Tech Problem Aggregator

Compaq Presario X1000 (DK454AV) BIOS corrupted – no boot

Q: Compaq Presario X1000 (DK454AV) BIOS corrupted – no boot

I went to change the boot sequence to boot from my integrated DVD so I could reload my OS. After making the change I attempted to save the BIOS settings but the system locked up during the process. Now no boot, no screen, no effect when trying to get back into the BIOS. How do I (can I) clear the BIOS?

A: Compaq Presario X1000 (DK454AV) BIOS corrupted – no boot

7 more replies
Answer Match 105%

The laptop made some subtle clicking noises and would eventually crash after being on for 30 mins+. I noticed that avast didn't load during start up and when I scheduled a boot time scan, it wouldn't run. I decided to re-install Windows (XP SP3). I deleted everything on the drive and did a quick format. About half way through the installation process, I received a black screen that there is a "hard error." I tried again and received a blue screen that says Setup can't format the partition and that the drive may be damaged.

I suspect it's a dead hard drive that's causing the problems...I was just hoping someone could confirm this. My uncle wants to keep the laptop and is willing to buy a new hard drive...but will it work?

Also, I was able to access the bios and do the HDD self test and it checked out ok, which I thought was weird. Do I need to do the longer version?

Thanks for any help!
 

A:Compaq Presario X1000 HDD failure?

Yes, the hard drive is dead and yes, a new hard drive will work fine
 

2 more replies
Answer Match 105%

My Compaq Presario X1000 has a problem that i find impossible to fix. What happens is that when I turn on the pc, it doesnt respond and just stays blank even though all the lights are on. When i learnt about the pressing the top of the f6 button while turning it on, it works. But during using the pc, it would somehow flicker and turn black again. Is there any way to permanently solve this problem?
 

A:Compaq Presario X1000 problem.

It sounds like you have a hardware problem. Maybe a power short. Maybe a bad power cable or connector. Maybe a bad motherboard. The possiblities are nearly endless.

If you feel that you are not skilled enough with notebook hardware, consider taking it to professional. Often they will diagnose for free or little money.
 

1 more replies
Answer Match 104.16%

I just bout this off of someone and the usb ports and the sound doesn't work. I've already tried uninstalling the sound drivers and reinstalling them. The Soundmax drivers install, but I get nothing when it reboots. Any help would be greatly appreciated. Thanks
 

More replies
Answer Match 102.9%

Hi, everybody. I have the above laptop and all I get is a black screen. There isn't any faint image on the screen which would tell me the back light is out. I hook up an external monitor and nothing on that one either. Any ideas what can be wrong??? The problem started right after downloading Nortons anti virus and star office. Steve
 

A:Solved: Laptop Problem Compaq Presario x1000

16 more replies
Answer Match 89.04%

Ok. Trying to fix a friend's computer, and seem to have run into a rather strange snag.  Problem:  The computer will not boot past the bios screen. Details:  When you power on the computer, the compaq logo with intel inside shows up and has the <F1 Setup> and <F10 System Recovery> options listed as well.  And this is about as far as the computer gets.  After this the whole computer is just locked up, no buttons work on the keyboard no lights come on the keyboard ect ect.  I've tried mashing on the F1 key as soon as I power on the computer and I can manage to get it to say *entering setup* but it still freezes after this point.  I've already tried eliminating possible sources of problem, all expansion cards removed, HDD and Dvd Rom disconnected, single memory module (256mb ddr 2700), only power, vga, and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos hoping that would solve the problem, to no avail.  I've tried using a different stick of memory and different memory slot as well...  Tried using both a ps2 and a usb keyboard... Ive even tried pulling out the jumper for the bios password protection (even though it didn't have a password on it, just trying anything I can think of).  The installed bios version is 3.1, and that is about all I know about the computer at this point, other than what the website tells me of it.   http://h10025.www1.hp.com/... Read more

A:Computer will not boot past bios screen, Compaq Presario SR...

Try clearing the CMOS again but this time remove the CMOS battery and hold the power button in for a few seconds. Then replace the battery and try booting up again.  On the back of the pc is the PSU condition led green or flashing?

10 more replies
Answer Match 89.04%

I just reformatted a friends Compaq Presario 3000 laptop with win xp pro. Everything was working fine on it until I updated the bios. Now the computer starts to come on and then shuts down after about a second. I have tried draining all the power but get the same result. All ideas welcome. Thank you.
 

A:Compaq Presario 3000 wont boot after bios update

9 more replies
Answer Match 88.2%

I was working on a customer's laptop, a Compaq CQ60, that refused to boot into windows and System Recovery disabled all recovery options except for Command Prompt.

On a hunch, after pressing Escape during BIOS boot, I selected HDD Test. The test ran and failed with "Replace Hard Drive." OK.. the laptop sat there for a few minutes and never did anything else, so I tried to get out of that screen. Nothing responded, so I just held the Power button to turn the computer off.

When I pressed Power again to turn the computer back on, the Power and Wireless LEDs comes on, the CD drive is accessed and then the HDD LED lights up for a second and goes out. The screen never comes up nor do the backlights.

I have tried hooking up an external monitor, but that never shows anything either.

I have tried taking the memory out, cleaning the contacts, putting them back in, swapping the modules around, booting with one or the other.... No effect.

I pulled the battery and the CMOS battery, unplugged AC and let it sit for a good half hour. I held the Power button for thirty seconds. Plugged the CMOS battery back in then the AC. Turned it on and still no go.

I cannot figure out WHAT could have happened!? Any other ideas? Thanks...
 

A:Compaq Presario CQ60 black screen no BIOS boot after HDD test

16 more replies
Answer Match 87.36%

NOTE: THIS IS A COPY OF MY POST ON THE COMPAQ FORUM...getting desperate.

Hi, i bought a 6150b from a company auction. Everything worked perfect for the longest time. Then last week i went to go turn it on, and all it does is run the CPU fan for a couple seconds, flash the AC LED about 7 - 8 times, and while thats flashing the power and hard drive LEDs stay solidly lit. Then it completely turns off. This all lasts about 3 seconds at the most. Thats what happens when on battery power.

When on AC power, the same thing happens, except it continues doing the cycle over and over again until I unplug it.

I think it might have something to do with the LCD monitor, since it does not even show a slight flicker at all. No color change like it would from when turned off to a black back lit screen when turning on.simply nothing.

I opened her up (no warranty anyways) and checked all the connections for the keyboard, monitor, DVD drive etc....also reseated them as well, with no luck.

Pulled the both RAM modules and reseated them as well, nothing.

Pulled the battery as well, no change. Still cycles the same over and over again while on AC

There are no audible errors codes (real nice HP...), and im lost at this point.

Any and all suggestions are greatly appreciated.
 

A:Compaq Presario 6150b wont boot - no BIOS screen - powers on and off repeatedly

I think instead of just pulling and replacing the CMOS battery you might purchase a new one and install it. Proceed from there. If you get a screen and it's still has a problem try a new PSU. Jazz
 

2 more replies
Answer Match 77.7%

My hard drive shot craps - either a bearing or bushing failed in he drive motor. Looking for a "thrifty" replacement.

Any one have a used hard drive for a Compaq presario X1000 laptop???

OR access to a great deal on a new or refurbished drive?

THanks
 

More replies
Answer Match 77.28%

I have a compaq presario. The bios are poop. Does anyone know if there is a way to update the bios with areal manufacturer? Or am I stuck with compaq's bios? It would be really nice if there was a way to find out who makes the bios for them and update it. Any info would be great. Thank you in advance!
 

A:Compaq Presario Bios

You need to get the BIOS from Compaq. While the board maybe MADE by another company, who knows what slight changes to the specs were made.

When you do your next upgrade, build your own and get a real BIOS.

Like working on a NEW Dell PC, almost NO Options, no Temp monitors nothing.. junk... its a DELL!
 

1 more replies
Answer Match 76.44%

hi folks, need help fast,

hi hope you can help i have a presario compaq which when i brought i went into some set up and where as when it loads it asks for a password before it loads.. i now want this off as its just annoying!!! i have the password luckily but whenever i go into it before it loads by pressing esc and try and disable it, and save config its still asks for it when i reboot any help or advice im really willing to pay i even have tried to defualt it and save but still asks any help would be amazing
 

More replies
Answer Match 76.44%

Does anyone know how to get into the bios on a Compaq presario with a model number of 5340 ?? I have tried pressing delete key.. no affect, tried pressing
F1, F2, and escape, (one at a time) but the bios don't want to open up..
It shows nothing on the screen but the COMPAQ logo when started up. Then goes imediately to the windows 98 logo, then opens up windows 98.. It works ok, but I need to get into the bios to check some settings.
Thank You..
 

