/quicktime and hope it doesn't happen again, well it did, and I still don't know what the problem is. Everybody I talk to with vista says they have no problems with quicktime or Itunes.
 

More replies
Answer Match 41.58%

Having a strange problem with office 2K, I just moved the network from an older server running NT 4.0 to a newer server running W2K advanced server. For some reason when the users attempt to run word, excel, access they get the Office Installer screen that points to the old server looking for some files. The only change to the users machines is logging onto a new server. Other then un-installing, which I tried, anyone know how to get the install new component screen to stop appearing?


 

A:{SOLVED} Office 2000: Keeps Giving Install Message?

6 more replies
Answer Match 41.58%

Now, I'm using windows 7, and I've been getting these constant crashes and bluescreens for a few months now, it happens at least once a day and sometimes up to 4 times a day.

I have tried everything. I've run memory tests. I've formatted and re-installed windows. I've stress tested my computer to the point where I didnt have any ram left or CPU usage ( turned on a ton of programs to see if it would burn itself out for some reason ) and so far, everything has come out clean, but it just keeps going.

Yesterday I decided to just take a look inside the computer so I took everything apart and cleaned it, put it back together and it continued to crash and be a ****.

Then I noticed that my GFX card was giving a bit of noise so I did this thing where you open it up and put some oil in the fan to make it run smoother, that worked but it has done nothing for my crashing issues.

These problems started happening after my little sister unplugged my computer by accident and after that it takes the computer a while to get past the loading screen for the motherboard ( the blue one that just says the type of motherboard I have ) and, ofcourse, the aforementioned bluescreens and DWM( Desktop window manager ) crashes.

Now, I'm begging you. I NEED HELP. I'm going nuts! If you would like the bluescreen information, then I'd be more than happy to send you the .dmp files that have been popping up =).

Thanks in advance!

A:[SOLVED] Computer constantly giving BSOD + DWM keeps crashing.

Now, I'm using windows 7, and I've been getting these constant crashes and bluescreens for a few months now, it happens at least once a day and sometimes up to 4 times a day.

I have tried everything. I've run memory tests. I've formatted and re-installed windows. I've stress tested my computer to the point where I didnt have any ram left or CPU usage ( turned on a ton of programs to see if it would burn itself out for some reason ) and so far, everything has come out clean, but it just keeps going.

Yesterday I decided to just take a look inside the computer so I took everything apart and cleaned it, put it back together and it continued to crash and be a ****.

Then I noticed that my GFX card was giving a bit of noise so I did this thing where you open it up and put some oil in the fan to make it run smoother, that worked but it has done nothing for my crashing issues.

These problems started happening after my little sister unplugged my computer by accident and after that it takes the computer a while to get past the loading screen for the motherboard ( the blue one that just says the type of motherboard I have ) and, ofcourse, the aforementioned bluescreens and DWM( Desktop window manager ) crashes.

Now, I'm begging you. I NEED HELP. I'm going nuts! If you would like the bluescreen information, then I'd be more than happy to send you the .dmp files that have been popping up =).

Thanks in advance!

- Ps. Sorry for re-posting, but I saw the sticky about th... Read more

19 more replies
Answer Match 41.58%

I have had this same email for around 10 years and even though it's a silly embarrassing name in terms of reliability it has been impeccable as far as I can recall.

All of a sudden tonight it decided to stop sending me emails which I knew I was to receive.

Replies from other forums as well as the sign up activation mail for this forum and another both were not received after waiting over 30 minutes with still nothing (and of course I checked the junk mail).

I tried to send an email to myself from my same hotmail and nothing.

I also tried sending several form other mails and still nothing.

After awhile I was getting one or two reply notifications from different forums come through but now I cannot trust it. I have no idea what is getting through and what isn't as when I got those replies I did another self email check and still nothing.

Any idea what is going on here?

I even checked another hotmail account to send something to that one and it worked fine so I am rather puzzled by this.

I will probs slowly migrate to another account as I have planned to do so for a long time and so this will probably be the motivating factor however I have many many internet accounts tied to that hotmail address so I may be getting important mails and losing them randomly and have no idea.

