Tech Problem Aggregator

No sound when hdmi monitor connected

Q: No sound when hdmi monitor connected

I get no sound when I connect my hdmi monitor my laptop

My monitor has no sound

How do I keep the sound on my laptop?

Thanks
OM

A: No sound when hdmi monitor connected

Try clicking the speaker icon in the lower right corner of your monitor, click playback devices, your monitor should be listed there and you need to set it as default.

3 more replies
Answer Match 88.62%

I have an external monitor with no speakers I use as a dual display along with my laptop monitor. No sound comes out of my laptop speakers nor when I hook up external speakers to it while I have the external monitor hooked up by the HDMI cable. Is there anything I can do to get this to work?
Thanks,
Bill

A:HDMI monitor no speakers-no sound from anywhere when connected?

Right click on the volume control and then Properties,

When you connect the HDMI it becomes the default output device, even though it has no speakers.

You need to change this back to "Speakers" and set as default.

5 more replies
Answer Match 88.62%

I have the same issue in windows 10 home 64 bit-
HDMI monitor no speakers-no sound from anywhere when connected?



When I right click on the volume control, the options it shows are:
open volume control
playback devices
recording devices
sounds
volume control options

It does not give me a properties option.

Then I went to control panel and searched for sound. Then I saw the screen below. There was a Digital Audio as well and I clicked 'Don't use this device(disable)' on it by mistake and clicked OK.



Now, I only have Speakers option. How do I get the Digital Audio option back in here? I think that will solve my original problem.

Thanks

More replies
Answer Match 71.4%

Nothing is showing up on the TV. I selected the Extended screen option & nothing. I looked in Display Settings & no second screen is being detected. Even though on the TV itself. It reads that a HDMI is connected to the specific HDMI port. Windows 10 says my Drivers are all updated & my Displey Driver is AMD Radeon R7 200 Series

A:HDMI connected to Monitor & the other end connted to TV

If the title of your post is accurate.....then that will never work. You have to connect the TV to the PC with an HDMI cable and then do the same thing for the monitor. You need 2 cables. No other way around it.

3 more replies
Answer Match 70.56%

Hello, I am weighing up my options between purchasing an Ideapad 500s or a Thinkpad L460. I do a bit of video editing, and when I'm doing that kind of work I want to hook the laptop up to a 4k screen, (the extra pixels allow a much more efficient workflow). To connect to a 4k monitor at 60Hz I have read that I need a DisplayPort output (which I note that the 500s does not have), or an HDMI 2.0. I suspect that the Ideapad 500s does not have an HDMI 2.0 output, but I would be happy to be contradicted. Could someone please confirm this one way or ther other? Preferably if you could point me to some official documentation about the product which answers the question that would be great! If it does have an HDMI 2.0, I wonder if anyone has any idea how the nVidia chip would handle the 4k screen. I wouldn't be gaming or even doing and 3d modelling or rendering - just some HD video editing - so I expect it would be fine? Many thanks,Tom

More replies
Answer Match 70.56%

Hi! I have this monitor http://www.newegg.com/Product/Product.aspx?Item=N82E16824014146

and this cable

http://www.newegg.com/Product/Product.aspx?Item=N82E16812226013

Connected to a normal TV and HDMI to DVI cable to my lcd monitor at the same time it gave me an option at startup to switch to my HDMI source, but when I did all I saw was black on the LCD screen.

I was able to go into Display settings and switch it to HDMI manually but when it swaps to my lcd monitor its nothing but black again!

Do HDMI to DVI cables work for PS3s? My lcd monitor does not have a HDMI plug in. Only VGA and DVI

I'm hoping theres a trick to get this working or at the very least an adapter that wouldn't degrade the quality as much.
 

A:Playstation 3 and HDMI to DVI Cable connected to LCD Monitor

oh nvm my monitor dosent support high def outputs =\
 

2 more replies
Answer Match 70.56%

Hello, I built my new computer about a week ago and was running it off a single 19" Tevion TV while I waited for the HDMI cables to arrive so I could setup my second monitor.

They arrived yesterday and when I plugged in my 32" JVC LT-32DA30J there was overscanning and the bluriness. I fixed the overscanning in the TV's menu and now the size is correct but even at native resolution, the JVC monitor is still quite blurry and is a strain to look at and concentrate on.

Plugging the HDMI cable into my Tevion monitor made that go blurry as well so it could be the HDMI cable or the motherboard ports (when I first got the PC, the VGA port had the same problem but once updated it looked normal)

Does anyone know of a fix to this ? Or can at least suggest what part is going wrong so I can try and fix it ?

What I have tried:
Changing the resolution - all the different resolutions all show the same blurriness
Changing the refresh rate - problem persists through all refresh rates
Changing monitor settings - As above, changing these settings didn't help with anything

Any help is very appreciated , I've been trying to fix this problem for most of yesterday

A:HDMI connected monitor is blurry and seems out of focus

you dont seem to have changed the 2 most important things!!

1) update the display/gpu drivers.
2) change the hdmi cable.

if neither results in it working then report back!

9 more replies
Answer Match 70.14%

Decided to run this old laptop to my TV so that I could watch shows from online. When I connected using an HDMI cable the sound cuts in and out very bad. Thought the cable might be bad so I switched it out for a new high dollar cable but still has the same problem. Issue occurs both streaming and when testing using system sounds (such as "test" in the sound setup in device manager). Running Windows 10 (64-bit) and have installed all system updates and have tried updating the audio driver but it is saying I have the most up to date driver. Any help would be greatly appreciated.

More replies
Answer Match 70.14%

Hi.  Last week and prior mths HDMI connection worked, TV had sound.  This weekend, 8-20-16, TV sound went away but still had video.  Looked at forums, utube and did the control panel sound device manager.  the Digital Display Audio-AMD High Definition Audio Device; not plugged in is grayed out.  clicked on it to no avail.  the set default is also grayed out so i cant even set a default.  PC speakers do work.  bought a new HDMI cable but no change.  all the drivers are up to date.  not really sure what happened.  worked for months and now no sound.  any idea????

More replies
Answer Match 70.14%

Hi everyone, I just got a new sound bar (Yamaha YAS-105) which only supports Dolby Digital 5.1 (AC3, I think) and I want it to smoothly transcode all of my DTS or newer audio to a multi stream AC3 in both MPC player from the latest K-lite mega pack, VLC and Winamp, or rather, if possible, just in general. If I play something thats DD5.1 in K-Lite's MPC it neatly picks up the audio and displays it as DD on my sound bar, same thing goes for DD5.1 in VLC etc. but as soon as I play something in DTS or higher there is no audio. I've been googling and tweaking the settings already and after messing around a bit it does play sound through MPC but none of my Dolby lights light up on my device and it doesn't sound like 5.1 either, the weird thing is that no lights go on, not even the PCM light just the TV light is connected and it gives a sort of stereo with subwoover sound (so 2.1). If anyone can help me out I'd be very grateful, I know it's possible because it works with media boxes as well, I just can't get it to work on windows... Any extra info, I have an Alienware X51 RC1, Soundbar is a Yamaha YAS-105, like I said it's hooked up via HDMI to my TV and my TV through a Digital optical cable to my soundbar.

More replies
Answer Match 70.14%

Hi, I was wondering if someone can help me. I updated to windows 10 some months ago and realized my beats audio panel was gone. I few day back I re installed the High Definition Audio Device drivers and beats audio seems to came back. I recently bought a denon amplifier and noticed very low sound when I connect the notebook to the amplifier through hdmi.Is the hdmi sending the wrong signal? are there any new drivers for hdmi controllers or realtek sound card? Thanks a lot in advance!!!

More replies
Answer Match 70.14%

Hi folks, so I got a new pc and connected it to my LG 42LV550T using a DVI to HDMI and 3.5mm from line out (and tried headphone socket) to the 3.5mm audio in (RGB/DVI) socket on the TV but I don't get any sound on the TV.
I connected the PC to my stereo using the line out and headphones socket with 3.5mm to stereo/phono plugs and I get sound, but I would like the sound through the TV and then the TV connected to my stereo for better sound all round.

I know DVI doesn't carry sound.

I had a chat on LG support with no help

Any ideas ?

PC specs.
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 8082 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 953516 MB, Free - 897064 MB;
Motherboard: Gigabyte Technology Co., Ltd., H61MA-D3V
Antivirus: Windows Defender, Disabled

Thanks TechnicalH1
 

A:DVI to HDMI and 3.5mm audio connected but no sound

16 more replies
Answer Match 70.14%

Hi, I was wondering if someone can help me.

I updated to windows 10 some months ago and realized my beats audio panel was gone. I few day back I re installed the High Definition Audio Device drivers and beats audio seems to came back.

I recently bought a denon amplifier and noticed very low sound when I connect the notebook to the amplifier through hdmi.
Is the hdmi sending the wrong signal? are there any new drivers for hdmi controllers or realtek sound card?
My laptop is a HP envy 17 j011nr (i think so) core i5 beats audio
Thanks a lot in advance!!!

A:Low sound when connected to amplifier through hdmi

Realtek shouldn't even be involved with the HDMI sound. I suggest to update your laptop's drivers and use "Intel Display Audio" as your HDMI driver. Set the volume to max then you're good to go.

2 more replies
Answer Match 70.14%

Hello, I just bought an HDMI cable to connect from my HP Pavilion x360 onto my TV. Unfortunately, I only get video on my TV but no audio. The audio only comes from my Pavilion x360. I am aware of right clicking the volume icon and clicking on "playback devices" to set defult the HDMI cable or TV. Unfortunaly, this is not visible even after enabling the disconnected and disabled devices. Please, anyone help so I can get the audio on my TV as well? I've let a screenshot. As a reminder, my HDMI is connected on both sides, and I have both disconnected and disabled devices visible. Thank you!

More replies
Answer Match 70.14%

Using ACER K272HUL 31 inch monitor, connected via HDMI to my Y700-15ISK Laptop (ideapad). I am still in warranty according to my support account. (I did however swap out the default hard drive for another one purchased elsewhere) Here's what is happening: certain parts of the monitor with motion will remain colored while static parts will gray out. Here's a reddit thread I submitted to /r/techsupport. In hopes of utilizing two communities. So far, Bad HDMI port seems to be highest contender. I had a Y50-70 before this Y700 whose HDMI port was rather poor in quality; did not seat well, breathing on it wrong disconnected from monitor. It would not surprise me if that is the root problem.

