Tech Problem Aggregator

RIS driver for WinXP

Q: RIS driver for WinXP

I own a second hand Mesh computer and I have none of the official documentation. Recently I reformatted my pc to Windows XP Professional SP3 and did my best to collect drivers and so forth. The problem I am having is installing the correct driver for my Ethernet Port.

I found that I needed the driver associated with the motherboard -- ASUS P5N-E SLI. Went to the manufacturers site and located the LAN driver here -- http://support.asus.com/download/download.aspx?SLanguage=en-us&model=P5N-E SLI

I cannot work out how to install this driver. There is no .EXE and after a closer investigation I found it to be a Remote Installation. I did a google search but with my little knowledge of the topic, nothing seemed to answer my installation query. The documentation included speaks of a RIS image and an unknown directory to me -- RemoteInstall\Setup\Language\Images\Dir_name\I386

Any help on installing this driver? If there is any extra information needed, I'll do my best. Thanks in advance, I know how useful this forum can be.

A: RIS driver for WinXP

I would like to announce a result Did a little more research and found that the driver is included in the NForce package (doh). Sorry for wasting a thread.

1 more replies
Answer Match 51.24%

Hello. Does anyone know if USB drivers written for Windows XP will work with Windows XP Embedded?
Thanks.
 

A:WinXP / WinXP Embedded USB Driver Interoperability

XP Embedded is supposedly a componentized version of Window XP. It's intended for OEM's developing an embedded computer, usually for some industrial or large commercial application, rather than your run-of-the-mill PC.
 

2 more replies
Answer Match 44.1%

Hi anyone,

I'm looking a Driver for winXP-SP3?
my notebook specification are listed below:

Model : ASUS K50AB-SX021L
Processor: AMD Athlon X2 QL-64 2.1GHz
RAM: 2GB
Hard Disk: 250GB
Graphics: ATi Radeon HD 4570

Can anyone help me?

A:Driver for winXP-SP3?

Hello Yunks,

What Driver are you looking for? (Graphics,Audio,Network,etc)

3 more replies
Answer Match 44.1%

I have a fairly old notebook that I have been doing a pretty good job of keeping on life support. I've updated and upgraded everything and everything else works just peachy except now I have a problem with WinXP and the CD-ROM drive.

The notebook is a Toshiba Satellite 2250CDT with a TEAC CD-224E-B CD-ROM drive. In Device Manager there is a yellow exclamation point on this drive. The Device status is "Windows cannot load the device driver for this hardware. The driver may be corrupt or missing (Code 39)".

I'm guessing the TEAC driver is incompatible with WinXP and there is nothing on the TEAC or Toshiba websites. Is there such a thing as a generic driver? I've scoured the web looking for an answer and you may be my last great hope. Any ideas?
 

A:Need WinXP CD-ROM driver

10 more replies
Answer Match 43.68%

I've been having a slight problem with my SATA controller drivers. The nvidia drivers that I was using would always cause a bsod pointing to nvgts.sys in system32/drivers. While trying to figure out which driver to install as a replacement, i found the nvgts.sys file and deleted it from system32/drivers folder, just to see what would happen... Now Windows XP can't boot up because the driver is missing lol; I can't even get into safe mode. So, is there any way to reinstall the driver from the Windows CD-ROM or something? The black screen says to insert the said CD and start the recovery console but I wouldn't know what to run. Any help with this would be greatly appreciated. Thanks in advance.
 

A:Reinstalling Driver WinXP

Assuming you used a floppy to install the Nvidia Raid drivers, start a Repair Install and when it asks for you to press F6 do so and re-install them.

edit: btw, if you Google that driver there are LOTS of people experiencing issues with it.
 

4 more replies
Answer Match 43.68%

will upgrading to xp resolve the driver issues that I am encountering while trying to install a ati AIW Radeon 7500 on my gigabyte 'GA-7VKMP' with onboard video, audio,and network, running a duron 1.3 ghz processor with 256 mb ddr ram and win98, and a panasonic s15 monitor.

For some strange reason no matter what advice I follow I just cannot get the drivers to work. I have even formatted my machine, reinstalled all drivers, the most recent that I can find, and still no success.

Any advice will help.......

Hugh
 

A:WinXP driver issues

Hi, Your motherboard has a chipset from VIA, and usually you must install motherboard drivers from an install CD, or download from the support site for the Gigabyte board...did you do this?
You have an onboard video adapter/chip. May need to disable it in the BIOS....I am not sure as some allow you to just install an added in card and load new drivers, some do not.
You may have to load the Standard VGA adapter drivers, then after that is loaded and running in 16 color (yuck) you can install the right drivers for your OS and the Radeon and it will install.
I would review the instructions from the mobo manual for installing an add in video card- the manual, if you do not have one, is here::
http://www.giga-byte.com/MotherBoard/Products/Products_GA-7VKMP.htm
manual found in the list on the left.
Reading the FAQs might be quicker than opening the manual online with Adobe Acrobat.... but, it says "Coming soon" for them...oh well, manual is best I can do, unless you or someone can hunt for details on how to use add in video card easily.
Might be just the standard step by step, uninstall all video drivers and switch to SVGA, then install new ones. Safe Mode can help with this.

Note that there is a 7VKMP-P version of this board.
 

1 more replies
Answer Match 43.68%

Hello!
I am new here, and I hope someone here can really help me out of this dilemma. My wife somehow downloaded and installed a certain driver she thought it was to be upgraded for Window XP Pro. After she rebooted it, she got as far as just before the log on, everything freeze. I ask if she remembers what the driver was she downloaded and installed, she didn?t know for sure what it was. I try booting into WinXP Pro Safe Mode, and it did the same thin, mouse and all. I cannot log onto Safe Mode. Believing it may have been a certain driver in conflict with something incompatible ? possibly the USB ? I unplug all the devices using the USB including the mouse. The results are still the same, if froze as before. I use the command.exe to run chkdsi /r to see if it can repair it. That one fails. I try using the WinXP CD in an attempt to repair the Windows without losing the data. That didn?t work either.
My only option is possible reformatting the hard drive, but I do not want to reformat the hard drive until I can figure out how I can retrieve the important data (My Documents). I remember I can easily do that with Windows 95 using the DOS command by coping most of my files to the floppy disk. It was time consuming, but it was worth it before the invention of the Flash. Now I can?t figured out how I can retrieve the data to be copy to the Flash since WinXP doesn?t work like Windows 95. The hard drive, by the way, is healthy. It?s just like I say, there is a driver conflict that... Read more

A:WINXP Driver Incompatible?

Using the Windows Installation disk, did you try running "chkdsk /f" ? If so did it report and/or fix any errors ? Run chkdsk multiple times and get several clean scans before moving on; the HD may be getting ready to fail.

Also, in Recovery Console, run "fixboot" and "fixmbr".

Try Safe Mode. When booting to Safe Mode, disconnect ALL hardware except for the keyboard.

If all of these fail, you may need to run a Repair Install.

Is the WinXP disk you are using the correct one for you installation ?

3 more replies
Answer Match 43.68%

I recently installed win xp pro on a couple of friends pc's after the dreaded BSOD and noticed that most of the video, audio and modem drivers were missing( showing up as big yellow question marks in device manager) so I got a corporate edition of xp pro with sp3 slipstreamed into it. I used this disk on a pc the other day and same thing happened(Is this common?) anyway I downloaded all the drivers from the dell site and checked the pc, played cd,played video and connected to the internet all ok. problem I'm faced with now is the owner uses a usb dongle ( from his mobile phone company) to get on the 'net but it wont work on the pc yet if I put it in mine it works fine, I was thinking it was something to do with the usb ports but then how come the keyboard and mouse still work.
next idea was maybe it something to do with the wireless driver, I checked device manager but can't find anything wrong, so I guess I don't know what I'm looking for, so I came here for enlightenment
Thank you

A:winxp pro driver issue

What is the make and model number of the computer?

Did you install the motherboard chipset driver?

6 more replies
Answer Match 43.68%

Hi ,
I have dual booting OS. WIN98 in C \drive &WINXP in D\ drive
I cannot use my Dial up internet connection while working in WINXP. Can any one help me?(I am very new to this type of forum,also toWINXP OS)
 

A:modem driver for WinXp

12 more replies
Answer Match 43.26%

Help!

I have an Imation CD-RW Burner 40x12x40 that works properly on Win98 using Nero5 Software. I installed the same hardware and software on my other PC running on WinXP Pro, Nero won't recognize the burner. It only have Image Recorder on the recorder selection of Nero Express. Please advice!!!
Thanks.
 

More replies
Answer Match 43.26%

Ive been using my pre-confingured Vista notebook for awhile now but a few days ago, i decided to dual boot...but some drivers i installed were not capable and some gave me errorsI cant find a workable wifi adapter driver and i get an error like this from my graphics driver: http://i42.photobucket.com/albums/e314/fat.../Untitled-3.jpgVista Pic of specs: http://img8.imageshack.us/img8/3025/79782600.jpgXP Pic of specs: http://img8.imageshack.us/img8/4121/46650701.pngMy exact model for my video card is http://i40.tinypic.com/27yva0o.jpgand for my Wifi adapter is....well just look at the vista pic of specsThanks

More replies
Answer Match 43.26%

Having a bit of an issue with a driver. Motherboard is MSI K8T Neo MS-6702 ver. 1.0 running XP Pro SP3. I've installed all the driver's from the website as I don't have a driver disc for the MB.

Device Manager shows a WinXP Promise FastTrack 376/378 (tm) Controller with a code 10 error device cannot start. I've tried a few driver's and all have the same result. Forgive me if I sound noobish, but I'm a bit behind in my hardware The cpu is a 64-bit AMD Athlon 3000+ running at 2GHZ. I've installed 32-bit version of XP.
 

A:WinXP Promise 376/378 driver issue

8 more replies
Answer Match 43.26%

Alright, I give up. If you go into your Windows XP device manager and View > Show Hidden Devices, look under Network adapters. You'll see WAN Miniport drivers, probably several of them. Unfortunately, on one of my Windows XP Pro machines, I don't. They're not there. Now, they're just software drivers, so it should be quite easy... but how do I add them?
 

