Tech Problem Aggregator

Connecting a SATA Hard Drive in an SCSI system

Q: Connecting a SATA Hard Drive in an SCSI system

Hello, this is my first post here. I have an HP Workstation x4000 I use at work for Designing CAD Models. This is an old computer. My problem is that I am out of room on the Hard Drive. It is a 58 GB SCSI,68pin HP Hard Drive. My IT support guy purchased me a 1GB SATA Drive,Raid Card,enough Memory to fill the MEC Card, and Norton Ghost to flash over the new Drive. My problem is, the Card he bought will not fit into the Mobo. The ribbon in the Computer has an empty plug and a power plug,but they are for a 68 pin SCSI Hard Drive. Is there a cable made that I can use to simply plug the SATA Hard drive into the 68 pin ribbon,or do I need a card? Do they make such a thing? My boss is extremely frugal and doesn't want to hear that the best thing would be to replace the 12 year old computer! Thanks for any help you guys can give me

More replies
Answer Match 88.2%

hi my new sata hard drive is showing as a scsi in win7
and it seems to be running slow and making alot of accessing data noises
how can i fix this back to sata
thanks

A:new sata hard drive showing as scsi in win 7 help

With some hard disk controllers it is normal for it to show up as a SCSI disk - particularly if the disk controller is running in AHCI mode, which is preferrable since it allows features such as NCQ. One thing you may want to check is: locate the drive itself under "Disk Drives" in device manager and go into the properties. Select the "Policies" tab and view what is set. For better performance you will want it set to "Better Performance" with both of the boxes checked. Though if you lose power you may run into minor file corruption issues - I personally have not had issues with this. If you disable those check-boxes performance can decrease significantly.
 
-David Betournay

1 more replies
Answer Match 87.36%

I have a Dell Tower Computer (Circa 2000-2002) that runs RIP software (Raster Image Processor) used to send graphics/image data to a machine that makes by way of laser imaging our plates or masters for our offset printing presses. Monday the hard drive failed. The Dell has Windows XP license decals on it but when booting up it display Windows 2000 NT. The computer has only 1 hard drive, a 68 pin SCSI drive and the cable to it connects to separate dual channel SCSI card which is in a slot on the motherboard. There is another SCSI card (single channel) in the slot next to it which has a cable that goes to the machine that this computer drives. The software that runs on this computer is proprietary software and I have a re-install disk for it being send via UPS Next Day Air as I type. I have an XP disk & license that I can install on what ever hard drive I can get to work here and the RIP software manufacturer said their software would work on XP. But I don't have a copy of Windows 2000 NT.

My question is that if I can't find this same hard drive locally, can I use an IDE or a SATA hard drive instead and still run the RIP software correctly? There is 2 IDE (primary & secondary) connectors directly on the motherboard. One is used for the CD rom drive, the other is unused. I am not certain but I don't believe the motherboard has a SATA connection. I have 2 good spare IDE hard drives.

If I can't make plates I can't print so I need to get this reso... Read more

A:SCSI hard drive died - can i switch to ide or sata?

8 more replies
Answer Match 87.36%

SCSI vs SATA vs EIDE
What are the differences between all of these?

I'll probably not use SCSI, but I was looking at the WD raptor 10K rpm hard drive (SATA). Do you need a special motherboard or certain controller to run this hard drive? And do you need a special CABLE for it? I have tons of 80pin IDE cables, but those wouldn't work?

Thanks
 

A:HARD DRIVE question - SCSI vs SATA vs EIDE

Nope won't work. Different drives, cables, controllers. Some motherboards now come with the SATA interface built in. For more information check this site out. Its an OLD report on SATAs. Hard drives are now available for SATA use.

http://www.explosivelabs.com/articles/sata/
 

2 more replies
Answer Match 87.36%

Hello All,

I just got my hands on a Compaq 36.4 gb hard drive (10k RPM). It has an scsi port connector but I don't know how to connect it to my ECS board which is fairly new (one of those SLI-status boards). I might need a converter of some sort. The hard drive model is: BD0366459B , my board model is ECS 945-p ( http://www.digit-life.com/articles2/mainboard/ecs-945p-a-i945p.html ) .

Thanks ahead of time.
 

A:Hard Drive Compatibility?:confused: SCSI to IDE or SATA?

According to this site
Product Name BD0366459B
CD-ROM Drive Compaq CRD-8402B
Hard Disk Drive Compaq BD0366459B; 9.09 GB; Firmware 3B12; Wide Ultra3SCSI
BD0366459B; 145. GB; 291. GB; Firmware B005; Wide Ultra3SCSI
Host Bus Adapter Compaq Integrated Dual-Channel Wide-Ultra SCSI-3 ControllerClick to expand...

You need

(1) a SCSI-3 controller to be installed into the mobo
(2) a Wide Ultra3SCSI cable

You may get the hard disk cheap but could get rip off by the hardware needed to go with SCSI equipment.

The Sata can be viewed as a poor man's SCSI but at least your mobo support 4 units out of the box. I doubt if a SCSI can be cheaper than Sata nowadays which is being retailed at GBP 0.128 per Gb. Thus the 36.4Gb unit would cost no more than GBP 4.65 in UK which, if being a Sata disk, is equivalent to approximately one imperial gallon of petrol. That amount of money will not be able to buy either one the above two attachments required to run the unit.

Technically if you run a Sata Raid 0 to half the access time it should beat the SCSI disk performance hand down, I would have thought.
 

1 more replies
Answer Match 86.94%

Ok I have a external enclosure that is IDE / Sata , I have 2 hard drives I'm not using , there both SCSI 10,000 rpm Hard Drives, my question is how can I connect one of them to my external enclosure so I can connect em to my USB

A:Connecting SCSI Hard Drive to my external enclsoure?

You cannot do that. Your drive which is SCSI will not connect to an IDE/SATA controller in the external hard drive enclosure.

4 more replies
Answer Match 80.64%

I purchased a Dell Inspiron 531S desktop and wanted to move my IDE 200 MB HDD from mo old PC to the Dell.

We tried connecting the IDE HDD as an external drive but the Dell would only recognize the case and not the HDD.

The TechSpot Q & A have saved me in the past so I hope someone can give me a solution
 

A:Connecting IDE Hard Drive to SATA PC

It dosen't have any IDE connections at all? You could always try a PCI card that will allow you to use IDE drives, however be warned that it would only be like ATA66.
 

3 more replies
Answer Match 78.12%

HI there, i'm having trouble with a new hard drive i bought, it's a seagate 80gb sata, my motherboard only accepts ide connectors so i bought a controller card with sata ports connected one cable (bought seperately) to the hard drive and another through a convertor to the power. When i start up windows it recognises the raid controller, that in turn recognises the hard drive but it seems to be under a seperate interface, the normal bios does not recognise the hard drive as slave or master or at all for that matter! Have i connected it wrong or is there something i'm missing? Thanks in advance for any help!
 

A:Problem connecting Sata hard drive via controller card

7 more replies
Answer Match 76.02%

windows98 is already on my 13gb ide drive, but i have a new 9gb scsi drive which is really fast 80mb/sec,
I would like to install only windows for now so machine boots faster, can i do this and still have other files on existing slower 13gb hdd i.e. games, txt files and pics?
I have managed to make ide drive as slave but i dont know how to go abouts installing win98 on scsi, as machine keeps booting to windows, from the slave drive. And when i attempt to install win98 it tries to put it on the ide drive which alwready has it on.
Do i need to disconnect the power supply to the ide hdd?
Does scsi drives have master/slave jumper setting like the ide?

My new hdd is MAG3091LC on this page
www.fujitsu.co.jp/hypertext/hdd/drive/disk_e.html
 

A:if i have 1 ide and 1 scsi hard drive how do i install windows on the new scsi hd?

8 more replies
Answer Match 73.08%

I have a Startech brand PCI add-in card to get some extra SATA ports on my old Biostar MCP 6PB M2+ board.

In Disk Manager an Hitachi drive attached to the card shows up as a SCSI device.

However my backup software doesn't see it (old copy of Norton Ghost on CD) and the POST operations do not show it in the BIOS. Win7 reports that no driver updates are needed for the Hitachi on the Startech card.

It's very confusing. A new motherboard is due for me but this problem solved would extend the use of the Biostar. Why would the Win7 see the device but nothing else?

More replies
Answer Match 73.08%

I'm a little confused. In the course of trying to speed up my computer a little bit, I came across something interesting and puzzling. The rig is a Dell Dimension C521 with 2G ram and an AMD 64 X2 Dual Core 3800+ at 2GHz running windows Vista Business.

As you'll see below in the device manager, it tells me that I have a SCSI drive. Yet, when I take the case apart, it sure looks to me like SATA. It's got a SATA cable, etc. Unless they changed the SCSI cable, it has to be SATA. I remember SCSI cables as being fat ribbons from my Mac days (MacPlus, IIsi, PB160, etc.).

Am I going crazy, did I miss something, or is the computer going crazy.

Thanks for your sanity, Sam
 

A:Is this a SCSI drive or SATA?

find the model number of the drive on the drive unit and google for it. That might tell you if you have a scsi or sata drive.
 

2 more replies
Answer Match 72.24%

Hello,

Not sure whether to put this here or programming section seen as its more of a hardware issue. Anyway, I am currently designing some software which will be able to send SCSI defined multimedia commands MMC which are defined by SCSI.

I am going to be using a SATA connected Blu-ray/DVD drive. When MMC commands are sent using IOCTL the drive should return information held on an optical disc.

The question I have is are MMC, well SCSI commands compatible for use with a SATA interface? I am unsure whether the protocols are different or not. I'll be using windows xp.