More replies
Answer Match 70.14%

Hey guys.. so I connected my other SA350 monitor from my other broken computer to my main one, and it shows a black screen. They're the same monitors, and the power to both are on. I'm on Extended, the other monitor's input is HDMI and the output port on the computer is DVI (Amazon Basics). Main monitor is VGA to VGA. What should I do? Updated system specs for your convenience.

A:Second monitor connected by HDMI to DVI shows black screen

Solved. Sorry, it seems the monitor is just Pfftt. It's dead, and it's going to the Samsung Service Center ASAP.

1 more replies
Answer Match 70.14%

Hi,

I've recently purchased a Samsung T23A750 monitor and to my disappointment when I try to watch a movie the built in speakers are not functioning. I have a Sony Vaio Z216GX connected via HDMI to the monitor (HDMI-DVI) port. I can definitely see the video, but no audio is playing from the speakers. The built in speakers are not at fault- I did a self-diagnosis of the monitor and the speakers seem to work fine. I also set the monitor as the default for the audio and even when Win 7 says its functioning properly, the speakers still don't work. Conversely, setting the default to my PC speakers work fine. I'm sure its not the HDMI cable- I used the same one to hook my pc to my tv with everything working fine. Any ideas??

A:Monitor Speakers not working when connected via HDMI to laptop

make sure you have the latest drivers for the hdmi can check by going to the windows start bar and right clicking on computer and choosing manage then click device manger and open the tab were it says sound,video and game controllers if you see somthing related to hdmi and has a yellow triangle then right click on it and update software if no yellow triangle is there try it anyways if that doesn't help then post here again, hopefully someone who knows more about hdmi can help also because i never had hdmi but ive had audio problems with my speakers before and this is how ive fixed it before

2 more replies
Answer Match 69.3%

As the title says, I've tried connecting my TV to my computer with an HDMI cable, and the video part works, but no sound plays. When I checked the list of playback devices, the TV appeared (as shown below), but it apparently cannot play sound.

I don't think I know anything beyond what I've posted, but if anyone could help me out with this, I would appreciate it.

Also, as a side note - I am completely unable to interact with any of these objects - I cannot set something as a default device; there is no response when I do it, and disabling the audio device only works until current sources of sound (like videos) are restarted.

A:LG TV not playing sound when connected via HDMI cable

If you highlight the LG TV you should​ be able to set it as default. If not, it sounds lik a permission issue (like non-admin account).

2 more replies
Answer Match 69.3%

I have connected my HP Laptop with Windows 8 to my TV through an HDMI port. I watch netflix and youtube. A couple times a day the sound will just quit working. I check the audio and it says it is still hooked up to the TV. The only way I can figure out how to get it working again is to restart the computer. This has never happened while audio was playing, just when it is not in use for a little while.

Any help would be appreciated.

Thanks!

Luke
 

A:Laptop connected to TV through HDMI Sound turns off every now and then

HP has tens of thousands of different laptops. Which exact one do you have? The full model number will be on a sticker on the bottom and will be similar to DV9240ca or DV6-2130us.
 

3 more replies
Answer Match 69.3%

I used to be able to connect my r11 to the TV and get sound.  For some reason, this has now stopped.  I have been through all the forums and tried various options to no avail. All help gratefully received.

More replies
Answer Match 69.3%

www.sevenforums.com/sound-audio/228558-hdmi-sound-output-problems-2.html

Dear Experts

I am using windows 7 64 bit on my desktop (motherboard ASUS P5E)
ASUS - Motherboards- ASUS P5E

And I installed VGA SAPPHIRE HD 3870 (ATI RADEON Technology) 512 MB.
This VGA has a converter plug from DVI to HDMI.

Connected a 3 m HDMI cable from a converter to the Samsung TV.

I can see a picture on the TV but no sound

What I did for troubleshooting

1- download latest driver from AMD website from the link below :
AMD Catalyst
2- Follow the instructions here :
How to Set Up Audio on an ATI Radeon HD | eHow.com

No audio from HDTV when playing audio / video from a computer system

3- Digital Audio (HDMI) option was grayed out (not clickable) as can be seen in the snapshot below :

http://i46.tinypic.com/2d10aba.jpg

A:SAPPHIRE HD 3879 connected to TV via HDMI no sound

What is a Sapphire HD 3879? I can't find that model. I see a Sapphire HD 3870, is that what you mean?

Regardless, you aren't getting audio because DVI doesn't carry audio, so converting from DVI to HDMI won't give you audio.

8 more replies
Answer Match 69.3%

I have been using an HP Z display as an ext monitor, connected to my Pavilion 15 notebook using the hdmi port.  Following an update 2 days ago, the monitor no longer receives a signal from the hdmi port.  (I know the monitor and cable are ok as they work on another laptop). Any help or suggestions how to resolve this issue will be great!

More replies
Answer Match 68.46%

Hi

I have connect my laptop using an HDMI cable to my TV. And from my tv I have connected my two HiFi speakers. When the TV is on an AV channel I have sound coming from the TV and HiFi speakers but when I switch it to the HDMI source channel, sound only comes from the TV and not HiFi speakers.

This is frustrating because I want to watch movies on my TV through my laptop and get the feel of some surround sound through the HiFi speakers but it is not working!!!!

Please Help!

Thanks

A:No sound to HiFi speakers when HDMI Cable Connected

The problem is not your PC but your TV and how it handles HDMI audio. There is nothing we can do for this, it is strictly an issue with your TV and how it routes audio internally (or to external devices).

2 more replies
Answer Match 68.46%

I just installed a gigabyte hd4350 in my hp a1520n desktop bc it has an hdmi output. picture looks good, sound works, however when the hdmi cable is connected to the my samsung lcd tv, i get no sound through my computer speakers even when im not using the tv as a monitor or when the tv is turned off. i get sound through the tv though. when i unplug the hdmi cable from the tv, i get sound on the computer.

is there a fix for this? i have onboard sound enabled in the bios.

i have windows xp 32bit. in the sound and audio device properties, under the audio tab, default device, i see both realtek hd audio output and ati hd audio rear ouput when the hdmi cable is connected. when its not connected, just realtek hd audio is available.

i know i cannot have sound coming through the tv and computer speakers at the same time. is it possible for the sound to be switched back to the computer speakers when the tv is off WITHOUT having to unplug the hdmi cable that goes to the tv?
 

A:no sound through computer speakers when hdmi cable connected to tv

Weeell. Have you even tried setting the "Default audio playback device" (or whatever, in control panel->sounds->defaults tab to Realtek HD audio when the cable is plugged?
 

3 more replies
Answer Match 66.36%

Hi guys,

I decided to purchase a Samsung LED monitor and have connected it up to my pc using a HDMI cable. I recieve the picture on the screen but no audio, been spending the majority of today trying to solve the issue but have landed short.

My set up is a AMD A10-5800K APU, 8 GB ram and using windows 7 64 bit. The monitor I purchased is a Samsung LED monitor T32E310EX.

Currently the speaker symbol has an x next to it, when I click it it tries to fix the problem. When I right click it and go to playback device it shows Digital Audio HDMI (High Definition Audio Device) as my default device but no sound bars next to it. If anyone could help me out that would be great thanks

A:New monitor, HDMI connection between Pc and monitor but no sound

Have you configured your speaker setup to use Monitor Speakers rather than external speakers?

1 more replies
Answer Match 65.1%

Just got a new monitor today, Samsung S24D300HL which I have plugged into my Nvidia Geforce GTX 745 video card via HDMI.

Picture is great no problems there. However I have no sound at all. I've updated my graphics driver via Nvidia Experience program version 361.43 I've right clicked and went to Nvidia control panel audio tab and my monitor was listed there as audio under HDMI still no sound. I've restarted the computer a couple times. Checked Windows update. Switch to a different HDMI cord and still no sound. I've right clicked the speaker in the taskbar and went to playback and what I have is. Nvidia HDMI Output (Port 0) and Nvidia HDMI Output (Port 1) both say not plugged in. I'm confused about the Port 0 and Port 1 because there is only one HDMI spot on the back of the card.

Any help appreciated.
Thank you

A:New Monitor No Sound from HDMI

Have you set it as default in Sound?

more replies
Answer Match 65.1%

Just got a new monitor today, Samsung S24D300HL which I have plugged into my Nvidia Geforce GTX 745 video card via HDMI.

Picture is great no problems there. However I have no sound at all. I've updated my graphics driver via Nvidia Experience program version 361.43 I've right clicked and went to Nvidia control panel audio tab and my monitor was listed there as audio under HDMI still no sound. I've restarted the computer a couple times. Checked Windows update. Switch to a different HDMI cord and still no sound. I've right clicked the speaker in the taskbar and went to playback and what I have is. Nvidia HDMI Output (Port 0) and Nvidia HDMI Output (Port 1) both say not plugged in. I'm confused about the Port 0 and Port 1 because there is only one HDMI spot on the back of the card.

Any help appreciated.
Thank you

A:New Monitor No Sound from HDMI

Have you set it as default in Sound?

2 more replies
Answer Match 64.68%

Hello guys, I bought a new monitor from LG and connected it via HDMI to my laptop but the sound does not work on the speakers of my monitor could you help me please???

A:No Sound via HDMI on monitor speakers??!!!!?!!

Set it as Default Device, and Disable the Intel device. Then restart.

5 more replies
Answer Match 64.68%

Very helpful forum so thanks in advance for addressing this -

I have an Asus laptop running Intel Display Audio and I have it connected to an external monitor via HDMI. I also have external logitech speakers, which for whatever reason, sound a lot better when plugged in to the monitor than the headphone jack of the laptop (which has a much muddier sound). I want to be able to play music when the monitor is off/sleep, however when I do that, obviously the sound turns off. The settings on the monitor were pretty basic and didn't see anything to change it. Is there any workaround?

A:Playing Sound via HDMI When Monitor Is Off

You could get an hdmi switch that separates out the audio. The one linked below is a example, there are cheaper alternatives too.