A:WinXP: Install WAN Miniport driver?

I think I've got it...

If anyone runs into this, here's how I fixed it, although not well tested yet:

I just exported related registry settings from a similar, but working computer. Specifically, those referring to the ndiswan and related drivers. It seems that the most important of those are in Local_Machine\SYSTEM\ControlSet001\Enum\Root\MS_NDIS...

Then, I temporarily changed the permissions using regedt32 on the non-working computer so that I could modify the Root folder... And imported! With a restart, the missing devices are showing up.
 

2 more replies
Answer Match 43.26%

ve been using my pre-confingured Vista notebook for awhile now but a few days ago, i decided to dual boot...but some drivers i installed were not capable and some gave me errors

I cant find a workable wifi adapter driver and i get an error like this from my graphics driver: http://i42.photobucket.com/albums/e314/fat.../Untitled-3.jpg

Vista Pic of specs: http://img8.imageshack.us/img8/3025/79782600.jpg

XP Pic of specs:
http://img8.imageshack.us/img8/4121/46650701.png

My exact model for my video card is http://i40.tinypic.com/27yva0o.jpg

and for my Wifi adapter is....well just look at the vista pic of specs

Thanks

Sorry if wrong section, this is my first post XP
 

A:NO WiFi Adapter + GPU Driver for WinXP?

9 more replies
Answer Match 43.26%

I am trying to reinstall WinXp onto my Dell Inspiron 2200. I had no problems with the OS when I installed it. But when it comes time to extract and install from the Drivers and Utilities disk, many of the drivers applications and utilities simply do not install. I get what seems to be one of two error messages. Either that an object was not found, or it cannot install on this system. The only utilities that seemed to install without a problem where ones that worked for WinXp and Win2000 and that were also listed as compatible with every Inspiron model type in the drop down list. A few months back I reinstalled WinXp on this machine without these problems using the same two disks. I do remember that when using the Drivers and Utilites disk, Inspiron 2200 was not a model number available on the drop down list. XPS, 600m, 300m, 8600, and 1150 were on there to name a few. I recall using the files for one of those model types and never having any problems. Anyone know if any models out there use the same drivers as a 2200? Or if something may have went wrong when I installed WinXp. Thanks.
 

More replies
Answer Match 43.26%

I pulled an old printer out of the closet to use on a new PC that I am building...just to have a printer connected to it. It doesn't work with the print driver provided with WinXP and Canon no longer supports it. Does anyone know where I might find a print driver for it. It prints test pages very nicely.
 

A:Canon BJ-200 Print Driver for WinXP?

7 more replies
Answer Match 43.26%

Good Day!

Hello. Can anyone help me on how to extract a specific modem driver in the windows xp cd. i dont know where it is residing. thanks.
 

A:extract modem driver from winxp

6 more replies
Answer Match 43.26%

hi, i have a working computer running windows xp, i have recently upgraded the computers Motherboard, memory, processor and graphics card.

Upon first boot of my computer just before the login screen, i get a message saying i need to reactivate my windows, after that i log-in and start reinstalling drivers.

i am planning to use the onboard sound card on the MOBO as i was doing before i upgraded,

the problem comes when i try to reinstall my sound driver, basically it keeps failing. and im not sure why.

any help would be appreciated

regards
 

A:WinXP Sound Driver Confliction

Are u using the most recent driver from the manufacturers web site?
 

3 more replies
Answer Match 43.26%

Ive been using my pre-confingured Vista notebook for awhile now but a few days ago, i decided to dual boot...but some drivers i installed were not capable and some gave me errors

I cant find a workable wifi adapter driver and i get an error like this from my graphics driver: http://i42.photobucket.com/albums/e314/fat.../Untitled-3.jpg

Vista Pic of specs: http://img8.imageshack.us/img8/3025/79782600.jpg

XP Pic of specs:
http://img8.imageshack.us/img8/4121/46650701.png

My exact model for my video card is http://i40.tinypic.com/27yva0o.jpg

and for my Wifi adapter is....well just look at the vista pic of specs

Thanks
 

A:NO WiFi Adapter + GPU Driver for WinXP?

Hi moreleech, and welcome to TSG.

I posted a link to a possible source of an XP driver for your WiFi adapter in your other thread.

FYI, this site's rules prohibit multiple postings of the same problem or question.

Dup of:
http://forums.techguy.org/windows-nt-2000-xp/824459-no-wifi-adapter-gpu-driver.html#post6676639
 

2 more replies
Answer Match 43.26%

I just got a second-hand Dell Optiplex GX260. The original purchaser bought it with XP pre-loaded, and had only the reinstallation CD, which I got. Unfortunately, the CD says "This CD is not for reinstallation of programs or drivers." This apparently is true as I'm finding that I have to use the device mfr's disk to get drivers whenever I attach something to the computer. I was wondering if there's a separate driver disk that came with computer (the guy I bought from doesn't recall), and if so, where I can get one. I tried calling Dell, but got tired of pressing and holding.
 

A:Driver for WinXP Pro on Dell Computer

dell supplies a cd with drivers and another with applications

dell will supply one

dell support calls go to the other side of the planet
 

3 more replies
Answer Match 43.26%

Hi, recently I've been having some problems with my computer so I decided to give it a reformat. Up to this point I used to leave my computer at BestBuy to get things done because quite frankly I don't know squat about computers. But this time around I wanted to learn my way around the advanced aspects of computer maintenance, so I decided to do it myself.

At first I had to learn what BIOS is and how to make my computer boot from CD rom. No biggie, didn't take me too long. But when it got to the actual installation part I got a message that read something like "hard disk not detected." I gave it another try before searching the net again for an answer. I found one case in a different tech forum that was similar to mine, and most of the replies suggested that he either needed a fresh RAID driver install or reinstall in a different driver mode. After fiddling around on Dell's support page for a bit with the help of a very, very kind person I met online I finally made a RAID driver disk and gave the whole thing ANOTHER try. No dice, it still couldn't detect the hard disk even after the drivers were installed.

So I simply decided to try the whole thing in different driver mode and I'm afraid this is what sealed my fate. I was able to fdisk in "RAID autodetect / ATA" mode (it was originally set to "RAID autodetect / AHCI" mode) and install a new copy of Windows - except I can't install any drivers necessary to ru... Read more

More replies
Answer Match 43.26%

A week ago my computer crashed. Something wrong with one of the coolers. When I tried to re-install WinXP, but it failed. Something to do with a NTLDR-failure. I brought my pc to the retailer. They fixed all problems.

Yesterday i discovered my sound isn't working anymore. When i use Winamp to play any sound, the following message appears: Bad DirectSound driver. Please install proper drivers (...). Error code: 88780078.

Strange, 'cause everything worked fine under the previous install of WinXP.

Another strange thing: my computer seems to recognize the hardware, but 'there is no device installed'.

I want to try to install the Audigy-software again. Maybe that'll work, but my 'installation and applications cd' seems to be damaged. I can't read antything from it.

Help me.

A:Bad DirectSound driver after reinstall WinXP

drivers and software can be downloaded here.

3 more replies
Answer Match 43.26%

I tried to install video driver which have the following hardware id:
VEN_8086&DEV_2A43

but after installing I noticed that the icons under display driver in device manager have an exclamation mark
when I tried to update the driver using windows wizard, I get the following message:
"The I/O operation has aborted because of either a thread exit or an application request"

please help me to solve this issue.

Thanks in advance
 

A:can not install video driver on winXP

6 more replies
Answer Match 42.42%

I tried to install the MTK preloader VCOM driver but I got a message in device manager that this driver could not start because it was not signed. Is there a way to disable that requirement in WinXP? Also how to delete the driver completely from the computer? Each time I uninstall it and plug the phone in, windows installs the same driver again automatically. Is there a way to delete it completely?

More replies
Answer Match 42.42%

I just reinstalled WinXP SP3 on my computer and plugged in my ethernet cable to the mobo's slot. It doesnt recognize it so I'm assuming the driver is uninstalled, but I can't find it in Device Manager. The PC is custom so I am not sure on how to get the correct drivers to get the internet working. Any help would be greatly appreciated. Sorry for using the wrong forums, I needed an answer quick and the winxp forums look mostly dead.

A:WinXP Ethernet Driver Missing, Custom PC

What is Make & Model of the Ethernet card?

3 more replies
Answer Match 42.42%

I recently bought the supposedly excellent Canon MP530 multi-function printer,etc. and went to install it on my WinXP pro machine and . . . nothing. I've spent some time with Canon tech support (some helpful, some not so helpful) but I still can't get the freakin' things to communicate with each other. The consistent result of my installations is "no driver is installed" or "cannot find driver" - even though the driver itself seems to install. Also, when I turn the printer on, I get the New Hardware Wizard, which, I think, means my computer is detecting the printer. It's as if the driver is just not recognized by my computer.
I've installed (and uninstalled) the drivers from both the disc that came with the printer and from the Canon website. I've used two different USB cables. I've tried many combinations of plugging/unplugging, starting/restarting, turning on/off - all to no avail.
I've logged on as the Administrator. I've done my best to shut down any programs or processes- though I think this is tricky, as I don't necessarily know what each thing in my Startup or Services is. I've even tried installing from SafeMode. I've tried using the New Hardware Wizard; I've tried ignoring the New Hardware Wizard. I've received a few error messages, but only when attempting the full installation from the disc. The messages are: "AddPrinterDriverEx Error:2", "AddPrinter Error:1797&... Read more

A:WinXP Canon MP530 driver problem

16 more replies
Answer Match 42.42%

Presario 1622 56K-DF Modem driver for XP

Hi guys. I have noticed that when i installed winXP on my old presario 1622 it didnt detected the modem. I've tried to find the driver for XP but i'm having a little trouble with it. I went to the hp/compaq site but there's a driver but only for win 95/98/ME. I downloaded it but when using the .inf file trying winxp to detect it, it doesn´t work.

Everything was ok when it had win98 because it detected the modem right away...i know, this machine wasn´t supposed to work with xp but with good ram and a good hard drive it is working well

The modem in question is the Compaq Presario 56K-DF modem. If anyone knows where to find this driver, please let mi know.
 