A:How to Access bios on Compaq presario

8 more replies
Answer Match 76.44%

Hey guys, I have a Pentium 2 Compaq Presario 233MHz system. I was wondering if ANYONE know's hot to get into this systems BIOS. I have been trying and trying but when I hit F10 at the beginning I just get into the COMPAQ diagnostics and setup, and it says nothing about BIOS. My plans are to overclock it to see how it works, just for hands on experience, if you have any tips on that you could help me out with that also. Thanks for your guys help and I hope someone can help me. email me at [email protected] OR send me an AOL instant message at Daws202 which is my screen name. Thanks people!
-Adam-
 

A:Compaq Presario 233MHz PII BIOS

Just went threw the same missery
There is a pass word to the BIOS and you need to take out the motherboard battery to erase it. Leave it out for 5 secs, unplug the computer and turn it on unpluged to drain all the power out of it. then reinstall the battery and reboot.
You m,ay have to remove some of the perifs CD burner, JS Ect if it dosent work the first time to drain the power out of everything

Yes it sucks.
 

1 more replies
Answer Match 75.6%

my dad's old laptop was recovered after long time, but, it asks for bios password and we cannot able to remember any.. My dad said he wasn't sure it was there in the first place. it shows SYSTEM DISABLED 07437 if we try to guess the password for 3times. can anyone provide right code for the bios..?

A:Compaq Presario V3000 Bios password

@AshwinRuffian? Enter:      otrquj                      or                  toooa Regards, DP-K

3 more replies
Answer Match 75.6%

I erased the bios on a Compaq Presario 5340. Now I need to find a bios for it again. Compaq's site is no help at all.

Does anyone know where I could find one?

(my problem is that it will not boot to the HD. it will only go to the floppy disk with a program called KillDisk on it. i connected the HDs to a different computer and it worked fine without the floppy and booted to the OS. and yes the HD is first for boot order.)
 

A:Solved: BIOS for Compaq Presario 5340

15 more replies
Answer Match 75.6%

HI everyone! i need some help! i got COMPAQ PRESARIO V5206OM, and i forgot the bios password, when i give 3 times the bad password the laptop show me the next error: SISTEMA DESACTIVADO [01130], if somebody can help me i will be happy! thanks to much! 

A:COMPAQ PRESARIO V5206OM BIOS PASSWORD

Hi, Enter    yhtiwp                   or              ehejsej Regards, DP-K

1 more replies
Answer Match 75.6%

can someone unlock my bios hidden (advanced) features i need it i'm advanced user i need those tabsand all hidden functions unlockedbut if there's only hidden advanced and power tab and no more hidden settings send me the unlocked bios to flashModel:Hp Compaq CQ58Bios:InsydeH2O Setup Utility Rev 3.7 (after update)Bios Version:F.29tabsMain (shown)Advanced (Hidden)Security (shown)System Configuration (Shown, it have hidden features but the tab is shown)Power (Hidden)Exit (Shown)Please Unlock And send me to flash it!!!!!!!

More replies
Answer Match 75.6%

Cant get into my bios on my Compaq Presario 5304. I tryed delete and f8 but it just gives me to option to boot in safe mode. My CD rom drive wont work and i switched it out with another one but still wont work. I am not sure if they are both bad but I imagane that they arnt. Please help.
 

A:(Resolved) Bios Help Compaq Presario 5304

6 more replies
Answer Match 75.6%

I just restored this computer with the factory reset and I need help with the bios password the system diabled key is 59036668. Any help would be great.













Solved!

View Solution.

A:Compaq Presario C700 bios password?

Hi, Please try:     46994268 Regards.

4 more replies
Answer Match 75.6%

First I want to say hello,as I just registered here on this forum.

I hope I haven't violated any of the rules.
The reason I'm adressing you is because of my (now old) computer (Compaq Presario 14XL242) that i wish to upgrade my computer to windows xp. In order to do that i need to update the BIOS.How do I do that?

Thank you


 

A:Compaq presario 14XL242 Bios update

Greetings, and welcome to TSG!!

Look on the manufacturer's Web site for the BIOS update. There should also be instructions on how to do so.

Try: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00034791&cc=us&lc=en&dlc=en&product=95128
 

1 more replies
Answer Match 75.6%

Can I know the BIOS Password for the laptop HP Compaq Presario C506TUIts shows the message as "System Disabled [13674]"

A:Need Bios Password for HP Compaq Presario C506TU

@Ponkanagaraj? Enter     zulquvm                       or                   cxgqu Regards, DP-K

1 more replies
Answer Match 75.6%

Can anyone tell me how to get to the BIOS
 

A:{Solved} accessing BIOS on a compaq presario

6 more replies
Answer Match 75.6%

Hello! I'm new here to these forums hoping to find a solution to this problem that has been bugging me for days and keeping me from setting up my computer.

Basically after several years, I am finally dealing with the loss of my Hard-Disk drive that came with my computer. I have bought a new Samsung Spinpoint F3 HD502HJ as a replacement, and I am having trouble setting it up. Here are a few Specs for my computer:

Compaq Presario SR1303WM
AMD Sempron 3000+
BIOS Revision 3.11
Mother Board: ASUS A7V8X-LA

It's a bit of an older computer. The HDD that failed me used the old ATA standard, and I am going from that to SATA II (3 Gb/s). My motherboard does have two SATA ports on it, but I don't think the motherboard supports 3 Gb/s transfer rate. Only 1.5 Gb/s. I have an SATA cable that connects directly from the HDD to the MoBo as well as a power converter that I use to connect power to the new HDD. I am using a jumper on the fifth and sixth pins ::[:]: <--- looks like that. The reason I am using a jumper is because I have read by other people that this puts the device into the 1.5 Gb/s mode, although I'm not entirely sure. The Samsung manual my HDD came with says that in order to put the drive into this mode, you must download and use their software from their site, www.samsung.com/hdd which I have tried and failed. When I run Samsung's software, I get the error: "Error reading from drive L: data area: drive not ready (A)bort, (R)etry, (F)ail?"... Read more

A:Why BIOS does not recognize new HDD in Compaq Presario Computer?

9 more replies
Answer Match 75.6%

I just restored this computer with the factory reset and I need help with the bios password the system disabled key is 59196419. Any help would be great.Thanks so much.Spoiler (Highlight to read)     

A:Compaq Presario C700 bios password?

Please try-46894439  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

2 more replies
Answer Match 75.6%

Hola buenos dias, Tengo una notebook Compaq Presario 21-N0F3AR la cual al estar encendida y quedarse sin bateria, dio un error de windows  (File:\BCD Error codexc0000034).Al querer entrar a la bios para poder cambiar el oredn de bootea para reparar dicho error, me encuentro que me pide un password de administrador, el cual nunca se configuro.Luego de los 3 intentos fallidos me da el codigo ERROR System Locked 0949F6ABHe ledio en varios foros y a mucha gente le ha pasado lo mismo. he tratado con todos los programas que hay en la web para tratar de sacar el codigo invertido pero todos sin exito.Por favor me podran dar una solucion?Muchisimas graciasDiego  

More replies
Answer Match 75.6%

System error says 53607277 please help

A:compaq presario cq62 bios password

@robwall? Enter   42765879

1 more replies
Answer Match 75.18%

hello!

could someone help me with this?
first of all, yes i have read many posts on similar topics and all of them ring a bell but none fits my problem. or then, i haven't found that one. so idecided to actually join one of those forums...

the story so far:

i got this compaq presario x1000 laptop for free because the monitor is not working. actually it would display everything but without the blacklight so after a while i diagnosed that the inverter is not working anymore.

so now i am using an external monitor lg flatron 575lm, res. 1024x768. (i think the laptop itself has 1280x800).

graphic card ati mobility radeon 9200 (although everst says 9000), driver for the radeon 9600 series, have also tried radeon 9000 series, both work nicely on the external monitor)

everything was peaceful, until yesterday when i was playing with a program called smac (spoofing my comps mac address), had to reboot, and both monitors are working! but only until windows starts loading drivers, then it's again only the external monitor. though it seems that the backlight is active now, but the screen is black. immediately i tried to get the monitor working by installing and uninstalling drivers, wiping all ati drivers away with driver cleaner, try again... for many hours...

the result is always the same:
the laptop's monitor works nicely with vga (and the external too), but goes black when i install the ati driver. then the external monitor works nicely, all 3d... Read more

A:Presario x1000: ATI Mobility Radeon 9200 works only on external monitor

You will need to install the Microsoft .NET Framework software to be able to use the AMD/ATI Catalyst software
 

1 more replies
Answer Match 74.76%

Says system disabled after 3 attempts at administrator password. Code is 63494577 please help!