Amazon.com: Monoprice 4x1 HDMI Switch w/ TOSlink & Digital Coaxial Audio Output (Audio Return Channel/3D/CEC Support): Electronics

3 more replies
Answer Match 64.68%

I've enjoyed a lot of the useful information from you all on this forum. My problem is that when I connect my Acer Aspire 5810T Laptop to my Asus Monitor MT276 via HDMI, I get video on my Asus but no sound through its speakers. I'm getting sound through my laptop though.

I'm unable to see the HDMI sound icon when I use "Manage Audio Devices" even though I checked to show disabled and disconnected devices. I think it may be because of my graphics or sound card (which I've tried updating via device manager but still no luck).

My system specs are to the right and if you require any other information let me know. Any suggestions on how I can get sound through the monitor's speakers?

[SOLVED]

I now get sound and video via HDMI through my Asus monitor. The way I got it to work was by updated my chipset driver to an older version.

Steps I took:
1) Go to Device Manager
2) Open Display Adapters and right click and select Update Driver Software
3) Select Browse my computer for driver software
4) Select Let me pick from a list of device drivers on my computer
5) I then was given a list of drivers and selected the oldest version (2/26/09)

I restarted my computer and plugged in the HDMI and the HDMI icon magically showed up when I went into Playback Devices.

I have updated the OP to show my solution. Thank you all for your help. You guys have a very good community here.

A:No sound via HDMI to ASUS Monitor

Go to the Control Panel/Hardware and Sound and finally the Sound panel. If you have HDMI Audio, there will be an icon for this. Set this as the default playback device and that should get you HDMI Audio.

9 more replies
Answer Match 64.68%

My problem is that when I connect my Motherboard to my ASUS VS247HR 23.6 Monitor via HDMI,
I get display/video output fine but no sound through its speakers.
Device Manager Screenshot:

Hardware and Sound:

System Specs:





Windows 10 Pro x64
Cooler Master: MasterCase 5
VS Series? VS650 ? 650 Watt Power Supply
GIGABYTE - Motherboard - GA-H170M-D3H
Hydro Series? H55 Quiet CPU Cooler
Intel? Core? i7-6700K Processor (8M Cache, up to 4.20 GHz)
G.SKILL Ripjaws 4 Series 16GB (2 x 8GB) 288-Pin DDR4 SDRAM
NVIDIA GeForce GTX 750 Ti
Samsung SSD 850 EVO 500GB
ASUS VS247HR 23.6" Monitor, FHD (1920x1080), 2ms, HDMI, DVI-D, D-Sub
Logitech Media Keyboard & Mouse Combo MK200
D-Link DWA-123 Wireless N 150 USB Adapter Revision D

More replies
Answer Match 64.68%

hi,

i have an acer aspire revo nettop pc, running winxp sp3
i have great graphics but no audio using an HDMI cable

i feel the monitor (vizio tv) is configured properly, as it works
great (audio and video) with a laptop running win 7

any help? thanks in advance,

sidecar

More replies
Answer Match 64.68%

Sometime over the past 3 days i have lost the sound come through the Sync-Master SB550_s27B550v (HMDI) i am at a loss on how to restore the sound.
In the sound setting there is no monitor displayed only Speakers (front headphone jack works). & Realtek Digital Output.
in the Realtek setting i have mute the rear output device, when a front headphone plugged in.
i have also tried to run the sound of the monitor via the front jack and this wont even play sound through the monitor.
I can add any more details, and thanks for any help

Cheers Cassar

A:Loss of monitor sound via HDMI

You should have HDMI listed as a Sound Playback device. Whatever happend apparently removed or disabled that.

To start, go the the Souind Playback panel and RIGHT click in an empty spot in the panel and then LEFT click to show disabled and disconnected devices. If it now shows up you can set it as default and you should get sound back.

However, if its missing, reinstall your video display drivers and that should get it back.

6 more replies
Answer Match 64.68%

Hello, i recently purchased a new lg monitor and the sound isn't working on it. I have build in speakers on the monitor, and on the playback devices it says it playing sound but i hear nothing. I tried to used nvidia to fix the problem but nothing working atm any tips?

A:New monitor to hdmi , sound not working

Hi welcome to the forum

could you post a screen shot of the default playback device page.
also could you list make and model of monitor

1 more replies
Answer Match 64.68%

Despite going through the basic steps in disabling any other playback device but my monitor, I am still having trouble getting any sound on my monitor. I have an Asus VS238H-P and it is plugged from my laptop by a HDMI cable. Here is what I currently have:




Any idea what is wrong? If any additional information is needed, I'd be glad to provide it to you.

A:No sound via HDMI to ASUS Monitor

tnguyen9175 welcome to the Seven Forums.

Is this the monitor?

http://www.asus.com/Monitors_Projectors/VS238H/

If so it doesn't have any speakers in it. What it has is a headphone jack on the back, which would require self powered speakers of headphones to get sound from it.

P.S. You also don't have the driver for the built in audio, as it is showing as "high definition audio device". It would show the proper name of whatever the built in audio is (Realtek, IDT, etc) with the proper driver installed.

1 more replies
Answer Match 63.84%

Problem: AMD HDMI output would not play sound via HDMI cable to monitor speakers.

Testing the AMD HDMI sound output gave the following error message:

Device in use by another application?

This FIX worked for this hardware configuration.

? MSI motherboard
? Realtek Audio onboard (built into motherboard)
? AMD Video board installed withHDMI cable to monitor
? See how the Device Manager sound devices should look when correctly configured below.

Issue(s):

1. The Realtek HDMI Drivers had been assigned to the AMD HDMI card under Device Manager, Sound, Video and Game Controllers.

2. There are multiple hardware devices/drivers that are conflicting.

Actions Required:

1. There are 2 instances of the AMD HDMI card that should be shown under Device Manager.

2. You must uninstall the Realtek hardware and drivers so that only the AMD HDMI device is showing.

3. The AMD HDMI and Microsoft device drivers must be assigned to the AMD hardware.

How to fix:
1. Under the Device Manager sub-heading ?Audio inputs and outputs?
? AMD HDMI Output (High definition Audio device)
? Right click and select Properties, Driver, should show driver provided by: Microsoft

2. Under the heading ?Sound, Video and Game Controllers?
? AMD High definition audio device
? Right click on the device to display the menu window
? Select Properties, Driver tab
? Driver Provider should say: Advanced Micro Devices
If t... Read more

A:FIX - AMD HDMI no sound output to monitor speakers

Originally Posted by laserlight


Problem: AMD HDMI output would not play sound via HDMI cable to monitor speakers.

Testing the AMD HDMI sound output gave the following error message:

Device in use by another application?

This FIX worked for this hardware configuration.

? MSI motherboard
? Realtek Audio onboard (built into motherboard)
? AMD Video board installed withHDMI cable to monitor
? See how the Device Manager sound devices should look when correctly configured below.

Issue(s):

1. The Realtek HDMI Drivers had been assigned to the AMD HDMI card under Device Manager, Sound, Video and Game Controllers.

2. There are multiple hardware devices/drivers that are conflicting.

Actions Required:

1. There are 2 instances of the AMD HDMI card that should be shown under Device Manager.

2. You must uninstall the Realtek hardware and drivers so that only the AMD HDMI device is showing.

3. The AMD HDMI and Microsoft device drivers must be assigned to the AMD hardware.

How to fix:
1. Under the Device Manager sub-heading ?Audio inputs and outputs?
? AMD HDMI Output (High definition Audio device)
? Right click and select Properties, Driver, should show driver provided by: Microsoft

2. Under the heading ?Sound, Video and Game Controllers?
? AMD High definition audio device
? Right click on the device to display the menu window
? Select Properties, Driver tab
? Driver Provider should say: Advanced Micro Devices
If the driver provider is wrong you will need to... Read more

2 more replies
Answer Match 63.84%

Hey all,

So I recently just picked up a new 27" Samsung Monitor, here is the link: http://www.amazon.com/Samsung-S24D5...=UTF8&qid=1427052003&sr=1-4&keywords=s27e390h

For some reason I can't get the sound to work. It's hooked up via an HDMI cable to my Nvidia Geforce 750 TI GPU. This is the same HDMI cable that was used with my old monitor and there was no issues at all.

Though for some reason it's just not working for this monitor? I've made sure all drivers were installed, the monitor was set as default in sound control panels, tried all of the available options there in terms of default (HD audio device, digital audio, my monitor, etc) but I can't seem to get it to work..

Any ideas??

The green sound level bars are going up and down but nothing is just coming out of the speakers, so I'm not sure

Thanks guys. Very stressful.
 

A:New HDMI Monitor -- No Sound? Advice Appreciated!

Hi CoryARamirez, and welcome to TSG.

Are you talking about amplified speakers plugged into the headphone jack on the monitor? As far as I can tell, the monitor itself does not have built-in speakers.

http://downloadcenter.samsung.com/content/UM/201412/20141230174041127/BN46-00444A-Eng.pdf

http://www.amazon.com/built-in-spea...m_cd_ql_tlc_al?_encoding=UTF8&asin=B00IEZGYI0
 

1 more replies
Answer Match 63.84%

Hello again - it's been a long time. I'm working on my Laptop now...

System:

HP dv9330ca laptop running Vista 64-bit. NVidea GE Force 7600 video and Conexant audio. 2GB RAM.

I hooked-up the HDMI cable from the lappy to the TV (Toshiba 32DT2U or 32C110U, not sure) and had no sound through the TV, so I...
Set the sound on the lappy to digital ouput (SPDIF) in Control Panel - still no sound.
Updated video drivers (after google and HP website suggestion)- we have sound (isn't this odd??).
Updated audio drivers - sound is gone (what the...??).
Rollback audio driver - still no sound -.-
Re-install video drivers - we have sound.
Reboot - we still have sound!!
Power down Toshiba display and power back on (left the lappy on and streaming audio and video) - no more sound
Re-install video drivers - still no sound

I have rebooted after all the mentioned steps above. I am making sure that the sound is set to digital in Control Panel but it isn't helping anymore, nor is the re-install of the video drivers. I am thinking that the rollback of the audio driver suggests that I should not try re-installing the newer one, as it seemed previously to cause a conflict.

As always, your suggestions are appreciated.

Thanks in advance!