A:WinXP Modem Driver for presario 1622

Take down the chip name, board, and product numbers, then look for the WXP drivers on www.driverguide.com. The drivers are there, and are free. The Presario used several different modems. The 56k-DF doesn't help unless you also know the brand... if you cannot figger it out, repost with the modem card and chip numbers here and we will guide you.
The modem is usually a Lucent, now found as Agere. The driverguide version that usually works is the Presario 1275 56K-DF, file name SP20530, which you can also find with a www.hp.com search.
 

10 more replies
Answer Match 42.42%

Hi Guys i am facing one problem here with Usb Data Traveler 2.0 Device. I have installed Windows Xp Sp2 and when i plugged in Data Traveler 2.0 device i have been told that no driver exist relating to this device..Well before that i used this device without installing any driver but this time i dont know what to do...Can any body tell me from where can i get Data Traveler driver for Windows Xp Sp2???Any help would be appreciated..Thanks.
 

A:Data Traveler 2.0 Driver Not INstalled In WinXp!!!

If you Google datatravlerdriver you might find what you want?
 

3 more replies
Answer Match 42.42%

A similar question was posted in this forum but It didn't answer my problem. I have a gigabyte 8iexp 845e MB, two Maxtor 80gig hardrives with I have connected to ide3 and ide4, with are the RAID connectors, I'm using WinXP, I boot from the CD, I hit F6, then I get the window that ask if I'm installing a 3rd party driver, so I hit "S", then I select the driver, hit return then I get the following "File\WinXP\fasttrack.sys caused an unexpected error (18) at line 2108 in d:\xpclient\base\boot\oemdisk.c." any help is appreciated.
 

A:WinXP,trouble loading RAID driver

11 more replies
Answer Match 42.42%

Windows XP MCE 2005 start up stalls at driver mpegport.sys. I got this once before and Windows fixed itself and everything was fine. Then I purchased a new MB and upon first boot up the system is back to this same startup issue and I can't install any drivers to get the new MB up. Anyone know the MS technical support article number related to this issue or have any suggestions? I've been to MS support and can never find a solution there. I've always found one only on the web.

More replies
Answer Match 42.42%

Specs:
WinXP Pro
AMD Socket 939 (AMD X2 4200)
NVIDIA nForce4 SLI - GA-K8N Pro-SLI
2.5GB ram

So I was having problems with connecting to the internet so I decided to reinstall my drivers for my LAN device. The installation didnt seem to have worked successfullly (nForce utilities were not working) so I tried reinstalling the driver again. After installation completed, instead of saying "You must restart your computer now or later" all that came up was "1155: [Okay]"
Then I restarted the computer and now it does not load XP after BIOS initiations. Just kind of stalls with a black screen, but the computer does not reset or shut down, just stalls.
It gets passed the BIOS stuff but does not show any of the XP boot screens.
I looked it up a little and found http://www.cgsecurity.org/wiki/TestDisk
that for data recovery, and potentially making the drive bootable again?
I'm not sure what to do, any way to get the computer to boot windows again without any loss of data? And a correct procedure of reinstalling the LAN driver would be nice, as it didnt work as I expected (unusual)
Any and all help is appreciated, hopefully I can get my rig back up and running in no time!
 

A:WinXP doesnt Boot after Driver Install

Once it gets past the POST screen, press F8 a few times and see if you can get into Safemode.

If you can, then you could use System Restore to roll the config back before the drama.
 

13 more replies
Answer Match 42%

Hello All Of You Tech Heads, This one is Stumping Me. I was Trying to Put in Some of the Old 16 bit Games into my computer the other day and Got this Message saying that the Virtual Device Driver Could Not Be Found, and got the same little GLITCH when I tried to Install a program that Defrags the Memory called MemTurbo. It is a Good Program Also but got the same Error Message when I was trying to install this program. So I went into the HELP Files in the Start Menu and it told me to go into the Reg Edit Program under the Run in the Start Menu. So Did This and Cruised Thru the RegEdit could not find the VDD file. So I was Wondering if there is a Proram to get to put this back in ?? Then I would be able to put the old games in! !
willisnillis
 

A:WinXP Home_VDD_Can Not Find the Virtual Device Driver

It should say which VDD is missing in the error message. If it does, google for the file, and DL it. Should come with a self-extractor.
 

3 more replies
Answer Match 42%

Hello, it's about installing WinXP on SATA (AHCI) hdd, by default standard windows xp installer can't detect AHCI, so while install you'll get a blue screen error.

I have found out that problem, and there is 2 available solutions:
1. By setting BIOS, advance, HDD, to compatible mode
2. By install windows XP that has integrated AHCI driver

​If you are using solution #1, then you can install windows xp by using standard winxp installer, but if you are using solution #2, then you need to find AHCI driver for your chipset, and then integrated it to winxp installer by using software called nLite.

Nah, I want to know, where I can download AHCI driver for nvidia MCP75L chipset for winxp pro sp2.

I just found AHCI driver for win xp pro sp2, but it's intended for intel chipset, whereas mine is nvidia MCP75L.

Do you guys know where to download it?

Thanks.
 

A:AHCI driver for nvidia MCP75L chipset for WinXP Pro SP2

6 more replies
Answer Match 42%

The printer refuses to install under WinXP.
It worked under WinXP before. However, I uninstalled Windows and worked under Linux for several months before returning to WindowsXP. I was able to use the printer, although problematically, under Linux. When I installed a fresh copy of WinXP, the WinXP drivers refused to install.
As a side note, the previous installation was an upgrade of Win2k, where the printer worked fine. It also worked fine on Win98SE.
When I try to run the installtion file (really a self-extractin ZIP) 'XPC11_15.exe' after the warning screen, it just closes and does nothing. I then unzipped the contents into a seperate folder: two file named 'xcc152k1.EXE' and 'XP_VB.exe'. The second file contains nothing but a warning message, while the second one is the installation of the printer drivers.
The installer loads, and looks OK. I choose the language and agree to the license agreement. Then a box informs me that I need to upgrade my firmware (I did so before, when the printer worked under WinXP previously). Left without another option I click Upgrade. It opens a little box called ,which displays "Copying Files..." and then "Installing Files...". These messages flash by quickly. Then a warning message called 'Printers' appears telling me that "The arguments are invalid." Another message appears in a seperate window also called 'Printers' telling me "Operation could not be complet... Read more

A:Xerox DocuPrint C11 Driver Installation trouble on WinXP

OK, I've solved the problem myself.
As I mentioned above, add the printer through the Add Printer wizard. There, choose the "Choose From List" option, and find the driver listed on the bottom of the Xerox part.
Install.
Then, in the Printer Properties, go to the Advanced Tab. There, change from Spool to Print Directly to Printer, and VOILA. It works!
 

1 more replies
Answer Match 42%

Hey,

Are their any known troubles or concerns with drivers properly running on XP pro 32 with 4 GB of Ram? I ask this as I know some who is getting random blue screens and he is running a computer with above specs when running an audio application that required drivers. I have read elsewhere XP32 has a tough time when 4GB is installed is this factual?


A Microsoft response would be great and much appreciated,I am also open to anyone with knowledge regarding this instance.

Thanks,

Matt

More replies
Answer Match 42%

I am using an Asus P5W64-WS MB, XP Pro SP3, and an older 74GB WD Raptor. I've never really messed around with doing the "F6" installation of RAID drivers when installing XP. Instead I've always just selected the default in the BIOS where the SATA drive is treated like an IDE device and I did not have to install the drivers during OS installation. I currently see under a speed utility that my Raptor is giving transfer rates of 85MB per sec. maximum, 24 MB per sec minimum, and 73 MB per second average.

My question is this - what sort of improvements might I see if I did a clean install of XP Pro and configured the drive as an SATA drive using the F6 driver installation option during install?

Also, is it worth going to a RAID 0 configuration if I am going to do the SATA thing? I would be using the ICH7R controller for that.

Finally, what does the AHCI option allow, and is that used with the IDE or F6'd SATA driver installation?

Thanks for any help.
 

A:IDE vs. F6 SATA driver install on WinXP Pro & Speed Improvements?

The HardDrive is working off the same speed on PATA or Sata.
The F6 is usually used for Sata Drives that require extra drivers
The Raid 0 is not the safest idea, and in actual fact normally I would say, don't do Raid anything if you're unsure.
AHCI info found here: http://en.wikipedia.org/wiki/Advanced_Host_Controller_Interface
 

6 more replies
Answer Match 41.58%

I Have Tried 3 Different Multifunction Printers And Cant Seem To Get Any Of The To Install When Usb Is Plugged In To Printer Upload Seems To Fail I Have Disable The Start Up, Virus Firewall Etc . To No Avail Will It Let Me Load I Have Also Went An Bought New Cable Tried All 4 Usb Ports In Back
Nothing Helps

Im Getting Desperate Now
 

More replies
Answer Match 41.58%

I've been having problems installing a driver for HP890 driver for Win98, on a networked WinXP, as an alternate driver. Where can I find other files, or another method (the original CD files don't seem to work), that'll install the alternate driver in my WinXP Professional?
 

More replies
Answer Match 41.58%

I needed to Upgrade W98SE -> WinXP Home on my Eurocom (A.K.A. Sager, or, Clevo) laptop.

A clean install was not expedient, and I now have no way to make a W98 boot floppy.

I installed a WinXP Home Upgrade v.2002 CD, followed by SP2 (exe), followed by SP3 (exe).

The Eurocom 2700C dropped off my network the moment the Update was 1st installed & it thinks it has no NIC. My USB ports still work, thank goodness.

Eurocom 2700C; P-III 733, 512MB RAM
Info from a snap taken by Belarc Advisor right before the Upgrade.

"Gericom SiS 630S
Board: KAPOK SiS 630S
Efficient Networks P.P.P.o.E. Adapter (NTSP3)
Infrared PnP Serial Port (*PNP0510)
SiS 900 PCI Fast Ethernet Adapter
primary Auto IP Address: 192.168.0.145 / 24
Gateway: 192.168.0.1
Dhcp Server: 192.168.0.1
Physical Address: 00:90:F5:07:44:74

Networking Dns Servers: 216.254.141.13
209.90.160.220 "
12-11-2004 02:35 PM

A:Network Driver problem: Upgrade W98SE -> WinXP Home

Quote:





Originally Posted by WSBoyd


A clean install was not expedient,




What does that mean?

