Tech Problem Aggregator

GTX550 TI in mini tower help!

Q: GTX550 TI in mini tower help!

Hello,
I purchased a GeForce GTX550 IT graphics card a while back only to realize it wouldn't fit into my computer's case (it's a mini ). I was wundering if perhaps theres a way to hook this up externally? I believe it would need a seperate power supply, if it doesn't could you possibly give me the link to a moderatelly priced one that fits my case.
System specs:
Windows 7 Home premium 64-bit
AMD Athlon II X2 220 dual core processor
Nvidia GeForce 6150SE
DVD-Super Multi Drive
4GB DDR3 mem.
500GB HDD

A: GTX550 TI in mini tower help!

No. Video cards connect directly to the motherboard. There aren't any external options, much less a way of using an internal card externally.

1 more replies
Answer Match 62.58%

Got a store-bought Gateway SX-2800 model which is a mini-tower. Upgrading the video card, and as a result I am also upgrading the power supply.

Being a mini-tower, will it definitely need a specialized power supply, or will a standard PSU work?

If it needs a specialized PSU where do you suggest getting them and how - would I take the dimensions of my PSU and then talk to a manufacturer? Or would buying a new case along with a standard PSU be cheaper?
 

A:Mini-tower Power

16 more replies
Answer Match 62.58%

Had a KDM-MTFX9320 320W TFX. Ordered a KDM 320W FLEX MFX 9320C. Will this work?
 

More replies
Answer Match 62.58%

There are usually 3 HDD in this case, but in this image, when I installed the GTX 260, I had to remove one. Don't use it anymore though, it was Vista. It's now in an external HDD case for backing up two other PCs in the home...

A:Mini-Tower Close-up

That wire mass can't be good for air flow. You might want to clean it up a little.

7 more replies
Answer Match 62.16%

Hi, I'm using an 755 SFF now and the system is operating wll. However the adding of a better grafic card is problematic cause of the limited space.

Now I'm thinking of finden a (evt. defect Mini Tower model) and put the motherboard, HDrive of the 755 SFF into the larger Mini Tower case and buy a better grafics card.

Are the components compatible?
thanks

A:Motherboard etc. 755 SFF compatible with the Mini Tower?

Hello, HEINFLHS
Yes everything would work well however from what I know your motherboard is smaller it will go in to the chassis though none of the expansion slots will align with the chassis slots as your motherboard as smaller than the chassis. I suggest you pick up a 755 MT motherboard for full compatibility and by the way these are like $50 or maybe less and you could just put all your current hardware on it (cpu, ram ,hard drive cable, etc) with no capability issues.

1 more replies
Answer Match 62.16%

Hi,I am looking into upgrading the gpu of this 745 that I currently don't have yet. I have my eye on an Asus NVIDIA GT 710, but was wondering if it will fit in terms of height. I read online someone expressing concerns about it needing two slots space, but that was never clarified or refute in the discussion. Would this one fit?If not, what other options do I have in a similar price range? I would prefer to go for a 2GB card, but will settle for 1GB if I have to. Thanks for your time.Regards

More replies
Answer Match 62.16%

Hello,
I own a Optiplex 760 Mini Tower. 
I found out that I have a 0G214D Motherboard. Unfortunately I still can not find out if this means I can upgrade to a Quad core. Can you please tell me if this is the case and which CPU is the most powerful Quadcore I can use? And if not wich of the Dual cores I should use. BTW, i use an Nvidia  GTX750ti using 60W.
Thank you and all the best
Julian

A:Optiplex 760 Mini Tower Quadcore

http://www.dell.com/downloads/ap/products/optix/optix_760_tech_guide.pdf
Q9650 is max.  Bios update should be done BEFORE trying to change cpu.

 750 TI only fits in the TOWER and Only After Cutting the Bracket off and ONLY with Short cards with 1 fan aka 8.4 inches max.

There are no single slot cards.   If one was put in they hacked the bracket in half or removed bracket altogether.  If you remove the bracket on EVGA models you can use tin snips to CUT OFF half the bracket.  The cooling vents are blocked so you might also have to drill holes in the case to let air out.  Long Cards with 2 fans DO NOT FIT and WILL NOT EVER FIT into the Tower or any other size.

Only Short cards with Short fans Fit.

1 more replies
Answer Match 61.32%

Purhased an AXC-704G-UW61 mini tower Desktop on Wednesday Sept 14, 2016, whereas the SNID/Serial Number sticker was to be was not there and Information found on dicscarded box needed to register, Acer has refused to send a replacement sticker so I now have to keep box. Any options to avoid boycotting ACER?

A:AXC-704G-UW61 mini tower Desktop

SNID is available on BIOS too, press Del at boot and check on mainscreen.

1 more replies
Answer Match 61.32%

I have a Intel core2 duo E8400 3.00 GHz and 4 sticks of 2 GB ram sticks = 8 GB
Please tell me what i can upgrade to max for best performance i dont know that much.

A:Max processor and ram for the Mini-tower optiplex 755 (BIOS A17)

You are maxed out at 8GB.

1 more replies
Answer Match 61.32%

I have the HP Compaq DC7700 Convertible Mini-Tower(CMT) with Windows 7 SP1 on C partition, and WinXP Pro 64 bit on D partition. I have bios Version Hewlett-Packard 786E1 v01.16, 8/17/2011 Is there a later version of the bios for my machine?  Here are the msinfo32 information if it helps=========================================OS Name Microsoft Windows 7 Home PremiumVersion 6.1.7601 Service Pack 1 Build 7601Other OS Description Not AvailableOS Manufacturer Microsoft CorporationSystem Name HOMESystem Manufacturer Hewlett-PackardSystem Model HP Compaq dc7700 Convertible MinitowerSystem Type x64-based PCProcessor Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz, 1867 Mhz, 2 Core(s), 2 Logical Processor(s)BIOS Version/Date Hewlett-Packard 786E1 v01.16, 8/17/2011SMBIOS Version 2.4Windows Directory C:\WindowsSystem Directory C:\Windows\system32Boot Device \Device\HarddiskVolume2Locale United StatesHardware Abstraction Layer Version = "6.1.7601.17514"User Name home\BillTime Zone Central Daylight TimeInstalled Physical Memory (RAM) 4.00 GBTotal Physical Memory 3.94 GBAvailable Physical Memory 2.77 GBTotal Virtual Memory 7.87 GBAvailable Virtual Memory 6.25 GBPage File Space 3.94 GB=========================================

More replies
Answer Match 61.32%

i have searched the forum but have not been able to find anything that says it is ok to use a regular atx power supply in an optiplex 960 mini tower.  I have an 620 mini tower and it uses a regular atx but no info on the 960.  Anyone know if it is ok , or have to use dell only power supply

A:atx power supply with optiplex 960 mini tower

Optiplex 960 MT power supply upgrades

1 more replies
Answer Match 61.32%

Currently, I'm using a Gateway PC (Mini tower) with the built in Intel GMA 4500 HD Graphics. I'm looking to find a decent Mini tower PCI Express Graphics card that can run games like Call of Duty Modern Warfare 2 at a low-decent resolution at a high FPS - preferrably 80-90 or more if possible. My price range is basically anything under / around $70.

I found a Radeon HD 5450 1 GB supposedly low profile graphics card on Amazon, any opinions on that quality of that?

http://www.amazon.com/XFX-Display-Low-Profile-PCI-Express-HD545XZAF2/dp/B0036TFXWC

I'd just like some suggestions, please. Thanks.
 

A:Solved: Mini tower graphics Support

6 more replies
Answer Match 61.32%

I'm wanting to get myself the Q6600, and I own the Optiplex 760 Mini Tower. My motherboard is 0M858N.
I've had problems finding answers for this, some say it can, some say it cannot.
Does anyone have an idea?

More replies
Answer Match 61.32%

I have an Optiplex 790 Mini-Tower with an i5-2400 and integrated Intel HD 2000 video.
The case has both a VGA and Display Port connector, I am presently using the VGA port. I am investigating going for a Dual Monitor setup and am confused whether I can do so without having to purchase a discrete video card. I am reading conflicting reports that some say yes and others no. Can some kind soul please confirm one way or the other ?
I do not use the PC for gaming, it is work only with the occasional video and web browsing. Mainly I need dual monitor for multiple file editing, scripting, database programming etc.
Many thanks, Fin.

A:Optiplex 790 Mini-Tower Dual Monitor ?

Hi Fin,
OptiPlex 790's onboard video solution supports both VGA and DisplayPort at the same time. You can connect two monitors to the computer without adding a discrete card.
Please let me know if you need further information.

4 more replies
Answer Match 61.32%

I Have Dell optiplex 745 With 3.4 Ghz Pentium D Processor with 4MB cache Memory .... Recently I wanted To Upgrade my p.c to dual core 2.6Ghz  E5300.. when i put Dual core processor into my board and truned on p.c the all lights was green and fan was running too fast and mY lcd Does Not dsplay anything .... And also My bios version is 2.6.3 .. what is the main fault in it.... kindly anyone tell me.... what should i do ???

