Tech Problem Aggregator

Compaq Presario CQ61 backlight problem?

Q: Compaq Presario CQ61 backlight problem?

Hi,

I recently turned on my laptop and the screen was black. After a while when it booted up, the screen came on as normal and then flashed out about 10 seconds later. I can shine a torch on to the screen when it boots up and see windows and everything but it's obviously too dark to use. I replaced inverter and lcd panel but the problem remains...

How should I go about fixing this?

More replies
Answer Match 101.22%

Hello,
I have recently upgrade my OS from Vista to Windows 7 Ultimate by clean install method.
I think so far everything works except microphone which I solved by installing updates from windows update.
So my question is, Should I install some drivers or some updates from either compaq or hp sites or wherever also? Should I try to find drivers specefic for my computer or go with the drivers which came with windows 7?
My computer model is: Compaq Presario CQ61

Thank you very much!!!

A:Compaq Presario cq61

  
Quote: Originally Posted by jav


Hello,
I have recently upgrade my OS from Vista to Windows 7 Ultimate by clean install method.
I think so far everything works except microphone which I solved by installing updates from windows update.
So my question is, Should I install some drivers or some updates from either compaq or hp sites or wherever also? Should I try to find drivers specefic for my computer or go with the drivers which came with windows 7?
My computer model is: Compaq Presario CQ61

Thank you very much!!!



If HP/Compaq have the drivers for your PC, then yes.

4 more replies
Answer Match 99.96%

So recently the charger for my Compaq laptop has gone bust, and I need to know what charger I would need to buy. This has happened once before, and when I bought a new charger, the wattage wasn't correct for the computer, so that one broke too.

What I need to know, is the exact charger needed for this laptop, meaning the correct wattage for the computer. Links to websites where I can buy it would be greatly appreciated.
 

A:Compaq Presario CQ61 charger

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01966130&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=us&lang=en&product=4121166
 

1 more replies
Answer Match 99.96%

Recently my fan in my laptop was extremely loud, and the laptop was getting really hot. I proceeded to vacuuming my laptop and dust came out of it.

Somehow when vacuuming my fan, it broke.

Now it does not spin, and my laptop is silent.

Within 10 minutes of running the laptop it turns off; when it turns back on it says it shutdown to avoid over heating...

Any ideas, do i need a replacement, and should i take it to a computer place???

A:Broken fan on Compaq Presario CQ61

I suggest trying to blow out more dust. Maybe a dust bunny is preventing the fan from spinning.

If that doesn't work, the machine may need to be cleaned more thoroughly (disassembled). If that doesn't work, you'd need a replacement fan.

Take it to a shop, if you can't do it yourself, and you know a place that you can trust. (Preferably not Geek Squad at Best Buy. I've read few kind words about them.)

2 more replies
Answer Match 98.7%

The ownership of the above machine has been transferred to me.I wish to revert the laptop to the factory settings.The recovery options are not accessible. Not by uising the recovery manager accessed through the Windows interface, via the F11 options or through the startup screen.Windows 7 home premium came presistalled.Is there a means of obtaining the installation discs?The hard drive was replaced by the previous owner. Thank you for any help. 

A:Compaq presario CQ61-415SA Recovery

HP no longer has any Windows 7 based recovery disks for consumer laptops. There is a 3rd party market for recovery disks.  http://computersurgeons.com/p-19931-windows-7-premium-64b-recovery-kit-599363-001-for-compaq-presari... That is not precisely your model but is AMD so the motherboard is the same as yours and would work. If you are a little more adventurous and tight-fisted, we can walk you through a "clean" recovery using an OEM Windows 7 install disk and the drivers found on this site.  If this is "the Answer" please click "Accept as Solution" to help others find it. 

1 more replies
Answer Match 98.7%

I have a Presario CQ61. I believe it was released in 2009.  Although it's very old I was wondering if this laptop will have driver support for windows 10. There are none as of now but will there be drivers for this laptop in the future?  Thanks.

A:Windows 10 drivers for Compaq Presario CQ61?

I am also concern since i did install win 10 on my cq61-420us. The one concern i do have is my touchpad isnt not scrolling either up and down or side to side. the synaptic drivers that are provided do not work properly

9 more replies
Answer Match 98.7%

Hi,
I'm experiencing the BSOD on my Compaq Presario CQ61-401SA Notebook PC. I've followed the posting instructions and would be extremely grateful for any help
Thanks
Rich

A:BSOD on Compaq Presario CQ61-401SA

  
Quote: Originally Posted by lilp1976


Hi,
I'm experiencing the BSOD on my Compaq Presario CQ61-401SA Notebook PC. I've followed the posting instructions and would be extremely grateful for any help
Thanks
Rich



Several of these were blamed on ataport.sys. Some very old drivers need updating including your raid, storage, and others.

I would update the old drivers

Code:
iirsp.sys 12/13/2005 5:47:54 PM fffff880`01702000 fffff880`01713000 0x00011000 0x439f418a
nfrd960.sys 6/6/2006 5:11:48 PM fffff880`0191e000 fffff880`0192e000 0x00010000 0x4485ef94
adpu320.sys 2/27/2007 8:04:15 PM fffff880`0158d000 fffff880`015bc000 0x0002f000 0x45e4c6ff
adpahci.sys 5/1/2007 1:30:09 PM fffff880`01537000 fffff880`0158d000 0x00056000 0x46377921
arc.sys 5/24/2007 5:27:55 PM fffff880`01452000 fffff880`0146b000 0x00019000 0x4656035b
SiSRaid2.sys 9/24/2008 2:28:20 PM fffff880`01a00000 fffff880`01a0e000 0x0000e000 0x48da86c4
sisraid4.sys 10/1/2008 5:56:04 PM fffff880`01a0e000 fffff880`01a26000 0x00018000 0x48e3f1f4
adp94xx.sys 12/5/2008 7:54:42 PM fffff880`014bc000 fffff880`01537000 0x0007b000 0x4939bf42
lsi_fc.sys... Read more

3 more replies
Answer Match 98.7%

AC Adaptor has been replaced
DC Jack has been replaced

http://www.youtube.com/watch?v=DCHMUOoC2Ko&feature=youtu.be

Things I have tried.

1. Taking out battery and power lead and holding pwr button for 1min
2. Reseating ram
3. Taking CMOS battery out for 10mins
4. Removing Hard Drive

Any suggestions appreciated before I start to strip this laptop down again......

TIA

Zorg.
 

A:Compaq Presario CQ61 Power No Post?

9 more replies
Answer Match 98.7%

Hi, I am trying to re-install this for some one and it turns on with the message System Disable: 73827136 Can anyone advise me on the issue? Thanks











Solved!
View Solution.

A:Compaq Presario CQ61 System Disable

Hi, Enter  62785118 Regards, DP-K

2 more replies
Answer Match 98.7%

So my laptop's screen is black. I'm using my tv right now with it, it works fine hooked up to a TV. I've tried everything I know of. When the laptop first starts up, It flashes the red compaq screen, then goes black. Flashes the user login screen, then goes black 2 sec later. When I do the fn+f4, the screen flashes back on, everything looks cool, then 5 seconds later it goes black again. It's not just the light, it goes completely off. (Just on the laptop, external monitor works) I've tried restoring back to factory settings, recovery, and I'm not getting anywhere! I've even tried that black screen fix by Prevx. Oh and I also tried turning the laptop off, holding the power button, etc. It has windows 7. CQ61 I think is the model.
I wasn't really sure if this was the right place to post it, so sorry if I'm in the wrong section!
 

A:Black Screen- Compaq Presario CQ61

10 more replies
Answer Match 97.86%

hi all got compaq presario cq61 when imove the laptop screen i get picture etc but sometimes it goes off when moved and very dull but can still just about see whats going on .. could this really be a loose wire knowing how tight the wires normally are or an inverter problem please help
 

A:Compaq Presario CQ61 screen goes dull and on and off when moved

Sometimes the LCD inverter wires become loose or pinched in the LCD cover hinges
 

10 more replies
Answer Match 97.86%

Hello All,

I have recently purchased a Presario CQ61-410 US ( http://www.newegg.com/Product/Product.aspx?Item=N82E16834107043) and am now trying to install Xp Pro on it. I am having major difficulties.

After a lot of googling, I found these guides ( http://h30434.www3.hp.com/t5/Operating-systems-and-software/General-XP-Downgrade-Guide-for-HP-Laptops/td-p/83267, http://maxeasyguide.blogspot.com/2008/04/preparations-for-winxp-installation-cd.html). I tried both solutions to no avail; I would still get a blue screen after during the initial install. Then I realized I have the AMD chipset, and thanks to this thread (http://www.techsupportforum.com/f19/...en-422183.html) was able to find the Raid drivers, slipstream them with Nlite and begin. The SATA hard drive was readable, and the installation commenced.

