Tech Problem Aggregator

Problem with Kensington SD400V USB Docking Station

Q: Problem with Kensington SD400V USB Docking Station

Hello,

i have this little thing and I connected it to my Lenovo notebook, but i dont have internet connection nor any image on monitor. Mouse, keyboard and headphones work fine.

After much effort, I found some driver (although it says that it dont need any installation to work) and I managed to get image. But, problem with ethernet connection remained. When I plug in the cable, niether the led on the dock interface light nor the one on the switch...
Friend that gave me this says that it worked ok on his macnihe.

What can be the reason for this?

A: Problem with Kensington SD400V USB Docking Station

7 more replies
Answer Match 80.64%

Hi!
I have a Latitude E7740 that runs Ubuntu Xenial (16.04). I dock it to a "Dell EURO2 Advanced E-port II" docking station. 
If I boot it in the docking station, everything works fine, and I find all my two DVI-connected monitors. 
However, if I undock, then put it into the dock again while running, it fails to enable the screens. I'm using a script called autorandr for switching between display modes - it uses xrandr. It tries to run:
xrandr --output DP1-1 --gamma 1.0:1.0:1.0 --mode 1920x1200 --panning 0x0 --pos 0x0 --rate 59.95 --reflect normal --rotate normal --output DP1-2 --gamma 1.0:1.0:1.0 --mode 1920x1200 --panning 0x0 --pos 1920x0 --rate 59.95 --reflect normal --rotate normal
But the X server responds with:
X Error of failed request: BadMatch (invalid parameter attributes)  Major opcode of failed request: 140 (RANDR)  Minor opcode of failed request: 21 (RRSetCrtcConfig)  Serial number of failed request: 48  Current serial number in output stream: 48
Running this exact command after booting in the dock is doing the right thing, but after undocking then docking, it doesn't work.
Any ideas here? I have updated to the latest BIOS version.
Problem also reported in launchpad with lot's of debug info, here:
bugs.launchpad.net/.../1585884
Autorandr script is here: github.com/.../

More replies
Answer Match 80.22%

I have a Dell Inspiron 1525 laptop running Vista Home premium
Intel Core Duo 2 CPU T8300 @ 2.4 gHz 4 gb RAM
all software updates are current.

I have a Kengsington Notebook expansion dock with Video #33367

About a month ago my computer started acting scary. I would come to the computer and it would be in what I assumed was "sleep" mode, I would push the power button and nothing would happen. I would hold down the power button trying to force a reboot and nothing. I disconnected eveything thing, unplugged it and re-plugged ... nothing. I unplugged everything again and in desperation took out the battery and put in back in and bingo it started up. I re-hooked everything and went on my merry way. Sometime later, bang it happens again. I tried the same corrections and they worked. The THIRD time this happend I left OFF the DOCKING STATION and it has not happened again.

Any ideas? Does Vista have docking station issues? Is this a lousy docking station? Does anyone recommend a good docking station. I really want a docking station.

Thanks!
 

More replies
Answer Match 79.38%

The PC in question is a Dell Latitude D620. When off the docking station, the screen display is normal, however when it's hot docked, or cold booted from the dock, the screen displays only 1/4 of the screen, however it shows the entire image. It's hard to put into words for me, it's displaying the entire desktop, same resolution, however the image its self is maybe 4 inches. I did fix this problem on my laptop by updating drivers, however I would have to explain this process over the phone as I am a support guy, and if it doesn't work, then I'm back to the beginning. Has anyone else experienced this, or am I the only one with the off the wall calls..
 

A:Odd Laptop docking station problem

nevermind, it's fixed. the person who is using the laptop forgot to mention they adjusted the resolution, and it's a widescreen monitor, so it had the black bars.. amazing how people forget the details...
 

1 more replies
Answer Match 79.38%

I have noticed a continuing problem with using our Pro Book 640 laptops and Elite Book 8460 and 8470s, when docked in docking stations and sharing keyboard, video and mouse through Belkin 2-port KVM switches.  The problem is that the keyboard and mouse will sometimes just quit responding, although the lights are on, indicating they are connected.  A number of techniques are tried to get the functionality back, including uplugging power from the KVM and plugging it back in, unplugging the keyboard and mouse from the KVM, and rebooting the laptop. Any one of these may or may not solve the issue.  My question is, has anyone else experienced similar issues when using docking stations in combination with a KVM? Thank you.TJfromVA

More replies
Answer Match 79.38%

Hi
I have bought Gold Touch HDDS-U3 docking station, I plugged both usb cables to the computer (one to SSUsb port and one to regular port), waiting for 30 minutes while it was turn off (for battery charging). After that I insert a 3.5' HDD and turn it on. Nothing happen. there is no red or green light and the device doesn't appear in Disks Management.
How can I make it work??
* I have windows 10
Yoav.

A:Docking station detection problem

UPDATE: now I can see a new disk in Disk Management, but it say "no media". I tried to change the letter but it didn't help.

1 more replies
Answer Match 79.38%

I got this message on my computer right before it froze and shut down:

"You have inserted a module into the docking stations modular bay, but this module is not supported by your docking station... should remove now.." Not sure how it ended, didn't write the whole thing down and then it went of the screen and everything was frozen.

Now when I turn it on it will run for a while but then freezes and after a long while shots off. If I try to turn it on soon after, it wont even start, the light just comes, it starts but then shuts down.

Its a Dell Latitude D510 and I have XP, can anyone help? That message means nothing to me, I don't know what a module, docking bay or station is and I haven't inserted anything in a long time.

A:module, docking station problem

no help? :(

1 more replies
Answer Match 79.38%

Hey all-

I have a Dell Latitude D800 that I use with a docking station. Everything has been working but occasionally when I put the laptop into the docking station and power up, the external monitor will not come on unless I open the lid of my laptop. When I close the lid of my laptop, the system goes to standby and the external monitor goes out. I went into the power options and changed the option for when the laptop is closed to "Do Nothing". I would like to be be able to keep it on Standby like it had been working originally. Any ideas why this may be occurring?
 

A:Problem with Laptop and Docking Station

standby mode is known to cause system issues (instability, currupt files, screwed up settings). I wouldn't use standby anymore if I were you.

To get your old settings back in order, run system restore and choose a restore point prior to when the issue started happening. (then you should disable standby mode so that that doesn't happen again)

also... check your display settings, there may be an option for primary monitor default when docked.
 