A:Dell Optiplex 745 Mini Tower Upgrade

Hi Asfand_Munib,
Before installing a new processor, please update the BIOS to latest version from Here.
Note : Please save and close all running programs and documents and disconnect all external peripherals (printer, flash drives, external hard drives, etc) and connect the computer to a surge protector before updating the bios.
If all the lights are green and you are not receiving any beep codes from the system then it means that the processor has been installed correctly. Please check if the keyboard lights (Capslock, Numlock, etc) respond when you press the corresponding keys. Please verify the connections on rear of the system and check if they are connected firmly. Also, check if you are able to hear any windows jingle sounds after some time when you power on the system. Please share the exact model of Optiplex 745 you are using as it comes in 4 form factors viz Ultra Small Form Factor (USFF), Desktop (DT), Small Form Factor (SFF), and Mini-Tower (MT). A picture is attached below.

Please reply with the information. Will take it further from there.

14 more replies
Answer Match 61.32%

I might be building a new computer soon, I am wondering if these parts will go well together:

Motherboard: BIOSTAR H61ML LGA 1155 Intel H61 Micro ATX Intel Motherboard
tower:LIAN LI PC-A05NB Black Aluminum ATX Mini Tower Computer Case
Video card: EVGA SuperClocked 01G-P3-1452-RX GeForce GTS 450 (Fermi) 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
Memory: CORSAIR 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 Desktop Memory Model CMV8GX3M2A1333C9
monitor: Hanns-G HW-173ABB Black 17" 5ms Widescreen LCD Monitor 250 cd/m2 600:1 @ 1440x900
Power Supply: Hanns-G HW-173ABB Black 17" 5ms Widescreen LCD Monitor 250 cd/m2 600:1
Processor: Intel Core i5-2300 Sandy Bridge 2.8GHz (3.1GHz Turbo Boost) 4 x 256KB L2 Cache 6MB L3 Cache LGA 1155 95W Quad-Core Desktop Processor BX80623I52300

If any part in here is not compatible please tell me and point me in the direction of a compatible part if you can. I do need the tower everything else can be changed.

Thank you very much and have a nice day!
 

A:Building a computer witth a mini-ATX tower

Typo: you listed the monitor twice, once under PSU, Otherwise those parts look fine however even though it is a minitower due to the front mounted power supply that case will support a full ATX motherboard. I would personally recommend a Full ATX motherboard since they offer much more expansion. This is a good option and only costs slightly more, Although If you go with something like this you will get SATA 6gbps, USB 3.0, more memory slots, and a faster chipset.

Also Biostar motherboards are ok but far from the best try to look for boards from Gigabyte, ASUS, or MSI.
 

10 more replies
Answer Match 60.9%

Hi, I am doubting wether my Optiplex 755 is a Mini Tower or SFF model.

I found the following tagd:

Service Tag: 
<ADMIN NOTE: Service tag removed per privacy policy>
Express Service Code: 
<ADMIN NOTE: Express service code removed per privacy policy>

I cannot find the explanation on the website.

Does anybody know where I can find the info?
thanx

A:Finding out Model 755 Optiplex service tag Mini Tower or what?

Match the appearance of the case with the photo in the pdf below (from L to R, mini tower, desktop, SFF, and ultra SFF.
www.dell.com/.../opti_755_techspecs.pdf

3 more replies
Answer Match 60.9%

Brand: Gateway
Type: Desktop
Model: LP MINI TOWER TB3 Essential 500

Problem: Won't turn on
Manufacture Date: 12/02/99
 

A:Gateway LP MINI TOWER TB3 Essential 500 Desktop won't turn on.

This computer is 16 years old and came with Windows 98. It isn't worth spending time worrying about it; it is just too old and slow.
Processor: Intel Pentium III, 497 MHz
It probably has at most 256MB of RAM.
 

2 more replies
Answer Match 60.9%

There is a design problem with the OptiPlex 7040 Mini Tower case that leads to excessive noise. The plastic grid panel on the front of the case rattles loudly, especially when the system is operating under a heavy computational workload. I'm not certain if the vibration originates from a fan or from the hard drive, but it's clearly causing resonance in that plastic front grid panel. I'm certain that the front panel is what's making the noise. The noise goes away completely if I press my finger against the front panel (and resumes immediately when I remove my finger). My current workaround to the problem is to prop up the front of the case with a piece of bubble wrap. Dell's engineers should consider altering this case design to address the vibration problems.

More replies
Answer Match 60.9%

I cannot get an OptiPlex 755 Mini Tower to power on. It had been running fairly continuously in an office environment on a APC battery backup/surge protector until it failed Monday morning. Then there was some orange light that was flashing or continuous. When the computer was turned off, it would not come on again. Sorry for the vagueness, but this is second-hand information. I found a fair amount of dust inside, but I've seen far worse on computers
When I push the power button I get no change: no light in the power button, no diagnostic lights, no sounds, no fan movement. When I connect it to power the "AUX LED" light on the motherboard comes on a solid yellow/amber so the PSU is putting out something.
Is this likely to be a PSU problem? Is there some way to pin it down other than buying a replacement PSU?
Thanks for any help,
Joe M

More replies
Answer Match 60.9%

I need help updating the BIOS on my HP dc7800 CMT. I keep getting this error: The system BIOS updte file (C:\Users\f\Downloads\ROM.CAB) is missing or corrupt. The system BIOS will not be updated. I tried to update using the sp53611.exe (8.0 MB) 1.32 Rev. A(6 Dec 2011) HP Compaq Business Desktop System BIOS (786F1 BIOS) Which can be found here. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3459243&swItemId=vc_97114_1&swEnvOid=4059 The current version of my BIOS is: 786F1 v01.04 7/18/2007 I am running Windows 7 64-bit  Ultiate. I noticed on the page for the software (linked to above), it mentions most flavors of Windows 7 64 bit, but it DOESN'T mention Win 7 ULTIMATE 64-pit. Here is what I did: 1) Restarted computer in safe mode2) Logged in as administrator3) Started task manager to make sure all apps and most services were stopped3A ) as an extra precaustion, I even stopped Windows Defeneder4) Double clicked sp53611.exe and let it install software.5) This opened a web page. I clicked on the link that was under the Update Bio from a windows environment.6) The process started, but then I got the error above. Any ideas on what to do next? Is it possible that the BIOS CAN'T be updated because the software doesn't support windows 7 64-bit ULTIMATE??? Thank you in advance. I have a new graphics card coming today (Radeon HD 6570 - which was recommended by Mr. Paul Tikkanen, Thank You), and I guess that I... Read more

A:Need Help Updating Bios dc7800 Compact Mini Tower : ROM.CAB ...

Hi: There should be no need to update the BIOS if everything is working correctly. If you want to update the BIOS you should use the built in Flash System ROM menu in the BIOS. That is the safest and easiest way to flash the BIOS. All you need is a USB flash drive formatted with the FAT 32 file system. Download the latest BIOS update and run it. You should get an instruction page.  On that page, you want to select the F10 flash system rom option and you should see a view contents of DOS flash folder. Copy all of the files in that folder to your usb flash drive. Plug the flash drive in the usb port, reboot the PC and at the beginning of the HP welcome screen, tap the F10 key to access the BIOS. There will be a menu to Flash System ROM. Select that and it should see the BIOS update files on the usb flash drive.  Then follow the onscreen instructions to proceed with updating the BIOS.

7 more replies
Answer Match 60.9%

Vostro 200 Mini Tower tries to start, shuts down, then repeats until the power button is pressed to stop the cycle.
The power button is steady amber
The blue drive activity light turns on
MOBO light is on
All fans (CPU, GPU, PSU, Case) are working
Video card removed and reseated
Memory modules removed and reseated
PSU connector to MOBO reseated
CMOS battery replaced
All connectors feel solidly connected, yet there seems to be no power to the monitor or the keyboard.
I've disconnected power, drained residual power and reconnected the power.  The cycling continues.
I would appreciate some other suggestions on what I can try (like - why the monitor and keyboard are not receiving power from the computer).

Thank you.

A:Vostro 200 Mini Tower tries to start, shuts down, then repeats

RJ318
Vostro 200 Mini Tower tries to start, shuts down, then repeats until the power button is pressed to stop the cycle.
The power button is steady amber
The blue drive activity light turns on
MOBO light is on
All fans (CPU, GPU, PSU, Case) are working
Video card removed and reseated
Memory modules removed and reseated
PSU connector to MOBO reseated
CMOS battery replaced
All connectors feel solidly connected, yet there seems to be no power to the monitor or the keyboard.
I've disconnected power, drained residual power and reconnected the power.  The cycling continues.
I would appreciate some other suggestions on what I can try (like - why the monitor and keyboard are not receiving power from the computer).