Here, though, is the rub. I am able to get through the basic install screen (F8 I agree, partitions, etc) and through the first "GUI" install screen (Agree to EULA, "Your Screen May Flicker for a few Seconds" etc). However, after that install and when the computer restarts and goes to load XP, I get the XP splashscreen for maybe 1-2 seconds, then the system reboots. I have no idea why. I know the install I am using is solid (it is running tried and true on another machine), and I have tried making a second boot disk, but every time I encounter the same problem: splash screen for a second, then restart.

I am not concerned about the other dr... Read more

A:Compaq Presario CQ61 and XP Pro Installation - A Living Hell

So you are trying to downgrade a machine that shipped with Windows 7 to Windows XP ? If so, that would have been a better title to the thread, as downgrades are their own special set of problems.

It also would have been a good idea to note that this is a laptop.

Given that, I am having difficulty understanding why you would need "RAID drivers" for a laptop. Does this laptop have two hard drives ?

The compaq support site does not list any XP-specfic drivers for the hard drive or hard drive controller.

http://h10025.www1.hp.com/ewfrf/wc/s...1166&sw_lang=&

Have you seen this area ?

Also I'm a bit skeptical of your Driver Genius Pro software, and am wondering if that has been involved in the situation yet, and if it's a possible cause for problems.

Is this HD parititioned, with the Ubuntu O/S on one partition ? If so, it would be better to get XP installed on a single-partition drive, then make another partition for Ubuntu.

nLite is sometimes buggy, and while it is solving one problem, it could be causing another.

A bad/buggy optical drive can also corrupt system files which can cause an install to go bad.

HD's can come from the factory with errors & bad sectors. I would run HDD Regenerator (from Hiren's) to make certain the HD is good.

17 more replies
Answer Match 97.86%

Hi,

My name is Alison, I was trying to fix my laptop and ended up making things a lot worse!!

I ran DBAN and during the process i realized i have no way to reinstall Vista OS so i aborted the wipe after 10 or 15 mins into it.

Its a Compaq Presario CQ61. On the back of the L/T i have a sticker with a product key but when i purchased it i never got a CD for Vista. I dont have recovery discs either.

So like i said i stopped DBAN from completing the wipe however now when i turn the L/T on it says,

"NO BOOTABLE DEVICE -- INSERT BOOT DISK AND PRESS ANY KEY"

I tried doing System Recovery but the same message comes up... i also found a Vista Recovery online and burnt to cd-r but it stills says, "NO BOOTABLE DEVICE -- INSERT BOOT DISK AND PRESS ANY KEY"

Im not sure what to do to fix this issue... any help or advice welcome but please explain in details.

Is there a way to copy a different version of windows OS from a different PC and make that a 'boot disc' I dont really understand what a boot disc is...

Thanks in advance!

Alison

A:Wiped the hard drive now i have no OS (Compaq Presario CQ61)

Hi, Alison.

A boot disk is the hard drive which your PC boots from and starts Windows, but your hard drive has had the boot files and Windows (or some of it) wiped off it with DBAN. DBAN is used to securely wipe all data from a hard drive prior to selling it or otherwise disposing of it -- this prevents any data from getting into the wrong hands.

You will have to contact HP/Compaq and ask them if they can send you a set of Recovery CDs for your model.

Contact information for the USA: Contact HP - Phone Assist | HP

For the UK: Contact HP - Phone Assist | HP

1 more replies
Answer Match 97.86%

Hi,

My name is Alison, I was trying to fix my laptop and ended up making things a lot worse!!

I ran DBAN and during the process i realized i have no way to reinstall Vista Home Basic OS so i aborted the wipe after 10 or 15 mins into it.

Its a Compaq Presario CQ61. On the back of the L/T i have a sticker with a product key but when i purchased it i never got a CD for Vista. I dont have recovery discs either.

So like i said i stopped DBAN from completing the wipe however now when i turn the L/T on it says,

"NO BOOTABLE DEVICE -- INSERT BOOT DISK AND PRESS ANY KEY"

I tried doing System Recovery but the same message comes up... i also found a Vista Recovery online and burnt to cd-r but it stills says, "NO BOOTABLE DEVICE -- INSERT BOOT DISK AND PRESS ANY KEY"

Is there a way to copy a different version of windows OS from a different PC and make that a 'boot disc' I dont really understand what a boot disc is...

Im not sure what to do to fix this issue... any help or advice is appreciated if you could please explain with details that would be a big help to me.

Thanks in advance!

Alison

A:Wiped the hard drive now i have no OS (Compaq Presario CQ61)

Please do not post more then one thread about the same problem.
Wiped the hard drive now i have no OS (Compaq Presario CQ61)

Quote:




I ran DBAN




DBAN (Darik's Boot and Nuke) is a low level format utility. Once you start this, it begins to wipe the drive of your OS. Stopping it in the middle is too late. If you had just run System Recovery would have set your system back to Factory Defaults, but DBAN deleted that too. You cannot copy an installed OS and put it on a different computer. An OS has to be installed from a boot disc (a disc that boots the computer if the OS can't)
What is the Vista recovery disc that you have? Boot into Setup (Bios) and change the Boot order to be CD/DVD rom drive First Boot Device, Save and Exit. Restart the computer with the disc in and you should see the message Press Any Key to Boot From CD/DVD.If it is a Vista install DVD then you can reinstall your OS. If not a Windows disc, you can try contacting your computer manufacturer and see if you can get a Recovery DVD for your computer manufacturer Or get a Vista DVD from Ebay or Craigslist.

1 more replies
Answer Match 97.86%

Hey to all! Since my girlfriends cq61 died, and led blinking gives me CPU failure,  i would like to replace its CPU.I have already taken CQ61 apart and CPU inside was AMD Sempron M120. Since i am replacing it anyway i tought i would put something more powerful in. What CPU-s are supported by my model? I read in this thread http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/Compaq-Presario-CQ61-415sa-Processor-Upg... That M620 - Turion II Ultra @ 2.5GHz  is supported on some CQ61 models, will it work for me? Is that best i can do?   Best RegardsMix

A:Compaq Presario CQ61-420E0 CPU replacement/upgrade

Before you focus in on the CPU I will let you know that it is much more likely the problem is the motherboard than the CPU. 

6 more replies
Answer Match 97.86%

After rebooting my system I now come to a screen to enter system password. Only thing is.. I never set this and there is no way around it.I have tried the take battery out reset CMOS trick that used to work in desktops to no avail. this is the message I get after too many password attempts. system disable key 92931076











Solved!
View Solution.

A:Compaq Presario CQ61 BIOS Password Unlock

Chick try. 23699078 Use that code to go into the BIOS.Disable all passwords that are enabled.If asked for the CURRENT password use that code.If asked for NEW password just hit enter.If asked to VERIFY password just hit enter.Save and exit. REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

8 more replies
Answer Match 96.6%

Hi all,I have a Compaq Presario CQ61-310SV notebook that does not want to start ? the screen does not turn on and always remains blank. At startup, when I press power button:Lit only leds for Power, WiFi (orange color) and Touchpad;The fan turns on, but the screen remains blank;Caps Lock and Num Lock keys blink 2 times in a sequence;According to these data, I found that there was an error, indicating to failure of the BIOS. But, despite the fact that on the forum I found many of similar cases, no advice did not help me solve this error. So I decided to ask you for help, describing in detail what I tried hoping that you will point to my mistakes and help me to solve the problem.So:First of all, I tried to perform a hard reset by:Disconnecting the AC adapter, battery and all external peripheral devices;Pressing and holding down the power button for about 1 minute;Plugging the AC adapter back into the notebook;Trying to turn on the notebook;Also I removed the CMOS battery for a few minutes ? no result.Next, I tried to recovering the BIOS using key press combination «Win+B» hoping that my notebook has the emergency BIOS recovery feature enabled. But the notebook silently restarts automatically after few seconds after I released the power button. How I tried to do it?I turned off notebook and I unplugged AC adapter;I disconnected the battery and all external peripheral devices;I plugged AC adapter back into the notebook;Holding «Win+B» I pressed power button and I rel... Read more

A:Compaq Presario CQ61-310SV: BIOS corruption failure

I noticed that no one can/wants to try to help and I do not know why... If I did something wrong or you need more information about my problem ? please tell me about this and I certainly will update the post.

9 more replies
Answer Match 96.6%

Hi all, I'm new here, registered just to get help with my problem. I have a Compaq Presario CQ61-420US Laptop, it will be a year old at the end of April 2011. It has Windows 7 Home Premium 64-bit OS. Never had a problem with it till now. I am planning on doing a memory upgrade (currently has 3.0 GB DDR2 PC6400 in 2 slots (1gb + 2gb), ordered a 2.0 GB chip to bring it up to 4.0 GB total memory)

Anyway I wanted to make sure I could do the swap myself so I unplugged the power cord, took out the battery, unscrewed the panel on the bottom of the laptop case, found the memory chips, took out both chips very carefully, undoing the tabs holding the chips in, took them out, inspected them, put them back in the way I took them out, making sure the tabs on the chips were lined up, maing sure the contacts were making contact. Put everything back together, ordered the new 2GB memory chip.

