Tech Problem Aggregator

Solved: Compaq cq57 won't pass POST

Q: Solved: Compaq cq57 won't pass POST

So a friend brought me their laptop a Compaq cq57 and you press power button, fan kicks on, then caps lock starting flashing and the WiFi light stays orange and the fan stops, all while maintaining a pitch black screen. I removed battery held power waited 30 seconds and then put battery back in and still same issue. So what's the deal? Most anytime I have had blinking caps lock its either meet bad CPU or motherboard.......any ideas group?

A: Solved: Compaq cq57 won't pass POST

14 more replies
Answer Match 75.6%

Hi same issue, need pass also. ThanksSystem disabled Code = 85492810 

More replies
Answer Match 69.3%

my code is 56712553

A:compaq cq57

Hi: Please read the first post at the link below, which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy??????????????????????????????????????????????????...

2 more replies
Answer Match 68.88%

My sister is having major problems with her Compaq Presario CQ57 (running Windows 7). I have been trying to help her with it but, I am about to literally throw it from a very high window. I'm thinking it has a malicious program lerking inside it. I am trying to get it into safe mode and am having a hell of a time. I want to do a scan on it and I believe it is better to be i safe mode.

There is no F8 option so that is out. I tried msconfig and computer says it can't find the file,(by the way it says that to any program I try to install). Since I can't get anything to install and everything I seem to try hits a brick wall I am at a lost on what to do. Every time someone gives me some advice on how to maybe fix this I can't seem to get past the first step!!!HELP!!!! She has only had the computer for a couple of months. This is her first brand new computer and it seems she has made a very bad choice!

The Wireless has already quit working too! Buyer Beware!!! Please can someone please help me out?? I am desperate.

A:Compaq Presario CQ57

How about booting to recovery partition if available to restore to factory condition or system restore?

2 more replies
Answer Match 68.88%

My laptop wants an administrator password that I don't know. Shows a system disabled code of 91550023. What do I do?

More replies
Answer Match 68.46%

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

1 more replies
Answer Match 68.04%

My Compaq Presario is very very slow:
It takes for exemple more than 5 minutes to start the laptop.
clicking on an URL it takes 2 minutes to start the website.
I hope there is someone who can help me.
This are the specs of the laptop.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD E-300 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0
Processor Count: 2
RAM: 3690 Mb
Graphics Card: AMD Radeon HD 6310 Graphics, 384 Mb
Hard Drives: C: Total - 280109 MB, Free - 184005 MB; D: Total - 20870 MB, Free - 2232 MB; E: Total - 4055 MB, Free - 1106 MB;
Motherboard: Hewlett-Packard, 3577
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Very slow compaq presario cq57

Hi, Download SINO by Artellos.
Save SINO to your desktop and run SINO.exe. (If you downloaded the ZIP version you will need to extract it first)
Then please check the following checkboxes:

Code:

Startup Items
Tasklist
Once checked, hit the Run Scan! button and wait for the program to finish the scan.

A notepad window will pop up. Please copy all of the content into your next reply.
Note: If you try to interact with the program once it’s started scanning it might appear to hang. The scan however will continue.
======
Download Security Check by screen317 from.
http://screen317.spywareinfoforum.org/
Or
http://www.bleepingcomputer.com/download/securitycheck/dl/123/

Save it to your Desktop.
Double click the install icon.
If using Vista - Win 7 - right click the install icon and select "Run as Administrator"
A command Prompt window will open.
Let it scan the Pc - press any key when asked.
It should now open in Notepad.
Copy and Paste the result of the scan in the reply box below.
 

2 more replies
Answer Match 68.04%

Hi, my laptop key fell off the keyboard, and I cannot figure out how to pop it back in. Everything looks to be in working condition, and even the white plastic components have remained on the keyboard. Unfortunately, every single time I press down on the black key, it never actually clicks on.  I've come to the conclusion that there must be some unique process to re-adjusting a key on this notebook. I've searched around on keyboard websites, but their guides do not seem to directly address my situation. They usually end with just pressing down on the key, which does not work for my specific notebook, it'd seem. I'd appreciate any advice.

A:Compaq Presario CQ57 Laptop Key

Hello dear, once the the key is popped out the complete keyboard needs replacement.  So contact HP and tel them to replace the keyboard for you #hpexpertday




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

9 more replies
Answer Match 68.04%

I have a CQ57 that I finally got to work. The Internet works for a minute and shuts down (Windows 7 Home Premium OS) and the laptop shuts down after 10-15 minutes of working. I am trying Best Buy tomorrow. What should I do?

A:Compaq Presario CQ57 Issue

 I am trying Best Buy tomorrow. What should I do?
 
I would suggest that you see if help form this forum can resolve this problem before allowing this other "shop" to charge you a set fee of about $200.
 
You posted that you finally got it to work, what was wrong with it?
 
What kind of other problems are you having?

7 more replies
Answer Match 68.04%

When my computer is booting up it goes to a black screen then switches to a blue blank screen with the cursor. Then it will not let me do anything.

More replies
Answer Match 68.04%

I've had my compaq cq57 for about 2 years and in the last week it has started freezing up so the only thing you can do with it is to shut it down. This usually happens after i've started it and logged in and opened a web browser or tried to do anything on it. I would really like some help with this as i need it for work.

More replies
Answer Match 68.04%

I have tried doing a hard reset on my Compaq Presario CQ57 but to no avail. Power button will not turn laptop on but the F5 button powers it up for 2 seconds before it dies. What can I do to solve this problem? Thank you
 

A:Compaq Presario CQ57 won't power up

I have fixed it myself. I pressed F12 and held it down whilst pressing F5 and the laptop has powered up - YAY!
 

1 more replies
Answer Match 68.04%

how do I unlock my laptop. I forgot my password and I don't have a password recovery disk

A:how to unlock Compaq Presario cq57

I am assuming that you are asking for Windows Password.There are several ways to reset the password. Refer the following weblink for steps:http://www.howtogeek.com/96630/how-to-reset-your-forgotten-windows-password-the-easy-way/ If this does not help, there are multiple other ways in the following weblink:http://www.sevenforums.com/tutorials/238737-user-account-reset-password-windows-7-a.html

3 more replies
Answer Match 68.04%

Ive got a presario CQ57 laptop with windows 7. When i start it up it goes to a black screen asking to launch startup repair (recommended) or to start windows normally. When i do the repair option it just goes to a blank blue screen that looks like my background screen. It now says its checking for problems and that my computer will automatically fix any problem and its got a training status bar and has been doing this for 4 hours now. It gives me the option to cancel it but im afraid to cancel it because im hoping its fixing my laptop. PLEASE HELP ME!! Ive tried to start it normally and it goes back to this error screen. Ive done the F8 thing at the start and ive tried everything. I really need help! im stuck. I cant do anything...
 

A:Compaq presario cq57 stuck

6 more replies
Answer Match 67.2%

Bios password not working- system disabled code 70724054help













Solved!

View Solution.

