Tech Problem Aggregator

Solved: Trouble Installing GeForce 6200 in a Dell

Q: Solved: Trouble Installing GeForce 6200 in a Dell

Hi all,

I recently got a larger monitor and decided to upgrade the graphics card from the integrated graphics that came with this machine.

I uninstalled the old driver and downloaded the new ones. When I installed the 6200, and connect the VGA cable to it, the monitor does not get a signal and goes to sleep. If I try to install the driver without the new card in, the program stops the install because there is no hardware detected.

This is an older machine. It is a Dell I got in Nov, '05...DIM3000 XP home SP3 pentium4 2.8GHz 2gb with an 80 gig hd.

If anyone can help I would be very grateful.

Thanks,

Steve

A: Solved: Trouble Installing GeForce 6200 in a Dell

Steve:

You need to install the video card and start the computer before you can install the driver for it.

You need to go into the BIOS setup and make sure the video adapter is set to match the video card connection type - PCI, AGP, PCI Express, etc.

You need to disable the integrated graphics device in the Device Manager.

Make sure you don't mistakenly connect the monitor to the integrated graphics port instead of the video card port.

------------------------------------------------------------------

You didn't say what the power supply wattage is in that desktop, but I'll assume it's sufficient.

I recently installed a NVIDIA GeForce 6200 AGP 256 MB video card in an 8-year old desktop that has a 160 watt power supply.

------------------------------------------------------------------

3 more replies
Answer Match 86.1%

okay i have had this NVIDEA graphics card for some time now. probably three years or so. it was working awesome until a virus hit my computer hard and i had to reset the computer to factory settings. my VERY old computer. it is a compaq presario. i have no clue what year. It even had a very old internet explorer. like 4 or 5. so anyways i have reinstalled my graphics card and now when i switch the monitor to the graphics card, the screen turns half black, and half white. can anybody help me with this problem?
 

A:NVIDIA geforce 6200 trouble

Can you explain the problem in more detail? What exactly do you mean by "when I switch the monitor to
the graphics card"? Also, what exactly do you mean by "I had to reset the computer to factory settings"? (system restore?)
 

1 more replies
Answer Match 81.06%

Today I bought a Geforce 6200 graphics card because my computer met all the requirements. When I installed in my computer and turned the power on there was a beeping noise and the computer screen was black. I don't know what I did wrong. My guess is my computer is not compatible or somethings up with the card or dirvers, I really don't know since this is my first time installing a graphics card. The requirements of this graphics card is: petium 4/III/II/celeron, AMD K6/Athlon. An Agp 8x or 4x motherboard. 256mb of memory at least. windows xp. a minimum of 250w power supply.
I have a AMD Sempron 3100+ 1.8ghz, an agp slot 3.0, 8x. a 250watt power supply. and windows xp. If you could help me out in any way I'll be very greatful. Thank you for your time.
 

A:Problems installing Nvidia Geforce 6200 agp graphics card

Power cable out
Push in the on switch (releasing all internal voltage)
Touch the frame of the computer (inside - and don't shuffle your feet -antistatic issue)
Take the card back out
Boot up with original onboard video
Go to system bios
Confirm 1st startup set to AGP
Change the meg to 256
Save and exit
Turn off the computer
Reseat the AGP card (push in securely - goes in a long way)
Put the monitor back to the AGP
Power cable back in
Turn back on
 

1 more replies
Answer Match 81.06%

my initial system config was intel845gvsr motherboard with no agp slot and my ram was384mb ddr,with processor speed 2.4ghz with which i could play splinter cell comfortably with low resolution(640by480)and low settings.now after upgrading to 845asrock motherboard,512mb ram and geforce fx 6200 (256mb ddr,256bit memory interface),when I am trying to play the same game on winxp or win2000,I get a higher resolution(1024 by 768) and high settings but there is a constant disturbing lightning like effect at background.please help me to solve this problem.
 

A:lightning like effect while playing games after installing geforce fx 6200

Howdy

Try the latest drivers
HERE
see if they help with the lightening problem.
Let us know how it goes.
G'Luck
 

2 more replies
Answer Match 81.06%

it has a 250w PSU

I've been trying to upgrade an old coimputer to run Windows 7, so far it works really great, but the intel graphics are really shitty, so I bought an EVGA GeForce 6200 256MB PCI card to install. problem is, whenever the card is installed the computer won't boot, and is stuck on this screen:

I pulled out the CMOS battery to try to reset it, but no dice.

help?

thanks.

A:Dell Gx260 will not boot when PCI GeForce 6200 card is installed

Dell bios's are very picky. You may need to change some Bios settings before you install the new GPU.

4 more replies
Answer Match 81.06%

Hi i am have a Dell dimension 3000 and i have been loooking for a new graphics card for my computer so as to play better computer games such as and namely:

LOTR: battle for middle earth II. :approve:

I have read a quite a few forums on availiable pci cards (My computer does not have agp or pci-e slots)

and so far the 6200 has come out on top.

I have also read that 128-bit is better than 64-bit and that supposedly the 6200 version only comes in 64bit.

but i have found a 6200 with 256mb and 128-bit.



I am wondering if the Jaton GeForce 6200 (PCI, 256MB)

will preform at the top of the range for PCi based on the fact that it is a nvidia 6200 and that it is 128-bit?

Also will it be able to play battle for middle earth II, and is this brand a very shody and not to be trusted brand?

Please if somebody has this card could they please tell me how it preforms?

and anyone who has technical knowledge look at the specs and assess this card?

It would be much appreciated.



can't do a link because its my first post but its product number is VIDEO-338PCI-LP
and the page i'm referring to can be found on Shopper.cnet.com under:
Jaton GeForce 6200 (PCI, 256MB)

:





here are the specs provided:

General

Device Type: Graphics adapter

Enclosure Type: Plug-in card

Vista Capability: This video card is capable of running the new Aero interface featured in Windows Vista Home Premium and higher.

Interface Type: PCI
... Read more

A:Dell Dimension 3000 Jaton GeForce 6200 PCI, is this good?

The Diamond Stealth Radeon X1550 PRO 256MB PCI will come out on top if you're looking at 128-bit PCI video cards =D

I THINK its the only X1550 128-bit video card.

Just do some research will ya?
 

19 more replies
Answer Match 80.22%

I just bought a 6200 PCI card, made by EVGA. I plugged it in and booted up my computer, popped the included CD in and installed the video drivers from the CD. I then installed the most recent nVidia drivers for the 6 series. and rebooted my computer. When I finished starting up again, I was at 640 x 400 with 4 bit colors, and it will not let me change the resolution or color quality.

I have been trying to figure this out for damn near 7 hours now. Lots of people have been saying I gotta do something in BIOS, but there is nothing about my video card in BIOS, so I don't know about that.

I'd really like to get this thing working, and I am really hoping that it is something I just forgot to do rather than a faulty card.

Oh yes, I am running on a Dell Dimension 2400
 

A:Trouble installing 6200 PCI

You forgot to uninstall the old drivers. ( Probably)
 

4 more replies
Answer Match 79.38%

First, I am running a Dell Dimension 2400.

I just bought a 6200 PCI card, made by EVGA. I plugged it in and booted up my computer, popped the included CD in and installed the video drivers from the CD. I then installed the most recent nVidia drivers for the 6 series. and rebooted my computer. When I finished starting up again, I was at 640 x 400 with 4 bit colors, and it will not let me change the resolution or color quality.

I have been trying to figure this out for damn near 7 hours now. Lots of people have been saying I gotta do something in BIOS, but there is nothing about my video card in BIOS, so I don't know about that.

I'd really like to get this thing working, and I am really hoping that it is something I just forgot to do rather than a faulty card.

I have tried disabling the integrated intel card, but that did not work.

EDIT:

I installed the beta drivers, and that fixed it.
 

More replies
Answer Match 75.6%

the card worked fine when i was using xp, but i recently upgraded to vista, and now its not working at all. my device manager gives an error for the card that says "Windows has stopped this device because it has reported problems. (Code 43)" bfg supprt didnt help much. and the card is vista compatible, so please help. when it comes to this stuff, im pratically a noob. here are some basic info about my computer (other than it sucks):
dell dimension 3000 series
OS: vista home premium
Intel Pentium 4, 3000 MHz
2gb ram
 

A:Solved: BFG geforce 6200 oc 256 mb ddr PCI

15 more replies
Answer Match 74.76%

Hi all,
I just bought the nVidia GeForce 6200 LE 256 Meg card.
I had the ATI 9600 128 meg before.
I launched World Of Warcraft and everythiung is crazy slow! even at resolution 1280 X 1200 (with my ATI I play at 1600 X !200)
I have the latest driver.

What is happening???
please, help!
 

A:Solved: nVidia GeForce 6200 LE

16 more replies
Answer Match 73.92%

I've had no problems for over 3 years with this video card but out of know where yesterday the driver started crashing and reboots, then about 15 seconds later it does it against and eventually just full out crashes and i have to reboot.

I havent done any updates to the OS or Driver in 2 weeks or so. So far I have uninstalled it and reinstalled the lasted one (after removing the previous one and double checking the files).

Ive installed every driver from 260.88 till the newest and still no luck.

It crashes when i open up device manager and some other various programs and tools and every game i have installed.

Anyone have any suggestions on how to fix this?
 