Today I went to power up the laptop, battery in and power cord plugged in and everything lit up like normal except the screen never came on, the power button stayed lit, the network status light stayed on, the power indicator was lit, two white lights were flashing at the same time every 5 seconds though, which is abnormal, one at the top right of the keyboard which I believe is the Num-lock light and one on the far left of the keyboard which I believe is the Caps-Lock light. And thats it, nothing ever happens it never turns on (blank screen) even after 20 min's. SO I held the power button down til... Read more

A:Compaq Presario CQ61-420US not booting/blank screen

I've got it figured out, I just took the 1GB RAM stick out, since I won't be needing it once my new 2 GB stick comes in, and it booted up just fine, tested the same stick in both slots to make sure one wasn't bad and its all good now.

1 more replies
Answer Match 96.6%

hi all got a post further down explaining lcd cable was no good so got another plugged it all on but now nothing coming on is there any button or anything i can do or is it another bad cable
 

A:Compaq Presario CQ61 screen LCD cable change but not working

hi all as in previous tpost further down i explained screen comes on fully when little movement of lcd cable just where it plugs to mother board so got another wire but does same thing so now know it wasnt wire so thinking what inverter or lcd backlight please help as i do not want to buy 1 then its the other is the only way finding out by buying part and testing. thanks in advance
 

33 more replies
Answer Match 96.6%

Compaq presario CQ61-223TU running Vista SP2 32bit, need ios for free upgrade to windows 7

More replies
Answer Match 95.76%

Hello,

When I power on my Compaq Presario, the screen remains black, the key next to the power button is orange, the Caps Lock key is blinking and a light blinks above the "home, end, num lock keys", in the upper portion of the keyboard. I have tried taking out the battery, unplugging the power and holding the power button for 60 seconds, before trying it again, and I am not getting anything...HELP!!
 

A:Compaq Presario CQ61 Black sreen-orange button next to power

Try re-seating the Ram. If that doesn't help remove the Cmos battery for a few minutes then put it back, it looks like a silver coin and should be visible near the ram.
 

1 more replies
Answer Match 91.14%

Hello.. first post here. I suspect the backlight has gone on my sisters Compaq Presario F700 laptp. I am wondering how hard it is to replace. Also this is what I have found for a replacement.. correct? or do you have other suggestions.
Thank you for your time.
 

A:Compaq Presario F700 Backlight

7 more replies
Answer Match 89.46%

hey, i know someon posted a similar thread to this but no one was responding on his.

so i have a compaq presario f500 that wont bring a backlight on the screen and i can tell from the lights just keeps looping the boot cycle. is there a way to make a second moniotor the default monitor via some hotkey? actually thats all i have to ask.
thanks
 

A:Compaq Presario, no backlight on screen and boot loop

can you describe your problem by providing more data? you mean, that your laptop won't start, or it starts, but you see no backlight? by default, all these quanta models are show welcome logo 2 external monitor during start. and by default, all these model with nv-go6150 northbridge have dead videochip/northbridge
 

6 more replies
Answer Match 84.42%

i have athe same problem i got presario cq61 and the error is 55067138

More replies
Answer Match 74.34%

Hi  everybody!I've got a Presario CQ61 and it doesn't turn on anymore. The battery has been always low... so I used it always connected to the Power Supply... Anyway it doesn't turn on now... I've tried without battery, to swap the RAM memory, to use just a single bank of RAM and then the other one. I've tried to disconnect the wifi module... I've checked the HD and backuped it (it works)...  One thing is... when I connect the plug of the power supply.. the led turns on for just for 1 second and then it turns off... I'm sure the battery doesn't work... I've read the forum and it seems a motherboard fault... but my question is... can it be possible it's a matter of battery... I mean does the notebook needs a working and charged battery (or at least with a % of charge) also connecting it with the power supply  to turn on???  so Could it be a problem of the 0% charged battery? Thanks in advance!RegardsAlex











Solved!
View Solution.

A:presario cq61 won't turn on

Hi Alex, Unfortunately it's probably an issue with the system board - the notebook should work just fine when the AC Adapter is connected even with the battery completely removed. Regards, DP-K

4 more replies
Answer Match 74.34%

Hi  everybody!I've got a Presario CQ61 and it doesn't turn on anymore. The battery has been always low... so I used it always connected to the Power Supply... Anyway it doesn't turn on now... I've tried without battery, to swap the RAM memory, to use just a single bank of RAM and then the other one. I've tried to disconnect the wifi module... I've checked the HD and backuped it (it works)...  One thing is... when I connect the plug of the power supply.. the led turns on for just for 1 second and then it turns off... I'm sure the battery doesn't work... I've read the forum and it seems a motherboard fault... but my question is... can it be possible it's a matter of battery... I mean does the notebook needs a working and charged battery (or at least with a % of charge) also connecting it with the power supply  to turn on???  so Could it be a problem of the 0% charged battery? Thanks in advance!RegardsAlex











Solved!
View Solution.

A:presario cq61 won't turn on

Hi Alex, Unfortunately it's probably an issue with the system board - the notebook should work just fine when the AC Adapter is connected even with the battery completely removed. Regards, DP-K

4 more replies
Answer Match 74.34%

BIOS error has occurred. built-in program does not help (win + b). I need a program for usb drive. But I can not find the program. Help restore my computer. serial: CNF9409D1C product:VJ506EA#ACB P.S. I do not know much English. I used Google translator. P.S.S. thank you in advance

More replies
Answer Match 72.66%

Hi
When I turn on the laptop the fan runs, the caps and numbers flash not nothing on screen. I've tried linking it with TV to make sure it wasn't the screen had gone but nothing. Any advice would be much appreciated. What I really want is to try and get photos from the computer so will consider anything as last resort.

Thanks
 

A:compact presario cq61 black screen

8 more replies
Answer Match 71.4%

Hello All,

I have recently purchased a Presario CQ61-410 US ( http://www.newegg.com/Product/Product.aspx?Item=N82E16834107043) and am now trying to install Xp Pro on it. I am having major difficulties.

After a lot of googling, I found these guides ( http://h30434.www3.hp.com/t5/Operating-systems-and-software/General-XP-Downgrade-Guide-for-HP-Laptops/td-p/83267, http://maxeasyguide.blogspot.com/2008/04/preparations-for-winxp-installation-cd.html). I tried both solutions to no avail; I would still get a blue screen after during the initial install. Then I realized I have the AMD chipset, and thanks to this thread (http://www.techsupportforum.com/hardware-support/driver-support/422183-xp-drivers-presario-cq-61-310en.html) was able to find the Raid drivers, slipstream them with Nlite and begin. The SATA hard drive was readable, and the installation commenced.

Here, though, is the rub. I am able to get through the basic install screen (F8 I agree, partitions, etc) and through the first "GUI" install screen (Agree to EULA, "Your Screen May Flicker for a few Seconds" etc). However, after that install and when the computer restarts and goes to load XP, I get the XP splashscreen for maybe 1-2 seconds, then the system reboots. I have no idea why. I know the install I am using is solid (it is running tried and true on another machine), and I have tried making a second boot disk, but every time I encounter the same problem: splash screen for a second, then restart.... Read more

A:Downgrade from Windows 7 to XP Pro on a Presario CQ61 - Splash Screen Stall

i hope u have gone to the compaq website and checked to see if your model of computer even has xp drivers available.if there isnt u might be out of luck or at the very least have a very hard time tracking down the correct drivers which is usually the chipset, audio, video, and internet. to go from windows 7 to xp u have to change the bios to be SATA ATA IDE or compatible to run xp properly. u go to the bios by tapping F2 right after the splash screen.hope this helps u.
 

1 more replies
Answer Match 70.56%

Hi guys,

I've isntalled Windows XP Professional (32) bit on a HP Compaq CQ61-231TU Machine with the help of nLite.

I had been using Windows XP on same machine. But this time, I'm not able to find its VGA / Graphics Drivers for XP.

Could someone please help me on this ????

Regards,
Farhan
 

A:HP Compaq CQ61 VGA Drivers Not Found

Here is the support and software site for the Compaq Presario CQ61-231TU laptop.
You should add and save this site in your browser favorites/bookmarks list so you can readily refer to it when needed.

The drivers and downloads section has drivers for Windows Vista and Windows 7, but not for Windows XP.
Did you downgrade that laptop to Windows XP?

That laptop appears to have either an Intel or a NVIDIA graphics device, so we need to confirm which one it has.
Go into the Device Manager and then advise the names of the entries that have a yellow ? next to them.