A:HDMI LOSES sound at monitor power off

** UPDATE...

I did install the newer audio driver and got sound to work. I even re-booted and still had sound. However, when I powered down the system and came back a couple days later, I had no sound again!. Re-installed the audio driver - still no sound.

Any help would be appreciated.

Thanks!!

2 more replies
Answer Match 63%

I wanted a break from the HDMI sound through the monitor to use headphones, and after several other methods, I tried disabling the HDMI sound. That worked great, but now that option for playback device is completely gone! How do I get it back so I can use the (admittedly weak, but still functional) monitor sound?
 

A:Solved: Windows 7 HDMI sound through Acer monitor

Go to Control Panel > Sound. In the Sound popup screen, right-click on the screen and select "Show Disabled Devices".
 

3 more replies
Answer Match 63%

How do I disable my LG Monitor from automatically shutting off and starting the sound channel
when the sound channel is silent or muted.

I have an HDMI LG monitor with an AMD Video card.
I run my sound output from the AMD video card HDMI cable into the LG Hdmi monitor.

The audio works perfectly in all situations, except for the fact that, when there is no sound signal present
(" Muted or silent " ) the device temporarily disables until the next time sound plays, then it re-enables correctly.

the problem is it takes about .5 to 1. seconds to re-enable. which is annoying as FFFF sometimes. when Im playing 1 second long sound clips. the clip is over before the signal re enables. then turns off again as soon as the sound is over.

-------

It could be an AMD issue (considering that the sound runs via the hdmi cable out of the AMD card.)
or it could be an LG issue. Both decent companies. I bet its an LG Flaw (that will not exist on newer models.

A:Hdmi Monitor sound / auto shut off - on (ANNOYING)

This sounds like an issue with the AMD video card's sound or even deeper a PC issue. What are the 1 second sound clips? Does this happen with ALL sound or only certain sounds or from certain media players or games?

What do you have listed in the Device Manager for the Sound? Do you show the AMD HDMI and whatever PC sound card you have? and nothing else or do you also show other items.

Filling in the "My System Specs" helps those trying to help you with problems.

1 more replies
Answer Match 63%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, Intel64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 8191 Mb
Graphics Card: Windows Live Display Driver, 4 Mb
Hard Drives: C: Total - 953866 MB, Free - 649070 MB; I: Total - 476936 MB, Free - 358954 MB;
Motherboard: Gateway, FMCP7AM
Antivirus: AVG Anti-Virus Free Edition 2012, Updated and Enabled
 

A:no sound from hp monitor w/speakers & HDMI, model w2207h

Here, give this a look. Troubleshooting Sound Problems with Monitor Speakers
 

1 more replies
Answer Match 63%

Hello, i updated nvidia drivers yesterday i think and now today when i made playback sound on the lcd tv that i have connected trough hdmi to my gpu it doesn't play sound...

Every other device is working, etc 1 monitor have built in speaker, regular speakers and headset. They all working fine but whenever i try to playback for the TV it doesn't work.

I've tried to change the HDMI to a other port on the tv but doesn't work... I've checked that i haven't muted the TV.
Still nothing, i guess this has to have something to do with the update i made yesterday?
Though i'm pretty sure the sound worked after the update as i've watched tv with sound on it after the update... however now it's just gone. Could it be because it went to sleep then i went back to the pc and (it was in hibernation mode) then toggled back but no sound on the tv...
http://prntscr.com/b01iqt
http://prntscr.com/b01itn
http://prntscr.com/b01j2u

Thanks in advance
 

More replies
Answer Match 62.58%

Hi, I can't seem to get anything higher than 1920x1080 in the list of available resolution options when I connect my Dell U2713HM monitor to my Dell Inspiron 15 laptop. I've run this monitor at 2560x1440 on another laptop over HDMI in the past but that was with Windows 8. The Intel HD Graphics 530 Control Panel doesn't offer any resolutions above 1920x1080 for the external monitor and adding custom resolutions results in the error "the custom resolution exceeds the maximum bandwidth capacity". I'm using the same high speed HDMI cable that worked at 2560x1440 with this monitor on my previous laptop. I'm fully up to date on all of the drivers for the laptop.
Does anyone have any suggestions? I'm not sure what else to try. Could this be a Windows 10 issue? Should I try the standard Intel HD Graphics 530 drivers from the Intel website?

A:Dell Inspiron 15 7559 connected to Dell U2713HM monitor over HDMI can't do 2560x1440 resolution in Windows 10

Hi JonoBloo,
The hardware on the system supports the 2560x1440. It should be a software issue. I would suggest you to uninstall and reinstall the video card driver from Dell website as these drivers are tested on the Dell system. Please follow the steps mentioned below to uninstall the video card.

Press the Windows key and Start typing devmgmt.msc and then press enter.
Select the Display adapters listed and right click on it.
Now select properties.
In the properties window, under Driver tab, click on Uninstall button.
Check “Delete the driver software for this device.”
You want to delete the driver click OK.

After the uninstall finishes restart the system. Then reinstall the Intel video card driver for issue resolution. Please enter your service tag # on the link below, select the OS, then download the video card drivers from Video section onto the system and install it.
http://dell.to/18r60nI
Please let me know if this helps.

1 more replies
Answer Match 62.58%

ok so i bought my xbox 360 and then i was wondering where i should put the RCA red and white cables to since there is no place to put them in my monitor. i also have a 5.1 logitech surround sound system. is there anyway where i can have sound my 360 out of the surround sound?
 

A:xbox 360 connected to monitor and no sound!!! HELP

THe red and white cables are for sound, i presume by monitor you mean a pc monitor which most dont have sound. Can u plug the red and white into your Logitech surround system ? if there are different sockets on it you may be able to buy an adaptor in an electical store to do this.
 

2 more replies
Answer Match 61.74%

Had to replace motherboard from authorized acer parts dealer now I get no sound through HDMI port. I did through the original board until it got fried by electrical surge. Can any one help or send me a picture of the inside the same model to make sure all jumpers on the motherboard are in the right spot. Or if any one else had this problem tell me how you fix it. It does not have HDMI sound icon in the mixer. What I have done:
1. I have looked for disabled devices.
2. Tried looking in sound mixer settings for the default audio.
3. New install and drivers.
4. Tried a system utility software RegInOut. Looking for serious replies on fix even if it was not an Acer.

specs:
AMD Athlon II X4 Quad-Core Processor 640,
Windows 7 Home Premium,
NVIDIA GeForce 9200 Chipset, NVIDIA GeForce 9200 Graphics Integrated ,
4096MB DDR3 Memory,
1TB SATA Hard Drive (Green Product ? variable RPM),
16X DVD?R/RW SuperMulti Drive,
Multi-in-1 Digital Media Card Reader,
802.11b/g/n Wireless,
High Definition Audio with 5.1-Channel Audio Support,

Any help appericated

A:NO SOUND TROUGH HDMI ON ACER AX3400-U3032 and No HDMI Icon in sound se

Welcome to the Seven Forums

One thing you could try is to open up the Control panel then click on Sound and then go to the Playback tab and see if there is anything in there to enable it that's what I had to do on my laptop.

Jerry

9 more replies
Answer Match 58.8%

Hi there, My sound is not working. I only have a HDMI Sound output. However, I don't have any HDMI Output in my computer. I reinstalled windows a couple of times lately, but i don't know for sure if thats the problem.
Right now im using Windows 7 32-Bit, My hardware specs are: CPU: Intel Duo 2 Core. Graphics Card: AMD ATI Radeon HD 3800 Series. Any help or such will be Very much appreciated

A:Sound not working, Only have HDMI Sound Output, But no HDMI port in PC

the HDMI sound is most likely off your GPU but that series seems to not have a HDMI port so that is odd. If you can make sure your onboard audio is on in your BIOS and also run the tool on this page so that you can update all your system info for us. System Info - See Your System Specs

3 more replies
Answer Match 57.96%

Hi everyone.
I have an Alienware 15 R2 (i7 4720HQ, 970M, 16GB, FHD) running windows 10.
I have set it up in desktop mode by connecting it to ASUS MG28UQ 4K monitor, mouse and keyboard. The monitor is connected through the laptop's mini dp port.
The problem is that when I boot up the laptop with the monitor connected, the laptop's internal sound card (SoundBlaster Redcon 3di) does not function, and is not available in the audio playback devices menu. The intel display audio works, though.
But when i shut down the laptop, disconnect the monitor, and then boot it back up, the sound card is detected and functional, and stays funtional even after i connect the monitor to laptop after it has booted. It keeps working until i reboot, after rebooting the same thing happens.
Any ideas what might be going wrong?

Things i tried:
reinstalled sound card driver
windows troubleshoot

Thanks in advance  

A:Sound Card not detected when laptop boots up with external monitor (mini dp) connected - Alienware 15 R2 (4720HQ)

First, make sure that the display audio device is not 'disabled' in Device Manager. When connected through HDMI this should be enabled. If it is disabled, try enabling it and see if that resolves the problem.

Second, I would suggest downloading the latest graphics drivers from Intel. This should also update the HDMI audio drivers, and may fix the problem. You may also need 4th Generation or later CPU graphics drivers. You may want to download Intel's driver updater, to automatically search for drivers.

1 more replies
Answer Match 55.44%

Hi,

I have an Asrock ION 330 HT BD with a Sony Bravia 720p attached (HDMI to HDMI). When I start up my PC, the screen remains black. Only after I plug in a second monitor, both screens work just fine. When I pull the second monitor out, the Bravia also stops getting a signal. Seems a bit weird.. How can I get it to work with just the Bravia attached?

Thanks,
Gijs

A:HDMI to HDMI only working with second monitor attached

Hi and welcome to the forum.

Have you made sure your graphics card driver is up to date?

Have you tried starting your PC up in safe mode and seeing if the problem still persists?

Please ensure you have done both of these and then post back; it would also be helpful if we knew your system specifications which you can fill in under 'User CP'.

Also does the task bar appear on the primary monitor or secondary monitor?


Oli

9 more replies
Answer Match 55.44%

I have a video card with both a DVI and an HDMI output and a monitor with only an HDMI input. Should I connect my monitor to my PC with an HDMI cable or with a DVI - HDMI cable?

A:Should I use an HDMI or HDMI-DVI cable to connect to my monitor?