Thank you.
RJ318
Are there any 'Beeps', see page 80?
http://ftp.dell.com/Manuals/all-products/esuprt_desktop/esuprt_vostro_desktop/vostro-200_Owner%27s%20Manual2_en-us.pdf
Bev.

4 more replies
Answer Match 60.9%

Hi everyone, I'm new on this forum. I bought 2 years ago a dell optiplex 3010 mini tower, suddenly it stopped working, I have no screen, no video or any kind of sound, the only thing it does is to light up the number 3 & 4 lights on the front panel. What can I do ?

Thanks

A:Optiplex 3010 mini tower diagnostic lights 3 & 4

Hi ,
Thank you for writing to us ! 
To understand the cause of this issue I would ask you to try these steps and advise the result ,
*Disconnect the system from wall socket ,then press and hold the power button for about 15 - 20 secs .Then connect the system to wall socket and try to turn on the system .Here we are trying to release static charge from the system .
*Then disconnect all the peripheral components from the system and try to turn on the system .
*If the above step fails then remove all the memory modules from the system and try to turn on the system with only 1 memory module at a time .
If there are any more queries do reply to this post with system service tag sent via private message .
Hoping to hear from you soon .
Kind Regards,

8 more replies
Answer Match 60.9%

Hello, my Optiplex 7040 just arrived this week.  I bought a Kingston 120mb SATA ssd in a 2280 stick, so I'm trying to see if I can use this for my main boot drive (Windows 10) and then move the 500gb 3.5 Sata drive over to a storage drive.When I install the 120gb 2280 stick into the M.2 slot, and load the bios...   *It shows up under General / System Information / PCI information / Slot5_M.2 & also under Device Information / SATA-4   *When I look under System Configuration / Drives, it also shows up under SATA-4 here as well.  However, it's showing up as a 0gb Drive under 'type'!
So when I boot from a USB drive to try and reinstall Windows on this M.2 stick, it's not showing up at all.
When I connect the M2 SATA drive and load Windows on the existing 3.5 SATA drive that came with the 7040, the M2 2280 stick shows up in 'device manager' under the hard drives.  The serial # there corresponds to a Toshiba-form hdd; unfortunately, I can't do anything with it in Windows 10.
SATA operation is set to AHCI, and I am booting into legacy with the USB.Any thoughts?  I'm wondering if maybe I have a dead memory stick.  There's no real way I can test it on another computer to see what happens.

A:Optiplex 7040 Mini Tower M.2 slot upgrade....

For Windows 10 you should have a UEFI Boot with SecureBoot Enabled. The USB should be made using the GPT partition scheme for UEFI BIOS. I hope you mean 120 GB and not 120 MB....
See here for details:
http://dellwindowsreinstallationguide.com/download-windows-10-oem-and-retail-iso/ 

2 more replies
Answer Match 60.9%

I intend to purchase optiplex 7040 MT for gaming purpose. So I would like to know:
1. Does the motherboard have standard CPU and motherboard power connectors or proprietary ones?
2.  Is it possible to replace the stock PSU with a cooler master extreme power plus 600W? If no, then what size /kind of PSU will fit there?
3. Is it possible to fit a gtx 1080 in there?

More replies
Answer Match 60.9%

Hi out there to Vistax64. I am a recent XP to Vista user. I have a Vostro 200 mini tower (specs below) that has been running XP pro for the last few years - couldn't stand the GUI anymore lol - so I installed Vista HP and am very happy with the new interface and features. After tweaking some, the desktop appears from cold start in 30 seconds or so and almost everthing runs as snappy as it did before with XP. But the task manager is showing an average use in physical memory of 1.17 gigs, CPU usage is higher, and some, not all, internet pages scroll slowly e.g. Yahoo news pages, Hearts of Space etc. where as they were fine before. Everthing else on the internet, including this site, works well - though a few installs like Starry Night Enthusiast and a John Deere farm game are slower.

My question is this: Would installing a seperate video card give me better all-around performance or would another gig of ram do the trick? And what brand/type of video card do you folks recommend?

Intel Core2 Duo E4500 @ 2.3ghz
2 Gig of Kingston RAM
Intell G33 Express Chipset (on motherboard)
80 Gig WD SATA Hard Drive
Seasonic 350w PSU


Thanks for the opportunity to have my questions answered and I'm looking forward to cruising the site here!

A:Video Card For Dell Vostro 200 Mini Tower

Windows will allot 50% of your ram by default, for when you need them programs. Remember, rams fastr than hard drive, and why have all that ram and not use it.

For your power supply, a nvidia 430/440 or an ati/amd 6450, maybe get away with a 6550... Seasonics are quality.

The slowdown is probably because Vista is a bit more of a beast than xp, and graphics can be a bit more hefty.

4 more replies
Answer Match 60.9%

i searched in a lot of forums to see if a gtx 750 ti is compatible with the dell 660 mini tower and i cant find a reliable source and i need help to see if its worth it to get it if it is compatible.

 

More replies
Answer Match 60.06%

Hi,
i am using dell optiplex 780-Mini Tower. last week my pc didn't startup windows and stuck load on dell logo screen with flash light showing 1 - 4 and off LED light. also  didn't access/load boot menu, bios. i tried power on with all external devise unplugged but show same problem.
can you pls help me out. thanks in advance. 

A:dell optiplex 780-Mini Tower. flashing 1 and 4 with off power light

You ram is bad.  F2 Bios setup requires working ram.

1 more replies
Answer Match 60.06%

i have a Dell Vostro Mini Tower with the following specs:Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz
4GB RAMIntel(R) HD GraphicsI have ran a System Requirements check and it says I have 2048MB of Video RAM.  i would like to upgrade this to 4GB if possible.  would anyone be able to recommend a card that is compatible with my computer?I understand the wattage of my power supply matters also, would anyone know what this is?Thanks in advance

A:Upgrading Video Card on Dell Vostro 270 Mini Tower

The 2GB you are referring to is how much system ram is being given to the onboard Intel GPU video to use. You cannot increase that to 4GB. But you can add a discrete PCIe x16 video card. The Vostro 470 has a 300w power supply. So that will limit you as to which video card you can use. The two video cards that we shipped on this model were =
YG17P Nvidia GeForce 640GT 1GB67V2J Nvidia GeForce 620GT 1GB
Or you could remove our power supply and install a higher wattage power supply and then get a better video card.

2 more replies
Answer Match 60.06%

I ordered the new Optiplex 7040 minitower and its a horrible design.  I tried to open the case and they have a plastic tab that snapped off.  the spring and slide assembly inside. You can't reach the expansion bays and the case design is horrible.  It reminds me of the old style Acer PC's that ended up being throw aways.  Sending this one back right away.  Biggest flop I've seen in a new Optiplex!

More replies
Answer Match 60.06%

Hi TechSpot Forums!

I own a Dell Optiplex GX280 Mini-Tower PC, and am seriously considering buying a graphics card for it.

My question to you is, which would best be compatible with my specs?

System Specs:

Dell Inc. OptiPlex GX280
Windows XP Professional Service Pack 3
3.00 gigahertz Intel Pentium 4
2552 Megabytes Usable Installed Memory
500.10 GB HDD

Current Video Card:

Name: Intel(R) 82915G/GV/910GL Express Chipset Family
Manufacturer: Intel Corporation
DAC Type: Internal
Approx. Total Memory: 128.00 MB
Current Display Mode: 1400 x 1050 (32 bit) (60GHz)

Does installing a graphics card mean you can achieve higher resolutions on your LCD monitor? That is partly the reason I will be purchasing one.

Thanks for any info or suggestions,

~ TomHax
 

A:Graphics card for Dell Optiplex GX280 Mini-Tower?

Does installing a graphics card mean you can achieve higher resolutions on your LCD monitor?Click to expand...

That depends on the maximum resolution supported by your monitor.

What's your main reason to purchase the card? What's your budget?
 

7 more replies
Answer Match 60.06%

I have a Dell Vostro 230 Mini Tower, and it currently has the Intel Pentium E6500 processor. I would like to upgrade to something better, because my current processor does not meet the minimum requirements of some games I would like to play. I was wondering which processors I could upgrade to? I know that the new processor has to fit the socket on the motherboard, but I don't know how to find out what socket my current motherboard has, or even what motherboard it is.
I would also like to know, if I don't upgrade the processor, but instead get a new motherboard, can I get any motherboard, and plug it in, and will it come with a new processor, or will it have to fit my current processor? Does upgrading the motherboard make much difference to the CPU speeds if I don't actually upgrade the processor?
I am running Windows & SP3, DirectX 11, with 4GB RAM, and i also have an ATI Radeon 5670 HD Graphics Card, and a 300W power supply. 
Would I need to get a new power supply if I upgraded the motherboard or processor? 

A:Upgrade processor or motherboard on Dell Vostro 230 Mini Tower

Hi,
I have mentioned list of processors which are also compatible with Vostro 230 mini tower.