------------------------------------------------------------
 

2 more replies
Answer Match 70.56%

Ok guys, this one has me hung up and I would appreciate some help. A user brought me their Compaq CQ61-420US laptop that they purchased from a pawn shop. At first the PC wouldn't even turn on. I ended up having to replace the power cord and a new battery and also had to replace the motherboard fan because it was not spinning and causing the PC to overheat. After I got the hardware part fixed I found that the PC had a lot of malware. I ran a scan and cleaned the PC up completely.

Now when I try to start the PC sometimes the PC will boot just fine and other times The PC just starts up but there is a black screen and the CAPS LOCK AND SCROLL LOCK lights flash. After I completely drain the battery and recharge it then it will fire back up normally. I've also tried different RAM but the issue still persists. I'm thinking this may be a motherboard issue but wanted to post on here and get some of your opinions.

Thanks for any input!
 

A:Issue with Compaq CQ61-420US

The Compaq Presario CQ61-420US (WA976UA#ABA) laptop originally came with Windows 7 Home Premium 64-bit.

Because that laptop was purchased at a pawn shop and contained the programs and debris and issues from its previous owner, it needs to be wiped out and given a fresh start.

The factory restore recovery disc kit for it can be purchased here.

------------------------------------------------------------
 

3 more replies
Answer Match 70.56%

Hi Can someone advise me if this notebook is suitable for the Windows 10 upgrade. I've been told that it doesn't have the correct drivers. I thought that new drivers would be installed with the upgrade? Thank you Jack

A:Compaq CQ61- 401SA ( Windows 10 )

Here's the specs: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01967531 You have the Intel 4500M GMA graphics and it is a T4400 Pentium dual processor.  Windows 10 does not have a built-in driver for your video chip. However, the internet and youtube are full of workarounds. I have installed Windows 10 on several laptops with that hardware and it will work but in most cases I have eventually gone back to Windows 7 which works better on that era of hardware.  If this is "the Answer" please click "Accept as Solution" to help others find it. 

1 more replies
Answer Match 70.56%

Working one day ... may have overheated (sons laptop) and next day - no power

AC charging light is solid white but battery doesnt seem to hold a charge after trying it in another computer.

Power button does nothing, no light reaction, no sounds, no fans, nothing.

Ive tried a hard reset ... no results

Cmos battery?
 

A:Solved: Compaq CQ61 - no power

13 more replies
Answer Match 70.56%

I have been experiencing this since returning to a regular non-usb headset, I cannot set independent headphones as default device, I have found a workaround by disabling Speakers and Headphones. I may just have to buy a new USB headset because this is driving me nuts. If Speakers and Headphones are enabled and sound is coming through my headset, minute i key my mic on Ventrilo it goes to speakers on my laptop.

A:Compaq CQ61 IDT HD Audio and Headphones

think i fixed it, disabling independent headphones worked, headphones play right without jumping ship to speakers

1 more replies
Answer Match 68.46%

Hello-have prev worked with Compaq tech support 3 sessions but still have same problem with video. Until recently, I could watch MSNBC video OK. Have never been able to watch CNN video. No new software has been added to computer recently. Now, when I click to see video on MSNBC, it acts like it's going to open, then get x in corner and says done in taskbar. Then screen comes up telling me to install free software and a link to windows media player 10. I do this, it loads as it should, and I try to install as normal. At end of installation, it gives me error message from Windows Media Technologies. It says"this version of WMT is incompatible with this version of windows. For more info view the info at the Microsoft website". Have tried this several times. Have gone thru several scenarios with compaq and tried many different remedies. Have tried to uninstall all WMP entirely and reinstall. Many restarts. Disc popup blocker, antivirus, firwall, defrag, run programs that compaq had me try. Same prob now. Have the 8 system recovery disc's from compaq if all else fails but don't want to do that if it can be corrected any other way.
 

More replies
Answer Match 67.62%

I bumped my laptop this morning on the mouse pad (the thing you run your finger on to move the mouse curser) pretty hard and my laptop shutdown, as I went to power it back on it wouldn't turn on. I can click the power button all I like nothing will start up. I took off the caseing above the RAM and hard-drive and made sure they didn't shimmy loose, after I made sure neither was loose I put the covers back on and I'm still having the same problem.
I have been having hard-drive problems latley and have to replace the hard-drive but thats beside the point.(Laptop only works in safe mode with networking). I have someone who wants to buy it with the current hard-drive problem due to the great price I offered. But I am ensured that theire not going to buy it if the damn thing wont power on.
The power cord and battery work just fine. (Was working good last night) Could somthing be loose? I have read tons of articles on this matter and nothing I saw applies to me. Would this have somthing to do with the CPU and Motherboard parts getting loose enough so it cannot recive power? Or is this one of them problems when I have to either take the whole damn thing apart and sauder stuff or what? Any imput will be greatly apreciated.
 

A:HP Compaq Presario F700 problem

You need to disassemble the case to get to the MousePad unit... remove, adjust, and replace it, then remove or disable the current touchpad drivers, and reinstall them from a Presariou download...
It there is any permanent damage, you will see it, but usually it is an adjustment of components.
 

4 more replies
Answer Match 67.62%

I have a Compaq Presario SR1650NX that is probably about 3 years old. It locks up during start up on the Windows Microsoft XP screen. I don't even know where to start to fix it or figure out what's wrong. Any suggestions?

A:xp compaq presario start up problem

Can you start the machine in Safe Mode?

This is accessed by tapping the F8 key during startup (you'll probably need to do this about once every two-to-three seconds from the time you turn the machine on - shouldn't take more than 20-30 seconds to reach the menu), and selecting Safe Mode from the menu that appears.

4 more replies
Answer Match 67.62%

Hello all...
I recently wanted to install a program which told me i halfway through the installer that i had to have SP3 to run it.
So i googled sp3, went to the microsoft website and downloaded it.
My pc started to do the loop reboot thing thats assicoiated with amd processors..of course i didnt read up on this before i installed it.
So i researched how to fix this problem and came up with alot of different solutions.
I went to go get the xp disk. Inserted it in the drive and pressed F10 upon startup which launched the system recovery thing for compaq. I clicked recover or whatever and it started to do its thing, next thing i know its reinstalled xp...
So im thinking its wiped everything and installed a fresh version of XP which is not the case.
It still shows the programs in the program list but i cant use them and when i look at the C: drive capacity, there is still the same amount taken up and a little bit more, as i had previously before the crash.
Ive kinda worked out that its installed itself over the top of my older xp? but i dont know how to get this back
Please help!
 

A:Windows XP Compaq Presario Problem.

7 more replies
Answer Match 67.62%

Hello,

I have Compaq Presario C784TU laptop with windows 7 updated on it.

Recently while watchng a movie,the audio suddenly started giving problems.
i updated my audio driver in the device manager and it installed Conexant High Definition Audio Driver 221. After installing that,my audio completely stopped working.

Also,that my headphones are working but only the speakers have stopped working.
I have checked all the settings and also i dont think there is any problem with the hardware.

Could any one please help me with this.

Thanks.

A:Compaq Presario audio problem

Hi,

I would suggest you to run Windows Audio Playback Diagnose and Repair from the below MS FIX-IT: http://support.microsoft.com/mats/AudioPlayback/

If the issue still persists, then go to control panel/sound/speakers/properties/advanced/restore defaults.

If nothing works, I suggest that you uninstall and reinstall the drivers for your Audio device. This will reset all Audio Components.

Kindly revert and let us know if that fixes your issue.

1 more replies
Answer Match 67.62%

I just got a used Compaq Presario V2000 laptop. It was working fine but it was running slow and there were some other problems so I formatted the drive and installed windows xp. Now, all of the hardware is unrecognized. The speakers arent found, the video card isnt found, the monitor, wifi internet, etc. Everything either isnt found or its generic so under monitor it just says "Video Monitor". Can anyone help me with this? I got it used so I dont have a recovery disk or anything. Here are the specs:

1.7 or so Ghz Amd Sempron 3100+
around 896mb of ram
128mb ATI RADEON video card (forget which one)
Altec Lansing speakers

Thats all I know from the top of my head. It would be greatly appreciated if someone could help me.
 

A:Compaq Presario V2000 Problem

6 more replies
Answer Match 67.62%

When starting this pc it will load the BIOS but is then unable to load the Win XP software. It gives a message stating that it is unable to find the system software telling me to initiate the repair process.

By pressing the 'r' key a restart of the pc is initiated causing the pc to reboot. Sometimes the boot process will find the systems software and other time I will need to press either the F1 key to go into the BIOS setup and the exit or press the F8 key to go into safe mode startup to cause the pc to find the system software and thus start up.

This pc has all of the latest updates from Microsoft loaded onto it. The XP version is 2002 and with service pack 2 installed.

I have run the PC-Doctor software installed on the pc which tells me that there are no problems with the hard disk. That being case, is the problem with the operating system? If so how might I obtain the repair disk the BIOS is asking for?

Any help would be appreciated!