More replies
Answer Match 74.76%

Hello sir,I have a problem in bios password. I tried to reset cmos by removing rtc battery. But i can't remove password. System disabled code is 09565.Thanks,MNK











Solved!
View Solution.

A:Compaq Presario v3000 BIOS Password Reset

When asked for password try nddo or vrckh

4 more replies
Answer Match 74.76%

I can not use my pc .. I misspelled my bios password and now sends me an error code .. you poede give me an unlock code please. Error Code:  21501 first of all, Thanks  

A:Re: Compaq Presario v3000 BIOS Password Reset

Try entering the following unlock code: ckhi

1 more replies
Answer Match 74.76%

After rebooting my system I now come to a screen to enter system password. Only thing is.. I never set this and there is no way around it.I have tried the take battery out reset CMOS trick that used to work in desktops to no avail. this is the message I get after too many password attempts. system disable key 92931076











Solved!
View Solution.

A:Compaq Presario CQ61 BIOS Password Unlock

Chick try. 23699078 Use that code to go into the BIOS.Disable all passwords that are enabled.If asked for the CURRENT password use that code.If asked for NEW password just hit enter.If asked to VERIFY password just hit enter.Save and exit. REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

8 more replies
Answer Match 74.76%

Hi,I need my bios administrator password for a compaq presario cq57.I get system disabled error 61596522.Thanks.

A:compaq presario CQ57 needs BIos administrator password

Hello @kodoku Welcome to the HP Support forum. Please, try to enter this >> 74494504as a response code. This should let you enter BIOS, start your PC, unlock your BIOS and/or reset security settings. Let me know if this works for you

1 more replies
Answer Match 74.76%

When I start the computer up it goes to bios screen. It will not let me continue by pressing f2. F1 takes me to help screen, but when I exit that it is right back to bios screen and f2 does nothing.

A:compaq Presario s5200nx won't go past bios screen

Mcdolemom, welcome to the forum. Based on the age of the computer, I suspect a failed power supply unit (PSU).  Here is a guide to help you troubleshoot it. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

1 more replies
Answer Match 74.76%

Sir,My compaq presario cq 60 i have forgot the bios password (Enter Administrator password ?). after 3 attempts i got a code 63186857 Please help me .











Solved!
View Solution.

A:Compaq Presario CQ60 - How to reset the bios password?

Hi Enter: 72884299

9 more replies
Answer Match 74.76%

Need a bios password for a Compaq Presario CQ62-209WM System Disabled KEY: 5503579 Please Help. 

A:Need a bios password for a Compaq Presario CQ62-209WM

@curtism49? Check the code you've posted - it should contain 8 digits. Regards, DP-K

1 more replies
Answer Match 74.76%

how to run the system bios in laptop Compaq Presario CQ57 with Windows 10?

A:how to run the system bios in laptop Compaq Presario CQ57 wi...

ANAKONDA wrote:how to run the system bios in laptop Compaq Presario CQ57 with Windows 10?Hi, Sorry, what are you trying to do ? We don't run the system BIOS. And from your question, all I can say: Please don't touch to BIOS, this is the shortest way to brick your machine. Regards.

1 more replies
Answer Match 74.76%

I have an older compaq presario CQ62 that i'm trying to get running for my father. It will not load stating "Windows failed to start. a recent hardware or software change might be the cause" Status: 0xc000000f Info: the boot selection failed because a required device is inaccessible. I have windows 7 on a bootable USB drive but it gives me the same error when trying to boot from the usb drive. when i try to enter bios to rearrange the boot order it's asking for a password and i have no idea what it is. It's giving me a code # 54391904 any way i can reset password or still boot from USB drive? thank you in advance

A:forgot compaq presario CQ62 BIOS password

 Hi, Enter: 41099320

5 more replies
Answer Match 74.76%

I have a Compaq Presario 2200 model laptop.

I have an issue where every time by laptop batter discharges the time clock resets. I believe that this is realated to the bios battery. I have taken the laptop appart properly via guide provided on compaq website. This is the maintenance guide with all the spare part numbers listed. However, this laptop is out of warranty.

My problem is that I cannot locate the bios battery anywhere on the board. Could someone with some experience pleae review the diagram for this model and tell me where the battery is?


Thanks,
Darmin
 

A:Presario 2200 Compaq - CMOS/BIOS battery?

First of all.

Have you tried to calibrate the battery by BIOS? < This might help a lot of problems.

Second

Have you updated your BIOS ?
 

2 more replies
Answer Match 74.76%

Hi, cant enter bios setup, got error code: 56085878. Help please. Thanks

A:compaq presario CQ57 needs BIos administrator password

Enter the followng unlock code; 49983278

2 more replies
Answer Match 74.76%

Forgt the bios password to my presario CQ56 LAPTOP the errcode is 59091082 please help

A:forgot bios password's compaq presario CQ56

@n8kdg Please enter     46999004 Regards

1 more replies
Answer Match 74.76%

Hello sir, I have a problem in bios password. I tried to reset cmos by removing rtc battery. But i can't remove password. System disabled code is 03218. Thanks,Moewin

A:Compaq Presario v3000 BIOS Password Reset

Hi, Please try (lower cases)    ebceyfd   or mpf Regards.

9 more replies
Answer Match 74.76%

Well, last week was going good until my computer decided to melt down. I reworked a Compaq Presario 4712 as a backup, but I can't figure out the bios setup sequence. Can someone please help me. I'm in the middle of backing my web site up, so I can move it to a secure server.
 

A:[SOLVED] Compaq Presario 4712 bios setup

13 more replies
Answer Match 74.76%

Hello, I am attempting to access the BIOS on my HP Compaq Presario CQ62. It prompts me for a master BIOS password (which I do not know), and reports an error "System Disable. Key: 87231156"Other threads indicate that this is a common issue. May I please have my master BIOS password? And is there any other way to recover this? Thank you so much!Brandon

A:Master BIOS password - Compaq Presario CQ62

@Brandon_S1? Please enter    38199198 Regards.

1 more replies
Answer Match 73.92%

Hi all,I have a Compaq Presario CQ61-310SV notebook that does not want to start ? the screen does not turn on and always remains blank. At startup, when I press power button:Lit only leds for Power, WiFi (orange color) and Touchpad;The fan turns on, but the screen remains blank;Caps Lock and Num Lock keys blink 2 times in a sequence;According to these data, I found that there was an error, indicating to failure of the BIOS. But, despite the fact that on the forum I found many of similar cases, no advice did not help me solve this error. So I decided to ask you for help, describing in detail what I tried hoping that you will point to my mistakes and help me to solve the problem.So:First of all, I tried to perform a hard reset by:Disconnecting the AC adapter, battery and all external peripheral devices;Pressing and holding down the power button for about 1 minute;Plugging the AC adapter back into the notebook;Trying to turn on the notebook;Also I removed the CMOS battery for a few minutes ? no result.Next, I tried to recovering the BIOS using key press combination Win+B hoping that my notebook has the emergency BIOS recovery feature enabled. But the notebook silently restarts automatically after few seconds after I released the power button. How I tried to do it?I turned off notebook and I unplugged AC adapter;I disconnected the battery and all external peripheral devices;I plugged AC adapter back into the notebook;Holding Win+B I pressed power button and I rel... Read more

A:Compaq Presario CQ61-310SV: BIOS corruption failure

I noticed that no one can/wants to try to help and I do not know why... If I did something wrong or you need more information about my problem ? please tell me about this and I certainly will update the post.

9 more replies
Answer Match 73.92%

how to reset my bios passwords hp v3000

A:Re: Compaq Presario v3000 (V3230AU) BIOS Password Reset

Hi vikassingh, If you post the code that it gives you here,  then I will try to help you. -erico

9 more replies
Answer Match 73.08%

hey i recently got a compaq presario v6000 from a friend and when i turned it on for the first time i noticed that it made 3 short beeping sounds which i found out that it doesnt have a bios image but anyway the power light a battery light flashes and then reboots but i cant see anything on the screen at all when its powered on. also the fans power on for at least 2 seconds then they turn off. i dont have a hard drive but i need to at least get to the bios so i can reinstall the os using usb drive.

any help would be great and aslo people have been telling me that my motherboard could be warped how would i fix this without buying a new one because i have no money at all for the laptop.

