Tech Problem Aggregator

Need reco: IDE standard-to-mini connector adapter or cable?

Q: Need reco: IDE standard-to-mini connector adapter or cable?

I have a couple of systems that only have one type of IDE connector and need to flip each way. One of them is a small system but its one/only IDE port is fullsize... normal size. However I want to put a laptop-type DVD/RW in it that uses the miniature IDE/ATA port.

on two other Dell Opti desktops I have the opposite issue: They only have the small size IDE header, but I have a device that needs a fullsize connector.

Am I looking for an adapter that has male/male on each side, mini & standard? Or is there a cable out there, female on each end, that has fullsize on one and small/micro/mini on the other?

thx for help
z

A: Need reco: IDE standard-to-mini connector adapter or cable?

6 more replies
Answer Match 70.98%

Smatguys
I need to buy several USB 2.0 [at least] hubs for extra ports, for several machines. The one I'm looking at is a Belkin 4-port minihub, and it unfortunately has a very short tail so I'll have to buy an extension. The belkin, at http://www.amazon.com/Belkin-4-Port...1?ie=UTF8&s=electronics&qid=1236107603&sr=8-1
is not powered [no ac/adapter].
What I'm wondering is several things:
- I tried to find a hub with ext. power, but unfortunately the reviews of many of those are terrible. the good-review ones are expensive. ?? I don't need an industrial grade mega-port expander, just a few simple ports for routine things like cameras, ipods, etc.
- For a non-ext. powered USB hub, what is the cable length practical limit? I realize some devices will be more sensitive to the signal drop than others, but is there a rule of thumb? I'm leery of a 6' or longer extension, especially since I have to have a junction in between: the cord on the hub is fixed, so i have to plug it into an extension cord [more loss]
- Do any of you know a GOOD hub with its own p/s, with a cord about 3' long? that is what I was looking for but just didn't see a slam-dunk choice, searching Newegg, Amazon, and [ugghh] BestBuy.

thx
Zapp
 

More replies
Answer Match 61.74%

Hey, I wanted to put some new games on my Laptop, and I got the Direct X 9.0c Compatible Graphics Adapter message. So I went online, and was instructed to go onto Device Manager and I found I had Standard VGA Graphics Adapter, so then I got some kind of update checker and it looked through my hardware and found that my Graphic Adapter needed updating... :blush:

I have already put some of the games I want on my laptop before now, and un-installed them when I ran out of space, and now I have more space I want to put them back on.

I tried a link for the Update, but it told me to use Windows Update, but it doesn't seem to work.

Does anyone know a free way of updating Standard VGA Graphics Adapter?

That would be helpful x :grinthumb
 

A:Dispay Adapter - Standard VGA Graphics Adapter Update?

Like this one ?
 

5 more replies
Answer Match 60.48%

I am desperate. really really desperate, I don't know what to do anymore

I spent a lot of money on a new gaming pc and it has been a complete nightmare from the start. I have wireless network at home so I had to het a usb wifi adapter, the Netgear N300 WiFi USB Mini Adapter.

Its setup cannot complete because it is stuck eternally at "detecting adapter"



I sought online but it's only people reporting the problem and NOBODY giving a solution. pleas pleeeaaaase somebody help.

A:Netgear N300 WiFi USB Mini Adapter stuck detecting adapter

Power down PC...while it off remove USB wifi adapter....power on PC. When PC has finished booting up, search in the uninstall programs list for any software related Netgear and uninstall it. Reboot and start the process again.

According to the system requirements for that device, it does not support windows 10, which may be you issue.

http://www.downloads.netgear.com/fil...DS_03Jul13.pdf

1 more replies
Answer Match 60.48%

I know there are several threads but they are with different cards and they didn't solve my issue...

I bought a new MEDION AKOYA P5334E and the system arrived installed normally with win7 home edition.

I've installed on the computer the win7 enterprise edition (x64) and many drivers could not be find. I've installed nost of them, except the display adapter.
It's stuck on "standard vga graphic adapter".
I have the AMD Radeon HD7570 card but no matter what I try is not working!!!
tried to uninstall the current driver, tried to download the driver from the AMD website (when executing it - it's running but does nothing).
when executed the auto detect from AMD website, I got the message "we were unable to find your product or OS"

Will be greatful for any help!!!
Thanks a lot!!!
Ori

A:display adapter is stuck on standard vga adapter

Welcome to the Sevem Forums, Oraz.

If you still have the DVD of Windows 7 home edition and if it is also 64-bit then you might find the graphics adapter driver there which might get installed. Otherwise try installing Graphics Card AMD Radeon HD7570 in Windows XP SP3 mode.

Another option is to try installing the Graphics Card AMD Radeon HD7570 that you have downloaded in the safe mode. In case the this driver gets loaded in the safe mode then it shall install too.

1 more replies
Answer Match 59.64%

I am using a DC7900 USDT, I want to upgrade the hard drive with an SSD, I see a connector for PCIe mini cards; Can any one tell me if I can use it to connect a PCIe SSD if so what kind of SSD it has tobe?,  part number & manufacturer of this SSD

A:About the PCIe mini card connector (refer parts & service ma...

Hi, Are you talking abot this:             http://h10032.www1.hp.com/ctg/Manual/c01563108.pdf No, it is not for SSD Regards.

1 more replies
Answer Match 58.38%

Hi  i m DELL XPS 14 L1421X owner. I need flex cable connetor on the hardrive side of the motherboard. Which is connect modher board to sound and msata controller board with flex cable.
I was accidently broken i need new connector to replace bu i didnt find please help me about that
Thanks 

More replies
Answer Match 58.38%

What might I need to know about these if I was asked for the specs of cables and connectors of a computer network?

This is for a college thing...

I know the connectors are RJ45 connectors and the cable is CAT 5, UTP/cross-over cabels. What else might I need to mention?

Thanks for your time and any replies.
 

A:Cable, connector specs

how about speed? they can do either 10 Mbps or 100 Mbps depending on the hub. 10 Mbps only uses the 4 cables on the ends while 100 utilizes all 8
 

3 more replies
Answer Match 57.54%

Hi,

I want to reuse a previously junked machine that has Celeron 600Mhz processor on a Mercury KOB 810FST motherboard. This motherboard (AT) has on-board VGA with a 16-pin connector for it (see attached pic for more info). Sometime ago (like..2 years back), I did a stupid thing by incorrectly connecting the VGA adapter cable (or whatever u call the one that's fixed to the back of the cabinet for connecting to the monitor) to the on-board VGA connector, which burnt the whole cable. Luckily, this motherboard survived without damages (at least so far :haha: ).

Now, I am trying to get this system working again without spending much. A friend got me a new VGA adaptor cable. Problem is... it has got only 15 holes instead of 16 for the 16 pins on the motherboard (see attached pic). How do I connect them?

Thanks
thinktank
 

A:Onboard VGA and Connector Cable problem

Is $25 too much ? - http://www.cyberresearch.com/store/...tor-cables-display-dvi-vga/CPI_VGA_2552.2.htm
 

3 more replies
Answer Match 57.54%

I just picked up a Neoview 17" LCD monitor. It has LOTS of connections ... but none of them are VGA.

It looks like the main video connector is a D shaped and has three rows of 8 pins in it .. PLUS it has three more rows off to the side .. the top and bottom are two pins each and the middle is a flat blade .. I've never seen one of these before and am "sorta" lost.

It came with a male/male cable to match the connector mentioned above. Also, there's a male (connector above) to VGA female adaptor....... but to use the adapter to a VGA video card, I'd need a cable. Is there such a thing as a VGA cable ? ... Any monitor I've ever seen had the cable permanently attached to it.

Anxiously awaiting your respones ..... in the meantime, I'm gonna hook the monitor up to a VCR and see how the video looks (it has RCA video and audio inputs!).
 

A:LCD Monitor Cable/connector question

I'm assuming it has a DVI connection. Flat panels use digital signals. A lot of cheaper/older ones converted analog to digital signals because video cards converted digital to analog. New cards don't all do that. They have a DVI out for digital displays.

Is there such a thing as a vga cable: yes. Is it what you need: i'm not sure. From the sounds of it you have a convertor like a DVI-to-VGA that I've seen before included in cards that have DVI out but reversed. If so you should be able to get a standard 15 pin VGA extension that attaches to the adaptor and to the video card.
 

2 more replies
Answer Match 57.54%

As seen in the image in the top right of the Wikipedia page:
Video-in video-out - Wikipedia, the free encyclopedia
I've been looking for a cable like that to use with Video input, with little success. I have come across a few VIVO cables, but not any with their purpose fulfilled: Video In and Video Out. Does anyone know where I can buy one of these?

A:6-connector VIVO splitter cable

Does your card support VIVO? Check with your card OEM. Surely, they should be able to supply the cord. As shown in the pin-out, they can vary. I have an eight pin that breaks out S-video and composite but it's for my TV card.

Update: After checking your card specs, I assume it's not for that. 'Cause it ain't gonna happen.

8 more replies
Answer Match 57.54%

Hello all, my power supply for my laptop quit working and i am looking for a new one. The input is 120/240, 50/60Hz and the output is 19V & 3.15A. I have found many plugs like this or very close to this with the same voltage and slightly different amperage but I am worried if I buy this over the internet the actual little round connector thing that plugs in at my lap top may physically be too big or too small. How can i determine if I am buying the right one?
 