1 more replies
Answer Match 78.54%

Hi,

Got a weird one.

I had an old Toshiba t900 which died recently. it was on a small network and was also connected a HP Laserjet 6P/MP postscript printer. Most printing was done via the network to this printer. the printer was actually installed as a laserjet 6L because otherwise the driver sent everything via postscript with took for ever (well graphics did) and frequently failed with a "not enough memory error"

I have replaced this with a Tecra M10 (no parallel port) and a docking station which has a parallel port.

I did install the laserjet 6P/MP postscript driver and it all worked fine (except of course for the speed and memory problems mentioned above).

I then deleted the 6P/MP device and installed the printer as a 6L (as before) but when I tried to print a test page it did not send anything to the printer and reports a device error.

Ive uninstalled, re-installed, rebooted etc but made no impact. The only thing that is slightly odd is that after deleting the devices and rebooting the sometimes reappear suggesting maybe I have not got rid of them completely

If I start from scratch (no printer visible) and install the printer (replace current driver) as a 6MP it seems to install OK (except that Under printer->Properties, the panel is blank)

But when I print a test page, nothing happens (no lights flash on the printer) and a yellow triangle appears. The print queue simply says error - printing

Any suggests as to what I need to do to get this fixe... Read more

A:Printing problem through docking station to LPT1

OK it was tedious but I got there.

Delete all printers and keep deleting and rebooting until they have all gone (there must be an easier way?)
Plug in the printer and reboot the computer so it installs OK as 6P/6MP Postscript
Check it does actually work!!

Go to devices and printers
Take the installed working 6P/6MP Postscript
Right click, Printing properties
Advanced
Select a driver from the drop down list (6MP in my case) I guess these drivers were there from previous efforts so if the right driver is not there you may have to install it and then start from the beginning

Change the share name to avoid confusion
Go to the other PC
Install a network printer
Select the one you have just renamed
Test it and Message 'Unable to access printer'!! b*g*e*!!

Probably some garbage left over from previous efforts (now deleted)so
Reboot and try again.
Now it works.:-)

And now perhaps I can get on and do something useful!!

1 more replies
Answer Match 78.54%

We have around 100x E7440's and on most of them we have the same problem. 
When the machine is operated on battery then the lid is closed it goes to standby/hibernation (this is not the problem).
But when the machine is docked into the port replicator / docking station and switched on, as soon as Windows starts, it goes to Blue Screen.
OS: Windows 7 Enterprise 64 bit. 

More replies
Answer Match 77.7%

Hi, My laptop updated to Windows 10 OS and now my docking station is not working on it anymore as the current update only supported Windows 7 or 8 Version only. Need help please.  Thanks,chelle

More replies
Answer Match 77.7%

Hello, I have a problem with docking station for Elitebook 2560p.Mini-jack port is not working in docking station but it works in notebook. When I plug the cable from simple 2.0 speakers in audio port from notebook (PC is plugged into docking station) it works. But when I'm switching cable to port from docking station it's not working. I thought that regular audio port (in notebook) should be disabled when notebook is plugged in docking station. I saw only drivers for USB port for docking station. I could not find drivers for audio port of docking station. Please advise how to make it work.  Best regards,Patryk

A:Elitebook 2560p - docking station problem with audio

Hello Patryk, Your EliteBook is a Business model.  Your issue would be best answered on the HP Enterprise Business Community Forum Good luck!  

2 more replies
Answer Match 77.7%

I'm using win 7 Pro, SP-1, Dell Vostro 64 bit laptop, a Toshiba Dynadoc and the dynadoc utility_II and a secondary monitor, and a MS wireless Mouse 5000.
The wireless mouse works fine when hooked up to the laptop at home with both laptop and monitor screen viewing well.
The problem is when traveling, unhooking the docking station and only using the wireless mouse with the laptop, the laptop does not recognize the mouse. The wireless sender attached to the laptop shows light indicator activity and the mouse lights up when manually activated, but doesn't recognize the wireless sender and shuts off.
I've tried unloading the dynadock utility program and changing control panel mouse settings. With system check the mouse seems to be recognized, but it doesn't reconnect to computer.
Any ideas ?
 

More replies
Answer Match 77.7%

Dear Sir,
I use a  XPS 15 9550 machine with a TB15 Docking,  I have installed all your new drivers as stated on the website with regards to  TB15 and xps 9550, but after rebooting the machine i get all the connections but within 2 - 3 minutes, only dispaly remains, rest all connections, LAN, Audio, Camera, wireless dongle usb fails, and i have to restart the machine.

I has become the most troublemost situation wherein we cannot work like this. Wheneever we call yur help desk for the same, they always avoid this situation, by suggesting to transfer the line to somebody else and then the other person also does the same.

More replies
Answer Match 76.02%

Hi guys,

i am experiencing some problems with the 2 mentioned laptops.

The 1st one is:
I bought a used 7020 to replace the broken screen of 7200. After disassembled the screen, I noticed that the connectors have the same number of wires, but one of the terminal of the 7200's screen has a larger socket. "no problem" I thought, and with patience I picked up the cable of the 7020 adapter an put it into the 7200.
But when i turned it on i saw only colored lines and squares :S :S
If you want i can provide the PN, if it could help...Even if i check the compatibility before order.

2nd problem:
Portege 7200 recognize correctly the docking station, while the 7020 emit some beeps before boot, and obviously it doesn't work with him. I checked on toshiba's site and the dock would be totally compatible!

And for last... Where can i find bios updates?

Sorry for my bad english, i hope that someone could help me!

regards,
Francesco

A:Compatibility problem with Portege 7020 / 7200 CT display & docking station

Hello Francesco

You will be really lucky if anyone here can help you with these old notebook models. I am pretty sure they are about 10 years old.
Without maintenance manuals and enough knowledge is not easy to help you with this display replacement.

This issue with docking station can be related to defective hardware. Both notebooks are so similar and both of them can be used with this docking station. How you can be sure hardware is top on 7020?

BIOS updates are available on http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp but as I can see for Portege 7000 there is no BIOS update, just for 7020.

If you want you can contact nearest Toshiba service provider. they have maintenance manuals for this old notebooks and they can help you offering exact info about parts you need.