Number


Code Name


Cache


Clock Speed


Front Side Bus




Q9650


Yorkfield


12 MB


3.00 GHz


1333 MHz




Q9550


Yorkfield


12 MB


2.83 GHz


1333 MHz




Q8400


Yorkfield


4 MB


2.66 GHz


1333 MHz




Q8300


Yorkfield


4 MB


2.50 GHz


1333 MHz




E8600


Wolfdale


6 MB


3.33 GHz


1333 MHz




E8500


Wolfdale


6 MB


3.16 GHz


1333 MHz




E8400


Wolfdale


6 MB


3.00 GHz


1333 MHz




E7600


Wolfdale


3 MB


3.06 GHz


1066 MHz




E7500


Wolfdale


3 MB


2.93 GHz


1066 MHz




E6300


Wolfdale


2 MB


2.80 GHz


1066 MHz




E5400


Wolfdale


2 MB


2.70 GHz


800 MHz




E5300


Wolfdale


2 MB


2.60 GHz


800 MHz




450


Celeron


512 KB


2.20 GHz


800 MHz




Vostro 230/230s has been tested with Intel G41 chipset (Motherboard) with ICH07 only. Motherboard and processor are two different components. I would suggest you to upgrade the processor. Please reply for further assistance. Thanks & Regards Manshu S #iworkfordell

15 more replies
Answer Match 60.06%

I'm considering buying a used Dell OptiPlex GX790 MT computer, and I'm wondering what the maximum video card length can be without having to remove the hard drive cage.

A:Used Dell OptiPlex GX790 Mini tower video card

The hard drive cage isn't the only problem.  The power supply is not standard.
So a short GTX750 TI non SC would be the max.
 

4 more replies
Answer Match 60.06%

Hi everyone:

I was curious if anyone else experienced this issue? I have a Dell OptiPlex 7010 desktop/mini tower that I bought off the official Dell site. I configured that mini tower to have an SSD drive as the main drive, which I like very much, except one very annoying issue. Sometimes out of the blue Windows 7 will hang up, I can't click anything and the mouse starts spinning in a circle. This continues on for about half a minute and then it always comes back to life. Suddenly I start getting all my previous clicks moving windows, opening things, etc, all at once. This happened at least a dozen of times by now and I started to notice that when this happens the HDD/SSD LED on the case glows solid, which made me suspect that there's something going on with the drive itself.

Does anyone know what's going on and how to fix this?

PS. I tried contacting Dell support about this issue but they are pretty useless. I spent several hours in a chat with a guy once that eventually simply hung up on me. Then I emailed someone at Dell, for which the guy replied with instructions to run their hard drive diagnostic tool, which I did, that did not show any errors. (Note that I don't have a hard drive, it's a solid state drive.) I replied to the guy only to never hear from him again.... So I think I'm pretty much done with the Dell support

A:Dell's Optiplex 7010 mini tower SSD hang-up issue

Hi,

Have you tried updated the firmware on the SSD?

9 more replies
Answer Match 59.64%

Hi
I have a Vostro 460 MT from Dell.
The Specs:
i5-2400
8GB RAM
320GB HD
Stock PSU - 350W

I had a NVIDIA GT 210 card in previously which I sold and bought an R7 240 to upgrade with. When plugging in the R7 240 and booting up. I get NO VIDEO SIGNAL. NO BIOS SPLASH SCREEN etc.
NOW if I take the card out and use the onboard VGA it works fine. The NVIDIA GT 210 worked fine too.

Why does this card not work? Is there a solution to my problem?

More replies
Answer Match 59.64%

I have a Dell OptiPlex GX280 mini-tower (smallest one thereis), and the original 160W power supply died a few months ago without warning. I ordered a new power supply, but accidentally ordered the wrong size (210W for one of the larger towers). I used it in the meantime until I could get the proper size (although the 210W supply wouldn’t fit in the mini case – I left it out of the case and ran the wires through the power plug hole). The computer booted up just fine with this 210W power supply. I finally got around to ordering the 160W smaller correct size, but that power supply would not boot up the computer (just got an amber flashing light). Thinking it was just faulty, I sent it back and requested a replacement. The replacement did not work either. I ordered a third replacement, and the third did not work either! So now I am back to using the 210W power supply (No. HP-U2106F3) which does not fit in the computer housing. I know these Dell OptiPlex machines are notorious for having power supply and capacitor issues. But the question is, why will the computer power on using the 210W power supply? I contacted Dell and they were of no help whatsoever. The guy told me that 160W wasn’t enough to power my machine and to order a 210W power supply correctly sized for my chassis. Gee, thanks! First of all, they don’t make 210W that fit in the mini towers, and second of all, why did it used to work just fine??? Oh, and no I have not upgraded anything (i.e., video card, etc.) which... Read more

A:Dell OptiPlex GX280 mini-tower power supply problem

16 more replies
Answer Match 59.64%

Hello everyone.

Can someone post a good GFX card for no mor ethne $100 for a miini tower PC such an emachine El series etc. So a low profile GFX card. My friend does some basic gaming WoW, Moonlight etc.

i know a regular card is too big. What is one of the best 100 dolalr or below gfx cards that are low profile and can fit into mini tower PCs? The slot can be the regular PCI 2.0

Thanks guys
 

A:Solved: Best budget Graphics card for mini tower form factor?

The biggest problem with OEM PC's is that the power supplies aren't typically up to the task of an addon card. So it's generally recommended to replace the power supply as well. With this being a mini-tower, I wouldn't be surprised if it does not use a standard sized power supply, so that is likely not an option.

If you want to simply try a new card anyway, your options will be limited by the card size. There isn't much of a selection of low profile cards. Find the latest generation chipset which fits your budget.
 

2 more replies
Answer Match 59.64%

Dell Optiplex 3010 Mini Tower
intel core i3 3220 3.30 Ghz
4 GB RAM
265 watt PSU
24 pin connector
INTEL HD 2500 GRAPHICS

More replies
Answer Match 59.64%

So I bought a mini tower. It did not come with a card reader. I was looking at some at a few places, then I get the credit from dell rewards and tried to find the card reader on dell.com. Many Vostro 3900 come with one, so I know dell makes them. But I tried and tried but can not find them. Does anyone know what to search for? Thank you!

A:Vostro 3900 Mini Tower Multimedia card reader on dell.com

Hello Mathcat
Thanks for writing to us. 
If you are looking for an internal card reader, then we would request you to talk to part sales team on 1-866-440-3355 . 
Have a good one. 

1 more replies
Answer Match 54.6%

Hi, Currently I'm using a dual core 6850 and I'm thinking about buying a quad core. I have a PSU of 500 W as spare.

Can i replace the CPU to a Quad Core without changing the cooling system?

A:replace dual core CPU by quad core what about heatsink? in Mini Tower 755 Optiplex

heinflhs
These are the specs of the spare PSU. Aren't they better than the original Dell PSU?
That power supply is ATX and not EPS12V
Better is not the issue.  Dell power supplys are 80 percent efficient not 70 percent ATX.  The -5v rail is an issue as well as this may cause a motherboard fire or damage your system.  Its a dead giveaway that this is a power supply from 1990 to 2000.
What current is on which rails is not trivial. There is a single 12V RAIL on that unit and its max is 17A
EPS 12V units have multiple rails of 12V @ 18 amps each.  MAX Power on the 12V rails is 264w not 204w
That unit has a lot more on the 5V and 3.3V rails at the expense of the 12V rails and CPU 4 pin connector. So no that spare unit is not likely to work well if at all.

Recommended update or replacement is EVGA 750B1

4 more replies
Answer Match 54.6%

Ok so I just recently got a Dell optiplex GX 755 PC that has- 
*Intel core 2 quad processor 2.4 GHz
*8GB ram
*320GB hard drive (kinda small i know, i'm looking to upgrade that as well)
I'm posting this here to see if anyone knows mainly what graphics card i could get that would make my PC gaming friendly. It doesn't have to be the most amazing stellar quality card out there since iv had (some) people tell me that you cant upgrade these PCs much. But just some good quality advice on the subject and maybe a recommendation on what card brand to get as well as the specs for it. Also a recommendation for a video card would be greatly appreciated as well. Sorry for my ignorance on on the subject, i am new to the PC world. I ended up having to get this computer in a pinch because I am a small time graphics design artist and my laptop died, and I had orders coming in. I'm not looking for a quick fix to the problem so even if anyone has a solution that may take a bit or quite a few steps to get underway, the help is still greatly welcomed! I am hoping if its at all possible to make a good situation out of this and maybe build this PC to fit my needs. Thank you to anyone who can help!