A:PS adapter connector size

Do any of them claim to be a replacement for your model? Have you searched using either your laptop model number or the power supply part number?

Many of them do use a "standard" size connector, but there are enough proprietary models around that I won't say it will work.
 

1 more replies
Answer Match 57.12%

Have had similar issues with an increasing number of machines, picture below. Please advise

More replies
Answer Match 57.12%

I seem to recall someone mentioning a company that can make just about any cable or connector requested. Does anyone know who I'm talking about or know of any vendor providing this service?

Thanks
B
 

More replies
Answer Match 57.12%

I seem to have this problem frequently - all of a sudden, the AC power chord won't fit into my laptop and I have to replace it....Is there a power chord that is more sturdy and whose plug-in won't easily break off or cease working?

Thanks for any help.

Chip
 

A:Question re Laptop Cable Connector Not Working

7 more replies
Answer Match 57.12%

Hi, from whence can I buy a cable: "643638-001 - CBI HDD CABLE SLAVE", or get  desoldering scheme? Bought from here: "https://ru.aliexpress.com/wholesale?catId=0&initiative_id=AS_20160928114513&SearchText=hp+pavilion+d..." not approached... With gratitude for the response,Valery

More replies
Answer Match 57.12%

I do have a question, if anyone knows any thing about the optiplex GX620 super small system. I have one of these , it does not have an optical drive, it only has a hard drive, which is new and not formatted. I have no way to install an OS on it. I have contacted Dell about 101 times trying to get a cable to connect an optical drive. I bought an Optical drive from them, but it did not come with a cable. I worked thru tech support, gave them the service tag number, they gave me a cable part number to order and I did buy it, but it is wrong, will not connect to the mother board. I have taken the system to several private computer repair shops and they looked at it and said they have never seen an IDE connection like that. So I am lost, Dell does not seem know and no one else seems to know what type of cable I need. It almost looks like some type of daughter card or adapter card would plug onto the IDE connection to allow a normal IDE ribbon cable to connect. It really looks like a connection you would see on the outside of a system, not on a mother board. Since it only has that one wierd connection I was thinking the adapter card would have a splitter so I could install a optical and a Floppy drive to it. But for now it is a door stop. I can get a picture of the connector on the mother board, but Dell tech does not work that way, so they will not help. Any Idea where I could go from here. If I could find a good manual or parts list I would have a better shot. Anyway, Thanks in a... Read more

A:Can't Find an Optical Connector Cable For a Dell

Attach a picture, the one I am looking at on Dells product details site shows a connector at the bottom left on the motherboard and a second directly under the power supply connector.
 

2 more replies
Answer Match 56.7%

Hello, hi, I hope someone can help me too.

I have an external hard drive that no longer works. I have taken out the hard drives from the enclosure (there are actually two 500gb SATA hard drives inside, but the computer reads them as one 1tb drive) and they can be read by an external dock that I already own (so I know that the hard drives still work at least).

My problem is that because of how the drives worked inside the enclosure they originally came with, the data is spread across both drives meaning I can't open or move the vast majority of it, because I can't connect both drives at once.

Does anyone here know of an adapter, or dock, or cable or converter that would allow me to connect both drives, but most importantly, have read the computer read them as one drive? I've found docks that have two slots, but I can't find any confirmation that these would read two drives as one. Is what I'm looking for even a thing?

Thanking you in advance.
 

A:Twin (2) SATA Adapter/Connector

Some pics would help..........
 

1 more replies
Answer Match 56.7%

Hi, I am on vacation and forgot the adapter for my Latitude. My husband has his adapter for his Thinkpad. But, the connector is too big. Is it possible to buy and adapter to put on his charger so that I can charge my laptop?
 

A:Solved: adapter for charger connector

7 more replies
Answer Match 56.28%

Hi there, I've repaired a broken Lenovo "U410 Touch" with "U410"-parts (LCD, backcover, hinges, and front bezel had to be replaced). Everything went fine, but there's still the loose, ripped up cable that was already loose before my repair.I see only two options for the cable: the white 2-pin socket "CN21", where I couldn't find out what should be connected there, or the 2nd antenna-cable. But the cable does not really look like an antenna cable, it seems to have no shield. Please help me identify the cable or the connector. I've searched a lot for images, no luck.  You can see the large LCD-connector for orientation:??

More replies
Answer Match 56.28%

My motherboard has 3 IDE channel/ports. One is for the floppy disk, the other for the CD drive and the 3rd one is for the hard drive. I plan on upgrading my hard disk, and I plan on cloning my old drive. For this I need to install the new drive as a slave drive. However on recent inspection I've noticed that the cable connecting my hard drive cable to the IDE port has no extra connector where the slave hard drive can be connected. However on the CD drive cable there is a spare connector.

Am i supposed to get a new cable with a spare connector for my hard drive cable, or can i place the slave hard drive on the spare connector for the CD cable. Really need advice, thanks.

P.S. can the ide cable suffer from ESD?
 

A:No spare connector on HDD cable - where am i to connect the slave drive?

If you're buying a retail package it will probably come with a cable that you can replace your single port cable with. If not, you can make the new drive the slave and plug it into the second connector on the cable with the CD. Then after you clone it change the jumper to master and replace the old drive with the new one on the existing cable.

OR, swap the two cables in there now, so that the CD has the single connector cable and the HD has the dual connector cable, plug the new drive in as a slave and clone away.

Not sure is the IDE cable can suffer from ESD but the other components you'll be working near can, so I would have on a wrist strap anyway and that would eliminate the possibility.
 

1 more replies
Answer Match 56.28%

Chennai, INDIA where can get hard disk cable connector for HP Pavilion DV6-7010tx model laptop











Solved!
View Solution.

A:hp pavilion dv6-7010tx hard disk connector cable

HiSATA connector cable comes as part of hard drive kit.HP part number: 682063-001 for hard drive hardware kit compatible in your model.Go through page 27 in this manual:http://h10032.www1.hp.com/ctg/Manual/c03582006.pdfhttp://m.ebay.com/itm?itemId=231308699162RegardsVisruth

5 more replies
Answer Match 56.28%

I am partially computer literate, but not knowledgeable about the deep things of computers.
However, I am trying to keep as up to date with things as I am able. One thing I am trying to get a handle on is USB-C and USB 3.1. I have read there are many bad quality USB-C cables out there, courtesy of Google engineer Leung Benson and others, but have been trying to get hold of a USB 3.1 cable that I could use.
Having misunderstood exactly how the USB-C fits, I bought these cables by PThink:
click here I have no devices with a USB-C socket! I only have micro-USB socket.
So I trawled the net for some kind of adapter, and found only 4 items. I settled on this by Seenda:
From eBay: "Type C USB-C Female to Micro USB Male Adapter Converter Connector For Huawei LG"
Is there anyone out there who can comment on these cables please?
Karsten T
But

A:Adapter, connector, USB-C female, micro-USB male ?

It is supposed to say "But I have no devices with a USB-C socket!"
And of course any comments about the connector/s would also be great!
Karsten T

4 more replies
Answer Match 56.28%

I have 2 places for monitors on the back of my Nvidia 8800 graphics card, it came with one adapter that you can hook a monitor up to, but don't have a second adapter for the other slot. Where can I get one of these? What is it called?
 

A:Where can I get monitor adapter/connector for Nvidia 8800 GTS?

DVI to VGA adapter: How hard can it be to find such an adapter for a cheap price and not being butt-ugly? I guess this would be the right one: http://www.newegg.com/Product/Product.aspx?Item=N82E16814999201
 

1 more replies
Answer Match 55.86%

I have a HP Split X2 Model 13-m110dx.  I replaced the LCD/Digitizer assembly, which required I remove all hardware from the display assembly.  My question focuses on the cable that connects the motherboard to the audio/HDMI/Dock board (item 7 on page 17 of http://www.hp.com/ctg/Manual/c03958968.pdf).  The cable of interest is the left one (with a 45 degree bend in it), and how it connects at either end.  A pic is below with the cable (yellow/gold). My question:  Is this a ZIF connector or do I need to lift up the front to release it?  A portion of the gray part of the connector broke off when I tried to lift it, assuming it was a clamp style ribbon cable connector.  The other end of the cable connects to the Motherboard with the same type connector.  I pulled that one out, but it's unclear if that is damaged if I did that wrong. Problem:  The HP Upgrade/Parts manual doesn't define how to disconnect these cables.  After reassembly, the keyboard/dock no longer connects, so what I have now is a standalone tablet w/o any USB ports or keyboard.  I ordered a new audio board in the hopes that resolves the issue. Anyone have any input on this? 

More replies
Answer Match 55.86%

Hello,
I just installed Windows 7 RC1 32-bit OS onto my laptop. Without thinking i needed any drivers, i went to play World of Warcraft. It told me that it could not locate a display device and wouldn't work. I figured i needed to install my grpahics card drivers for my Nvidia 9 series card. When i went to install the drivers, an error message appeared saying that it could not locate drivers compatible with my device. I went to dxdiag and under display it shows that i have a standard vga adapter and won't recognize my actual graphics card. I'm not sure if i'm missing drivers, i haven't installed anything else except for this attempt at installing the nvidia driver. Please assist, thank you.

A:Standard VGA Adapter

Try windows update, failing that try Nvidia.