A:Solved: Geforce 6200 Driver Crashing (32-bit)

Guess ill just reformat...
 

1 more replies
Answer Match 73.92%

Just upgraded our pc to windows 7 and strange to see black lines on certain screens:-
log on screen at the bottom
Any question asked by win 7 the yes / no is blacked out unless you hover you mouse over it!
Git the latest drivers & got a new monitor

Thanks,

Ade
 

A:Solved: NVIDIA GeForce 6200 & Windows 7

7 more replies
Answer Match 73.92%

I have an Nvidia GeForce 6200 graphics card but dual view does not work.I only have to connect either vga monitor or an s-video cable for watching on tv.I can't use both at the same time.The single view also does not work.My system is a windows xp professional service pack3 32bit with 2gb ram.My motherboard is a Foxconn P4M800P7MA-RS2H(UYHP64700076) with Intel Celeron D processor.I've been using an Nvidia GeForce MX 400 0 before and it worked very well on my system.
 

A:Solved: Nvidia GeForce 6200 problem

The S-Video output will only output a clone of the primary display. I don't believe that the S-Video output can be used as an extended desktop. There are also resolution restrictions for S-Video (640x480...sometimes 800x600).

Dual View is for cards with multiple outputs (ie: VGA or DVI outputs).
 

2 more replies
Answer Match 72.24%

Hi could anyone recomend where i can get just a fan for this nVIDIA GeForce 6200 AGP Video Adapter card .

It is really noisy ,i have took it out and cleaned it and even added a little oil ..was quiter for a while then back again.

Cheers.,
 

A:Solved: nVIDIA GeForce 6200 AGP Video Adapter new fan needed

16 more replies
Answer Match 72.24%

Help! I can't get past this error message in my installation process.:

" Demo32 has caused a divide error in module QUICKTIME ..."

My System specs.:

System: Dell Dimension XPS(T) (desktop)
Processor: Pentium III (600 mhz)
O.S.: Win98 S.E. (32 bit)
H.D.: 30 Gig Maxtor
Memory: 384 MB (ddr1)

It says: "This program has performed an illegal operation and will be shut down."

I have Quicktime and Quicktime 3.0 on my system.

Any help you can give would be greatly appreciated...I'm trying to get some beloved old games running again. (I.E.,Thief(gold),Serious Sam(1st and 2nd editions),etc...
Thanks.
Steve
 

A:Solved: PNY GeForce 6200 graphics card installation problem

It looks like you are using an installer utility that comes with the graphics card that is causing a problem.

Let's try installing the driver a different way. Insert the install CD and exit the install utility if it autoruns. Open Device Manager (right click MyComputer, click Manage, click Device Manager). Right click the unknown graphics adapter and click Update Driver or install.

If the hardware update wizard asks to connect to the internet, choose No. Then choose install the software automatically. Windows should find the driver on the CD and install it.
 

2 more replies
Answer Match 68.04%

8600 gt need 400 watt power supply plus.

but i have my own problems if anyone can help
av just started running vista 64bit, ma graphics card works and that (8600 gt) but when i install the CD when is says that the diver has been disabled.

p.s had it working fine on this computer when a was using XP

anyone giz a hand

Intel 2.66Ghz core dual processor
1.5GB of RAM DDR2
500 watts power supply
 

A:Trouble Installing Geforce 8600GT

I've split you off from the other thread.

I wouldn't recommend you uninstall the current driver from Programs and Features in the Control Panel and then use the latest driver from the NVidia site: http://www.nvidia.com/object/winvista_x64_163.69.html
 

1 more replies
Answer Match 68.04%

So it's christmas day, and I get a new 8600GT. Luckily, it was really easy to install, but when I boot up the computer for the first time, I get a "Disc Read Error: Press ctrl+alt+del to restart" I restart it, and get the same message. I don't know much in BIOS, but what I did find, was selecting either PCI, and PEG, and that didn't help. I know my HDD isn't messed up, because I reinstalled my crappy X300, and everything works fine. Any advice?
 

A:Some trouble installing a GeForce 8600GT

Firstly uninstall the old VGA driver from either control panel > add remove programs or with device manager.
Then install new VGA card and install newest NVIDIA driver.
 

2 more replies
Answer Match 67.2%

Short version:
Any driver I try to install for this- the companies or unnoficial ones- gives me an error.

Very long version:
I order the retail version of said package fo $80 for my Dell Dimension 2400 (POS, I know) that runs WinXP home, and try to install it. It turns out I don't have the power supply for it, so I go buy a 300w PSU for $50. So now, it detects the card- add hardware wizard comes up at startup after I uninstall the integrated graphics driver- but when I select the driver to install for it, it says "no hardware information present" or something similiar (I would give exact error, but I would have to disable integrated video, reboot, go through add hardware wizard, reinstall old drivers, and reboot again). This happened with the driver included on the CD, the latest driver from the company, Omega drivers, and Starfall drivers. All the same thing. If I plug the moniter into the card anyway, it's idle (like what happens when the moniter is turned on and plugged into a shut down computer).

Please... I beg of you people... don't let this $130 I couldn't really afford to spend in the first place go to waste!
 

A:Trouble installing XFX geForce 5200 PCI drivers

reboot in vga mode and install the drivers from the setup disk
 

3 more replies
Answer Match 65.94%

Regret if this sounds like an entry-level problem: I've been trying to install a PNY GeForce 5200 graphics card (PCI format) for my son's video game use on my XP system and keep getting a black screen after the Microsoft start-up visuals appear once I reboot. I've double-checked that the card is installed securely in the PCI slot, and connected the monitor to correctly to the VGA plug on the new card, per the instructions, but after rebooting, it always returns to a black screen after the Microsoft graphics intro.

Last night I reattached the monitor to the normal VGA connection and checked out the internet for any info on troubleshooting this installation process, and saw a few remarks from users who had bought the GeForce 5200 on Amazon that the instructions were incomplete and that the existing graphics card has to be disabled or uninstalled before the new card can be properly installed (stands to reason, but the PNY instructions don't provide any directions for the beginner).

If anyone has any experience in installing this type of card sucessfully on their XP system and can offer any simple steps to disable/uninstall the current graphics card, it would be greatly appreciated. Many thanks, IMsci
 

A:Trouble installing PNY Nvidia GeForce 5200 Graphics Card

15 more replies
Answer Match 65.52%

Hi there.

My specs are:

2.5 ghz intel
geforce 6200
1 gig ram
350 wtt pwr supply
Atl Audio
80 gig hddr

Hi there i play cs 1.6 and i recieve between 40-60 when there are more then 10 ppl in a server. When i hit smoke or combat my fps decreases. I have done all the basics. vsync off, developer 1, cmdrate 100, updaterate 100 , rate 2000, Anitilzing off, updated drivers/spyware cleaner. My computer should run more then 60 fps, can someone please help? If i have a ****ty audio card could that decrease fps? I have also updated my chipset drivers. Could any bio information be wrong? PLEASE HELP

I have ran out of ideas on how to increase my fps
 

A:Geforce 6200 OC 256

Hello! Welcome to TechSpot

May not be your system, just the latency of the web/game server.
Isp and other things could be causing it too.
Unless the game is real intensive audio or you're have driver issue with
it then the sound card should'nt be cause low fps.
What OS and what ver of video driver?
G'Luck
 

17 more replies
Answer Match 65.52%

I shuold be able to max out Halo, and NFSU2 right??? Because my frame rates are sloppy and i can't put anything on high..

A:GeForce 6200...

6200 can deliver only abt 15 frames/sec in halo using in1600x1200mode.

13 more replies
Answer Match 65.52%

Im considering of buying this because its on sale for $88.99, i know its mostly 149.99 on some stores. Im just wondering if its any good? Will i be able to play BF2 on a good quality settings with this? Currently I have a GeForce FX5200 (which is OK but dated), I'll be waiting for some comments before i buy this item.
 

A:PNY GeForce 6200

A 6200 would be better than a 5200, but for the same price, you can get a 6600, if you don't mind buying online.
http://www.newegg.com/Product/Product.asp?Item=N82E16814121197
 

6 more replies
Answer Match 65.52%

Hi, i have a Geforce 6200 AGP 8x 256mb on an Abit is7-v2 (i know i need a new one), and it keeps freezin for a few seconds and then comes back, I was just wonderin if anyone knew how to fix it. Thnx
 

A:Geforce 6200 AGP

Plz Help
 

1 more replies
Answer Match 65.52%

I recently installed a new graphics card and all seemed fine but when I try to watch streaming video, it uses up 100% of my cpu. ??
 

A:GeForce 6200

How much RAM do you have?

Is this streaming video?

What program are you using to watch the video?
 

2 more replies
Answer Match 65.52%

Hey all!

I'm new to the forum and lookin for a bit of help. Here's the deal: I'm running Windows 7 on a notebook with a GeForce Go 6200. No aero, and under the Device Manager, the video card shows up as "Standard VGA Graphics Adapter". I tried going through the Nvidia drivers online but they apparently don't offer drivers for the Geforce Go 6 series.

I took a look at the thread about issues people were having with the regular GeForce 6200 card here and tried some of the things people suggested but i'm no better off.

Who's got a solution? Thanks for any help.