3 more replies
Answer Match 69.3%

Gibt es eine Dockigstation zu diesem Modell wenn ja welches modell 

A:docking station

Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
 

German: HP Kundenforum
Spanish: Foro de usuarios de HP
French: Forum des utilisateurs
Portuguese: Fórum dos usuários HP
Chinese: ??????????
Korean: HP ??????
Thank you for your understanding

1 more replies
Answer Match 69.3%

I'm looking for a CD player / docking station - all in one. Tired of having all these gadgets. Does anyone make such a thing?
 

A:Docking station + CD all in one

Hi and welcome to TSG?

Are you talking about a docking station for an iPhone/iPod or some other brand and model of device?

FWiW, here is a link to an Clock Radio/CD Player Dock for iPod/iPhone:

http://www.amazon.com/Sharper-Image-EC-B160-Player-iPhone/dp/B00303G9MM
 

3 more replies
Answer Match 69.3%

1. Can I get any docking station inplace of my damaged pro x2 410 keyboard?2. Apart from pro x2 410 keyboard is the any other keyboard I can use?

More replies
Answer Match 69.3%

HD Docking station

Hi,

I bought an external HD recently & transferred from my PC's HD a 50GB backup file but, when I tried to see the stored file it did not work & had to return it.

I would like some advise on the item below, if anyone is using it.

If I put a HD in it can I transfer files from my PC to it?

Generic USB2.0&E-SATA To 2.5"/3.5" SATA Multi-Function HDD Docking Station All In One Card Reader
 

A:HD Docking station

Yes.
 

1 more replies
Answer Match 69.3%

I purchased a refurb'd IBM THINKPAD 570. It has the docking station. I have never worked with a laptop before and do not know anything about them. My question is: If I am not using the CD/DVD, or floppy, what, if any, are the advantages to keeping it docked? If I play music in the Windows Media Player, does the docking station improve the sound quality?
 

A:Docking Station

...the docking station is just there so you don't have to screw around with cables every time you get into work. They don't improve anything except time management.
 

1 more replies
Answer Match 69.3%
Answer Match 69.3%

Hi does anyone know of a usb 3.0 docking station for 3.5" and 2.5" sata drives that runs off the usb power? ie no power supply thanks.

A:usb 3.0 docking station

I would think that 3.5" drives would require more power than USB could provide. I don't recall seeing many of those. 2.5" laptop drives should be okay with just USB power.

3 more replies
Answer Match 69.3%

I'm looking for a relatively inexpensive docking station for my dell 1420 laptop and didn't have a clue where to start. Well, I did start looking but everything I found was well over $100 dollars so I chose to ask the forums where everyone knows about computers.

I want it to be able to hook me into my 17in lcd, printer, mouse, keyboard, ethernet (internet), and power.

Thanks! I look forward to your suggestions.

A:Looking for Docking Station

Can anyone even point me in a direction?

2 more replies
Answer Match 69.3%

I am buying  HP ZBook Studio G3 Mobile Workstation.  I already have HP 230W Advanced Docking Station. will it work with this laptop.

More replies
Answer Match 69.3%

File Transfer - Help Wanted

It will be from the old computer running Windows XP to a new computer running Windows 7.

The old computer has files which I have accumulated over a number of years, it is a mixture of those used rarely, used frequently and junk.

The chances are some of the files will never be used again, but they just might be wanted at some future date. I am therefore reluctant to scrap anything. Neither do I want to put a lot of possibly unnecessary files on the new computer.

I need to be able to search the old hard drive and recover a file if it is wanted.

The old computer is about 9 years old and is slow and may not be worth upgrading.

I now have two computers and one monitor and I am not sure what would be the best route.

I have not used a Docking Station before but thought this could be a possibility, on Amazon I found:

DUAL 2.5"/3.5" IDE SATA HDD HARD DRIVE DOCK DOCKING STATION IDE SATA eSATA USB ALL IN 1
By DX-MALL

Any ideas would be a big help. Thanks.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz, x86 Family 6 Model 15 Stepping 6
Processor Count: 2
RAM: 3070 Mb
Graphics Card: NVIDIA GeForce 6200 LE, 512 Mb
Hard Drives: C: Total - 232048 MB, Free - 150174 MB; D: Total - 6404 MB, Free - 1505 MB;
Motherboard: ASUSTek Computer INC., Basswood
Antivirus: PC Cleaner Pro, Updated: Yes, On-Demand Scanner: Disabled
&n... Read more

A:Docking Station

7 more replies
Answer Match 69.3%
Answer Match 69.3%

I have a Dell D620. When i connect to my docking station. I can not access my my wireless, air card or lan connection.

A:Docking Station

I have plenty of these docks in my company, and have had a few god bad. That would explain the LAN net working, but your wireless and air card shouldn't be affected in any way. Are you saying that if you are connected to your network by wireless, and you dock your laptop...then connection drops and the card disables?

3 more replies
Answer Match 69.3%

Any one please advise the right model of docking station with product id and serial number for HP ZBook Studio G3 Mobile Workstation regardsSankar

More replies
Answer Match 69.3%

Hello Everyone,
I could use a little help solving this problem. I purchased a removable hard drive that I patitioned to save my master hard drive image with Norton Ghost. Well I now have the image on what I will call the G: drive and removed the IDE ribbon from the master hard drive and pluged into the removable hard drive hoping it would boot and this would be all over but when I boot I get a message NTLDR is missing. Am I missing something here?
Any help would be greatly appreciated.

Thanks in advance,
Chip
 

A:Docking Station

I had posted a question about a docking station and posted to XP/2000 forum.............wrong forum sorry.
please accept my apology,
Chip
 

1 more replies
Answer Match 69.3%

Best docking station doe model 15-g071nr

More replies
Answer Match 69.3%

I put my (new) Elitebook 8460p into a (new) HP 90W Docking Station. The docking station does not have a lock. I turned the laptop off but it won't eject from the docking station. The eject button only goes down about 1/8". Does anyone know of a way to release the laptop when the docking station eject button does not work?

A:docking station

I too am having the same issue.  Is there a solution to this?  I'm ready to yank the laptop out of the docking station...