5 more replies
Answer Match 55.86%

i had installed windows 7 ultimate in my laptop i thought everything will be alright but the aero and glass effect of windows did not work so i tried to know the problem and i founded out that the video card driver says standard vga adapater but i currently have a nvidia video card, the problem is i dont know the complete name of my video card, i just rememberd nvidia something..can you help me find the complete name of it so that i can download its driver.(i have toshiba a200)

A:standard vga adapter

You have a GeForce Go 7300! You can download the driver here Let me know how you go.

1 more replies
Answer Match 55.86%

AFTER REINSTALLION  MY HP PAVILLION G6-1060SE  SHOWING  2 STANDARD VGA ADAPTER BY INSTALLING INTEL HD GRAPHICS  1 OK THE OTHER ONE I TRIED TO INSTALL AMD 670M GRAPHICS DRIVER INSTALLATION SUCCESSS BUT DEVICE MANAGER STILL SHOWING STANDARD VGA ADAPTOR.  ANY SOLUTION FOR THIS

A:STANDARD VGA ADAPTER

Hi, For your particular switchable graphics configuration, you should only need to install the AMD software package on the following link - this will provide both the Intel/AMD drivers along with the customized catalyst control centre that enables switching between the GPUs. http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55025.exe Regards, DP-K

1 more replies
Answer Match 55.86%

So, i had this problem afther installing Windows 7 into my computer, Most people have this problem, But when i go to device manager and when i go to display adapters i keep seeing "Standard VGA Adapter". Its really annyoing, Because im like a gamer and like to play games on the computer. Heres the report of the dxdiag (Since it tells information)
DxDiag :
Operation System : Windows 7 Ultimate 32-bit
System Manufacturer : Tosinv
System Model: SB600
Bios: BIOS Version 1.00
Processor: AMD Turion 64 x2 Mobile Technology
Display:
Name: Standard VGA Graphics Adapter
Manufacturer: ( Standard Dislay Types)
Chip Type: ATI ATOMBIOS
Monitor: Generic PnP Moniter


So i need help like ASAP!!
Thank you for helping

A:Trying to get RID of Standard VGA Adapter

First, you're going to have to help us figure out what a, "Tosinv" is? Where did you buy the machine? What's the make and model number?

Googling Tosinv doesn't lead me anywhere... and (just a guess), there is no SB 600 on Toshiba's site.

What are we dealing with?

5 more replies
Answer Match 55.44%

I have removed the hard drive from my laptop because it won't load and the laptop cannot see the drive.
I bought a universal SATA/IDE usb connector cable but it didnt fit.

I want to see if the hard drive still works by plugging it into another laptop via usb,
pics attached

many thanks

A:which usb adapter/connector will fit my Toshiba HDD2J95 hard drive

hi something like this should work for you. BYTECC BT-300 Adapter - Newegg.com

2 more replies
Answer Match 55.44%

Well, can a standard RCA cable carry the digital signal from S/PDIF from my computer to my receiver?
 

A:Can a standard RCA cable carry S/PDIF?

Yes and No.

SPDIF is a 75ohm signal. Not just any generic RCA cable will be able to correctly carry such a signal.

Shorter, higher quality RCA cables designed for video can sometimes "pull this off", but it's just because the shorter link length or higher quality can carry a 75ohm signal.

RCA only specifies the connector, by the way. So there are indeed "RCA" cables designed for SPDIF signal- they are just designed with higher quality conductor able to carry a 75ohm signal reliably. Most generic, cheap, audio RCA cables- no way. Might work for testing purposes, but I wouldn't recommend for permanent use. Get a good quality, 75ohm rated, shielded RCA to RCA cable designed for SPDIF.
 

2 more replies
Answer Match 55.02%

To all Dell XPS 15 (9550) customers:  
Dell product management / production made a major error with XPS 15 9550.  Believe it or not, if you ordered one without a built-in hard or SSD drive (because an SSD card is included), the standard drive cable, connector and drive bumpers / rails are missing. Here are the Dell part numbers:
    XDYGX - Cable, Hard Drive, SATA 7MM
    3XYT5 - Grommet, Hard Drive, Rubber
This gets better.  If you then order a hard drive or SSD upgrade directly from Dell, the missing cable, connector and bumpers ARE ALSO MISSING!
Here is what the drive parts look like, from Dell's service manual:
      
I discovered this screw-up today when my new XPS 15 arrived, Next Day Air, for a major project.  I opened the case to install more RAM and an SSD drive -- and discovered the missing parts.  So I contacted Dell Support.  A very helpful CSR told me that the earliest Dell could deliver the parts was two weeks out.  I offered to pay for Next Day Air.  Nope, still two weeks.  I ended up ordering the parts via Amazon for $80, not including Rush shipping.
I Googled this issue and found lots of unhappy Dell XPS 15 customers in the same boat.  This failure was definitely bad for them, and for Dell's reputation.  Dell should clearly step-up and (a) solve this problem on all new XPS 15 systems, (b) offer quick parts delivery to desperate customers, and (c) i... Read more

More replies
Answer Match 55.02%

Hello. I put Windows 7 on my friends computer since he wanted me to, so I installed it. But there was one problem. His resolution is stuck at 640x480. It said he is running from a Standard VGA Graphics Adapter. His computer is fairly old, but all of the hardware is pretty good except for the video card. I brought him my old 7700 GTS for him to use for the time being, but I cannot install the drivers for it, and the computer still says he is running Standard VGA Graphics Adapter.

A:Standard VGA Graphics Adapter

first try a driver uninstaller, I don't know any generic ones but i'm sure either somebody can post that or you can google it. if that doesn't work off the bat try the following....

uninstalling in devmgmt (do not delete driver files) and then run driver install as administrator. if that doesn't work try the same thing in safe mode. If that doesn't work try clearing cmos and then installing drivers. though if you clear cmos you might have to manually set it up or do optimized configuration.

2 more replies
Answer Match 55.02%

I have a Nvidia 8600m gt 256mb card, but on the display box, it said I'm using a "Generic non PnP monitor standard vga graphics adapter". Sorry I'm not very computer savvy. What is wrong with my card?

A:Standard VGA Graphics Adapter?

  
Quote: Originally Posted by bao


I have a Nvidia 8600m gt 256mb card, but on the display box, it said I'm using a "Generic non PnP monitor standard vga graphics adapter". Sorry I'm not very computer savvy. What is wrong with my card?


Probably nothing. You just need a driver for your card from Nvidia.

3 more replies
Answer Match 55.02%

Hello, this is my first post here :P I need some help. I play minecraft, before i installed windows 7, i used windows XP (My computer was originally designed for XP) I could play minecraft fine, but now it says "Bad Video Card Drives!" It told me to update them, it's already up to date it told me. I have no idea what i can do to fix this.... i think i had something like intel graphic cards before updating, but i'm not 100% sure. If someone can help me, that would be great. I Really miss killing creepers in minecraft :P

A:Standard VGA Graphics Adapter Help.....

Please fill in your System Specs.

9 more replies
Answer Match 55.02%

i have upgraded to windows vista ultimate from the home basic and when i try to run some programs it says my hardware acceleration is turned off i had no problem with home basic. also i cannot find out what make of graphics card i have on my laptop in device manager it just says 'standard VGA graphics adapter'.............................anyone have any ideas????

many thanks

Ashley
 

A:Standard VGA display adapter

You didn't mention what the make and model of your laptop is. We need this info to help with this. We are not standing right next to you. We cannot see this laptop.
 

13 more replies
Answer Match 55.02%

This is the reason I can obviously, NOT RUN DIRECTX 10!!!.



My computer is running the Standard VGA Graphic Adapter, which makes DirectX 10 unable to access all its features! (DirectDraw Acceleration, Direct3D Acceleration, AGP Acceleration.)

This is what's up.. --

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: Standard VGA Graphics Adapter
Manufacturer: (Standard display types)
Chip type: NVIDIA
DAC type: 8 bit
Device Key: Enum\PCI\VEN_10DE&DEV_06EB&SUBSYS_024F1028&REV_A1
Display Memory: n/a
Dedicated Memory: n/a
Shared Memory: n/a
Current Mode: 1280 x 800 (32 bit) (1Hz)
Monitor:
Driver Name: vga
Driver Version: 6.00.6001.18000 (English)
DDI Version: unknown
Driver Attributes: Final Retail
Driver Date/Size: 1/20/2008 19:24:50, 10752 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71E3E-45AB-11CF-C835-3E350EC2CB35}
Vendor ID: 0x10DE
Device ID: 0x06EB
SubSys ID: 0x024F1028
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel:
Deinterlace Caps: n/a
DDraw Status: Not Available
D3D Status: Not Avail... Read more

A:Standard VGA Graphic Adapter

What is the actual model of Nvidia card? Based on that, have you manually tried installing the WHQL forceware drivers from nvidia's website for your GPU series?

Also, is your OS 32-bit or 64-bit?
 

6 more replies
Answer Match 55.02%

Hi,

I have recently formatted my harddisk and reinstalled windows 98SE. I nolonger have the CD's or floppy disks that contain display drivers or grahic adapter drivers. I am trying to change my screen resolution from 16bit colour 640x480 to
256 colour and 1024x768 resolution - I dodn't have the option to do this.

My graphic files are very hazy. I assume that I have to re-install my video/graphics card drivers.

Can anyone please tell me how I can find out what type of video/graphics card I have and if I can download the drivers I require off the internet.