More replies
Answer Match 54.6%

Ok so I just recently got a Dell optiplex GX 755 PC that has- 
*Intel core 2 quad processor 2.4 GHz
*8GB ram
*320GB hard drive (kinda small i know, i'm looking to upgrade that as well)
I'm posting this here to see if anyone knows mainly what graphics card i could get that would make my PC gaming friendly. It doesn't have to be the most amazing stellar quality card out there since iv had (some) people tell me that you cant upgrade these PCs much. But just some good quality advice on the subject and maybe a recommendation on what card brand to get as well as the specs for it. Also a recommendation for a video card would be greatly appreciated as well. Sorry for my ignorance on on the subject, i am new to the PC world. I ended up having to get this computer in a pinch because I am a small time graphics design artist and my laptop died, and I had orders coming in. I'm not looking for a quick fix to the problem so even if anyone has a solution that may take a bit or quite a few steps to get underway, the help is still greatly welcomed! I am hoping if its at all possible to make a good situation out of this and maybe build this PC to fit my needs. Thank you to anyone who can help :)

More replies
Answer Match 54.6%

Hi, I might be able to buy a second hand Optiplex mini tower and I would like to install the motherboard etc. of my Optiplex 755 SFF.

Wilt thi fit?

The idea is that with the Mini Tower I can buy a better GPU.

thanx.

A:Does motherboard of Optiplex 755 SFF fit in a Dell optiplex 745 dualcore mini tower?

No it wont fit.   The board layout, number of slots etc is different.

2 more replies
Answer Match 54.18%

Hey guys,

I just need an opinion regarding these video cards (Nvidia gtx550ti 1gb ddr5 or HD 6770 1gb ddr5) because I can't seem to decide which one is better. In Tom'shardware's hierarchy chart, they are at the same tier and at microcenter, they almost have the same price.

So im just asking, which would you prefer? Im also gonna upgrade my PSU to a 600W aero cool strike-x so no need to worry about that.

THANKS a lot!
 

A:GTX550 ti vs HD 6770

8 more replies
Answer Match 52.92%

Dear community,
I hope you will be able to help figure out this issue.
I swapped my old GTX550 for a brand new MSI GTX770 last week.
Since then and when the computer seems to be running a lot of heavy programs (like vmware nested environment + BF4) I tend to get some BSODs .
At least one per day .

I did not have any issue at all on this computer before starting using the GTX770.

I did a clean install of the VGA drivers , updated the mobo bios to the lastest one , my power supply is a Cosair 650w , despite the fact I have 5 HDs + 2 DVD reader+the GTX770, it seems to do his job .

I am running out of idea .....

I have followed the instructions , the zip file is attached to this thread.
Thanks in advance for your help.
David

? OS - Vista/ Windows 7 ? Windows7 ultimate
? x86 (32-bit) or x64 ? X64
? What was original installed OS on system? This one
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? No
? Age of system (hardware) 18 month
? Age of OS installation - have you re-installed the OS? No .... approx 18 month

? CPU - Intel I7 3770k
? Video Card MSI lighting GTX770
? MotherBoard Asus P8Z77-V - latest BIOS freshly updated
? Power Supply - brand & wattage - Corsair 650 Watt

? System Manufacturer
? Exact model number (if laptop, check label on bottom) - N/A

A:BSOD - After changing from GTX550 TO GTX770

Second system I've seen in the last 2 days running VMware, with no windows updates and a ACER/GATEWAY/PACKARD OEM license.
Since this is not a ACER/GATEWAY/PACKARD system Win 7 ultimate is a pirated copy.
Get a legitimate updated operating system and see if you have the same issues.

1 more replies
Answer Match 51.66%

Hi--

I need some help installing a new ASUS gtx550 ti card for my Win7 system. I'm pretty knowledgeable about pc's so I'm guessing that there's some simple thing I've forgotten and maybe somebody can point me in the right direction.

After the old graphics card failed, I temporarily switched back to the integrated onboard graphics. Now I can't get the system to recognize the new 550 card. I installed the card in the proper slot and connected cables (the fan runs) but nothing displays on the monitor when I reboot (although Win7 comes up). I've tried going into the bios and resetting the graphics option. There are two choices (IGD and PEG). I've tried them both and neither seems to work with the new card. If I switch the monitor cable back to the integrated output, the display comes up fine.

So, does a dedicated graphics card always override the onboard setting or do I need to manually reset it in the bios? If so, which setting is correct for a dedicated card (IGD or PEG). I assume the IGD stands for Integrated Graphics Device, that is, the onboard graphics chip. Second, do I need to disable any graphics drivers or settings in Device Manager before I switch to the new card?

Thanks for any help.

A:Trouble installing ASUS gtx550 ti graphics card

Quote:
nothing displays on the monitor when I reboot (although Windows 7 comes up)


If you connect the cable to the card can you see the white text during boot and can you access and see the bios settings?

Based on what you say it seems you do. If that's the case there must be some driver issue preventing Win 7 from working with the new card. Remove the 550. Leave the cable plugged on the mobo (so that you are using the IGD) and uninstall all that came with the old card, if it was NVIDIA, have a run with driver sweeper (be sure to remove only display drivers).
Then turn off, place the 550, leave the cable where it is. Install the drivers for the 550. Turn off again, and place the cable on the card (and the bios option to use that card), and you should be ready to go.

3 more replies
Answer Match 49.14%

hi, I am going to upgrade my graphic card to ATI 5770 so I need a new power supply which has power about 550--600 watt. But the most frustrating problem is that I failed to find a proper power supply with the correct dimension.
I have an HP pavilion e9300 which uses a very wired power supply tower-150mm(W) 86(H) 140(D). But so far all the PSUs I found is the standard size --150mm(W) 86(H) 150(D) which cannot fit in my setup.

So could any PC God give me some suggestion, please??
Is any PSU with the size of my tower or can I just simply install a bigger PSU which can still successfully power up the comptuer?

Thx in adance.
 

A:Power supply bigger than the tower - frustrated by HP PSU tower

If the power supply will physically fit your case, it should work fine with your computer. Will the extra 10mm interfere internally with anything inside the PC?
 

4 more replies
Answer Match 48.3%

I need to retrieve some old info from my old tower. Is it possible to hook the old tower to the new one and use it as a big memory bank? And if so, how do I do it?
 

A:Hooking old tower to new tower to retrieve old programs

This TCP/IP Home Networking and File Sharing Tutorial should get you started.
 

2 more replies
Answer Match 46.62%

Forgot to ask this in my last thread. Is there any difference between a mid-tower ATX case and a full-tower other than height? Thanks.
 

A:Mid-Tower and Full-Tower Cases

6 more replies
Answer Match 42%

Hi I am looking at these two laptops. Currently at home I have vodafone mobile broadband. I read that these 2 laptop are not compatible with mobile broadband for whatever reason. Is this true? and if this isnt true I have my mobile broadband installed on another laptop, I am guessing it is okay to install on 2 systems, thanks a lot in advance
 

A:Dell mini 10/mini 10 v compatible with mobile broadband?

9 more replies
Answer Match 39.9%

I have an iMac ALU 8,1 from 2007
20 Inch, 2.66 Ghz, 2 GB ram, ATI HD 2600 XT, 640 GB Sata 7200 rpm

And my problem is that I am about to buy a cable to connect a secondary monitor, and I do not know wich one I need.
I don't know wich port I have and I can't really tell the difference.
I searched the net a bit but couldn't seem to find this info.

I looked at the tech specs of the new iMacs on apple.com and they have Mini DisplayPort, but that's the new revision.
What about mine and how do I tell the difference?

Also, where can I get theese kind of cables really cheap? b/c it's freakin expensive from apple.
 

A:Solved: Mini DVI and Mini DisplayPort ????

8 more replies
Answer Match 39.48%

Opera Browser customer service number, +1-844-331-5444  Opera Browser customer service Opera Browser customer care telephone number +1-844-331-5444 Opera Browser customer care telephone +1-844-331-5444  Opera Browser customer care phone number  +1-844-331-5444 Opera Browser customer care phone Opera Browser customer care number  +1-844-331-5444 Opera Browser customer care opera technical support telephone number opera +1-844-331-5444 technical support phone number opera technical support phone opera +1-844-331-5444 technical support number opera technical support +1-844-331-5444  helpline number opera technical support +1-844-331-5444  opera technical problems helpline telephone number opera technical problems helpline telephone opera technical problems +1-844-331-5444  helpline phone number +1-844-331-5444  opera technical problems helpline phone opera technical problems helpline number +1-844-331-5444  opera technical issues helpline telephone number +1-844-331-5444  opera technical issues helpline telephone opera technical issues helpline phone number +1-844-331-5444 opera technical issues helpline phone opera technical issues helpline +1-844-331-5444  number opera tech support telephone +1-844-331-5444 number opera tech support telephone opera tech support phone number opera tech support phone +1-844-331-5444 opera tech support number opera tech support helpline telephone number opera tech support helpline +1-844-331-... Read more

More replies
Answer Match 34.44%

Hi

I need some info from my old HD. This 'puter was running WIN ME.
I have memory problems that will not allow this to boot or even POST

http://forums.techguy.org/showthread.php?p=2674998#post2674998
My new 'puter is runing XP Home.