5 more replies
Answer Match 69.3%

Hi, Any one can please advise the suitable model of Docking station for HP ZBook Studio G3 Mobile Workstation.And I have docking station with sl no- CNU302Z0V6 , PRODUCT ID- A7E32UT#ABA  . Can I use the same docking station for the  HP ZBook Studio G3 Mobile Workstation ? if not please clarify the reason for that . Urgent  reply shall be highly appreciated. regardsSankar

More replies
Answer Match 69.3%

HI there - I currently use a HP 840G1 model laptop at my workpace, with a Hp 2013 Ultraslim docking station. I have a docking station at home and work, and would like to find a laptop for personal use that can also be docked on this docking station - can anyone tell me what laptops I should be looking at? Thanks Anna

More replies
Answer Match 69.3%

Hello,Customer of mine has a  Yoga Laptop (ThinkPad) - Machine Type 20C0, Model 20C0S19900, do you make docking stations for that laptop?  If so do any of the docking stations have Dual DVI ports? Thanks,Joe 

More replies
Answer Match 69.3%

Using a T430 and trying to get 2 monitors to work. I can get them to mirror but not able to extend my desktop to both.Was wondering if a docking station woud do the trick . Plus im running Redhat open client so not sure if there are any copatibilty dependancies. Please suggest

More replies
Answer Match 69.3%

Is there a docking station compatible with the 450 G2 that anyone is aware of?

A:450 g2 Docking Station

Hi, It does not have docking port therfore any USB port replicator will do. There are many USB 3.0 port replicators around, depending on how do you want to use the dock, the following one would be more suitable for your machine:               http://www8.hp.com/us/en/products/oas/product-detail.html?oid=5278439 Regards.  

1 more replies
Answer Match 69.3%

Hello Does anyone know which docking station is compatable for a G50-80? Thanks Jill

More replies
Answer Match 68.46%

I have a brand new E7250 Laptop and my wireless connection works great when out of the docking station but fails when I dock.  Any thought?

More replies
Answer Match 68.46%

Just got docking station, D9Y32AA, "2013 UltraSlim Docking Station". Connecting computer seemed to be straightforward and simple enough. Just wondering if there are any hidden capabilities inherent in the device that I might exploit. I am not considered a "power user" though I do use most of the MS Office Apps to include PowerPoint, Outlook, Excel and Word. Also, will turning off the power at the Docking Station keep the computer's internal battery from charging? Is there danger in the battery being damaged by staying connected to the docking station power too long? Thanks for your thoughts, CW

More replies
Answer Match 68.46%

My son just purchased this laptop and now wants to get a docking station for it. Any ideas what will work with this unit?

http://www.newegg.com/Product/Product.aspx?Item=N82E16834230171
 

A:Solved: Docking station??

Most USB docking stations should work, but this model doesn't have a dedicated docking port interface that's generally only found on business class laptops. Asus does, or did, have a docking station but it seems it may be discontinued: http://commercial.asus.com/product/detail/49

Newegg has a lot of universal USB docking stations that should work: http://www.newegg.com/Store/SubCategory.aspx?SubCategory=537&name=Replicators-Docking-Stations

Depending on what he really needs, a USB hub may suffice.
 

2 more replies
Answer Match 68.46%

am trying to find out if i have an issue with my laptop
Manufacturer: compaq
Model: presario 1075
OEM Number: 261831-001

or my port replicator (docking station)
2904 port duplicator
docking station
261845-001
when my laptop is pluged into the docking station display is not working all of the time.(not hooked up to an external monitor)
every thing else is working

how do i check the laptop port, or can a selftest be run on the docking station?
 

A:laptop docking station

There is only one way (assuming you don't make the things) to test this.

Hook up the laptop to another one (or hook up someone elses laptop to yours) - there is no other way to test something like this.
 

1 more replies
Answer Match 68.46%

I am looking for a docking station for my Lenovo Z710.Are there one compatible with this model?Thanks

More replies
Answer Match 68.46%

I bought an extra docking station for my EliteBook 745 G3. It was advertised as a D9Y32AA but is really a D9Y32UT. Googled it and most are saying it's the same but one difference I see is that the AC adapter plugin has a larger plugin to the dock than the one I got with the computer. Didn't see that mentioned elsewhere. Is it ok to use the dock with the different plugin?

More replies
Answer Match 68.46%

Hey everybody

I am wanting to get a good Laptop Docking Station that I can have at the house to easily plug my laptop in when I get home, so I can use it on my Vizio TV

I've been checking around, but can't find one with a good rating from CNET, and just wondering if anyone had any ideas.

My laptop is a Dell Inspiron 9300. Thanks
 

A:Looking a Laptop Docking Station

bump
 

1 more replies
Answer Match 68.46%

I bought hp envy m7 notebook. It is not compatible with connector for my  docking station, HP xb3000 notebook expansion base. Is there an adapter for the expansion base to the Envy notebook? Is there a docking station for the HP Envy notebook?Thank you,Bryan










Solved!
View Solution.

A:docking station connector

Hi, The Envy m7 notebook does not have docking port therefore you have to use USB docking port. There are many USB docking ports around such as:    http://www.amazon.com/HP-Replicator-Docking-H1L08AA-ABA/dp/B008KMDVME (HP store says there are 11 products but the site is down, you can wat to get a full list       http://store.hp.com/us/en/mdp/accessories Regards.

3 more replies
Answer Match 68.46%

Searched site for info on HD docking station. No threads answered my questions.

Even though I received some wonderful help from some of you recently, I couldn't get rid of a virus on an older computer. I've decided to buy an HD docking station and hopefully transfer some of my needed and wanted files to another HD. This HD is brand new with nothing on it. Will I be able to transfer files to it if it doesn't have an operating system?

I'm definitely not going to do a mass transfer, I'll pick and chose .jpgs, videos and documents. No .exe programs what-so-ever.

Will this way be safe to keep the pesky virus on the old PC? Once I have everything I want off the old PC, I'll give it a complete restore with the original Windows.

I'd appreciate any help.

Thank you
Tony

A:Need info on HD docking station

Hello Tony

Do you remember the name of the virus and where it was...

What is or was the name of the Anti-virus on the computer that has the virus.

Do you have malwarebytes if not I would download it on the old system and run a full scan as it can pick up and delete virus's that others miss, here is the link and chose the free version..
Malwarebytes : Free anti-malware, anti-virus and spyware removal download
Try and get rid of the virus this way and then transfer the items you want...

12 more replies
Answer Match 68.46%

I'm thinking about getting a docking station for my laptop, but I'm running into some confusions. First off, I don't know if my laptop is a ZBook 15 or a ZBook 15 G2. I think it's a ZBook 15 because it says "HP ZBook 15" on the bottom without the "G2" suffix. Also, it was issued to me by my university in August 2014, a month before the ZBook 15 G2 was announced. So unless my university was able to get early access to the G2's, it must just be a ZBook 15. Second, I don't know which docking stations are compatible with the ZBook 15. And I don't know what the merits of each of these docking station models are. I use a second monitor a lot with my laptop, which connects by VGA. So that's one thing I'd want the docking station to be able to support. Other than that I'd just want a bunch of USB ports, an audio port, and other stuff that I think is standard for a docking station. So, what advice can you give me?