A:compaq presario v6000 wont display bios and screen is black

It looks like you may have Bad Ram: Compaq BIOS Beep Codes - BIOS Central.
Computer Does Not Start and Emits an LED or Beep Code Compaq Presario SR5510F Desktop PC - HP Customer Care (United States - English) Or it could be the Video adapter on the motherboard. Try removing one stick of RAM and get to the Bios. You can also download the ISO image for Memtest in my signature burn the image to CD with IMGBurn also in my signature or USB and boot off of the disc and run the tests on each stick of RAM separately.

3 more replies
Answer Match 73.08%

I have a Compaq Presario CQ57-339WM and it won't boot.I tried to restore it, but I can't get into the bios to let it boot from CD.It says system disabled 67912930 after 3 failed attempts. Help!











Solved!
View Solution.

A:Compaq Presario CQ57-339WM bios password system disabled

Try >> 78670316

7 more replies
Answer Match 72.66%

Hello all great website!

Compaq Presario 7000 series (model #7QSM11) using Windows ME, AMD 1332 mhz processor. My sister's computer. Hard drive was a 60GB, but it died. So I bought a new hard drive actually tried a 160GB first but thought the 137GB issue was the problem so now I am trying a 120GB western digital Caviar.

I found and successfully flashed the latest bios. (ROM date 3/28/02-786K2 Family). I checked the bios and it does see all 120GB. But when I goto partition it, I run into problems. Three methods tried: I tried to use Western Digitals included CD-ROM, even created the DOS boot floppy that they recommended on another system. Doesn't work keeps coming up with an error that something like A:\Auto???.exe not found. I checked the floppy that file is there?? Comes up whether I am booting from the floppy or from the CD-ROM.

So I tried fdisk from a Windows ME boot disk. Fdisk will only find/or report 24GB. I cleared the partition and tried using the Compaq restore disks but they came up with the same problem.
Am I right in thinking that this is a Windows ME issue?
Can you tell me how to fix this problem?

My computer is a Dell 8100, also running Windows ME but with a Intel P4, I installed a 200GB hard drive and had to flash the bios, and then I am not sure if it was Maxtor's DDO dynamic disk overlay or Intel's application accelerator, or the Flashed Bios, but Windows ME sees the whole hard drive.

I am so frustrated, I am not completely stupi... Read more

A:Compaq Presario - Installed a new hard drive 120GB; Bios sees all of it but Fdisk

15 more replies
Answer Match 72.24%

My old compact Presario 2100 won't boot up. It is using windows xp. I can't get it to boot up even in safe mode

A:How do I get my Compaq Presario lap top to boot

Is there an error message displayed before the computer restarts?If the message flashes too quickly to read, press F8 and select "Disable automatic restart on system failure"Disable automatic restart on system failure

3 more replies
Answer Match 72.24%

I have a f560US AMD Sempron 3500+ 2.8 GHz 1.5 GB Ram 32 bit and I am trying to boot to Linux from a USB thumb drive. I installed Ubuntu using Unetbootin on my 8 GB stick but I can't seem to make this laptop boot from the USB. I've gone into the bios and tried but have failed. Help me, please.
 

A:Compaq Presario won't boot from USB

Does your laptop allow booting from USB? Did you see the USB flash drive listed in the boot order screen?
 

1 more replies
Answer Match 72.24%

I just bought and set up a new computer system, and am now trying to get my old one to boot, so that I can migrate the files needed for the new system. The monitor doesn't come on, and all I'm getting is a fast blinking green light on the tower. I've un/replugged all cables and power cords, and I know the monitor is OK because it belongs to my husband's matching computer, but my old one won't boot.

Help!!!
 

A:Compaq Presario won't boot!

I'm desperate, guys! Is there any other information I can give you to help resolve my problem? I have the Easy Transfer Cable for Vista all ready to go (and the software loaded in the old computer before I disconnected it and moved it to the card table), but I can't get my Compaq to boot.

If you can't help me, I guess I'll take it to Best Buy tomorrow and let the Geek Squad have at it...
 

3 more replies
Answer Match 72.24%

Compaq Presario 3000+ AMD Sempron processor
Windows XP SP3
1 gig PC2700 memory
80 gig IDE HD
430 watt OS
Video and sound add in cards

On power-on the power light comes on, and the fans run, monitor is black.
 

A:Compaq Presario - no boot

16 more replies
Answer Match 71.4%

Hi All
First timer here so take it easy on me.
I have a Compaq Presario S3100NX that won't boot anymore. It started shutting off about every 15 minutes and got worse with time. Now it won't boot at all. The power will come on and the hard drive would show signs of life then quit. The drive is still spinning but with no power light.
Did the hard drive die or is the power supply not putting out enough power? All the fans are running.
Any guidance would be greatly appreciated.
John
 

A:Compaq Presario S3100NX now won't boot

Sounds as though it was trying to tell you that it was overheating (CPU) and then it died !

Your best option would be to remove all power and open the case and inspect.
Warning: Hardware experience required, and knowledge (manual) of your system

From there, I'd firstly say remove all dust, so as to view the capacitors on the M/board and heat marks.

At last you should begin to remove non-essential components.

Before attempting all this - I must stop and ask you is this what you are comfortable in doing ?
Otherwise a PC service technician may be required

Also given the age of the computer, is this worth it to you ?
 

17 more replies
Answer Match 71.4%

my husbands laptop (compaq presario F700) was working just fine when suddenly the screen went black. The power was still on but nothing on screen. He turned it off, unpluged it for about an hour and tried to turn it on. It wouldn't boot, just did this weird thing on the screen that looked a lot like "snow" on a television and then lines of different colors and widths vertically for a few seconds. When he tried to press any of the "F" buttons (example F1, F2) it just beeped a weird beep. I don't have any idea what it could be. I've been around a lot of f**ked up computers and never saw anything like this. What could it possibly be? HELP!!
 

A:compaq presario F700 won't boot

try an external monitor on it

run the hard drive makers diagnostic utility on the hard drive
 

2 more replies
Answer Match 71.4%

Okay, sorry for the very little information, but someone that I know called me up and told me that "Their compaq Presario won't boot from a CD and they tinkered with the Boot up settings already, and it won't boot from the cd, because they had Vista Premium and they screwed it, and now they have Business, and it doesn't have any of their stuff on it. The CD is apparently a Backup cd, so if you have any suggestions on what to do, I only use dell computers so I am not totally familiar with the configurations of the boot menu right now.
 

A:Compaq Presario won't boot from CD Drive

ubuntuuser said:

.... they had Vista Premium and they screwed it,...Click to expand...

What does that mean? Why did they go out and buy Business when they had Home Premium?

I bought a Compaq Presario about 6 weeks ago. No problem booting from a Restore DVD. Is his computer still under warranty? If so, I think he should call HP tech support. Also, did that computer come with a Restore CD/DVD or did it have a Recovery partition on the hard drive? It most likely had the latter; it would definitely had one or the other.

In what way did your friend "tinker with the Boot up settings"? Let's face it, your friend appears to be not very computer savvy. That's going to make this more difficult.
 

1 more replies
Answer Match 71.4%

Hi,
My Compaq Presario 2100 boot up to this:
PreBoot Execution Evnironment
PXE_E61 Media Test Failure. Check cable.
Then tries to reboot again.

Then I use the QuickRecover CDs that comes with my laptop. I get this:
Exception 0E ErrorCode=0004
CauseWay Error 09 Unrecoverable exception.
The CD eject.

Then I try to boot from the MS OS CD.
I managed to get into the recover mode and get a c:\
I tried chkdsk, fdsk, but got invalid drive.

Looks like my harddrive is gone.
Questions:
I want to get a bigger drive 40GB from the same manufacturer(Toshiba), will it be compatible with the BIOS, etc?
I tried to manually pull out the harddrive from under the front of the keyboard. But I don;t want to break anything in so doing. Any ideas?

Any suggestions is much appreciated.
 