Many thanks for your assistance.

Regards
Andrea
 

A:Standard PCI Graphics Adapter (VGA)

<HTML><BODY><STRONG>
<FONT face="Comic Sans MS" color=navy size=2>Hi Andrea...
</FONT></STRONG><STRONG>
<FONT face="Comic Sans MS" color=navy size=2>The best way I know of to find out what kind of cards your computer has is to open the case and look. Another way is to go to the web sight of your particular brand and model of computer. Many times the drivers you need are right there. And you can also put your brand and model directly into your search.</FONT></STRONG>
<STRONG>
<FONT face="Comic Sans MS" color=navy size=2>After finding the type of cards you are using... the best sight I have seen to pick up a driver is: DriversGuide.com - http://www.driverguide.com/
</FONT></STRONG>
<STRONG>
<FONT face="Comic Sans MS" color=navy size=2>Good luck
</FONT></STRONG></BODY></HTML>
 

1 more replies
Answer Match 55.02%

After reinstalling windows vista OS 64bit on my dell studio xps 1640, I reinstalled all the drivers that were on dell resource cd that came with my laptop. On my device manager there is still a yellow triangle with an exclimation mark next to Standard VGA Graphics adapter. I used to be able to use 1920x1080 screen resolution; however, the highest option now is currently 1400x1050 pixels and it reads default monitor on display settings instead of having HD Radeon 4670 option as it did before. My grahpics card is a radeon HD 4670. Could anyone possibly tell me what drivers I would need to download and install in order to get my screen resolution back to 1920x1080 and resolve the VGA adapter problem? I have gone to the dell driver website; however, the standard vga graphics adapter does not seem to be under the video drivers? thank you for your time and help guys >.<
 

A:Standard VGA Graphics Adapter??

9 more replies
Answer Match 55.02%

hi,

can anyone help? i have an e-system 1201 laptop and i want to use an external monitor for an extended desktop, but cant seem to get it to work.

thanks
anthony
 

A:Standard VGA graphics adapter

There should be a Fn key that will activate the external display. Look carefully at the top row of keys for a symbol that looks like a monitor screen. Press the Fn and that key at the same time
 

1 more replies
Answer Match 55.02%

Hi, I updated my computer to Windows 7 home and now my Resolution only has 640x480 I have a Dell. model is DE051.. please help if you can.
 

A:Standard VGA graphics adapter

Is your PC a Demension 1100 (DE051)?

Did you update to Windows 7 64-bit operating system?

Can you remember if your graphics driver was Intel, nVidia, or Ati?
 

5 more replies
Answer Match 55.02%

hello...
im having a problem on my Vista...
my display adapters on DEvice manager has a (!) sign...
i cant update my
Microsoft Windows Standard VGA Adapter version 6.0.6000.16383
6/21/2006
please teach me were can i download the driver...
i hope someone teach me to resolve this..
thank you sooo muchh...

A:Problem on my Standard VGA Adapter.....

Hello nicoyerel,
Go to your manufacturers site and download from there.
Also, can you please give some system specs. thanks.

6 more replies
Answer Match 55.02%

My grandson who was in Iraq has an Alienware laptop which has Vista 32 bit installed.

He gave it to his dad and there seems to be some problem The Processor speed is like 5.5, the Mem. ram is 5.1, Graphics is 1.0 and Disc is 5.8, I am looking into this and I was wondering why I am unable to install the GeForce Program? My real question is, is the GeForce Graphics card in the puter or is the Standard VGA Graphics Adapter actually a very slow card and someone has taken the GeForce card out?

A:Standard VGA Graphics Adapter??

What laptop?

Some have dual gpu's.. the onboard intel on associaed with the cpu, and a dedicated on like a nvidia or amd/ati.

Its a power savings type thing, where in low graphics/power saving it'll run the intel and gaming runs the dedicated.

Theses tye of systems requires the driver to come from alienware/dell.

10 more replies
Answer Match 55.02%

I have a Dell Studio 1537 and i have completley reinstalled windows vista and after the screen was a bit stretched. I turned the resolution to the highest and made sure the colours option was at 32bit. This helped and shrunk the screen a bit but now it is still a little bit stretched and the image is not as sharp as it used to be. How can i get it back to its origional format? Please help.

A:Standard VGA Graphic Adapter

Under drivers my "Standard VGA Graphic Adapter" has a yellow triangle with an exclamation mark through it. What can this mean?

9 more replies
Answer Match 55.02%

Hi, I just installed Windows 7 Professional 64x. Previously, I had 32-bit Vista Ultimate.

I have a Dell Precision M90, with 4 gigs of ram, a 2.00 GHz core duo processor, and a Nvidia Quadro FX 2500M video card.

In the device manager, my display adapter shows as Standard VGA Graphics Adapter. I'm decent with computers, so I've upgraded video card drivers before. However, for some reason it is not allowing me to upgrade this driver. I have tried with both a 2500M driver as well as a 7900GTX driver (which worked for me in Vista).

I have also tried uninstalling the driver first, but it won't let me install another one before restarting and when I restart it just reinstalls the Standard VGA Graphics adapter. Any help would be greatly appreciated. Thanks!

A:Cannot get rid of Standard VGA Graphics Adapter

Welcome to the Forums! I couldn't believe how much easier it is to read a post that is capitalized and punctuated correctly!
Have you tried installing the drivers in Safe Mode?

9 more replies
Answer Match 55.02%

So my father had to reinstall his OS due to it running slow. we went to W7 Home Basic.
Since then And have had a problem with his card. i have no idea in anyway what graphics card he has. if any one can help me locate a driver for my father whould help so much.
is there any information i need to paste for you guys to help me?
im sure its Nvidia, but its a very old machine so i have no clue.
any help appreciated! so my father can stop complaning about how big the resolution is. :P

cheers,
Daniel!

A:Standard VGA Adapter Help - Much Appreciated.

Please help!

3 more replies
Answer Match 55.02%

I saw an earlier thread where ppl were getting help with locating their graphics card driver after installing w7 and I was hoping someone could help me.

I right clicked on the vga adapter through to hardware ids and copied this hoping this would give the information needed.

Hope your feeling as generous as before there bigfella!!!!!

PCI\VEN_10DE&DEV_06E8&SUBSYS_C04A144D&REV_A1
PCI\VEN_10DE&DEV_06E8&SUBSYS_C04A144D
PCI\VEN_10DE&DEV_06E8&CC_030000
PCI\VEN_10DE&DEV_06E8&CC_0300

A:Standard VGA Graphics Adapter

I come up with a Nvidia 9200m graphics card. You can also try using this program to help with filling in your system specs. Speccy - System Information - Free Download

If your locking for the driver for it I would first try the manufacturers site since they sometimes modify the .inf file and it can cause you problems when trying to install the one directly from Nvidia

Drivers - Download NVIDIA Drivers

If you have any problems installing the driver the normal way by clicking on the setup.exe file, then post back.
Their are other ways to get it installed.
Fabe

9 more replies
Answer Match 55.02%

Hello guys, I've posted here about something similar to which I solved thanks to your good help But now there's something I need to clarify. My PC, back in October had a incident that I don't want to go over which caused my repairer to replace the Graphics card. I lost Aero (simulating it now with Transbar and TrueTransparency). What boots up when I start the PC shows the card as: SIS True Color 16 Bit PCI or some stuff life that.. I downloaded CPU-Z and put my latest specifications in my system specs.. so click em! See if you could help me verify the graphics driver or anything, the previous one was a NVIDIA GeForce one. It also shows my monitor as Generic PnP

A:Standard VGA Adapter problem.

Hi IngestedFool, I thought you had solved this problem when you switched cables ? The SIS card you have is only 16bit meaning it will not support aero which needs directx 9 and above I personnally think its time for a new later model of GFX card that will support aero , Is there anywhere else you acn go to purchase from and not the same person who put the older GFX card in for you ?

9 more replies
Answer Match 55.02%

Hey all, I just finished a clean install of Windows 7 and now my graphics card is unread by windows. I had this problem before and I was able to fix it, but this time my card is an ATI Radeon. I know I have to have a modified .inf file, but I don't know how to do that.

Here is the information on my laptop:
Model: Sony Vaio VPCEB390X
OS: Win7 x32
Graphics Card: ATI Radeon 5650 (not 100% sure though)

How do I get the correct driver install?

Thanks in advance!!

A:Standard VGA Graphics Adapter!!

If i am understanding your post correctly, I would download Speccy and verify your card model number, after that its simply a matter of going to ATI's driver download webpage here and choosing the correct driver for your card.

6 more replies
Answer Match 55.02%

Sorry I'm not that good with computers but here goes.

My Computer was working fine until it stopped working then i had to reinstall windos 7. Everything was working fine before but now my graphics adapter is Standard VGA Graphics adapter. Please help!!!

Model: Alienware m15x
OS: Windows 7 Professional x64
And i'm not sure about my graphics card. I downloaded Speccy and all it said was
Graphics: Generic PnP Monitor ([email protected])
16MB Standard VGA Graphics Adapter (Dell)

A:Standard VGA Graphics Adapter

It seems that that laptop came with a nvidia graphics card.
Can you check the Dell website for drivers:
Product Selection | Dell United States

9 more replies
Answer Match 55.02%

Hi

I have an Acer Aspire 8930G. It's GFx card died a year or so ago, and I just bought a new one, a NVIDIA GeForce 9600M GT DDR3 MXM II, from eBay.
When my laptop worked, it had Vista installed. So naturally I upgraded to Windows 7 Ultimate.