A:Win 7 & GeForce Go 6200

Hi Alejandro,
Have you tried to make Windows to find a proper driver online?
I'm using the Geforce Go 7300 on my laptop and after the installation I had the same problem you have. I just went to the device manager (right click on "computer", then properties and "devise manager" on the left column, open the "display adapters", right click on "Standard VGA Graphics Adapter" and "update driver software", then "search automatically for updated driver software" and it should search, find and install the driver (if available)

It worked for me, I hope it works for you.

9 more replies
Answer Match 65.52%

Hello all. Is there anyway of telling which geforce 6200 can be unlocked to a 6600? Ive noticed some have heatsink fans and other have just a heatsink.

The one i am thinking of buying is the pny verto 6200

http://www.pny.com/products/verto/performance/6200agp.asp

What do you think?

Regards Sean.
 

A:Geforce 6200. How to tell?

I got the leadtek a6200td, and unlocked it, but I can't find it for sale anymore. I think I heard that that chaintech 6200 might be able to, but It's anyone's guess, I got lucky. You want to get a nv43 core, and an early revision (a1, a2, a3), as this is the same core as the 6600 and 6600gt, but some newer 6200's have the nv44 core which can't unlock, it's made with only 4 pipes, and no more.
 

4 more replies
Answer Match 65.52%

Well? Will C&C run ok on my system?
 

More replies
Answer Match 65.52%

Hi,

My PC spec is:

Windows Vista Business
Pentium 4, 3ghz
1.25ghz RAM
80gb HDD
geforce 6200 PCI gfx card

I was wondering why my windows experience score for graphics are:

2.4 graphics
2.6 gaming graphics

I thought they should be better than that, is there a driver i can download to optimize my score?

If not, can anyone recommend a PCI card that will get the score higher than 4?

Or can anyone recommend a motherboard and gfz card compatible with my pentium 4 processor.

thanks very much

A:geforce 6200

Originally Posted by munday63


Hi,

My PC spec is:

Windows Vista Business
Pentium 4, 3ghz
1.25ghz RAM
80gb HDD
geforce 6200 PCI gfx card

I was wondering why my windows experience score for graphics are:

2.4 graphics
2.6 gaming graphics

I thought they should be better than that, is there a driver i can download to optimize my score?

If not, can anyone recommend a PCI card that will get the score higher than 4?

Or can anyone recommend a motherboard and gfz card compatible with my pentium 4 processor.

thanks very much



That score is about right for a 4 pipe PCI card, not as low as I would expect. I believe that (but someone may know better than I) no video card that isn't at least AGP or PCI-Express will not crack a 3 on the WEI.

1 more replies
Answer Match 64.68%

My Geforce 6200 pci will freeze when I try to play a game and the onboard graphics never did that. I know a lot of other people are having the same problem so please help. I know its not temperature because I took off the cover and had a fan blowing on it and it still freezes. I dont think its the psu because other people with 400w+ psu's (250w minimum) still have the same problem. Please help.
 

A:Geforce 6200 pci freezing

You should first download the latest drivers and install them.
 

7 more replies
Answer Match 64.68%

I've bought a new Geforce 6200 AGP 4X with 256MB of memory
I'm running XP with SP2 on an AMD 1.4gh with 512MB of Ram

I am unable to run a number of applications some like the 3D Home design crash once i try to render the house in 3D. Others like Max Payne or Return to Caste Wolfenstien crash or fail on startup.

I have downloaded the latest drivers for my graphics card and i'm running DirectX 9

DirectX Diagnosis tool reports no errors.

Most error messages like the one below are less than helpful.
0xC000001D: Illegal Instruction

Any suggestions on where to look for a fix would be appreciated.

SIMS to and older games like Riven work fine on this graphics card.
 

More replies
Answer Match 64.68%

Been wondering I have 250 bucks to spend on a vid card. Still can't decide whehter to pick up a 6200 or a 6600. Was gonna go with a lower end 6800 but figured that wouldn't be a good idea seeing that the 6800 GT crushes both the 6800 and 6800 ultra. And on top of that pick up either the 128MB or 256MB??????
 

A:Geforce 6200 or 6600?

14 more replies
Answer Match 64.68%

Greets guys n gals, not much of a forum person myself so please be kind to me. thanks.

question i have is concerning my pci geforce 6200 128 ddr, what psu is preferable for this card and my machine?

CPU: Intel® Pentium® 4 Processor 515
(2.93GHz, , )
Operating System: Genuine Microsoft® Windows® XP Home Edition
Memory: 512MB DDR
Hard Drive: 250GB HDD1
Optical Drive: DL 16x DVD±RW
Media Reader: 8-in-1 (USB 2.0, Secure Digital? (SD), Smart Media, Compact Flash, Memory Stick®, Memory Stick PRO, Micro Drive, Multimedia Card?)
Video: Intel® 915G Graphics Media Accelarator 9001
Sound: AC' 97 Codec 6-channel Audio
Network: 10/100Mbps built-in Ethernet
Modem: 56K V.92 SmartLink SL1900
Peripherals: 105+18+key+ PS/2, 2-Button Wheel Mouse, Amplified Stereo Speakers
Ports/Other: 7 USB 2.0 ports (2 in front, 4 in back; 1 in Media Reader), 1 Serial, 1 Parallel, 2 PS/2, Audio-In & Out
Dimensions: 7.25"W x 14.125"H x 16"D


thanks for your kindness.. catch you soon.. p.s. let me know if you need any specific details..
 

A:Pci Geforce 6200 128mb/ Psu!?

Hello and Welcome to Techspot!

If in the near future, you want to upgrade your machine, THIS PSU will handle anything you throw at it.

If it's a little pricey to you, then THIS one is an excellent choice.

Regards
 

9 more replies
Answer Match 64.68%

hello I hope I am in the right place I just bought a GeForce 6200 graphics card I installed it meaning I put it in my computer when I booted my computer up it saw the card but it only went as far as the chipset allowed. I could see the computer was loading and am sure it went to desktop but the screen remained black after chipset stuff did their thing how do I gt card to work please so can install drivers lol I thought I followed the manuel directions to the T well hope you can help thanks oh and I have a on board video card the thought crossed my mind I may need disable it first what are your thoughts on that too please
 

A:Nividia geforce 6200

Try leaving the card in and start in safemode by immediately tapping F8 on startup and choose safemode.......while in safemode install the drivers and restart the PC.
 

1 more replies
Answer Match 64.68%

Geforce 6200 keeps causing bluescreens. Ive tried several different drivers and cant get a good result.

A:Cant get a driver for geforce 6200

here is the message i get once i reboot if it helps
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8005D604E0
BCP2: FFFFFA600220F5F0
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

18 more replies
Answer Match 64.68%

Bfg GeForce 6200 Oc 256mb Pci card w/fan


I'll be playin guildwars lets say and I alt+tab(or hit windows key) and ill do this back and forth to look things up sometimes The computer will freeze momentarily then it will give me a blue screen with some crazy error number on it. and something about dumping all the memory also i cant read all of it because it is cut off on the right.

Ive contacted Bfg when I first bought the card and told me to update all my drivers and I had them all updated to the best of my knowledge.

Recently Ive Reformatted my computer also ive used the Nvidia Driver tool which tells you the right one. Ive also used about 4 other drivers all of which yield the same result with a Fatal Error.

On a side note it was a upgrade from a Ge force 5500Fx 128mb which i had no problems with at all.Only real noticeable upgrade was my brother could use 3d stuff on solid words better.

Ive also recently Installed a Pci Soundcard. Ive heard this can seriously degrade performance. Well Thx in advance.

Ive got the error with file Nv4_disp and it says its gotten stuck on a infinite loop.
 

A:BFG Geforce 6200 OC (PCI) Problem

So anyone ever have this problem i did put new info.
 

2 more replies
Answer Match 64.68%

hey guys have one problem...
will nvida geforce 6200 LE pci-e work in 4x agp
jus ma friend has asked about it...as i don know much..
so please help soon
 

A:geforce 6200 query

No. AGP for AGP only and same for PCI-e as well. It would be helpful if it did work that way!
 

1 more replies
Answer Match 64.68%

Hello there, just got done installing the Win7 Beta and updating all of my drivers.

There's one that's still giving me troubles though; my graphics card. I've got an XFX GeForce 6200 512MB AGP 8x. This is the second time I've had an issue with this card. I powered off my system, plugged the card in, and rebooted. I didn't touch anything in the BIOS, as my old Radeon 9250 worked fine before.
I log on to Windows, and I get the 'Installing Device Driver' or whatever popup. It runs, installs, says everything is fine, but I need to restart for it to take effect, so I do. I get back into Windows, expecting some Aero windows to greet me, but no. In Device Manager, I have the little yellow /!\. It says "Windows has stopped this device because it has reported problems. (Code 43)"

This also happened in Windows Vista Ultimate SP1.

The rest of my system:
Intel P4 3.2GHz with HT
Asus P4P800-VM Motherboard
1.5GB Corsair ValueSelect RAM
250GB WD SATA HDD

Please help! I'm willing to do anything to this machine, like I said, it's a brand new install so I've got nothing important on it.

A:GeForce 6200 Code 43

Hi, Ezcal, and welcome to the forums.

You are probably getting a conflict from the old ATI drivers. Use Phyxion.net - Downloads - 1.5.5 - Driver Sweeper to remove the old ATI drivers.

See Phyxion.net - Driver Sweeper for instructions on how to use - I *highly* recommend using the app in Safe Mode.