A:Compaq Presario Boot problem

As I ahve been working with computers my whole life you must be one person that might not know a lot. I am not calling you a liar or anything but I do not believe that your hard drive is under the keyboard as HP owns compaq and I ahve not seen an HP note book that has a Hard Drive under the Key Board. I believe your hard drive is under tha lab top or at the front. Mind it being you will have to take some screws out and go hunting.

On anoter note if your Hard Drive was fried yur lap top would not even reconize it. There for Ibeleieve it is a windows installaion problem I think yiou said you are using Win XP. If you are do a full format of your Note Book and try to reload the boot disks. If the boot disks dont work the just load windws as your boot disks might have a problem or are corrupted with scratches mis use etc.

Need any more help IM me.
 

2 more replies
Answer Match 71.4%

As soon as I start up the computer, the bios page appears with the options (Settings) (Boot Menu) and Recovery. I have tried entering all 3 of these operations and there is no response. The computer will just sit at te bios page for hours if left untouched. This is a 2005 computer. Did it just die or is there another cause to this problem?
 

A:Compaq Presario SR2050NX won't boot up

To pinpoint the problem you need to do some troubleshooting procedures.

Go here;

http://forums.techguy.org/hardware/580000-troubleshooting-guide-problem-builds.html

and follow the instructions under the section "You assembled the system, and it will not post"

Whether the machine is old or new the troubleshooting is the same. On an older machine the problem is likely the motherboard, however you need to prove the board defective before you replace it.
 

2 more replies
Answer Match 71.4%

Hi ,
My machine had a power loss during start up and i cant get it up and running again can someone please help i have many things on the system that i just am so desperate to keep.Current Situation.
Power up moves in loops of on off after 30 seconds with the following on screen message,
We apologize for the inconvenience but windows did not start successfully A recent hardware or software change may have caused this.
If the computer stopped responding , restarted unexpectidly or was automatically shut down to protect your files and folders choose last known good config to revert to the most recent settings that worked.
If the previous start up was interupted due to a fpower failure or due to a power failure or because the power or re-set button was pressed or if you arnt sure what caused the problem,choose start windows normally.
Safe Mode
Safe mode with networking
safe mode with command prompt
Last known good configaration (The last one that worked)
Ive tried all of the mentioned above and am still stuck in the loop of on off ect i have a recovery disk(the recovery disc doesnt have a menu and its all i had with the pc) but the prompts for this tell me all my data will be lost should i go ahead so im i in a dire as situation as i can be or can someone truly help me out (the system if windows xp).
Keeping my fingers crossed guys as all the family vid clips are on there from when the kids were small
 

A:Compaq Presario wont boot

13 more replies
Answer Match 71.4%

I have a Compaq Presario 1215EA and last week it started giving a lot of problems. I was working as usual and the screen simply freezes with no apparent reason. I reboot and some minutes later the problem again. Sometimes it freezed after some minutes, others it would stay for over 2 hours with no problems.
Last friday it decided not to boot. I press the power button, I hear the fan running but nothing happens, no Compaq Logo, no beeps, nothing.
I think this might not be a power problem because the fan is working.
I already tried the CMOS clear by removing the CMOS battery with no luck
Anyone have any idea where might be the problem?
Do I have to send it to repair center ? I would prefer not to because the warranty has already expired and here they charge a lot, sometimes to do almost nothing.
Can I do something to try to pin point the problem?
Thanks in advance for your help.
 

A:Compaq Presario 1215EA won't boot

8 more replies
Answer Match 71.4%

Hi. I have a problem with a Compaq Presario running XP Home. I took the CD player out and cleaned out broken pieces of a CD that was destroyed in it. I got it cleaned out, put back together and now the pc won't boot up. I don't know what went wrong. Cleaning the CD player was quite easy and went back together okay. I hooked all of the wires up the way they were.
On the front of this computer, there are two lights. One on the left which is green, and one on the right which is orange. Normally, when the power button is pushed, the green light comes on first, then the orange light comes on during the loading process. You can see the boot process on the monitor.
Now, after hooking it back up today, when the power button is pushed, the green light comes on, then the orange one comes on and goes back off after a moment. The green light stays on. Nothing at all shows up on the monitor, not even a blinking cursor -- it just stays blank. It stays that way indefinitely -- nothing.
The monitor light is on so it is apparently getting power, but shows nothing. I'm sure the monitor is hooked up correctly; it can only be plugged in one way.
While I had everything unhooked and was cleaning the CD player, I plugged the CD player back in for a moment and plugged in the power cord to the pc and pushed the power button. The power came on and allowed me to eject the empty tray. I did this to get the tray out of the way so I could clean beneath it. I tried to turn the power back off... Read more

A:Solved: Compaq Presario won't boot up

16 more replies
Answer Match 71.4%

I've got a Compaq Presario SR2150NX. Today it wouldn't turn on. The light comes on when I hit the button but there is no noise like the machine is starting up just the light on the front of the PC. If I pull the power cord the light stays on for about 30 seconds and then shuts off. I've tried plugging the power cord back in and attempting to start it but I get the same results.

Anyone know how I can troubleshoot this?

Thanks,

Matt
 

A:Compaq Presario SR2150NX won't boot

try removing all power supplies, then holding the power for 30-90 seconds, then replace the power supplies and try booting again. if that doesn't work, there may be a problem with your RAM. try reseating the RAM next.
 

2 more replies
Answer Match 71.4%

My boyfriends desktop which is a compaq presario that runs on windows xp crashed. It managed to start up in safe mode once and he backed up his files but now the computer will not boot at all.

You can turn it on, fans go and it lights up but the monitor only goes to a black screen with a blinking underscore in the upper left hand side. No F keys work and nothing happens when you press things. The only thing that responds is Ctrl+Alt+Delete, this restarts it but it does the same thing.

I have windows 7 and attempted to just boot that but even with the disk in the computer nothing happens. Still the black screen with blinking underscore. Nothing has happened recently to change hardware, wires or anything inside the computer and we have unplugged it and dusted the inside of the tower.

Any tips would be great.

A:Compaq presario crashed will not boot

Do you see a Compaq screen when you turn it on?

2 more replies
Answer Match 71.4%

My wife's PC is off duty due to something went wrong. Here's the story.
I can start the PC with the front button, the green light come on and the two "fans" run like ...too fast. That is as far as it goes. The monitor says. "no video signal." I have a green light on right next to the power cord plug-in. The fans seem to run much stronger than normal, and nothing else happens. NOTE: I "cannot" turn the PC off by the from start/off button, I have to unplug the cord to shut it down.

Any idea where to start checking here?

Thanks

More replies
Answer Match 71.4%

I have the above laptop and recently I had problem with it being the fact that it will not boot properly. Each time the power button is pressed, it will only try to boot for less than a second and it will shut off again. I have tested the ac adapter and it appears fine. A few of my friends said it could be a motherboard problem. Has anyone had this issue before? I was wondering if anyone knows exactly which part of the motherboard that is faulty so that I do not have to replace the whole motherboard.

Any suggestion or inputs in resolving this will be greatly appreciated.
By the way, everything is standard, has not been modified or changed.

Thanks!!
 

A:Compaq Presario R4000 will only boot for less than a second

Less than a second huh ...

I/O board or motherboard problem would be my guess
 

26 more replies
Answer Match 71.4%

Hi

I have my friend's Compaq Presario 6000 here and it won't boot up. It just goes to a black screen. I can however get into the bios and also f8 takes me to the boot menu. If I select safe mode though the same thing happens, just goes to the black screen.

Any help would be appreciated

Thanks

Dave
 

More replies
Answer Match 71.4%

Hi,
I have a Compaq Presario which will no longer boot up, it won't even get to the Login screen.
I am trying to use a bootable CD to re-install Windows XP but it gives an error. Is there a certain type of bootable CDs for Compaq Presario.

Error:
DISK BOOT FAILURE. INSERT SYSTEM DISK AND PREE ENTER
 

A:Compaq Presario S6389UK won't boot from CD

13 more replies
Answer Match 71.4%

I am using a previously owned Presario SR1901WM and was having boot up problems. The computer would turn on go to the Compaq splash screen with function options then proceed to a black screen with a blinking cursor. After that it would just go completely black then pop up to the Compaq screen and repeat this cycle. So I arnt looking for some online help and the HP site told me to unplug my "IDE" cables. And being the complete techtard I am, I unpluged the power cables as well. Now I have plugged them back in, put the panel back on, and when I push the power button nothing happens. I think I really f*ed somthing up. PLEASE HELP!!
-TIA,
Jacob
 

A:Compaq Presario boot up problems

16 more replies
Answer Match 71.4%

Okay, so this has been really frustrating me for a while. I mean, this laptop isn't one I paid a whole lot of money for or anything, but all the same I'd like to get it working.