More replies
Answer Match 68.46%

I am trying to find some info on a ThinkPad docking station - 02K8660 Type 2631. IBM only lists the 02K8662. I have a T23 and an X22 and am afraid to dock and boot for fear of frying one or both. Any ideas where I might find documentation on it, and what model ThinkPads it's compatable with?

Thanks.
 

More replies
Answer Match 68.46%

Hi,
I just installed Windows XP Pro on a laptop here at work that we just bought. Everything went smooth execpt when I plug the network cable directly into the laptop I can not go on the internet, it goes to the classic "This Page Cannot Be Displayed" page. When I plug the network cable into the docking staion and then put the computer on the docking station it goes on the internet with no problems. Let me also say that when the network cable is plugged directly into the laptop it can goes anywhere on the network fine. I've even pinged computers in our New York City location with no problems. Lastly I took the computer home last night and pluged it directly into my DSL router and it when on line with no problems. I'm puzzled please help?
 

A:No Internet Unless I'm on the Docking Station?

http://winhlp.com/wxnet.htm
 

1 more replies
Answer Match 68.46%

I have a docking station for my HP Elitebook 8440p. Can this docking station be used for my new Zbook if I upgrade the power block to the required wattage (230W)?  The Zbook fits perfectly into the 8440p docking station. I am having an issue with the  Zbook recognizing a second monitor through this docking station - how do I fix this?

More replies
Answer Match 68.46%

does anyone know which docking station has the capability to plug in two monitors for the envoy15t laptop?

More replies
Answer Match 68.46%

Hi,
I currently have the PR02X Docking station together with a Latitude E6530, and am planning to purchase a Precision 7710, will this docking station fit (and work) on it if I use it with the more powerful psu ?

More replies
Answer Match 68.46%

Just purchased a Thinkpad P50 and Thinkpad Ultra Docking Station before I head off to college in the Fall, and having the issue of the docking station not charging my laptop while it is running. If the laptop is closed down, it will charge the laptop as indicated by a little green light by the charging port, however as soon as I open the laptop and start doing anything, it will not charge anymore. The docking station is working fine otherwise, as indicated by an external monitor, keyboard, mouse, and hard drive all plugged into the docking station, not into the laptop. This is a brand new machine, I bought it and have had it for less than 10 days now. I spent alot of the morning on call with a Lenovo technician but couldn't resolve the issue; he recommended that I send the laptop back to them so they could replace/fix the motherboard.

More replies
Answer Match 68.46%

Greetings,
We are using Dell latitude laptops and Dell docking stations at our office and we are facing issues with working on the docking station frequently. i thought one cause could be compatibility issue and i tried checking which docking station is compatible with which laptops, but to my surprise the information online is very confusing. Different answers on different sites for the same request. Below is a table listing the docking stations and laptops we have at our office and appreciated if anyone can help me in identifying the compatibility of the items.

 
Model
DPN
E4300
E4310
E6320
E6330
E6400
E6420
E6530
E7240
E7440
E-Port
K07A
WV7MW A02
 
 
 
 
 
 
 
 
 
PR03x
T4HD7 A01
 
 
 
 
 
 
 
 
 
E-Port Plus
K09
FFCV6 A00
 
 
 
 
 
 
 
 
 
PR02x
F310C A06
 
 
 
 
 
 
 
 
 
E-Port II
PR03x
6TJ57 A01
 
 
 
 
 
 
 
 
 
E-Port Plus II
PR02x
12TFY A00
 
 
 
 
 
 
 
 
 

I look forward to your prompt reply,
Thanks,
Daniel

A:Docking Station Compatibility

 
Model
DPN
E6420
E6530
E7240
E7440
E-Port
K07A
WV7MW A02
 
 
 
 
PR03x
T4HD7 A01
 
 
 
 
E-Port Plus
K09
FFCV6 A00
 
 
 
 
PR02x
F310C A06
 
 
 
 
E-Port II
PR03x
6TJ57 A01
 
 
 
 
E-Port Plus II
PR02x
12TFY A00
 
 
 
 

1 more replies
Answer Match 68.46%

The notebook itself and the power cord work fine.  The base/keyboard was subject to water damage and stopped working.  Is there an option to purchase a new base for this?  If so... where?  

A:where do I purchase a new docking station

Hi, I don't know where you are therefore all I can do : please look at the following manual, page 19:                http://h10032.www1.hp.com/ctg/Manual/c03581901.pdf (a) Select the right one,(b) Contact HP store(s) in your country to order one or use part number to order elsewhere. Regards.

1 more replies
Answer Match 68.46%

I have a client that has a hp laptop and accompanying docking station. The usb ports on the docking station suddenly stopped working. I replaced the docking station with a brand new one, worked for about 2 weeks, then crapped out again. While in the docking station, the hp usb ports work fine, only the usb ports on the docking station are out of order.

JohnWill gave me a usb hack about a year ago, and I ran that, and while it then recognized the the 'new hardware', it stated I had to reboot; rebooted, and nothing showed up.

Any ideas? The hardware is not local, but if push comes to shove I can get the make and model of it.

v
 

A:docking station/usb ports

16 more replies
Answer Match 68.46%

Since it has become clear that I cannot trust the sales people at Dell, I will see if someone on this forum can recommend a docking station or port replicator that will work with the Inspiron 1525, XP Pro, SP3. The Dell folks had me order a Kensington SD 200V, with option for dual monitor. After hours of trying to make it work, the folks at Kensington told me that it is not compatible with XP SP3.

I would love it if I could find a docking station like my old IBM Thinkpad, where even the power for the laptop was taken care of at the docking station. Guess that's not possible with a Dell.

I do want to use an external monitor, speakers.

Any suggestions, even for somewhere else to search?

Thanks,
Barbara
 

A:Recommendation for Docking Station?

I am not seeing anything like that for your model.
With all the connections that are shown for your model
at the dell website,it's probably not needed.
You have connections to hook up an external monitor,
or even an HDTV by vga or HDMI.
I imagine you could connect speakers to one of the headphone
jacks,but might want to use a USB sound card instead to
keep the wires out of the way.
Sorry I couldn't find exactly what you were looking for.
 