9 more replies
Answer Match 64.68%

Well i've had this video card for about 10 months, recently my Steam launcher has been telling me my drivers are out of date. I have also been working on my computer to try to fix a few quirks, in the process i had the brilliant i dea to go on a hunt for new drivers. The Nvidia site told me to go to Add/Remove hardware and remove the old drivers, so i did, when i try to reinstall the new drivers nothing happens...i click on the .exe i downloaded straight from the site but it does NOTHING. I would really appreciate it if someone could lend a hand.

Right now I'm running off my onboard card and its a huge pain, is there anything i can do?
 

A:NVidia Geforce 6200

8 more replies
Answer Match 64.68%

just recently bought a new card from the company bfg tech... its a geforce 6200 oc pci card.. anyways went through the proicess of getting rod of the old drivers and installing the new ones and once all was said and done i would have problems with my screen. whenever i would open any menus or touch the start menu every dropdown would cause the screen to go black for a second start back up and then do it again every time i select a different menu. sometimes after cluttering my screen up with so many menus the computer would freeze up completely. i had to reformat to be able to use the computer again because i would be unable to see what i needed to click on to uninstall the drivers and reinstall the old ones. any help to get this card working would be greatly apprecated thanks.
 

More replies
Answer Match 64.68%

I just bought this card,after installing it it would run perfectly for about an hour,then the computer freezes,and in gameplay I get the weirdest lagg.I already uninstalled the old one which was a Geforce 5200.this card is suppose to help fix my freeze and lagg problems but it worsens it,any suggestions?Specs are-AMD 64 3400 processor,RAM 512mb,200gb harddrive 7200 rpm,Nvidia Geforce 6200 turbo cache
 

A:Nvidia Geforce 6200

Check for overheating.

Also check that your psu is putting out enough power for your system.

If it`s a cheap generic psu. It won`t be capable of putting out anywhere near it`s rated output. Even a good quality psu will only achieve around 70% efficiency.

Look at this psu wattage calculator HERE

Regards Howard
 

3 more replies
Answer Match 64.68%

Recently bought a new computer. Its a gateway, AMD Athlon 4600 Duo, 2 gigs of ram, 300 watt power supply, running with windows vista premium. It had a geforce 6150 integrated video card. I replaced it with the card in the title. Now any kind of application that requires video memory simply doesnt work. Even the chess game that comes with the computer, ill make a move, then it locks up, screen goes black, then it unfreezes, and i get an error message saying Display driver (forget what it says here) stopped responding and has successfully recovered. I have the newest drivers that a BFG tech support told me to get, I removed the integrated card in the device manager. Cant seem to fix this issue, starting to think the video card might just be defective. Anyone have a clue what I can try next?
 

A:Problem with Geforce 6200 256 RAM OC

91.47_forceware_winxp2k_english_whql, get these drivers and try them.
 

3 more replies
Answer Match 64.68%

I have 3 24 inch monitors, two on a ATI Ra. HD 3450 that work fine but the last one on a NVIDIA GeForce 6200 will not pick up drivers (tried 306.23, 306.02 and 304.79).

Need help.

Thanks.

More replies
Answer Match 64.68%

I installed my NVIDIA GeForce (PCI 256RAM) Video Card today, My PC metst all the system requirements but when i try to run halo 2 or refresh my performance score they run for about 1 minute then my monitor shuts off and the pc restarts after another few minutes.

I thought it was the power supply but its a 250watt which it the minimum requirement to run the card...

Ive got my hard drive, a CD Burner, DVD Drive, Floppy Drive, PCI Sound Card, Internal Sound Card, and the GeForce 6200 Video Card all running. (also internal video card but its disabled)

Am i running to many things for it to manage the power to all of them or what?
 

A:GeForce 6200 Problem

11 more replies
Answer Match 64.68%

Hi guys..
Got this card recently.. I have a Intel P4 3.0 GHz and 1 GB of Ram.. I recently also updated my SMPS to 440W..
The problem is when the card is "ON".. Windows XP freezes halfway when its loading.. I read many forums but not many ppl have the same issues.. Most of em suggested to reload `ol drivers.. I've tried the latest one 178.24, 175.19 and 81.95.. Still the same problem occurs.. The best part is the comp only works in Safe Mode with good graphics.. Thats really sad..
Waiting for some "Good" help plz.. Im pissed with this problem.. Btw ive not done any settings in my BIOS.. so if thats to be done then plz do let me know..
Thanks & Cheers..
 

A:Nvidia geforce 6200

Well, if the card works fine in safe mode and not during a normal session than I would say it's most definitely a driver issue. Here's what I would try...

Boot into safe mode with card installed... make sure it's seated properly
Run Driver Cleaner Pro (download from Guru3D) to remove old drivers
**You may want to consider reinstalling/updating chipset drivers too**
Go into Add/Remove Programs and uninstall the driver entries from there (clean up)
Restart the computer; boot into Safe Mode again
Reinstall the latest drivers for the video card **after chipset drivers if you chose to update!!**
Restart the computer again; see if it boots normally

If the video card still doesn't work, you might have to update directX or download some Windows updates. I'd say if nothing works after that point, ask for an RMA... might be faulty vRAM or something.
 

2 more replies
Answer Match 64.68%

Ok so if you own a Nvidia GeForce 6200 and your in 7, you probably know that there are many problems. But why? I thought Windows 7 was suppose to be the Sucesser to Vista. Everyone complains about how vista sucks but when i installed the very first time The drivers were installed correctly, and i had Aero in Windows Vista Ultimate. So if Windows 7 is suppose to be the "fix" of vista Why doesn't This driver work in 7 but works great in vista?

A:7 Just doesn't Like GeForce 6200?

running my 9800gtx+ I have no problems now I am using the right driver, maybe experimenting with drivers might solve your problems

3 more replies
Answer Match 64.68%

hi. when i try to watch videos on my computer using the nvidia geforce 6200, the computer slows down considerably. i also have another graphics driver in my computer...the Intel 82845G/GL Graphics Controller. i disable the geforce and restarted my computer and was able to watch videos but when i enabled the geforce and disabled the intel, i was unable to watch videos. what should i do? thanks.
 

A:nvidia geforce 6200

7 more replies
Answer Match 64.68%

Hi there.

I am having serious problems with my Geforce 6200 and I wondered if anyone knew the best thing I could do to get it to work. I am on a dell dimension 2400 and using an inbuilt intel extremegraphics card. On installing my new graphics card, the windows loading screen comes up, and then the screen goes blank. The card only seems to work without its drivers, and even then it is using an incredily low resolution and looks bizarre on the screen. How can I make it work? not even the most recent drivers have rectified this problem. It would be preferable if i didn't have to reformat. Thanks for any help you might have for me
 

A:PNY Geforce 6200 difficulties

have u disabled the extremegraphics? to get any graphics card to work this is going to be the first thing u have to do. I do not think u will get the drivers to install until the on board video is uninstalled.
 

5 more replies
Answer Match 64.68%

ok
so i have a pretty outdated system
and i am thinking about upgrading it over the holidays.
i am adding 2 gb ram and am looking for a pci (not express)card tht can run aero for around 50$. i am upgradeing from my wimpy little ati raedon 9250.


would this card be capable of running aero?

http://www.newegg.com/Product/Product.aspx?Item=N82E16814133234

With the research ive done on numerous websites i think this card should be able to get the job done.
but im just making sure that anyone doesn't know anthing different.
also if there are any other better deals out there let me know.


any feedback is appreciated

A:Nvidia Geforce 6200

Yes you will be able to use the aero feature and vista will run better with 2GB of ram instead of your 512MB of ram now.

4 more replies
Answer Match 64.68%

I am running an AMD Athlon xp 1.6ghz with an asus chipset and 512 mb ram
I just installed a XFX Nvidia Geforce 6200 256 mb in an agp 8X slot
But whenever i try to run a game like NFS Most wanted,the comp restarts everytime.
Please Help..
 

A:Problem with Geforce 6200 256 mb

You didnt mention installing drivers, I'm thinking that since you know what your chipset is, more than likely you know enough to install drivers. But just in case you didnt...
 

2 more replies
Answer Match 64.26%

Windows 7 has been randomly locking up on me and I think it's an issue with the GeForce 6200 AGP 8x that I installed. I've noticed quite a few problems using the 6200 but not a definitive solution. I'm running the latest drivers from NVidia, 195.62. Has anyone had luck smoothing the problems out? The locks occur at random times during random events, surfing the web, playing solitaire or Kuma, opening Outlook, etc., and I have to hit the reset button or drop the power to get the system up and running again. Windows doesn't show any errors in the Event Viewer for the lock ups, only afterwards saying the system didn't shutdown properly.

I've attached the system info if that helps.

Any help is appreciated.

Thanks!

A:Windows 7 locks up with GeForce 6200

Welcome to seven forums genoDillon. Unfortunately this is one of those situations that the age of your system hasn't kept up with the operating systems. The only thing you can do is go to the Abit site and make sure you have the latest bios.05/07/06 for XP and chipset drivers 05/26/05 XP. And install them in compatibility mode Compatibility Mode And hope that the 195.62 driver will work. Try the solution in this thread post #2 GeForce 6200 512MB AGP 8X running Windows Aero. You can also scroll down on this thread and review the 5 other threads for a solution. Good luck with it Fabe

3 more replies
Answer Match 64.26%

I am tired of my graphic card, as it is underpowered. I am trying to decide what to get in place of it and I'm looking at the Radeon 9800se 128-bit 128mb video card. My GeForce is 64-bit 128mb video card. Should I stay with my vid card or get the Radeon. My budget is between $60-70. Any other suggestions would be greatly appreciated.
 