Thanks!
 

More replies
Answer Match 72.24%

I have an HP desktop computer running WIndows 7. The motherboard has an nVidia chipset. I also have 2 standard SATA hard drives and a SATA SSD drive attached. When I bring up Device Manager, all of the drives are listed as SCSI drives. Anyone know if there are any driver updates that can fix this? I'm not really worried that they are mislabeled, but the SSD is not performing well, even after the typical tweaks. In fact, one of the tweak applications can't identify the drive mode. It should either be IDE or AHCI. In any case, NOT SCSI. My BIOS doesn't have any settings to change IDE/AHCI modes, so I have been told this needs to be done through software.

Any suggestions?

A:Why does my SATA drive show up as SCSI?

Maybe the driver for the controller determines what the OS sees.
all my drives list as ATA

2 more replies
Answer Match 71.4%

I have got a system that was running xp on a sata hard drive which was cloned onto a second sata hard drive. The main hard drive started freezing on the welcome screen and so I started using the second hard drive but the same has happened to that. I could not boot in safe mode or last known good configuration etc.
I decided to format the first hard drive and put xp back on it but every time I try to do so after it has been formatted and the xp files have been loaded onto the drive when it comes to reboot in order to load the files the computer will not load the files and just starts the whole process again of setting up windows and then giving me the option of formatting etc I am just going round in circles.

Is there something special that needs to be done with a sata hard drive in order to put xp on it?
Does anybody have any idea what the initial problem was with freezing screens?
 

More replies
Answer Match 71.4%

Hi there,

I am trying to install a Seagate 500GB SATA hard drive to my old DELL Dimension 4500.

I have previously installed PCI Controller Card from Masscool. I also installed and updated the driver on my old IDE hard drive.

I am not seeing an option in my BIOS to detect the hard drive.

When I get to Windows and open up My Computer it does not detect the drive but it does detect the SATA DVD drive I have installed to the controller. When I open the device manager it sees a hard drive connected but sees a SCSI drive.

Lastly when I open the program that I installed as a raid controller it does detect a SATA hard drive but it isn't allowing me to do anything with it.

Ultimately I would like to install this new hard drive and no longer use the old IDE one. I believe the next step is to access the RAID BIOS but I have no idea how. I would appreciate any help anyone could give me.

Thanks in advance,
Tom
 

A:Trying to install a SATA hard drive on an old system.

9 more replies
Answer Match 70.98%

My Win XP aro PC has two internal SATA drives. The OS is installed on drive C. Drive F is the other one, used for data

I was moving some files from drive C to Drive F and the machine crashed, giving me a delayed data write error. After that the F drive was not accessible. It either wouldn't open or I'd access denied errors.

I tried running chkdsk f:/f, which has always worked in such situations on external drives. It didn't work at first, giving me access denied errors, then I rebooted and I ran it - it didn't work the first time, I got unrecoverable sector errors.

Finally, after 3 attempts chkdsk seemed to work, but after that the Windows immediately froze. I shut it off and now it won't boot up. I get the windows splash screen then it just freezes on a blackened screen.

Please help!

A:SATA Hard Drive failure, system won't boot

I just ran the drive diagnostics from the setup screen - I get Drive I... Fail. Return Code: 7.

2 more replies
Answer Match 70.98%

I have just bought a new computer with no operating system.
AMD Athlon 64 with ASUS motherboard
200gig sata hardrive

I started an intsallation of a copy of XP professional but it asked for xp with service pack 2 which i don't have on that disc.
I reset the computer but now when i turn it on it comes up with the message 'Error loading operating system_'

I have bought a new and legal version of xp home with sp 2 but i can't get past this error message.

I think i have to somehow wipe the sata hard disc from bios but i don't know how to.

Can anyone help please

Thanks
Tim
 

A:How to wipe a sata hard drive without an ooerating system

2 ways you can do this...
1) Travel to bootdisk and DLoad a WinME bootdisk if you have web acess on another machine. Extract the zip to a floppy, then boot up in the new machine...
At the A: prompt type format C: and hit enter. This will prepare the drive for an OS When it is finished remove the floppy and re-boot with the XP CD in and you will now be able to run setup.
2) Determine who's SATA drive and go to the manuf. site and DLoad their HDD utility. This will also prepare the drive and you should be good to go.

patio.
 

2 more replies
Answer Match 70.98%

I was just looking around and I saw a thread that indicated that it might be possible to transfer a Windows XP Pro hard drive to a new system.

I'm wondering if this is true or not because at the moment I am looking at getting new Intel D865GSA Motherboard to replace the same type of motherboard because it failed on me. I was also looking at putting in a similar processor as well. The original motherboard was an Intel D865GSA and the Processor was an Intel P4 640 processor.

That was the original hardware that was in there when I installed Windows XP on the hard drive, but due to the age of the hardware people have told me that it would be better to just upgrade the motherboard, processor and memory. I've been looking at the idea of doing that with a barebones system and I could do that, but I would need to use the hard drive that Windows XP Pro is currently installed on without any loss of actual data.

It's important that I keep whatever data is on there due to a legal case that I'm dealing with, but I don't know what will happen if I try to upgrade things so that it has a newer motherboard, processor and memory that can support Windows Vista or higher.

What can I do to make sure that I can access this drive as is without any loss of data?. I don't mind doing device drivers at all as that won't affect the data, but reinstalling XP will cause it to lose the data and at the moment I can't back it up or print it because of what happe... Read more

A:Moving Windows XP Pro Sata Hard Drive to new system

12 more replies
Answer Match 70.56%

I have a problem with Sony PMB software not recocnizing my DVD RW. Sony says its because my computer see's my drive as a scsi. It is a Sony DVD RW that is hooked up with a SATA cable to mobo. The box that the DVD RW drive came in shows it as a SATA. Do i need to do something in the BIOS to correct this. Any help would be appreciated. Thanks.

A:[SOLVED] Dvd drive listed as scsi hooked up as sata.

Hi Odie, if you would be so kind as to mark this thread solved by clicking on the thread tools option at the top of this thread and selecting solved from the drop down menu. Then post this problem at the link below, our hardware techs will fix you right up. They are very adept at this sort of issue and will be happy to assist you. There are many sections to our forum so it is easy to get confused at where exactly to post a problem.

http://www.techsupportforum.com/f255/

You haven't done anything wrong, it's just that I want you to get the proper help you need. Remember to mark this thread solved before posting over there so you don't have 2 threads open at once.

Thank you,
Patmark

1 more replies
Answer Match 70.56%

Hey guys,
Ill try and keep this straight and to the point but at this point myself, intel, and dell are baffled. I have a Dell XPS730 with the Nvidia Nforce 790i chipset. I run two 500 gig SATA drives under RAID 0. I recently installed an Intel X25 80 gig SSD and have ran into problems. Windows recognizes the drive as SCSI in device manager. Granted it works however because it is listed as SCSI TRIM and the intel toolbox wont work which makes an SSD useless.

After tons of research I have found that because of the Nvidia chipset it makes the drive show up as SCSI. I have tried Vista and Windows 7, both show it as SCSI. I have moved the SATA cable away from the other main 4 that support RAID with no luck. I have refomatted several times as well with no luck. I have completely disabled RAID in the bios and it STILL shows as SCSI. Is there any way to get around this? I have read that changing the nvidia controller drivers may work but im not sure what I would switch them to? I am totally lost and any info would be MUCH appreciated!

A:SATA SSD Drive shows up as SCSI - Rediculously baffled...

Windows will do this with some Sata Controllers.

9 more replies
Answer Match 70.14%

Hi! I currently got a new system with Windows 7 after my old XP system died, Since I cant boot up the old system I was wondering if I could install the old C-drive from it into my new(Win 7) system if so, would I have to have a dual boot option or would it recognize it as a Hard-drive and allow me to access it through Win7?

So in a nutshell can I take a hard-drive from a Winxp system and throw it in my new systems drive bay and without doing anything have it recognize it or will I have to go into BIOS?

I was going to plug-n-pray but I figured I'd enlist some help from some Techies namely anyone who can answer/help me

Thanks so much for anyone whom can help
 

A:Installing a WindowsXP Sata hard drive onto a new Win7 system?

It will just recognize it as a hard drive. For it to work in a dual boot setup you will have to install XP after the hard drive is installed in the computer.
 

3 more replies
Answer Match 69.72%

Have a W540 with the Samsung MZ7TE512HMHP-0001L SATA Solid State drive.  Noticed after one of the updates from either MS or Lenovo, the driver changed to a SCSI driver, and the performance has slowed.  It now shows a 6.3 on the windows experience, vs the 7.6 it did before.  I haven't seen a SCSI drive in years and doubt that is what is rockin in this workstation. Things I have tried:1. Update driver (says I have the correct driver)2. Run Lenovo Support utilites Suggestions welcome

























Samsung SCSI.jpg ?118 KB

More replies
Answer Match 69.3%

I am wondering if I can access files on a SATA or IDE hard drive installed in a desktop computer with no other hard drive installed. Meaning, the drive I am trying to access isn't configured with drivers for the desktop's other hardware or motherboard. There is no other drive installed in the desktop. I was wanting to know if I could use a boot CD (Hiren's or Linux) to use as way to access files, pics, etc. and transfer it to a usb flash drive. Any help would be greatly appreciated.
 