A:Compaq Presario CQ57-339WM Notebook PC

it worked Thank you! so can you help me with my display? its on the brightest setting but can still barely see screen

5 more replies
Answer Match 67.2%

I was recently given a Compaq Presario CQ57 (300 Series)  by a friend running Windows 10 64 Bit.   Processor - AMD E-300 APU with Radeon HD Graphics 1.30 GHz It was running very slow so I upgraded the Hard Drive to an SSD and increased the RAM to 8GB. I then did a clean install of WIN 10 64 bit. While this has improved the speed a little bit it is nowhere near as fast as I would have expected.  The only software I am running at the moment is McAfee Anti-Virus and Firewall. Does anyone have any suggestions that could still be making it very sluggish. I gather that it is not possible to upgrade the processor. Thank you

More replies
Answer Match 67.2%

I recieved a new Compaq Presario CQ57 notebook from my father-in-law who never used it. Unfortunately it had a bad hard drive right out of the box. Years had passed so no warranty. I replaced the HD with another of the same. The computer came with the disks so I thought this would be simple but alas as many things in my life things didn't go as planned. The disks supplied are the 2 disk version. The computer came with Windows 7 Home Premium installed. When starting the disks by rebooting the computer the top of the black screen says "starting Windows 98" and further down the same page it says "Error: unable to detect... ADAPI IDE CD-ROM device driver not loaded". Seems to load anyway and start up well with disk one but when it gets to the point that it asks if I have the 1 or 2 disk version I hit 2 and immediately it asks me to insert disk 2. Before doing so an error flashes up in the bottom left corner that says "no files found. Invalid drive specification". I obey and insert disk 2 but nothing happens except for flashing the same message. In a nutshell - no restore.

I've searched the net for days trying to find and answer and came up with ideas but nothing specific. I have run all the Bios tests and all come out working well. Boot order is cd/dvd room first. I downloaded a copy of Windows 7 onto an external drive but I can't get the CQ57 to read it even after changing the boot order. Also downloaded the drivers for the CD-rom but can't lo... Read more

A:Cannot restore Compaq Presario CQ57 with disks

There's surely something wrong with the message of "starting Windows 98" and having Win7 discs for it. Windows 98 is quite old and there's 2 versions, 98 and 98SE [Second Edition]. As I recall there was also an update for 98 similar to a Service Pack. There should be a multi-color sticker on the case, maybe on the bottom, that gives the version of Windows and the required Product Key, useful for determining what its origin was.

5 more replies
Answer Match 67.2%

I have just gotten a brand new Windows 7 computer, which worked perfectly the first day. I turn it on a few days later and it won't detect <i>any</i> networks, not even my home network. Any ideas
 

A:Compaq Presario CQ57 will not connect to wifi

9 more replies
Answer Match 67.2%

compaq cq57 wants admin password - system disabled code is 85822775. can anyone help? 

A:Compaq CQ57 admin password needed

@spidarpig? Please enter:     30780371 Regards.

1 more replies
Answer Match 67.2%

My girlfriend has a Compaq CQ57. It came with Windows 7 Home Premium. She has the re-install disk set for it also. The problem is: The computer BSoD'd about 4 times in one night but I was never able to get the code that I could look up. I decided to re-install the OS using the disk set but now it runs slower than it ever did, and it was never a fast computer. I checked Performance Monitor and found that the Memory reading was fluctuating contstantly up to almost 100% and back down. I'm thinking that the Memory may need replacing. The other graphs seem to be about normal. Any ideas? Thanks. Jeff W

A:Compaq CQ57 runs much slower than normal

Welcome back Jeff. When booting start tapping ESC and run the HDD diagnostics. Let us know if it finds any problems??? REO

1 more replies
Answer Match 67.2%

I have a Compaq Presario CQ57 Locked out of BIOS with message System Disabled [ 51320211 ] 











Solved!
View Solution.

A:Compaq Presario CQ57 System Disabled

Hi, Enter  44088837 Regards, DP-K

4 more replies
Answer Match 67.2%

Hello,Like the title says i need drivers for my Compaq Laptop.
Drivers need to be Realtek!

A:Windows 8 drivers for Compaq presario CQ57 301-SA

Realtek drivers are here:

Software & Driver Downloads Compaq Presario CQ57-301SA Notebook PC | HP? Support

1 more replies
Answer Match 67.2%

Hello. I just recently bought a compaq presario cq57 laptop from a friend. And I was told right after I paid for it that my friend couldn't remember the password so therefore couldn't get into it. Thus I too can't get into it and am totally locked out.It barely starts to boot up after turningit on when it almost immediately goes to the screen saying/asking for a password. And every time after 3 failed attempts it says disabled and gives me a special number code to go with it. The disabled code that it gives me every time is  -  disabled  69374099. Is there anyone out there that can give me the real/right password to put in especially one that matches up with the disabled number code error that it keeps giving me. Thank you all very very much. I really do appreciate it a lot. Sincerely, Thumper7771976

More replies
Answer Match 67.2%

The normal battery that came with the laptop is 10.8v 4090mah. However, the battery is now weak and I'm looking to replace it. But the replacement battery I found has a bigger capacity ? 6600mah 11.1v. I want to know if its safe for my laptop, because many people from Google search results said its okay if its 11.1v, and some online store sellers also said it's okay to use 11.1v replacement for a 10.8v battery.Please let me hear your opinions.

More replies
Answer Match 67.2%

Hello,I Installed Win7 (Fresh) I Dinint Think About Drivers So I Need Internet Driver
ITMarkus

A:Compaq Presario CQ57 Internet Driver

Hi ITMarkus and welcome to seven forums.

I will need you system specs to help you out on this

1 more replies
Answer Match 67.2%

I recently acquired a lenovo laptop B570 CHEAP. had cracked screen and I knew so when I bought it, figured it might be worth fixing seeing as lenovo is GOOD stuff, right? Anyways I turned it on after ordering replacement charger from Ebay and it just sits on the POST screen. Any idea what could be wrong?? I tap the F2 to enter setup and it will say please wait for like 5 minutes-10 minutes. I pulled the HDD and it still wont pass post. It appears to have been dropped somewhat onto its side, hence the cracked screen. Is it a orst case/fried motherboard scenario??
 

A:Solved: Lenovo B570 wont pass POST

13 more replies
Answer Match 66.36%

Hello So I Need Internet Driver For My Laptop And I Wll Give Specs To

PC Specs:
Operating System
Microsoft Windows 7 Home Premium 32-bit SP1
CPU
AMD E-300
Zacate 40nm Technology
RAM
2,00GB DDR3 @ 532MHz (7-7-7-20)
Motherboard
Hewlett-Packard 3577 (Socket FT1) 45 ?C
Graphics
Generic PnP Monitor ([email protected])
384MB AMD Radeon HD 6310 Graphics (HP)
Hard Drives
298GB Hitachi HTS543232A7A384 SATA Disk Device (SATA) 28 ?C
Optical Drives
hp DVDRAM GT31N SATA CdRom Device
Audio
High Definition Audio Device

A:Compaq Preario CQ57 Internet Driver Software

Welcome to the Seven Forums

Try going to HP Support & Drivers | United States or http://h20000.www2.hp.com/bizsupport...riesId=5091489
Choose your laptop, then you will need to choose Windows 7 32 bit then look for

Driver - Network

WiFi or Wireless
and/or
Local Area Network (LAN) Driver
You'll need to use the correct manufacture I see there are two or three different ones on that page.

Jerry

3 more replies
Answer Match 66.36%

Says system disabled after 3 attempts at administrator password. Code is 63494577 please help!

More replies
Answer Match 66.36%

Hello,I have a Compaq Presario CQ57 and the fan is running all the time at full speed.I opened the laptop and did a fan and motherboard cleaning,I applied thermal paste,I changed in the bios the option #Fan always on# from Enable to Disable,I updated the Bios but still nothing...it sounds like a jet fighter.should I change my fan?anyone who has an advice?