A:GeForce 6200 vs. ATI Radeon 9800

This would be a good card, better than your 6200 and better than a 9800SE:

http://www.newegg.com/Product/Product.asp?Item=N82E16814102510
 

9 more replies
Answer Match 64.26%

I'm looking at upgrading to an agp 8X geforce 6200 card, will this give me any performance increase, or should i just stay gaming with my geforce 2 mx 400 (pci)?

And, yes I am aware that it's an old sucky card blah blah blah, but just answer my question.
I Don't game much so $30 is about what i want to spend for the amount of gaming i do. THe rest of my system (consisting of a 3ghz overclocked celeron and 512mb ddr ram) will be bottlenecked by really good video cards too and i don't wan't to go all out, because i game little if any on the weekends.
 

A:geforce 6200 graphics card

6 more replies
Answer Match 64.26%

friends,i want to hear about gaming performance of geforce 6200 (256mb)card from those using that card,before buying it.please help.
 

A:to anyone using geforce 6200 video card

I bought a pny 6200 hoping to get one that could be unlocked into a 6600. To my disapointment i got the 64 bit version and i wasnt impressed by the performance in the latest games, high resolutions are simply not possible. It wasnt long after i ditched it and got a 9700 which im more than happy with for now.

Obviously if you do buy one and get 128bit version then it will be a different story.

Thanks
Sean.
 

1 more replies
Answer Match 64.26%

This is my first post, so I hope I don't inadvertently break any rules. I've search the forums, but don't quite find this weird problem. I have WinXP Professional SP2 Celeron 2.8 GHz, 1 ¼ Gb RAM , and a newly installed ( by me ) Sparkle GeForce 6200 128 Mb PCI graphic card.
For Xmas I got a new 300 GB HD, and a new LCD monitor, plus the graphics card. I installed it and the monitor on my old 40 Gb hard drive, and it worked like a charm with the latest driver from nVidia, I got the display on start-up, all was fine, except most games run too slow, stuttering, or sound warbles. I then had a friend ( a techie ) partition and new install WinXP on the new HD, added all new drivers, but can't get the new monitor to recognize the graphic card! On the old HD, which I'm still using, in the device manager it shows both the on-board graphic chipset ( disabled ) and the new card as options for a plug-and-play monitor, but on the new HD it shows the 6200 only for a Standard Monitor, and I can't change the color setting or anything, it stays at the lowest settings there are. I was hoping a new install would speed things up, but NOOOoooo. Why would everything work fine on my old drive, and not the new one? I tried re.installing SP2, same thing. Re-format and try the new install again? My techie friend is also no help, so I turn to you
for some kindly assistance. Oh, power supply is 210 watts, also. Thanks, Marqoz
 

A:GeForce 6200 works on 1 out of 2 HardDrives

16 more replies
Answer Match 64.26%

i recently purchased the GeForce 6200 LE 256MB to retire my old GeForce4 MX4000 64MB video card.

and also i also been reading about the LE series of the GeForce line, calling it the "Lame Edition".

Although i have seen a increase in my 3D games, so it shouldn't be as bad as most proclaim it to be.

so, i just need a bit of insider on this...

is it really worth having??
 

A:NVidia GeForce 6200 LE (is it good to have?)

Shadow: Here is my two cents. If YOU are happy with it, what difference does it make if the reviewers say it's a Lame Edition?
The same holds true with all your hardware,
unless you want to spend all your time and money being on the cutting edge, which is always just one step ahead of you, and so is impossible.
 

1 more replies
Answer Match 64.26%

ive been messing with it for like 4 hours installing and uninstalling everything to try to get this card to work... i got it out of the box and installed it and installed the drivers... it didnt work so i read up and saw that i should disable the built in video driver... so i disabled it and reinstalled everything... it still didnt work... i would get a screen to come up with my monitor plugged in to the new card but it was just my desktop background with no icons or bottom start menu bar... i could right click but nothing would open except the nvidia program... it was also still in the simple 8 color mode even running threw the card... i thought it might be the monitor drivers becasue this is not the original monitor that the computer came with .... so i got the right drivers for that and that didnt solve my problem...it is a e-geforce 6200 pci card by the way just incase i didnt mention the type of card... man i would really appreciate some help on this im lost...does my card need a power source? it looks like there is an input on the card but i couldnt spot a spare power source cord in the computer... it looks like a two prong in put...(pretty small) anyways thanks for all the help!....my system info is
Property Value
Manufacturer Intel Corporation
Model D845GVSR
Version AAC45439-302
Serial Number FCSR42705169

Chipset Vendor Intel Corporation
Chipset Model 845G/GL/GV Brookdale Host-Hub Interface Bridge (A1-step)
South Bridge 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridg... Read more

More replies
Answer Match 64.26%

Okay, i changed my old video card into this NVIDIA GeForce 6200. Now i am unable to watch any movies using Window Media player or any other programs that allows me to watch movies with. It happens that when i load a movie, it will just freeze. When I crl+alt+del, things would change back into normal. On the other hand, when i want to play a specific game such as Rise of Nations, it will have the same problem as the movie, freeze in the beginning of the intro. However, when i play counter-strike: Condition Zero, it works perfectly. My computer is showing that the video card is not recogniznig it or the yellow exclamation mark beside the "NVIDIA nForce Networking Controller". When i want to load this hardware in my add hardware wizard, this shows up: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
Man i don't know what kind of stupid problem this is , but i would like to have it fix and get this video card working so i can watch some movies wth it. PLEASE help out here, THANKS.
 

A:Problems with NVIDIA GeForce 6200

16 more replies
Answer Match 64.26%

I just got this GeForce 6200 PCI card when I installed it into the computer it seemed to be working fine, however after I loaded the drivers I get black almost pixle like dots on the screen like it cant draw everything, almost like it does not have enough power. The card calls for a 250W power suply I have a 400w so Im sure Im good on power. When I uninstall the drivers the dots go away, when I reinstall they comeback So im kinda sure its the drivers I was just seeing if anyone knew of a better set of drivers for this card or if I should just get a new card. The dots do not appear when Im playing games. Thank you in advance!

Oh by the way im running Windows XP
 

A:GeForce 6200 OC BFG Tech Problum

Got a new graphics card instead, I got the BFG Tech 8500 GT works great with no problums!
 

1 more replies
Answer Match 64.26%

CPU:
Intel Pentium 4 3.2ghz
1GB kingston ram 3200
Geforce 6200 128mb AGP 8X
Windows XP Pro SP2

My CPU should run fear at least on low, right? I've turned resolution down to 640x480, turned everything to minimum, turned anything that had to do with shadows off, and it glitches very, very bad. When I start up the game, the intro is even glitchy. When I'm in the menu, when I mouse over an option, like new game, it takes a good second for it to actually execute. I've never had this problem with any game before. This comp runs HL2 with everything on high with AA and AF, with an easy 100fps. Any help would be GREATLY appreciated.
 

A:Geforce 6200 and F.E.A.R(HUGE problem)

16 more replies
Answer Match 64.26%

I just built my own computer afte going crazy for a few years with the Dell Optiplex Gx110, and now have decided to upgrade my S3 UniChrome integrated graphics with something better for playing modern games. I am looking at a 128mb. 64-Bit EVGA e-GeForce 6200 agp 8x, and a 256mb ATI Radeon 9600xt (or tx?) agp 8x. Each have their own advantages and disadvantages, but I am wondering which is better. I play mainly games like The Sims 2 kind of games as well as Action RPG's (like Oblivion, but less demanding). Which is better suited for me? Here are my computer specs. straight from the DirectX Diagnostic Tool:

Intel(R) Celeron(R) :dead: CPU 2.66 Ghz
224 MB. Ram (next on my list to upgrade)
DirectX 8.1 4.08.01.0810 (will be upgraded to 9.0 by the time anyone reads this)
Windows XP Home Edition (5.1, Build 2600)
 

A:e-GeForce 6200 vs. ATI Radeon 9600xt

Out of those two, the 9600XT is WAY better. But, if you like to play modern games, I`m afraid you`ll need better CPU and GPU. The 9600XT isn`t very good for Oblivion.

You need at least a Geforce 6600 GT for that game, and of course a good CPU (Athlon 64, P4) to run Oblivion. Very demanding game.....

Also, Welcome to Techspot!! :wave:
 

8 more replies
Answer Match 64.26%

Hello, i just bought an Nvidia Geforce 6200 256mb, because my Nvidia Geforce 2 Mx400 64mb overclocked and gave up.

I installed the card, i installed the drivers (91.47), and i have 9.0c

But for some reason, sometimes, for no reason, my monitor gets no signal, and i have to reboot my computer, also playing games is impossible..
Does anybody know what problem i have, and how to fix it
 

A:Problem Nvidia Geforce 6200

Use drivercleaner. Firstly uninstall your drivers, reboot. Then go to google type in DriverCleaner. Download the Pro version. Install, and for at the top of drop down box select the following. NVIDIA. Press start. After it is done, go back to the drop down box and select NVIDIA WDM, and press start.
 