As you have seen in the other thread...upgrading an operating system...comes saddled with problems.

Being as it is something I have & will never attempt...I don't have any experience that I can help you with...

Good Luck...

1 more replies
Answer Match 41.16%

I just bought a new laptop for someone and it has Windows 7 on it. But I ask to have Window XP installed overtop it since he's not used to Windows 7 and the transition would be too much for him (they couldn't just have Windows XP by itself because the hardware doesn't support it).

I seem to be having a problem installing the driver for his printer now, and I think it has something to do with the dual layers of operating systems.

Let me explain:

While inside Windows XP, I try to install the driver (I've made absolutely sure it's the right one) and I get to a stage where it tells me:

Step 1: plug the USB cable into the computer and the printer.
Step 2: Turn on the printer.
Step 3: Wait for the installation to continue.

Step 3 never happens. It just sits idle forever. I know it's responding to the printer because every time I turn it on/off, I get that "ding-dong" sound from the computer (also whenever I plug/unplug the cable when the printer is on).

After a few trials without success, I tried installing it on Windows 7. It worked.

I figure probably what happened was that upon turning on the printer, it was able to inform Windows 7 of its presence (because Windows 7 is the de facto OS), but this information failed to be relayed to the virtual Windows XP running on top of it.

Here's my question: now that I have it installed on Windows 7, is there some way I can go into Windows XP and inform it of the new driver and/or where it ... Read more

A:Solved: running virtual WinXP on Win7 and can't install printer driver

I am going to assume you mean you installed XP Mode in Windows 7.

This document explains how to get the printer working in XP Mode.
http://www.microsoft.com/downloads/...63-52f8-4cf5-a7d5-7abaab270451&displayLang=en
 

2 more replies
Answer Match 41.16%

Help Cpc2004 ! ! !

I have another one of those problems this forum is full of.. but for the life of me i cant figure it out.

My computer just restarts flat out in windows xp (running SP2 also)..
its really frustrating.. then after it restarts it'll say 'windows recovered
Error code 1000000a, parameter1 426b7000, parameter2 000000ff,
from a serious error' and error caused by device drivers blahblah...
but that doesnt help me that much..
All it gives me as found in a windows log file:
parameter3 00000000, parameter4 804e2e58.

I also added 2 attachments of my windows\minidump folder, are
they automatically the files concerning the crash?

1 more thing it kinda sounds like my hard disk powers off, and powers back
on judging by the sound of it because it sometimes takes a few seconds to
auto re-poweron the computer... which it does...



Help would greatly be appreciated
Bounty
 

More replies
Answer Match 37.8%

First time poster, so may be editing this post as I re-read FAQs with help of caffeine and realize that I've missed something.

I have a Lenovo Thinkpad T61 running Windows XP SP3. It was left undisturbed for all of today as it ran a scheduled virus scan (I use AVIRA, and the scan was clean as of 7:00PM.) When I returned to the computer I re-connected to my secured wireless network. Windows advised me that I had a "limited/no connection" so, as prompted by toolbar, I selected "Repair." At that point I got BSOD'd with the error message "a driver has overridden a stack-based buffer." Successive restarts under Last Known Good Configuration were unsuccessful.

After reading a 2008 Vista thread about this same BSOD error I booted up in Safe Mode and am running MalwareBytes and another virus scan, neither of which has come up with anything thus far. (It was that thread which led me to post this in this forum; it seemed that the problem there was due to malware.)

I should probably add now that I'm an intermediate computer user. This is my first time using HijackThis and my first in-depth manual virus/malware removal, so I may ask you to phrase things in basic terms for me, but I learn best by doing things so at the very least this will be a good learning experience for future. Or I could just stop running Windows and solve most of my virus problems.

Thank you in advance for your help. I will update this post if I make any headway on m... Read more

More replies
Answer Match 36.96%

how to install winxp pro on a stripe dynamic disk created by winxp pro also?
thanks in advance =)

More replies
Answer Match 36.54%

?? i NEVER had WinXP Professional on this machine, i dont even possess it ... what can i do?
 

A:SFC /scannow wants me to insert WinXP Professional CD, but i got WinXP home ???

6 more replies
Answer Match 36.54%

I recently built a system (not exactly state-of-the-art) to replace the aging box I had been using for a few years. I got a mobo that would support a SATA hard drive so I could enjoy the faster access and high volume. I bought a 160Gb SATA drive and got a sealed OEM version of XP Pro from the internet. I put it all together and loaded the OS, activated it online and loaded up all the updates. I slaved the old hard drive and transferred all my data to the new drive and life was good for a couple of weeks. Three nights ago, I was at the computer and got the proverbial BSOD (blue screen of death). I shut down and attempted to reboot....at least 10 times with every option..no joy.

Enough history........here's the problem:

I have a legal copy of WinXP on a HD that won't load Windows and is slaved as a data-only drive. My emergency 60Gb backup drive (new master) has a copy of WinXP that is of "questionable origin" and that has never been activated officially that I got from a guy at work.
I want to "legalize" the current XP installation by booting from the legal XP CD and repairing the installation from the menu........Can I do this without losing data?? Or, is there a better way to get legal?
 

A:WinXP Pro bogus to WinXP legal without losing data

6 more replies
Answer Match 36.54%

Hey guys, your help and expertise will be greatly appreciated... I'm desperately
in need of assistance here...

Recently my comp is totally wrecked up, programs doesn't run like they ought to and
startup is a total havoc. My comp is also stuffed with alot of useless info and programs
and I think it is in serious need of reformatting. However I'm a total comp *****
in this and will need your CLEAR and CONCISE step-by-step explaination... sigh

This guy set up my comp for me bout 2 years ago and when he installed WinXP Pro,
i kinda remebered he ****ed up something regarding partitions. Think he made another
partition and thus my comp has been running on 2 partitions but actually only in
fact i'm utilising one... cuz its showed i only have 1 harddrive (c

So right now, i'm pondering how to totally delete EVERYHING from my comp... is tat
reformat of harddrives? I wanna wipe everything out from my comp, like its totally
cleaned and then starting from scratch, reinstall my WinXP Pro again... how can i
do that? And also considering my problem about partitions mentioned above, I would
wanna merge them together and fully utilise the 2 partitions as 1 after i reformat.
How can i do that? I really have no idea at all... I've tried searching for similar
topics but learned little from those replied suggestions.
 

A:How to Reformat my Hard-drive and install WinXP Pro again? I am currently using WinXP

Hello and welcome to Techspot.

First go into Bios and find the boot menu make sure it is set to boot from Floppy first(if you have a floppy drive) then your cd rom then your Hard drive.

Put your windows Cd in your cd drive and save and exit from Bios.

1. Start your computer from the Windows XP CD-ROM. To do this, insert the Windows XP CD-ROM into your CD drive or DVD drive, and then restart your computer.
2. When you see the "Press any key to boot from CD" message, press any key to start the computer from the Windows XP CD-ROM.
3. At the Welcome to Setup screen, press ENTER to start Windows XP Setup.
4. Read the End-User License Agreement, and then press F8.
5. Follow the instructions on the screen to select and format a partition where you want to install Windows XP.
6. Follow the instructions on the screen to complete Windows XP Setup.

Please note that during setup your computer will reboot. When it does you will be asked to press any key to boot from cd DO NOT press anything otherwise it will just start the setup again from scratch.

Regards Howard :wave: :wave:
 

8 more replies
Answer Match 36.54%

Hello all,

I have a very old computer currently, and I'm going to get a new computer. My current computer is VERY fragile - as an example, about two years ago I added an additional stick of ram, and this somehow caused my winxp install to become corrupt, and I lost everything on my hard drive. I still have no back up of my files that are on the computer now.

In getting the new computer, It will have at least one extra hard drive that will be used to store backups.

Basically, I want to be able to transfer all my files from the old computer over to the new computer. The old one uses Winxp Home, and the new one will have Winxp Pro. (no, not Vista. Repeat - no Vista)

Will I just be able to plug in the new computer to my Linksys router that the old comp is connected to, and transfer over all the files from my old comp to store as a backup on my new comp? (and, what kind of things would I need to do to make this happen?) (my current computer is connected to the router for internet through the ethernet port, and the new comp would do the same thing)

I'm somewhat computer literate, but have NEVER networked anything together. Thanks!
 

A:Transfering files between 2 computers - WinXP Home to WinXP Pro

Here's a wizard way to enable file and printer sharing on XP machines.

Run the Network Setup wizard (found in Control Panel of XP). Tell it each of your computers connects to the internet via "residential gateway" and that you want to enable file and printer sharing. Create a disk at the end only if you have a Windows PC other than XP or 2k Pro or Vista.

Windows XP firewall (if SP2 or SP3) will be properly configured by the wizard. You must uninstall or properly configure any 3rd party firewalls on each machine. Unique computer names and same workgroup, of course.

The Shared Documents folder is automatically shared. Any other folders (or drives) or printers you want to share, just right click on them and sharing ... . When sharing a printer, accept the offer to load other drivers if your other PCs have different Operating System(s).

When you first go into My Network Places there will be nothing there. The first time you click on 'View Workgroup computers' will probably result in great disappointment. It takes awhile (up to 15 minutes) before all the computers in the workgroup get up-to-date and accurate lists of the other computers. Often you can speed up this process via Search for other computers.

When computers show up in My Network Places, double click on one to see its shares. If that includes a printer, you can right click on the printer to connect to it.
 

1 more replies
Answer Match 36.12%

How do I merge winxp hotfixes so as to create a new winxp sp2 cd with all the hotfixes?

Thanks in advance

A:procedure for slipstreaming winxp hotfixes into winxp sp2 cd

Use nLite

1 more replies
Answer Match 36.12%

Hello - I'm hoping someone can help me here...

(For info I'm running Windows XP SP2)

Problem 1) I've recently discovered that I hae Pipas.a virus which I can't seem to remove. I regularly run Spybot S&D and SE Adaware, also run Macafee Firewall and Virusscan and generally keep the PC spyware free. How can I go about removing Pipas.a?