A:Solved: Can I access data from a SATA or IDE hard drive on a system it's not configur

8 more replies
Answer Match 66.78%

Computer: Dell Dimension 5100. 6 years old.
Current hard drive: SATA 250GB (think it's SATA 1). Dell web site says its ATA-133

Looking to: Replace the hard drive due to faults

Question: Can I fit a SATA 3 hard drive in this computer? Would this just work at SATA 1 speeds because of the old mainboard? Most of the hard drives listed for sale are now SATA 3.

Thanks for any replies.
 

A:Solved: SATA 3 hard drive to replace a SATA 1 hard drive?

11 more replies
Answer Match 65.52%

Built a WinNT 4.0 server using SCSI raid array. Works fine. Enabled atapi in services and it sees the IDE CD-ROM (master, secondary channel) just fine.

But it won't see the IDE HD (master, primary channel)!

Jumpers, cables, HD all okay.

I'm sure I'm missing something obvious. Anyone have a clue?

Thanks,

Jim
 

A:scsi NT -- how to add IDE hard drive?

Greetings

Can your BIOS see the HD? If not, then your OS has no chance of ever seeing it.

Have you tried it as a Slave on the secondary controller? Or better yet, keep it as a master, and make your CD-ROM the slave on the secondary controller.

You could have a dead primary controller (I know my secondary controller is not functioning... damn, I need a new PC - who wants to help me raise funds for a new PC - any compnay that helps will get free advertising from me ), or a dead HD.

There could be something else wrong, but I am not that great with hardware issues. If you want, I can move this to the Hardware forum.

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/reuel/multiboot

Every morning is the dawn of a new error...
 

2 more replies
Answer Match 65.52%

Hi,

I have a Dell Poweredge SP5166-2 that uses Seagate Barracuda (4.3gb) hard drives put into trays that are slid into the computer and connected to the motherboard. I want to put another hard drive in but it is an HP C2490A (2.1gb). When trying to install it the first times, bios recognizes it and says it is working properly, but it is not displayed under Win2k's logical devices or my computer. It is however displayed under device manager. So, it does exist but I just can't make it work within my computer. I also tried to make connect the SCSI bus cable that goes into the cd rom into the hard drive, but no luck. Is there any master slave config for scsi devices? My understanding is that there aren't any; only scsi ids. Any help is greatly appreciated. Thanks in advance.

Louis
 

A:HP SCSI Hard Drive

Hi,

You can check couple of things.

You may want to check SCSI ID(which usually a jumper or switch on the drive.).

If you want the drive to be C:, check host adaptor which ID is bootable.

Make sure you have a terminator at the end of the chain.

Go device manager and check if your SCSI card has conflict with other devices.

Good Luck,

TJ
 

1 more replies
Answer Match 65.52%

I was able to salvage an old system from the trash at work. It has a Western Digital 4.3GB SCSI hard drive and I want to know if i can use it in a non-scsi system. To use it will I have to use a SCSI adapter or have to have all HD's as scsi?
 

A:Using SCSI Hard Drive

You can use it if you have a SCSI adapter and you can mix IDE and SCSI in the same PC.
 

1 more replies
Answer Match 65.52%

Whenever I boot up my old computer, I get a message during bootup that tells me that the SCSI boot device is not installed. I have a SCSI hard drive connected to an Adaptec SCSI pci card. I had just taken the hard drive and card out of that computer and tried to install them on this computer, and it didnt work, so I put it back. I tried running a SCSI utility on the bootup screen, and it didnt even recognise the existance of the hard drive. It wont let me format or anything. If there is something I can do to get it working, then please post. I do not care if the solution requires reformatting, because I do not have any really crucial data on the drive.
 

A:SCSI Hard Drive

9 more replies
Answer Match 65.52%

Hi everyone,
I wonder if anyone have a good site where it can guide me on how to installed a second SCSi hard drive. I have a HP tc2120 server with one 36.4 Gb drive. I have anotherone just like that. But I never have installed and SCSI drive. I have only done the regular IDE drives. I need some help.

thanks,

AMD2800
 

A:SCSI HArd drive

9 more replies
Answer Match 65.52%

Hi,

I've just bought some hard drives.
They weren't expensive, i got them in a clearance sale, they are SCSI types.

One of my PCs uses an SCSI hard drive as its local drive 'C',
However this PC has a power supply feed to the SCSI hard drive, and also the
SCSI connector ribbon cable.
Thats two separate cables.
One for signal, and one for supply.

The SCSI hard drives i bought have no feed point for a power supply.

So i don't know how to try them.
They must use some supply to operate, so could it come via the SCSI cable ?
I suppose it must come from there ... ?

Ive never seen ones like this before.

I dont want to try them without checking first.
Any comments or suggestions would be welcome.

Model: WDE18300-6029A8
Made: 26th May 1999

I got eight in all, some like this one, and some others.
Now i'm a bit worried about trying them, as they might try to draw more current
from the SCSI signal wires than they were meant to give.
These ones come in a sort of Slot-in carrier, what difference that might make
i don't know.

Cheers, John
 

A:Some help please in trying to use an SCSI hard drive.

14 more replies
Answer Match 65.52%

My computer is not recognizing my SCSI 70 ghz drive. It keeps saying PXE-E61 failure check cable. It worked fine last night, I reformatted my secondary IDE 40 ghz drive and I could not get my computer to start. I had to disconnect my SCSI drive and setup windows xp on my IDE 40 ghz drive to get my computer to start. It still doesn't recognize my SCSI drive. I need help.
 

A:SCSI 70 ghz hard drive

This generally pertains to a bad hard drive or bad hdd cable same as a "non system disk error" with same solutions.
http://www.computerhope.com/issues/ch000229.htm
 

2 more replies
Answer Match 65.52%

ok i posted eariler and its final the scsi seagate is mine and it looks like im keeping it.ok so i bid on the scsi control card thats ldv and now im looking for a cable . my question does the cable need only one terminator? im new to this so if anyone can help me out on installing a scsi hd it would be greatly appreciated
 

A:scsi hard drive?

You want a 68pin internal LVD cable, it should either have a terminator built in + two connectors (one for the SCSI card, one for the hard disk), or three connectors + you'll need to plug a terminator into it. The devices should be arranged with the SCSI card at one end, the hard disk in the middle and the terminator at the other end. The SCSI card provides termination for its own end (unless you want to put the SCSI card on the middle of the cable, in which case you need a terminator for each end). The terminator must be LVD or LVD/SE compliant.
 

3 more replies
Answer Match 65.52%

Hi,

I've got an old computer that we've just been using at the office for payroll and a few other things. The problem is its runningout of hard drive space, so I was just going to install another hard drive, but I forgot that it has a scsi hard drive. I was wondering if i could hook a regular hard drive up to the scsi cable? Any help will be greatly appreciated.

Thanks
 

A:SCSI Hard Drive

No.
 

3 more replies
Answer Match 65.1%

Hi,

We have a PC here with a fried motherboard and the replacement is going to take a few days to arrive. In the meantime, we desperately need to get the userís data off the hard drives. (Sodís law Ė the user hasnít been backing up and the data is essential.)

This PC is the only one we have with SATA hard drives. Iíve bought a Q-Tec 350SA Serial ATA PCI Card. Apparently (in theory) if I fit this to another PC (with IDE) I can then plug the SATA drives in and backup the data on them. If I can do this, at least I can then set the user up on a spare PC until his new mobo arrives.

Iím just a bit nervous about actually doing this. Iíve never done anything more complicated than swapping hard drives or installing RAM and graphics cards and the like. Iíve hooked up laptop hard drives to desktops to remove data, but that was straightforward Ė plug Ďem in via an adaptor cable and they worked straight away.

The guy in the shop I bought the card from said that it should work fine, it shouldnít damage the hard drive or any of the data on itÖ but he wasnít 100% sure. He said itíll work great for connecting a brand new SATA drive to another PC, but wasnít completely sure about connecting an existing drive from another PC to remove the data. Iíve contacted Q-Tec via email but their standard response time is 48 hours, I canít find a telephone number to call and ask them, and the user is desperate to get this data off a.s.a.p.

So, should this be a straightforward process... Read more

A:Connecting SATA hard drives to existing IDE PC...?

It should be very easy. First install the sata card into the working system. Install the drivers and make sure the device is installed correctly in device manager. Next shutdown and connect the drive. Note you will need a power adapter for the drive since sata and ide use different power plugs. The one exception to this is a WD drive; it has both power plugs on the back of the drive. If it is one of these, DO NOT use both plugs. Just install one power plug.

Once the drive is installed and power is connected to it, restart the system. You should see the drive in explorer / my computer; copy whatever you want.

The only problem you might have is some bios [ami] like to reset the boot device. If you have a problem, enter the bios and make sure the system still is set to boot from the original ide drive.
 

1 more replies
Answer Match 64.68%

I want to transfer data from my hard drive in my laptop (Lenovo Y480) to a hard drive in my desktop. the cables for the sata adapter do not fit the hard drive from the laptop. Is there a different form for a 2.5 hard drive and a 3.5 hard drive?
 

A:sata to usb adapter cable dosen't fit sata hard drive in laptop?

Does the drive have an adapter need to remove to expose the SATA conenctors? I don;t see anything about the Y480 not having a standard SATA drive and laptop and desktop SATA connectors are the same.

Maybe post pictures of both the drive and your SATA cables.
 

2 more replies
Answer Match 64.68%

I have a Win2k3 Small Business Server being ran with RAID on 4 hard drives.
1 hard drive just got failed and i replaced it with the "same looking" hard drive.
When i plug in the new hard drive i noticed that it does not match up to the others in size and its not meeting the requirements in size to rebuild.