A:Compaq Presario startup problem

Your pc should have came with a XP Installation Disk. All you do is insert the CD in the CD Tray and reboot. When it ask to press any button to boot from CD, press any button and the CD will start to load files. Once that is complete (usually 2-5 minutes) press ENTER the press R to repair Operating System

1 more replies
Answer Match 67.62%

hi folks, need help fast,

hi hope you can help i have a presario compaq which when i brought i went into some set up and where as when it loads it asks for a password before it loads.. i now want this off as its just annoying!!! i have the password luckily but whenever i go into it before it loads by pressing esc and try and disable it, and save config its still asks for it when i reboot any help or advice im really willing to pay i even have tried to defualt it and save but still asks any help would be amazing
 

More replies
Answer Match 67.62%

Hi:

Here's the problem:

Someone asked me to see if I could upgrade an early (old) Compaq Presario 5WV254 computer. The first thing I did was max out the RAM (768MB) using Crucial's 'certified' Compaq modules.

This dinosaur has a 40GB hard drive and an nVidia 8MB graphics card. I placed Windows XP Pro into the drive and proceeded to format the drive with NTFS. Everything went smoothly, and the machine rebooted after installing the drivers, etc.

Unfortunately, instead of continuing to proceed with the usual installation process, it starts the initial setup process over and over (I let this happen about 7 times) and will not complete the installation.

I've performed upgrades on lots of these older Compaq Presarios, but have never encountered this before.

Does anyone have any ideas as to how this issue can resolved?

Thanks in advance.

Griff
 

More replies
Answer Match 67.62%

i used to have win vista , move to win 7 ultimate , no audio anymore , can you help me?
thanks
[ Sonido DirectX ]----------------------------------------------------------------------------------------------

[ Controlador primario de sonido ]

Propiedades del dispositivo DirectSound:
Descripci?n del dispositivo Controlador primario de sonido
M?dulo del controlador
Buffers principales 0
Tama?o de muestra min/m?x de los buffers secundarios0 / 0 Hz
Formatos de sonido de los buffers principales Ninguno
Fomatos de sonido de los buffers secundarios Ninguno
Buffers de sonido (total/libres) 0 / 0
Buffers de sonido est?ticos (total/libres) 0 / 0
Buffers de sonido fluidos (total/libres) 0 / 0
Buffers de sonido 3D (total/libres) 0 / 0
Bufers de sonido 3D est?ticos (total/libres) 0 / 0
Buffers de sonido 3D fluidos (total/libres) 0 / 0

Funciones del dispositivo DirectSound:
Controlador certificado No
Dispositivo emulado No
Tama?o de muestra preciso No soportado
DirectSound3D No soportado
Creative EAX 1.0 No soportado
Creative EAX 2.0 ... Read more

A:problem w mi lap v3417la compaq presario

Have you update the drivers from the HP/Compaq website?

7 more replies
Answer Match 67.62%

My Compaq Presario X1000 has a problem that i find impossible to fix. What happens is that when I turn on the pc, it doesnt respond and just stays blank even though all the lights are on. When i learnt about the pressing the top of the f6 button while turning it on, it works. But during using the pc, it would somehow flicker and turn black again. Is there any way to permanently solve this problem?
 

A:Compaq Presario X1000 problem.

It sounds like you have a hardware problem. Maybe a power short. Maybe a bad power cable or connector. Maybe a bad motherboard. The possiblities are nearly endless.

If you feel that you are not skilled enough with notebook hardware, consider taking it to professional. Often they will diagnose for free or little money.
 

1 more replies
Answer Match 67.62%

hi, i have problem with my compaq presario m2000. i cannot it turn on.
it only displays the compaq logo. Pliss help me.Sory for my english.thank for you help.
 

A:compaq presario m2000 problem

13 more replies
Answer Match 67.62%

My desktop goes straight to this screen. And nothing else happens.

A:Compaq presario booting problem! Help!

Some more info would really help. Make and model, what is the screen it goes to?

Can you get to the safe boot menu (F8 on startup)?

19 more replies
Answer Match 67.62%

Hi All

I own a Compaq Presario F551AU laptop. It has been playing up so I used the HP system restore feature to restore it to factory settings. This meant that all data would be destroyed as the disk would be formatted as part of the process. Part of the process was to back up all other data which I did to a USB disk and it worked perfectly. The computer was then formatted and restored to factory and all works fine.

Now comes the problem.

When I use this to restore the back from the HP resotre utility is does not find the disk drive with the back up on it. Yet I can access the drive and find the back up files manually. Part of the back up file is an application which also sets the process as well. This also does not find the necessary files.HP say sorry no idea and of course windows back up does not recognise it.

Lots of important data on this. If anyone can help I would appreciate it very much.

Thanks

TonyinOz
 

A:compaq presario restore problem

Try this.
 

1 more replies
Answer Match 67.62%

Hi there!,

I have a Compaq Presario 1400 notebook model 14XL355 (celeron 667). It came with 64 MB of RAM (integrated). I have just bought an additional 128 MB of RAM (branch infineon, model hys64v16220gdl-7.5-c2), but when I connected it, my laptop did recognize only 64MB. That is, now my laptop says I have 128 MB when I am supposed to have 192MB.

Any idea about what's happening?

Thanks!
 

A:compaq presario RAM addition problem

6 more replies
Answer Match 67.62%

Hi,
My Compaq Presario 2100 boot up to this:
PreBoot Execution Evnironment
PXE_E61 Media Test Failure. Check cable.
Then tries to reboot again.

Then I use the QuickRecover CDs that comes with my laptop. I get this:
Exception 0E ErrorCode=0004
CauseWay Error 09 Unrecoverable exception.
The CD eject.

Then I try to boot from the MS OS CD.
I managed to get into the recover mode and get a c:\
I tried chkdsk, fdsk, but got invalid drive.

Looks like my harddrive is gone.
Questions:
I want to get a bigger drive 40GB from the same manufacturer(Toshiba), will it be compatible with the BIOS, etc?
I tried to manually pull out the harddrive from under the front of the keyboard. But I don;t want to break anything in so doing. Any ideas?

Any suggestions is much appreciated.
 

A:Compaq Presario Boot problem

As I ahve been working with computers my whole life you must be one person that might not know a lot. I am not calling you a liar or anything but I do not believe that your hard drive is under the keyboard as HP owns compaq and I ahve not seen an HP note book that has a Hard Drive under the Key Board. I believe your hard drive is under tha lab top or at the front. Mind it being you will have to take some screws out and go hunting.

On anoter note if your Hard Drive was fried yur lap top would not even reconize it. There for Ibeleieve it is a windows installaion problem I think yiou said you are using Win XP. If you are do a full format of your Note Book and try to reload the boot disks. If the boot disks dont work the just load windws as your boot disks might have a problem or are corrupted with scratches mis use etc.

Need any more help IM me.
 

2 more replies
Answer Match 66.78%

Hi,

Recently my Presario 2100 keyboard gives me a problem: the G key won't work anymore, but pressing H or ' or the up arrow will also trigger the G key, it can only be stopped by pressing another key:

hgggggggggggggggggggggggggggggggggggggw
'ggggggggggggggggggggggggggggggggggf

I did take out the keyboard and spray it with compressed air (in a bike workshop), and it is still the same.

It there any way to solve this problem, without having to pay for a new one?

Thanks for any advice.
 

More replies
Answer Match 66.78%

Hi guys my laptop is giving me startup problems when i press the power button the processor light flicks and the fan runs but only for a few seconds, shuts down and starts again on its on. It does that several times before it finally loads win XP.What could be wrong and what can i do?And it sometimes shows blue screen when im working and reboots.
 

A:Compaq Presario 2100 startup problem.HELP

6 more replies
Answer Match 66.78%

I have a Compaq Presario V5000 that won't power up. The fan powers up for just a half second and then shuts down again, but the power light stays on. There is NO post or boot. No screen. It did this intermittently at first but is now permanent. I've done all the power options - no battery, etc. This seems to be a common problem with HP/Compaq laptops. Is it worth replacing the motherboard or should I just scrap it?
 

More replies
Answer Match 66.78%

I have winME installed on Compaq Presario 5000 with 700mhz celeron 64mb ram 15 gig drive with a DVD and CDRW.

The computer recognizes the DVD which works great but the CDRW is not recognized at all in control panel. The light on the CDRW blinks once on boot up. I took cover off and reseated all connections which are tight.

If I run compaq diagnostics, the computer locks up. If I add new hardware it never finds the CDRW drive.

I went to compaq help site online and ran a diagnostic there which worked without locking up. However the CDRW is not found on list of hardware.

I cannot figure out how to check bios to see if it is configured wrong.. BTW, I have an extra Creative Blaster CDRW(new) that could be installed, but since this compaq is new I hate to replace something in it without making sure it is broken. Also, I dont want to send my new computer off to a service center if I can fix it.

Any ideas on what I can do?
 