Problem 2) Real player doesn't seem to want to stream anything anymore, saying 'Cannot detect Winsock - please remove old internet software and start again' - WMP streams OK but not Real Player. I've tried the 'netsh reset winsock cataogue' but the problem comes back, particularly when Mcafee tries to update and says the winsock is incorrect and attempts to load one for Windows 95!!

Problem 3) When trying to use the guided help on the Microsoft website to correct the Winsock error I get 'TCP/IP setting is incorrect'

Can anyone help - I'm tearing my hair out here!! Recently had a couple of viruses picked up and removed by Mcafee, also a couple removed by Spybot and when this happened it seems like I lost my previous System restore points...

Any help would be fantastic!

Paul

A:3 problems with my WinXP [Moved over from WinXP forum]

Paul, the fact that your pc was found positive for a virus, makes it imperative that we deal with this issue before anything else. Please follow the instructions of this thread: http://www.techsupportforum.com/secu...kthis-log.html, and post your resulting HJT log in this part of our forum: http://www.techsupportforum.com/secu...this-log-help/

We'll deal with any remaining issues after you are deemed clean by the Security Experts.

17 more replies
Answer Match 36.12%

Having a major problem. Re-built a PC for someone:
*new*ECS M400 board
*new*512mb DDR
Kyro II 64mb vid-card
Western Digital 40gb HD
Lite-On DVD burner
32X CD-Rom
56k modem
AC97 onboard sound
1ghz Athlon

Went to boot up just to make sure everything worked and it would get to the XP slpash screen (with the blue staus bar). As soon as it tried to initialize the desktop/log-on screen it would shut down immediatley.

Booted from the WinXP cd to do a new install. Made it to the "ready to install" screen (options to press ENTER oto install, repair etc..). It dies immediatley if you press enter.

Removed the HD and placed it in another PC and did a quick format. Placed back into case, tried to install from the CD again...same result.

Apparently the boot sector on the HD remains as when I tried to boot up it said something to the effect of "NTDLSR.??? not found ctrl+alt+del to restart"

After all this I discovered that it (previous XP install) may have been infected with a form of the sasser virus (lsasse.exe errors). So do I need to do a full format, and could this be causing the shutdowns whenever it tried to boot originally and now when it tries to access the HD to do a fresh install?

Whew!! That was a mouthful!!

Thanks in advance for any help!
 

A:PC shuts down at WinXP startup, can't reinstall WinXP

look to your bios settings. remember to disable cpc override, if given the option. if you truly think it's the hdd then download and run a utility that wipes the drive completely.
 

6 more replies
Answer Match 36.12%

I was reloaded a valid copy of winxp pro sp3 onto the hdd from my friend's pc. I took out the hdd and find out i am now dual booting winxp pro. I get a /system32 file error. Says its missing. I will put exact wording soon. I cannot go any further. Also the winxp pro won't boot unless the hdd is plugged into the pc. Please any help would be greatly appreciated. )

The error message i receive is...

Windows could not start because the following file is missing or corrupt.
<Windows root> \system32\hal.dll
please re-install a copy of the above file
 

A:Loaded winxp pro onto different hdd now can't load winxp home on different hdd

Welcome to TSG!

So if I'm following, you took a hard drive from your friend's PC, installed it into your PC running XP Home as a 2nd drive, then installed XP Pro onto this drive.
Your friend's system won't boot, and your system offers the choice of XP Home and XP Pro. XP Home should still work, but XP Pro will fail if your friend's drive is not installed in your PC, correct?

Assuming your system had only one partition and one drive.
The files that start the OS are on your C drive, they were not installed onto your friend's hard drive.
This can be fixed, but XP Pro will see itself as being on drive D, not drive C
If the hardware is different, you'll need to do a repair install to get it to work though. Easier to just start over.
Your system should still boot to XP Home, but will have the choice for XP Pro. This just needs to be removed from the boot.ini file.
You best bet is to start over and do the XP Pro install with the drive installed in your friend's PC
To remove the XP Pro entry from your system (with your friend's drive NOT installed):
Click Start | Run, type msconfig, press Enter
Click the BOOT.INI tab
Click the Check All Boot Paths button
It should find the XP Pro line as invalid, and offer to remove it.
Click Yes.

HTH

Jerry
 

3 more replies
Answer Match 36.12%

I'm having a heck of a time getting three systems to network consistently.

Previously I had a WinXP Pro desktop cabled to a Win2k Pro laptop and was able to get them to see each other over the connection but was never able to get the laptop to share the desktops internet connection, (DSL).

I've installed a wireless network and added another laptop running WinXP Home. All three systems can see the internet connection on the router.

None of these systems can see each other on the network. I get a message saying MSHOME is not accessible.

I don't believe there are any technical problems here, (although I will stand corrected if need be), just my lack of understanding of how networking these OS's works.

I need a good tutorial on networking that covers this mix of OS's. Can anyone help direct me to such a site?

Thanks ...weeG
 

A:Networking WinXP Pro, WinXP Home and Win2k Pro

11 more replies
Answer Match 36.12%

I know there is an option in WinXP to recover lost system files using the WinXP CD and choosing the upgrade option while installing. It has worked for me many a time. Is there a way to do it in a non booting WinXP....Here what I mean is an Xp which has got some files corrupted so badly that it wont boot.

Am just trying a new method for it. Will come up with it later. But for now can you people let me know if already there is a option to do that.

A:Repair install WinXP in a non Booting WinXP.

Did you try Disk Defragmenter?

7 more replies
Answer Match 34.86%

hello,

i am using win xp sp2 and when i scan using "adware away" i get two conditions which give me dounts

"\??\F:\WINXP\system32\csrss.exe
\??\F:\WINXP\system32\winlogon.exe"

I would like to know wht is this ?? for in those 2 lines....because as far i i know thr should be no ?? present before them.

Is this any sort of virus, trojan or keylogger.

How should i rectify this.

regards,
rahul
 

A:\??\F:\WINXP\system32\csrss.exe on winxp

10 more replies
Answer Match 34.86%

Hey all ...

After reformatting and reinstalling XP on a Dell I've run into a strange behavior I've not seen before. Sometime after I finished installing the drivers for the system I am seeing this intermittent window that says (to the effect) certain system files have been modified and Windows needs the Windows SP2 disk inserted. When I do this, the message goes away. In fact, the message will go away on it's own sometimes. However, this intermittent message does keep popping up. At first I thought it was only when new hardware was added. Now, the user of the machine told me it pops up when they open IE (sometimes). It's usually followed immediately by a few pop ups say "windows protection error" (no not a blue screen, just a window that you can close out) and in that window it warns that the Windows disk is not inserted.

The only difference with the Windows install on this Dell (vs. all the others) is that I used a homemade install disk with the SATA drivers slipstreamed onto the disk. I'm not sure if this has anything to do with it. I installed the remaining drivers onto the system immediately after install so I'm not sure if this prompt/error existed before, after, or both before and after I installed the additional system drivers.

Anyone seen something like this before? Remedies? Thanks much in advance!
 

A:WinXP SP2 keeps prompting for WinXP SP2 disk?

What SP version is on the CD?

For example, if you have SP1 on the CD, upgraded to SP2, this is typical of what you can see.

Also if the install location in the registry is incorrect, you can also get this error.
 

3 more replies
Answer Match 34.86%

I just got a 'new' (actually it's used!) computer that has a faster processor than my old one. Basically, my old computer has a 2.2 GHZ pentium 4. The 'new' computer has two cpus at 3.0 GHZ. Ideally, I'd like the new computer to have everything the old computer has on it. But the old computer's O/S is winXP home, which won't recognize two cpus, correct?

Is there a straightforward way to accomplish this? Or do I have to reinstall the programs, and transfer all the files? Can I upgrade the winXP home to winXP pro, and then clone the disk? I guess that would cost some bucks for the upgrade?

Thanks for your advice / help!
 

A:How migrate from WinXP home to WinXP Pro?

Does your new computer actually have two separate physical processors in two sockets or a single physical processor that appears as two? XP Home can use multiple logical CPUs no problem.

A bigger issue is the fact that the XP Home install has the drivers of your old machine. If you try to boot that on the new one, it will not boot. You would have to do a repair install.

House cleaning good. IMHO you should just do a clean install on the new machine. Copy over the needed documnets. Reinstall only the programs that you actually use and need - forget all that rubbish that you have collcted on the old.
 

1 more replies
Answer Match 34.86%

Hello,
I just installed a second WinXP in the same partition on my notebook; with other words there are now two WinXP OS on the partition. Both do fine. I want to get rid of the one which was first there. Before im going to do that I want to be able to access all the programs which are running under the first WinXP OS. How can I achieve that?

More replies
Answer Match 34.86%

With a system running WINXP home I would like to change to WINXP pro. Will the pro version pickup the programs with settings as they now exist if I install over the old system?

In my first trial it did not work. Pro replaced home but did not pickup the programs, requiring reinstalling everything.
Richard C. Meyer

A:Installing WINXP pro over WINXP home

I don't think it should keep any installed programs, etc, as I don't think an in-place install is suggested for Home to Pro.

I would suggest using the Files and Setting Transfer tool in windows - information on usage here

3 more replies
Answer Match 34.86%

Hello, I am trying to help my brother fix his computer, which is a Compaq Presario running WinXP Home. Apparently while surfing the net he was suddenly barraged with pop-ups and attempted installs. There were so many he could not remember what the attempted installs were. To stop this, he tried using the task manager to end a lot of the pop ups that kept coming back up after closing them. While doing this, Norton Anti-Virus came up with a Bloodhound warning then quickly disappeared on its own. This was followed by a new dialog box (I'm assuming it was a dialog box from the way he described it to me, it did not sound like any log off window I have seen before) that prompted him to log off. He logged off and is now unable to log back in.

The computer boots to the blue login screen, but there is nothing there except the WinXP logo. He has control of the mouse but no keyboard input seems to work (though he does have power to the keyboard). We have tried booting in safe mode, command prompt, and last known config, but get the same thing. The computer ignores the restore CD during boot, and we have verified the CDROM as the first boot device in BIOS. Any ideas?