More replies
Answer Match 66.36%

Hello. I just recently bought a compaq presario cq57 laptop from a friend. And I was told right after I paid for it that my friend couldn't remember the password so therefore couldn't get into it. Thus I too can't get into it and am totally locked out.It barely starts to boot up after turningit on when it almost immediately goes to the screen saying/asking for a password. And every time after 3 failed attempts it says disabled and gives me a special number code to go with it. The disabled code that it gives me every time is  -  disabled  69374099. Is there anyone out there that can give me the real/right password to put in especially one that matches up with the disabled number code error that it keeps giving me. Thank you all very very much. I really do appreciate it a lot. Sincerely, Thumper7771976

A:compaq presario cq57 disabled code 69374099

@Thumper7771976 Enter   76052019

1 more replies
Answer Match 66.36%

Hello,I have a Compaq Presario CQ57 and the fan is running all the time at full speed.I opened the laptop and did a fan and motherboard cleaning,I applied thermal paste,I changed in the bios the option #Fan always on# from Enable to Disable,I updated the Bios but still nothing...it sounds like a jet fighter.should I change my fan?anyone who has an advice?

More replies
Answer Match 66.36%

   Hi, this seem to be a question doomed to be without solution, but is there a way to configure the fan settings on my Presario Windows 7 x64 Laptop? It becomes warm pretty easily and while it performs well, I've heard that it extends life-expectancy greatly with high cooler temperatures. So far I haven't found anything able to change them for this specific computer, while on my Macbook ( schoolcomputer, don't blame me!) I just needed to install a third party, change RPM and target temp and then it was done, not even a reboot needed. Im using a cooler allready. Has anyone managed to do this? Im pretty experienced with managing my PC and the system, but I'd prefer to not meddle with registry and such. Thanks in beforehand!       /illirey

A:Fan settings on a Compaq Presario CQ57 Windows Laptop

Hi,CPU fan speed (RPMs) are managed by BIOS based on the CPU temprature. tweaking registry may not help manage the RPM. maximum you can achieve is, manage to cook the CPU which will heatup the processor more, which will make the heatsink FAN rotate at higher RPMs. which is anyways not going to solve issues. infact it can increase the troubles. however if you see any issues caused due to heating of notebook, you may wish to follow steps below and try to reduce the heat on the PC by cleaning heatsink etc...http://support.hp.com/us-en/document/c01657439  Good Luck !!!!

2 more replies
Answer Match 66.36%

Hi, cant enter bios setup, got error code: 56085878. Help please. Thanks

A:compaq presario CQ57 needs BIos administrator password

Enter the followng unlock code; 49983278

2 more replies
Answer Match 66.36%

Hello Tech Support Guy forums! I'm wondering if you can help me with a problem.

My girlfriend has a Compaq Presario CQ56 laptop, but the screen broke and she replaced it with a CQ57, which I guess is the next most advanced model in the line. However, the skype connection would drop after just a few minutes and then drop repeatedly afterward every couple seconds. Usually, all connected services (like AIM) would drop off too.

So here's the weird thing - she returned it and got a replacement, and the replacement is doing the same thing. The CQ56, on the same network, can keep a skype call going for hours. But the 57 drops off fast, and we've tried two different units. I thought that maybe it could be a defective laptop the first time, but twice?

Anyway, does anyone have some troubleshooting suggestions?
 

A:Connectivity problems, particularly with Skype, on a Compaq Presario CQ57

would you post the following when its working and then repeat all the tests when it disconnects

is this connected by wifi if so also add the xirrus tests

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Ping Tests
If you cannot access the internet with t... Read more

1 more replies
Answer Match 66.36%

My son is 11and he put an administrative password on the Compaq presario cq57 laptop I bought for him.. He can't remember the password for it now..Go figure Lol. Help me please











Solved!
View Solution.

A:My son put password and forget it Compaq presario CQ57 Disab...

Bama Enter   30880517

4 more replies
Answer Match 66.36%

Hi, I'm trying to find a replacement audio socket for a Compaq Presario CQ57.

All it says on the component is 120204

Its soldered on to the motherboard.

Anyone know any where I could find one.

Pics of both sides:

Thanks.
 

More replies
Answer Match 66.36%

I got compaq Presario CQ57 with product number: LR785PA#ABG bought in Australia. Small quantity of water spilled on my key board, i immediatly shut my computer and wiped it with towel and tried to dry with hair drier. All my efforts gone waste, currently few key on my laptop are not working. Is this laptop got a replacable key board... if yes pls provide part number to source one. Along with key board part number would you be able to provide "how to replace key board" video. Thanks in advance.

A:Compaq presario CQ57 key board few keys not working due to w...

Dear Customer, Sorry to know to that there was a liquid spill. Before you replace the keyboard, please connect an external USB keyboard and check if all the keys working.If YES, Then only replace the Keyboard. Because there could be a possiblity of liquid damaging the Circuit Board and replacing keyboatrd will not help us. Below is the Maintenance and Service Guide for your PC, Kindly go through.http://h10032.www1.hp.com/ctg/Manual/c02786367 NOTE:Page 46 for Removal and replacement procedures.Page25  Illustrated parts catalog-  Part number for replacement Keyboard. NOTE:To watch remove/replace Videos use http://thesml.hp.com/Select FRU Remove replace, towards your left     Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 4 

1 more replies
Answer Match 66.36%

how to run the system bios in laptop Compaq Presario CQ57 with Windows 10?

A:how to run the system bios in laptop Compaq Presario CQ57 wi...

ANAKONDA wrote:how to run the system bios in laptop Compaq Presario CQ57 with Windows 10?Hi, Sorry, what are you trying to do ? We don't run the system BIOS. And from your question, all I can say: Please don't touch to BIOS, this is the shortest way to brick your machine. Regards.

1 more replies
Answer Match 66.36%

The system disabled code is 66055283

A:Need administrator password for presario CQ57 Compaq laptop

@Noseph01? Enter   79933805 Regards, DP-K

1 more replies
Answer Match 66.36%

Hi,I need my bios administrator password for a compaq presario cq57.I get system disabled error 61596522.Thanks.

A:compaq presario CQ57 needs BIos administrator password

Hello @kodoku Welcome to the HP Support forum. Please, try to enter this >> 74494504as a response code. This should let you enter BIOS, start your PC, unlock your BIOS and/or reset security settings. Let me know if this works for you

1 more replies
Answer Match 66.36%

Hello, I want to upgrade from the E-300 dual core 1.30ghz processor currently installed in my Compaq Presario CQ57-426SA. Can you please provide a list of compatible AMD Processors I can install into this notebook PC? Thank you.











Solved!
View Solution.

A:Compaq Presario CQ57-426SA processor AMD E-300 upgrade

Hi, It is an AMD processor: Model number    E-300CPU part number    EME300GBB22GV is an OEM/tray microprocessorSocket    BGA413BGA processors, like this one, are soldered on a motherboard, as a result, upgrading or replacing them means buying a new motherboard which means buying a new computer. Regards.

2 more replies
Answer Match 66.36%

Compaq Presario CQ57 needs admin password to bootup. Says system disabled with code 74006138.

A:Compaq Presario CQ57 needs admin password to bootup.

@Klanimal? Please enter         61964118 Regards.

1 more replies
Answer Match 66.36%

I can't seem to locate the internal battery on my Compaq Presario can57. Can anyone please help

A:location of CMOS battery on my compaq presario cq57?