I would like to put the old HD into my new machine.
Is this asking for big trouble or should this be ok?

thanks
bm
 

A:old HD new tower

here's the thing...it depends. if you installed xp on fat32 then yes you can install your old ME HD as a slave and be able to read it...however if you installed xp in NTFS then you'r just plain outta luck. you can't read fat32 with ntfs
 

2 more replies
Answer Match 34.44%

Alright, I have this game named Sim Tower, which is a tad bit slow (but shouldnt be). I can manage to install it fine, and even play it off the CD quite well if I wanted to. Although when I start the game, it automatically goes into fast mode (which means time is fast forwarded until there is activity with the people in the game). It hasnt got too much to do with fast mode, but this is when it effects the game speed a lot (mainly the cursor though). I take fast mode off, and then the cursor drags all over the screen, making it nearly impossible to play. At most last time I got to put in some office floors, but Alt F4 Seemed like the best option after that. I have tried running it in compatability mode, and even with this kinda of patch. Any suggestions on how to stop my cursor from slowing down?
 

More replies
Answer Match 34.44%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz, x86 Family 6 Model 15 Stepping 6
Processor Count: 2
RAM: 3325 Mb
Graphics Card: NVIDIA GeForce 210, 1024 Mb
Hard Drives: C: Total - 51207 MB, Free - 26164 MB; D: Total - 49999 MB, Free - 36638 MB; E: Total - 49999 MB, Free - 37234 MB; F: Total - 49999 MB, Free - 36244 MB; G: Total - 99998 MB, Free - 34265 MB; H: Total - 163409 MB, Free - 124843 MB; J: Total - 12300 MB, Free - 8220 MB;
Motherboard: Intel Corporation, D945GCF
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: EnabledClick to expand...

As shown above I have an older tower that I have modestly upgraded with a SATA DVD drive, more RAM and a better video card. I was wondering if my system is compatible to a SSD drive and if it is, how much would it improve performance. Also, would I be able to clone my current SATA drive to it?
 

A:New SSD for old tower?

Well there are three issues I see;
1 Your mb only has sata 2 ports and that will limit or throttle the speed of a modern ssd. It will still be a HUGE improvement over a mech hard disk however you will be somewhat limited.
2 Next issue is that xp [your os] does not support TRIM or wear leveling for the ssd. This causes a degrading of performance over time. Sometimes the drive mfg has a utility that will do basically the same thing. Another option is to make an image of the ssd and store the image on a second hd, external, etc. Once the image is made, boot with parted magic linux and secure erase the ssd. Once the ssd is secure erased, restore the image. This will also restore the ssd drive's speed.
3 XP does not apply the correct partition offset for a ssd. This can be edited manually using linux OR you can create the partitions with a win7/win8 boot disk then install xp.

Other than the above issues, you can install a ssd drive and you will see a significant improvement in performance however not as much as with a modern mb supporting sata3.
 

14 more replies
Answer Match 34.44%

Hello there, the tower on my Windows Xp will not come on. It's plugged in, I swear, the monitor will come on just not the tower. Please give me some good advice.

Thank you much,
Elizabeth
 

A:Tower won't come on, ack!

7 more replies
Answer Match 34.44%

Im looking to buy a tower to replace my old one. Can anyone give me a link for the best tower with os already on it for around 200-300$.I know that not much but im a broke dude I would like to find at least a 2ghz .
 

A:What tower should i buy?

Dell outlet would be a good place to start. Personally, I would save up a little more and wait for a good deal at Dell.

This is an example of what they have:

System Price : $269.00

Operating System Genuine Windows XP Home
Memory 512 MB DDR NON-ECC SDRAM 400MHz (2 DIMMs)
Hard Disk Drive 40 GB EIDE Hard Drive (7200 RPM)
Modem 56Kbps Data/Fax Modem
Base Dimension 3000 Desktop: Intel Pentium 4 Processor (2.80GHz, 533 FSB)
Media Bay 48X Max Variable CD ROM Drive
 

18 more replies
Answer Match 34.44%

So I recently got a used tower from a buddy of mine for free, he told me that there was a virus and needed to be cleaned, I thought i could install a windows 7 operating system since this was a windows vista and fix it, however when i try to run the installation i get a yellow screen and the computer either freezes or crashes before the start up, I was thinking of getting a new hard drive for it. I also tried running it on safe mode and tried to get to command prompt to type in rstriu.exe to be able to restore it, but it seems to keep crashing before i can get past the starting screen. its an hp pavilion media center m8300f pc with an amd athlon 64 x2 dual core processor 6000+, 3072mb system memory, 640gb hard drive an nvidia gefore 6150se graphics and running windows vista home premium, I was thinking of keeping the tower and buying a new processor, hard drive and graphic card if needed, but i feel like if i change the hard drive it will help, i dont know what to do at this point, can anybody help?
 

A:Need Serious Help With my Tower

8 more replies
Answer Match 34.44%

hi guys I am trying to connect my pc tower to tv using s video cable.I have A VIDEO CARD raddeon x300 with s video dvi and vga,TOWER IS A SR5010NX COMPAQ PRESARIO..I need help on connecting this tower to an hitachi53 inch projection screen tv.I get a picture black and white. moving screen.. I am using french version of windows vista basic for some reason when i got the pc formated they added vista and in french.can someone please help.THANKS
By the way I LIKE TO THANK THIS FORUM AND THE PEOPLE WHO HELPED ME WITH THE ISSUE I HAD WITH DVD DRIVE. THANKS GUYS

More replies
Answer Match 34.44%

I had to buy a new computer.

A couple months ago I was using an Emachine desktop computer. I know Emachines aren't anywhere near being "the ****," but when you come from a not so financially stable family, you are not greedy.

Anyway.. the computer worked for the longest time and I had a separate tower as well. The separate tower had Adobe Photoshop on it and that is a program I love to play around in and so I would just take the chord from the back of my Emachines tower that led to the monitor, and I would plug it into the older tower without powering down or anything. (Obviously my first mistake but I didnt knw that at the time).

So I kept doing this and then one day I went to plug the chord back from the old tower to the Emachines tower and nothing happened. It was like the Emachines tower was sending no signal to the monitor anymore. I tried different monitors and none of them worked, there's something wrong with the tower now.

Maybe the video card?
I am computer illiterate to the core so alot of abbreviations tend to stump me.
If someone could help I would highly appreciate it.

Being a recent graduate from high school, I have pictures on that Emachine tower that I do not want to part with.
 

A:Old Tower

15 more replies
Answer Match 34.44%

hey all!,

I have recently bought a 200gb seagate sata harddrive to go with my current 250gb sata harddrive and i think i've made a right mess of things.

I installed it fine and everything (computer read that is was there etc), only i tried to move my files from one hard to another and im sure as you can imagine its all gone pete tong.

What i was trying to do or aiming to achieve to have one hard drive purely for the OS and the program files that i use and the other for all other filetypes such as documents, music and videos etc.

I have managed to recover some of my data but all of my music (a good 40gbs worth) and 80gbs worth in guitar + drum training/teaching movies etc etc.

Is what i'm attempting to do possible on windows xp? if so, how do i do it safely so i don't screw anything else up LOL

Many thanks in advance

Mikeyprs
 

A:Two HD's in One tower

15 more replies
Answer Match 34.44%

A little bit ago my son had some problems and I got help here. http://www.bleepingcomputer.com/forums/t/75413/son-caught-something/Now Why I'm here. I purchased a new tower (rather my hubby did :-) ) I want to make sure there is no problem resulting from what my son had (See topic above). Also I notice my computer restart at least once after starting up. No errors or anything it just restarts and closes all windows. Not sure if this is virus related but I'm hoping you can help resolve this issue.I run trend Micro Pc-cillin all updates, I ran scans nothing found. I also tried trendmicro but it keeps getting stuck in idle just before done.Windows XP Digital Media ManagerEmachines T5212Soft pack 2All critical updates done.cpu 2.66ghz896 mb ramOk here is my Hijack log file Logfile of HijackThis v1.99.1Scan saved at 2:42:40 PM, on 12/28/2006Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\SYSTEM32\SVCHOST.EXEC:\WINDOWS\SYSTEM32\SPOOLSV.EXEC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\ehome\ehtray.exeC:\Program Files\Digital Media Reader\readericon45G.exeC:\WINDOWS\RTHDCPL.EXEC:\WINDOWS\zHotkey.exeC:\Program Files\Java\jre1.5.0_09\bin\jusched.exeC:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb03.exeC:\Program ... Read more

A:New Tower Restarting

Log looks fine - Explain the restarting in greater detail - how old is this towerDo this to verify all is OKDownload Superantispywarehttp://www.superantispyware.com/superantis...efreevspro.html Install it and double-click the icon on your desktop to run it.? It will ask if you want to update the program definitions, click Yes.? Under Configuration and Preferences, click the Preferences button.? Click the Scanning Control tab.? Under Scanner Options make sure the following are checked:o Close browsers before scanningo Scan for tracking cookieso Terminate memory threats before quarantining.o Please leave the others unchecked.o Click the Close button to leave the control center screen.? On the main screen, under Scan for Harmful Software click Scan your computer.? On the left check C:\Fixed Drive.? On the right, under Complete Scan, choose Perform Complete Scan.? Click Next to start the scan. Please be patient while it scans your computer.? After the scan is complete a summary box will appear. Click OK.? Make sure everything in the white box has a check next to it, then click Next.? It will quarantine what it found and if it asks if you want to reboot, click Yes.? To retrieve the removal information for me please do the following:o After reboot, double-click the SUPERAntispyware icon on your desktop.o Click Preferences. Click the Statistics/Logs tab.o Under Scanner Logs, double-click SUPERAntiSpyware Scan Log.o It will open in your default text editor (such as Notepad/Wordp... Read more

6 more replies
Answer Match 34.44%

I am purchasing a new Intel Core 2 Quad Processor system. I wish to keep and use my old Dell Dimension 8200 tower with extra hard drives, optical drives and 1.44 floppy drive for storage and whatever. My new machine has Windows Vista Home Premium. The old machine has Windows XP SE2. My home network has three computers wireless and wired.