When i looked closer at the hard drive i noticed the following difference from the other 3 working hard drive and the 1 damaged one:

Part: 9v8006-001
Firmware: e302

The model and brand are the same exact settings but non the 2 noted pieces of information. Do you think this could cause a problem if this 1 hard drive was different from the others?

Just wondering because i never had this happen to a SCSI drive on RAID settings, and yes its set to be auto hot swappable and ready to rebuild RAID - its just not working because of the size..........so it says.
 

A:SCSI Hard Drive Question

You should be able to use it. If that hard drive is slower then the other, it will slow them all down to match it, and your hard drives will only use as much space as is in the smallest drive. That is the way it works with conventional hard drives anyway. I would back up your data if possible first before you try it (if you haven't already), just in case.
 

1 more replies
Answer Match 64.68%

I have a SCSI Hard disk, that i some how messed up by transfering it to a different controller, cuz i didn't know that you can't do that, i do now. i tried to get it to come back alive, by puting it back on the controller, but my master partion table thing got messed up, when i had tried to use it on the other controller, the first controller was a LSI Logic, and the second was an Adaptec 2490-UW. so i tried to use diskprobe to read the sectors and set it up like that, which failed. i thought it might have something to do with the board so i had taken that off, but now when i go into the Adaptec "SCSI-Select" program it doesn't show a size. could i have connected my board back up the wrong way?? it does still spin up, but i don't understand why it lost the size of the disk. it had the size before btw. it is a 18.2 GB 10K RPM SCSI-2 drive, and i have 2 other identicals if they may be of any help. but i really want to know if this drive is toast.
EDIT:: COMPAQ Model #: bd018734a4
 

More replies
Answer Match 64.68%

hello,

im going to setup a IBM Xseries 235 server in my home soon. I bought several drives. I noticed that one of the drives i bought is a scsi drive that runs at 7200k and the other drives run at 10000k. i bought two 7200k hard drives and 4 10000k hard drives. the server only supports raid 1. Would it be okay to create 3 raids. My computer supports up to six scsi hard drives. Can i create a raid with two 10000k hard drives to host my operating system and a little data, a second raid for my web server data and the third raid for my 7200k hard drives for ...idk, music.?

does that sound like it would work. would the 7200k hard drives slow down my computer?
is it possible to create 3 raids on a single server?
 

A:7200rpm scsi hard drive

bump
 

1 more replies
Answer Match 64.68%

I am helping my brother in law out trying to do a non destructive repair using the installation disc. When we went through all the steps and got to the section that shows the hard drives it does not recognize the hard drive and won't let us do a repair. If we wanted to do a clean install it still would not recognize the hdd.
I decided to check bios and see what was recognized and in the hdd section it showed that the hdd was a SCSI. It is not a SCSI drive. We checked PC Wizard 2008 and it showed SCSI. All the places show that it is a SCSI. What is causing this? It is not a SCSI drive but a SATA drive. Can anyone tell me what has happened?
 

A:Hard drive recognized as SCSI

it is SCSI emulation. Some USB drives show up this way too.
 

4 more replies
Answer Match 64.68%

Does anyone know of a website that I would be able to find the drivers for a scsi hard drive? I have been searching for what seems like weeks now and can't seem to find anything.

A:SCSI Hard Drive Driver?

The driver you probably need is not for the SCSI "drive" itself. It's for the SCSI "host adapter" to which the drive is attached.

Please give brand/model specifics of your machine... laptop or desktop (probably) and type/model/details, SCSI drive (internal or external), SCSI host adapter to which the drive is cable-connected.

thanks.

5 more replies
Answer Match 64.68%

OK you SCSI experts, I've got a question for you. First, the particulars of my computer:

Dell OptiPlex GX110, 733mhz Pentium III, 256 Mb RAM, Adaptec AHA-2940U/AHA-2940UW PCI SCSI Controller with a maximum data transfer rate of 40 mb/sec., Boot drive is a SCSI IBM DCHS04W (4.50 GB) 7200 rpm with maximum data transfer rate of 40 mb/sec. and average read seek time of 7.5 ms.

Now, I just purchased a Fujitsu 18.2 GB, 10,000 rpm, SCSI hard drive, with a maximum data transfer rate of 80 mb/sec. and average read seek time of 4.7 ms.

My question: Will I benefit from the speed and efficiency of the Fujitsu drive by making it the boot drive?

I know that my SCSI controller card will limit the maximum data transfer rate to 40 mb/sec., despite the 80 mb/sec. rating of the Fujitsu, however, will the 10,000 rpm and the low average read seek time of the Fujitsu overcome the limitations of my SCSI controller card to the point that I should make the Fujitsu my boot drive? Thanks in advance for any assistance.
 

A:SCSI hard drive question

I will tell you this... going from 5400rpm to 7200rpm spindle speed makes a major difference. So going from 7200 to 10000 will make a difference.

For me, the decision would be easy. I would put the fujitsu as my boot drive.

It's a bigger drive and it's has better access times.
 

3 more replies
Answer Match 64.26%

Just tried to install a SCSI hard drive on a win98 system.

Drive is in Device Manager but has no Letter assigned. Does not allow me to.

BIOS recognizes drive and assigns D:
 

A:SCSI Hard Drive - No Letter Assignment

7 more replies
Answer Match 64.26%

As per the norm, I got a Monday call from a customer freaking out about their server. I paid them a visit and sure enough the Western Digital SCSI hard drive I replace about 6 months ago is dead. SCSI utility is seeing it as a 1MB quantum. I told them to boat anchor that machine and get a new one. It's a pentium (i don't remember) 600MHz machine so it's a bit of a dinosaur anyway. their book keeper is the hero of this story. I taught her how to backup the server which she did before she left on Friday. I loaded backup files on an unused workstation, mapped some network drives and had them back up and running PDQ.

What would make a machine eat hard drives? Thin it might just be a fluke, virus, inferior Dell product??????
 

A:2nd SCSI hard drive failure within 1 year

Is there a UPS or surge-protector installed between wall-socket and PC?
If not, unstable electricity might cause that, such as spikes, brown-outs or black-outs.
Or the PSU might be on the edge of its capacity. If the HD is a 10'000 RPM disk, they need a pretty good and stable PSU.
The disk should still be under warranty.
 

5 more replies
Answer Match 64.26%

Long story short.. An office I help out had a RAID Array crash without a backup. The data has been recovered and is sitting on a Fujitsu Hard Drive (Model: MAX3036NC).

My computer, and the remaining working computers in the office are all IDE or SATA architecture.

I'm guessing there is a PCI SCSCI Card that I could buy, install this hard drive and access it that way. If that is the case, could someone recommend a card/manufacturer that would work for this case?

Any help is appreciated.

Edit: We also have a laptop available if there is a PC-Card solution.

Thanks,
 

A:Solved: Need to access a SCSI Hard Drive

6 more replies
Answer Match 64.26%

I am about to build my own PC. It will have a Maxtor Sata hard drive. When you are installing Windows XP Pro, do you have to press F6 and install a third-party driver? I was reading this book, and the guy said to do that. I have never heard about that before. Can you just hit install XP and let it do everything? Thanks.
 

A:Installing Windows Hard Drive SCSI

Yes you need to hit F6 to install a RAID driver. You will be able to get that driver from the motherboard manufacturers website in most cases. The resulting RAID driver that you get will need to be on a floppy, so if you were planning on not putting a floppy in the computer you were building (like many do), you will have to at least have a floppy during the setup process of Windows. Sorry, theres no magic "hit install XP and let it do everything"
 

5 more replies
Answer Match 64.26%

Gigabyte GA-6LX7 Mb, 400 MHz celeron, 64 meg ram, 13.6 gig Maxtor ide hard drive, 9 gig Seagate scsi hard drive, win 98 se, DTC 3502A scsi adapter, Toshiba scsi cd-rom.
My scsi cdrom works fine, but. I can look at the scsi hard drive in windows and it says that it is only 19.2 meg, I can't access it in windows or dos. The on-board bios for the adapter doesn't find the hard drive or the cd-rom, but, I can still access and use the cd-rom drive.
Also, with ASPI3520.SYS enabled, the adapter and the primary and secondary ide controllers are disabled in device manager, it also makes A: drive use ms-dos mode compatibility.
I used the setup mode of the adapters BIOS to format the hard drive, After it formatted and I continued it says that it can't find a scsi hard drive.
 

A:SCSI Adapter/hard drive problem

Did you run FDISK and see if the drive is visible there?

Are you sure you have your SCSI termination correct?

If there are 98 drivers for your card you shouldn't need to load a driver file in the CONFIG.SYS - as you have seen it will put you in compatibility mode if you do.

Just checked the DTC site - it says:
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Windows 98 Drivers

Included - Use built-in Adaptec 151x/2x drivers <HR></BLOCKQUOTE>

Is that what you are using?

------------------
Get free stuff and help out a poor computer tech
(5/20 new, unlimited, pay to surf site added):
http://www.rkfdcore.com/ebaypics/referrals.htm
 

3 more replies
Answer Match 64.26%

*RESOLVED* Can't install second U160 SCSI hard drive

I have DL145 G2 from HP
http://h50043.www5.hp.com/Enterpris...nt/questions.aspx?cnty=th&cat=DL&ser=145G2#g1

On the black thing that is attached to the cable which seems to be a controller, it says U320. It originally came with U320 SCSI hard drive but I purchased two U160 hard drives because I was a *****. I connected one U160 SCSI hard drive to the server and installed windows os without any problem. But when I tried to connect the second SCSI U320 hard drive, it didn't work. In the BIOS, it correctly recognized two hard drives but when windows 2003 server loaded, I couldn't see or install the second hard drive. I read some FAQ in the link I copied above and I thought that I have to purchase optional SCSI cable or my U320 SCSI cable only supports one U160 SCSI hard drive or something... But I don't see any place to plug any more cables on the motherboard so I'm really puzzled...