@mmtreece? When asked for the password just hit enter 3 times. Post the halt code. Sorry did not need to remove the CMOS battery. REO

2 more replies
Answer Match 66.36%

Some of my keyboard keys stop working suddenly (i.e. a,s,d) and after sometime many keys stop working. So can anyone help me in this thing.

A:Compaq cq57 laptop keyboard keys not working

 Hey @Sanjiv1?, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your Compaq Presario CQ57-200tu Notebook and keyboard keys not working correctly. You can resolve this issue by checking the keyboard language.  Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues. Here is a link to uninstall the keyboard. Restart the computer after uninstalling, it should reinstall automatically. This has helped others. Here is a link to keyboard troubleshooting. I hope something here helps. Thanks. 

2 more replies
Answer Match 65.94%

My Presario cq57 has a disabled system code  72114208 does anyone know the password to bypass system disabled

A:Re: Compaq Presario cq57 system disabled code 50555 523

Hi: Enter this unlock passcode... 63872828

1 more replies
Answer Match 65.94%

My son is 11and he put an administrative password on the Compaq presario cq57 laptop I bought for him.. He can't remember the password for it now..Go figure Lol. Help me please

A:Compaq presario CQ57 Disabled code is 85128591 help me pleas...

Bama. Check your other post. REO

1 more replies
Answer Match 65.94%

compaq presario CQ57 cannot start tells me to press control, alter and delete but it doesnt respond

More replies
Answer Match 65.94%

When I try to connect to my wireless networks, My Compaq Presario CQ57 keeps saying "windows was unable to connect to (name of my internet)". When I run the troubleshoot to look for the problem it say problem detected windows can't connect to the hidden network. I've
-updated all my drivers
-installed Ralink RT 5390 802.11b wifi adapter
-right clicked on properties and made wifi findable
so on and so on. My Led is white showing that I have wifi enabled. I've turned off my router, unplugged it, reset it, so on and so on but the same thing occurs. I have a couple other laptops and tablets in the house and they connect to my wifi with no problem. It's showing that I have full reception but just won't connect. I even tried connecting to my portable hotspot and it does and says the same thing. I can connect my Ethernet cable in the socket of the computer and it works just fine, but I need it to connect to my wireless wifi as this is going to be my work laptop and used on the road.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Celeron(R) CPU B800 @ 1.50GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 2
RAM: 3947 Mb
Graphics Card: Intel(R) HD Graphics, 1845 Mb
Hard Drives: C: Total - 286174 MB, Free - 236037 MB; D: Total - 14805 MB, Free - 14715 MB; E: Total - 4055 MB, Free - 4055 MB;
Motherboard: Hewlett-Packard, 3672
Antivirus: Microsoft ... Read more

A:Compaq Presario CQ57- Windows can't connect to the hidden network

13 more replies
Answer Match 65.1%

I have a Compaq Presario CQ57-339WM and it won't boot.I tried to restore it, but I can't get into the bios to let it boot from CD.It says system disabled 67912930 after 3 failed attempts. Help!











Solved!
View Solution.

A:Compaq Presario CQ57-339WM bios password system disabled

Try >> 78670316

7 more replies
Answer Match 62.58%

I have a Compaq Presario SR1600AN desktop that has 256MB memory, so I decided to upgrade it with two 512MB sticks - the manufacturer says up to 4GB can be fitted.

Despite working fine before the RAM was fitted, the machine will now not boot at all - no beep on switch on, no keyboard lights, no Compaq splash screen, just a small initial noise from the hard disk.I did take the usual antistatic precautions when fitting the new RAM.

I removed the new RAM, but that made no difference, also tried it with just one stick at a time of old and new but still the same. Have tried a known good PSU and checked all connectors and seating of cards, etc., but it still won't start - any ideas on what to do next?
Thanks
 

A:Solved: Compaq not getting through POST

Solved - cleaning and reseating the DIMMs several times made it work.
 

1 more replies
Answer Match 61.74%

My compaq r3000 will not post. The power led lights up and the fan comes on. Also the on button for the touch pad lights. Just got it back from a power jack repair and laptop started and ran fine before the repair. Now it fails at the post test. After about 5 seconds the fan stops then a few seconds later the fan spins up again. The display remains dark and no beeps. If I load a cd, the hd light comes on and the cd drive spins up and the light flashes. I appreciate any ideas.
 

A:Solved: Compaq notebook won't post

6 more replies
Answer Match 58.38%

tryin to troubleshoot a pc over the phone. comp doesn't pass post..freezes on the screen that says info about the pc..bios info, amd cpu etc, and says 'escd info updated' or something like that. and it doesn't do anything. even if try to go into bios, it says 'entering bios...' and it freezes there. trying to find a starting point to troubleshoot. i think it may not be the OS cuz it's not all loaded yet. but i could be wrong. no recovery cds, no xp cd.

hp athlon 1.3ghz, 512mb ram, XP home
 

A:Pc doesnt pass POST

8 more replies
Answer Match 58.38%

Hey.. I have been having a couple problems with my computer. Just built by myself about 6 months ago. For the past week or so, I have been running out of resources very quickly, but have one gig of ram.. doesnt make sense..

So I go to reboot it about 15 mins ago and it wont pass the post screen, and wont let me into the bios to see if anythings wrong. So far I have reset the RAM and removed cmos battery for 5 mins. Nothing seems to be working. I was thinking maybe I had a virus because my sound driver mysteriously disappeared (That was why I was rebooting).

Any suggestions?

My setup is:
abit ic7-max3
2x512mb khz pc-4000
p4c 2.8ghz
6 case fans
aiw r9800pro 256-bit
120gb wd 7.2k

Also.. a little red light comes on when I start up the machine. That same light is green before I initiate start-up..

I'm boggled.. please help me!

Dave
 

A:WTF Doesnt pass post? out of nowhere?

What kind of powersupply do you have running this thing?

Is the power connected to the Radeon graphics card inside of the system? If you can, put it on its own line.

How far into start up process does it go? Can you see the BIOS screen on the monitor? Try reseating your graphics card if you can't.

Check your motherboard's manual to see if you can reset CMOS via jumper.
 

2 more replies
Answer Match 58.38%

I just acquirred a Compaq/Hp laptop model nc8230, This was bought on Ebay in the USA and posted to me in the UK. This was bought with other laptops and all was fine except this one has a bios password. I think it is one of the newer type bios security because unplugging the bios battery for hours on end doesn't get rid of the power-on bios password.

As soon as you switch it on, you get a blue box with the legend
"Embedded Password Security" with the picture of a key. You get 3 tries to get it right before you have to power down, the power-on again to have another go. There has to be a backdoor password here, but I can't guess it. I am desperated to get this machine running .

Can anybody out there help?
 

A:Bios Power-on Pass Word On Compaq / Hp Nc8230

COMPAQ nc8230 PSW HELP!

Hello; Sorry to bother you but i read your post in regards to the laptop you had/have with the locked bios, i was wondering if you had found the backdoor pswd for it... i am stuck with the same problem you have/had and need some help.

If you would be so kind as to tell me where you found the pswd or even provided me with it, that would be awesome. Bought the laptop on ebay from a liquidator and they have no clue as to what the pswd is.