Where can I learn how to set up and utilize this older tower on my home network? Do I need to leave a full operating system on it? What else do I need to know to make this work efficiently?

'I am guessing the old tower would be a "server." I'm a neophyte when it comes to these matters. All help including the very basics would be much appreciated.
 

A:Old tower use question

11 more replies
Answer Match 34.44%

Hmm, hey guys, I'm looking for a new case to replace my current raggidy, ugly, overall horrible looking case.

Want to help me in this adventure of mines?

Here's what I would like:
-Black case
-Mid Tower
-Comes with 1 or 2 120mm fans
-Power supply is optional
-Something durable yet not soo heavy that I cant even pick up.

thanks
 

A:Looking for a Mid Tower Case..

16 more replies
Answer Match 34.44%

I was fixing someone's computer. (Win XP). All of a sudden this computer crashed. While I wasn't there. This person called Gateway (the maker of their computer). They said it was most likely a short in the tower. Does anyone know of symptoms the computer would be experiencing if this was a short in the tower. (Before the actual crash, her computer was giving the same error message and it had been happening for over a year now). Thanks.
 

A:Short in tower?

15 more replies
Answer Match 34.44%

I have a Dell 17"" LCD TV/Monitor. The only way I've found to have the sound play through the computer's sound system is to run a line from the earphone jack on on LCD to a "hole" on the tower. Actually did that once upon a time. However, when moving everything to a new desk, we unplugged ALL the cables, lines, whathaveyou. Now, no one can find the bloody slot, hole, or whatever it is that the line from the earphone jack is to go into. Please be rather explicit as I'm in a wheelchair, and thanks to my new set up I can't actually see the back of the tower. My helpers are able to do so, but don't have a clue as to what anything is on the back. Thanks much, Jack My system: Windows XP. Dell 2300.
 

More replies
Answer Match 34.44%

Okay, I'm totally new to this site, as in I just registered moments ago. I'm not entirely certain if this is the right forum for this, if it's not, please feel free to direct me to the correct forum for it.

I am currently on my boyfriend's computer, which is right beside mine. About an hour ago my tower started beeping continuously. I had no idea why and just figured I should shut it down to be safe, as I was on my way to the store at the time. When I returned from the store, my computer would not boot back up. It gets to the windows screen, but never goes past there. Also, the tower no longer beeps, and hasn't since I tried rebooting it earlier.

I googled for some answers, and discovered that there is such a thing as beep codes. Which would be great, and probably help me solve the problem, or at least know what the hell the problem is....if I had known about them sooner and was bright enough to count the beeps. So now I am totally at a loss, does anyone know what I could do to try and figure out what is wrong with it?

If all else fails, I'll have to take it to a tech I guess, which I really don't want to do.

Any feedback would be nice, thanks.
 

A:Tower beeping?

If it beeped, then it is almost certainly a hardware thing. This could be due to loose memory (this happened to me before), a loose PCI/AGP card, or a more serious hardware (motherboard) failure. I'd make sure your connections are nice and tight. Also watch if the fans are working.
 

2 more replies
Answer Match 34.44%

About 6 months ago, i was moving furniture around in my room and whilst moving, my tower fell over and hit my carpet, and the case cracked. Ive been using my older tower for quite some time now. Ive deleted all viruses, spyware, addware...still didnt help. anyways to the point..I tried to hook up my other tower, which is alot better, but whenever i hook it up and turn it on, i get no reaction from the monitor. Ive tried unplugging and replugging it, and the dell symbol shows up on my monitor but then my monitor goes blank. Ive tried hitting f8 many times, but nothing comes up. Can anyone help me? Ive also opened my tower, cleared any dust, and all parts are connected as they should be.
 

More replies
Answer Match 34.44%

Do I need repair?
The tower case gets hot enough to make you "OUCH" when touched
 

A:Solved: Tower: how hot is too hot?

16 more replies
Answer Match 34.44%

This may sound strange but. I pulled an old tower out of my closet to see if it works. It kinda does. When I turn it on the fans go and the lights to but it dosent turn on on. It's like its in a standby. But yesterday I was messing with it and I went to move it (it was still on) and I heard a click, the fans slowed down, and the computer fully turned on. I am at my limit here. What do I do!?
 

A:My tower isn't working

11 more replies
Answer Match 34.44%

Hello,
Was looking for advice on running two monitors/Screens in separate rooms off of one tower..
Should I try to get two video cards, or is there a successful way to have a Split like VGA cable to run to two separate rooms, from one tower/video card?
THANKS IN ADVANCE!!!
 

A:Two Monitors, from One Tower

11 more replies
Answer Match 34.44%

When I bought my new cmputer, I didn't transfer my photoshop 7 stuff, now can I hook up my old tower to my new computer, download the PS 7 stuff on to a CD, then upload info onto the hard drive of my new computer? I'm new at this, so if this is a real stupid question, just say so.
 

A:question re tower

You can move any files PS created, but to use the program, it will have to be installed on the new pc.

wrs
 

1 more replies
Answer Match 34.44%

I don't know if this is the right forum for it but...

I was wondering if there is any problem with placing a subwoofer on top of my PC? It's a pretty small sub and doesn't vibrate so much but I was just wondering if anyone knows of any problems with this?
 

A:Subwoofer on top of tower pc?

16 more replies
Answer Match 34.44%

I just purchased a new PC tower. I stayed with Windows 7 because didn't like the way 10 functioned. The tower is thin. The one feature I don't like is the DVD drawer is vertical. Can I lay it on its side if I put legs on the tower to allow for the circulation for the cooling fan? I have a couple of older grandchildren (H.S. & College) that come to the house and use the computer. I know that they are careful, but I have a concern about their use of the DVD/CD drawer.
mthumjdo
 

A:Can I lay tower down on its side

7 more replies
Answer Match 34.44%

Hi there, Not sure if this is the right forum for this question......

But basically i wanna upgrade my desktop PC. I don't need Monitor, keyboard, printer etc i just wanna buy a new Tower and plug it straight in.

Now does anyone know of any good websites i could look at, prefably in the UK as thats where i live.

Also just a bit of advise regarding 32 bit & 64 bit, what exactly does this mean and where on the PC spec is it shown?

Many Thanks
 

A:New Destop Tower

16 more replies
Answer Match 34.44%

I have just had a phone call from me girlfriend. Her pc tower is not turning on when she presses the ON button on the front of the pc. She has unplugged all units, inc printer, monitor and scanner. Then plugged them back in, the tower is the only thing that is still not working. Now the printer is not working either.

Any help would be appreciated thanks
 

A:Problems with the pc tower

8 more replies
Answer Match 34.44%

Hi for the past few days I have been hearing sounds coming from my tower. I just had it cleaned about 2 months ago, so I don't think it is could be dust built up on the fan. It sounds like it is trying to load a disk, but there isn't on in the slot where you put one. Any help would be great.

Thank you,
dlkseedig
 

A:Tower sounds

Describe the sound better. Is it a clicking? A beep? A drives clicking sounds bad.
 

1 more replies
Answer Match 34.44%

I almost had my tower catch fire because the power supply fan stopped. The cputhermometer software wouldn?t shut it down because the cpu operates at only 40c but the mother board and the other wiring was melting. By the time the cpu would be effected by the ambient temperature it would be too late. I am trying to find a method of sensing an overheating problem which would be an independent stand alone system. Even though my system has fans everywhere and is dust free I still want it to be safe from setting its self on fire when I?m away.
Would someone please know of a solution.