Let me know if you need more info. I have tried to be as thorough as possible but am not at his computer. We are communicating by phone and he does not know a lot about computers in general, so sorry if the details are somewhat vague. Any help is appreciated.

E.
 

More replies
Answer Match 31.5%

I have had BSOD for a while and being super busy I did not have time to look at it and get it fixed. Well Being a computer guy I assumed I could fix it myself. But with tons of research and trying to use every guide I can find I decided to try here(probably should have came here first). Today I started Driver Verifier and having it check all drivers. It crashed a couple times before I realized it was a process I had to stop. I then came here to try and get some help sorting out the driver. Thank you in advance for any and all help anyone provides.

A:Multiple BSOD. Driver Verifier Driver caught a driver corrupting

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80083058f8, 0, 0}

Probably caused by : AuthenticAMD

Followup: MachineOwner
---------
0x124's are typically related to a hardware issue and can only be isolated by stress testing the major components.

If overclocking, reset all overclocks back to their default settings and then follow these:

RAM - run for a minimum of 8 consecutive passes
RAM - Test with Memtest86+

CPU - run the HIGH test
CPU - Stress Test Using IntelBurnTest

Video - run the FURMARK test for 20mins
Graphics Card Problems - Diagnose
Video Card - Stress Test with Furmark

Storage - run the SHORT test using the DOS version
SeaTools for DOS and Windows - How to Use

1 more replies
Answer Match 31.5%

Hi,

Hope you can help. I have a laptop running on winxp sp2. Recently I'm having problems with it: upon boot up, the winxp logo appears normally but it takes about 2-3mins before it reaches the novell login screen.

My issue has already been cleared by Reid in the HJT forum . No malware-related problems were found.

Hope you can help.

Thanks.

A:winxp slow from winxp welcome screen to logon screen

Take a look at the following checklist...

http://www.ithowto.com/novell/clientspeed.htm

1 more replies
Answer Match 30.66%

I have this problem:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

and now I am not able to connect any usb device to my laptop making it virtually impossible to use windows 10.
How do I downgrade to windows 7,have enough of the beta testing.
I even have a purchased version of windows 10 pro which I really regret buying, worst investment ever.

More replies
Answer Match 30.24%

.I reprogrammed my laptop Samsung with the model code NP-N102S-B02NG. so when I'm connecting my laptop to the wi-fi i cannot connect because it has no driver for Ethernet and Network Controller driver. so I waana ask how can I have those driver?
I need your help so that I can already use my laptop. thankyou

More replies
Answer Match 26.88%

Hi,

All of a sudden the Windows Driver Foundation - User-mode Driver Framework service is set to Manual in Services.

I clean installed Windows 7 a few weeks ago and my system is clean (as far as clean goes) as in only 15 programs installed (of which 5 x NVIDIA). I use this computer for work and I don't want anything else.

I checked that service and a few weeks ago it was set to Automatic.

My questions are:

1. Any idea what may have caused this value to change? I'm pretty sure this is related to a USB drive.

2. Could it be the case if you install an old USB drive it somehow messes up the value?

3. What does this do anyway? I read on Black Viper it manages user-mode driver host processes:

User-mode driver framework is a method of having drivers ran in ?user space? instead of ?kernel space.? This provides better system stability due to a situation of a driver crashing, it only brings down the driver and not the system. Such possible devices include cameras, media players, PDA?s and other USB connected devices.

4. Should I set it back to Automatic or leave it as is?

Thanks in advance!

More replies
Answer Match 26.88%

Okay so, my laptop's system is unable to boot, so I just tried to format it since I have to do that for a very long time, and when it asked me in which partition I want to install windows there was nothing, although when I clicked "Load Driver" I could access the hard disk's files, the hard disk IS listed in the bios normally but windows does not recognize it, I tried using Kaspersky Rescue disk(the only CD I had along with the recovery disk)and when I used the File Manager, the hard disk still didn't show, are there any drivers I have to install?I have burned both fujitsu
9that's my laptop) and Seagate's websites and can't find anything, I have searched forums but the only answers were
"check if your hd is listen in bios".So, it IS listed in bios but I can't reinstall windows nor access it, any suggestions?

A:No drivers found. click load driver to provide a mass storage driver f

Nevermind, I sent my laptop to a technician and he told me I burnt the hard drive by destroying some cables while cleaning with compressed air.

1 more replies
Answer Match 26.88%

Hi Everyone, 

I have a customer who has a Xerox WorkCentre 5890 which is currently installed on a server and shared out .. Normally you just browse out the server double click and it installs , but this I got the following error .. "Printer Driver was Not
Installed Unable to Find a Core Driver Package Site" .. 

I have checked add / remote programs and found no other printer let along Xerox installed .. I have even tried logging into the computer in question as the admin and same error .. I even ran chkdsk, tried to install it by ip address, downloaded
the latest drivers from Xerox and every single time I get that error .. 

The funny part is its only this one computer that is giving me the trouble , all the other computers it install fine with now trouble .. I have ran windows update and all the updates are installed, its running SP1 .. vaild copy of windows .. 

So i am at a lose other ran doing a wipe and reinstall .. Any thoughts ??

More replies
Answer Match 26.88%

http://oi44.tinypic.com/2qjyjbd.jpg  Here is the screenshot of what happens.
 
http://speccy.piriform.com/results/Gi3xLcolBqg2cZMTWdtgWZQ  Here is information about my computer.
 
 
Thank you, any help would be really appreciated. 
 
 

A:Display driver Intel Graphics Accelerator Driver Vista(R) stopped responding.

I tried installing drivers but it failed to install and I proceeded with restarting anyway. Actually I  was goggling my problem and came here because someone had similar issue and was solved. I figured if he got it solved, why not try this website.

4 more replies
Answer Match 26.88%

Is there an easy way to determine and point out the offending driver when there are BSODs that mention a driver is to blame, so I can uninstall it? The BSODs all say "DRIVER_IRQL_ (less or not equal to, something like that)" and this is after just reinstalling Win XP on my laptop, so one or more of the many drivers I installed must be to blame. I'm looking for a way to pin-point the problem driver(s), not roll back and carefully install only what I need.

A:Is there an easy way to determine and point out the offending driver when there are BSODs that mention a driver is to blame, so...

Restart your computer and rapidly press F8. it should present you a blue screen with a few choices. Choose the first one and then again rapidly press F8. It should give you many options, choose start in safe mode. Then, at Start choose Control panel and open admin tools. Choose computer managament. Open device manager, and select the device which has ! mark next to it, and uninstall it. It should work then.

4 more replies
Answer Match 26.88%

So anyone got any ideas for this issue? It seems as if though its not hardware related and more driver/software related. I've put my cpu at stock settings underclocked my graphics card changed ram timings and this is a new set of sticks since i replaced them following someones post saying that that was their issue so gave it a try but apparently it isn't go in safe mode uninstall drivers run driver sweep reboot reinstall nothing problem persists and yes i do have the latest mobo/vid drivers.

[CPU] Intel? Core? i7 CPU 920 @ 2.67GHz (8 CPUs), Overclocked~4.2GHz
[RAM] 6GB Corsair Dominator DDR3 1600 Triple channel
[MOBO] Asus Rampage II Extreme X58
[GPU] GTX 285 SSC X2 SLI 740/1660/2800
[HDD] WD Velociraptor 300GB x2 raid 0 stripe
[PSU] Corsair 1000HX
[SC] X-FI Titanium
[Case] Lian Li PC-P80
[OS] Windows Vista? Ultimate SP1

Everything looks in order?

More replies
Answer Match 26.88%

Hi good people,

So, I'm on here like thousands of others with intermittent wifi issues. I upgraded from 8.1 to 10 yesterday and everything works very well except for losing my wifi connection every 30 minutes to an hour.

My wireless adapter is a Broadcom 802.11n
the driver I'm using is Broadcom version 6.30.223.256

I've updated the drivers and the same loss of wifi happens. I've rolled back the drivers and the same loss of wifi happens. I've even tried a driver directly from the lenovo site that is a Cybertan Liteon driver that is the latest version for windows 8.1.

I've also unchecked the box in the power management page. Then rebooted.

I've also used all the commands, in the command prompt admin that start with 'netsh'. Then rebooted. The same thing still happens.

So, I'm up for new suggestions including compatible drivers from different manufacturers.

I'm really hoping there's a Z585 user on here that has solved this issue. According to the Lenovo web site this particular laptop has the latest drivers on the site and none of them are working so far.

A:Lenovo Z585 losing wifi after driver update, driver rollbacks, 'fixes'

First, is your laptop supported for windows 10 on lenovo website.....meaning are there drivers and software packages for it? Have you tried downloading the 8.1 driver for it and then running it in compatibility mode?

2 more replies
Answer Match 26.88%

I am not sure if this is where it belongs, or if it is a Graphics Card issue. I have an Acer Aspire 7741z-4433 with an Intel(R) Pentium(R) p6200 (2.13 GHz, 3MB 1.3 cache). This only happens to me while I am playing The Sims 3. I have the game set on the lowest quality settings, even though my laptop "claims" to be HD LED, etc. This issue still happens. As you may know I cannot replace the graphics card as it is apart of the motherboard, and to buy a new motherboard with a better graphics card would cost more than a new computer. I have been the my manufacture's website and tried installing an update of the graphics card, and that didn't do the trick either. I am at my wits end, and I just want to play the game without it shutting down and freezing my computer. The reason I know the error is because I do Alt + Tab to get back to the desktop. The way it acts up while I am in game is the screen blacks out but I can still see the software's mouse, and then it blinks a couple times and then freezes completely, causing me to do a hard shut down. What can I do to resolve this issue?

A:Display driver Intel Graphics Accelerator Driver for Windows XP Stop

i havent found anybody that sells motherboards for acer with better a better graphics chipset. i would really like to have a better chipset tn this radeon express x1200.

1 more replies
Answer Match 26.88%

For about a week now i have been experiencing a problem. Anytime I try to watch a video on youtube or playing LoL,my screen blacks out and it either:
1.Recovers successfully and displays the error "Display Driver NVIDIA Windows Kernel Mode Driver Windows7, Version 347.25 stopped responding and successfully recovered
2.the screen completely blacks out and displays an error, and PC has to restart.
 