Hdmi

4 more replies
Answer Match 55.02%

After connected my dell XPS 13 with Dell 34" ultra monitor via Kensington SD4000 universal docking station. Have video but no sound coming out from my ultra wide monitor. The only sound that I heard was from the XPS laptop. My Laptop's OS is window 10 and I tried to use Chrome and explorer Edge, none of the search engine is able to solve the problem. Moreover, I checked my all connective cables to/from the docking station and it seems fine to me. Please help!!!!!!!!!!!!

More replies
Answer Match 54.18%

Hey, I've been looking for help for this for 2 days straight and still haven't found any help.

Basicly about 3 or 4 weeks ago, my motherboard or graphics card went, i had the computer repaired and it arrived a few days ago.

I've plugged it all in but i can't get any sound.
I've changed my Bios, uninstalled and reinstalled drivers, did some roll backs, plugged in the S/pdif cable altered my properties and still no luck.

Can anyone help me?

The screen shot below is of what my Playback Devices panel looks like when iTunes is on.
I'll give any information i can.
 

A:HDMI to HDMI, Great Picture, no sound. Need Help.

9 more replies
Answer Match 53.76%

Hi,

So eagerly i tought to buy this cool looking laptop for a huge $2000 i needed it to output to a hdmi monitor ot TV so sometimes i could see movies as well, now i had to buy the special DA200 dell adaptor and in the past 3 weeks it`s been a complete nightmare, i WAS NEVER ABLE to make it work permanently. The chat support was no help at all usually simply resuming to try and replace the part but i do think the part is good and i didn't feel like waiting 2 weeks for it to ship from china.

The ethernet and usb work on the DA200 adaptor , EXCEPT HDMI.  SOMETIMES it would work briefly until next restart, i had tried everything ever available on the internet. The laptop is running Windows 10 (as it`s restricted to that version, i tried to install other versions with lots of issues and compatibility issues) so  i have installed reinstalled and installed different versions of the video driver for all possible windowses and none worked. what did work was very brief until next restart and that usually happened when i had a fresh windows install, after the first restart i will get a non working hdmi again.  

I have tried several hdmi cables so i know it`s not the hdmi cable or the tv ot the monitor. and nobody seems to be able to help!!

A:dell xps 13 9450 (2015 new version) does not output HDMI to tv or monitor via special dell DA200 Hdmi adaptor

Oops I see my first post got sent, even if the website failed...
Anyay.. I talked to Dell Support and they told me to update the firmware for:
Intel (R) Thunderbolt 3 Firmware Update
(version 02.05.04,A00)
downloaded forn Dell.com/support
Enter your service tag and you will find it under Chipset on the driver download page.
That fixed it for me!
It was a known issue for the guy i talked to.

9 more replies
Answer Match 52.5%

I have a HP Pavilion dv4-1435dx laptop. TV is Dynex LCD (one of those no name brand ones ) I checked the drivers on the laptop, they all seem to be up to date. However when I go to Control panel-Sound-Manage audio devices, there is no icon with an HDMI label to select for playback device. How do I add the driver for HDMI (to select)?

I have scanned (and tried) numerous suggestions on this type of a problem on different sites on the web (including this one, under a different thread)

Any suggestions, other than try a new cable?
Thank you in advance.

A:No audio When PC connected to TV by HDMI

Welcome to SevenForums.

In Sounds / Playback make sure it is not disabled and hidden.
Rt click on the Sounds / Playback window to make sure "Show Disabled Devices" is checked.

If it is not there open Device Manager to see if is listed and there are no errors.
You can open Device Manger from Start/Search

3 more replies
Answer Match 52.5%

Hello everyone!

First of all i would like to thank everyone for the answers and help you share and i am new to this forum. I tried to search before making this thread but i havent found any answer that could help me.

I just bought 2 LCD monitors ( Acer and Asus) they all work perfectly But i have a problem, a huge one. The Asus monitor refuses to work when the VGA (acer) is connected and vice versa.

The Asus is a 23" LCD monitor, its connected via HDMI.
The Acer is a 18,5" LCD monitor, its connected via VGA.
My laptop is an Acer 7736, 2,20 GHZ, 4 GB RAM, 1GB graphic card from ATI Radeon.
So i beg you please to help me, i have tried everything possible, been trying for the last 7 hours and i even downloaded Ultramon but it doenst work either.

I only want them to work in same time, what can i do?

Here is the link, i even tried updating the drivers on the graphic card but nothing works.
Thanks in advance!!!

A:HDMI trouble when VGA connected

A lot of laptops do not have the ability to go to more than two monitors (Edit: this is including laptop as monitor). You can probably have both work if you close your laptop lid, otherwise, only the laptop and VGA or laptop and HDMI will work. (Edit: if you close laptop lid, the two monitors VGA and HDMI will work but only with laptop monitor closed)

I think there is a piece of hardware you can purchase that can turn a USB port into and external display adapter, but I don't know if it was GFX card specific or if your card needs or supports a particular piece.

My laptop suffers from this as well. I tried it and confirmed it after seeing issue on this forum a few weeks ago.

9 more replies
Answer Match 52.5%

I have Quadro DVD-922 connected with HDTV via HDMI.

Video output is set to HD, but when I try to play an HD file - it doesn't work.

What should I do to be able to play HD videos?
 

More replies
Answer Match 52.5%

hello 
when i connect my TV ( samsung) with HDMI to my Sony vaio i can not play the audio on the TV( after i commute to AV- HDMI ) 
only after i reboot my laptop with the HDMI connected. 
after that i can play a movie with audio on TV. 

can u tell me why ? 
i run Win 8.1

thank you 
Alex 

More replies
Answer Match 52.5%

First of all sorry if it's not that Windows related!
So the problem is that my LCD TV has a scrambled picture when my computer is turned on and connected to the TV via HDMI. I got analog signal TV connection but the picture is fine while the PC is turned off. Yeah I know I should get digi TV but till then I would like to sort this out. The TV is a Samsung 40" LCD model LE40A336. It has 2 HDMI input ports. Tryed both with same results. BTW if I remember it right, I had the PC connected via VGA last weekend and didn't have this problem. I will double check it in the morning.
Maybe I'm using wrong setting with PC... wrong Hz or sth. Anyhow maybe someone has had similar problems and solved it.
PC:
GTX 470 DVI->HDMI
i5 2500K
Windows 7 x64
EDIT: The TV is the only monitor connected to the PC via HDMI. Sound is passing through the HDMI cable aswell.

A:TV scrambled while PC is connected via HDMI

  
Quote: Originally Posted by karelo


First of all sorry if it's not that Windows related!
So the problem is that my LCD TV has a scrambled picture when my computer is turned on and connected to the TV via HDMI. I got analog signal TV connection but the picture is fine while the PC is turned off. Yeah I know I should get digi TV but till then I would like to sort this out. The TV is a Samsung 40" LCD model LE40A336. It has 2 HDMI input ports. Tryed both with same results. BTW if I remember it right, I had the PC connected via VGA last weekend and didn't have this problem. I will double check it in the morning.
Maybe I'm using wrong setting with PC... wrong Hz or sth. Anyhow maybe someone has had similar problems and solved it.
PC:
GTX 470 DVI->HDMI
i5 2500K
Windows 7 x64
EDIT: The TV is the only monitor connected to the PC via HDMI. Sound is passing through the HDMI cable aswell.


the VGA doesn't transfer data signals through digital technology, it uses analog, that's why the picture appears correct on the VGA, the HDMi though uses a technology called HDCP handshaking, the PC needs to handshake the display for it to show the images being encrypted from the desktop, if that handshake doesn't take place then the image will appear scrambled.

you can read up about HDCP here High-bandwidth Digital Content Protection - Wikipedia, the free encyclopedia but your options are just to use the VGA cable, or if it is a software fault then ... Read more

6 more replies
Answer Match 52.5%

I just connected my VIORE hdmi to my new PC with Win 7 Ati Radeon graphics and my screen picture is bigger than the display. Icons are cut in half on the left, cannot see start or time on the bottom or left or right. Display section calls it a CV TV15

how do I adjust the screen logical to fit the screen physical. This is the 1st monitor I have had that did not have buttons do do this
 

A:VIORE HDMI WIN 7I just connected my VIORE hdmi to my new PC with Win 7 Ati Radeon gra

You need to adjust the graphics settings for the correct resolution for the TV.
 

2 more replies
Answer Match 52.08%

I have the 2nd setup through a vga to hdmi cable but it just sits there black with "check signal cable."

2nd monitor is an lg2241

Tried:

- multiple re-boots
- downloaded a driver from LG but don't see that it did any kind of install. Double clicking it's zip file opened it and clicking on the three files did nothing but open gibberish code.
- at screen resolution I see multiple displays and I have it set on extended.
- Clicked detect and identify
- #2 says display device on vga
- tried unplugging and reconnecting the cable (hdmi to vga)

I'm lost. SOS!

lol!

Thx,
Dave

A:Dual monitor setup hdmi to vga on 2nd monitor shows nothing

Dave welcome to the Seven Forums.

That cable won't work unless the VGA port on the computer/laptop supports digital (highly unlikely), as VGA is an analogue signal and HDMI is digital. To get it to work you would need some kind of converter not an adapter, which that cable essentially is.

Assuming this is your monitor,

LG E2241V-BN: 22" Full HD LED LCD Monitor | LG USA

is says it has a VGA port on it. If it does then just use a plain old VGA cable.

9 more replies
Answer Match 52.08%

Hey guys,
I updated my windows 7 acer to windows 10 while i was connected to my tv screen via hdmi... but now my screen doesnt show up on my laptop at all. It only shows up once i connect my laptop to my tv via hdmi... so i cant actually use my laptop without my tv screen which is difficult while trying to study... i am desperate to get this fixed... if anyone has any ideas please let me know

More replies
Answer Match 52.08%

Hi I have a strange problem with my b540p Ideacentre. If istart the computer without an hdmi cable connected, the screen just doesn't start, it never turns on. However, if I turn of the computer, plug in an hdmi cable in the out port, and start it works (regardless of wether or not the hhdmi cable is connected to anything. What is the deal with this, and how do I fix it?

A:B540p Only starts if HDMI is connected

I have the same problem.  I was connect to LG tv from hdmi out and now I can't turn on my computer without disconnect hdmi. I've tried set from screen resolution and set to 'show desktop only on 2' and when i disconnect and restart then there is blank screen, but when i connect hdmi then it work.  Please help.