3 more replies
Answer Match 68.46%

Hello all. Please help! I have a Dell inspiron 700m running WinXP connected to a Belkin F5U216 docking port, VGA pass through to a full size monitor, full size USB keyboard. The serial and parallel ports on the docking station do not work. If I go to device manager there is an error , failed to load, whatever you call it next to USB-serial controller. I don't know if it has anything to do with the docking station but I tried re-installing the driver for it to no avail. The Belkin tech support people haven't been of any help. Does anyone have any ideas about this. Much appreciated.

Regards,
Andy
 

More replies
Answer Match 68.46%

I'm desperately looking for a dock for my new Spectre, since it only provides USB-C. I've researched and learnt that the Spectre is not compatible with generic USB-C chargers, and only charges on HP USB-C chargers. Is there a compatible dock from HP in the works, or is there a third party one?

More replies
Answer Match 68.46%

Hi,got X220 and it's docking station P/N: 0B67692 with DVD burn.my problem is that the lan only support 10/100mb looking for docking for X220 support 1Giga lan port. Thanks...

More replies
Answer Match 68.46%

Hello all,
Forgive me if this is in the wrong thread but I have a problem.

MY Advent Monza N2 running a 64-bit version of Windows 8 Pro is connected to a Plugable Technologies DisplayLink certified laptop docking station which in turn is connected via VGA lead to a Logik L22FED12 1080p HDTV. I cannot get my laptop to switch to the 1920x1080 resolution required for full screen viewing. At the moment my screen resolution is at 1440x900 (the highest available at the moment) and there is a 2-3 inch wide black square around the functioning OS.

Any ideas? I have tried forcing the resolution using PowerBar with no luck.

Thanks,
George

More replies
Answer Match 68.46%

Upon a re-boot today, my ibm t41 wouldn't re-boot while it was in the docking station. It goes to the IBM splash screen and them hangs (won't go into the bios either). Out of the docking station, everything is fine. It was in the docking station when i initially tried to re-boot. Any suggestions...lenovo support is little help beyond buy a new docking station and see what happens.

Thanks for any suggestions
 

A:won't boot in docking station

Update the system BIOS to the latest version?

Disconnect everything possible from the dock in case it is something of the devices that is bad.
 

2 more replies
Answer Match 68.46%

I have been having issues when I dock my Latitude D630 into the port replicator. The issue is that sometimes the external monitor is not detected and therefore, doesn't display my screen. I tried using the fn + F8 to extend it but in the display properties, the monitor isn't even recognized as being there. I was initially having intermittent issues with keyboard and mouse so I swapped docking stations and now this came up. 

Any suggestions what I can look at? Could it be something to do with the hardware profile?

Thanks

A:Docking station issues

I don't know if you ever got an answer, but three years later the same problem,I have two monitors attached to the docking station, I disconnect the laptop.  Come bck and attach the laptop and it does not detect the monitors.  Using Windows 10.

1 more replies
Answer Match 68.46%

Hi, I have a ProBook 6470b and a 640 G1 that I use with a HP 2012 90W docking station at home.  Just recently I've noticed that when I shut down the notebook as the power switches off the cooling fan starts at quite high speed and will run continuously until either the notebook is removed from the dock, or turned back on. If you remove the notebook and re-dock it straight away the while the fan is running after shutdown the fan will stop and restart.  If you undock one notebook when the fan is running as above, dock the other one, then swap them back again the fan does not restart, and also when you first dock the notebook while sleeping or powered down the fan does not start. Is there something that I have set in error to cause this behaviour?  It doesn't seem to affect the operation of the dock.  The change seems to have started since changing my old VGA monitor for one connected using the DVI-D port.  The other monitor is connected by Display Port. I have tried cleaning the connectors on both the dock and the notebooks.  Any help is appreciated.

A:HP 2012 90W docking station

twocantech wrote:Hi, I have a ProBook 6470b and a 640 G1 that I use with a HP 2012 90W docking station at home.  Just recently I've noticed that when I shut down the notebook as the power switches off the cooling fan starts at quite high speed and will run continuously until either the notebook is removed from the dock, or turned back on. If you remove the notebook and re-dock it straight away the while the fan is running after shutdown the fan will stop and restart.  If you undock one notebook when the fan is running as above, dock the other one, then swap them back again the fan does not restart, and also when you first dock the notebook while sleeping or powered down the fan does not start. Is there something that I have set in error to cause this behaviour?  It doesn't seem to affect the operation of the dock.  The change seems to have started since changing my old VGA monitor for one connected using the DVI-D port.  The other monitor is connected by Display Port. I have tried cleaning the connectors on both the dock and the notebooks.  Any help is appreciated.Have you tried performing a BIOS update on each of the notebooks?  I'd do that first to see if there's a difference.

1 more replies
Answer Match 68.46%

For some reason my CD-ROM doesn't want to work it seems like the drivers are installed but it gives an exclamation mark. I tried all sort of things like installing it and reinstalling it and I tried getting updates from Microsoft Updates. Also I tried getting it from Sony.com but it seems that since my notebook was made for XP it doesn't have any drivers for Vista. So I will have to find them myself somehow. I have Windows Vista Home Basic. My notebook is the Sony PCG-R505ESP. I really need help on this please since if I don't make my CD-ROM work then I can't install any programs that uses a CD.

I can say that Win XP and 2000 has no problem with the CD-ROM only Vista has this problem but it might actualy be the driver but I don't know.

On the device manager it says "This device cannot start. (Code 10)"

I also looked to see if there is any filters on the regedit but there wasn't any so that is strange.

This is the model of my CD-ROM

"Sony i.LINK CD-RW DVD-ROM Drive IEEE 1394 SBP2 Device"

Just to let you guys know that my notebook is a docking system so the CD-ROM is attached to the dock.

Everything else seems to work perfectly fine but just the CD-ROM doesn't work at all.

Thank You​
 

A:Docking station CD-ROM drive

I do know that when I talked to someone they said it was just the driver is not the version that the CD-ROM normaly works on meaning I might have to put the driver that comes with XP. The driver on Vista might be newer than the XP one so it doesn't work right since normaly my notebook came with XP.
But my questions is where can I get the XP driver?
 