I use two SEAGATE ST3146854LW 15K 68 PIN U160 DELL M6616
and my server is DL145 G2 AMD Dual-Core Opteron 275 2.2GHz 390845-001
 

A:Can't install second U160 SCSI hard drive

So the BIOS sees both the drives?

What do you mean by Windows not seeing the hard drive? You did check in the Disk Manager, right?

SCSI is pretty much backward compatible, so your U160 drives should work no problem. And you can hook up 15 of them to a single SCSI cable no problem.
 

8 more replies
Answer Match 64.26%

How do I get Windows XP Pro to duel boot from a second scsi hard drive. First scsi hard drive has Windows ME and works fine.
Second scsi hard drive has Windows XP pro but only works when I change the scsi ID from 1 to 0. But then the other scsi hard drive is not reconized in windows explore. However, it is reconconized in the XP disk manager and everthing else appears normal excapt that the drive is not read in explorer. Any help PLEASE
 

A:Duel Boot XP on second scsi hard drive

Was XP installed with both HDs in the machine, and with Me installed first? If you installed XP with only its HD in the system (so it was 0 when you installed it), the XP boot files are on the wrong hard drive. They need to be on the system's primary partition, which should be C: (where Me should be now if this is going to work right and properly dual-boot) and the ARC path in your boot.ini file is referencing the wrong disk for the XP startup to look on to boot XP when you have both disks set up.

Please post the contents of your boot.ini file here, and we will take a look.
 

1 more replies
Answer Match 64.26%

can some help me,i am trying to install 2 4.5 gig SCSI hard drives in windows 2000 .i an useing pci scsi card controller.
i load win 2000 boot disc,s my system finds scsi,s no problem
i format them and partion them .when it reboots to start loading windows it say cd rom error ! INSERT BOTT DISC AND RUN AGAIN
any body got any pointers...

thanks ....rog
 

A:two scsi hard drive install in win 2000

8 more replies
Answer Match 64.26%

Hello all,

I have an HP Workstation XW8200 running Windows XP SP3 that I tried hooking a projector to. I used a VGA splitter with one out going to the monitor and the other going to the projector. When connected while the computer is already running, the projector works. But once the computer is off, with the projector connected and running, and then the computer is turned on, it no longer recognizes my hard drive.

This problem is NOT fixed when the projector/splitter is disconnected.

In the BIOS, the hard drive is recognized but it will not boot. I tried booting into a Windows XP disk and running recovery mode, but it doesn't see the drive. Same goes for booting off of my thumb drive into Linux (Lucid Puppy 5.2.0), it does not see that I have any hard drive installed.

This has happened to two computers already, both are the same model and setup.
The hard drive in question is connected to onboard SCSI, and is a SeaGate Cheetah, I'm not quite sure what size.

I did take another hard drive from a third HP XW8200 and put it in to the non-working computer and it booted fine.

I do not see the projector causing the computer to not recognize the HD, but it definitely seems to be the catalyst for both of these computers (with each individual problem happening months in between, and over a dozen other similar computers still working fine).

Any help would be greatly appreciated, I'm at my wit's end.
Thanks,
L_C

Oh, and there are no error messages when trying ... Read more

More replies
Answer Match 63.84%

I have 2 IDE HDs installed and added SATA drive lately. SATA runs in IDE mode in CMOS. Problem is, even though SATA drive is recognized by BIOS, Disk Manager, Norton Ghost & System Works, it doesn't show in My Computer, causing problems with saving and opening files. Tried a couple of tricks (changing the drive letter,disconnecting & reconnecting the drive, reformatting etc. ) nothing seems to work. I use this SATA drive for storage and for now I have to drag the files down there manually.
I don't know if it's of any importance, but I have nVidia GeForce graphics card onboard.
Has anyone encountered this kind of a problem ?
Thanks Carl

More replies
Answer Match 63.84%

The time has come for me to wipe the hard drive and re-install Windows 7 following a recent disastrous download that's effectively knocked out my Internet Explorer 11 and rendered Internet browsing difficult. My system has since become unstable and progressively slow and unfortunately, for some reason, I am unable to Restore to any previous installation. As I have loads of files I want to access, I've decided get a new Hard Disk and run the original H/drive (if possible) from a SATA drive Docking Station. So essentially, I would like to know if my Dell DXC061 will run and support a new Seagate 1Tb SATA3 7200rpm Barracuda. My BIOS is Ver. 2.4.0 dated 05/24/07. I have opened the CPU to see that the current drive connectors appear similar to those on the SATA Docking Station and think my old drive will fit it. However, it's now occurred to me that its possible the newSATA 3 drive may not be compatible with my BIOS or Motherboard. Any help or comments please? Incidentally I have most of my most useful files backed up on an external drive, so all, hopefully is not lost.

A:Upgrading Hard Disk from SATA to SATA 3 Drive

You need a SATA3 port to connect a SATA3 HDD to be fully compatible.

6 more replies
Answer Match 63.84%

Hi there, i have recently bought a new Sata DVD drive for my desktop machine, it came with no instructions or cables.

I have a Sata cable which connects into my PSU, does the drive also have to be connected to the motherboard?

I have attached a picture of the cable i have.

Many Thanks
 

A:Connecting Sata DVD drive

You'll need a SATA data cable to connect the drive to a SATA port on your Motherboard. If your motherboard does not have SATA ports, you will need to install an adapter in an available PCI or PCI express (preferred) slot. Search for "pci sata card" or "pci express sata card"
a picture of the connector is here:
http://www.satacables.com/html/internal_sata_signal_data_cabl.html

You can get just a data cable, or a combo data/power adapter, a picture of that is here:
http://www.usb-ware.com/sata-data-power-adapter.htm

HTH

Jerry
 

2 more replies
Answer Match 63.42%

My first build: Via Kle-133 mb with Athlon 700 and 64 sdram
on board video and sound and 9gig Seagate Hard drive needing a scsi-2 thingy

My problem...
I power up and all things begin running and on the monitor it whizzes past the first screen that reports the "Award Modular BIOS v6.00pg, An Enery Star Ally etc...
Main Procecessor: AMD Athlon (TM) 700MHZ
Memory Testing:57344 ok + 8192k Shared Memory

Primary Master: None
Primary Slave: None
Secondary Master: Toshiba CD_ROM XM-5602B 1796
Secondary Slave: None

Floppy disk(s) fail (40)

Then immediately a black screen which says
BusLogic Inc BIOS Version 4.94G
Intelligent Bus Master SCSI Host Adapter
(c) 1995 BusLogic Inc. All Rights Reserved

BusLogic PCI SCSI Host Adapter Firware Version 4.28D
Press <Ctrl-B> to Enter AUTO-SCSI

Which I do the <Ctrl-B> thing and it takes me to a configuration Utilities and Diagnostics program. I try to push the right buttons
Under Utilities and under SCSI Device Information it says
SCSI ID 3: SEAGATE SX910800N
SCSI ID 7: BusLogic BT-946C
(which makes no sense since the hd is a Seagate st410800N)
Under Verify Disk I get the same result

OK then I try the Format Disk option
and the same exact result box comes up with SEAGATE SX910800N highlighted... when I press enter, it asks: CONFIRM? yes or no, I highlight yes and enter and then.... a freeze.

Now if I reboot it will do the same thing every time.
If I ignor the Press <Ctrl-B> to Enter AUTO-SCSI thing, the puter will g... Read more

A:New computer built hard drive with scsi problem

11 more replies
Answer Match 63.42%

I have been trying to determine which device would be best suited for cooling a pair of SCSi 15k HDDs. I have been looking around at some of the following (in order) of interest. Sound dampening is not a huge concern, mainly concerned about cooling.

Smart Drive 2002 Copper Hard Drive Enclosure- SCSI compatible? Little documentation to indicate if rear is already equipped with wiring or is this will work with SCSI cables?
AEROCOOL HB-101 Hard Drive Cooler Aluminum- Wondering if this is a gimmick or a real option... or a SilverStone SST-FP53-B 5.25" Hard Drive Cooler or a Cooler Master CoolDrive 3... ??? Any other reccommendations based on experience or reviews? Thanks in advance for any help.
 

A:NEED serious advice about Hard Drive Cooling (Pair of SCSI 15k)

if you haven't already bought a case, buy a case with a hard drive cage fan and put it to use. for internal enclousures, all same size drives and cages are compatible. just make sure you have cool air blowing on those drives and they should be just fine.
 

2 more replies
Answer Match 63.42%

Hi, I am working on a machine for a friend. It is a server tower which he picked up cheap, it has a 10 gig SCSI hard drive which is facing imminent failure. He picked up an IDE drive cheap, and wants to switch to it.
My question is: if I get an IDE data cable, and a controller card which goes into a PCI slot, can I use the IDE drive in place of the dying SCSI unit?
thanks,

john cunningham
 

A:Installing IDE drive in a SCSI system?

Yes, you can install a controller card and drive. Are you planning to install the os to this drive? If so, you will need to install the driver during setup or setup will not find the disk to install to.
 

3 more replies
Answer Match 63.42%

Hi, I currently have a IDE dvd drive, and now want to install a Sata DVD drive. I had a card adapter (for sd, xd cards etc), but I did not have another Sata cable, so I have disconnected the card reader, and used the cable for the DVD drive.

Now when I start up the computer, it is continually coming up with "disk boot error please insert system disk and press enter". I have searched google and this forum, but don't understand a few things.