3 more replies
Answer Match 52.08%

Today my notebook Asus M50Vn suddenly started to behave weird. While it's connected to plasma via HDMI, everything starts to stutter a bit, which is very inconvenient in videos. It works like this: 0,5 s of fluid picture, 0,1 s of freeze, 0,5 s of fluid picture, and so on.

Situation is the same on primary (built-in) monitor and secondary (plasma), as well as on youtube, VLC, PotPlayer and MPC HC. DXVA and CUDA won't make any difference, choosing different video renders in player's settings won't do the help as well. I've already tried to install older and newer drivers (graphics is Geforce 9650m GT) but it didn't help.

Computer is 100 % virus free, there is COMODO IS for on-access security and I've also checked it with malwarebytes, hitman pro, emsisoft emergency kit, kaspersky tdss killer and CCE. Almost all processes are disabled.

It's interesting because there's no problems when plasma is connected via VGA.

Unfortunately there's no useful system restore points.

Does anybody have any idea what could be wrong? Thanks in advance.

More replies
Answer Match 52.08%

Today my notebook Asus M50Vn suddenly started to behave weird. While it's connected to plasma via HDMI, everything starts to stutter a bit, which is very inconvenient in videos. It works like this: 0,5 s of fluid picture, 0,1 s of freeze, 0,5 s of fluid picture, and so on.

Situation is the same on primary (built-in) monitor and secondary (plasma), as well as on youtube, VLC, PotPlayer and MPC HC. DXVA and CUDA won't make any difference, choosing different video renders in player's settings won't do the help as well. I've already tried to install older and newer drivers (graphics is Geforce 9650m GT) but it didn't help.

Computer is 100 % virus free, there is COMODO IS for on-access security and I've also checked it with malwarebytes, hitman pro, emsisoft emergency kit, kaspersky tdss killer and CCE. Almost all processes are disabled.

It's interesting because there's no problems when plasma is connected via VGA.

Unfortunately there's no useful system restore points.

Does anybody have any idea what could be wrong? Thanks in advance.

A:Notebook Is Slow While Connected To HDMI

Well normally I'd have said it was just your laptop struggling to upscale the image due to hardware limitations. But a 9650gt should be more than capable.
What happens if you disable the laptop screen and just use the tv as a primary monitor?

Erm.. Try a different HDMI lead and lower the resolution a little. But that's clutching at straws lol

5 more replies
Answer Match 52.08%

I wish to connect the HDMI to a video projector and the audio port to a sound mixing desk. Either audio or video works fine alone but when both cables connected am getting high-pitched feedback into the sound system. I have tried disabling HDMI as an audio device but it makes no difference. Have tried more than one HDMI and audio cable - same result.  

More replies
Answer Match 52.08%

I have an Elitebook 8530p that I am trying to connect to my TV so I can view online TV on my TV screen. I can stream the online TV and watch it on the laptop ok, and I can connect the laptop to the TV with HDMI cord and I see the picture on the TV too, but as soon as I push the play button and it starts to stream the Laptop freezes. This happens on both TV's in our house with different HDMI cords which leads me to believe it is an issue with the laptop (not the TV's or cords). I have tried pushing the Fn + F4 buttons to clone it but that makes no difference. I have tried changing the display settings but I don't really know what I am doing! Another post said to choose full HDMI setting but even though the laptop has a HMDI port it didn't appear to have that setting. Is it too old?
 

A:Laptop freezes when connected to TV through HDMI

The problem is most likely the video card driver, so yes technically your laptop is too old, but luckily you can save that geezer! If updating the drivers doesn't work then you can try changing resolutions.

Solution found here:
http://answers.microsoft.com/en-us/...o/7fafd27d-816f-456c-afa6-3c7fec3909e3?auth=1
a. Click Start, and then click Control Panel.

b. Click System and Maintenance, click System, and then click Device Manager.
Note If Control Panel is in Classic View, double-click System, and then click Device Manager.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.

c. In Device Manager, expand Display Adapters, right-click the display devices, and then click properties and under the driver tab click on Uninstall.

d. When you are prompted to confirm that you want to remove the device, click OK.

e. Restart the computer.

After the computer restarts, the drivers will be automatically installed. Check after this procedure. Also check if you have any exclamation mark or cross marks alongside the display devices listed in device manager.
You can update the drivers using windows update. Refer to the below mentioned link and use the steps provided accordingly -http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly

You may also check if there are any updates for the drivers at the manufacturer website. You may even install the latest drivers from the manufacturer... Read more

3 more replies
Answer Match 52.08%

Hey guys,

I'd really appreciate your expert assistance!

I've got an Origin Eon-17 SLX laptop that has recently gone out of warranty. I'm getting very frequent BSODs on start up, and it seems to happen almost every time if I have something connected to the HDMI output. It usually will BSOD, then restart fine.

I've tried a fresh install of 8.1, to no avail.

Please find the logs attached.

Many, many thank yous in advance!

A:BSOD often on start up, especially with HDMI connected

Hi mkbcnr33 & welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Thu Apr 9 03:42:31.874 2015 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\040915-4734-01.dmp]

Windows 8 Kernel Version 9600 MP (8 procs) Free x64

Built by: 9600.17668.amd64fre.winblue_r8.150127-1500

System Uptime: 0 days 11:14:33.575

Probably caused by : ntkrnlmp.exe ( nt!KiFastFailDispatch+d0 )

BugCheck 139, {3, ffffd000248f7500, ffffd000248f7458, 0}
BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)

Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd000248f7500, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd000248f7458, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
BUGCHECK_STR: 0x139

DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x139_3_nt!KiFastFailDispatch

CPUID: "Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz"

MaxSpeed: 2700

CurrentSpeed: 2694

BIOS Version 4.6.5

BIOS Release Date 02/14/2014

Manufacturer Notebook

Product Name P17SM-A

?????????????????????????????????????????????????????????????????????... Read more

3 more replies
Answer Match 52.08%

Today my notebook Asus M50Vn suddenly started to behave weird. While it's connected to plasma via HDMI, everything starts to stutter a bit, which is very inconvenient in videos. It works like this: 0,5 s of fluid picture, 0,1 s of freeze, 0,5 s of fluid picture, and so on.

Situation is the same on primary (built-in) monitor and secondary (plasma), as well as on youtube, VLC, PotPlayer and MPC HC. DXVA and CUDA won't make any difference, choosing different video renders in player's settings won't do the help as well. I've already tried to install older and newer drivers (graphics is Geforce 9650m GT) but it didn't help.

Computer is 100 % virus free, there is COMODO IS for on-access security and I've also checked it with malwarebytes, hitman pro, emsisoft emergency kit, kaspersky tdss killer and CCE. Almost all processes are disabled.

It's interesting because there's no problems when plasma is connected via VGA.

Unfortunately there's no useful system restore points.

Does anybody have any idea what could be wrong? Thanks in advance.
 

More replies
Answer Match 52.08%

Hi,
I just did a fresh install of Win 8.1 last week and my TV which is connected via HDMI is not getting detected as a display on my PC. My monitor was detected fine.

When i right click my desktop and go to screen resolution, the TV doesnt show up there even post clicking detect. Same if i go into AMD CCC and click on detect.

However Win 8.1 can detect it. The TV is seen in device manager under digital media device and i can see the TV under Devices and Printers in Control Panel. I've tried troubleshooting it but it says everything is fine.
But I need it to come up as a display so i can use it as a primary display at times or to duplicate display.

I had no such problems with Win 7. It would detect right off the bat.

Things ive tried:-
I've installed the Omega 14.12 drivers and the Beta 15.4 drivers.
I've tried installing them in Win 7 compatibility mode too, but the installer then wouldnt give me the option to install the display driver and the HDMI audio driver.

One thing i notice is that the driver for the TV is provided by Microsoft and the date of the driver is 6/21/2006! So maybe this needs to be updated. I tried to click on update driver but it says my driver is up to date.

I also have all the latest windows updates installed.

so not sure what else to do here.

Please help.

A:Win 8.1 - TV connected via HDMI not detected as a Display

The 2006 device driver is simply the generic one which is normal, same one I get when TV is plugged in.
What HDMI port are you using? One on motherboard or one coming directly from GPU? This almost has to be a graphics driver problem.
Why would you try installing drivers in 7 compatibility mode? We are talking 8.1 here right? Have you tried drivers from manufacturers site?
A laptop or desktop? Motherboard and GPU make/model?
So, so many details you've left out.
Would help to have some system specs.

5 more replies
Answer Match 51.24%

Hello
 
I am facing some issues, when connecting my Dell E6440 laptop to my LG 55LB650V flat screen.
 
I connect the laptop to the TV via HDMI-cable and I have been trying different cables. The computer has both an Intel HD Graphics 4600 and an AMD Radeon HD 8690M graphic card.
 
When I connect my computer to the TV the screen starts flashing black, every 5 seconds or so. Every time I open a new program the screen flashes and it is also happening sometimes when I do not use the computer.
 
The computer runs at 1600x900 and the TV is a full HD. I have tried to alter the resolution to both and I also tried to use a custom scaling level of 120 % (as 1920 is 120 % of 1600). I have also changed the refresh rate to 59p HZ and 60p HZ, but that made no difference. I have found out that if using the 60i HZ the screen would not flash (at least it have not yet).
 
So at the moment I can use the computer on the TV, but of course I would like to know why the screen is flashing when using 59p or 60p HZ and know what I can do, so I could use these refresh rates.
 
I hope that someone could make me wiser on this problem and maybe give me a solution. If anyone knows, I would also be happy to know what the best custom scaling level to use when using a 1600x900 laptop on a full HD TV is.
 
I really appreciate any help. Thank you in advance!
 
I have recorded two videos that shows the problem:
Part 1: https://youtu.be/DzKU0a0qiqo
Part 2: https://youtu.be/r... Read more

A:Dell E6440 flashing when connected to TV via HDMI

Can anyone please help?