Could there be something more sinister going on such as someone intercepting the mails such that they don't get through or am I just being paranoid there? Is that likely or not so much? That ... Read more

A:[SOLVED] Why has my hotmail randomly stopped giving me mail?

Hmm not a moment after I made this post I checked it again and a couple of the mails I sent myself seems to have come through plus another one which I know would have been sent earlier. The clog in the pipe seems to be slowly unblocking...

1 more replies
Answer Match 41.16%

Hi all,
I have a Toshiba USB flash drive. I have a problem when I using it on a win2000 sysem. It keeps poping up a warnning message saying I removed the drive. And then "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)". But it is just a standard drive so that does not make sense. Other USB drives have the same issue. I can sometimes get them to work for a bit before this happens. It is almost like I removed it. It also will just do this at random. It is working pops up the warning, then not, wait a few minutes and it is working and conencted again. I tried another ports and same issue. Other USB devices work fine though. The drives in question work fine on another machine.

Any ideas?

-GM
 

A:Solved: USB flash drive keeps giving error removed messages

9 more replies
Answer Match 41.16%

I have a Dell Dimension XPS_GEN_3 Intel(R) Pentium (R) 4CPU 3.2Ghz 3.19 Ghz, 3.00Gb of RAM with Windows XP Pro SP2. Raid 1 (Mirror) config'n.
Archive/Backup storage (problem) device is Maxtor One Touch.

The device has been working correctly for some years.

I see the drive letter for the drive in Windows Explorer but when I click to expand I get the following error message - "The request could not be performed because of an I/O device error" .

The only recent activity that could have brought on this problem is my moving in a large volume of files and folders.

I need to find out how I can regain access to the files in the storage device. I can not afford to lose these files.

I have read previous thread on this type of problem but no clear solution for my situation and requirement. I hope someone can help me.

Thanks in advance.
 

A:Solved: Maxtor back up drive giving me I/O Device Error

16 more replies
Answer Match 41.16%

I am using outlook express and Have not had a problem up until today (Its been fine for a year). I can receive mail, but can not send. I have deleted and redone my email account.. I have the correct pop3 and smtp. AI get this error when I try to send """The connection to the server has failed. Account: 'mail.adelphia.net', Server: 'mail.adelphia.net', Protocol: SMTP, Port: 25, Secure(SSL): Yes, Socket Error: 10060, Error Number: 0x800CCC0E""". I am really just so aggravated. I have been messing with it for 2 hours now, with no success.. All my settings are correct as well. I have done so many trouble shooting steps and have been through 50 forums trying to find the answer! Please help!
 

A:Solved: Giving up..Outlook Express wont send mail!

16 more replies
Answer Match 41.16%

I've followed your running thread and run combo.exe and Antispyware. I'd be very grateful if you could also help me

many thanks Sheep
 

A:Solved: Dear MFDnNC need the same help with Winantispyeware pro 2007 that you are giving TimH

16 more replies
Answer Match 41.16%

Ok, now I have a new build that has All new parts, brand new case and everything, it works fine when it's partially screwwed in or outside the case, but once I put everything else in (pci devices) it doesn't turn on? What could be the problem?
 

A:HELP!! The new build that worked fine out the case doesn't work in the case!

11 more replies
Answer Match 40.74%

hey guys...and girls alike...i need serious help because i know lil things to do, but cant get rid of this stupid virus..i run symantec, it says i have a trojan...i have run spybot and adaware....here is my hijack this report.....someone please help, and note also that i am really pretty "dumb" when it comes to this computer, so the simpler you make it, the easier my life will be ;-) thanks soooooo much!

Logfile of HijackThis v1.98.2
Scan saved at 8:21:28 PM, on 2/13/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\Explorer.EXE
C:\WINNT\system32\spoolsv.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINNT\system32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Hewlett-Packard\HP Software Update\HPWuSchd2.exe
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\bin\hpotdd01.exe
C:\PROGRA~1\SYMANT~1\SYMANT~1\vptray.exe
C:\Program Files\Java\j2re1.4.2_06\bin\jusched.exe
C:\Program Files\Common Files\AOL\ACS\AOLDial.exe
C:\Program Files\Common Files\Microsoft Shared\Works Shared\WkUFind.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\WINNT\system32\winupdt.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\a... Read more

A:Solved: hijack this log, please help, its giving me popups galore and symantec is goin crazy!