Thanks,
-Sal
 

2 more replies
Answer Match 57.96%

Hello, I've recently upgraded my MotherBoard and Ram for my pc set up. I can put everything into my mobo fine with it working other than my Mushkin ECO2 (11-11-11-28 (2x8G)) DDR3L ram. I have tried using one at a time and tried changing my Bios so the frequencies and voltage is right. I currently changed it to 11-11-11-28 1.5 V and 1600 MHZ all other settings are on auto. My Mobo is a Gigabyte Z97-HD3 and I know all the ram slots work because I used my other ram and it works fine in all slots.
Thanks in advance
 

A:Upgraded Ram won't pass Post test

Did you check the approved list for ram on the support page for your mb? I just looked and no muskin ram is even listed. When you use parts that have not been tested and found to work, you are in effect a beta tester; might work and it might not work. Generally if you stay with major name brand ram ie corsair, crucial, or kingston, you do not have problems.

On the support page, there is a beta bios that addresses memory compatibility. I generally never recommend using a beta bios however it would appear this is an option IF you want to use that ram.
If it were me, I would return the ram and go with a name brand ie corsair, crucial, or kingston. Up to you. If you do decide to flash the bios, be SURE you read and FULLY understand the flashing procedure. While a bios update is not difficult, an incorrect flash can render your board unbootable ie junk. Many gigabyte boards [this one included] have the dual bios. This makes updating a bios almost idiot proof however do be sure you understand how to update the bios.
Here is a link to the support page for your mb;
http://www.gigabyte.com/products/product-page.aspx?pid=4955#ov

Note there are 3 different versions of that mb so be sure you are on the correct page. That link is for ver #1. There is a link at the upper left for ver 2, 2.1; again be sure you download the correct bios file if you decide to update the bios.
I currently changed it to 11-11-11-28 1.5 VClick to expand...

Most of the eco ram I have seen is 1.35V. Are you s... Read more

2 more replies
Answer Match 57.96%

Any help appreciated

I have made no changes to the PC but it will not get to windows load up.

POST tone sounds like 1 long then silence though possibly 2 short to follow which would suggest a graphics card problem.

I have changed the graphics card for a working one in another pc and it also does not work in this pc.
I have tried my card in the other pc and it works fine
I have used another pci-e slot with the same results
I have tested the monitor with another pc and it is fine
I have removed all peripherals
I have removed RAM stick by stick and also in pairs
I have checked all internal wiring

I am a bit stuck now and suspect a motherboard problem

Help appreciated
 

A:PC won't pass POST - one long beep

What BIOS does your motherboard use?
 

1 more replies
Answer Match 57.54%

I have a Compaq Presario SR5552F Desktop PC with windows vista. My computer was running perfectly fine until it turned off somehow yesterday. Now when i turn on the computer it only goes to the screen that shows its name compaq. It wont go into boot set up or any of the other "F"(function keys) key modes. Ive tried to remove the CMOS battery and tried to reboot, but still nothing. If anyone can help me that would be great. All fans are working, and the keyboard restarts with the ctrl-alt-delete method. Im beyond on confused, please help me if you know what is going on .

More replies
Answer Match 57.54%

Hi, a student of mine owns a compaq mini 110, CNU9312BR1, p/n NZ800EA#B1A and apparently is locked. But when I turn it on shows only <enter current password it doesn't give a lockout code so I can calculate withthe tool given in this forum the el****** reseting password. Anyway I tried writing the product name of the pc and the program gave me as a code : e9lof37pb3. When I try to enter this to the pc I notice that some keys are responding on the screen (showing a * when pressed and some not) is the keyboard broken also? or the mb perhaps? or is something else?

A:Compaq mini 110 bios lockout no code is given for reset pass...

Connect a USB keyboard to the mini notebook.  You can use it just as you can use the notebook's own keyboard. Press the power button and then when asked for the password, enter e9lof37pb3 and then press the enter key. e9lof37pb3 is the only system enable code for an HP mini.

1 more replies
Answer Match 57.12%

I have an ASUS N61JV series laptop. Everything was totally fine until I decided to re-partition the internal hard drive so the main partition had more data, and added a few smaller partitions for a future OS I'm wanting to install.

Basically what happens now (since after rebooting, letting EASEUS Partition Master do its work, etc) is the laptop gets to the POST screen (where it says ASUS- I don't have the messages enabled, though probably should..) and hangs. Within 15-30 seconds the laptop gets very hot and I switch it off myself and let it cool down before trying again.

Seems to only happen with this hard drive. I've plugged it into a different computer via usb and everything is intact as it should be, and windows chkdsk shows no errors.

Plugging a spare hard drive of the same type inside the laptop allows me to get past the POST screen and everything operates normally.

Perhaps I need to buy a new hard drive.... Thanks for all your help everyone!
 

A:ASUS laptop won't pass POST screen

Its possible Easeus has corrupted the boot sector on the hard drive.

If it works in another computer then copy off any data you have on the drive before doing much more, as you may lose it all.

If the data and the O/S is not important then delete the partitions on the drive via USB or use a drive zero utility such as the Western Digital Diagnostics.

If you want to fix it try booting from a Windows disc and try FixMBR or Fixboot, or use TestDisk when its connected via USB to attempt to fix it.
 

1 more replies
Answer Match 56.7%

Hello everyone,

I was wondering if you can help me with an Issue I'm having.

Have a PC with an EPOX EP-8RDA6+PRO NF2 board with 2 Nvida Sata / 4 Silicon Image Raid Sata ports.

Has an AMD Athlon XP 3000+, 1.5GB of Memory, and AGP ATI All-In-Wonder 9600xt.

I am trying to convert it to a Server for our home network by installing 2 Seagate 1TB hard drives.

Primary drive is a 160GB Seagate IDE drive and also there is a IDE DVD+RW drive installed.
Whenever I try to start the machine from being powered down, it goes through post, identifies the IDE drives, then sits there and then Identifies the SATA drives (which I have on the 2 NVIDIA SATA ports).

After that, it just hangs and does nothing.

Now if I push the restart button on the case, it will go through just like it should and start up.

It seems like it's almost taking too long for the SATA drives to spin up and it's causing it to hang up the POST.

Anyone have any ideas or solutions to this?

I did only have a 300 watt power supply in there and thought maybe it was too weak for all those drives and devices so I swapped in a 420 watt and it is still doing the same thing.

While it's intended as a server, I don't want it on 24X7, so I have it set so it will Wake on LAN, but it won't work when I can't get past POST. So right now I'm stuck.

Anyone seen an issue like this before?
 

A:SATA drives won't pass POST on NForce2 board

Since the MB is a few years old, it probably has a SATA v1 controller and it's not recognizing the new SATA v2 HDDs you've installed.

Check with Seagate to find out if there's a way to resolve it. Some HDDs have a jumper to set it to the older SATA v1 throughput. Others require a software application to configure it to work with older SATA v1 controllers.
 

3 more replies
Answer Match 51.66%

Compaq presario 5000 windows xp home,
Problem started a few days ago. It powers up but wouldnt even post. Whats odd is when i laid it on its side and took the side panel off it booted up and seemed to be fine. I left it like this, shut it down last night and this morning it booted fine. Now after fully powering off it wont post.

I tried several on/off cycles and no change. PS voltages are good. I tried booting with no ram and no change. Tried reseating all cards and connecters and no change with ram in or out. Also tried a different ram stick. no go.

any ideas?
 

A:Compaq PC won't boot won't post

9 more replies
Answer Match 51.66%

What's the maximum external resolution for a Compaq CQ57-229WM? I can't find it anywhere.
Thanks in advance,
Scott
 

More replies
Answer Match 51.24%

Please need help compaq will not boot up. I got it and the fan turns on and the lights for the power button come on but the hard drive light does not show and the monitor displays nothing. I changed out the motherboard to a df mother board which i checked and was a replacement and then changed out the processor and still nothing it will not work. What else can i do?
 