I am currently running windows 7 x64
8 GB RAM
Intel Core i7-2670QM
Please help As soon as possible!
Thanks in advance
 
And here is my Dxdiag Log result
------------------
System Information
------------------
Time of this report: 4/1/2015, 00:08:58
       Machine name: ASUS-PC
   Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.150128-1513)
           Language: English (Regional Setting: English)
System Manufacturer: ASUSTeK Computer Inc.
       System Model: N55SL
               BIOS: BIOS Date: 11/10/11 19:12:17 Ver: 04.06.03
          Processor: Intel® Core™ i7-2670QM CPU @ 2.20GHz (8 CPUs), ~2.2GHz
             Memory: 8192MB RAM
Available OS Memory: 8096MB RAM
          Page File: 4466MB used, 11723MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11
DX Setup... Read more

A:Display Driver NVIDIA Windows Kernel Mode Driver, Version 347.25

 
Please download and install Speccy to provide us with information about your computer.  Clicking on this link will automatically initiate the download. 
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
 
 

Please download MiniToolBox, save it to your desktop and run it.
 
Checkmark only the following checkboxes:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post.
 

10 more replies
Answer Match 26.88%

A while ago I posted about having problems with corrupted files, poor performance and blue screens. I've managed to fix most and the computer has been usable again. However it's not totally fixed. I very occasionally after logging on will receive a blue screen stating the following (last time this hapened was a couple of days ago).

A problem has been detected and windows has been shut down to prevent damage to your computer.

A driver has overrun a stack-based buffer. This overrun could potentially allow a malicious user to gain control of this machine.

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps:

Check to make sure any new hardware or software is properly isntalled. If this is a new installation, ask your hardware or software manufacture for any windows updates you might need.

If problems continue, disable BIOS memory options such as caching or shadowing. (or it was something along these lines).

Technical Info:
STOP: 0x000000F7 (0x00000004, 0x0000F35D, 0xFFFF0CA2, 0x00000000)

Tonight for the first time in quite some time while using the computer I received the blue screen error DRIVER_IRQL_NOT_LESS_OR_EQUAL and then right at the bottom it mentioned RNDISMP.SYS. So I rebooted, it was rather slow at booting up and then straight after logging on I got it again. After rebooting the second time all was fine all be it slow to start up again.

After doing some research my s... Read more

A:rndismp.sys driver-irql_not_less_or_equl and driver has overrun a stack-based buffer

13 more replies
Answer Match 26.88%

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

A:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

0 more replies
Answer Match 26.88%

Ok, I have a reasonable knowlage of computers, i have spent the last 4 days trying to fix my Phillips PSC805 Auruilium sound card.

I have recently put more ram in and a new video card (NVIDIA Gforce2 MX 100/200) its no the greatest but i cant afford new ones.I am running Windows XP professional. I have had the sound card and speakers for almost 2 years and they have worked fine untill this new hardware was put in.

straight after these were put in, My sound card went dysfunctional. it has power, but the aurulium sound agent 2 program will not install completely. it will begin to install but before long it will say, VDI32.exe has encountered a problem and must shut down. after that an error message appears saying "failed to obtain 805 bus interface" and directly after that "805 Registration failed!"

after this i attempt to open aurilum sound agent 2 and it states that "The QVE bus driver is not detected! Reinstall the Qsound virtual audio devices bus enumerator driver."

this message is also displayed on startup of my computer.

I am in desperate need of some help, Its driving me crazy. it also seems to be affecting other applications on my computer.

Please help.

Thankyou.

VV
 

More replies
Answer Match 26.88%

Here are my system specs

Athlon 64 X2 3800
Asus A8N32SLI Deluxe
2x Geforce 7800 GT
2 GB (4x512) Crucial Ballistics 2-2-2-6

Vista Ultimate x64
Nvidia Forceware 100.65

I experience a driver crash and recovery from time to time, especially when playing newer 3D games (primarily Lord of the Rings Online). Anyone else having any similar problems?

A:Display Driver Stopped Responding and Has Recovered - nvlddmkm nVidia Driver

Originally Posted by bataylor1314


Here are my system specs

Athlon 64 X2 3800
Asus A8N32SLI Deluxe
2x Geforce 7800 GT
2 GB (4x512) Crucial Ballistics 2-2-2-6

Vista Ultimate x64
Nvidia Forceware 100.65

I experience a driver crash and recovery from time to time, especially when playing newer 3D games (primarily Lord of the Rings Online). Anyone else having any similar problems?




Hi.
This driver it?s in beta version, remembered, only you need put in mode sli, only one GPU, and the porblem finish. I have 2x 6800, and y resolver with this way.

regards.

more replies
Answer Match 26.88%

I tried to update my older Radeon ATI 5450 GPU via windows update...

I received the message from windows update, and showed it failed update with the 0x800706be

However when I go to device manager and check the details of the installed driver it clearly shows the new updated version? So I wonder which is correct the device manager showing the new version of the driver or windows update?

A:Failed Update 0x800706be driver...but device mgr shows updated driver?

You can identify the problem using Device Manager, which you can access by:
Opening the Control Panel Window
Selecting and double-clicking System
Clicking Device Manager
In Device Manager check if there is an exclamation point, a yellow triangle, or a question mark against your Dell device. If there is, there is a problem with your Dell device.

2 more replies
Answer Match 26.88%

Hello,

After many many hours of searching forums for solutions I have been unable to find a solution to my problem - so I decided to open a topic of my own and hope someone can help me with my problem specifically.

My problem is similar to this topic, although the solutions posted there aren't working for me. In short: I have been experiencing random but frequent BSODs (16 and counting) with the message 'driver power state overload' being displayed.

In my quest for a solution I wanted to upgrade my drivers, when I noticed my Nvidia Geforce 650M graphics card seems to have disappeared. When I try to install the latest driver from Nvidia's website I get the error 'graphics driver could not find compatible graphics hardware'. Attempting to open the Nvidia control panel gives me the message 'An Nvidia graphics card was not detected on your system' and I cannot find the card listed in the device manager (only the intel HD graphics family is listed under display adapters)... To be clear: I'm quite sure my laptop SHOULD have this card, it's just not detecting it for some reason.

Since the symptoms of my problem are exactly the same as described in the topic linked above, I have tried to follow the solution described by Arc. Installed Driver Fusion, started in in safe mode and tried to delete Nvidia drivers - but nothing seemed to be listed here. I still clicked delete but not sure if this actually did something or not.

A:BSOD driver power state / Nvidia graphics driver problems

Hello Zephos.

As per the supplied data, this is the specification of your graphics.

Code:
Name Intel(R) HD Graphics 4000
PNP Device ID PCI\VEN_8086&DEV_0166&SUBSYS_21031043&REV_09\3&11583659&2&10
Adapter Type Intel(R) HD Graphics Family, Intel Corporation compatible
Adapter Description Intel(R) HD Graphics 4000
Adapter RAM (2.080.374.784) bytes
Installed Drivers igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32
Driver Version 9.17.10.2932
So, it says it is not nVidia. But as you are saying that it was Nvidia Geforce 650M, and it disappeared, the best option is to contract the vendor. I wish you are within warranty?

9 more replies
Answer Match 26.88%

Hi all,

I have a Toshiba Satellite S70-B-10T, buy in November 2014. Since December 2015 he began to crash when I play League of legend after the
loading wit the error : "display driver has crashed and recovered".
I am on windows 10 I try to bac on Windows 7 and Windows 8 but the problem remains the same.
I try uninstall the driver and install correctly the latest same problem.

More replies
Answer Match 26.88%

i really need some help. i went to hp/compaq website and and downloaded the chipset and graphic drivers and still these drivers remain uninstall-ed in the device manager. I have been reading everything about these boards and i have not found a solution yet! This is a fresh install of xp pro 32, sp3. if anyone out there can help me please do. I greatly need the assistance!
 

A:I Need Unknown device driver and ATI RADEON XPRESS 200 Series driver on SR2011WM

16 more replies
Answer Match 26.88%

Hello,

I would appreciate any help with the following problem: the pc sometimes seemingly randomly shows BSOD with errors named in the title, I also attach corresponding screenshots. The problem wont happen if the PC power is supplied from the adapter AND there is some content running on the screen (video in VLC f.ex.). Other important symptoms are: Can not turn off the laptop. There will be endless blue screen saying shutting down,while PC already stopped working. I also can not get the PC to sleep. If i I go to sleep mode, display turns black, PC is still working on and on and I can not go back to desktop anymore.

Thank you very much for your help.

Ales

More replies
Answer Match 26.88%

Welcome to Sevenforums
If you would go to device manager>propertie>details tab>drop down menu> hardware id.

Copy and paste the hardware id string for the missing hardware we can look for the drivers.

I'm not completely confident that we'll be able to find 64bit drivers for your netbook though but we can try.

Thanks Fabe

More replies
Answer Match 26.88%

Supports the following models of Sound Blaster X-Fi cards (except Xtreme Audio):

- Auzentech X-Fi Forte
- SB0460 / SB0462 / SB0463 / SB0464 /SB0465 /SB0466 / SB0468 / SB0469
- SB046A / SB046B / SB046C
- SB0550 / SB055A
- SB0678 / SB0679
- SB0730 / SB073A
- SB0760
- SB0772 / SB0773 / SB0775 / SB0776 / SB0779



Operating systems supported (32-bit and 64-bit editions):

- Windows XP / Server 2003
- Windows Vista / Server 2008
- Windows 7 / Server 2008 R2



Driver only

- X-Fi series driver 2.20.0000.20 (Auzentech X-Fi HomeTheater HD RC4) - Supports the DisableXRAM setting.
SB X-Fi Series / Auzen Forte driver 2.20.0001 - Ho... - Creative Labs

Mirrors: RapidShare

Works on my Xfi Gamer the driver is newer than the recent creative official / beta

A:SB X-Fi Series Driver/ Auzen Forte driver 2.20.0001 - HomeTheater HD RC4 (09/05/2009)

Quality is good!

1 more replies
Answer Match 26.88%

Hi, and thanks in advance...

Much of this is a repeat to other threads, until the graphic driver problem at the end...