7 more replies
Answer Match 40.74%

Hello,
I'm obviously missing some really basic point.
In column A, I have a date of 12/28/2006. In column B, I write the formula =YEAR(A1) and the result is 6/28/1905. Can anyone tell me what my error is?

Thanks!!!
Patricia
 

A:Solved: Excel 2003 YEAR Function Not Giving Expected Results

Hi Patricia, welcome to TSG. It sounds like your formula cell is formatted as a date. If you change the format to General, you should see the result change to 2006. Hope that helps.
 

3 more replies
Answer Match 40.74%

hi all ,

i have a desktop

i changed my broken case to a new case like

i removed the HDD and the motherboard and the CD-rom ..etc and installed them to a new case

but when i press the switch button it works normally , and the screen display normally and there are no beeps , but after like 20 second my computer turns off automatically ! ,

what may cause this issue ?
 

A:i replaced all of my computer components from my broken case to other case

could be overheating CPU. Did you apply fresh Thermal paste to the HSF after reinstalling the motherboard? Is it tight and secure? Did you blow out all the dirt, dust and debris from the fans' fins?
 

1 more replies
Answer Match 40.74%

https://www.google.ca/url?sa=i&rct=...NittXgDh_WWrmrrF3VOlIJog&ust=1443933306066004

this is my case and i want to get a motherboard that is compatible with a Intel Core I5-4460 3.2GHz (Quad Core)

list all of them and there price thx
 

More replies
Answer Match 40.32%

I cannot seem to find the solution to this. I've even tried Folder Guard trial version and it will not work properly for me.

I have a small network setup. A "server" running XP Pro, and a few client PCs also running XP Pro. The server holds important accounting data. The accounting software, BV, is a client-server software, and requires that the client PC and/or user have full read/write access to the data in order for it to work.

I have setup the client PCs to automatically map a drive to the server containing the accounting data so that BV will work. I'm using simple file sharing and we are on a workgroup.

The setup makes the data vulnerable to changes/deletions/theft and I'd like to protect it from that.

Any help is appreciated.
 

A:Solved: Hide and Protect Folders/Data While Giving Applications Full Acccess

16 more replies
Answer Match 40.32%

I'm giving a my old laptop to my friend but first I want to reinstall Windows XP so all my data will be wiped.

I bought the laptop used, so it didn't come with an OS DVD. I searched through my stuff and managed to find the Operating System DVD for my old computer which the disc to install Windows XP Media Center 2005.

So can I install this OS on the laptop? And if I do, does that mean all of my data will be gone (which is my goal)?

A:[SOLVED] Giving Dell Laptop to friend, question about reinstalling Windows XP Media C

Technically, if it's an OEM disk then, no, you can't install it. If it's a full (or upgrade) version then you should be fine providing it is not installed on any other machine. If you don't care whether it has an OS installed or not then boot from the CD (DVD?) that you have and allow the setup to proceed as far as the disk formatting section. Allow it to format and then cancel the install. Nice clean disk that only a forensic expert would be able to reconstruct any data that was there.

8 more replies
Answer Match 40.32%

hi gang!

just recently, my toolbar decided to just...delete...a whole line..the *back*forward*home*full screen* icons have just....disappeared. i click on VIEW->TOOLBARS->CUSTOMIZE, redo it, and...it just goes right back. it can't seem to remember those, or program those, whatever. any ideas???

thanx,

nmdamgud

A:upper toolbar

One you make those change right click on the tool bar and select Lock toolbars

1 more replies
Answer Match 40.32%

While working on an MS Access problem someone recommended I increase the MaxLocksPerFile value from the 9500 default to 200,000 shown in the example from MS Support. It didn't solve my problem but my users other queries ran faster. This is generally considered a good thing.

So here is my question... what is the upper limit for the MaxLocksPerFile value? Reasoning that if 200K is good 500K must be better right?

A:Upper End For MaxLocksPerFile Value

What's the problem?

2 more replies