A:Compaq Presario 2535qv No Post

Sounds as though you've done the basic things as listed here: Tutorial: No POST (Power On Self Test)

Only thing left is to start replacing parts. Start with Power Supply (even though it powers up) Then possibly Ram, then Motherboard
 

1 more replies
Answer Match 51.24%

I have a HP Compaq Elite 8300 SFF that will power on and the power light is lit, but won't POST. It was working just fine until I rebooted it. The fans also begin to ramp up to full speed within a few minutes. Intel vPro was also working fully until I cleared the CMOS by pulling the battery. Any thoughts?

More replies
Answer Match 51.24%

Morning all

I have a HP/Compaq D220 MT computer that is giving an 8 beep code over and over at startup. I have no video no nothing on screen. When i remove the memory it gives the correct memory beep error (3) i have removed all periferals and removed power and data cables from all devices except the MB. HP is SLOOOOOOW at trying to get Tech Support and their "live help" is kinda useless if your not using the computer that has the problem ( if i can use the computer that has the problem then why do i need LIVE HELP LOL) Any Help would be greatly appreciated.

Marc
Zones Inc.
Returns Tech
 

A:HP/Compaq Post Beep Code

I believe it is a video card problem. Try reseating the video card or try a new one.
 

2 more replies
Answer Match 50.4%

Hi
Got me a Compaq !200 laptop and after the post completes the fan stops working and the laptop just gets hotter and hotter.
I recently put in a Intel celron running at 850 MHz the original was a Intel celron also but it ran at 633 mhz
Any help is appreciated Need any info just ask i was'nt sure what to provide
 

A:Compaq 1200 laptop fan stops after POST

You could have damaged the motherboard when you changed the CPU. Have you repaired laptops before? Have you tried resetting the bios?
 

3 more replies
Answer Match 50.4%

AC Adaptor has been replaced
DC Jack has been replaced

http://www.youtube.com/watch?v=DCHMUOoC2Ko&feature=youtu.be

Things I have tried.

1. Taking out battery and power lead and holding pwr button for 1min
2. Reseating ram
3. Taking CMOS battery out for 10mins
4. Removing Hard Drive

Any suggestions appreciated before I start to strip this laptop down again......

TIA

Zorg.
 

A:Compaq Presario CQ61 Power No Post?

9 more replies
Answer Match 50.4%

Hi all, hopefully someone can help me with this problem...

Ive been given a compaq deskpro pc by a friend of mine whos been having problems for a while. Originally when he asked about sorting it out he appeared (from his description over the phone) to have a virus of some sort - the computer was really slow and most recently was doing a countdown before shutting down.

Its been a while since then because i havnt had time to look at it. When i eventually got it here and switched it on it didnt even boot.
Power on
fans spin up
ide drives spin up and stop
monitor doesnt initialise just stays in standby mode.
No beeps

First thing i did before anything else was take out the HDD and connect it to my own pc and scan it for viruses which found and cleaned over 700 files (various nasties I-Worm/Klez.H, Trojan Downloader.Axload.A, Startpage + others from what i recall).

I then thought i would just run scandisk over it while it was still connected. Basic scan worked ok but trying to do a thorough surface scan it freezes my pc (only way out is power off)

So anyway put the HDD back into the Compaq and tried booting. still nothing.

Then tried clearing the CMOS using the jumper switches which appeared to work as it booted up through the POST and started complaining about time/date settings etc. Got into the Compaq bios setup but it froze before i could finish setting the time.

The strange thing is that over the last 2 days ive been messing with it it has booted a few times with va... Read more

A:Compaq DeskPro - wont boot NO POST

6 more replies
Answer Match 50.4%

Hi,

I have a problem with a Compaq ProLiant 5000, that i could desperately do with some help with.

It worked perfectly until i moved house and after a few months of being in a corner i turned it on for the first time to discover that it would not boot up at all.

It powers up, the fans come on, all the lights on all the (Hot Pluggable) disks light up momentarily, 2 lights on the keyboard light up for the briefest second. The big red Compaq logo appears on the screen and sometimes the memory check starts. But then the screen just goes blank, sometimes the memory check doesn't even start at all and the screen just blacks out after the Compaq logo.

The computer does not die altogether, the fans keep whirring and the green power light remains on, but that is it. I do not get any beeps, but a couple of times the middle green light on one of the disks came on and remained on, but nothing else happened, even if i left the machine for hours. No amount of rebooting or pulling disks in or out or pulling the cover on or off made any difference at all. It just does the same.

Any help would be greatly appreciated, just point me in the right direction.

Thanks in advance

Alan
 

A:Compaq Proliant 5000 will not boot up or POST

Interesting how you say that a light comes on and remains on, usually this suggests that the hardware is not connected properly; have you checked to make sure all of the wires in your case are securely fastened and plugged into the right places?

Also, it would help us solve your problem if you gave us some system specs. How long did you have your computer before moving house? And finally, have you ever left your computer on and experienced a power surge or something similar? This could cause some problems for your PSU and usually the damage would stay there (in normal circumstances). So if you could post the above and other relevant info, it would be greatly appreciated .
 

6 more replies
Answer Match 49.98%

Hi all,
I have a Compaq Presario 6300us that fails to boot. It goes into the POST and gives me one long beep, then after a few seconds repeats. I have looked around for Compaq POST codes but have not found any for the newer MB's. Anyone know of a site with newer POST codes for Compaq's? I tried the Compaq/HP site but it is only the basic information (installing, drivers etc) and not what I am looking for. Any help is apprecated.

-Gameman
 

More replies
Answer Match 49.98%

HI Everyone i need some help with this problem I have a Compaq Presario SR1135CL that im working on. The only problem was that the computer was running slow so i decided that i take the computer apart since i noticed alot of dirt was in the computer itself. When i put it back together i noticed that the Compaq Logo came up and stop and would go no futher so i boot down the computer and power it up again but this time i only noticed the cpu fans running and i don't even get a post beep or display on the screen at all. What do you think is the problem?

I took the memory out - still no beep
I switched the VGA card- still no beep
I reseated the processor chip and heat sink -still no beep
I put a different PSU in the computer - still no beep

The fans just keep running without any post beep,display and bios
What do you think is the problem here? Can anyone help me please
 

A:Compaq Presario SR1135CL no post beeps after cleaning.

Perhaps you have shorted something - I once trashed a board by vacuuming with a metal (I know I know) suck pipe with the thing running - it stopped and never worked again.
Otherwise, take off all the connections including the power and replace them. Also take off all the front panel connections and leave them off.
Disconnect all driver and cards.
Replace the RAM
Reboot by shorting the front panel connection pins - no beep = dead board. Compaq used to use 2 beeps for good POST = 2 beeps is good. Reconnect and replace one piece at a time until you find what stopped it.
Best of luck.
 

4 more replies
Answer Match 49.14%

Hi All,
I tested the following attacks in Microsoft Advanced Threat Analytics and found them
not to be working.

Bruteforce Attack Pass-The-Ticket Pass-The-Hash Sensitive account exposed Using Plain-Text Authentication
I have tested other attacks like Reconnaissance
using DNS, Broken Trust, Honey Token account suspicious activities but they are working perfectly fine. I don't know
what's the issue with the above 4.
For
1. Bruteforce Attack:
I used thc-hydra-windows and triggered a dictionary attack using a list of passwords.