Now windows 7 has been installed, all updates been installed. All but one. the nVidia driver.

I can't seem to install it. I have searched the net for solutions. Found some, but couldn't go on.
Fx. tried to add some lines in the drivers .inf files. Put a line with my hardwares ID, but my hardware lacked some digits.

Anyways... I'm stuck with standard VGA graphics adapter. Today's the sixth day on trying to find a solution, and I'm about ready to boil my balls just to feel anything else but frustration.

Can anyone please help me?

A:Standard VGA graphics adapter

You may want to try using the driver from the Acer site.
Download

9 more replies
Answer Match 55.02%

I saw an earlier thread where ppl were getting help with locating their graphics card driver after installing w7 and I was hoping someone could help me.

I right clicked on the vga adapter through to hardware ids and copied this hoping this would give the information needed.

Hope your feeling as generous as before there bigfella!!!!!

PCI\VEN_10DE&DEV_06E8&SUBSYS_C04A144D&REV_A1
PCI\VEN_10DE&DEV_06E8&SUBSYS_C04A144D
PCI\VEN_10DE&DEV_06E8&CC_030000
PCI\VEN_10DE&DEV_06E8&CC_0300

A:Standard VGA Graphics Adapter

Nvidia 9200M according to here,

LAPTOP Magazine - Product reviews, tech news, buying guides, and more

which matches up with the DevID. Have you tried the Windows 7 driver for it from Samsung?

Samsung

Click on "Get downloads" and then scroll down to the Windows 7 drivers, they have both the 32 and 64 bit available.

1 more replies
Answer Match 55.02%

Hi there,

Just done a clean install of windows 7 on my Sony VPN-SZ5VWN and it has installed all drivers apart from the display.

It has a nVidia Go 7400 however when I try to install it it just states there is no nividia products.

If I try to uninstall the VGA driver, it asks me to restart and then, before I can do anything, it reinstalls the standard VGA adapter driver. I do get a solution saying to download the driver however this does not work.

The original drivers are for Vista and Sony provides no other supported OS for them.

Please help!

Thanks,

Tom

A:Standard VGA Graphics Adapter

Hi TomCollins, Welcome to the forums , Revisit the Sony website and download the vista drivers ,install them in compatibility mode Compatibility Mode They will run perfectly fine on win7

3 more replies
Answer Match 55.02%

Hi everyone,

I cruised around the forum trying to find a solution that worked for me but I couldn't. Here's the situation:

I formatted this computer (was running Vista) and installed 7 (x64). But now 7 isn't detecting my video card properly.

I've tried running EVEREST and so on, but haven't gained any hints that way. It's an onboard videocard and I can't make out any identifying characteristics that have been helpful so far. I've tried updating the motherboard but obviously that wasn't any help.

Now, I originally updated this beast from XP to Vista and recall having a similar problem. Somehow I figured out the card required a driver from Chrome (Welcome to S3 Graphics - Create world-class graphics and video cores).

I tried installing the 500 series driver for 7x64 but it doesn't seem to have taken. I fiddled with device manager but it is refusing to change from Standard VGA Adapter. I tried installing the 400 series but it gave me a hardware error which suggests I was on the money for it being 500.

Is there a way to force device manager to accept the 500 series driver? It didn't give me an error or anything and I'm pretty sure it's what I want -- positive, even.

I've included a pic of the inside of the computer (kind of useless?) and can attach an EVEREST diagnosis if anyone likes.

thanks,
James

A:Standard VGA Adapter, Sigh

Thats a Asus P5VD2-VM SE motherboard It has a VIA Chrome9 HC IGP Display Driver .... try over here pal ASUSTeK Computer Inc. -Support- Drivers and Download P5VD2-VM SE

5 more replies
Answer Match 55.02%

Hi, I updated my computer to Windows 7 home and now my Resolution only has 640x480 I have a Dell Dimension 1100/B110 . model is DE051.. please help if you can. I went to dell support but they have no drivers for Windows 7

A:Standard VGA Graphics Adapter

Has it "Integrated Intel Extreme Graphics 2" as graphics card?
Open device manager. Expand video adapters. Double click on your video adapater. Clcik tab Details. I want to know the hardware-id.

7 more replies
Answer Match 55.02%

PCI\VEN_1106&DEV_3108&SUBSYS_81291043&REV_01
PCI\VEN_1106&DEV_3108&SUBSYS_81291043
PCI\VEN_1106&DEV_3108&CC_030000
PCI\VEN_1106&DEV_3108&CC_0300

^^ Theres my Hardware ID in Device manager for "display adapter"

Could you tell me what driver i have to download ?

Thanks

A:Standard VGA Graphics Adapter

  
Quote: Originally Posted by TrickyMicky


PCI\VEN_1106&DEV_3108&SUBSYS_81291043&REV_01
PCI\VEN_1106&DEV_3108&SUBSYS_81291043
PCI\VEN_1106&DEV_3108&CC_030000
PCI\VEN_1106&DEV_3108&CC_0300

^^ Theres my Hardware ID in Device manager for "display adapter"

Could you tell me what driver i have to download ?

Thanks


Welcome to the forum,

How about filling in your system specs,

System Info - See Your System Specs

That is going to help a lot more than hardware ID's.

6 more replies
Answer Match 55.02%

hi all,

My laptop model is HP pavillion DV6602AU. there was some problem with my laptop so had to change the motherboard so a new display driver is used and its details are as given below.

---------------
Display Device
---------------
Card name: Standard VGA Graphics Adapter
Manufacturer: (Standard display types)
Chip type: NVIDIA
DAC type: 8 bit
Display Memory: n/a
total available graphics memory:64MB
Shared Memory: n/a
Current Mode: 1024 x 768 (32 bit) (1Hz)
Monitor Name: Generic Non-PnP Monitor
Driver Name: vga
Driver File Version: 6.01.7600.16385 (English)
Driver Version: 6.1.7600.16385
Driver Model: unknown
Driver Date/Size: 7/14/2009 04:55:51, 10752 bytes
WHQL Logo'd: Yes


I have installed win7 but im not able to view any aero effects. can anyone please tell me wat is the problem and how to repair it.
when i try to play a game i get an alert message stating that--"hardware acceleration is disabled or not supported by ur card driver" and when i play games the resolution of the screen is very very bad.
Please help......
 

A:Standard VGA Graphics Adapter

What kind of games are you trying to play?

The laptop you have I think uses the NVIDIA GeForce Go 7150M Graphics Chipset. This onboard chipset will not enable you to play most modern day 3D games.

As to the Aero effects, these are the minimum system requirements:

1. a 1 GHz 32-bit (x86) or 64-bit (x64) processor
2. 1 GB of system memory (512MB sometimes works)
3. a DirectX 9 compatible graphics processor with a Windows Display Driver Model (WDDM)driver, Pixel shader 2.0 in hardware, and a minimum of 128 MB of Video RAM
32 bits per pixel
4. 40 GB hard drive with 15 GB free space
5. DVD-ROM Drive
6. Audio output and Internet access (preferably broadband)

Here is a review on your IGP.
 

1 more replies
Answer Match 55.02%

Hello, I am new to this forum. I have been searching for days and tried everything to fix this problem. I was trying to play a game and once i opened it it said Failed loading OpenGL 1.2 [UGraphic.Initialize3D. On my old computer all i needed to do was to go to device manager and update my graphic card but since updating to window 7 i havent been able to see my graphic card and just says standard vga graphics adapter. I have speccy install and ready to give any information to fix this problem. once again i would really appreciate any help thank you.

A:HELP!!! standard vga graphics adapter Tried everything

Welcome to the forum. I am trying to find information on your computer. Is your computer a laptop or a desktop? Have you tried http://global-download.gateway.com/F...rDetection.exe to determine what display card you have in your system?

9 more replies
Answer Match 54.6%

Hello,

I want to renew about 15 Connectors in our Firm's network. We have old unshielded Cat5 cables going through the building. Can I buy these connectors, although they're shielded?

http://www.eshopcy.com.cy/show.phtml?id=PER.751543

Or do I have to buy the more expensive unshielded model:

http://www.eshopcy.com.cy/show.phtml?id=PER.750141

This'd be the crimping tool:

http://www.eshopcy.com.cy/show.phtml?id=PER.569647

I'm a beginner in connecting RJ45 Connectors. This is why I ask in order to be on the safe side.

Thank you very much for advise.

Regards,
Andreas
 

A:Solved: Connecting an unshielded Cat5-cable with to shielded RJ45 Cat5e-connector

The data connections are the same on both.
The CAT 6 you want to buy has better conductors anyway,
as it is designed for higher frequencies.
You just don't have the outer shield web in the cable for it to clamp to.
Won't hurt anything.
 

3 more replies
Answer Match 54.6%

hi all how can i fix this issue, details are:

Description
Windows was able to successfully install device driver software, but the driver software encountered a problem when it tried to run. The problem code is 10.
Problem signature
Problem Event Name: PnPDeviceProblemCode
Architecture: x86
Hardware Id: PCI\VEN_1002&DEV_791F&SUBSYS_FF501179&REV_00
Setup class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
PnP problem code: 0000000A
Driver name: vgapnp.sys
Driver version: 6.0.6001.18000
Driver date: 01-21-2008
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 2057
Extra information about the problem
Bucket ID: 188175687


thanks.