Firstly, I am using IDE cables for one of the DVD drives, and a Sata cable for the other. I was reading that is might be changing it to a master... Not exactly sure what this means, but in Bios, is says 0 Master: Old dvd drive, 2 Master: New DVD drive. What am I doing wrong for this to be coming up? I know the new one should be coming up as 0 Slave, but its not...???

I have disconnected the new dvd drive, and connected the old one (as it was), and it is still coming up with the same error... Have I dont something wrong?

Thanks in advance. I apologise if I haven't included all the information you need. Just reply back with what I have forgotten.
 

A:Connecting a new sata DVD drive - problems

Hi and welcome. Did you disconnect the hard drive?
 

1 more replies
Answer Match 62.58%

How do you get the power to your hard drive. The power supply has no extra wires or anything. Where does it come from?
 

A:{SOLVED} im a begginner, installing a new hard drive (scsi) so this may seem silly,

8 more replies
Answer Match 62.58%

Hi I have an old proprietary graphics system that needs a SCSI hard drive, I found a Compaq C2247 1gb hard drive that should work (cylinders,heads,etc match one of its table drives) but it doesn't turn itself on when the PC is powered on.

The drive works perfectly in my new system as long as I have the "send power on signal" checked in the bios.

Is there any way of jumpering this drive so it turns on the instant power is applied as opposed to sending a signal to tell it to turn on?

Thanx
Ryan
 

More replies
Answer Match 62.58%

This is my first attempt at building my own pc so forgive me if this is a silly question.

This pc has an SCSI as the primary drive (17gig) and I'm trying to add two 320g drives that are edi drives.

I added a new dvd drive, video card, and usb 2.0 card and those all work fine.

I tried the drives set to slave as well as well as cable select. I even removed one of the drives so that the only connector is the edi slave connector.

Am I having a problem because I'm trying to use an SCSI drive and the two edi drives? Do I need to use one or the other in order for this to work?

Any help would be greatly appreciated.

Let me give a little more information if it helps. The computer is a Dell Precision 530 Workstation. Company upgraded all their pc's and sold off the old ones for $50 each. I want to ue this as a media server for my home network.

It has a 17GB SCSI drive on it now that has my Windows XP Home Edition and a few other programs on it. I was going to keep it for exactly what it does now. Basic everyday pc duties.

I wanted to add two bigger drives for storage. The mother board has an SCSI connector and two EDI connectors. The secondary EDI connector is connected to the DVD drive and the CD drive. Obviously I don't need both but just left the cd drive in there since it wasn't hurting anything. Those both read and work fine.

I have the two 320 GB storage drives connected to the primary EDI connector.

The ribbon cable attached... Read more

A:PC won't recognize extra hard drives (edi) primary is SCSI drive

Hold on a minute... edi you mean IDE or eIDE don't you?

SCSI hard drives need to have terminated cables. IDE cables do not use termination. I would ditch the SCSI, but you will have to get into the bios settings and change the primary boot drive settings
 

8 more replies
Answer Match 62.58%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) CPU G2030 @ 3.00GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 2
RAM: 3967 Mb
Graphics Card: Intel(R) HD Graphics, 1791 Mb
Hard Drives: C: Total - 448568 MB, Free - 399972 MB;
Motherboard: Dell Inc., 0XFWHV
Antivirus: AVG AntiVirus Free Edition 2013, Updated and Enabled

I am trying to connect an internal SATA HDD as an external drive for use as a backup medium for my system.

To connect the HDD, I am using a cable-set, consisting of a power-adapter, a cable adapter (6" long, 4-pin to SATA power fitting), two-sided femaile receptacle and ribbon-cable data fitting with a shielded UBS cable attached, 6" ribbon-cable.

With no power on, I connect the power-adapter and assorted cables and adapters to 125V AC power and to a USB port of my computer and to the SATA HDD. Everything seems to fit, mechanically.

I apply power to the computer and to the assembled SATA HDD components. The computer starts normally, but I do not notice any vibration, stirring, whirring of the SATA HDD. Also, when the computer is full booted, and I look at My Computer with Windows Explorer, I find that it does not recognize the presence of anything at a USB port, particularly not my SATA HDD.

I have tried fully booting the computer and connecting the HDD to the USB port afterwards, as I might a memory stick, but it is not recogniz... Read more

A:Connecting internal SATA HDD as external drive

16 more replies
Answer Match 62.58%

I connected a second Sata drive and it now seems XP is trying to boot from that drive instead. When I disconnect the second drive it boots normally. The thing is it worked fine until I installed Linux (Debian) alongside XP but I'm not sure why that would cause the issue.

Anyway, what happens is after I connect the drive I get the following:
"strike F1 to retry boot, F2 for setup utility"

When I go into setup utility and drive configuration I see the SATA primary drive is the new drive whereas the original drive which I want to boot from is listed as the primary master drive. SATA secondary drive and primary slave drive are listed as "off". Do I need to reconfigure this is some different way or is there perhaps something else going on?

Thanks
 

A:Having problems booting after connecting second SATA drive

Sounds like your new drive is probably connected
to a sata connector that has priority over the other.
You should just need to change the first boot device
back to the original drive in the bios.
 

1 more replies
Answer Match 62.16%

Hello all. This is my first post here. I Bought a scsi hard drive.

Maxtor 18GB SCSI Hard Drive
Formatted capacity: 18.4GB
Interface: Ultra160 Wide LVD SCSI-3, 80-pin (80 to 68-pin SCA adapter included)
Rotational speed: 10,000 RPM
Average seek time: 4.7 ms
Cache: 8MB

I have the ASUS a7n8x deluxe mother board. What pci scsi adaptor card do I get to run the hard drive? What cable do I need?

This is my first time using a scsi drive. I did a search on newegg and saw a range from $22 - $400+. Please educate me in the ways!
 

A:Installing a scsi hard drive on an asus a7n8x deluxe board

Anything from Adaptec is perfect, but not always the cheapest.
It's what I use on no less than 3 of my PCs.
http://www.scsi4me.com/index.php?menu=menu_scsi&pid=213&display=39160.htm
Brandnew Adaptec ASC-39160 Dual Channel Ultra160 SCSI Controller, $139.-

http://www.scsi4me.com/index.php?menu=menu_scsi&pid=3237
Brandnew bulk LSI Logic LSIU160 single channel Ultra160 all purpose controller $35.-

They have a whole collection of others, as well as loads of information there.
You could try and pick up a used card on Ebay as well.

You will also need a 68-pin internal flatcable with a terminator.
Look around on that website.

Also go to
http://www.adaptec.com/worldwide/pr.../SCSI&prodkey=talk_about_scsi&type=Technology
for a bit of background.
 

2 more replies
Answer Match 62.16%

Hello,

I have a BIG problem here with a SCSI drive on our web server in our school.

All of a sudden i keep getting Start Unit Request Failed at start up.

and then when I try to verify the HD on the SCSI menu I receive an
"UNEXPECTED SCSI COMMAND FAILURE" with above a SENSE KEY: "NOT READY".
Like it says, it's not ready.

now this is the secondary hard scsi disk, my primary bootup disk is fine, when i boot up windows, it boots up fine, but doesnt see the e: drive. in device manager though it is there and it says it is working properly.

Do you think it could be the hard disk has failed. only last week on this same server the power supply went. and we changed the power supply. could thsi be related?
Thanks

Ranj
 

A:SCSI hard drive problem. Start Unit request failed.

Try reseating the connectors to the drive. You might swap the power connector between the two drives. Maybe something was bumped when the power supply was removed. If that doesn't work then probably the drive has failed. I take it that the secondary drive is on the same cable as the primary one and it was working ok before the supply went?
 

1 more replies
Answer Match 62.16%

Hello All,

I just figured Id run my current situation by you all and see if anyone can think of anything else to try...

ill start with my computer specs:
amd xp 3700+
abit kn8 sli
2gb corsair ddr
maxtor atlas15k 36gb ( my boot drive and the problem here.. i think)
nvidia gs6800 ( normally 2 but just one now- you'll see)
dvd drives and all the rest of the stuff that doesnt really matter
so here's what happened- computer has been running flawless for about 4-5 mos.
Was on it all last night playing WoW and then i went to bed. my phone rang- i happened to look up and saw it BSOD and reboot.. so im like ok.. wtf?
as its rebooting i see nice green and gray lines all over the screen.. ok great so my vid cards are effed up... ok
i take out one, put the sli card in thats needed, and same green lines. Put back the othe 6800gs and then its fine. Ok so vid card #1 is bad.. no problemo- ill just run on one card and RMA this sucker.
SO i boot up to Win xp (sp2) it finds theres only one card.. yada yada.. ok we're disabling SLI and rebooting.. fine.
As its rebooting, I figured id put the side back on so I hold down the power button to shut it off. - i wasnt looking at the screen, but it was pretty late into the boot so im pretty sure the OS was loading at that point.
I put the side back on, reboot and then the system hangs ( does not freeze) aftter seeing nothing in the cd and trying to boot to hard disk.
I shut down, checked and made sure nothing came loose.. everythi... Read more

More replies
Answer Match 61.74%

Hello, My WS external hard drive mini usb connector fell off.

Iv'e tried to weld It back to the usb adaptar on the external hard drive, but without succssess.
thus Iv'e totly dissconnected the usb adaptar from the hard drive and tried to connect It directly to the pcs motherboard via a SATA connection.
The Drive shows up on my computer as D: and seems to be empty...
From what Iv'e read from the web, WD drives could It be the encrypted, In that case how do I deal with It?
If you know somthing that might help, It'll be great.