3 more replies
Answer Match 64.26%

I have problems with my Video Card, I know that the problem is not Hardware, Cause the card works Fine with XP. |||Video Card: nVidia GeForce 6200 (PCI)(BFG) Motherboard: Azus P4S333|||
A High Graphics game i have suggests its a Directx 10 error, i was wondering if you could help me to get rid of DX10 and help me get DX9.0 on my system. I am currently running Vista Home Basic, but i am upgrading to Buisness in literatly 2 hours from now. my dad just left to buy it! If i do figure out that the Problem with this Card is not a Driver Issue but instead a DirectX issue, it will help alot of ppl. Do a Serch on the net. Bunch of ppl have the same problem!

A:nVidia Geforce 6200 Issue

Originally Posted by TimmyTim2


I have problems with my Video Card, I know that the problem is not Hardware, Cause the card works Fine with XP. |||Video Card: nVidia GeForce 6200 (PCI)(BFG) Motherboard: Azus P4S333|||
A High Graphics game i have suggests its a Directx 10 error, i was wondering if you could help me to get rid of DX10 and help me get DX9.0 on my system. I am currently running Vista Home Basic, but i am upgrading to Buisness in literatly 2 hours from now. my dad just left to buy it! If i do figure out that the Problem with this Card is not a Driver Issue but instead a DirectX issue, it will help alot of ppl. Do a Serch on the net. Bunch of ppl have the same problem!



You can't get rid of DX10, but you can install DX9 from here
Download details: DirectX End-User Runtime

Your card is an entry level card for DX10, so it will work with DX10, but probably won't play too many of the newer games, if any. It is basically to give you access to the Vista Aero component.

Try downloading and installing the latest Nvidea driver for your card here

Drivers - Download NVIDIA Drivers

Norm

8 more replies
Answer Match 64.26%

I have just been reading on the internet that it is possible for a user of a geforce 6200 to unlock and extra 4 pixel pipelines, so 8 pixel pipelines instead of 4. Now this is something i would love to do, but don't know how. Can anyone help me

I'm using an Asus Extreme N6200TC which supports and is currently on 256MB. I have already overclocked it from "Core: 350MHz to 454MHz, and Memory 1.10GHz to 1.42GHz". An extra 4 pixel pipelines will help me survive the games i play today until i can afford a 8600GTS/ or GT, or a mid range R600. But on my budget it may take some time.
 

More replies
Answer Match 64.26%

Hello everyone
Now i am telling you a problem lasted with more than a year and i tried many solution but i didnt manage to solve it
I bought year ago AGP Geforce 6200 but it caused all games to hang
Each time i open a game that using a little high graphics the PC hangs
The strange thing it worked on other Pc smoothly so i supposed that this card conflicts with motherboard
I was having gigabyte motherbaord and i replaced it by Biostar motherbaord to test the change on this card -but the problem remained
What the reason of that problem and how can get that card working
 

A:Geforce 6200 game freezing

You need to specify model and version of the motherboards.
 

6 more replies
Answer Match 64.26%

Hi all. I recently read about video card volt modding on the internet and would like to try this out on my card. It is a GeForce 6200 (as you have probably already worked out). I would like to overclock my core higher then 450mhz. Does anyone know of some safe volt mods for this card?

Thanks.
 

A:Need help volt modding GeForce 6200

RivaTuner v2.06 is the easiest way to overclock that video card, it is a free software, u can Google it and find it. now keep in u're mind that it is going to run hotter. and if u overclock too much it might not run.
 

3 more replies
Answer Match 64.26%

Hello, i just joined this forum in hopes of finding an answer to my problem, i have also searched the posts relating to my problem. A few days ago my pc was dropped of a stand with the monitor and everything connected. The onboard gfx does not work anymore (nVIDIA 6100 Geforce 405) and the plug is loose so i installed a nVIDIA 6200 Geforce PCI card, everything is fine till i go to run a high graphics game like WoW or SecondLife. They work for a few seconds then the screen gets all messed up then goes off and back on, then a Hazard Sign in the System Tray pops up that says "Display Driver has stopped responding and has Recovered". Now i know enough to solve certain issues but this has me stumped, i've updated my drivers, even lowered the resolution to try to get the game to work but it does the same thing, now ive had this card in before a few months back, worked fine, then i took it out and went back to the onboard gfx. now the PCI card is giving me issues. If anyone can help it would be greatly appreciated

Fiera

A:nVIDIA 6200 Geforce Issues

Hello Fiera,
There are a few things you can check, things like temp, Is your PSU big enough ?, is the on-board display adaptor disabled in the Bios ?, are all the other connections on the MB secure ?, were there any old video drivers on the system ?, i suspect that there may be more damage than you suspected.
Let us know how it goes, good luck.

7 more replies
Answer Match 64.26%

Hi all,

having problems with my GeForce 6200 graphics card. In device manager under display adapter it an exclamation mark appears, when i click on the properties option a message stating this device has not started and a code 10 error appears.

How can I fix this problem? I have tried uninstalling, installing, disabling, enabling, updating the driver.

thanks
 

A:GeForce 6200 code 10 error

Have you got your Mainboard ChipSet Drivers Installed

Try This
Download/Install
Open this app.and click on Clean the Registry

http://www.snapfiles.com/get/regseeker.html

The other thing to try is to simply uninstall the drivers, reboot and let Windows use the basic built-in graphics driver. If the error still occurs then it may be a BIOS setting or even cabling or the way the card is seated that's the issue.

Or

Select the Driver tab, click Update Driver, then select "Install from a list or specific location (Advanced)" and manually select the correct driver.

Make sure you have completely uninstalled the previous driver first..

Hope this helps
 

1 more replies
Answer Match 64.26%

Hi all, my first post on this forum

I have just installed Windows 7 on my PC who have a Geforce Turbocache 6200 (128 meg / PCI-E)

And aero don't seems to work. When i launch an evaluation test, i says "Could not measure video playback".

I have the latests drivers from Nvidia, (191.07).

Also, in dxdiag, neither Directdraw or AGP are enabled.

Any help are welcome

Thanks !

A:Geforce 6200 Turbocache - No aero

Right click desktop, choose personalize. Near the bottom should be a link to troubleshoot Aero. If not, choose an Aero theme if you can.

AGP texture acceleration should be disabled for you since you are running a PCI-e card.

Otherwise, does device manager show any errors for the card or does it say it is running well?

9 more replies
Answer Match 64.26%

when my old graphic card went kput installed geforce 6200 512mb ddr2 when i switced on to update drivers all i got was black screen no windows. so cant install new drivers and cant get into safe mode to uninstall old drivers. need help any ideas please (have got drivers on cd )

A:geforce 6200 graphic card

When the computer is starting up, before getting to Windows, press F8 a few times and then select "Last Known Good Configuration" to see if that helps or not. Another thing you can try is when pressing F8, using the Windows Recovery Environment to perform a System Restore.

3 more replies
Answer Match 64.26%

Hi... i have a problem... well yesterday I downloaded and installed windows 7 on my PC.. everything was fine until i realized that there was no aero so i went to my device admin and there was the yellow thing next to my graphic card.. i tried every driver i could, none of them worked.. can someone tell me what im doing wrong or how can i fix it plz? as the title says it's an Nvidia GeForce 6200 512 MB

A:Nvidia Geforce 6200 on Windows 7

Install the latest driver from NVidia's site. Use the device manager if you have to, to do so.

9 more replies
Answer Match 64.26%

hey,

all the games i try to play give me lagg :s
i got this video card just this week and i don't know what to do now..
even Overlord 2 laggs and i was able to play games like call of duty 4 with my previus card..and normaly this 1 is better..i tink
hope some 1 can help
thx!
 

A:Lag in game with NVIDIA GeForce 6200 LE

That cards got TurboCache so it takes some system ram.

Do you play Team fortress 2. Lags what do you mean by that.
 

2 more replies
Answer Match 64.26%

I have a Gateway FX6840. It has an ATI Radeon HD 5700. I had two monitors going just fine. I can run WoW with most of the graphics options turned all the way up and I still get 60 fps. I had a third monitor so I decided to put it to use. I went out and grabbed my NVIDIA GeForce 6200 and tossed it in my PCI slot. I plugged in my third monitor, and it works. The issue is that whenever I utilize my new video card, my frame rates get destroyed. With my third monitor going, my frame rate on WoW drops below 30 and has trouble staying above 15. If my third monitor is completely idle then my frame rate is fine. Only if I have a program running on that monitor are there any issues. Also, whenever I log into my computer with three monitors on it takes forever. When I first turned on the third monitor, all three screens went black and it took forever for them to come back. I already tried updating all of my video card drivers. I'm guessing it has something to do with the driver.

Any help would really be appreciated.

A:Issues with NVIDIA GeForce 6200

Lol, this is obvious. Your GeForce 6200 is just rubbish at gaming. That why this is happening. If you would like to have 3 monitors, and can't use your current video card to power all 3, your best bet is to just buy a new video card.