A:tower melt down

This is some interesting reading
It's a pdf document
www.freeweb.hu/t-t/elokep/pic/download/tb067a.pdf

1 more replies
Answer Match 34.44%

Hello, i just bought an hp z240 workstation (tower format).I'm trying to configure a transcend m.2 30GB drive. After installing it on the dedicate m.2 slot on the motherboard i can't see it in the bios and even in windows 7.the first drive is connected on sata0 (original 1tb hdd with win 7 installed on it)On bios settings the m.2 slot is enabled. any suggestion? Thank you

More replies
Answer Match 34.44%

i have a 3yr old desktop hp pc with 512mb of mem. recently added. motherboard is a trigem have celeron processer (2.70ghz)

i have two fans inside case first one is cpu fan the other fan is inclose inside its own case inside the pc tower and blows hot air outside the pc. through the back below that is a vent

the sides of pc tower have vents but are small. the pc tower is sitting on two sm. bricks that allow air to flow underneath it

i have the pc tower in a desk cabinet with the door on the front that can be open which i have open when pc is on.

the back of the cabinet is open so air can escape and so i can hook up wires to pc i also have made sm. vents in both sides of desk cabinet to allow for cross ventlation.

thus my problem i still notice a humming from pc at times
when visiting gaming sites not the poker sites but sites like teagames.com mousebreaker.com etc. i usually download sm size games (under 1mb) but don't play them everyday

what i notice is when i do play these games after a while i notice pc get noiser and right side of tower gets a little warm to the touch

leaving site pc quiets down and tower cools off but i still notice faint humming noise coming from pc almost have to put ear to tower to hear it.

any ideas or thoughs on a possible solution would be big help
 

A:pc tower humming

14 more replies
Answer Match 34.44%

I'm hearin' a new song in my case... It's a Dell Dim 2400, 4 y/o, P4, to which I've just added two HD's, and two [in-spec] ramsticks.

No operational problems; just the buzz/hum sound. It's not rhythmic, or regular. Does it when idling, or photo editing.

And nothing shows in tasman... I'm thinkin' it's my original HD, although it does NOT make the same sound as a HD that's busy - like defragin', or a crash from an app that's wrong. Just a buzz, or hum.

Any ideas?

Thanks
 

A:buzz/hum in tower...

12 more replies
Answer Match 34.44%

I'm posting this in here because this forum has the most people viewing it right now, and no one replied to it in the general hardware forum I originally posted it on.

I am currently on my boyfriend's computer, which is right beside mine. About an hour ago my tower started beeping continuously. I had no idea why and just figured I should shut it down to be safe, as I was on my way to the store at the time. When I returned from the store, my computer would not boot back up. It gets to the windows screen, but never goes past there. Also, the tower no longer beeps, and hasn't since I tried rebooting it earlier.

I googled for some answers, and discovered that there is such a thing as beep codes. Which would be great, and probably help me solve the problem, or at least know what the hell the problem is....if I had known about them sooner and was bright enough to count the beeps. So now I am totally at a loss, does anyone know what I could do to try and figure out what is wrong with it?

If all else fails, I'll have to take it to a tech I guess, which I really don't want to do.

Any feedback would be nice, thanks.
 

A:Tower beeping?

Design ,It would be helpful to fill in your profile on your Hardware .In this case the Motherboard ,brand and model #.
You will get a lot more help that way.
Beep codes differ and are specific to the company that wrote the bios. Also they will have a different pattern for each type of error.this is a repeating pattern of long and/or short beeps.
However these occur at initial boot time .
Since your computer has re-booted up to Windows almost ,you should look in your event viewer for errors.
Try to boot windows into Safe mode.
 

1 more replies
Answer Match 34.44%

I just got back from being out of town; went to check my email and my computer won't turn on. Everything else is getting power just fine: printer, scanner, router, modem, keyboard, screen. The light won't even come on on the tower. I have: unplugged and replugged from tower and the wall; tried a different and known-to-work power cord; used the toggle on the back of the tower to turn on and off; held the on button in for 5-10 seconds; opened up the case and made sure everything inside is seated firmly.

Any thoughts? I'm a pretty basic user but can follow directions!

Thanks.
 

A:no power to tower!

7 more replies
Answer Match 34.44%

Hey guys,

i was wondering if anyone knew or could recommend a tower, full would be nice, that has the space for 3 hard drives; but with generous space for hdd coolers to be mounted on each.

Currently have a midi tower, micro atx with 3 hdd but they are literally bunked together and no fan at all can be fitted between them. this is quite unstable i would imagine. Temps are around 45c; when i had one it was about 21c. so i just need a case that would accomidate for 3 hard drives that allows space, about at least an inch between. also be nice if the case had memory card reader built in with a nice design. price doesn't really matter.

cheers!
 

A:Full tower 3 hdd

12 more replies
Answer Match 34.44%

solved
 

A:Optiplex GX1 Tower

Jonathon,

You need to use Thread Tools in the ORIGINAL Post to flag you Q as solved. Creating an unrelated new Post is a compounded problem.
 

1 more replies
Answer Match 34.44%

Hi
  I  would like to purchase a secondhand tower Desktop PC, which seems a bargain,
 
but the seller has confused me as i have asked if it is a genuine installed Windows 7 Professional edition which
 
is all i would like to purchase, A genuine  Windows 7 professional installed on a Desktop,
 
the seller has explained in email   "I only have a copy of the disk but  it's a real copy with a legal code"
 
Would this be genuine ?
 
I would be grateful for some advice please.
Ben
 
 

A:Secondand Tower

"I only have a copy of the disk but it's a real copy with a legal code" should set off red flags.The copy would be "real" (it certainly would not an unreal copy) but it is still copy. You don't know if he has given anyone else the same copy with the same license.

4 more replies
Answer Match 34.44%

I thought I had started a "help!" thread on this subject earlier today, but can't find it. Must have had a "senior moment" and not licked the submit button!
Here is my problem:
I see a tutorial on the HP site that explains how to add a PATA to my new machine (Adding or Replacing a Hard Drive HP Pavilion p6347c Desktop PC - HP technical support (Ireland - English)), but it remains a mystery to me how to match any of my connectors to the old drive. I see no parallel cable anywhere! And if I need to go and buy one, where the hell is the connection on the motherboard? The tutorial assumes I know all this, but if I did, I wouldn't need the tutorial.

A:installing IDE in new tower.

Look for a blue connector next to the 24pin power connector. I can see it in the manual
http://h10032.www1.hp.com/ctg/Manual/c01859455.pdf

9 more replies
Answer Match 34.44%

I want to know if i can add another tower to my current computer, i just want to add a tower and no monitor. In this tower i want to just put a CD RW drive and whatever it takes to run that drive (if anything is needed). also i might like to put another hard drive and other drives like a DVD ROM. if possible i might like to add more RAM (if i can use this for the computer that has the monitor attached to it.)

can i do any of this?

thanks for your help.
 

A:help with adding another tower...

7 more replies
Answer Match 34.44%

well- at least i think it is. lately there has been a wierd burning smell coming from my tower. i've been shutting it down when i smell it, but i was wondering if anyone had any idea what it is and what i can do about it. i think the fan may be broken. is this the beginning of the end for my little puter?
 

A:Help! My tower is burning!

7 more replies
Answer Match 34.44%

Hi

I bought the Lego Robotics System some years ago and since some months I use it again with Java + Eclipse + Lejos but the problem is since I have W7 the USB Tower doesn't work because I only have Drivers for XP.

Do you have any idear how I can get it to work on W7?

Thanks for help!
Greetings
Julian

A:Lego USB Tower

try finding vista drivers they might work better

9 more replies
Answer Match 34.44%

hi, i have a Hp pavallion a600n, and once in a while it crashes, and when ir estart it jams up on the hp startup screen, then i restart it again and it will start up normally, i run malwarebytes antimalware from time to time to clean it out, any other suggestion on what i can do to make sure the system is clean please?

A:My Hp tower crashes sometimes?

Hello,lets get some logs and see what we have.Please download MiniToolBox, save it to your desktop and run it. Checkmark the following checkboxes: Flush DNS Report IE Proxy Settings Reset IE Proxy Settings Report FF Proxy Settings Reset FF Proxy Settings List content of Hosts List IP configuration List Winsock Entries List last 10 Event Viewer log List Installed Programs List Users, Partitions and Memory size. List Minidump FilesClick Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run. Note: When using "Reset FF Proxy Settings" option Firefox should be closed.Reboot into Safe Mode with Networking How to enter safe mode(XP/Vista)Using the F8 MethodRestart your computer. When the machine first starts again it will generally list some equipment that is installed in your machine, amount of memory, hard drives installed etc. At this point you should gently tap the F8 key repeatedly until you are presented with a Windows XP Advanced Options menu. Select the option for Safe Mode with Networking using the arrow keys. Then press enter on your keyboard to boot into Safe Mode. >>>> Download this file and doubleclick on it to run it. Allow the information to be merged with the registry.RKill....Download and Run RKillPlease download RKill by Grinler from one of the 4 links below and save it to your desktop.

Link 1
Link 2
Link 3
Link 4

Before we begin, you should disable your anti-malware softwares y... Read more

10 more replies