Please help the info on this drive Is very important

More replies
Answer Match 61.74%

I connected a Sata III 240G SSD drive to my computer as an extra drive and it prevents Windows from booting from the other main "C" boot drive. The bios boot sequence is configured correctly. The system hangs on a black screen with a dash. The bios can see the SSD. I can also boot into other programmes from a CD like Aoemi backup or disk genius etc and they can read and copy partitions from the Sata III. Is there anything I can do to be able to boot into Windows and use this Sata III SSD drive?

Kind regards
Chris

A:Connecting a Sata III SSD drive prevents Windows 7 From Booting

Was there another disk in the machine that this SSD replaced by chance?

1 more replies
Answer Match 61.74%

I installed a IOCrest Sata III 6GB PCI Express Card into my "Dell Inspiron 560". I installed the necessary drivers, as per the instructions that came with the controller card. It is now registered as a: "Marvell 92xx SATA 6G Controller" under Storage Controllers section in the Device Manager.
Here is a link to the card: SYBAUSA - SI-PEX40064 >> 4-port SATA III PCIe, x1, Revision 2.0, (Full & Low Profile); Marvell Chipset

I do still have 3 drives connected to the motherboard -- SATA... 'AHCI'. Assuming I get this card working. I was planning on moving two of those drives over to the new reportedly 'faster' card. My motherboard is only 'SATA II'. This is with the idea of not using my motherboards Sata Connectors anymore.

However the moment I plug in a new SSD drive or any other drive into the device with a 'brand new' SATA cable. Windows becomes stuck at the start screen. I get 'Starting Windows'. But no swirling logo. I tried letting it sit for about 10-15 minutes.

But - The Bios Post screens do recognize the SATA drive, and it's size as 450GB. (That is when I attempt to connect it) Or any other drive I attempt to connect to it.

I've tried going into the BIOS, and seeing if there were any settings to mess with. The A06 Dell-Inspiron bios is rather limited.

When stuck: The only recourse I had was to 'unconnect the Sata-cable'...Then hard-turn-off, and then turn-back on. Then Windows starts normally. I haven't tried any Safe-Mode s... Read more

More replies
Answer Match 61.32%

HI,

I purchased an adapter on Ebay that was supposed to allow me to connect my ide hard drive to my sata mobo connectors. My mobo has primarily sata but it has one ide which is already connected to my ide hard drives.

I have tried everything I can think of. connecing this and that, reversing connections, nothing workd. The instructions I was given were awful and the person I purchased is not helpful in answering questions. He hasn't responded.

Once connected I can't get it to show up in the bios The hard drive is an IDE Seagate 400gb drive. I am connecting to a sata connector on my mobo. I already have two other sata devices connected, they are two dvdr's .

My computer specs are listed above in the computer icon. The converter I purchased is listed here:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300473666570&ssPageName=STRK:MEWNX:IT

Is there a trick to doing this?

Thanks.
 

More replies
Answer Match 61.32%

Anything to know?

http://www.maplin.co.uk/Module.aspx?ModuleNo=36036

Thanks.
 

A:Solved: Connecting an IDE slave drive to SATA motherboard, with converter kit

8 more replies
Answer Match 60.9%

Hi, I was wondering if it was possible to clone a SATA hard drive with Windows XP to a USB hard drive, and rather or not if Windows XP would work well on the USB hard drive after it was cloned from the SATA hard drive. The USB hard drive would be the only hard drive used after the SATA hard drive with Windows XP was cloned to the USB hard drive.
 

A:cloning SATA hard drive with Windows XP to USB hard drive

6 more replies
Answer Match 60.9%

A friend of mine has asked me to transfer some music and picture files from his old IDE hard Drive in a HP Pavillion System, to his new SATA hard drive in his new Dell System, it sounds like it should be a fairly simple process, but my question is, what is the best way to just copy these files and not the entire hard disk?
 

A:Need help transferring files from IDE Hard Drive to SATA Hard Drive

6 more replies
Answer Match 60.9%

Hi. I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one? Any help would be appreciated. Thanks in advance.

A:How do I transfer files from bad sata hard drive to new hard drive

You could make your own external HD, & than copy/paste over.
http://www.sevenforums.com/hardware-...ard-drive.html

4 more replies
Answer Match 60.06%

Hi,

I have a similar problem, I have an Intel mother board - dg965wh and after installing windows xp - i see that error in scsi/raid host controller issue.

I've tried installing the storage matrix driver that comes with the mother borad disc, and the same driver from intel support site.

No luck...

problem still exist - I don't have raid/scsi on my system, but I don't like to leave it at that...

Any ideas?

thanks. Nitay

A:RAID/SCSI controller problem after BIOS update and re-imaging the system drive

Enter the BIOS at startup and check the controller's settings, the SATA/RAID contoller may be disabled there.

What's the message under device status when you double click the flagged device in the device manager ?

3 more replies
Answer Match 59.64%

Hello, my computer had locked up not to long ago so I had to give it a hard reboot. However, now it doesn't seem to recognize my main hard drive. I have 2 sata hard drives plugged in and it only recognizes my other one. If i set the option for "Configure SATA as" to RAID in bios, it shows it in the boot list but then throws a BSOD with error code 0x0000007b. Also it seems the same BSOD error happens when I set it as AHCI. Both hard drives recognized but BSOD thrown.When it has "Configure SATA as" IDE it only shows the other hard drive. Any ideas?

My System is:

ASUS P5E LGA 775 Intel X38 ATX
Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775
CORSAIR XMS2 DHX 4GB (2 x 2GB) 240-Pin DDR2 SDRAM
Seagate Barracuda 7200.11 ST31000340AS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive
 

More replies
Answer Match 58.8%

Hard Drive Installation Problem

I am trying to move a hard drive that was installed on an AMD processor
system to a computer with a Pentium 4 motherboard. The drive has Windows XP installed. What do I need to do to get this to work. Ultimately I want to install a new hard drive and move the files over from the old one that was installed in the AMD system.
 

A:Hard Drive Problem - Moving hard drive from AMD system to Pentium system

Should be a simple move

There is nothing uniquely different about a computer with an AMD vs Intel processor. The hard drive, which I assume is your only drive, is not a processor dependent peripheral. Bringing up a new motherboard, however, will trigger plug and play reinstalls for most of your peripherals--sound "card", video card, modem, e.t.c.

When you install a "new" hard drive you will need devise a cut over procedure. Usually, what I do is as follows:

- Install the new drive as a slave drive, keeping the old drive (i.e. C: ) as the master. The new drive will have no partitions and will not be formatted. Jumpers will have to be set on each drive to accomplish this.

- Using Partition Magic, or a similar utility, copy the primary partition from C: to the new drive which will now assigned drive letter D.

- If you have other drive letters in use, and you intend to retire the old drive, copy each letter to the extended partition on the new drive. If you intend to keep you old drive as a slave drive you can leave the additional drive letters alone.

- After all of the copying is done you must now reverse the master/slave jumpers on each drive. Your new drive will be drive C, your old drives primary partition will become drive D.

Until everything seems to be working OK for a week or two I usually "hide" my old primary partition, which is now drive D. You can then either delete and reformat the old pr... Read more

3 more replies
Answer Match 58.8%

Dell Dimension 8400 (about 3-4 years old). Stock SATA 160gb hard drive crashed (got the blue screen, all the codes, etc.) Took it to a computer place, they also said the HD crashed. I have bought a replacement 250gb SATA HD - attached the two inputs to the back (one thin and ling, one thin and short) and all I get on boot up is a couple of chirps and the screen says "Drive 1 (and 2 and 3) Not Found: Serial ATA, SATA-1" and repeats for drives two and three. The drive is warm, it's being accessed (it's humming), but I've also tried a third 160gb drive, same thing. I even replaced the original drive back in and the same thing - not even the blue screen and error codes any more.

Went to F2 set up, set to auto detect, all (SATA) drives sets to 'on.'

I'm computer literate, but not a techy or anything.

Totally lost now. Please help.

emsguy4you at aol dot com
 

More replies
Answer Match 58.8%

Can anybody talk me through installing a slave drive on my gateway gm5483e motherboard model 945gct-m3 made by elitegroup also known as ECS
 

A:windows Vista sata hard drive slave drive

plvness,

It should be as simple as installing a couple of cables. Hopefully you've got a nice flat cable either with the new slave drive, or a spare with the motherboard: it's normally red, but can be other colours, about 1cm wide and 1mm thick. That needs to be plugged in between the drive and one of your SATA slots on the motherboard. They'll normally be black, and unlike most, will have a slight 'L' shape to them. If you get a torch on your motherboard, you should see SATA1 or SATA2 written very close to them. If you've already got a SATA drive, then it should be easy to spot, so just use the second port.

When you start the machine up, go into the BIOS by pressing the appropriate key (it should come up with a screen just after displaying what graphics card you have / testing memory, telling you what key to press - normally F1, F2, F12, Esc or Del),

Then find your way to the 'Boot Order' section (sorry, not sure quite where it'll be for your chipset - but it'll be either on the first screen, or more likely a menu off of it), and make sure that it's still on your CD/Floppy/original drive first and hasn't swapped to your new SATA (it shouldn't have done, but some prefer a SATA drive by default to an IDE).

Any probs or questions, please come back. You'll do fine!

Rich.
 

2 more replies
Answer Match 58.8%

What is the difference between these three connections? I was looking at SCSI hard drives, and they seem to run faster than the IDE and the SATA hard drives. Well I don't want to put it in those words, but the least amount of RPM for the SCSI hard drives is 10000RPM. Is SCSI better than SATA?
 