Slasher

8 more replies
Answer Match 64.26%

Alright, I have an older work system that I bought the above graphics card for. The system works perfectly before the card. When I install the card in the case the system boots. Once I install the driver, Windows locks at the Starting Windows screen (black with Windows Logo). Safemode boots so I can delete the driver. I can then get back into windows. Ive installed the driver from the disc etc and still nothing. I'm at a loss. I can't find any section of my BIOS to disable the onboard. When I disable the Onboard VGA and reboot, the AGP now doesn't work but the onboard still does. This could be the issue. I noticed there is not 2 VGA adapters listed when I have the AGP card in and the onboard working. Any help would be greatly appreciated. I may just go back to XP.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Enterprise , Service Pack 1, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.06GHz, x64 Family 15 Model 4 Stepping 9
Processor Count: 1
RAM: 991 Mb
Graphics Card: Standard VGA Graphics Adapter, 0 Mb
Hard Drives: C: Total - 32150 MB, Free - 9100 MB;
Motherboard: Lenovo, 8S661FXMTIU, x.x,
Antivirus: None
 

More replies
Answer Match 64.26%

hi everyone,

my friend got new pc computer Dell Dimenison 3000 had only 4 pci slots, no AGP, so just pay new NVIDIA GeFORCE 6200 PCI 128MB, so im setup for friend, but wont working, when i have disblad on driver adapter then turn off pc, put installed new graphic card, then turn on pc, its fine so i put CD drive to installed, then fine so restart pc, then backup but suddenly its blank at all!!, try again but same thing!

Any idea?

i wish his Pc should have AGP but....

im grateful if anyone help me.
 

More replies
Answer Match 64.26%

I am looking to upgrade my PC. Ideally, if I can re-use any of my current hardware I would like to so I can save a few quid.

I currently have a GeForce6200 running in my PC. This sits on an AOpen, MATX, MK77M-8XN, SktA, FSB400/DDR333/S-ATA/ATA133, S & G & LAN, ViaKM400 Motherboard, running an AMD Athlon 2500+ CPU.

I am looking to upgrade to an AMD Phenom X3 8450 running on an Asus M3A ATX AM2 770 SB600 8Gb DDR2 SATA 2 Raid GigaBit LAN Audio Motherboard.

Can anyone tell me if my GeForce 6200 graphics card would be compatible with this new set up?

Thanks
 

A:GeForce 6200 Graphics Card

You are probably using an AGP graphics card now and the new motherboard supports PCI-e graphics cards so if that's correct then no, it is not compatible with the new motherboard.
 

3 more replies
Answer Match 64.26%

Hi
Im am new to this so please be bear with me.
I have just installed a new GeForce 3d fusion 6200 graphics card to my Dell Optiplex GX 280 (to enable Call of Duty 2), originally graphics was an intel intergrated.
No problems with install, installed drivers and COD2 plays no problem.
Since install when I install a DVD (default player is Power DVD) it freezes. I installed NVDVD which came with the 6200, still freezes.
Video playback from the internet on media player also freezes.
Do I need to just tweek something. I have had a look at settings but nothing obvious jumps out at me.
Thanks in advance for any help you can give.

Mark.
 

A:GeForce 6200 video freeze

Hello and welcome to techspot!

Just need to clarify something first. You say when you go to play a movie, it freezes. What exactly do you mean when you say it freezes?

Your entire computer freezes up on you? Or is it just the software you are using to play the movie? As much detail as possible please, and we'll try and fix you up :grinthumb
 

15 more replies
Answer Match 64.26%

I just installed a 3d Fuzion Geforce 6200 and now whenever I try to play video using windows media player 10 it stops responding. I do ctrl+alt+del and it says I'm using 100% of my resources. I have to end program. I can use it for audio just fine, however.

I have searched microsoft help and 3D fuzion, but neither has any relevant troubleshooting topics

Can anyone help?
 

A:Media Player 10 & GeForce 6200

Could be a driver issue, try another. Maybe some help here:

http://forums.nvidia.com/index.php?act=idx
 

1 more replies
Answer Match 64.26%

I recently upgraded my video card from a crap nvidia to a geforce 6200 (not amazing, but cost effective ever since then, my computer has not been able to consistently resume from hibernation. This first started happening with an XP install, but I have recently updated to Vista Business Edition. I am pretty sure that it is not the operating system because I had the same symptoms with XP and Vista.

I have tried using 3rd party hibernation utilities, I have deleted and recreated the hibernate file, I have messed with the ACPI and various power settings in the BIOS, all to no avail. The system will boot past the loading screen, but when it gets to the login screen all I see is a black screen. The computer is still running, but I can't see anything. This happens until I reboot and delete the hibernation information.

The weird thing is is that if I hibernate it and resume it within 10 seconds, it comes back up fine - any longer and no beans. I have the latest nvidia Vista drivers and have updated about every other driver on the computer. My mobo is MSI K8mmv, 1 GB Corsair mem, 2 Seagate SATA HDDs, 2 IDE CD/DVD drives and a piece of crap network card I got from my grandma.

Sorry for the long post - any suggestions?
 

A:Problem with hibernation, geforce 6200

I realize that my vid card ain't very good - I didn't really want to sink a whole lot of money into my old socket 754 AMD mobo! Anyway, the hibernation would not work when vista/XP was first installed, so I would assume that uninstalling the current drivers would take it back to those. Is there some kind of a diagnostic I could run on it? What exactly do the ACPI settings do?
 

6 more replies
Answer Match 63.42%

Tonight i bought a new graphics card, a nvidia geforce 6200 PCI for my highly useless dell dimension 3000. The card was recommeneded by many as the best card for my situation, now that i have the card installed im stuck. The carrd went in fine, and after slight trouble at the start with the new plugging in of my cable to monitor, i thought i had it ready to install - software side. I started windows (which was low resolution) and put in my cd, followed the instructions to install the drivers. It told me i needed to uninstall my current driver for my intel extreme graphics 2 from add remove programmes, which i did easily. Went back into the installer and went throught the process again. It finished with no visible errors but when i restarted my pc after the windows xp logo all i get is a black screen??? its nothing to do with hardware i dont think as it shows my bios screen and the windows logo. In the manual for my graphics card it says i need too disable my onboard graphics. Would this be causing the problems and, if so how can i go about disabling the onboard graphics on my dimension 3000? i know you guys are great here so any help would be appreciated as i use that pc for important business.
 

A:Dimension 3000 - Geforce 6200 incompaitiblity?

Sounds as if you took out your monitor drivers.If you can boot into bios look for the setting to do with vga and try to enable it so your pci vid card will work. I am sorry as I do not have time to read this link but it will tell you all about your Dim 3000 and how to do things with it that should help you. http://support.dell.com/support/edocs/systems/dim3000/en/index.htm
 

2 more replies
Answer Match 63.42%

Did clean install ,tried to install lastest drivers ( 185.85 WHQL), During the install I get "Can't Init Direct 3d", then it stops. The system won't run any of the MS games such as Chess, ect.. When you try to run them I get a 3d error..
Any ideas would be greatly apprecited..

A:NVIDIA GeForce 6200 Turbo Cache

Hi. Show us your device manager with display adapters and system devices maximized please. You can type "device manager" and "snip" for those apps in the start menu search box. Hit enter after each.

There is a later driver from NVidia's site but that won't help you much if your problem is what I suspect. Good to download that for now anyway.

You can attach screenshots to your post using the paperclip.

Please fill out your system specs on here because that will be very helpful to diagnosing and repairing the problem.

5 more replies
Answer Match 63.42%

Hi!

Well, here's my problem, i have a Geforce 6200 TurboCache, with the drivers of vista, the aero works, but i can't see videos, in the itunes covers, it don't show nothing:

http://img18.imageshack.us/img18/5110/capturaar.png

I can't play halo, i only see a black screen, like in the videos

There's a solution?

Thanks

PD: Sorry for my bad english.

A:Geforce 6200 Turbo Cache Problems...

Any One?

2 more replies
Answer Match 63.42%

Everything seems to be plugged in dual card with adapter & second monitor works until windows opens, then it goes to sleep. Anyone knowhow to fix/

A:Can't get geforce 6200 dual monitors working

Is this in a game, or during normal Windows operation?

Most games can not use dual monitor.

1 more replies
Answer Match 63.42%

Yes Iv read the sticky and Iv read all sorts of peoples experiences and guides on this. The new drivers do not work ocing my card. This is my first time trying to oc. If I move the memory or core at all Ill crash in 3dmark01. Others have had this problem and the 76.44 nvidea driver has worked for them. I just tried it and it didn't work for me. Does anyone know a proper driver or better program than riva tuner I can use to oc my card? I only have pci slots btw. Yeah I know I can get a new mobo n card n all that. I know you can clock this card, I followed the steps, I must be having the same problem a lot of other people are having. Or heck if anyone knows how to unlock the other 4 pipelines that would be nice. But the only thing close to being able to unlock this card that Iv read is a theory on flashing the bios, which I have no idea how to do, but will do If told how and its not to hard or dangerous. Out of the 4-5 hours I spent reading forums only 2 sources said its possible. Neither told exactly how 1 was wikipedia and the other was a 2 yr old post.

Without oc my mark is 6955

Its nv44a{a1,4pp,3vp} with ddr 2 (which is supposedly unlockable)

http://accessories.us.dell.com/sna/...etail.aspx?c=us&l=en&s=dhs&cs=19&sku=A1270455

I have a
600 watt psu
Nvidea 6200 e-geforce pci card, link to card above.
2.53 pent 4
2gig ddr ram
dell dimension 2400
 

A:Ocing a e-geforce 6200 pci video card

I'm not sure if you can overclock with that dell.
 