2 more replies
Answer Match 51.24%

Hey guys, I'm actually new here, so I am not sure if this is in the right forum page, but I need help. I have had a problem with my HDTV and laptop for a few months and finally decided to start a thread for help. The problem is that the HDTV is blurry and fuzzy when connected to my laptop via HDMI. However, I realize this is an overscanning issue, because in the AMD Catalyst Control Center, whenever I set the scaling for overscanning to 0%, the fuzzy text and screen is fixed, but the edges around the screen like the taskbar are cutoff the edge of the screen. I do not think my TV has an option for "Just Scan", but maybe you guys can find something I can't. Here is the manual:

http://www.sansuiproducts.com/images.../SLED2280D.pdf

Also, I am running Windows 8.1 with an AMD Radeon HD 7520G graphics card.

Any help is appreciated, thanks.

A:Need help with my laptop connected to my HDTV (HDMI Cable)

Not sure I can help but I have the same thing. I have a cheap TV and I think it has more to do with that. I play videos is all and not an issue there, just desktop is expanded past screen.

My TV is only 720p.

I'd love to see if someone has a fix.

5 more replies
Answer Match 51.24%

I recently found out that every time i plug in a HDMI or Auxiliary cable, my computer crash. I tried changing the cable to see if that was the problem and it wasn't. I just don't know where to look to start fixing the problem. I've considered that maybe the connector is faulty, but i'm looking for option before going to that.

I use HDMI to connect my TV for movies
I use the auxiliary Cable to connect a speaker.
on different occasion.

A:Computer crashes after HDMI/Aux cable is connected

Did you try shutting the computer down, plugging in the cable then starting back up? I've crashed a computer when plugging in a USB Thumb/Flash drive, turned out it was caused by static electricity that I'd built up walking across a carpeted room, now have anti-static touch pads on my desks to touch before anything else.

3 more replies
Answer Match 51.24%

I connected the G50 to monitor and it not output any display.  VGA works fine but nothing from the hdmi.

A:G50 will not output video to hdmi connected monito...

Hi A1ci,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issue with system not able to connect to external monitor through HDMI on your IdeaPad G50.
 

Have you checked with different HDMI cable?
Are you connecting to External monitor or a Televisition?
Please check if the Graphic driver is updated? If not please download the file from the support site and install it.

http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-30-noteboo...
 
Hope this helps.
 
Best regards,
Hemanth Kumar




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Answer Match 51.24%

Been trying to figure out a problem with HDMI audio out and "not plugged in error"

HW is a motherboard with HD3200 and ALC889A HD with latest drivers.

Using a HDMI cable i get HDMI audio out, but if i switch inputs on the receiver then back HDMI audio is "not plugged in".

changing resolution brings it back as default device.

Tested a backed up vista image with ati 9.04 and realtek hdmi 2.23 drivers and it worked fine changing inputs on the receiver.

The same drivers in win7 did not resolve the issue, so im guessing theres something in win 7 that causes this

A:win7 bug with HDMI audio connected to receiver

if you have an HDMI capable receiver I am going to assume you have at least a 5.1 setup correct? And I am also going to assume that "HW is a motherboard with HD3200" means onbaord HD3200?

If yes then I would suggest using either the coaxial output or optical S/PDIF output to the receiver as you are not reciveing 8 channel LPCM through HDMI.

As to your actual problem I am setup same as you, however I am not having that problem... is video still able to pass through to your TV even in the audio not plugged in state?

7 more replies
Answer Match 51.24%

I have a brand new MSI Media Live box. The Installation process went fine except when it came to startup after installation. I always receive a blue screen and sometime I have the "irql_not_less_or_equal" message. The system works perfectly when I startup using the VGA connector. I have verified that HDMI does work if I startup using the VGA connector and then extend the desktop.

I have downloaded and install the Windows 7 driver from Nvidia. My card is Geforce 6150. The error descriped above happened using my Philips Tv and also my computer LCD screen.

Any Ideas?

A:Blue screen if startup with HDMI connected

If I remove the HDMI cable from the computer while it is starting up and plug it in again when the login screen has appeared then this works without problems. Also works when starting up from hibernation.

9 more replies
Answer Match 51.24%

Recently my hard drive went out and I had it replaced with a solid state drive. The problem I'm having now is when I hook up my Samsung Smart TV through an HDMI cable (also tried a new cable with same results) I get wavy, scrolling lines on my laptop that go away when I disconnect the cable. The lines don't show up on my TV and this didn't happen before having my computer repaired.

The Staples tech wants to charge me again for diagnosing it after paying over $270 for a diagnostics and replacement of the hard drive. He said it's not possible for it to be a problem with the new hard drive so it would be another charge even though it didn't do it before having it repaired and my computer reformatted. I'm concerned I'm going to burn something out if I keep using it this way but I also don't want to pay more if it's something simple. He said it could be the motherboard or graphics card but I'm not sure whether or not to trust him. I'm a senior with little technical knowledge.

I want to use an HDMI cable so I can watch Xfinity programming that's available online only. I can live with it doing this as long as it isn't hurting my computer. Any help or suggestions is greatly appreciated.

MSI Laptop - 3 years old
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 3886 Mb
Graphics Card: Int... Read more

A:Scrolling lines on laptop when connected to TV through HDMI

6 more replies
Answer Match 51.24%

I messed up display settings for when I attach a TV via HDMI to my laptop. I set the system to display only on the TV (OK, not a totally stupid idea) and then picked a resolution the TV doesn't support (that was TOTALLY stupid!) When I disconnect the TV, laptop display works as normal. As soon as I connect the TV, laptop screen blanks and TV goes to Invalid Format. I have tried to change display settings through the control panel with the TV disconnected, but as soon as I plug in the TV, it goes back to the bad resolution on the TV and no laptop display.

Is this stored in the registry somewhere? I want to reset the flag telling the system to display only on 2nd display.

Please help

A:Invalid Format when laptop connected to HDMI TV

Hi OldWraith, welcome to the Seven Forums.

This should work:Connect the TV, don't mind the Invalid Format warning
Press WIN + P to open Display Switch dialog. You don't see it as it's on the non-working TV display but trust me, it's there:
(Screenshot from our tutorial Display - Change Main Display)
Press Right Arrow > Press Enter to change from Display 2 only to Display 1 only
Now you should have the desktop on laptop's display, you can change your display settings as you wish
Kari

1 more replies
Answer Match 51.24%

Hi all,
Toshiba Satellite U400-157
Windows Vista Home Premium Intel Core(TM)Duo CPU T5900@2.20GHz; RAM 4.00GB
Display Adapter: Mobile Intel(R) 4 series Express Chipset Family
Stage 1
Laptop connected to Panasonic LCD 42" with HDMI cable
Both LCD screen and laptop monitor diplay correctly
Able to change display settings and control cursor at laptop
Everything is working fine

Stage 2 two weeks later
When HDMI cable is connected, Laptop screen goes black, but the LCD screen works fine and the cursor appears on the LCD and can be controlled by the laptop

Stage 3 two (more) weeks later
When HDMI cable is connected, Laptop screen goes black, LCD screen is blank, no cursor visible
I right click laptop screen, go to Graphic Properties>Display settings and try and change the Operating Mode: from Single display to Two
Primary Device: LCD
But these choices are not available.
I go to Control Panel> Personalization> Display Settings
Drop-down menu shows
1. Generic PnPMonitor on Mobile Intel(R) 4 series Express Chipset Family
Select down arrow
2. (Default Monitor) on Mobile Intel(R) 4 series Express Chipset Family appears

Connected HDMI cable and try again
I have two Black Screens ...!
Have tried restarting comp then TV, and vice versa, before and after connecting HDMI cable, but nothing works.
(all other independent operations on the laptop and the TV work perfectly well)

Yelp, help, please ...
TIA
Mukund
PS I did not post correctly, so I ... Read more

A:Black screen when laptop connected to TV via HDMI

Hello, Do you have another HDMI cable to try , if not, do you have a VGA cable to use ?

26 more replies
Answer Match 51.24%

System has two HDMI ports and one DVI. The DVI supports a monitor and HDMI is advertised as supporting two monitors. Neither of the HDMI ports are working. Contacted HP support and was told to return for warranty work (1 day old tower). Returned to store for replacement contacted HP support with second tower and was told same, return for warranty work. Contacted online support from another company went through several operations, drivers different connections, both monitor and TV and finally was told tower #2 was also defective. HP Envy 750-197c windows 10

A:Dual monitors not working when connected to HDMI

Hello @77-77-77,I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.If you are unfamiliar with how the Forum's private message capability works,this post has instructions. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great weekend!

1 more replies
Answer Match 51.24%

Hi there;

I recently got a lenovo z710 ideapad to replace my previous laptop and serve as a substantial increase in gaming potential. I usually game with my computer connected to an lcd tv with an hdmi cord. However, with the new laptop I am having incredibly constant BSOD issues.

The BSOD has specifically occurred in Bioshock: Infinite and Deus Ex: HR (I have not yet tested any other games significantly). I am normally able to play fine for some time, however after gaming for a variable amount of time my computer blue screens after trying to load a new map or level (either by fast travelling, moving from one map to another, or just from loading a savegame).

In the case of Deus Ex, I can quickly and reliably produce the error, if I run the game and load a save, then quit to desktop and repeat, the BSOD will occur within 2-3 cycles. There was no problem when running the game while not connected to my tv, even after 10 or so cycles.

So far, I've tried the following based on what I could find on the net:
-Verified integrity of the affected games
-re-download affected games
-search error codes on Microsoft's website (no luck)
-Used the Windows ErrorChecking tool to check for hard disk errors
-Complete un-installation of NVidia drivers and safe-mode wipe using Display-Driver-Uninstaller tool

Nothing seems to have any affect. I think (hope) it's a software issue, as the computer did originally come with Windows 8, which I removed and replaced with the Windows 7 ... Read more

A:BSOD while gaming on tv connected via hdmi; nvlddmkm.sys

From the sounds of it, you have a problem with your graphics card, and because it's a laptop it sounds like an overheating issue. You have a bugcheck of 0x116 which is a video tdr error which is generally caused by a faulty graphics card. Download Speccy to monitor your temperatures. Then post a screenshot here.

Speccy - System Information - Free Download

Then can you please run a stress test with furmark by following these instructions.

Video Card - Stress Test with Furmark


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa800ec49010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8800637e694, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.