A:Ide, Sata, Scsi?

There are some advantages to SATA such as smaller cables for better air flow, hot swapability in some systems, no confusing jumpers. At this time the speed difference between SATA and a new good IDE drive isn't that great. In the future SATA drives are supposed to have transfer rates of 600MBps.

While SCSI drives have at least a theoretical speed advantage as well as other pluses compared to IDE or SATA drives, most of these don't matter to the average user. Your basic motherboard doesn't come with a SCSI connector so that means an add in card.

The mechanical "innards" of all these drives are basically the same.

If your motherboard comes with a SATA connector a SATA drive is about the same price as an IDE drive and probably worth getting. No real reason to get a SCSI drive.
 

3 more replies
Answer Match 58.8%

Okay I have a question

I have some SCSI drives. My current system now only has SATA. so is there anyway I can hook them into this? Or is there anyway I can pull some DATA off of the drives? Thanks
 

A:SCSI and SATA

Sure, you need to buy a scsi control card with the correct pin config. Note these are not cheap; newegg has some for around $170 and up so you need to decide how much you want the info on the drives.
 

1 more replies
Answer Match 58.38%

I have a Dell Vostro 200. It has a hatachi 80 GB harddrive. It has no OS installed. I want to switch it with a 1TB hard Drive. 1st does it matter who the manufacter is? Dell wants WD. I want Seagate. And do I just load the XP Pro disc in and start? Oh, I don't believe it has ever been used. It was supposed to be a vista...yuck!
 

A:Is it hard to just replace a SATA hard drive?

ynotbme said:





1st does it matter who the manufacter is? Dell wants WD. I want Seagate.Click to expand...

Brand names are irrelevant especially when you are installing your own OS.




ynotbme said:





And do I just load the XP Pro disc in and start?Click to expand...

That would be the idea if you have it set to boot from disk in the system BIOS. The CD/DVD must have first priority over the HDD to boot.
 

2 more replies
Answer Match 57.96%

Hi, Is this possible? I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.

I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in. I'm pulling my hair out here!!!

My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have win7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)

Help!!

A:Install Windows 7 with Sata Hard Drive and IDE DVD ROM Drive

Have you checked out all of our Questions list ?


Questions to use for help with Installation Issues


One of my favorite tips is to pre-format the HD on another computer to the partitions that you want for the new install on the new computer. Sometimes SATA drivers are required during install either from Disc or USB flash drive containing the correct Sata drivers needed.
Also check your Bios setting for AHCI, SATA, IDE.

9 more replies
Answer Match 57.96%

Hi Everyone,

I just bought a 1.5TB Seagate SATA HDD Which I will be using as a data drive. I have my Primary 320gig sata hd which i use for windows. Now when I go to install the 1.5tb Drive, it detects it on first boot in the bios. when it trys to boot, it hangs on a black screen and doesnt move. When I go to restart, the 320 Primary Drive dissapears and only the 1.5tb drive is visable.

So what I've tryed to do is ive disconnected the 1.5tb drive, i left the 320 drive connected and it booted up fine. got into windows and worked as normal. but when I plugged in the 2nd drive it doesnt boot up. and when it doesnt boot, you restart and the 320 dissapears. I've also ghosted my 320gig drive to the 1.5tb drive. My 320 contained 2 partitions (C: for windows and D: for data) So atm im using my 1.5tb drive like my 320 with the C and D. But would anyone know the issue why I cant have both drives in there.?

Here are the troubleshooting steps I took

1) Changed SATA Cables
2) Changed the sata order (Plugged primary in SATA 2 and DATA HD in SATA 3 to see if the ports are faulty
3)Took out the IDE CD-ROM
4) Tryed to mess around in the bios and nothing worked.

Also using an ASUS P5ND mobo with lastest bios update.

A:Hard Drive Dissapears after installing 2nd SATA Drive

What is the power supply like? Make sure the power cables are on a different branch, if possible.

Perhaps the PSU isn't sending out enough power for both drive on a single cable?

Just a guess.

9 more replies
Answer Match 57.96%

I have a Dell Dimension MCE 8400 that I ordered with a single drive. In retrospect I should have ordered it with 2 drives and without MCE but that is another discussion. I am wanting to install a new OEM WD Cavier SATA 160 with dual boot operating systems on the same drive but partitioned, XP Pro and MCE. I have installed the WD drive as the second drive (in position 1) and made a partition of 40 GB. The drive is seen by the system. I reboot the system and go into setup, disable the Maxtor SATA drive (one delivered with system and in position 0) change the boot order so it boots from CD, save the changes. I boot the system with the Win XP Pro CD, and in the FDD I have WD SATA drivers. The system boots, I hit F6 and it looks as though it is reading the SATA controller drivers. Needless to say the system doesn't recognize that a hard drive is present. Please help!!!!! If anyone has any ideas or suggestions it would be greatly appreciated.
 

More replies
Answer Match 57.96%

In my system Maxtor SATA 200GB with Windows XP SP1 is installed on MSI KT4ultra motherboard.

In the device manager, under Disk properties I have found two options.....(attaching image) please tell me what these mean and by checking will improve my performance or anything.
 

A:SATA SCSI Properties

6 more replies
Answer Match 57.96%

I recently purchased a new Dell 8400 with a 40 GB SATA drive. I want to put my old hard drive (Quantum Fireball) SCSI drive into my new machine so I can use it as a storage device and, most importantly, access its files. I've noted that the new SATA drive has the small data serial cable (4 pin?) that is attached to the motherboard (bay 0). My older SCSI Quantum Fireball has the long (15 pin?) data connection. In order to add the SCSI Fireball as the slave, is there an adapter I can purchase to connect to the 15 pin SCSI Fireball to the 4 pin bay (bay 1) motherboard of my new Dell 8400?

Is any of this possible? I'm sort of a novice and may not have phrased my question correctly.

Sure could use some advice!

RAB757
 

A:SATA HD and SCSI HD compatability

8 more replies
Answer Match 57.96%

Hey guys, big problem. Well, for me it is. I've got a 200GB SATA drive. Connected to a SATA card in a PCI slot. BIOS reads the card, and detects the drive. Great! Load Windows - nothing. Device manager shows the host card under "SCSI and RAID controllers" as working properly, and it even shows the drive too under "Disk Drive" (as a SCSI device). But in "MY COMPUTER" there's no drive! I'm running Windows XP Pro and have all the updates, have updated my BIOS and Firmware on everything, all the latest drivers, yada yada yada. Any ideas?
 

A:Sata/scsi Problem!

Have you partitioned and formatted the drive?
 

5 more replies
Answer Match 57.96%

I just purchased a new ASUS P5AD2-E Premium motherboard and I'm about to connect my hardrives.

I have a new Maxtor Diamondmax 10 160GB SATA 7200 RPM drive and a Quantum U160 SCSI 10k RPM drive.

Which should I go with? I'm assuming the SCSI will be faster, but will it be much faster? Since, using SCSI will take some work off the CPU...is it worth it? will I notice much performance difference?
 

A:Question about SATA vs SCSI

Hi
I would use the sata drive for apps and storage and the scsi for os.
If I didn't have to add a sata adaptor to get sata running, that is.
The scsi will have far less latency than the sata drive, so it should give a snappy response to user input when used as the os drive.
 

5 more replies
Answer Match 57.96%

i was looking on ebay to get an idea for prices of a new internal hdd and noticed that there are different kinds. im guessing that these are types of connections. im not sure what ones im using but i think they are IDE(the flat, grey cables?). i was just wondering if someone can point me in the right direction.

my motherboard is a gigabyte RZ series 8S661FXMP-RZ.

are any of these types faster than others? or any benefits or anything?

any help is much appreciated.

cheers.
 

A:what type og HDD do i need? IDE, SATA, SCSI?

Your mobo supports ATA-133 and Serial ATA-150.
 

1 more replies
Answer Match 57.96%

I'm planning on buying an ASUS P6t Deluxe Mobo http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4268650&CatId=4068

and bunch of other good stuff like 1600 mhz ddr3 triple channel ram. Is it okay to purchase 1600mhz whih is the fastest the mobo can support and then overclock it? will it not work because the mobo limit is 1600mhz?

also whats the difference between scsi and sata hdd? I'm thinking about getting a 15k rpm scsi hdd because i dont want my hdd to limit my performance, because i have a spare sata hdd (7200 RPM) hanging around that I can use instead. but since im building a gaming pc wont the sata stump performance? I dont want to invest ina raptor hdd, because SCSI is more cost efficient and much faster with 15k rpm. is this abad idea? should i stick with sata? scsi would my my primary hdd, but i dont mind only using the hdd for games (if thats possible, i can power up both hdd's one with my OS and the other for games?)

does the ASUS mobo above have NCQ? how do i find out?

PLease help before Black friday!!!
cheers
 

A:SCSI vs SATA and Ram questions.

9 more replies
Answer Match 57.96%

hey,

Along with my new computer system i'm going to get, I was looking into storage.
I figure I'll get a 120gbSATA 7.2krpm drive for main storage... but also..

a ~18.6gb 15krpm ultra160 scsi drive to have JUST Windows XP (and maybe some other essentials for quick startup) on it. 3.5ms (theoretical) seek seems pretty nice for just an operating system.

Is this really as good as it sounds? Thoughts? I'm sure this has come up in the past.

thx
-daniel
 

A:scsi advantages over sata

You may want to go to www.storagereview.com to compare the speeds of the two drives. Those 15000rpm SCSI drives are super-fast, for sure.
 

2 more replies