A:standard vga graphics adapter problem

if it is not the latest driver for the chipset, go to the manufacter website and download them and than try to install.

1 more replies
Answer Match 54.6%

so the story is I had to get my laptop fixed for overheating and this laptop used to be able to run Starcraft 2 and any game for that matter and now it can't run any game at all. and I was searching around about my graphics cards and stuff and then I found these 2 things which it says I have and I am 100 percent sure I never had those. I don't really know what to do so I am wondering if I can download a graphic card for this or anything that will help me play games again on this laptop.

------------------
System Information
------------------
Time of this report: 7/8/2011, 09:23:32
Machine name: MITHUL-PC
Operating System: Windows Vista? Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.101014-0432)
Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
System Model: Satellite L505D
BIOS: InsydeH2O Version 1.00
Processor: AMD Athlon(tm) II Dual-Core M300 (2 CPUs), ~2.0GHz
Memory: 2812MB RAM
Page File: 1332MB used, 4537MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
DxDiag Version: 7.00.6002.18107 32bit Unicode

---------------
Display Devices
---------------
Card name: Standard VGA Graphics Adapter
Manufacturer: (Standard display types)
Chip type: ATI ATOMBIOS
DAC type: 8 bit
Device Key: Enum\PCI\VEN_1002&DEV_9713&SUBSYS_FF1F1179&a... Read more

A:standard vga graphics adapter/ATI ATOMBIOS

Welcome
I dont know what you had or if we can improve on what you do have, but the graphics adapter is a driver. You can go to the ATI website and have them scan your computer for what you need.
AMD Graphics Drivers & Software

29 more replies
Answer Match 54.6%

I have searched EVERYWHERE and read all threads and articles on this subject to no success. Most of the time the answers are 'install new drivers' or 'manually install drivers through driver > update " but I can't do either of these things.

After fresh install of windows 7 64bit sp 1 on a toshiba satellite s855d-s5253, I was going to install drivers as usual - I came across the display driver as "Standard VGA Graphics Adapter" - So I thought, okay so I just have to update and install driver for AMD Vision A10 ( It is a ATI Radeon HD 7660G). I know this is the right card, I used AMD Catalyst auto detect, I googled hardware ids, And also I remember this card from before I had to format the computer. I used an official windows 7 install disc, as well.
When it comes to trying to uninstall the driver, it always reinstalls itself as soon as I turn the system on - I have tried disabling automatic device installation to prevent this to no success.
And when I try installing the Catalyst stuff it ends up giving me a message like "graphics adapter not supported" or could not install because of the graphics adapter, etc. Basically I am trying to reinstall the drivers and its only picking up standard vga graphics adapter? not the Radeon HD 7660G. But it is definitely there. Have also tried safe mode....
I really am at a loss at what to do, this is really a pain as I cannot load any games on the computer!
 

A:Cannot solve Standard VGA Graphics Adapter

7 more replies
Answer Match 54.6%

Okay so i keep having this problem where my Standard VGA graphics adapter wont run it says its up to date on updates but i want to manually find an update and update it myself but i dont know where to find it.


I have a

ASUS K53TA-BBR6 AMD A6-3400M Quad-core (1.4GHz - 2.3GHz)


please help :[
 

A:Standard VGA graphics adapter (Code 10)

Can you say what your PC is? Make/model ?
Which Windows version are you using?
If you are not sure exactly what the graphics are then you can download this small program to give you info about it.
http://download.cnet.com/GPU-Z/3000-2094_4-10788513.html
You will need to visit the makers website to download the correct driver, when you have the information.
 

2 more replies
Answer Match 54.6%

just got a new graphics card and trying to install the software for it

during the installation it says
"Setup is unable to complete the installation. Try to setup your display adapter with a standard VGA driver before running setup."

have no idea how to do this and i've been searching the net and forums for a how to but have found nothing helpful

you're help is greatly appreciated

A:Need to Change to Standard VGA video adapter

tap f8 when booting and from the options try
low resolution mode
disable a/virus and then try the install

3 more replies
Answer Match 54.6%

Hi guys, I have a problem when i go to device manager ---> display adapter and update the "Standard VGA Graphics Adapter its says "Windows has determined the driver software for your device is up to date. " but my default is Intel G41 express chipset. I tried almost all options, uninstall and scan for hardware changes then again its back to Standard VGA ....how to fix this ? sorry for my bad english

A:How to update Standard VGA Graphics Adapter ?

https://downloadcenter.intel.com/Sea...xpress+Chipset

Search here your driver, download and install it.
Pick the correct OS you're using.

1 more replies
Answer Match 54.6%

Hello,

do you guys know where I can download a driver of my graphics card for windows 7 ultimate 32 bit?
I already searched on the net but sadly.. I couldn't find a driver for it. I also tried to update it but still no use.

here is the screenshot

A:Standard VGA Graphics Adapter driver

Without the exact graphics card model we can't really say. However, if its old and all that is available is the generic Windows installed VGA driver, you may be stuck with that.

2 more replies
Answer Match 54.6%

I updated from windows vista home premium 64 bit to windows home premium 7 64bit and now i have standard vga graphics adapter.My model is a Sony PCG-8112L.
 

A:Standard VGA graphics adapter help needed

You didn't state the problem very clearly but if I guess, I'd say you neglected to install the graphics driver. If so, I'd guess that you may have forgotten to install the chipset, sound and LAN drivers too.
 

4 more replies
Answer Match 54.6%

I have a problem. My sister bought Acer Aspire 7551S and laptop is good. But once i tried to update ATI Radeon 6550M it said there is no such thing in her laptop . It said that there is no such hardware component so I really have no idea what to do, i tried everything and I can't even update standard VGA driver :\ in "dxdiag" says that my main driver is "vga" and that the driver is from 2009.
I would appreciate if anyone knows what's it about, I don't think that people in the shop would take out the graphics card :\ Thanks

A:Says I have standard VGA adapter instead of AMD Radeon HD6650M

Make sure you have the proper chipset drivers and the graphics driver. try the ones from the Acer website for her laptop first.

9 more replies
Answer Match 54.6%

yesterday i installed windows 7 to my computer . and when i installed my graphics card driver , it only shows standard vga graphics adapter in Device manager. and in Display-screen resolution- advanced settings it shows :

chip type: ATI ATOMBIOS
DAC TYPE: 8bit
Adapter string : VGA
Bios information ; 01.00

my graphics card is : EAH3870/G/HTDI/512M
Radeon HD 3870 512MB

i tryed installing the latest driver and the only thing it show's is that. .. how do i change standard vga graphics adapter to my Radeon HD 3870..... and when i restarted my pc it's screen resolution is changed to 800+600 ....

here is my dxdiag
System Information
------------------
Time of this report: 4/11/2010, 15:01:20
Machine name: MAXO-PC
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_gdr.091207-1941)
Language: English (Regional Setting: English)
System Manufacturer: Acer
System Model: Veriton M261
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (2 CPUs), ~1.8GHz
Memory: 1280MB RAM
Available OS Memory: 1280MB RAM
Page File: 486MB used, 2072MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
-... Read more

A:how to change standard vga graphics adapter

Visit game.amd.com to download the appropriate driver. Install. That's all. Enjoy!

If it doesn't install well by running the .exe, use the device manager to install by right clicking standard vga and choosing update driver software. Browse my computer....Then go along and point it to the driver's extracted folder.

Get the 32 bit Windows 7 Catalyst Suite.

9 more replies
Answer Match 54.6%

A few months ago I wiped and reloaded my computer because it had a virus on it and it seemed like the easier thing to do. When I reloaded everything the screen became more stretched and there is a yellow exclamation point next the the Standard VGA Graphics Adapter in device manager.
Specs:
Dell 1525
Intel174 Core153; 2 Duo T6500 (2.10GHz/800Mhz FSB/2MB cache)
2GB Shared Dual Channel DDR2 at 800MHz
15.6 inch display (1366X768)
Intel Graphics Media Accelerator X4500HD
160 GB SATA Hard drive (5400RPM)
Windows Vista Home Premium Edition SP1 32 Bit
Integrated 10/100 Network Card
Dell Wireless 1397 802.11g Half Mini-Card

So I've checked the Dell Support website and downloaded all the Video drivers and nothing worked. I'm not sure what to do.

A:Standard VGA Graphics Adapter (Code 10)

driver not installed correctly/wrong driver. uninstall the drivers from programs and features and then remove the video adaptor from device manager, reboot to safe mode and then use a driver cleaner to remove the leftover drivers. then do a clean boot so no apps can not interfere and reinstall the driver package.

1 more replies
Answer Match 54.6%

Hello. I recently restored the computer to factory settings and the graphics card won't work now. Before the restore it was working just fine but now I am stuck on the Standard VGA Graphics Adapter. The graphic card that I have I think it's a "ATI Raedon HD 5450 Series Graphic". I have already tried updating it and can't get it to work either. Here is a link for information about the computer, HP Support document - HP Support Center

And here are some pictures of what's going on.
(by the way, I haven't installed, removed, or touched anything inside the computer)
(the hardware acceleration slider is all the way to the right, the full position)
(this is windows 7 home premium 64bit)

A:HELP! Stuck on Standard VGA Graphics Adapter

Hi Welcome to Seven Forums ... Have you tried to Install the Driver for your Graphics Card from the Manufactures website ..