I know for a fact that some aspect of the monitor, video card, or connections between them and the motherboard is shot. The backlighting on the LCD screen at the very least is broken. But thats okay, I want to use it with an external Monitor. Anyways, I'll try and be as specific as possible in describing my problem.

There's something wrong with the battery, because I can't even get a response from the power button without the powersupply attached.

Now, even when it's not turned on, the blue LED for the battery indicator is ALMOST always blinking. I've noticed that Scenario 1 only happens when it is blinking
Power LED- the one on the left
Battery LED- Middle one
CD LED?-one on the right

Okay, so the basic specs-

Compaq Presario F730US
RAM- 2x 512mb chips, 1Gb total
Now, what happens-

When I start it up, one of a few things happens

1)The left most LED turns on, then the right most, then the touchpad LED flashes, the powerbutton flashes, green light on the CD drive flashes, then everything shuts off

2)The left most LED turns on, then the right most, then the touchpad LED flashes, the powerbutton flashes, green light on the CD drive flashes, then everything shuts off, then starts all over again, without stopping

3)The left and right LED turn on, the middle L... Read more

A:Compaq Presario F730 won't boot

Bummmmpppp
 

2 more replies
Answer Match 71.4%

Hello
Dinosaur Compaq Presario 4660 on windows 98.
Won't boot. The power is on, but there's no beep.
The hard drive doesn't seem to spin, but there is power to all the peripherals.

Thoughts on a solution? I took off the cover and couldn't find a bad connection.

Thanks
Shannon
 

A:Compaq Presario 4660 Won't Boot

Sounds like its not even reaching POST (Power On Self Test)

To start to boot, the power supply must reach the correct state and issue a Power_OK signal to the motherboard, within a preset time (about 0.7 seconds).

This is detected by the motherboard which resets the CPU and allows the boot process to start.

But, if there is a problem with the CPU or motherboard, the reset will not happen either.

So the problem could still be the PSU, or the CPU, or the motherboard, or 1500 other bits.

There is no easy way to find the problem apart from substitution by replacement at the end of the day. The HDD not spinning up does tend to point to Power Supply Unit first though.
 

1 more replies
Answer Match 70.98%

Hi,

I recently was given a Compaq Presario M2000. It's runs windows xp home edition and has a 80GB HDD. I was told it had some problems but didn't know what until I tried to boot it up. I get 2 error messages.

One is PXE-E61 Media Test Failure, Check Cable

Two is PXE-M0F Exiting PXE-ROM
Here's what I've done so far. I have detached the battery then pushed the power button for 30 to 60 seconds. I accessed where the RAM is and pulled each one out and resetted them. I also accessed the HDD, pulled it out and then put it back in making sure it is setted correctly too.

After doing all this I put the battery back in, attached the power cord and started the laptop up. She booted up and I was able to access the windows start up screen until I got to where I had to enter a password. At this time I chose to wipe the hard drive clean. Something happened when I tried to do this because I was getting random numbers and symbols scrolling down the screen really fast. Then all of a sudden it stopped and I had a black screen. I rebooted and received those 2 errors I listed above.

Can someone please help me. I'm at a loss right now

A:Compaq Presario M2000 boot up errors

My guess would be a bad or failing hard drive. If the system is trying to do a PXE boot, the hard drive is not found or not bootable. Download the bootable diagnostic disc from whoever makes the drive and do a full scan and see if errors are returned.

6 more replies
Answer Match 70.98%

hi,
Found this old laptop, OS unknown.

will not boot up, just says "operating system not found".
went into setup, all items are shown as installed (HD, mem, CDdrive etc), I selected CD drive first boot, inserted winME Cd & rebooted, but still get same error.

Any help?

thanx ..........nick
 

More replies
Answer Match 70.98%

COMPUTER: Compaq Presario 2100 Laptop running Win XP, Svc Pack 2.

For no apparent reason, the computer malfunctioned, and when booting, goes through the following sequence:

1. The COMPAQ screen?blank screen with COMPAQ in middle.

2. Error Msg: We are sorry for the inconvenience, but Windows didn?t start successfully. A recent Hardware or software change might have caused this?and goes on to advise that if I don?t know what might have caused it, to choose to boot normally. Or I could arrow up to select to boot in Safe Mode, or Safe Mode with Command Line. No matter which one I choose, the following occurs:

3. I get the Win opening screen

4. A couple of clicks in the computer and it shuts down. As it shuts down, a blue screen with some message flashed monentarily, but I can?t catch what it says.

I tried to boot in Safe mode manually (f8) boot no matter which of the options I choose after the Safe screen choices come up, the above sequence takes place.

I hit ESC during boot (or was it f2?), anyway, I got to Setup screen and performed the Drive Test, and got a ?Fail 1 ? 7? message.

So I changed the boot sequence to the CD, hoping I could boot from the repair disk, but the above sequence again took place.

Is there anything else I should do or check before changing the hard drive? Can a repair shop re-write the boot area? And BTW, if I swap the hard drive, do all drives come with standard boot sequences? I mean, if I boot from the CD containing the replac... Read more

A:Compaq Presario 2100 Laptop won't boot

Find the manufacturer of your hard drive and run their Hard Drive Diagnostics Utility.
Lets first see if the drive is bad

1 more replies
Answer Match 70.98%

Friend's system powers up to LOGO screen only, no beeps. <F10=Setup>, <F11=System Recovery>, <ESC=Boot Menu> do not seems to do anything V5.26 at bottom. Moved 500 GB SATA drive to another system as external drive. seems OK. Fans come on I hear clicking of hard drive, can not seem to boot to a CD either.
removed battery for 30m seconds.
what else can I try?
 

A:compaq Presario SR5510F will not boot, no beeps

7 more replies
Answer Match 70.98%

Hi,

Whenever I boot up my Presario it does things in this order:

Starts making the fan noise

Displays the red Compaq logo

The Compaq logo gets weirdly distorted

It reboots and does it all over again!
I can't get into the BIOS or any other preferences, and I can't get to the Control Panel either. When I try to put in a recovery cd, it spits it back out and goes nuts again. Sometimes, if I leave it alone for a while (about 45 minutes- 3 hours) it lasts longer when booting and can actually get to Windows XP. Then, after about 10 minutes it reboots and goes nuts all over again. Here are my system specs:

AMD Athlon XP Processor 2000+ operating at 1.67GHz
2x 60GB Ultra DMA Hard Drive
256MB DDR SDRAM Memory
Integrated ProSavageDDR KM266 graphics with 32MB shared video memory

I know that the CMOS battery, the RAM stick, and the hard drive are OK.

What is going on with my Presario???
 

A:Compaq Presario 6320US Boot Problems

Well even with a dead battery and without a hard drive installed you should be able to POST and go into the BIOS. How do you know that the RAM is good though?

Sounds like it could be an overheating problem. The computer detects a high temperature and shuts down to prevent damage. In a perfect world it should shut off and stay off, but I've seen computers do an endless on/off cycle. In fact, I had a Dell that would endlessly go on and off until I yanked the power plug. You said if you leave the computer off for 1-3 hours then it'll stay on for longer. Well, the longer it's off the cooler it'll get which means the longer it can stay on before overheating.

Have you opened the case and looked inside yet? If it's dusty inside, the first thing you'd wanna do is dust it out good. Make sure all the heatsinks, fans, power supply, and all case air vents are completely clear of dust. The second thing I would check is the CPU heatsink. I'm pretty sure that CPU's heatsink has a metal retaining clip that latches onto (usually) a plastic bracket. The plastic bracket could have snapped, which would mean the heatsink isn't properly mounted anymore. That would cause the CPU to heat up to dangerous levels, which would cause the computer to shut down.