(I also have an Ubuntu partition.)

I'd left my mp3 player plugged in overnight + an Asus Xonar DAC in a usb hub, when Windows wanted to do an update and conflict over drivers ensued. Strange, because I've selected for notification before updating. Also, have not been successful installing any new updates since the end of May. Was seemingly a common problem, I checked into it, too busy/lazy to pursue and succeed. This part is confusing...?

Woke up to blasting fans and unplugged everything peripheral. First, tried setting back to restore points prior to that night - twice. Could restart in Safe Mode and with networking. Then, could restart normally - but, shutdowns after 20 minutes or so.

Got crash logs, saw driver conflicts (not found) - saved.

Came here, read threads, did restart at Last Known Good Configuration. Restart - Nvidia Geforce driver not found. Went to Asus site, downloaded and installed driver (not lastest version, but last approved version and not much later than one that was installed).

It then went into a system cycled start/restart/etc. attempting to find driver, fix itself - forced to do shutdown to stop it.

Restarted this morning in Safe Mode, followed your instructions for posting. It's been running in safe mode for about 20 minutes now.

A:BSOD Windows 7 update mp3 player driver conflict, graphics driver

Hello welcome to SF .

Critical files are missing please run the SFDT again and let it run it's course.
Most dumps are corrupted, but the one that did survive shows
an extremely old graphics driver.


Code:
BugCheck 50, {fffffa9003d08920, 0, fffff88004caec07, 5}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys

Could not read faulting driver name
Probably caused by : nvlddmkm.sys ( nvlddmkm+47cc07 )

Code:
lmvm nvlddmkm
start end module name
fffff880`04832000 fffff880`0532ed80 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Thu Jul 02 10:40:25 2009
Driver Reference Table - nvlddmkm.sys
Please update your GPU driver :: Drivers | GeForce ::

9 more replies
Answer Match 26.88%

Hi all, I have a Dell M1530 XPS and what a nightmare I am having installing Windows 7 on it.
I go to install and get hit by this message
"No Drives were found. Click Load Driver to provide a mass storage driver for installation"
When I click next nothing happens I have the to cancel the installation.

I have tried pressing F2 to bring up the setup menu but do not know what to do from there.
I have had a brand new motherboard fitted from dell and now unsure what model I have now.
Using Belerc Advisor this is what it says about my system, any help would be great:
Processor a
1.67 gigahertz Intel Core2 Duo
64 kilobyte primary memory cache
2048 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threaded
Drives
247.18 Gigabytes Usable Hard Drive Capacity
146.89 Gigabytes Hard Drive Free Space

TEAC DVD+-RW DVW28SLC ATA Device [CD-ROM drive]

Ricoh MMC Disk Device (247.18 GB) -- drive 1, s/n 0001
 

A:o drives were found. Click load driver to provide a mass storage driver installation

Hi there

Some problems I had and that also BSOD alot was that the hard disc compability mode was set wrongly, if so you would not see the discs.

Check in bios for somwthing like "AHCI" mode and "Compability" mode.

Put it to compability as otherwise special drivers are neededm ones added you can swap this back to get more speed.
Regards

Ambrose...
 

1 more replies
Answer Match 26.88%

"display driver nvidia windows kernel mode driver version 332.21 stopped responding and has recovered"

Hello and thanks in advance for your help.

I am using a Dell XPS 8300 computer with the following specs:
Windows 7 Home Premium Service Pack 1
64 Bit OS
Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40 GHz
16 GB RAM
Graphics Card: NVIDIA GeForce GTX 560 Ti

Dell has attempted to help me with this problem. Prior to having this error pop up on my screen the computer would just have a blank screen at start up after the dell logo then the windows logo appeared. They had me run the computer in safe mode with networking and they have uninstalled all drivers and reinstalled them, they ran CCleaner and fixed all registry errors/cleaned out temporary files, they installed and ran Windows Security Essentials and got rid of any malware. Finally, they decided to send me a new graphics card. They had a technician come install the new card and run a diagnostic test and update all drivers. Everything seemed to be fine but when I opened a game on the system that uses the more intense graphics, the screen went blank again. I have not played any games since but while browsing the internet at random times, I get the error message from the title of this post. The screen will go blank for a few seconds then reappear with that message. I have tried to do some research and have found that the error is probably something called TDR. However, I am not an expert and I am clueless. Please l... Read more

A:display driver nvidia windows kernel mode driver version 332.21 stopped responding...

Can someone please help me with this?
 

2 more replies
Answer Match 26.88%

Hey, I'm trying to install a new copy of Windows Vista on my desktop. I get this message "NO drives were found.Click load driver to provide a mass storage driver for installai" right after the installation step of "which type of installation do you want?" I select Custom because Upgrade isnt bold so i'm not allowed to click it.

I have a HP Pavilion Slimline s3713w
Sn:3CR847138P
64bit

A:NO drives were found.Click load driver to provide a mass storage driver for installai

Hi -

Is this your system? --> http://h10025.www1.hp.com/ewfrf/wc/s...=3870526#N1740

If link does not work, paste this into web browser address bar -

Code:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3870526#N1740

I don't see XP listed as an OS for it. What OS came pre-installed?

Is the copy of Vista a full retail copy? If so, back up any files you need and wipe the HDD with KillDisk. Then try Vista installation again.

KillDisk --> http://jcgriff2.com/killdisk_imgburn.html

Regards. . .

jcgriff2

.

1 more replies
Answer Match 26.88%

I received this error (see subject line or below) this evening while using Adobe Photoshop CS3 on my Windows 7 (64-bit) system.

Error occurred while attempting to use the slice tool in Photoshop. The screen froze momentarily (1-2 seconds), the went black (1-2 seconds) and then came back to "normal" but with the error message in the bottom right corner of screen. If occurred 3-4 times within 2 minutes. I rebooted Photoshop and it has not occurred since, but I'm extremely worried since my computer is my livelihood and I cannot afford to be without it should it go down on me unexpectedly.

I had a local guy install this video card on my system 2-3 weeks ago: http://www.staples.com/PNY-GeForce-9600-GT-1GB-PCIe-Verto-Graphics-Card/product_784288?cmArea=SEARCH

Not sure if it is the culprit or not.

Here's the error again:

"Display driver NVIDIA Windows Kernal Mode Driver, Version 185.93 stopped responding and has successfully recovered."

Thanks in advance for any assistance that is provided.
 

A:Display driver Nvidia Windows Kernal Mode Driver, Version 185.93 stopped responding

Try downloading the latest drivers from nVidia click on support then download drivers, without knowing your exact Display adapter model i cant give you the exact page to download from
 

2 more replies
Answer Match 26.88%

emachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found. click load driver to provide a mass storage driver for installation. any healp well be highly appreciated. many thanks!!!
 

A:no drives were found. click load driver to provide a mass storage driver for installa

Is your drive listed in BIOS? It could be a hard drive failure. No drivers should be needed for Windows 7.
 

1 more replies
Answer Match 26.88%

Hi,

I was working with an audio recording software just now when I faced this error (in the subject line). The screen blacked for 10 seconds or so and then came back.

Also, I faced similar errors when I was using Power Point and a screen recorder software but the error was a bit different nvlkdm has stopped working. Also, I had just installed IE 9 beta (hardware acceleration), opened the first site and the system crashed and I had to do a hard reboot and unistall IE 9 to save my life from such errors again. The errors are just random. The nVidia drivers are downloaded the official nVidia and are the latest available for my DELL XPS M1530 with 8600M GT. (OS Win 7 Ultimate 32bit)

I also got two BSOD's at different time with a message saying:
"Unable to reset the display. A problem occured with the display driver driver"
I noted this error code on the blue screen
000000x16 nvlddmkm.sys
Dumping physical memory etc. etc.

There are no Minidumps being formed in Windows/Minidump (I just enabled them now), so I wasn't able to post any of them :-|
All temperatures normal, RAM test with Windows Memory Diagnostic/memtest/DELL Diagnostics pass, no overclocking.
However, I perfomed the stability test with Furmark for my grpahics acrd and the display started flickering with dots. Earlier when I installed the driver and had the performed the stability, it had ran absolutely fine for more than 20 min.
I read somewhere it can be an issue of Windows Update KB24548... Read more

A:Display Driver Nvidia Windows Kernel Mode Driver Version 266.58 stopped responding

Hi,
I unistalled the previous driver 266.58, clened using a driver sweeper. I installed the drivers that came with my system from DELL (At that time, I had Vista).
I installed the drivers in Compatibility Mode for Win Vista SP2. After this, when I performed the test, the system still crashed and I got this error on the desktop.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 8797F024
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
E:\Windows\Minidump\020711-32183-01.dmp
E:\Users\Sarin\AppData\Local\Temp\WER-56690-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
E:\Windows\system32\en-US\erofflps.txt

Here's the minidump file
020711-32183-01 Crash Dump File
 

1 more replies
Answer Match 26.88%

I have recently purchased Dell Monitor S2240T. It is full HD Monitor with touch interface.
I have windows 10 OS installed on my Dell Laptop, Inspiron 640M(2006 Model). Not having the HDMI or DVI ports on my laptop.  
Other Laptop Specification:
Genuine Intel CPU, T2050, Dual Core processor 1.60Ghz*2, 3GB RAM, 32 bit Operative system, x86-based Processor, 14.1" WXGA+ Ultra Sharp TFT Laptop Display, Intel(R) Media Accelerator 950 Graphics upto 224MB shared system Memory, Intel 945GM Chipset.

In order to get full Resolution of 1920*[email protected], I need to Install the windows 10 Chipset driver and video card driver. Right now the resolution is 1024*[email protected]
Kindly help me to resolve the issue so that I can get, full use of Newly bought monitor. Otherwise screen is blurry, whitish and pages open like spreaaad-sheet.
Please provide me link to download the aforesaid drivers or kindly suggest any other option to get 1920*1080 resolution.
Thanks

A:Windows 10 chipset driver and video card driver for Dell Inspiron 640M - 2006 model

You will not get win 10 video or chipset drivers for the old laptop since they don't exist, so you have to make do with lower resolutions on the new monitor. Touch will not work on the old laptop. Time to upgrade to a new computer!

3 more replies