9 more replies
Answer Match 54.6%

After reinstalling Windows Vista OS 64bit on my Dell Studio XPS 1640, I reinstalled all the drivers that were on the resource CD that I ordered from Dell. On my device manager there is still a yellow triangle with an exclamation mark next to Standard VGA Graphics adapter. I used to be able to use 1920x1080 screen resolution; however, the highest option now is currently 1400x1050 pixels and it reads default monitor on display settings instead of having HD Radeon 4670 option as it did before. My graphics card is a radeon HD 4670. Could anyone possibly tell me what drivers I would need to download and install in order to get my screen resolution back to 1920x1080 and resolve the VGA adapter problem? I have gone to the dell driver website and called them on the phone but I can not seem to resolve this. I don't know if I need to turn something off or disable a driver to make this work, I'm at a loss and quickly getting tired of Dell. I followed the links from Triple6 back in Aug 2010 and it hasn't helped. Thank you for your help.
 

A:Solved: Standard VGA Graphics adapter

7 more replies
Answer Match 54.6%

Ok first i had win xp my downloaded games worked fine then i upgraded it to windows 7 i noticed it was slow so i installed windows vista and i cant even play games without getting an error

i checked my display driver it says standard vga dislay adapter how do i update this?

heres some of my cpu specs

Model:hp workstation xw4100

Processor: Intel(R) Pentium(R) 4 CPU 2.60GHz 2.59 GHz

Memory (RAM):1023MB

Sytem type: 32-bit Operation System

plz help i really wana play downloaded games again
 

A:Solved: Standard VGA Graphics adapter plz help

12 more replies
Answer Match 53.76%

I have not been able to successfully install my graphics card after upgrading to windows 7 ultimate.

I would like to know if there is anyway to detect an external monitor using the standard VGA Graphics Adapter as my graphics card.

A:External Monitor using Standard VGA Graphics Adapter

Welcome to seven forums. IMO You should first read through thie thread and get your graphics card driver installed, then you shouldn't have any problems. Fabe Windows not recognizing NVidia GeForce 8400M GT

2 more replies
Answer Match 53.76%

Yeah so, every now and again i decide to update windows 7 64, just to see if it WONT make me have to do a reinstall, ya know for it to do some actual good. yeah not so much... Problems problems, problems, ever since i updated to win7...

this latest batch of problems has me kinda ticked and sorta fed up entirely, of course geeksquad is a joke of a company, who wont honor their obligation when i bought my laptop, but thats a rant for another day.

so this one day, i restart my computer, just like any other time, and next thing i know, upon restart, i have 8 bit. with a 800x600, i check to see if maybe its just a video driver issue, and my gforce is gone, it's replaced with " generic non-Pnp monitor standard VGA graphics adapter ".

To top it off, i forget what peice of hardware i had originally.

So now whenever i restart my computer, or shut it off, then turn it back on again, my screen looks as if an 8th grader created a new theme for my laptop...

if i want to to be "normal" i have to just shut the lid, and pray it comes back more appealing...

What can i do??
thanks,

(note the graphics card, aka not correct...)
___
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz, Intel64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 4095 Mb
Graphics Card: Standard VGA Graphics Adapter, 7 Mb
Hard Drives: C: Total - 141623 MB, Free - 118380 MB; D... Read more

A:generic non-Pnp monitor standard VGA graphics adapter???

16 more replies
Answer Match 53.76%

Hey everyone, it's been a long time since I've had to ask anything on these forums, but I'm glad they're still here when I need them! I've done some looking into the problem, and it seems like there aren't many resources on my problem.

I'm trying to connect my television to my laptop, via an SVideo connection. The problem is, my graphics card does not, and CAN NOT, have its factory/updated drivers installed. The graphics card is currently being run under "Standard VGA graphics adapter" drivers.

(The reason I can't put drivers on the card is because it's fried. I'm suffering from a burnt-out, defective NVidia GeForce 8600M GS, like many other people, and I'm mired down in court documents that I'll be using against HP in small claims court.)

Are there another set of drivers I could try that would allow my laptop to use an external display?
Is there a way to set up an external monitor under standard VGA graphics adapter drivers?
 

A:External Display on Standard VGA Graphics Adapter?

12 more replies
Answer Match 53.76%

RE:
Gateway laptop model ML3108B
Nvidia Geforce Go 6100 graphics card
Windows 64 bit O/S (originally vista)

Device manager tells me the graphics card is the standard vga 1..i have read up on this and have tried several things such as downloading new drivers from Gateway - they won't install saying they are not compatible with win 7 - tried that in compatibility mode to no avail.

Windows update wants to install the new drivers for the nivida graphics card but when it does it just messes wit the laptop and it won't start and i have to roll back time!

Ideas appreciated please

thanks
FF

A:Nvidia/Standard VGA Graphics adapter issues

That should say windows 7! doh! lol

3 more replies
Answer Match 53.76%

OK as Ive been looking around the site Ive noticed that there are many issues like this one, and Im sure there are plenty of people out there that have this problem...

My "Windows Experience Index" is at a 1.0 only because my Graphics, and Gaming Graphics rating are at 1.0. Everything else is at 5.9 which I can live with.

When I look at my adavanced settings for my monitor it Shows my Nvidia GPU but only running with 14 MB total avail mem. And I know that NOT right. Unfortunatly when I went to Nvidia's site and ran the auto detect it said that I didnt even have their product and that I had the Standard VGA Graphics Adapter.

I can't seem to find the right drivers for this to fix it all, and I would love to be able to "Experience" Windows 7 at its fullest. Any help would be greatly appreciated. Hopefully the attached photos will give you an idea as to what Im working with.

Also When i toubleshoot Aero Ive received this message:
"The current video card may support Aero with a driver that is compliant with the Windows Display Driver Model (WDDM). Contact the manufacturer of your computer or video card for a WDDM-compatible driver."

And when I try to change my screensaver to a 3D one it states that I either need a newer graphics card or one that is compatible with Direct3D. So yeah. Thats about where Im at.

A:Generic Non-PnP Monitor on Standard VGA Graphic Adapter

Hi and welcome to sevenforums. yeah it seems like nvidia has had a tough time with win 7, but it has been getting fixed. What build of win 7 are you running? is it 32bit or 64? and what video card do you have? Ken

9 more replies
Answer Match 53.76%

When I first downloaded Windows 7, the resolution was something like 1024 x 786 (or whatever the number order is). I was told to update my video card, but since I can't afford to do that, I dealt with it. It was annoying, but I got used to it.
A few months later, I turned on my computer and it had magically fixed itself. The resolution was back to normal, my DVDs would play, yaddah yaddah. It stayed like that for a few more months.
Then, yesterday, I turned my computer on and it was back to having a tiny resolution. It tells me I need to update my video card driver, but when I did, it said that it was fine. Now I'm lost because I've done everything I know how to do whether it be updates or installs.
I'd really like to avoid forking over the cash (that I don't have) for a new video card so anyone knows how fix this problem on a Sony Vaio PCG-6L1L (VGN-SZ230P) (an ancient computer, I know), can you please help (with step by step instructions if possible)?

A:Standard VGA Graphics Adapter - Sony Vaio

I would start with re-installing the video drivers, both of them. From looking at the specs for that model laptop (click on Marketing Specifications to view the pdf),

Sony eSupport - VGN-SZ230P - Manuals / Specs / Warranty

it has both the Intel 950 (chipset Intel 945GM) and the Nvidia Go 7400, If that is in fact what it has I would start with the Intel driver first,

? Intel® Graphics Media Accelerator Driver for Windows* 7(exe)

and then install the Nvidia driver second (it's a beta, looks like Nvidia dropped support for it),

NVIDIA DRIVERS 179.48 BETA

They may not install as Sony is somewhat anal about allowing manufacturer's reference drivers to be used without them (Sony) first doing whatever it is they do to the INF's (they can't mod the drivers themselves, just the INF's).

If neither of those work you can try the Sony provided Vista drivers from ehre,

Sony eSupport - VGN-SZ230P/B - Software Updates & Drivers

3 more replies
Answer Match 53.76%

I just recently tried uprgraded from Windows 95 to Windows 98. Upon finding that such a task was unsuccesful and my computer had no room for it, I was forced to format my hard drive; much to my dismay.

Once Windows 98 was loaded I went to Properties and then Settings to fix my Display. I was rather annoyed to find that the computer was telling me I only have 2 Bits or 16 Bits of color. I know damn well it is registered for 32 Bits and is running on FAT32. I cannot understand why it is doing this for me. I understand I will probably need another driver, but I do not know which one.

My Monitor is a Hewlett Packard Ergo 1024 and my CPU is a Compaq Deskpro ... Not sure of the numbers. Please, if someone can help me let me know. I am great with computers but am completely stumped on this one. I know that there was a previous discussion of this on another post set but I did all they talked about and nothing helped.

Someone please help me!!!!!!
 

A:Standard PCI Graphics Adapter is Driving me Nuts!!!!!

8 more replies
Answer Match 53.76%

Okay, I posted a while back about serious problems [ not that I am the first person ] I am having with my Standard PCI Graphics Adapter. As always, I only have 2 and 16 colors when I am running on a FAT32 and am registering for 32Bit. This thing is making me want to get rid of my computer because I fear it is too old to be able to help now. Someone gave me a site to download a new driver, but while it did give me more colors, the icons, fonts, screen in general, were seriously messed up. I could not reverse the process no matter how hard I tried, so I once again was forced to format my computer. Someone please help me, I'm going nuts over here.