Those are the first two things I would look for and try to rule out. After that, it could be a dying power supply. Or the thermal grease could have dried out, which would mean you'd have to re... Read more

2 more replies
Answer Match 70.98%

Last night, I came home from work and picked up my laptop and set it up to download Sun Solaris 10 so I could burn it on a DVD at work today. This morning, when I woke up, I found my computer was off. I was surprised, but I just figured it was hibernating (I reinstall XP/Linux/Unix on my laptop all the time, and never know the settings). Anyways... I got to work and tried to boot it up. It makes noise when I hit the power button (fan or fans) but NOTHING HAPPENS. So far I've tried
Booting without the hard drive
Booting without the memory in slot 1 (under the keyboard)
Booting without the memory in slot 2 (accessible from the bottom of the laptop)
Booting with no memory at all
Booting with a VGA monitor attached
Booting from battery only (no AC)
Booting from AC only (no battery)

It should also be noted that the CD-ROM drive has power, will open up when I press the eject button, and I also see hard drive access lights flash a few times at the beginning of the boot process. I haven't been able to closely listen in to see if the hard drive is actually being accessed. The power button and all lights on the computer do not come on. But the fan runs. I'm guessing I have a dead motherboard? I leave this thing on alot, almost 24/7 and I've had it for over 2 years. I was just hoping someone else would have an idea before I throw this thing out the window (obviously I'll salvage the memory, hard drive, cd-rom, maybe even the keyboard and battery (which is alm... Read more

More replies
Answer Match 70.98%

As the title states, I have a cq56-219wm. The LED code leads me to believe that the cpu has died. However, I have already replaced it with a new one and still am getting the same code with no boot up. I have tried the power reset by holding the power button for one minute and still nothing. The fans are functional as well. My question is, what would the next step be for this laptop repair and will it be worth it on a 2 year old machine? Thanks in advance.

A:Compaq Presario CQ56-219WM No Boot

Unless you can find something not connected back correctly (few will repair a laptop's hardware due to fragility) then I'd RMA the CPU to try another one. If the LED blinking code is consistent they should take it as proof it is not working and replace it.

Most new hardware has a year's tech support so you might even get them to help you go over it in advance of an RMA, which is the best way to set one up anyway.

1 more replies
Answer Match 70.98%

Hello all,
I have a machine here that was working fine up till 2 days ago. And now it won't boot up. There is no POST, the monitors LED cycyles (indicating it is connected to the tower and in power save mode), and no beep codes. The LED's on the front of the tower are lit (both power and HD) and the power supply fan runs but that is it. The HD does not spin nor does the CD drives eject buttion fuction (indicating no power). The whole unit acts as though it is in sleep mode.

I am gussing the power supply failed, anyone else have any experence to the contrary or have other ideas?

Oh I also tried wiping the CMOS but to no avail. Any help with this is appreaced.

-Gameman
 

A:compaq presario 6000 boot problem

12 more replies
Answer Match 70.98%

My compaq r3000z cto failed to boot this morning. The fans and hard drive spin up. The display only shows random pixels, no bootup text whatsoever. I have removed the hard drive, cdrom, and memory and still nothing. I press f10 to enter the CMOS setup and get no graphics there either. I am afraid it may be the system board. Any ideas would be appreciated. Thanks
 

A:Compaq presario r3000z cto boot problems

This post belongs in "Mobile Computing" because the Compaq R3000z is a laptop computer...

regardless, it is probably the system board like you say. Heat has probably destroyed the motherboard. You could take it into a repair shop or take it apart yourself and see if you can clean the CPU cooling fan(s) and the cooling fins. It may be just a failed fan or motherboard
 

1 more replies
Answer Match 70.98%

Hi folks.

Great forum, full of detailed info so I hope someone can help.

I have a Compaq Presario 5650LA (it's very old) and I am trying to install Western Digital 160 GB Caviar hard drive, model - WD1600AABB. The hard drive can be seen in the bios but no matter what jumper selection I use the machine just posts (You can see the Compaq softpaq bios screen and enter it if desired) then sits with a blinking cursor in the top left of the screen.

I have swapped jumpers, ide cables, tried both channels, disconnected the CD and floppy drive, removed all extraneous cards, swapped the mem modules about, removed and reseated the BIOS battery (it was OK) and updated the BIOS to the latest version but it won't boot. I have also used another (so that's two new drives used) identical drive but it did not help. I have tried seagate, WD, etc: hard drives with no difference and all the drives are fine on another machine.

Here's the crux: When I flashed the BIOS it would not boot from it's own floppy drive, so I swapped it out but had the same problem. But, when I tried an external USB drive it booted OK and I was able to flash the BIOS. So I have a machine that will not boot from floppy or HD but will boot from CD, Hirem's boot CD, etc. Even when I tried a HD on the CD ide channel I got nothing.

If you boot with an XP cd it will find the drive and begin to install until the first reboot when the HD fails to boot again. The hard drive can also be found and t... Read more

More replies
Answer Match 70.98%

I finally got a reaction from this machine it will still not power down without unplugging and battery out. at first just black screen with options at bottom, once it allowed me to changed boot order but when I put cd in it won't boot either. No safe mode nothing. I did finally after months get this just now...
As follows: PhoenixBIOS 4.0 Release 6.1
copyright bla blah

F.32
CPU0(zero) = AMD Athalon Dual Core QL-62

CPU Stepping = B1 2000 Mhz
MemClk = 333Mhz Tcl = 5.0 Tcrd = 5 Tras = 12 Trp=5
CPU<->MCP:LDT Frequency =1800Mhz LDT Width = 16bit DOWN -16bit UP
601K System RAM Passed
1918M Extended RAM passed
1024K Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowed

P.S. I pulled the hard drive and hooked it to my desktop with a USB powered or unpowred tri hdd diagnostic device and it read the drive but wont let me explore it but it does start to run through files almost like it was trying to install itself on my machine so I cancelled it.
So I think the hard drive "might" be good still or slightly damaged.
Also F2 (start up check) will give me a please wait message...foerever.

Can anyone help with that little bit of info?
Thanks,
Doc

More replies
Answer Match 70.98%

Compaq presario with Vista. Trying to do a clean install of windows 7 on comapq presario f500. Problem is the machine will only boot from hard drive. Cd drive works fine just can't boot from it.
Windows 7 install disk won't boot. Windows xp install cd won't boot. In bios setup I've move the dvd/cdrom drive to top of boot list still no luck. So I got tricky booted from vista and starting windows 7 install cd from windows explorer. Install hung part way through and I had to turn off the computer. No I can't boot vista and have an incomplete install of windows 7 which won't boot. Not even safe mode. When you boot hit Esc the boot menus only shows notebook hard drive as an option.

I've also tried unpluging the battery to clear out cmos no help.

Help I've trying to upgrade for a relative. Now the machine is uselss.

A:Compaq presario can only boot from hard disk

Download and write the latest Win7 official installer for your licensed version to flash stick from Steps 1 and 2 here which will also show you how to get a perfect install.

If you have files to rescue from Vista you can Copy & Paste - in Windows Recovery Console.

Otherwise boot the flash stick, choose Custom install, delete all partitions and create new partition(s) as desired, format and install.

6 more replies
Answer Match 70.98%

Ok, first of all i would like to say hello to all members of TSGF!!
=D
Ok, to start, the system that im having problems with is a Compaq Presario V5000 (whichis stated in the title). I have done all that I can possibly do to help this thing. I have followed other solutions and im still having the same problem. Here is a list of what I have done:

Reseated the Ram
Reseated the processor
Replaced the CMOS battery
Bought new RAM and used all possible combinations in both RAM modules
Removed HDD
Replaced HDD
Formated HDD
Bought new battery and AC Adapter
Reapplied thermal paste to processor

I have done all of the above and the problem still continues to happen. What it does is, I will start the laptop. All the lights will come on, But nothing appears on the screen for about 15 minutes. When the COMPAQ logo finally appears, I go to setup. This is where I will start having problems. I cant really do to much of anything here. The laptop will freeze with a whole bunch of artifacts all over the screen. There is nothing wrong with the HDD, RAM, CPU, LCD, or DVD drive. I dont think its the motherboard. Sometimes it will boot my XP cd and it will begin the installation, then freeze . I really dont know what to do anymore. Please help me, any attempts will be greatly appreciated.
 

A:Compaq Presario V5000 Boot problems

I have worked on many V5000s. Good solid machines. Try this:

1. Unplug. Remove the main battery and CMOS battery. Wait 15 minutes. Reinstall the CMOS battery.

2. Remove HDD, DVD, one memory module. Unplug the touch pad (small ribbon conn under KB). Connect AC adapter. Boot to DOS with an external USB floppy. Twist the case gently. Press on the MB. Does the machine work normally? Keep it on for 30 minutes.

If YES, add back the touch pad, memory, DVD and HDD one at a time. Repeat the tests. If the machine dies, yiu have probably found the bad module.