2 more replies
Answer Match 68.46%

Running a new HP EliteBook Folio 1040 G3 with Windows 10 64bit. I do not get any audio when connecting external spealers to the dock. If i connect directly into the jack on the laptop the external play audio fine. I have uninstalled and reinstalled the drivers numerous times.

More replies
Answer Match 68.46%

I need a docking station for my HP probook 6450b (90 W). What's the model of docking station for me?The user guide I downloaded doesn't say anything about this.Thank you. Andrea

A:docking station hp 6450b

Dear Customer, Below is the details:Product Number : VB041AA     Description : HP 90W DOCKING STATIONSpare Part-688169-001   You can order the part from HP parts store using the link below. Or purchase the part from any computer store. Link: http://hp.care/2eyb3Bh or http://www8.hp.com/us/en/contact-hp/ww-how-to-buy.html   Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 

1 more replies
Answer Match 68.46%

Hi
We are running more than200 dell computers in our company. lately we purchased E7240 for some users but it looks like the AC adapter does not work with the Dell E-Port docking station we have and that cause the USB hubs not to function at all.
currently the workaround is to plug the AC adapter to the laptop instead of the docking station. is there anyone who had the same problem ? can give more information ?
our BIOS is updated to the latest version. also a message comes up when the ac adapter connected to the docking station before the windows boot up saying the ac adapter won't charge :()
Appreciate your help.
 
 

A:E7240 and docking station

Hi 1erans,
I’m sorry to hear that, thanks for the post though! I have not seen this issue reported by other E7240 users so I would like look into this for you. Could you clarify a few things:
 
Are all 200xE7240 systems are having exactly the same issue on dock or if the problem changes system to system?
 
Are all systems using the same model AC adapters / Batteries?
 
When USB fails, are both system and dock USB ports not functioning?
 
Have you been able to note the exact error message seen on the system pre OS?
 
Thanks,

37 more replies
Answer Match 68.46%

The network card (Broadcom NetXtreme Gigabit Ethernet) on the docking station for my Z60m went out (does not show link at all, always shows unplugged). I tried removing/reinstalling with the most recent driver, but no luck. Is there any way to active the internal NIC while plugged into the docking station? That would at least give me a work around, although slightly inconvienant. Thanks.

More replies
Answer Match 68.46%

Hi All,

Just recently purchesed one of the All in 1 HDD Docking caddies from Ebay, but need some expert advice.

I am connecting a 200gb IDE HD which is being recognised as a removable disk, but not as a seperate HD.

Not sure if this is a driver issue but have installed everything on the disk.

To see the exact type of model I am using type: All in 1 HDD Docking - in google and its the first youtube result red front with a black body.

Regards,

Jon

A:External All in 1 HDD Docking Station

SEAGATE is the model of HD, 200gb IDE, power sounds when plugging in, therefore something is live.

1 more replies
Answer Match 68.46%

My desktop speakers worked plugged into the Dell docking station using VISTA. Now, unless it's a total coincidence, when I installed Windows 7, the sound only comes through the laptop speakers --- unless I plug them directly into the laptop, then they work.

Dell Latitude D830 with Dell Doc that came with it.

Any known issues or ideas???

Thanks

Tim

A:Docking station no sound

Probably just needs the correct driver installed for the dock.

4 more replies
Answer Match 68.46%
Answer Match 68.46%

Hi there,  I have a Thinkpad A31 - 2652 with Windows XP (SP3) and I would like to get a docking tray with the ability to have dual VGA monitors (both external monitors).  I understand that the "ThinkPad T, A, and X Series Dock" has both a VGA and a DVI  I/O ports.  But, here are my questions, what kind of DVI is included with this dock?  Would it be possible then to get a DVI - VGA adapter and attach a monitor to it so the diplay is extended to the second monitor, not just replicated in the second monitor? Thank you.  

A:Thinkpad A31 Docking Station

I have a T-30 XP Pro that I used a type 2878 Docking Station for a while.  Yes, I put on a DVI adaptor and it looks like you can do 2 x AGP.    

1 more replies
Answer Match 68.46%

I have two users who both Dell Latitude laptop computers. When they power up the computers, they are able to set their graphics to the desired level (1280x760). If they power up the computers while on a docking station they are able to set the graphics to a different level (1024X768) and this works fine.

The problem they have is if the machine is already powered on (1280x760) and the dock the system, the graphics on the external monitor will go to 800x600, totally disregarding what they had set the graphics for. They are able to change it back and it is fine again.

Why does this only occur when the machine is powered on already and they are trying to dock it? Is there some setting that needs to be changed?

I appreciate your help!!
 

A:Graphics with Docking Station

bump
 

2 more replies
Answer Match 68.46%

Has anyone tested some docking solution for Yoga 3 Pro? I need to connect one [email protected] monitor and one VGA (d-sub) projector, 4 USB 2.0 devices.(also LAN port and e-sata would be usefull for me, but not necessary) Is there some tested, goog working solution for this? And moreover one crazy questiuon: would be possible to use come wirelless option? wifi direct or bluetoth to conned usb devices and sound at least?Thx..  

More replies
Answer Match 68.46%

Is there a docking station that i can use with this laptop?

A:Selecting right docking station

Hi, It does not have docking port therefore normal USB "dock" can do:     http://store.hp.com/us/en/mdp/accessories-88342--1/docking-stations-142510--1 Please select the one with USB 3.0 and Dual display (or DisplayLink cerfified). You may use those options later. Regards.

1 more replies
Answer Match 68.46%

When I plug my laptop into my docking station before I've booted the laptop will lock up. If I wait until it's booted it works fine. I'm using VGA and HDMI cables to the 2 monitors but playing around with configurations of the monitors doesn't seem to matter.  It did work at one time but perhaps an update broke it. I've run the HP support tool to make sure I have the latest updates. Any ideas?

More replies
Answer Match 68.46%

Please advise quick response requested (ASAP)! Need to recover old hard drives from HP laptop, Dell desktop & Western Digital external drive. Must have IDE, SATA capabilities and reasonably priced. Would like to purchase a device that will allow me to transfer the old data to my new Windows 10 laptop with the cloud. Preferable so all my files can be stored in one location.