2. Pass-The-Ticket:
I used mimikatz to steal the kerberos ticket from a PC on which Admin is logged on. Impersonating an attacker, I copied the .kirbi file and Injected that file(using mimikatz again) to another PC on which a domain user is logged in.

3. Pass-The-Hash:
(Same as above)
4. Sensitive account exposed in plain text authentication:
I used mimikatz command 'sekurlsa :: logonpasswords' and was able to get passwords of all the users who logged on to that PC. But this was also not detected by MATA.

Please help me with the above issues. If possible, provide the tools using which I can trigger and detect those attacks.
Regards 

More replies
Answer Match 49.14%

I'm getting the famous enter admin pass on boot (no BIOS update, laptop been off for a year (no OS atm) and I just started trying to fix it.  The error code I get is: [ 54549743 ] I hope that helps get my mobo unlocked!











Solved!
View Solution.

A:HP-2000 Enter Admin Pass/Power on Pass at Boot

@PoetheProgrammr? Enter    41421385 Regards, DP-K

2 more replies
Answer Match 49.14%

Ok so i am furious with Micro$oft now! the other day i was FORCED to change my microsoft account after much nagging i did so and i dont like changing logins too much. (this was a week ago)
now for some random reason on earth without my permission my windows login also changed login passwords to the microsoft account. I DONT WANT THAT! that password is too long and complicated for someone who locks his computer every 5 minutes or so. why did this just kick in now? i changed M$ account pass over a week ago and today it decides to change windows login?! can i change JUST my local windows login separate from microsoft login?
if i try to change pass from settings it it goes online and says you cant use password that has been used before.

A:Can i change windows login pass without changing microsoft pass too?

Originally Posted by xdarkmario


Ok so i am furious with Micro$oft now! the other day i was FORCED to change my microsoft account after much nagging i did so and i dont like changing logins too much. (this was a week ago)
now for some random reason on earth without my permission my windows login also changed login passwords to the microsoft account. I DONT WANT THAT! that password is too long and complicated for someone who locks his computer every 5 minutes or so. why did this just kick in now? i changed M$ account pass over a week ago and today it decides to change windows login?! can i change JUST my local windows login separate from microsoft login?
if i try to change pass from settings it it goes online and says you cant use password that has been used before.



Don't go for a password. Use the PIN option That's just what you need and it's really a great thing as well.

4 more replies
Answer Match 48.3%

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista&#8482; Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

14 more replies
Answer Match 47.88%

i have a hp touchsmart 610-1000 i forgot my power on password i need some help to get on my computer

A:i have a touchsmart 610-1000 cant get pass the power on pass...

 Hi, Attach the completed model number, for example 610-1031f How Do I Find My Model Number or Product Number?

2 more replies
Answer Match 46.2%

Hello everyone! Can you help me with a (hopefully) simple problem?
I have a Access 2003 SQL Pass-thru query that I need to prompt the user for Begin Date and End date, then put these values in the query. I read the Help, but I still don't understand HOW!
Questions: (BTW, this query is being generated from the Switchboard)
1. How do I prompt the user for the dates in Access? I can't use parameters and I don't understand how to use a prompt otyher than that.
2. How do I get those user responses into the query below
3. How do I write the querydef?

The SQL query is attached

Thanks!
Emil
 

A:Prompt&Pass value to pass-thru query

16 more replies
Answer Match 44.52%

So I've been struggling with this problem for nearly 2 months now. At first, 3 of my 6 ram sticks were bad. Had to have them replaced twice for ocz to send me a second set of functional ram. After verifying that each individual stick works, I put in all 6 again, I get 3-7 errors per pass, regardless of what settings I use for the memory. I get a replacement mobo. Run memtest again, and I get the exact same errors. The same failing address, same everything. So I have intel replace my cpu, since Asus' tech support said that was the only remaining component that could possibly be at fault. Just put in the new cpu, guess what? Same faults, same address, same everything.

When I tested everything, I ran each stick individually in the first socket of the first bank. Each passed. I ran 3 sticks, filling the first bank. All passed. I put 1 in the first socket of the first bank, and filled the second bank. Each passed. The only time it fails the test is when there are 6 sticks in. The failing address is the same, regardless of where I move the sticks, after changing motherboard, after changing the cpu.

Not sure if it shows my system to people, so in case it doesn't, I have:

i7 920 d0 and c0
Asus p6x58d
2 sets of ocz3g1600lv6gk (6 total 2gb sticks of 1600mhz ddr3)
corsair cmpsu-950tx
asus radeon 5870

I'm stumped. I have no idea what it could be, but this is starting to drive me insane.
 

A:Solved: Can't pass memtest86+...

16 more replies
Answer Match 44.52%

Where does a program which encrypts your password (that you assign it) in your computer?, is there a certain program that can search through my computer and find the password for any program installed on my computer or a certain program? I have forgotten the password and can't uninstall it without it!
 

A:Solved: Encrypted Pass.

What is the name of the utility you are trying to uninstall?
 

3 more replies
Answer Match 44.52%

O.k. I was ableto run Ad-ware but nothing else.... so here is the second scan of hijackthis..... any ideas what I need to remove from this??????
Logfile of HijackThis v1.99.0
Scan saved at 5:55:10 PM, on 1/8/05
Platform: Windows 98 SE (Win9x 4.10.2222A)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS1\SYSTEM\KERNEL32.DLL
C:\WINDOWS1\SYSTEM\MSGSRV32.EXE
C:\WINDOWS1\SYSTEM\SPOOL32.EXE
C:\WINDOWS1\SYSTEM\MPREXE.EXE
C:\WINDOWS1\EXPLORER.EXE
C:\UNZIPPED\HIJACKTHIS\HIJACKTHIS.EXE

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page =
R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,ProxyServer = 127.0.0.1:7212
R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =
R3 - Default URLSearchHook is missing
N3 - Netscape 7: user_pref("browser.startup.homepage", "http://www.msn.com/"); (C:\WINDOWS1\Application Data\Mozilla\Profiles\default\st5gwf9k.slt\prefs.js)
N3 - Netscape 7: user_pref("browser.search.defaultengine", "engine://C%3A%5CPROGRAM%20FILES%5CNETSCAPE%5CNETSCAPE%206%5Csearchplugins%5CSBWeb_01.src"); (C:\WINDOWS1\Application Data\Mozilla\Profiles\default\st5gwf9k.slt\prefs.js)
O2 - BHO: NAV Helper - {BDF3E430-B101-42AD-A544-FADC6B084872} - C:\Program Files\Norton SystemWorks\Norton AntiVirus\NavShExt.dll
O2 - BHO: (no name) - {F2A4407B-FFBC-4A1F-A18A-0F68C3E0FC9E} - C:\WINDOWS1\SYSTEM\DEKOIAW.DLL
O2 - BHO: (no name) - {198289C6-467A-1CD8-5663-393650EEA... Read more

A:Solved: second pass : HIJACKTHIS....help!

Stay in the original thread

http://forums.techguy.org/showthread.php?t=317002
 

2 more replies
Answer Match 43.68%

I am working on a batch script for my specific purpose.
The batch has launches a program like so:

Code:
start /w program.exe %1
This way I can easily pass variable to my batch using a shortcut. Like:

Code:
C:\mybatch.bat "My variable"
Because I the batch waits for the program to do its job, it could be open for extended periods of time. I find it annoying to have a batch constantly open, so looked for a way to hide it and settled on this short piece of VBS:

Code:
CreateObject("Wscript.Shell").Run "mybatch.bat",0
This is is exactly what I needed and it makes things a lot easier, with one exception. While using this VBS, I can't pass variables to my batch... or to be more precise don't know how to.
My intention is to make several shortcuts with different variables like so:

Code:
C:\start.vbs "My variable"
I want to be able to pass "My variable" to my batch, but still be able to manually launch start.vbs without any variable in a way that won't pass a random variable if it is not defined. Passing a blank variable is fine.
I have tried searching for a solution on Google, but being a total newbie to VBS, I couldn't find the right solution. Any help would be highly appreciated. Thanks in advance.
 