A:Compaq Presario 5000 having CDRW problem

8 more replies
Answer Match 66.78%

I've just bought a Compaq Presario v6000 with vista - the Wifi connection to my DLINK router if giving me intermittent problems.

The link to the router seems to remain up but i lose my connectivity to the internet. This can happen if I leave the unit idle for a few mins or I hibernate/sleep the unit. The only way I'm able to the re-connect is to shut down and restart the Laptop.

Has anyone seen this before?

A:Compaq Presario v6000 Wifi problem

See other posts in this forum - seems there is a known hardware problem with the laptops and wireless networks. I am having the same issues with mine. Only mine is out of warranty and dont really want to send it away for repairs.

2 more replies
Answer Match 66.78%

My compaq laptop screen is not working properly. The problem is that i can not see full screen of my laptop. it appear two side one is fully black and another side window appear but in two horizontal part. What is wrong? And how do I fix it? Please help.
something like that

More replies
Answer Match 66.78%

Hi i have a compaq presario r4000 had it about a year now and every time i turn him on the dvd rom drive makes a cracking sound and does not play anymore dvds or cds
it is a hp GCC-4244N

Any body got anyideas on how to fix it

Greets

 

A:compaq presario r4000 dvdr om problem

THe noise it makes is the same as an old fashioned harddrive
and if i put a cd or dvd in it does not regonise it
ideas anybody?
 

1 more replies
Answer Match 66.78%

Hopefully I posted in the right section. But anyways I will be as detailed as possible. Currently I have a Compaq Presario CQ56 115dx running Wins7 out of factory. One day I was using my computer perfectly fine, everything normal and running great. I decide to close the lid to put it to sleep.

I come back later to find that it didn't actually sleep and was just stuck there. This has happened before and I would just turn off the computer and it would be fine. But recently I did and it is now stuck at bootup. The caps locks blinks 1 time, which corresponds to CPU not functioning I believe. I reseated harddrive and ram, didn't do much.

Then randomly as I am trying to get it to boot by turning it on and off, waited a few and it booted up normally. Perfect. Then I decided to shut it down instead of putting it to sleep just to find later when trying to get on, its back to the problem.

Any help would be appreciated on how to prevent this without any major repair work.
 

A:Solved: Compaq Presario CQ56 problem

7 more replies
Answer Match 66.78%

Hey Guys, Problem number 50000 has occured lol

Trying to boot up my Compaq Presario V6000 after not using it for a while
It'll start up for a while then just cut off...
Next time it comes up blue screen with this on it

***STOP: 0x00000005c (0x0000010B,0x00000003,0x00000000,0x0000000)

What on earth does this mean?
How can i fix this?
I've tried rebooting to factory still problems occuring?

Any ideas guys?

Cheers
Paul
 

A:Compaq Presario v6000 major problem

1st thing I would try is to re-seat the RAM, pull it out blow it off and put it back in...(make sure there all the way in)
if you get in windows, go to C:/windows/minidumps, copy them here, maybe someone with more experience can look at them for you...

good luck!
 

1 more replies
Answer Match 66.78%

Hiya

The screen on my Compaq Presario C700 has gone green and fractally.It looks a bit like its eaten someones' acid. Not ideal, and is a bit migraine inducing...

It comes back to life if I tilt the screen right back, which says to me its a loose connection somewhere. Its not the motherboard, as I have checked it on an external monitor and is fine...

BUT

I have disassembled and re-assembled and its still the same, and now have a query...

Behind the screen, along with the ZIF connector that connects at the top , there is a tiny white plug on a silver cable that isnt connected to anything, and I cannot see anywhere it should live. Is this for a camera maybe, or is this maybe my problem?

Please, any advise would be massively appreciated. The disassembly manual on HPs website was completely useless, it appears to be for a different model than the one I asked for...

I look forward to your reply

Andy
 

More replies
Answer Match 66.78%

After purchasing (1) 128 MB SDRAM, PC133 RAM stick for my old Compaq Presario, Model 5822, with a Pentium II processor, 550 MHZ, I realized that the "Computer Wiz" sales kid at the Best Buy didn't know what the heck he was talking about.

After a search here, (what I should have done before buying) I checked the following sites that were recomended by the TG members:

http://www.4allmemory.com/index.cfm?fuseaction=search.memorySearch&manufacturer_id=25&model_id=12636

http://www.crucial.com./store/listp...Compaq&cat=RAM&model=Presario+5822.&submit=Go

http://www.ec.kingston.com/ecom/con...asp?SysID=+8681+&distributor=0&submit1=Search

Apparently, I should have bought 1(or 2) PC100, SDRAM RAM stick(s). However, I still have a few questions that I hope someone will answer:

1) Memory.com & Crucial.com say that the maximum memory for this computer is 256 MB, while Kingston.com says that the maximum possible is 512 MB. The computer has two RAM Slots (64 MB & a 32 MB). Who is right?

2) On the package of the new, ill purchased, 128 MB PC 133, it shows also 16x64. What does this mean? Should I watch out for these numbers during my next trip to BEST BUY?

3) Whats the deal with DDRAM, SDRAM, RAM, .....Which one is right for my computer?

Thanks....

PS. In case anybody is wondering, I put in the 128 MB RAM along with the existing 64 MB RAM. The Computer displayed (counted) the RAM up in the top corner (white characters on a black sc... Read more

A:Another RAM Upgrade Problem~Compaq Presario 5822

11 more replies
Answer Match 66.78%

first please take a look at this video on the youtube which i took to show the problem

http://www.youtube.com/watch?v=AaXr3y5c9? if u cant the access youtube then there is a picture of the laptop http://i54.tinypic.com/o5s082.jpg
anyone know how to fix it??? it was working untill i restarted the system and i have tried reinstalling the copy of windows 7 and bt no luck stilll bt it works fyn on the external screen if i connect it through the VGA port.... Bt the screen resolution stays 1024 x 768 cant change it to higher version at all..... Please some1 help me................... Laptop is Compaq Presario v3239tu model........
cant see the bios screen at all to get into that

i reinstalled the copy of windows 7 through the external screeen
 

A:Display problem with Compaq Presario v3239tu

The YouTube video is corrupt... It doesn't look like the HP support has a Windows 7 video driver for your model laptop. Did the laptop originally come with Vista installed or XP? If you have a Nvidia video chip, you might find a better driver there at the Nvidia support website
 

24 more replies
Answer Match 66.78%

Hello,

The sound on my 3-month old Compaq Presario SR5510F is not functioning at all. I cannot hear the sound on webcasts. There is no sound on clips on the internet, including videos. I cannot hear any music playback ;and now, I cannot hear persons that I chat with on the Skype, though they hear me when I speak.

I took the computer to the Geek Squad today at BEST BUY. They tested it with their accessories and told me all was fine. I bought a new headset and external speakers. When I returned home and connected these, together with my DELL monitor, to the computer, there again was no sound.

It is very frustrating not having the sound as I do conferencing on Skype and Go To Meeting quite frequently. I have one on Monday morning. I need and will appreciate your help for solution.

Thanks.
 

A:Sound problem with Compaq Presario SR5510F

Hi there

Have you tried reinstalling the drivers for your soundcard?

To do so you must first uninstall the current drivers by starting a run dialog (Either Start > Run or by holding down the windows key and pressing "R") and typing in:

devmgmt.msc

You find your sound card/audio device, right click, go to properties, and under the driver tab select "uninstall."

Then download and install the correct driver:

http://h10025.www1.hp.com/ewfrf/wc/...&dlc=en&cc=us&lang=en&os=2093&product=3740354

if that doesn't work, try this one:

ftp://152.104.238.19/pc/audio/WDM_R198.exe
To find other drivers for your system and more support go to:

http://h10025.www1.hp.com/ewfrf/wc/product?product=3740354&lc=en&cc=us&dlc=en&lang=en&cc=us
 

1 more replies
Answer Match 66.78%

The symptoms of this problem are so specific. I hope someone recognizes them.

My computer will not finish booting normally. The screen will either remain totally blank or else it will begin booting only to go blank or sometimes some small section of the screen will be repeated all over it. The boot up process always fails in one of four places:
1) The screen will remain totally blank on power up.
2) The COMPAQ logo will appear for 2 or so seconds then it will fail.
3) The COMPAQ logo will come and go, then the cursor blinks in the upper-left corner for a few seconds, and then it will fail.
4) Windows will start loading and "Microsoft Corporation" will appear on the screen for about 1/2 seconds, then it fails.

On all occasions, the fans and LEDs will turn on, and the HD and DVD make noises.

This is the part I hope will be a huge clue to some of you out there. If anything appears on the screen during two consecutive attempts to turn the computer on, then it will always successfully finish booting on the latter attempt. It will never finish booting unless this happens.

What is strange is that it seems to know whether something appeared on the screen during the previous attempt, because during the one immediately after that, the screen almost always remains totally blank. So at most something will show on the screen only every other time I turn the computer on.