If NO, you most likely have a bad MB. It is much cheaper to replace the MB with a good used one from Ebay than mess with the bad MB. There are several part numbers that will work. Just match your model category -Intel FF or DF and AMD FF or DF. ( FF = Full Featured and DF = Defeatured.)

Good luck.
 

1 more replies
Answer Match 70.98%

The symptoms of this problem are so specific. I hope someone recognizes them.

My computer will not finish booting normally. The screen will either remain totally blank or else it will begin booting only to go blank or sometimes some small section of the screen will be repeated all over it. The boot up process always fails in one of four places:
1) The screen will remain totally blank on power up.
2) The COMPAQ logo will appear for 2 or so seconds then it will fail.
3) The COMPAQ logo will come and go, then the cursor blinks in the upper-left corner for a few seconds, and then it will fail.
4) Windows will start loading and "Microsoft Corporation" will appear on the screen for about 1/2 seconds, then it fails.

On all occasions, the fans and LEDs will turn on, and the HD and DVD make noises.

This is the part I hope will be a huge clue to some of you out there. If anything appears on the screen during two consecutive attempts to turn the computer on, then it will always successfully finish booting on the latter attempt. It will never finish booting unless this happens.

What is strange is that it seems to know whether something appeared on the screen during the previous attempt, because during the one immediately after that, the screen almost always remains totally blank. So at most something will show on the screen only every other time I turn the computer on.

It usually takes a large number of tries before something will appear on the screen during two consecutiv... Read more

A:Strange Boot-Up Problem Compaq Presario

13 more replies
Answer Match 70.98%

First hi this is my first post.
I have a Compaq Presario V2405US laptop with windows xp home ed, last week I open to turn it on and the Compaq logo showed on the screen it beep twice then the screen read Press <F1> to Resume <F10> to Setup, I press F1 or F10 and nothing happens it wont boot up nothing screen just hangs there, next I Reboot the computer and as it's booting repeatedly tap the F8 key to get to the Safe Mode menu and nothing back to Press <F1> to Resume <F10> to Setup, I tried pressing the ESC key to check boot menu nothing,
I tried inserting the Recovery cd to repair it but it wont work at all , when I reboot it it go?s to the same Press <F1> to Resume <F10> to Setup.
If you have any suggestions please tell me how to fix this, Thank You.

A:Compaq Presario V2405US Wont Boot Up

try tapping f3

10 more replies
Answer Match 70.98%

I have a Compaq Presario R4000 notebook computer. I have had it for about two years and so far have not had any problems with it. Last night I was using Adobe Encore when the program froze, I shut off my computer manually (by holding down the power button) and whenever I try to turn it on now I am unable to.

I am greeted with the error message "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this."

I am given the options of starting in Safe Mode, Safe Mode with Networking, Safe Mode with Command Prompt, or Last Known Good Configuration (your most recent setting that worked).

None of these options yield any success, so I turned to the Operations Recovery disc.

When I attempt to run the Microsoft Windows XP Recover Console it does not seem to work, and I am greeted by a black screen with "Microsoft Windows XP Recover Console. The Recovery COnsole Provides system repair and recover functionality. Type EXIT to quit the Recovery Console and restart the computer." There is a line with the prompt "C:\>", when I type "exit", it quits the console and I return to the blue screen, typing exit seems to be my only option at this screen as nothing else happens.

If I take the route through which I would reinstall Windows XP, it tells me that I have a partition (Partition1) with 95700 MB free (roughly the size of my harddrive). However, to go this route... Read more

A:Compaq Presario R4000 boot error

Go back to the Windows XP Recovery Console

Log on to Administrator by pressing 1 (as before) the Enter

On the black Recovery Console screen

Type in CHKDSK /P
(a list of commands are available by typing chkdsk /?)

Allow check disk to complete (and fix any faults)

Type Exit to restart your computer

Report back
 

4 more replies
Answer Match 70.14%

hey, i know someon posted a similar thread to this but no one was responding on his.

so i have a compaq presario f500 that wont bring a backlight on the screen and i can tell from the lights just keeps looping the boot cycle. is there a way to make a second moniotor the default monitor via some hotkey? actually thats all i have to ask.
thanks
 

A:Compaq Presario, no backlight on screen and boot loop

can you describe your problem by providing more data? you mean, that your laptop won't start, or it starts, but you see no backlight? by default, all these quanta models are show welcome logo 2 external monitor during start. and by default, all these model with nv-go6150 northbridge have dead videochip/northbridge
 

6 more replies
Answer Match 70.14%

Hello,
I have a Compaq Presario Computer with windows XP on it. recently i started getting an error message which says lsass.exe and the computer doesnt go any further after I click on ok which is the only option there. It just goes to a blank black screen. someone mentioned to me that i should try to do a system restore on it through the safe mode, but that doesnt work either becasue same error comes even in safe mode. i have tons of data on this computer and i cannot afford to lose it. i need a way to recover my data. it seems to me that the only option i may have is ot do a system recovery through the cds that i got when i purchased the computer, is that true? someone also mentioned to me that if i have the Operating System CD then i might not have to do anything but just repair. How does this work? I cannot seem to find the O.S cd, where can i get it from? Is it the same as the Windows XP cd? also, this problem has been occuring since a few days now and of course i havent been turning on the computer since there isnt much i can do, so by this problem just being there is it making it worse or not? i just dont have the time right now but does that mean that the problem just sitting there is harming it further? Some people have also told me of how to recover data using Ubuntu or something, how good is that? please help me in this asap. thank you so much
 

A:Compaq Presario wont boot up even in safe mode

You can use a number of Linux distros to tunnel through the back door of a Windows system for the purpose of rescuing your files but if you have to burn a CD, it may as well be Hirens BootCD which includes MiniXP and once in there, you'll be in familiar territory to find and copy out your data on to memory sticks or an external hard drive.

When you've got it all, then go for the computer manufacturer's recovery disk and it won't matter too mucj if it restores the machine to the day it left the factory. You'll lose any programmes you've installed since then but hopefully, you'll still have the installation disks for those.
 

2 more replies
Answer Match 70.14%

PC was working just fine a few days ago, then this happened.First, I couldn't get it to turn on so I unplugged the power cord compressed the start button counted 50 times reattached the power cord and it started.I was attempting to repair it once I figured out something was terribly wrong.  Then five or so minutes into repairs the system shut down.  I've tried this method six times and the same thing keep happening.The power supply is showing green on the back on the PC.Now I'm wondering if I need a new motherboard.  The PC is and HP/Compaq SR5123WM and it's nine years old.  And there is no support from HP for this unit.  But it works fine when it's working.Please don't tell me I need to trash this PC.  Every picture of my grandchildren and movies are stored in the pc.  At this point I cannot retrieve them.Please tell me this can be fixed for a moderate repair cost.  It's been the best pc I've ever had.Thanks in advance for replies.  Help.

A:Compaq Presario SR5123WM turns off halfway through boot

Based on the details you have given, the most common  problems are:A. Failing power supplyB. Failing RAM stickC. Failing hard drive.The fact that the PSU has a green light has little value. There are a number of things the PSU has to do. The green light only means that part of it is on.This PC is rather old. Have you ever cleaned out the dust? All of the dust?

10 more replies
Answer Match 70.14%

Hi,

One of my Compaq Presarios is doing strange things. When I plug it in, it automatically turns on. When it reaches the Compaq logo, it just stays there and nothing happens. One thing I notice is that the CPU light doesn't blink at all.

Does anybody have an idea of what is going on?

EDIT: The most recent time I plugged it in the fan started making this horrible noise (sort of like a high-pitched motor running at top speed combined with screaming).
 

A:Solved: Compaq Presario 6320US Boot Problems (again)

12 more replies
Answer Match 70.14%

Well, my problem is a strange but persistent one. It appears my PC WILL boot and start but right after the microsoft loading bar, the monitor goes pitch black and stays off and I'm not sure if the PC is on but it lights up as if it were but won't do a thing.

Now, I've tried everything Vista has to cure this (Startup Repair could not diagnose ANY problems). What is the deal here?

Any help, especially quick and urgent would be appreciated as I NEED this laptop for work,
 

A:Compaq Presario F700 w/ Vista boot errors?

Hi

your monitor isnt supporting the refresh rate or screen size selected, you will need to start in safe mode and set it to 640X480 and then reboot back into normal mode.

If this doesnt cure it start it safe mode and use device manager to remove the video card, reboot and let Vista refind it, you may need to update the driver.

regards
 

1 more replies