A:Solved: Pass a variable from VBS to batch

12 more replies
Answer Match 43.68%

I'm totally lost on this one. We have a wifi network at home using wpa/wpa2 encryption. our laptops log on just fine with the code. We have a couple of new android phones which insist on a pass phrase after the code is input. I know nothing about a pass phrase. No pass phrase shows up when I log into the router--I get ips address, gateway, and a whole mess of info, but no info about a pass phrase.

Does anyone have any idea what this pass phrase is all about and where I can find it?

Thanks.
 

A:Solved: wpa pass phrase confusion

10 more replies
Answer Match 43.68%

I have a second hard drive installed in my PC. It is primarily used for storage of important , personal data. I would like to put a password on it to limit access. Can anybody out there tell me how?

Thanks

Broly

Broly
 

A:Solved: Hard Drive Pass

15 more replies
Answer Match 43.68%

I to have the movie pass softeware and pop ups i followed previous threads on how to do the scans and reports so here they are. I am not sure what to do now as i now they are still there... i am a rookie. i think the reports are in the attachments.
 

A:Solved: Movie Pass Reports Now What do i do???

16 more replies
Answer Match 43.68%

I created a my LOg for HJT

Hi, I'm new here and I am very confused. I have had problems with movie pass. This advertisement kept popping up on my computer telling me the only way to stop these advertisements is to pay for a subscription then I could end subscription.
I had to use task manager to end the program every time it popped up to get it off my screen. I used Norton Internet Security and it said that moviepass is Trojan Horse but could not delete it. I did quarentine the files Norton detected.
I then went to Windows Live Safety Scanner and it found the files again and deleted some but said some files couldn't be deleted, however when I ran scan again it said it deleted all. The advertisements have stopped.
Today I was searching through my program files and found one file called Notifier which is empty but I shredded it anyway with Windows Washer.
I also found the file body,swf,kate.swf,notifier.exe,readout.mp3, I need to know if there is an easy way to remove this from my computer. I need help with this issue. Thank you so much! Sincerely, Confusedcompgirl
 

A:Solved: Movie Pass Plague

16 more replies
Answer Match 43.68%

Hi everyone!
I am new member in this forum and this is my first post. so I am sorry if my question is not relevant to the forum.
When I open my some websites i always get a message below address bar saying "simple pass has crashed" than the whole system gets slower.I do not have any idea about the problem.
I would appreciate If any one could explain me with this?
thank you.
 

A:Solved: simple pass has crashed

8 more replies
Answer Match 43.68%

i am cleaning out the spyware of a co-workers laptop and i noticed something in hijack this log called porn pass manager..

how do i remove this

here is a copy of the hijack this log file

Logfile of HijackThis v1.99.1
Scan saved at 4:24:31 PM, on 11/9/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exe
C:\Program Files\CA\eTrust Antivirus\InoRpc.exe
C:\Program Files\CA\eTrust Antivirus\InoRT.exe
C:\Program Files\CA\eTrust Antivirus\InoTask.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\PornPass Manager\isamonitor.exe
C:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exe
C:\Program Files\hpq\HP Wireless Assistant\HP Wireless Assistant.exe
C:\Program Files\Synaptics\SynTP\SynTPLpr.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\PornPass Manager\isamini.exe
C:\PROGRA~1\CA\ETRUST~1\realmon.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\HPQ\SHARED\HPQWMI.exe
C:\Program Files\CA\eTrust Antivir... Read more

A:Solved: Help --porn pass manager

7 more replies
Answer Match 43.68%

Logfile of HijackThis v1.99.1
Scan saved at 6:48:33 PM, on 3/14/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\System32\ibmpmsvc.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\Atievxx.exe
C:\WINDOWS\SYSTEM32\DRIVERS\ETC\CPUIDLE\srvany.exe
C:\Program Files\ewido anti-malware\ewidoctrl.exe
C:\Program Files\Norton SystemWorks\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton SystemWorks\Norton AntiVirus\IWP\NPFMntor.exe
C:\PROGRA~1\NORTON~1\NORTON~1\NPROTECT.EXE
C:\WINDOWS\system32\oodag.exe
C:\PROGRA~1\NORTON~1\NORTON~1\SPEEDD~1\NOPDB.EXE
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Java\jre1.5.0_04\bin\jusched.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Java\jre1.5.0_04\bin\jucheck.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\Olympus\DeviceDetector\DevDtct2.exe
C:\Program Files\Belkin\Belkin 802.11g Wireless Card Configuration Utility... Read more

A:Solved: Just Cleaned...Does this HJT Log Pass/Fail?

10 more replies
Answer Match 43.68%

Hi im really feeling down at the moment because somehow i seem to have got a virus on my computer called movie pass. i dont know how i got it but i want it removed off my compuer as i am still only a kid and cant afford to be sent a bill from this movie pass software! so heres what ive done, i have uninstalled the webcam service that came with it during the three day trial (using add/remove programs), then i did a virus scan with norton 2006 that didnt pick anything up but i also used lavasoft adware se and spybot search and destroy which quarantined/deleted some stuff including keyloggers. i still however know that i have a problem because i keep getting messages on my computer asking if i should continue running scripts and a movie pass url is given. i am not very good with computers but you guys are great, if you can help me i would be so happy and would be prepared to make a donation. Thanks, Pc Noob
 

A:Solved: Movie Pass Infestation!

13 more replies
Answer Match 43.68%

I have two sub in an Excel VBA sheet.

I can successfully pass one parameter, but i now need to pass two parameters from one sub to the other and gthen back again. How do i do this?
 

A:Solved: Excel VBA - How do I pass more than one parameter?

Hi there,

Have you actually Solved this or is that a mistake?

If you haven't solved it, can you post what code you have so far and explain exactly what you are trying to do here?

If you have solved it, can you post how for future board searches?
 

1 more replies
Answer Match 43.68%

Joined tda becuz I read a prev post about removing movie Pass......your instruction was very good. May I show you here what the file revealed so I can proceed: (Not waiting for your answer-Hope that's OK)

Logfile of HijackThis v1.99.1
Scan saved at 1:26:50 AM, on 4/10/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exe
C:\PROGRA~1\Iomega\System32\ActivityDisk.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\svchost.exe
c:\PROGRA~1\mcafee.com\vso\mcshield.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\AOL\1102109368\ee\AOLSoftware.exe
C:\Program Files\Logitech\iTouch\iTouch.exe
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\Program Files\QuickTime\qttask.exe
C:\PROGRA~1\mcafee.com\agent\McAgent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\Iomega\DriveIcons\ImgIcon.exe
C:\PROGRA~1\Logitech\MOUSEW~1\SYSTEM\EM_EXEC.EXE
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb10.exe
C:\Program Files\Common Files\AOL\ACS\AOLDial.exe
C:\Program Files\Hewlett-Packard\HP Software Update\HPWuSchd2.exe
C:\Program Files... Read more

A:Solved: Remove Movie Pass

16 more replies