It usually takes a large number of tries before something will appear on the screen during two consecutiv... Read more

A:Strange Boot-Up Problem Compaq Presario

13 more replies
Answer Match 66.78%

When I insert an SD card into the reader, the computer will recognize it but I can not open it or move things onto it. If I go into My Computer it shows the card as being there, but when I double click on it nothing happens. Any advice?
 

A:Compaq Presario R3000 SDcard problem

Try it in another device to see if it can read or store there... Flash memory cards have a very bad failure rate.
You might also try reformatting the card.
 

1 more replies
Answer Match 66.78%

Greetings

I have a Compaq Presario 1685 notebook, and its TFT display has clouded up on me till its all white and nothing is visible on the desktop.

An external monitor works fine on the system (which kinda eliminates the video card) but I beleive something might be up with the screen itself.

The problem occurred previously, and I solved it when I noticed that applying delicate pressur to certain spots behind the screen, cause the display to return as normal..

This doesn't work anymore though.

Another thing is.. when the computer is off for a long time (about a day) it takes longer for the screen to get cloudy white. For example.. the system would boot normally, the red COMPAQ logo would appear, followed by the initialization screens, and the Windows 98 startup screen.. then the desktop would appear.. and a couple minutes after, it would turn white.. boom..

If anyone has any ideas on this.. I"d love to hear 'em... THANX!
 

A:Compaq Presario 1685 Display Problem

It sounds like the laptop display is shot. Contact Compaq to see how much it will cost to replace it.
 

2 more replies
Answer Match 66.78%

Hello,
I purchased a Compaq presario V3617LA laptop a couple of months ago which is running Windows Vista. Here is the problem I have been having:

It frequently freezes for several seconds and then shuts off. This seems to happen when it is attempting to load a web site with many images, though it often happens when only one or two applications are open as well. It is as if only a few MB of the 1024 MB are functioning.

I have run the hard drive diagnostic test, memory test, and did a system reinstallation as well with no success.

That is my main problem. Another minor question... how does one disable the function where touching the touch pad is equivalent to a left mouse click?

Thanks so much for any assistance.
 

More replies
Answer Match 66.78%

I have a Compaq Presario V2000 laptop, about 4 years old, and it fails to start up 100% of the time. Successful start ups happen now around 40% of the time. Typically it starts up with the Compaq logo at the beginning and either stops there or goes blank to the cursor at the top left corner. I've tried to open it on safe mode when it doesn't start up properly, but to no avail or I forcefully shut down the computer until it starts up. Is there a way to ensure that it does start up, because I have gone through dry spells for weeks before I have a successful start up?

Any help would be greatly appreciated! I'm not so savvy on the computer lingo so relatively simple explanations are greatly appreciated as well!
 

More replies
Answer Match 66.78%

I have a presario 700 it shuts down after a couple of minutes. I tried just booting to BIOS and same thing happens. It's probably a heat issue but is there anyone with a suggestion to remedy the situation?
 

A:Compaq Presario 700 laptop shut down problem

Fan works but it is mostly on high. The BIOS stinks doesn't have much to choose from and temp is not an option. I am going to try the dusting hopefully that will be a quick fix. thanks for the response.
 

3 more replies
Answer Match 66.78%

I have a Compaq Presario that lacks a Ethernet cable link. It only has phone line links, but no Ethernet cable link. The network connection I use requires my Adapter to be able to connect with an Ethernet cable, but my desktop for the Presario doesn't have one.

Question: Is there any kind of cable that has the Ethernet on one side, and a Phone Line cable at the other side that I am able to purchase? Or is there any kind of link cable of some sort that could help my ethernet cable connect to this computer that does not have an Ethernet cable link? Thank you if helped.>.<
 

A:Ethernet cable problem with Compaq Presario

If you have a USB port, you can buy a USB to ethernet adapter for about 10 dollars.
 

2 more replies
Answer Match 66.78%

I have a Compaq Presario V5000 that won't power up. The fan powers up for just a half second and then shuts down again, but the power light stays on. There is NO post or boot. No screen. It did this intermittently at first but is now permanent. I've done all the power options - no battery, etc. This seems to be a common problem with HP/Compaq laptops. I replaced the CPU to no effect. Is it worth replacing the motherboard or should I just scrap it?
 

More replies
Answer Match 66.78%

My compaq laptop screen is not working properly. The problem is that i can not see full screen of my laptop. it appear two side one is fully black and another side window appear but in two horizontal part. What is wrong? And how do I fix it? Please help.
something like that

A:compaq presario c700 screen problem

hi hook it up to an external monitor does it show correctly on the external monitor?

1 more replies
Answer Match 66.78%

I got a Compaq Presario 1800 as a hand-me-down from my friend. It has a sound problem: no sound from the laptop speakers can be heard. The headphone jack is messed up, and the O shaped plate that goes on the plug is missing. But, if I plug in headphones and point the headphone plug up, sound can be heard from the headphones. Is there any way to fix the laptop speakers?

Thanks!
 

More replies
Answer Match 66.78%

Customer's Presario was attempting to load into XP home and stopped at screen with mouse pointer that didn't move when mouse was moved. Booted into safe mode. Same thing. Booted to recovery partition. More or less same thing. Finally convinced Compaq tech support to send the recovery cds. It recreated the restore partition and then, IIRC, stalled at the same place when it tried to restore the Windows partition. Finally, I tried to install windows 98, and it stalled out during registry creation.

Somewhere along the line, I started to suspect a hardware issue. :-/

I've checked both the RAM and hard drive and they're clean. A friend has suggested that it might be the mouse's PS2 port and to try turning it off in BIOS and use an USB mouse. I haven't tried that yet - I'm working on another computer.

Does anybody have any other suggestions, or should I start shopping around for a new mobo if that doesn't work?
 

A:Compaq Presario unknown hardware problem

7 more replies
Answer Match 66.78%

We bought two Compaq lap tops for our kids at the same time. One has never really held a charge very long on the battery. Battery went completly dead, will not even start with the power cord that still works. Is there an intrenal battery that needs changed?

THANKS
 

A:Power Problem with Compaq Presario 2200

Did you try removing the battery, yet keeping the adapter plugged in and booting? There is no internal battery - but if the laptop won't start with just the cord, then typically it's a larger hardware issue (motherboard, bad component, etc.)
 

3 more replies
Answer Match 66.78%

Hello all,
I have a machine here that was working fine up till 2 days ago. And now it won't boot up. There is no POST, the monitors LED cycyles (indicating it is connected to the tower and in power save mode), and no beep codes. The LED's on the front of the tower are lit (both power and HD) and the power supply fan runs but that is it. The HD does not spin nor does the CD drives eject buttion fuction (indicating no power). The whole unit acts as though it is in sleep mode.

I am gussing the power supply failed, anyone else have any experence to the contrary or have other ideas?

Oh I also tried wiping the CMOS but to no avail. Any help with this is appreaced.

-Gameman
 

A:compaq presario 6000 boot problem

12 more replies
Answer Match 66.78%

Good evening,

I have a Presario 1500 notebook for more than ten years now but after my last format it is impossible to watch smooth streaming video (YouTube for example).

I did what I do every time, I used the original system recovery cd's, the original Windows XP OS cd and of course I downloaded the usual drivers (chipset, sound, video-graphics) but the problem persists. Furthermore, after a while the computer crashes in an ATIfailure kind of type.

I tried various sites with drivers but nothings seems to work.

PLEASE HELP!
 

A:Compaq Presario 1500US video problem

The exact error would be helpful. However, if your description is semi accurate, it sounds like the laptop has an ATI video chipset and the error would indicate an ATI video driver crash.

It's generally recommended to only use the drivers supplied by the laptop manufacturer. So try updating/reinstalling the video drivers and use the drivers from Compaq (even though they are likely old).

Having said that, you can try getting drivers directly from the video chipset manufacturer. But drivers directly from the chipset manufacturer don't always work.
 

2 more replies
Answer Match 66.78%

I have a Compaq Presario SR1879UK and when I pressed the start button on the tower the PC did not come on but the light surrounding the start button flashed continuously. I tried to press the button in to turn it off but nothing happened and the light kept flashing. Eventually I turned the power off at the wall. When I turned it back on the same thing happened. However, when I tried after about an hour turned off at the wall the PC came on as normal. It has done this several times variously coming on and not. Now it will not come on at all and the start button light keeps flashing.

Would be grateful for some help.

Thanks
mygoose
 

A:Compaq Presario Start Button problem

16 more replies
Answer Match 66.78%

hi guys i am new to this forum and i am not very familiar with hardware part so i
am having a compaq presario b1011 notebook and the dvd rom drive automatically ejects out of the system whenever i switch on the system and if i close it again it automatically ejects and i have done a firmware upgrade too downloaded from the hp website still the problem remains can u kindly guide me with this problem

thank you
 

A:compaq presario b1011-dvd rom drive problem

Does the drive in fact refuse to stay closed at all when the machine is powered on?
 