Code:
fffff880`079eca48 fffff880`044bb140 : 00000000`00000116 fffffa80`0ec49010 fffff880`0637e694 ffffffff`c000009a : nt!KeBugCheckEx
fffff880`079eca50 f... Read more

9 more replies
Answer Match 51.24%

I fought this problem all day and I think I have it narrowed down. System is Lenovo Yoga 900 i7 with Windows 10 with all latest updates. Application is Citrix Receiver 4.5. When using Quickbooks with the Citrix Receiver, mouse clicks are disabled/not recognized.  All keyboard inputs still work, the mouse arrow tracks correctly, but mouse clicks seem to be ignored.  This behavior occurs when booting to dual monitor setup with HDMI adapter in the USB Type-C port; booting to single monitor (Yoga), then plugging the HDMIR adapter in the USB Type-C port.  The only resolution is to boot to single monitor (Yoga) and work in single monitor mode exclusively.  I am using the USB Type-C to HDMI adaptor purchased from Lenovo.  This occurs with the Yoga trackpad AND occurs with my USB wireless mouse. Also note with native Windows applications, the mouse works fine with both  monitors connected and active. I really bought the HDMI adaptor to use two monitor with the Citrix Receiver.  I have tried to Google this problem, but I'm unable to find a Citrix Receiver support site/forum that would be appropriate for this question. Any advice appreciated.

More replies
Answer Match 51.24%

Thanks for the update today Dell!
Been using my XPS 13 (9350) on 40" 4K monitor on TB15 dock and HDMI for a while at 30 Hz. Today, installed the updated video driver (2016-09-07) and got 50 Hz working with Plugable adapter! So, no need for the TB15 until it can also support 50 Hz or better
My setup:
Dell XPS 13 (9350) with latest drivers
PLUGABLE USB 3.1 TYPE-C TO HDMI 2.0 ADAPTER
Panasonic TX-40CX300E 40" 4K Ultra HD
= Jari =

More replies
Answer Match 51.24%

I know this is one that has been floating around the forums for a while but I have not been able to find anything that works in my situation. When I connect my laptop to my TV (Panasonic Viera Plasma) via an HDMI cable, I can get the video to show on the TV fine but there is no audio on the TV; it comes out of the laptop. I have tried everything I can think of including deleting the drivers then reinstalling them, updating them, rolling them back, etc., etc., etc. Here are the specs on my laptop:HP ENVY dv7 Notebook PCWindows 8.1 64-bit, 8GB RAMIntel(R) Core(TM) i5-3230M CPU @ 2.60GHzIntel(R) HD Graphics 4000Intel(R) Display Audio (with Beats Audio)IDT High Definition Audio CODEC Also, here is a snapshot of the Playback Devices:  As you can see, I have nothing which says "HDMI". I have gotten quite frustrated with not being able to get this to work. I would appreciate any help I can get. Thank you. Alex...

A:HP Envy dv7 - No Audio When Connected to TV by HDMI Cable; W...

Can someone please help...?

9 more replies
Answer Match 51.24%

Hi, new here. After searching for information on my problem I could not find a single thread with the same issue.
Having said that, here goes.

I just bought a new TV and attempted to connect it to my laptop via HDMI. I have used both the laptop and the cable with other TV's in the past with no problem but when I connect the two the laptop powers off as if the power has been cut. It will not boot when the two are connected and only happens when the TV is on. The laptop will boot into safe mode but it seems that HDMI out is disabled in safe mode so I cannot test it. I have checked and my graphics drivers are current. Hope someone can help! Thanks.

More Information: I have since exchanged for a different TV (Different Brand) for an unrelated issue and it doesn't work with this one either, same issue.

A:Laptop Shuts Down When HDMI Connected To Television

I found this article on the Forum not sure if it will be any help

Computer shuts down while TV is connected through HDMI

9 more replies
Answer Match 51.24%

I have a Toshiba satellite L305-S5875 I have it connected to my Vizio HDMI HDTV to watch netflix with. It has been working fine except for the past week. When I unplug the laptop to skype and then plug it back into the tv when I am done I get a, "NO RGB signal" message from the tv. I don't know why it is doing this, I have been able to use system restore to get it working again, but it is no longer working. Any ideas?
 

A:laptop connected to HDMI tv was working now keep getting no RGB signal

Try this:

Hold down the input button on the right side of the Tv. This is the bottom button
With the tv off, press and hold the bottom button (input)

When the TV powers up and you see the input menu, release and press the button
to change the mode to your preference.

Hope that helps.
 

1 more replies
Answer Match 51.24%

I've had my laptop for a while, and I've used my TV Screen as a secondary monitor a lot. A while ago my computer updated to windows 8.1 when I fell asleep on it and accidentally hit the update button when it came up (oops), making me have to use windows 8.1 now. Now I haven't had many problems with it, it works fine and dandy, but I do have a major problem when I try to use my second monitor. When I run a game or movie on it, the audio comes out from the laptop speakers, not the TV speakers. Previously, using windows 8, it would let me use both.

I know that if you go into the control panel and the sound systems that it should show two speakers, but for me it isn't. I've tried lots of different things and browsed the web for an answer, but I can't find anything.
Screenshot of my playback devices window:

If anyone knows how to get this to work, it'd be a big help!

A:HDMI connected second momitor not playing audio

According to your screen shot, you only have the PC audio (RealTek) and no HDMI audio. Reinstall the drivers for your video and see if that restores the HDMI audio.

No PC info posted, please fill in the "My System Specs". Helps us to try and help you.

I have both HDMI and PC audio on my Win 8.1 machines so it should work for you, if the PC is fully compatible.

1 more replies
Answer Match 51.24%

My headphone jack is busted, so I bought an HDMI to 3.5mm adapter so I could use my headphones that way. However, I can't get the laptop to send audio over HDMI because it doesn't think there's any device to receive that audio. How can I get Windows to route audio that way anyway? Everything I find is the opposite problem, where someone has a device plugged in and recognized but can't send audio to it.
OS: Windows 7
Model: Dell Inspiron 15r Special Edition
Processor: Intel Core i7-3612QM CPU @ 2.10GHz 2.10GHz
Graphics card: AMD Radeon HD 7730M
Adapter: click here

More replies
Answer Match 51.24%

Hey guys. I have connected my PC to my HDTV (Sansui), and I cannot find an option in the TV for 1:1 Pixel Mapping. I need this because my TV is overscanning my laptops display and the taskbar and other images are cut off the screen. It is also quite blurry. I have the TV's manual here:

http://www.sansuiproducts.com/images/manuals/SLED2280D.pdf

I could not find an option in the manual, but maybe you guys could.

Many thanks.
 

A:Need help with my laptop connected to my HDTV (HDMI Cable)

6 more replies
Answer Match 51.24%

I have connected my XPS L502X laptop to my Samsung lcd tv using an hdmi cable.
I do not have clone display as an option. I can only extend the display. My guess is that this has to do with the tv display being run from the nvidia graphics card and the laptop display being run from the integrated graphics. 
I am running Processor    Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 2001 Mhz, 4 Core(s), 8 Logical Processor(s)OS Name    Microsoft Windows 7 Home PremiumInstalled Physical Memory (RAM)    6.00 GB
I have updated to the latest bios and the latest drivers for the integrated and the nvidia graphics.
Is there anything I can do to see the same display on my laptop and my tv?
Thanks in advance for any help.

A:How do I clone display on XPS L502X - connected to TV by HDMI

Geekeleh
I certainly suggest making sure that you have the most up to date video driver.  The latest Dell drivers may be found from the following link.
http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=XPS_L502X&os=W764&osl=en&catid=&impid=
You may want to creat an Optimus profile for your applications to ensure that the NVIDIA GPU is being used over the integrated Intel solution.
To create a new profile for an application:

1. Open the NVIDIA Control Panel.
2. Select Manage 3D Settings.
3. Select Program Settings tab
4. Click Add button.
5. Browse to and select the application executable that needs the new profile.
6. Or choose the preferred application from the drop menu.
7. Select the features and settings you wish to change for this application.

Don't forget the basics, try another display if possible and see if the problem continues.  Try another HDMI cable to make sure that the cable is alright. \
Please, let me know what you find out.
 
TB 

33 more replies
Answer Match 51.24%

I have a dell laptop that has 1920x1080 resolution. However, i connect it to an external monitor that has 1920x1200 resolution. Basically almost everything i do is on my external monitor which acts as my main primary screen. Thus i do sometimes open some windows or drag a window or so to the other screen like youtube etc to the laptop screen which is the secondary monitor.


My issue at the moment is everything is way too big on the laptop screen. I want to have 1920x1080 resolution but its way too big. I googled what is my resolution on it and it shows 1536 x 864. Can someone tell me how to change this to 1920x1080? I googled what is my resolution on the external monitor and it does show 1920x1200 which is correct.


My external monitor which is my main monitor is fine at the moment with the 1920x1200. Its windows 10 but im assuming this should be very similar to windows 7 to fix this issue?

More replies
Answer Match 51.24%

I have a dell laptop that has 1920x1080 resolution. However, i connect it to an external monitor that has 1920x1200 resolution. Basically almost everything i do is on my external monitor which acts as my main primary screen. Thus i do sometimes open some windows or drag a window or so to the other screen like youtube etc to the laptop screen which is the secondary monitor.


My issue at the moment is everything is way too big on the laptop screen. I want to have 1920x1080 resolution but its way too big. I googled what is my resolution on it and it shows 1536 x 864. Can someone tell me how to change this to 1920x1080? I googled what is my resolution on the external monitor and it does show 1920x1200 which is correct.


My external monitor which is my main monitor is fine at the moment with the 1920x1200. Its windows 10 but im assuming this should be very similar to windows 7 to fix this issue?

More replies
Answer Match 51.24%

Monitor is plugged in vga. Toshiba tv us plugged in hdmi. When I turn my computer on it thinks the tv is the vga monitor. If I unplug the tv and have just the monitor it recognises it but if I then plug in my TV. It then switches to that screen and won't return to the monitor even if I unplug my tv. It won't play sound through my tv or recognise it as one. I can't use windows and P as it does nothing. I want the monitor to be primary and tv as secondary with sound. Help me please

A:How do I add hdmi tv as secondary monitor and vga monitor as primary m

sweksybaby welcome to the Seven Forums.

This should be what you are looking for,

Display - Change Main Display

4 more replies