My computer specs:
Compaq Deskpro 6000
Hewlett Packard Ergo 1024 14 Inch Display Monitor
Intel Pentium II Processor

Please e-mail me at [email protected] if you can help. I will appreciate it so greatly. Thank you.
 

A:STANDARD PCI Graphics Adapter [VGA] Strikes Back! >.>

9 more replies
Answer Match 53.76%

]Could someones help me, ive trieed to play League of Legends but i can't because when i try to play it says ''An unknown DirectX error has occurred and League of Legends cannot start. Please make sure your video card is using the latest video drivers from the manufacturer'' and it closes.




System Information
------------------
Time of this report: 12/23/2014, 01:48:50
Machine name: UTILIZADOR-PC
Operating System: Windows 7 Home Premium 32-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: Portuguese (Regional Setting: Portuguese)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 09/28/08 09:54:58 Ver: 08.00.14
Processor: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz (2 CPUs), ~2.5GHz
Memory: 2048MB RAM
Available OS Memory: 1920MB RAM
Page File: 1515MB used, 2322MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Di... Read more

A:Standard VGA graphics adapter problem LeagueOfLegends

Hello and welcome to Seven Forums

You haven't installed your graphics card drivers yet. Please follow this tutorial: System Info - See Your System Specs so we can help you find your graphics driver

5 more replies
Answer Match 53.76%

Hello, I have a Aspire AX3950 that came with Windows 7 Home. I had to re-image the machine to Windows 7 Professional so I could install Visual Studio 2013. I got the software from my MSDN Subscription.After successfully reimaging the machine, the system only recognizes one of my monitors. It was working properly with the same two monitors before the windows update. I checked the Display Adapter and it shows "Standard VGA Graphics Adaper". It was my mistake for not checking the adapter before updating the system. From what I have found on the internet, this AX3950 has a graphic card coupled with the mother board. My question is, how can I get the original Display adapter working again? 










Solved!
Go to Solution.

A:Display adapter set to Standard VGA Graphics Adapt...

drivers can be found them here:http://us.acer.com/ac/en/US/content/drivers/2187;-;Aspire%20X3950 to know what's your VGA, double click on the standard VGA adapter on device manager, select "details" tab, from the drop down menu choose "hardwareIDs", select the first string, copy and paste to google and look if it's Intel, nvidia or ATI. then select from the link above the proper drivers.

4 more replies
Answer Match 53.76%

I've tried about almost every "solution" I could find on the internet and it's just been one problem after another.

I've just recently received this laptop and I went and tried to play The Sims 3 on here, but when I tried and go play it an error popped up stating "Can't run The Sims 3 with the video card in this system" blah blah. So when I finally found the issue and went to try and update the graphic card, it would say the installation was successful and that I just needed to restart my computer. But I restart my laptop and it still shows up as "Standard VGA Graphics Adapter" under Device Manager. That happened when I went to install the "Intel(R) HD Graphics Family". I've tried every single method I could find to updating this stupid graphics driver, but I've just been running into one problem after another. I thought I finally found a solution when I went to go and try and install the beta version of "Intel(R) HD Graphics 4400", but at the end a window pops up talking about "The driver selected for this device does not support this version of Windows." Every single thing I've tried so far as resulted in nothing but failure. I don't know if it's my laptop that's the problem or what. All I know is I'm about ready to give up at this point.

I'm using a Dell Latitude 3340
Windows 7 Professional 64-bit
Intel(R) Core(TM) i3-4010U @ 1.70GHz
Hardware IDS:
PCI\VEN_8086&DEV_0A16&SUBSYS_061F1028&REV_09
PCI\VE... Read more

More replies
Answer Match 53.76%

I have MSI GX-600 laptop. I recently installed Windows 7 wanting to see if it really was an upgrade from Vista. It was. It performs better, is more stable, have fever bugs. But, my graphic card wont work properly. And, when you have a gaming laptop it is essential for the graphic card properly.

My graphic card, an integrated GeForce 8600M GT, only shows up as a "Generic Non-PnP Monitor on Standard VGA Graphics Adapter". The computer cant even run the screen saver.

It seems to me that Windows 7 fails to find my graphic card. When i try to install the drivers from Nvidia the install stops ans says that my hardware do not support the driver.

I NEED HELP

A:GenericNon-PnP Monitor on Standard VGA Graphics Adapter

32 bit driver - MSI USA ?€“ Computer, Laptop, Notebook, Desktop, Mainboard, Graphics and more

9 more replies
Answer Match 53.76%

So i recently just built my new computer (4 days ago) its been working amazing until today when i tried to put it to sleep but noticed it was greyed out. after a little bit of research i found out its most likely because my "Standard VGA Graphics Adapter" wasn't working right.

Here are my Hardware Ids for it:

PCI\VEN_8086&DEV_0412&SUBSYS_D0001458&REV_06
PCI\VEN_8086&DEV_0412&SUBSYS_D0001458
PCI\VEN_8086&DEV_0412&CC_030000
PCI\VEN_8086&DEV_0412&CC_0300

i have tried trying to update the drivers but no luck still wont work

Vaas-

A:Standard VGA Graphics Adapter Yellow triangle

Hi there .. Try the Driver from the Link below ....

GIGABYTE - Motherboard - Socket 1150 - GA-Z87X-D3H (rev. 1.x)

3 more replies
Answer Match 53.76%

http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Standard-VGA-Graphics-adapter-This-dev... I have the same issue as this guy asking. However, the file that is provided by the answer has been corrupted. If this file can be reuploaded properly, that would be appreciated. I know this is quite old but I want to resolve this problem. If there is a new solution it would also be greatly appreciated. Thanks for your help!

A:Standard VGA Graphics adapter (This device cannot start. (Co...

It is also the same hardware ID for standard VGA graphics adapter. PCI\VEN_1002&DEV_6841&SUBSYS_17F4103C&REV_00PCI\VEN_1002&DEV_6841&SUBSYS_17F4103CPCI\VEN_1002&DEV_6841&CC_030000PCI\VEN_1002&DEV_6841&CC_0300

2 more replies
Answer Match 53.76%

I'm on Windows 7 Professional 64 bits
My motherboard has an onboard graphics card that works just fine. I installed an old PCI graphics card in order to use more monitors (TNT2 Riva by NVidia). The card is so old that it doesn't have a driver for Windows 7 64bits (it seems that it works in 32 bits)
As a result Windows 7 uses a "Standard VGA Graphics Adapter" as the driver, the monitor and card works but it wont let me go above 1024x780, is there any way to force a higher resolution in this driver? Both my monitor and card can support it

Best,

A:Standard VGA Graphics Adapter won't let me go to 1280x1024 resolution

I doubt if any pci card will work with 7 64 bit.

9 more replies
Answer Match 53.76%

Hello, I have a problem, as you may already know: After switching my hard drive out for a new one (Because of what I think to have been a virus), my computer keeps telling me that I have a "Standard VGA Graphics Adapter," when I know I have an "ATI Radeon HD 6480G" graphics card. I've looked for drivers to install for my actual graphic card, but I can't find and; I also am not sure on how to install them. I have no idea how, or why, this happens, although I do know I can't play certain games (I've tried one). Speccy says this about it:

Monitor
Name LP156WH2-TLAA on Standard VGA Graphics Adapter
Current Resolution 1024x768 pixels
Work Resolution 1024x728 pixels
State Enabled, Primary, VgaCompatible
Monitor Width 1024
Monitor Height 768
Monitor BPP 32 bits per pixel
Monitor Frequency 1 Hz
Device \\.\DISPLAY1\Monitor0
ATI video
Manufacturer ATI
Model video
GPU Sumo
Device ID 1002-9648
Subvendor Toshiba (1179)
Current Performance Level Level 0
Technology 32 nm
Release Date Jun 15, 2011
DirectX Support 11.0
DirectX Shader Model 5.0
OpenGL Support 4.0
Bios Core Clock 200.00
Bios Mem Clock 667.00
Driver version 6.1.7600.16385
ROPs 4
Shaders 240 unified
Count of performance levels : 1
Level 1

And this is a picture of HW Vendor Detection:
^I guess you're going to have to click it...

I also know that before I switched hard drives, my screen resolution went up to 1366x768 (I believe, might have been 1368), and now it only goes up t... Read more

A:Computer says I have Standard VGA Graphics Adapter after switching HDD

mahlulu22, welcome to the Seven Forums.

For the drivers you need you have to go to Toshiba,

Drivers & Software Support | Toshiba

You will need the full model number for your laptop. While there also look for chipset drivers, and if available get them and install before the video driver.

5 more replies
Answer Match 53.76%

The Standard VGA graphics adapter says "this device cannot start (error code 10)". Also whenever Mass Effect is started the error "Direct3D is not available because the computer is locked. Keep retrying?" and if you click yes or no the message comes back. Using Windows Vista on MacBook Pro.
 

More replies
Answer Match 53.76%

i just installed a new version of windows vista. some of my games are not working though. when i go to install me drivers for my video card i get this message, "setup was unable to complete the installation. try to setup your display adapter with a standard vga driver before running setup." does anyone know how to do that? thanks

More replies