5 more replies
Answer Match 66.78%

Hi guys, I have a unique problem. After my laptop HP Compaq CQ50 comes out of hibernation or standby the sound no longer functions properly. I get no sound at all. A quick reboot fixes the problem but it would be nice if I could get it to work after coming out of hibernation. Any suggestions? Thanks.

M51

A:HP Compaq Presario CQ50 sound problem

Hi M51.If you're using Vista it's a known issue and there is an update (937077) that addresses that here.If it doesn't work, or you already have it, or you do not have Vista, let us know.Well actually, let us know anyway.

6 more replies
Answer Match 66.78%

I have the following problem with my XP Home SP2 Compaq F762AU laptop.

Sometimes after shutting down the laptop refuses to turn on when I hit the power key. Dead. It's only when I hit the power key together with the Fn key it would power up. This is a combo I accidentally found while grappling to turn it on yesterday, and it happened again just minutes ago. Sure enough hitting the Fn and power keys together at the same time turns it on. Like I said this doesn't happen all the time when I shut down and turn it back on, only sometimes, but it's bugging me.

I realise it may not be too big an issue but it bothers me nonetheless - who knows it could get worse (say, refusing to turn on at all).

Anybody ever experienced this?

Thanks!
 

A:Compaq Presario F762AU Powering Problem

6 more replies
Answer Match 66.36%

Okay I have a Compaq Notebook 3.25gb running Windows xp home. Okay this is the problem... it wont boot anymore (not a laptop tech). Now I've removed the battery and plugged It into the AC Outlet...still no power.. so I'm thinking okay maybe it's the plug...Not!! I place that same hp adapter to another laptop and it works fine. Can anyone provide some instructions on what steps I should take now. I'm thinking it's the board itself or the pin connector on the laptop... thanks in advance here
 

A:COMPAQ PRESARIO 2200/NOTEBOOK..Power Problem

6 more replies
Answer Match 66.36%

i normally hibernate on my laptop, so that i can resume later. lately, it seems that my operating system
has been corrupted, so that instead of hibernating, it is sleeping or something? powering up does not resume. accidental comboination of fn+f2 apparently resumed it once. now, i can't resume or reboot at all. when i power on, the machine attempts to boot using the dvd drive, then powers off.
any ideas ? thx
 

More replies
Answer Match 66.36%

 Hello, this is my first post at HP and I will try to explain it the best as I know.All started when I installed Windows 10 Enterprise 64Bits at this notebook, Compaq Presario CQ60-120ES.As default the video driver was with alert but it was not problem at all because the screen was working witha basic Window Driver and after try to find online driver to the video device It was installed a very good driver,but,...But, after a few weeks I understood that, when I closed the screen and open it again, after the hibernation orsuspend, the screen was always color black, the computer awake always but the screen was black, then I pressed the power on ten seconds to completely power off the notebook and then I could turn on as always. A good day I decided to fix the issue with closing/open the screen and black screen as result, then I returned to install Windows 7 Ultimate 32 Bits. I was very happy surprised when the Windows 7 installation finishes, becausethe first that I did it was close and open the screen, and now was working very well. I did not know if the main problem was at the video device driver or in some differences between energy administration of Windows 10 and Windows 7. Then I follow the first thread, the video driver. I downloaded three video drivers to FV598EA#ABE to the intel graphics solution, one to Windows Vista 32 bit and two to Windows 7, one for 32 and other for 64 bit. Finally I returned to install Windows 10, the unique driver that I was enable... Read more

More replies
Answer Match 66.36%

Hi,My laptop is showing "Enter Administrator Password or Power On Password"I cant find any password that have worked but after a few tryes is says System Disables, Key: 55053602 .Can somebody help me,Thanks

A:Compaq Presario CQ35 System Disable Problem

@pejal? Enter   40931224 Regards, DP-K

3 more replies
Answer Match 66.36%

I have a 2009 compaq presario. Recently I turned it on and saw nothing but a white screen with some vertical streaks of different colors so I turned it off. A few hours later I turned it on again and saw the standard black and white screen with text saying that the computer was improperly shut down and asked if I wanted to start in safe mode. But my keyboard strokes had no effect, and the highlighted option did not change when I pressed the up and down arrows, nor did the screen change when I pressed enter. But I waited a few minutes and eventually got the login screen for windows vista, showing my icon and the guest icon. Again, nothing on the screen changed when I pressed enter or attempted to move the cursor with the mouse. Then a minute later the screen slowly started to fade to white, with the colored vertical streaks as described earlier. Soon the white and the streaks filled the whole screen. A few minutes later though the login screen suddenly appeared again, but it was still unresponsive and again slowly faded to white.

I believe that the operating system itself is probably in good order, and it is probably responding to all of my keystrokes, but that it's the video signal or the monitor that is failing. I would like to determine which it is. Do I have a faulty monitor, or is the problem with the video card? Or with something else?

Secondly, if it is a simple hardware problem, I have a 2nd laptop of the same model. How difficult would it be to swap out needed ... Read more

A:problem with monitor/video [compaq presario laptop]

If the 2nd laptop is exactly the same model you can put the hard drive from the problem laptop into the other laptop and, if there is no problem with that hard drive, it should boot into Windows.

See how that goes and let us know. What model Compaq laptop are they ?
 

3 more replies
Answer Match 66.36%

Hi All,

Hope you can help me.

I have a Compaq Presario C300 Laptop which i am working on.

The screen is faint so at 1st i thought it would be the backlight or the inverter. I changed the inverter to a new working one and no change was seen. I then changed the screen to a working one and that still didn't fix the problem.

I have hooked up the computer to an external monitor and it works fine.

I now am unsure what the problem can be other than the cable.

Can anyone else give me an idea as to what the problem is?

Thank you in advance.
 

More replies
Answer Match 66.36%

Hi, everybody. I have the above laptop and all I get is a black screen. There isn't any faint image on the screen which would tell me the back light is out. I hook up an external monitor and nothing on that one either. Any ideas what can be wrong??? The problem started right after downloading Nortons anti virus and star office. Steve
 

A:Solved: Laptop Problem Compaq Presario x1000

16 more replies
Answer Match 66.36%

Last year, I did a clean install of Windows Vista Basic 32-bit in this computer and then donated it to a neighbor.

Its motherboard has SiS 760 graphics, but the heatsink on the chip was broken off and I was concerned about overheating, so I installed a NVIDIA GeForce 6200 AGP card.

The computer has been working fine since I set it up.

The neighbor contacted me today about the display alternating between normal size and too large, depending on when and how many times the computer is restarted.

I discovered the display adapter in the Device Manager to be on "Standard VGA Adapter" instead of on "NVIDIA GeForce 6200".

Thinking the neighbor had accidentally uninstalled the driver while uninstalling some other programs, I checked the Programs And Features list and saw it still listed there.

I decided to uninstall the driver and then install a more current version.

To my surprise, the current version and a few older versions refused to install because they detected the graphics device as incompatible.

I know the AGP card hasn't died because the monitor is connected to it and displaying.

I'm really stumped at this point, so I'm hoping someone has a solution.

-------------------------------------------------------
 

A:Graphics Problem With Compaq Presario SR1320NX Desktop

11 more replies
Answer Match 66.36%

Hi all,
I have a Compaq Presario 6300us that fails to boot. It goes into the POST and gives me one long beep, then after a few seconds repeats. I have looked around for Compaq POST codes but have not found any for the newer MB's. Anyone know of a site with newer POST codes for Compaq's? I tried the Compaq/HP site but it is only the basic information (installing, drivers etc) and not what I am looking for. Any help is apprecated.

-Gameman
 

More replies
Answer Match 66.36%

Hello everyone!

I have been having this issue recently that I need help with. I am fairly clued up when it comes to computers, but this one has me stumped.

I have a COMPAQ Presario F500AU
1.8GHz AMD Turion x64 X2 Duel Core processor
Nvidia GeForce 6100
Broadcom Wireless
15.4" WXGA Widescreen LCD display
Windows 7 Ultimate beta Ver. 1000 (Windows Vista Home Basic was standard with it)

I recently had to take my DVD drive out and re-insert it due to dusty contacts. I put my laptop back together and inserted the DVD drive back in.

Please note, when I did all this, I was wearing a static strap connected to the computer while working on it on an anti-static mat with the mains and battery disconnected from it.

When I insert my DVD drive into the laptop, my laptop lights up, but I get no video signal. After about 30 seconds my computer turns off and on again. If I take my DVD drive out of my laptop, it boots as per normal.

Has anyone got any ideas as to how I could solve this issue?

Any help would be much appreciated!

Cheers,
David
 

A:Compaq Presario Optical Drive/Boot problem

*bump*

I really need help on this one! I still can't figure it out. Any ideas?
 

2 more replies