12 more replies
Answer Match 63.42%

I just upgraded to Windows 7 Home Premium 64-bit and cannot get my graphics card drivers to load properly. I'm getting the same "Code 43" error everyone else I've read about seems to be getting. I've also tried every fix I've read about but to no avail.

Is there any final solution for this. The Windows 7 Compatibility website shows that my graphics card is fully compatible, but I cannot get the full power out of it. I think it's just running in standard VGA Mode.

System Specs:
Board - ASRock 4CoreDual-Sata2 R2.0
Chip - Intel Dual Core 2.50Ghz
Graphics Card - XFX Nvidia Geforce 6200 512Mb 64-Bit
RAM - 2Gb DDR2 PC2 5300

I've checked ASRocks website for drivers but there's none available. I've run multiple driver versions direct from Nvidia but none work. I've used the "stock" driver that Windows 7 uses if I "delete" the card from the system and re-enable it and that doesn't work either.

This setup worked perfectly on WinXP 32-Bit when I had it. But since I upgraded to Win7 64-Bit I can't get the graphics card to work for the life of me. Can someone please point me in the right direction to correct this?

A:XFX Geforce 6200 - no drivers working on Win7-64

Seeing as the motherboard bard both, is the video card AGP or PCI-E?

7 more replies
Answer Match 63.42%

I have a NVIDIA GeForce 6200 Video card that I recently did a driver upgrade on. The driver version is 6.14.11.6375 Dated 10-14-07.

I just did a PC Pitstop Performance check and the results show LOW video performance of 14.42MPS. This SUCKS!

A similar test run just (2) weeks ago showed 93 MPS. I'm pretty sure that was with the old driver.

Why would a new driver KILL the video performance ????

See system specs in my sig.
 

A:NVIDIA GeForce 6200 Low Video Performance ???

6 more replies
Answer Match 63.42%

I've read a few of these topics before on this website, but do to the clutter, nothing helped.

About:
I have a BFG GeForce 6200 OC 256mb pci Graphics Card.
5.44.A2.05.01 Video Bios
91.47 ForceWare Version
My comp is a Presario SR1103WM

Everything else works fine, but when it comes to playing videos in (i believe) any format, the computer will slow way down (the computer is so slow I can't really keep track of cpu usage - I'm guessing 90-100%), and when I press ctrl-alt-del, then hit cancel, the problem disappears . However, youtube videos work just fine (wtf?).

Okay, so before I'm told to uninstall, use drivercleaner.net, and reinstall, I'd like to try any other possible solutions. I'm uneasy to obtain drivercleaner.net's software because you have to pay for it. I have a pet peeve when it comes to providing personal (financial) information online, so right now, I'm not diggin' it. Is there another driver cleaner program I can use that I can download for free, and that works just as good? Is using that driver cleaner the best way to reinstall?

Lastly, should I downgrade to this ForceWare version? Or is there a better option?
http://www.nvidia.com/object/winxp_2k_84.21.html

Thanks
 

A:BFG GeForce 6200 OC 256mb pci Video Problem

14 more replies
Answer Match 63.42%

Using Windows 7 and have lost my ability to access or adjust NVIDIA. Device Manager shows Error Code 43. This is above my pay grade so to speak. Do I need to replace the card?
 

A:NVIDIA GeForce 6200 Error code 43

make sure you have the latest driver. you can download them HERE. also, make sure its the correct version eg. 32/64 bit

_____________________
Computer Repair Cavite
Computer Repair Manila
 

2 more replies
Answer Match 63.42%

ok so I built this new computer
specs:

Asus K8N4-E Deluxe
AMD Sempron64 2600+
XFX GeForce 6200 TurboCache 256mb
512 Kingston RAM
WD 200gb caviar 7200 SATA

HD is OK, ran lots of diagnostic stuff. RAM's ok too, everything is fine.
I'm running winXP pro with all updated drivers, DirectX 9.0c and etc, everything runs ok but WoW...

What happens is that a minute after I log, wow starts to alt+tab to windows, and then alt+tabs back to wow, then back to windows and back to wow and so on.... This is driving me mad!!
Everything gets stuck...

I can manage to close wow and stop the alt+tabbing but thats in a right time when it gets back to the desktop and I have like 3 seconds to right click wow and close it.

After that, if I dont restart my computer, I can't play any other games. If I try to get back to wow again, it will freeze and restart my computer... with no BSODs, just freezes and bam, restart.

The attachment is the only error in the event viewer I can find so I *think* its the thing when I try to run wow a second time after it alt+tabbed to hell.

Any insights? I know this GPU is crap, it has only 64mb and takes the other 192 from my RAM, anyways, it should work. My old system has a geforce2 64mb mx400 and it can run WoW with no problem

I'll try running 3DMark to see if it locks my computer or something, and will try to induce that restart again to see if it generates any other event error and post it here.

Thanks ... Read more

A:Having problem with geforce 6200 (in World of Warcraft)

Tried to load WoW after the first crash and It won't let me, see attachment for the error message
 

6 more replies
Answer Match 63.42%

Hello; I've done some searching and experimenting, and at the moment I'm at a loss.

I've recently (a few hours ago) installed Windows 7 on my computer, at the same time as installing a new master HD. Most of the system came back up fine, with the exception of my second monitor/nVidia GeForce 6200 TurboCache card. In Device Manager, it displays with a yellow exclamation point; I've tried updating the driver through Device Manager both by using the default "update driver" option and allowing Windows to select it, and by manually installing three separate drivers (190.38, 191.07, and 96.85, which was suggested in another thread here). None of these have worked. Similarly, when attempting to run Windows Update, the optional update "nVidia - Display - NVIDIA GeForce6200 TurboCache(TM)" shows up as available, but fails to install each time I attempt it.

Given that I did have the case open for some time while installing the new HD and clearing out the dust, I'm entertaining both hardware and software/driver suggestions. I've run out of ideas for today and would be very glad to hear anyone else's suggestions. Thank you very much.

A:GeForce 6200 TurboCache not working properly

  
Quote: Originally Posted by vicemage


Hello; I've done some searching and experimenting, and at the moment I'm at a loss.

I've recently (a few hours ago) installed Windows 7 on my computer, at the same time as installing a new master HD. Most of the system came back up fine, with the exception of my second monitor/nVidia GeForce 6200 TurboCache card. In Device Manager, it displays with a yellow exclamation point; I've tried updating the driver through Device Manager both by using the default "update driver" option and allowing Windows to select it, and by manually installing three separate drivers (190.38, 191.07, and 96.85, which was suggested in another thread here). None of these have worked. Similarly, when attempting to run Windows Update, the optional update "nVidia - Display - NVIDIA GeForce6200 TurboCache(TM)" shows up as available, but fails to install each time I attempt it.

Given that I did have the case open for some time while installing the new HD and clearing out the dust, I'm entertaining both hardware and software/driver suggestions. I've run out of ideas for today and would be very glad to hear anyone else's suggestions. Thank you very much.


Hi. You left out the most important part, even more important that video card itself, when dealing with problems like this.

Please tell us which motherboard you're using.

Also, is that an AGP, PCI or PCI-e card? If it's AGP, your chipset may not be suppo... Read more

9 more replies
Answer Match 63.42%

Trying to build a Home Theater PC on a budget, this video card had no problems on another mobo and to preface this post this mobo has been in storage for 5 years. Anyhow, I started with Windows XP Home edition and the graphics card worked wonderfully and I was able to stream live tv on this motherboard and everything worked great. I then went on to install windows 7 Home Premium so that I could use the Windows Media Center interface and that is when everything went to crap. After the install I went and found the most updated driver for the nvidia 6200 which is versioin 260 (the microsoft website recommends version 256) I tried both because neither seemed to work. I have black horizontal lines across the bottom of the screen in some screens like when windows asks me a question I have to move the mouse aross the yes and no buttons in order to see them. On the home screen the bottom half of the screen has pixelated horizontal lines. During startup the lines are worse. I have tried this on two different monitors producing the same results. When I go into the Nvidia control panel I only have two options for my resolution which I also though very strange, 800x600 and 1024x800. This was not the case on a different motherboard that I worked with. I have seated and reseated the graphics card several times and don't know what to do with it at this point.

this is what I am running
ECS PT880Pro-A Mobo
Pentium 4 Prescott 3 ghz processor LGA 775
PNY GeForce 6200 256 mb AGP graphics c... Read more

More replies
Answer Match 63.42%

Well this is a very long story... lol I got this card nVIDIA GeForce 6200

Now when I got the card I put it in the pci slot & turned it on with Vga connected to it. The resolution was low as always with a new card. Keep in mind I have an onboard graphics card too. Now I went to install new drivers. When I finally got them installed on the boot up screen including windows boot up there were blue dots on the screen. (This wasnt happening before drivers). So I thought it might have been the drivers. To keep a long story short, I "uninstalled" the drivers. They werent completely gone somehow as card still had good resolution, then I got drivers from JATON's website, then after reboot the dots were red & green & in a diffrent pattern. Now ill try to uninstall drivers with a driver clean up tool, then add drivers from website again. My friend tells me the card may be damaged. He said a pixelpipeline may be damaged. I dont know. Well, any thoughts? Can somebody help me try to get the card working? Btw do you think this is a software or hardware problem? As in drivers or card? lol.
 

A:nVIDIA GeForce 6200 Installation Issues

15 more replies