More replies
Answer Match 68.46%

I'll have my laptop in my docking station and then I'll undock it to use it somewhere else in my house and the last two times I did it I got this error message. It never happened before the last two times.....am I doing something that could hurt my machine?
---------------------------
Problem Undocking From Docking Station
---------------------------
You cannot eject your computer because the service 'VgaSave', which controls one of the devices in the docking station, does not support Plug and Play and cannot be stopped. Contact the manufacturer of the driver for an update.
---------------------------
OK
---------------------------
 

More replies
Answer Match 68.46%

I am curious if anyone has had experience with dell d/port docking stations (port replicators). I formerly used a dell inspiron 8600 with its corresponding docking station to connect to all my peripherals. I recently purchased a new Dell latitude d630, but didn't want to spend the extra money for a new docking station. The old one seems to work fine, even though dell doesn't say they are compatible. Does anyone know if there are any long-term detrimental effects to using a potentially incompatible docking station? Thanks in advance!
 

A:Docking Station Advice

The only problem I can forsee is that the connector pins on the docking station might not match the computer. Most newer laptops use 2 alignment pins to ensure the piece stays in the dock. If you can't get a good connection or see flaky things happening while the laptop is docked, but not while it's out, get the matching docking station.

As an alternative, Kensington offers a USB based docking station. It's not a true dock, but a stationary connector for your peripherals.
 

1 more replies
Answer Match 68.46%

I'm wanting a docking station for my HP Envy laptop that will charge my laptop as well. Is there such a device? I recently purchase a Targus USB dock and it doesn't reconginise my monitor nor does it charge my laptop so I still have to take my charger in and out as well as my monitor. Very annoying. Doesn anyone have any suggestions?

More replies
Answer Match 68.46%

Is there a compatible (preferably tested) docking station for the Yoga 13?Also, what is the maximum resolution the video card will drive on an external monitor? Will it do WQHD (2560x1440)?Thanks










Solved!
Go to Solution.

A:Docking station for Yoga 13

no replies...So does that mean there isn't one?that is a bit of a downer.Also, with regards to the max. resolution, surely that is a much more important feature to document on a laptop's specifications page, unlike rubbish like "onekey recovery", or the fact that it comes preloaded with a lot of bloatware like Accuweather.I assume that the lack of a display port will limit the direct connection to HDMI's maximum resolution of 1920x1200.Thus, the question about docking stations (or other USB 3 gadgets) that can support a larger resolution.

9 more replies
Answer Match 68.46%

I have a lenovo g770 laptop, and I need a docking station for it. Does anyone know what I should buy?
 

A:Solved: Docking station

12 more replies
Answer Match 68.46%

I have dell LD630 and i recently installed win7 32bit enterprise on it. everytime i slap my laptop into dock it doesn't recongize the USB keyboard and mouse. it search and then install the on laptop everytime i put on the dock.

thoughts?

yasir

A:USB issue with docking station

Sounds like the dock drivers you are using cannot be W7 compatible, that simple.

You'll need to check compatability and availability of driver updates with the maker.

1 more replies
Answer Match 68.46%

Hi, It does not appear there is a docking station for the HP Pavilion x2 12" Detachable 2in1 laptop.What are the alternatives for a docking station such that I can hook up my laptop to a monitor/tv, full size keyboard/mouse, etc. Also, aside from the HP Active Pen, what other digital pen/stylus are compatible with the Pavilion x2 12? Thanks

More replies
Answer Match 68.46%

hi
I have an ibm 760e thinkpad with a docking station type 3545-001. I need to reload windows back onto the pc via the cd in docking station. please can anyone tell me how I get the cd to work in the docking station and where I might find the driver for it. if I put the correct driver in a config.sys file will that do the trick?

thanks
[email protected]
 

A:docking station cd will not work......

solidone,

I'm pretty sure this will give you what you need.
Driver File Matrix
 

1 more replies
Answer Match 68.46%

I have an Aspire 1830-3595. Can anyone recommend a docking station that supports dual monitors? Regards,trs1010

More replies
Answer Match 68.46%

I have an home office and received a docking station for my laptop which I need help setting up since I have never done so before. I also need to network this computer to my home printer which is in another room in the house.

Thank you,
Susan
 

A:Laptop Docking Station

Hello Susan and welcome to TSG.

What laptop is it ? Please post the full details of the make and model, they will be on a label underneath.
 

2 more replies
Answer Match 68.46%

I was wondering if anyone has had any experience using a Non-Toshiba supplied "docking station" on a Toshiba consumer grade "Satellite" laptop ?

I had purchased one of Toshiba's PA3575U-1PRP dynadock U Universal USB Docking Stations, but found the video performance so bad that I returned it. Even non-movie type applications, such as loading web pages, were excruciatingly slow, choppy and painful. And yes, my Toshiba laptop is up to the task being a late model with Dual Centrino Core 2 processor / 2-GB RAM / 7200RPM drive / 128-MB of shared video.

I see where both Belkin and Kennington offer similar units. (Note, on the NewEgg site the Kennsington model is also rated as being very poor in video response as well !!) There may be others ?

What has been your experience and your recommendation ??

Ideally, I want to be able to connect my Toshiba laptop with a single cable and not have to mess around screwing in the monitor cable, along with plugging in the PS2 plugs for the mouse and keyboard. Something you have to do if you simply rely on just a USB port extender.

Thanks
 

More replies
Answer Match 68.46%

Can say an HP use any docking station or replicator for any HP if all things (ie: vga vs hdmi or PS2 vs USB) are equal? I am buying a new laptop and trying to decide between two. I have both a replicator and a docking station. I looked them up but can't find specs on models they work on so I am thinking they are open as far as spec are right.
 

A:Docking station/replicator

Are you looking them up on HP's website? I find it hard to believe that any HP docking station or replctr. will work with any HP laptop model. Check compatibility under HP
 

1 more replies
Answer Match 68.46%

I need to find a compatible docking station for my notebook.  Any suggestions? Thanks 

A:I need a docking station for my hp 15-g010dx

Yes HP no longer makes true "docking stations" for its consumer laptops. A docking station is a snap-down platform that provides power to the laptop and replicates ports and allows for expansion such as additional hard drives, etc. Best you can do is to use a USB 3.0 "port replicator" many of which come with video and all the ports you could want but do not power the laptop. You still need to connect an AC adapter directly to the laptop to use the port replicator.  There are lots of these on the market. HP makes one and others do, too. Post back if you need any help. Expect to pay around $100 +/- for one with video. https://www.amazon.com/HP-3005PR-USB-Port-Replicator/dp/B008KMDVPQ/ref=sr_1_1?ie=UTF8&qid=1475009377... If this is "the Answer" please click "Accept as Solution" to help others find it. 

1 more replies